WeAccess Windows 7 VToken Application Installation and Usage Manual

8/18/2019 WeAccess Windows 7 VToken Application Installation and Usage Manual

1/19

1

(for Windows 7 and Vista Users)

PPrroocceedduurree oonn

HHooww ttoo UUssee tthhee vvTTook k eenn

MAKER001

3fecc7ba

*******


2/19

2

A. vToken Installation (Initial use of the vToken)

Instructions

Step 1. Insert the vToken USB/flash disk to the USP port.

Step 2. Click the start windows button “ ” and click on “Computer”.

2

1


3/19

3

Step 3. Open the USB drive where your vToken USB application is located. (Ex.: Computer >E:)

Step 4. Double click on “vToken USB Application” Folder


4/19

4

Step 4. Open “prereq” folder

Step 5. Right click on “libusb-win32-filter-bin-0.1.12.1” then choose Properties


5/19

5

Step 6. Select “Compatibility” Tab

Step 7. Check “Run this program in Compatibility mode for:” then on dropdown list select“windows 2000” then click “Apply” then “OK”.


6/19

6

Step 8. Right click on “libusb-win32-filter-bin-0.1.12.1” then “Run as Administrator”

Step 9. For “Welcome to the LibUSB – Win32 setup wizard screen”, click “Next”.


7/19

7

Step 10. For “License Agreement screen, click the “I accept the agreement then Click “Next”.

Step 11. For “Select Destination Location” screen, click “Next”.


8/19

8

Step 12. For “Select Start Menu Folder” screen, click “Next”.

Step 13. For “Ready to Install” screen click “Install”.


9/19

9

Step 14. Wait until the Installation process finished.

Step 15. For “Completing the LibUSB – Win32 setup wizard” screen, click “Finish”.


10/19

10

Step 16. For “TestLibUsb – Windows Version” screen, click “Exit”.

Step 17. Upon successful installation, press any key to continue.

Step 18. Safely remove the vToken USB before proceeding to Generation of Response Code.


11/19

11

B. Log-in Procedure

Step 1. Insert the vToken USB/flash disk to the USP port

Step 2. Open the USB drive where your vToken USB application is located.

(Ex. My Computer > E:)


12/19

12

Step 3. Double click “Run.bat” to run the application.

Step 4. Loading the vToken client application screen, please wait until the Graphicalkeyboard showed up.

Note: Do not close this window.


13/19

13

Step 5. In the graphical keyboard, input your nominated 8-character vToken ID using themouse, then click “Login”.


14/19

14

Step 6. From the weAccess log-in page, input the challenge code to the “Challenge”field of the vToken Pin pad using the mouse.

Step 7. Click “Generate Response” button.


15/19

15

Step 8. Once the Response Code is generated, highlight then Copy (Ctrl + C) theResponse Code from the vToken Pin Pad to the log-in page.

Step 9. Click “Submit”


16/19

16

You will then be directed to the weAccess “Welcome Page” screen and will be ready toview and/or transact selected banking transactions through the weAccess


17/19

17

C. Transaction Authorization ProcessOnce logged-in, an authorizer who clicked a transaction with “To be Authorized” statuswill be asked to input a new response code (applicable to Auto Crediting, ATM Payroll

and Checkwriting Request modules only)

Step 1. Input the “Challenge Code” from the transaction details screen to the

“Challenge” field of the vToken Pin pad using the mouse.


18/19

18

Step 2. Once the Response Code is generated, highlight it then Copy (Ctrl + C) theResponse Code from the vToken Pin Pad to the “Response Code” field of theTransaction Details screen.

829946B8


19/19

19

Step 3. Click “Approve”.

Transaction Acknowledgment screen will appear as proof that the transaction has beenauthorized.

xxx

955946z8

Documents

WeAccess Windows 7 VToken Application Installation and Usage Manual