WD40PURX-64GVNY0 Test Report - Advantechwfcache.advantech.com/.../documents/96hd4tb-st-wd5ka_Testreport.pdf · WD40PURX-64GVNY0 Test Report ... Date Revision Description Creator 2014/04/28

Drawings and specifications herein are property of Advantech and shall not be reproduced or copied or used without prior written permission.

Page 1 of 27

WD40PURX-64GVNY0

Test Report

Initiated by River Lin Approved by Jackie Wang


Page 2 of 27

Revision History：

Date Revision Description Creator

2014/04/28 V1.0 The First version released.


Page 3 of 27

Test Results Definition：

Criteria Definition

PASS Test result pass and function work perfectly.

Fail Test fail or can not meet the spec requirement.

Limitation There are no plans to fix this function.

N/A Spec not support or driver not ready.

No Test No test tool or device or FW not ready, please write reason to the “Remark”.


Page 4 of 27

Test Results Summary：

Num. Test Item Result Remark

Chapter 1 Function Test

1.01 HDD Function Test PASS

1.02 SATA IDE Mode Test PASS

1.03 SATA AHCI Mode Test PASS

1.04 SATA RAID Mode Test PASS

Chapter 2 Software Compatibility Test

2.01 OS and Driver Install Test PASS

Chapter 3 Hardware Compatibility Test

3.01 CPU Board Compatibility Test PASS

Chapter 3 System Reliability Test

4.01 Power On/Off Test PASS

4.02 Warm Boot Stress Test PASS

4.03 ACPI Cycling Burn-in Test PASS

4.04 Full System, I/O Integrated Stress Test PASS


Page 5 of 27

Table of Contents

Revision History： .................................................................................................................................................. 2

Test Results Definition： ........................................................................................................................................ 3

Test Results Summary： ........................................................................................................................................ 4

Table of Contents .................................................................................................................................................... 5

Product Information： ........................................................................................................................................... 6

Platform Configuration: ......................................................................................................................................... 7

Test Programs： ................................................................................................................................................... 10

Test Equipments： ............................................................................................................................................... 11

Chapter 1：Function Test .................................................................................................................................... 13

1.01 HDD Function Test................................................................................................................................ 13

1.02 SATA IDE Mode Function Test ............................................................................................................ 14

1.03 SATA AHCI Mode Function Test ......................................................................................................... 15

1.04 SATA RAID Mode Function Test ......................................................................................................... 17

Chapter 2：Software Compatibility Test ............................................................................................................ 18

2.01 OS and Driver Install Test .................................................................................................................... 18

Chapter 3：Hardware Compatibility Test .......................................................................................................... 20

3.01 CPU Board Compatibility Test ............................................................................................................. 20

Chapter 4：System Reliability Test ..................................................................................................................... 21

4.01 Power On/Off Test................................................................................................................................. 21

4.02 Warm Boot Stress Test .......................................................................................................................... 22

4.03 ACPI Cycling Burn-in Test ................................................................................................................... 22

4.04 Full System, I/O Integrated Stress Test ................................................................................................ 23

Chapter 5：System Performance Test ................................................................................................................. 25

5.01 HDD Performance Test ......................................................................................................................... 25


Page 6 of 27

Product Information：

Item. Description.

Advantech Part Number 96HD4TB-ST-WD5KA

Manufacturer Western Digital

Model Number WD40PURX-64GVNY0

From Factory 3.5”

Interface SATAIII

Capacity 4TB

Cache Capacity 64MB

Rotation Speed(RPM) intellipower

Host Transfer Rate 6GB

Bytes per Physical Sector 512(Hst)/4096(Physical)

Number of Disks 4

Power On Hour(POH) 8760

Annualized Failure Rate (AFR)

/MTBF <0.9%/1000000 hours

Voltage Tolerance +5.0V ± 5% and +12.0V ± 10%.

Operating Temperature 0°C to 65°C

Firmware 80.00A80

Country of Origin Thailand

Dimension (W x H x D) 26.1mm x 147.0mm x101.6mm

RoHS Status (Yes/No) Yes


Page 7 of 27

Platform Configuration:

PCE-7128

Item. Description.

M/B Name PCE-7128

PCB Version. A101-3

BIOS Version. 7128X006

Backplane Model. PCE-5B06-03

Backplane Verson. A101-2

CPU Model/Info Intel® Xeon® CPU E3-1275 v3 @3.5GHz

Memory Type/Info/Size DDR3 1600 4G*2 Apacer 78.B1GCE.AF1

PCH Chipset Intel C226 PCH

Graphic Controller Intel HD Graphic GT2

LAN1 Controller Intel® I217

LAN2 Controller Intel® I210

PCE-5127

Item. Description.

