Water Catalog.pdf

Clamp, Coupling and Restraint Products CSG 03/10

Applicationand Selection Guide

for Water & Industrial

325 Bronze Service SaddleWith Stainless Steel Strap

418 Bolted Tee CouplingWith Threaded Outlet

680 Tapping Sleeve With Line Stop Outlet

244 Full CircleRedi-Clamp

327 Bronze Service Saddle With Drop-In Bolt

226 Full Circle Repair Clamp

265 Full Circle ClampAll Stainless Steel

Super Range Tapped

Tapping Sleeve With Mechanical Joint Outlet

111/120 Cam-Lock Joint Restraint

For applications involving HDPE Pipe, refer to Smith-Blair’s “Products for High Density Polyethylene Pipe” brochure.

Product Type & Brochure Number Application Type of Pipe For Pipe Sizes Working PressureCam-Lock Joint Restraint

(CC-100)Restraining pipe ends

on MJ fittings Ductile Iron 3" thru 48" 3"-16" 350 PSI18"-48"..250 PSI

Cam-Lock Joint Restraint (CC-100)

Restraining pipe ends on MJ fittings IPS O.D. PVC 3" thru 12"

Rated at the pressure rating of the PVC pipe

it is used on, up to 250 PSI.

Cam-Lock Joint Restraint (CC-100)

Restraining pipe endson MJ fittings D.I. O.D. PVC 4" thru 36"


it is used on, up to 250 PSI. 30”: 150 PSI. 36” : 125 PSI.

Bell-Lock Joint Restraint(CC-100)

Restraining pipe bells,hydrants, valves

and fittings

PVCDuctile Iron† 4” thru 24”



Bell-Lock Joint Restraint(CC-100)

Restraining pipe bells,hydrants, valves

and fittings

PVCDuctile Iron† 4” thru 24”



Pipe-Lock Joint RestraintCoupling (CC-100)

Connecting plain end D.I.to plain end D.I. - Straight. Ductile Iron 3” thru 48”

3”-16” : 350 PSI18”-48” : 250 PSI


Connecting plain end PVCto plain end PVC -

Straight. PVC 3” thru 36”

3”-24” : Rated at the pressure rating of the PVC pipeit is used on, up to 250 PSI. 30”

: 150 PSI. 36” : 125 PSI.


Connecting plain end D.I.to plain end PVC -

Transition. PVC X D.I. 3”-36” (PVC)3”-48” (D.I.)

3”-24” : Rated at the pressure rating of the PVC pipeit is used on, up to 250 PSI. 30”

: 150 PSI. 36” : 125 PSI.Pipe-Lock Joint Restraint

Coupling (CC-100)Connecting plain end D.I.

to plain end D.I. -Reducing. D.I. X D.I. 3” thru 48”

Rating based on larger of the 2OD’s: 3”-16” : 350 PSI

18”-48” : 250 PSI



Reducing. PVC X PVC 3” thru 36”

(Rating based on larger of the 2OD’s). 3”-24 ”: Rated at pres-

sure rating of PVC pipe onwhich it’s installed, up to 250PSI. 30” : 150 PSI. 36” : 125

PSI.


Connecting plain end PVCto plain end D.I. -

Reducing. PVC X D.I.3”-36” (PVC)3”-48” (D.I.)

4”-24” : Rated at the pressure rating of the largerPVC pipe it is used on, up to250 PSI. 30” : 150 PSI. 36” :

125 PSI.Pipe-Lock Joint Restraint

Coupling (CC-100)Weldment only - Straight

and Reducing. PVC & D.I. 3” thru 48” N/AFlange-Lock

Flange Coupling Adapter(CC-100)

Connecting & RestrainingFlanged to plain end pipe Ductile Iron 3” thru 48”* 150 PSI

Other ratings available.

Flange-LockFlange Coupling Adapter

(CC-100)

Connecting & RestrainingFlanged to plain end pipe PVC 3” thru 36”* 150 PSI


Rod and Harness Restraining steel pipe joints Steel 2" and larger Based on application

AWWA M-11 StyleHarness Assembly

(CC-411)

Restraining steel pipe joints Steel 2" and larger Based on application

Anchor Studs(CC-411)

Restrainingcouplings and flanged cou-

pling adapters

Steel orDuctile Most sizes Based on application

EZW Restraint Coupling(CC-EZW)

Restraining rigid pipe toPE & PVC pipe

SteelSome DuctileIron to PE &

PVC pipe

IPS: 1 1/4” - 12”IPS to DI: 2”-8”

Steel 300 PSIPE/PVC 200 PSIDuctile Iron 150 PSI

2

Restraining Pipe

111

120

115

165

120

EZW*Other sleeve lengths available.

911*

920*

†See CC-100 brochure, page 8 for Ductile Iron pressure ratings.

471

472

473

474

475

476

477

3

Product Type & Brochure Number Application Type of Pipe For Pipe Sizes Working Pressure

Full Circle Repair Clamp Low Pressure (CC-200)

Complete breaks,splits, holes in pipe*

Steel, cast iron, asbestoscement, PVC¹, other 2" thru 14" 50 PSI*

Full Circle Repair Clamp (CC-200)


Steel, cast iron, asbestoscement, PVC¹, other 2" thru 14" Up to 300 PSI*

Full Circle Repair Clampsuper range (CC-200)



Full Circle Repair Clamp (CC-200)


Steel, cast iron, asbestoscement, PVC¹, other 14” and larger Up to 150 PSI*

Collar-Leak Clamp(CC-200)

Leaking plastic solventweld belled end pipe

joints

PVC¹, Class 160 PVCsolvent weld bells 2" thru 12" 150 PSI*

Full Circle Repair Clamp Tapping (CC-200)

Leaks at service outlet


Full Circle Repair Clamp Super Range, Tapped

(CC-200)

Leaks at service outlet


Full Circle Redi-Clamp (CC-240)

Pin hole leaks and punctures PVC, copper, steel 1/2" thru 2" Up to 150 PSI*

Redi-Clamp(CC-240)

Pin hole leaks andpunctures; splits in

pipePVC, copper, steel 1/2" thru 12" Up to 250 PSI*

Pipe Repair Clamp(CC-240)

Pin hole leaks andpunctures; splits

in pipePVC, copper, steel 10” and larger Up to 150 PSI*

Full Circle Redi-Clamp castStainless Steel Lug

(CC-240)

Pin hole leaks and punctures PVC, copper, steel 1/2” thru 2” Up to 150 PSI*

Redi-ClampCast Stainless Lug

(CC-240)

Pin hole leaks andpunctures; splits

in pipePVC, copper, steel 1/2 thru 2" Up to 250 PSI*

Full Circle Repair Clamp Cast Stainless Steel Lug

(CC-200)

Corrosiveenvironments


Full Circle Repair Clamp Super Range CastStainless Steel Lug

(CC-200)

Corrosiveenvironments


Full Circle Repair Clampall stainless steel

(CC-200)



Full Circle Repair ClampSuper Range All Stainless

Steel (CC-200)



Full Circle Repair ClampAll Stainless Steel

(CC-200)


Steel, cast iron, asbestoscement, PVC¹, other 12" and larger Up to 150 PSI*

Repairing Pipe

221

226

229

227

228

238

239

244

247

245

248

246

256

257

261

262

263

See footnotes on page 4

Note: If repairing full breaks or joining pipe, the gap between the pipe ends should be a maximum of 1/16” for pipe OD’s less than 4”, 1/4" for pipeOD’s 4” up to 10”, and 1/2" for pipe OD’s 10” and greater in order to comply with the product’s NSF 61 Listing.

4

Product Type & Brochure Number Application Type of Pipe For Pipe Sizes Working PressureFull Circle Repair Clamp

All Stainless Steel, Tapped(CC-200)

Leaks at serviceoutlet

Steel, cast iron,asbestos cement,

PVC¹, other3" thru 8" Up to 150 PSI*

Full Circle Repair ClampAll Stainless Steel, SuperRange, Tapped (CC-200)




Full Circle Repair ClampCarbon Steel

(CC-200)High pressure


PVC¹, other4" and Larger

4.50”-14.25 “300 PSI*

15.30”-25.80”200 PSI*

Full Circle Repair ClampStainless Steel

(CC-200)High pressure


PVC¹, other4" and Larger

4.50”-14.25 “300 PSI*

15.30”-25.80”200 PSI*

Full Circle Collar Leak ClampAll Stainless Steel

(CC-200)

Leaking plastic sol-vent weld belledend pipe joints

PVC¹--PVCsolvent weld bells 2" thru 12" 150 PSI*

Bell Joint Leak Clamp (CC-274) Leaking bell joints

Cast iron, rubberring and caulk

joint2" thru 36" 150 PSI

Repair Service Saddle (CC-300)


Cast iron andasbestos cement 4" thru 12" Up to 300 PSI*

Steel Coupling (CC-411)

Replace split orexcessively

damaged pipeAll types 1/2" and larger 150 PSI+

according to design

Bolted Tee Coupling with threaded outlet

(CC-411)


damaged pipeSteel, PVC¹ 2" thru 16" 150 PSI+

according to design

Cast Coupling(CC-441)


damaged pipe


PVC¹, other2" thru 16" 250 PSI

Cast Coupling12" Long Sleeves

7" Long Sleeves (CC-441)


damaged pipe


PVC¹, other4" thru 16"4" thru 8"

250 PSI

Compression Coupling (CC-525)


damaged pipe

PVC¹, copper,steel 1/2" thru 2" 150 PSI**

Cast FlangedCoupling Adapter

(CC-900)

Replace crackedpipe or spool

flangesAll types 3" thru 12" Up to 175 PSI*

Steel Flanged Coupling Adapter

(CC-900)

Replace crackedpipe or spool

flangesAll types 3" and larger 150 PSI +

according to design

* The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer). For a particu-lar installation, the allowable working pressure will be determined by the size of pipe, type of pipe, type of clamp, type and extent of damage,service conditions, environmental conditions, and installation workmanship.** Higher pressure possible depending on application. Refer to appropriate product catalog for further details.1 Wall Thickness Rating must be provided before ordering for proper selection and proper application.Suitable anchorage must be provided when pipe movement may occur.Standard gaskets are Nitrile (Buna N).Refer to appropriate product catalog for further details.

264

265

267

268

269

274

331

Repairing Pipe

411

418

441

442

525

912

913


Steel Coupling(CC-411)

Joining plain-end pipe ofsame outside diameters All Types 1/2" and larger 150 PSI +

according to design

EZW Restraint Coupling(CC-EZW)

Restraining rigid pipe to PE& PVC pipe

Steel Some ductile iron to PE

& PVC pipe

IPS: 1 1/4”- 12”IPS to DI: 2”-8”

Steel 300 PSIPE/PVC¹ 200 PSIDuctile Iron 150 PSI

Steel Transition Coupling (CC-411)

Joining pipe of different outside diameters

PVC¹, steel, concretesteel cylinder, large pipe 2" and larger 150 PSI +

according to design

Steel Reducing Coupling (CC-411)


Steel, cast iron, asbestoscement, PVC¹, other 1/2" and larger 150 PSI

Steel Reducing Coupling (CC-411)

Joining pipe insulating one from the

otherSteel, cast iron 2" and larger 150 PSI

Bolted Tee CouplingWith Threaded Outlet

(CC-411)

Joining plain-end pipe ofsame outside diameters Steel, PVC¹ 3/4" thru 2" 150 PSI+

according to design

Cast Coupling (CC-441) Joining plain-end pipe ofsame outside diameters

Steel, cast iron, asbestoscement, PVC¹, other 2” thru 16” 250 PSI

Cast Coupling12” Long Sleeves

7” Long Sleeves (CC-441)

Joining plain-end pipe ofsame outside diameters


Quantum Coupling(CC-460)



Quantum Couplinglong sleeve (CC-460)


Steel, cast iron, asbestoscement, PVC¹, other 4" thru 12" 250 PSI


Connecting plain end D.I. to plain end D.I. - Straight. Ductile Iron 3” thru 48”

3”-16” : 350 PSI18”-48” : 250 PSI


Connecting plain end PVCto plain end PVC - Straight. PVC 3” thru 36”

See page 2 for pres-sure ratings.


Connecting plain end D.I. toplain end PVC - Transition. PVC X D.I. 3”-36” (PVC)

3”-48” (D.I.)

See page 2 for pres-sure ratings..


Connecting plain end D.I. toplain end D.I. - Reducing. D.I. X D.I. 3” thru 48”




Reducing. PVC X PVC 3” thru 36”See page 2 for pres-

sure ratings.


Connecting plain end PVCto plain end D.I. - Reducing. PVC X D.I.

3”-36” (PVC)3”-48” (D.I.)


Compression Coupling(CC-525)

Joining plain-end pipe ofsame outside diameters PVC¹, copper, steel 1/2” thru 2” 150 PSI

Cast Reducing Coupling (CC-441)


Steel, cast iron, asbestoscement, PVC¹, other 2" thru 8" 250 PSI

5

Joining Pipe

411

418

441

442

461

462

525

413

416

415

R441

See footnotes on page 6

EZW

471

472

473

474

475

476

6


Single End Expansion Joint(CC-611)

Absorbing concentratedpipe movement

Steel, cast iron 3" and larger 150 PSI + according to design

Double End Expansion Joint(CC-611)

Absorbing concentratedpipe movement Steel, cast iron 3" and larger 150 PSI +

according to design

Cast Flanged CouplingAdapter (CC-900)

Joining plain-end pipe toflanged valves and fittings

Steel, cast iron,asbestos cement 3" thru 12" Up to 175 PSI**

Steel Flanged CouplingAdapter (CC-900)


Steel, cast iron,large pipe 3” and larger 150 PSI +

according to design

Reducing Flanged Coupling Adapter (CC-900)


Reducing sizes ofall types of pipe 3" and larger 150 PSI +

according to design

Flange-Lock Flange CouplingAdapter (CC-100)

Connecting & RestrainingFlanged to plain end pipe Ductile Iron 14" thru 24" 150 PSI

Flange-Lock Flange CouplingAdapter (CC-100)

Connecting & RestrainingFlanged to plain end pipe PVC 14" thru 24" 150 PSI

Meter Coupling(CC-900) Joining plain-end pipe to

oval flanged water meters

- and -


Steel, cast iron 3" thru 12" 175 PSI

Insulating Cast FlangedCoupling Adapter (CC-900)

Steel, cast iron,large pipe 3" and larger 150 PSI +

according to design

Insulating Steel FlangedCoupling Adapter (CC-900)

Steel, ductile iron,cast iron 2" and larger 150 PSI +

according to design

Dismantling JointNon-restraint Joint

(CC-900)

Valve, pump, meter andother flanged fitting instal-

lations


according to design

Dismantling Joint Heavy DutyRestraint Joint (CC-900)


lations


according to design

Dismantling Joint Restraint Joint

(CC-900)


lations


according to design

Joining Pipe

Rigid stiffener must be used on PE/PVC pipe.** The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer). For a particular installa-tion, the allowable working pressure will be determined by the size of pipe, type of pipe, type of clamp, type and extent of damage, service conditions,environmental conditions, and installation workmanship.1Wall Thickness Rating must be provided before ordering for proper selection and proper application.Suitable anchorage must be provided when pipe movement may occur.Standard gaskets are Nitrile (Buna N).Refer to appropriate product catalog for further details.

926

932

933

971

972

975

911*

920*

*Other sizes and sleeve lengths available.


Steel End Cap Seal Only(CC-411) Capping pipe ends Cast Iron, PVC,

Steel, AC 2" and larger Up to250 PSI

Cast Line Cap Seal Only(CC-441) Capping pipe ends Cast Iron, PVC,

Steel, AC 2" and larger Up to250 PSI

EZB Seal and RestraintCapping pipe ends and

restraining cap to pipe. Nothrust blocks required.

Cast Iron, Steel,IPS PVC, IPS PE

IPS1" thru 12"

Cast Iron 2" thru 8"

Up to300 PSI

Capping Pipe

481

482

EZB

914

913

912

611

612

Certain types of pipe may require special preparation prior to installation of these products. Please contact Smith-Blair engineers concerning any appli-cation questions.

7


Full Circle Repair Clamp Tapping (CC-200)

Outlet sizes 3/4" thru 2"



Full Circle Repair Clamp Super Range, Tapped

(CC-200)




Full Circle Repair ClampAll Stainless Steel, Tapped

(CC-200)




Full Circle Repair ClampAll Stainless Steel, Super Tange,

Tapped (CC-200)




Service SaddleSingle Strap, Ductile Iron (CC-300)


Steel, cast iron,asbestos cement 1" thru 12" Up to 200 PSI

Service Saddle Double Strap, Ductile Iron (CC-300)


Steel, cast iron,asbestos cement 1 1/4" thru 24" Up to 300 PSI

Service Saddle Single Strap, Flexi-Coat Epoxy, Iron With

Wide Stainless Steel Strap (CC-300)



PVC¹, other1" thru 14" Up to 200 PSI

Service Saddle Double Strap, Flexi-Coat Epoxy,Stainless Steel Straps (CC-300)



PVC¹, other1 1/4" thru 24" Up to 300 PSI

Bronze Service Saddle Stainless Steel Strap

(CC-300)

Outlet sizes3/4" thru 2"

PVC¹, cast iron,steel 4" thru 12" 150 PSI

Bronze Service SaddleWith Drop In Bolt (CC-300)

Outlet sizes1/2" thru 1"

PVC¹, cast iron,steel 2" and 12" 150 PSI

Repair Service Saddle(CC-300)

Outlet sizes 5/8”thru 4”

Cast iron,asbestos cement 4” thru 12” Up to 300 PSI

Service SaddleDuctile Iron Body, Flexi-Coat Epoxy, With Wide Stainless Steel

Straps (CC-300)

Outlet sizes3" and 4" IPS

PVC¹, cast iron,steel 6" thru 12" 150 PSI

Service Saddle Double Strap ForConcrete Cylinder Pipe (CC-300)


Concrete SteelCylinder 6" thru 36" 150 PSI

Service SaddleTriple Strap (CC-300)


Steel, CI, PVC,asbestos cement,

other18" thru 40" 150 PSI

Service SaddleAll Stainless Steel, Single Bolt (CC-

300)

Outlet sizes 1/2" thru 2" PVC¹ 4" thru 12" 150 PSI

Tapping Pipe

Rigid stiffener must be used on PE/PVC pipe. * The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer). For a particular installa-tion, the allowable working pressure will be determined by the size of pipe, type of pipe, type of clamp, type and extent of damage, service conditions,environmental conditions, and installation workmanship.** For service in corrosive environments.1 Wall Thickness Rating must be provided before ordering for proper selection and proper application.Suitable anchorage must be provided when pipe movement may occur.Standard gaskets are Nitrile (Buna N).Refer to appropriate product catalog for further details.

311

313

315**

317**

371**

362

366

357

325**

265

331

239

264

327**

238

8

Distributed By:Smith-Blair, Inc.P. O. Box 5337

Texarkana, Texas 75505Tel: 800-643-9705 870-773-5127Fax: 800-648-6792 870-773-5212

www.smith-blair.com

SWP/5000/0310

Product Type & Brochure Number Application Type of Pipe For Pipe Sizes Working Pressure**

Service Saddleall stainless steel, double

bolt (CC-300)

Outlet sizes 1/2” thru 2” PVC¹ 4" thru 12" 150 PSI

Bolted Tee Coupling with threaded outlet

(CC-411)

Outlet sizes3/4" thru 2" Steel, PVC¹ 3/4" thru 2" 150 PSI

Tapping Sleeve Optional stainless steel

for corrosive environments(CC-620)

4" and larger: reduc-ing and size-on-size

flanged outlets. Available with 3/4”-6”

threaded outlets.


PVC¹, other

4" and largerreducing

and size-on-size

150 PSI**depending on flange

Tapping SleeveCarbon Steel

Mechanical Joint (CC-620)

Reducing size-on-size flanged

outlets 4" and up


PVC¹, other

4" and largerreducing and size-on-size

150 PSI**depending on flange

Tapping Sleeve for concrete steel pipe

(CC-620)

Reducingflanged outlets

Concrete steelcylinder

12" and largerreducing sizes

only

150 PSI**depending on flange and pipe diameter

Tapping Sleevestainless steel, epoxy coatedcarbon steel flange(CC-620)

Reducingsize-on-size

flanged outlets


PVC¹, other4" thru 24"

Up to 200 PSI dependingon flange and pipe

diameter see footnote*

Tapping Sleeveall stainless steel

(CC-620)

Outlet sizes4"-12"



Up to 200 PSI dependingon flange and pipe

diameter see footnote*

Tapping Sleevestainless steel, epoxy coated

carbon steel flange with drop in Bolts (CC-620)

Reducingsize-on-size

flanged outlets



Up to 150 PSI depending on flange and pipe diameter*

Tapping Sleeve all stainless steel

with drop in bolts (CC-620)

Outlet sizes4"-12"



Up to 150 PSIdepending on flange and pipe diameter*

MJ Outlet available on any style tapping sleeve

(CC-620)

Taps utilizing standard MJ valve

For details, seetype and size

of tapping sleeve


of tapping sleeve

For details, see type and size of tapping

sleeve*

Line Stop Outlet availableon any style tapping sleeve

(CC-620)

Line stopping and pluging


of tapping sleeve

4" thru 12"Other sizes avail-

able

For details, see type and size of tapping

sleeve*

Tapping Pipe

* The allowable working pressure of a Tapping Sleeve decreases as pipe diameter increases (regardless of manufacturer). For a particular installa-tion, the allowable working pressure will be determined by the size of pipe, type of pipe and type of service conditions, environmental conditions, andinstallation workmanship.** Higher pressure possible depending on application. Refer to appropriate product catalog for further details.*** For service in corrosive environments.1 Wall Thickness Rating must be provided before ordering for proper selection and proper application.Suitable anchorage must be provided when pipe movement may occur.Standard gaskets are Nitrile (Buna N).Refer to appropriate product catalog for further details.

623

625

662

663

664

665

MJ

680

622

418

372***

Clamp, Coupling and Restraint Products CC-100 03/11

Joint Restraints

120 Cam-LockTM

471 Pipe-Lock

165 Bell-Lock

Cam-LockTM 111 120Bell-Lock 115 165Pipe-Lock 471 472 473

474 475 476477

Flange-Lock 911 920 923

911 Flange-Lock

Product Type & Page Number Application Type of Pipe For Pipe Sizes Working Pressure

Cam-LockTM JointRestraint Page 5

Restraining pipe ends on MJ fittings

Ductile Iron

Steel

3" thru 48"

3” thru 12”

3"-16" 350 PSI18"-48"..250 PSI3”-12” 250 PSI

Cam-LockTM Joint Restraintw/Multi-Seal Gasket

Page 6


IPS or D.I.O.D.PVC

4" thru 12"Rated at the

pressure rating of the PVC pipe it isused on, up to 250 PSI.

Cam-LockTM JointRestraintPage 7


IPS O.D.PVC 3" thru 12"

Rated at the pressure rating of the PVC pipe it is

used on, up to 250 PSI.

Cam-LockTM Joint Restraint Page 7


D.I. O.D.PVC

4" thru 24"30” DR 25 15036” DR 25 125

4”-24” : Rated at the pressure rating of the PVC pipe it isused on, up to 250 PSI. 30” : 150

PSI. 36” : 125 PSI.

Bell-Lock Joint RestraintPages 8-9

Restraining pipe bells,hydrants, valves and fittings

PVCDuctile Iron

4” thru 16” (D.I.)4” thru 24” (PVC) See Page 8.



PVCDuctile Iron


Pipe-Lock Joint RestraintCouplingPage 11

Connecting plain end D.I. toplain end D.I. - Straight.

Ductile Iron 3” thru 48” (D.I.) 3”-16” : 350 PSI18”-48” : 250 PSI


Connecting plain end PVC toplain end PVC - Straight.

PVC 3” thru 36” (PVC)4”-24” : Rated at the

pressure rating of the PVC pipe it isused on, up to 250 PSI. 30” : 150

PSI. 36” : 125 PSI.


Connecting plain end D.I. toplain end PVC - Transition.

PVC X D.I. 3” thru 36” (PVC)3” thru 48” (D.I.)


PSI. 36” : 125 PSI.

Pipe-Lock Joint RestraintCoupling Page 14

Connecting plain end D.I. toplain end D.I. - Reducing.

D.I. X D.I. 3” thru 48” (D.I.)Rating based on larger of the 2

OD’s: 3”-16” : 350 PSI18”-48” : 250 PSI


Connecting plain end PVC toplain end PVC - Reducing.

PVC X PVC 3” thru 36” (PVC)(Rating based on larger of the 2 OD’s).

3”-24 ”: Rated at pressure rating ofPVC pipe on which it’s installed, up to250 PSI. 30” : 150 PSI. 36” : 125 PSI

Pipe-Lock Joint RestraintCouplingPages 14

Connecting plain end PVC toplain end D.I. - Reducing.

PVC X D.I. 3” thru 36” (PVC)3” thru 48” (D.I.)

4”-24” : Rated at the pressure rating of the larger PVC

pipe it is used on, up to 250 PSI. 30”: 150 PSI. 36” : 125 PSI.

Pipe-Lock Joint RestraintCoupling Pages 14

Weldment only -Straight andReducing.

PVC & D.I. 3” thru 48”N/A


Pages 17

Connecting & RestrainingFlanged to plain end pipe. Ductile Iron 3” thru 48”* 150 PSI


Pages 17-18

Connecting & RestrainingFlanged to plain end pipe. PVC 3” thru 36”* 3”-30” : 150 PSI

36” : 125 PSI


Pages 18

Weldment only -Straight andReducing. PVC & D.I. 3” thru 48”* N/A

Restraining Pipe Selection Guide and Index

111

120

115

120

2

*Other sizes and sleeve lengths available.

911

165

920

471

472

473

474

475

476

477

120

923

On-line Joint Restraint Calculator

3

Smith-Blair’s on-line Joint Restraint Calculator isdesigned to help engineers, distributors and others deter-mine restraint length values and which Cam-Locks toselect.

The calculator allows the creation of projects that con-

tain one or more restraint calculations for any number oflocations. When the calculator is first started, a new projectand a new site are automatically created. Settings can thenbe added for different site locations by utilizing the easy-to-use wizard.

www.sbrestraint.com

Joint Restraint Calculator

Features include: Starting a new project at any time. Determining product selection by part number. Opening and loading a previously saved project file. Saving the current project to a file on your computer. Adding any number of new sites to the current project. Displaying a list of all sites created for the current project. Switching between sites or deleting sites with one easy click. You have the option to enter both a project name and notes and a site name and notes. Printing a report showing all of the site settings and calculations for the current project.

-You will have the option to include the derived and calculated variables with the report. Settings chosen for the current site are shown on the screen at all times. You may jump to any setting by clicking

on the link.

62 ft. = Length of pipeline to be restrained in front of the dead-end

62 ft.

Restraint OnlySmith-Blair Cam-Lock Part Number - 120-09050001-000

Restraint with MJ Gasket & T-BoltsSmith-Blair Cam-Lock Part Number - 120-09050000-000

Restraint with IPS Gasket & T-BoltsSmith-Blair Cam-Lock Part Number - 120-09050000-001

Pipe PVCSoil GMSafety 2.0Pressure 250Fitting End CapDepth 8Pipe O.D. 8Results

Selections

Start Over

Navigation

Calculated Restraint Length Value(s)

New Project

New Site

Open

List

Save

Print

Help

Cam-LockTM

111 120 Joint Restraints

The Next Generation of Joint Restraint TechnologySmith-Blair® Cam-Lock™ joint restraint products

provide a fast and economical means of restrainingmechanical joint water and wastewater fittings. Innovativedesign, extensive testing, and state-of-the-artmanufacturing, combine to produce the Cam-Lock™ withunequaled performance characteristics.

Utilizing Single Tooth Technology and Cam-ActionDesign, the Cam-Lock™ provides controlled positive pipeengagement, resulting in exceptional restraint capabilities.

The Cam-LockTM’s ductile iron construction providessuperior corrosion resistance and strength. Its wedges,actuating bolts and breakaway nuts are coated to helpprevent corrosion.

The Cam-Lock™ body has a heavy impact andcorrosion resistant Smith-Blair® fusion bonded Flexi-Coat®epoxy coating, which meets application methods AWWAC550, C213 and C219.

The Cam-Lock™ is available with a kit, that includes T-bolts, nuts and a choice of MJ gaskets in sizes 3-inch to48-inch. The 30”-48” are only available with kits.

Cam-Lock™ Features Fewer wedges mean less installation time in many

sizes. Lower actuating-bolt installation torque requirement

than industry average. Unique cam action provides uncompromised engage-

ment, regardless of line pressure. Multi-Seal MJ Gasket available in 4”-12” PVC. Fits

both IPS and D.I. PVC pipe. No modifications necessary to the 120’s to install on

C-900 or IPS size PVC pipe. 1/2” Longer T-bolts than most other manufacturers to

accommodate C110 fittings. Contoured wedges for maximum pipe engagement. Positive visual break away nuts. Visible wedge engagement simplifies field inspection. 3° Pipe Deflection on 3”, 5° on 4” through 12”, 2° on

14”-16”, 1-1/2° on 18”-24”, 1° on 30”-48”. Color coded wedges and nuts to easily identify pipe

application: Red for PVC and Black for Ductile Iron. All essential parts remain intact, even if the fitting is

removed - no loose parts in the ditch. Independent wedge engagement provides superior

restraining capabilities with maximum pipe deflection. Secondary hex shank for easy removal and re-instal-

lation. Eliminates need for costly concrete thrust blocks.

Material SpecificationsGLAND: 65-45-12 Ductile Iron (ASTM A536)WEDGES: Single tooth ductile iron, heat treated for

ductile iron pipe applications.ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536).BREAKAWAY NUTS: Carbon Steel.COATING: Gland is Flexi-CoatTM Epoxy per AWWA C213.

Wedges and Actuating Bolts are E-coated Epoxy.Kit Specifications

GASKET: Standard Mechanical Joint. AWWA C111 andANSI A21.11 SBR or Multi-Seal Gasket.

T-BOLTS: HSLA (High Strength Low Alloy).Optional: 304 Stainless Steel, Flouropolymer coated.Material specifications are subject to change.

4

Patents US 7484775, US 7748100 & CA 2511782

Pressure Ratings (PSI) for 120 Cam-LocksTM on PVCANSI/AWWA

C900 D.I. O.D.ANSI/AWWA

C905 D.I. O.D.ASTM

D2241 IPS O.D.DR 14 200 DR 18 235 SDR 17 250DR 18 150 DR 25 165* SDR 21 200DR 25 100 SDR 26 160

Note: Pressure ratings are for ordinary waterworks with transient surges only.See UL Listings for all ratings.

See note on page 5 about UL listing and FM approval.

Pressure Ratings (PSI) for 111 Cam-LocksTM on Ductile IronANSI/AWWA - C151 DI OD

4”-16” 350 PSI18”-48” 250 PSI

Note: ANSI/AWWA C905 DI OD - 30” : 150. 36” : 125.

Designed by Harold Kennedy & Associates, Inc.

Pressure Rating (PSI) for 111 Cam-LocksTM on Carbon SteelSchedule 20, 40, 80

Use Transition Gasket3”-12” 250 PSI

Cam-LockTM

111 120 Joint Restraints

Superior Cam-Action Restraint TechnologyUnlike other products on the mar-

ket that rely on a sliding wedge actionand higher external pipe loading, theSmith-Blair Cam-LockTM joint restraintutilizes a unique, patent-pending camaction and single tooth technology toachieve superior pipe restraint.

The cam action requires less instal-lation torque to engage the pipe, allow-ing the break-away nuts to snap offeasier and faster. This produces less

point loading on the pipe wall and helpsmake the Cam-LockTM easier to install.

The Cam-Lock’sTM actuating boltsare designed with no internal stops sothe actuating nuts only break awaywhen the wedge properly engages thepipe.

The Cam-Lock’sTM unique designallows installation on both IPS andDuctile size PVC pipe without modifica-tions.

For MJ Fittings on Ductile Iron Pipe and Carbon Steel (3”-12”)

*Note: In sizes 14” - 48” only the gaskets and hardware are boxed.

Cam-LockTM

before installationCam-LockTM

with wedge rotatedCam-LockTM

installed with nut off

5

Patents US 7484775, US 7748100 & CA 2511782

Cam-LockTM

111 Joint Restraints - Ductile Iron

FM Approved for sizes 4”-12” on duc-tile iron pipe at 175 psi and for sizes4”-12” on AWWA C900 Class DR18PVC pipe at 150 psi.

UL Listed in 3”-24” sizes for joining 3”-24” UL Listed Ductile Iron (D.I.) fit-tings to UL Listed Class 350 (3”-16”),Class 250 (18” & 24”), or Class 200(20”) D.I. pipe, or UL Listed AWWAC900 Class 150 DR18 PVC pressurepipe 4”-12”.

NominalSize

Inches

Pipe O.D.Inches

No. ofWedges

With D.I. Gaskets, Bolts andNuts Restraint Only

Catalog NumberBoxed

Wt. EachLbs.

Catalog NumberUn-Boxed Catalog Number Boxed Wt. Each

Lbs.3 3.96 2 111-03960000-000 10.5 111-03960001-900 111-03960001-000 6.54 4.80 2 111-04800000-000 11.8 111-04800001-900 111-04800001-000 7.16 6.90 3 111-06900000-000 17.8 111-06900001-900 111-06900001-000 11.28 9.05 3 111-09050000-000 20.3 111-09050001-900 111-09050001-000 13.1

10 11.10 6 111-11100000-000 32.5 111-11100001-900 111-11100001-000 26.012 13.20 8 111-13200000-000 40.4 111-13200001-900 111-13200001-000 31.514* 15.30 10 111-15300000-000 53.6 111-15300001-900 43.316* 17.40 12 111-17400000-000 66.3 111-17400001-900 54.118* 19.50 12 111-19500000-000 72.2 111-19500001-900 59.820* 21.60 14 111-21600000-000 83.8 111-21600001-900 69.824* 25.80 16 111-25800000-000 106.9 111-25800001-900 90.430* 32.00 20 111-32000000-000 287.936* 38.30 24 111-38300000-000 366.342* 44.50 28 111-44500000-000 585.148* 50.80 32 111-50800000-000 679.5

Multi-Seal MJ GasketJoint Restraints w/Multi-Seal MJ Gasket120

6

6" Multi-Seal MJ Gasket (6.63" - 6.90")

6" Multi-Seal MJGasket Profile

6" Standard MJGasket Profile

The Smith-Blair Multi-Seal MJ Gasketsaves both time and money. It is designed togive the distributor or end user the flexibility ofstocking and using one gasket. The Multi-SealMJ Gasket is designed to fit IPS and DuctileIron O.D. PVC pipe.

Cam-Locks for MJ Fittings on PVC Pipe with Multi-Seal MJ Gasket

NominalSize

Inches

PipeO.D.

Inches

No.of

Wedges

With Multi-Seal MJ Gasket,Nuts and Bolts

Catalog NumberWt.

EachLbs.

4 4.50-4.80 2 120-04500480-000 12.26 6.63-6.90 3 120-06630690-000 18.38 8.63-9.05 3 120-08630905-000 20.8

10 10.75-11.10 6 120-10751110-000 33.412 12.75-13.20 8 120-12751320-000 42.0

One gasket instead of two gaskets means less inventory.

SBR rubber compound for easy, reliable, leak-free joints.

Meets AWWA C111 gasket performance requirements.

Multi-SealMJ Gasket Features

Multi-Seal MJ GasketsFor IPS and Ductile Iron PVC Pipe

NominalSize

Inches

PipeO.D.

Inches

Catalog Number

Wt.EachLbs.

4 4.50-4.80 000-00036735-060 0.56 6.63-6.90 000-00036736-060 0.68 8.63-9.05 000-00036737-060 0.8

10 10.75-11.10 000-00036738-060 1.112 12.75-13.20 000-00036739-060 1.6

Cam-Lock Multi-Seal Kit-sold in carton qty. only.

Multi-Seal MJ Gasket, Appropriate number of T-bolts and Nuts (Sealed in Plastic Bag)

NominalSize

Inches

PipeO.D.

Inches

No. ofT-

boltsCatalog Number Carton

Qty.

Wt.EachLbs.

4 4.50-4.80 4 102-04500480-005 5 226 6.63-6.90 6 102-06630690-005 5 338 8.63-9.05 6 102-08630905-005 5 3510 10.75-11.10 8 102-10751110-005 5 4512 12.75-13.20 8 102-12751320-005 5 48

For MJ Fittings on PVC Pipe - without a kit† - BoxedNominal

SizeInches

PipeO.D.

Inches

No.of

Wedges

Without Gasket, Nuts and Bolts

Catalog NumberBoxed

Wt.EachLbs

3 3.50 2 120-03500001-000 7.04 4.50-4.80 2 120-04800001-000 8.36 6.63-6.90 3 120-06900001-000 12.48 8.63-9.05 3 120-09050001-000 14.910 10.75-11.10 6 120-11100001-000 25.712 12.75-13.20 8 120-13200001-000 34.1

Skid Quantity and Weight*** Nominal

Size InchesSkid

QuantityApproximate

Weight

4 240 1650

6 144 1760

8 108 1778

10 72 1333

12 48 1650

14 48 2231

16 36 2089

18 24 1564

20 24 1936

24 12 1184

30 TBD TBD

36 TBD TBD

42 TBD TBD

48 TBD TBD

***Applies to both boxed and un-boxed Cam-LockTM Joint Restraints.

†Suitable Cam-Lock™ applications for PVC are limited to SDR 26 or heavier wall pipe, as defined by ASTM D2241.

For MJ Fittings on PVC Pipe - with a kit† - Boxed

7

For MJ Fittings on PVC Pipe - without a kit†

Patents US 7484775, US 7748100 & CA 2511782

For MJ Fittings on PVC Pipe with Multi-Seal MJ Gasket, see page 6.

See note on page 5 about UL listing and FM approval.

Cam-LockTM

120 Joint Restraints - PVC

NominalSizes Inches

Pipe O.D.Inches

No. ofWedges

With D.I. Gasket, Nuts and Bolts Pipe O.D.Inches

With IPS Gasket, Nuts and Bolts

Catalog NumberBoxed Wt. Each Lbs. Catalog Number

BoxedWt. Each

Lbs.3 - 2 - - 3.50 120-03500000-001 114 4.80 2 120-04800000-000 12.2 4.50 120-04800000-001 12.26 6.90 3 120-06900000-000 18.3 6.63 120-06900000-001 18.38 9.05 3 120-09050000-000 20.8 8.63 120-09050000-001 20.8

10 11.10 6 120-11100000-000 33.4 10.75 120-11100000-001 33.412 13.20 8 120-13200000-000 42.0 12.75 120-13200000-001 42.014* 15.30 10 120-15300000-000 55.4

“*Note: 14” - 36” only gaskets and hardware are boxed.

16* 17.40 12 120-17400000-000 68.418* 19.50 12 120-19500000-000 74.820* 21.60 14 120-21600000-000 86.924* 25.80 16 120-25800000-000 109.830* 32.00 20 120-32000000-000 291.036* 38.30 24 120-38300000-000 370.1

NominalSize

Inches

Pipe O.D.Wedges

No. ofWedges

Without Gasket, Nuts and BoltsCatalog Number

Un-Boxed Wt. Each Lbs.

3 3.50 2 120-03500001-900 7.04 4.50-4.80 2 120-04800001-900 8.36 6.63-6.90 3 120-06900001-900 12.48 8.63-9.05 3 120-09050001-900 14.9

10 10.75-11.10 6 120-11100001-900 25.712 12.75-13.20 8 120-13200001-900 34.114 15.30 10 120-15300001-900 45.116 17.40 12 120-17400001-900 56.218 19.50 12 120-19500001-900 62.420 21.60 14 120-21600001-900 72.924 25.80 16 120-25800001-900 93.2

The 120 Cam-Locks have been tested without failure according to ASTM F 1674-05 on sizes 4” through 12” DR 18 PC 150pipe conforming to the requirements of AWWA C900.

8

Bell-Lock Serrated Joint Restraints115 & 165 For MJ Fittings, Bell and Spigot Joints andsome Push-On Fittings for PVC and Ductile Iron* Pipe *Contact your Smith-Blair representative for ductile iron pipe applications.

Smith-Blair® Bell-Lock™ restraints provide a quickand efficient means of restraining hydrants, valves, pipebells and fittings used in water and wastewater systems.

State of the art manufacturing, combined withextensive testing, produces great performancecharacteristics with this multi-purpose design.

Smith Blair® Bell-Lock Restraints incorporate a splitdesign with machined serrations that provide nearly 360degrees of engagement for maximum performance andpipe support.

Bi-directional serrations, machined to exacttolerances, eliminate installation errors associated withother designs. Each serrated half is constructed from 65-45-12 Ductile Iron, meeting ASTM A536 for strength anddurability.

Recessed shoulders lock the clamp bolts into place,providing easier installation, even in the most adverseconditions.

Bell-Lock restraints are designed to maintain full pipedeflection when used in conjunction with standardmechanical joint or push-on fittings.

Bell-Lock™ Features Recessed shoulders allow for single wrench installation Compatible with standard mechanical joint and some

push-on style fittings. Maintains full pipe deflection. 360° of pipe support provided - uncompromised restraint Adaptable for new and/or existing pipeline applications. Easily installs outside the trench. Eliminates need for costly concrete thrust blocks.

Material SpecificationsRESTRAINER: 65-45-12 ductile ironT-BOLTS &HEX NUTS: High strength, low alloy

RODS: High strength, low alloy or alloy steel meeting ASTM A193 GR B7

CLAMPING BOLTS: A449 Grade 5 steelCOATING: Shop Coat

Material specifications subject to change.

8-inch115 Assembly

8-inch165 Assembly

Pressure ratings are for ordinary waterworks with transient surges only. Bell-Locks larger than 16” are not recommended for useon ductile iron pipe. Standard safety factor (SF) is 2:1. SF is derated on 10” and 12” push-on type fittings which will not accommo-date all of the restraining t-bolts.

Pressure Ratings on PVC

Pressure Ratings on Ductile IronANSI/AWWAC151 DI OD

4”-6” 350 PSI8” 300 PSI

10” 250 PSI12” 200 PSI14” 150 PSI16” 100 PSI

ANSI/AWWAC900 DI OD

ANSI/AWWAC905 CI OD

ASTM D2241 IPS/STEEL OD

DR 14 200 DR 18 235 SDR 17 250

DR 18 150 DR 21 200 SDR 21 200

DR 25 100 DR 25 165 SDR 26 160

- - DR 32.5 125 - -

Optional 304 Stainless Steel Hardware Available.

Bell-Lock Serrated Joint Restraints115 & 165 For MJ Fittings, Bell and Spigot Joints andsome Push-On Fittings for PVC and Ductile Iron* Pipe *Contact your Smith-Blair representative for ductile iron pipe applications.

9

For MJ Fittings and Push-On Joints†

(One restraint and T-bolts)

NominalSize

Inches

PipeO.D.

Inches

Ductile Iron Size PipePipeO.D.

Inches

IPS Size Pipe

Catalog NumberBoxed

Wt.EachLbs

Catalog NumberBoxed

Wt.EachLbs

4 4.80 115-04800000-000 7.8 4.50 115-04500000-000 8.36 6.90 115-06900000-000 10.2 6.63 115-06630000-000 11.18 9.05 115-09050000-000 15.5 8.63 115-08630000-000 17.3

10 11.10 115-11100000-000 25.5 10.75 115-10750000-000 27.812 13.20 115-13200000-000 27.6 12.75 115-12750000-000 30.814* 15.30 115-15300000-000 63.1

*Bolts in sizes 14”-24” are all-thread instead oft-bolts.

16* 17.40 115-17400000-000 68.518* 19.50 115-19500000-000 90.020* 21.60 115-21600000-000 100.624* 25.80 115-25800000-000 132.9

For Bell and Spigot PVC Joints†

(Two restraints with rods)

NominalSize

Inches

PipeO.D.

Inches

Ductile Iron Size PipePipeO.D.

Inches

IPS Size Pipe

Catalog NumberBoxed

Wt.EachLbs

Catalog NumberBoxed

Wt.EachLbs

4 4.80 165-04800000-000 15.6 4.50 165-04500000-000 16.66 6.90 165-06900000-000 20.3 6.63 165-06630000-000 22.18 9.05 165-09050000-000 31.0 8.63 165-08630000-000 34.610 11.10 165-11100000-000 52.1 10.75 165-10750000-000 56.712 13.20 165-13200000-000 56.3 12.75 165-12750000-000 62.714* 15.30 165-15300000-000 123.0

*Bolts in sizes 14”-24” are all-thread instead oft-bolts.

16* 17.40 165-17400000-000 133.718* 19.50 165-19500000-000 175.620* 21.60 165-21600000-000 201.324* 25.80 165-25800000-000 265.8

†Suitable Bell-Lock applications for PVC are limited to SDR 26 or heavier wall pipe, as defined by ASTM D2241.

Pipe-Lock470 Series Fabricated Restraint Steel Sleeve CouplingsAvailable in sizes 3”- 48”

Material SpecificationsPipe-Lock Sleeve Specifications

SLEEVE: ASTM A283 Gr. C or carbon steel having a minimum yield of 30,000 PSI.

FINISH: Flexi-Coat®, Fusion Bonded Epoxy.

Cam-LockTM SpecificationsGLAND: 65-45-12 Ductile Iron (ASTM A536).WEDGES: Single tooth ductile iron, heat treated for

ductile iron pipe applications.ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536).

BREAKAWAY NUTS: Carbon Steel or Cast Iron.FINISH: Gland is Flexi-Coat® Epoxy per AWWA

C213.Wedges are E-coated Epoxy.Actuating Bolts are E-coated Epoxy.

Kit SpecificationsGASKET: SBR-Standard Mechanical Joint. AWWA

C111 and ANSI A21.11 SBR or Multi-Seal Gasket.

STUDS/NUTS: High Strength Low Alloy, per AWWA C111Optional: 304 Stainless Steel, Flouropolymer coated.


Pressure Rating: See page 2 under “Working Pressure”

473Pipe-Lock

Restraint Coupling

10

Features Available in Straight, Transition and Reducing complete

couplings.Restrains plain end pipe to plain end pipe.Use with the Multi-Seal Gasket for more flexibility in

nominal sizes 4”-12” - mixing IPS and D.I. O.D. PVC. Longer sleeves available. Sleeve and Cam-Lock gland coated with Flexi-Coat®

Fusion Bonded Epoxy per AWWA C213 for superior corrosion protection.

Restrains plain end pipe to plain end pipe.Can join IPS PVC or D.I. O.D. PVC to DI or Carbon Steel

with the appropriate Cam-Locks on each end.Restrained joint requires no other method of restraining

the pipe.Comes as a complete unit (sleeve, 2 Cam-Locks, 2

gaskets, appropriate number of studs) or as a sleeve only to use with your existing inventory.

Ordering the sleeves, Cam-Locks and hardware sepa-rately gives you flexibility with your inventory.

More Reducing combinations avabilable.

476Pipe-Lock

Restraint Coupling

Pipe-Lock471 Restraint Steel Sleeve CouplingStraight - Ductile Iron X Ductile Iron

Nom.Pipe

Size In.

Pipe O.D.Inches Catalog No.

SleeveThk. X Lgth. In. Studs Approx.

ShipWt. Lbs.(A) (B) No. Dia. In. Lgth. In.

(C)3 3.96 471-00000396-203 .25 7 4 .63 16 294 4.80 471-00000480-203 .25 7 4 .75 18 356 6.90 471-00000690-203 .25 7 6 .75 18 526 6.90 471-00000690-303 .25 10 6 .75 20 608 9.05 471-00000905-203 .25 7 6 .75 18 618 9.05 471-00000905-303 .25 10 6 .75 20 70

10 11.10 471-00001110-203 .25 7 8 .75 18 9010 11.10 471-00001110-303 .25 10 8 .75 20 10212 13.20 471-00001320-203 .25 7 8 .75 18 11012 13.20 471-00001320-303 .25 10 8 .75 20 12214 15.30 471-00001530-203 .25 7 10 .75 18 13914 15.30 471-00001530-303 .25 10 10 .75 20 15416 17.40 471-00001740-203 .25 7 12 .75 18 16816 17.40 471-00001740-303 .25 10 12 .75 20 18618 19.50 471-00001950-203 .25 7 12 .75 18 18418 19.50 471-00001950-303 .25 10 12 .75 20 20320 21.60 471-00002160-203 .25 7 14 .75 18 21220 21.60 471-00002160-303 .25 10 14 .75 20 23324 25.80 471-00002580-203 .25 7 16 .75 18 26624 25.80 471-00002580-303 .25 10 16 .75 20 291

+30 32.00 471-00003200-303 .25 10 20 1.0 24 644+30 32.00 471-00003200-503 .25 16 20 1.0 30 787+36 38.30 471-00003830-303 .25 10 24 1.0 24 813+36 38.30 471-00003830-503 .25 16 24 1.0 30 986+42 44.50 471-00004450-303 .25 10 28 1.25 24 1,263+42 44.50 471-00004450-503 .25 16 28 1.25 30 1,464+48 50.80 471-00005080-303 .25 10 32 1.25 24 1,465+48 50.80 471-00005080-503 .25 16 32 1.25 30 1,694

11

Standard MJ Gaskets will be used unless otherwise noted.+Uses Smith-Blair MJ Gasket.

Pipe-Lock472 Restraint Steel Sleeve CouplingStraight - PVC X PVC

12

Nom.Pipe

Size In.Pipe O.D. Inches Catalog No.


ShipWt. Lbs.(A) (B) No. Dia. In. Lgth. In.

(C)3 3.50 472-00000350-203 .25 7 4 .63 16 29*4 *4.50-4.80 X *4.50-4.80 472-00000480-243 .25 7 4 .75 18 364 4.50 472-00000450-203 .25 7 4 .75 18 364 4.80 472-00000480-203 .25 7 4 .75 18 36*6 *6.63-6.90 X *6.63 X 6.90 472-00000690-243 .25 7 6 .75 18 52*6 *6.63-6.90 X *6.63 X 6.90 472-00000690-343 .25 10 6 .75 20 616 6.63 472-00000663-203 .25 7 6 .75 18 526 6.63 472-00000663-303 .25 10 6 .75 20 616 6.90 472-00000690-203 .25 7 6 .75 18 526 6.90 472-00000690-303 .25 10 6 .75 20 61*8 *8.63-9.05 X *8.63-9.05 472-00000905-243 .25 7 6 .75 18 62*8 *8.63-9.05 X *8.63-9.05 472-00000905-343 .25 10 6 .75 20 718 8.63 472-00000863-203 .25 7 6 .75 18 628 8.63 472-00000863-303 .25 10 6 .75 20 718 9.05 472-00000905-203 .25 7 6 .75 18 628 9.05 472-00000905-303 .25 10 6 .75 20 71

*10 *10.75-11.10 X *10.75-11.10 472-00001110-243 .25 7 8 .75 18 92*10 *10.75-11.10 X *10.75-11.10 472-00001110-343 .25 10 8 .75 20 10310 10.75 472-00001075-203 .25 7 8 .75 18 9210 10.75 472-00001075-303 .25 10 8 .75 20 10310 11.10 472-00001110-203 .25 7 8 .75 18 9210 11.10 472-00001110-303 .25 10 8 .75 20 103*12 *12.75-13.20 X *12.75-13.20 472-00001320-243 .25 7 8 .75 18 114*12 *12.75-13.20 X *12.75-13.20 472-00001320-343 .25 10 8 .75 20 12512 12.75 472-00001275-203 .25 7 8 .75 18 11412 12.75 472-00001275-303 .25 10 8 .75 20 12512 13.20 472-00001320-203 .25 7 8 .75 18 11412 13.20 472-00001320-303 .25 10 8 .75 20 12514 15.30 472-00001530-203 .25 7 10 .75 18 14214 15.30 472-00001530-303 .25 10 10 .75 20 15716 17.40 472-00001740-203 .25 7 12 .75 18 17216 17.40 472-00001740-303 .25 10 12 .75 20 19018 19.50 472-00001950-203 .25 7 12 .75 18 19018 19.50 472-00001950-303 .25 10 12 .75 20 20820 21.60 472-00002160-203 .25 7 14 .75 18 21820 21.60 472-00002160-303 .25 10 14 .75 20 24024 25.80 472-00002580-203 .25 7 16 .75 18 27224 25.80 472-00002580-303 .25 10 16 .75 20 297

+30 32.00 472-00003200-303 .25 10 20 1.00 24 650+30 32.00 472-00003200-503 .25 16 20 1.00 30 793+36 38.30 472-00003830-203 .25 10 24 1.00 24 821+36 38.30 472-00003830-503 .25 16 24 1.00 30 993

Standard MJ Gaskets will be used unless otherwise noted.*Uses Multi-Seal Gasket.+Uses Smith-Blair MJ Gasket.

Nom.Pipe

Size In.

Pipe O.D. InchesCatalog No.


ShipWt. Lbs.PVC DI (A) (B) No. Dia. In. Lgth. In.

(C)3 3.50 3.96 473-03500396-203 .25 7 4 .63 16 294 *4.50-4.80 4.80 473-04800480-243 .25 7 4 .75 18 364 4.50 4.80 473-04500480-203 .25 7 4 .75 18 364 4.80 4.80 473-04800480-203 .25 7 4 .75 18 366 *6.63-6.90 6.90 473-06900690-243 .25 7 6 .75 18 526 *6.63-6.90 6.90 473-06900690-343 .25 10 6 .75 20 606 6.63 6.90 473-06630690-203 .25 7 6 .75 18 526 6.90 6.90 473-06900690-303 .25 10 6 .75 20 608 *8.63-9.05 9.05 473-09050905-243 .25 7 6 .75 18 618 *8.63-9.05 9.05 473-09050905-343 .25 10 6 .75 20 708 8.63 9.05 473-08630905-203 .25 7 6 .75 18 618 9.05 9.05 473-09050905-303 .25 10 6 .75 20 7010 *10.75-11.10 11.10 473-11101110-243 .25 7 8 .75 18 9010 *10.75-11.10 11.10 473-11101110-343 .25 10 8 .75 20 10110 10.75 11.10 473-10751110-203 .25 7 8 .75 18 9010 10.75 11.10 473-10751110-303 .25 10 8 .75 20 10110 11.10 11.10 473-11101110-203 .25 7 8 .75 18 9010 11.10 11.10 473-11101110-303 .25 10 8 .75 20 10112 *12.75-13.20 13.20 473-13201320-243 .25 7 8 .75 18 11112 *12.75-13.20 13.20 473-13201320-343 .25 10 8 .75 20 12312 12.75 13.20 473-12751320-203 .25 7 8 .75 18 11112 12.75 13.20 473-12751320-303 .25 10 8 .75 20 12312 13.20 13.20 473-13201320-203 .25 7 8 .75 18 11112 13.20 13.20 473-13201320-303 .25 10 8 .75 20 12314 15.30 15.30 473-15301530-203 .25 7 10 .75 18 14114 15.30 15.30 473-15301530-303 .25 10 10 .75 20 15616 17.40 17.40 473-17401740-203 .25 7 12 .75 18 17016 17.40 17.40 473-17401740-303 .25 10 12 .75 20 18818 19.50 19.50 473-19501950-203 .25 7 12 .75 18 18718 19.50 19.50 473-19501950-303 .25 10 12 .75 20 20620 21.60 21.60 473-21602160-203 .25 7 14 .75 18 21520 21.60 21.60 473-21602160-303 .25 10 14 .75 20 23624 25.80 25.80 473-25802580-203 .25 7 16 .75 18 26924 25.80 25.80 473-25802580-303 .25 10 16 .75 20 294

+30 32.00 32.00 473-32003200-303 .25 10 20 1.00 24 647+30 32.00 32.00 473-32003200-503 .25 16 20 1.00 30 790+36 38.30 38.30 473-38303830-203 .25 10 24 1.00 24 817+36 38.30 38.30 473-38303830-503 .25 16 24 1.00 30 989

Pipe-Lock473 Restraint Steel Sleeve CouplingStraight - PVC X Ductile Iron

13

Standard MJ Gaskets will be used unless otherwise noted.*Uses Multi-Seal Gasket.+Uses Smith-Blair MJ Gasket.

14

Pipe-Lock477 Restraint Steel Sleeve Sleeve Only - Straight

Nom. Pipe Size In. Catalog No.

Sleeve Thk. X Lgth. In. Approx. Ship Wt. Lbs.

(A) (B)

3 477-00030003-200 .25 7 84 477-00040004-200 .25 7 126 477-00060006-200 .25 7 166 477-00060006-300 .25 10 218 477-00080008-200 .25 7 218 477-00080008-300 .25 10 27

10 477-00100010-200 .25 7 2510 477-00100010-300 .25 10 3312 477-00120012-200 .25 7 2912 477-00120012-300 .25 10 3814 477-00140014-200 .25 7 3414 477-00140014-300 .25 10 4416 477-00160016-200 .25 7 3816 477-00160016-300 .25 10 5018 477-00180018-200 .25 7 4218 477-00180018-300 .25 10 5620 477-00200020-200 .25 7 4720 477-00200020-300 .25 10 6224 477-00240024-200 .25 7 5524 477-00240024-300 .25 10 7330 477-00300030-200 .25 10 9030 477-00300030-300 .25 16 13336 477-00360036-200 .25 10 10736 477-00360036-300 .25 16 15942 477-00420042-200 .25 10 12442 477-00420042-300 .25 16 18448 477-00480048-200 .25 10 14148 477-00480048-300 .25 16 210

Straight

470 Series Reducing Restraint Couplings andSleeves available. Please contact Smith-Blair formore information.

474 - Reducing - Ductile Iron X Ductile Iron.475 - Reducing - PVC X PVC476 - Reducing - PVC X Ductile Iron477 - Reducing - Sleeve Only

Pipe-Lock470 Series Components Chart

15

Nom. Pipe Size In.

Stud CatalogNumber Description Nut

Catalog Number Description

3 000-00090225-005 5/8” x 16” All-Thread Alloy. 000-000100025-005 5/8” Hex Head Alloy.

Studs for 7” Sleeve

Nom. Pipe Size In.

Stud SetCatalog Number Description

6-24 101-00090218-005 3/4” x 20” All-Thread Alloy. Set includes 1 Stud & 2 Nuts.

30-36 101-00090840-005 1” x 24” All-Thread Alloy. Set includes 1 Stud & 2 Nuts.

42-48 101-00090842-005 1 1/4” x 24” All-Thread Alloy. Set includes 1 Stud & 2 Nuts.


Nom. Pipe Size In.


30-36 101-00090841-005 1” x 30” All-Thread Alloy. Set includes 1 Stud & 2 Nuts.

42-48 101-00090843-005 1 1/4” x 30” All-Thread Alloy. Set includes 1 Stud & 2 Nuts.


Nom. Pipe Size In. Stud Quantity

3 44 46 6

8 6

10 8

12 8

14 10

16 12

18 12

20 14

24 16

30 20

36 24

42 28

48 32

Number of Studs Required

Note: 2 nuts per stud required.

Nom. Pipe Size In.


4-24 101-00090241-005 3/4” x 18” All-Thread Alloy. Set includes 1 Stud & 2 Nuts.

Nom. PipeSize In.

Ductile Iron IPS Multi-Seal

OD Catalog Number OD Catalog Number OD Catlog Number

3 3.96 000-00038572-060 3.50 000-00038573-0604 4.80 000-00036142-060 4.50 000-00038517-060 4.50-4.80 000-00036735-0606 6.90 000-00036143-060 6.63 000-00038518-060 6.63-6.90 000-00036736-0608 8.05 000-00036144-060 8.63 000-00038519-060 8.63-9.05 000-00036737-060

10 11.10 000-00036145-060 10.75 000-00038520-060 10.75-12.75 000-00036738-06012 13.20 000-00036146-060 12.75 000-00038521-060 12.75-13.20 000-00036739-06014 15.30 000-00038496-06016 17.40 000-00038497-06018 19.50 000-00038498-06020 21.60 000-00038499-06024 25.80 000-00038500-060

Gasket

16

Material SpecificationsFlange-Lock Body Specifications

BODY: ASTM A283 Gr. C or carbon steel having a minimum yield of 30,000 PSI.

FLANGE: *AWWA C207 Class D, ANSI 150 lb. drilling.Flat face.

FINISH: Flexi-Coat®, fusion bonded epoxy.

Cam-LockTM SpecificationsGLAND: 65-45-12 Ductile Iron (ASTM A536).WEDGES: Single tooth ductile iron, heat treated for

ductile iron pipe applications.ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536).

BREAKAWAY NUTS: Carbon Steel or Cast Iron.FINISH: Gland is Flexi-Coat® Epoxy per AWWA

C213.Wedges are E-coated.Actuating Bolts are E-coated Epoxy.

Kit Specifications

GASKET: SBR-Standard Mechanical Joint. AWWAC111 and ANSI A21.11 SBR or Multi-Seal Gasket.

T-BOLTS: High Strength Low Alloy, per AWWA C111Optional: 304 Stainless Steel, Flouropolymer coated.


Smith-Blair Flanged Coupling Adapters (FCA) withCam-LockTM Joint Restraints include a FCA body, Cam-LockTM, MJ Gasket and T-bolts. It does not include aflange gasket or hardware for flange-to-flange connec-tion.

Pressure Rating: 150 PSI with 1.5:1 Safety Factor.

Flange-Lock911 & 920 Flanged Mechanical Joint Coupling Adapter withCam-LockTM Joint Restraint

*300 lb. flanges available for 300 PSI applications. For other flanges, contact Smith-Blair for specific details and pricing. The pass through feature may not be available with some flanges.


Features Transitions available in a variety of combinations

(i.e. 16” Flanged Coupling adapter with 14” restraint end).

A wide variety of flange drillings available. Customized body lengths available. Flexi-Coat® fusion bonded epoxy coating per AWWA

C213 standard. Flange-Lock allows the pipe to completely pass through

for easier installation. (Pass through feature is not avail-able for raised face flanges).*

Includes Cam-LockTM Joint Restraint with kit. Smaller and larger size bodies available.

111Cam-LockTM

Joint Restraint

923Flanged

x MJ Coupling Adapter

+ =

911Flange- Lock

Restrained FCA

Cam-LockJoint Restraint

MJGasket

Adapter

Pipe

17

Cam-LockJoint Restraint

MJGasket

Adapter

B C A

Nom.Pipe

Size (In.)

O.D. Range(In.)

Nom.Flange

Range (In.)Catalog Number Weight

Each (lbs)

Dimensions/Inches

A1 B C D E2 Max. JointDeflection3

3 3.96 3 911-03960300-000 25 9.82 7.50 4.62 7.88 3.00 3°4 4.80 4 911-04800400-000 35 10.67 9.00 5.00 7.88 3.00 5°6 6.90 6 911-06900600-000 49 11.19 11.00 7.03 7.88 3.00 5°8 9.05 8 911-09050800-000 62 13.29 13.50 9.25 7.88 3.00 5°

10 11.10 10 911-11101000-000 85 16.97 16.00 11.25 7.88 3.00 5°12 13.20 12 911-13201200-000 112 19.07 19.00 13.38 7.88 3.00 5°14 15.30 14 911-15301400-000 134 21.18 21.00 15.50 8.13 3.00 2°16 17.40 16 911-17401600-000 163 23.28 23.50 17.59 8.13 3.00 2°18 19.50 18 911-19501800-000 176 25.98 25.00 19.69 8.13 3.00 1.5°20 21.60 20 911-21602000-000 206 28.08 27.50 21.78 8.13 3.00 1.5°24 25.80 24 911-25802400-000 264 32.28 32.00 26.00 8.13 3.00 1°30 32.00 30 911-32003000-000 563 39.42 38.75 32.20 11.13 3.00 1°36 38.30 36 911-38303600-000 749 46.29 46.00 38.50 11.13 3.00 1°42 44.50 42 911-44504200-000 1091 53.62 53.00 44.70 11.13 3.00 1°48 50.80 48 911-50804800-000 1272 60.50 59.50 51.00 11.13 3.00 1°

911 Restraint FCA for Ductile Iron Pipe and Carbon Steel (3”-12”)

1Overall with twist-off nuts removed2Minimum pipe insertion from flange face3Maximum deflection achieved at minimum pipe insertion

Nom.Pipe

Size (In.)

O.D. Range(In.)

Nom.Flange


Each (lbs)

Dimensions/Inches


3 3.50 3 920-03500300-000 26 9.82 7.50 4.62 7.88 3.00 3°4 4.50-4.80 4 920-04800400-100 35 10.67 9.00 5.00 7.88 3.00 5°4 4.50 4 920-04500400-000 35 10.67 9.00 5.00 7.88 3.00 5°4 4.80 4 920-04800400-000 35 10.67 9.00 5.00 7.88 3.00 5°6 6.63-6.90 6 920-06900600-100 49 11.19 11.00 7.03 7.88 3.00 5°6 6.63 6 920-06630600-000 49 11.19 11.00 7.03 7.88 3.00 5°6 6.90 6 920-06900600-000 49 11.19 11.00 7.03 7.88 3.00 5°8 8.63-9.05 8 920-09050800-100 62 13.29 13.50 9.25 7.88 3.00 5°8 8.63 8 920-08630800-000 62 13.29 13.50 9.25 7.88 3.00 5°8 9.05 8 920-09050800-000 62 13.29 13.50 9.25 7.88 3.00 5°

920 Restraint FCA for PVC Pipe

Other sizes and sleeve lengths (D) available.

Flange-Lock Mechanical Joint CouplingAdapter with Cam-LockTM Joint Restraint911 and 920

DE

18

1Overall with twist-off nuts removed2Minimum pipe insertion from flange face3Maximum deflection achieved at minimum pipe insertion

923 FCA-Body Only-works with either 111 or 120 Cam LockTM

Nom.Pipe Size

(In.)

O.D.Range

(In.)

Nom.Flange


Each (lbs)

Dimensions/Inches

B C D E2

14 15.30 14 923-00001400-000 80 21.00 15.50 7.88 3.00

16 17.40 16 923-00001600-000 97 23.50 17.59 7.88 3.00

18 19.50 18 923-00001800-000 104 25.00 19.69 7.88 3.00

20 21.60 20 923-00002000-000 122 27.50 21.78 7.88 3.00

24 25.80 24 923-00002400-000 157 32.00 26.00 7.88 3.00

30 32.00 30 923-00003000-000 275 38.75 32.20 11.33 3.00

36 38.30 36 923-00003600-000 383 46.00 38.50 11.33 3.00

42 44.50 42 923-00004200-000 506 53.00 44.70 11.33 3.00

48 50.80 48 923-00004800-000 593 59.50 51.00 11.33 3.00

920 Restraint FCA for D.I. O.D. PVC PipeNom.Pipe

Size (In.)

O.D. Range(In.)

Nom.Flange


Each (lbs)

Dimensions/Inches


10 10.25-11.10 10 920-11101000-100 86 13.29 13.50 9.25 7.88 3.00 5°10 10.75 10 920-10751000-000 86 16.97 16.00 11.25 7.88 3.00 5°10 11.10 10 920-11101000-000 86 16.97 16.00 11.25 7.88 3.00 5°12 12.75-13.20 12 920-13201200-100 113 19.07 19.00 13.38 7.88 3.00 5°12 12.75 12 920-12751200-000 113 19.07 19.00 13.38 7.88 3.00 5°12 13.20 12 920-13201200-000 113 19.07 19.00 13.38 7.88 3.00 5°14 15.30 14 920-15301400-000 136 21.18 21.00 15.50 7.88 3.00 2°16 17.40 16 920-17401600-000 165 23.28 23.50 17.59 7.88 3.00 2°18 19.50 18 920-19501800-000 178 25.98 25.00 19.69 7.88 3.00 1.5°20 21.60 20 920-21602000-000 209 28.08 27.50 21.78 7.88 3.00 1.5°24 25.80 24 920-25802400-000 268 32.28 32.00 26.00 7.88 3.00 1°30 32.00 30 920-32003000-000 566 39.42 38.75 32.20 11.13 3.00 1°36 38.30 36 920-38303600-000 752 46.29 46.00 38.50 11.13 3.00 1°

Other sizes and sleeve lengths (D) available.

