WDT V100R005C00SPC100 Propaganda Slides for Indosat

HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Part I Wireless Deployment Tool WDT Promotional Slides(V100R005C00SPC100)

December 2014

Part I Wireless Deployment Tool WDT Promotional SlidesPart II Wireless Deployment Tool WDT Operation Guide Slides

HISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD. Page 2HUAWEI Confidential

2Tool Introduction and Function Introduction

3 Effect Analysis and Presentation

Contents

4 Appendixes and Example Sites

1 Deployment Pain Points


1. Pain Points of Traditional Deployment Modes

Transmission or the OSS is not ready.

PNP is not supported.

The progress is delayed.

Complex USB file making Files are easy to be placed in a wrong path.

Faults are invisible.

High skill requirements using laptop computers. The partner employee exchange is frequent.

The skill transfer costs are high.

An-tenna cross feeder con-nec-tion 18%

An-tenna faults 42%

Transmis-sion

prob-lems 15%

Optical fiber and

mod-ule

18%

GPS problems 2%Others 5%

Problem analysis of second visits in a projectComplex and long acceptance report output Incorrect

information collection, such as errors or missing

Rework

Case:Transmission and remote deployment conditions are not met at the earlier stage of a delivery project. To meet the deadline, 200 sites are installed. After sites go online later, only 50 sites are working properly and the other 150 sites have alarms, such as standing wave alarms, optical alarms related to no TX/RX optical modules, and low or high optical power alarms.Therefore, these 150 sites are handed over to the supervisor and subcontract to go to site multiple times by using laptop computers and professional construction tools. This wastes costs and delays the progress.


2. Introduction to Wireless Deployment Toolkit WDT

Hardware requirements:1. Mainstream Android smartphones are supported:Configuration: Android 2.3+, CPU 1 GHz, 512 MB RAM, and 2 GB

SD card2. Common Wi-Fi APs are supported: Recommended: TP-LINK TL-MR12U

Software requirements:WDT.apk (the size of the software package is 3 MB)

WDT (Wireless Deployment Tool):Wireless deployment tool WDT is a Huawei-developed smart-phone application (WDT.apk) that focuses on deployment and acceptance scenarios. Integrated with expert systems, the WDT is easy to use and provides diverse functions to facilitate site deployment and maintenance.

ALL (USB flash drive, DT mobile phone, camera, GPS, barcode scanner, alarm board, paper, and pen among others) in ONE (smartphone)

Only a network cable, an AP, and a smartphone are required.All mainstream Android mobile phones are supported.All common APs are supported, which reduces costs and facilitates procurement.


WDT functions

Script

Software

One-click site deployment

One-click site deployment:

Allows engineers to automatically log in to a base station, and then load the required software, scripts, and license file in one-click mode. The load process is visible.

It takes 10 to 18 minutes to deploy a base station in one-click mode.

Note: Subcontractors do not need to load any functions. They can use the functions only by clicking the corresponding buttons.


WDT functionsAndroid Terminal

One-click self-check

Rectify faults onsite.

VSWR

PIM

Cross Feeder

CPRI

One-click self-check:

After the installation is completed, engineers can click a specific button to perform GUI-based detection on engineering quality, such as the CPRI optical power, transmit optical power, cell status, clock status, transmission status, voltage standing wave ratio (VSWR), intermodulation, and single cross feeder connection.

Engineers can click a specific button to transmit the detection results back to the OMC for review.

This ensures that engineering quality problems are solved onsite, and frees the product team from frequent site visits.



WDT functions

One-click transmission fault location

Trans-link

Auto Ping

Auto TRACERT

Trans error detect


One-click transmission fault location:

Engineers can click a specific button to locate transmission faults, which is easy.


WDT functions

One-click report generation

Wizard-based photographing and one-click report generation:

Subcontractors can achieve wizard-based photographing based on a customized list, thereby preventing some photographs from being missed. The WDT automatically takes photographs and renames and sorts the photographs.

Site reports or customized acceptance reports are generated in one-click mode.