M/B Name PCE-5127

PCB Version. A101-3


Backplane Model. PCE-5B06-03

Backplane Verson. A101-2

CPU Model/Info Intel® i7-3770 3.4GHz


PCH Chipset Intel QM77 PCH

Graphic Controller Intel HD Graphic

LAN1 Controller Intel® 82579LM

LAN2 Controller Intel® 82583V

AIMB-581

Item. Description.

M/B Name AIMB-581


Page 8 of 27

PCB Version. A101-3

BIOS Version. A581X057

CPU Model/Info Intel® i7-2600 3.4GHz


PCH Chipset Intel QM67 PCH

Graphic Controller Intel HD Graphic

Audio Codec ALC892


LAN2 Controller Intel® 82583V

MIO-5271

Item. Description.

Project Name. MI0-5271

PCB Version. A101-3


EC Version I2865X0101

CPU Model/Info Intel® Celenron® 2980U@ 1.60GHz

Memory Type/Info/Size DDR3L-1600 4GB Apacer 78.B2GCR.AF10C

PCH Chipset Lynx Point-LP PCH QM87

Graphic Controller GT3 Graphics, Generation 7.5 graphics core architecture

Audio Codec ALC888S

LAN1 Controller Intel i218

LAN2 Controller Intal i210

MIO-5290

Item. Description.

Project Name. MIO-5290

PCB Version. A101-2

BIOS Version. 5290X015.

EC Code Version. I1809X0100

CPU Model/Info Intel i3-3217UE @ 1.70GHz

Memory Type/Info DDR3 1333 2GB Apacer 78.A2GC9.4200C


Page 9 of 27

Total Memory Size 8GB

PCH Chipset QM77

Graphic Controller VGA Function was supported intel PCH

Audio Codec ALC892


LAN2Controller Intel® 82583V


Page 10 of 27

Test Programs：

Test Program Version

HD Tach V3.0.4.0

HD Tune Pro V5.5

CrystalDiskMake V3.0.3

ATTO Disk V2.46

PassMark Burn-In Test Pro V7.1 build 1017

PassMark Rebooter V1.3 build 1004

PassMark Sleeper V2.3 build 1009

Power on/off V3.3


Page 11 of 27

Test Equipments：

Model Description

Power on/off test equipment (ATX/AT)


Page 12 of 27


Page 13 of 27

Chapter 1：Function Test

1.01 HDD Function Test

1.01.01.01 Test Purpose：

The purpose of SATA test is to analyze and validate the functional、performance capabilities、quality

and stability.

1.01.01.02 Test Standard：

Please refer to the Project Hardware and BIOS specification.

1.01.01.03 Test Tool：

1. SATA cable

2. SATA HDD

3. SATA DVD-ROM

1.01.01.04 Test Criteria：

1. The BIOS must detect SATA devices information.

2. The SATA function can install OS and work well on OS without hang, restart, or blue screen or

any problems.

3. The Device Management can not have any exclamation point and question mark.

4. Mark sure pass w/program without any error ocurrs.

1.01.01.05 Test Procedure：

1. Insert SATA HDD and DVD-ROM into the DUT

2. The BIOS detect SATA port HD correct information.

3. Install OS and all drivers.

4. SATA HDD can be copy/del/read/write file.

5. Install the PassMark BurnIn Pro program, and setting :

(a) Select tests to perform and their duty cycle: Select Disk(s) and Optical Drive(s)/ 100%

Loading/Auto Stop After : 30Minutes.

(b) Set test preferences: Select “Disk”-> Select Test this drive/ set File size: 15(% of disk), other

setting value keep defaults Preference.

(c) Then Press “Start selected tests” for test.

6. After finished testing, the test result will show on screen.

7. Change other port, and repeat 1~6.

1.01.01.06 Test Data：


Page 14 of 27

Test Item Description Result Remark

Post information POST should show the correct model name PASS

BIOS information BIOS detect correct information PASS

Device Manager Device Management can not have any exclamation

point and question mark, and detect correct information PASS

Install OS &driver Can install OS and driver PASS

SATA Port Mark should all SATA port can detect and reboot

shutdown PASS

BurnIn Running passmark 30mins PASS

1.02 SATA IDE Mode Function Test


Page 15 of 27


The purpose of this test is to ensure the functional of the SATA IDE Mode.