Flange-Lock Mechanical Joint CouplingAdapter with Cam-LockTM Joint Restraint920 & 923 (continued)

19

Product Type & Page Number Application Type of Pipe For Pipe Sizes Working Pressure

Cam-LockTM JointRestraint Page 5


Ductile Iron

Steel

3" thru 48"

3” thru 12”

3"-16" 350 PSI18"-48"..250 PSI3”-12” 250 PSI

Cam-LockTM Joint Restraintw/Multi-Seal Gasket

Page 6


IPS or D.I.O.D.PVC

4" thru 12"Rated at the

pressure rating of the PVC pipe it isused on, up to 250 PSI.

Cam-LockTM JointRestraintPage 7


IPS O.D.PVC 3" thru 12"

Rated at the pressure rating of the PVC pipe it is

used on, up to 250 PSI.

Cam-LockTM Joint Restraint Page 7


D.I. O.D.PVC

4" thru 24"30” DR 25 15036” DR 25 125


PSI. 36” : 125 PSI.



PVCDuctile Iron




PVCDuctile Iron



Connecting plain end D.I. toplain end D.I. - Straight.

Ductile Iron 3”-48” (D.I.) 3”-16” : 350 PSI18”-48” : 250 PSI


Connecting plain end PVC toplain end PVC - Straight.

PVC 3”-36” (PVC)4”-24” : Rated at the

pressure rating of the PVC pipe it isused on, up to 250 PSI. 30” : 150

PSI. 36” : 125 PSI.


Connecting plain end D.I. toplain end PVC - Transition.

PVC X D.I. 3”-36” (PVC)3”-48” (D.I.)


PSI. 36” : 125 PSI.

Pipe-Lock Joint RestraintCoupling Page 14

Connecting plain end D.I. toplain end D.I. - Reducing.

D.I. X D.I. 3”-48” (D.I.) Rating based on larger of the 2OD’s: 3”-16” : 350 PSI

18”-48” : 250 PSI


Connecting plain end PVC toplain end PVC - Reducing.

PVC X PVC 3”-36” (PVC)(Rating based on larger of the 2 OD’s).

3”-24 ”: Rated at pressure rating ofPVC pipe on which it’s installed, up to250 PSI. 30” : 150 PSI. 36” : 125 PSI

Pipe-Lock Joint RestraintCouplingPages 14

Connecting plain end PVC toplain end D.I. - Reducing.

PVC X D.I. 3”-36” (PVC)3”-48” (D.I.)

4”-24” : Rated at the pressure rating of the larger PVC

pipe it is used on, up to 250 PSI. 30”: 150 PSI. 36” : 125 PSI.

Pipe-Lock Joint RestraintCoupling Pages 14

Weldment only -Straight andReducing.

PVC & D.I. 3” thru 48”N/A


Pages 17

Connecting & RestrainingFlanged to plain end pipe. Ductile Iron 3” thru 48”* 150 PSI


Pages 17-18

Connecting & RestrainingFlanged to plain end pipe. PVC 3” thru 48”* 3”-30” : 150 PSI

36” : 125 PSI


Pages 18

Weldment only -Straight andReducing. PVC & D.I. 3” thru 48”* N/A

111

120

115

120

911

165

920

471

472

473

474

475

476

477

120

923

Restraining Pipe Selection Guide and Index*Other sizes and sleeve lengths available.

Smith-Blair, Inc.30 Globe Ave.

Texarkana, AR 71854P.O. Box 5337

Texarkana, TX 75505

Inside Sales:Ph: (870) 773-5127 • (800) 643-9705 Fax: (870) 773-5212 • (800) 648-6792

www.smith-blair.com

Distributed by:

SWP/1500/031120

907 Restraint PlatesThree Hole Triangular - Carbon Steel

FLANGE DRILLING - 125, 150, CLASS “D” AND CLASS “E”

FLANGESIZE

INCHES

RECOMMENDEDTIE-ROD QUANTITY

MAXIMUM PRESSURE

“T” = LUGTHICKNESS

INCHES

TIE-RODSIZE

INCHES

“D” = LUG DIAMETER INCHES

(SEE NOTE 1)

CATALOGNUMBER

EACH LUG

CATALOG END CODE

EPOXYCOATED BARE

50 100 150 200 2504 2 2 2 2 2 .50 .63 6.19 907-04000001 -000 -0016 2 2 2 2 2 .50 .63 7.43 907-06000001 -000 -0018 2 2 2 2 2 .50 .63 10.25 907-08000001 -000 -001

10 2 2 2 3 3 .63 .63 12.50 907-10000101 -000 -00112 2 2 3 3 4 .63 .63 15.25 907-12000101 -000 -00114 2 2 3 3 4 .75 .75 16.75 907-14000202 -000 -00116 2 2 2 2 3 .75 1.00 19.25 907-16000204 -000 -00118 2 2 2 3 4 1.00 1.00 20.62 907-18000404 -000 -00120 2 2 3 3 4 1.00 1.00 22.88 907-20000404 -000 -00124 2 2 2 3 4 1.00 1.25 27.12 907-24000406 -000 -00130 2 2 3 4 6 1.25 1.25 33.62 907-30000606 -000 -00136 2 3 5 6 8 1.25 1.25 40.00 907-36000606 -000 -00142 2 4 6 8 10 1.25 1.25 46.75 907-42000606 -000 -00148 2 4 6 8 9 1.50 1.50 53.25 907-48000808 -000 -001

Note 1: CAUTION: Check lug diameter for clearanceover the flange hub. Some threaded flanges havelarge diameter hubs which may cause interference.

Standard MaterialASTM A36 or ASTM A283 Grade C.Other materials, coatings, thicknesses and rod size combinations availble upon request.

Smith-Blair, Inc. • 30 Globe Ave., Texarkana, AR 71854 • 870.773.5127 • 800.643.9705 • FAX 870.773.5212 • 800.648.6792

Part number example: 24 inch flange = 907-24000406-000.150 lb drilling1” plate thickness1.25” rod diameterEpoxy coated

Note 2: It is recommended that the tie rods be sym-metrically spaced around the flange bolt circle.

Form 907A Effective: 04/01/10 1

Smith-Blair, Inc. • 30 Globe Ave., Texarkana, AR 71854 • 870.773.5127 • 800.643.9705 • FAX 870.773.5212 • 800.648.6792Form 907A Effective: 04/01/102

Recommended for use with Smith-Blair 907 Restraint Plates. TIE ROD AND NUT SETS

ALLOY STEEL ALL THREADSET = 1 ROD AND 4 NUTS

SizeUNC

Catalog Number

18” 24” 30” 36” 42” 48”

5/8 101-00090040-404 101-00090874-404 101-00090684-404 101-00090541-404 101-00090855-404 10-100090856-4043/4 101-00090720-404 101-00090857-404 101-00090858-404 101-00090859-404 101-00090860-404 101-00090861-4041 101-00090739-404 101-00090480-404 101-00090862-404 101-00090852-404 101-00090863-404 101-00090864-404

1 1/4 101-00090865-404 101-00090866-404 101-00090867-404 101-00090828-404 101-00090868-404 101-00090869-4041 1/2 101-00090870-404 101-00090721-404 101-00090871-404 101-00090872-404 101-00090873-404 101-00090407-404

Standard MaterialRods - Alloy steel per ASTM A193 Grade B7Nuts - Low alloy steel heavy hex per ANSI A21.11 AWWA C 111Other rod materials and rod size combinations available upon request.

See page 1 of CC-907 restraint plate chart for recommended quantities.

Tie Rods and NutsAlloy Steel All Thread

221 Single Band

269Single Band Collar Leak

Stainless Steel

256Single Band Stainless Steel

Clamp, Coupling and Restraint Products CC 200 03/11

268High Pressure Repair Clamp

238 Tapped Single Band

Full Circle®

Repair Clamps221 226 229 227 228 238 239 256

257 261 269 262 263 264 265 267 268

ClampType Description

MetricNominal

SizesMM

NominalPipe Size

MaximumWorking Pressure

TemperatureRange

PageNumber

221

Low Pressure Single BandBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low Alloy

32 thru 350 2" thru 14" Up to 50 PSI* -20°F to +180°F 7

226

Single BandBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low Alloy

32 thru 350 2" thru 14" Up to 300 PSI* -20°F to +180°F 8-11

227

Double BandBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low Alloy


228

Multiple BandBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low Alloy

300 & larger 14" & larger Up to 100 PSI* -20°F to +180°F 14-16

229

Single Band Collar LeakBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low Alloy

50 thru 200 2" & larger Up to 150 PSI* -20°F to +180°F 17

238

Tapped Single BandBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low AlloyTaps: NPT, CC, or BSP


239

Tapped Double BandBand: Stainless SteelLugs: Ductile IronGasket: Nitrile (Buna N)Bolts: High Strength Low AlloyTaps: NPT, CC, or BSP


256

Single BandBand: Stainless SteelLugs: Cast Stainless SteelGasket: Nitrile (Buna N)Bolts: Stainless Steel


257

Double BandBand: Stainless SteelLugs: Cast Stainless SteelGasket: Nitrile (Buna N)Bolts: Stainless Steel


2

Selection Guide and Index

NSF 61 Listed

* The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer). For a particular installation, the allowable working pressure will be determined by the size of pipe, type clamp, type and extent of damage, service conditions, environmental conditions, and installation workmanship. Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.

ClampType Description

MetricNominal

SizesMM

NominalPipe Size

MaximumWorking Pressure

TemperatureRange

PageNumber

261

Single BandBand: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Studs: Stainless Steel


262

Double BandBand: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Studs: Stainless Steel


269

Single Band Collar LeakBand: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Studs: Stainless Steel


263

Multiple BandBand: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Studs: Stainless Steel

250 & larger** 10" & larger** Up to 100 PSI* -20°F to +180°F 32-33

264

Tapped Single BandBand: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Studs: Stainless SteelTap: NPT, CC, or BSP


265

Tapped Double BandBand: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Studs: Stainless SteelTap: NPT, CC, or BSP


267

High Pressure Repair ClampBody: Carbon SteelLugs: Carbon SteelGasket: Nitrile (Buna N)Bolts: High Strength Low Alloy

Steel


268

High Pressure Repair ClampBody: Stainless SteelLugs: Fab. Stainless SteelGasket: Nitrile (Buna N)Bolts: Stainless Steel


Helpful Hints................................................................................................................................................................... 39

3

Selection Guide and Index

NSF 61 Listed

* The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer). For a particular installation, the allowable working pressure will be determined by the size of pipe, type clamp, type and extentof damage, service conditions, environmental conditions, and installation workmanship. Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.

** Catalog sizesIf repairing full breaks or joining pipe, the gap between the pipe ends should be a maximum of 1/16” for pipe OD’s less than 4 1/4" for pipe OD’s 4” and greater in order to comply with the product’s NSF 61 Listing.

4

A Full circumference single or multiple section stainless steel bands are available in 5” thru 35” widths to fit virtually all types and sizes of pipe.

B All weldments including studs, sidebars and fingers areconstructed of premium grade stainless steel to minimize the possibility of corrosion.

C Smith-Blair®’s exclusive “C” shaped keeper bar permitsfast run-down of nuts against the clamps weldmentswhile equalizing tension along the full length of theclamp.

D Bridge plate flush mounted and bonded to the gasket assures even distribution of gasket pressure and preventscrimping.

E Gridded, tapered, overlapping gasket design offers excellent full curcumferential sealing and full adjustment to rough pipe surfaces.

F A special high-strength ductile iron alloy lug utilizes a strength efficient computer-aided design that’s notonly stronger, but lighter and easier to install. Lugsare Flexi-Coat® epoxy coated.

G Drop-in, self-securing bolts eliminate loose parts,save time and make installation possible with onlyone wrench.

H Lugs with mutually supporting sliding fingers toassure proper bolt alignment while tightening.Permits maximum torque without bending of bolts.

J The band locking system uses a unique lug coredesign and a band hemming process that resistspull-out and provides maximum band retention.

Copper electrical conductor buttons are available for most200 series Full Circle® Repair Clamps. Factory installed conductorbuttons are glued between the gasket and the stainless steel bandwith contact buttons protruding through specially prepared gaskets toaccommodate electric thawing of frozen pipelines.

When ordering clamps with factory installed conductor but-tons, change the first digit of the last three digits in the catalog num-ber to 7.

Smith-Blair’s design securely attaches the lug to theband.

A

B

C

D

E F

GH J

D E

General Information

Electrical Conductivity Buttons

EXAMPLE:XXX-XXXXXX-700 Conductor buttons and low alloy bolts. XXX-XXXXXX-701 Conductor buttons and stainless steel bolts.

5

Full Circle® Repair Clamps are flexible repair clampsconsisting of one or more stainless steel band sectionswhere cast lugs are securely attached to accommodatebolts and nuts for the purpose of mounting the clamp onthe pipe. They have a full encirclement, tapered, overlap-ping, gridded gasket with a flush mounted, bonded-instainless steel bridge plate to span the band openingbetween the lugs and to provide a full circumferential seal.

A Full Circle® Repair Clamp is fast and simple toinstall, and requires no special tools. The clamp is wrappedaround the pipe, properly positioned over the area to berepaired or connected, and the bolts tightened. This com-pacts the rubber gasket tightly against the full circumfer-ence of the pipe wall forming a leak resistant seal.

The Smith-Blair Full Circle® method of pipe repair is aquick, long lasting, economical solution to pipe repair prob-lems.

Warning: Full Circle® Repaired Clamps do not restrain axial pipemovement. Use of axial restraint device will be required.Note: Spring washers are required when these products are used onhigh density polyethylene pipe. Please refer to the HDPE applica-tion for details.

Smith-Blair, Inc. Full Circle® Repair Clamps solve these piping problems:

* When a gap between the ends of the pipe is one-inchor greater, a short section of pipe should be put inthe opening or a thin strip of sheet metal wrappedaround the opening to provide support to the gasket.

** Holes should not exceed 1/3 the clamp width. When asection of pipe wall equal to 40% or more of the pipecircumference is broken away, a section of sheet

metal should be placed over the opening to provide asealing surface for the gasket.

*** Pin holes require one inch of clamp width on bothsides of the damaged area.

****Cracks and splits require a small hole to be drilled ateach end to prevent spreading. One inch of clampwidth on both sides of the damaged area is required.

*Full break **Holes ****Cracks or splits

*Couple plain end pipeNew construction or repairs

*Couple deflected or slightlymisaligned pipe ends.

***Pin Holes

Pulled branch connec-tion in tapped AC pipe

coupling

*Full breaks at the serviceconnection or branch line

Pulled service connections orbranch lines

A

B

C

A. Broken asbestos cementpipe coupling.

B. Remove asbestos cementpipe coupling and replacewith Full Circle® repair clamp

C. Fish mouthed gasket in asbestos cement pipecoupling.

General Information

Lower material and labor costs because each size fits arange of pipe types within its range and can be used forrepair, joining or tapping.

Less crew, equipment, excavation and schedulingcomplications once the damaged pipe is exposedbecause one man with a single wrench can easily makethe repair.

No need for extra pipe fittings because flexible FullCircle Repair Clamps are able to conform to pipeirregularities and provide an efficient leak resistant seal.

No need for complete line shutdown and possiblecontamination because Full Circle® Repair Clamps canbe installed quickly and easily both out of water and

underwater. Tightening the centermost bolts will usuallystop flow of water, and then the other bolts can beequally tightened.

Compare the ease of the Full Circle® method to split mechanical sleeves or replacing a section of pipe and you will be convinced Full Circle® is the best method!

Product Features

Not Just a Repair Clamp!Full Circle® Repair Clamps are often used as a cou-pling to join plain end pipe for new installations andpipe replacement programs.

6

Bridge plates that are glued into recesses formed in thegasket during molding, may not fit the recess properly.There may be void spaces that create low pressure points,as at “A” and “B” above which are potential leak points.

Smith-Blair Repair Clamps seal positively and effectively

Other Methods of Bridge Plate

Bridge plates attached to the clamp band or glued to the outsideof the gasket have exposed metal edges that hold the bandaway from the gasket, setting up low pressure points as in “A”and “B” above, which are potential leak paths. The exposedmetal edge can also hang up on the clamp band and impedetightening of the clamp.

Smith-Blair tapered, lapped gaskets provide a continuous anduniform seal over the full O.D. range of the clamp.

Smith-Blair® bridge plates are precision set, flush mounted andsecurely bonded into the gasket during the molding operation.This provides a smooth surface, which insures a 100% encir-clement of uniform gasket pressure. A dependable method ofsealing.

Smith-Blair finely gridded gaskets have 16 grids to thesquare inch; form a series of dams to conform to irregulari-ties on the pipe surface; and seal effectively against rough orpitted surfaces to prevent development of a leak path.

Uniform Distribution of Gasket Pressure

Bridge Plate Glued on Top of Gasket Bridge Plate Glued in Molded Recess

PIPE

BAND GASKET

PIPE BA

BAND GASKET

PIPE BA

BAND GASKET

Smith-Blair Recessed Bridge PlateBonded-In Recessed Bridge Plate

Tapered and Lapped Gaskets Finely Gridded Gasket

There is a uniform distribution of gasket pressure over theentire circumfrencee of the pipe.

7

221 Full Circle® Repair Clamp Low Pressure, Single Band

Standard With Low Alloy Bolts & Nuts

With Stainless SteelBolts & Nuts

MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt. EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.Catalog Number Catalog Number

2 2.35 - 2.63 5 6 221-00023805-000 221-00023805-001 50 60-67 127 2.72 1/4-2 1/2 2.70 - 3.00 5 6 221-00027505-000 221-00027505-001 65 69-76 127 2.7

3 2.97 - 3.25 5 6 221-00030005-000 221-00030005-001 65-80 75-83 127 2.83.46 - 3.70 5 6 221-00035005-000 221-00035005-001 88-94 127 2.8

3-4 3.73 - 4.00 5 6 221-00037505-000 221-00037505-001 80-100 95-102 127 2.93.96 - 4.25 5 6 221-00040005-000 221-00040005-001 101-108 127 2.9

4 4.45 - 4.73 5 7 221-00045005-000 221-00045005-001 100 113-120 127 3.04.74 - 5.14 5 7 221-00048005-000 221-00048005-001 120-131 127 3.3

4-5 4.95 - 5.35 5 7 221-00050005-000 221-00050015-001 125 126-136 127 3.35.22 - 5.62 5 7 221-00052505-000 221-00052505-001 133-143 127 3.4

6

5.95 - 6.35 5 8 221-00060005-000 221-00060005-001

125-150

151-161 127 3.46.56 - 6.96 5 8 221-00066305-000 221-00066305-001 167-177 127 3.56.84 - 7.24 5 8 221-00069005-000 221-00069005-001 174-184 127 3.57.05 - 7.45 5 8 221-00071005-000 221-00071005-001 179-189 127 3.67.45 - 7.85 5 8 221-00074505-000 221-00074505-001 189-199 127 3.6

8

7.95 - 8.35 5 8 221-00080005-000 221-00080005-001

200

202-212 127 3.68.54 - 8.94 5 9 221-00086305-000 221-00086305-001 217-227 127 3.98.99 - 9.39 5 9 221-00090505-000 221-00090505-001 226-239 127 3.99.27 - 9.67 5 9 221-00094005-000 221-00094005-001 235-246 127 3.9

8-10 9.70 - 10.10 5 9 221-00100005-000 221-00100005-001 225 246-257 127 3.910.10 - 10.50 5 9 221-00102005-000 221-00102005-001 247-267 127 4.3

10

10.64 - 11.04 5 10 221-00107505-000 221-00107505-001

250

270-280 127 4.311.04 - 11.44 5 10 221-00111005-000 221-00111005-001 280-291 127 4.411.34 - 11.74 5 10 221-00114005-000 221-00114005-001 288-298 127 4.411.75 - 12.15 5 10 221-00117505-000 221-00117505-001 298-309 127 4.4

10-12 12.00 - 12.40 5 10 221-00120005-000 221-00120005-001 250-315 305-315 127 4.5

1212.62 - 13.02 5 10 221-00127505-000 221-00127505-001

300321-331 127 4.6

13.10 - 13.50 5 10 221-00132005-000 221-00132005-001 333-343 127 4.713.40 - 13.80 5 10 221-00134005-000 221-00134005-001 340-351 127 4.7

12-14 13.70 - 14.10 5 11 221-00137005-000 221-00137005-001 300-350 348-358 127 5.114.00 - 14.40 5 11 221-00140005-000 221-00140005-001 356-366 127 5.3

Smith-Blair 221 Low Pressure Single Band Full Circle®Repair Clamps provide a fast, economical means for repairingfull circumferential breaks, holes, cracks and other types of dam-age on cast iron, steel, asbestos cement, copper, aluminum,plastic, fiberglass and other types of pipe where the pressuredoes not exceed 50 PSI.

The clamps have a built-in O.D. range which enables themto fit several pipe outside diameters within their nominal pipesize range.

Low Pressure Full Circle® Repair Clamps feature a lap typegasket with molded tapered ends to provide efficient equalizedsealing at the lap joint on any pipe within the clamp’s range. Thegasket has a finely gridded surface with resilience to easily con-form to irregularities on rough pipe surface or in pitted areas,providing an effective seal all around the pipe.

A stainless steel bridge plate spans the opening of the lugsand is bonded flush into the gasket to prevent wrinkling in the lugarea, providing an even pressure around the full circumferenceof the pipe.

The band is made of stainless steel to provide corrosionresistance, flexibility and strength. The lugs are securelyattached to the stainless steel band and have mutually support-ing stabilizing fingers to permit maximum torquing of the bolts.The lug design includes a drop-in bolt feature that eliminatesloose parts, saves time and aids installation under adverse con-

Material Specifications

Band: Stainless Steel Type 304Lugs: Ductile Iron ASTM A536, 80-55-06Gasket: Nitrile (Buna N) compounded to produce

superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocar-bon and many other chemicals. Nominaltemperature range -20°F to 180°F.Consult manufacturer for specific applica-tions or other service temperatures.

Bridge Plate: Stainless steel recessed flush and bondedinto gasket.

Bolts: High strength, low-alloy steel with heavy semi-finished hexagon nuts Per ANSI B.18.2.2. Optional 304 stainless steel bolts with fluoropolymer coated nuts to prevent galling.

Note: HDPE Applications will require clamps with spring washers.Material specifications are subject to change.

ditions.The bolts and nuts are low alloy steel with rolled

threads, double radius heads and a generous shoulderto prevent bolt rotation under maximum torque loading(two per clamp).

Smith-Blair 226 Single Band Full Circle® RepairClamps provide a fast, economical means of repairing fullcircumferential breaks, holes, cracks and other types ofdamage to cast iron, steel, asbestos cement, copper, alu-minum, plastic, fiberglass and other types of pipe. Theclamps have a built-in O. D. range which enables them to fitseveral pipe outside diameters within their nominal pipe sizerange.

Full Circle® Repair Clamps feature a lap type gasketwith molded tapered ends to provide efficient equalized seal-ing at the lap joint on any pipe within the clamp’s range. Thegasket has a finely gridded surface with the resilience to eas-ily conform to irregularities on rough pipe surfaces or in pit-ted areas, providing an effective seal all around the pipe.

A stainless steel bridge plate spans the opening of thelugs and is bonded flush into the gasket to prevent wrinklingin the lug area, providing an even gasket pressure at allpoints around the full circumference of the pipe.

The band is made of stainless steel, selected to providecorrosion resistance, flexibility and strength.

Lugs are securely attached to the stainless steel bandand have mutually supporting stabilizing fingers to permitmaximum torquing of the bolts. The lug design includes adrop-in bolt feature that eliminates loose parts, saves timeand aids installation under adverse conditions.

The bolts and nuts are low alloy steel with rolled threads,double radius heads and a generous shoulder to prevent boltrotation under maximum torque loading.

226 Full Circle® Repair Clamp Single Band

Material SpecificationsBand: Stainless Steel Type 304Lugs: Ductile Iron ASTM A536, 80-55-06Gasket: Nitrile (Buna N) compounded to produce

superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon and many other chemicals. Nominal temperaturerange -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.

Bridge Plate: Stainless steel recessed flush and bonded into gasket.


Also available in metric sizesNote: HDPE Applications will require clamps with spring washers.

Material specifications are subject to change.

Band Width Inches Number of Bolts Bolt Sizes7.5 3

5/8" x 6"or

16mm x 152mm

10 412.5 515 620 825 1030 12

Standard w/Low Alloy Bolts & Nuts

w/Stainless Steel Bolts & Nuts

MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


22.35 - 2.63 7.5 9 226-00023807-000 226-00023807-001

5060-66 190 4.0

2.35 - 2.63 10 12 226-00023810-000 226-00023810-001 60-66 254 5.42.35 - 2.63 12.5 15 226-00023812-000 226-00023812-001 60-66 317 6.72.35 - 2.63 15 18 226-00023815-000 226-00023815-001 60-66 381 8.1

2 1/4-2 1/22.70 - 3.00 7.5 9 226-00027507-000 226-00027507-001

6569-76 190 4.0

2.70 - 3.00 10 12 226-00027510-000 226-00027510-001 69-76 254 5.42.70 - 3.00 12.5 15 226-00027512-000 226-00027512-001 69-76 317 6.72.70 - 3.00 15 18 226-00027515-000 226-00027515-001 69-76 381 8.1

32.97 - 3.25 7.5 9 226-00030007-000 226-00030007-001

6576-82 190 4.3

2.97 - 3.25 10 12 226-00030010-000 226-00030010-001 76-82 254 5.72.97 - 3.25 12.5 15 226-00030012-000 226-00030012-001 76-82 317 6.92.97 - 3.25 15 18 226-00030015-000 226-00030015-001 76-82 381 8.3

33.46 - 3.70 7.5 9 226-00035007-000 226-00035007-001

8088-93 190 4.2

3.46 - 3.70 10 13 226-00035010-000 226-00035010-001 88-93 254 5.83.46 - 3.70 12.5 16 226-00035012-000 226-00035012-001 88-93 317 7.13.46 - 3.70 15 18 226-00035015-000 226-00035015-001 88-93 381 8.5

3-43.73 - 4.00 7.5 9 226-00037507-000 226-00037507-001

8095-101 190 4.2

3.73 - 4.00 10 13 226-00037510-000 226-00037510-001 95-101 254 5.83.73 - 4.00 12.5 16 226-00037512-000 226-00037512-001 95-101 317 7.13.73 - 4.00 15 18 226-00037515-000 226-00037515-001 95-101 381 8.5

3-43.96 - 4.25 7.5 9 226-00040007-000 226-00040007-001

80-100101-107 190 4.2

3.96 - 4.25 10 13 226-00040010-000 226-00040010-001 101-107 254 5.83.96 - 4.25 12.5 16 226-00040012-000 226-00040012-001 101-107 317 7.13.96 - 4.25 15 18 226-00040015-000 226-00040015-001 101-107 381 8.5

8

9



MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


44.45 - 4.73 7.5 10 226-00045007-000 226-00045007-001

100114-120 190 4.4

4.45 - 4.73 10 13 226-00045010-000 226-00045010-001 114-120 254 6.04.45 - 4.73 12.5 16 226-00045012-000 226-00045012-001 114-120 317 7.34.45 - 4.73 15 19 226-00045015-000 226-00045015-001 114-120 381 8.7

4

4.74 - 5.14 7.5 11 226-00048007-000 226-00048007-001

100

121-130 190 4.84.74 - 5.14 10 15 226-00048010-000 226-00048010-001 121-130 254 6.74.74 - 5.14 12.5 18 226-00048012-000 226-00048012-001 121-130 317 8.14.74 - 5.14 15 21 226-00048015-000 226-00048015-001 121-130 381 9.64.74 - 5.14 20 28 226-00048020-000 226-00048020-001 121-130 508 12.84.74 - 5.14 25 35 226-00048025-000 226-00048025-001 121-130 635 16.14.74 - 5.14 30 41 226-00048030-000 226-00048030-001 121-130 762 19.0

4-5

4.95 - 5.35 7.5 11 226-00050007-000 226-00050007-001

100

126-135 190 4.94.95 - 5.35 10 14 226-00050010-000 226-00050010-001 126-135 254 6.54.95 - 5.35 12.5 17 226-00050012-000 226-00050012-001 126-135 317 8.04.95 - 5.35 15 21 226-00050015-000 226-00050015-001 126-135 381 9.74.95 - 5.35 20 28 226-00050020-000 226-00050020-001 126-135 508 12.94.95 - 5.35 25 35 226-00050025-000 226-00050025-001 126-135 635 16.24.95 - 5.35 30 42 226-00050030-000 226-00050030-001 126-135 762 19.4

4-5

5.22 - 5.62 7.5 11 226-00052507-000 226-00052507-001

125

133-142 190 4.95.22 - 5.62 10 15 226-00052510-000 226-00052510-001 133-142 254 6.75.22 - 5.62 12.5 18 226-00052512-000 226-00052512-001 133-142 317 8.25.22 - 5.62 15 22 226-00052515-000 226-00052515-001 133-142 381 9.95.22 - 5.62 20 29 226-00052520-000 226-00052520-001 133-142 508 13.25.22 - 5.62 25 36 226-00052525-000 226-00052525-001 133-142 635 16.5

6

5.95 - 6.35 7.5 11 226-00060007-000 226-00060007-001

125

152-161 190 5.05.95 - 6.35 10 15 226-00060010-000 226-00060010-001 152-161 254 7.05.95 - 6.35 12.5 18 226-00060012-000 226-00060012-001 152-161 317 8.55.95 - 6.35 15 22 226-00060015-000 226-00060015-001 152-161 381 10.25.95 - 6.35 20 30 226-00060020-000 226-00060020-001 152-161 508 13.65.95 - 6.35 25 37 226-00060025-000 226-00060025-001 152-161 635 16.95.95 - 6.35 30 44 226-00060030-000 226-00060030-001 152-161 762 20.3

6

6.56 - 6.96 7.5 12 226-00066307-000 226-00066307-001

150

167-176 190 5.36.56 - 6.96 10 16 226-00066310-000 226-00066310-001 167-176 254 7.26.56 - 6.96 12.5 19 226-00066312-000 226-00066312-001 167-176 317 8.86.56 - 6.96 15 23 226-00066315-000 226-00066315-001 167-176 381 10.46.56 - 6.96 20 31 226-00066320-000 226-00066320-001 167-176 508 14.16.56 - 6.96 25 38 226-00066325-000 226-00066325-001 167-176 635 17.66.56 - 6.96 30 45 226-00066330-000 226-00066330-001 167-176 762 20.6

6

6.84 - 7.24 7.5 12 226-00069007-000 226-00069007-001

150

174-183 190 5.36.84 - 7.24 10 16 226-00069010-000 226-00069010-001 174-183 254 7.26.84 - 7.24 12.5 19 226-00069012-000 226-00069012-001 174-183 317 8.96.84 - 7.24 15 23 226-00069015-000 226-00069015-001 174-183 381 10.56.84 - 7.24 20 31 226-00069020-000 226-00069020-001 174-183 508 14.06.84 - 7.24 25 39 226-00069025-000 226-00069025-001 174-183 635 17.56.84 - 7.24 30 46 226-00069030-000 226-00069030-001 174-183 762 21.0

6

7.05 - 7.45 7.5 12 226-00071007-000 226-00071007-001

150

180-189 190 5.37.05 - 7.45 10 16 226-00071010-000 226-00071010-001 180-189 254 7.27.05 - 7.45 12.5 19 226-00071012-000 226-00071012-001 180-189 317 8.97.05 - 7.45 15 23 226-00071015-000 226-00071015-001 180-189 381 10.57.05 - 7.45 20 31 226-00071020-000 226-00071020-001 180-189 508 14.37.05 - 7.45 25 39 226-00071025-000 226-00071025-001 180-189 635 17.57.05 - 7.45 30 47 226-00071030-000 226-00071030-001 180-189 762 21.4


10




MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


6

7.45 - 7.85 7.5 12 226-00074507-000 226-00074507-001

150

190-199 190 5.57.45 - 7.85 10 16 226-00074510-000 226-00074510-001 190-199 254 7.37.45 - 7.85 12.5 20 226-00074512-000 226-00074512-001 190-199 317 9.17.45 - 7.85 15 24 226-00074515-000 226-00074515-001 190-199 381 10.97.45 - 7.85 20 32 226-00074520-000 226-00074520-001 190-199 508 14.57.45 - 7.85 25 40 226-00074525-000 226-00074525-001 190-199 635 18.27.45 - 7.85 30 47 226-00074530-000 226-00074530-001 190-199 762 21.8

8

7.95 - 8.35 7.5 12 226-00080007-000 226-00080007-001

200

202-212 190 5.77.95 - 8.35 10 16 226-00080010-000 226-00080010-001 202-212 254 7.37.95 - 8.35 12.5 20 226-00080012-000 226-00080012-001 202-212 317 9.37.95 - 8.35 15 24 226-00080015-000 226-00080015-001 202-212 381 11.27.95 - 8.35 20 32 226-00080020-000 226-00080020-001 202-212 508 14.97.95 - 8.35 25 41 226-00080025-000 226-00080025-001 202-212 635 18.27.95 - 8.35 30 49 226-00080030-000 226-00080030-001 202-212 762 22.4

8

8.54 - 8.94 7.5 13 226-00086307-000 226-00086307-001

200

217-277 190 6.18.54 - 8.94 10 17 226-00086310-000 226-00086310-001 217-277 254 7.98.54 - 8.94 12.5 21 226-00086312-000 226-00086312-001 217-277 317 9.68.54 - 8.94 15 25 226-00086315-000 226-00086315-001 217-277 381 11.48.54 - 8.94 20 34 226-00086320-000 226-00086320-001 217-277 508 15.58.54 - 8.94 25 42 226-00086325-000 226-00086325-001 217-277 635 18.68.54 - 8.94 30 50 226-00086330-000 226-00086330-001 217-277 762 23.2

8

8.99 - 9.39 7.5 13 226-00090507-000 226-00090507-001

200

229-238 190 6.08.99 - 9.39 10 17 226-00090510-000 226-00090510-001 229-238 254 8.08.99 - 9.39 12.5 21 226-00090512-000 226-00090512-001 229-238 317 9.88.99 - 9.39 15 25 226-00090515-000 226-00090515-001 229-238 381 11.68.99 - 9.39 20 35 226-00090520-000 226-00090520-001 229-238 508 15.98.99 - 9.39 25 43 226-00090525-000 226-00090525-001 229-238 635 19.98.99 - 9.39 30 50 226-00090530-000 226-00090530-001 229-238 762 22.8

8

9.27 - 9.67 7.5 13 226-00094007-000 226-00094007-001

200

236-245 190 6.19.27 - 9.67 10 17 226-00094010-000 226-00094010-001 236-245 254 8.09.27 - 9.67 12.5 22 226-00094012-000 226-00094012-001 236-245 317 9.99.27 - 9.67 15 25 226-00094015-000 226-00094015-001 236-245 381 11.69.27 - 9.67 20 35 226-00094020-000 226-00094020-001 236-245 508 16.09.27 - 9.67 25 43 226-00094025-000 226-00094025-001 236-245 635 19.99.27 - 9.67 30 52 226-00094030-000 226-00094030-001 236-245 762 23.9

8-10

9.70 - 10.10 7.5 14 226-00100007-000 226-00100007-001

225

247-256 190 6.29.70 - 10.10 10 17 226-00100010-000 226-00100010-001 247-256 254 8.09.70 - 10.10 12.5 22 226-00100012-000 226-00100012-001 247-256 317 10.29.70 - 10.10 15 26 226-00100015-000 226-00100015-001 247-256 381 12.19.70 - 10.10 20 35 226-00100020-000 226-00100020-001 247-256 508 16.09.70 - 10.10 25 44 226-00100025-000 226-00100025-001 247-256 635 20.09.70 - 10.10 30 52 226-00100030-000 226-00100030-001 247-256 762 24.0

10

10.64 - 11.04 7.5 14 226-00107507-000 226-00107507-001

250

271-280 190 6.410.64 - 11.04 10 19 226-00107510-000 226-00107510-001 271-280 254 8.710.64 - 11.04 12.5 23 226-00107512-000 226-00107512-001 271-280 317 10.610.64 - 11.04 15 27 226-00107515-000 226-00107515-001 271-280 381 12.310.64 - 11.04 20 36 226-00107520-000 226-00107520-001 271-280 508 16.510.64 - 11.04 25 45 226-00107525-000 226-00107525-001 271-280 635 20.710.64 - 11.04 30 54 226-00107530-000 226-00107530-001 271-280 762 24.9

10

11.04 - 11.44 7.5 14 226-00111007-000 226-00111007-001

250

281-290 190 6.411.04 - 11.44 10 19 226-00111010-000 226-00111010-001 281-290 254 8.611.04 - 11.44 12.5 23 226-00111012-000 226-00111012-001 281-290 317 10.511.04 - 11.44 15 28 226-00111015-000 226-00111015-001 281-290 381 12.711.04 - 11.44 20 37 226-00111020-000 226-00111020-001 281-290 508 16.811.04 - 11.44 25 46 226-00111025-000 226-00111025-001 281-290 635 21.111.04 - 11.44 30 55 226-00111030-000 226-00111030-001 281-290 762 25.3

11

Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.



MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


10

11.34 - 11.74 7.5 15 226-00114007-000 226-00114007-001

250

289-298 190 6.811.34 - 11.74 10 19 226-00114010-000 226-00114010-001 289-298 254 8.611.34 - 11.74 12.5 24 226-00114012-000 226-00114012-001 289-298 317 10.811.34 - 11.74 15 28 226-00114015-000 226-00114015-001 289-298 381 13.011.34 - 11.74 20 38 226-00114020-000 226-00114020-001 289-298 508 17.311.34 - 11.74 25 47 226-00114025-000 226-00114025-001 289-298 635 21.611.34 - 11.74 30 56 226-00114030-000 226-00114030-001 289-298 762 25.9

10

11.75 - 12.15 7.5 14 226-00117507-000 226-00117507-001

250

299-308 190 6.611.75 - 12.15 10 20 226-00117510-000 226-00117510-001 299-308 254 9.011.75 - 12.15 12.5 24 226-00117512-000 226-00117512-001 299-308 317 10.911.75 - 12.15 15 28 226-00117515-000 226-00117515-001 299-308 381 12.811.75 - 12.15 20 39 226-00117520-000 226-00117520-001 299-308 508 17.411.75 - 12.15 25 48 226-00117525-000 226-00117525-001 299-308 635 21.911.75 - 12.15 30 57 226-00117530-000 226-00117530-001 299-308 762 26.1

10-12

12.00 - 12.40 7.5 15 226-00120007-000 226-00120007-001

250-300

305-314 190 6.712.00 - 12.40 10 20 226-00120010-000 226-00120010-001 305-314 254 9.112.00 - 12.40 12.5 24 226-00120012-000 226-00120012-001 305-314 317 11.212.00 - 12.40 15 29 226-00120015-000 226-00120015-001 305-314 381 13.412.00 - 12.40 20 39 226-00120020-000 226-00120020-001 305-314 508 17.812.00 - 12.40 25 49 226-00120025-000 226-00120025-001 305-314 635 22.312.00 - 12.40 30 58 226-00120030-000 226-00120030-001 305-314 762 26.8

12

12.62 - 13.02 7.5 16 226-00127507-000 226-00127507-001

300

321-330 190 7.212.62 - 13.02 10 20 226-00127510-000 226-00127510-001 321-330 254 9.312.62 - 13.02 12.5 25 226-00127512-000 226-00127512-001 321-330 317 11.512.62 - 13.02 15 29 226-00127515-000 226-00127515-001 321-330 381 13.312.62 - 13.02 20 40 226-00127520-000 226-00127520-001 321-330 508 18.312.62 - 13.02 25 50 226-00127525-000 226-00127525-001 321-330 635 22.912.62 - 13.02 30 60 226-00127530-000 226-00127530-001 321-330 762 27.5

12

13.10 - 13.50 7.5 17 226-00132007-000 226-00132007-001

300

333-342 190 7.613.10 - 13.50 10 21 226-00132010-000 226-00132010-001 333-342 254 9.513.10 - 13.50 12.5 25 226-00132012-000 226-00132012-001 333-342 317 11.613.10 - 13.50 15 29 226-00132015-000 226-00132015-001 333-342 381 13.413.10 - 13.50 20 40 226-00132020-000 226-00132020-001 333-342 508 18.613.10 - 13.50 25 51 226-00132025-000 226-00132025-001 333-342 635 23.213.10 - 13.50 30 61 226-00132030-000 226-00132030-001 333-342 762 27.9

12

13.40 - 13.80 7.5 18 226-00134007-000 226-00134007-001

300

341-350 190 8.113.40 - 13.80 10 21 226-00134010-000 226-00134010-001 341-350 254 9.813.40 - 13.80 12.5 27 226-00134012-000 226-00134012-001 341-350 317 12.213.40 - 13.80 15 32 226-00134015-000 226-00134015-001 341-350 381 14.613.40 - 13.80 20 42 226-00134020-000 226-00134020-001 341-350 508 19.513.40 - 13.80 25 53 226-00134025-000 226-00134025-001 341-350 635 24.413.40 - 13.80 30 64 226-00134030-000 226-00134030-001 341-350 762 29.3

12-14

13.70 - 14.10 7.5 18 226-00137007-000 226-00137007-001

300-350

348-358 190 8.413.70 - 14.10 10 22 226-00137010-000 226-00137010-001 348-358 254 10.313.70 - 14.10 12.5 28 226-00137012-000 226-00137012-001 348-358 317 12.813.70 - 14.10 15 34 226-00137015-000 226-00137015-001 348-358 381 15.413.70 - 14.10 20 45 226-00137020-000 226-00137020-001 348-358 508 20.513.70 - 14.10 25 56 226-00137025-000 226-00137025-001 348-358 635 25.713.70 - 14.10 30 67 226-00137030-000 226-00137030-001 348-358 762 30.8

12-14

14.00 - 14.40 7.5 19 226-00140007-000 226-00140007-001

300-350

356-365 190 8.614.00 - 14.40 10 23 226-00140010-000 226-00140010-001 356-365 254 10.614.00 - 14.40 12.5 29 226-00140012-000 226-00140012-001 356-365 317 13.314.00 - 14.40 15 35 226-00140015-000 226-00140015-001 356-365 381 16.014.00 - 14.40 20 46 226-00140020-000 226-00140020-001 356-365 508 21.314.00 - 14.40 25 58 226-00140025-000 226-00140025-001 356-365 635 26.614.00 - 14.40 30 69 226-00140030-000 226-00140030-001 356-365 762 31.9


12

Band Width Inches Number of Bolts Bolt Sizes7.5 6 Drop-in lug

5/8" x 6"or 16mm x 152 mm

Closed lug5/8" x 6 7/8"

or 16mm x 175mm

10 812.5 1015 1220 1630 24

Smith-Blair 227 Double Band Full Circle® RepairClamps provide a fast, economical means of repairing full cir-cumferential breaks, holes, cracks or other types of damageto cast iron, steel, asbestos cement, copper, aluminum, plas-tic, fiberglass and other types of pipe.

Full Circle® Repair Clamps feature a lap type gasket withmolded tapered ends to provide efficient equalized sealing atthe lap joint on any pipe within the clamp’s range. The gaskethas a finely grided surface with the resilience to easily con-form to irregularities on rough pipe surfaces or in pitted areas,providing an effective seal all around the pipe.

A stainless steel bridge plate spans the opening of thelugs and is bonded flush into the gasket to prevent wrinklingin the lug area, providing even gasket pressure at all pointsaround the full circumference of the pipe.

The band is made of stainless steel to provide corrosionresistance, flexibility and strength. The lugs are securelyattached to the stainless steel band and have mutually sup-porting stabilizing fingers to permit maximum torquing of thebolts. The lug design includes a drop-in bolt feature that elim-inates loose parts, saves time and aids installation underadverse conditions.


227 Full Circle® Repair Clamp Double Band


superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon and many other chemicals. Nominal tempera-ture range -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.







MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


3

3.49 - 4.29 7.5 18 227-00035007-000 227-00035007-001

80-100

89-108 190 8.23.49 - 4.29 10 24 227-00035010-000 227-00035010-001 89-108 254 11.03.49 - 4.29 12.5 30 227-00035012-000 227-00035012-001 89-108 317 13.83.49 - 4.29 15 36 227-00035015-000 227-00035015-001 89-108 381 16.53.49 - 4.29 20 48 227-00035020-000 227-00035020-001 89-108 508 22.03.49 - 4.29 30 72 227-00035030-000 227-00035030-001 89-108 762 33.0

4

4.44 - 5.24 7.5 19 227-00045007-000 227-00045007-001

100

113-133 190 8.64.44 - 5.24 10 25 227-00045010-000 227-00045010-001 113-133 254 11.64.44 - 5.24 12.5 31 227-00045012-000 227-00045012-001 113-133 317 14.44.44 - 5.24 15 37 227-00045015-000 227-00045015-001 113-133 381 16.84.44 - 5.24 20 49 227-00045020-000 227-00045020-001 113-133 508 22.64.44 - 5.24 30 74 227-00045030-000 227-00045030-001 113-133 762 33.9

4

4.74 - 5.57 7.5 19 227-00048007-000 227-00048007-001

100-125

121-141 190 8.64.74 - 5.57 10 25 227-00048010-000 227-00048010-001 121-141 254 11.54.74 - 5.57 12.5 31 227-00048012-000 227-00048012-001 121-141 317 14.34.74 - 5.57 15 37 227-00048015-000 227-00048015-001 121-141 381 17.04.74 - 5.57 20 50 227-00048020-000 227-00048020-001 121-141 508 23.04.74 - 5.57 30 75 227-00048030-000 227-00048030-001 121-141 762 34.4


13

227 Full Circle® Repair Clamp Double Band



MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


6

6.62 - 7.42 7.5 20 227-00066307-000 227-00066307-001

150

169-188 190 9.26.62 - 7.42 10 27 227-00066310-000 227-00066310-001 169-188 254 12.46.62 - 7.42 12.5 33 227-00066312-000 227-00066312-001 169-188 317 15.36.62 - 7.42 15 39 227-00066315-000 227-00066315-001 169-188 381 18.06.62 - 7.42 20 53 227-00066320-000 227-00066320-001 169-188 508 24.36.62 - 7.42 30 78 227-00066330-000 227-00066330-001 169-188 762 35.9

6

6.84 - 7.64 7.5 20 227-00069007-000 227-00069007-001

150

174-194 190 9.26.84 - 7.64 10 27 227-00069010-000 227-00069010-001 174-194 254 12.46.84 - 7.64 12.5 33 227-00069012-000 227-00069012-001 174-194 317 15.36.84 - 7.64 15 39 227-00069015-000 227-00069015-001 174-194 381 18.06.84 - 7.64 20 53 227-00069020-000 227-00069020-001 174-194 508 24.46.84 - 7.64 30 79 227-00069030-000 227-00069030-001 174-194 762 36.1

8

8.62 - 9.42 7.5 22 227-00086307-000 227-00086307-001

200

219-239 190 10.08.62 - 9.42 10 29 227-00086310-000 227-00086310-001 219-239 254 13.58.62 - 9.42 12.5 35 227-00086312-000 227-00086312-001 219-239 317 16.48.62 - 9.42 15 42 227-00086315-000 227-00086315-001 219-239 381 19.58.62 - 9.42 20 56 227-00086320-000 227-00086320-001 219-239 508 25.98.62 - 9.42 30 84 227-00086330-000 227-00086330-001 219-239 762 38.9

8

8.99 - 9.79 7.5 21 227-00090507-000 227-00090507-001

200

229-248 190 10.18.99 - 9.79 10 29 227-00090510-000 227-00090510-001 229-248 254 13.78.99 - 9.79 12.5 36 227-00090512-000 227-00090512-001 229-248 317 16.88.99 - 9.79 15 42 227-00090515-000 227-00090515-001 229-248 381 19.68.99 - 9.79 20 59 227-00090520-000 227-00090520-001 229-248 508 27.18.99 - 9.79 30 86 227-00090530-000 227-00090530-001 229-248 762 39.6

10

10.75 - 11.55 10 31 227-00107510-000 227-00107510-001

250

273-293 254 14.410.75 - 11.55 15 47 227-00107515-000 227-00107515-001 273-293 381 21.810.75 - 11.55 20 63 227-00107520-000 227-00107520-001 273-293 508 29.110.75 - 11.55 30 94 227-00107530-000 227-00107530-001 273-293 762 43.6

10

11.10 - 11.90 10 33 227-00111010-000 227-00111010-001

250

282-302 254 15.411.10 - 11.90 15 47 227-00111015-000 227-00111015-001 282-302 381 21.911.10 - 11.90 20 65 227-00111020-000 227-00111020-001 282-302 508 29.911.10 - 11.90 30 97 227-00111030-000 227-00111030-001 282-302 762 44.9

10

11.04 - 12.24 10 33 227-00111010-050 227-00111010-051

250-300

280-311 254 15.411.04 - 12.24 15 47 227-00111015-050 227-00111015-051 280-311 381 21.911.04 - 12.24 20 65 227-00111020-050 227-00111020-051 280-311 508 30.011.04 - 12.24 30 97 227-00111030-050 227-00111030-051 280-311 762 45.0

10

11.60 - 12.40 10 33 227-00116010-000 227-00116010-001

250-300

295-315 254 15.511.60 - 12.40 15 47 227-00116015-000 227-00116015-001 295-315 381 22.011.60 - 12.40 20 65 227-00116020-000 227-00116020-001 295-315 508 30.311.60 - 12.40 30 98 227-00116030-000 227-00116030-001 295-315 762 45.2

12

12.75 - 13.55 10 33 227-00127510-000 227-00127510-001

300

324-344 254 15.212.75 - 13.55 15 49 227-00127515-000 227-00127515-001 324-344 381 22.812.75 - 13.55 20 65 227-00127520-000 227-00127520-001 324-344 508 29.912.75 - 13.55 30 99 227-00127530-000 227-00127530-001 324-344 762 45.5

12

13.20 - 14.00 10 34 227-00132010-000 227-00132010-001

300-350

335-356 254 15.913.20 - 14.00 15 49 227-00132015-000 227-00132015-001 335-356 381 23.013.20 - 14.00 20 65 227-00132020-000 227-00132020-001 335-356 508 30.313.20 - 14.00 30 99 227-00132030-000 227-00132030-001 335-356 762 46.0

12

13.14 - 14.34 10 34 227-00132010-050 227-00132010-051

300-350

334-364 254 15.913.14 - 14.34 15 49 227-00132015-050 227-00132015-051 334-364 381 23.013.14 - 14.34 20 65 227-00132020-050 227-00132020-051 334-364 508 30.313.14 - 14.34 30 100 227-00132030-050 227-00132030-051 334-364 762 46.0

12

13.65 - 14.45 10 35 227-00136510-000 227-00136510-001

300-350

347-367 254 15.913.65 - 14.45 15 50 227-00136515-000 227-00136515-001 347-367 381 23.013.65 - 14.45 20 68 227-00136520-000 227-00136520-001 347-367 508 31.313.65 - 14.45 30 102 227-00136530-000 227-00136530-001 347-367 762 46.9

12

13.65 - 14.85 10 34 227-00136510-050 227-00136510-051

300-350

347-377 254 15.913.65 - 14.85 15 50 227-00136515-050 227-00136515-051 347-377 381 23.013.65 - 14.85 20 65 227-00136520-050 227-00136520-051 347-377 508 30.313.65 - 14.85 30 102 227-00136530-050 227-00136530-051 347-377 762 46.0


14

Band Width Inches Number of Bolts Bolt Sizes10 8

Drop-in lug5/8" x 6"

15 1220 1630 24

Smith-Blair 228 Multiple Band Full Circle® RepairClamps provide a fast, economical means of repairing full cir-cumferential breaks, holes, cracks, or other types of damage oncast iron, steel, asbestos cement, copper, aluminum, plastic,fiberglass and other types of pipe.

The clamps have a built-in O.D. range enabling them to fitseveral pipe outside diameters within a nominal pipe sizerange.

Full Circle® Repair Clamps feature a lap type gasket withmolded tapered ends to provide efficient equalized sealing atthe lap joint. The gasket has a finely gridded surface with theresilience to easily conform to irregularities on rough pipe sur-faces or in pitted areas, providing an effective seal all aroundthe pipe.

A stainless steel bridge plate spans the opening of the lugsand is bonded flush into the gasket to prevent wrinkling in thelug area, providing even gasket pressure at all points aroundthe full circumference of the pipe.

The band is made of stainless steel to provide corrosionresistance, flexibility and strength. Lugs are securely attachedto the band and have mutually supporting stabilizing fingers.The lug design includes a drop-in bolt feature that eliminatesloose parts, saves time and aids installation under adverse con-ditions.


228 Full Circle® Repair Clamp for Large Diameter Pipe2 Band Clamps


superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon and many other chemicals. Nominal tempera-ture range -20°F to 180°F.Consult manufacturer for specific applicationsor other service temperatures.







MetricO.D.

RangeInches

WidthInches

Wt.Each Lbs.

O.D.Range

MM

WidthMM


14.38 - 15.1310 35 228-20143810-000 228-20143810-001

366-384254 16.2

15 53 228-20143815-000 228-20143815-001 381 24.320 71 228-20143820-000 228-20143820-001 508 32.430 106 228-20143830-000 228-20143830-001 762 48.6

15.07 - 15.8210 38 228-20150710-000 228-20150710-001

383-402254 17.5

15 55 228-20150715-000 228-20150715-001 381 25.320 71 228-20150720-000 228-20150720-001 508 32.730 107 228-20150730-000 228-20150730-001 762 49.0

15.92 - 16.6710 39 228-20159210-000 228-20159210-001

409-423254 17.9

15 56 228-20159215-000 228-20159215-001 381 25.520 74 228-20159220-000 228-20159220-001 508 34.030 149 228-20159230-000 228-20159230-001 762 51.1

16.56 - 17.3110 39 228-20165610-000 228-20165610-001

421-440254 18.0

15 57 228-20165615-000 228-20165615-001 381 26.120 76 228-20165620-000 228-20165620-001 508 35.130 117 228-20165630-000 228-20165630-001 762 54.0

17.15 - 17.9010 39 228-20171510-000 228-20171510-001

436-455254 18.1

15 57 228-20171515-000 228-20171515-001 381 26.320 77 228-20171520-000 228-20171520-001 508 35.330 118 228-20171530-000 228-20171530-001 762 54.5


15

Larger sizes available upon request.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.



MetricO.D.

RangeInches

WidthInches

Wt.Each Lbs.

O.D.Range

MM

WidthMM


17.82 - 18.5710 40 228-20178210-000 228-20178210-001

453-472254 18.4

15 58 228-20178215-000 228-20178215-001 381 26.720 77 228-20178220-000 228-20178220-001 508 35.630 119 228-20178230-000 228-20178230-001 762 54.8

18.46 - 19.2110 41 228-20184610-000 228-20184610-001

469-488254 19.0

15 59 228-20184615-000 228-20184615-001 381 27.020 78 228-20184620-000 228-20184620-001 508 25.930 120 228-20184630-000 228-20184630-001 762 55.2

19.23 - 19.9810 47 228-20192310-000 228-20192310-001

488-507254 21.5

15 60 228-20192315-000 228-20192315-001 381 27.620 80 228-20192320-000 228-20192320-001 508 36.830 121 228-20192330-000 228-20192330-001 762 55.6

19.90 - 20.6510 42 228-20199010-000 228-20199010-001

505-525254 19.4

15 60 228-20199015-000 228-20199015-001 381 27.720 81 228-20199020-000 228-20199020-001 508 37.030 121 228-20199030-000 228-20199030-001 762 55.8

20.70 - 21.4510 44 228-20207010-000 228-20207010-001

526-545254 20.0

15 63 228-20207015-000 228-20207015-001 381 28.820 83 228-20207020-000 228-20207020-001 508 38.430 126 228-20207030-000 228-20207030-001 762 58.0

21.52 - 22.2710 45 228-20215210-000 228-20215210-001

547-566254 20.8

15 65 228-20215215-000 228-20215215-001 381 29.920 87 228-20215220-000 228-20215220-001 508 39.830 131 228-20215230-000 228-20215230-001 762 60.2

22.12 - 22.8710 46 228-20221210-000 228-20221210-001

562-580254 21.3

15 67 228-20221215-000 228-20221215-001 381 30.720 89 228-20221220-000 228-20221220-001 508 40.930 135 228-20221230-000 228-20221230-001 762 61.9

22.90 - 23.6510 48 228-20229010-000 228-20229010-001

582-600254 22.1

15 69 228-20229015-000 228-20229015-001 381 31.820 92 228-20229020-000 228-20229020-001 508 42.330 139 228-20229030-000 228-20229030-001 762 63.9


16



MetricO.D.

RangeInches

WidthInches

Wt.Each Lbs.

O.D.Range

MM

WidthMM


23.28 - 24.3810 73 228-30232810-000 228-30232810-001

592-619254 33.32

15 105 228-30232815-000 228-30232815-001 381 47.7220 127 228-30232820-000 228-30232820-001 508 57.7930 181 228-30232830-000 228-30232830-001 762 82.17

24.38 - 25.4810 75 228-30243810-000 228-30243810-001

620-647254 34.23

15 108 228-30243815-000 228-30243815-001 381 49.1220 130 228-30243820-000 228-30243820-001 508 59.1630 185 228-30243830-000 228-30243830-001 762 84.08

25.70 - 26.8010 77 228-30257010-000 228-30257010-001

653-680254 35.14

15 109 228-30257015-000 228-30257015-001 381 49.4920 132 228-30257020-000 228-30257020-001 508 60.0630 188 228-30257030-000 228-30257030-001 762 85.44

26.48 - 27.5810 78 228-30264810-000 228-30264810-001

673-700254 35.59

15 112 228-30264815-000 228-30264815-001 381 50.8520 135 228-30264820-000 228-30264820-001 508 61.4330 191 228-30264830-000 228-30264830-001 762 86.80

27.65 - 28.7510 81 228-30276510-000 228-30276510-001

703-730254 36.96

15 116 228-30276515-000 228-30276515-001 381 52.6620 140 228-30276520-000 228-30276520-001 508 63.7030 197 228-30276530-000 228-30276530-001 762 89.53

28.73 - 29.8310 83 228-30287310-000 228-30287310-001

730-757254 37.86

15 118 228-30287315-000 228-30287315-001 381 53.5720 145 228-30287320-000 228-30287320-001 508 65.9730 201 228-30287330-000 228-30287330-001 762 91.34

29.62 - 30.7210 85 228-30296210-000 228-30296210-001

753-780254 38.77

15 121 228-30296215-000 228-30296215-001 381 54.9320 147 228-30296220-000 228-30296220-001 508 66.8730 205 228-30296230-000 228-30296230-001 762 93.16

Larger sizes available upon request.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.

Band Width Inches Number of Bolts Bolt Sizes10 12

Closed lug5/8" x 6 7/8"

15 1820 2430 36

Smith-Blair 228 Multiple Band Full Circle® RepairClamps provide a fast, economical means of repairing full cir-cumferential breaks, holes, cracks, or other types of damage oncast iron, steel, asbestos cement, copper, aluminum, plastic,fiberglass and other types of pipe.

The clamps have a built-in O.D. range enabling them to fitseveral pipe outside diameters within a nominal pipe sizerange.

Full Circle® Repair Clamps feature a lap type gasket withmolded tapered ends to provide efficient equalized sealing atthe lap joint. The gasket has a finely gridded surface with theresilience to easily conform to irregularities on rough pipe sur-faces or in pitted areas, providing an effective seal all aroundthe pipe.


The band is made of stainless steel to provide corrosionresistance, flexibility and strength. Lugs are securely attachedto the band and have mutually supporting stabilizing fingers.The lug design includes a drop-in bolt feature that eliminatesloose parts, saves time and aids installation under adverse con-ditions.









17

Smith-Blair 229 Full Circle® Collar Leak Repair Clampshave a full gasket with a double thickness of the same gasketmaterial in one half of the clamp width. This step in the gasketmaterial compensates for the differential in the outside diame-ter between the coupling or bell and provides a shoulder tocompress against the end of the coupling or bell to form aneffective seal.

Circumferential ribs on the gasket create high pressureareas which increase sealing capability and provide a firm gripon the pipe. A stainless steel bridge plate spans the opening ofthe lugs and is bonded flush into the gasket to prevent wrin-kling in the lug area, providing even gasket pressure at allpoints around the full circumference of the pipe.

The band is made of stainless steel to provide corrosionresistance, flexibility and strength. Lugs are securely attachedto the stainless steel band and have mutually supporting stabi-lizing fingers to permit maximum torquing of the bolts. The lugdesign includes a drop-in bolt feature that eliminates looseparts, saves time and aids installation under adverse condi-tions.


Band Width Inches Number of Bolts Bolt Sizes

7.5 3 5/8" x 6"

12.5 5 5/8” x 6”

Standard

Catalog Number

MetricNom.Size

Inches

O.D.Inches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.MM

WidthMM

Wt.EachKg.

2 2.38 7.5 9 229-00023807-000 50 60 190 4.12 2.38 12.5 15 229-00023812-000 50 60 318 6.8

2 1/2 2.88 7.5 10 229-00028807-000 65 70 190 4.52 1/2 2.88 12.5 17 229-00028812-000 65 70 318 7.7

3 3.50 7.5 10 229-00035007-000 80 89 190 4.53 3.50 12.5 17 229-00035012-000 80 89 318 7.7

3 1/2 4.00 7.5 10 229-00040007-000 90 102 190 4.53 1/2 4.00 12.5 17 229-00040012-000 90 102 318 7.7

4 4.50 7.5 10 229-00045007-000 100 115 190 4.54 4.50 12.5 17 229-00045012-000 100 115 318 7.75 5.56 7.5 12 229-00055607-000 125 141 190 5.45 5.56 12.5 20 229-00055612-000 125 141 318 9.16 6.63 7.5 12 229-00066307-000 150 168 190 5.46 6.63 12.5 20 229-00066312-000 150 168 318 9.18 8.63 7.5 14 229-00086307-000 200 219 190 6.48 8.63 12.5 23 229-00086312-000 200 219 318 10.6

10 10.75 7.5 15 229-00107507-000 250 273 190 6.810 10.75 12.5 25 229-00107512-000 250 273 318 11.412 12.75 7.5 16 229-00127507-000 300 324 190 7.312 12.75 12.5 27 229-00127512-000 300 324 318 12.1

*Contact Smith-Blair, Inc. engineering for specific applications.

229 Full Circle® Collar Leak Repair Clamp Single Bandfor PVC Solvent Weld Bells*







18


5/8" x 6"12.5 5

Smith-Blair 238 Single Band Tapped Full Circle®Repair Clamps provide a fast, economical means of repair-ing damaged or broken pipe at broken or torn out serviceconnections or branch lines. Repairs can be made and theservice connection or the branch line can be restored in oneoperation. The clamps can also be used for new installationsof service connections or branch lines.

The clamp’s stainless steel outlet is welded to the bandand is available with NPT, CC (AWWA) or BSP threads.

O.D. ranges for the clamp are designed to fit cast iron,asbestos cement, steel, plastic and most other types of pipe.The clamps have a built in O.D. range enabling them to fitseveral pipe outside diameters.

Full Circle® Repair Clamps feature a lap type gasket withmolded tapered ends to provide efficient equalized sealing atthe lap joint on any pipe within the clamp’s range. The gas-ket has a finely grided surface with the resilience to easilyconform to irregularities on rough pipe surfaces or in pittedareas, providing an effective seal all around the pipe.

A stainless steel bridge plate spans the opening of thelugs and is bonded flush into the gasket to prevent wrinklingin the lug area, providing even gasket pressure at all pointsaround the full circumference of the pipe. The band is madeof stainless steel to provide corrosion resistance, flexibilityand strength.

The lugs are securely attached to the band and havemutually supporting stabilizing fingers to permit maximumtorquing of the bolts. The lug design includes a drop-in boltfeature that eliminates loose parts, saves time and aidsinstallation under adverse conditions.


3/4” and 1” NPT Taps - Low Alloy Bolts and Nuts

238 Tapped Full Circle® Repair Clamp Single Band







Standard 3/4” NPT20 MM

1” NPT25 MM

MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


3 3.46-3.70 7.5 8.3 238-00035007-006 238-00035007-008 80 88-93 190 3.83.46-3.70 12.5 12.8 238-00035012-006 238-00035012-008 88-93 317 5.8

3 3.73-4.00 7.5 8.3 238-00037507-006 238-00037507-008 80 95-101 190 3.83.73-4.00 12.5 12.8 238-00037512-006 238-00037512-008 95-101 317 5.8

3 3.96-4.25 7.5 8.3 238-00040007-006 238-00040007-008 80-100 101-107 190 3.83.96-4.25 12.5 12.8 238-00040012-006 238-00040012-008 101-107 317 5.8

4 4.45-4.73 7.5 8.3 238-00045007-006 238-00045007-008 100 114-120 190 3.84.45-4.73 12.5 12.8 238-00045012-006 238-00045012-008 114-120 317 5.8

4 4.74-5.14 7.5 10.7 238-00048007-006 238-00048007-008 100 121-130 190 4.94.74-5.14 12.5 18.0 238-00048012-006 238-00048012-008 121-130 317 8.3

6 6.56-6.96 7.5 11.1 238-00066307-006 238-00066307-008 150 167-176 190 5.46.56-6.96 12.5 17.1 238-00066312-006 238-00066312-008 167-176 317 8.9

6 6.84-7.24 7.5 11.3 238-00069007-006 238-00069007-008 150 174-183 190 5.46.84-7.24 12.5 19.3 238-00069012-006 238-00069012-008 174-183 317 8.9

8 8.54-8.94 7.5 13.2 238-00086307-006 238-00086307-008 200 217-227 190 6.18.54-8.94 12.5 21.4 238-00086312-006 238-00086312-008 217-227 317 9.8

8 8.99-9.39 7.5 13.2 238-00090507-006 238-00090507-008 200 229-238 190 6.18.99-9.39 12.5 21.4 238-00090512-006 238-00090512-008 229-238 317 9.8

Maximum available clamp width is 35 inches.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.

