Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Physical Address 1509 Riverport RoadKingsport, TN 37660
Physical Address 400 Natalie Boulevard
Loudon, TN 37774
Kingsport TN: 423-765-9991 | Loudon TN: 865-458-2333
FOR QUESTIONS OR TO REQUEST A QUOTE, VISIT WWW.PROCESSSUPPLY.COM OR CALL
W E A R E A V A I L A B L E 2 4 / 7
SAFETY SPRAY SHIELDS
FOR CONTAINING AND DETECTING HAZARDOUS LEAKS AND SPRAYSFOR CONTAINING AND DETECTING HAZARDOUS LEAKS AND SPRAYSFOR CONTAINING AND DETECTING HAZARDOUS LEAKS AND SPRAYS
Safety for Personnel, Equipment,
and the Environment
INTRODUCTION
EXPANSION JOINT SHIELDS
Available in same fabrics and styles as Flange Shields. Clear Teflon® is recommended for viewing of bellows. Allows for lateral movement, while maintaining fit and
protection. Available for all styles and types of Rubber, Stainless,
and Teflon® bellowed expansion joints, regardless of manufacturer.
Recommended by most manufacturers of expansion joints.
VALVE SHIELDS
Available in same fabrics and styles as Flange Shields.
Allows for operation of valve handle or hand-wheel.
Bonnet Shields allow for travel and opening and closing of gate or globe valve.
Manufactured to fit all styles and types of valves:
Ball Check Butterfly Gate
Plug Diaphragm Control
Safety Spray Shields are designed to prevent a catastrophe by temporarily containing hazardous
leaks and sprays. Leaks can occur on piping systems conveying chemicals, high temperature fluids, and steam, which can harm workers, nearby equipment, and the environment.
Leaks of flammables, such as fuel or oil, can create fire and explosion hazards. Safety Spray Shields help meet regulatory standards set by agencies such as OSHA, EPA,
MSHA, SOLAS, ABS, and DNV, and are now required by some insurance companies. Constructed of metal and durable fabrics that are chemical, UV, and weather resistant, our
Shields are available in Teflon®, Polypropylene, PVC, Polyethylene, and Stainless Steel. Solid cloth styles contain a pH indicating patch which signals a leak by immediately changing color towards red if acidic or towards green if an alkali. The patch is replaceable which allows reuse of the shield. Our Shields are ready to install quickly and simply by one person with the equipped hook and
loop fasteners and drawcord. We offer Shields for all sizes and ratings, including standard, non-standard, and metric(DN). We lead the industry in providing problem solving solutions by designing and manufacturing
customs for special sizes and applications.
Clear Teflon® center strip allows for complete visual inspection. Sides constructed of Premium Teflon® coated glass cloth. Teflon® coated fiberglass or
Nomex® thread and draw cord. Fire and tear resistant. Teflon® drain nipple optional. Max operating temperature 400°F.
Maximum Teflon® content fabric for extreme service and long life. 3-ply multi-layered construction. Teflon® coated fiberglass or
Nomex® thread and draw cord. Fire and tear resistant. Max operating temperature of 450°F.
Most popular style. Teflon® coated glass cloth. Reinforced, 4-ply construction. Teflon® coated fiberglass or
Nomex® thread and draw cord. Fire resistant. Maximum operating temperature
of 450°F.
Solid woven polypropylene fabric. 3-ply multi-layered construction. Insert in center provides 4th protective layer. Polypropylene thread and drawstring. Maximum operating temperature of 200°F.
Reinforced polyvinyl chloride fabric. 3-ply multi-layered construction. Tough poly thread and draw cord. Standard color is safety orange. Yellow and other colors available upon request. Maximum operating temperature of 170°F.
Transparent, reinforced polyethylene fabric. 3-ply multi-layered construction. Tough poly thread and draw cord. Maximum operating temperature of 170°F.
Clear Teflon® Premium Teflon® Standard Teflon®
Polypropylene
Vinyl
Polyethylene
FLANGE SHIELDS
Stainless Steel
316 stainless steel construction. Layers of stainless netting absorb and dissipate pressurized
spray. No tools required, installs quickly via adjustable quick latch. No sharp edges. Excellent for high temperature and pressure. Recommended for steam, flammables, and fire protection. Max temperature 2000°F, max pressure 3000 psi.