3. Detailed Functions of Wireless Deployment Toolkit WDT

WDT Functions Effect

1. Software, configuration file, and license loading

1. Operation replay

2. Automatic generation of acceptance reports

1. Transmission link setup process and faults visibility

2. Ping and Tracert

3. Antenna detection (VSWR, intermodulation, and

crossed pair connection)

4. Cell, board, optical power, and GPS check

5. Alarm query

6. Operation log

1. Radio parameters, service verification, and site

navigation

2. Acceptance photo-taking

3. Acquisition of GPS data

4. ESN scanning (sent by SMS)

5. Data uploading (sent by email)

Sit

e A

ccep

tan

ce

Bas

e S

tati

on

C

om

mis

sio

nin

g

Dat

a L

oad

ing

Rep

or

t To

ol

Reduce skill requirements

Reduce device quantities and

costs

Accelerate the project delivery

progress

Locate the cause of a fault and

solve the problem locally

Reduce the time of second visits

to a site significantly

Collect information correctly and

efficiently

Generate reports quickly and

correctly


4. WDT Benefits . Customized Photographing and Automatic Report Generation

1. Customize a list for wizard-based

photographing onsite by using the WDT.

Transmit photographs back through methods

such as email, SMS, or net disk.

Integrated solution based on wireless deployment toolkit WDT and documentation preparation tool SID

SID used for documentation

preparation2. Contents that need to be

entered: Record the contents on reused papers onsite (information

entries are optimized).

Base station

OMC

3. Customize information that is required for automatically obtaining site acceptance

information through the M2000.

5. All collected information is automatically filled in a

customized report.

Photographing list customization

The customization period is less than 30 minutes. Acceptance or survey

documentationThe customization period

is less than one week.

4.Enter other information according to specified rules.

Information is entered quickly.


5. Summary of Benefits Brought by Wireless Deployment Tool WDT

Free the project team from

frequent site visits

Generate acceptance reports

intelligently

Ensure the project progress

Reduce subcontractor skill

requirements

Transmission faults are avoided, software commissioning engineers are no longer required, and the project team does

not need to pay frequent site visits. This improves delivery efficiency, reduces the number of site visits, and ensures

delivery progress.

• Even if transmission is out of position, we dare to

install base stations. We can ensure no rework

after the installation.

• Generate neat deployment reports intelligently based on the photo collection guide, alarm query, and status query functions of smart terminals. This saves a lot of report making time.

• Ensure no site engineering installation faults before leaving sites

• No requirement for the remote OSS

• GUIs simplify the installation and operations.

• No user manual is required. Subcontractors can install base stations and user them immediately after the installation.

Four reasons to reduce costs

Replace multiple site visits by one visit.

Replace manual reports by automatically generated reports.

Replace laptop computers by smart terminals.

Replace high skill requirements by low skill requirements.


Appendix 1 - Required Smartphones and Selecting Policies1. The WDT software can be installed on all mobile phones of Android 2.3 to 4.4 produced by mainstream vendors. In areas where the Android phones are popular among subcontractors, subcontractors' Android phones can be used.

Note:To ensure that the functions are stable, smuggled cell phones and pirated cell phones cannot be used. You are advised to use the Android mobile phones produced by global mainstream vendors, such as: Samsung, HTC, and Huawei (If some Android mobile phones cannot be compatible, please send the phone models and Android versions back to the WDT deployment contact person. Thank you!).

1. The mobile phone functions in the delivery: site deployment and project quality self-check, service test, and reporting photo-taking.

The site deployment and project quality self-check functions basically have no requirements on mobile phone performance. Mobile phones of Android 2.3 to 4.4 can be used. Android mobile phones bought on the Taobao with 200 RMB (exemption from postage) also support the WDT.

2. Service test requirements: If there are service test onsite requirements on the wireless side (Not a drive test for network optimization. Drive test tools for network optimization are checked and prepared by the network optimization side.):

A. Preferred mobile phones support the modes and frequency bands required by the project, and mandatory feature tests, such as the CSFB and VoIP, which need to be checked by the wireless project owners.

B. If lock screen is tested, the PHU and a third-party lock frequency software must be installed on the mobile phone at a time. You are advised to choose preferred phone models that support the software (You need to confirm with the Huawei PHU team or the third-party software personnel).

3. Photo-taking requirements: If customers have high quality requirements on photos, the mobile phone resolution must be no lower than 8 million. In addition, the mobile phone must support the autofocus and SD card functions (mainstream mobile phones in the market basically support the functions).