19

3/4”, 1” and 2” CC Taps - Low Alloy Bolts and NutsStandard 3/4” CC

20 MM1” CC25 MM

2” CC50 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.Catalog Number Catalog Number Catalog Number

33.46-3.70 7.5 9 238-00035007-007 238-00035007-009 N/A

8088-93 190 4.0

3.46-3.70 10 13 238-00035010-007 238-00035010-009 N/A 88-93 254 5.93.46-3.70 12.5 16 238-00035012-007 238-00035012-009 N/A 88-93 317 7.33.46-3.70 15 18 238-00035015-007 238-00035015-009 N/A 88-93 381 8.2

33.73-4.00 7.5 9 238-00037507-007 238-00037507-009 N/A

8095-101 190 4.0

3.73-4.00 10 13 238-00037510-007 238-00037510-009 N/A 95-101 254 5.93.73-4.00 12.5 16 238-00037512-007 238-00037512-009 N/A 95-101 317 7.33.73-4.00 15 18 238-00037515-007 238-00037515-009 N/A 95-101 381 8.2

33.96-4.25 7.5 9 238-00040007-007 238-00040007-009 N/A

80101-107 190 4.0

3.96-4.25 10 13 238-00040010-007 238-00040010-009 N/A 101-107 254 5.93.96-4.25 12.5 16 238-00040012-007 238-00040012-009 N/A 101-107 317 7.33.96-4.25 15 18 238-00040015-007 238-00040015-009 N/A 101-107 381 8.2

44.45-4.73 7.5 10 238-00045007-007 238-00045007-009 238-00045007-015

100114-120 190 4.0

4.45-4.73 10 13 238-00045010-007 238-00045010-009 238-00045010-015 114-120 254 5.94.45-4.73 12.5 16 238-00045012-007 238-00045012-009 238-00045012-015 114-120 317 7.34.45-4.73 15 19 238-00045015-007 238-00045015-009 238-00045015-015 114-120 381 8.2

44.74-5.14 7.5 10 238-00048007-007 238-00048007-009 238-00048007-015

100121-130 190 5.0

4.74-5.14 10 13 238-00048010-007 238-00048010-009 238-00048010-015 121-130 254 6.84.74-5.14 12.5 16 238-00048012-007 238-00048012-009 238-00048012-015 121-130 317 8.24.74-5.14 15 19 238-00048015-007 238-00048015-009 238-00048015-015 121-130 381 9.5

66.56-6.96 7.5 12 238-00066307-007 238-00066307-009 238-00066307-015

150167-176 190 5.4

6.56-6.96 10 16 238-00066310-007 238-00066310-009 238-00066310-015 167-176 254 7.36.56-6.96 12.5 19 238-00066312-007 238-00066312-009 238-00066312-015 167-176 317 8.26.56-6.96 15 23 238-00066315-007 238-00066315-009 238-00066315-015 167-176 381 10.4

66.84-7.24 7.5 12 238-00069007-007 238-00069007-009 238-00069007-015

150174-183 190 5.4

6.84-7.24 10 16 238-00069010-007 238-00069010-009 238-00069010-015 174-183 254 7.36.84-7.24 12.5 19 238-00069012-007 238-00069012-009 238-00069012-015 174-183 317 8.26.84-7.24 15 23 238-00069015-007 238-00069015-009 238-00069015-015 174-183 381 10.4

88.54-8.94 7.5 13 238-00086307-007 238-00086307-009 238-00086307-015

200217-227 190 5.9

8.54-8.94 10 17 238-00086310-007 238-00086310-009 238-00086310-015 217-227 254 7.78.54-8.94 12.5 21 238-00086312-007 238-00086312-009 238-00086312-015 217-227 317 9.58.54-8.94 15 25 238-00086315-007 238-00086315-009 238-00086315-015 217-227 381 11.3

88.99-9.39 7.5 13 238-00090507-007 238-00090507-009 238-00090507-015

200229-238 190 5.9

8.99-9.39 10 17 238-00090510-007 238-00090510-009 238-00090510-015 229-238 254 7.7 8.99-9.39 12.5 21 238-00090512-007 238-00090512-009 238-00090512-015 229-238 317 9.58.99-9.39 15 25 238-00090515-007 238-00090515-009 238-00090515-015 229-238 381 11.3

1010.64-11.04 7.5 14 238-00107507-007 238-00107507-009 238-00107507-015

254270-280 190 6.4

10.64-11.04 10 19 238-00107510-007 238-00107510-009 238-00107510-015 270-280 254 8.210.64-11.04 12.5 23 238-00107512-007 238-00107512-009 238-00107512-015 270-280 317 10.410.64-11.04 15 27 238-00107515-007 238-00107515-009 238-00107515-015 270-280 381 12.3

1011.04-11.44 7.5 14 238-00111007-007 238-00111007-009 238-00111007-015

254280-291 190 6.4

11.04-11.44 10 19 238-00111010-007 238-00111010-009 238-00111010-015 280-291 254 8.211.04-11.44 12.5 23 238-00111012-007 238-00111012-009 238-00111012-015 280-291 317 10.411.04-11.44 15 27 238-00111015-007 238-00111015-009 238-00111015-015 280-291 381 12.3

1212.62-13.02 7.5 16 238-00127507-007 238-00127507-009 238-00127507-015

305321-331 190 7.3

12.62-13.02 10 20 238-00127510-007 238-00127510-009 238-00127510-015 321-331 254 9.112.62-13.02 12.5 25 238-00127512-007 238-00127512-009 238-00127512-015 321-331 317 11.312.62-13.02 15 29 238-00127515-007 238-00127515-009 238-00127515-015 321-331 381 13.2

1213.10-13.50 7.5 16 238-00132007-007 238-00132007-009 238-00132007-015

305333-343 190 7.7

13.10-13.50 10 20 238-00132010-007 238-00132010-009 238-00132010-015 333-343 254 9.513.10-13.50 12.5 25 238-00132012-007 238-00132012-009 238-00132012-015 333-343 317 11.313.10-13.50 15 29 238-00132015-007 238-00132015-009 238-00132015-015 333-343 381 13.2

Maximum available clamp width is 35 inches.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.Other tap sizes are available.


20

Tap Size Last 3 Digits forAlloy Bolts

Last 3 Digits forStainless Steel Bolts

3/4" NPT -006 -1061" NPT -008 -108

1 1/4"NPT -010 -1101 1/2" NPT -012 -112

2" NPT -014 -1143/4" CC -007 -1071" CC -009 -109

1 1/4” CC -011 -1111 1/2” CC -013 -113

2” CC -015 -115

1 1/4”, 1 1/2” and 2” NPT Taps--Low Alloy Bolts and Nuts

238 Full Circle® Repair Clamps with Stainless Steel BoltsChange the last three digits of the catalog number to 1--

Maximum available clamp width is 35 inches.Other sizes of Full Circle®s are available with tapped outlets.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.


Standard 1 1/4” NPT32 MM

1 1/2” NPT40 MM

2” NPT50 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


44.45-4.73 7.5 10 238-00045007-010 238-00045007-012 238-00045007-014

100114-120 190 4.1

4.45-4.73 10 13 238-00045010-010 238-00045010-012 238-00045010-014 114-120 254 5.94.45-4.73 12.5 16 238-00045012-010 238-00045012-012 238-00045012-014 114-120 317 7.34.45-4.73 15 19 238-00045015-010 238-00045015-012 238-00045015-014 114-120 381 8.6

44.74-5.14 7.5 11 238-00048007-010 238-00048007-012 238-00048007-014

100121-130 190 5.0

4.74-5.14 10 15 238-00048010-010 238-00048010-012 238-00048010-014 121-130 254 6.84.74-5.14 12.5 18 238-00048012-010 238-00048012-012 238-00048012-014 121-130 317 8.24.74-5.14 15 21 238-00048015-010 238-00048015-012 238-00048015-014 121-130 381 9.5

66.56-6.96 7.5 12 238-00066307-010 238-00066307-012 238-00066307-014

150167-176 190 5.4

6.56-6.96 10 16 238-00066310-010 238-00066310-012 238-00066310-014 167-176 254 7.36.56-6.96 12.5 19 238-00066312-010 238-00066312-012 238-00066312-014 167-176 317 8.66.56-6.96 15 23 238-00066315-010 238-00066315-012 238-00066315-014 167-176 381 11.8

66.84-7.24 7.5 12 238-00069007-010 238-00069007-012 238-00069007-014

150174-183 190 5.4

6.84-7.24 10 16 238-00069010-010 238-00069010-012 238-00069010-014 174-183 254 7.36.84-7.24 12.5 19 238-00069012-010 238-00069012-012 238-00069012-014 174-183 317 8.66.84-7.24 15 23 238-00069015-010 238-00069015-012 238-00069015-014 174-183 381 10.4

88.54-8.94 7.5 13 238-00086307-010 238-00086307-012 238-00086307-014

200217-227 190 5.9

8.54-8.94 10 17 238-00086310-010 238-00086310-012 238-00086310-014 217-227 254 7.78.54-8.94 12.5 21 238-00086312-010 238-00086312-012 238-00086312-014 217-227 317 9.58.54-8.94 15 25 238-00086315-010 238-00086315-012 238-00086315-014 217-227 381 11.30

88.99-9.39 7.5 13 238-00090507-010 238-00090507-012 238-00090507-014

200229-238 190 5.9

8.99-9.39 10 17 238-00090510-010 238-00090510-012 238-00090510-014 229-238 254 7.78.99-9.39 12.5 21 238-00090512-010 238-00090512-012 238-00090512-014 229-238 317 9.58.99-9.39 15 25 238-00090515-010 238-00090515-012 238-00090515-014 229-238 381 11.34

1010.64-11.04 7.5 14 238-00107507-010 238-00107507-012 238-00107507-014

250270-280 190 6.4

10.64-11.04 10 19 238-00107510-010 238-00107510-012 238-00107510-014 270-280 254 8.610.64-11.04 12.5 23 238-00107512-010 238-00107512-012 238-00107512-014 270-280 317 10.410.64-11.04 15 27 238-00107515-010 238-00107515-012 238-00107515-014 270-280 381 12.2

1011.04-11.44 7.5 14 238-00111007-010 238-00111007-012 238-00111007-014

250280-291 190 6.4

11.04-11.44 10 19 238-00111010-010 238-00111010-012 238-00111010-014 280-291 254 8.611.04-11.44 12.5 23 238-00111012-010 238-00111012-012 238-00111012-014 280-291 317 10.411.04-11.44 15 27 238-00111015-010 238-00111015-012 238-00111015-014 280-291 381 12.7

1212.62-13.02 7.5 16 238-00127507-010 238-00127507-012 238-00127507-014

300321-331 190 7.3

12.62-13.02 10 20 238-00127510-010 238-00127510-012 238-00127510-014 321-331 254 9.112.62-13.02 12.5 25 238-00127512-010 238-00127512-012 238-00127512-014 321-331 317 11.312.62-13.02 15 29 238-00127515-010 238-00127515-012 238-00127515-014 321-331 381 13.15

1213.10-13.50 7.5 16 238-00132007-010 238-00132007-012 238-00132007-014

300333-343 190 7.7

13.10-13.50 10 20 238-00132010-010 238-00132010-012 238-00132010-014 333-343 254 9.513.10-13.50 12.5 25 238-00132012-010 238-00132012-012 238-00132012-014 333-343 317 11.313.10-13.50 15 29 238-00132015-010 238-00132015-012 238-00132015-014 333-343 381 13.2

21

Band Width Inches # of Bolts Bolt Sizes7.5 6

Drop-in lug 5/8" x 6"Closed lug 5/8" x 6 7/8"

10 812.5 1015 12

Smith-Blair 239 Double Tapped Full Circle® RepairClamps provide a fast, economical means of repairing a dam-aged or broken pipe at broken or torn out service connectionsor branch lines. The repairs can be made and the service con-nection or branch line restored in one operation. The clampscan also be used for new installations of service connections orbranch lines.

The stainless steel outlet is welded to the band, and isavailable with NPT, CC threads or BSP (AWWA).

The double band configuration gives the clamps a greatersize range than single band clamps by allowing them to fit avariety of the types and classes of pipe in each nominal pipesize, 4 inch through 12 inch.

Full Circle® Repair Clamps feature a lap type gasket withmolded tapered ends to provide efficient equalized sealing atthe lap joint on any pipe within the clamp’s range. The gaskethas a finely gridded surface with the resilience to easily con-form to irregularities on rough pipe surfaces or pitted areas,providing an effective seal all around the pipe.


The band is made of stainless steel to provide corrosionresistance, flexibility and strength. Lugs are securely attachedto the stainless steel band, and have mutually supporting sta-bilizing fingers to permit maximum torquing of the bolts. The lugdesign includes a drop-in bolt feature that eliminates looseparts, saves time and aids installation under adverse condi-tions.



239 Tapped Full Circle® Repair Clamp Double Band









1” NPT25 MM

MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


44.44-5.24 7.5 19 239-00045007-006 239-00045007-008

100113-133 190 8.6

4.44-5.24 10 25 239-00045010-006 239-00045010-008 113-133 254 11.34.44-5.24 12.5 31 239-00045012-006 239-00045012-008 113-133 317 14.04.44-5.24 15 37 239-00045015-006 239-00045015-008 113-133 381 16.8

66.62-7.42 7.5 20 239-00066307-006 239-00066307-008

125168-188 190 9.1

6.62-7.42 10 27 239-00066310-006 239-00066310-008 168-188 254 12.26.62-7.42 12.5 33 239-00066312-006 239-00066312-008 168-188 317 15.06.62-7.42 15 39 239-00066315-006 239-00066315-008 168-188 381 17.7

66.84-7.64 7.5 20 239-00069007-006 239-00069007-008

150174-194 190 9.1

6.84-7.64 10 27 239-00069010-006 239-00069010-008 174-194 254 12.26.84-7.64 12.5 33 239-00069012-006 239-00069012-008 174-194 317 15.06.84-7.64 15 39 239-00069015-006 239-00069015-008 174-194 381 17.7

88.62-9.42 7.5 22 239-00086307-006 239-00086307-008

200219-239 190 10.0

8.62-9.42 10 30 239-00086310-006 239-00086310-008 219-239 254 13.68.62-9.42 12.5 36 239-00086312-006 239-00086312-008 219-239 317 16.38.62-9.42 15 43 239-00086315-006 239-00086315-008 219-239 381 19.5

22

3/4”, 1” and 2” CC Taps - Low Alloy Bolts and Nuts

Maximum available clamp width is 35 inches.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.Other tap sizes are available.





1” NPT25 MM

MetricNominal

SizeInches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


88.99-9.79 7.5 22 239-00090507-006 239-00090507-008

200229-248 190 10.0

8.99-9.79 10 30 239-00090510-006 239-00090510-008 229-248 254 13.68.99-9.79 12.5 36 239-00090512-006 239-00090512-008 229-248 317 16.38.99-9.79 15 43 239-00090515-006 239-00090515-008 229-248 381 19.5

1010.75-11.55 10 31 239-00107510-006 239-00107510-008

250273-293 254 14.1

10.75-11.55 12.5 40 239-00107512-006 239-00107512-008 273-293 317 18.110.75-11.55 15 48 239-00107515-006 239-00107515-008 273-293 381 21.8

1011.10-11.90 10 34 239-00111010-006 239-00111010-008

250282-302 254 15.4

11.10-11.90 12.5 43 239-00111012-006 239-00111012-008 282-302 317 19.511.10-11.90 15 48 239-00111015-006 239-00111015-008 282-302 381 21.8

1212.75-13.55 10 34 239-00127510-006 239-00127510-008

300324-344 254 15.4

12.75-13.55 12.5 43 239-00127512-006 239-00127512-008 324-344 317 19.512.75-13.55 15 50 239-00127515-006 239-00127515-008 324-344 381 22.7

1213.20-14.00 10 34 239-00132010-006 239-00132010-008

300335-355 254 15.4

13.20-14.00 12.5 43 239-00132012-006 239-00132012-008 335-355 317 19.513.20-14.00 15 50 239-00132015-006 239-00132015-008 335-355 381 22.7

Standard 3/4” CC20 MM

1” CC25 MM

2” CC50 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


44.44-5.24 7.5 19 239-00045007-007 239-00045007-009 239-00045007-015

100113-133 190 8.6

4.44-5.24 10 25 239-00045010-007 239-00045010-009 239-00045010-015 113-133 254 11.34.44-5.24 12.5 31 239-00045012-007 239-00045012-009 239-00045012-015 113-133 317 14.04.44-5.24 15 37 239-00045015-007 239-00045015-009 239-00045015-015 113-133 381 16.8

66.62-7.42 7.5 20 239-00066307-007 239-00066307-009 239-00066307-015

150169-188 190 9.1

6.62-7.42 10 27 239-00066310-007 239-00066310-009 239-00066310-015 169-188 254 12.26.62-7.42 12.5 33 239-00066312-007 239-00066312-009 239-00066312-015 169-188 317 15.06.62-7.42 15 39 239-00066315-007 239-00066315-009 239-00066315-015 169-188 381 17.7

66.84-7.64 7.5 20 239-00069007-007 239-00069007-009 239-00069007-015

150174-194 190 9.1

6.84-7.64 10 27 239-00069010-007 239-00069010-009 239-00069010-015 174-194 254 12.26.84-7.64 12.5 33 239-00069012-007 239-00069012-009 239-00069012-015 174-194 317 15.06.84-7.64 15 39 239-00069015-007 239-00069015-009 239-00069015-015 174-194 381 17.7

88.62-9.42 7.5 22 239-00086307-007 239-00086307-009 239-00086307-015

200219-239 190 10.0

8.62-9.42 10 30 239-00086310-007 239-00086310-009 239-00086310-015 219-239 254 13.68.62-9.42 12.5 36 239-00086312-007 239-00086312-009 239-00086312-015 219-239 317 16.38.62-9.42 15 43 239-00086315-007 239-00086315-009 239-00086315-015 219-239 381 19.5

88.99-9.79 7.5 22 239-00090507-007 239-00090507-009 239-00090507-015

200229-248 190 10.0

8.99-9.79 10 30 239-00090510-007 239-00090510-009 239-00090510-015 229-248 254 13.68.99-9.79 12.5 36 239-00090512-007 239-00090512-009 239-00090512-015 229-248 317 16.38.99-9.79 15 43 239-00090515-007 239-00090515-009 239-00090515-015 229-248 381 19.5

1010.75-11.55 10 31 239-00107510-007 239-00107510-009 239-00107510-015

250273-293 254 14.1

10.75-11.55 12.5 40 239-00107512-007 239-00107512-009 239-00107512-015 273-293 317 18.110.75-11.55 15 48 239-00107515-007 239-00107515-009 239-00107515-015 273-293 381 21.8

1011.10-11.90 10 31 239-00111010-007 239-00111010-009 239-00111010-015

250281-310 254 14.1

11.10-11.90 12.5 40 239-00111012-007 239-00111012-009 239-00111012-015 281-310 317 18.111.10-11.90 15 48 239-00111015-007 239-00111015-009 239-00111015-015 281-310 381 21.8

1212.75-13.55 10 34 239-00127510-007 239-00127510-009 239-00127510-015

300324-353 254 15.4

12.75-13.55 12.5 43 239-00127512-007 239-00127512-009 239-00127512-015 324-353 317 19.512.75-13.55 15 50 239-00127515-007 239-00127515-009 239-00127515-015 324-353 381 22.7

1213.20-14.00 10 34 239-00132010-007 239-00132010-009 239-00132010-015

300334-364 254 15.4

13.20-14.00 12.5 43 239-00132012-007 239-00132012-009 239-00132012-015 334-364 317 19.513.20-14.00 15 50 239-00132015-007 239-00132015-009 239-00132015-015 334-364 381 22.7

23

1 1/4”, 1 1/2” and 2” NPT Taps - Low alloy Bolts and Nuts

Maximum available clamp width is 35 inches.All sizes of Full Circle®s are available with tapped outlets.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.

239 Full Circle® Repair Clamps with Stainless Steel Bolts.Change the last three digits of the catalog number to 1--

Tap Size Last 3 Digits forAlloy Bolts

Last 3 Digits forStainless Steel Bolts

3/4" NPT -006 -1061" NPT -008 -108

1 1/4" NPT -010 -1101 1/2" NPT -012 -112

2" NPT -014 -1143/4" CC -007 -1071" CC -009 -109

1 1/4” CC -011 -1111 1/2” CC -013 -113

2" CC -015 -115


Standard 1 1/4” NPT32 MM

1 1/2” NPT40 MM

2” NPT50 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


44.44-5.24 7.5 19 239-00045007-010 239-00045007-012 239-00045007-014

100113-133 190 8.6

4.44-5.24 10 25 239-00045010-010 239-00045010-012 239-00045010-014 113-133 254 11.34.44-5.24 12.5 31 239-00045012-010 239-00045012-012 239-00045012-014 113-133 317 14.04.44-5.24 15 37 239-00045015-010 239-00045015-012 239-00045015-014 113-133 381 16.8

66.62-7.42 7.5 20 239-00066307-010 239-00066307-012 239-00066307-014

150169-188 190 9.1

6.62-7.42 10 27 239-00066310-010 239-00066310-012 239-00066310-014 169-188 254 12.26.62-7.42 12.5 33 239-00066312-010 239-00066312-012 239-00066312-014 169-188 317 15.06.62-7.42 15 39 239-00066315-010 239-00066315-012 239-00066315-014 169-188 381 17.7

66.84-7.64 7.5 20 239-00069007-010 239-00069007-012 239-00069007-014

150174-194 190 9.1

6.84-7.64 10 27 239-00069010-010 239-00069010-012 239-00069010-014 174-194 254 12.26.84-7.64 12.5 33 239-00069012-010 239-00069012-012 239-00069012-014 174-194 317 15.06.84-7.64 15 39 239-00069015-010 239-00069015-012 239-00069015-014 174-194 381 17.7

88.62-9.42 7.5 22 239-00086307-010 239-00086307-012 239-00086307-014

200219-239 190 10.0

8.62-9.42 10 30 239-00086310-010 239-00086310-012 239-00086310-014 219-239 254 13.68.62-9.42 12.5 36 239-00086312-010 239-00086312-012 239-00086312-014 219-239 317 16.38.62-9.42 15 43 239-00086315-010 239-00086315-012 239-00086315-014 219-239 381 19.5

88.99-9.79 7.5 22 239-00090507-010 239-00090507-012 239-00090507-014

200229-248 190 10.0

8.99-9.79 10 30 239-00090510-010 239-00090510-012 239-00090510-014 229-248 254 13.68.99-9.79 12.5 36 239-00090512-010 239-00090512-012 239-00090512-014 229-248 317 16.38.99-9.79 15 43 239-00090515-010 239-00090515-012 239-00090515-014 229-248 381 19.5

1010.75-11.55 10 31 239-00107510-010 239-00107510-012 239-00107510-014

250273-293 254 14.1

10.75-11.55 12.5 40 239-00107512-010 239-00107512-012 239-00107512-014 273-293 317 18.110.75-11.55 15 48 239-00107515-010 239-00107515-012 239-00107515-014 273-293 381 21.8

1011.10-11.90 10 31 239-00111010-010 239-00111010-012 239-00111010-014

250281-310 254 14.1

11.10-11.90 12.5 40 239-00111012-010 239-00111012-012 239-00111012-014 281-310 317 18.111.10-11.90 15 48 239-00111015-010 239-00111015-012 239-00111015-014 281-310 381 21.8

1212.75-13.55 10 34 239-00127510-010 239-00127510-012 239-00127510-014

300324-353 254 15.4

12.75-13.55 12.5 43 239-00127512-010 239-00127512-012 239-00127512-014 324-353 317 19.512.75-13.55 15 50 239-00127515-010 239-00127515-012 239-00127515-014 324-353 381 22.7

1213.20-14.00 10 34 239-00132010-010 239-00132010-012 239-00132010-014

300334-364 254 15.4

13.20-14.00 12.5 43 239-00132012-010 239-00132012-012 239-00132012-014 334-364 317 19.513.20-14.00 15 50 239-00132015-010 239-00132015-012 239-00132015-014 334-364 381 22.7

24

Smith-Blair 256 Full Circle® Repair Clamps aredesigned for hot soil and other aggressive environments.They provide a fast, economical means of repairing full cir-cumferential breaks and other types of damage on cast iron,asbestos cement, plastic, steel, copper, fiberglass and othertypes of pipes.

The lugs are constructed with CF cast stainless steel(type 304 equivalent) with mutually supporting stabilizing fin-gers that permit maximum torquing of the bolts. There is nowelding in the lug area so the anti-corrosion properties of thestainless steel band are fully preserved.

The Stainless Steel Recessed Armor Plate is type 304 orbetter recessed flush and bonded to the gasket ensuringeven gasket pressure at all points around the circumferenceof the pipe.

The gasket has molded tapered ends that provide full,uniform dealing at the lap joint through the full O.D. range ofthe clamp. The finely gridded surface provides a network ofseals around the damaged area and superior sealing onrough or pitted pipe.

The bands are type 304 stainless steel or better to pro-vide corrosion resistance, flexibility and strength.

The bolts and nuts are type 304 stainless steel or betterwith a double radius head and square neck design to facili-tate easy installation and maximum tightening. Courseseries rolled threads are supplied, and the stainless steelnuts and bolts are fluropolymer coated to prevent galling.


5/815 422.5 6

256 Full Circle® Repair Clamp All Stainless Steel, Cast LugsSingle Band

Material SpecificationsBand: Stainless Steel Type 304Lugs: CF8 austenetic cast stainless steel (304

Equivalent)Gasket: Nitrile (Buna N) compounded to produce


Bridge Plate: Type 304 stainless steel recessed flush and bonded into gasket.

Bolts: Type 304 Stainless Steel with rolled threads, fluoropolymer coated to prevent galling.



Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

2 2.35-2.63 7.5 7 256-00023807-000 50 60-66 190 3.02.35-2.63 15 13 256-00023815-000 60-66 381 6.0

2 1/4-2 1/2 2.70-3.00 7.5 7 256-00027507-000 65 69-76 190 3.02.70-3.00 15 13 256-00027515-000 69-76 381 6.0

3 2.97-3.25 7.5 7 256-00030007-000 80 75-82 190 2.72.97.3.25 15 14 256-00030015-000 75-82 381 6.5

3 3.46-3.70 7.5 8 256-00035007-000 80 88-93 190 3.73.46-3.70 15 16 256-00035015-000 88-93 381 7.4

3-4 3.73-4.00 7.5 8 256-00037507-000 80-100 95-101 190 3.73.73-4.00 15 16 256-00037515-000 95-101 381 7.5

4 3.96-4.25 7.5 8 256-00040007-000 100 101-107 190 3.73.96-4.25 15 19 256-00040015-000 101-107 381 7.8

4 4.45-4.73 7.5 8 256-00045007-000 100 114-120 190 3.74.45-4.73 15 17 256-00045015-000 114-120 381 8.0

44.74-5.14 7.5 9 256-00048007-000

100121-130 190 4.0

4.74-5.14 15 18 256-00048015-000 121-130 381 8.24.74-5.14 22.5 27 256-00048022-000 121-130 572 12.3

4-54.95-5.35 7.5 9 256-00050007-000

125126-135 190 4.0

4.95-5.35 15 18 256-00050015-000 126-135 381 8.24.95-5.35 22.5 27 256-00050022-000 126-135 572 12.3

4-55.22-5.62 7.5 9 256-00052507-000

125133-142 190 4.0

5.22-5.62 15 18 256-00052515-000 133-142 381 8.25.22-5.62 22.5 27 256-00052522-000 133-142 572 12.3

66.56-6.96 7.5 9 256-00066307-000

150167-176 190 4.2

6.56-6.96 15 18 256-00066315-000 167-176 381 8.56.56-6.96 22.5 28 256-00066322-000 167-176 572 12.7


25


Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

66.84-7.24 7.5 10 256-00069007-000

150174-183 190 4.6

6.84-7.24 15 20 256-00069015-000 174-183 381 9.16.84-7.24 22.5 30 256-00069022-000 174-183 572 13.76.84-7.24 30 40 256-00069030-000 174-183 762 18.2

67.05-7.45 7.5 10 256-00071007-000

150180-189 190 4.6

7.05-7.45 15 20 256-00071015-000 180-189 381 9.17.05-7.45 22.5 30 256-00071022-000 180-189 572 13.7

67.45-7.85 7.5 10 256-00074507-000

150190-199 190 4.6

7.45-7.85 15 20 256-00074515-000 190-199 381 9.17.45-7.85 22.5 30 256-00074522-000 190-199 572 13.7

88.54-8.94 7.5 13 256-00086307-000

200217-227 190 5.8

8.54-8.94 15 25 256-00086315-000 217-227 381 11.38.54-8.94 22.5 37 256-00086322-000 217-227 572 17.0

88.99-9.39 7.5 13 256-00090507-000

200229-238 190 5.8

8.99-9.39 15 25 256-00090515-000 229-238 381 11.38.99-9.39 22.5 37 256-00090522-000 229-238 572 17.0

89.27-9.67 7.5 13 256-00094007-000

200236-245 190 5.8

9.27-9.67 15 25 256-00094015-000 236-245 381 11.39.27-9.67 22.5 37 256-00094022-000 236-245 572 17.0

1010.64-11.04 7.5 12 256-00107507-000

250271-280 190 5.9

10.64-11.04 15 25 256-00107515-000 271-280 381 11.710.64-11.04 22.5 39 256-00107522-000 271-280 572 17.6

1011.04-11.44 7.5 13 256-00111007-000

250281-290 190 6.3

11.04-11.44 15 27 256-00111015-000 281-290 381 12.611.04-11.44 22.5 41 256-00111022-000 281-290 572 18.9

1011.34-11.74 7.5 14 256-00114007-000

250289-298 190 6.3

11.34-11.74 15 27 256-00114015-000 289-298 381 12.611.34-11.74 22.5 42 256-00114022-000 289-298 572 18.9

1011.75-12.15 7.5 14 256-00117507-000

250299-308 190 6.3

11.75-12.15 15 27 256-00117515-000 299-308 381 18.911.75-12.15 22.5 42 256-00117522-000 299-308 572 18.9

1212.62-13.02 7.5 14 256-00127507-000

300321-330 190 6.8

12.62-13.02 15 29 256-00127515-000 321-330 381 13.512.62-13.02 22.5 44 256-00127522-000 321-330 572 20.3

1213.10-13.50 7.5 14 256-00132007-000

300333-342 190 6.8

13.10-13.50 15 29 256-00132015-000 333-342 381 13.513.10-13.50 22.5 44 256-00132022-000 333-342 572 20.3

1213.40-13.80 7.5 15 256-00134007-000

300341-350 190 6.8

13.40-13.80 15 30 256-00134015-000 341-350 381 13.513.40-13.80 22.5 45 256-00134022-000 341-350 572 20.3

1213.70-14.10 7.5 16 256-00137007-000

300348-358 190 7.2

13.70-14.10 15 32 256-00137015-000 348-358 381 14.413.70-14.10 22.5 48 256-00137022-000 348-358 572 21.7

1214.00-14.40 7.5 15 256-00140007-000

300356-365 190 7.2

14.00-14.40 15 31 256-00140015-000 356-365 381 14.414.00-14.40 22.5 47 256-00140022-000 356-365 572 21.7

256 Full Circle® Repair Clamp All Stainless Steel, Cast LugsSingle Band

With more than 100 years of combined leadership in the design and development of pipeline products, Smith-Blair engineers have produced the ideal solution for soil conditions requiring a stainless steel clamp.

The efficient design of “the cool clamp for hot soil” combines superior strength and corrosion resistance withtime-proven Full Circle® Repair Clamp features and benefits, to provide leak resistant seals on all types of pipe.

26


5/8" x 6”16mm x 152mm15 4

22.5 6

Smith-Blair 257 Full Circle® Repair Clamps aredesigned for hot soil and other aggressive environments.They provide a fast, economical means of repairing full cir-cumferential breaks and other types of damage on cast iron,asbestos cement, plastic, steel, copper, fiberglass and othertypes of pipes.

Each clamp will connect or repair a variety of types andclasses of pipe in each nominal size 4” through 12”.

The lugs have mutually supporting fingers to permit max-imum torquing of the bolts. The gasket is a lap type with mold-ed tapered ends and a finely gridded surface to conform toirregularities on the pipe surface. The bridge plate is moldedflush into the gasket to prevent wrinkling in the lug area andto ensure uniform full circumferential sealing. The bolts andnuts are Type 304 stainless steel and are coated to preventgalling.

257 Full Circle® Repair Clamp All Stainless Steel, Cast LugsDouble Band

Material SpecificationsBand: Stainless Steel Type 304Lugs: CF8 austenetic cast stainless steel (304

Equivalent)Gasket: Nitrile (Buna N) compounded to produce


Bridge Plate: Type 304 stainless steel recessed flush and bonded into gasket.

Bolts: Type 304 Stainless Steel with rolled threads, fluoropolymer coated to prevent galling.



Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

44.74-5.54 7.5 15 257-00048007-000

100121-141 190 6.9

4.74-5.54 15 29 257-00048015-000 121-141 381 13.74.74-5.54 22.5 45 257-00048022-000 121-141 572 20.6

66.84-7.64 7.5 16 257-00069007-000

150174-194 190 7.4

6.84-7.64 15 32 257-00069015-000 174-194 381 14.76.84-7.64 22.5 48 257-00069022-000 174-194 572 22.1

88.99-9.79 7.5 20 257-00090507-000

200229-248 190 9.2

8.99-9.79 15 40 257-00090515-000 229-248 381 18.38.99-9.79 22.5 61 257-00090522-000 229-248 572 27.5

1011.04-11.84 7.5 22 257-00111007-000

250281-310 190 10.1

11.04-11.84 15 44 257-00111015-000 281-310 381 20.211.04-11.84 22.5 67 257-00111022-000 281-310 572 30.2

1011.60-12.40 7.5 44 257-00116007-000

250295-314 190 10.1

11.60-12.40 15 44 257-00116015-000 295-314 381 20.211.60-12.40 22.5 67 257-00116022-000 295-314 572 30.2

1213.14-13.94 7.5 23 257-00132007-000

300334-364 190 10.5

13.14-13.94 15 46 257-00132015-000 334-364 381 21.113.14-13.94 22.5 70 257-00132022-000 334-364 572 31.6

1213.65-14.45 7.5 24 257-00136507-000

300347-372 190 11.0

13.65-14.45 15 48 257-00136515-000 347-372 381 22.013.65-14.45 22.5 73 257-00136522-000 347-372 572 33.0

Larger sizes available on request.Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the clamp.

27

Smith-Blair Single Band Full Circle® All StainlessSteel Repair Clamps are an effective and economical meansfor fast, long lasting repair to virtually any type of damagedpipe up to 12” in diameter.

The combination of premium grades of stainless steelsused in Smith-Blair Clamp Couplings brings a degree of corro-sion resistance to the marketplace never before available atpopular prices.

261 Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsSingle Band

Material SpecificationsBand: Stainless Steel Type 304Lugs: Stainless Steel Type 304Keeper Bars: Stainless Steel Type 304.Gasket: Nitrile (Buna N) compounded to produce


Bridge Plate: Stainless steel recessed flush and bond-ed into gasket.

Stud Bolts: Type 304 Stainless Steel epoxy coated. & Nuts: Nuts fluoropolymer coated to prevent

galling.Also available in metric sizes


Band Width Inches Number of Studs Stud Sizes7.5 2

5/8" X 7"or

16mm x 178mm

10 312.5 315 420 525 830 10

Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

22.35-2.63 7.5 5 261-00023807-000

5060-67 190 2.1

2.35-2.63 10 6 261-00023810-000 60-67 254 2.92.35-2.63 12.5 8 261-00023812-000 60-67 317 3.52.35-2.63 15 9 261-00023815-000 60-67 381 4.3

2 1/4-2 1/22.70-3.00 7.5 5 261-00027507-000

6570-77 190 2.1

2.70-3.00 10 6 261-00027510-000 70-77 254 2.92.70-3.00 12.5 8 261-00027512-000 70-77 317 3.52.70-3.00 15 9 261-00027515-000 70-77 381 4.3

32.97-3.25 7.5 5 261-00030007-000

6576-83 190 2.2

2.97-3.25 10 6 261-00030010-000 76-83 254 2.92.97-3.25 12.5 8 261-00030012-000 76-83 317 3.62.97-3.25 15 10 261-00030015-000 76-83 381 4.4

33.46-3.70 7.5 5 261-00035007-000

8088-93 190 2.2

3.46-3.70 10 7 261-00035010-000 88-93 254 3.03.46-3.70 12.5 8 261-00035012-000 88-93 317 3.73.46-3.70 15 10 261-00035015-000 88-93 381 4.5

3-43.73-4.00 7.5 4 261-00037507-000

80-10095-101 190 2.3

3.73-4.00 10 7 261-00037510-000 95-101 254 3.13.73-4.00 12.5 9 261-00037512-000 95-101 317 3.93.73-4.00 15 10 261-00037515-000 95-101 381 4.6

3-43.96-4.25 7.5 4 261-00040007-000

80-100101-107 190 2.4

3.96-4.25 10 7 261-00040010-000 101-107 254 3.13.96-4.25 12.5 9 261-00040012-000 101-107 317 4.03.96-4.25 15 10 261-00040015-000 101-107 381 4.7

44.45-4.73 7.5 6 261-00045007-000

100114-124 190 2.5

4.45-4.73 10 7 261-00045010-000 114-124 254 3.34.45-4.73 12.5 9 261-00045012-000 114-124 317 4.24.45-4.73 15 11 261-00045015-000 114-124 381 5.0

4

4.74-5.14 7.5 6 261-00048007-000

100

120-131 190 2.94.74-5.14 10 8 261-00048010-000 120-131 254 3.84.74-5.14 12.5 11 261-00048012-000 120-131 317 4.84.74-5.14 15 13 261-00048015-000 120-131 381 5.74.74-5.14 20 17 261-00048020-000 120-131 508 7.6

4-5

4.95-5.35 7.5 6 261-00050007-000

125

126-135 190 2.94.95-5.35 10 8 261-00050010-000 126-135 254 3.84.95-5.35 12.5 11 261-00050012-000 126-135 317 4.84.95-5.35 15 13 261-00050015-000 126-135 381 5.74.95-5.35 20 17 261-00050020-000 126-135 508 7.6

28


Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

4-5

5.22-5.62 7.5 7 261-00052507-000

125

132-143 190 3.05.22-5.62 10 9 261-00052510-000 132-143 254 4.05.22-5.62 12.5 11 261-00052512-000 132-143 317 5.05.22-5.62 15 14 261-00052515-000 132-143 381 6.05.22-5.62 20 18 261-00052520-000 132-143 508 8.0

6

5.95-6.35 7.5 6 261-00060007-000

125

151-161 190 3.15.95-6.35 10 9 261-00060010-000 151-161 254 4.25.95-6.35 12.5 12 261-00060012-000 151-161 317 5.25.95-6.35 15 13 261-00060015-000 151-161 381 6.35.95-6.35 20 18 261-00060020-000 151-161 508 8.4

6

6.56-6.96 7.5 6 261-00066307-000

150

167-177 190 3.36.56-6.96 10 10 261-00066310-000 167-177 254 4.46.56-6.96 12.5 12 261-00066312-000 167-177 317 5.56.56-6.96 15 15 261-00066315-000 167-177 381 6.66.56-6.96 20 20 261-00066320-000 167-177 508 8.96.56-6.96 25 24 261-00066325-000 167-177 635 11.16.56-6.96 30 29 261-00066330-000 167-177 762 13.3

6

6.84-7.24 7.5 7 261-00069007-000

150

174-184 190 3.36.84-7.24 10 10 261-00069010-000 174-184 254 4.46.84-7.24 12.5 12 261-00069012-000 174-184 317 5.56.84-7.24 15 15 261-00069015-000 174-184 381 6.66.84-7.24 20 20 261-00069020-000 174-184 508 8.96.84-7.24 25 24 261-00069025-000 174-184 635 11.16.84-7.24 30 29 261-00069030-000 174-184 762 13.3

6

7.05-7.45 7.5 7 261-00071007-000

150

180-189 190 3.47.05-7.45 10 10 261-00071010-000 180-189 254 4.57.05-7.45 12.5 12 261-00071012-000 180-189 317 5.67.05-7.45 15 15 261-00071015-000 180-189 381 6.77.05-7.45 20 20 261-00071020-000 180-189 508 8.97.05-7.45 25 25 261-00071025-000 180-189 635 11.27.05-7.45 30 30 261-00071030-000 180-189 762 13.4

6

7.45-7.85 7.5 7 261-00074507-000

150

190-199 190 3.57.45-7.85 10 10 261-00074510-000 190-199 254 4.77.45-7.85 12.5 13 261-00074512-000 190-199 317 5.97.45-7.85 15 16 261-00074515-000 190-199 381 7.17.45-7.85 20 21 261-00074520-000 190-199 508 9.47.45-7.85 25 25 261-00074525-000 190-199 635 11.87.45-7.85 30 31 261-00074530-000 190-199 762 14.2

8

7.95-8.35 7.5 8 261-00080007-000

200

202-212 190 3.77.95-8.35 10 11 261-00080010-000 202-212 254 5.07.95-8.35 12.5 13 261-00080012-000 202-212 317 6.27.95-8.35 15 16 261-00080015-000 202-212 381 7.57.95-8.35 20 22 261-00080020-000 202-212 508 9.97.95-8.35 25 27 261-00080025-000 202-212 635 12.47.95-8.35 30 33 261-00080030-000 202-212 762 14.9

8

8.54-8.94 7.5 9 261-00086307-000

200

217-227 190 3.98.54-8.94 10 11 261-00086310-000 217-227 254 5.18.54-8.94 12.5 14 261-00086312-000 217-227 317 6.58.54-8.94 15 17 261-00086315-000 217-227 381 7.78.54-8.94 20 23 261-00086320-000 217-227 508 10.38.54-8.94 25 28 261-00086325-000 217-227 635 12.98.54-8.94 30 34 261-00086330-000 217-227 762 15.4

8

8.99-9.39 7.5 9 261-00090507-000

200

228-239 190 4.08.99-9.39 10 12 261-00090510-000 228-239 254 5.38.99-9.39 12.5 15 261-00090512-000 228-239 317 6.68.99-9.39 15 17 261-00090515-000 228-239 381 7.98.99-9.39 20 23 261-00090520-000 228-239 508 10.58.99-9.39 25 29 261-00090525-000 228-239 635 13.28.99-9.39 30 35 261-00090530-000 228-239 762 15.8

8

9.27-9.67 7.5 9 261-00094007-000

200

236-245 190 4.09.27-9.67 10 12 261-00094010-000 236-245 254 5.39.27-9.67 12.5 16 261-00094012-000 236-245 317 6.79.27-9.67 15 18 261-00094015-000 236-245 381 8.09.27-9.67 20 24 261-00094020-000 236-245 508 10.79.27-9.67 25 29 261-00094025-000 236-245 635 13.2

29

Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

8 9.27-9.67 30 35 261-00094030-000 200 236-245 762 16.0

8-10

9.70-10.10 7.5 9 261-00100007-000

225

247-256 190 4.29.70-10.10 10 12 261-00100010-000 247-256 254 5.69.70-10.10 12.5 16 261-00100012-000 247-256 317 7.09.70-10.10 15 19 261-00100015-000 247-256 381 8.49.70-10.10 20 25 261-00100020-000 247-256 508 11.39.70-10.10 25 31 261-00100025-000 247-256 635 14.19.70-10.10 30 37 261-00100030-000 247-256 762 16.9

10

10.64-11.04 7.5 10 261-00107507-000

250

270-280 190 4.510.64-11.04 10 13 261-00107510-000 270-280 254 6.010.64-11.04 12.5 16 261-00107512-000 270-280 317 7.410.64-11.04 15 19 261-00107515-000 270-280 381 8.910.64-11.04 20 24 261-00107520-000 270-280 508 11.910.64-11.04 25 33 261-00107525-000 270-280 635 14.810.64-11.04 30 39 261-00107530-000 270-280 762 17.8

10

11.04-11.44 7.5 10 261-00111007-000

250

280-291 190 4.511.04-11.44 10 13 261-00111010-000 280-291 254 6.011.04-11.44 12.5 17 261-00111012-000 280-291 317 7.511.04-11.44 15 20 261-00111015-000 280-291 381 9.011.04-11.44 20 26 261-00111020-000 280-291 508 12.011.04-11.44 25 33 261-00111025-000 280-291 635 15.011.04-11.44 30 40 261-00111030-000 280-291 762 18.0

10

11.34-11.74 7.5 10 261-00114007-000

250

288-299 190 4.611.34-11.74 10 14 261-00114010-000 288-299 254 6.211.34-11.74 12.5 17 261-00114012-000 288-299 317 7.711.34-11.74 15 20 261-00114015-000 288-299 381 9.311.34-11.74 20 27 261-00114020-000 288-299 508 12.411.34-11.74 25 35 261-00114025-000 288-299 635 15.711.34-11.74 30 42 261-00114030-000 288-299 762 18.5

10

11.75-12.15 7.5 10 261-00117507-000

250

298-309 190 4.711.75-12.15 10 14 261-00117510-000 298-309 254 6.311.75-12.15 12.5 17 261-00117512-000 298-309 317 7.911.75-12.15 15 21 261-00117515-000 298-309 381 9.411.75-12.15 20 28 261-00117520-000 298-309 508 12.611.75-12.15 25 35 261-00117525-000 298-309 635 15.711.75-12.15 30 42 261-00117530-000 298-309 762 18.8

10-12

12.00-12.40 7.5 11 261-00120007-000

250-300

305-315 190 4.812.00-12.40 10 14 261-00120010-000 305-315 254 6.412.00-12.40 12.5 18 261-00120012-000 305-315 317 8.012.00-12.40 15 21 261-00120015-000 305-315 381 9.512.00-12.40 20 28 261-00120020-000 305-315 508 12.712.00-12.40 25 35 261-00120025-000 305-315 635 15.912.00-12.40 30 42 261-00120030-000 305-315 762 19.1

12

12.62-13.02 7.5 11 261-00127507-000

300

321-331 190 5.012.62-13.02 10 15 261-00127510-000 321-331 254 6.712.62-13.02 12.5 18 261-00127512-000 321-331 317 8.312.62-13.02 15 22 261-00127515-000 321-331 381 10.012.62-13.02 20 29 261-00127520-000 321-331 508 13.312.62-13.02 25 37 261-00127525-000 321-331 635 16.612.62-13.02 30 45 261-00127530-000 321-331 762 19.9

12

13.10-13.50 7.5 11 261-00132007-000

300

333-343 190 5.113.10-13.50 10 15 261-00132010-000 333-343 254 6.813.10-13.50 12.5 19 261-00132012-000 333-343 317 8.513.10-13.50 15 22 261-00132015-000 333-343 381 10.213.10-13.50 20 29 261-00132020-000 333-343 508 13.613.10-13.50 25 37 261-00132025-000 333-343 635 17.013.10-13.50 30 45 261-00132030-000 333-343 762 20.3

12

13.40-13.80 7.5 11 261-00134007-000

300

340-351 190 5.113.40-13.80 10 15 261-00134010-000 340-351 254 6.913.40-13.80 12.5 18 261-00134012-000 340-351 317 8.513.40-13.80 15 23 261-00134015-000 340-351 381 10.313.40-13.80 20 30 261-00134020-000 340-351 508 13.713.40-13.80 25 38 261-00134025-000 340-351 635 17.113.40-13.80 30 45 261-00134030-000 340-351 762 20.5


30

Smith-Blair’s 262 Double Band Full Circle® AllStainless Steel Repair Clamp’s configuration offers the advan-tage of greater size range over single band clamps. Each clamphas the capability to fit a wide variety of types and classes ofpipe within a nominal pipe size, thus reducing stocking require-ments.

262 Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsDouble Band


superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon and many other chemicals. Nominal temperaturerange -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.

Bridge Plate: Stainless steel recessed flush and bondedinto gasket.

Stud Bolts Type 304 Stainless Steel epoxy coated. & Nuts: Nuts fluoropolymer coated to prevent




5/8" X 7"or

16mm x 178mm

10 612.5 615 820 10

Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

3

3.49-4.29 7.5 8 262-00035007-000

80

88-110 190 4.13.49-4.29 10 12 262-00035010-000 88-110 254 5.43.49-4.29 12.5 15 262-00035012-000 88-110 317 6.83.49-4.29 15 18 262-00035015-000 88-110 381 8.23.49-4.29 20 24 262-00035020-000 88-110 508 10.9

4

4.44-5.24 7.5 9 262-00045007-000

100

113-133 190 4.34.44-5.24 10 13 262-00045010-000 113-133 254 5.74.44-5.24 12.5 16 262-00045012-000 113-133 317 7.14.44-5.24 15 19 262-00045015-000 113-133 381 8.54.44-5.24 20 25 262-00045020-000 113-133 508 11.4

4

4.74-5.57 7.5 10 262-00048007-000

100

121-141 190 4.54.74-5.57 10 13 262-00048010-000 121-141 254 5.94.74-5.57 12.5 16 262-00048012-000 121-141 317 7.44.74-5.57 15 20 262-00048015-000 121-141 381 8.94.74-5.57 20 26 262-00048020-000 121-141 508 11.8

6

6.62-7.42 7.5 10 262-00066307-000

150

168-189 190 4.96.62-7.42 10 14 262-00066310-000 168-189 254 6.56.62-7.42 12.5 18 262-00066312-000 168-189 317 8.26.62-7.42 15 22 262-00066315-000 168-189 381 9.86.62-7.42 20 29 262-00066320-000 168-189 508 13.1

6

6.84-7.64 7.5 10 262-00069007-000

150

174-194 190 4.96.84-7.64 10 15 262-00069010-000 174-194 254 6.66.84-7.64 12.5 18 262-00069012-000 174-194 317 8.36.84-7.64 15 22 262-00069015-000 174-194 381 9.96.84-7.64 20 29 262-00069020-000 174-194 508 13.2

8

8.62-9.42 7.5 13 262-00086307-000

200

219-239 190 5.78.62-9.42 10 17 262-00086310-000 219-239 254 7.68.62-9.42 12.5 21 262-00086312-000 219-239 317 9.48.62-9.42 15 25 262-00086315-000 219-239 381 11.38.62-9.42 20 34 262-00086320-000 219-239 508 15.1

8

8.99-9.79 7.5 13 262-00090507-000

200

229-248 190 5.98.99-9.79 10 16 262-00090510-000 229-248 254 7.98.99-9.79 12.5 22 262-00090512-000 229-248 317 9.98.99-9.79 15 26 262-00090515-000 229-248 381 11.88.99-9.79 20 35 262-00090520-000 229-248 508 15.8

1010.75-11.55 10 21 262-00107510-000

250273-293 254 9.4

10.75-11.55 15 31 262-00107515-000 273-293 381 14.110.75-11.55 20 41 262-00107520-000 273-293 508 18.8

31

Standard

Catalog Number

MetricNom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

1011.10-11.90 10 21 262-00111010-000

250282-302 254 9.5

11.10-11.90 15 31 262-00111015-000 282-302 381 14.211.10-11.90 20 42 262-00111020-000 282-302 508 19.0

1011.60-12.40 10 21 262-00116010-000

250295-315 254 9.6

11.60-12.40 15 32 262-00116015-000 295-315 381 14.411.60-12.40 20 42 262-00116020-000 295-315 508 19.2

1212.75-13.55 10 23 262-00127510-000

300325-344 254 10.4

12.75-13.55 15 35 262-00127515-000 325-344 381 15.712.75-13.55 20 46 262-00127520-000 325-344 508 20.9

1213.20-14.00 10 23 262-00132010-000

300335-355 254 10.5

13.20-14.00 15 35 262-00132015-000 335-355 381 15.813.20-14.00 20 46 262-00132020-000 335-355 508 21.1

1213.65-14.45 10 24 262-00136510-000

300347-367 254 10.7

13.65-14.45 15 35 262-00136515-000 347-367 381 16.013.65-14.45 20 47 262-00136520-000 347-367 508 21.3

1214.00-14.80 10 25 262-00140010-000

300357-376 254 11.4

14.00-14.80 15 38 262-00140015-000 357-376 381 17.114.00-14.80 20 50 262-00140020-000 357-376 508 22.8

262 Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsDouble Band

269 Full Circle® Collar Leak Clamp All Stainless Steel, Fabricated LugsSingle Band


superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon and many other chemicals. Nominal temperature range -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.





Band Width Inches Number of Studs Stud Sizes7.5 2 5/8" x 7"

Smith-Blair® 269 All Stainless Steel FullCircle®® Leak Repair Clamps are furnished 7 1/2 incheswide to fit 2 inch through 12 inch steel pipe size PVC pipe.

The gasket is double thick in one half of the clampwidth, providing a step to compensate for the differential inO.D. between the coupling or the bell and the pipe wall, aswell as providing a shoulder to seal against the end of thecoupling or bell.

Nom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Catalog NumberNom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

2 2.38 7.5 5 269-00023807-000 50 60-67 190 2.32.5 2.88 7.5 5 269-00028807-000 65 70-77 190 2.33 3.50 7.5 5 269-00035007-000 80 88-93 190 2.3

3.5 4.00 7.5 6 269-00040007-000 90 101-107 190 2.74 4.50 7.5 6 269-00045007-000 100 114-124 190 2.75 5.56 7.5 7 269-00055607-000 125 132-143 190 3.26 6.63 7.5 8 269-00066307-000 150 167-177 190 3.68 8.63 7.5 9 269-00086307-000 200 217-227 190 4.1

10 10.75 7.5 10 269-00107507-000 250 273-280 190 4.512 12.75 7.5 11 269-00127507-000 300 323-330 190 5.0

32

Smith-Blair’s 263 Multi-Band Full Circle® All StainlessSteel Repair Clamp’s increases the range capability of eachclamp when compared to single band and double bandclamps. Their band design is engineered to provide consistentgasket pressure around the full circumference of the pipe forgreater sealing capability on large diameter pipe. They aredesigned for use on 10” nominal size and larger pipe.

Band Width Inches Number of Studs Stud Sizes10 9

5/8" x 7"15 1220 1530 30

263 Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsMulti-Band







Standard

Catalog Number

MetricO.D.

RangeInches

Width Inches

Wt.EachLbs.

O.D.Range

MM

WidthMM

Wt.EachKg.

11.04-12.24 10 21 263-00111010-000 280-311 254 9.611.04-12.24 15 34 263-00111015-000 280-311 381 15.411.04-12.24 20 47 263-00111020-000 280-311 508 21.311.04-12.24 30 74 263-00111030-000 280-311 762 33.613.14-14.34 10 24 263-00132010-000 334-364 254 10.913.14-14.34 15 35 263-00132015-000 334-364 381 15.913.14-14.34 20 49 263-00132020-000 334-364 508 22.213.14-14.34 30 76 263-00132030-000 334-364 762 34.513.65-14.85 10 27 263-00136510-000 347-377 254 12.313.65-14.85 15 36 263-00136515-000 347-377 381 16.313.65-14.85 20 50 263-00136520-000 347-377 508 22.713.65-14.85 30 78 263-00136530-000 347-377 762 35.414.85-16.05 10 30 263-00148510-000 377-408 254 13.614.85-16.05 15 41 263-00148515-000 377-408 381 18.614.85-16.05 20 53 263-00148520-000 377-408 508 24.014.85-16.05 30 80 263-00148530-000 377-408 762 36.315.92-17.12 10 30 263-00159210-000 405-435 254 14.115.92-17.12 15 41 263-00159215-000 405-435 381 18.615.92-17.12 20 53 263-00159220-000 405-435 508 24.015.92-17.12 30 80 263-00159230-000 405-435 762 36.317.15-18.35 10 31 263-00171510-000 436-466 254 14.117.15-18.35 15 43 263-00171515-000 436-466 381 19.517.15-18.35 20 53 263-00171520-000 436-466 508 24.017.15-18.35 30 80 263-00171530-000 436-466 762 36.318.46-19.66 10 31 263-00184610-000 469-499 254 14.118.46-19.66 15 45 263-00184615-000 469-499 381 20.418.46-19.66 20 53 263-00184620-000 469-499 508 24.018.46-19.66 30 81 263-00184630-000 469-499 762 36.719.45-20.65 10 34 263-00194510-000 494-524 254 15.419.45-20.65 15 46 263-00194515-000 494-524 381 20.919.45-20.65 20 56 263-00194520-000 494-524 508 25.419.45-20.65 30 81 263-00194530-000 494-524 762 36.721.52-22.72 10 34 263-00215210-000 547-577 254 15.421.52-22.72 15 48 263-00215215-000 547-577 381 21.821.52-22.72 20 59 263-00215220-000 547-577 508 26.821.52-22.72 30 84 263-00215230-000 547-577 762 38.1

33

Smith-Blair 264 Single Band Tapped Full Circle® AllStainless Steel Repair Clamps provide the same economical,easy to install characteristics of standard single band clamps,but they also have the capability to repair a damaged or brokenpipe at torn-out or broken service connections or branch lines.Repairs can be made and service connections or branch linesrestored in one operation. The clamps can also be used for newinstallations, new service connections or new branch lines.

The clamps stainless steel outlet is welded to the band,and is available with NPT, CC (AWWA) or BSP threads.

O.D. ranges are designed to fit cast iron, asbestos cement,steel, plastic and most other types of pipe. The clamps have abuilt-in O.D. range that enables each clamp to fit several pipeoutside diameters on pipe from 3” to 8” nominal size.

Standard

Catalog Number

MetricO.D.

RangeInches

Width Inches

Wt.EachLbs.

O.D.Range

MM

WidthMM

Wt.EachKg.

22.80-24.00 10 36 263-00228010-000 579-610 254 16.322.80-24.00 15 52 263-00228015-000 579-610 381 23.122.80-24.00 20 62 263-00228020-000 579-610 508 28.122.80-24.00 30 88 263-00228030-000 579-610 762 39.924.38-25.58 10 42 263-00243810-000 620-647 254 19.124.38-25.58 15 60 263-00243815-000 620-647 381 27.224.38-25.58 20 73 263-00243820-000 620-647 508 33.124.38-25.58 30 104 263-00243830-000 620-647 762 47.225.70-26.90 10 43 263-00257010-000 653-683 254 19.525.70-26.90 15 62 263-00257015-000 653-683 381 28.125.70-26.90 20 74 263-00257020-000 653-683 508 33.625.70-26.90 30 106 263-00257030-000 653-683 762 48.1

263 Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsMulti-Band

264 Tapped Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsSingle Band








5/8" x 7"10 312.5 315 5

3/4” and 1” NPT and CC Taps Standard 3/4" NPT

20 MM3/4" CC20 MM

1" NPT25 MM

1" CC25 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.

CatalogNumber

CatalogNumber

CatalogNumber

CatalogNumber

33.46-3.70 7.5 5 264-35007-006 264-35007-007 264-35007-008 264-35007-009

8088-93 190 2.3

3.46-3.70 10 7 264-35010-006 264-35010-007 264-35010-008 264-35010-009 88-93 254 3.23.46-3.70 12.5 8 264-35012-006 264-35012-007 264-35012-008 264-35012-009 88-93 317 3.63.46-3.70 15 10 264-35015-006 264-35015-007 264-35015-008 264-35015-009 88-93 381 4.5

33.73-4.00 7.5 5 264-37507-006 264-37507-007 264-37507-008 264-37507-009

8095-101 190 2.3

3.73-4.00 10 7 264-37510-006 264-37510-007 264-37510-008 264-37510-009 95-101 254 3.23.73-4.00 12.5 9 264-37512-006 264-37512-007 264-37512-008 264-37512-009 95-101 317 4.13.73-4.00 15 10 264-37515-006 264-37515-007 264-37515-008 264-37515-009 95-101 381 4.5

34

1 1/4” thru 2” NPT and CC Taps

264 Tapped Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsSingle Band

Standard 3/4" NPT20 MM

3/4" CC20 MM

1" NPT25 MM

1" CC25 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM

Wt.EachKg.Catalog Number Catalog Number Catalog Number Catalog Number

43.96-4.25 7.5 5 264-40007-006 264-40007-007 264-40007-008 264-40007-009

100101-107 190 2.3

3.96-4.25 10 7 264-40010-006 264-40010-007 264-40010-008 264-40010-009 101-107 254 3.23.96-4.25 12.5 9 264-40012-006 264-40012-007 264-40012-008 264-40012-009 101-107 317 4.13.96-4.25 15 10 264-40015-006 264-40015-007 264-40015-008 264-40015-009 101-107 381 4.5

44.45-4.73 7.5 6 264-45007-006 264-45007-007 264-45007-008 264-45007-009

100114-124 190 2.7

4.45-4.73 10 7 264-45010-006 264-45010-007 264-45010-008 264-45010-009 114-124 254 3.24.45-4.73 12.5 9 264-45012-006 264-45012-007 264-45012-008 264-45012-009 114-124 317 4.14.45-4.73 15 11 264-45015-006 264-45015-007 264-45015-008 264-45015-009 114-124 381 5.0

44.74-5.14 7.5 6 264-48007-006 264-48007-007 264-48007-008 264-48007-009

100120-131 190 2.7

4.74-5.14 10 8 264-48010-006 264-48010-007 264-48010-008 264-48010-009 120-131 254 3.64.74-5.14 12.5 11 264-48012-006 264-48012-007 264-48012-008 264-48012-009 120-131 317 5.04.74-5.14 15 13 264-48015-006 264-48015-007 264-48015-008 264-48015-009 120-131 381 5.9

66.56-6.96 7.5 7 264-66307-006 264-66307-007 264-66307-008 264-66307-009

150167-177 190 3.2

6.56-6.96 10 10 264-66310-006 264-66310-007 264-66310-008 264-66310-009 167-177 254 4.56.56-6.96 12.5 12 264-66312-006 264-66312-007 264-66312-008 264-66312-009 167-177 317 5.46.56-6.96 15 15 264-66315-006 264-66315-007 264-66315-008 264-66315-009 167-177 381 6.8

66.84-7.24 7.5 7 264-69007-006 264-69007-007 264-69007-008 264-69007-009

150174-184 190 3.2

6.84-7.24 10 10 264-69010-006 264-69010-007 264-69010-008 264-69010-009 174-184 254 4.56.84-7.24 12.5 12 264-69012-006 264-69012-007 264-69012-008 264-69012-009 174-184 317 5.46.84-7.24 15 15 264-69015-006 264-69015-007 264-69015-008 264-69015-009 174-184 381 6.8

88.54-8.94 7.5 9 264-86307-006 264-86307-007 264-86307-008 264-86307-009

200217-227 190 4.1

8.54-8.94 10 11 264-86310-006 264-86310-007 264-86310-008 264-86310-009 217-227 254 5.08.54-8.94 12.5 14 264-86312-006 264-86312-007 264-86312-008 264-86312-009 217-227 317 6.48.54-8.94 15 17 264-86315-006 264-86315-007 264-86315-008 264-86315-009 217-227 381 7.7

88.99-9.39 7.5 9 264-90507-006 264-90507-007 264-90507-008 264-90507-009

200225-239 190 4.1

8.99-9.39 10 12 264-90510-006 264-90510-007 264-90510-008 264-90510-009 225-239 254 5.48.99-9.39 12.5 15 264-90512-006 264-90512-007 264-90512-008 264-90512-009 225-239 317 6.88.99-9.39 15 17 264-90515-006 264-90515-007 264-90515-008 264-90515-009 225-239 381 7.7

3/4” and 1” NPT and CC Taps

Standard 1 1/4" NPT32 MM

1 1/2" NPT32 MM

2" NPT50 MM

2" CC50 MM

MetricNom.Size

Inches

O.D.RangeInches

WidthInches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


44.45-4.73 7.5 6 264-45007-010 264-45007-012 264-45007-014 264-45007-015

100114-124 190 2.7

4.45-4.73 10 7 264-45010-010 264-45010-012 264-45010-014 264-45010-015 114-124 254 3.24.45-4.73 12.5 9 264-45012-010 264-45012-012 264-45012-014 264-45012-015 114-124 317 4.14.45-4.73 15 11 264-45015-010 264-45015-012 264-45015-014 264-45015-015 114-124 381 5.0

44.74-5.14 7.5 6 264-48007-010 264-48007-012 264-48007-014 264-48007-015

100120-131 190 2.7

4.74-5.14 10 8 264-48010-010 264-48010-012 264-48010-014 264-48010-015 120-131 254 3.64.74-5.14 12.5 11 264-48012-010 264-48012-012 264-48012-014 264-48012-015 120-131 317 5.04.74-5.14 15 13 264-48015-010 264-48015-012 264-48015-014 264-48015-015 120-131 381 5.9

66.56-6.96 7.5 7 264-66307-010 264-66307-012 264-66307-014 264-66307-015

150167-177 190 3.2

6.56-6.96 10 10 264-66310-010 264-66310-012 264-66310-014 264-66310-015 167-177 254 4.56.56-6.96 12..5 12 264-66312-010 264-66312-012 264-66312-014 264-66312-015 167-177 317 5.46.56-6.96 15 15 264-66315-010 264-66315-012 264-66315-014 264-66315-015 167-177 381 6.8

66.84-7.24 7.5 7 264-69007-010 264-69007-012 264-69007-014 264-69007-015

150174-184 190 3.2

6.84-7.24 10 10 264-69010-010 264-69010-012 264-69010-014 264-69010-015 174-184 254 4.56.84-7.24 12.5 12 264-69012-010 264-69012-012 264-69012-014 264-69012-015 174-184 317 5.46.84-7.24 15 15 264-69015-010 264-69015-012 264-69015-014 264-69015-015 174-184 381 6.8

88.54-8.94 7.5 9 264-86307-010 264-86307-012 264-86307-014 264-86307-015

200217-227 190 4.1

8.54-8.94 10 11 264-86310-010 264-86310-012 264-86310-014 264-86310-015 217-227 254 5.08.54-8.94 12.5 14 264-86312-010 264-86312-012 264-86312-014 264-86312-015 217-227 317 6.48.54-8.94 15 17 264-86315-010 264-86315-012 264-86315-014 264-86315-015 217-227 381 7.7

88.99-9.39 7.5 9 264-90507-010 264-90507-012 264-90507-014 264-90507-015

200225-239 190 4.1

8.99-9.39 10 12 264-90510-010 264-90510-012 264-90510-014 264-90510-015 225-239 254 5.48.99-9.39 12.5 15 264-90512-010 264-90512-012 264-90512-014 264-90512-015 225-239 317 6.88.99-9.39 15 17 264-90515-010 264-90515-012 264-90515-014 264-90515-015 225-239 381 7.7

35


5/8" x 7"10 612.5 615 8

Smith-Blair 265 Double Band Tapped Full Circle®All Stainless Steel Repair Clamps. The double band config-uration of these clamps offers the advantage of greater sizerange over single band clamps. Each clamp has the capabilityto fit a wide variety of types and classes of pipe within a nomi-nal pipe size, thus reducing stocking requirements. Of course,they provide the added capability of repairing damaged or bro-ken service connections or branch lines. Repairs can be madeand service connections or branch lines restored in one opera-tion. They can also be used for new installations of service con-nections or branch lines. They are designed for use on pipefrom 4” to 12” nominal size.

Available through 30” widths.

3/4” and 1” NPT and CC taps







265 Tapped Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsDouble Band

Standard 3/4" NPT20 MM

3/4" CC20 MM

1" NPT25 MM

1" CC25 MM

Metric

Nom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


4

4.44-5.24 7.5 11 265-045007-006 265-045007-007 265-045007-008 265-045007-009

100113-133 190 4.5

4.44-5.24 10 13 265-045010-006 265-045010-007 265-045010-008 265-045010-009 113-133 254 5.94.44-5.24 12.5 16 265-045012-006 265-045012-007 265-045012-008 265-045012-009 113-133 317 7.34.44-5.24 15 19 265-045015-006 265-045015-007 265-045015-008 265-045015-009 113-133 381 8.6

6

6.62-7.42 7.5 12 265-066307-006 265-066307-007 265-066307-008 265-066307-009

150168-189 190 5.4

6.62-7.42 10 16 265-066310-006 265-066310-007 265-066310-008 265-066310-009 168-189 254 7.36.62-7.42 12.5 19 265-066312-006 265-066312-007 265-066312-008 265-066312-009 168-189 317 8.66.62-7.42 15 23 265-066315-006 265-066315-007 265-066315-008 265-066315-009 168-189 381 10.4

6

6.84-7.64 7.5 12 265-069007-006 265-069007-007 265-069007-008 265-069007-009

150174-194 190 5.4

6.84-7.64 10 16 265-069010-006 265-069010-007 265-069010-008 265-069010-009 174-194 254 7.36.84-7.64 12.5 19 265-069012-006 265-069012-007 265-069012-008 265-069012-009 174-194 317 8.66.84-7.64 15 23 265-069015-006 265-069015-007 265-069015-008 265-069015-009 174-194 381 10.4

8

8.62-9.42 7.5 13 265-086307-006 265-086307-007 265-086307-008 265-086307-009

200219-239 190 5.9

8.62-9.42 10 17 265-086310-006 265-086310-007 265-086310-008 265-086310-009 219-239 254 7.78.62-9.42 12.5 21 265-086312-006 265-086312-007 265-086312-008 265-086312-009 219-239 317 9.58.62-9.42 15 25 265-086315-006 265-086315-007 265-086315-008 265-086315-009 219-239 381 11.3

8

8.99-9.79 7.5 17 265-090507-006 265-090507-007 265-090507-008 265-090507-009

200229-248 190 7.7

8.99-9.79 10 21 265-090510-006 265-090510-007 265-090510-008 265-090510-009 229-248 254 9.58.99-9.79 12.5 25 265-090512-006 265-090512-007 265-090512-008 265-090512-009 229-248 317 11.38.99-9.79 15 26 265-090515-006 265-090515-007 265-090515-008 265-090515-009 229-248 381 11.8

1010.75-11.55 10 23 265-107510-006 265-107510-007 265-107510-008 265-107510-009

250273-293 254 10.4

10.75-11.55 12.5 27 265-107512-006 265-107512-007 265-107512-008 265-107512-009 273-293 317 12.210.75-11.55 15 33 265-107515-006 265-107515-007 265-107515-008 265-107515-009 273-293 381 15.0

1011.10-11.90 10 23 265-111010-006 265-111010-007 265-111010-008 265-111010-009

250282-302 254 10.4

11.10-11.90 12.5 28 265-111012-006 265-111012-007 265-111012-008 265-111012-009 282-302 317 12.711.10-11.90 15 34 265-111015-006 265-111015-007 265-111015-008 265-111015-009 282-302 381 15.4

1212.75-13.55 10 25 265-127510-006 265-127510-007 265-127510-008 265-127510-009

300324-344 254 11.3

12.75-13.55 12.5 29 265-127512-006 265-127512-007 265-127512-008 265-127512-009 324-344 317 13.212.75-13.55 15 37 265-127515-006 265-127515-007 265-127515-008 265-127515-009 324-344 381 16.8

1213.20-14.00 10 25 265-132010-006 265-132010-007 265-132010-008 265-132010-009

300335-355 254 11.3

13.20-14.00 12.5 29 265-132012-006 265-132012-007 265-132012-008 265-132012-009 335-355 317 13.213.20-14.00 15 37 265-132015-006 265-132015-007 265-132015-008 265-132015-009 335-355 381 17.7

36

1 1/4”, 1 1/2” and 2” NPT Taps and 2” CC Taps

Other Full Circle® Repair Clamps are available with tapped outlets.