PIPE END COVERS Designed to cover the ends of pipe vent outlets on safety relief valves and rupture discs. Made from durable, weatherproof vinyl and Teflon® fabrics. Keeps out rainwater, snow, birds, and insects. Contains a draw cord for securing and grommet for tying rope to prevent loss. Available for angled and straight cut pipe ends. Available for all pipe diameters.
I & E COVERS Designed to fit instrumentation, electronics, controls, expensive and delicate equipment. Increases life and protects from corro-
sive environments. Clear Styles allow for viewing of positioner and actuator. Custom fit, regardless of length and
size.
SPECIALTY SHIELDS & COVERS
Hose Pipe Flow Indicators Sight Glasses Fittings Pumps
Marine Roll Shields Insulated Blankets Fire Extinguishers Curtains Tarps Customs
HOW TO ORDER
RESISTANT GUIDE for COMMON CHEMICALS
Chemical Maximum Temperature °F
PE V PPL CLEAR PTFE 316 SS
Ammonia 170 170 200 200 450 500+
Ethylene Dichloride n/r n/r 75 75 450 500+
Hydrochloric Acid (to 35% conc.) 140 140 200 400 450 500+
Hydrofluoric Acid (to 85% conc.) 75 75 200 n/r * n/r * 500+
Nitric Acid (to 30% conc.) 150 150 150 300 450 500+
Oleum n/r n/r n/r 75 450 500+
Sodium Hydroxide (to 50% conc.) 170 170 200 300 450 500+
Sulfuric Acid (to 30% conc.) 170 170 200 300 450 500+
Flanges: specify size and rating. Valves: specify size, rating, type, model/manufacturer, and connection-flanged, socket weld, or threaded. Expansions joints: specify size, model/manufacturer,
number of convolutions, or overall length. All others: fax dimensions, or contact factory.
* Not recommended because Shield contains fiberglass.
Other Quality Products: Flange Isolation Gasket Kits Insulated Covers Flange Protectors Pipe Wrap & Tape Nut & Bolt Protectors Penetration Seals
DRAKE SPECIALTIES PO BOX 91327
LAFAYETTE, LA 70509 Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
New, simple and effective, patent-pending design. Lockable, adjustable, quick latch fastener. No tools required, installs in seconds. Allows for complete visibility of bolt ends and nuts. No sharp edges. Minimal space requirements. Stainless steel netting absorbs and dissipates pressurized sprays
by distributing it around the flange circumference. Locking feature allows integration for lockout/tagout proce-
dures and recordkeeping. Optional safety pin available. Constructed of 316 stainless steel. Available for all size and ratings of flanges, including square
and oval shaped flanges. Available in widths of 2” and 2 ¾”. Maximum operating temperature of 2000°F. Suitable for hazardous processes of high temperatures, high
pressures, steam, chemicals, and flammables for fire prevention.
Recognized, well-known industry design. Overlapping, slotted side edges prevent lateral sprays. Spacer rods ensure pressure reduction & fluid distribution
through flow space. Fabricated of 24 gauge, 316 stainless steel. Hose clamp style fastener assures securing. Maximum operating temperature of 2000°F. Recommended for high temperatures, high pressures, steam,
chemicals, and flammables for fire prevention.
METAL SAFETY SPRAY SHIELDS for FLANGES & VALVES
PREVENT HAZARDOUS LEAKS AND SPRAYSPREVENT HAZARDOUS LEAKS AND SPRAYSPREVENT HAZARDOUS LEAKS AND SPRAYS
Safety for Personnel, Equipment,
and the Environment
www.drakespec.com
“Style II” Flange Shield
“Style I” Flange Shield
STYLE I
STYLE II
NON-METAL SAFETY SPRAY SHIELDS
Other Quality Products:
Flange Isolation Gasket Kits Solas Anti-Spray Tape Flange Band Protectors Insulation Blankets Nut & Bolt Protectors Centralizers
DRAKE SPECIALTIES PO BOX 91327
LAFAYETTE, LA 70509 USA Phone 337-886-3161
email: [email protected] www.drakespec.com
Style II ’s wider design & overlapping edges are suitable for valves, fittings, and custom fit applications.
Two hose clamps per Shield ensure complete securing. Style II Valve Shields available for:
Ball Valves Butterfly valves Plug Valves Check Valves Gate Valve Bonnets Globe Valve Bonnets
“Style II” 316SS Valve Shield
“Style II” with optional drain nipple
“Style II” Bonnet Shield
Teflon® Flange & Valve Shields - 4 material styles. Poly Flange & Valve Shields - 5 material styles.
