Upload
morris-watson
View
212
Download
0
Embed Size (px)
DESCRIPTION
The most common connection is the “spur connection” however; it is possible that your building plans may call for another type of connection due to the details of your location and project. Read on to find out more about each connection
Citation preview
Water Main & Sewer ContractorsServing Manhattan For Over 95 Years
718-841-9569
All Types of NYC House Sewer Connections
All Types of NYC House Sewer Connections
There are several types of sewer connections when connecting a new house to the city sewer in NYC.:
• Manhole connection• Spur Connection• Curb Connection• Fold in sewer connection• Drill in connection• Riser Connection
718-841-9569
The most common connection is the “spur connection”
however; it is possible that your building plans may call for another type of connection due to the details of your location and project.
Read on to find out more about each connection
718-841-9569
Manhole Connection
This is the least common sewer connection.
It is usually required for a larger house sewer or due to the layout of the house and city sewer.
EX: if the city sewer stops short and did not extend in front of the house, the city may require the connection at the DEP manhole
Harriswatermainandsewers.com 718-841-9569
Spur Connection
This is the most common type of sewer connection for a house in NYC.
This type of connection is most cost effective as it requires less time and labor to connect than most other types of connections
The spur is shaped very similar to a Y
Harriswatermainandsewers.com 718-841-9569
Curb Connection
This is most commonly found when a new city sewer is installed in the roadway.
A curb connection requires minimal work in the roadway, if any at all.
A curb connection makes a house sewer installation or repair less labor intensive and less costly.
Harriswatermainandsewers.com 718-841-9569
Fold In Sewer Connection
Is needed if the city sewer does not have an existing spur and the size of the city sewer is smaller than currently used.
The process includes removing several sections of the city sewer and folding in new sections of pipe including a “Y” as mentioned above.
Harriswatermainandsewers.com 718-841-9569
Drill In Connection
This is used when a new connection is required into the city sewer and there is no pre-existing connection to be used.
Completed with a core drill machine which is used to carefully drill a hole in the city sewer after the sewer is encased in concrete.
Harriswatermainandsewers.com 718-841-9569
Riser ConnectionThis is a pipe that sits perpendicular on the city sewer and is used as a connection for a house sewer to the city sewer.Likely to be used when the city sewer is deeper than 13’ below ground level however; this is not case 100% of the time. Most commonly used when there is a substantial difference in elevation from the house trap where the sewer exits the house, to the city sewer leaving much greater pitch then allowed as per DEP plumbing code.Would also be used if there were underground conditions such as ground water or large amounts of rock which would make the house sewer connection more timely, costly and challenging to install.Harriswatermainandsewers.com
718-841-9569
Check us out on google+ !
Harriswatermainandsewers.com 718-841-9569
PROUDLY REPRESENTING OUR A+ RATING!Harriswatermainandsewers.com 718-841-9569