265 Tapped Full Circle® Repair Clamp All Stainless Steel, Fabricated LugsDouble Band

Standard 1 1/4" NPT32 MM

1 1/2" NPT38 MM

2" NPT50 MM

2" CC50 MM

Metric

Nom.Size

Inches

O.D.RangeInches

Width Inches

Wt.EachLbs.

Nom.SizeMM

O.D.Range

MM

WidthMM


4

4.44-5.24 7.5 10 265-045007-010 265-045007-012 265-045007-014 265-045007-015

100

113-133 190 4.54.44-5.24 10 13 265-045010-010 265-045010-012 265-045010-014 265-045010-015 113-133 254 5.94.44-5.24 12.5 16 265-045012-010 265-045012-012 265-045012-014 265-045012-015 113-133 317 7.34.44-5.24 15 19 265-045015-010 265-045015-012 265-045015-014 265-045015-015 113-133 381 8.6

6

6.62-7.42 7.5 12 265-066307-010 265-066307-012 265-066307-014 265-066307-015

150

168-189 190 5.46.62-7.42 10 16 265-066310-010 265-066310-012 265-066310-014 265-066310-015 168-189 254 7.36.62-7.42 12.5 19 265-066312-010 265-066312-012 265-066312-014 265-066312-015 168-189 317 8.66.62-7.42 15 23 265-066315-010 265-066315-012 265-066315-014 265-066315-015 168-189 381 10.4

6

6.84-7.64 7.5 12 265-069007-010 265-069007-012 265-069007-014 265-069007-015

150

174-194 190 5.46.84-7.64 10 16 265-069010-010 265-069010-012 265-069010-014 265-069010-015 174-194 254 7.36.84-7.64 12.5 19 265-069012-010 265-069012-012 265-069012-014 265-069012-015 174-194 317 8.66.84-7.64 15 23 265-069015-010 265-069015-012 265-069015-014 265-069015-015 174-194 381 10.4

8

8.62-9.42 7.5 13 265-086307-010 265-086307-012 265-086307-014 265-086307-015

200

219-239 190 5.98.62-9.42 10 17 265-086310-010 265-086310-012 265-086310-014 265-086310-015 219-239 254 7.78.62-9.42 12.5 21 265-086312-010 265-086312-012 265-086312-014 265-086312-015 219-239 317 9.58.62-9.42 15 25 265-086315-010 265-086315-012 265-086315-014 265-086315-015 219-239 381 11.3

8

8.99-9.79 7.5 17 265-090507-010 265-090507-012 265-090507-014 265-090507-015

200

229-248 190 7.78.99-9.79 10 21 265-090510-010 265-090510-012 265-090510-014 265-090510-015 229-248 254 9.58.99-9.79 12.5 25 265-090512-010 265-090512-012 265-090512-014 265-090512-015 229-248 317 11.38.99-9.79 15 26 265-090515-010 265-090515-012 265-090515-014 265-090515-015 229-248 381 11.8

1010.75-11.55 10 23 265-107510-010 265-107510-012 265-107510-014 265-107510-015

250273-293 254 10.4

10.75-11.55 12.5 27 265-107512-010 265-107512-012 265-107512-014 265-107512-015 273-293 317 12.210.75-11.55 15 33 265-107515-010 265-107515-012 265-107515-014 265-107515-015 273-293 381 15.0

1011.10-11.90 10 23 265-111010-010 265-111010-012 265-111010-014 265-111010-015

250282-302 254 10.4

11.10-11.90 12.5 28 265-111012-010 265-111012-012 265-111012-014 265-111012-015 282-302 317 12.711.10-11.90 15 34 265-111015-010 265-111015-012 265-111015-014 265-111015-015 282-302 381 15.4

1212.75-13.55 10 25 265-127510-010 265-127510-012 265-127510-014 265-127510-015

300324-344 254 11.3

12.75-13.55 12.5 29 265-127512-010 265-127512-012 265-127512-014 265-127512-015 324-344 317 13.212.75-13.55 15 37 265-127515-010 265-127515-012 265-127515-014 265-127515-015 324-344 381 16.8

1213.20-14.00 10 25 265-132010-010 265-132010-012 265-132010-014 265-132010-015

300335-355 254 11.3

13.20-14.00 12.5 29 265-132012-010 265-132012-012 265-132012-014 265-132012-015 335-355 317 13.213.20-14.00 15 37 265-132015-010 265-132015-012 265-132015-014 265-132015-015 335-355 381 17.7

37

268

267 & 268-100

Provides a fast, economical means of repairing breaks,holes, cracks or other types of damage to cast iron, steel andother types of rigid pipe at higher pressures.

A lap type gasket with molded tapered ends provides efficientequalized sealing at the lap joint on any pipe within theclamps’ range. The gasket has a finely gridded surface withthe resilience to easily conform to irregularities on rough pipesurfaces or in pitted areas, providing an effective seal allaround the pipe.

Both styles are designed with two sections or more of heavywelded carbon or stainless steel that bolt together on the pipemaking it easy to assemble over the break area or toassemble off to the side of the repair area and then slide over

the damaged area. A stainless steel bridge plate spans the opening of the lugs

and is bonded flush into the gasket to prevent wrinkling in thelug area, providing even gasket pressure at all points aroundthe full circumference of the pipe.

Carbon steel (267) or 304 stainless steel (268) body, select-ed to meet the necessary corrosion resistance, flexibility andstrength requirements for higher pressure applications.

The 267 style clamp has feed-through lugs like the Smith-Blair 632/622 Tapping Sleeve, while the 268 style clamp haslugs similar to the 266/261 style Smith-Blair Full Circle®.Both give the structural strength required to handle higherpressures.

Size O.D. Inches WorkingPressure

4.50-14.25 30015.30-25.80 200

for Water Service

When ordering, customer must identify size, type, condition of pipe and working pressure.

267 Material SpecificationsBody: Carbon steel ASTM A 285 Grade A or ASTM

A283 Grade C. Optional: All 304 Stainless Steel.

Gasket: Nitrile (Buna N) compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon and many other chemicals.Nominal temperature range -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.

Bolts High strength low alloy steel with heavy & Nuts: semi-finished hexagon nuts to ASTM A-307

(ANSI A21.11) standards. Optional-type 304 stainless steel bolts. Stainless steel nuts are fluoropolymer coated to prevent galling.

Finish: Fusion bonded Flexi-Coat® epoxy, coated to an average 12 mil thickness.


267 & 268 Higher Pressure Full Circle® RepairClamps 4”-24” Nominal, Standard (larger sizes available upon request)Multi-Band

268 Material SpecificationsBody: Full circumference band. 18-8 type 304

stainless steel.Gasket: Nitrile (Buna N) compounded to produce


Bolts 18-8 type 304 stainless steel heavy hex nuts, & Nuts: stud bolts & washers. Nuts and studs are

fluoropolymer coated to prevent galling.Material specifications are subject to change.

Features and Benefits:

WARNING: Not to be used to couple pipe or repair full breaks.

38

Nom.Size

Inches

O.D.RangeInches

267Catalog Number

Carbon Steel BodyRemovable Bolts

WidthInches

Est.Wt.

EachLbs.

268Catalog Number

Stainless Steel BodyRemovable Bolts

WidthInches

Est.Wt.

EachLbs.

268Catalog Number

Stainless Steel BodyNon-Removable Bolts

WidthInches

Est.Wt.

EachLbs.

4 4.46-4.86 267-00048012-000 12 23 268-00048012-100 12 23 268-00048015-000 15 216 6.59-6.99 267-00066312-000 12 41 268-00066312-100 12 41 268-00066315-000 15 36

6.84-7.30 267-00069012-000 12 42 268-00069012-100 12 42 268-00069015-000 15 368-10 7.90-8.30 267-00080012-000 12 47 268-00080012-100 12 47 268-00080015-000 15 418-10 8.62-9.06 267-00086312-000 12 48 268-00086312-100 12 48 268-00086315-000 15 41

8.62-9.06 267-00086316-000 16 64 268-00086316-100 16 64 268-00086320-000 20 578-10 8.99-9.45 267-00090512-000 12 48 268-00090512-100 12 48 268-00090515-000 15 42

8.99-9.45 267-00090516-000 16 65 268-00090516-100 16 65 268-00090520-000 20 588-10 9.20-9.60 267-00094512-000 12 48 268-00094512-100 12 48 268-00094515-000 15 42

9.20-9.60 267-00094516-000 16 65 268-00094516-100 16 65 268-00094520-000 20 588-10 9.60-10.00 267-00096512-000 12 48 268-00096512-100 12 48 268-00096515-000 15 43

9.60-10.00 267-00096516-000 16 65 268-00096516-100 16 65 268-00096520-000 20 5810-12 9.90-10.30 267-00100012-000 12 50 268-00100012-100 12 50 268-00100015-000 15 47

9.90-10.30 267-00100016-000 16 67 268-00100016-100 16 67 268-00100020-000 20 60

10-1210.73-11.13 267-00107512-000 12 50 268-00107512-100 12 50 268-00107515-000 15 4710.73-11.13 267-00107516-000 16 67 268-00107516-100 16 67 268-00107520-000 20 6210.73-11.13 267-00107520-000 20 83 268-00107520-100 20 83 268-00107525-000 25 77

10-1211.05-11.45 267-00111012-000 12 56 268-00111012-100 12 56 268-00111015-000 15 5111.05-11.45 267-00111016-000 16 70 268-00111016-100 16 70 268-00111020-000 20 6511.05-11.45 267-00111020-000 20 89 268-00111020-100 20 89 268-00111025-000 25 80

10-1211.70-12.10 267-00117512-000 12 60 268-00117512-100 12 60 268-00117515-000 15 5511.70-12.10 267-00117516-000 16 80 268-00117516-100 16 80 268-00117520-000 20 7511.70-12.10 267-00117520-000 20 100 268-00117520-100 20 100 268-00117525-000 25 91

12-1412.00-12.40 267-00120012-000 12 60 268-00120012-100 12 60 268-00120015-000 15 5512.00-12.40 267-00120016-000 16 80 268-00120016-100 16 80 268-00120020-000 20 7512.00-12.40 267-00120020-000 20 100 268-00120020-100 20 100 268-00120025-000 25 91

12-1412.50-12.90 267-00127512-000 12 62 268-00127512-100 12 62 268-00127515-000 15 5712.50-12.90 267-00127516-000 16 82 268-00127516-100 16 82 268-00127520-000 20 7712.50-12.90 267-00127520-000 20 102 268-00127520-100 20 102 268-00127525-000 25 93

12-1413.16-13.56 267-00132012-000 12 63 268-00132012-100 12 63 268-00132015-000 15 5813.16-13.56 267-00132016-000 16 83 268-00132016-100 16 83 268-00132020-000 20 7813.16-13.56 267-00132020-000 20 103 268-00132020-100 20 103 268-00132025-000 25 94

12-1413.60-14.09 267-00138212-000 12 64 268-00138212-100 12 64 268-00138215-000 15 5913.60-14.09 267-00138216-000 16 84 268-00138216-100 16 84 268-00138220-000 20 7913.60-14.09 267-00138220-000 20 104 268-00138220-100 20 104 268-00138225-000 25 95

12-1414.10-14.58 267-00142512-000 12 65 268-00142512-100 12 65 268-00142515-000 15 6014.10-14.58 267-00142516-000 16 86 268-00142516-100 16 86 268-00142520-000 20 8114.10-14.58 267-00142520-000 20 107 268-00142520-100 20 107 268-00142525-000 25 98

14-1615.30-15.80 267-00153012-000 12 68 268-00153012-100 12 68 268-00153015-000 15 6315.30-15.80 267-00153016-000 16 91 268-00153016-100 16 91 268-00153020-000 20 8615.30-15.80 267-00153020-000 20 113 268-00153020-100 20 113 268-00153025-000 25 104

14-1615.80-16.30 267-00160012-000 12 70 268-00160012-100 12 70 268-00160015-000 15 6515.80-16.30 267-00160016-000 16 93 268-00160016-100 16 93 268-00160020-000 20 8815.80-16.30 267-00160020-000 20 116 268-00160020-100 20 116 268-00160025-000 25 107

14-1616.40-16.80 267-00164012-000 12 71 268-00164012-100 12 71 268-00164015-000 15 5616.40-16.80 267-00164016-000 16 94 268-00164016-100 16 94 268-00164020-000 20 8916.40-16.80 267-00164020-000 20 17 268-00164020-100 20 117 268-00164025-000 25 108

16-1817.40-17.80 267-00174012-000 12 74 268-00174012-100 12 74 268-00174015-000 15 7117.40-17.80 267-00174016-000 16 96 268-00174016-100 16 96 268-00174020-000 20 9117.40-17.80 267-00174020-000 20 119 268-00174020-100 20 119 268-00174025-000 25 110

16-1818.60-19.20 267-00187012-000 12 76 268-00187012-100 12 76 268-00187015-000 15 7318.60-19.20 267-00187016-000 16 96 268-00187016-100 16 96 268-00187020-000 20 9318.60-19.20 267-00187020-000 20 121 268-00187020-100 20 121 268-00187025-000 25 112

18-2019.50-20.10 267-00195012-000 12 78 268-00195012-100 12 78 268-00195015-000 15 7519.50-20.10 267-00195016-000 16 100 268-00195016-100 16 100 268-00195020-000 20 9719.50-20.10 267-00195020-000 20 125 268-00195020-100 20 125 268-00195025-000 25 116

18-2020.90-21.59 267-00209012-000 12 80 268-00209012-100 12 80 268-00209015-000 15 7720.90-21.59 267-00209016-000 16 105 268-00209016-100 16 105 268-00209020-000 20 10220.90-21.59 267-00209020-000 20 130 268-00209020-100 25 130 268-00209025-000 25 121

267 & 268 Heavy Duty Full Circle® Repair Clamps 4”-24” Nominal (larger sizes available upon request)Multi-Band

*Weights are estimated.

39

Helpful Hints Selecting the Proper Full Circle® Repair Clamp:

Determine the exact outside diameter (OD) of pipe to be repaired.Select the type of clamp (single band, super range, etc.) andmaterials of construction (SS Lugs, DI Lug, SS Bolts, Alloy Bolts).Select the clamp that has an OD range that includes the OD sizeof the pipe to be repaired.The width of the clamp should be sufficient to provide at least 3” ofclamp on solid pipe on each side of the break or damaged area onpipes12” or smaller. On solid pipes larger than 12”, the clampshould provide at least 4” of clamp on each side of the break ordamaged area.

Useful Installation Tips:Always clean the pipe as thoroughly as possible.Place a reference mark on the pipe. After completing the installation, this can be used to check the clamp for proper position overthe break or damaged area.Lubricating the pipe with water, soap solution or other suitablelubricant helps to overcome friction and allows proper seating of the gasket.Cleaning and lubricating the bolt threads will reduce friction andpermit greater torque transfer to the lugs.Leaving sufficient pressure on the line to keep water flowing willassist in preventing foreign matter or contaminant's from enteringthe pipeline.A Full Circle® Repair Clamp can be assembled loosely alongsidethe break and slid over the break if the pipe is well lubricated.Allowing the water level to rise above the pipe will minimize spray-ing water. Full Circle® Repair Clamps can be installed quickly andeasily under water.Completely tightening the centermost bolt(s) first will usually stopspraying water.Drilling a small hole at each end of a crack in the pipe will usuallyrelieve stresses and prevent the crack from spreading.

Improvising Larger O.D. Clamps:To fill an emergency need for a large O.D. clamp when noneare available, smaller clamps can be joined together to make amultiple band large clamp.1. Determine exact O.D. of the pipe to be repaired.2. Select two or three smaller clamps of sizes where their

combined O.D. ranges equal the correct O.D. range fit ofthe damaged pipe.Example:Pipe to be repaired to 20” cast iron 21.60” O.D.Use 3 each 6” clamps 6.84-7.24 O.D. range

6.84-7.246.84-7.246.84-7.2420.52-21.72 Improvised Clamp O.D. Range

3. It is not necessary to use clamps of the same size, but they should be as close in size as possible.

4. The bridge plate molded into the gasket has a pre-formedcurvature for each size range to facilitate installation. Toensure proper sealing, the bridge plates must bestraightened before installation.

To order clamps not listed in the catalog or for special applications,the following information is required:

__ Type of clamp (regular or all stainless)__ Pipe outside diameter (O.D.)__ Line Pressures__ Line Contents__ Type of damage (hole, beam break, crack, etc.)__ Extent of damage (size of hole, length or crack, etc.)__ Type of pipeline (above ground, buried, underwater

etc.)__ Environment (aggressive soil, sand, salt water, etc.)__ Tap size and type (NPT or CC) if tapped clamp

coupling is needed.

Nom.Size

Inches

O.D.RangeInches

Catalog Number267

Carbon SteelBody

Removable Bolts

WidthInches

*Est.Wt.

EachLbs.

Catalog Number268

Stainless Steel BodyRemovable Bolts

WidthInches

*Est.Wt.

EachLbs.

Catalog Number 268

Stainless Steel BodyNon-Removable

Bolts

WidthInches

*Est.Wt.

EachLbs.

2021.60-22.40 267-00216012-000 12 83 268-00216012-100 12 83 268-00216015-000 15 8021.60-22.40 267-00216016-000 16 109 268-00216016-100 16 109 268-00216020-000 20 10621.60-22.40 267-00216020-000 20 132 268-00216020-100 20 132 268-00216025-000 25 123

2423.50-24.20 267-00235012-000 12 86 268-00235012-100 12 86 268-00235015-000 15 8323.50-24.20 267-00235016-000 16 115 268-00235016-100 16 115 268-00235020-000 20 11223.50-24.20 267-00235020-000 20 140 268-00235020-100 20 140 268-00235025-000 25 131

24-2625.80-26.60 267-00258012-000 12 89 268-00258012-100 12 89 268-00258015-000 15 8625.80-26.60 267-00258016-000 16 119 268-00258016-100 16 119 268-00258020-000 20 11625.80-26.60 267-00258020-000 20 147 268-00258020-100 20 147 268-00258025-000 25 138

*Weights are estimated.

267 & 268 Heavy Duty Full Circle® Repair Clamps 4”-24” Nominal (larger sizes available upon request)Multi-Band

WARNING THESE PRODUCTS DO NOT RESTRAIN AXIAL PIPE

OR PRODUCTMOVEMENT !

40

The technical performance data, specifications and instal-lation recommendations in this brochure are intended as a ref-erence for the utilization of Smith-Blair Clamps by pipingdesigners, installers and owners, and maintenance personnel.

Many situations have special conditions requiring theexpertise of qualified personnel who must make the decisionsregarding application. The material presented here is notintended as a substitute for professional assistance.Pressures, temperatures and other performance standardsstated herein should never be exceeded.

Effort has been made to insure the accuracy of this materi-al. Smith-Blair makes no express or implied warranties regard-ing the information or materials contained in this bulletin.Anyone making use of this information assumes all liabilityresulting from such use.

Distributed by:Sales and Manufacturing FacilitySmith-Blair, Inc.

30 Globe Ave.Texarkana, AR 71854

P. O. Box 5337Texarkana, TX 75505Phone: 870-773-5127

800-643-9705Fax: 870-773-5212

800-648-6792www.smith-blair.com

SWP/2500/0311

Repair Hints:Breaks with a minor amount of deflection can be repaired witha Full Circle® Repair Clamp. The best method uses a 10” orlonger clamp with multiple section lug. Align the joint in the lug sections with the break. The clamp willarticulate to conform to the deflection. Breaks with a majoramount of deflection should be repaired with a Smith-Blair 400Series Coupling.Breaks with a minor amount of pipe misalignment can berepaired with a Full Circle® Repair Clamp. Breaks with greatermisalignment should be repaired using two Smith-Blair FlexibleCouplings and a short section of pipe or by realigning the pipeand using a Full Circle Repair Clamp.When a gap between the ends of the pipe is one-inch orgreater, a short section of pipe should be put in the opening ora thin strip of sheet metal wrapped around pipe opening toprovide support to the gasket. “If repairing full breaks or joiningpipe, the gap between the pipe ends should be a maximum of1/16” for pipe OD’s less than 4”, 1/4" for pipe OD’s 4” up to 10”,and 1/2" for pipe OD’s 10” and greater in order to comply withthe product’s NSF 61 Listing.Full Circle® Repair Clamps wider than the 30” widths listed inthe catalog are available on special order. If the damage isextensive enough to require a clamp wider than 30”, thefeasibility and economics of replacing the damaged sectionwith new pipe using Smith-Blair Flexible Couplings rather thanrepairing it should be considered.

Improvising wider FCC Clamps:To fill an emergency need in a repair, split or crack wider than theclamps available, narrower clamps can be joined together to makea wider clamp.1. Measure the length of the crack or damaged area. The ends of

cracks and splits should be drilled so they do not propagate downthe pipe.

2. Select two or more clamps with a total width at least 3” wider thanthe damaged area.

3. Carefully remove the gaskets and reposition them so they areoffset by 1”. The armor should go on the closed lug side and theedge of the armors should be about 3/4” from the end of theclamp on 3.50” and larger clamps and about 3/8” for clampssmaller than 3.50”. It is important to position the gasket in straightand to ensure all gaskets are offset by the same amount so theedges of the gaskets will seal against each other. If the gasketsdo not stay in the clamp, they can be held in place with contactcement or tape.

4. If gaskets have been spliced, be sure the spliced areas are heldtightly together. The spliced areas should have less than a 1/16”gap between them. If possible, it is good practice to position theclamp so that the splice on the gasket is not over the damagedarea.

5. Loosely install the clamps on the pipe. Push the clamps togeth-er so they fit snugly, making sure the damaged area is coveredby both the gasket and the band. The lugs can be staggered soadjacent lugs do not align.

6. Rotate the clamp to ensure proper seating of the gaskets. Slowlyand evenly tighten all of the bolts to the recommended torque.Uneven tightening may cause the gasket to extrude and push theclamps apart.

Helpful Hints

WarrantySmith-Blair warrants its products only against defects in materials andworkmanship. Smith-Blair’s liability and customer’s exclusive remedyunder this warranty or any warranty extends for a period of one (1)year from the date of Smith-Blair shipment and is expressly limited torepayment of the purchase price, repair, or replacement, at Smith-Blair’s option, during said period, upon proof satisfactory to Smith-Blair and upon customer’s returning and repaying all charges on suchproducts to factory or warehouse designated by Smith-Blair. THISWARRANTY IS MADE EXPRESSLY IN LIEU OF ALL OTHER WAR-RANTIES, EXPRESS, IMPLIED, OR STATUTORY, WITH RESPECTTO QUALITY, MERCHANTABILITY, OR FITNESS FOR A PARTICU-LAR PURPOSE.!THESE PRODUCTS

DO NOT RESTRAIN AXIALPIPE OR PRODUCT MOVEMENT

Redi-Clamp®

245 & 248 Full Circle® Redi-Clamp®

244 & 247Pipe Repair Clamp

246

Clamp, Coupling and Restraining Products CC-240 03/10

244

246

247

245

248

244 Full Circle® Redi-Clamp®

Smith-Blair’s 244 Full Circle Redi-Clamp provides a fastand economical means of repairing pin holes, punctures orsplits in rigid pipe (steel, plastic, or copper tube). Innovativedesign, extensive testing and state-of-the-art manufacturingtechniques are used to produce the 244 Redi-Clamp.

The 244’s gasket is a full circumferential gasket with twobonded and recessed armor plates. These plates allow thepipe repair clamp to perform similar to a Full Circle Clamp,sealing 360 degrees around the pipe.

The clamp’s band is made out of stainless steel to providecorrosion resistance, flexibility and strength. The lugs are pre-cision cast ductile iron with a contoured surface to equalizeclamping pressures around the pipe. The lug design includes adrop-in bolt feature that eliminates loose parts, saves time andaids installation under adverse conditions.

The bolts are electro-galvanized carbon steel with a di-chromate seal to resist corrosion. The bolts have a generousshoulder ensuring a positive fit in the open slot to secureagainst turning during maximum tightening.

NOTE: Smith-Blair’s 244 Full Circle Redi-Clamp may be used formost water and gas applications with the exception of gas plasticpipe repair. It is suitable for restoring shape and marking crimpedpolyethylene gas service lines.

*Do not Use 12” wide clamps to join pipe.

2

Unique Lug Design ProvidesUniform Compression

Standard Catalog NumberQty. PerCtn.

MetricNominal

Pipe Size andPipe O.D.

Inches

Width Inches

Wt.Ea.Lbs.

Electro-GalvanizedBolts

Stainless Steel Bolts

NominalPipe Size and

Pipe O.D.MM

Width MM

Wt.EachKg.

1/2"0.63

3 0.70 244-00006303-000 244-00006303-001 16 15 mm16.00

76 0.326 1.40 244-00006306-000 244-00006306-001 10 152 0.64

1/2"0.84

3 0.80 244-00008403-000 244-00008403-001 16 15 mm21.30

76 0.366 1.60 244-00008406-000 244-00008406-001 10 152 0.73

*12 3.20 244-00008412-000 244-00008412-001 6 305 1.453/4"0.88

3 0.80 244-00008803-000 244-00008803-001 16 20 mm22.35

76 0.366 1.60 244-00008806-000 244-00008806-001 10 152 0.73

3/4"1.05

3 0.85 244-00010503-000 244-00010503-001 12 20 mm26.70

76 0.396 1.70 244-00010506-000 244-00010506-001 8 152 0.77

*12 3.40 244-00010512-000 244-00010512-001 9 305 1.541"

1.133 0.87 244-00011303-000 244-00011303-001 12 25 mm

28.7076 0.39

6 1.70 244-00011306-000 244-00011306-001 8 152 0.77

1"1.32

3 0.90 244-00013203-000 244-00013203-001 12 25 mm33.53

76 0.416 1.80 244-00013206-000 244-00013206-001 8 152 0.82

*12 3.60 244-00013212-000 244-00013212-001 9 305 1.631 1/4"1.38

3 0.90 244-00013803-000 244-00013803-001 12 32 mm35.05

76 0.416 1.80 244-00013806-000 244-00013806-001 6 152 0.82

1 1/4"1.66

3 0.95 244-00016603-000 244-00016603-001 12 32 mm42.20

76 0.436 1.95 244-00016606-000 244-00016606-001 6 152 0.88

*12 3.90 244-00016612-000 244-00016612-001 6 305 1.771 1/2"1.63

3 0.95 244-00016303-000 244-00016303-001 12 40 mm41.40

76 0.436 1.95 244-00016306-000 244-00016306-001 6 152 0.88

1 1/2"1.90

3 1.00 244-00019003-000 244-00019003-001 10 40 mm48.30

76 0.456 2.00 244-00019006-000 244-00019006-001 6 152 0.91

*12 4.00 244-00019012-000 244-00019012-001 6 305 1.812"

2.133 1.30 244-00021303-000 244-00021303-001 8 50 mm

54.1076 0.59

6 2.60 244-00021306-000 244-00021306-001 4 152 1.18

2"2.38

3 1.60 244-00023803-000 244-00023803-001 8 50 mm60.45

76 0.736 3.20 244-00023806-000 244-00023806-001 6 152 1.45

*12 6.40 244-00023812-000 244-00023812-001 4 305 2.90

Material SpecificationsBANDS: Stainless Steel Type 304LUGS: Ductile Iron per ASTM A536.GASKET: Nitrile (Buna N)-Compounded to resist oil,

natural gas, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals (contact Smith-Blair® engineerson applications involving chemicals).Temperatures -20°F to +180°F.

NUTS &BOLTS: Carbon Steel SAE J429 electrogalvanizedwith di-chromate seal. Optional 304 stainless steel with Fluoropolymer coated nutsto prevent galling.

PRESSURERATING: Up to 150 PSI¤ (see footnote)

Material Specifications are subject to change.

This product does notrestrain axial pipe movement

! WARNING

¤The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer). For a particular instal-lation, the allowable working pressure will be determined by the size of pipe, type of pipe, type of clamp, type and extent of damage, service, con-ditions, environmental conditions and installation workmanship.

245 Redi-Clamp®

Standard Catalog NumberQty.PerCtn.

MetricNominal

Pipe Size andPipe O.D.

Inches

WidthInches

Wt.Ea.Lbs.

Electro-GalvanizedBolts


NominalPipe Size and

Pipe O.D.MM

Width MM

Wt.EachKg.

1/2".84

3 0.6 245-00008403-000 245-00008403-001 24 15 mm21.33

76 0.30 6 1.3 245-00008406-000 245-00008406-001 12 152 0.60

3/4"1.05

3 0.7 245-00010503-000 245-00010503-001 16 20 mm26.67

76 0.306 1.4 245-00010506-000 245-00010506-001 10 152 0.60

1"1.32

3 0.7 245-00013203-000 245-00013203-001 16 25 mm33.52

76 0.306 1.5 245-00013206-000 245-00013206-001 10 152 0.70

1 1/4"1.66

3 0.8 245-00016603-000 245-00016603-001 12 32 mm42.16

76 0.406 1.6 245-00016606-000 245-00016606-001 6 152 0.70

1 1/2"1.90

3 0.9 245-00019003-000 245-00019003-001 12 40 mm48.26

76 0.406 1.9 245-00019006-000 245-00019006-001 8 152 0.90

2"2.00

3 0.9 245-00020003-000 245-00020003-001 8 50 mm50.80

76 0.406 1.9 245-00020006-000 245-00020006-001 4 152 0.90

2"2.38

3 1.0 245-00023803-000 245-00023803-001 850 mm60.45

76 0.506 2.0 245-00023806-000 245-00023806-001 4 152 0.909 3.0 245-00023809-000 245-00023809-001 4 229 1.40

12 4.0 245-00023812-000 245-00023812-001 4 305 1.80

2 1/2"2.88

3 1.0 245-00028803-000 245-00028803-001 865 mm73.15

76 0.506 2.1 245-00028806-000 245-00028806-001 3 152 1.009 3.1 245-00028809-000 245-00028809-001 4 229 1.40

12 4.1 245-00028812-000 245-00028812-001 4 305 1.90

3"3.00

3 1.2 245-00030003-000 245-00030003-001 680 mm76.20

76 0.506 2.5 245-00030006-000 245-00030006-001 3 152 1.109 3.7 245-00030009-000 245-00030009-001 4 229 1.70

12 5.0 245-00030012-000 245-00030012-001 4 305 2.30

3"3.50

3 1.3 245-00035003-000 245-00035003-001 680 mm88.90

76 0.606 2.6 245-00035006-000 245-00035006-001 4 152 1.209 4.0 245-00035009-000 245-00035009-001 4 229 1.80

12 5.2 245-00035012-000 245-00035012-001 4 305 2.40

3 1/2" - 4"4.00

3 1.3 245-00040003-000 245-00040003-001 490-100 mm

101.60

76 0.606 2.7 245-00040006-000 245-00040006-001 4 152 1.209 4.0 245-00040009-000 245-00040009-001 4 229 1.80

12 5.4 245-00040012-000 245-00040012-001 4 305 2.40

Smith-Blair’s 245 Redi-Clamp provides a fast, eco-nomical means of repair for pin holes, punctures or splits inpipe. Innovative design, extensive testing and state-of-the-art manufacturing techniques are used to produce the 245Redi-Clamp.

The 245’s gasket has finely grided surfaces that con-form to irregularities on the pipe surface and provide supe-rior sealing on rough or pitted areas. The bands are stain-less steel to provide corrosion resistance, flexibility andstrength.

The clamp’s lugs are precision cast ductile iron with acontoured surface to equalize clamping pressure aroundthe pipe. The lug design includes a drop-in bolt feature thateliminates loose parts, saves time and aids installationunder adverse conditions.

The bolts are electro-galvanized carbon steel with a di-chromate seal to resist corrosion. They have a generousshoulder ensuring a positive fit in the open slot to secureagainst turning during maximum tightening.

1/4” thick gasket available upon request.

3

Material SpecificationsBANDS: Stainless Steel Type 304LUGS: Ductile Iron per ASTM A536. GASKET: Nitrile (Buna N)-Compounded to resist oil,


NUTS &BOLTS: Carbon Steel SAE J429 electrogalvanizedwith di-chromate seal. Optional 304 stainless steel with Fluoropolymer coated nuts to prevent galling.




245 Redi-Clamp®

Standard Catalog NumberQty.PerCtn.

Metric

Nominal PipeSize andPipe O.D.

Inches

WidthInches

Wt.Ea.Lbs.

Electro- GalvanizedBolts


Nominal PipeSize and Pipe O.D.

MM

Width MM

Wt.EachKg.

4"4.25

3 1.4 245-00042503-000 245-00042503-001 4 100 mm107.95

76 .66 2.8 245-00042506-000 245-00042506-001 3 152 1.3

4"4.50

3 1.4 245-00045003-000 245-00045003-001 4100 mm114.30

76 .66 2.8 245-00045006-000 245-00045006-001 3 152 1.39 4.2 245-00045009-000 245-00045009-001 3 229 1.9

12 5.6 245-00045012-000 245-00045012-001 4 305 2.5

5"5.00

3 1.5 245-00050003-000 245-00050003-001 6125 mm127.00

76 .76 3.0 245-00050006-000 245-00050006-001 3 152 1.49 4.5 245-00050009-000 245-00050009-001 4 229 2.012 6.0 245-00050012-000 245-00050012-001 4 305 2.7

5"5.56

3 1.6 245-00055603-000 245-00055603-001 6125 mm141.22

76 .76 3.2 245-00055606-000 245-00055606-001 3 152 1.59 4.8 245-00055609-000 245-00055609-001 4 229 2.2

12 6.4 245-00055612-000 245-00055612-001 3 305 2.9

6"6.00

3 1.8 245-00060003-000 245-00060003-001 6150 mm152.40

76 .86 3.6 245-00060006-000 245-00060006-001 3 152 1.69 5.4 245-00060009-000 245-00060009-001 3 229 2.512 7.2 245-00060012-000 245-00060012-001 3 305 3.3

6"6.25 3 1.8 245-00062503-000 245-00062503-001 6 150 mm

158.75 76 .8

6"6.63

3 1.8 245-00066303-000 245-00066303-001 6150 mm168.40

76 .86 3.7 245-00066306-000 245-00066306-001 3 152 1.79 5.5 245-00066309-000 245-00066309-001 2 229 2.512 7.4 245-00066312-000 245-00066312-001 3 305 3.4

8"8.00

3 2.1 245-00080003-000 245-00080003-001 4200 mm203.20

76 1.06 4.2 245-00080006-000 245-00080006-001 2 152 1.99 6.3 245-00080009-000 245-00080009-001 2 229 2.9

12 8.4 245-00080012-000 245-00080012-001 2 305 3.8

8"8.63

3 2.2 245-00086303-000 245-00086303-001 4200 mm219.20

76 1.06 4.4 245-00086306-000 245-00086306-001 2 152 2.09 6.6 245-00086309-000 245-00086309-001 2 229 3.012 8.8 245-00086312-000 245-00086312-001 2 305 4.0

*10"10.00

3 2.5 245-00100003-000 245-00100003-001 4250 mm254.00

76 1.16 5.0 245-00100006-000 245-00100006-001 2 152 2.39 7.5 245-00100009-000 245-00100009-001 2 229 3.4

12 10.0 245-00100012-000 245-00100012-001 2 305 4.5

*10"10.75

3 2.8 245-00107503-000 245-00107503-001 4250 mm273.05

76 1.36 5.6 245-00107506-000 245-00107506-001 2 152 2.59 8.4 245-00107509-000 245-00107509-001 2 229 3.812 11.2 245-00107512-000 245-00107512-001 2 305 5.1

*12"12.00

3 2.9 245-00120003-000 245-00120003-001 4300 mm304.80

76 1.36 5.8 245-00120006-000 245-00120006-001 2 152 2.69 8.7 245-00120009-000 245-00120009-001 2 229 3.9

12 11.6 245-00120012-000 245-00120012-001 2 305 5.3

*12"12.75

3 3.0 245-00127503-000 245-00127503-001 4300 mm323.85

76 1.46 6.0 245-00127506-000 245-00127506-001 2 152 2.79 9.0 245-00127509-000 245-00127509-001 2 229 4.112 12.0 245-00127512-000 245-00127512-001 2 305 5.4

*2 piece design

4

246 Pipe Repair Clamp (Multi-Band)

Standard

Catalog NumberQty.Per.Ctn.

Metric

NominalPipe Size

Inches

PipeO.D.

Inches

WidthInches

Wt.Ea.Lbs.

NominalPipe Size

MM

PipeO.D. MM

WidthMM

Wt.EachKg.

10" 10.00 5 12.0 246-00100005-000 2 250 254 127 5.410 24.0 246-00100010-000 1 254 10.9

10" 10.25 5 12.2 246-00102505-000 2 250 268 127 5.510 24.4 246-00102510-000 1 254 11.1

10" 10.75 5 14.1 246-00107505-000 2 250 273 127 6.410 28.2 246-00107510-000 1 254 12.8

12" 12.00 5 15.1 246-00120005-000 2 300 305 127 6.910 30.2 246-00120010-000 1 254 13.7

12" 12.25 5 15.1 246-00122505-000 2 300 311 127 6.910 30.2 246-00122510-000 1 254 13.7

12" 12.75 5 15.1 246-00127505-000 2 300 324 127 6.910 30.2 246-00127510-000 1 254 13.7

14" 14.00 5 15.7 246-00140005-000 2 350 350 127 7.110 31.4 246-00140010-000 1 254 14.3

16" 16.00 5 16.6 246-00160005-000 1 400 400 127 7.510 33.2 246-00160010-000 1 254 15.1

18" 18.00 5 18.1 246-00180005-000 1 450 450 127 8.210 36.2 246-00180010-000 1 254 16.5

20" 20.00 5 19.3 246-00200005-000 1 500 500 127 8.810 38.6 246-00200010-000 1 254 17.5

22" 22.00 5 20.4 246-00220005-000 1 550 550 127 9.210 40.8 246-00220010-000 1 254 18.5

24" 24.00 5 21.8 246-00240005-000 1 600 600 127 9.910 43.6 246-00240010-000 1 254 19.8

30" 30.00 5 22.8 246-00300005-000 1 750 750 127 10.410 45.6 246-00300010-000 1 254 20.7

Smith-Blair’s 246 Pipe Repair Clamp provides a fast, eco-nomical means of repair for pin holes, punctures or splits in pipe.Innovative design, extensive testing and state-of-the-art manufac-turing techniques are used to produce the 246 Pipe RepairClamp.

The 246’s gasket has finely grided surfaces that conform toirregularities on the pipe surface and provide superior sealing onrough or pitted areas. Its bands are stainless steel to provide cor-rosion resistance, flexibility and strength.

The clamp’s lugs are precision cast ductile iron. The lugdesign includes a drop-in bolt feature that eliminates loose parts,saves time and aids installation under adverse conditions. Itcomes with high strength, low alloy bolts that resist corrosion, andthe bolt’s oval neck fits securely to prevent turning.

5

Material SpecificationsBANDS: Stainless Steel Type 304LUGS: Ductile Iron per ASTM A536. Flexi-Coat®

epoxy coated.GASKET: Nitrile (Buna N)-Compounded to resist oil,


NUTS &BOLTS: High strength low alloy steel with rolled threads and semi-finished heavy hexagon nuts to AWWA C111(ANSI-A21.11)standards.Optional 304 stainless steel bolts with Fluoropolymer coated nuts to prevent galling.




247 Full Circle All Stainless Steel Redi-Clamp®

Standard

Catalog NumberQty. Per

Ctn.

MetricNominalPipe Size

Inches

O.D.Inches

WidthInches

Wt.EachLbs.

NominalPipe Size

MM

O.D.MM

WidthMM

Wt.EachKg.

1/2" 0.63 3 .70 247-00006303-000 6 15 16.00 76 0.326 1.40 247-00006306-000 6 152 0.64

1/2" 0.84 3 .80 247-00008403-000 6 15 21.30 76 0.366 1.60 247-00008406-000 6 152 0.73

3/4" 0.88 3 .80 247-00008803-000 6 20 22.35 76 0.366 1.60 247-00008806-000 6 152 0.73

3/4" 1.05 3 .85 247-00010503-000 6 20 26.70 76 0.396 1.70 247-00010506-000 6 152 0.77

1" 1.13 3 .87 247-00011303-000 6 25 28.70 76 0.396 1.70 247-00011306-000 6 152 0.77

1" 1.32 3 .90 247-00013203-000 6 25 33.53 76 0.416 1.70 247-00013206-000 6 152 0.82

1 1/4" 1.38 3 .90 247-00013803-000 6 32 35.05 76 0.416 1.80 247-00013806-000 6 152 0.82

1 1/4" 1.66 3 .95 247-00016603-000 6 32 42.20 76 0.436 1.95 247-00016606-000 6 152 0.88

1 1/2" 1.63 3 .95 247-00016303-000 6 40 41.40 76 0.436 1.95 247-00016306-000 6 152 0.88

1 1/2" 1.90 3 1.00 247-00019003-000 6 40 48.30 76 0.456 2.00 247-00019006-000 6 152 0.91

2" 2.13 3 1.30 247-00021303-000 6 50 54.10 76 0.596 2.60 247-00021306-000 6 152 1.18

2" 2.38 3 1.60 247-00023803-000 8 50 60.45 76 0.736 3.20 247-00023806-000 4 152 1.45

Smith-Blair’s 247 Full Circle Redi-Clamp provides a fast,economical means of repairing pin holes, punctures or splits inrigid pipe (steel, plastic, or copper tube). Innovative design,extensive testing and state-of-the-art manufacturing techniquesare used to produce the 247 All Stainless Steel Redi-Clamp.

The 247’s gasket is a full circumferential gasket with twobonded and recessed armor plates. These plates allow the clampto perform similar to a Full Circle Clamp, sealing 360-degreesaround the pipe.

The clamp’s band is stainless steel to provide corrosionresistance, flexibility and strength. The lugs are precision caststainless steel with a contoured surface to equalize clampingpressures around the pipe. The lug design includes a drop-in boltfeature that eliminates loose parts, saves time and aids installa-tion under adverse conditions.

The stainless steel bolts resist corrosion and have a gener-ous shoulder ensuring a positive fit in the open slot to secureagainst turning during maximum tightening.

6

NOTE: Smith-Blair’s 247 Full Circle Redi-Clamp may be used formost water and gas applications with the exception of gas plasticpipe repair. It is suitable for restoring shape and marking crimpedpolyethylene gas service lines.

Unique Lug Design ProvidesUniform Compression

This product does notrestrain axial pipe movement

!

WARNING

Material SpecificationsBANDS: Stainless Steel Type 304LUGS: ASTM A743 GRCF8 Stainless Steel (304

equivalent)GASKET: Nitrile (Buna N)-Compounded to resist oil,


NUTS &BOLTS: 304 stainless steel with Fluoropolymer coated nuts to prevent galling.




248 Redi-Clamp®

All Stainless Steel

Standard

Catalog Number

Metric

Nominal Pipe Size and Pipe O.D.

Inches

WidthInches

WtEa.Lbs.

Qty.PerCtn.

Nominal PipeSize andPipe O.D.

MM

WidthMM

Wt.EachKg.

1/2"0.84

3 .6 248-00008403-000 24 15 mm 76 .36 1.3 248-00008406-000 12 21.30 152 .6

3/4"1.05

3 .7 248-00010503-000 12 20 mm 76 .36 1.4 248-00010506-000 9 26.70 152 .6

1"1.32

3 .7 248-00013203-000 12 25 mm 76 .36 1.5 248-00013206-000 9 33.40 152 .7

1 1/4"1.66

3 .8 248-00016603-000 12 32 mm 76 .46 1.6 248-00016606-000 6 42.20 152 .7

1 1/2"1.90

3 .9 248-00019003-000 12 40 mm 76 .4 6 1.9 248-00019006-000 6 48.30 152 .9

2"2.00

3 .9 248-00020003-000 8 50 mm 76 .46 1.9 248-00020006-000 4 50.80 152 .9

2"2.38

3 1.0 248-00023803-000 850 mm60.30

76 .56 2.0 248-00023806-000 4 152 .99 3.0 248-00023809-000 4 229 1.412 4.0 248-00023812-000 4 305 1.8

Smith-Blair’s 248 Redi-Clamp provides a fast, economicalmeans of repair for pin holes, punctures or splits in pipe.Innovative design, extensive testing and state-of-the-art manu-facturing techniques are used to produce the 248 All StainlessSteel Redi-Clamp.

The 248’s gasket has finely grided surfaces that conform toirregularities on the pipe surface and provide superior sealing onrough or pitted areas. The bands are stainless steel to providecorrosion resistance, flexibility and strength.

The clamp’s lugs are precision cast stainless steel with acontoured surface to equalize clamping pressure around thepipe. The lug design includes a drop-in bolt feature that elimi-nates loose parts, saves time and aids installation underadverse conditions.

The stainless steel bolts resist corrosion and have a gener-ous shoulder ensuring a positive fit in the open slot to secureagainst turning during maximum tightening.

7

Material SpecificationsBANDS: Stainless Steel Type 304LUGS: ASTM A743 GRFC8 Cast Stainless (304

equivalent)GASKET: Nitrile (Buna N)-Compounded to resist oil,


NUTS &BOLTS: 304 stainless steel with Fluoropolymer coated nuts to prevent galling.




More Smith-Blair Products

Smith-Blair’s Single Band FullCircle All S tainless S teel Rep airClamp provides an effective andeconomical means for fast, longlasting repair to virtually any type of

damaged pipe up to 12” in diameter. The combination of premium grades of stainless steels

used in Smith-Blair Clamp Couplings brings a degree of cor-rosion resistance to the marketplace never before availableat popular prices.

Smith-Blair’s 226 Single Band Full Circle Rep airClamp provides a fast, economical means of repairing fullcircumferential breaks, holes, cracks and other types of dam-age to cast iron, steel, asbestos cement, copper, aluminum,plastic, fiberglass and other types of pipe. The clamps havea built-in O. D. range enabling them to fit several pipe outsidediameters within their nominal pipe size range.

Full Circle Repair Clamps feature a lap type gasket withmolded tapered ends to provide efficient equalized sealing atthe lap joint on any pipe within the clamp’s range. The gaskethas a finely gridded surface with the resilience to easily con-form to irregularities on rough pipe surfaces or in pittedareas, providing an effective seal all around the pipe.

A stainless steel bridge plate spans the opening of thelugs and is bonded flush into the gasket to prevent wrinkling

in the lug area, providing an evengasket pressure at all points aroundthe full circumference of the pipe.

The band is made of stainlesssteel, selected to provide corrosionresistance, flexibility and strength. The lugs are securelyattached to the stainless steel band and have mutually sup-porting stabilizing fingers to permit maximum torquing of thebolts. The lug design includes a drop-in bolt feature that elim-inates loose parts, saves time and aids installation underadverse conditions.


8

Sales & Manufacturing FacilitySmith-Blair, Inc.


P.O. Box 5337Texarkana, TX 75505

Phone: 800-643-9705 • 870-773-5127Fax: 800-648-6792 • 870-773-5212

www.smith-blair.com

Distributed by:



SWP/2500/0310

Clamp, Coupling and Restraint Products CC 274 03/11

Bell Joint Leak Clamp

274

Intermediate and Larger Sizes Available Upon Request

Smith-Blair 274 Bell Joint LeakClamps provide a fast, economical meansof sealing or preventing leaks in pipe withbell and spigot caulked or rubber ring joints.

The design of the “Kee-Lok”® gasketsand Bell-Spigot rings enables a single clampto fit both caulked and rubber gasket jointson virtually all classes and brands of castiron or ductile iron pipe in nominal sizes upto 36-inches. They are also suitable for useon AWWA C-900 and C-905 PVC pipe thru24” (longer bolts required) (DR 18 minimumwall thickness).

“Kee-Lok®” gaskets are available in sizesup to 24” in diameter only.

(Excluding 14” diameter size).

Material SpecificationsBELL-SPIGOT Ductile Iron per ASTM 536 or CarbonRING: Steel on 14” size only ASTM A36.GASKET: Nitrile (Buna N) NSF®61 listed-

Compounded to resist oil, natural gas, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers for applications involving chemicals).Temperatures: -20° to +180°F.

BOLTS AND High strength low alloy steel withNUTS: heavy, semi-finished hexagon nuts to

ASTM A-307 (ANSI-A21.11) standards.Stainless Steel available.

FINISH: Fusion bonded Flexi-Coat™ Epoxycoating.

Material Specifications are subject to change.14” Not Shown

AdvantagesReduced InventoryA single clamp fits virtually all classes and brands of castiron pipe and PVC pipe in each nominal size.

Easy InstallationFewer interlocking parts make installation quick andeasy.

“Kee-Lok”® GasketEliminates field cutting and the use of staples, tongs ortape to hold the gasket in position (for 2” O.D. through24” O.D. only, excluding 14” size).

Corrosion Resistant MaterialsHeavy cast ductile iron bell-spigot rings and highstrength low alloy steel bolts and nuts. Stainless Steelavailable. (Heavy carbon steel bell-spigot rings on 14”size only).

No Loss of ServiceCan be installed without interrupting the flow in thepipeline.

Assembly Diagram

When the Bell Joint Leak Clampis assembled on the pipe bell, the bellring and spigot ring are connected bybolts and the gasket is captured in agasket cavity formed by the spigotring, pipe spigot, the pipe bell face,bell ring and the joint packingmaterial.

Tightening the bolts draws thetwo bell and spigot rings toward eachother, compressing the rubber gasketagainst the pipe spigot face of the

pipe bell and joint packing material toform a tight seal.

The carefully engineeredhardness and bulk, plus the uniqueshape of the rubber gasket surfacesthat seal against the pipe spigot andjoint packing material are flat surfacesproviding full contact.

The gasket extends well up ontothe face of the bell and angles slightlyaway from the bell. The back of thegasket has an angle of approximately

45-degrees that mates with acorresponding angle on the face ofthe spigot ring. As tightening occursand the spigot ring moves forward,the angular surface on the spigot ringforces the gasket directly against thepipe spigot and joint packing material.After maximum compression againstthe joint packing material has beenreached, the gasket flows forwardagainst the bell face to assure a tightseal.

Smith-Blair’s Kee-Lock gasket elimates the difficultand often inaccurate task of cutting the gasket in the field.With the Kee-Lock Gasket, there is no need for staples,tongs, tape or other clumsy gadgets normally used to joingasket ends and hold them in position while assemblingthe clamp.

To install the gasket, place it on the pipe and snap itsends together.

The gasket is supplied with an extension piece. Thispiece is left in place for use on larger O.D. pipe andremoved for use on smaller O.D. pipe.

Bell Joint Clamps in 14”, 30” and 36” diameters areavailable with bias cut gaskets only.

“Kee-Lok” Gasket

NutBolt

Bell Ring

Pipe Bell

Bell Face

Gasket

Spigot Ring

Pipe Spigot

274 Bell Joint Leak Clamp

2

Smith-Blair Bell Joint Leak Clamps in sizes 2” through12” have split interlocking bell-spigot rings. Each clamphas two bell-spigot rings made up of identical,interchangeable castings. Either ring may be used as aspigot ring to compress the gasket, and either ring may beused as a bell ring behind the bell as an anchor to tightenagainst. For use with either caulked or rubber gasket stabtype cast iron and C900 (DR 18) bell and spigot joints.

Interlocking Bell or Spigot Rings

High-StrengthLow-Alloy BoltsStainless Steel

available“Kee-Lok”

Gasket

Split Interlocking Bell or Spigot Rings

Segmented Bell or Spigot Rings

Note:274 Bell Lock Joint Leak Clamps size

14” are available as a steel fabrication.


This product does not restrain axial pipe movement.

!WARNING

16” through 36” Smith-Blair® Bell Joint Leak Clamps havesegmented bell-spigot rings. Each clamp has two or morebell-spigot rings made up of identical, interchangeablecastings. Either ring may be used as a spigot ring tocompress the gasket, and either ring may be used as abell ring behind the bell as an anchor to tighten against.For use with either caulked or rubber ring stab type castiron, and C905 bell and spigot joints.

274 Bell Joint Leak ClampSizes 2”-12”

274 Bell Joint Leak ClampSizes 16”-36”

Cast Spacers

“Kee-Lok”Extension Piece

SingleNotch

Cast RingSegment

Connector Link

Two Notches

Low Alloy Bolts and Nuts Nitrile (Buna N)

3

2”-12”

16”-36”

SWP/2500/03/11

Sales and Manufacturing FacilitySmith-Blair, Inc.


P. O. Box 5337Texarkana, TX 75505

Phone: 800-643-9705 • 870-773-5127Fax: 800-648-6792 • 870-773-5212

www.smith-blair.com

*Fabricated Carbon Steel.†Not recommended for PVC pipe.

•Available with Bias Cut Gasket Only May be used on C900, cast iron pipe sizes. Longer bolts may be required (see below).

DI Pipe and Short Bell C900 PVC

DI Pipe and Longer Bell C900 PVC

Standard (+) Bolts

Catalog Number


Inches

Pipe O.D.RangeInches

WeightEach Lbs. No.

BoltSize

Inches

NominalPipe Size

MM

O.D.Range MM

WeightEach KG

2 2.50 3 4 1/2 x 7 274-00000250-000 50 64 1.43 3.80-3.96 15 4 5/8 x 9 274-00000380-000 80 97-100 6.84 4.80-5.00 18 4 5/8 x 9 274-00000480-000 100 122-127 8.26 6.90-7.10 22 4 5/8 x 9 274-00000690-000 150 175-180 10.08 9.05-9.30 31 6 5/8 x 10 1/2 274-00000905-000 200 230-236 14.1

10 11.10-11.40 35 6 5/8 x 10 1/2 274-00001110-000 250 282-289 15.912 13.20-13.50 45 6 5/8 x 10 1/2 274-00001320-000 300 336-342 20.4

14*• 15.30 52 8 5/8 x 11 274-00001530-000 350 389 24.014*• 15.65 54 8 5/8 x 11 274-00001565-000 350 398 25.016 17.40-17.80 73 9 5/8 x 13 274-00001740-000 400 442-452 33.118 19.50-19.92 84 12 5/8 x 13 274-00001950-000 450 495-505 38.120 21.60-22.06 112 12 5/8 x 13 274-00002160-000 500 549-560 50.824 25.80-26.32 124 12 5/8 x 13 274-00002580-000 600 655-668 56.3

30†• 31.74-32.74 239 15 5/8 x 17 274-00003174-000 762 806-832 108.636†• 37.96-38.70 295 18 5/8 x 17 274-00003796-000 914 964-983 134.1

Standard (+) Bolts

Catalog Number**


Inches

Pipe O.D.RangeInches

WeightEach Lbs. No.

Bolt or StudSize

Inches

NominalPipe Size

MM

O.D.Range MM

WeightEach KG

4 4.80-5.00 19 4 5/8 x 17 274-40000480-500 100 122-127 8.66 6.90-7.10 23 4 5/8 x 17 274-40000690-500 150 175-180 10.48 9.05-9.30 33 6 5/8 x 17 274-30000905-500 200 230-236 15.010 11.10-11.40 37 6 5/8 x 17 274-30001110-500 250 282-289 16.812 13.20-13.50 48 6 5/8 x 17 274-30001320-500 300 336-342 21.8

14*• 15.30 54 8 5/8 x 17 274-30001530-500 350 389 20.914*• 15.65 58 8 5/8 x 17 274-30001565-500 350 398 26.316 17.40-17.80 78 9 5/8 x 25 274-40001740-000 400 442-452 35.418 19.50-19.92 90 12 5/8 x 25 274-40001950-000 450 495-505 40.820 21.60-22.06 118 12 5/8 x 25 274-40002160-000 500 549-560 53.524 25.80-26.32 130 12 5/8 x 25 274-40002580-000 600 655-668 59.0

30†• 31.74-32.74 245 15 5/8 x 27 274-40003174-000 762 806-832 111.136†• 37.96-38.70 301 18 5/8 x 27 274-40003796-000 914 964-983 136.5


*Fabricated Carbon Steel.†Not recommended for PVC pipe.•Available with Bias Cut Gasket Only

**-500 end code = 12” of thread**-000 end code = All thread

5/8 x 17” bolts have 12-inches of thread.5/8 x 25” all thread.5/8 x 27” all thread.

Distributed by:

4

1

Clamp and Coupling Products CC300 04/10

Service Saddles311 313 315 317 325 331 357 362366 371 372 397AWWA C800

313

331

315

366

357

317

372

325

2

General Information

Smith-Blair® offers the most complete line of servicesaddles in the industry with NSF Standard 61 approval forfast, dependable tapping of all types of pipes.

Such outstanding features as the Taper Seal™ gasket,heavy forged bales, and a wrap-around design thatreinforces and supports the pipe, are combined in superiorservice saddles to provide low initial cost, ease ofinstallation and excellent lasting qualities.

Increased protection against corrosion is standard whenSmith-Blair® Flexi-Coat™ epoxy coating or all stainless steelsaddles are used. These products give you the option toselect the degree of corrosion resistance necessary for yourapplication.

In addition to the primary use of tapping pipe to providebranch connection, Smith-Blair® Service Saddles are widelyused special applications like installing air and vacuumvalves, pitot tubes and other equipment, and as pipehangers and sign mounting brackets.

Smith-Blair® Service Saddles are available in a widevariety of sizes, configurations and materials for use on alltypes of pipe, in all types of environmental conditions, tomake taps ranging from a 5/8” (15 mm) tap into a 1” (25 mm)pipe, to making a 2” (50 mm) tap into 42 ” (1067 mm) pipe.(For tapping larger outlets and larger pipe, use Smith-Blair®

600 Series Tapping Sleeves.)

Service Saddles for 1” through 18” pipe Service Saddles for 18” through 42” pipe

Reducing Bushing

Reducing Bushing--Nylon

Size and Type Catalog Number Wt. Each Lbs.

1"CC x 3/4" CC 000-00070074-090 0.08

The technical performance data, specifications and recommendationsin this bulletin are intended as a reference for the utilization of Smith-Blairclamps and couplings by piping designers, installers and owners, andmaintenance personnel.

Many situations have special conditions requiring the expertise ofqualified personnel who must make the decision regarding application. Thematerial presented here is not intended as a substitute for professional

assistance.Pressures, temperatures and other performance standards stated

herein should never be exceeded.Although an extra effort has been made to insure the accuracy of this

material, Smith-Blair makes no express or implied warranties regarding theinformation or materials contained in this bulletin. Anyone making use ofthis information assumes all liability resulting from such use.

Certified to NSF®/ANSI 61

3

Product ProductNumber Description Types of Pipe *Working Pressure Page

Number

311

Single BaleIron Service SaddlePipe Sizes: 1" thru 12"Outlet Sizes: 5/8" thru 2"

Steel, Cast Iron,Asbestos Cement *Up to 300 PSI 5-8

313

Double BaleIron Service SaddlePipe Sizes: 1 1/4" thru 24"Outlet Sizes: 5/8" thru 4"

Steel, Cast Iron,Asbestos Cement *Up to 300 PSI 5, 9-11

315

Single Strap, Flexi-Coat EpoxyCoated Iron Service Saddle withwide Stainless Steel StrapPipe Sizes: 1" thru 12"Outlet Sizes: 5/8" thru 2"

Steel, Cast Iron,Asbestos Cement,PVC

*Up to 300 PSI 12-15

317

Double Strap, Flexi-Coat EpoxyCoated Iron Service Saddle withwide Stainless Steel StrapsPipe Sizes: 1 1/4" thru 24"Outlet Sizes" 5/8" thru 4"


*Up to 300 PSI 12-1316-18

331

Double BaleIron Repair Service SaddlePipe Sizes: 4" thru 12"Outlet Sizes: 5/8" thru 2"

Steel, Cast Iron,Asbestos Cement *Up to 300 PSI 19-21

357

Double Strap, Flexi-Coat EpoxyCoated Iron Service Saddle with wideStainless Steel StrapsPipe Sizes: 6" thru 12"Outlet Sizes: 3" thru 4"

PVC, Steel, Cast Iron *Up to 150 PSI 22-23

362

Double BaleIron Service SaddlePipe Sizes: 6" thru 36"Outlet Sizes: 5/8" thru 2"

Concrete CylinderPipe, ConcreteCoated Steel Pipe

*Up to 300 PSI 24-25

366

Triple BaleIron Service SaddlePipe Sizes: 19.25" O.D. thru 43.15"O.D. Outlet Sizes: 3/4" thru 2"

Large Diameter Steel,Cast Iron, AsbestosCement, PVC

*Up to 300 PSI 26-28

371

Single Bolt All StainlessSteel Service SaddlePipe Sizes: 4" thru 12"Outlet Sizes" 1/2" thru 1"


*Up to 150 PSI 29-30

372

Double Bolt All StainlessSteel Service SaddlePipe Sizes: 4" thru 12"Outlet Sizes: 1 1/2" thru 2"


*Up to 150 PSI 29-30

397

Service Saddle DuctileIron body Flexi-Coat Epoxy Coatedwith Stainless Steel StrapPipe Sizes: 2" thru 12"Outlet Sizes: 3/4" thru 2"

PVC (Cast Iron andSteel Sizes) *Up to 200 PSI 31

325 Bronze Service Saddle Steel, DI PVC *Up to 150 PSI 32-33

Service SaddleSelection Guide & Index


4

TappingProduct

ProductNumber Product Number and Type Outlet Size Pipe DR For Pipe Sizes *Working

Pressure

317

Double Strap Saddle with Flexi-Coat Epoxy Coating per AWWAC213 and Wide Stainless Strapsand Spring Washers

*5/8" thru 2 1/2" 7.3-17 4" thru 16" *Up to 255 PSI

331Repair Servic Saddle with SpringWashers and Wide StainlessSteel Straps

5/8" thru 2" 7.3-17 4" thru 12" *Up to 255 PSI

371All Stainless Steel Single BoltService Saddle with SpringWashers


372All Stainless Steel Double BoltService Saddle with SpringWashers

397

Flexi-Coat Epoxy Coated perAWWA C213 Ductile Iron Bodywith Stainless Steel Strap withSpring Washers


Products for Use on High Density Polyethylene Pipe

*Pressure depends on size, type and condition of the pipe and the quality of the installation.**Saddles for P.E. Pipe should be sized so the top end of the range of the saddle is as close as possible to the O.D. of the P.E. Pipe.

Only the following part numbers are approved for use on Smith-Blair Service Saddles for use on HDPE Pipe.

Bolt Size Part Number Quantity

5/8" 150115-002 50

Because polyethylene’s thermal expansion ratio ismuch higher than other types of material, stainlesssteel spring washers must be used with all of theseproducts. Spring washers must be installed asshown.

Nut

Flat Washer

Saddle Body

Spring Washers for HDPE Pipe

Spring Washers



5

311 & 313 TaperSeal™ Service Saddles,Ductile IronCertified to NSF®/ANSI 61

Self energizing TaperSeal™ gasket for highsafety factor seal

Heavy threaded outletwith NPT, CC, or BSPThreads High-strength body with

pipe supporting wrap-around design

Heavy hex nut and washer

Open canted ear forease of assembly

Forged Bale

Canted ear for maximumbale bearing

Gasket cavity to fullyentrap gasket

Full Pipe SupportDesign Superiority

Service Saddle Features

FullPipe

Support

Smith-Blair® TaperSeal™ Wrap-Around ServiceSaddles are designed to provide maximum support andreinforcement to the pipe; the result of nearly 360 degreesof contact.

When installed on a pipe with an outside diameter equalto or near to the top of the saddle’s O.D. range, the saddlebody wraps around the pipe approximately 160 degrees.On a pipe that has an O.D. equal to or near to the bottom ofthe saddle’s O.D. range, the saddle body will wrap aroundthe pipe approximately 180 degrees.

As the bale bolts are tightened, tangential pull directs themechanical forces toward and around the pipe, uniformlydistributing pressure around the circumference of the pipe tosupport and reinforce it.

Sealing QualitiesSmith-Blair® Service Saddles are designed to hold high

pressures with just a few pounds of torque applied to thebale nuts. The unique, pressure-energized TaperSeal™gasket, which seals as the result of both mechanical andhydrostatic pressure, is contained within a tapered gasketcavity cast into the saddle body. This feature provides apositive hydro-mechanical seal and prevents the gasketfrom being blown out along the pipe. At the recommendedtorque on the bale nuts, Smith-Blair® Saddles are designedto hold pressures in excess of the working pressure of thepipe.

Stability of PipeThe wide skirt on Smith-Blair® TaperSeal™ Service

Saddle bodies, combined with the wrap-around feature,results in excellent stability of the saddle on the pipe. Thesetwo features work together to prevent the saddle fromrocking or creeping on the pipe, which could be caused byvibration, pressure or excessive external loading. Thismakes it possible to use single bale saddles instead ofdouble bale saddles on many installations, resulting insubstantial savings.

Single or Double BaleThe optimum number of bales needed is based on two

factors: the pipe O.D. and the outlet size. Double straps arenecessary to accommodate larger pipe O.D.’s and toequalize gasket pressure around larger outlets.

Easy to InstallFor fast, easy installation, Smith-Blair® TaperSeal™

Service Saddles feature a closed lug on one side of thebody that holds one end of the strap and its nut in place andacts as a hinge. The other side features an open canted lug,where the other end of the bale and its nut and washer canbe slipped. Thus, no loose parts get lost, and disassemblyis not required.

6

311 Service SaddlesFlexi-Coat® Epoxy, Ductile Iron Body, Single BaleCertified to NSF®/ANSI 61

Smith-Blair® 311 Single Bale Iron Service Saddles,featuring the wrap-around TaperSeal™ gasket design,provide a fast, dependable, economical method ofconnecting branch lines, instruments and otherappurtenances to pipe.

The wrap-around design and tangent bale method oftightening direct the mechanical forces toward and aroundthe pipe to reinforce it. This provides a positive seal withouta crushing action and gives the saddle excellent stability onthe pipe.

The TaperSeal™ pressure-energizing gasket is capableof containing pressures in excess of the working pressureof the pipe. The high performance characteristics of theSmith-Blair® 311 Single Bale Service Saddles make themsuitable for use on practically all installations.

In addition to their primary use of tapping pipe toprovide branch connections, they may also be used toinstall air and vacuum valves, Pitot Tubes and otherequipment and as pipe hangers or sign mounting brackets.

In unusually corrosive or aggressive environments,Smith-Blair® 315, 327, or 371 Service Saddles should beused.

Material SpecificationsBODIES: Ductile Iron ASTM-A536.BALES: Carbon Steel ASTM-A108 (C1018) or HSLA

(C111) electro-galvanized with di-chromate steel ASTM-B633.

NUTS: Cold formed semi-finished heavy hex steel A563 electro-galvanized with di-chromate seal ASTM-B633.

WASHERS: Carbon Steel ASTM-A108, electro-galvanized with a di-chromate seal ASTM-B633.

GASKET: Smith-Blair® Nitrile (Buna N) NSF 61®

compounded to resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers on applications involving chemicals.)Temperature -20•F to 180•F.

FINISH: Fusion bonded Flexi-Coat® Epoxy per AWWAC213

OPTIONAL: Stainless steel (Type 304) hardware available upon request.


In addition to service connections, Smith-Blair®Service Saddles are used on many, varied applications.

