We provide knowledge, services and products for any kind

COMPANY OVERVIEWDistribuciones y Proyectos S.L

LM Lomisa

We provide knowledge, services and products for any kind of process plants

LM

LOMISA offers a complete range of technical services, in the fields of engineering of industrial plants. The services can be provided on a time and material basis, as turnkey projects or any other formula based on the clients’ demands.

LOMISA provides process basic engineering, either licensed from others or from its own intellectual property. The customer will benefit from the “know-how” and experience acquired by LOMISA.

A team of experts perform technical, economic and financial consulting work, through innovative analysis techniques. Detail engineering of all disciplines involved in an industrial project, planning and project control through highly skilled teams.

Procurement, inspection, expediting and traffic in a department exclusively devoted to the supply of equipment and materials. Our experience assures the best prices, delivery and quality, regardless of the place of manufacturing.

Quality and safety assurance through skilled resources within the LOMISA group and integrated with all the above activities. An important activity of LOMISA is the development of financing for the execution of the projects. This is done in close collaboration and with the active participation of the client to better suit his needs.

All of this makes LOMISA a very specialized company in the integrated management and development of projects with a great technological approach.

company profile

INTRODuCTION

Our BuSIneSS AreAS

Oil / Gas Pharmaceutical energy & Power Infrastructure and Industries

n Refining

n Petrochemical

n Liquefaction, Regasification &

Tanks

n Pipelines

n Clear room

n Water purification

n Clear steam

n Sanitary Pipelines systems

n Sterilization

n Pumps

n Mixing equipment

n Skids

n Valves and fittings

n Conventional thermal plants

n Cogeneration

n Renewable energy

n Steam generators

n Conventional pipeline systems

n Valves and fittings

n Field control systems

n Water treatment

n Desalination

n Metallurgy

n Waste u.R.S.

n Healthcare products & services

n Cereals Processing

n Food & Beverage

n Meat Processing, Slaughtering &

Rendering

n Pul, paper and board

2Distribuciones y Proyectos S.L

LM Lomisa

LM 3Distribuciones y Proyectos S.L

LM Lomisa

table of contents

TABLE OF CONTENTSCAST & FOrGeD VALVeS

4

InSTruMenTATIOn & FLOw COnTrOL 12

PIPeS & ACCeSOrIeS

19

MeASureMenT& AnALYTICAL

22

CheMICAL& FACILITIES

26

heALThCAre PRODuCTS & SOLuTIONS

28

TrAnSPOrTATIOn SERVICES

30

EXECuTION & PrOJeCTS

32

We know where there are the big stocks products worldwide. this allows us to say

Delivery time in stock!

VALVeS


LM Lomisa

Gate Valves

Gate valves provide optimum performance in conditions where high flow efficiency, tight shut off and long service is required. Ideal for a variety of services within many industries including chemical pulp and paper power and wastewater. For comple-te versatility the range includes fabricated, forged, and cast designs. Gate or knife valves are linear motion valves in which a flat closure element slides into the flow stream to provide shut-off. Gate valves are usually divided into two types: parallel and wedge-shaped. The parallel gate valve uses a flat disc gate between two parallel seats, upstream and downstream. Knife valves are of this type, but with a sharp edge on the bottom of the gate to shear entrained solids or separate slurries. Advan-tages include the ability to cut through slurries. Large sizes are commonly available. Disadvantages include pressure limitations, lack of cleanliness, and low shut-off.

Bolted Bonnet & Pressure Sealed type gate Valves, OS&Y

Cast AnSI / DIn valves

n Designed to ASME B16.34, API 600 AND BS 1414.n Tested according to API 598.n Bolted bonnet and pressure seal designsn Material compliance to NACE available in Carbon steel, special alloys, stainless

steel, etc.n RF and RT J flanged, butt-weld and Hub endsn Sizes range from 2” – 72”.n Pressure range from 150 PSI CWP, ANSI class 150 to 4500.

n Temperature range from -320°F to 1200°F.

Forged valves

n Designed to ASME B16.34, API 598/591 AND BS 1414 / 5352

n Tested according to API 598 / BS 5146n Bolted bonnet, welded bonnet and pressure seal desig-

nsn Material compliance to NACE available in Carbon steel,

special alloys, stainless steel, etc.n RF and RT J flanged, butt-weld, socket weld, NPT and Hub endsn Sizes range from 1/2” – 20”n Pressure range from 800 PSI, ANSI class 800 to 4500n Temperature range from -320°F to 1200°F

CAST & FORGED / ANSI / DIN VALVES

OIL/GAS, enerGY & POwer


LM Lomisa

Globe Valves

Sophisticated carbon steel, stainless steel and special alloy globe, wi-dely utilized in process industries worldwide including offshore, oil and gas. Also includes designs for specialist services such as cryogenic, high pressures, large sizes and nuclear applications.

Bolted Bonnet & Pressure Sealed type globe Valves, OS&Y

Cast AnSI / DIn valves

n Bolted bonnet, no-bonnet joint, angle, T-pattern, Y-pattern and pressure sea-led designs

n Cast and forged alloy designs

n Size range from 1/4” – 24”

n Pressure range from ASME 150# to 4500#

n Temperature range -50°F to 1200°F

Forged valves

n Designed to ASME B16.34, API 598/591 AND BS 1414 / 5352

n Tested according to API 598 / BS 5146

n Bolted bonnet, welded bonnet and pressure seal designsn Material compliance to NACE available in Carbon steel, special alloys,

stainless steel, etc.

n RF and RT J flanged, buttweld, socket weld, NPT and Hub ends

n Sizes range from 1/2” – 20” n Pressure range from 800 PSI, ANSI class 800 to 4500.n Temperature range from -320°F to 1200°F

CAST & FORGED VALVESOIL/GAS, enerGY & POwer


LM Lomisa

Check Valves

A range of non-return valves suitable for oil, gas, water, refining, power and chemical applications where the prevention of flow reversal is mandatory. Check valves can be supplied in wafer or full body, cast, fabricated or forged body designs for high-pressu-re applications or lined to meet specific requirements within the chemical industry.