Please refer to the Project Hardware and BIOS specification

1.03.01.03 Test Tools：

1. SATA HDD

2. SATA DVD-ROM

3. PassMark Burn In test Pro


1. The BIOS Setting IDE mode for DUT.

2. DUT must install OS and all drivers forIDE mode without any problems or error occurs.


1. Plug SATA HDD and DVD-ROM into DUT.

2. Setting IDE mode of SATA Mode on BIOS.

3. To install OS and drivers.

4. Install PassMark BurnIn Pro program and run 30min. After finished testing, the result will show

on screen.

5. Enter S1 mode, the system should be resume from S1 mode. This can work properly, and repeat

3times.


3times.


3times.

8. Enter Start-> shutdown on OS, then press power button turn on and boot into OS of DUT. This can

work properly, and repeat 3times.

9. Enter Start-> restart on OS, then boot into OS of DUT. This can work properly, and repeat 3times.

1.03.01.06 Test Data：


SATA IDE Mode

Win7 Ultimate SP1_X86 Installation Test. PASS

Win8.1 Pro_X86 Installation Test. PASS

ACPI S4 Mode PASS

OS shut dowm PASS

Warm Boot Test. PASS

1.03 SATA AHCI Mode Function Test


Page 16 of 27


The purpose of this test is to ensure the functional of the SATA AHCI Mode.




4. SATA HDD

5. SATA DVD-ROM


7. Intel F6 Install Floppy Driver or AHCI driver on USB flash disk.


3. The BIOS Setting AHCI mode for DUT.

4. DUT must install OS and all drivers for AHCI mode without any problems or error occurs.


10. Plug SATA HDD and DVD-ROM into DUT.

11. Setting AHCI mode of SATA Mode on BIOS.

12. To install OS and drivers, during install process, need to upload AHCI driver from Floppy or USB

flash disk.

13. Install PassMark BurnIn Pro program and run 30min. After finished testing, the result will show

on screen.


3times.


3times.


3times.




19. Setting Enabled Hot Plug SATA Port on BIOS.

20. The DUT SATA should be Hot Plug and work properly, and repeat 3times.

1.03.01.12 Test Data：


SATA AHCI Mode

Win7 Ultimate SP1_X64 Installation Test. PASS

Win8.1 Pro_X64 Installation Test. PASS

ACPI S4 Mode PASS


Page 17 of 27

OS shut dowm PASS

Warm Boot Test. PASS

Hot Plug PASS

1.04 SATA RAID Mode Function Test


The purpose of this test is to ensure the functional of the SATA RAID Mode.




1. SATA HDD

2. SATA DVD-ROM


4. Intel F6 Install Floppy Driver or RAID driver on USB flash disk.


1. The BIOS Setting RAID mode for DUT on BIOS.

2. DUT must install OS and all drivers for SATA mode without any problems or error occurs.


1. Setting RAID mode of SATA Mode on BIOS.

2. During boot, Press <Ctrl+I> to enter Intel Rapid Storage Technology - Option ROM and setting

RAID 0 Mode.

3. To install OS and driver, during install process need to upload RAID driver from Floppy or USB

flash disk should be has no hang, blue screen, or any problems.

4. To install PassMark Burn In test Pro and rn 30min. After finished testing, the result will show on

screen.




1.04.01.06 Test Data：


SATA RAID Mode

RAID0 PASS

RAID1 PASS

Rebuild PASS


Page 18 of 27

Chapter 2：Software Compatibility Test 2.01 OS and Driver Install Test


The purpose of this test is to ensure the OS compatibility of the DUT.




1. Microsoft OS installation DVD depends on X86/X64.


1. The OS X86/X64 installation process must complete without any error occurs.

2. The Server OS X86/X64 installation process must complete without any error occurs.

3. Device Management can not have any exclamation point and question mark.


1. Plug OS DVD or Server OS into DVD-ROM, and start install follow installation process.

2. After finish OS install, install all drivers for the DUT.

3. Make sure drivers of the DUT can install, and device management can not have any unknown

device.

2.01.01.06 Test Data：

Test Item Description Result Remake

Win7 Ultimate SP1 x86

OS Installation – English. PASS

Driver Installation. PASS

Device Management Check. PASS

Win7 Ultimate SP1 x64




Win8.1 Pro x86




Win8.1 Pro x64




Win Server_2008 R2 OS Installation – English. PASS


Page 19 of 27

Test Item Description Result Remake

SP1 Enterprise_x64 Driver Installation. PASS


Win Server 2012

Standard_x64





Page 20 of 27

Chapter 3：Hardware Compatibility Test

3.01 CPU Board Compatibility Test


The purpose of this test is to validate and ensure the CPU Board compatibility of the DUT.


