Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
We have various support facilities dimensional control, highlighting many among our three dimensional measuring machine, controlled by advanced metrology software "PC-DMIS."
Z1000 Y2200 X1200 Z500 Y700 X700
Dimensional control that has the drawing as a basis of comparison, and summary report with dimensions out of tolerance.
Completing the verification is issued a report dealing with the comparison between the design and the obtained part.
Once the check is issued a report that makes a comparison between Article 3D graphics and the values obtained in the part.
By measuring the "splines" on real part, defines a three-dimensional mesh as a basis for the construction of surfaces of the article.
Development and production of technical parts, both manufacturing unitary as well as in series, etc…
Rua N.º1, Pavilhão B, PÊRO NETO, Box 278 2430 - 403 Marinha- Grande PORTUGAL GPS: 39,869110-8,936960 N 39º 52´8.80´´,W8º 56´13.06