Summary: If customers have dialing test requirements, mobile phones of specified models that support the dialing test function must be purchased. If there is no dialing test requirements, purchase Android mobile phones with a resolution no lower than 8 million that are easy to purchase at local area.

2. Delivery of smartphones will become the trend in the future. All fields of Huawei are developing mobile phone tools. Considering that mobile phones can be used for a long time, you are advised to purchase smartphones in batches based on the following selection policies:


Appendix 2 - Recommended APs with Self-supplied Power and Convenient for Local Procurement

ID Model Online Purchase Website

1 TP-LINK TL-MR12U

Jingdong Mall: http://www.jd.com

Taobao: Www.taobao.com

Amazon: www.amazon.com

ID Model Online Purchase Website

1 TP-Link WR702N

Jingdong Mall: http://www.jd.com Taobao: www.taobao.com

Amazon: www.amazon.com Ebay: www.ebay.com

eBay: www.eachnet.com Best Buy: www.bestbuy.com

Yahoo: shopping.yahoo.com Wal-Mart: www.walmart.com

2

POWERLINK AP2403 or

POWERLINK PT-AP2403

Amazon: www.amazon.com Ebay: www.ebay.com

eBay: www.eachnet.com Best Buy: www.bestbuy.com

3 B-Link BL-MP01Jingdong Mall: http://www.jd.com Taobao: www.taobao.com

Amazon: www.amazon.com

1. Recommended AP Lists (With self-supplied mobile power, it has no need for external power supply at the site.)

2. Other AP lists (The external power is used and the AP obtains power from the USB port on the control board.)Note: The UMPT board has no USB interface, and APs with external power supply cannot obtain power from the UMPT board.

Configuration Item

Configuration Requirements

Supported standards and protocols

IEEE 802.11 b, 802.11 g, 802.11 n

Work mode AP mode

AP mode settings

The default is AP, and the IP address is automatically configured. It can be manually switched to the AP by pressing the handover key.

RET type Built-in antenna

Transmission efficiency

11 b: 11 Mbit/s, 11 g: 54 Mbit/s, 11 n: 150 Mbit/s

Work voltage/Current

DC 5 V/500 mA

Charging cable USB cable

Port Ethernet port

Built-in battery Greater than 5200 mAh

3. AP Configuration Requirements

Note: Theoretically, all APs in the market support self-supplied power. However, some AP vendors set built-in firewall and password by default. If you find that the WDT cannot log in to the base station or cannot upgrade the software, disable the default settings and password of the AP firewall.

http://www.jd.com/

http://www.taobao.com/

http://www.amazon.com/

http://www.jd.com/




http://www.ebay.com/

http://www.eachnet.com/


http://www.bestbuy.com/

http://www.walmart.com/

http://www.walmart.com/



http://www.ebay.com/



http://www.bestbuy.com/

http://www.jd.com/



HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential

Part II Wireless Deployment Tool WDT Operation Guide Slides(V100R005C00SPC100)

December 2014

Part I Wireless Deployment Tool WDT Promotional SlidesPart II Wireless Deployment Tool WDT Operation Guide Slides

HISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD. Page 15

Step 1. Obtain WDT and install

You can obtain the WDT installation package using either of the following two methods:

1. Log in to http://support.huawei.com and navigate to the following path:

Support > Product Support > Wireless Network > Wireless Professional Service > Radio Access Service >

GENEX > WDT (free application download)

Copy WDT.apk to the root directory of the smartphone and click to install.

2. Scan the following two-dimension code and download the installation package:(Print QR Code on paper)

Click to install after download successfully.

Step 2. Automatically create folders

WDT will create HuaweiSDTData and subfolders automatically.

Function 1: Install and Configure the WDT

QR Code

Folders

http://support.huawei.com/

HISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD. Page 16

Step 3. License applying

1. Online applying(recommended way).Project administrator to authorize the privileges.

a. Project Administrator bulk import phone IMSI number,click "Register" button to apply. b. Install the tool and click on the "Register", the device will automatically be reported to

the information the user ID, the project administrator added.