7

StandardCatalog Number

Ctn.Qty

Metric

Nom.Size

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.3/4" NPT/20 mm 1" NPT/25 mm

11-1/4-1 1/2

1.31-1.391.61-1.92

11

311-00013906-000311-00019206-000

N/A311-00019208-000

1212

25-3240

33-3541-48

11

22

2.382.35-2.56

22

311-00023806-000311-00025606-000

311-00023808-000311-00025608-000

1212

5050

6060-65

11

2-1/4-2-1/23

2.44-2.912.97-3.54

22

311-00029106-000311-00035406-000

311-00029108-000311-00035408-000

812

57-6580

62-7376-89

11

4 4.40-4.50 3 311-00045006-000 311-00045008-000 12 80-100 112-114 14 4.40-4.80 3 311-00048006-000 311-00048008-000 12 103 112-122 1

4-5 4.74-5.63 3 311-00056306-000 311-00056308-000 10 100-125 120-143 2

5-65-6

5.94-6.705.94-6.90

44

311-00066306-000311-00069006-000

311-00066308-000311-00069008-000

88

125-150125-150

151-170151-175

22

6 6.84-7.60 5 311-00076006-000 311-00076008-000 10 150 174-193 2

6-86-8

7.69-8.727.69-9.05

55

311-00087206-000311-00090506-000

311-00087208-000311-00090508-000

1010

150-200150-200

195-221195-230

22

8-1010-1212-14

8.54-10.1010.64-12.1212.62-14.32

557

311-00101006-000311-00121206-000311-00143206-000

311-00101008-000311-00121208-000311-00143208-000

1066

200-250250-300300-350

217-256271-307321-363

233

3/4” and 1” NPT Taps


Ctn.Qty

Metric

Nom.Size

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.1-1/4" NPT/32mm 1-1/2" NPT/40mm 2" NPT/50 mm

*22-1/4-2-1/2

2.35-2.562.44-2.91

23

311-00025610-000311-00029110-000

311-00025612-000311-00029112-000

N/AN/A

66

5057-65

60-6562-73

11

3 2.97-3.54 3 311-00035410-000 311-00035412-000 N/A 6 80 76-89 1

4 4.40-4.50 4 311-00045010-000 311-00045012-000 311-00045014-000 6 80-100 112-114 24 4.40-4.80 4 311-00048010-000 311-00048012-000 311-00048014-000 6 103 112-122 2

4-55-65-6

4.74-5.635.94-6.705.94-6.90

555

311-00056310-000311-00066310-000311-00069010-000

311-00056312-000311-00066312-000311-00069012-000

311-00056314-000311-00066314-000311-00069014-000

666

100-125125-150125-150

121-143151-175151-175

22

66-8*6-8

6.84-7.607.69-8.727.69-9.05

666

311-00076010-000311-00087210-000311-00090510-000

311-00076012-000311-00087212-000311-00090512-000

311-00076014-000311-00087214-000311-00090514-000

666

150150-200150-200

174-193195-221195-230

333

8-10 8.54-10.10 6 311-00101010-000 311-00101012-000 311-00101014-000 6 200-250 217-256 310-12 10.64-12.12 6 311-00121210-000 311-00121212-000 311-00121214-000 6 250-300 271-307 312-14 12.62-14.32 7 311-00143210-000 311-00143212-000 311-00143214-000 6 300-350 321-363 3

1-1/4”, 1-1/2” and 2” NPT Taps


8


Ctn.Qty

Metric

Nom.Size

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.5/8” CC/16 mm 3/4” CC/20 mm 1” CC/25 mm

11-1/4-1-1/2

1.31-1.391.61-1.92

11

311-00013905-000311-00019205-000

311-00013907-000311-00019207-000

N/A311-00019209-000

1212

2540

33-3541-48

11

22

2.382.35-2.56

22

311-00023805-000 311-00025605-000

311-00023807-000 311-00025607-000

311-00023809-000 311-00025609-000

1212

5050

6060-65

11

2-1/4-2-1/23

2.44-2.912.97-3.54

22

311-00029105-000311-00035405-000

311-00029107-000311-00035407-000

311-00029109-000311-00035409-000

812

57-6580

62-7376-89

11

4 4.40-4.50 3 311-00045005-000 311-00045007-000 311-00045009-000 12 80-100 112-115 14 4.40-4.80 4 311-00048005-000 311-00048007-000 311-00048009-000 12 103 112-122 1

4-5 4.74-5.63 3 311-00056305-000 311-00056307-000 311-00056309-000 10 100-125 121-143 25-65-6

5.94-6.705.94-6.90

44

311-00066305-000311-00069005-000

311-00066307-000311-00069007-000

311-00066309-000311-00069009-000

88

125-150125-150

151-170151-175

22

6 6.84-7.60 5 311-00076005-000 311-00076007-000 311-00076009-000 10 150 174-193 26-86-8

7.69-8.727.69-9.05

55

311-00087205-000311-00090505-000

311-00087207-000311-00090507-000

311-00087209-000311-00090509-000

1010

150-200150-200

195-221195-230

22

8-1010-1212-14

8.54-10-1010.64-12.1212.62-14.32

557

311-00101005-000311-00121205-000311-00143205-000

311-00101007-000311-00121207-000311-00143207-000

311-00101009-000311-00121209-000311-00143209-000

1066

200-250250-300300-350

217-256271-307321-363

233

5/8”, 3/4” and 1” CC taps


Ctn.Qty

Metric

Nom.Size

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.1-1/4" CC/32 mm 1-1/2" CC/40 mm

22-1/4-2-1/2

2.35-2.562.44-2.91

23

311-00025611-000 311-00029111-000

N/A311-00029113-000

66

5057-65

60-6562-73

11

3 2.97-3.54 3 311-00035411-000 311-00035413-000 6 80 76-89 14 4.40-4.50 3 311-00045011-000 311-00045013-000 6 80-100 112-115 24 4.40-4.80 4 311-00048011-000 311-00048013-000 6 103 112-122 1

4-55-65-6

4.74-5.635.94-6.705.94-6.90

55

311-00056311-000 311-00066311-000311-00069011-000

311-00056313-000 311-00066313-000311-00069013-000

666

100-125125-150125-150

121-143151-170151-175

222

66-86-8

6.84-7.607.69-8.727.69-9.05

666

311-00076011-000 311-00087211-000 311-00090511-000

311-00076013-000 311-00087213-000 311-00090513-000

666

150150-200150-200

174-193195-221195-230

333

8-10 8.54-10.10 6 311-00101011-000 311-00101013-000 6 200-250 217-256 3

10-12 10.64-12.12 6 311-00121211-000 311-00121213-000 6 250-300 271-307 3

12-14 12.62-14.32 7 311-00143211-000 311-00143213-000 6 300-350 321-363 3

1-1/4” and 1-1/2” CC Taps

Size Code Number Example

1/2"3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

59 50 51 54 52 53 55 56

3/4" BSP 311-00013950-000

BSP Thread Tap Codes


9

Smith-Blair® 313 Double Bale ServiceSaddles have the same important design featuresas the 311 Service Saddles.

The 313 is especially recommended wherelarge taps are required and where greater thannormal transverse loading on the service line isanticipated.

For unusually corrosive or aggressiveenvironments, Smith-Blair 317, 325, 327, 357 or397 Service Saddles should be used.

313 Service SaddlesFlexi-Coat® Epoxy, Ductile Iron Body, Double BaleCertified to NSF®/ANSI 61

Material SpecificationsBODIES: Ductile Iron ASTM-A536.BALES: Carbon Steel ASTM-A108 (C1018) or HSLA (C111)

electro-galvanized with di-chromate steel ASTM-B633.


WASHERS: Carbon Steel ASTM-A108, electro-galvanized with a di-chromate seal ASTM-B633.

GASKET: Smith-Blair® Nitrile (Buna N) NSF 61® compoundedto resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair® engineers on applications involving chemicals).Temperature -20•F to 180•F.

FINISH: Fusion bonded Flexi-Coat® Epoxy per AWWA C213.

OPTIONAL: Stainless steel hardware available upon request.

*Large diameter saddles (15.98-25.80) with 3” & 4” NPT taps havebales made of ASTM-A285, studs ASTM-A325 with fusion bondedFlexi-Coat® Epoxy per AWWA C213 and nuts made of carbon steelASTM-A536.



Ctn.Qty

Metric

Nom.SizeInches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm


1-1/4-1-1/22

1.61-1.922.35-2.56

33

313-00019206-000313-00025606-000

313-00019208-000313-00025608-000

66

32-4050

41-4860-65

11

2-1/4-2-1/23

3-444

2.44-2.912.97-3.543.74-4.134.40-4.504.40-4.80

34666

313-00029106-000313-00035406-000313-00041306-000313-00045006-000313-00048006-000

313-00029108-000313-00035408-000313-00041308-000313-00045008-000313-00048008-000

66666

57-6580

80-100100100

62-7376-8995-105112-114112-122

22333

4-5666

5.00-5.635.94-6.705.94-6.906.84-7.60

6667

313-00056306-000313-00066306-000313-00069006-000313-00076006-000

313-00056308-000313-00066308-000313-00069008-000313-00076008-000

6444

100-125150150150

121-143151-170151-175174-193

3333

6-86-88-10

7.69-8.727.69-9.058.54-10.10

888

313-00087206-000313-00090506-000313-00101006-000

313-00087208-000313-00090508-000313-00101008-000

444

150-200150-200200-250

195-221195-230217-256

444

1010-12

1212-1412-1414-16

10.75-11.1010.64-12.1212.75-13.2012.62-14.3214.73-15.6515.95-17.25

101014151819

313-00111006-000313-00121206-000313-00132006-000313-00143206-000313-00156506-000313-00172506-000

313-00111008-000313-00121208-000313-00132008-000313-00143208-000313-00156508-000313-00172508-000

444411

250250-300

300300-350300-350350-400

273-282271-307324-335321-363375-397406-438

447789

1616-18*18*20*24

17.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

1919202020

313-00178006-000313-00188806-000313-00195006-000313-00216006-000313-00258006-000

313-00178008-000313-00188808-000313-00195008-000313-00216008-000313-00258008-000

11111

410400-450

450500600

438-452442-479492-499547-550654-657

99999


*Fabricated Straps.

10

Standard Catalog NumberCtn.Qty

MetricNom.Size

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

1-1/4" NPT/32 mm 1-1/2" NPT/40 mm 2" NPT/50 mm 2-1/2" NPT/65 mm

2 2.35-2.56 3 313-00025610-000 313-00025612-000 N/A N/A 6 50 60-65 13

3-444

4-54-5

2.97-3.543.74-4.134.40-4.504.40-4.804.74-5.145.00-5.63

586689

313-00035410-000313-00041310-000313-00045010-000313-00048010-000313-00051410-000313-00056310-000

313-00035412-000313-00041312-000313-00045012-000313-00048012-000313-00051412-000313-00056312-000

313-00035414-000313-00041314-000313-00045014-000313-00048014-000313-00051414-000313-00056314-000

N/A313-00041316-000313-00045016-000313-00048016-000313-00051416-000313-00056316-000

666664

8080-100

100100

100-125100-125

76-8995-104112-114112-122120-130127-143

333334

666

6-86-8

5.94-6.705.94-6.906.84-7.607.69-8.727.69-9.05

9971111

313-00066310-000313-00069010-000313-00076010-000313-00087210-000313-00090510-000

313-00066312-000313-00069012-000313-00076012-000313-00087212-000313-00090512-000

313-00066314-000313-00069014-000313-00076014-000313-00087214-000313-00090514-000

313-00066316-000313-00069016-000313-00076016-000313-00087216-000313-00090516-000

44444

150150150

150-200150-200

151-170151-175174-193195-221195-230

44355

8-1010

10-1212

12-14

8.54-10.1010.75-11.1010.64-12.1212.75-13.2012.62-14.32

910111514

313-00101010-000313-00111010-000313-00121210-000313-00132010-000313-00143210-000

313-00101012-000313-00111012-000313-00121212-000313-00132012-000313-00143212-000

313-00101014-000313-00111014-000313-00121214-000313-00132014-000313-00143214-000

313-00101016-000313-00111016-000313-00121216-000313-00132016-000313-00143216-000

44444

200-250250

250-300300

300-350

217-256273-282271-307324-355321-363

44576

12-1414-16

1616-18*18*20*24

14.73-15.6515.95-17.2517.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

18191919202020

313-00156510-000313-00172510-000313-00178010-000313-00188810-000313-00195010-000313-00216010-000313-00258010-000

313-00156512-000313-00172512-000313-00178012-000313-00188812-000313-00195012-000313-00216012-000313-00258012-000

313-00156514-000313-00172514-000313-00178014-000313-00188814-000313-00195014-000313-00216014-000313-00258014-000

313-00156516-000313-00172516-000313-00178016-000313-00188816-000313-00195016-000313-00216016-000313-00258016-000

1111111

300-350350-400

410400-450

450500600

375-397406-438438-452442-479479-495547-550654-657

8999999

313 Service Saddles, Ductile Iron, Double Bale1-1/4”, 1-1/2”, 2” and 2-1/2” NPT Taps


MetricNom.Size

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

3" NPT/80 mm 4" NPT/100 mm

66

8-10

5.94-6.706.84-7.608.54-10.10

101315

313-00066317-000313-00076017-000313-00101017-000

N/A313-00076018-000313-00101018-000

443

150150

200-250

151-171174-193217-256

567

1010-12

1212-1412-14

10.75-11.1010.64-12.1212.75-13.2012.62-14.3214.73-15.65

1414181828

See 357's page 22 313-00121217-000See 357's page 22313-00143217-000313-00156517-000

See 357's page 22 313-00121218-000See 357's page 22313-00143218-000313-00156518-000

-2 -22

-250-300

-300-350300-350

-271-307

-321-363375-397

-6-813

14-1616

16-18*18

15.98-16.5917.25-17.8017.81-18.8819.38-19.68

28293030

313-00165917-000313-00178017-000313-00188817-000313-00195017-000

313-00165918-000313-00178018-000313-00188818-000313-00195018-000

1111

350-400400

400-450450

406-421439-452452-479492-500

13131314

3” and 4” NPT Taps

1/2” I.P. Taps can be accommodated by inserting a bushing in the 3/4” taps.


1/2"3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

59 50 51 54 52 53 55 56

1-1/4" NPT 313-00025610-0001-1/4" BSP 313-00025654-000



*Fabricated Straps.

*Fabricated Straps.

11


MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

5/8" CC/16 mm 3/4" CC/20 mm 1" CC/25 mm

1-1/4-1-1/22

1.61-1.922.35-2.56

33

313-00019205-000313-00025605-000

313-00019207-000313-00025607-000

313-00019209-000313-00025609-000

66

32-4050

41-4860-65

11

2-1/4-2-1/23

3-4

2.44-2.912.97-3.543.74-4.13

346

313-00029105-000313-00035405-000313-00041305-000

313-00029107-000313-00035407-000313-00041307-000

313-00029109-000313-00035409-000313-00041309-000

666

57-6380

80-100

62-7376-8995-105

223

4 4.40-4.50 6 313-00045005-000 313-00045007-000 313-00045009-000 6 100 112-114 34

4-5666

4.40-4.805.00-5.635.94-6.705.94-6.906.84-7.60

66667

313-00048005-000313-00056305-000313-00066305-000313-00069005-000313-00076005-000

313-00048007-000313-00056307-000313-00066307-000313-00069007-000313-00076007-000

313-00048009-000313-00056309-000313-00066309-000313-00069009-000313-00076009-000

66444

100100-125

150150150

112-122121-143151-170151-175174-193

33333

6-86-88-10

7.69-8.727.69-9.058.54-10.10

788

313-00087205-000313-00090505-000313-00101005-000

313-00087207-000313-00090507-000313-00101007-000

313-00087209-000313-00090509-000313-00101009-000

444

150-200150-200200-250

195-221195-230217-256

444

1010-12

1212-1412-1414-16

10.75-11.1010.64-12.1212.75-13.2012.62-14.3214.73-15.6515.95-17.25

101014151819

313-00111005-000313-00121205-000313-00132005-000313-00143205-000313-00156505-000313-00172505-000

313-00111007-000313-00121207-000313-00132007-000313-00143207-000313-00156507-000313-00172507-000

313-00111009-000313-00121209-000313-00132009-000313-00143209-000313-00156509-000313-00172509-000

444411

250250-300

300300-350300-350350-400

273-282271-307324-335321-363375-397406-438

447789

1616-18*18*20*24

17.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

1919202020

313-00178005-000313-00188805-000313-00195005-000313-00216005-000313-00258005-000

313-00178007-000313-00188807-000313-00195007-000313-00216007-000313-00258007-000

313-00178009-000313-00188809-000313-00195009-000313-00216009-000313-00258009-000

11111

410400-450

450500600

438-452442-479492-500547-550654-657

99999


Metric

Nom.Sizes Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

1-1/4" CC/32 mm 1-1/2" CC/40 mm 2" CC/50 mm

2 2.35-2.562.97-3.54

35

313-00025611-000313-00035411-000

N/A313-00035413-000

N/AN/A

66

5080

60-6576-89

12

3-44 4

4-54-56

3.74-4.134.40-4.504.40-4.804.74-5.145.00-5.635.94-6.70

866899

313-00041311-000313-00045011-000313-00048011-000313-00051411-000313-00056311-000313-00066311-000

313-00041313-000313-00045013-000313-00048013-000313-00051413-000313-00056313-000313-00066313-000

313-00041315-000313-00045015-000313-00048015-000313-00051415-000313-00056315-000313-00066315-000

666644

80-100100100

100-125100-125

150

95-104112-114112-122120-130127-143151-170

333344

66

6-86-88-10

5.94-6.906.84-7.607.69-8.727.69-9.058.54-10.10

9711119

313-00069011-000313-00076011-000313-00087211-000313-00090511-000313-00101011-000

313-00069013-000313-00076013-000313-00087213-000313-00090513-000313-00101013-000

313-00069015-000313-00076015-000313-00087215-000313-00090515-000313-00101015-000

44444

150150

150-200150-200200-250

151-175174-193195-221195-230217-256

43554

1010-12

1212-1412-1414-16

10.75-11.1010.64-12.1212.75-13.2012.62-14.3214.73-15.6515.95-17.25

101114141819

313-00111011-000313-00121211-000313-00132011-000313-00143211-000313-00156511-000313-00172511-000

313-00111013-000313-00121213-000313-00132013-000313-00143213-000313-00156513-000313-00172513-000

313-00111015-000313-00121215-000313-00132015-000313-00143215-000313-00156515-000313-00172515-000

444411

250250-300

300300-350300-350350-400

273-282271-307324-335321-363375-397406-438

556689

1616-18*18*20*24

17.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

1919202020

313-00178011-000313-00188811-000313-00195011-000313-00216011-000313-00258011-000

313-00178013-000313-00188813-000313-00195013-000313-00216013-000313-00258013-000

313-00178015-000313-00188815-000313-00195015-000313-00216015-000313-00258015-000

11111

410400-450

450500600

438-452442-479492-500547-550654-657

99999

5/8”, 3/4” and 1” CC Taps

1-1/4”, 1-1/2” and 2” CC Taps


*Fabricated Straps.

*Fabricated Straps.

12

315 & 317 TaperSeal™ Service SaddlesDuctile Iron Body with Stainless Steel StrapsCertified to NSF®/ANSI 61

It’s not just another service saddle; It’s a better one, with the perfect combination of corrosion protection

and time-proven design features to provide years of dependable service.

Full entrapment gasketcavity keeps gasketpositioned at proper

angle to provide maximum sealing action.

Self-EnergizingTaperSeal gasket forproven efficient high

safety seal.

Heavy duty threaded outletwith NPT, CC or BSP thread.

304 stainlesssteel stud, nutand washer.

High strength ductile iron saddlebody with minimum 12 mil thickcorrosion and impact resistant

epoxy coating.

Open canted earfor easy slip-on

installation.Wide stainless steel straps.Single strap 2.00” wide.Double strap 1.50” wide.

Closed canted ear actsas a hinge to hold nut,

washer and strap inplace during installation.

Nearly360o

contact for full pipe

support

13

Protection Against CorrosionSmith-Blair® Engineers have taken the industry

leading service saddle, the Smith-Blair® TaperSeal™Saddle, and given it the additional benefit of corrosionresistance without changing its superior sealing,stability and pipe supporting qualities that have made itthe preferred saddle.

Here’s what we do to make the Smith-Blair®

TaperSeal™ Service Saddle exceptionally corrosionresistant:

First, we shotblast the tough ductile iron saddle body down to bare metal;

Next, we pre-heat the saddle;

Then, we apply a heavy impact and corrosion resistant Smith-Blair® fusion bonded Flexi-Coat epoxy coating;

Next, we add job proven, self-energizing Taper-Seal™ gaskets and wide type 304 Stainless Steel Straps;

Finally, we finish it off with type 304 Stainless Steel Bolts, Nuts and Washers.

Now, that’s protection against corrosion!

The same superior sealing and pipe supportingstability on the pipe, and the same easy installationqualities you have come to know and expect from theSmith-Blair® TaperSeal™ Service Saddles, areunchanged in the new corrosion protected saddles.

Superior Sealing QualitiesSmith-Blair® TaperSeal™ Service Saddles hold high

pressure with just a few foot pounds of torque appliedto the strap nuts.

The unique, pressure-energized, TaperSeal™ gasketseals as a result of both mechanical and hydrostaticpressures and is held in position in a uniquely designedgasket cavity to provide optimum sealing efficiency. Inlaboratory testing, TaperSeal™ gaskets have been ableto withstand pressures in excess of the workingpressure of the pipe.

When properly sized from the factory, Smith-BlairTaperSeal™ Saddles meet the requirements listed in theUni-Bell PVC Pipe Association’s “Handbook of PVCPipe” and in the AWWA’s “Manual M23: PVC PipeDesign and Installation.

Nearly Full Pipe SupportWhen installed on a pipe with an O.D. near the top

of a saddle’s O.D. range, the saddle body wraps aroundapproximately 160• of the pipe.

When installed on a pipe near the bottom of thesaddle’s O.D. range, the saddle wraps aroundapproximately 180• of the pipe.

As the strap bolts are tightened, tangential pulldirects mechanical forces toward and around the pipe,uniformly distributing pressure around itscircumference, supporting it and reinforcing it without acrushing action.

Stability on the PipeThe wide skirt on Smith-Blair® TaperSeal™ Service

Saddle bodies, combined with their wide wrap-aroundstainless steel straps, provides excellent stability on thepipe. These two features work together to prevent thesaddle from rocking or creeping on the pipe, whichcould be caused by vibration, pressure or excessiveexternal loading.

Easy to InstallSmith-Blair® TaperSeal™ Service Saddles are

designed for fast, easy installation. They feature aclosed lug on one side of the saddle, which acts as ahinge and holds the bolt, nut and washer in place.

The other side features an open canted lug, wherethe other bolt, nut and washer can be slipped, withoutdisassembly. Thus, no loose parts get lost.

In addition to their primary use for tapping pipe, thesaddles may also be used to install air and vacuumvalves, pitot tubes, or other equipment. They can alsobe used as pipe hangers or sign mounting brackets.

Material SpecificationsBODIES: Ductile Iron ASTM-A536.BALES: For sizes 3.54” and smaller Type 304 Stainless

Steel.STRAPS: For sizes 4.55” and larger Type 304 Stainless

Steel. Single Strap-315 Style-2.00” wide. Double Strap-317 Style-1.50” wide.

NUTS: Type 304 Stainless Steel Fluoropolymer Coated.WASHERS: Type 304 Stainless Steel. STUDS: Type 304 Stainless Steel 5/8”.GASKET: Smith-Blair® Nitrile (Buna N) NSF 61®

compounded to resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers on applications involving chemicals).Temperature -20•F to 180•F.

FINISH: Fusion bonded Flexi-Coat® Epoxy per AWWAC213 to a minimum thickness of 12 mils.

Material Specifications subject to change.

315 & 317 TaperSeal™ Service SaddlesDuctile Iron Body with Stainless Steel StrapsCertified to NSF®/ANSI 61

14

315 Service SaddlesFlexi-Coat® Epoxy, Ductile Iron BodySingle Bale - Stainless SteelCertified to NSF®/ANSI 61


Ctn.Qty

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.5/8" CC/16 mm 3/4" CC/20 mm 1" CC/25 mm

11-1/4-1-1/2

1.31-1.391.61-1.92

11

315-00013905-000315-00019205-000

315-00013907-000315-00019207-000

N/A315-00019209-000

1212

25-3240

33-3541-48

11

222

2.132.38

2.35-2.56

222

315-00021305-000315-00023805-000315-00025605-000

315-00021307-000315-00023807-000315-00025607-000

315-00021309-000315-00023809-000315-00025609-000

121212

505050

5460

60-65

111

2-1/4-2-1/23

2.44-2.912.97-3.54

22

315-00029105-000315-00035405-000

315-00029107-000315-00035407-000

315-00029109-000315-00035409-000

812

57-6580

62-7376-89

11

4 4.40-4.50 3 315-00045005-000 315-00045007-000 315-00045009-000 12 80-100 112-114 14 4.40-4.80 4 315-00048005-000 315-00048007-000 315-00048009-000 10 100 111-122 2

4-55-6*5-6

4.74-5.635.94-6.705.94-6.90

344

315-00056305-000315-00066305-000315-00069005-000

315-00056307-000315-00066307-000315-00069007-000

315-00056309-000315-00066309-000315-00069009-000

1088

100-125125-150125-150

120-143151-170151-175

222

66-86-86-8*

6.84-7.607.66-8.087.69-8.727.69-9.05

4455

315-00076005-000315-00080805-000315-00087205-000315-00090505-000

315-00076007-000315-00080807-000315-00087207-000315-00090507-000

315-00076009-000315-00080809-000315-00087209-000315-00090509-000

10101010

150150-200150-200150-200

174-193195-205195-221195-230

2222

8-1010-12

1212-14

8.54-10.1010.64-12.1212.75-13.2012.62-14.32

5567

315-00101005-000315-00121205-000315-00132005-000315-00143205-000

315-00101007-000315-00121207-000315-00132007-000315-00143207-000

315-00101009-000315-00121209-000315-00132009-000315-00143209-000

10666

200-250250-300

300300-350

217-256271-307324-335321-363

2333

StandardCatalog Number Ctn.

Qty

MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.1-1/4" CC/32 mm 1-1/2" CC/40 mm

22-1/4-2-1/2

2.35-2.562.44-2.91

23

315-00025611-000 315-00029111-000

N/A315-00029113-000

66

5057-65

60-6562-73

11

3 2.91-2.97 3 315-00035411-000 315-00035413-000 6 80 74-75 14 4.40-4.50 4 315-00045011-000 315-00045013-000 6 100 112-114 24 4.40-4.80 4 315-00048011-000 315-00048013-000 6 100 112-122 2

4-55-65-6*

4.74-5.635.94-6.705.94-6.90

555

315-00056311-000 315-00066311-000315-00069011-000

315-00056313-000315-00066313-000315-00069013-000

666

100-125125-150125-150

121-143151-170151-175

222

66-86-86-8*

6.84-7.607.66-8.087.69-8.727.69-9.05

6666

315-00076011-000 315-00080811-000 315-00087211-000 315-00090511-000

315-00076013-000315-00080813-000315-00087213-000315-00090513-000

6666

150150-200150-200150-200

174-193195-205195-221195-230

3333

8-1010-12

1212-14

8.54-10.1010.64-12.1212.75-13.2012.62-14.32

6666

315-00101011-000 315-00121211-000 315-00132011-000 315-00143211-000

315-00101013-000315-00121213-000315-00132013-000315-00143213-000

6666

200-250250-300

300300-350

217-256271-307324-335321-363

3333

5/8”, 3/4” and 1” CC Taps

1-1/4” and 1-1/2” CC Taps

*Sized for use on C900 PVC pipe.

When properly sized from the factory, this product meets the requirements listed in the Uni-Bell PVC PipeAssociation’s “Handbook of PVC Pipe” and in the AWWA’s “Manual M23: PVC Pipe Design and Installation.”

15


MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

3/4" NPT/20 mm 1" NPT/25 mm

11-1/14-1-1/2

1.31-1.391.61-1.92

11

315-00013906-000315-00019206-000

N/A315-00019208-000

1212

25-3240

33-3541-48

11

222

2.132.38

2.35-2.56

222

315-00021306-000315-00023806-000315-00025606-000

315-00021308-000315-00023808-000315-00025608-000

121212

505050

5460

60-65

111

2-1/4-2-1/23

2.44-2.912.97-3.54

22

315-00029106-000315-00035406-000

315-00029108-000315-00035408-000

812

57-6580

62-7376-89

11

4 4.40-4.50 3 315-00045006-000 315-00045008-000 12 100 112-114 14 4.40-4.80 4 315-00048006-000 315-00048008-000 10 100 112-122 2

4-5 4.74-5.63 3 315-00056306-000 315-00056308-000 10 100-125 121-143 2*5-65-6

5.94-6.705.94-6.90 4 315-00066306-000

315-00069006-000315-00066308-000315-00069008-000

88

125-150125-150

151-170151-175

22

6 6.84-7.60 5 315-00076006-000 315-00076008-000 8 150 174-193 26-86-8*6-8

7.66-8.087.69-8.727.69-9.05

555

315-00080806-000315-00087206-000315-00090506-000

315-00080808-000315-00087208-000315-00090508-000

101010

150-200150-200150-200

195-205195-221195-230

222

8-1010-12

1212-14

8.54-10.1010.64-12.1212.75-13.2012.62-14.32

5555

315-00101006-000315-00121206-000315-00132006-000315-00143206-000

315-00101008-000315-00121208-000315-00132008-000315-00143208-000

10666

200-250250-300

300300-350

217-256271-307324-335321-363

2333


MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

1-1/4" NPT/32 mm 1-1/2" NPT/40 mm 2" NPT/50 mm

22-1/4-2-1/2

2.35-2.562.44-2.91

23

315-00025610-000315-00029110-000

315-00025612-000315-00029112-000

N/AN/A

66

5057-65

60-6562-73

11

3 2.97-3.54 3 315-00035410-000 315-00035412-000 N/A 6 80 76-89 14 4.40-4.50 4 315-00045010-000 315-00045012-000 315-00045014-000 6 100 112-114 24 4.40-4.80 4 315-00048010-000 315-00048012-000 315-00048014-000 6 100 112-122 2

4-5*5-65-6

4.74-5.635.94-6.705.94-6.90

533

315-00056310-000315-00066310-000315-00069010-000

315-00056312-000315-00066312-000315-00069012-000

315-00056314-000315-00066314-000315-00069014-000

666

100-125125-150125-150

121-143151-170151-175

222

66-86-8*6-8

6.84-7.607.66-8.087.69-8.727.69-9.05

6666

315-00076010-000315-00080810-000315-00087210-000315-00090510-000

315-00076012-000315-00080812-000315-00087212-000315-00090512-000

315-00076014-000315-00080814-000315-00087214-000315-00090514-000

6666

150150-200150-200150-200

174-193195-205195-221195-230

3333

8-1010-12

1212-14

8.54-10.1010.64-12.1212.75-13.2012.62-14.32

6667

315-00101010-000315-00121210-000315-00132010-000315-00143210-000

315-00101012-000315-00121212-000315-00132012-000315-00143212-000

315-00101014-000315-00121214-000315-00132014-000315-00143214-000

6666

200-250250-300

300300-350

217-256271-307324-335321-363

3333


1-1/4”, 1-1/2” and 2” NPT Taps




1/2"3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

59 50 51 54 52 53 55 56

3/4" NPT 315-00013906-0003/4" BSP 315-00013950-000


315 Service SaddlesFlexi-Coat® Epoxy, Ductile Iron BodySingle Strap - Stainless SteelCertified to NSF®/ANSI 61

16

Standard Catalog Number Ctn.Qty

MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm


1-1/4-1-1/22

1.61-1.922.35-2.56

33

317-00019205-000317-00025605-000

317-00019207-000317-00025607-000

317-00019209-000317-00025609-000

66

32-4050

41-4860-65

11

2-1/4-2-1/23

3-4

2.44-2.912.97-3.543.74-4.13

346

317-00029105-000317-00035405-000317-00041305-000

317-00029107-000317-00035407-000317-00041307-000

317-00029109-000317-00035409-000317-00041309-000

666

57-6580

80-100

62-7376-8995-105

223

*4*44-5*6*66

4.40-4.504.40-4.805.00-5.635.94-6.705.94-6.906.84-7.60

666667

317-00045005-000317-00048005-000317-00056305-000317-00066305-000317-00069005-000317-00076005-000

317-00045007-000317-00048007-000317-00056307-000317-00066307-000317-00069007-000317-00076007-000

317-00045009-000317-00048009-000317-00056309-000317-00066309-000317-00069009-000317-00076009-000

666444

100100

100-125150150150

112-114112-122121-143151-170151-175174-193

333333

6-8*6-88-10*10

7.69-8.727.69-9.058.54-10.1010.75-11.10

8889

317-00087205-000317-00090505-000317-00101005-000317-00111005-000

317-00087207-000317-00090507-000317-00101007-000317-00111007-000

317-00087209-000317-00090509-000317-00101009-000317-00111009-000

4444

150-200150-200200-250

250

195-221195-230217-256273-282

4444

*10-12*12

12-1412-1414-16

10.64-12.1212.75-13.2012.62-14.3214.73-15.6515.95-17.25

1010151819

317-00121205-000317-00132005-000317-00143205-000317-00156505-000317-00172505-000

317-00121207-000317-00132007-000317-00143207-000317-00156507-000317-00172507-000

317-00121209-000317-00132009-000317-00143209-000317-00156509-000317-00172509-000

4441 1

250-300300

300-350300-350350-400

271-307324-335321-363375-397406-438

47789

1616-18*18*2024

17.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

1919191930

317-00178005-000317-00188805-000317-00195005-000317-00216005-000317-00258005-000

317-00178007-000317-00188807-000317-00195007-000317-00216007-000317-00258007-000

317-00178009-000317-00188809-000317-00195009-000317-00216009-000317-00258009-000

11111

410400-450

450500600

438-452442-479492-500547-550654-657

99999


MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

1-1/4" CC/32 mm 1-1/2" CC/40 mm 2" CC/50 mm

23

2.35-2.562.97-3.54

35

317-00025611-000317-00035411-000

N/A317-00035413-000

N/AN/A

66

5080

60-6576-89

12

3-4*4*44-54-5*6

3.74-4.134.40-4.504.40-4.805.00-5.145.00-5.635.94-6.70

899 999

317-00041311-000317-00045011-000317-00048011-000 317-00051411-000317-00056311-000317-00066311-000

317-00041313-000317-00045013-000317-00048013-000317-00051413-000317-00056313-000317-00066313-000

317-00041315-000317-00045015-000317-00048015-000317-00051415-000317-00056315-000317-00066315-000

666664

80-100100100

100-125100-125

150

95-105112-114112-122 120-130121-143151-170

3 33344

*66

6-8*6-88-10*10

5.94-6.906.84-7.607.69-8.727.64-9.058.54-10.1010.75-11.10

981111911

317-00069011-000317-00076011-000317-00087211-000317-00090511-000317-00101011-000317-00111011-000

317-00069013-000317-00076013-000317-00087213-000317-00090513-000317-00101013-000317-00111013-000

317-00069015-000317-00076015-000317-00087215-000317-00090515-000317-00101015-000317-00111015-000

444444

150150

150-200150-200200-250

250

151-175174-193195-221195-230217-256273-282

445544

10-12*12

12-14

10.64-12.1212.75-13.2012.62-14.32

111414

317-00121211-000317-00132011-000317-00143211-000

317-00121213-000317-00132013-000317-00143213-000

317-00121215-000317-00132015-000317-00143215-000

444

250-300300

300-350

271-307324-335321-363

566

12-1414-16

1616-18*18*2024

14.73-15.6515.95-17.2517.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

1819 1919191930

317-00156511-000317-00172511-000 317-00178011-000317-00188811-000317-00195011-000317-00216011-000317-00258011-000

317-00156513-000317-00172513-000317-00178013-000317-00188813-000317-00195013-000317-00216013-000317-00258013-000

317-00156515-000317-00172515-000317-00178015-000317-00188815-000317-00195015-000317-00216015-000317-00258015-000

11 11111

300-350350-400

410400-450

450500600

375-397406-438438-452442-479492-500547-500654-657

89 99999

5/8”, 3/4” and 1” CC Taps

1-1/4”, 1-1/2” and 2” CC Taps

*Sized for Use on C900 PVC pipe.

317 Service SaddlesFlexi-Coat® Epoxy, Ductile Iron BodyDouble Strap - Stainless SteelCertified to NSF®/ANSI 61

17


MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

3/4" NPT/20 mm 1" NPT/25 mm

1-1/4-1-1/22

1.61-1.922.35-2.56

33

317-00019206-000317-00025606-000

317-00019208-000317-00025608-000

66

32-4050

41-4860-65

11

2-1/4-2-1/23

3-4

2.44-2.912.97-3.543.74-4.13

346

317-00029106-000317-00035406-000317-00041306-000

317-00029108-000317-00035408-000317-00041308-000

666

57-6580

80-100

62-7376-8995-105

223

*4 4.40-4.50 6 317-00045006-000 317-00045008-000 6 100 112-114 3*44-5*6*66

4.40-4.805.00-5.635.94-6.705.94-6.906.84-7.60

66667

317-00048006-000317-00056306-000317-00066306-000317-00069006-000317-00076006-000

317-00048008-000317-00056308-000317-00066308-000317-00069008-000317-00076008-000

66644

100100-125

150150150

112-122121-143151-170151-175174-193

33333

6-8*6-88-10

7.69-8.727.69-9.058.54-10.10

888

317-00087206-000317-00090506-000317-00101006-000

317-00087208-000317-00090508-000317-00101008-000

444

150-200150-200200-250

195-221195-230217-256

444

*1010-12*12

12-1412-1414-16

10.75-11.1010.64-12.1212.75-13.2012.62-14.3214.73-15.6515.95-17.25

9109151819

317-00111006-000317-00121206-000317-00132006-000317-00143206-000317-00156506-000317-00172506-000

317-00111008-000317-00121208-000317-00132008-000317-00143208-000317-00156508-000317-00172508-000

444411

250250-300

300300-350300-350350-400

273-282271-307324-335321-363375-397406-438

446789

1616-18*18*2024

17.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

1919191930

317-00178006-000317-00188806-000317-00195006-000317-00216006-000317-00258006-000

317-00178008-000317-00188808-000317-00195008-000317-00216008-000317-00258008-000

11111

410400-450

450500600

438-452442-479492-500547-550654-657

99999


MetricNom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

1-1/4" NPT/32 mm1-1/2" NPT/40 mm 2" NPT/50 mm 2-1/2" NPT/65 mm

23

2.35-2.562.97-3.54

35

317-00025610-000317-00035410-000

317-00025612-000317-00035412-000

N/A317-00035414-000

N/AN/A

66

5080

60-6576-89

12

3-4*4*44-54-56

3.74-4.134.40-4.504.40-4.804.74-5.145.00-5.636.94-6.70

866699

317-00041310-000317-00045010-000317-00048010-000317-00051410-000317-00056310-000317-00066310-000

317-00041312-000317-00045012-000317-00048012-000317-00051412-000317-00056312-000317-00066312-000

317-00041314-000317-00045014-000317-00048014-000317-00051414-000317-00056314-000317-00066314-000

317-00041316-000317-00045016-000317-00048016-000317-00051416-000317-00056316-000317-00066316-000

666644

80-100100100100

100-125150

95-105112-114112-122 120-130121-143151-170

333344

*66

6-8*6-88-10

5.94-6.906.84-7.607.69-8.727.69-9.058.54-10.10

9711119

317-00069010-000317-00076010-000317-00087210-000317-00090510-000317-00101010-000

317-00069012-000317-00076012-000317-00087212-000317-00090512-000317-00101012-000

317-00069014-000317-00076014-000317-00087214-000317-00090514-000317-00101014-000

317-00069016-000317-00076016-000317-00087216-000317-00090516-000317-00101016-000

44444

150150

150-200150-200200-250

151-175174-193195-221195-230217-256

43554

*1010-12*12

12-14

10.75-11.1010.64-12.1212.75-13.2012.62-14.32

911914

317-00111010-000317-00121210-000317-00132010-000317-00143210-000

317-00111012-000317-00121212-000317-00132012-000317-00143212-000

317-00111014-000317-00121214-000317-00132014-000317-00143214-000

317-00111016-000317-00121216-000317-00132016-000317-00143216-000

4444

250250-300

300300-350

273-282271-307324-335321-363

5566

12-1414-16

1616-18*18*2024

14.73-15.6515.95-17.2517.25-17.8017.40-18.8819.38-19.6821.55-21.6525.75-25.85

18191919191930

317-00156510-000317-00172510-000317-00178010-000317-00188810-000317-00195010-000317-00216010-000317-00258010-000

317-00156512-000317-00172512-000317-00178012-000317-00188812-000317-00195012-000317-00216012-000317-00258012-000

317-00156514-000317-00172514-000317-00178014-000317-00188814-000317-00195014-000317-00216014-000317-00258014-000

317-00156516-000317-00172516-000317-00178016-000317-00188816-000317-00195016-000317-00216016-000317-00258016-000

1111111

300-350350-400

410400-450

450500600

375-397406-438438-452442-479492-500547-500654-657

89 99999

1-1/4”, 1-1/2”, 2” and 2-1/2” NPT Taps




18


Ctn.Qty

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.3" NPT/80 mm 4" NPT/100 mm

68-10

6.84-7.608.54-10.10

1315

317-00076017-000317-00101017-000

317-00076018-000317-00101018-000

23

150200-250

174-193217-256

67

*1010-12*12

12-14

10.75-11.1010.64-12.1212.75-13.2012.62-14.32

14141818

See 357's page 22317-00121217-000See 357's page 22317-00143217-000

See 357's page 22317-00121218-000See 357's page 22317-00143218-000

-2-2

-250-300

-300-350

-271-307

-321-363

-6- 8



Certified toANSI/NSF 61

Smith-Blair®’s unique, pressure-energized TaperSeal™ gaskets holdhigh pressures with just a few foot pounds of torque, to provideoptimum sealing efficiency.



1/2"3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

59 50 51 54 52 53 55 56

3" NPT 317-00076017-0003" BSP 317-00076056-000



19

331 Repair Service SaddleDuctile Iron Body, Double BaleCertified to NSF®/ANSI 61

Material SpecificationsBODIES: Ductile Iron ASTM-A536.BALES: Carbon Steel ASTM-A108 (C1018) or HSLA (C111)

electro-galvanized with di-chromate seal ASTM-B633.


WASHERS: Carbon Steel ASTM-A108, electro-galvanizedwith a di-chromate seal ASTM-B633.

STUDS: Type 304 Stainless Steel 5/8”.


compounded to resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers on applications involving chemicals).Temperature -20•F to 180•F.

FINISH: Fusion bonded Flexi-Coat® Epoxy per AWWAC213.


Smith-Blair® 331 Double Bale Repair ServiceSaddles provide an excellent way to both repair andrestore a damaged branch connection in one operation.They can also be used on new installations where a largesaddle boss and gasket are desired.

331 Repair Service Saddles are available in 4” through12” (100-300 mm) nominal sizes to fit all classes of castiron pipe and all class 100, all class 150 and most class200 asbestos cement pipe.

Threaded outlets are available in sizes 3/4” through 2”NPT (19-50 mm), and 5/8” through 1-1/2” CC (15-38 mm)and BSP.

The Repair Service Saddles’ wrap-around design andtangent-strap method of tightening, direct the mechanicalforces toward and around the pipe to reinforce it, toprovide a positive seal without crushing action and to givethe saddle excellent stability on the pipe.

The 6-1/4” (158 mm) diameter concentric-ribbedgasket conforms to pipe surface irregularities to ensure apositive, dependable, seal of damaged areas up to 4-1/4”(108 mm) in diameter.

Pulled out, broken off or badly damaged direct taps.

Stripped threads when making direct taps.

Cracked pipe from over-tightening direct taps.

Corrosion or electrolysis caused leaks at direct taps.

New installations where a wide gasket coverage is desired.Large 6-1/4” diameter gasket

Applications

Double Purpose Saddle

Damaged or pulled out branch connection.

Repair service saddle with corporation stop installed.

Complete repair with tap ready to restore branch connection.

20


Ctn.Qty

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm


4 4.79-5.32 7 331-00053206-000 331-00053208-000 4 100 122-135 3

6 6.90-7.40 8 331-00074006-000 331-00074008-000 4 150 175-188 4

8 9.00-9.63 10 331-00096306-000 331-00096308-000 4 200 229-244 4

10 11.04-12.12 13 331-00121206-000 331-00121208-000 4 250 281-307 6

12 13.14-14.38 15 331-00143806-000 331-00143808-000 4 300 334-365 7


Qty

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.1-1/4" NPT/32 mm 1-1/2" NPT/32 mm 2" NPTC/50 mm

4 4.79-5.32 7 331-00053210-000 331-00053212-000 331-00053214-000 4 100 122-135 3

6 6.90-7.40 8 331-00074010-000 331-00074012-000 331-00074014-000 4 150 175-188 4

8 9.00-9.63 10 331-00096310-000 331-00096312-000 331-00096314-000 4 200 229-244 4

10 11.04-12.12 13 331-00121210-000 331-00121212-000 331-00121214-000 4 250 281-307 6

12 13.14-1438 15 331-00143810-000 331-00143810-000 331-00143814-000 4 300 334-365 7


1-1/4”, 1-1/2” and 2” NPT Taps


21


Ctn.Qty

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm


4 4.79-5.32 7 331-00053205-000 331-00053207-000 331-00053209-000 4 100 122-135 3

6 6.90-7.40 8 331-00074005-000 331-00074007-000 331-00074009-000 4 150 175-188 4

8 9.00-9.63 10 331-00096305-000 331-00096307-000 331-00096309-000 4 200 229-244 4

10 11.04-12.12 13 331-00121205-000 331-00121207-000 331-00121209-000 4 250 281-307 6

12 13.14-14.38 15 331-00143805-000 331-00143807-000 331-00143809-000 4 300 334-365 7


Qty

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.1 1/4" CC/16 mm 1 1/2" CC/20 mm

4 4.79-5.32 7 331-00053211-000 331-00053213-000 4 100 122-135 3

6 6.90-7.40 8 331-00074011-000 331-00074013-000 4 150 175-188 4

8 9.00-9.63 10 331-00096311-000 331-00096313-000 4 200 229-244 4

10 11.04-12.12 13 331-00121211-000 331-00121213-000 4 250 281-307 6

12 13.14-14.38 15 331-00143811-000 331-00143813-000 4 300 334-365 7

5/8”, 3/4” and 1” CC Taps

1-1/4” and 1-1/2” CC Taps


1/2"3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

59 50 51 54 52 53 55 56

3/4" CC 331-00053207-0003/4" BSP 331-00053250-000



22

Corrosion-protectedbranch lines

when and where you need them.

Convenient...Efficient...

Economical...Smith-Blair® 357 Flexi-Coat® EpoxyCoated Service Saddles give you a perfect combination of corrosionprotection and proven on-the-jobefficiency.

With Smith-Blair® 357 Flexi-Coat® Epoxy CoatedService Saddles, it isn’t necessary to decide exactlywhere branch lines are needed when you are planningdistribution lines or doing the initial installation of apipeline. You can install long runs of pipe without thecomplexities of cutting and fitting and then go back laterand easily install corrosion protected branch lines exactlywhere you need them.

The 357 Saddles’ contoured, epoxy coated, toughductile iron body and 2” wide 304 Stainless Steel Strapscompletely encompass the pipe, reinforcing andsupporting it at each outlet.

Each saddle is geometrically shaped to provideuniform gasket pressure on the pipe. The Smith-Blair®

Nitrile (Buna N) pressure energized concave wedgegasket provides an efficient seal with no rolling or bindingon installation.

Taps can be made dry or under pressure. On emptylines, the proper size hole can be cut first and the saddleinstalled later. On pressurized lines, with the propertapping equipment, the saddle must be installed first andthe hole tapped second.

Why not install your next pipeline the smart way?Protect it from corrosion before it eats away your tight fit.Use Smith-Blair® 357 Service Saddles!

Material SpecificationsBODIES: Ductile Iron ASTM-A536.BANDS: Type 304 Stainless Steel.

GASKET: Smith-Blair® Nitrile (Buna N) NSF 61® concavewedge gasket. Compounded to resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engin-eers on applications involving chemicals).Temperature -20•F to 180•F.

FINISH: Fusion bonded Flexi-Coat® Epoxy per AWWAC213 to a minimumthickness of 12 mils.

STUD: Type 304 Stainless Steel.

NUTS &WASHERS: Type 304 Stainless Steel.


357 Service Saddles for Plastic or Steel Pipe Flexi-Coat® Epoxy, Ductile Iron Body, Stainless Steel StrapsCertified to NSF®/ANSI 61


23

Standard

Catalog Number

Metric

Nom.Sizes

Inches

O.D.RangeInches

Wt.EachLbs.

TapSize

Inches

Nom.Sizemm

O.D.Range

mm

Wt.Eachkg.

6 6.63-6.90 1212

34

357-00069017-000357-00069018-000 150 168-175 6

6

8 8.63-9.05 1313

34

357-00090517-000357-00090518-000 200 219-230 6

6

10 10.75-11.10 1414

34

357-00111017-000357-00111018-000 250 273-282 6

6

12 12.75-13.20 1414

34

357-00132017-000357-00132018-000 300 323-335 6

6


3” or 4” NPTthreaded outlet

Roll resistant, selfenergizing, concavewedge gasket forefficient seal on pipe.

2” wide Type 304stainless steel corrosion resistantstrap to reinforce the pipe and maintainefficient pressure on the saddle gasket.

High-strengthductile ironsaddle body withheavy, minimum12 mil. corrosionand impactresistant fusionbonded Flexi-Coat® epoxycoating perAWWA C213.

Type 304Stainless SteelStuds.

Type 304 StainlessSteel nuts andwashers. Nutsfluoropolymed coated.


357 Service Saddles for 6”-12” Plastic or Steel Pipe Flexi-Coat® Epoxy Body, Stainless Steel StrapsCertified to NSF®/ANSI 61 Not For Ductile Iron Pipe

24

Smith-Blair® 362 Service Saddles are designedspecifically for making taps into concrete cylinder andconcrete steel pipe to connect branch lines or otherappurtenances.

Sizes are available to fit 12” through 36” (300-900 mm)nominal pipe size. Threaded outlets are available in sizes3/4” through 2” NPT (20-50 mm) and 3/4” through 2” CC (20-50 mm).

When installed, the 362 saddle body and straps havealmost 360• contact with the pipe. The wide steel strapsdistribute the tightening load to support and reinforce thepipe.

The unique Twist-Lock tapped insert can accommodateup to 1-1/2” (40 mm) variation in the thickness of theconcrete coating.

The large “O”-Ring gasket, glued into the tapped insert,ensures a safe, dependable seal against the steel cylinder.

Hemispherical washers provide full bearing for the strapnuts and align the straps with the saddle body. A groutopening is provided in the saddle body alongside the tappedinsert for restoring the concrete coating after the tap iscompleted.

In addition to their use for installing branch connections,Smith-Blair® 362 Service Saddles are widely used forinstalling air and vacuum valves, pitot tubes and similarequipment in transmission lines.

Material SpecificationsBODIES: Ductile Iron ASTM-A536.TAPPED INSERT: Ductile Iron ASTM-A536. Tap threads

are full and free from shear, conform to AWWA standards.

HEMISPHERICALWASHERS: Ductile Iron ASTM-A536.


concave wedge gasket. Compoundedto resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers on applications involving chemicals). Temperature -20•F to 180•F.

STRAPS: Carbon steel ASTM-A285, Fusion bonded Flexi Coat® Epoxy coating.Optional: Stainless Steel.

STUD: High strength low alloy.

NUTS &WASHERS: Type 304 Stainless Steel.



Unique “Twist-Lock” Adjustable Tapped Insert

“O” Ring Recess

Insert in “Hi” Position

Insert in “Lo” Position

“O”-Ring Seal cemented in place for easy installation.

High Position with fingers engaged for normal coating thickness.

Low Position with fingers bearing against saddle to allow for greater than normal coating thickness.

362 Service Saddles for Concrete Cylinder PipeDuctile Iron Body, Double StrapCertified to NSF®/ANSI 61

25

Note: Other sizes available upon request.

NPT Taps

CC TapsNom.Pipe

Size In.

SteelCyl. O.D.Inches

ConcreteCoating O.D.Range Inches

Wt.Ea.Lbs.

Catalog Number

3/4" CC/20 mm 1" CC/25 mm 1-1/4" CC/32 mm 1-1/2" CC/40 mm 2" CC/50 mm1214

13-5/815-3/4

15.38-15.8817.25-18.00

2424

362-00158807-000362-00180007-000

362-00158809-000362-00180009-000

362-00158811-000362-00180011-000

362-00158813-000362-00180013-000

362-00158815-000362-00180015-000

16182021

17-3/8192122

19.38-19.8821.75-22.3823.75-24.3824.75-25.50

26263131

362-00198807-000362-00223807-000362-00243807-000362-00255007-000

362-00198809-000362-00223809-000362-00243809-000362-00255009-000

362-00198811-000362-00223811-000362-00243811-000362-00255011-000

362-00198813-000362-00223813-000362-00243813-000362-00255013-000

362-00198815-000362-00223815-000362-00243815-000362-00255015-000

242730

25-3/428

31-7/8

27.88-28.5030.75-31.5034.13-34.88

333537

362-00285007-000362-00315007-000362-00348807-000

362-00285009-000362-00315009-000362-00348809-000

362-00285011-000362-00315011-000362-00348811-000

362-00285013-000362-00315013-000362-00348813-000

362-00285015-000362-00315015-000362-00348815-000

3336

34-7/837-7/8

37.13-37.3840.25-41.00

3840

362-00373807-000362-00420007-000

362-00373809-000362-00420009-000

362-00373811-000362-00410011-000

362-00373813-000362-00410013-000

362-00373815-000362-00410015-000

Size Code Number3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

50 51 54 52 53 55 56

Example3/4" CC 362-00158807-0003/4" BSP 362-00158850-000


Size Code Number3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

50 51 54 52 53 55 56

Example3/4" NPT 362-00158806-0003/4" BSP 362-00158850-000


362 Service Saddles for Concrete Cylinder PipeDuctile Iron Body, Double StrapCertified to NSF®/ANSI 61

Nom.Pipe

Size In.

SteelCyl. O.D. Inches

ConcreteCoating O.D. Range Inches

Wt.Ea.Lbs.

Catalog Number

3/4" NPT/20 mm 1" NPT/25 mm 1-1/4" NPT/32 mm 1-1/2" NPT/40 mm 2" NPT/50 mm1214

13-3/815 1/4

15.38-15.8817.25-18.00

2324

362-00158806-000362-00180006-000

362-00158808-000362-00180008-000

362-00158810-000362-00180010-000

362-00158812-000362-00180012-000

362-00158814-000362-00180014-000

16182021

17-3/8192122

19.38-19.8821.75-22.3823.75-24.3824.75-25.50

26263131

362-00198806-000362-00223806-000362-00243806-000362-00255006-000

362-00198808-000362-00223808-000362-00243808-000362-00255008-000

362-00198810-000362-00223810-000362-00243810-000362-00255010-000

362-00198812-000362-00223812-000362-00243812-000362-00255012-000

362-00198814-000362-00223814-000362-00243814-000362-00255014-000

242730

25-3/428

31-7/8

27.88-28.5030.75-31.5034.13-34.88

333536

362-00285006-000362-00315006-000362-00348806-000

362-00285008-000362-00315008-000362-00348808-000

362-00285010-000362-00315010-000362-00348810-000

362-00285012-000362-00315012-000362-00348812-000

362-00285014-000362-00315014-000362-00348814-000

3336

34-7/837-7/8

37.13-37.3840.25-41.00

3840

362-00373806-000362-00410006-000

362-00373808-000362-00410008-000

362-00373810-000362-00410010-000

362-00373812-000362-00410012-000

362-00373814-000362-00410014-000

26

Smith-Blair® 366 Service Saddles are designed foruse on large diameter cast iron, asbestos cement, steel,concrete, or PVC pipe.

Sizes are available to fit 19.25” O.D. through 43.15”O.D. (489-1,096 mm) pipe sizes. Threaded outlets areavailable in sizes 3/4” through 2-1/2” NPT (20-65 mm) and3/4” through 2” CC (20-50 mm) and BSP.

When installed, the saddle body and straps havealmost 360• contact with the pipe. Wide steel strapsdistribute the tightening load to support and reinforce pipe.

The large “O”-Ring gasket, glued into the tapped insert,ensures a dependable seal on all pipe surfaces.Hemispherical washers provide full bearing for the strapnuts and align the straps with the saddle body.

In addition to their primary use of installing branch line,Smith-Blair® 366 Service Saddles are widely used to installair and vacuum valves, pitot tubes and similarappurtenances on transmission lines.

Material SpecificationsSADDLE BODIES: Ductile Iron ASTM-A536.TAPPED INSERT: Ductile Iron ASTM-A536. Tap threads are

full and free from shear, conform to AWWA standards.

HEMISPHERICALWASHERS: Ductile Iron ASTM-A536


concave wedge gasket. Compoundedto resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers on applications involving chemicals).Temperature -20•F to 180•F.

STRAPS: Carbon steel ASTM-A285, Fusion bonded FlexiCoat® Epoxy coating.Optional: Stainless Steel

STUD: High strength low alloy.

NUTS: Carbon Steel ASTM-A563. Optional: Stainless Steel.



366 Service Saddle mounted on 30” cast iron pipe toprovide a 2” outlet.

View of the underside of the saddle showing tapped boss inposition and glued in “O”-Ring captivated by stop ring oninsert.

366 Service Saddles for Large Diameter PipeDuctile Iron Body, Triple StrapCertified to NSF®/ANSI 61

When installed, the saddle body and straps havealmost 360• contact with the pipe.

27

O.D.Inches

Wt.Ea.Lbs.

Catalog Number

3/4 NPT/20 mm 1" NPT/25 mm 1-1/4" NPT/32 mm 1-1/2" NPT/40 mm 2" NPT/50 mm 2-1/2" NPT/65 mm

19.25-20.0019.75-20.5020.50-21.2521.35-22.10

38383839

366-00200006-000366-00205006-000366-00212506-000366-00221006-000

366-00200008-000366-00205008-000366-00212508-000366-00221008-000

366-00200010-000366-00205010-000366-00212510-000366-00221010-000

366-00200012-000366-00205012-000366-00212512-000366-00221012-000

366-00200014-000366-00205014-000366-00212514-000366-00221014-000

366-00200016-000366-00205016-000366-00212516-000366-00221016-000

21.81-22.5622.50-23.2523.19-23.9423.75-24.50

39393942

366-00225606-000366-00232506-000366-00239406-000366-00245006-000

366-00225608-000366-00232508-000366-00239408-000366-00245008-000

366-00225610-000366-00232510-000366-00239410-000366-00245010-000

366-00225612-000366-00232512-000366-00239412-000366-00245012-000

366-00225614-000366-00232514-000366-00239414-000366-00245014-000

366-00225616-000366-00232516-000366-00239416-000366-00245016-000

24.50-25.2525.55-26.3226.07-26.8226.65-27.50

42444444

366-00252506-000366-00263206-000366-00268206-000366-00275006-000

366-00252508-000366-00263208-000366-00268208-000366-00275008-000

366-00252510-000366-00263210-000366-00268210-000366-00275010-000

366-00252512-000366-00263212-000366-00268212-000366-00275012-000

366-00252514-000366-00263214-000366-00268214-000366-00275014-000

366-00252516-000366-00263216-000366-00268216-000366-00275016-000

27.51-28.2528.75-29.5029.53-30.2829.75-30.50

45454747

366-00282506-000366-00295006-000366-00302806-000366-00305006-000

366-00282508-000366-00295008-000366-00302808-000366-00305008-000

366-00282510-000366-00295010-000366-00302810-000366-00305010-000

366-00282512-000366-00295012-000366-00302812-000366-00305012-000

366-00282514-000366-00295014-000366-00302814-000366-00305014-000

366-00282516-000366-00295016-000366-00302816-000366-00305016-000

31.49-32.2431.75-32.5032.49-33.2433.21-33.96

49494949

366-00322406-000366-00325006-000366-00332406-000366-00339606-000

366-00322408-000366-00325008-000366-00332408-000366-00339608-000

366-00322410-000366-00325010-000366-00332410-000366-00339610-000

366-00322412-000366-00325012-000366-00332412-000366-00339612-000

366-00322414-000366-00325014-000366-00332414-000366-00339614-000

366-00322416-000366-00325016-000366-00332416-000366-00339616-000

34.90-35.6535.67-36.4236.49-37.2436.97-37.72

52525454

366-00356506-000366-00364206-000366-00372406-000366-00377206-000

366-00356508-000366-00364208-000366-00372408-000366-00377208-000

366-00356510-000366-00364210-000366-00372410-000366-00377210-000

366-00356512-000366-00364212-000366-00372412-000366-00377212-000

366-00356514-000366-00364214-000366-00372414-000366-00377214-000

366-00356516-000366-00364216-000366-00372416-000366-00377216-000

37.71-38.4638.45-39.2039.35-40.1039.81-40.5641.95-42.70

5454565656

366-00384606-000366-00392006-000366-00401006-000366-00405606-000366-00427006-000

366-00384608-000366-00392008-000366-00401008-000366-00405608-000366-00427008-000

366-00384610-000366-00392010-000366-00401010-000366-00405610-000366-00427010-000

366-00384612-000366-00392012-000366-00401012-000366-00405612-000366-00427012-000

366-00384614-000366-00392014-000366-00401014-000366-00405614-000366-00427014-000

366-00384616-000366-00392016-000366-00401016-000366-00405616-000366-00427016-000

42.40-43.15 57 366-00431506-000 366-00431508-000 366-00431510-000 366-00431512-000 366-00431514-000 366-00431516-000

3/4”, 1”, 1-1/4”, 2” and 2-1/2” NPT Taps

Use Smith-Blair 600 Series Tapping Sleeves for larger diameters.


28

O.D.Inches

Wt.Ea.Lbs.

Catalog Number

3/4 CC/20 mm 1" CC/25 mm 1-1/4" CC/32 mm 1-1/2"/40 mm 2"CC/50 mm

19.25-20.0019.75-20.5020.50-21.2521.35-22.10

38383839

366-00200007-000366-00205007-000366-00212507-000366-00221007-000

366-00200009-000366-00205009-000366-00212509-000366-00221009-000

366-00200011-000366-00205011-000366-00212511-000366-00221011-000

366-00200013-000366-00205013-000366-00212513-000366-00221013-000

366-00200015-000366-00205015-000366-00212515-000366-00221015-000

21.81-22.5622.50-23.2523.19-23.9423.75-24.50

39393942

366-00225607-000366-00232507-000366-00239407-000366-00245007-000

366-00225609-000366-00232509-000366-00239409-000366-00245009-000

366-00225611-000366-00232511-000366-00239411-000366-00245011-000

366-00225613-000366-00232513-000366-00239413-000366-00245013-000

366-00225615-000366-00232515-000366-00239415-000366-00245015-000

24.50-25.2525.55-26.3226.07-26.8226.06-27.50

42444444

366-00252507-000366-00263207-000366-00268207-000366-00275007-000

366-00252509-000366-00263209-000366-00268209-000366-00275009-000

366-00252511-000366-00263211-000366-00268211-000366-00275011-000

366-00252513-000366-00263213-000366-00268213-000366-00275013-000

366-00252515-000366-00263215-000366-00268215-000366-00275015-000

27.51-28.2528.75-29.5029.53-30.2829.75-30.50

45454747

366-00282507-000366-00295007-000366-00302807-000366-00305007-000

366-00282509-000366-00295009-000366-00302809-000366-00305009-000

366-00282511-000366-00295011-000366-00302811-000366-00305011-000

366-00282513-000366-00295013-000366-00302813-000366-00305013-000

366-00282515-000366-00295015-000366-00302815-000366-00305015-000

31.49-32.2431.75-32.5032.49-33.2433.21-33.96

49494949

366-00322407-000366-00325007-000366-00332407-000366-00339607-000

366-00322409-000366-00325009-000366-00332409-000366-00339609-000

366-00322411-000366-00325011-000366-00332411-000366-00339611-000

366-00322413-000366-00325013-000366-00332413-000366-00339613-000

366-00322415-000366-00325015-000366-00332415-000366-00339615-000

34.90-35.6535.67-36.4236.49-37.2436.97-37.72

52525454

366-00353507-000366-00364207-000366-00372407-000366-00377207-000

366-00353509-000366-00364209-000366-00372409-000366-00377209-000

366-00353511-000366-00364211-000366-00372411-000366-00377211-000

366-00353513-000366-00364213-000366-00372413-000366-00377213-000

366-00353515-000366-00364215-000366-00372415-000366-00377215-000

37.71-38.4638.45-39.2039.35-40.1039.81-40.5641.95-42.70

5454565656

366-00384607-000366-00392007-000366-00401007-000366-00405607-000366-00427007-000

366-00384609-000366-00392009-000366-00401009-000366-00405609-000366-00427009-000

366-00384611-000366-00392011-000366-00401011-000366-00405611-000366-00427011-000

366-00384613-000366-00392013-000366-00401013-000366-00405613-000366-00427013-000

366-00384615-000366-00392015-000366-00401015-000366-00405615-000366-00427015-000

42.40-43.15 57 366-00431507-000 366-00431509-000 366-00431511-000 366-00431513-000 366-00431515-000

3/4”, 1”, 1-1/4”. 1-1/2” and 2” CC Taps

NOTE: Sizes larger than shown may be fabricated upon request.Use Smith-Blair 600 Series Tapping Sleeves for larger diameters.


3/4"1"

1 1/4"1 1/2"

2" 2 1/2"

3”

50 51 54 52 53 55 56

3/4" CC 366-00200007-0003/4" BSP 366-00200050-000



29

All weldments includingstuds, slide bars andfingers are constructed ofstainless steel tominimize the possibility ofcorrosion.

Smith-Blair®’sexclusive “C” shapedkeeper bar permitsfast run-down of nutsagainst the weldmentsto provide equalizedtension along the fulllength of the saddleand excellent pipesupport andreinforcement.

Type 304 Stainless SteelWasher

Full circumference stainless steelbands, 5” wide on single stud 371 saddle,and 7-1/2” wide on double stud 372saddle, fits virtually all types and sizes ofpipe up to 12” diameter.

Heavy duty threadedstainless steel outletwith NPT or CC thread.

Full entrapment gasketcavity keeps the gasketpositioned at the properangle to provide optimumsealing efficiency.

360• contact on the pipeprovides full pipe support andreinforcement without acrushing action.

Flurocarbon coated Type 304 Stainless Steel nuts. (Note: Stud threads also coated to prevent galling.)

The Smith-Blair® 370 line of stainless steelservice saddles is uniquely designed for use on PVCpipe, but it can also be used on other types of pipe.

The saddles full circumference wide band ofstainless steel wraps fully around the pipe to give totalpipe support while providing the pipe with stability toprevent it from rocking or creeping, all without a crushingaction.

The same superior sealing, pipe supporting stabilityon the pipe and easy installation qualities you have cometo know and expect from other Smith-Blair® TaperSeal™Service Saddles are unchanged in this new corrosionprotected, all stainless steel saddle.

As the stud nuts are tightened, tangential pull directsmechanical forces toward and around the pipe, uniformlydistributing pressure around its circumference,reinforcing it and supporting it without crushing actionwhile providing unsurpassed sealing qualities.

In laboratory testing, TaperSeal™ gaskets havebeen able to withstand pressures in excess of theworking pressure of the pipe.


BAND: Type 304 Stainless Steel.SIDE BARS & FINGERS: Type 304 Stainless Steel.KEEPER BAR: Type 304 Stainless Steel.

STUD BOLTS: Type 304 Stainless Steel with Epoxy coating on threads.

NUTS: Type 304 Stainless Steel Flurocarbon coating on threads.

WASHERS: Types 304 Stainless Steel.


Compounded to resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blairengineers on applications involving chemicals).Temperature -20•F to 180•F.