Bolted Bonnet & Pressure Sealed type Check Valves

n Designed to ASME B16.34, BS 1868 and API 6D n Tested according to API 598 n RF & RT J flanged buttweld, hub and wafer ends n Bolted bonnet or Pressure Seal designsn Swing lift (“T or y pattern”) and tilting disc designn Material compliance to NACE n Size range 2” – 72” n Pressure range from 150 PSI CWP, ANSI Class 150 to 4500 n Temperature range from -320°F to 1200°F

wafer Check Valves

High capacity, swing type check valves for general applications

n Size range from Size range from 2” - 48” n Pressure ratings from ANSI 150/300

Fully lined ball check valves / sight glasses

These PFA lined products offer a reliable solution in ha-zardous applications.

n Size range from 1” – 3” n Pressure range to 232 PSI n Maximum Temperature 392°F

Flanges per ANSI 150, DN PN 16, BS 10 D/E, AS 2129 or JIS 10K on request.


VALVeS OIL/GAS, enerGY & POwer


LM Lomisa

Ball Valves

An extensive range of full and reduced bore ball valves serving a wide spectrum of applications in the chemical, pharmaceutical, oil, petrochemical and allied process industries. Available as lined, flanged, wafer and screwed/welded, metal or soft sea-ted incorporating either floating or trunnion mounted designs for shut-off or control. Also suitable for cryogenic and corrosive services.

n Manufactured to ANSI or DIN standards

n Fully PFA lined valves available n 1, 2 & 3 piece body designs n 3-Way valves

n Flanged, screwed, weld or special ends

n Firesafe or non-firesafe n Sizes from ¼” - 60” n Pressure range from ANSI Class 150 to 2500

n Temperature range from -320°F to 750°F

n Manual or gear operated

Butterfly Valves

In Cast iron, Nodular iron, Carbon steel, alloy steel, & stainless steel, PTFE, etc

n Types: Wafer, Flanged, Monoflange, seccioned & Lug.

n Replaceable or vulcanized seat

n Wide choice of seat elastomer

n Firesafe or non-firesafe,

n Sizes from ¼” – 110”

n Pressure range from ANSI class 150 to 300

n Temperature range from -320°F to 750°F



LM Lomisa

rotary Process Valves

The triple offset, metal-seated for rotary process valve is the ideal solution to achieve perfect shut-off in oil, gas, offshore, chemical and petrochemical applications. Rotary processes valves are available as wafer, lugged, double flanged, welded and are also suitable for cryogenic services.

n Manufactured to DIN or ANSI standardsn Bidirectional, zero leakage according to API 598n Inherently firesafen Size range from 3” - 84”n Pressure range from ANSI class 150 to 1500 and PN 10 to PN 160n Temperature range from -425°F to 1500°F

Knife Gate Valves

Knife Gate

Application experience covers the entire spectrum, Mining, Pulp and Paper, Power, Chemical and Petro-Chem, Waste Treatment, Steel, Food & Beverage, Powder & Bulk and other process industries.

Valve Polymer Lined Knife Gate and Slide Gate Valves

Valve knife gate and slide gate products, full port and positive seal packing. They provide unequaled performance in a variety of applications.

Special Application Knife Gate Valves

Products for high performance, bolted body knife gate, the solid cast S20 metal to metal seated knife gate, slide gate valves, bonneted knife gate and other special application valves each with its own unique performance and design features. This assures you the right valve for your application.

Custom Design Valves

We have unequaled experience in applying, designing and building all metal or polymer lined custom valve designs using most any wel-dable alloy. This gives you flexibility of design you cannot get in a cast product. Valves are designed and built to your exact specifications.




LM Lomisa

hygienic Valves

Hygienic valves have been specially designed for sanitary and aseptic applications in the dairy, brewing, beverage, pharmaceutical and bio-che-mical industries. The range incorporates the butterfly valves, suitable for isolation and control services. Pneumatically operated process valves can be supplied as complete flow matrices for full automation. Process val-ves are available as double-seated, angle/multi-way, changeover and tank bottom valves. Butterfly valves are available as wafer or lugged. In 3-A standard /SMS, CLAMP, DIN 11851/11850, material 304L and 316L, finish 0,8 RA, all connections.

Butterfly Valves

n Split body designn Size range from DN25 to DN300n Pressure range from vacuum to PN10n Temperature range from -40°C to 120°C

Ball & Process Valves

n EHEDG approvedn Multiple design options n Size range from DN10 to DN150n Maximum pressure range 5 bar above and below seat (with 6 bar air supply)n Maximum temperature +110°C

hygienic Integrated Jacketed Manifolds

Designed to customer specifications and up to 150 process valves per manifold. With Jacketed and electronic control heads available.

Pressure relief Valves

You have the choice for pressure relief devices. Number one for range of product and number one for quality of manufacture and performance.

n Direct Spring Operated Pressure Relief Valvesn Pilot Operated Pressure Relief Valvesn Environmental Protection Productsn Speciality Productsn Tank Blanketing



LM Lomisa

Safety & environmental Valves

Pressure Relief Valves, Flame Arresters, Manhole Covers, Regulators, Floating Suc-tion units.

n Sizes: 15 mm (½”) ÷ 250 mm (10”)n Material: Carbon steel, bronze, Stainless steel, Nodular cast iron, Hastelloy, etc.n Connections: Flanged, clamp or BSP and NPT threaded.n ratings: DIN Pn10 ÷ Pn 100 & ANSI 150, 300 & 600 lbs.

Slurry Valves in different types

Field proven, heavy duty, trouble-free slurry valves for abrasive, corrosive and coarse slurries. Slurry valves are in more appli-cations service around the world than any other type in a broad range of applications.

Angle Isolation Valves

This hydraulically operated isolation valve has been designed for the alumina industry or other application where built up scale or settled slurries needs to be cleared to allow flow.

n Pressure: up to ANSI 150n Temperature: up to 230°Cn Sizes: 200 to 600mmn end Connections: ANSI 150

Butterfly Valves

The quarter turn metal and ceramic seated valve series specially designed for severe service in controlling aggressive slurries.

n Pressure: up to 1400 kPan Temperature: up to 150°C n Sizes: 40 to 600mmn end connections: ANSI, AS 2129, DIN.