Note: A project can have one or more interface person, please contact the administrator (Sang Yanqi 00189072, Wei Jie 00190129) to set new administrator privileges, after setting to manage the project and apply for License

Function 1: Install and Configure the WDT

2. Offline applying

a. Obtain Device ID from

b. Send to administrator Wei Jie 00190129, Li Wuyang 00186135

Note: Provide your project information while sending email.

c. Copy license file to smart phone.

d. Import file and start to use WDT.


2. WDT startGUI Phone does not require to pre-connect Wi-Fi, Please click "Deployment" icon and then to select Wi-Fi

signal, then can connect AP and login station.

Click the SDT icon, select the RAT of base stations you want to log in to, and select the site where the configuration file is saved. The navigation page is displayed. According to standard, software version and control board to select the corresponding "Select Mode" option, please refer to the following table.

Base Station Type

Recommended Logging RAT

RAT Selection

Path

GTMU GSM GSM HuaweiBTSInfo / GSM

WMPT UMTS UMTS HuaweiBTSInfo / UMTS

LMPT LTE LTE HuaweiBTSInfo / LTE

UMPT GSM/UMTS/LTE/GU/GL/UL/GUL

BTS3900 HuaweiBTSInfo / BTS3900

BTS3202E/BTS3203E/BTS3902E/BTS3803E

Micro UMTS, Micro LTE

Micro HuaweiBTSInfo / Micro

LAMPSITE Lampsite UMTS,

Lampsite LTE, Lampsite UL

Lampsite HuaweiBTSInfo / Lampsite

Choosing the destination version mode to login


Function 1: One-Click Deployment1. The base station software, scripts and license issued The macro site, micro site, and LampSite are supported. The progress of loading the software, configuration, or license is visible. You can select software RATs of co-MPT base stations.

One-click deploymentVisible progress and status

Automatically read the board and version


1. Base station commissioning - transmission link setup visibility

The visibility of IP transmission deployment process allows you to locate faults quickly. It reduces the time from 20-minute to 1.

Red, yellow, and green lights indicate task results, providing a simple and direct view. You can expand them to view details.

Note: Create site NE icons on the M2000 to ensure that the status of 1. OMCH/OML Information is in green, indicating connected.

Function 2: GUI-based Detection

Automatic detection of the expert system

Comprehensive transmission information and clear fault view

Useful tool of transmission fault locating and demarcation


2. Base station commissioning - Transmission fault check The input-free function automatically reads the next hop IP address of the base station and the IP addresses of the BSC and

M2000. The ping and Tracert tests can be executed multiple times.

You can manually change and type the IP address, and check service IP addresses.


Manual ping and Tracert tests


The WDT allows you to test the VSWR, intermodulation, and antenna cross feeder connection functions. Commands are automatically executed and results are displayed in red, yellow, and green, providing a direct and simple view.

3. Base station commissioning - Antenna checkFunction 2: GUI-based Detection

Automatic testsNo rework during the antenna construction

Note: After the software and configuration data is download, base stations are restarted. Wait for 12 minutes and then enable the antenna check function. Software of RRUs takes effect slowly. It takes 12 minutes for three 8-channel RRUs to take effect.

Meaning of signalgreen： not interferedred： interferedyellow： execution failed


Ensure that no engineering alarms exist before you leave sites to avoid possible future rework.

This function can replace the external alarm detection board.

Implementation Skills:

Considering that the skills of subcontractors are poor in many areas, the following policies can be defined in the delivery procedure: Subcontractors are obligated to transmit site deployment logs back to a mailbox specified by OMC personnel after they complete the self-check. The OMC personnel use the WDT PC assistant to view the logs and verify that no errors occur and no engineering-related alarms are reported, and then notify the subcontractors of leaving the sites.

4. Base station commissioning - Alarm queryThe list in the current page can be refreshed so that the deleting status is confirmed in a timely manner.


Please contact OMC to get further help

HISILICON SEMICONDUCTORHUAWEI TECHNOLOGIES CO., LTD. Page 23HUAWEI ConfidentialIf the optical power meter is used onsite, lead the customer into replacing the optical power meter with the WDT.

Allows you to query various kinds of information.

The GBTS does not support the board, optical power, cell, and GPS check at the local end.

