WD011

3.11

Basic Description:

These sealed LED indicator units are designed for harsh environment warning light usage. The electronics are internally

encapsulated in an epoxy resin to protect against moisture and vibration damage. The whole unit is placed in a sealed

enclosure to further prevent moisture ingress. All electronics are protected from voltage spikes and are designed to

work of a large range of voltages as would be expected on long cable lengths.

Electrical specifications:

Input voltage range 140 - 750Vac continuous

Current consumption 21mA @ 600VAC

Spike protection >800VAC for shorter than 2 Second

Light output (total) > 60 000 mcd @ 600VAC

Wavelength 624nm typical

Life expectancy > 150 000 Hours

SPECIFICATIONS

SPECIFICATIONS

USES

ACCESSORIES

LED SAFETY LIGHT

HEX110 - 600A LED INDICATOR

F-22

Section 3

VISUAL WARNING DEVICESLED INDICATORS

· Bicycles· Child’s school bag· Camping· Skiing· Car emergency· Mountain climbing· Baby stroller, etc

· Arm strap· Bracket for bike

· 6 function: steady light, 2 rates of flashing and 3 kinds of running light· Super bright LED up to 800mtr/2,500 ft· Use ‘AA’ (1.5V) battery x 2at least 200 hours· Weight (without battery) 32 grams· Water resistant

WD012

· Cutout: Æ 106mm· · · · · Voltages: 12, 24, 32, 110, 220VAC/DC

Used mainly on mines for robots, refuge bays... Polycarbonate lens is vandal proof & the 76 LED's give a large bright light.Approximate lifespan of 15 YearsColours: Red, green, yellow, orange, blue or bi-colour (Red & Green).

LE110E-U

LE11OE-M

LE110E-G

LE110E-Y

LE110E-K

LE110E-N

LE110E-D

LENSES

..... STD DIFFUSED RED

..... SUPER DIFFUSED RED

..... WATER-CLEAR GREEN

..... STD DIFFUSED YELLOW

..... SUPER YELLOW

..... TRUE ORANGE

..... BI-COLOUR (RED & GREEN)

RED, GREEN, AMBER OR CLEAR.

LED ROBOTS

LE110....

LE110D-U

LE110D-M

LE110D-G

LE110D-Y

LE110D-K

LE110D-N

LE110D-D

..... STD DIFFUSED RED

..... SUPER DIFFUSED RED

..... WATER-CLEAR GREEN

..... STD DIFFUSED YELLOW

..... SUPER YELLOW

..... TRUE ORANGE

..... BI-COLOUR (RED & GREEN)

Section 3

VISUAL WARNING DEVICESROBOT INDICATORS

ENCAPSULATED STANDARD

3.12114 X 114 X 1.5 PCB

3.13

WD013

COLOURS AND BRIGHTNESS AVAILABLE:

STD DIFFUSED RED ·

SUPER DIFFUSED RED ·

SUPER CLEAR RED ·

EXTRA SUPER CLEAR RED ·

GREEN ·

TRUE ORANGE · TRUE ORANGE

2 CONDUIT ENTRY BACK BOX (GREY)

· STD DIFFUSED RED

· SUPER DIFFUSED RED

· SUPER CLEAR RED

· EXTRA SUPER CLEAR RED

· GREEN

· TRUE GREEN

· SUPER CLEAR YELLOW · SUPER CLEAR YELLOW

· STD CLEAR BLUE

·

PLROBFD-U PLROB D U

PLROBFD-M PLROB D M

PLROBFC-M PLROB C M

PLROBFEC-M PLROBE C M

PLROBFC-G PLROB C G

PLROB C T

PLROBFC-K PLROB C K

PLROB C B

PLROBFD-N PLROB D N

PLB-BOX2

This range of encapsulated warning lights are constructed in a clear impact resistant poly-carbonate lens and is available in various brightnesses and colours. The printed circuit board holding the LED's and associated circuitry are encapsulated into the poly-carbonate lens with an epoxy resin. This makes the product moisture proof and highly reliable. These warning lights are available in the steady on state or with built in flashers. The termination for these units is available on the rear of the lens via two M3 brass screws, thus termination with ring lugs is ideal. The units can be supplied including a two entry back box or can be ordered separately.

105

15

15

7

f87

77

ENCAPSULATED WARNING LIGHTS

Voltages currently available:

FLASHING: STEADY ON:12V AC/DC N Y24V AC/DC Y Y48V AC/DC Y Y110V AC/DC Y Y220V AC Y Y500V DC Y Y SPECIAL ORDER ONLY

· FOR UNDERGROUND & INDOOR USE· (1 Lens)· (2 Lenses)· WITH OR WITHOUT MIDI-PEAKS· COLOURS: Red, green or bi-colour.· VOLTAGES: 24V, 32V, 110V, 220V (AC/DC)

ROB-1LROB-2L

LED ROBOT BOX

Section 3

VISUAL WARNING DEVICESROBOT INDICATORS

80 20

322

230

CLEARPOLYCARBONATELENS

RED POLYCARBONATE LENS(Shown out of position)

PC BOARD WITH76 RED SUPERBRIGHTLEDs

LE110as seen in page 3.12

PC BOARDWITH 76 GREENSUPERBRIGHT LEDs (similar to diagram)

20

FLASHING: STEADY ON:

This is a non stock item made to order by “MIMIC CRAFTS”.The enclosure dimensions may vary depending on what is available.

Please contact us with your robot indication requirements.We are very flexible & have manufactured many different typesof LED robot boxes.