Pinch Valves

Pinch valves include any valve with a flexible elastomer body that can be pinched clo-sed, cutting off flow, using a mechanism or fluid pressure. Pinch valves are full bore, linear action valves so they can be used in both an off/on manner or in a variable position or throttling service. Some typical applications for pinch valves are medical, pharmaceutical, wastewater, slurries, pulp, powder and pellets. They can effectively control the flow of both abrasives and corrosives, as there is no contact between metal parts and the transport media.




LM Lomisa

Advantages: Streamlined flow, high coefficient of flow. Disad-vantages: limited materials, low shut-off capabilities, low pres-sure limits.

n Pressure: 1600 kPan Temperature: up to 100°Cn Sizes: 25 to 500mmn end connections: ANSI, AS 2129, DIN.

Bronze / brass valves

Brass comes with good strength, excellent high temperature ductility and reasonable cold ductility, good conductivity, excellent corrosion resistance, good bearing properties and low magnetic permeability. Sintered bronze is a porous material, which can be impregnated with oil, graphite or PTFE. Not suitable for heavily loaded applications but useful where lubrication is inconvenient.

n Types: Ball, Gate, Globe and Check.n Sizes: ½” to 6” (Depending on the type)n Connections: Flanged and BSP / NPT threadedn rating: DIN Pn16 ÷ Pn64 (125 ÷ 200 WSP/300 ÷ 600 WOG.)

Steam Traps

Drip and Tracer (repairable)

Drip and Tracer Type Steam Traps provide discharge of condensate from steam line drip, steam tracing, turbine drains, and soot blowers in light to medium processes.

Drip & Tracer (non repairable)

Drip and Tracer Type Steam Traps provide discharge of condensate from steam line drip, steam tracing, turbine drains, and soot blowers in light to medium processes.

Process Thermostatic

Thermostatic traps react to changes in temperature and therefore discriminate very well between steam and cooler non condensable gases. They can rapidly purge air from a system, especially on cold startups.

Process Thermodynamic

Thermodynamic traps are phase detectors in that they can discriminate between condensate and steam. The main thermodynamic feature that is desirable in process appli-cations is the hot-running design and responsiveness to load changes.


We offer our customers a complete range of products that cover the entire steam and condensate loop from spare parts, steam trap stations, a complete plant room package, a blowdonwn valve to a complete boiler house. Whatever your requirement we can help you.

In addition you have the reassurance that all of the products we sell, we hnow what we are offering you, we can advise you technically, and continue to support you after you buy.

We have the most comprehensive range of products available from one company, anywhere in the world.

Distribuciones y Proyectos S.L

LM Lomisa12

INSTRuMENTATION & FLOW CONTROL SOLuTIONS

LOMISA is in position to offer the customer a source flow control products and can be tailored to satisfy customer’s specific needs.

We work in close partnership with our clients to achieve quantum leaps in efficiency through better design, manufacture, project management and service. By unders-tanding what you want to achieve, what your expectations are, we can provide you with the best solutions that fit your business. Whether you require a one-off com-ponent or a Total Solution installation and a maintenance package, you can be sure LOMISA offers you the Total Flow Control Solutions you need.

Instrumentation

hand Valve Products

Suitable for all instrument isolation duties, giving you bubble tight shut-off time after time, with metal or soft seats for gas, vapor or liquid applications.

Gauge Valve Products

Include multi-port and block and bleed styles suitable for gauge isolation, calibration and venting with a choice of either globe pattern or through-bore designs.

Manifolds

The largest and most innovative range of differential pressure flow manifolds available in the world, with models available for every kind of D/P instrument.

Primary Isolation Valves

Meets both instrument and piping engineers’ specifi-cations, offering significant savings on space, weight, installation and cost.

enclosure Systems

A strong weatherproof barrier for every type of instrument installation, both on and offshore. They have been successfully installed in the harshest industrial climates in the world.

Modular Mounting Systems

The Modular Mounting System for instrument impulse line installations has particu-lar applications in the petrochemical and refining industries.

AccuMount Systems

ACCu-Mount system is designed for the installation of instruments on fiscal mete-ring applications.

Accessories

A range of accessories complementary to instrument valves and manifolds allow maximum versatility and flexibility. Accessories include bleeder valves, gauge adap-ters and gauge syphons, kidney flanges (futbols) and air distribution manifolds and thermowells.

InSTruMenTATIOn OIL/GAS, enerGY & POwer


LM Lomisa 13

FLOw COnTrOL

Control Accessories

A diverse range of valve, actuator and control accessories are available to suit all requirements. Offering solenoid valves and position monitor devices, mounting kits and smart positioners which can be seamlessly integrated to create complete flow control packages. We can also provide their core products, valves and actuators, with all the latest FieldBus Network protocols.

n Control Valvesn Solenoidsn Pneumatic positionersn Smart Positionersn Actuatorsn Mounting Kits

Control Valves

Are used in the industry to control parameters such as flow, pressure, tem-perature, conductivity, pH, level, etc. The globe valves are the most com-monly used, also ball, diaphragm, butterfly, or even plug valves can be used. Normally with pneumatic actuators, and electro pneumatic positioners are mounted, though there is also the possibility of using regulating with electric actuators. The transmitters are in 4-20 MA, Modbus, or Fieldbus connectivity.

Globe valves

Globe valves are linear motion valves with rounded bodies, from which their name is derived. They are used widely in industry to regulate fluid flow in both on/off and throttling service. Advantages include precise throttling and control, as well as high-pressure limits. Disadvantages include low cleanliness and the inability to handle slurry.

Ball valves

Ball valves provide tight shut-off and characterizable control. They have high ran-geability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves. Advantages include ease of operation and high flow, high pressure, and high temperature capabilities. Disadvantages inclu-de low cleanliness and an inability to handle slurries.