371 & 372 Service SaddlesAll Stainless SteelCertified to NSF®/ANSI 61

30

371 Service SaddlesAll Stainless Steel, Single Stud1/2” CC Tap and 3/4” and 1” CC and NPT Taps--5” wide

Nom.Size In.

O.D.RangeInches

Catalog Number Wt.Ea.Lbs.1/2" CC/15 mm 3/4" NPT/20 mm 3/4" CC/20 mm 1" NPT/25 mm 1" CC/25 mm

4 4.50-4.80 371-00048004-000 371-00048006-000 371-00048007-000 371-00048008-000 371-00048009-000 36 6.63-6.90 371-00069004-000 371-00069006-000 371-00069007-000 371-00069008-000 371-00069009-000 48 8.63-9.05 371-00090504-000 371-00090506-000 371-00090507-000 371-00090508-000 371-00090509-000 5

10 10.75-11.10 371-00111004-000 371-00111006-000 371-00111007-000 371-00111008-000 371-00111009-000 512 12.75-13.20 371-00132004-000 371-00132006-000 371-00132007-000 371-00132008-000 371-00132009-000 6

Maximum Working Pressure 150 PSI.

Nom.Size In.

O.D.RangeInches

Catalog Number Wt.Ea.Lbs.1/2" CC/15 mm 3/4" NPT/20 mm 3/4" CC/20 mm 1" NPT/25 mm 1" CC/25 mm

4 4.50-4.80 372-00048004-000 372-00048006-000 372-00048007-000 372-00048008-000 372-00048009-000 66 6.63-6.90 372-00069004-000 372-00069006-000 372-00069007-000 372-00069008-000 372-00069009-000 68 8.63-9.05 372-00090504-000 372-00090506-000 372-00090507-000 372-00090508-000 372-00090509-000 7

10 10.75-11.10 372-00111004-000 372-00111006-000 372-00111007-000 372-00111008-000 372-00111009-000 812 12.75-13.20 372-00132004-000 372-00132006-000 372-00132007-000 372-00132008-000 372-00132009-000 9

372 Service Saddles All Stainless Steel, Double Stud1/2”, 3/4” and 1” NPT and CC Taps

Nom.Size In.

O.D.RangeInches

Catalog Number Wt.Ea.Lbs.1 1/4" NPT/32 mm 1 1/4" CC/32 mm 1 1/2" NPT/40 mm 1 1/2" CC/40 mm

4 4.50-4.80 372-00048010-000 372-00048011-000 372-00048012-000 372-00048013-000 66 6.63-6.90 372-00069010-000 372-00069011-000 372-00069012-000 372-00069013-000 68 8.63-9.05 372-00090510-000 372-00090511-000 372-00090512-000 372-00090513-000 7

10 10.75-11.10 372-00111010-000 372-00111011-000 372-00111012-000 372-00111013-000 812 12.75-13.20 372-00132010-000 372-00132011-000 372-00132012-000 372-00132013-000 9

1-1/4” and 1-1/2” CC and NPT Taps--7-1/2” wide

Nom.Size In.

O.D.RangeInches

Catalog Number Wt.Ea.Lbs.2" NPT/50 mm 2" CC/50 mm

4 4.50-4.80 372-00048014-000 372-00048015-000 6

6 6.63-6.90 372-00069014-000 372-00069015-000 6

8 8.63-9.05 372-00090514-000 372-00090515-000 7

10 10.75-11.10 372-00111014-000 372-00111015-000 8

12 12.75-13.20 372-00132014-000 372-00132015-000 9

2” CC and NPT Taps--7 1/2” wide

Maximum Working Pressure 150 PSI.

371 & 372 Service SaddlesAll Stainless SteelCertified to NSF®/ANSI 61

31

Material SpecificationsBODIES: Ductile Iron ASTM A-536.

FINISH: Fusion bonded Flexi-Coat® Epoxy.


Compounded to resist - oil, acids alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair® engineers on applications involving chemicals).Temperature -20•F to 180•F.

STRAPS: 18-8 Type 304 Premium Grade Stainless Steel.

NUTS: 18-8 Type 304 Stainless Steel-Flurocarbon Coated to prevent galling.

WASHERS: 18-8 Type 304 Stainless Steel.


Smith-Blair® 397 Saddles combine the featuresof ductile iron and stainless steel to provide maximumsupport and reinforcement of the pipe. The ductile ironbody has the strength to ensure a solid base for theservice outlets.

As the strap stud bolts are tightened, tangential pulldirects the mechanical forces toward and around thepipe, uniformly distributing pressure around thecircumference of the pipe to support and reinforce it.

Nom.SizeIn.

O.D.In.

Wt.Ea.Lbs.

Catalog Number Ctn.Qty.

3/4" NPT 3/4" CC 1" NPT 1" CC

2 2.38 4 397-00023806-000 397-00023807-000 397-00023808-000 397-00023809-000 6

4 4.50 5 397-00045006-000 397-00045007-000 397-00045008-000 397-00045009-000 44 4.80 5 397-00048006-000 397-00048007-000 397-00048008-000 397-00048009-000 4

6 6.63 5 397-00066306-000 397-00066307-000 397-00066308-000 397-00066309-000 46 6.90 5 397-00069006-000 397-00069007-000 397-00069008-000 397-00069009-000 4

8 8.63 6 397-00086306-000 397-00086307-000 397-00086308-000 397-00086309-000 48 9.05 6 397-00090506-000 397-00090507-000 397-00090508-000 397-00090509-000 4

12 12.75 8 397-00127506-000 397-00127507-000 397-00127508-000 397-00127509-000 212 13.20 8 397-00132006-000 397-00132007-000 397-00132008-000 397-00132009-000 2

Nom.SizeIn.

O.D.In.

Wt.Ea.Lbs.

Catalog Number Ctn.Qty.

1-1/4" NPT 1-1/4" CC 1-1/2" NPT 1-1/2" CC 2" NPT 2" CC

4 4.50 6 397-00045010-000 397-00045011-000 397-00045012-000 397-00045013-000 397-00045014-000 397-00045015-000 6

4 4.80 6 397-00048010-000 397-00048011-000 397-00048012-000 397-00048013-000 397-00048014-000 397-00048015-000 4

6 6.63 7 397-00066310-000 397-00066311-000 397-00066312-000 397-00066313-000 397-00066314-000 397-00066315-000 4

6 6.90 7 397-00069010-000 397-00069011-000 397-00069012-000 397-00069013-000 397-00069014-000 397-00069015-000 4

8 8.63 8 397-00086310-000 397-00086311-000 397-00086312-000 397-00086313-000 397-00086314-000 397-00086315-000 4

8 9.05 8 397-00090510-000 397-00090511-000 397-00090512-000 397-00090513-000 397-00090514-000 397-00090515-000 4

12 12.75 10 397-00127510-000 397-00127511-000 397-00127512-000 397-00127513-000 397-00127514-000 397-00127515-000 2

12 13.20 10 397-00132010-000 397-00132011-000 397-00132012-000 397-00132013-000 397-00132014-000 397-00132015-000 2

1 1/4” - 2” NPT and CC Taps

397 Saddles are furnished with a 3” wide, one piece, stainless steel strap. Finish Code-000.If you prefer two separate straps, use finish code-001.

397 Service SaddlesDuctile Iron Body, 3” Wide Stainless Steel Strap, Cast Iron and Steel Sizes for PVC Pipe


When properly sized from the factory, this productmeets the requirements listed in the “Handbook ofPVC Pipe” by the Uni-Bell PVC Pipe Associationand the requirements in the AWWA Manual M23:“PVC Pipe-Design and Installation.”

ANSI/NSF®61 Listed

32

325 Bronze Service SaddlesExtra-Wide Stainless Steel Strap, Ideal for PVC Applications (sized for Steel & Ductile Iron O.D.) Certified to NSF®/ANSI 61


1 1/4” - 2” NPT and CC Taps

Nom.SizeIn.

O.D.Inches

Ctn.Qty.

Catalog Number Wt.EachLbs.3/4" NPT 3/4" CC 1" NPT 1" CC

4 4.50 4 325-045006-000 325-045007-000 325-045008-000 325-045009-000 6.34.80 4 325-048006-000 325-048007-000 325-048008-000 325-048009-000 6.3

6 6.63 4 325-066306-000 325-066307-000 325-066308-000 325-066309-000 7.36.90 4 325-069006-000 325-069007-000 325-069008-000 325-069009-000 7.3

8 8.63 4 325-086306-000 325-086307-000 325-086308-000 325-086309-000 7.99.05 4 325-090506-000 325-090507-000 325-090508-000 325-090509-000 7.9

10 10.75 4 325-107506-000 325-107507-000 325-107508-000 325-107509-000 9.311.10 4 325-111006-000 325-111007-000 325-111008-000 325-111009-000 9.3

12 12.75 2 325-127506-000 325-127507-000 325-127508-000 325-127509-000 10.313.20 2 325-132006-000 325-132007-000 325-132008-000 325-132009-000 10.3

Nom.SizeIn.

O.D.Inches

Ctn.Qty.

Catalog Number Wt.EachLbs.1 1/4" NPT 1 1/4" CC 1 1/2" NPT 1 1/2" CC 2" NPT 2" CC

4 4.50 4 325-045010-000 325-045011-000 325-045012-000 325-045013-000 325-045014-000 325-045015-000 7.54.80 4 325-048010-000 325-048011-000 325-048012-000 325-048013-000 325-048014-000 325-048015-000 7.5

6 6.63 4 325-066310-000 325-066311-000 325-066312-000 325-066313-000 325-066314-000 325-066315-000 7.96.90 4 325-069010-000 325-069011-000 325-069012-000 325-069013-000 325-069014-000 325-069015-000 7.9

8 8.63 4 325-086310-000 325-086311-000 325-086312-000 325-086313-000 325-086314-000 325-086315-000 9.19.05 4 325-090510-000 325-090511-000 325-090512-000 325-090513-000 325-090514-000 325-090515-000 9.1

10 10.75 4 325-107510-000 325-107511-000 325-107512-000 325-107513-000 325-107514-000 325-107515-000 10.311.10 4 325-111010-000 325-111011-000 325-111012-000 325-111013-000 325-111014-000 325-111015-000 10.3

12 12.75 2 325-127510-000 325-127511-000 325-127512-000 325-127513-000 325-127514-000 325-127515-000 11.513.20 2 325-132010-000 325-132011-000 325-132012-000 325-132013-000 325-132014-000 325-132015-000 11.5

Smith-Blair® 325 Series Bronze Bodied ServiceSaddles combine the features of a cast bronze saddlebody and a fabricated 3 1/2 inch wide stainless steelstrap or optional silicon bronze bale.

In line with the superior performance standards ofour other service saddles, the properly installed saddleprovides almost 360• of pipe support.

As the hardware is tightened, tangential pulldirects the mechanical forces toward and around thepipe, distributing it uniformly. For PVC applications,the wide single strap prevents crushing of the pipe andprovides maximum support and reinforcement.


Body: 85-5-5-5 Cast Bronze per ASTM B584 or B62.Gasket: NSF-61 Approved Buna-N.

Temperature -20•F to 180•F.Nuts/Washers: 18-8 Type 304 Stainless Steel. Hardware: 18-8 Type 304 Premium Grade Stainless Nuts

specially coated to prevent galling.Steel or Silicon Bronze Bale.

Pressure Rating:150 PSI.


33

3/4” and 1” NPT and CC TapsNom.SizeIn.

O.D.RangeInches

Ctn.Qty.

Catalog Number Wt.EachLbs.3/4" NPT 3/4" CC 1" NPT 1" CC

4 4.50 - 4.80 4 325-048006-100 325-048007-100 325-048008-100 325-048009-100 6.36 6.63 - 6.90 4 325-069006-100 325-069007-100 325-069008-100 325-069009-100 7.38 8.63 - 9.05 4 325-090506-100 325-090507-100 325-090508-100 325-090509-100 7.9

10 10.75 - 11.10 4 325-111006-100 325-111007-100 325-111008-100 325-111009-100 9.312 12.75 - 13.20 2 325-132006-100 325-132007-100 325-132008-100 325-132009-100 10.3

1 1/4” - 2” NPT and CC TapsNom.SizeIn.

O.D.Range Inches

Ctn.Qty.

Catalog Number Wt.EachLbs.1 1/4" NPT 1 1/4" CC 1 1/2" NPT 1 1/2" CC 2" NPT 2" CC

4 4.50 - 4.80 4 325-048010-100 325-048011-100 325-048012-100 325-048013-100 325-048014-100 325-048015-100 7.56 6.63 - 6.90 4 325-069010-100 325-069011-100 325-069012-100 325-069013-100 325-069014-100 325-069015-100 7.98 8.63 - 9.05 4 325-090510-100 325-090511-100 325-090512-100 325-090513-100 325-090514-100 325-090515-100 9.110 10.75 - 11.10 4 325-111010-100 325-111011-100 325-111012-100 325-111013-100 325-111014-100 325-111015-100 10.312 12.75 - 13.20 2 325-132010-100 325-132011-100 325-132012-100 325-132013-100 325-132014-100 325-132015-100 11.5

325 Bronze Service SaddlesExtra-Wide Stainless Steel Strap, with Range, for Rigid Pipe Applications (Not Recommended for Plastic Pipe) ANSI/NSF® 61 Listed

34

Product ProductNumber Product Type Application For Pipe

Sizes

622

Tapping SleeveAvailable with threaded outlets. 3/4" thru 6" I.P. 3/4" thru 2" CC.

Also available in all stainless steel construction.

Reducing and size-on-sizeoutlets on all types of pipe 4" & larger

623 Carbon SteelMechanical Joint

Reducingand size-on-size outlets 4" & larger

625 Tapping Sleeve for Concrete Cylinder Pipe

Reducing outlets onconcrete steel cylinder pipe 12" & larger

626 Weld-on-Outlet Reducing outlet that can bewelded onto any steel pipe. 4" & larger

662Stainless Steel TappingSleeve with Flexi-CoatEpoxy Coated Flange

Reducingand size-on-size

flanged 4" thru 12"4" thru 24"

663Stainless Steel

Tapping Sleeve withStainless Steel Flange



664Stainless Steel TappingSleeve with Flexi-CoatEpoxy Coated Flange



665Stainless Steel

Tapping Sleeve withStainless Steel Flange



Check out these other products from Smith-Blair

See the Smith-Blair CC-620 Tapping Sleeve Brochure for more information on these products.

Smith-Blair® Tapping Sleeves

35

General Information

1. Initial tightening confines the TaperSeal™ gasket inthe gasket cavity. During continued tightening, thecanted ears on the saddle body and angular shape of thebales cause a tangential pull that forms the body castingto the pipe, directing mechanical forces toward andaround the pipe to support and reinforce it. If the saddlebody is not initially loose on the pipe, it should be spreadbefore installation.

2. Tightening is complete when the saddle bodyconforms to the pipe. No additional benefit results fromover-tightening the saddle.

3. Service Saddle gaskets are glued in for conveniencein handling. The glue does not improve the performanceof the saddle. Should the gasket come loose, simplyposition it in the saddle body and continue withinstallation.

4. It is a good practice to screw the corporation stop, orother fitting being used, into the service saddle beforemounting the saddle on the pipe. Doing so protects thethreads from damage or distortion during installation andverifies that the fitting is the correct size and thread type.

5. Service saddles should be initially placed, as near aspossible to their exact final location on the pipe.Excessive moving of the saddle on the pipe coulddamage the rubber gasket.

6. There are two types of threads commonly furnished onservice saddles in the United States and Canada; astandard pipe thread and a special waterworks threaddeveloped for service connections that have a steepertaper than the standard pipe thread. Some commondesignations for these types of threads are:

Standard Pipe Thread: “NPT”-National Pipe Thread “IP”-Iron Pipe “IPS”-Iron Pipe Size “IPT”-Iron Pipe Thread “Pipe Thread” “Standard Pipe Thread”

Waterworks Thread: “CC”-Corporation Cock “CS”-Corporation Stop “AWWA”- American Water Works Association “Corporation” “Corp” “Copper Service” “Mueller”

In Europe, some areas of the Caribbean, and some otherlocations, “BSP” (British Standard Pipe) threads may beused.

The technical performance data, specifications andrecommendations in this bulletin are intended as a referencefor the utilization of Smith-Blair® clamps and couplings bypiping designers, installers and owners, and maintenancepersonnel.

Many situations have special conditions, requiring theexpertise of qualified personnel who must make the decisionregarding application. The material presented here is not

intended as a substitute for professional assistance.Pressures, temperatures and other performance standards

stated herein should never be exceeded.Although an extra effort has been made to insure the

accuracy of this material, Smith-Blair® makes no express orimplied warranties regarding the information or materialscontained in this bulletin. Anyone making use of this informationassumes all liability resulting from such use.

36SWP/2500/0410

Smith-Blair, Inc.30 Globe Avenue


Texarkana, TX 75505Phone:(800) 643-9705 (870) 773-5127Fax:(800) 648-6792 (870) 773-5212

www.smith-blair.com

Distributed By:

Clamp and Coupling Products CC-411 07/09

Steel Couplings411 413 415416 418 481

411 415

416 418

AWWA C219

Product Product Type Application For Pipe Sizes WorkingPressure Temperature

411

Steel couplingJoining plain-endpipe with same

outside diameter

1/2" and larger12mm

150 PSI+(according to

pipe size,design & type)

-20ºF to 180ºF.(higher with

special gaskets)

413

Steel transitioncoupling

Joining pipe of differentoutside diameters

2" and larger50 mm




special gaskets)

415

Steel reducingcoupling

Joining pipe of differentoutside diameters

6" and larger152mm




special gaskets)

416

Steel insulatingcoupling

Joining pipe insulatingone from the other

2" and larger50 mm




special gaskets)

418

Bolted tee couplingwith threaded outlet Branch connections 3/4" thru 2"




special gaskets)

481

Steel pipe end cap

Permanent or temporarypipeline closure for

line testing, end cappingor night capping

2" and larger50 mm

Up to 150 PSI+(according to



special gaskets)

Pipe-Lock JointRestraint Coupling

Connecting plain end toplain end pipe - Straight

and Reducing

3”-48” (D.I.)3”-36” (PVC)

See CC-100for details -

Page 10-20ºF to 150ºF.

Flange-LockFlange Coupling

Adapter (CC-100)

Connecting & RestrainingFlanged to plain end pipe 14” thru 24” 150 PSI -20ºF to 150ºF.

920

Flange-LockFlange Coupling

Adapter (CC-100)

Connecting & RestrainingFlanged to plain end pipe 14” thru 24” 150 PSI -20ºF to 150ºF.

2

Selection Guide for Steel Couplings & Complimentary Products

This product does not restrain axial

pipe movement!!WARNING

The products in this brochure are not intended for use on natural gas systems or pipelines carrying hazardous line content s. Refer to the appropriate gas catalog orconsult Smith-Blair engineers for recommendations.

911

470 Series

2” - 12” (50mm - 300mm)

Standard weight design with cast follower ,steel sleeve and low-alloy bolts and nuts.

3

3” - 12” (70mm - 300mm)

Standard weight design with steelfollowers, steel sleeve, and high-strengthlow-alloy bolts and nuts.

14” - 60” (355mm - 1500mm)..00...

Standard and heavy weight design with heavyrolled s teel f ollower, st eel s leeve a nd h ighstrength low-alloy bolts and nuts.

411 Steel CouplingsMaterial Specifications

Material SpecificationsSLEEVE: ASTM A53, ASTM A513 or carbon steel

having a minimum yield of 30,000 p si.FOLLOWERS: ASTM A715 Grade 80 HSLA Steel.BOLTS & NUTS: High strength, low-alloy steel with heavy,

semi-finished hexagon nuts. Optional: Stainless Steel and electro-galvanized.

FINISH: Fusion bonded Flexi-Coat Epoxy per AWWA C213.


Material SpecificationsSLEEVE: Carbon steel having a minimum yield of

30,000 psi.FOLLOWERS: Ductile iron ASTM A536. BOLTS & NUTS: Carbon steel ASTM A307 electrogalvanized

with di-chromate seal.Optional: Stainless steel.

FINISH: Fusion bonded Flexi-Coat Epoxy per AWWAC213.


Material SpecificationsSLEEVE: Carbon steel having a minimum yield of

30,000 psi.FOLLOWERS: AISI C1020 steel.BOLTS & NUTS: High strength, low-alloy steel with heavy,

semi-finished hexagon nuts. Optional: Stainless Steel and electro-galvanized.



Material SpecificationsSLEEVE: ASTM A53, ASTM A513 or carbon steel

having a minimum yield of 30,000 p si.FOLLOWERS: Ductile iron ASTM A536 or carbon steel

having a minimum yield of 30,000 p si.BOLTS & NUTS: High-strength, low-alloy steel with heavy

semi-finished hexagon nuts. Optional: Stainless steel and electro-galvanized.



1/2” - 2” (12mm - 50 mm)

Standard weight, two bolt design withcast follower, steel sleeve, and electro-galvanized steel bolts and nuts.

Gasket Material SpecificationsSTANDARD: Nitrile (Buna-N)-NSF 61 Compounded toproduce superior storage and performance characteristicswhile resisting water , acids, alkalies, most (aliphatic)hydrocarbons and many other chemicals. Temperature range-20°F. to 180°F. Consult manufacturer for specific applicationsor other service temperatures.

Optional: Nitrile (Buna N) Protected.A continuous brass spring molded into the leading edge of thegasket to insure met al cont act between the pipe and thecoupling sleeve. Extra protection is given against line contentand the coupling is electrically bonded to the pipe.


4

411 Steel Coupling Advantages No special pipe end preparation required. Simple installation requires only a wrench. Pipe does not have to be cut to exact length. Exact alignment of pipe ends is not necessary . Coupling fit s on out side wall of pipe so there are no

internal projections to disturb flow and no damage to thepipe lining.

Many types of pipe, including pipes of different materials,can be joined.

Every joint is a union (a length of pipe can be removed bydisassembling the coupling).

Coupling allows for limited expansion and contraction. Coupling dampens vibration. Deflection capability of coupling permits installation of

curves or changes in grade without the use of specialpipe fabrications.

Coupling allows for angular deflection caused by settle-ment or lateral movement af ter installation.

Coupling can be installed in any environment, so weatheris not a factor.

Fire hazard eliminated because no welding is required. Coupling increases the hoop strength of the pipe at the

joint.

411 Steel Couplings

411 - 30”

Bolts & Nuts

This product does not restrain axial pipe movement

!WARNING

Smith-Blair Pipe Couplings offer many distinctadvantages when installed in a piping system. Properlyselected and inst alled flexible couplings maint ain thecontinuity of the pipe system, ret ain the line contents underinternal pressure and prevent infiltration under vacuum.

FollowerGasket

SleeveGasket

Follower

411 Steel Coupling Parts

Smith-Blair water couplings consists of one cylindricalsleeve with conical inner surfaces at each end; two resilient,wedge shaped, specially-compounded rubber gaskets; tworing shaped followers; and a set of high-strength, low-alloytrack head, oval neck, rolled-thread bolt s with heavy hexnuts.

5

The coupling is assembled on the pipes with the sleevecentered over the pipe ends, a wedge-shaped gasketengaging the conical inner surface on each end of thesleeve, a follower confining the outer surface of eachgasket and the bolts joining the followers.

As the bolts are tightened, the followers are drawn towardeach other compacting the gaskets in the cavity formed bythe sleeve conical surface, follower and the pipe wall.This forms a flexible, leak-resistant, safe method of joiningpipe. The coupling is floating on the pipe and stressescaused by expansion, contraction or angular deflectioncan be absorbed.

Specially compounded gaskets of allnew materials formulated to resistcompression set. They absorbvibration, expansion, contraction andallow flexibility to the joint whilemaintaining a leak-resist ant, resilientseal.

High-strength bolts with double radiustrack head, rolled threads and heavyhexagon nuts.

Followers of special steel rolled millsection, high-strength ductile iron orstamped high-strength, low alloysteel.

Center sleeve made from carbon steelrolled to Smith-Blair ’s specifications.

Coupling Parts Loose on Pipe Coupling Parts After Tightening Bolts

411 Steel Couplings

6

Smith-Blair Anchor Stud Couplings are designed asan alternative coupling method to harness assemblies forapplications where moderate longitudinal stresses areencountered. They have been used successfully in: powerplant situations where fluctuating pressures are present, ontank risers in earthquake prone areas, in sprinkler systemsand anywhere extra axial holding strength is required.

The drawing to the right illustrates how leak-resist antanchor studs are threaded through the coupling and into thepipe to provide a secure lock. Please consult Smith-Blairengineers for specific anchor stud couplingrecommendations to fit your special application. Anchorstuds do not eliminate the need for fixed pipe support. Pipetype and condition will be factors in performance of anchorstuds.

Pipe stops consists of a restriction in the center of thecoupling sleeve to prevent the pipe from passing through thesleeve, and are available in most couplings upon request.

Pipe stops serve to keep the coupling centered over thepipe ends under service conditions that could possibly causethe coupling to move, such as extreme vibration or shock.They also facilitate installation of long runs of new pipeline insome circumstances.

Pipe stops limit the versatility of couplings. The inabilityto slide the coupling sleeve completely onto one pipe makesit necessary to cut pipe to open the pipeline for futuremodifications or repairs. They also limit the use of couplingsto insert equipment, fittings or sections of pipe into existingpipelines.

Fusion Bonded Flexi-Coat® Epoxy Powder Coatingfurnished by Smith-Blair is applied by an electrost aticprocess. This process is a positive method of obt aining auniform coating of controlled mil thickness with minimumfield touch-up required. It is FDA approved and certified toNSF®/ANSI 61-G. for use on pot able water systems, and itmeets application methods AWWA C550, C213 and C219.

Note: From a technical standpoint, it is not considered goodpractice to apply wet type finish coatings prior to installationof pipe couplings. The handling of these fittings, prior to andduring inst allation, is likely to damage the coating beyondrepair.

Anchor Stud Couplings and Pipe Stops (Optional)

Anchor Stud Coupling

Pipe

Flexi-Coat Epoxy Powder Coating

7

+ Indicates couplings furnished with steel “Z” section, High S trength Follower Flanges.

The basic design of bolted compression couplings does not provide for anchoring the pipes against pull-out. Suitable anchorage must be providedwhen excessive pipe movement could cause the pipe to move out of the coupling.

NOTE: Couplings working pressures depend on many variables such as pipe type, pipe diameter, sleeve thickness, sleeve material,gasket cross section, follower type and number of bolts. Consult Smith-Blair® regarding your specific coupling pressure requirements.

Standard Length Sleeves 1/2” thru 12” Steel Pipe Sizes

Nom.Pipe

Size In.

PipeO.D.

Inches

Catalog No.Buna-N Gasket

SleeveThk. X Lgth. In.

FlangeO.D.

Inches(D)

Bolts Approx.Ship

Wt. Lbs.(A) (B) No. Dia. In. Lgth. In.(L)

1/2 .084 411-00008401-003 .120 4 1/2 3 5/8 2 1/2 7 2 1/43/4 1.05 411-00010501-003 .120 4 1/2 3 7/8 2 1/2 7 2 1/21 1.32 411-00013201-003 .120 5 4 1/4 2 1/2 7 3 1/4

1 1/4 1.66 411-00016601-003 .120 5 4 9/16 2 1/2 7 41 1/2 1.90 411-00019001-003 .120 5 4 13/16 2 1/2 7 4 1/4

2 2.00 411-00020001-003 .120 5 4 13/16 2 1/2 7 4 1/4

2 2.38

411-00023801-003 .120 5 5 5/16 2 1/2 7 4 3/4411-00023851-003 .120 5 5 11/16 2 5/8 8 5 1/2411-00023861-003 .120 5 5 11/16 3 5/8 8 6 1/2411-00023802-003 .120 7 5 11/196 3 5/8 10 1/2 9 1/2

2 1/2 2.88 411-00028801-003 .203 5 6 1/2 3 5/8 8 12 3/43 3.00 411-00030001-003 .203 5 6 9/16 3 5/8 8 12 3/4

+33.50

411-90035001-003 .180 5 8.03 3 5/8 6 11 1/23 411-00035051-003 .180 5 7.09 4 5/8 8 12 1/4

+3 411-90035002-003 .180 7 8.03 3 5/8 10 1/2 14 1/23 1/2-4 4.00 411-00040001-003 .188 5 7 9/16 4 5/8 8 1/2 17 1/2

+4 4.50 411-90045001-003 .188 5 9.05 4 5/8 6 13411-90045002-003 .188 7 9.05 4 5/8 8 15 1/2

4 1/2-5 5.00 411-00050001-003 .250 5 8 5/8 4 5/8 8 20 1/2

5 5.56411-00055601-003 .250 5 9 3/16 4 5/8 8 20 1/2411-00055602-003 .250 7 9 3/16 4 5/8 10 1/2 23 1/2411-00055603-003 .250 10 9 3/16 4 5/8 13 1/2 31 1/2

+6 6.63411-90066301-003 .250 5 11 1/2 6 5/8 6 22 3/4411-90066302-003 .250 7 11 1/2 6 5/8 8 26411-90066303-003 .250 10 11 1/2 6 5/8 10 1/2 34 1/4

+8 8.63411-90086301-003 .250 5 13 1/2 6 5/8 6 28411-90086302-003 .250 7 13 1/2 6 5/8 8 32411-90086303-003 .250 10 13 1/2 6 5/8 10 1/2 42

10 10.00411-00100001-003 .250 5 14 5/16 8 5/8 8 33411-00100002-003 .250 7 14 5/16 8 5/8 10 1/2 38411-00100003-003 .250 10 14 5/16 8 5/8 13 1/2 50

+10 10.75

411-90107501-003 .250 5 15.61 8 5/8 6 34411-90107502-003 .250 7 15.61 8 5/8 8 40411-90107507-003 .375 7 15.61 8 5/8 8 49411-90107503-003 .250 10 15.61 8 5/8 10 1/2 52

12 12.00411-00120001-003 .250 5 16 5/16 8 5/8 8 37411-00120002-003 .250 7 16 5/16 8 5/8 10 1/2 44411-00120003-003 .250 10 16 5/16 8 5/8 13 1/2 56

+12 12.75

411-90127501-003 .250 5 17.61 8 5/8 6 39411-90127502-003 .250 7 17.61 8 5/8 8 46411-90127507-003 .375 7 17.61 8 5/8 8 56411-90127503-003 .250 10 17.61 8 5/8 10 1/2 59

411 Steel Couplings

8

Nom.Pipe

Size In.

PipeO.D.

Inches



FlangeO.D.

Inches(D)

Bolts Approx.Ship


14 14.00

411-00140001-003 1/4 5 18 5/16 6 5/8 8 41411-00140002-003 1/4 7 18 5/16 6 5/8 10 1/2 48411-00140007-003 3/8 7 18 7/16 6 5/8 10 1/2 75411-00140008-003 3/8 10 18 7/16 6 5/8 13 1/2 94

16 16.00

411-00160002-003 1/4 7 20 5/16 8 5/8 10 1/2 56411-00160007-003 3/8 7 20 7/16 8 5/8 10 1/2 87411-00160003-003 1/4 10 20 5/16 8 5/8 10 1/2 72411-00160008-003 3/8 10 20 7/16 8 5/8 10 1/2 108

18 18.00

411-00180002-003 1/4 7 22 7/16 8 5/8 10 1/2 81411-00180007-003 3/8 7 22 7/16 8 5/8 10 1/2 96411-00180003-003 1/4 10 22 7/16 8 5/8 13 1/2 109411-00180008-003 3/8 10 22 7/16 8 5/8 13 1/2 119

20 20.00

411-00200002-003 1/4 7 24 7/16 10 5/8 10 1/2 91411-00200007-003 3/8 7 24 7/16 10 5/8 10 1/2 107411-00200003-003 1/4 10 24 7/16 10 5/8 13 1/2 122411-00200008-003 3/8 10 24 7/16 10 5/8 13 1/2 134

22 22.00

411-00220002-003 1/4 7 26 7/16 10 5/8 10 1/2 98411-00220007-003 3/8 7 26 7/16 10 5/8 10 1/2 116411-00220003-003 1/4 10 26 7/16 10 5/8 13 1/2 132411-00220008-003 3/8 10 26 7/16 10 5/8 13 1/2 145

24 24.00

411-00240002-003 1/4 7 28 7/16 10 5/8 10 1/2 106411-00240007-003 3/8 7 28 7/16 10 5/8 10 1/2 125411-00240003-003 1/4 10 28 7/16 10 5/8 13 1/2 142411-00240008-003 3/8 10 28 7/16 10 5/8 13 1/2 156

Standard Length Sleeves 14” thru 24” Steel Pipe Sizes


NOTE: Couplings working pressures depend on many variables such as pipe type, pipe diameter, sleeve thickness, sleeve material,gasket cross section, follower type and number of bolts. Consult Smith-Blair® regarding your specific coupling pressure requirements.

411 Steel Couplings

9

Long Length Sleeves 1/2” thru 24” Steel Pipe Sizes

+ Indicates couplings furnished with steel “Z” section, High S trength Follower Flanges.


NOTE: Coupling working pressures depend on many variables such as pipe type, pipe diameter, sleeve thickness, sleeve material,gasket cross section, follower type and number of bolts. Consult Smith-Blair regarding your specific coupling pressure requirements.

Nom.Pipe

Size In.

PipeO.D.

Inches



FlangeO.D.

Inches(D)

Bolts Approx.Ship


1/2 .084 411-00008410-003 0.120 12 3 5/8 2 1/2 14 43/4 1.05 411-00010510-003 0.120 12 3 7/8 2 1/2 14 4 1/21 1.32 411-00013210-003 0.120 12 4 1/2 2 1/2 14 5 1/2

1 1/4 1.66 411-00016610-003 0.120 12 4 9/16 2 1/2 14 71 1/2 1.90 411-00019010-003 0.120 12 4 13/16 2 1/2 14 7 1/2

2 2.00 411-00020010-003 0.120 12 4 13/16 2 1/2 14 7 1/22.38 411-00023810-003 0.120 12 5 11/16 3 5/8 15 13

2 1/2 2.88 411-00028810-003 0.203 12 6 1/2 3 5/8 15 17+3 3.50 411-90035010-003 0.180 12 8.03 3 5/8 15 20 1/2

3 1/2-4 4.00 411-00040010-003 0.180 12 7 9/16 4 5/8 15 25

+4 4.50411-90045010-003 0.188 12 9.05 4 5/8 13 1/2 22411-90045011-003 0.188 16 9.05 4 5/8 17 27 1/2411-90045012-003 0.188 24 9.05 4 5/8 25 38 1/2

4 1/2-5 5.00 411-00050010-003 0.250 12 8 5/8 4 5/8 15 30

5 5.56 411-00055611-003 0.250 16 9 3/16 4 5/8 19 1/2 41411-00055612-003 0.250 24 9 3/16 4 5/8 27 1/2 52

+6 6.63 411-90066311-003 0.250 16 11 1/2 6 5/8 17 46 1/2411-90066312-003 0.250 24 11 1/2 6 5/8 25 65

+8 8.63 411-90086311-000 0.250 16 13 1/2 6 5/8 17 57411-90086312-003 0.250 24 13 1/2 6 5/8 25 79

10 10.00 411-00100012-003 0.250 16 14 5/16 8 5/8 19 1/2 67411-00100012-003 0.250 24 14 5/16 8 5/8 27 1/2 97

+10 10.75 411-90107511-003 0.250 16 15.61 8 5/8 17 71411-90107512-003 0.250 24 15.61 8 5/8 25 99

12 12.00 411-00120011-003 0.250 16 16 1/16 8 5/8 19 1/2 77411-00120012-003 0.250 24 16 1/16 8 5/8 27 1/2 108

+12 12.75411-90127511-003 0.250 16 17.61 8 5/8 17 81411-90127512-003 0.250 24 17.61 8 5/8 25 113411-90127516-003 0.375 24 17.61 8 5/8 25 148

14 14.00 411-00140015-003 0.375 16 18 7/16 6 5/8 19 1/2 126411-00140016-003 0.375 24 18 7/16 6 5/8 27 1/2 171

16 16.00 411-00160015-003 0.375 16 20 7/16 8 5/8 19 1/2 146411-00160016-003 0.375 24 20 7/16 8 5/8 27 1/2 197

18 18.00 411-00180015-003 0.375 16 22 7/16 8 5/8 19 1/2 160411-00180016-003 0.375 24 22 7/16 8 5/8 27 1/2 219

20 20.00 411-00200015-003 0.375 16 24 7/16 10 5/8 19 1/2 180411-00200016-003 0.375 24 24 7/16 10 5/8 27 1/2 245

22 22.00 411-00220015-003 0.375 16 26 7/16 10 5/8 19 1/2 196411-00220016-003 0.375 24 26 7/16 10 5/8 27 1/2 265

24 24.00 411-00240015-003 0.375 16 28 7/16 10 5/8 19 1/2 210411-00240016-003 0.375 24 28 7/16 10 5/8 27 1/2 286

411 Steel Couplings

10

411 Steel Couplings (Standard)for Cast and Ductile Iron Pipe Sizes

Smith-Blair’s 411 Steel Coupling for cast iron, asbestoscement and steel pipe provides a means for connectingcast iron, steel, asbestos cement, plastic or other type ofpipe with a coupling having a steel sleeve. The sleeve hasa fusion bonded epoxy coating that provides protectionfrom corrosive environments or line contents.

Standard Length Sleeves 2” thru 14” pipe sizes.Nom.Pipe

Size In.

PipeO.D.

InchesCatalog No.


OverallDia.(D)

Bolts Approx.Ship

Wt. Lbs.(A) (B) No. Dia. In. Lgth. In. (L)2 2.34-2.56 411-00025002-003 .216 7 6.3/16 2 5/8 10 1/2 13.5

411-00025003-003 .216 10 6.3/16 2 5/8 13 1/2 16.32 1/2 2.75-2.88 411-00027502-003 .203 7 6.3/16 3 5/8 11 14.8

411-00027503-003 .203 10 6.3/16 3 5/8 14 17.83 3.75-3.86 411-00038002-003 .237 7 7 13/16 3 5/8 10 1/2 20.3

411-00038003-003 .237 10 7 13/16 3 5/8 13 1/2 24.63-4 3.87-4.04 411-00039602-003 .188 7 7 11/32 4 5/8 11 21.4

411-00039603-003 .188 10 7 11/32 4 5/8 14 25.74 4.07-4.19 411-00041302-003 .188 7 8 3/32 4 5/8 11 22.3

411-00041303-003 .188 10 8 3/32 4 5/8 14 26.84 4.74-5.06 411-00050002-003 .250 7 8 19/32 4 5/8 11 27

411-00050003-003 .250 10 8 19/32 4 5/8 14 32.54-5 5.00-5.16 411-00051002-003 .250 7 9 5/32 4 5/8 11 27.5

411-00051003-003 .250 10 9 5/32 4 5/8 14 33.16 6.84-6.96 411-00069002-003 .250 7 10 9/16 5 5/8 11 37.2

411-00069003-003 .250 10 10 9/16 5 5/8 14 44.86 7.04-7.16 411-00071002-003 .250 7 10 9/16 5 5/8 11 38.3

411-00071003-003 .250 10 10 9/16 5 5/8 14 46.16 7.14-7.26 411-00072002-003 .250 7 11 5/16 5 5/8 11 38.8

411-00072003-003 .250 10 11 5/16 5 5/8 14 46.88 8.91-9.30 411-00090502-003 .250 7 12 13/16 6 5/8 11 48.8

411-00090503-003 .250 10 12 13/16 6 5/8 14 58.88 9.30-9.50 411-00094202-003 .250 7 13 23/32 6 5/8 11 50.8

411-00094203-003 .250 10 13 23/32 6 5/8 14 61.210 11.04-11.16 411-00111002-003 .250 7 15 1/8 7 5/8 11 59.9

411-00111003-003 .250 10 15 1/8 7 5/8 14 72.110 11.34-11.46 411-00114002-003 .250 7 15 1/8 7 5/8 11 61.5

411-00114003-003 .250 10 15 1/8 7 5/8 14 74.110 11.84-12.00 411-00119502-003 .250 7 16 8 5/8 11 64.5

411-00119503-003 .250 10 16 8 5/8 14 77.712 13.14-13.26 411-00132007-003 .375 7 17 5/8 8 5/8 11 71.3

411-00132008-003 .375 10 17 5/8 8 5/8 14 85.812 13.44-13.56 411-00135007-003 .375 7 17 7/8 8 5/8 11 72.9

411-00135008-003 .375 10 17 7/8 8 5/8 14 87.812-14 13.88-14.06 411-00139207-003 .375 7 18 15/16 6 5/8 11 75.2

411-00139208-003 .375 10 18 15/16 6 5/8 14 90.5

Material SpecificationsSLEEVE: ASTM A-53, ASTM A512 or carbon steel having a

minimum yield of 30,000 psi. Fusion bonded epoxyprovides an average 12 mil protective coating and is FDA approved for potable water systems.

FOLLOWERS: Ductile iron ASTM A-536 or steel AISI C1020. Designed for high strength/weight ratio. Follower thickness determined by coupling size.

BOLTS High-strength, low-alloy steel with heavy semi-& NUTS: finished hexagon nuts. GASKETS: Nitrile (Buna N) NSF® 61 compounded to produce

superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals.Temperatures range: -20°F. to 180°F (consult manufacturer for specific applications or other service temperatures).

FINISH: Fusion bonded Flexi-Coat® Epoxy per AWWAC213.


A D

L

B

DimensionsA: Sleeve wall thicknessB: Sleeve lengthD: Overall coupling

diameterL: Overall coupling

length

11

Standard and Long Length Sleeves 14” thru 24”Nom.Pipe

Size In.

PipeO.D.

InchesCatalog No. ***

SleeveThk. X Lgth. In. Flange O.D.

Inches(D)

Bolts Approx.Ship


14 15.30411-00153007-003 3/8 7 19 7/8 8 5/8 11 86411-00153008-003 3/8 10 19 7/8 8 5/8 14 107411-00153015-003 3/8 16 19 7/8 8 5/8 20 144411-00153016-003 3/8 24 19 7/8 8 5/8 28 196

14 15.65411-00156507-003 3/8 7 20 3/16 8 5/8 11 88411-00156508-003 3/8 10 20 3/16 8 5/8 14 109411-00156515-003 3/8 16 20 3/16 8 5/8 20 146411-00156516-003 3/8 24 20 3/16 8 5/8 28 200

16 17.40411-00174007-003 3/8 7 21 15/16 8 5/8 11 92411-00174008-003 3/8 10 21 15/16 8 5/8 14 119411-00174015-003 3/8 16 21 15/16 8 5/8 20 160411-00174016-003 3/8 24 21 15/16 8 5/8 28 218

16 17.80411-00178007-003 3/8 7 22 3/8 8 5/8 11 93411-00178008-003 3/8 10 22 3/8 8 5/8 14 120411-00178015-003 3/8 16 22 3/8 8 5/8 20 162411-00178016-003 3/8 24 22 3/8 8 5/8 28 221

18 19.50411-00195007-003 3/8 7 24 1/16 10 5/8 11 107411-00195008-003 3/8 10 24 1/16 10 5/8 14 133411-00195015-003 3/8 16 24 1/16 10 5/8 20 179411-00195016-003 3/8 24 24 1/16 10 5/8 28 245

18 19.92411-00199207-003 3/8 7 24 1/2 10 5/8 11 109411-00199208-003 3/8 10 24 1/2 10 5/8 14 135411-00199215-003 3/8 16 24 1/2 10 5/8 20 182411-00199216-003 3/8 24 24 1/2 10 5/8 28 249

20 21.60411-00216007-003 3/8 7 26 1/8 10 5/8 11 117411-00216008-003 3/8 10 26 1/8 10 5/8 14 145411-00216015-003 3/8 16 26 1/8 10 5/8 20 195411-00216016-003 3/8 24 26 1/8 10 5/8 28 266

20 22.06411-00220607-003 3/8 7 26 5/8 10 5/8 11 119411-00220608-003 3/8 10 26 5/8 10 5/8 14 148411-00220615-003 3/8 16 26 5/8 10 5/8 20 200411-00220616-003 3/8 24 26 5/8 10 5/8 28 271

24 25.80411-00258007-003 3/8 7 30 3/8 12 5/8 11 138411-00258008-003 3/8 10 30 3/8 12 5/8 14 171411-00258015-003 3/8 16 30 3/8 12 5/8 20 231411-00258016-003 3/8 24 30 3/8 12 5/8 28 315

24 26.32411-00263207-003 3/8 7 30 7/8 12 5/8 11 140411-00263208-003 3/8 10 30 7/8 12 5/8 14 174411-00263215-003 3/8 16 30 7/8 12 5/8 20 235411-00263216-003 3/8 24 30 7/8 12 5/8 28 321

The basic design of bolted compression couplings does not provide for anchoring the pipes against pull-out. Suit able anchorage must beprovided when excessive pipe movement could cause the pipe to move out of the coupling.

NOTE: Coupling working pressures depend on many variables such as pipe type, pipe diameter, sleeve thickness, sleeve material,gasket cross section, follower type and number of bolts. Consult Smith-Blair regarding your specific coupling pressure requirements.

411 Steel Couplings (Standard & Long)for Cast Iron Pipe Sizes

A D

L

B

DimensionsA: Sleeve wall thicknessB: Sleeve lengthD: Overall coupling

diameterL: Overall coupling

length

***The last three numbers of the cat alog number indicate the type of gasket. (Buna N) gaskets are furnished as standard.BUNA-N - 003 BUNA-N Protected -015

(with brass spring molded into leading edge)

12

Nom.Pipe

Size In.

PipeO.D.

Inches

SleeveThk. X Lgth

(A) (B)Inches

FollowerFlange O.D.

Inches

BoltsCatalog Number

Approx.Ship

Wt. Lbs.No. Dia. x Lgth(L)

30 30.00

1/4 x 7 34 7/16 12 5/8 x 11 411-00300002-003 1321/4 x 10 34 7/16 12 5/8 x 14 411-00300003-003 1523/8 x 7 34 7/16 12 5/8 x 11 411-00300007-003 155

3/8 x 10 34 7/16 12 5/8 x 14 411-00300008-003 1871/2 x 10 34 7/16 12 5/8 x 14 411-00300009-003 221

30 30.50

1/4 x 7 34 15/16 12 5/8 x 11 411-00305002-003 1331/4 x 10 34 15/16 12 5/8 x 14 411-00305003-003 1543/8 x 7 34 15/16 12 5/8 x 11 411-00305007-003 157

3/8 x 10 34 15/16 12 5/8 x 14 411-00305008-003 1891/2 x 10 34 15/16 12 5/8 x 14 411-00305009-003 224

30 31.74

1/4 x 7 36 3/16 14 5/8 x 11 411-00317402-003 1391/4 x 10 36 3/16 14 5/8 x 14 411-00317403-003 1633/8 x 7 36 3/16 14 5/8 x 11 411-00317407-003 164

3/8 x 10 36 3/16 14 5/8 x 14 411-00317408-003 1981/2 x 10 36 3/16 14 5/8 x 14 411-00317409-003 235

30 32.00

1/4 x 7 36 7/16 14 5/8 x 11 411-00320002-003 1401/4 x 10 36 7/16 14 5/8 x 14 411-00320003-003 1643/8 x 7 36 7/16 14 5/8 x 11 411-00320007-003 166

3/8 x 10 36 7/16 14 5/8 x 14 411-00320008-003 2011/2 x 10 36 7/16 14 5/8 x 14 411-00320009-003 237

30 34.00

1/4 x 7 38 7/16 14 5/8 x 11 411-00340002-003 1481/4 x 10 38 7/16 14 5/8 x 14 411-00340003-003 1733/8 x 7 38 7/16 14 5/8 x 11 411-00340007-003 175

3/8 x 10 38 7/16 14 5/8 x 14 411-00340008-003 2111/2 x 10 38 7/16 14 5/8 x 14 411-00340009-003 250

36 36.00

1/4 x 7 40 7/16 16 5/8 x 11 411-00360002-003 1581/4 x 10 40 7/16 16 5/8 x 14 411-00360003-003 1843/8 x 7 40 7/16 16 5/8 x 11 411-00360007-003 183

3/8 x 10 40 7/16 16 5/8 x 14 411-00360008-003 2251/2 x 10 40 7/16 16 5/8 x 14 411-00360009-003 266

36 36.50

1/4 x 7 40 15/16 16 5/8 x 11 411-00365002-003 1591/4 x 10 40 15/16 16 5/8 x 14 411-00365003-003 1863/8 x 7 40 15/16 16 5/8 x 11 411-00365007-003 188

3/8 x 10 40 15/16 16 5/8 x 14 411-00365008-003 2271/2 x 10 40 15/16 16 5/8 x 14 411-00365009-003 269

36 36.63

1/4 x 7 41 1/16 16 5/8 x 11 411-00366302-003 1601/4 x 10 41 1/16 16 5/8 x 14 411-00366303-003 1873/8 x 7 41 1/16 16 5/8 x 11 411-00366307-003 189

3/8 x 10 41 1/16 16 5/8 x 14 411-00366308-003 2281/2 x 10 41 1/16 16 5/8 x 14 411-00366309-003 270

36 37.96

1/4 x 7 42 13/32 16 5/8 x 11 411-00379602-003 1621/4 x 10 42 13/32 16 5/8 x 14 411-00379603-003 1893/8 x 7 42 13/32 16 5/8 x 11 411-00379607-003 191

3/8 x 10 42 13/32 16 5/8 x 14 411-00379608-003 2301/2 x 10 42 13/32 16 5/8 x 14 411-00379609-003 272

Large steel couplings provide a method of simplifyingmany pipe fitting problems and protecting pipelines fromvarious environmental conditions. They are cost ef fectiveagainst flanged or welded joints.

Consult Smith-Blair engineers for assist ance inselecting couplings for large pipelines or specialapplications.

Large Diameter Pipe - Standard Length Sleeves

411 Steel Couplings for Large Diameter

The basic design of bolted compression couplings does not provide for anchoring the pipes against pullout. Suit able anchorage must be providedwhen excessive pipe movement could cause the pipe to move out of the coupling.

Note: Coupling working pressure depends on many variables such as pipe type, pipe diameter, sleeve thickness, sleeve material, gasketcross section, follower type and number of bolts. Consult Smith-Blair regarding your specific coupling pressure requirements.

13

Nom.Pipe

Size In.

PipeO.D.

Inches

SleeveThk. X Lgth

(A) (B) Inches

FollowerFlange O.D.

Inches

BoltsCatalog Number

Approx.Ship

Wt. Lbs.No. Dia. x Lgth (L)

36 38.30

1/4 x 7 42 3/4 16 5/8 x 11 411-00383002-003 1661/4 x 10 42 3/4 16 5/8 x 14 411-00383003-003 1943/8 x 7 42 3/4 16 5/8 x 11 411-00383007-003 196

3/8 x 10 42 3/4 16 5/8 x 14 411-00383008-003 2371/2 x 10 42 3/4 16 5/8 x 14 411-00383009-003 281

42 42.00

1/4 x 7 46 1/2 18 5/8 x 11 411-00420002-003 1231/4 x 10 46 1/2 18 5/8 x 14 411-00420003-003 2143/8 x 7 46 1/2 18 5/8 x 11 411-00420007-003 216

3/8 x 10 46 1/2 18 5/8 x 14 411-00420008-003 2621/2 x 10 46 1/2 18 5/8 x 14 411-00420009-003 310

42 42.50

1/4 x 7 47 18 5/8 x 11 411-00425002-003 1861/4 x 10 47 18 5/8 x 14 411-00425003-003 2153/8 x 7 47 18 5/8 x 11 411-00425007-003 220

3/8 x 10 47 18 5/8 x 14 411-00425008-003 2631/2 x 10 47 18 5/8 x 14 411-00425009-003 312

42 42.75

1/4 x 7 47 1/4 18 5/8 x 11 411-00427502-003 1871/4 x 10 47 1/4 18 5/8 x 14 411-00427503-003 2163/8 x 7 47 1/4 18 5/8 x 11 411-00427507-003 221

3/8 x 10 47 1/4 18 5/8 x 14 411-00427508-003 2641/2 x 10 47 1/4 18 5/8 x 14 411-00427509-003 315

42 44.20

1/4 x 7 48 11/16 18 5/8 x 11 411-00442002-003 1901/4 x 10 48 11/16 18 5/8 x 14 411-00442003-003 2253/8 x 7 48 11/16 18 5/8 x 11 411-00442007-003 225

3/8 x 10 48 11/16 18 5/8 x 14 411-00442008-003 2751/2 x 10 48 11/16 18 5/8 x 14 411-00442009-003 325

42 44.50

1/4 x 7 49 18 5/8 x 11 411-00445002-003 1931/4 x 10 49 18 5/8 x 14 411-00445003-003 2283/8 x 7 49 18 5/8 x 11 411-00445007-003 228

3/8 x 10 49 18 5/8 x 14 411-00445008-003 2781/2 x 10 49 18 5/8 x 14 411-00445009-003 329

48 48.00

1/4 x 7 52 1/2 20 5/8 x 11 411-00480002-003 2081/4 x 10 52 1/2 20 5/8 x 14 411-00480003-003 2453/8 x 7 52 1/2 20 5/8 x 11 411-00480007-003 246

3/8 x 10 52 1/2 20 5/8 x 14 411-00480008-003 2991/2 x 10 52 1/2 20 5/8 x 14 411-00480009-003 354

48 48.75

1/4 x 7 53 1/4 20 5/8 x 11 411-00487502-003 2121/4 x 10 53 1/4 20 5/8 x 14 411-00487503-003 2493/8 x 7 53 1/4 20 5/8 x 11 411-00487507-003 246

3/8 x 10 53 1/4 20 5/8 x 14 411-00487508-003 3031/2 x 10 53 1/4 20 5/8 x 14 411-00487509-003 358

48 50.50

1/4 x 7 55 20 5/8 x 11 411-00505002-003 2171/4 x 10 55 20 5/8 x 14 411-00505003-003 2553/8 x 7 55 20 5/8 x 11 411-00505007-003 258

3/8 x 10 55 20 5/8 x 14 411-00505008-003 3121/2 x 10 55 20 5/8 x 14 411-00505009-003 372

48 50.80

1/4 x 7 55 5/16 20 5/8 x 11 411-00508002-003 2201/4 x 10 55 5/16 20 5/8 x 14 411-00508003-003 2603/8 x 7 55 5/16 20 5/8 x 11 411-00508007-003 261

3/8 x 10 55 5/16 20 5/8 x 14 411-00508008-003 3171/2 x 10 55 5/16 20 5/8 x 14 411-00508009-003 375

54 57.10

1/4 x 7 61 19/32 24 5/8 x 11 411-00571002-003 2381/4 x 10 61 19/32 24 5/8 x 14 411-00571003-003 2863/8 x 7 61 19/32 24 5/8 x 11 411-00571007-003 292

3/8 x 10 61 19/32 24 5/8 x 14 411-00571008-003 3491/2 x 10 61 19/32 24 5/8 x 14 411-00571009-003 414

Large Diameter Steel and Cast Iron Pipe - Standard Length Sleeves

411 Steel Couplings for Large Diameter

The basic design of bolted compression couplings does not provide for anchoring the pipes against pullout. Suitable anchorage must be providedwhen excessive pipe movement could cause the pipe to move out of the coupling.

Note: Coupling working pressure depends on many variables such as pipe type, pipe diameter, sleeve thickness, sleeve material, gasketcross section, follower type and number of bolts. Consult Smith-Blair regarding your specific coupling pressure requirements.

14

Smith-Blair can produce couplings to fit any sizepipe up to a 200 inch diameter .

Pressure and other service conditions of penstockrequire the coupling design to be modified to fit therequirements for each individual penstock. Smith-Blairengineers should be consulted for recommendations.

Where needed, Smith-Blair personnel are available forassistance in field supervision of the installation of penstockcouplings or other large size couplings.

Penstock Couplings

The final bolts are tightened during the last steps of installing a Smith-Blair coupling.

Penstock coupled with 190-inch Smith-Blair couplings.

15

Nom.PipeSizeIn.

*MaximumCouplingTransitionRange In.

Dimensions Bolts Approx. Ship

Wt.Lbs.

SleeveLength(B) In.

SleeveThick.Inches

No. Dia.In.

Lgth.In. (L)

2 2.07-2.81 5 .216 2 5/8 8 82-3 2.69-3.88 5 .227 2 5/8 8 9 1/23-4 3.44-4.88 5 .258 3 5/8 8 134-5 4.74-5.84 5 .280 4 5/8 8 20 1/25-6 5.47-6.99 5 .301 5 5/8 8 23 1/26 6.57-7.26 5 .322 5 5/8 8 27 3/48 7.94-8.75 5 .342 6 5/8 8 33 1/28 7.94-9.25 5 3/8 6 5/8 8 40 1/28 8.56-9.45 5 3/8 6 5/8 8 40 1/2

8-10 9.00-10.38 5 3/8 7 5/8 8 4110 9.88-10.84 5 1/4 8 5/8 8 32 3/410 10.63-11.50 5 3/8 7 5/8 8 46

10-12 11.00-12.06 5 3/8 7 5/8 8 47 1/212 11.88-13.10 5 3/8 8 5/8 8 52 1/412 12.63-13.70 5 3/8 8 5/8 8 56 1/2

12-14 13.88-14.50 5 3/8 6 5/8 8 6214 15.30-15.65 7 3/8 8 5/8 11 8616 17.40-17.80 7 3/8 8 5/8 11 9618 19.50-19.92 7 3/8 10 5/8 11 10820 21.60-22.06 7 3/8 10 5/8 11 11824 25.80-26.32 7 3/8 12 5/8 11 140

Nom.PipeSizeIn.

*MaximumCoupling

Transition In.

Dimensions Bolts Approx. Ship

Wt.Lbs.

SleeveLengthIn. (B)

SleeveThick.Inches

No. Dia.In.

Lgth.In. (L)

14 14.00 to 15.30 12 3/8 8 5/8 15 11016 16.00 to 17.40 12 3/8 8 5/8 15 12518 18.00 to 19.50 12 3/8 8 5/8 15 14520 20.00 to 21.60 12 3/8 10 5/8 15 16024 24.00 to 25.80 12 3/8 12 5/8 15 18030 30.00 to 32.00 12 3/8 14 5/8 15 21536 36.00 to 38.30 12 3/8 16/END 5/8 4.5 26042 42.00 to 44.50 12 3/8 18/END 5/8 4.5 31548 48.00 to 50.80 12 3/8 20/END 5/8 4.5 350

413 Transition Coupling - Expanded Sleeve

413 Transition Coupling - Straight SleeveSmith-Blair 413 Steel Transition Couplings can beused to connect pipes of different outside diameters whenthe maximum O.D. variation does not exceed the listedcoupling O.D. range.

How to Order:The outside diameters of both pipes to be coupled

must be within a listed “Maximum Coupling TransitionRange.” If both pipe O.D.’ s are not within a listedtransition range, please consult listings for 415 couplings.The description necessary to order a 413 Couplingconsists of the number 413, followed by the EXACToutside diameters of the two pipes to be connected and adescription of the type of gaskets, bolts, and finish desired(gaskets, alloy bolt s, and epoxy finish are consideredstandard.) Example: To couple a 6” Cast Iron pipe, 6.90” O.D. to a 6”Steel pipe 6.63” O.D., with gaskets, alloy bolts, and epoxyfinish, the ordering description would be:413-6.90”--6.63”--gaskets, alloy bolts, and epoxy finish.

Remember to order by stating the exact pipe O.D.’s. Do NOT state thelisted transition.Material Specifications: See 415’s on page 16.

413 Steel Transition Couplings

Straight Sleeve

Expanded Sleeve

O.D. of larger pipe O.D. of smaller pipe

B

O.D. of larger pipe O.D. of smaller pipe

B

*Longer sleeve available on request.Most transitions available on request, up to 10% change in diameter .Consult Smith-Blair engineers for details.Remember to order by stating the exact pipe O.D.’s. Do NOT state thelisted transition.Material Specifications: See 415’s on page 16.

16

415 Steel Reducing Couplings

Large Pipe End

Nom. PipeSize In.

Pipe O.D. RangeInches

SleeveThickness (A)

In.

*Approx.Ship

Wt. Lbs.6 5.00-7.49 .322 328 7.50-8.49 .342 359 8.50-9.49 1/4 38

10 9.50-10.49 1/4 4411 10.50-11.49 1/4 4712 11.50-12.49 1/4 5613 12.50-13.49 1/4 6014 13.50-14.49 1/4 7115 14.50-15.49 1/4 7916 15.50-16.49 1/4 8517 16.50-17.49 1/4 9118 17.50-18.49 1/4 9719 18.50-19.49 1/4 10520 19.50-20.99 1/4 11422 21.00-22.99 1/4 12924 23.00-24.99 1/4 14226 25.00-26.99 1/4 15628 27.00-28.99 1/4 17530 29.00-30.99 1/4 18932 31.00-32.99 1/4 20734 33.00-34.99 1/4 22536 35.00-36.99 1/4 25838 37.00-38.99 1/4 27940 39.00-40.99 3/8 29842 41.00-42.99 3/8 33644 43.00-44.99 3/8 35946 45.00-46.99 3/8 38448 47.00-48.99 3/8 407

Small Pipe End

Nom. PipeSize In.

Pipe O.D. RangeInches

SleeveThickness (B)

In.

*Approx.Ship

Wt. Lbs.4 3.50-4.49 .258 135 4.50-5.49 .280 166 5.50-6.49 .301 207 6.50-7.49 .322 208 7.50-8.49 1/4 219 8.50-9.49 1/4 23

10 9.50-10.49 1/4 2411 10.50-11.49 1/4 3012 11.50-12.49 1/4 3113 12.50-13.99 1/4 3414 13.50-14.99 1/4 4016 15.00-16.99 1/4 4518 17.00-18.99 1/4 5420 19.50-20.99 1/4 6822 21.00-22.99 1/4 7024 23.00-24.99 1/4 8126 25.00-26.99 1/4 9828 27.00-28.99 1/4 10130 29.00-30.99 1/4 10332 31.00-32.99 1/4 10534 33.00-34.99 1/4 11636 35.00-36.99 1/4 11838 37.00-38.99 1/4 12440 39.00-40.99 3/8 13042 41.00-42.99 3/8 13844 43.00-44.99 3/8 15046 45.00-46.99 3/8 156

Smith-Blair 415 Steel Reducing Couplings are used forconnecting pipe with a large difference in outside diameters.Where the variation in O.D.’ s can be accommodated with413 straight or exp anded design, the Reducing Couplinglength is approximately 1 1 inches. Where the variation inO.D.’s exceeds 413 exp anded design limit s, the couplingoverall length is approximately 15 inches.

How to Order:Refer to the Large Pipe and Small Pipe O. D. Range

columns to insure that the two pipe O. D.s you want tocouple are listed. The description necessary to order a 415Reducing Coupling consists of the number 415, followed bythe E XACT outside d iameter o f t he t wo p ipes t o b econnected, and a description of the type of gasket s, bolts,and finish desired (gasket s, alloy bolt s and epoxy areconsidered standard).Example: When coupling an 18” Steel Pipe 18.00” O. D. toa 14” Cast Iron Pipe, 15.30” O. D., the coupling is to havegasket, alloy bolts, and epoxy finish, the ordering descriptionwould be:

415-18.00”--15.30”--gaskets, alloy bolts and epoxy finish.

Remember to order by stating the exact pipe O.D.’s. Do NOT state the listed O.D. ranges. Larger Sizes available upon request. S pecify if pipe stops are required. *Add together for total weight. Larger sizes available upon requ estCheck 413 ranges first if O. D. dif ference is 2” or less.

Material SpecificationsSLEEVE: ASTM A-53, ASTM A-513 or carbon steel having

a minimum yield of 30,000 psi.FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 steelGASKETS: Nitrile (Buna-N)-NSF®61-Compounded to produce

superior storage and performance characteristicswhile resisting water, acids, alkalies, most

(aliphatic) hydrocarbons and many other chemicals.Temperature range -20°F to 180°F. Consult manufacturer for specific applications or other service temperatures.

BOLTS & NUTS: High-Strength, low alloy steel with heavy, semi-finished hexagon nuts.



Reducing couplings must berestrained to prevent the linepressure from causing the couplingto move off of the joint.

A B

Also available with pipestops on special order.

17

416 Steel Insulating Couplings

Smith-Blair’s 416 Insulating Coupling for metal pipeconnects and seals ef fectively on the same principle as thestraight couplings. Utilizing an insulating boot, the 416 alsostops the flow of electrical current along the pipe. The bootextends over one pipe-end well beyond the end of the coupling,thereby breaking any metal contact between the pipe-ends. Useof the 416 is recommended where the travel of electrical currentis hazardous or damaging to the system. Insulating couplingsare available in reducing sizes on special orders.

NomPipe

Size In.

CouplingO.D. Range

InchesCatalog No.

Sleeve Dimensions OverallDiameter

In. (D)

OverallDiameter

In. (L)

Bolts Approx.Ship

Wt. Lbs.Sleeve

Thk. (A)Sleeve

Lgth. (B) Qty. Dia. In. Lgth.2 2.32-2.44 416-00238011-003 .216 5 6 1/4 8 1/2 2 5/8 8 1/2 6

2 1/2 2.82-2.94 416-00288011-003 .226 5 6 1/2 7 1/2 2 1/2 7 3/8 103 3.44-3.56 416-00350011-003 .237 5 7 8 1/2 2 5/8 8 1/2 114 3.94-4.06 416-00400011-003 .258 5 8 1/4 8 1/2 3 5/8 8 1/2 14 1/2 4 4.44-4.56 416-00450011-003 .258 5 8 1/4 8 1/2 3 5/8 8 1/2 15 1/2 5 5.44-5.62 416-00556011-003 .280 5 9 1/2 8 1/2 4 5/8 8 1/2 18 1/2 6 5.94-6.06 416-00600011-003 .301 5 10 5/8 8 1/2 5 5/8 8 1/2 23 1/2 6 6.57-6.69 416-00663011-003 1/4 5 11 3/8 8 1/2 5 5/8 8 1/2 268 7.94-8.06 416-00800011-003 1/4 5 12 1/2 8 1/2 6 5/8 8 1/2 318 8.57-8.75 416-00863011-003 1/4 7 13 3/16 11 6 5/8 11 38 1/2 10 10.69-10.85 416-01075071-003 3/8 7 15 9/16 11 7 5/8 11 4112 12.69-12.88 416-01275071-003 3/8 7 17 3/16 11 8 5/8 11 4314 13.94-14.13 416-01400071-003 3/8 7 18 3/4 11 6 5/8 10 3/4 7216 15.94-16.13 416-01600071-003 3/8 7 20 3/4 11 8 5/8 11 8418 17.94-18.13 416-01800071-003 3/8 7 22 3/4 11 8 5/8 11 9220 19.88-20.09 416-02000071-003 3/8 7 24 3/4 11 10 5/8 11 10322 21.88-22.09 416-02200071-003 3/8 7 26 3/4 11 10 5/8 11 11224 23.88-24.09 416-02400071-003 3/8 7 28 3/4 11 10 5/8 11 121

Larger sizes available upon request.


a minimum yield of 30,000 psi.FOLLOWERS: Ductile Iron ASTM A536 or AISI C 1020 steelGASKETS: Nitrile (Buna-N)-NSF®61-Compounded to produce

superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals.Temperature range -20°F to 180°F. Consult manufacturer for specific applications or other service temperatures.




Insulating bootslipped over pipe-end

L

D

B

Nom.Size

Inches

*O.D.Inches

TapSize I.P.ThreadInches

SleeveLength(B) In.

Catalog Number

Approx.ShipWt.Lbs.

3/4 1.02-1.08 3/4 5 418-00010506-003 41 1.26-1.38 1 5 418-00013208-003 5

1 1/4 1.60-1.72 1 1/4 5 418-00016610-003 71 1/2 1.84-1.96 1 1/2 6 416-00019012-003 7

2 2.32-2.44 2 6 418-00023814-003 102 2.44-2.56 2 6 418-00025014-003 10

418 Cast Tee Couplingfor Small Diameter Pipe

Material SpecificationsTEE SLEEVE: Gray iron ASTM A-126 or Ductile Iron ASTM

A-536. Ends have a smooth inside t aper for uniform gasket seating.