Please refer to the Project Hardware specification and BIOS specification.


1. Different Chipsets of CPU Board


1. With a different CPU board connected. The DUT must PASS without any error occurs.

2. BIOS must detect current information

3. Device Management can not have any exclamation point and question mark.


1. Connect to CPU board and power on.

2. The system should be detected HDD, then install OS and drivers for this.

3. Confirm the all kinds of CPU board should work properly.

3.01.01.06 Test Data：


CPU board BIOS version PCB Version OS install

MIO-5271 5271X018 A101-2 Win7/Win8.1/2012 PASS

MIO-5290 5290X015 A101-2 Win7/Win8.1 PASS

AIMB-581 A581X057 A101-3 Win7/Win8.1 PASS

PCE-5127 5127X030 A101-3 Win7/Win8.1/ Server2008R2 PASS

PCE-7128 7128X006 A101-3 Win7/Win8.1/Server2008R2/2012 PASS


Page 21 of 27

Chapter 4：System Reliability Test

4.01 Power On/Off Test


The purpose of this test is to examine and validate the stability of the Power On/Off and AT mode

under Widows OS.


Please refer to the Project Hardware specification and BIOS specification


1. Power on/off test equipment.

2. Power on/off Program


1. The test msut PASS the Power on / off circling test >= 100 times, booting rate＝100%

2. The DUT must maintain a stable condition without any system crash, hang, blue screen or any

problems.

3. The system must have no any error w/ Program.


1. Connect Power on/off test equipment to DUT for Power on/off test

2. Make sure PSON1 or HW Jumper set as ATX Mode.

3. Make sure BIOS item: After AC power Failure MUST set as "Always Off".

4. Install and execute Power on/off Program, and setting Timer ：hr/min/sec on DUT.

5. Setup testing time, and change to zero of run number on Power on/off test equipment.

6. Start power on/off test and pass over100 times.

7. Make sure PSON1 or HW Jumper set as AT Mode

8. Repeat 4~5 and start power on/off test for AT mode and pass over 100 times.

4.01.01.06 Test Data：


Power On/Off test

(ATX mode)

1. 1. BIOS item: After AC power Failure set as "Always

Off"

2. 2. H/W jumper set as ATX mode

3. 3. Test at room temperature for 1000 duration cycles

3. Booting rate =100%

PASS

Power On/Off test

(AT mode)

1. BIOS item: After AC Power Failure set as "Always

Off".

2. H/W jumper set as AT mode

3. Test at room temperature for 1000 duration cycles


PASS


Page 22 of 27

4.02 Warm Boot Stress Test


The purpose of this test is to analyze and validate the functional、performance capabilities、quality and

stability of DUT warm boot capability.




1. PassMark Rebooter


1. The test msut PASS the Reboot circling test >= 100 times, booting rate＝100%


problems.

3. The system must have no any error w/ Program.


1. Install PassMark Rebooter program.

2. Executing program, and setting

(a) Maxiimum reboots 100 cycles.

(b) Delay Time Out setting before each reboot: 20~25 sec.

(c) Enabled Auto load Rebooter at startup.

3. Then start test Cycle.

4.02.01.06 Test Data：


Windows 7 Ultimate SP1

X64

1.Run PassMark Rebooter V1.3 Build1004

2. Must PASS for 100 duration cycles.

3.Time Out Before reboot:10-25secs


PASS

4.03 ACPI Cycling Burn-in Test


The purpose of this test is to examine and validate the quality and stability of the DUT ACPI capability.




1. PassMark Sleeper V2.3 Build1009



Page 23 of 27

1. The ACPI function test msut PASS run 100 times


other problems.


1. Install PassMark Sleeper on the DUT.

2. Setup ACPI support mode.

3. Press Configuration-> Cycles Settings-> Cycle forever, then press ok.

4. Press Sleeper Now and start test 100 times.

4.03.01.06 Test Data：


Windows 7 Ultimate

SP1 X64

1. Run PassMark Sleeper V2.3 build 1009.

2. Select "all supported states". (S4)

3. Run for 100 times. The DUT MUST maintain a stable

condition after the test has been completed.

PASS

4.04 Full System, I/O Integrated Stress Test


The purpose of this test is to examine and validate the quality and stability all IO of the DUT.




1. PassMark BurnIn Pro


1. The Full loading test msut PASS run over 12hours

2. The DUT must maintain a stable condition without any system crash, hang, blue screen, restart or

any other problems.