Balancing valves

Balancing valves are mixing valves that maintain a constant water tempe-rature by balancing hot and cold supply lines. They are able to compensa-te for a pressure drop in either supply line and can maintain a consistent temperature. Balancing valves are sometimes referred to as pressure-balancing valves.



LM Lomisa


14

Butterfly valves

Butterfly valves control the flow of gas or liquid with a disk which turns on a diametrical axis inside a pipe, or by two semicircu-lar plates hinged on a common spindle, permitting flow in only one direction. They are used as throttling valves to control flow. Butterfly valves offer a rotary stem movement of 90 degrees or less in a compact design. unlike ball valves, butterfly valves do not have pockets in which fluids may become trapped when the valve

is closed. Advantages include suitability for chemical services, small dimensions, and high coefficient of flow.

Disadvantages include low cleanliness and the inability to handle slurries.

Plug valves

Plug valves, also called cock or stop-cock valves, date back to ancient times, whe-re they were developed for use in citywide Roman plumbing systems. Today, they remain one of the most widely used valves for both on/off and throttling services. Their design is fairly simple; the body is comprised of three main parts: body, cover and plug. The plug is a cylindrical, tapered, or generally cone-shaped device that can be raised or lowered within the seat to maintain, restrict or completely shut off flow. The valve is opened by rotation with the plug itself being the only element that is capable of movement. Advantages: Easy operation, medium to high flow, good shut off. Disadvantages: Low cleanliness, inability to handle slurry.

Diaphragm valves

Diaphragm valves are related to pinch valves, but use an elastomeric diaphragm instead of an elastomeric liner to separate the flow stream from the closure ele-ment. Instead of pinching the liner closed to provide shut-off, the diaphragm is pus-hed into contact with the bottom of the valve body. Diaphragm valves are excellent for controlling the flow of fluids which contain suspended solids. They also offer the flexibility of installation in any position. Diaphragm valves are used widely in the phar-maceutical, food processing, and water treatment industries. Advantages include cleanliness and tight shut-off. Disadvantages include low pressure and temperature limits, and multi-turn operation.

Two / Three – way and Four-way solenoid valve and accessories

Features

n NEMA 4 or NEMA 4, 7, and 9 Explosion Proof ratings available n 5/2, 5/3 or 3/2 functions availablen Flexible Lip seal ensures reliability and long service life

FLOw COnTrOL OIL/GAS, enerGY & POwer


LM Lomisa 15

FLOw COnTrOL

n Class F coil is standard for NEMA 4 units. Class H coil is standard for NEMA 7 units

n Manual override capability simulates solenoid coil operationn Continuous duty

n Air supply filtered, lubricated or non-lubricatedn High flow rates

n Remote mounting via sub-base

Specifications

n Body: Aluminumn Coil housing: NEMA 4-Steel or Epoxy Molded (DIN) enclosure; NEMA 4, 7, and

9, IP65/CSA uL listed explosion proof CRS constructionn electrical Connection: 1/2” NPT conduit entry standard, DIN connection avai-

lablen Air Connections: Supply: 1/4” NPT (Port 1)n exhaust: 1/8” NPT (Ports 3 and 5) Keystone® mounting 1/4” NPT (NA-

MuR and inline)n Flow: Three-Way - 0.055 Cv. Four-Way Keystone® Mounting - 0.7 Cv

Four-Way Inline - NAMuR 1.8Cv.

n Seals: NBR

Pneumatic Positioners

Conventional pneumatic positioners receive a pneumatic control signal and transla-te that into the appropriate pneumatic output signal to the control valve actuator. This positioner technology has been the stalwart for the process control industry for decades, and is still extensively used. We have a variety of pneumatic positioners to meet almost any need a customer may have.

n Negligible bleed lapped spool and matched sleeve design delivers significant energy savings in the form of extremely low air consumption

n Easy calibrationn Zero and span adjustment are dynamically independentn Corrosion resistant aluminum enclosuren NEMA 4, 4X enclosuren Beacon visual position monitor availablen Integrated position feedback sensor capability



LM Lomisa


16

electro-Pneumatic Positioners

Electromechanical positioners are conven-tional pneumatic positioners that have an additional integrated electro-pneumatic transducer. The transducer receives the DC analogue input signal from the control system and converts it to a proportional pneumatic signal which is then sent to the conventional positioner Almost every Fisher® pneumatic positioner has the option of adding an integrated electro-pneumatic transducer. This option allowing customers to upgrade their exis-ting control technology while continuing to use their current reliable Fisher positio-ner technology they are comfortable and familiar with.

Smart positioned is enhanced by the ability to customize the control action, set travel limits and monitor valve position. The embedded menu driven program, ac-cessed via the integrated keypad, eliminates the need for additional or remote soft-ware. Data logging of valve performance will assist maintenance diagnostics whilst adaptive action helps to compensate for changes in supply air pressure and stem friction. Having travel switches and a 4-20 mA retransmission as standard it is easy to monitor the valve in operation.

All units are supplied with standard mounting kit conforming to IEC60534-6-1 for lined actuators or VDI/VDE 3845 for rotary actuators making them quick and easy to assemble. They operate on a non mechanical magnetic feedback system which is very easy to set-up and will not suffer wear, vibration or dirt problems. A simple auto stroke routine makes it extremely quick and easy to commission and the keypad provides trouble free navigation through the menu system. Manual operation is avai-lable at the touch of a button.

electric actuator

Electric actuators are used for the automation of industrial valves and can be found in all kinds of technical process plants. They play a major part in automating process control.

Motor

Robust asynchronous three-phase AC motors are mostly used as the driving force, for some applications also single-phase AC or DC motors are used. These motors are specially adapted for valve automation as they provide higher torques from standstill than comparable conventional motors, a ne-cessary requirement to unseat sticky valves. The actuators are expected to operate un-der extreme ambient conditions, however they are generally not used for continuous operation since the motor heat buildup can be excessive.



LM Lomisa 17

FLOw COnTrOL

Limit and torque sensors

The limit switching measures the travel and signals when an end position has been reached, the torque switching measures the torque present in the valve. When exceeding a set limit, this is signalled in the same way. Actuators are often equipped with a remote position transmitter which indicates the valve position as continuous current or voltage signal.