Expansion Joint Shields Pipe & Hose Shields Marine Roll Shields
Custom Shields
Style II Options Optional anti-spray screen liner reduces splashing. Optional gasket liners. Optional drain nipple benefits:
Drain port for visual inspection. Vent port for complete air circulation. Connection point for spill recovery and secondary containment related purposes.
METAL VALVE SPRAY SHIELDS
DRAKE SPECIALTIES
PO BOX 91327 LAFAYETTE, LA 70509
Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
Other Quality Products:
Flange Isolation Gasket Kits Insulated Covers Flange Protectors Pipe Wrap & Tape Nut & Bolt Protectors Penetration Seals
SPECIALTY SHIELDS & COVERS • Hose • Pipe • Flow Indicators • Sight Glasses • Fittings • Couplings
• Marine Roll Shields • Insulated Blankets • Fire Extinguishers • Tarps • Curtains • Customs
HOW TO ORDER
RESISTANT GUIDE for COMMON CHEMICALS
Chemical Maximum Temperature °F
PE V PPL CLEAR PTFE 316 SS
Ammonia 170 170 200 200 450 500+
Ethylene Dichloride n/r n/r 75 75 450 500+
Hydrochloric Acid (to 35% conc.) 140 140 200 400 450 500+
Hydrofluoric Acid (to 85% conc.) 75 75 200 n/r * n/r * 500+
Nitric Acid (to 30% conc.) 150 150 150 300 450 500+
Oleum n/r n/r n/r 75 450 500+
Sodium Hydroxide (to 50% conc.) 170 170 200 300 450 500+
Sulfuric Acid (to 30% conc.) 170 170 200 300 450 500+
• Flanges: specify size and rating. • Valves: specify size, rating, type, model/manufacturer, and connection-flanged, socket weld, or threaded. • Expansions joints: specify size, model/manufacturer,
number of convolutions, or overall length. • All others: fax dimensions, or contact factory.
• Designed to cover the ends of pipe vent outlets on safety relief valves and rupture discs. • Made from durable, weatherproof vinyl and Teflon® fabrics. • Keeps out rainwater, snow, birds, and insects. • Contains a draw cord for securing and grommet for tying rope to prevent loss. • Available for angled and straight cut pipe ends. • Available for all pipe diameters.
PIPE END COVERS I & E COVERS • Designed to fit instrumentation, electronics, controls, expensive and delicate equipment. • Increases life and protects from corrosive environments. • Clear Styles allow for viewing of
positioner and actuator. • Custom fit, regardless of length and
size.
* Not recommended because Shield contains fiberglass.
Product Categories
Safety Spray Shields
Metal Spray Shields
Specialty Shields & Covers
Marine Safety
Flange Isolation Gasket Kits
Flange Band Protectors
Nut and Bolt Protectors
Penetration Seals
Centralizers
Contact Information
Address: PO Box 91327, Lafayette, LA 70509 USA
Phone: 3378863161
Fax: 3378863167
Email: [email protected]
Marine Roll Shields Sometimes called Navy Roll Shields, these Safety Spray Shields on20' to 30' long rolls are attached using stainless wire. Used extensively by the Navy, CoastGuard, and other military craft around the world. Various widths are available.
Teflon Spray Shields Designed to cover flanges, valves, expansion joints, fittings,flexible hoses, pipe joints, and unions to contain and detect leaks and sprays for safety,fire, and environmental concerns. Also commonly called flange protectors, flange guards, orspray guards.
316 Stainless Steel Spray Shields Designed to cover flanges and valves to contain andcontrol leaks and sprays for fire and personnel protection. 316 Stainless Steel constructionwith quicklatch or hose clamp attachment.
Solas Spray Tape Designed to wrap around small diameter tubing, piping, and fittings inengine rooms to contain sprays of flammables. Made of aluminized fiberglass cloth tapewith adhesive backing, available in 35mm and 50mm wide rolls.
Insulated Covers Made from durable, weatherproof, high temperature fabrics, these arecustom designed with 1" thick insulation, and contain velcro, Drings, or draw cord forsecuring. Designed to fit piping, valves, exhausts, etc.
Marine Safety SolutionsDrake Specialties manufactures a complete line of marine safety products used and recommended by HSEprofessionals. With attention to detail in design and manufacturing to address your health, safety, and environmentalconcerns, our products are designed for reliable protection of personnel, equipment, and the environment.
Leaks or sprays of pressurized fluids such as hydraulic fluid, lube oil, or fuel oils, can create fire and explosion hazardsin engine rooms. Sprays of hazardous chemical or fluids can harm workers and our precious water resources.