FOLLOWER: Malleable iron ASTM A-47 Grade 32510 or DuctileIron ASTM A536. Designed for high strength/ weight ratio. Follower thickness determined by coupling size.

GASKETS: Nitrile (Buna-N)-NSF®61-Compounded to producesuperior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbons and many other chemicals.Temperature range -20°F to 180°F. Consult manufacturer for specific applications or other service temperatures.




To order a 416 with two insulating boot s (optional), change the end code to 2-003Example: 416-00238012-003

18

481 Steel Pipe End Cap

Smith-Blair Steel Pipe End Caps are e asy t oremove, re-install and block. They are an ideal means ofcapping the line for testing, and they also make adependable pipe end seal for permanent inst allation. Anoffset outlet is conveniently located to allow for blow-off ordraining the line.

Other sizes available upon request.Pipe end caps must be securely blocked or anchored to prevent them from moving of f of the pipe.

Nom.Pipe

Size In.

PipeO.D.

InchesCatalog Number

Overall DiameterInches

(D)

Overall LengthInches

(L)

Approx.ShippingWt. Lbs.

2 2.50 481-02500114-003 6.20 7.94 10

3

3.74 481-03740114-003 7.30 7.94 113.80 481-03800114-003 7.06 8.19 12 1/23.88 481-03880114-003 7.06 8.19 12 1/23.96 481-03960114-003 7.53 8.19 12 3/4

4 4.64 481-04640114-003 8.13 8.19 17 1/26 6.90 481-06900114-003 10.56 8.19 289 9.05 481-09050114-003 13.44 8.19 39

1011.10 481-11100114-003 15.13 8.19 45 1/211.40 481-11400114-003 15.13 8.19 5311.66 481-11660114-003 16.50 8.19 53 1/2

1213.20 481-13200114-003 17.47 8.31 53 1/213.50 481-13500114-003 17.47 8.31 58 3/413.92 481-13920114-003 18.31 8.31 73

14 15.30 481-15300114-003 19.75 8.31 8915.65 481-15650114-003 20.10 8.31 92

16 17.40 481-17400114-003 21.84 8.31 92 1/417.80 481-17800114-003 22.25 8.31 92 1/2

18 19.50 481-19500114-003 24.00 8.31 12219.92 481-19920114-003 24.40 8.31 125

20 21.60 481-21600114-003 26.30 8.31 13622.06 481-220060114-003 26.50 8.31 138


a minimum yield of 30,000 psi.END PLATE: Mild steel with a 2” I.P. threaded outlet. Other

outlet sizes available upon request.FOLLOWERS: Ductile Iron ASTM A536 or AISI C1020 steelGASKETS: Nitrile (Buna-N)-NSF®61-Compounded to produce

superior storage and performance characteristicswhile resisting water, acids, alkalies, most

(aliphatic) hydrocarbons and many other chemicals.Temperature range -20°F to 180°F. Consult manufacturer for specific applications or other service temperatures.




D

L

Low alloy steel bolt and heavy hex nut.

Flared type steel sleeve

End Plate

Wedge type gasket

19

Smith-Blair Bolted Couplings are referred to as“Flexible Couplings” or “Mechanical Joint s.” They providea flexible, strong, leak-resistant joint. Flexible couplings aredesigned to float on the pipeline; therefore stressesresulting from exp ansion, contraction and deflection arerelieved. The ability of the coupling to absorb deflectionpermits the laying of pipelines on curves and grades usingstraight lengths of pipe.

The recommended optimum gap between pipe endsmust be carefully followed to obt ain the tot al angulardeflection per joint.

SleeveLength

OptimumGap

Max. Gap & No PipeMovement

5"127mm

1/4" - 1/2" 6.4mm-12.8mm

2"50mm

7"178mm

1/2" - 3/4" 12.8mm-19.1mm

3"75mm

10"250mm

1/2" - 1 1/4"12.8mm-31.8mm

4 1/2"114mm

Longer sleeve lengths provide an easy means of joining plain end pipewhich has a wider than normal gap.

PIPE TOO FAR APARTPIPE TOO CLOSE

Expansion and very limited deflection available. No contractionavailable. If a gap between the pipe such as above cannot beavoided, a long sleeve coupling should be used.

Properly Installed Coupling

Improperly Installed Couplings

Bolted Coupling Application

Contraction and very limited deflection available. No expansionavailable.

This product does not restrain axial

pipe movement!!WARNING

20

Lateral Offset Per Degree of Deflection At Distances Indicated

Pipeline Curve PlottingThe length of pipe sections and angular deflection allowances for any given radius can be calculated by using the formulasabove. Lateral offset and angular deflection may also be determined from the charts above. Careful planning of pipe lengthand deflection can allow the use of st andard fittings and eliminate the need for expensive “special” fittings or timeconsuming excavation of the pipe bed.

Total Angular Deflection Per JointFor Pipe O.D. Ranges Sleeve Length

Inches mm 5"127mm

7"178mm

10"250mm

0.84 thru 2.38 21 thru 60.5 7º 7º 7º2.50 thru 13.50 63.5 thru 342.9 4º 4½º 4½º13.60 thru 24.00 345.4 thru 610 2½º 4º 4½º24.10 thru 36.00 612 thru 914 2º 3½º 4º36.10 thru 42.00 917 thru 1067 - 3º 3½º42.10 thru 60.00 1323 thru 1524 - 2½º 3º60.10 thru 80.00 1527 thru 2032 - - 2½º80.10 thru 100.00 2035 thru 2540 - - 2º

Maximum recommended deflection forlaying couplings on initial installations.Some slightly greater angulardeflection can be obt ained, but is notrecommended for design purposes.For flanged coupling adapters, use 1/2the deflection shown per joint. Meets or exceeds AWWA C-219Section 3.

1°2°3°4°5°6°

7°

Degrees ofDeflection 1 5 10 20 40

Distance in Feet

Late

ral O

ffset

in In

ches

.209

.837

.418

.628

1.04

1.25

1.46

1.04

2.09

3.14

4.18

5.22

6.25

7.30

2.09

4.18

8.37

10.45

12.50

14.60

4.18

8.36

12.56

16.74

20.90

25.08

29.20

6.28

8.36

16.72

25.12

33.48

41.80

50.16

58.40

411 Steel Coupling Angular Deflection

ß=Nα where:ß=Total angular deflection of pipeline (degrees)N=Number of couplingsα=Degrees of deflection per coupling

R=L / 2TANα where:L=Length of pipe sectionR=Radius of curve

M=L SINα where:M=Distance each pipe section is of fset from

centerline

Formulas ß

M

αL

R

R

R

21

Expansion and Contraction

Couplings are capable of absorbing up to 3/8” (9.5mm) axial pipe movement.

3/8” (9.5mm) pipe movement is equal to the expansion orcontraction of a 40 foot(12m) length of carbon steel piperesulting from a 120ºF. (38 C.) degree temperature change.

Accommodating pipe movement is a function of the couplinggaskets.

Buried or above ground pipelines may be joined usingflexible couplings. The basic design of flexible couplingsdoes not provide for anchoring the pipe in the coupling. Fordesign purposes, the resist ance to pipe pullout or holdingstrength must be considered to be zero. Suit able supportand anchorage must be provided to resist those forces thatcould cause the pipe to move out of the coupling.

Above ground pipelines must be properly supportedand be suitably harnessed or anchored at each flexiblecoupling.

The illustrations to the right show how mechanically coupledpipelines should be supported and anchored. Supports mustbe designed to carry the weight of the pipe and it s contentsand must also have the cap ability of preventing tot al pipemovement from accumulating in any one coupling.

Anchors are to be located at the terminal point s of thepipeline, or where there is a change in direction. Anchors(thrust blocks) should be designed with a suit able safetyfactor to withst and the result ant forces of internal linepressure.

Support for 6 inch (150mm) and smaller diameter pipein pipe length up to 20 ft. (6m) suitable for any pressure.Pipe must be tied to each support to accommodate highpressures and to isolate the pipe movement resultingfrom expansion/contraction in each length of pipe.

Support for 6 to 16 inch (150m to 400mm) diameterpipe in length to 20 f t. (6m) at pressures not to exceed25 psi (1.7 Bar). Pipe to be tied to each support.

Support for pipes any size in length to 40 ft. (12m)Suitable for any pressure. Each length to be tied to onesupport to allow for exp ansion/contraction and isolatemovement to each length of pipe. For use only whereterrain is relatively level.

Supporting and Anchoring Coupled Pipelines

CouplingSize

Total Axial Pipe MovementPer Each Coupling

3/4" thru 2"19.5mm thru 50mm

1/8"3.2mm

2 1/2" thru 10 O.D.63.5mm thru 250mm O.D.

1/4" 6.4mm

10 3/4" and up270mm

3/8" 9.5mm

1/2L 1/6L

Couplings

Supports

2/3L2/3L

Couplings

Supports

Couplings

Supports

22

Supporting and Anchoring Coupled Pipelines

Ring Girder Support Saddle Support

Support for all sizes of pipe in length to 40 f t. (12m).Suitable for any pressure. For any terrain includingsteep grades (hillsides). Pipe must be tied to only onesupport.

Support for all sizes of pipe in lengths to 40 f t. (12m).Suitable for any pressure. For any terrain includingsteep grades (hillsides). Pipe must be tied to only onesupport.

Assuming a straight pipeline with the pipe supportedby one of the five foregoing methods, an anchor wouldbe at each end of the pipeline to cont ain the forcescaused by internal pressure. Each length of pipe istied to one support. This permits free axial movementof that pipe but isolates the expansion/contractionmovement within each length of pipe, allowing eachcoupling t o i ndependently a bsorb t he m ovementwithin a single length of pipe. The total pipe movementis prevented from accumulating in any single coupling.The ties from each length of pipe to support need onlybe strong enough to accommodate the dif ferentialtightness of the couplings. The force at any onesupport between anchors caused by movement of thepipe is balanced and the net force is practically zero.

Typical Ring Girder Installation.

This product does not restrain axial pipe

movement!WARNING

23

Unbalanced forces occur where the pipeline has achange in direction. Properly comp acted, good stable soilis normally sufficient to restrain these forces. Straight runsof buried pipeline in stable soil do not usually requireharnessing or other anchoring.

Where there is unst able soil, a bend in the pipeline,lateral connections or a change in direction, suit ableharnessing or anchoring must be provided if calculationsshow the resultant forces could cause the pipe to move outof the coupling.

The illustrations on this page show the location of pipesupports and thrust blocks in relationship to couplings.The couplings highlighted depict where pipe pull out mayoccur due to thrust forces. Two alternate methods of jointrestraint are shown that may be used over the couplings inlieu of thrust blocks.

Anchoring Methods

Pipe to Pipe Harness Assembly Spanning Coupling

Angular Direction Change Branch

Offset Loop

Diagram Key

SupportCouplingAnchor, ThurstBlock or Brace

AlternateCoupling Detail

24

Angular Deflection, Parallel Offset and Lateral Displacement

Provisions must be made for lateral displacement(parallel of fset) wherever there will be dif ferentialsettlement between a structure (tank, building, foundation,etc.) and the pipeline. Such movement can also be causedby the thermal expansion/contraction in a branch line.

Couplings should be used in pairs when they are usedto provide for lateral displacement (parallel offset). A singlecoupling will accommodate very little lateral displacementbecause the coupling is placed in shear .

Lateral displacement is accomplished by angulardeflection of a spool piece (section of pipe) between twocouplings. Two couplings with a length of pipe between actas universal joint s and will allow for lateral movement inany direction.

Displacement can be in any direction, therefore, theallowable movement in any plane is twice thedisplacement.

The length of the spool piece will determine theamount of lateral displacement f or a given angulardeflection. The spool piece length is calculated as follows:

YX= ----------------------------------------------------------

Sine of Allowable Coupling Angle of DeflectionX=Length of spool pieceY=Lateral displacement

The lateral displacement capability of couplings can be used to good advantage to protect pipelines where:

1. Branch ConnectionsA lateral connection (tee) is made to a long pipesubject to thermal exp ansion/contraction. Twocouplings used in the branch connection will relievethe bending stresses. Pipelines entering a building bulk head, foundation orother structure. Two couplings and a spool piece willaccommodate the dif ferential settlement between thepipeline and building.

2. Tank Connections.Two couplings and a spool will accommodate thedifferential settlement between the pipeline and t ank.

3. Risers.Two couplings and a spool will take care of movementin any direction.

Lateral Displacement

Angular Deflection

The natural pipe movementcouplings will allow in any direction.

Parallel Offset

Angular Deflection

Allowable Movement

Spool Piece LateralDisplacement

Angular Deflection

25

Typical Tank Connection

Typical Riser Installation

Angular Deflection, Parallel Offset and Lateral Displacement

Vertical Movement

y

Longitudinal Movement

Coupling

Coupling

x y

x

Harness Assembly

Harness Assembly

Coupling

y

Coupling

LongitudinalMovement

ValveCouplings

Spool Piece Sliding Support

Tank Before Settlement

Tank After Settlement

ValveCouplings in Deflection

Spool Piece Sliding Support

26

Wall Sleeves

Couplings are readily adapt able for use as wallsleeves. Whenever a pipeline must pass through a buildingwall or bulkhead, a wall sleeve should be used. The wallsleeve relieves the stress that expansion/contraction of thepipe exerts against the wall or bulkhead. It provides a bottletight seal against surface water infiltration and facilit atesremoval of the pipeline without damage to the wall.

Carrier PipeCasing (Jacket) Bolt Follower

Gasket

PipeO.D.

BoltFollower

Gasket Pipe O.D.

Bulkhead or Concrete Wall

Water Stop Ring(Optional)

Follower Bolt

Bulkhead or Concrete Wall

Water Stop Ring(Optional)

Pipe O.D.Gasket

Wall Sleeve - Double End

F F

H

H = 2F + Wall Thickness

H = Sleeve LengthF = Distance sleeve is to extend beyond wall

G = F + Wall ThicknessG = Sleeve Length

F = Distance sleeve is to extend beyond wall

L = F1 + F2 + Wall Thickness

L = Sleeve LengthF1 = Distance Sleeve large end is to extend beyond wallF2 = Distance Sleeve small end is to extend beyond wall

Wall Sleeves can be manufactured to fit any size and typeof pipe and any thickness of bulkhead or concrete wallnormally encountered in the piping industry.

L

F1 F2

PipeO.D.

Wall Sleeve - For Jacketed Steamlines

F

G

Wall Sleeve - Single End

27

Helpful Hints

Pipe Tolerances & Dimensions of Plain EndSteel Pipe with Smith-Blair Flexible Couplings.

Sealing SurfaceFor a dist ance of 10 inches (250 mm) from the end of thepipe, the pipe shall be suf ficiently free from flat spot s,indentations, projections, roll marks or pit s to provide asmooth surface for the coupling gasket to seal against tomake a leak-proof joint.

Pipe Ends10-3/4 inch (273mm) and smaller: Plain end pipe shall not bemore than 1/64 inch (.4mm) smaller than the specifiedoutside diameter for a distance of 10 inches (250mm) fromthe end of the pipe and shall permit the passage over theend, for a dist ance of 10 inches (250mm), of a ring gagewhich has a bore 1/16 inch(1.6mm) larger than the specifiedoutside diameter of the pipe.

12 3/4 inch (324mm) to 20 inch (500mm) inclusive: Plain endpipe shall not be more than 1/32 inch (.8mm) smaller thanthe specified out side diameter for a dist ance of 10 inches(250 mm) from the end of the pipe and shall permit passageover end, for a distance of 10 inches (250mm), of a ringgauge which has a bore 3/32 (2.4mm) larger than thespecified outside diameter of the pipe.

22 inch (550mm) and larger : plain end pipe shall not bemore than 1/32 inch (.8mm) smaller nor more than 1/32 inch(.8mm) larger than the specified out side diameter for adistance of 10 inches (250mm) from the end of the pipe, asmeasured with a diameter tape.

The minimum outside pipe diameter shall be determined bycircumferentially applying a steel diameter tape to the pipefor a distance of 10 inches (250mm) from the end of thepipe, as measured with a diameter t ape.

Pipe Tolerances & Dimensions of Plain End Cast Iron Pipe for use

with Smith-Blair flexible couplings.

Sealing SurfaceFor a distance of 10 inches (250mm) from the end, the pipeshall be suf ficiently free from flat spot s, pits or indent ationsto provide a smooth round surface for the coupling gasket toseal against to make a leak-proof joint.

Pipe EndsThe pipe ends shall be furnished with smooth, round, plainends for bolted compression couplings in compliance withAWWA specifcations governing tolerances.

•• Pipe outside diameter 1/2” (12mm) to 16” (400mm) shallnot exceed +/- .06” (1.5mm).•• Pipe outside diameter 16” (400mm) to 24” (600mm) shallnot exceed +/- .08” (2.0mm).•• Pipe outside diameter 24” (600mm) to 42 (1060mm) shallnot exceed +/- .10” (2.5mm).•• Pipe outside diameter larger than 42” (1060mm) shall notexceed +/- .12”/- +/-3.0mm”.

Maximum outside diameter shall permit the p assage for adistance of 10 inches (250mm) from the end of the pipe of aring gauge having a bore .01” (25mm) larger than themaximum allowable outside diameter.

Minimum outside diameter shall be determined bycircumfrentially measuring with a steel diameter t ape for adistance of 10 inches (250mm) from the end of the pipe.

Pipe CoatingsPipe coatings of insuf ficient strength to resist the sealingpressure of the coupling gasket and coatings suf ficientlyporous to permit the line content to seep through the coatingmust be held back from the end of the pipe for a distance of10 inches (250mm) to provide an impermeable surface forthe coupling gasket to seal against.

Information required to order or obtain a quotationTo ensure the product furnished is the most suit able one forthe intended application, the following information isrequired when placing an order or requesting a quot ation:1. Name of product (i.e. Smith-Blair S teel Coupling)2. Product type, if known, (i.e. Smith-Blair 41 1).

Furnish complete catalog number, if known.3. Kind of pipe (cast iron, steel, asbestos cement, etc.)

a. If steel, give wall thickness and pipe O.D.b. If cast iron, give class and pipe O.D.c. If asbestos cement, give class and if it is milled

section, machined end or rough barrel and pipe O.D.d. Other pipe--give complete description including

material, wall thickness, pressure rating, etc. andpipe O.D.

4. Nominal size and exact diameter of pipe.5. Line content (water, raw water, sewage, chemicals, etc.)6. Line pressure (operating pressure and test pressure)7. Any pertinent environmental data (i.e. aggressive soil,.....marshland, etc.8. Type of pipeline (buried, above ground, plant piping, etc.)9. Any special coating or material requirements.10. Quantity desired.Standard Couplings as listed in Smith-Blair’s pricebook, when intended for normal application and service,may be ordered simply by supplying the catalog numberand quantity.

28

Harness Assemblies

Harness assemblies should be used where calculationsshow the forces resulting from a lateral connection, changein direction of the pipeline, unst able soil, thermalexpansion/contraction or other service conditions couldcause the pipe to move out of the coupling.

The angular deflection of the coupling may be restrictedby the use of harness assemblies or anchor studs.

Harness should follow AWWA-M11 manual as a guide.Consult Smith-Blair engineers for more information.

Tie Rod Nut

Lug

Smith-Blair, Inc.Sales and Manufacturing Facility

30 Globe Ave. Texarkana, AR 71854P. O. Box 5337 Texarkana, TX 75505Phone: 870-773-5127 800-643-9705

Fax: 870-773-5212 800-648-6792www.smith-blair.com

Distributed By:

TYPICAL HARNESS ASSEMBLY

SWP/0709/5000

Although SMITH-BLAIR® has employed every effort to presentaccurate information, the technical performance data, installationrecommendations, and specifications in this catalog are presentedmerely as a guide. Each application must be evaluated relative to it sown “special conditions” and should be reviewed by a qualifiedengineer to verify that the stated pressures, temperatures, and otherperformance data are applicable. Anyone making use of thisinformation assumes all liabilities from such use.

WARRANTY: Smith-Blair warrant s its products only against defect s in materialsand workmanship. Smith-Blair’s liability and customer’s exclusive remedy underthis warranty or any warranty extends for a period of one (1) year from the date ofSmith-Blair’s shipment and is expressly limited to repayment of the purchaseprice, rep air, or replacement, at Smith-Blair ’s option, during said period, uponproof satisfactory to Smith-Blair and upon customer ’s returning and rep aying allcharges on such product s to factory or warehouse designated by Smith-Blair .THIS W ARRANTY IS MADE EXPRESSL Y IN LIEU OF ALL OTHERWARRANTIES, EXPRESS, IMPLIED, OR ST ATUTORY, WITH RESPECT TOQUALITY, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.

Warranty

414 - 16”


Lock Couplings

Smith-Blair 414 Lock Couplings are designed as analternative coupling method to harness assemblies for appli-cations where moderate longitudinal stresses are encoun-tered.

They have been used and/or are recommended for:Power plant situations where fluctuating pressures

are present;On tank risers in earthquake prone areas;In sprinkler systems; andAnywhere extra axial holding strenght is required.

Smith-Blair engineers should be consulted for specificlock coupling recommendations to fit “special” applications.

The number and size of anchor studs in a lock couplingare dependent upon coupling size and pressure rating.Anchor studs do not eliminate the need for fixed pipe sup-port. Pipe type and condition will be factors in anchor studperformance.

Smith-Blair Lock Couplings are coated with FusionBonded Flexi-Coat Epoxy per AWWA C213. The coating isapplied through an electrostatic process, which is a positivemethod of obtaining a uniform coating of controlled mil thick-ness with minimum field touch-up required.

Properly selected and installed lock couplings maintainthe continuity of the pipe system, retain the line contentsunder internal pressure and prevent infiltration under vacu-um.

Note: Drilling holes in the pipe for the anchor studsto go through is required.

Smith-Blair Lock Couplings are available in a

wide range of sizes!Smith-Blair Lock Couplings offer many

advantages when installed in a piping system including:Many types of pipe, including pipes of different

materials can be joined. Every joint is a union (a length of pipe can be

removed by disassembling the coupling).Couplings dampen vibration.Couplings can be installed in any environment

(weather is not a factor).No welding required means no fire hazard.

Coupling Material SpecificationsSLEEVE: ASTM A53, ASTM A513 or carbon steel

having a minimum yield of 30,000 psi.FOLLOWERS: Ductile iron ASTM A536 or carbon steel

having a minimum yield of 30,000 psi.BOLTS & NUTS: High-strength, low-alloy steel with heavy

semi-finished hexagon nuts. Optional: Stainless steel and electro-galvanized.

LOCK PINS: Stressproof steel with NPT threads for seal.FINISH: Fusion bonded Flexi-Coat Epoxy per AWWA

C213.OPTION: Other coatings, hardware and materials

available upon request.

Gasket Material SpecificationsSTANDARD:Nitrile (Buna-N)-NSF 61 Compounded to pro-

duce superior storage and performance charac-teristics while resisting water, acids, alkalies,most (aliphatic) hydrocarbons and many otherchemicals. Temperature range -20°F. to 180°F.Consult manufacturer for specific applications orother service temperatures.

OPTION: Nitrile (Buna N) ProtectedA continuous brass spring molded into the lead-ing edge of the gasket to insure metal contactbetween the pipe and the coupling sleeve.Extra protection is given against line contentand the coupling is electrically bonded to thepipe.Other gasket material available upon request.Material Specifications are subject to change.

Nut Bolt Flange

AnchorStud

Sleeve Pipe

Machinery Capacities

2

Smith-Blair, Inc.Sales and Manufacturing Facility

30 Globe Ave. Texarkana, AR 71854P. O. Box 5337 Texarkana, TX 75505

Phone: 1-870-773-5127 or 1-800-643-9705Fax: 1-870-773-5212 or 1-800-648-6792

www.smith-blair.com

Special Fabrications

Smith-Blair, Inc.’s manufacturing capabilities are notlimited to our basic product line. Steel forming, expanding,welding and specialized fabrication of components or con-struction specialties are all within our capabilities.

We can provide high quality fittings and fabricationsmade of a variety of metals. Our modern equipment,including rolls, shears, press brakes and expanders, canfacilitate nearly any forming requirement.

A full range of welding processes enables us to meeta wide variety of custom and code welding requirements.

We have produced special steel forming operations asdiverse as manways for railroad tank cars and 192-inchexpansion joints.

Metal PreperationSmith-Blair, Inc. is capable of glass blasting, wheel

abrading, caustic wash, tumble blasting, chemical passiva-tion (for stainless steel), phosphate conversion coatingand mechanical surface preparation.

Special CoatingsWe offer a variety of primers, epoxies, nylons and

other thermal and ambient cured coatings. Various meth-ods of applications include electro-static guns and fluidizedbed. Thermal and infrared ovens are used to cure coatingsto specifications.

Industries ServedWe serve industries as diverse as pulp and paper, min-

ing, the oil patch, irrigation, water distribution and trans-mission, water and waste water treatment, power genera-tion, flash systems, slurries, aeration piping and naturalgas distribution.

Horizantal RollingMaterial

1-3/15” thick x 72” wide

Vertical RollingMaterial

2” thick x 10” wide

Angle/Bar RollingMaterial

up to 6” thick x 3/4” wide

ShearingMaterial

5/8” thick x 12’ wide

ExpansionCapacities to 400 ton

Certified WeldingCarbon Steel and Stainless

Steel 4 GA to 2” thick


OMNICoupling System

441, 442 & 482

TM

Meets AWWA C-219. Certified to NSF®/ANSI 61-G.

Cast straight couplings, transition couplings, reducing couplings and end cap couplings.

A versatile system of interchangeable coupling components designed to be lighter, with fewer parts, to reduce required inventories, minimize handling problems and improve installation time!

441

441Reducing

482

2

OMNIŒ Coupling System

6P LWK � % ODLU ¶ V� 2 0 1 ,Œ � & RXSOLQ JSystem utilizes the tremendous tensilestrength of ductile iron to your bestadvantage.

Applying the principles of space ageWHFK Q RORJ \ � WR� HQ J LQ HHU � WK H� 2 0 1 , SLSHcoupling has resulted in severaladvantages, including: using the properthickness and volume of gasket rubber toprovide greatly expanded rangecoverage; inaugurating the optimumangle at which a gasket should mate withthe sleeve while improving the grip on thepipe; lighter weight and fewer parts.

Within each nominal pipe size, from� ´ � WK U RXJ K � � � ´ � � WK H� Q XFOHXV� RI� WK H� 2 0 1 ,ŒCoupling System is the center sleeve. Ahost of interchangeable components(follower flanges, gaskets and end caps)within each nominal pipe size arecompatible with the center sleeve. Byselecting the proper color coded followerflanges and gaskets to exactly fit the pipeyou want to join, virtually the entire range,from the smallest to the largestdimension, will be covered for eitherstraight or transition couplings.

End caps for line testing or

permanent capping are also compatibleand interchangeable with all of the othercomponents.

,Q � DGGLWLRQ � WR� WK HVH� LQ WHU FK DQ J HDEOHcomponents, which allow you toaccommodate straight coupling, transitioncoupling, cut-in coupling and endFDSSLQ J � � WK H� 2 0 1 , & RXSOLQ J � 6 \ VWHP � DOVRhas three available reduction sleeves,which utilize all of the sameinterchangeable components forreduction couplings between adjacentQ RP LQ DO� SLSH� VL] HV� IU RP � � ´ � WK U RXJ K � � ´nominal size.

Smith-Blair® OMNIŒ Coupling System Advantages:TOUGH

Tough ductile iron sleeves, followerflanges, collars and end caps providethe tremendous tensile strength andcorrosion resistance necessary towithstand the punishment couplingsmust endure during installation andthroughout their long life.

Excluding fasteners, all ferrousmetal components have a standardQ RP LQ DO� � � � � � � P LOV� WK LFNQ HVV� RI� IXVLRQbonded epoxy coating for maximumcorrosion protection.

ECONOMICALThe economy of interchangeable

follower flanges and gaskets to fit a

single sleeve, within each nominal pipesize, allows you to reduce yourinventory and yet be able to provide fullservice for the many jobs you arerequired to perform.

2 0 1 ,� FRXSOLQ J V� DU H� TXLFN� DQ G� HDV\to install, provide for pipe misalignmentand settlement deflection, and make aleak-resistant joint which allows forlimited line movement due to expansionand contraction.

Working pressures of the couplingsare comparable to the workingpressures of the cast iron, asbestos-cement or other types of pipe on whichthey are used, and they are as

permanent as the pipeline itself.VERSATILE

7 K H� YHU VDWLOH� 2 0 1 ,Œ � & RXSOLQ JSystem enables you to do straightcoupling, transition coupling, reducingcoupling and end capping on virtuallyany type of pipe.

RESILIENT5 HVLOLHQ W� � K LJ K � YROXP H� � 1 LWU LOH

� % XQ D� 1 � � U XEEHU � J DVNHWV� SU RYLGH� D� ILU Pgrip on the pipe and a leak-resistantseal. Most importantly, they give extrarange coverage so that it takes fewergaskets to cover the entire range.Gaskets for other fluids are available onrequest.

Pressure Rating7K H� 2 P Q L� & RXSOLQ J � 6 \ VWHP � LVdesigned for a maximum pressure of� � � � 3 6 ,� � � 7 K H� DFWXDO� P D[ LP XPoperating pressure is limited by thetype and condition of the pipe,operating temperature, line contents,and installation technique. As with allproducts, consult the appropriatesafety and engineering personnelregarding installation and pipingsystem design.

This product does not restrain axial pipe orproduct movement.

See Installation Instructions.

! WARNING Try It OutSee for yourself how you can fill yourcast coupling needs with a smallselection of color coded followerflanges and gaskets on the componentselection charts on pages 12-14. Youcan buy complete couplings or selectcomponents you can interchange to fitthe types and sizes of pipe you want tojoin. They are all color coded to makeit easy for you.

Meets AWWA C-219 Certified to NSF®/ANSI 61-G n

3

441 Cast Straight & Cast Transition Couplings� ´� WKURXJ K� � � ´

Smith-Blair 441 OMNIŒ Couplings are a sensible wayto reduce your stocking requirements while increasing yourcapability to join a wide variety of types and sizes of pipe.

441 Bolted Straight and Transition Couplings fit pipe2 � ' � � VL]H V� Z LWK LQ � VSHFLILHG� U DQ J H� H[WU HP HV� � $ OO� SU DFWLFDOrange variations can be accommodated with a selection ofinterchangeable color coded follower flanges and gaskets.

Ten 441 Cast Coupling Sleeves will accommodatevirtually every pipe coupling application within the 10 mostFRP P RQ O\� XVHG� Q RP LQ DO� SLSH� VL]H V� � ´ � WK U RXJ K � � � ´ � � � 7 K HVHductile iron sleeves combined with a small inventory of colorcoded follower flanges and gaskets will permit couplingYDU LRXV� W\S HV� RI� SLSH� Z LWK � 2 � ' � � GLIIHU HQ FHV� XS� WR� � � � ´ � LQsome cases.

7\S H� � � � � & RXSOLQ J V� Z LOO� FRQ Q HFW� DQ \� WZ R� SLSHV� Z LWK LQ � WK H� 2 � ' � � U DQ J H� Z LWK RXW� FK DQ J LQ J � DQ \� SDU WV� See page 14 for end code description.Suitable anchorage must be provided when excessive pipe movement could occurs.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.

NominalPipeSize

Inches

Catalog Number End Code

(See Page 14)

O.D.**End 1Inches

O.D.**End 2 Inches

Overall Bolt& LayingLengthInches

5/8" BoltQuantityRequired

SleeveLength

Inches ‚

ApproximateShippingWeight

Lbs.

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2 4 � � � � �2 1/2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2 4 �

3

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

Material SpecificationsSLEEVE: ' XFWLOH� ,U RQ � $ 670 $ � � � � � � ( Q GV� K DYH� VPRRWK �

inside taper for uniform gasket seating.GASKETS: 1 LWU LOH� � % XQ D� 1 � � & HU WLILHG� WR� 1 6) Š � $ 1 6 ,� � � � * � �

Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydro-FDU ERQ V�DQ G� P DQ \� RWK HU � FK HP LFDOV� � 1 RP LQ DO�WHP SHU DWXU H� U DQ J H� � � � ƒ ) � WR� � � � ƒ ) � �Consult manufacturer for specific applications or other service temperatures.

FOLLOWER ' XFWLOH� ,U RQ � $ 670 � $ � � � � � � � ' HVLJ Q HG� IRU � K LJ K �FLANGES: strength/weight ratio. BOLTS High strength low alloy steel bolts with heavy,& NUTS: VHP L� ILQ LVK HG� K H[D J RQ � Q XWV�WR� $ : : $ & � � � �

� $ 1 6 ,� $ � � � � � � � VWDQ GDU GV� � � 6WDLQ OHVV�6WHHO�hardware available on request.

FINISH: ) OH[L � & RDWŠ , fusion bonded epoxy per AWWAC213. Special coatings available on request. ) ROORZ HU � IODQ J HV�DU H� FRORU � FRGHG�


g More economical than mechanical joints.

g Corrosion resistant...equal to ductile iron pipe.

g Reduces inventory. A small inventory of color coded follower flanges and gaskets allow coupling of pipesZ LWK � DQ � 2 � ' � � GLIIHU HQ FH� XS� WR� � ´ � DQ G� RYHU �

g Space savers. Bolts are close to sleeve providing easy wrapping of polyethylene or other protective materials.

g Versatile� � ) LW� YLU WXDOO\� DOO� FODVVHV�RI� FDVW� LU RQ � � DVEHVWRV�cement, and other types of pipe within specified range of each nominal size.

Features:

Follower Gasket

Sleeve

Gasket Follower

Bolts Nuts

4

7\S H� � � � � & RXSOLQ J V� Z LOO� FRQ Q HFW� DQ \� WZ R� SLSHV� Z LWK LQ � WK H� 2 � ' � � U DQ J H� Z LWK RXW� FK DQ J LQ J � DQ \� SDU WV�Suitable anchorage must be provided when excessive pipe movement could occur.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.‚ $ OVR� DYDLODEOH� Z LWK � ORQ J HU � VOHHYHV� � VHH� � � � ¶ V� RQ � SDJ H� � � �See page 14 for end code description.

NominalPipe Size

Inches

Catalog NumberEnd Code

(See Page 14)

O.D.**End 1Inches

O.D.**End 2Inches

Overall Bolt& Laying

Length Inches


SleeveLength

Inches ‚

ApproximateShipping

Weight Lbs.

4‚

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 15

� ‚

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 5 25

� ‚

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 31

10‚

� � � � � � � � � � � � � � � � 10.00 10.00 � � � � � � � � �� 11 � � � �� 10.00 � � � � � � � � �� 10.00 11 � � � �� 10.00 � � � � � � � � �� 1� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 11 � � � �� 10.00 � � � � � � � � �� 11 � � � ��


5

7\S H� � � � � & RXSOLQ J V� Z LOO� FRQ Q HFW� DQ \� WZ R� SLSHV� Z LWK LQ � WK H� 2 � ' � � U DQ J H� Z LWK RXW� FK DQ J LQ J � DQ \� SDU WV�Suitable anchorage must be provided when excessive pipe movement could occur.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.‚ $ OVR� DYDLODEOH� Z LWK � ORQ J HU � VOHHYHV� � VHH� � � � ¶ V� RQ � SDJ H� � � �See page 14 for end code description.

NominalPipe Size

Inches


(See Page 14)

O.D.**End 1Inches

O.D.** End 2Inches


Length Inches


SleeveLength

Inches ‚

ApproximateShipping

Weight Lbs.

12‚

� � � � � � � � � � � � � � � � 12.00 12.00 � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � 13.20-13.50 13.20-13.50 11 � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � 14.21-14.40 14.21-14.40 � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.00 � � � � � � � 52� � � � � � � � � � � � � � � � 13.20-13.50 12.00 � � � � � � � 52� � � � � � � � � � � � � � � � 13.20-13.50 � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.00 � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � 13.20-13.50 � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.00 � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � 13.20-13.50 � � � � � � � 52� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � 14.21-14.40 12.00 � � � � � � � 52� � � � � � � � � � � � � � � � 14.21-14.40 � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � 14.21-14.40 13.20-13.50 � � � � � � � 52� � � � � � � � � � � � � � � � 14.21-14.40 � � � � � � � � � � � � � � � � � � 52� � � � � � � � � � � � � � � � 14.21-14.40 � � � � � � � � � � � � � � � � � � 52

14‚

� � � � � � � � � � � � � � � � 15.30-15.50 15.30-15.50 � � � � � � � � �� 15.30-15.50 � � � � � � � � �� 15.30-15.50 � � � � � � � � �� 15.30-15.50 � � � � � � � � �� 15.30-15.50 � � � � � � � � ��

� � ‚

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10 � � �� 10 � � �� 10 � � �� 10 � � �� 10 � � �� 10 � � �




!WARNINGTry It Out

See for yourself how you can fill your cast coupling needswith a small selection of color coded follower flanges andgaskets on the component selection charts on pages 12-14. You can buy complete couplings or select componentsyou can interchange to fit the types and sizes of pipe youwant to join. They are all color coded to make it easy foryou.

�

442 Long Sleeve Cast Straight & Transition Couplings� ´� WKURXJ K� � � ´

6P LWK � % ODLU � � � � � 2 0 1 ,Œ� & RXSOLQ J V� DU H� D� VHQ VLEOH� Z D\to reduce your stocking requirements while increasing yourcapability to join a wide variety of types and sizes of pipe.

442 Bolted Long Sleeve Straight and Transition& RXSOLQ J V� ILW� SLSH� 2 � ' � � VL] HV� Z LWK LQ � VSHFLILHG� U DQ J Hextremes. All practical range variations can beaccommodated with an easy selection of interchangeablecolor coded follower flanges and gaskets .

442 Cast Coupling Sleeves will accommodate virtuallyevery pipe coupling application within the most commonlyXVHG� Q RP LQ DO� SLSH� VL]H V� � ´ � WK U RXJ K � � � ´ � � � 7 K HVH� ' XFWLOH� ,U RQsleeves combined with a small inventory of color codedfollower flanges and gaskets will permit coupling variousW\S HV� RI� SLSH� Z LWK � 2 � ' � � GLIIHU HQ FHV�XS� WR� � � � ´ � LQ � VRP H� FDVHV�


inside taper for uniform gasket seating.GASKETS: 1 LWU LOH� � % XQ D� 1 � � & HU WLILHG� WR� 1 6) Š � $ 1 6 ,� � � � * �

Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalies, most (aliphatic) hydro-carbons and many other chemicals. 1 RP LQ DO� WHP SHU DWXU H� U DQ J H� � � � ƒ ) � WR� � � � ƒ ) � � �Consult manufacturer for specific applications or other service temperatures.

FOLLOWER ' XFWLOH� ,U RQ � $ 670 � $ � � � � � � � ' HVLJ Q HG� IRU � K LJ K �FLANGES: strength/weight ratio. Thickness determined by

coupling size.BOLTS High strength low alloy steel bolts with heavy,& NUTS: VHP L� ILQ LVK HG� K H[D J RQ � Q XWV�WR� $ : : $ & � � � �




T\S H� � � � � & RXSOLQ J V� Z LOO� FRQ Q HFW� DQ \� WZ R� SLSHV� Z LWK LQ � WK H� 2 � ' � � U DQ J H� Z LWK RXW� FK DQ J LQ J � DQ \� Sarts.Suitable anchorage must be provided when excessive pipe movement could occur.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.See page 14 for end code description.

NominalPipe Size

Inches


(See Page 14)

O.D.**End 1Inches

O.D.**End 2Inches

SleeveLengthInches



Length Inches

ApproximateShipping

Weight Lbs.

4

442-00000415- 4.00-4.15 4.00-4.15

�

12

4

4

11

15 1/2

21.4

34.0

442-00000450- 4.22-4.50 4.22-4.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 442-00000545- 5.11-5.45 5.11-5.45442-04500415- 4.22-4.50 4.00-4.15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 442-05450415- 5.11-5.45 4.00-4.15442-05450450- 5.11-5.45 4.22-4.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

g More economical than mechanical joints.

g Corrosion resistant...equal to ductile iron pipe.

g Reduces inventory. A small inventory of color coded follower flanges and gaskets allow coupling of pipesZ LWK � DQ � 2 � ' � � GLIIHU HQ FH� XS� WR� � ´ � DQ G� RYHU �

g Space savers. Bolts are close to sleeve providing easy wrapping of polyethylene or other protective materials.

g Versatile� � ) LW� YLU WXDOO\� DOO� FODVVHV�RI� FDVW� LU RQ � � DVEHVWRV�cement, and other types of pipe within specified range of each nominal size.

Features:

Follower Gasket

Sleeve

Gasket Follower

Bolts Nuts

�

T\S H� � � � � & RXSOLQ J V� Z LOO� FRQ Q HFW� DQ \� WZ R� SLSHV� Z LWK LQ � WK H� 2 � ' � � U DQ J H� Z LWK RXW� FK DQ J LQ J � DQ \� Sarts.Suitable anchorage must be provided when excessive pipe movement could occur.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.See page 14 for end code description.

NominalPipe Size

Inches


(See Page 14)

O.D.**End 1Inches

O.D.**End 2Inches

SleeveLengthInches



Length Inches

ApproximateShipping

Weight Lbs.

�

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � �

12

4

4

11

15 1/2

30.3

� � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

�

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� �

12

�

�

11

15 1/2

� � � �

� � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

10

442-00001000-400 10.00 10.00

� � � � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

12

442-00001200-400 12.00 12.00

12 � 15 1/2 � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �442-00001350-400 13.20-13.50 13.20-13.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �442-00001420-400 � � � � � � � � � � � � � � � � � � � � � �442-00001440-400 14.21-14.40 14.21-14.40� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.00442-13501200-400 13.20-13.50 12.00� � � � � � � � � � � � � � � � 13.20-13.50 � � � � � � � � � � � � � � � �� 12.00� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 13.20-13.50


�

T\S H� � � � � & RXSOLQ J V� Z LOO� FRQ Q HFW� DQ \� WZ R� SLSHV� Z LWK LQ � WK H� 2 � ' � � U DQ J H� Z LWK RXW� FK DQ J LQ J � DQ \� SDU WV�Suitable anchorage must be provided when excessive pipe movement could occur.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.See page 14 for end code description.

NominalPipe Size

Inches


(See Page 14)

O.D.**End 1Inches

O.D.**End 2Inches

SleeveLengthInches



Length Inches

ApproximateShipping

Weight Lbs.

12

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

12 � 15 1/2 � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 442-14401200-400 14.21-14.40 12.00� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �442-14401350-400 14.21-14.40 13.20-13.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

14

442-00001550-400 15.30-15.50 15.30-15.50

12 � 15 1/2 105.0

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 15.30-15.50� � � � � � � � � � � � � � � � � � � � � � � � � � � 15.30-15.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 15.30-15.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 15.30-15.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

� �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��



!WARNINGTry It Out



�

441 Cast Reducing Couplings� ´� WKURXJ K� � ´

Smith-Blair 441 Reducing Couplings are used toconnect pipes with a difference in outside diameters ofDSSU R[L P DWHO\� � � � � � ´ � WR� � � � � � ´ � � 7 K H� U HGXFLQ J � VOHHYH� XWLOL]H V�DOOof the color coded gaskets and follower flanges within anyJ LYHQ � Q RP LQ DO� SLSH� VL]H � RI� WK H� 2 0 1 ,Œ� & RXSOLQ J � 6 \VWHP � � � ) RUsizes not listed, consult listings on the 415 Steel ReducingCoupling.

HOW TO ORDER7K H� ODU J H� SLSH� 2 � ' � � DQ G� VPDOO� SLSH� 2 � ' � � U HTXHVWHG� WR

FRXSOH� P XVW� IDOO� Z LWK LQ � WK H� 2 � ' � � U DQ J HV�OLVWHG� RQ � WK H� VDP H� OLQ H�,I� WK H� SLSHV� GR� Q RW� FRP H� Z LWK LQ � WK H� U DQ J HV� OLVWHG� � SOHDVHconsult listings on 413 and 415 couplings.

The ordering description for 441 Reducing CouplingFRQ VLVWV�RI� ³ � � � ´ � IROORZ HG� E\� WK H� ³ ( [D FW� RXWVLGH� GLDP HWHU V�RIthe two pipes to be connected.

EXAMPLE: 7R� FRXSOH� DQ � � ´ � $ VEHVWRV� & HP HQ W� SLSH� Z LWKD� � � � � ´ � 2 � ' � � WR� D� & DVW� ,U RQ � SLSH� Z LWK � D� � � � � ´ � 2 � ' � � WK H� RU GHU LQ JGHVFU LSWLRQ � Z RXOG� EH� � � � � � � � � � ´ � � � � � � � ´ �

Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the coupling.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.See page 14 for end code description.

NominalSize Inches Catalog Number

End Code(See Page 14)

O.D.**End 1Inches

O.D.**End 2Inches

LayingLengthInches

5/8" Bolts ApproximateShippingWeight

Lbs.End 1 End 2 LengthInches

QuantityRequired

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� 4

� � � � � � � � � � � � � � � � � � � � � � � � � 4.00-4.15

5 4 1/2 � 25

� � � � � � � � � � � � � � � � � � � � � � � � � 4.22-4.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 5.11-5.45� � � � � � � � � � � � � � � � � � � � � � � � � 4.00-4.15� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.22-4.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 5.11-5.45� � � � � � � � � � � � � � � � � � � � � � � � � 4.00-4.15� � � � � � � � � � � � � � � � � � � � � � � � � 4.22-4.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 5.11-5.45� � � � � � � � � � � � � � � � � � � � � � � � � 4.00-4.15� � � � � � � � � � � � � � � � � � � � � � � � � 4.22-4.50� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 5.11-5.45





coupling size.BOLTS High strength low alloy steel bolts with heavy,& NUTS: VHP L� ILQ LVK HG� K H[D J RQ � Q XWV�WR� $ : : $ & � � � �




Follower

GasketSleeve

Bolts

Nuts

Follower

Gasket

Nuts

Smith-Blair 482 End Cap Test Couplings combine the441 Cast Coupling parts with a special ductile iron blind endflange for testing the line or capping it permanently.

$ � ´ � 1 37 WK U HDGHG� RXWOHW� LQ � � ´ � � � � � � � ´ � � RU � � ´ � HQ G� FDSV�DQ G� D� ´ � 1 37 WK U HDGHG� RXWOHW� LQ � � ´ � WK U RXJ K � � � ´ � HQ G� FDSV� LVconveniently located to allow for blow-off or line draining.

10

NominalSize Inches Catalog Number

End Code(See Page 14)

O.D.**End 1Inches

O.D.**End 2Inches

LayingLengthInches

5/8" Bolts ApproximateShippingWeight

Lbs.End 1 End 2 LengthInches

QuantityRequired

� �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

5 4 1/2 10 35

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

441 Cast Reducing Couplings� ´� WKURXJ K� � ´

Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the coupling.**Published ranges indicate nominal pipe outside diameters. Couplings are designed for pipes within current AWWA Standard tolerances.See page 14 for end code description.





coupling size. BOLTS High strength low alloy steel bolts with heavy,& NUTS: VHP L� ILQ LVK HG� K H[D J RQ � Q XWV�WR� $ : : $ & � � � �

� $ 1 6 ,� $ � � � � 1) standards. Stainless Steel hardware available on request.



482 Cast End Cap Couplings� ´� WKURXJ K� � � ´

Follower Gasket

Sleeve Gasket

Follower

Bolts Nuts

Outlet

11

482 Cast End Cap Couplings� ´� WKURXJ K� � � ´

1 2 7( � � 7 K U XVW� EORFNV�DU H� DOZ D\V� U HTXLU HG� Z K HQ � WK H� OLQ H� LV�WHVWHG� RU � SODFHG� LQ � XVH� � � ) RU � VL]H V� Q RW� OLVWHG� DVN�DERXW� 7\S H� � � � � 6WHHO� 3LSH� ( Q G� & DSV�‚ ‚ 3XEOLVK HG� U DQ J HV� LQ GLFDWH� Q RP LQ DO� SLSH� RXWVLGH� GLDP HWHU V� � � & RXSOLQ J V�DU H� GHVLJ Q HG� IRU � SLSHV� Z LWK LQ � FXU U HQ W� $ : : $ 6WDQ GDU G� WROHU DQ FHV�‚ $ OVR� DYDLODEOH� Z LWK � ORQ J HU � VOHHYHV� � VHH� � � � ¶ V� RQ � SDJ H� � � � � � 6HH� SDJ H� � � � IRU � HQ G� FRGH� GHVFULSWLRQ �

Nominal Pipe Size

Inches


(See Page 14)

5 DQJ H� ‚ ‚Inches

Overall Bolt &Laying Length

Inches


SleeveLength

,QFKHV ‚

ApproximateShipping

Weight - Lbs.� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

2 1/2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2 4 10

3� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

4� � � � � � � � � � � � � � � � 4.22-4.50 � � � � � 4 5 � �� 4 5 � �� 4 5 � �� 5.11-5.45 � � � � � 4 5 � �

��

�� 5 � �� 5 � �� 5 � �� 5 � �

10

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

12

� � � � � � � � � � � � � � � � 12.00 � � � � � � � � �� 13.20-13.50 � � � � � � � � �� 14.21-14.40 � � � � � � � � �



!WARNINGTry It Out


OMNI Coupling SystemComponent Selection Chart

12

NominalPipeSize

(Inches)

5 DQJ H� ‚ ‚(Inches)

Gasket/FlangeColorCode

Gasket FollowerFlange

Fits Pipes of these Nominal O. D.'s (Inches)

CopperTubeSize

(CTS)

O.D.Steel

Schedule40/80Std.

Steel andIPS PVC

CentrifugalCast Iron

AWWAC-900 PVCC950 FRP

AWWAPit Cast

Iron

Asbestos Cement Pipe

Class 100 Class 150 Class 200

ME RB ME RB ME RB� � � � � � � � � � % OXH � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � � � � 5 HG � � � � � � � � � � � � � �

3

� � � � � � � � � 5 HG � � � � � � � � � � 3.13

� � � � � � � � � 5 HG � � � � � � � � � � 3.50

� � � � � � � � � % OXH � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � % OXH � � � � � � � � � � 4.13

4

4.00-4.15 5 HG � � � � � � � � � � 4.13 4.00

4.22-4.50 5 HG � � � � � � � � � � 4.50

� � � � � � � � � 5 HG � � � � � � � � � � � � � � � � � �

� � � � � � � � � % OXH � � � � � � � � � � � � � � 5.00 5.05 � � � � � � � � � � � �

5.11-5.45 % OXH � � � � � � � � � � 5.25 5.32 5.33

�

� � � � � � � � � 5 HG � � � � � � � � � � � � � � � � � �

� � � � � � � � � 5 HG � � � � � � � � � � � � � �

� � � � � � � � � 5 HG � � � � � � � � � � � � � � � � � �

� � � � � � � � � % OXH � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � � � �

�

� � � � � � � � � 5 HG � � � � � � � � � � � � � � � � � �

� � � � � � � � � 5 HG � � � � � � � � � � � � � � � � � �

� � � � � � � � � 5 HG � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � % OXH � � � � � � � � � � � � � �

� � � � � � � � � % OXH � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � * U D\ � � � � � � � � � �

10

10.00 5 HG � � � � � � � � � � 10.00

� � � � � � � � � � � 5 HG � � � � � � � � � � � � � � �

� � � � � � � � � � � % OXH � � � � � � � � � � 11.10 � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � 12.12 12.12

12

12.00 5 HG � � � � � � � � � � 12.00

� � � � � � � � � � � 5 HG � � � � � � � � � � � � � � �

13.20-13.50 % OXH � � � � � � � � � � 13.20 13.50 13.44

� � � � � � � � � � � % OXH � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � 14.00 14.00 14.04 � � � � � � � � � � � � � � � � � � � �

14.21-14.40 * U D\ � � � � � � � � � � � � � � � � � � � �

14

15.30-15.50 % OXH � � � � � � � � � � 15.30 15.50

� � � � � � � � � � � % OXH � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � �

� �

� � � � � � � � � � � % OXH � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � � � � * U D\ � � � � � � � � � � � � � � � � � � � �‚ ‚ � 3XEOLVK HG� U DQ J HV� LQ GLFDWH� Q RP LQ DO� SLSH� RXWVLGH� GLDP HWHU V� � � & RXSOLQ J V� DU H� GHVLJ Q HG� IRU � SLSHV� Z LWK LQ � FXU U HQ W� $ : : $ 6WDQ GDU G� WROHU DQ FHV�

13

‚ ‚ 3XEOLVK HG� U DQ J HV� LQ GLFDWH� Q RP LQ DO� SLSH� RXWVLGH� GLDP HWHU V� � � & RXSOLQ J V� DU H� GHVLJ Q HG� IRU � SLSHV� Z LWK LQ � FXU U HQ W� $ : : $ 6WDQ GDU G� WROHU DQ FHV�¤This component requires the largest gasket within its nominal pipe size for proper fit. †� ) LQ LVK � FRGHV� IRU � Q XWV�DQ G� EROWV�DU H� � � � � � $ OOR\ � � � � � � 6WDLQ OHVV�6WHHO� � � � � � ( OHFWU R� * DOY� 3OHDVH� U HIHU HQ FH� WK H� ³ 5 $ 1 * ( ´ � FROXP Q � WR� VHOHFW� DSSU RSU LDWH� FRP SRQ HQ W�When ordering bolts for shaded coupling range, use shaded bolt code.

OMNI Coupling SystemComponent Selection Chart

Nom.Size (In.)

‚ ‚O.D.

RangeInches

Gasket(Requires 2)

Follower Flange

Flexi-Coat Epoxy

¤Cap

Flexi-CoatEpoxy

Sleeve Flexi-Coat

Epoxy

§441/R441 Bolts & Nuts

(# Required)Bolt/Nut

§442 Bolts & Nuts


§482 Bolts & Nuts


2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� [ � � - � � � � � � � � � � � � � � � � � � �

� � � � [� �2 1/2 x 2

ReducingCoupling * * - 55142-045 � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � - -

2 1/2 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 55141-045 � � � � � � � � � � � � � � � � � � � � �� [ � � - � � � � � � � � � � � � � � � � � � �

� � � � [� �

3� � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � �55144-045

� � � � � � � � � � � � � � � � � � � � �� [ � � - � � � � � � � � � � � � � � � � � � �

� � � [�� 55144-045� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 55144-045� � � � � � � � � � � � � � � � � � � � � � � � � � � 55144-045

4

4.00-4.15 � � � � � � � � � � � � � � � � � �

21354-045

55131-045� � � � � � � � � � � � � � � � � � � � �

� � � � [ � �

� � � � � � � � � � � � � � � � � � � �� [ � � � � � � �

� � � � � � � � � � � � � � � � � � �� [ � � �

� � � � � � � � � � � � � � � � � � �� [�

4.22-4.50 � � � � � � � � � � � � � � � � � � 55131-045� � � � � � � � � � � � � � � � � � � � � � � � � � � 55131-045� � � � � � � � � � � � � � � � � � 21353-045 55131-0455.11-5.45 � � � � � � � � � 21353-045 55131-045

� [ � ReducingCoupling * * - 55133-045 � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � � � � � - -

�

� � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � �

� � � � � � � � ��

� � � � [ � �

� � � � � � � � / (4)100025� � � � [ � � � � � � �

� � � � � � � � � � � � � � � � � � � � �� [ � � �

� � � � � � � � � � � � � � � � � � �� [ �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

� [ � ReducingCoupling * * - � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � � � � � - -

�

� � � � � � � � � � � � � � � � � � � � � � � � � � �

21345-045

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� [ � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � � � � � ��

� � � � [ � � �

� � � � � � � � � � � � � � � � � � �� [ �

� � � � � .. � � � � � � � � � � � � � � � � � � � � � � � � � � ��

� � � � � � � � � � � � � � � � � � � � � � � �� [ � �

� � � � � � � � � � � � � � � � � � 21350-045 � � � � � � � � �� 21350-045 � � � � � � � � �� 21351-045 � � � � � � � � �

10

10.00 � � � � � � � � � 21355-045

� � � � � � � � �

55134-045 � � � � � � � � � � � � � � � � � � � � �� [ � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � ��

� � � [ �

� � � � � � � � � � � � � � � � � � � � 21355-045 55134-045� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 55134-045 � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � � � � � �� 55134-045� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 55134-045

12

� � � � � � � � � � � � � � � � � � � � � � �

� � � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� [ � �

� � � � � � � � � � � � � � � � � � �� [ � � �

� � � � � � � � � � � � � � � � � � �� [ �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

� � � � � � � � � � � � � � � � � � � � �� [ � � � � � � �

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

14

15.30-15.50 � � � � � � � � � � � � � � � � � �

-

� � � � � � � � ��

� � � � [ � ��

� � � � [ � � � -� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ��

� ��

-� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � [ � � � � � � �� / (10)100025

� � � � [ � � ��

� � � � [ � � �

-� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

� � � � [ � ��

14

Sleeve Length OptionsSleeve Part Number For Use On 441, 442, & 482 Products

NominalSize

Sleeve Length(Inches)

PartNumber

SleeveColorCode

45 55131-045 Blue� � � � � � � � � � % OXH� � � � � � � � � � � % OXH

�5 � � � � � � � � � Blue� � � � � � � � � � Blue

12 � � � � � � � � � Blue

�5 � � � � � � � � � Blue� � � � � � � � � � % OXH12 � � � � � � � � � Blue

10� 55134-045 Blue

12 � � � � � � � � � Blue

12� � � � � � � � � � Blue� � � � � � � � � � � Blue

14� � � � � � � � � � Blue

12 � � � � � � � � � Blue

� �� % OXH12 � � � � � � � � � Blue

End Codes for Coupling Sleeve, Coating and HardwareEnd Code Description

441 and 482� � � � 6WDQ GDU G� 6OHHYH� � ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � $ OOR\� % ROWV�DQ G� 1 XWV� � � � 6WDQ GDU G� 6OHHYH� � ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � � � � � 6WDLQ OHVV�6WHHO� % ROWV�DQ G� 1 XWV� � � � 6WDQ GDU G� 6OHHYH� � ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � � � � � 6WDLQ OHVV�6WHHO� % ROWV�DQ G� 1 XWV

442 Only� � � � � ´ � / RQ J � 6OHHYH� ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ , Alloy BoltV�DQ G� 1 XWV-231 � ´ � / RQ J � 6OHHYH� ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � � � � � 6WDLQ OHVV�6WHHO� % ROWV�DQ G� 1 XWV-243 � ´ � / RQ J � 6OHHYH� ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � � � � � 6WDLQ OHVV�6WHHO� % ROWV�DQ G� 1 XWV-400 12´ � / RQ J � 6OHHYH� ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � $ OOR\� % ROWV�DQ G� 1 XWV-431 � � ´ � / RQ J � 6OHHYH� ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � � � � � 6WDLQ OHVV�6WHHO� % ROWV�DQ G� 1 XWV-443 � � ´ � / RQ J � 6OHHYH� ) OH[L � & RDWŠ � � ) XVLRQ � % RQ GHG� ( SR[\ � � � � � � 6WDLQ OHVV�6WHHO� % ROWV�DQ G� 1 XWV

15

Pipe Outside Diameter Guide

Nominal Pipe Size (Inches) 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 15 16 18 20 24 30& RSSHU � 7XELQ J � � & � 7� 6 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6WHHO� 3LSH� � � � 6FK HGXOH� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3ODVWLF� 3LSH� � � � � 3� 9� & � � � � � � 67' � 1.32 � � � � � � � � � � � � 3.50 4.50 � � � � � � � � � � � � � � � � � �3ODVWLF� 3LSH� � � � � 3� 9� & � � � � � � & � ,� � 6L]H � � � � � � � � � � � � 11.10 13.20PVC Sewer Pipe � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3RO\H WK \OHQ H� 3LSH� ,� 3� 6 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3RO\H WK \OHQ H� 3LSH� ' � ,� � 6L]H � � � � � � � � � � � � 11.10 13.20 15.30 � � � � � � � � � � � � � � � � � � � �3ODVWLF� ,U U LJ DWLRQ � 3LSH� � 3 ,3 � 4.13 � � � � � � � � 10.20 12.24 15.30 � � � � � � � � � �

Nominal Pipe Size (Inches) 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 15 16 18 20 24 30& ODVV� � � � � � � � � $ : : $ & HQ WU LIXJ DOO\ � & DVW � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �& ODVV�$ $ : : $ 3LW� & DVW � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Class B AWWA Pit Cast � � � � 5.00 � � � � � � � � 11.10 13.20 15.30 � � � � � � � � � � � � � � � � � � � � 32.00Class C AWWA Pit Cast � � � � 5.00 � � � � � � � � 11.40 13.50 � � � � � � � � � � � � � � � � � � � � � � � � � 32.40& ODVV�' � $ : : $ 3LW� & DVW � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Soil Pipe � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

Nominal Pipe Size (Inches) 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 15 16 18 20 24 300 DFK LQ HG� ( Q G � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �) OXLG� 7LWH� 5 RXJ K � % DU U HO � � � � 5.05 � � � � � � � � � � � � � � � � � � � � � � � � � � � �) OLQ WLWH� 5 RXJ K � % DU U HO � � � � � � � � � � � � � � � � 11.30 13.42 15.45 � � � � �Ring-Tite Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Permaflex Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Minimum Standard Rough Barrel � � � � � � � � � � � � 11.25 � � � � � � � � � � � � � � � 20.44 22.50 � � � � �Maximum Standard Rough Barrel � � � � � � � � � � � � � � � � � 14.04 � � � � � � � � � �

Nominal Pipe Size (Inches) 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 15 16 18 20 24 300 DFK LQ HG� ( Q G � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �) OXLG� 7LWH� 5 RXJ K � % DU U HO � � � � 5.32 � � � � � � � � � � � � � 14.11 � � � � � � � � � �) OLQ WLWH� 5 RXJ K � % DU U HO � � � � 5.32 � � � � � � � � � � � � � 14.14 � � � � � � � � � �Ring-Tite Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Permaflex Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Minimum Standard Rough Barrel 5.22 � � � � � � � � � � � � � 14.03 � � � � � � � � � �Maximum Standard Rough Barrel � � � � � � � � � � � � 12.12 � � � � � � � � � � � � � � �

Nominal Pipe Size (Inches) 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 15 16 18 20 24 300 DFK LQ HG� ( Q G � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �) OXLG� 7LWH� 5 RXJ K � % DU U HO 4.03 5.14 � � � � � � � � � � � � � 14.11 � � � � � � � � � �) OLQ WLWH� 5 RXJ K � % DU U HO 4.04 5.01 � � � � � � � � � � � � � 14.14 � � � � � � � � � �Ring-Tite Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Permaflex Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �Minimum Standard Rough Barrel � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21.20 23.54 � � � � �Maximum Standard Rough Barrel 5.32 � � � � � � � � 12.12 � � � � � � � � � � � � � � �

*P.E. Tubing can be C.T.S.

Cast Iron Pipe

Asbestos-Cement Pipe Class 100



IMPORTANT:g 7K LV� 3LSH� 2 � ' � � * XLGH� LV� IXU Q LVK HG� IRU � \R XU � FRQ YHQ LHQ FH� DQ G� LV�EDVHG� RQ � WK H� ODWHVW� SLSH� VWDQ GDU GV�DQ G� LQ IRU P DWLRQ � VXSSOLHG� E\� SLSH� P DQ XIDFWXU HU V� � �

' XH� WR� RFFDVLRQ DO� FK DQ J HV� LQ � RXWVLGH� GLDP HWHU V�E\� SLSH� P DQ XIDFWXU HV� � WK H� SLSH� 2 � ' � � RU � FLU FXP IHU HQ FH� VK RXOG� DOZ D\V� EH� FK HFNHG� DQ G� IXU Q LVK HGwhen ordering fittings.

g Cetrain types of pipe may require special preparation prior to installation of products. Please contact the engineers at Smith-Blair concerning any application questions.

g 3OHDVH� U HIHU � WR� WK H� P DQ XIDFWXU HU V�GDWD� VXSSOLHG� DW� WLP H� RI� SLSH� LQ VWDOODWLRQ � � RU � P HDVXU H� WK H� SLSH� 2 � ' � � RU � FLU FXP IU HQ FH� � SU LRU � WR� RU GHU LQ J � ILWWLQ J V�

) OLQ WLWH� 0 � ( � � LV� � � � � � � IRU � � � ´ � DQ G� � � � � � � IRU � � � ´ � VL]H V�

� � ARG/2500/0211

Although Smith-BlairŠ has employed every effort to presentaccurate information, the technical performance data, installationrecommendations and specifications in this catalog are presentedmerely as a guide. Each application must be evaluated relative toLWV�RZ Q � ³ VSHFLDO� FRQ GLWLRQ V´ � DQ G� VK RXOG� EH� U HYLHZ HG� E\� D� TXDOLILHGengineer to verify that the stated pressures, temperatures, andother performance data are applicable.

Anyone making use of this information assumes all liabilitiesfrom such use. Changes to the design or misapplications ofSmith-BlairŠ products without its consent or approval are strictlyprohibited. Smith-BlairŠ assumes no risk or liability of its productswhich are altered by the customer or used in a manner other thanthose described in the applications literature.

WARRANTY: Smith-BlairŠ warrants its products only against defects in

materials and workmanship. Smith-BlairŠ ¶ s liability andFXVWRP HU ¶ V�H[FOXVLYH� U HP HG\� XQ GHU � WK LV� Z DU U DQ W\� RU � DQ \� Z DU U DQ W\extends for a perioud of one (1) year from the date of Smith-BlairŠ ¶ V� VK LSP HQ W� DQ G� LV� H[S U HVVO\� OLP LWHG� WR� U HSD\P HQ W� RI� WK Hpurchase price, repair, or replacement, at Smith-BlairŠ ¶ V� RSWLRQ �during said period, upon proof satisfactory to Smith-BlairŠ andXSRQ � FXVWRP HU ¶ V� U HWXU Q LQ J � DQ G� SU HSD\L Q J � DOO� FK DU J HV� RQ � VXFKproducts to factory or warehouse designated by Smith-BlairŠ .

This warranty is made expressly in lieu of all otherwarranties, expressed, implied or statutory, with respect toquality, merchantability or fitness for a particular purpose.


7H[D U NDQ D� � $ 5 � � � � � �3� 2 � � % R[� � � � �

TH[D U NDQ D� � 7; � � � � � �

Inside Sales:3 K � � � � � � � � � � � � � � � � � � ‡ � � � � � � � � � � � � � � � �) D[� � � � � � � � � � � � � � � � � ‡ � � � � � � � � � � � � � � �

www.smith-blair.com

' LVWU LEXWHG� % \�

Warranty Information

Patent 6,168,210 B1

Quantum® CouplingWide-Range

The Smith-Blair Quantum®

Coupling accommodates up to 1.65-inches of Pipe O.D. differential with asingle flange and gasket.

The Quantum’s tough ductile ironsleeve and follower flanges providethe tensile strength and corrosionresistance that is necessary forcouplings to withstand thepunishment they must endure duringinstallation and throughout their longlives.

The coupling’s 5/8” bolts arequick and easy to install because nodisassembly is required.

The Quantum also provides formisalignment and settlementdeflection (3° per end) and makes aleak-resistant joint that allows forlimited line movement due toexpansion and contraction.

The Quantum coupling comesstandard with fusion bonded NSF 61approved epoxy coating. Smith-

Blair’s Flexi-Coat® epoxy systemmaintains superior flexibility as theproduct is installed on the pipe.Additionally, this durable epoxycoating provides superior corrosionprotection over a wide temperaturerange and can be shipped withminimal damage.

With a 250 PSI working pressureand all cast ductile parts, theQuantum® is the proven answer forWIDE rangeability couplings.

Clamp and Coupling Products CC-460 03/11

! WARNINGTHESE PRODUCTS

DO NOTRESTRAIN AXIAL

PIPE OR PRODUCTMOVEMENT

Material SpecificationsSleeve: High Strength Ductile Iron ASTM A536Flanges: High Strength Ductile Iron ASTM A536Gasket: Nitrile (Buna-N) NSF 61 approvedCoating: Fusion Bonded Flexi-Coat® Epoxy per AWWA

C213Bolts: HSLA steel per ANSI A21.11 (AWWA C111) with

Flexi-Coat epoxy finish. Stainless Steel optional.Nuts: Heavy Hex HSLA steel per ANSI A21.11 with

Fluoropolymer Coating (to prevent galling).Material specifications subject to change.