Gearing

A worm gearing is used to reduce the high output speed of the electric motor. This enables a high reduction ratio within the gear stage, leading to a low effi-ciency which is desired for the actuators. The gearing is therefore self-locking i.e. it prevents accidental and undesired changes of the valve position by acting upon the valve’s closing element. This is of major importance for multi-turn actuators which are axially loaded with the weight of the gate valve disc.

electro-hydraulic valve actuator

Normally is a self-contained electro-hydraulic valve actuation solution available for both quarter-turn and linear applications. The actuators incorporate sophisticated electronics that provide non-intrusive set-up and interrogation via an infra-red hand held remote. They are suitable for on/off, modulating and emergency shutdown du-ties in applications.

n Linear thrust output 1.7 to 5500kNn Quarter-turn torque output 65 to 600,000Nmn Single-, three-phase or 24VDC power supply optionsn Non-intrusive infrared setting & configurationn LCD display for position, pressure, diagnostics and fault indicationn Optional bus communications via all major protocolsn Partial stroke test capabilityn Watertight or explosion proofn Double-sealed terminal compartmentn ATEX, FM, CSA, IEC and GOST certified

The linear actuators offer the advantages of compact size, high performance and a simple but highly reliable design. They are ideal for operating on/off and control functions of both globe and wedge gate valves. Both spring-return and double-acting configurations are available with either pneumatic or hydraulic cylinders.

n Electroless nickel-plated cylinders, chromium-plated piston rods. n Hammer blow and standard valve stem coupling designs available.

n Thrust up to 5,500,000 N (1,236,000 lbf).



LM Lomisa18


Pneumatic valve actuator

Its scotch yoke design is particularly suited for valves with high start or end torque requirements. Available in double-acting and spring-return configurations with tor-que output up to 4,400Nm (38,700 lbf-in). The range is available in a variety of configurations and an extensive range of options and accessories is available.

Range Configurations

n Standard Steel Cylindern Fire safen High Torque Compact Actuatorn Degree Actuatorn Dosing Actuatorn Explosion Proof Switch Boxn Inductive Limit Switchn Mounting Kits



LM Lomisa 19

PIPeS & ACCeSOrIeS

PIPES & ACCESORIES

Pipes ASTM carbon steel and alloy

n A-53 Black and galvanized carbon steel pipe, with our without welding, for high temperature orders required. Grades: A, B, and C

n A-106 Carbon steel pipe without welding for high temperature orders required. Grades: A, B and C

n A-200 Steel pipe of medium alloy for refineries orders required. Grades. T4, T5, T7, T9, T91, T11, T21 and T22

n A-333 Steel pipe with or without welding for low temperatures orders required. Grades: 1, 3, 6. 7 and 8

n A-335 Steel pipe of ferriticous alloy with or without welding for high temperatu-res orders required. Grades: P1, P2, P5, P7, P9, P11, and P22

n Pipe in carbon steel with or without welding ERW for high temperatures orders required

Pipe in stainless steel

n A-312 Pipe in 304L-316L stainless steel, with or without welding, in all its grades.

n A-358 Pipe in 304L-316L stainless steel with welding, for high temperatures orders required.

n A-270 / DIN 11850 pipe in 304L-316L stainless steel, with or without welding, of 1” to 4” NPS, of 1,0 mm to 2,0 mm thickness, 3-A grades, RA ≤ 0,8

DIn / ISO, pipe carbon steel and alloy

n DIN 2440 and 2441, pipes with or wi-thout welding, threaded or not, black ones or galvanized.

n DIN 2448, pipes with or without wel-ding, threaded or not, black ones or galvanized.

n DIN 2458 pipes with or without welding, threaded or not, black ones or galvanized. ISO 65. Pipes with or without welding.

B.w. Accessories in carbon steel and alloy

n A234. Pipe´s accessories for high to moderate temperature orders required.n A420. Pipe ´s accessories for low temperatures orders required in all its gra-

des.n A860. Pipe ´s accessories very little alloy and with high elastic limit.n Schedule 20 to XXS



LM Lomisa20

B.w. accessories in stainless steel

n A403. Pipes accessories in 304L/316L stainless steel

n B.W. Elbows from 45º, 90º up to 180º, short or long radium

n B.W. Tees, reduced or all the same onesn B.W. Eccentric and concentric reductionsn B.W. Capsn ANSI NORM B 16.9n Size from 1/2” up to 48”n Schedule 5 to 80

SMS, rTJ, IDF, DIn, BSP, CLAMPS, flanged and plain-ended stain-less steel Fittings

n In material traceability to BS EN 10204, 3-A Std., RTJ (BS4825), DIN (11851/118643) SMS (304L-316L), IDF (BS4825), PLAIN ENDED (BS 4825, ASTM A269, ASTM A270, ASTM A312) it’s a hygienic and sanitary fitting which has a crevice free design and sections of line can be easily removed, enhancing

the union´s suitability for use frequently dismantled systemsn Elbows, curves from 45º, 90º up to 180º, short or long

radiumn Tees, reduced or all the same onesn Eccentric and concentric reductions

n Capsn Ferrulesn Nuts and unions

n Nipplesn Clampsn Valves

ASA forged flanges

n A105. Forged accessories for pipesn A182. Specification for forged flanges in alloy or stainless steel for pipesn WELDING NECK, SOCKET WELD, SLIP ON AND BLINDn norm for B 16.5, BS 3293, ASME B16.47 A/Bn Pressures: 150, 300, 600, 900, 1500, and 3000

poundsn Schedules: Sch. 5S, 10S, 10, 20, 30, 40S, 40, STD,

60, 80, XS, 100, 120, 140, 160, and XXSn Size from 1/4” up to 72”

PIPES & ACCESORIES

PIPeS & ACCeSOrIeS OIL/GAS, enerGY & POwer


LM Lomisa 21

DIn Flanges

n DIN 2573 and 2576 flangesn Welding neck flanges from DIN 2630 to DIN 2638n Collar flanges DIN 2641 and 2642n Blind flanges 2527n Materials C22.8, C 33.3/8, stainless steel and alloyn Pressures: From PN-6 to PN-400n Size: From DN10 - 1000

