INTRODUCTION

TORQUEFLITEA727, A904

AUTOMATIC TRANSMISSION SERVICE GROUP18639 SW 107TH AVENUE

MIAMI, FL 33157(305) 670-4161

1

No part of any ATSG publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means, including but not limited to electronic, mechanical, photocopying, recording or otherwise, without written permission of Automatic Transmission Service Group. This includes all text illustrations, tables and charts.

The information and part numbers contained in this booklet havebeen carefully compiled from industry sources known for their

reliability, but ATSG does not guarantee its accuracy.

Copyright © ATSG 1993

UpdatedOctober, 2003

DALE ENGLANDFIELD SERVICE CONSULTANT

ED KRUSETECHNICAL CONSULTANT

WAYNE COLONNATECHNICAL SUPERVISOR

PETER LUBANTECHNICAL CONSULTANT

JIM DIALTECHNICAL CONSULTANT

GREGORY LIPNICKTECHNICAL CONSULTANT

JERRY GOTTTECHNICAL CONSULTANT

JON GLATSTEINTECHNICAL CONSULTANT

DAVID CHALKERTECHNICAL CONSULTANT

ROLAND ALVAREZTECHNICAL CONSULTANT

MIKE SOUZATECHNICAL CONSULTANT

GERALD CAMPBELLTECHNICAL CONSULTANT

We wish to thank Chrysler Corporationfor the information and illustrationsthat have made this booklet possible.

This manual contains the procedures necessary to service, repair and overhaul both the A727 and the A904 transmissions, and some of the differences between these two units. These transmissions have been with us now for over 40 years. The operation of the torque converter clutch is also covered in this booklet.