Key examples of marine applications are military based such as the Navy and Coast Guard. Other marine applicationsinclude offshore work and supply vessels, commercial vessels, passenger ships, cruise ships, and barges.
Many regulatory agencies such as EPA, ABS, Solas, and CFR have standards that require one or more of DrakeSpecialties' marine safety products listed below:
Home | Products | About Us | Literature Request | How to Order | Contact Us | Español
Safety Spray Shields | Customs and Specialty Shields | Flange Isolation Gasket Kits | Flange Protectors | Nut Caps & Bolt Protectors | Centralizers | Penetration Seals
© 2010 2014 Drake Specialties
• Designed to wraparound tubing, hoses, piping, fittings, and valves in marine and offshore applications.
• Prevents fires by containing sprays and leaks of flammables and hot fluids.
• Made of aluminized fiberglass cloth with special adhesives and release liner.
• Required by new Solas and IMO regulations.
• Certified by ABS, DNV, and Bureau Veritas.
• Available in widths of 35mm, 50mm, 140mm, 250mm, & 500mm.
• Rolls are 10 meters long.
DRAKE SPECIALTIES PO BOX 91327
LAFAYETTE, LA 70509 Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
FLANGE ISOLATION KITS
FOR SEALING AND ISOLATION OF FLANGES
ELIMINATES METAL TO METAL CONTACT TO
PROVIDE ELECTRICAL ISOLATION AND CATHODIC PROTECTION
GASKET KIT TYPES
This style kit contains a full- face gasket that has the same outside diameter as the flanges. This style gasket will prevent foreign material from collecting and creating a bridge, thus shorting the cathodic isolation. Type E gaskets are available in phenolic, neoprene-faced Phenolic, and high temperature materials-see page 3.
Type E Type F
This gasket will fit only the raised face surface of the flanges. The out- ide diameter of the gasket is slightly less than the inside diameter of the bolt circle. This gasket can be used on both raised face and full face flanges. It is recommended that the flanges are wrapped with Flange Band Protectors to prevent foreign material from collecting and creating a bridge, thus shorting out the isolation. Type F gaskets are available in same material as Type E.
Type D
Type D gaskets are designed to fit into the ring groove of RTJ (ring type joint) flanges. We also offer BX gaskets. Both are available in grade CE phenolic.
Type O
This gasket has a sealing element on each side and is available in both Type E and Type F styles. The sealing element materials are nitrile, viton, or Teflon. Gasket materials available are phenolic and G-10.
INTRODUCTION
• Drake Specialties� Flange Isolation Gasket Kits are designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection. Flange Isolation Gasket Kits provide both an effective seal and reliable electrical isolation of flanges. By eliminating metal to metal contact, static current is halted to prevent corrosion and aid in the Cathodic Protection of the piping system. • Constructed of high quality materials that have a high dielectric constant and low water absorption, our Flange Isolation Gasket Kits are available in various configurations to meet every possible need. • We offer Flange Isolation Gasket Kits in all sizes, ranging from 1/2� to 144�, in all Ansi and API classes. Custom and special sizes are also available upon request.
SPECIFICATIONS
Gaskets
Material Dielectric Strength
Water Absorption
Compressive Strength
Maximum Temperature
Plain Faced Phenolic 500 vpm 1.5 % 25,000 psi 225°F 107°C
Neoprene Faced Phenolic 500 vpm 1.5 % 25,000 psi 175°F 79°C
G-10 550 vpm .10 % 50,000 psi 285°F 141°C
Special & High Temperature: Available upon request.
Sleeves
Material Dielectric Strength
Water Ab-sorption
Maximum Temperature
Mylar 4000 vpm .8 % 300°F 149°C
Integral Minlon 1200 vpm .22 % 200°F 93°C
Polyethylene 400 vpm .01 % 105°F 41°C
Phenolic 400 vpm 2 % 225°F 107°C
G-10 550 vpm .10 % 285°F 141°C
Nomex 400 vpm n/a 450°F 232°C
Washers
Material Dielectric Strength
Water Absorption
Compressive Strength
Maximum Temperature
Phenolic 400 vpm 1.1 % 25,000 psi 225°F 107°C
G-10 550 vpm .10 % 50,000 psi 285°F 141°C
Special & High Temperature: Available upon request.