Forged accessories

n A105. Forged accessories for pipesn A182. Specification for forged flanges in stain-

less steel/alloy for pipesn Bushings, 45º and 90º elbows, TES, fe-

male unions, CAPS, SOCKOLETS, WELDO-LETS, NIPPLES, LATROLETS, COuPLINGS, REDuCED COuPLINGS, uNIONS

n NPT AND S.W. connectionsn Pressures: Class 3000 and 6000 pounds

n Size from 1/4” to 4”

hex Bolt, hexagon head Bolts, hex nuts Screws

n Standards: DIN601, DIN558, DIN931, DIN933, DIN960, DIN961, DIN7990; ISO4014, ISO4015, ISO4016, IS04017, ISO4018; ANSI/ASME B18.2.1 A6; ANSI/ASME

n Diameter: M4 - M36 1/4’’ - 2.1/4’’n Length: 6 - 200mm 1/2’’ - 8’’n Material: SS201 202 304 316, A2/A4, A193 B7 &

A194 2H

PIPeS & ACCeSOrIeSOIL/GAS, enerGY & POwer


LM Lomisa22

Pressure

n Bourdon Tube Pressure Gaugen Brass Bourdon Tube Pressure Gaugen Pressure Gauge w/ Analog Output n Digital Pressure Gauge w/ Analog Outputn SS Pressure Gauge w/ Switchn Membrane Diaphragm Seal for High Temperaturen Compact Pressure Switchn Differential pressure transmittersn Barometric pressure transmittersn Pressure transmitters relative and absolute

Temperature

Temperature Monitoring

n Digital Temperature Switchn Temperature Switch for Liquidsn Bi-Metal Temperature Switchn Temperature Switches

Temperature Measurement

n Stainless Steel Digital Temperature Indicator/Transmittern Temperature Transmittern Digital Temperature Sensorn Gas Filled Capillary Thermometern Thermowells for Stem & Capillary

Thermometersn RTD Temperature Probesn Integrated Temperature Transmitter

(HART, Filbus, Profibus)n Infrared Thermometer

MEASuREMENT & ANALYTICAL




LM Lomisa 23

Level

Level Monitoring

n Vibrating Level Switchesn Conductive Level Switchesn Compact Conductive Level Switchn Optical Level Switchn Liquid Level Switchn Magnetic Float Switches for Liquidsn SS ultrasonic Level Switchn Heavy Duty Level Switchn Static Pressure Level Switch

Level Measurement

n Liquid Level Transducern Economical Level Indicatorn ultrasonic Level Transmittern Capacitance Level Transmittern Capacitance Level Proben Rigid RF Capacitance Tri-Clamp® Level Proben Deep-Well Probe

Flow

Low Volume Flowmeter and Switches

n Armored Low Flow Flowmeter / Switch / Transmittern All Plastic Low Flow Flowmeter & Switchn Low Volume Flow Switch for Liquids or Gasesn Low Volume Glass Tube Flowmetern Flowmeters and Switchesn Low Volume/All-Metal Flowmeter

Variable Area Flowmeter and Switches

n Flap Type Variable Area Flowmetern High Accuracy Glass Tube Flowmetersn All-Metal Armored Flowmetersn Viscosity Compenstaing Flowmeter and Switchn High Pressure All-Metal Flowmeter & Switchn High Accuracy Glass Tube Rotametern Float Type Flowmeters & Switches




LM Lomisa24

Flow (cont.)

Paddle Type Flowmeter and Switches

n Paddle Flow Switch with Integral T-Piecen Flap Flowmetersn Paddle Bellows Flowmeters and Switchesn Paddle-Bellows Flowmeter & Switch

Flow Measurement without Moving Parts

n Compact Thermal Flow Switchn Temperature Compensating Thermal Flow Switch for Liquidsn Calorimetric Flowmeter and Switchn Mass Flowmeter for Gasesn Magnetic Inductive Flowmeter for conductive liquids and slurriesn Vortex Flow Meters and Counters For Gases, Steam and Liquidsn ultra-Rugged Differential Pressure Flowmeter

n Oscillator Meter for Gases and Liquidsn ultrasonic Flowmeters for Liquid Analog and Pulse Outputn Magnetic-Inductive Flowmetersn General Purpose Coriolis Mass Flowmeter

Control Devices and relays

n Compact Local Electronic Displayn Controllers/Transmittersn Rate Meter, Totalizer & Batchern Instrinsically Safe Relay/Power Supplyn Latching Relayn Frequency to Current Converter

Analytical

n Chlorine n Conductivity n Explosive Gases n Toxic Gases n Opacity n Dissolved oxygen n pH n Turbidity

MEASuREMENT & ANALYTICAL




LM Lomisa 25



Examples of the Pipe control systems covering a large range of steam products and applications in everyday use

Boiler house

n TDS automatic controln Botton blowdownn Boiler off-taken Feedtanksn Heat recoveryn Level control & alarms

Condensate & Flash Steam recovery

n Condensate recoveryn Flash steamn Contamination control

Clean Steam

n Generatorsn Filter stationsn Pressure reducing stationsn Steam trapping stations

Process

n Heat Exchangersn Air Heater Batteriesn Tanks & Vatsn Jacketed Pansn Pressesn Accumulatorsn De-superheatersn Storage Calorifiers


LM Lomisa26

Chemical & Facilities

with a small team of highly specialized, we have succeeded in creating a large market in which they integrate the study of the problem, the most appropriate technical solution and monitoring. Specialty Chemicals have an r & D laboratory and our team of Project engineering and Installations of production.