3. The system must have no any error w/ PassMark BurnIn Pro Program.


1. Insert tool into all of IO port on DUT.

2. Install PassMark BurnIn Pro program.

3. Executing BurnIn test, and setting :

(a) Select tests toperform and their duty cycle: Setp Auto Stop “720” Minutes, select need to test

items

(b) Set test preferences: setup need to setting items.

(c) All setting finish, press “Start selected tests” for test.

4. The DUT run program over 12hours.

4.04.01.06 Test Data：


Page 24 of 27

I/O Integrated Stress Test: Windows 7 Ultimate SP1 X64


CPU 100% Loading PASS

RAM 100% Loading PASS

VIDEO 100% Loading PASS

2D Graphics 100% Loading PASS

3D Graphics 100% Loading PASS

SATA1 SATA HDD WD 40PURX -64GVNY0File system:

NTFS PASS


Page 25 of 27

Chapter 5：System Performance Test

5.01 HDD Performance Test


The purpose of this test is to ensure the HDD performance of the DUT.


Please refer to the Project Hardware specification and BIOS specification.


1. HD Tach

2. HD Tune Pro

3. CrystalDiskMark

4. AS SSD Benchmark

5. ATTO Disk Benchmark


1. Executing the BenchmarkTest test item of HD Tach

2. Executing the Benchmark\Read Test of HD Tune Pro.

3. Executing the BenchmarkTest default item of CrystalDiskMark

4. Executing the BenchmarkTest default item of AS AUTO Disk Benchmark


1. Install HD Tach program.

2. Executing program, then setting “Select Storage Device” and Long bench”

(a) Select Storage Device

(b) Long bench(32mb zones)

(c) Press Run Test.

1. Install and execute HD Tach, setting “Select Storage Device” and Long bench”:

(a) Select Storage Device

(b) Long bench(32mb zones)

2. Install and execute HD Tune Pro, setting “need to test HDD” and press “Start” for test.

3. Install and execute CrystalDiskMark, setting “need to test HDD” and press “All” start test.

4. Install and execute ATTO Disk Benchmark, setting Drive “need to test HDD” and press “Start”

for test.

5. Record all of test results.

5.01.01.06 Test Data：

HDD Performance (OS:)

Test Item HD Tach 3.0.4.0 MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark


Page 26 of 27


Test Item HD Tach 3.0.4.0 MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark

HDD

Long bench(32mb zones)-Random access

/(smaller is better)

17.3 17.8 17.3 16.9 17.1

Long bench(32mb zones)-CPU utilization /

(%,+/-2%) (smaller is better)

6 6 0 2 8

Long bench(32mb

zones)-Average read 143.3 143.8 143.8 138.7 138.4

Long bench(32mb zones)-Burst Speed

368.8 290.8 332.7 335.3 421


Test Item HD Tune Pro 5.5 MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark

HDD

Burst Speed / (MB/s) 323.7 274.5 284.6 299.3 300.5

Transfer Rate - Min. (MB/s) 1.7 66.8 67.8 64.9 3.8

Transfer Rate - Max. (MB/s) 156.8 158.1 156.8 152.6 152.6

Transfer Rate - Average. (MB/s)

113 116.6 116.8 112.1 108.6

Access Time (ms) 22.7 23.3 22.2 21.1 22.4

CPU Utilization (%) 7.1 3.9 1.5 2.2 7.2


Test Item Software Comment

/ (unit) MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark

HDD

Crystal

DiskM

ark

Read

(MB/s)

Seq 154 125.5 147.7 138.4 151.0

512K 39.69 30.87 28.6 31.15 40.00

4K 0.5 0.370 0.291 0.342 0.479

4K QD32 1.389 1.202 1.241 1.051 1.357

Write

(MB/s)

Seq 149.6 125.5 144.1 137.0 147.7

512K 80.92 73.33 77.89 74.03 89.60

4K 1.245 1.274 1.287 1.259 1.510

4K QD32 1.222 1.346 1.293 1.264 1.491


Page 27 of 27


Test Item Software MIO-5271 MIO-5290 AIMB-581 PCE-5127 PCE-7128 Remark

HDD

ATTO Disk Benchmark

Read (MB/s) 159.106 127.875 146.485 151.872 160.496

Write (MB/s) 156.410 125.427 143.933 150.594 156.659

Documents

WD40PURX-64GVNY0 Test Report - Advantechwfcache.advantech.com/.../documents/96hd4tb-st-wd5ka_Testreport.pdf · WD40PURX-64GVNY0 Test Report ... Date Revision Description Creator 2014/04/28