HOW TO ORDER
Other Products: Safety Spray Shields
Custom Covers & Blankets Flange Protectors
Nut & Bolt Protectors Penetration Seals Sealing Solutions Pipe Wrap & Tape
DRAKE SPECIALTIES PO BOX 91327
LAFAYETTE, LA 70509 Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
Type F Gasket, Single Washer Set Type E Gasket, Double Washer Set
1. Specify flange size and pressure rating. 2. Specify gasket type: D, E, or F. 3. Specify single washer or double washer set. 4. Specify sleeve material. 5. Consult factory for specials.
PACKAGING
Each Flange Isolation Gasket Kit from Drake Specialties is individually packaged in a durable pizza style box. The iso-lating sleeves and washers are packaged separately in the box to protect them during shipping. Each box is labeled with flange size and pressure rating, type of isolating sleeves, and if double or single washer set.
FLANGE BAND PROTECTORS
• Designed to cover flanges to protect flange faces, stud bolts, and gaskets from corrosion.
• Keeps out moisture, chemicals, saltwater, acid rain, etc.
• Keeps out foreign matter, which is critical on systems that are cathodically protected.
• Available in 316 stainless steel, Kydex plastic, and Clear.
• 316 stainless steel worm gear clamp.
• 316 stainless steel injection fitting
• Gasket liner of closed cell neoprene, maximum operating temperature of 180°F.
• Optional EPDM rubber gasket liner, maximum operating temperature of 270°F.
• Safety relief valve optional, bleeds at 5 psi.
• Available for all size flanges.
• Optional liner of Teflon® or silicone for chemical and high temperature applications.
• Custom engineered designs available per application.
DRAKE SPECIALTIES
PO BOX 91327 LAFAYETTE, LA 70509
Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
DRAKE SPECIALTIES
PO BOX 91327 LAFAYETTE, LA 70509
Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
• Designed to protect hex nuts and stud bolt ends from corrosion, thus allowing easy unbolting.
• Eliminates need of a torch for nut removal.
• Keeps out moisture, chemicals, salt spray, and paint buildup.
• Molded from UV, chemical, and weather resistant polyethylene plastic.
• Standard color is black.
• Simple and easy to install.
• Nearly impossible to knock off.
• Economical and reusable.
• Available for all size studs and bolts.
• Maximum temperature of 212°F, 170°F constant.
• Custom sizes and materials available.
• Fill caps with our corrosion inhibitor grease for added protection.
Drake Nut/Bolt Caps
PENETRATION SEALS
• Standard material is EPDM rubber, suitable for 250°F.
• Standard hardware is plated carbon steel.
• Economical, reusable, and simple to install.
• Available in 12 different sizes to fit nearly every pipe penetration, from 1/2" pipe to 98" pipe.
• Nitrile rubber available for services of solvents, hydrocarbons, oil, gas, and jet fuel, suitable for 210°F.
• Silicone rubber available for high temperature applications up to 400°F.
• Optional stainless steel hardware available.
• Penetration Seals are interlocked rubber links that are designed to provide a leak-proof and insulated seal that fills the annular space of pipe penetrations.
• Penetration Seals fit around piping going through walls, floors, tanks, manholes, vaults, dikes, and pipeline casings to provide a gas and watertight seal.
• Penetration Seals have been tested to withstand a hydrostatic seal up to 20 psig and up to 40 feet of head pressure.
DRAKE SPECIALTIES PO BOX 91327
LAFAYETTE, LA 70509 Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
DRAKE CENTRALIZERS
DRAKE SPECIALTIES PO BOX 91327
LAFAYETTE, LA 70509 Phone 337-886-3161 Fax 337-886-3167 www.drakespec.com
Designed to centralize and space piping or pumps inside of larger diameter piping or casing.
Simple and quickly installed by a single worker.
Heavy duty 2-piece, 14 gauge, T-304 stainless steel construction. Risers are 10 gauge, T-304 stainless steel; runners are glass-filled
polymer 2” wide. Hardware is 304 stainless steel. Standard width is 8”, 12” width optional. Lined with ribbed EPDM for grip and to prevent corrosion and
electrical contact between carrier pipe and casing. Available for all diameter piping and casing id configurations.
Physical Address 1509 Riverport RoadKingsport, TN 37660
Physical Address 400 Natalie Boulevard
Loudon, TN 37774
Kingsport TN: 423-765-9991 | Loudon TN: 865-458-2333
FOR QUESTIONS OR TO REQUEST A QUOTE, VISIT WWW.PROCESSSUPPLY.COM OR CALL
W E A R E A V A I L A B L E 2 4 / 7