Product range

n CPQ ACEC: Cutting fluids for aqueous and non aqueous metal machining. n CPQ adiplus: Additive for caustic soda for cleaning in the food industry. n CPQ alutrat: Products for the treatment of aluminum and its alloys. n CPQ antimousse: Defoamers specific for all types of applications. n CPQ aqualimp: Products for the treatment of swimming pools. n CPQ autosystem: automated installations for the application of chemicals. n CPQ bionet: special compounds for application in biotechnology industry and

communities. n CPQ Cintex: Lubricants for conveyor belts in food industry packaging. n CPQ compact: Detergents combined for simultaneous cleaning and disinfec-

tion. n CPQ comfort: Cleaning and disinfection for the livestock sector. n CPQ dermogel: Products for cleaning and disinfecting hands. n CPQ desnet: neutral detergent to the metallurgical industry. n CPQ dinfex: Disinfectants specific multiple applications. n CPQ domus: Range of hydraulic oils. n CPQ esmaltex: Detergents and passivating for steel parts. n CPQ filtrex: Clean filters and ultra filtration membranes and reverse osmosis. n CPQ gamma: It includes a series of auxiliary products for industrial applications

(floor cleaning, detergents, textile washing, etc.).n CPQ ideal: scaling of detergents and acidic for general industry. n CPQ inihox: passivating corrosion inhibitors in the metallurgical industry. n CPQ plus: complete alkaline detergents for industrial use. n CPQ profclean: Cleaning and professional disinfection of communities. n CPQ ta: Special products for water treatment. n CPQ topfoam: Detergents for cleaning and disinfecting surfaces with foam

(debris syrups, i.e.)

CHEMICAL & FACILITIES

CheMICAL& FACILITIeS

INFRASTRuCTuRE AND INDuSTRIES


LM Lomisa 27

wide range of application by sectors

By being sensitized on issues of the Quality, the Risk Management and the Environment we guarantee that:

n Our products for the food industry have the appropriate health registration nº 37 - 00053 / B.n Our System of Quality Assurance is based on the uNE - EN ISO 9001: 2000 certified by AenOr with

registration No ER-0525/1996 achieved in April 1996. n We have developed a precise system of technical specifications, safety data sheets, analytical methods,

control, etc.n Our Environmental Management System Standard ISO 14001 under No MA-0101/02 on Environment,

which encompasses all of our production activity to minimize their environmental impact.

The main objectives for the improvement in our productions are the follows:

1. To achieve total quality with minimal environmental impact.2. To minimize the maximum discharges of water and that they always meet the parameters of release. 3. To controller the manufacturing process to reach the minimum generation of waste.4. The scrupulous compliance of waste collection and by always seeking the recovery of waste generated,

rather than its mere destruction. 5. The keeping our service agility.

CheMICAL& FACILITIeS

n Machining, lubrication, cleaning and surface treatment in the Metallurgic Industry

n Hygiene, lubrication and disinfection in the food industry

n Water treatment

n Cleaning and disinfection institutional and collectives

n Project Engineering and Facilities for the use of our products, giving an assistance service to our clients.

n Motor vehicles and auxiliaryn Treatment of aluminum and its alloysn Various (Glazing, Electroplating, drawing,

drawing, etc.)

n Dairy Industryn Brewing Industryn Meat industryn Industry mineral waters and soft drinks.n Production of wine

n Treatment and prevention of legionella pneumophila

n Wastewater treatment (physical, chemical, evaporators, centrifuges)

n Treatment and maintenance of pool water

n Industrial Laundriesn Cleaning and disinfecting services companiesn Hospitals, hotels and restaurants

n Centralized Lubrication Systems bottle conveyors

n Automatic dosing and control in all types of industries. IPC’S

n Foam projection systems at low and high pressure

n Thermo-compression evaporators and heat.n Centrifuges.n Various.



LM Lomisa28

Our division focused on countries where our technical and human contribution could result efficient for improving the quality of life, we provide technical, human and ma-terial that mark the difference and cover as minimum the basic needs.

Our main objective is the improvement of health system at central and re-gional level, strengthening central and regional health administrations, in order to diminish the population mortality.

Our services provided: • Institutional support • Central and regional services for health planning • Planning of Hospitals • Planning of management of health as-sistance networks • Identification of needs of the medical equipment • Identification of investment needs • Quality and efficiency improvement in health assistance ser-vices.

The prices of our equipment always include support for installation, ad-justments, commissioning, technical training and preventive and corrective mainte-nance during the warranty period.

heALThCAre PRODuCTS & SERVICES


Clinical Specialties Nuclear Medicine

n Anesthesiology n Cardiology n Oncology n Orthopedics n Surgery n Women’s Healthcare

n SPECT/CT n PET/CT n Workflow Solutions

Computed Tomography Preclinical Imaging

n Scanners n Workflow Solutions

n MOSAIC HP n Nano SPECT/CT n IMALYTICS Workspace

Diagnostic ECG Radiation Oncology

n ECG Management n Holter Monitoring n Page Writer Cardiographs n Stress-Test Systems

n Radiation Treatment Simulation n Radiation Treatment Planningn Image-guided Radiation Therapy (IGRT)n Magnetoencaphalography (MEG)n Neuroscience. Fully integrated stereotactic radiation

therapy system

Emergency Care & Resuscitation Radiography

n Automated External Defibrillators n Advanced Life Support Products n Data Management Solutions n Temperature Modulation Therapy n Heart Start AED Services n Supplies & Accessories

n Analog Radiography n Digital Radiography n Computed Radiography n Mobile Radiography

Fluoroscopy Refurbished Systems

n Interventional Fluoroscopy n Diagnostic Fluoroscopy

n Refurbishment Process n Products n Trade-in n Customer Experiences

Healthcare Informatics Respiratory Care

n Cardiology Informatics n Enterprise Imaging Informatics n Applications & Workstations n Acute Care Informatics

n Noninvasive ventilation n Acute care ventilation n Patient Interfaces n Pre-hospital CPAP



LM Lomisa 29


Home Healthcare Supplies

n Heart Start Home Defibrillator n Lifeline Medical Alert n Home Respiratory n Remote Cardiac Services n Sleep Therapy

n SpO2 Sensors and Cables n NIBP Cuffs n Gas Monitoring Supplies n Fetal Monitoring Supplies n Telemetry Cables & Leads n Cardiac Output n Invasive Blood Pressure Supplies n More supplies and accessories

Interventional X-ray ultrasound

n Interventional Vascular Surgery n Interventional Cardiac Surgery n Electrophysiology n Interventional Cardiology n Interventional Radiology n Interventional Neuroradiology

n Cardiology n Emergency Medicine n General Imaging n Regional Anesthesia n Vascular n Women’s Healthcare n Transducers

Magnetic Resonance Monitoring

n Systems n Clinical Solutions n Options & upgrades

n Patient Monitors n Fetal and Maternal Monitors n Clinical Decision Support n Clinical Information Systems n Surveillance and Networking n Clinical Measurements n Remote Critical Care

Mammography Mobile C-arms

n Analog Mammography n Digital Mammography n Computed Mammography

n C-arm with Flat Detector n C-arms with Image Intensifier



LM Lomisa30

The LOMISA transportation network management system combines proprietary logistics software with quality assurance to offer a for human transportation pro-grams.