5. Base station commissioning - Board, optical power, cell, and GPS checkFunction 2: GUI-based Detection

Places where problems probably occur are clearly displayed.

Optical powerBoard status

RRU serial number,Can be used as an reference of CPRI crossfeed


Export the base station equipment archives, and check whether the material record

information is consistent with the actual situation.

You can perform dialing tests of simple services by blocking or unblocking a cell.

6. Common - Base station management

Function 2: GUI-based Detection Ensure that the record information is consistent with the actual situation.

By blocking cells to ensure the phone stay at the target cell,In order to do service tests.


Parameters of the IPRT/OMCH/VLANMAP/VLANCLASS are automatically queried and manually modified.

Modification of transmission parameters of non-GSM macro sites and micro sites is supported.

1. CommonFunction 3: Base station management

The parameters offer the optional items, which helps reduce

manual input.


User-defined query commands (LST and DSP) are supported.

Error commands are identified and you know the execution progress and return packet at a glance.

2. Common - User-defined MML query

Function 3: Base station management Error commands are identified at a glance and the execution progress can be stopped at any time.

Format the command,highlight the wrong ones.

Pause at any time

Procedure

1. Edit MML,save file to /HuaweiBTSInfo/MML.2. WDT preparse the command and filter the wrong one.3. Send commands to site and display the results.


3: Base station commissioning - Site deployment logs

Site deployment logs display operation processes and records related to base stations.

All operations related to base stations are traceable.

Function 3: Base station management

Each operation is recorded precisely, allowing you to trace and locate operations easily.

You can manually check WDT logon phone, the path is\HuaweiWDTData\SiteName\LOG\


1: Site acceptance - Data uploading

After site deployment is complete, data is automatically uploaded to the OMC engineer email.

Sender and recipient emails are configurable. The sender email box must be Gmail.

Function 4: Data Uploading

One-click uploading and OMC synchronization locating


Base station commissioning - Operation replay

You can replay deployment data on the mobile phone.

Deployment results are displayed on GUIs,

facilitating later problem locating and communication.

Function 4: Data Replay for Easy Troubleshooting

Location of Replay files on phone


Function 5: Site Acceptance - Site Photo-Taking Fixed entry photo-taking: The mobile phone displays pre-configured entries on the screen. Workers take phones one by one based on these entries.

Random fault photo-taking. Take photos of all faults. Fault photos can be uploaded in real time, facilitating fault locating in time. Photos can be

selected and descriptions can be added to photos.

These entries can be customized. Photos are taken based on these entries. No photo is missing or improperly taken. Photos can be compressed or edited.

Compression will reduce the picture quality of 45%,With 13 million pixel mobile phone for reference,Uncompressed, photo size is 1.2M,Compression, the picture 66k.


Function 5: Site Acceptance - ESN Bar Scanning

Workers scan bar codes based on pre-configured ESN entries. The function supports one-dimension

and two-dimension code scanning. The site name, RAT, and ESN name are automatically added before the ESN and then sent to OMC engineers by SMS or email. For example,

Site78_GSM_BBU:210305394710CB001076. The BBU ESN can be used in ESN binding during the M2000 PNP deployment in real time. This avoids the inefficiency and errors of manual ESN reading.

Avoid ESN copying and reading errors.Real-time uploading accelerates the PNP deployment.


Enable the function manually to automatically obtain GPS information.

GPS information is automatically saved in deployment reports.

GPS information is sent in real time, helping real-time position management.

Function 5: Site Acceptance - Acquisition of GPS dataAutomatic GPS picture savingCorrect site positionsCorrect time information

Add GPS info on photo


Function 5: Site Acceptance - Simple Service Verification Allows you to view brief information about radio parameters,such as radio parameters of GSM,UMTS,LTE,and Wi-Fi. You need to log in to the base station to obtain PCI parameters of the LTE. The short message sending and receiving, MMS message sending, calling test, the HTTP test, and the FTP uplink and

downlink tests are supported.


Set preferred network mode

Block other cells

Log in to the site to obtain

PCI (Optional)

Set parameters of SMS,calling

test,FTP,HTTP Result table

Main Activities of Simple Service Verification

Function 5: Site Acceptance - Simple Service Verification


The short message sending and receiving, MMS message sending, calling test, the HTTP test, and the FTP uplink and downlink tests are supported.