LOMISA is the preferred transportation management solution per many health care centers in Florida, uSA. Our expertise enables us to solve complex transporta-tion problems for a wide variety of clients, including government agencies, managed care organizations, hospitals and many of the largest insurance companies. We are experts at coordinating non-emergency medical transportation (NEMT).

We offer specific business lines tailored to government and commercial client solutions. Within these two solution categories, LOMISA has perfected its ability to offer its clients budget stability, accountability, improved efficiency and service, with the virtual elimination of systemic fraud and abuse.

LOMISA implements and manages complex non-emergency transportation programs to help our clients achieve their business objectives.

We have particular expertise in the following areas:

eligibility and Authorization Services

Management of front-end screening removes fraud and abuse, and it reduces the need for back-end bill reconciliation.

n Call screening based on client-provided benefit, eligibility criteria n Screening to determine transport type n Electronic transfer of customer data (HIPAA compliant) n ADA disability testing

Call Center Management

Seamlessly blending communications systems with business-critical information en-hances customer care and responsiveness.

n 24-hour availability, 365 days a year n Automated screening and processing n Intelligent call routing n Internet-enabled communications n Toll-free access n Subscription, reservation and on-demand requests n Database, utilization and client file management n Fail-safe backup systems n Multilingual and hearing-impaired services n Complete real-time and historic performance reports n Comprehensive scheduling, route optimization and dispatch





LM Lomisa 31

Multi-Modal Transportation

Building and managing a local network of transportation companies offers service and vehicle type flexibility with enhanced customer services.

n Local transportation network development and management n Sedan and taxi n Wheelchair van n Critical care transports n Neonatal intensive care n Gurney van n Public transit n Credentialed/Volunteer drivers n Customer reimbursement n Vehicle inspection and fleet management n Vehicle tracking and onboard messaging n Staff background checks, drug testing and training (CPR, OSHA, bloodborne pa-

thogen, Passenger Assistance Training, defensive driving) n Coordination with other social service programs n Customer access assurance

Transportation for Hospitals and Health Systems. Efficiency improves when hospitals outsource non-core services to LOMISA. Today, a robust, well-managed non-emergency transportation infrastructure is needed to assist with healthcare service delivery.

LOMISA provides:

n Cost-effective transportation delivery n Centralized management n Expert record-keeping and accountability n Our first priority is the well-being of each patient.

Lomisa Inc. 3501 Townsend Blvd. # 303Jacksonville, FL 32277Ph: 904-723-3009 PH: 305-202-4751 Fax: [email protected]



Only available in Florida (U.S.A.)


LM Lomisa

EXECuTION& PrOJeCTS



Our great challenge is to industrialize the construction with the objective of making homes and buildings for the more advanced societies.

We have a wide range of functional designs, well studied, by country and re-gion for the execution and delivery of fully equipped of:

n Social housing n Officesn Health centersn Schoolsn Shopping centers


LM Lomisa

EXECuTION& PrOJeCTS


For this, we use innovative materials and techniques that deviate from the traditional concept of construction. Our engineers and architects are working to find ways to improve the process of building homes and buildings in one or more levels.

We used for this, an open building system that facilitates to maintain the creativity of the architects, so we only need to build a clever piece of reinforced con-crete, made to fit each project, equipped with excellent features and specifications. The success of this system lies in three key principles:

n Lower costsn Excellent quality guaranteedn Optimization of deadlines


Concrete moulds guarantee a perfect assembly without adjustments or corrections. The industrialized building is a significant cost saving, by offering a type of building affordable with a superior perfection level than traditional housing. The work is per-formed in a clean and safe environment, free of encumbrances or scattered mate-rials and with the minimal risks of accidents. Therefore the long waiting periods to see the final work are over.

The execution time is significantly reduced, housing up to 75% which is an unquestionable improvement. This is possible due to two main reasons, one, that the main components are produced in the factory in accordance with the advanced ma-nufacturing processes and second the technical procedures used are much more studied. Walls, partitions and floors conducts fitted with pre-installed plumbing and electricity, making the construction process be simple and cleaner.

The ensemble remains secured by fast and safety systems. The buildings remain internally armed with a metallic three-dimensional structure, like a cage, that provides it with great resistance through any external impacts such as floods or earthquakes.

With this system individual house, buildings, 2 or 3 story townhouses and collective housing can be building, a high number of alternatives in the designs, with a great structural quality and adapting the final results according to the budgets.


LM Lomisa34

EXECuTION& PrOJeCTS



LM Lomisa

EXECuTION& PrOJeCTS


LM

LM

LM

LM

LM

LMLM LM LM

LM LM

LM

LM

LM

LM

LM

LM

LM Tax residenceCalle Punta Umbría, 26 28939 ArroyomolinosMadrid (Spain)T +34 916 688 708F +34 917 903 [email protected]

Lomisa Inc. 3501 Townsend Blvd. #303Jacksonville, FL 32277Ph. 904-723-3009PH. 305-202-4751Fax [email protected]

Head office

28050 MadridT +34 917 342 058F +34 917 903 [email protected]

OuR MAIN MARKETS


LM Lomisawww.lomisa.es W

e re

serv

e th

e rig

ht fo

r cha

nges

to a

ll te

chni

cal s

peci

ficat

ions

Documents

We provide knowledge, services and products for any kind