HTTP testSMS,MMS message sendingAnd receiving

Calling testFTPuplink and downlink

Result

Function 5: Site Acceptance - Simple Service Verification


Downloads the configuration file, software package, and license.

Supports retransmission of data, such as deployment logs, photos, and ESN.

Supports online test of version upgrade and online downloading.

Supports the license authentication.

Download software package and so on,Re-download them when changes on server

Upload logs to server

Show License validity date, seven days before the expiry prompts the user to postpone the operation

Online upgrading

Functions 6: Common - Data service


http://support-trial.huawei.com/onlinetools/sdtrp/project.action

It provides the APP uniform access, site deployment data transmission, site deployment result send-back, terminal APP automatic updating, and terminal APP license

management for the site deployment through smartphones.

Functions 6: Common - SDTRP

ID Type Function Description Special Requirements

1

Site deployment

management

Management of site deployment files

Provide the function to upload and delete site deployment files (such as site configuration files, software packages, and license files).

None

2Terminal configuration

Provide the function to configure the terminal APP parameters (such as the AP connection, base station settings, photographing items, ESN items, SWR thresholds, RET antenna, GSM self-defined alarms, undercurrent/overcurrent alarm settings, business validation, Email and SMS, and staff information) and transmit the data to the terminals based on actual project conditions.

None

Obtaining of the site deployment results

Provide the function to query site deployment result files (such as the ESNs, GPS, site deployment logs, fault photos, acceptance photos) and download the site deployment result files through terminals.

The terminal must be able to access the network.

3

4Assignment of the site deployment terminals

Provide the function to assign the sites to designated terminals for site deployment (for example, assign multiple sites in a batch to one terminal for sites deployment).

5

Terminal management

Terminal online registration

Provide the function that the terminals register to the SDTRP server and then be added after being audited by the user.


Manual adding of site deployment terminals

Provide the function to manually add the terminals one by one based on the terminal IMEIs or import multiple terminals in a batch using an Excel file.

6

7Extension of terminal validity term

Provide the function to manually extend the terminal validity term and to extend the terminal validity term after auditing its application for extending its validity term on the SDTRP server.


8Exporting of offline license

Provide the function to export the offline license file that is controlled by the terminal validity term. None

9Terminal APP management

Provide the function to upload the terminal APP installation packages and update the APP version. None





Createa project

Site list

Filter function

View site logs

Createa site

SDTRP - Site deployment management

Provide the function to create projects, create sites, upload and delete site deployment files

(such as site configuration files, software packages, and license files).

Provide the function to query site deployment result files, or to filter by sitename , status and time.


upload files

Starting Device number

Activated scenario

Undercurrent/Overcurrent threshold

Save as

Edit WDTConfig.txt

Visual editor, simple and flexible Set WDTConfig.txt on the WEB window of the SDTRP server.

Provide the function to set the starting device number, reduce configuration difficulty.

SDTRP - Site deployment management


SDTRP - Terminal management

Add terminal

Supported bulk upload

Online license applying

Update WDT version

Administrator online add and audit and transfer terminal, provide the function to bulk upload terminal list.

Upload the WDT installation package, prompts terminal to download and update.


Function 7: Windows Background Tool - Operation Replay The mobile phone uploads deployment data in real time. The server displays deployment GUIs

synchronously, facilitating fault locating and communication.

Copies the deployment data folder HuaweiSDTData in the root directory to the PC. Replays deployment data on the PC and stimulates mobile phone GUIs to reproduce previous onsite GUIs.

Synchronous display of site faultsWhole replay of deployment processEveryone is a GTAC expert


Function 8: Windows Background Tool - Site Acceptance Report Generation The tool reads data generated during the deployment, such as deployment logs, site photos, ESNs, GPS

information, and service test data, automatically generates professional, neat, systemic, and comprehensive

reports, and submits them to telecom operators.

The 18-page report is automatically generated in 3 minutes.Site information is correct, complete, and neat.

96.174_DBS3900 WCDMA.xlsx


Thank you!

Documents

WDT V100R005C00SPC100 Propaganda Slides for Indosat