WARRANTY:Smith-Blair warrants its products only against defects in materials and workmanship. Smith-Blair’s liability and customer’s exclusiveremedy under this warranty, or any warranty, extends for a period of one (1) year from the date of Smith-Blair’s shipment and is express-ly limited to repayment of the purchase price, repair, or replacement, at Smith-Blair’s option, during said period, upon proof satisfacto-ry to Smith-Blair and upon customer’s returning and prepaying all charges on such products to factory or warehouse designated bySmith-Blair. THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTO-RY, WITH RESPECT TO QUALITY, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE.

Nom.Size (in.)

O.D.Range (in.)

With Epoxy CoatedAlloy Bolts & Nuts


SleeveLength

(in.)

5/8" BoltQuantity

LayingLength

(in.)

Wt.(lbs.)

Catalog Number Catalog Number

1 1/2 1.81 - 2.28 461-01810228-000 461-01810228-031 4 2 10.5 8.2

2 2.34 - 2.85 461-02340285-000 461-02340285-031 4 2 10.5 10

2 1/2 2.84 - 3.35 461-02840335-000 461-02840335-031 4 2 10.5 10

3 3.46 - 4.21 461-03460421-000 461-03460421-031 5 4 10.5 15

4 4.46 - 5.60 461-04460560-000 461-04460560-031 5.5 4 10.5 26

6 6.54 - 7.65 461-06540765-000 461-06540765-031 6 4 10.5 33

8 8.54 - 9.85 461-08540985-000 461-08540985-031 6 4 10.5 44

10 10.65 - 12.20 461-10651220-000 461-10651220-031 7.5 8 13.5 72

12 12.75 - 14.40 461-12751440-000 461-12751440-031 7.5 8 13.5 89

Nom.Size (in.)

O.D.Range (in.)

With Epoxy CoatedAlloy Bolts & Nuts


SleeveLength

(in.)

5/8" BoltQuantity

LayingLength

(in.)

Wt.(lbs.)

Catalog Number Catalog Number

4 4.46 - 5.60 462-04460560-000 462-04460560-031 12 4 17 31.4

6 6.54 - 7.65 462-06540765-000 462-06540765-031 12 4 17 42.3

8 8.54 - 9.85 462-08540985-000 462-08540985-031 12 4 17 55.3

10 10.65 - 12.20 462-10651220-000 462-10651220-031 12 8 17 73.0

12 12.75 - 14.40 462-12751440-000 462-12751440-031 12 8 17 87.0

SWP/5000/0311

Physical AddressSmith-Blair, Inc.


Mailing AddressSmith-Blair, Inc.


Inside Sales:Ph: (800) 643-9705 • (870) 773-5127Fax: (800) 648-6792 • (870) 773-5212

Website: www.smith-blair.com

461 Standard Coupling Meets AWWA C219 Standards

462 12” Long Sleeve CouplingMeets AWWA C219 Standards

Clamp and Coupling Products CC 525 03/10

Compression Couplings525

and Adapter Gaskets

The Smith-Blair 525 Compression Coupling isdesigned to fit nominal pipe sized half-inch thru two-inch.

The coupling is designed to join plain end smalldiameter pipe on new installations and pipemodifications. It can also be used to maintain andrepair existing pipe systems. The CompressionCoupling has a temperature range of -20°F to 180°Fand a working pressure up to 150 PSI.

It has Nitrile (Buna N) gaskets and a galvanizedfinish. The 525 compression coupling is designed tofit on steel, copper* and PVC** pipe.*Copper pipe requires an adapter gasket.**Wall thickness rating must be provided before ordering for proper selectionand proper application.

Adapter Gasket

copper tubing steel pipe

! WARNINGTHESE PRODUCTS

DO NOTRESTRAIN AXIALPIPE MOVEMENT

Material SpecificationsSleeve: Ductile IronGasket: Nitrile (Buna N) - compounded to resist oil,

acids, alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. (Contact Smith-Blair engineers for applications involving other chemicals).

Temperature Range: -20°F. to 180°F.Compression Nut: Ductile IronFinish: Galvanized

*Product not recommended for natural gas service.Material specifications subject to change.

Smith-Blair’s Adapter Gasket is used toadapt steel size couplings to copper tubing.

The gasket insulates the copper tubing fromthe coupling and from other pipe being joinedtogether.

The adapter gasket is suitable for use withboth the Smith-Blair Compression Coupling andthe Smith-Blair 411 Steel Bolted Coupling.

Adapter Gasket Diagram

Acontinuous brass helix molded into the leadingedge of the gasket provides metal to metalcontact between the pipe and coupling sleeve.Extra protection is given against line contentsand the coupling is electrically bonded to thepipe.

525 Compression Coupling

Gasket

U.S.

Catalog Number

MetricNom.

Pipe SizeInches

Steel Pipe O.D.

Inches

CopperTubing O.D.

Inches

Nom.Pipe Size

mm

Steel Pipe O.D.

mm

CopperTubing O.D.

mm1/2 0.84 0.63 000-00038420-069 15 21.34 16.003/4 1.05 0.88 000-00038421-069 20 26.67 22.351 1.32 1.13 000-00038422-069 25 33.40 28.70

1 1/4 1.66 1.38 000-00038423-069 32 42.16 35.051 1/2 1.90 1.63 000-00038424-069 40 48.26 41.40

2 2.38 2.13 000-00038425-069 50 60.33 54.10

SWP/5000/0310

U.S.

Catalog NumberGalvanized

Qty. PerCarton

Metric

Nom.Pipe Size

Inches

PipeO.D.

Range

Wt.Ea.Lbs.

Ctn.Wt.Lbs.

Nom.Pipe Size

mm

PipeO.D.mm

Wt.Ea.Kg.

Ctn.Wt.Kg.

1/2 0.840 1.0 24 525-00008400-003 24 15 21.24 .45 10.903/4 1.050 1.3 32 525-00010500-003 24 20 26.67 .59 14.531 1.320 1.5 24 525-00013200-003 16 25 33.40 .68 10.90

1 1/4 1.660 1.8 22 525-00016600-003 12 32 42.16 .82 9.991 1/2 1.900 2.7 33 525-00019000-003 12 40 48.26 1.23 14.98

2 2.375 3.5 42 525-00023800-003 12 50 60.33 1.59 19.07

Nom. PipeSize

Inches

PipeO.D.

Inches

Dimension Inches

B D L

1/2 .840 3.35 1.68 4.13

3/4 1.050 3.62 1.94 4.33

1 1.315 4.00 2.21 4.53

1 1/4 1.660 4.00 2.61 4.72

1 1/2 1.900 4.00 2.94 4.92

2 2.375 4.44 3.56 5.31

525 Dimensions

525 Compression Couplings

Adapter Gaskets

D

BL

Smith-Blair Inc.P. O. Box 5337

Texarkana, Texas 75505800-643-9705 870-773-5127800-648-6792 870-773-5212

www.smith-blair.com

Distributed By:

Expansion Joints611 612


Meets AWWA C221 Standards

2

All pipelines are subject to some degree of thermalexpansion and contraction, resulting from variations in theambient temperature or temperature of the line content s.

When pipe runs are long, the temperature differential isgreat, or movement of the supporting structure could occur,provision must be made to accommodate the changes inpipeline length caused by axial movement of the pipe.Such axial movement can cause high stress that couldresult in damage to the piping system and integralequipment unless provision has been made to allow freepipe displacement.

Normal amount s of axial pipe movement can beabsorbed within the resiliency of the rubber gasket inSmith-Blair bolted mechanical couplings. Where there areno bolted mechanical couplings or other flexible joints in thepiping system, or where the amount of concentrated pipemovement at one point is in excess of what can be safelyabsorbed by a coupling or other flexible joint, an expansionjoint must be used. For detailed information regarding theuse of bolted mechanical couplings to accommodate axialpipe movement, consult Smith-Blair Clamp and Couplingbrochure CC-411.

Product Number and Type Application For Pipe Sizes WorkingPressure* Temperature

611 Expansion Joints Single End-Without Slip Pipe-Without Limit Rods-With Slip Pipe-Without Limit Rods-With Slip Pipe-With Limit Rods

End Connections Available:Welding, flanged, threaded, grooved, plainfor locking or harnessed couplings (otherend connections available).

Absorbing change in lengthof pipeline due toconcentrated pipe

movement in a given area.

3" and larger

For use with any typeof pipe with sufficient

tensile strength toovercome the internal

friction of theexpansion joint andwith pipe joints that

cannot pull apart

150 PSIaccording to

size and design

-20°F to 180°F withStandard Nitrile Gaskets

Higher or lower withspecial gaskets

612 Expansion Joints Double End-Without Slip Pipe-Without Limit Rods-With Slip Pipe-Without Limit Rods-With Slip Pipe-With Limit Rods


Absorbing change in lengthof pipeline due toconcentrated pipe

movement in opposingdirections from a given point.

612 Expansion JointMUST always be anchored.

3" and larger




cannot pull apart

150 PSIaccording to

size and design



Pressure Balanced Expansion Joint-Without Slip Pipe-Without Limit Rods-With Slip Pipe-Without Limit Rods


Absorbing axial pipemovement and

pressure thrust to reduce anchor loads.

3" and larger




cannot pull apart

150 PSIaccording to

size and design



Selection Guide For Smith-Blair Expansion Joints

Expansion Joints

*Other pressure rated designs available.

CC-611 Revised 10/10

3

Smith-Blair Expansion Joints consist of a slip pipethat telescopes within a body to compensate for changes inthe length of a pipeline.

The body has a packing chamber that contains resilientpacking to form a seal between the body and the slip pipe.There is an adjustable packing gland that maintains theproper compaction of the p acking for the joint to functionproperly while maint aining a seal. The st andard p ackingconsists of square sections of specially compoundedrubber for sealing alternated with identically sized sectionsof lubricant impregnated fibrous material for lubrication. Itis designed so that repacking the gland, if required, can beeasily accomplished in a minimal of time without removingthe expansion joint from the line.

Smith-Blair Expansion Joints are carefully designedand manufactured according to specific engineeringrequirements. They are constructed of rugged welded steelto give long, trouble free service. They are simple to installand require minimum maintance.

Relief of stress buildup

Minimum pressure drop

Ample packing adjustment

Requires minimum service

No finite life span

Accommodate large amount of axial pipe movement

Compact (design requires minimum amount of sp ace)

No highly stressed flexing elements subject to fatiguefailure

Smith-Blair Slip T ype Exp ansion Joint s are p articularlysuited for applications where exp ansion and contraction isfrequent, or where there is large axial movement.

Expansion Joint Advantages

Hard Chrome-Plated Slip PipeThe exterior surface area of the slip pipe that will be in

contact with the packing during movement is hard chromeplated on a machined surface. The hard chrome-plating wasselected because: It protect s against corrosion and pitting, insuring free

movement of the slip pipe. Its hardness resists scratching and scoring to provide

a smooth surface. Its smoothness reduces friction and wear on the pack-

ing rings.Generous packing

The depth of the packing chamber, length of the packinggland, size of the p acking rings and quantity of the p ackingare carefully designed to provide tightness of the joint andto allow for considerable future tightening and adjustment ofthe packing before the addition of packing rings or repackingbecomes necessary.

Repack in the lineThere is adequate sp ace in the p acking gland to add

rings of p acking, or completely rep ack the joint withoutremoving the exp ansion joint from the line. The p ackinggland is always accessible.

LubricationWhen the service or the p acking is a type periodically

requiring lubrication, the packing chamber can be fitted with

a lantern ring and button head type lubrication fitting. Whenself l ubricating p acking ( lubricant i mpregnated f ibrousmaterial) is furnished, no lubrication fitting will be included.

Limit Rods (Optional)Limit rods perform three import ant function on

expansion joints: Limit the travel of the slip pipe. When two or more exp ansion joints are installed in a . section of pipe between two anchors, the limit rods will activate the adjacent expansion joint when one joint has reached the full limit of it s travel. The respective position of the limit adjusting nut s and

the limit ring indicate the position of the slip pipe withinthe body.

Expansion Joints

Expansion Joint Special Features


4

Bridge Crossings - Aerial Piping:Expansion Joints provide for thermal expansion and

contraction due to changes in ambient temperature. Theyalso provide for differential movement of the supportingstructure and pipeline.

Vertical Lines in Subsidence Areas:Expansion Joint s provide for change in the length of

pipe due to settlement of the building, dock, t ank or othersupporting structure or subsidence of the pipeline awayfrom a stable supporting structure.

Joining Above and Below Ground Piping:Expansion Joint s absorb thermal exp ansion and

contraction of the above ground pipe to prevent damage tothe piping system.

Lines Subject to Temperature Changes:Expansion Joints provide for thermal expansion and

contraction caused by changes in temperature of linecontents. Ideal for hot water lines, hot air lines, steam linesand other lines subject to temperature changes:

Applications

A 16 inch pipeline was laid on this bridge at the time of construction. The bridge is approximately a mile long. The concrete deck was to be poured 160 tons at a time.Nine Smith-Blair Expansion Joints were installed in the pipeline at approximately 600 foot intervals to absorb the change in length of the pipeline due to settlement whenthe deck was poured and to provide for thermal exp ansion and contraction due to changes in ambient temperature during the life of the pipeline.

A Smith-Blair® 24 inch 612 Double End Expansion Joint with stainless steel slippipe galvanized coating.

Four Smith-Blair 61 1 Exp ansion Joint s inst alled on a steel bridge toaccommodate thermal expansion and contraction.


5

611 Expansion Joints, Single End

611 Single End Exp ansion Joint s are slip-typejoints that provide for exp ansion/contraction inpipelines.

The standard model provides for 10 inches ofconcentrated axial pipe movement (traverse). Whenrequired, Model 611 Expansion Joints can be designedfor any amount of movement (more or less than 10inches). They are available in several configurations tomeet varying application requirements (without slip pipewithout limit rods, with slip pipe without limit rods or withslip pipe with limit rods).

For convenience of connecting the expansion jointinto the pipeline, 611 Expansion Joints can be furnishedwith various end configurations. The ends can bebeveled for welding, flanged, threaded, grooved andplain e nd f or u se w ith l ocking t ype o r h arnessedmechanical couplings. They can also be furnished withmixed end connections (i.e. one end flanged and oneend beveled for welding).

Standard model 61 1 Exp ansion Joint s aremanufactured from carbon steel and furnished with ahard chrome-plated slip pipe. When service conditionsdictate, stainless steel slip pipe can be furnished or theexpansion joint can be fabricated from various types ofweldable metals such as monel, st ainless steel or highstrength low alloy steel.

611 Expansion Joints can be furnished with a built-in anchor base when required.

Material SpecificationsBODY: Carbon Steel AISI C1015-20 or ASTM A283

GR. C.

SLIP PIPE: Carbon Steel ASTM A53, ASTM A283 or AISIC1015-20. Hard chrome-plated on a machined surface.

GASKET: Alternate square rings of lubricant impregnatedfibrous packing and Nitrile (Buna-N) rubber-compounded to resist oil, natural gas, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals (contact Smith-Blairengineers for applications involving chemicals).Temperature range: -20°F to 180°F. For higher or lower temperatures, other types of p acking materials can be furnished.

LIMIT RODS: High strength low alloy steel with heavy, semifinished hexagon nuts.

BODYSTUDS&High strength low alloy steel with heavy, semiBOLTS & NUTS: finished hexagon nuts.

OPTIONAL: Stainless Steel hardware for corrosive applic-ations to allow re-torque of packing material.

Other materials available.Material Specifications are subject to change.

LimitAdjusting Nuts

Limit Ring

LimitRods

PackingGland

BodyFlange

Slip Pipe(chrome-plated on

a machined surface)

Body Stop

Nitrile (Buna-N)Rubber Packing

LubricantImpregnated Fibrous Packing

GlandBolts

PackingChamber


With Slip Pipe - With Limit Rods - Open (Cold) Length 40 1/2” (L) Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 611-03503010-000 804 4.50 611-04503010-000 1006 6.63 611-06633010-000 1508 8.63 61 1-08633010-000 200

10 10.75 611-10753010-000 26512 12.75 611-12753010-000 33014 14.00 611-14003010-000 38016 16.00 611-16003010-000 43018 18.00 611-18003010-000 48020 20.00 611-20003010-000 54022 22.00 611-22003010-000 59524 24.00 61 1-24003010-000 650

With Slip Pipe - Without Limit Rods - Open (Cold) Length 38” (L) Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 611-03502010-000 754 4.50 611-04502010-000 906 6.63 611-06632010-000 1258 8.63 61 1-08632010-000 200

10 10.75 611-10752010-000 27012 12.75 611-12752010-000 30014 14.00 611-14002010-000 33516 16.00 611-16002010-000 38518 18.00 611-18002010-000 47520 20.00 611-20002010-000 52022 22.00 611-22002010-000 56024 24.00 61 1-24002010-000 625

Without Slip Pipe - Without Limit Rods - Open (Cold) Length 26” Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 611-03501010-000 504 4.50 611-04501010-000 656 6.63 611-06631010-000 908 8.63 61 1-08631010-000 125

10 10.75 611-10751010-000 16512 12.75 611-12751010-000 19514 14.00 611-14001010-000 22016 16.00 611-16001010-000 25018 18.00 611-18001010-000 28020 20.00 611-20001010-000 31022 22.00 611-22001010-000 34024 24.00 61 1-24001010-000 370

6

611 Expansion Joints, Single End(10” Expansion) - Plain Ends Beveled for W elding

When expansion joints are furnished without slip pipes, the customer is responsible for providing a smooth surfaced, properly s ized slip pipe and assumes all responsibilityfor proper operation of the exp ansion joint. The customer furnished slip pipe must have a prep ared end at least 24 inches long that is round, smooth and no greater than+.030” or -.010” from nominal size.

Larger sizes--up to 96” available on request. Other types of end connections available on request.

Stop Body Packing Chamber Packing Gland

Packing

Gland BoltBody Flange

A


PackingASlip Pipe

Slip Pipein ClosedPosition


L


PackingSlip Pipe


Limit RodLimit Adjusting Nuts

LimitRing

A


L


With Slip Pipe - With Limit Rods - Open (Cold) Length 50 1/2” (L) Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 611-03505010-000 954 4.50 611-04505010-000 1256 6.63 611-06635010-000 1858 8.63 61 1-08635010-000 260

10 10.75 611-10755010-000 35012 12.75 611-12755010-000 46014 14.00 611-14005010-000 56016 16.00 611-16005010-000 68518 18.00 611-18005010-000 74020 20.00 611-20005010-000 87022 22.00 611-22005010-000 96524 24.00 61 1-24005010-000 1090

With Slip Pipe - Without Limit Rods - Open (Cold) Length 39” (L) Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 611-03504010-000 904 4.50 611-04504010-000 1156 6.63 611-06634010-000 1658 8.63 61 1-08634010-000 260

10 10.75 611-10754010-000 35512 12.75 611-12754010-000 42514 14.00 611-14004010-000 51516 16.00 611-16004010-000 58018 18.00 611-18004010-000 73520 20.00 611-20004010-000 85022 22.00 611-22004010-000 93024 24.00 61 1-24004010-000 1065

7

Larger sizes up to 96” available on request. Other types of end connections available on request.

Slip-type exp ansion joint s must be inst alled in an accessible location for future maintenance and p ackingadjustment.

When more than one Smith-Blair Expansion Joint is installed in a straight segment of pipe between two anchors, it musthave limit rods. The limit rods limit the movement of each joint when the pipe contract s and internal stops (optional) willlimit the movement in each joint when the pipe exp ands.

*Pipe stop optional.

611 Expansion Joints, Single End(10” Expansion) - Flanged Ends

Stop* Body Packing Chamber Packing Gland

PackingSlip Pipe


A


L

Stop* Body Packing Chamber Packing Gland

PackingSlip Pipe


Limit RodLimit Adjusting Nuts

LimitRing A


L


8

612 Expansion Joints (Double End)

612 Double End Expansion Joints are slip typejoints with a slip pipe at each end to accommodateaxial pipe movement. The st andard model providesfor 10 inches of concentrated axial pipe movement(traverse) - five inches at each end. Other lengths canbe constructed accommodating movement from 1”through 36”. They are available without slip pipe, withslip pipe without limit rods or with slip pipe with limitrods.

For convenience of connecting the exp ansionjoint into the pipeline, they can be furnished withvarious end configurations. The ends can be beveledfor welding, flanged, threaded, grooved or plain endfor use with locking type or harnesses mechanicalcouplings. They can also be furnished with mixed endconnections (i.e. one end flanged and one endbeveled for welding).

612 Double End Expansion Joints MUST alwaysbe anchored to prevent the total pipe movement fromaccumulating in one end.

Standard model Smith-Blair 612 Expansion Jointsare manufactured from carbon steel and furnishedwith a hard chrome-plated slip pipe. When serviceconditions dict ate, st ainless steel slip pipes can befurnished or the exp ansion joint can be fabricatedfrom various types of weldable metals such as monel,stainless steel or high strength low alloy steel.

612 Exp ansion Joint s can be furnished with abuilt-in anchor base upon request.

LimitRods

GlandBolts

Nitrile (Buna-N)Rubber Packing

PackingChamber

LubricantImpregnated

Fibrous Packing

LimitAdjusting

Nuts

PackingGland

Slip Pipe(chrome-platedon a machined

surface)

StopBody

BodyFlange

LimitRing

Material SpecificationsBODY: Carbon Steel AISI C1015-20 or ASTM A283

GR. C.

SLIP PIPE: Carbon Steel ASTM A53, ASTM A283 or AISIC1015-20. Hard chrome-plated on a machined surface.

GASKET: Alternate square rings of lubricant impregnatedfibrous packing and Nitrile (Buna-N) rubber-compounded to resist oil, natural gas, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals (contact Smith-Blairengineers for applications involving chemicals).Temperature range: -20°F to 180°F. For higher or lower temperatures, other types of p acking materials can be furnished.

LIMIT RODS: High strength low alloy steel with heavy, semifinished hexagon nuts.

BODYSTUDS&High strength low alloy steel with heavy, semiBOLTS & NUTS: finished hexagon nuts.

OPTIONAL: Stainless Steel hardware for corrosive applic-ations to allow re-torque of packing material.

Other materials available.Material Specifications are subject to change.


With Slip Pipe - With Limit Rods - Open (Cold) Length 54” L Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 612-03503010-000 1004 4.50 612-04503010-000 1306 6.63 612-06633010-000 1908 8.63 612-08633010-000 270

10 10.75 612-10753010-000 10012 12.75 612-12753010-000 13014 14.00 612-14003010-000 19016 16.00 612-16003010-000 27018 18.00 612-18003010-000 61020 20.00 612-20003010-000 70022 22.00 612-22003010-000 77024 24.00 612-24003010-000 840

With Slip Pipe - Without Limit Rods - Open (Cold) Length 48” L Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 612-03502010-000 854 4.50 612-04502010-000 1206 6.63 612-06632010-000 1608 8.63 612-08632010-000 230

10 10.75 612-10752010-000 29012 12.75 612-12752010-000 40514 14.00 612-14002010-000 47516 16.00 612-16002010-000 53018 18.00 612-18002010-000 57520 20.00 612-20002010-000 62522 22.00 612-22002010-000 67024 24.00 612-24002010-000 740

9


When expansion joints are furnished without slip pipes, the customer is responsible for providing a smooth surfaced, properly s ized slip pipe and assumes all responsibilityfor proper operation of the expansion joint.The customer furnished slip pipe must have a prep ared end at least 24 inches long that is round, smooth and no greater than +.0 30” or -.010” from nominal size.

Without Slip Pipe - Without Limit Rods - Open (Cold) Length 36” Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 612-03501010-000 604 4.50 612-04501010-000 756 6.63 612-06631010-000 1008 8.63 612-08631010-000 145

10 10.75 612-10751010-000 18012 12.75 612-12751010-000 20514 14.00 612-14001010-000 23516 16.00 612-16001010-000 26518 18.00 612-18001010-000 30520 20.00 612-20001010-000 33522 22.00 612-22001010-000 37024 24.00 612-24001010-000 400

Body Flange Stop Gland Bolt

Packing

Body Packing Chamber Packing Gland


L

Body PackingChamber

PackingGland

PackingSlip Pipe Slip Pipe

Slip Pipein

ClosedPosition


L

Body PackingChamber

PackingGland

PackingSlip Pipe Slip

Pipe

Slip Pipein

ClosedPosition

A

A

LimitRod

LimitAdjusting

Nuts

LimitRing

612 Expansion Joints, Double End(10” expansion, 5” each end)Plain End Beveled for Welding


With Slip Pipe--Without Limit Rods Open (Cold) Length 56” (L) Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 612-03504010-000 1004 4.50 612-04504010-000 1456 6.63 612-06634010-000 2008 8.63 612-08634010-000 290

10 10.75 612-10754010-000 37512 12.75 612-12754010-000 53514 14.00 612-14004010-000 58516 16.00 612-16004010-000 72518 18.00 612-18004010-000 83520 20.00 612-20004010-000 95522 22.00 612-22004010-000 104024 24.00 612-24004010-000 1180

With Slip Pipe--With Limit Rods Open (Cold) Length 71” (L) Steel Pipe Size

Catalog NumberWt.

EachLbs.

NominalPipe Size

Inches

Pipe O.D.Inches

(A)3 3.50 612-03505010-000 1154 4.50 612-04505010-000 1556 6.63 612-06635010-000 2308 8.63 612-08635010-000 330

10 10.75 612-10755010-000 43512 12.75 612-12755010-000 55514 14.00 612-14005010-000 66516 16.00 612-16005010-000 74518 18.00 612-18005010-000 87020 20.00 612-20005010-000 103022 22.00 612-22005010-000 114024 24.00 612-24005010-000 1280

10

612 Expansion Joints, Double End(10” expansion, 5” each end) - Flanged Ends


Slip-type exp ansion joint s must be inst alled in an accessible location for future maintenance and p ackingadjustment.

When more than one Smith-Blair expansion joint is installed in a straight segment of pipe between two anchors, they musthave limit rods. The limit rods will limit the movement of each joint when the pipe contract s and the internal stop s(optional) will limit the movement in each joint when the pipe exp ands.

Body Flange Stop Gland BoltL

Body PackingChamber

PackingGland


Pipe

Slip Pipein

ClosedPosition

A

A

LimitAdjusting

Nuts

LimitRing

Body Flange Stop Gland BoltL


Pipe

Slip Pipein

ClosedPosition

Body PackingChamber

PackingGland


11

Anchoring: Whether expansion joints are used ornot, proper anchoring is vit al to the normal operation ofany piping system. Exp ansion joint s will not functionproperly unless the pipeline where they are located issecurely anchored and guided. Anchors stabilize thepipeline where concentrated loads (terminal point s,changes in direction, valves, fitting etc) could occur .Anchors also divide the pipeline into straight runs ofindependently exp anding-contracting segment s, limitingthe thermal and mechanical changes in dimension toeach segment and establishing the limits of movement tobe absorbed by expansion joints.

Pipe anchors, designed to withstand all the forces andmovements which will be imposed upon them, are classedas either “main anchors” or “intermediate anchors.”

Main anchors are required at the terminal point s ofthe piping system, valves, changes in direction, junctions,and to control the pipe movement so expansion joints willfunction properly . Main anchors must be designed towithstand the full thrust resulting from the internal linepressure, plus the force required to actuate the expansionjoint slip pipe and the frictional forces created by the pipeguides and supports.

When an anchor is installed at a change in directionof the pipeline, there will also be a reaction force due tothe change in direction of flow of the line content s. Someapplications also require consideration of the weight of thepiping system and wind loads.

As a general rule, the total force imposed on any mainanchor located in a piping system is equal to the vectorsum of all forces imposed on that anchor by eachsegment of piping adjacent to the anchor, plus anyreaction force resulting from change in direction of thepiping. In the case of a reduction in line size, the tot alforce is equal to the difference between the larger andsmaller force, and is applied in the direction of the smallerforce.

Intermediate anchors can be installed anywhere in astraight run of pipe between the main anchors. They areused to divide the pipeline into straight, independentlyexpanding-contracting sections. The only forces toconsider are the frictional forces required to actuate theexpansion joint slip pipe and the frictional forces createdby the pipe alignment guides and support s. All otherforces at the intermediate anchor are acting in oppositionto each other and theoretically become zero.

If an Expansion Joint is installed at an anchor, itshould be within four pipe diameters.

Pressure thrust, resulting from internal line pressure,is the cross sectional area of the out side diameter of thepipe times the line pressure (PSIG).

Force required to actuate the expansion joint slip pipeis dependent upon the pipe size and tightness of thepacking gland. A good way to calculate this is 600 poundstimes the nominal pipe size.

Forces required to overcome the friction created bythe pipe alignment guides and pipe supports will dependon the type and number used. These forces must beobtained from the manufacturer of the guides support s.

Pipe alignment guides: Smith-Blair Exp ansionJoints are designed specifically to accommodate axialmovement of a pipeline. It is necessary to provide properand adequate guiding to assure free and concentricmovement of the slip pipe through the packing chamber topermit the Expansion Joint to function in a trouble-freemanner, providing satisfactory operation and long life witha minimum of maintenance.

Alignment guides are sleeves or frames fastened to arigid structure. They must be designed and constructed topermit free movement along the axis of the pipe, positivelyrestrict any lateral movement of the pipe and resistcorrosion to ensure continued trouble free service.

Proper placement of the alignment guides is veryimportant. The first alignment guide should be located asclose to the Exp ansion Joint as possible within amaximum of four pipe diameters.

The distance from the first to the second alignmentguide should be up to a maximum of 14 pipe diameters,not to exceed 18 feet. Additional alignment guides shouldbe calculated to keep the pipeline from bowing andpreserve the st ability of the system as axial loadingincreases, since any pipeline acts as a load-bearingcolumn.

Pipe support s, such as rollers, hangers or U-bolt scannot be considered alignment guides, as they aredesigned to carry the dead weight of the pipeline and it scontents.

Pipe s upports: Between alignment guides andanchors, it is necessary to support the pipe at regularintervals to keep it from sagging. Supports should also beinstalled where there is concentrated loading (i.e. valves,other heavy fittings or equipment). Pipe support s shouldbe designed to carry the tot al weight of the pipeline,valves, fittings and line contents. They should also be ableto withst and an y h orizontal thrust resulting fromexpansion or contraction of the pipe. Typical supports areU-bolts, roller supports and rod spring hangers.

In addition to the proper design and placement ofanchors, guides and supports, it is equally important toconsider the design of the structure to which they will beattached to ensure that it has sufficient strength to carrythe total load.

Anchoring, Guiding and Supporting Pipelines


Forces in Anchors (Axial Movement Only)

Anchors 1,5 and 7

Pressure thrust.Resistance from alignment guides and supports.Force to activate Expansion Joint.

Anchor 2 Resistance from alignment guides and supports.Force to activate Expansion Joint.

Anchor 3

Vector sum of pressure thrusts line 1 to 3 and 3to 4.Resistance from alignment guides and supports.Force to activate Expansion Joint.Reaction force at change of direction

Anchor 4

Line 4 to 5Pressure thrust.Resistance from alignment guides and supportsForce to activate Expansion Joint.Reaction force at change of direction.Line 3 to 6Pressure thrust line 3 to 4 minus pressure thrust4 to 6.Resistance from alignment guides and supportsline 3 to 4 minus line 4 to 6.Force to activate Expansion Joints Line 3 to 4minus line 4 to 6.

Anchor 6

Vector sum of pressure thrust lines 4 to 6 and 6to 7Resistance from alignment guides and supports.Force to activate Expansion Joint.Reaction force at change of direction

12

Typical Expansion Joint InstallationsEconomy in alignment guides can be obt ained by

locating an expansion joint within four diameters of ananchor. Pipe alignment guides are then required onone side only. Expansion joints located in the line awayfrom anchors require alignment guides on both sides.

Typical Anchor InstallationsAnchors 1, 3, 4, 5, 6 and 7 are “Main Anchors”.Anchor 2 is an “Intermediate Anchor.Considering axial extension and compression only

and assuming that the pipe is properly supported, theforces on each anchor will be shown below:

611 Single End Expansion Joint installed within 4 pipe diametersof an anchor.

611 Single End Expansion Joint installed in the line away from theanchors.

611 Single End Expansion Joint installed within four diameters ofan intermediate anchor.

612 Double End Anchored Expansion Joint installed in a line mid-way between two main anchors.Expansion Joints must be anchored

Two 611 Single End Expansion Joints with limit rods installed in aline between two anchors.

Additional Information

LegendMain Anchor

Intermediate Anchor

Alignment Guide

611 Single End Expansion Joint

611 Single End Expansion Joint with Limit Rods

612 Double End Expansion Joint Anchored

Pipe installed with proper anchors, alignment guidesand supports usually remains that way unless there isa malfunction or anchor failure.

1

2

3 4

5

6

7


13

Linear Expansion of Pipe

Expansion values given are approximate but are correct to thebest known information.

To determine the change in length of a pipeline due tothermal expansion or contraction:1. Determine the temperature range from the maximum

and minimum temperature given.2. From the chart at the lef t, find the increase in inches

per 100 feet of pipe at the temperature for the type ofpipe involved.

3. Divide the increase in inches per 100 feet by 100and multiply by the length of the pipeline.

4. Add 10% to the calculated change in length to allowfor unforeseen temperature extremes, or forinstallation discrepancies.

Example 1:500 Feet Steel Pipeline

Maximum Operating Temperature 130°FMinimum Operating Temperature .-20°F

Temperature Range 150°F

Change in length per 100 f t. of steel pipe at150°F = 1.15”

1.15 x 500 = 5.75” Change in length of 500 f t. Steel Pipe100

5.75 x 1.10 = 6.33” Allowance for thermal expansion/con-traction

Example 2:800 Foot Steel Pipe Line

Maximum Operating Temperature 110°FMinimum Operating Temperature 40°F

Temperature Range 70°F

Change in length per 100 f t. of steel pipe at 70°F = .532”

.532 x 800 = 4.26” Change in length of 800 f t. of Steel Pipe100

4.26 x 1.10 = 4.67” Allowance for thermal expansion/con-traction

TemperatureDifferential

DegreesFahrenheit

Increase in Inches Per 100 Ft. of Pipe From 0 toTemperature Indicated

Steel Cast Iron WroughtIron

Brass &Copper

0102030405060708090

0.0000.0760.1520.2280.3040.3800.4650.5320.6080.684

0.0000.0720.1440.1260.2880.3600.4320.5040.5760.648

0.0000.0790.1580.2370.3160.3950.4740.5530.6320.711

0.0000.1140.2280.3420.4560.5700.6840.7980.9121.026

100125150175

0.760.921.151.34

0.720.881.101.28

0.790.971.211.41

1.141.401.752.04

200225250275

1.571.781.992.26

1.501.701.902.15

1.651.872.092.36

2.382.703.023.42

300325350375

2.482.732.943.31

2.352.602.903.15

2.582.863.083.46

3.744.134.455.01

400425450475

3.463.864.084.41

3.303.683.894.20

3.634.054.284.62

5.245.856.186.68

500525550575

4.674.995.305.63

4.454.755.055.36

4.905.235.555.90

7.067.558.038.52

600625650675

5.986.356.717.12

5.706.056.406.78

6.266.657.057.46

9.069.62

10.1810.78

700725750775

7.507.968.368.84

7.157.587.968.42

7.868.338.75

12.66

11.3712.0612.6613.38

800 9.31 8.87 9.76 14.10

Calculating Pipe Expansion


14

General Recommendations

The exp ansion joint selected must accommodateaxial movement at least equal to the maximumanticipated pipe movement.

Slip type exp ansion joints must always be inst alledin an accessible location to permit maintance andadjustment.

Proper positioning of the slip pipe is extremelyimportant when inst alling exp ansion joint s. If the slippipe is not properly positioned, the exp ansion joint willnot have the full axial movement designed into it. Axialmovement of the pipe could result in damage to thepipeline, expansion joint or other equipment.

When dividing a pipeline into independentexpanding and contracting segments by the placementof main anchors and intermediate anchors, it isdesirable to make the segments approximately thesame length, if possible. This will require all exp ansionjoints to accommodate approximately the same amountof axial movement and simplify ordering, design andinstallation.

When laying long runs of pipe and inst alling theexpansion joint s later , the practice of leaving randomgaps in the line for the exp ansion joints should not bepermitted. A space in the pipeline the exact length forproper adjustment of the exp ansion joint should beprovided at the time of installation.

When expansion joints are installed in the pipelineby welding, care must be taken that no welding slag getson the slip pipe.

Before applying hydrostatic tests on a piping systemwith expansion joints, be sure all of the anchors andalignment guides are properly installed.

Expansion joints installed below ground must be ina vault. Earth backfill comp acted around the exp ansionjoint will prevent it from functioning properly.

MANDATORY ORDERING CHECKLIST1. Quantity 2. Pipe size and type, outside diameter, and wall thick-

ness.3. Type of inst allation--steam lines, bridge crossing,

slurry line, etc.4. Line content5. Maximum working pressure.6. Maximum and minimum temperature.7. Amount of axial movement to be t aken care of by

each expansion joint.8. Frequency of cycling.9. Type of slip pipe (chrome-plated, stainless steel,

etc...)10. Special coatings or materials requirements.11. End preparation (how will the expansion joint be tied

into the line? Welded, flanged, threaded, etc...)12. How will the pipe be supported and anchored?13. Any information concerning unusual installation or

service requirements.


15

Other Smith-Blair Products


Tapping Sleeve Optional stainless steel

for corrosive environments(CC-620)

4" and larger: reducing and size-on-size flanged outlets. Available with 3/4”-6” threadedoutlets.

Steel, cast iron,asbestos cement,PVC¹, other

4" and largerreducing

and size-on-size

150 PSI + depending on flange

Tapping SleeveCarbon Steel

Mechanical Joint (CC-620)

Reducing size-on-sizeflanged outlets 4" and up


4" and largerreducing and size-on-size

150 PSI + depending on flange

Tapping Sleeve for concrete steel pipe

(CC-620)Reducing flanged outlets Concrete steel

cylinder12" and larger

reducing sizes only

150 PSI + depending on flangeand pipe diameter

Stainless Steel or Carbon Steel

Weld-on Outlet

Reducing flanged outlet thatcan be welded onto any steelpipe

Steel 4" & larger 150 PSI + depending on flange

Tapping Sleevestainless steel, epoxycoated carbon steel

flange(CC-620)

Reducing size-on-sizeflanged outlets


4" thru 24"Up to 200 PSI depending

on flange and pipediameter

see footnote*

Tapping Sleeveall stainless steel

(CC-620)Outlet sizes 4"-12"


4" thru 24"Up to 200 PSI depending

on flange and pipediameter

see footnote*Tapping Sleeve

stainless steel, epoxycoated carbon steel flange

with drop in Bolts (CC-620)

Reducing size-on-sizeflanged outlets


4" thru 24"Up to 150 PSI

depending on flangeand pipe diameter*

Tapping Sleeve all stainless steel

with drop in bolts (CC-620)Outlet sizes 4"-12"


4" thru 24"Up to 150 PSI

depending on flangeand pipe diameter*

MJ Outlet available on any style tapping sleeve

(CC-620)

Taps utilizing standard MJ valve

For details, seetype and size of tapping sleeve


of tapping sleeve

For details, see typeand size

of tapping sleeve

Line Stop Outlet availableon any style tapping

sleeve(CC-620)

Line stopping and plugingFor details, seetype and size of tapping sleeve

4" thru 12"Other sizesavailable

For details, see typeand size

of tapping sleeve

623

625

662

663

664

665

MJ

680

622

626

* The allowable working pressure of a pipe repair clamp decreases as pipe diameter increases (regardless of manufacturer).For a particular installation, the allowable working pressure will be determined by the size of pipe, type of pipe, type of clamp, type and extent of damage, service conditions, environment al conditions, and installation workmanship.

** Higher pressure possible depending on application. Refer to appropriate product cat alog for further details.*** For service in corrosive environments.1 Wall Thickness Rating must be provided before ordering for proper selection and proper application.Suitable anchorage must be provided when pipe movement may occur .Standard gaskets are Nitrile (Buna N).Refer to appropriate product catalog for further details.


16 SWP/2500/1010

Although SMITH-BLAIR® has employed every ef fort to presentaccurate information, the technical performance data,installation recommendations, and specifications in this cat alogare presented merely as a guide. Each application must beevaluated relative to it s own “special conditions” and should bereviewed by a qualified engineer to verify that the statedpressures, temperatures, and other performance dat a areapplicable. Anyone making use of this information assumes allliabilities from such use.

WARRANTY: SMITH-BLAIR® warrants its products only againstdefects in materials and workmanship. SMITH-BLAIR’ s® liabilityand customer’s exclusive remedy under this warranty or anywarranty extends for a period of (1) year from the date of SMITH-BLAIR’s® shipment and is expressly limited to repayment of thepurchase price, rep air, or replacement, at SMITH-BLAIR’ s®options during said period, upon proof satisfactory to SMITH-BLAIR® and upon customer’s returning and prepaying all chargeson such products to factory or warehouse designated by SMITH-BLAIR®. THIS WARRANTY IS MADE EXPRESSL Y IN LIEU OFALL OTHER W ARRANTIES. EXPRESS, IMPLIED, ORSTATUTORY, WITH RESPECT TO QUALITY ,MERCHANTABILITY, OR FITNESS FOR A PARTICULARPURPOSE.

Distributed By:Sales and Manufacturing Facility

Smith-Blair, Inc.30 Globe Avenue


Texarkana, TX 75505Phone:(800) 643-9705 (870) 773-5127Fax:(800) 648-6792 (870) 773-5212

www.smith-blair.com

Clamp and Coupling Products CC 620 02/11

Tapping Sleeves622 623 624 625 626

662 663 664 665 680Meets AWWAC223 Standards

622 Tapping Sleeve

665 Tapping Sleevew/ MJ Outlet

623 Mechanical JointTapping Sleeve

625 Tapping Sleevefor Concrete Pipe

626 Weld-On OutletTapping Sleeve - Type 2

CC-620

Product Product Number and Type Application For Pipe Sizes

622 Tapping Sleeve

Reducing and Size-on-sizeflanged outlets on most types ofpipe. Also available with threaded or MJ outlets.

4" & larger

623 Carbon SteelMechanical Joint

Reducing and Size-on-size,flanged or MJ outlets 4" & larger

624 Carbon SteelMechanical Joint with MJ Ends

Reducing and Size-on-size, flangedor MJ outlets 4" & larger

625 Tapping Sleeve forConcrete Cylinder Pipe

Reducing flanged or MJ outlets onconcrete steel cylinder pipe 12" & larger

626 Weld-on Outlet Reducing flanged or MJ outlet that can be welded onto any steel pipe 4" & larger

662 Stainless Steel TappingSleeve with Flexi-BlueEpoxy Coated Flange

Reducing and Size-on-size flanged orMJ outlets - 4" thru 12" 4" thru 24"

663 Stainless Steel TappingSleeve with StainlessSteel Flange


664 Stainless Steel TappingSleeve with Flexi-CoatEpoxy Coated Flange


665 Stainless Steel TappingSleeve with Stainless Steel Flange


Tapping Sleeve w/MJ OutletOption Available on all SB Carbon Steel and StainlessSteel Tapping Sleeves

See page 19 for additional information

680 Series Tapping Sleeve with Line Stop Outlets See page 20 for additional information

2

Selection Guide

Smith-Blair® Tapping Sleeves

CC-620

Reduces InventoryBuilt in range means one

sleeve fits both classes of castiron or asbestos cement pipe.

Smith-Blair Tapping Slee-ves are fast and easy to installwith simple hand tools, requireno caulking or specialequipment and may be usedwith any standard tappingvalve.

The self-energizing gasketis designed to minimize rollingand binding during installation

and has a generous crosssection to assure a good sealevery time.

The built-in range of Smith-Blair Tapping Sleeves meansone sleeve fits several classesof pipe.

Ease of InstallationNo caulking, welding or

special tools needed. A wrenchto tighten bolts is the only toolrequired to install a sleeve onpipe.Non-Standard Sizes Available

Sleeves with heavy flangesor for non-standard size pipe areavailable on request.

Time SavingA normal crew can install and

complete taps in less time than ittakes to install a caulk typesleeve.

Reinforces PipeSleeve design directly

reinforces pipe without need ofshims or pads...also weighs lessthan heavy cast iron sleeves.

Benefits

Heavy weldedsteel outlet half.

Recessed cavity for mating to lip onstandard tapping valves per MSS SP60.

3/4-inch NPT test plug.

Double-radiushead special

alloy boltswith heavy

hex nuts andflat washers.

Roll resistant, self-energizingconcave wedge gasket.

Cutaway ViewShowing Gasket Section

Snug-fitting heavy steel back half eliminates deflection without shims or pads

3

622 Tapping SleeveCertified to NSF®/ANSI 61-GMeets AWWA C223 Standards

CC-620

Smith-Blair® 622 Tapping Sleeves consistof two sections of heavy welded steel that bolttogether on the pipe and seal against aconcave wedge gasket around the tap opening.

The outlet half has a recessed flat facedflange to mate with standard tapping valves perMSS SP60 up through 12 inch size-on-size.For tap sizes 14-inch and above, flanges canbe furnished to accommodate the valverequirements. The outlet half also has a 3/4inch NPT test plug.

Material SpecificationsBody: Carbon steel ASTM A283 Grade C.

Optional: All 304 stainless steel.

Flanges: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve Per MSS-SP 60. Optional: Other types of Flanges, threaded outlets;MJ Outlets.

Gasket: Nitrile (Buna-N) NSF® 61 listed. Concave Wedge Gasket--compounded to resist--water, oil, acids, alkalies, most (aliphatic) hydro-carbon fluids and many chemicals.Temperatures up to 180ºF.

Bolts, Nuts High strength low alloy steel with heavy semi-& Washers:finished hexagon nuts to ASTM A-307 (ANSI

A21.11) standards. Optional-type 304 stainless steel bolts and nuts are coated to prevent galling.

Finish: Fusion bonded Flexi-Coat® epoxy per AWWAC213, coated to an average of 12 mil thickness.


OutletSize

NominalBody Size

Body Thickness(in) A (in) B (in) C (in) D (in) E F (in)

44 9 5 5 1/16 4 1/32 6 5/86 3/8 12 5 5 1/16 4 19/32 8 5/8

8 - 30 3/8 12 5 5 1/16 4 19/32 6 3/4

6 6 3/8 12 5 7 1/16 6 1/18 8 5/88 - 30 3/8 12 5 7 1/16 6 1/2 6 3/4

8 8 3/8 16 5 9 1/16 8 1/8 8 3/410 - 30 3/8 16 5 9 1/16 8 1/2 8 3/4

10 10 - 30 3/8 20 5 11 3/32 10 1/4 10 3/4

12 14 - 24 3/8 20 5 13 3/32 12 1/4 10 3/430 3/8 24 5 13 3/32 12/1/4 12 3/4

Roll ResistantWill not roll or bind on installation.

Self-EnergizingSeal increases with line pressure.

Generous Cross SectionAssures a good seal even on rough or pitted pipe.

Field TestedField tests, as well as lab tests, have consistentlyproven wedge gasket performance superior to O-ring,modified O-Ring or flat gasket performance.

Exclusive Concave Wedge Gasket

622 Tapping Sleeve Dimensional Data

4

1/4” Top x3/16” Bottom

Larger sizes and outlets available on request.For MJ Outlets, replace the last 2 “00”s in the middle eight digits with MJ. Example: 622-127504MJ-003.


QTY ESize F

FlangedOutlet

GasketB

RunPipeO.D.

ABolts

C

D

3/4”NPTTestPlug

5/16”

OverallDimension

Pipe O.D. + 6”

CC-620

Nominal Size ofPipe x Flanged

Outlet

O. D. Range (Inches)

Flexi-Coat® Epoxywith Alloy Bolts

Flexi-Coat® Epoxywith Stainless Steel Bolts

Weight Each

PoundsCatalog Number Catalog Number4 x 4*4 x 4*

4.50 622-04500400-203 622-04500400-231 344.80 622-04800400-203 622-04800400-231 34

4-5 x 6 5.00-5.22 622-05100400-203 622-05100400-231 346 x 46 x 6* 6.57-6.73 622-06630400-003 622-06630400-031 71

622-06630600-203 622-06630600-231 766 x 46 x 6* 6.90-7.20 622-06900400-003 622-06900400-031 71

622-06900600-203 622-06900600-231 766 x 46 x 6* 7.07-7.40 622-07200400-003 622-07200400-031 71

622-07200600-203 622-07200600-231 766 x 4 7.40-7.73 622-07450400-003 622-07450400-031 718 x 48 x 6 7.80-8.13 622-08000400-003 622-08000400-031 78

622-08000600-003 622-08000600-031 878 x 48 x 68 x 8*

8.36-8.75622-08630400-003 622-08630400-031 78622-08630600-003 622-08630600-031 87622-08630800-203 622-08630800-231 117

8 x 8* 8.73-9.12 622-08800800-203 622-08800800-231 788 x 48 x 68 x 8*

9.05-9.40622-09050400-003 622-09050400-031 78622-09050600-003 622-09050600-031 87622-09050800-203 622-09050800-231 117

8 x 48 x 68 x 8*

9.27-9.69622-09400400-003 622-09400400-031 78622-09400600-003 622-09400600-031 87622-09400800-203 622-09400800-231 117

8-10 x 48-10 x 68-10 x 8*

9.68-10.10622-10000400-003 622-10000400-031 82622-10000600-003 622-10000600-031 94622-10000800-203 622-10000800-231 125

10 x 410 x 610 x 810 x 10*

10.45-10.88

622-10750400-003 622-10750400-031 82622-10750600-003 622-10750600-031 94622-10750800-003 622-10750800-031 125622-10751000-203 622-10751000-231 138

10 x 410 x 610 x 810 x 10*

11.03-11.47

622-11100400-003 622-11100400-031 82622-11100600-003 622-11100600-031 94622-11100800-003 622-11100800-031 125622-11101000-203 622-11101000-231 138

10 x 410 x 610 x 810 x 10*

11.36-11.80

622-11400400-003 622-11400400-031 82622-11400600-003 622-11400600-031 94622-11400800-003 622-11400800-031 125622-11401000-203 622-11401000-231 138

10-12 x 410-12 x 610-12 x 810-12 x 10*

11.76-12.20

622-12000400-003 622-12000400-031 97622-12000600-003 622-12000600-031 103622-12000800-003 622-12000800-031 135622-12001000-203 622-12001000-231 170

12 x 412 x 612 x 812 x 1012 x 12*

12.42-12.88

622-12750400-003 622-12750400-031 97622-12750600-003 622-12750600-031 103622-12750800-003 622-12750800-031 135622-12751000-003 622-12751000-031 170622-12751200-203 622-12751200-231 201

*Size-on-Size Taps Require a 1/2” undersize shell cutter.Larger Size-on-Size and smaller size Tapping Sleeves are available upon request.Also available in all stainless steel material.For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example: 622-127504MJ-003.

5


CC-620


Outlet




WeightEach

PoundsCatalog Number Catalog Number12 x 412 x 612 x 812 x 1012 x 12*

13.13-13.60

622-13200400-003 622-13200400-031 97622-13200600-003 622-13200600-031 103622-13200800-003 622-13200800-031 135622-13201000-003 622-13201000-031 170622-13201200-203 622-13201200-231 201

12 x 412 x 612 x 812 x 1012 x 12*

13.60-14.09

622-13820400-003 622-13820400-031 97622-13820600-003 622-13820600-031 103622-13820800-003 622-13820800-031 135622-13821000-003 622-13821000-031 170622-13821200-203 622-13821200-231 201

12 x 412 x 612 x 812 x 1012 x 12*

14.10-14.58

622-14250400-003 622-14250400-031 103622-14250600-003 622-14250600-031 111622-14250800-003 622-14250800-031 145622-14251000-003 622-14251000-031 204622-14251200-203 622-14251200-231 229

12 x 412 x 612 x 812 x 1012 x 12*

14.59-15.08

622-14750400-003 622-14750400-031 108622-14750600-003 622-14750600-031 111622-14750800-003 622-14750800-031 148622-14751000-003 622-14751000-031 204622-14751200-003 622-14751200-031 229

14 x 414 x 614 x 814 x 1014 x 12

15.23-15.72

622-15300400-003 622-15300400-031 108622-15300600-003 622-15300600-031 111622-15300800-003 622-15300800-031 148622-15301000-003 622-15301000-031 204622-15301200-003 622-15301200-031 229

14-16 x 414-16 x 614-16 x 814-16 x 1014-16 x 12

15.73-16.22

622-16000400-003 622-16000400-031 108622-16000600-003 622-16000600-031 111622-16000800-003 622-16000800-031 148622-16001000-003 622-16001000-031 204622-16001200-003 622-16001200-031 229

14-16 x 414-16 x 614-16 x 814-16 x 1014-16 x 12

16.30-16.73

622-16470400-003 622-16470400-031 108622-16470600-003 622-16470600-031 111622-16470800-003 622-16470800-031 148622-16471000-003 622-16471000-031 204622-16471200-003 622-16471200-031 229

14-16 x 414-16 x 614-16 x 814-16 x 1014-16 x 12

16.74-17.26

622-16840400-003 622-16840400-031 108622-16840600-003 622-16840600-031 111622-16840800-003 622-16840800-031 148622-16841000-003 622-16841000-031 204622-16841200-003 622-16841200-031 229

16 x 416 x 616 x 816 x 1016 x 12

17.33-17.87

622-17400400-003 622-17400400-031 117622-17400600-003 622-17400600-031 122622-17400800-003 622-17400800-031 162622-17401000-003 622-17401000-031 216622-17401200-003 622-17401200-031 245

16 x 416 x 616 x 816 x 1016 x 12

17.88-18.43

622-18000400-003 622-18000400-031 117622-18000600-003 622-18000600-031 122622-18000800-003 622-18000800-031 162622-18001000-003 622-18001000-031 216622-18001200-003 622-18001200-031 245

16 x 416 x 616 x 816 x 1016 x 12

18.46-19.03

622-18780400-003 622-18780400-031 117622-18780600-003 622-18780600-031 122622-18780800-003 622-18780800-031 162622-18781000-003 622-18781000-031 216622-18781200-003 622-18781200-031 245

*Size-on-Size Taps require a 1/2” undersize shell cutter. Larger Size-on-Size and smaller size Tapping Sleeves are available upon request. For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example 622-127504MJ-003. 14” and larger outlet sizesavailable (with limited range).

6


CC-620

Larger Size-on-Size and smaller size Tapping Sleeves are available upon request. 14” and larger outlet sizes available (with limited range).For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example: 622-127504MJ-003.


Outlet




WeightEach

PoundsCatalog Number Catalog Number18 x 418 x 618 x 818 x 1018 x 12

18.87-19.45

622-19200400-003 622-19200400-031 117622-19200600-003 622-19200600-031 122622-19200800-003 622-19200800-031 162622-19201000-003 622-19201000-031 216622-19201200-003 622-19201200-031 245

18 x 418 x 618 x 818 x 1018 x 12

19.41-20.01

622-19500400-003 622-19500400-031 117622-19500600-003 622-19500600-031 122622-19500800-003 622-19500800-031 162622-19501000-003 622-19501000-031 216622-19501200-003 622-19501200-031 245

18-20 x 418-20 x 618-20 x 818-20 x 1018-20 x 12

19.88-20.48

622-20000400-003 622-20000400-031 122622-20000600-003 622-20000600-031 130622-20000800-003 622-20000800-031 180622-20001000-003 622-20001000-031 232622-20001200-003 622-20001200-031 284

20 x 420 x 620 x 820 x 1020 x 12

20.29-20.92

622-20640400-003 622-20640400-031 122622-20640600-003 622-20640600-031 130622-20640800-003 622-20640800-031 180622-20641000-003 622-20641000-031 232622-20641200-003 622-20641200-031 284

20 x 420 x 620 x 820 x 1020 x 12

20.93-21.57

622-21320400-003 622-21320400-031 122622-21320600-003 622-21320600-031 130622-21320800-003 622-21320800-031 180622-21321000-003 622-21321000-031 232622-21321200-003 622-21321200-031 284

20 x 420 x 620 x 820 x 1020 x 12

21.51-22.15

622-21600400-003 622-21600400-031 122622-21600600-003 622-21600600-031 130622-21600800-003 622-21600800-031 180622-21601000-003 622-21601000-031 232622-21601200-003 622-21601200-031 284

20 x 420 x 620 x 820 x 1020 x 12

22.16-22.81

622-22680400-003 622-22680400-031 122622-22680600-003 622-22680600-031 130622-22680800-003 622-22680800-031 180622-22681000-003 622-22681000-031 232622-22681200-003 622-22681200-031 284

20 x 420 x 620 x 820 x 1020 x 12

22.78-23.45

622-22940400-003 622-22940400-031 133622-22940600-003 622-22940600-031 144622-22940800-003 622-22940800-031 197622-22941000-003 622-22941000-031 258622-22941200-003 622-22941200-031 284

20 x 420 x 620 x 820 x 1020 x 12

23.46-24.16

622-24000400-003 622-24000400-031 133622-24000600-003 622-24000600-031 144622-24000800-003 622-24000800-031 197622-24001000-003 622-24001000-031 258622-24001200-003 622-24001200-031 284

24 x 424 x 624 x 824 x 1024 x 12

24.15-24.85

622-24500400-003 622-24500400-031 133622-24500600-003 622-24500600-031 144622-24500800-003 622-24500800-031 197622-24501000-003 622-24501000-031 258622-24501200-003 622-24501200-031 284

24 x 424 x 624 x 824 x 1024 x 12

24.82-25.52

622-25020400-003 622-25020400-031 133622-25020600-003 622-25020600-031 144622-25020800-003 622-25020800-031 197622-25021000-003 622-25021000-031 258622-25021200-003 622-25021200-031 284

7


CC-620

Nominal Sizeof Pipe x

Flanged Outlet



Flexi-Coat® Epoxywith Stainless SteelBolts

WeightEach

PoundsCatalog Number Catalog Number24 x 424 x 624 x 824 x 1024 x 12

25.71-26.41

622-25800400-003 622-25800400-031 149622-25800600-003 622-25800600-031 157622-25800800-003 622-25800800-031 219622-25801000-003 622-25801000-031 286622-25801200-003 622-25801200-031 304

24 x 424 x 624 x 824 x 1024 x 12

26.55-27.25

622-27120400-003 622-27120400-031 149622-27120600-003 622-27120600-031 157622-27120800-003 622-27120800-031 219622-27121000-003 622-27121000-031 286622-27121200-003 622-27121200-031 304

24 x 424 x 624 x 824 x 1024 x 12

27.26-27.96

622-27460400-003 622-27460400-031 149622-27460600-003 622-27460600-031 157622-27460800-003 622-27460800-031 219622-27461000-003 622-27461000-031 286622-27461200-003 622-27461200-031 304

24 x 424 x 624 x 824 x 1024 x 12

28.14-28.84

622-28340400-003 622-28340400-031 149622-28340600-003 622-28340600-031 157622-28340800-003 622-28340800-031 219622-28341000-003 622-28341000-031 286622-28341200-003 622-28341200-031 304

30 x 430 x 630 x 830 x 1030 x 12

29.78-30.48

622-30000400-003 622-30000400-031 156622-30000600-003 622-30000600-031 160622-30000800-003 622-30000800-031 219622-30001000-003 622-30001000-031 292622-30001200-003 622-30001200-031 315

30 x 430 x 630 x 830 x 1030 x 12

30.48-31.18

622-30750400-003 622-30750400-031 156622-30750600-003 622-30750600-031 160622-30750800-003 622-30750800-031 219622-30751000-003 622-30751000-031 292622-30751200-003 622-30751200-031 315

30 x 430 x 630 x 830 x 1030 x 12

31.52-32.22

622-32000400-003 622-32000400-031 156622-32000600-003 622-32000600-031 160622-32000800-003 622-32000800-031 219622-32001000-003 622-32001000-031 292622-32001200-003 622-32001200-031 315

8


Larger Size-on-Size and Smaller Size Tapping Sleeves are available upon request.For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example: 622-127504MJ-003.

CC-620 9

Outlet Size NominalBody Size A (in.) B (in.) C (in.) D (in.) E F (in.)

44 15 5 5 1/16 4 3/16 8 5/8

6-18 15 5 5 1/16 4 3/4 8 5/820-24 20 5 5 1/16 4 3/4 15 5/8

66 15 5 7 1/16 6 5/16 8 5/8

8-18 15 5 7 1/16 6 3/4 8 5/820-24 20 5 7 1/16 6 3/4 15 5/8

88 20 5 9 1/16 8 3/8 10 5/8

10-18 20 5 9 1/16 8 3/4 10 5/820-24 25 5 9 1/16 8 3/4 24 5/8

1010 25 5 11 3/32 10 1/4 16 5/8

12-18 25 5 11 3/32 10 3/4 16 5/820-24 25 5 11 3/32 10 3/4 24 5/8

1212 25 5 13 3/32 12 1/4 16 5/8

14-18 25 5 13 3/32 12 3/4 16 5/820-24 25 5 13 3/32 12 3/4 24 5/8

Material SpecificationsBody: Full circumference band.

18-8 type 304 Stainless Steel.

Flanges: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve Per MSS-SP 60. Fusion bonded, Flexi-Coat® epoxy coated carbon steel on 662.18-8 type 304 stainless steel flange on 663.Optional: Other types of Flanges, threadedoutlets, MJ Outlets.

Gasket: Nitrile (Buna-N) NSF® 61 compounded to resistwater, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals.Temperatures up to 180ºF.

Bolts, Nuts 18-8 type 304 stainless steel heavy hex nuts,& Washers: stud bolts & washers. Nuts and studs are

coated to prevent galling.


Optional 316 Stainless Steel.For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example: 662-127504MJ-000.

(E) Qty. of Bolts(F) Bolt Size

662 - Carbon Flange Tapping Sleeve663 - Stainless Steel Flange Tapping SleeveStainless Steel Body and NeckCertified to NSF®/ANSI 61-G

662-663 Tapping Sleeve Specifications

A

B

C

D5/16”

CC-62010


Outlet

O. D. Range(Inches)

662Flexi-Coat®

Epoxy Coated Carbon Steel Flange

663Stainless

Steel Flange

Approx.WeightEach

PoundsCatalog Number Catalog Number

4 X 4 4.46-4.86 662-04800400-200 663-04800400-200 324 X 4 4.80-5.10 662-05000400-200 663-05000400-200 344 X 4 4.95-5.35 662-05100400-200 663-05100400-200 406 X 4 6.59-6.99 662-06630400-000 663-06630400-000 386 X 6 662-06630600-200 663-06630600-200 426 X 4 6.84-7.30 662-06900400-000 663-06900400-000 386 X 6 662-06900600-200 663-06900600-200 426 X 4 7.10-7.50 662-07200400-000 663-07200400-000 386 X 6 662-07200600-200 663-07200600-200 426 X 4 7.40-7.80 662-07450400-000 663-07450400-000 386 X 6 662-07450600-200 663-07450600-200 428 X 4 7.90-8.30 662-08000400-000 663-08000400-000 438 X 6 662-08000600-000 663-08000600-000 638 X 4

8.62-9.06662-08630400-000 663-08630400-000 43

8 X 6 662-08630600-000 663-08630600-000 478 X 8 662-08630800-200 663-08630800-200 638 X 4

8.99-9.45662-09050400-000 663-09050400-000 43

8 X 6 662-09050600-000 663-09050600-000 478 X 8 662-09050800-200 663-09050800-200 638 X 4

9.20-9.60662-09450400-000 663-09450400-000 43

8 X 6 662-09450600-000 663-09450600-000 478 X 8 662-09450800-200 663-09450800-200 638 X 4

9.60-10.00662-09650400-000 663-09650400-000 43

8 X 6 662-09650600-000 663-09650600-000 478 X 8 662-09650800-200 663-09650800-200 6310 X 4

9.90-10.30662-10000400-000 663-10000400-000 47

10 X 6 662-10000600-000 663-10000600-000 5110 X 8 662-10000800-000 663-10000800-000 7010 X 4

10.73-11.13

662-10750400-000 663-10750400-000 4710 X 6 662-10750600-000 663-10750600-000 5110 X 8 662-10750800-000 663-10750800-000 7010 X 10 662-10751000-200 663-10751000-200 7510 X 4

11.05-11.45

662-11100400-000 663-11100400-000 4710 X 6 662-11100600-000 663-11100600-000 5110 X 8 662-11100800-000 663-11100800-000 7010 X 10 662-11101000-200 663-11101000-200 7510 X 4

11.70-12.10

662-11750400-000 663-11750400-000 4710 X 6 662-11750600-000 663-11750600-000 5110 X 8 662-11750800-000 663-11750800-000 7010 X 10 662-11751000-200 663-11751000-200 7510 X 4

12.00-12.40

662-12000400-000 663-12000400-000 4710 X 6 662-12000600-000 663-12000600-000 5110 X 8 662-12000800-000 663-12000800-000 7010 X 10 662-12001000-200 663-12001000-200 75


For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example: 662-127504MJ-000.

CC-620


Outlet

O. D. Range(Inches)

662Flexi-Coat®


663Stainless

Steel Flange

Approx.Weight Each

PoundsCatalog Number Catalog Number12 x 4

12.50-12.90

662-12750400-000 663-12750400-000 5112 x 6 662-12750600-000 663-12750600-000 5512 x 8 662-12750800-000 663-12750800-000 7512 x 10 662-12751000-000 663-12751000-000 8012 x 12 662-12751200-200 663-12751200-200 11012 x 4

13.16-13.56

662-13200400-000 663-13200400-000 5112 x 6 662-13200600-000 663-13200600-000 5512 x 8 662-13200800-000 663-13200800-000 7512 x 10 662-13201000-000 663-13201000-000 8012 x 12 662-13201200-200 663-13201200-200 11012 x 4

13.60-14.09

662-13820400-000 663-13820400-000 5112 x 6 662-13820600-000 663-13820600-000 5512 x 8 662-13820800-000 663-13820800-000 7512 x 10 662-13821000-000 663-13821000-000 8012 x 12 662-13821200-200 663-13821200-200 11012 x 4

14.10-14.58

662-14250400-000 663-14250400-000 5112 x 6 662-14250600-000 663-14250600-000 5512 x 8 662-14250800-000 663-14250800-000 7512 x 10 662-14251000-000 663-14251000-000 8012 x 12 662-14251200-200 663-14251200-200 11014 x 4

15.30-15.80

662-15300400-000 663-15300400-000 7214 x 6 662-15300600-000 663-15300600-000 7614 x 8 662-15300800-000 663-15300800-000 9514 x 10 662-15301000-000 663-15301000-000 10214 x 12 662-15301200-000 663-15301200-000 13514 x 4

15.80-16.30

662-16000400-000 663-16000400-000 7214 x 6 662-16000600-000 663-16000600-000 7614 x 8 662-16000800-000 663-16000800-000 9514 x 10 662-16001000-000 663-16001000-000 10214 x 12 662-16001200-000 663-16001200-000 13514 x 4

16.40-16.80

662-16400400-000 663-16400400-000 7214 x 6 662-16400600-000 663-16400600-000 7614 x 8 662-16400800-000 663-16400800-000 9514 x 10 662-16401000-000 663-16401000-000 10214 x 12 662-16401200-000 663-16401200-000 13516 x 4

17.40-17.80

662-17400400-000 663-17400400-000 7716 x 6 662-17400600-000 663-17400600-000 8216 x 8 662-17400800-000 663-17400800-000 10316 x 10 662-17401000-000 663-17401000-000 10816 x 12 662-17401200-000 663-17401200-000 14516-18 x 4

18.60-19.20

662-18700400-000 663-18700400-000 7716-18 x 6 662-18700600-000 663-18700600-000 8216-18 x 8 662-18700800-000 663-18700800-000 10316-18 x 10 662-18701000-000 663-18701000-000 10816-18 x 12 662-18701200-000 663-18701200-000 14518-20 x 4

19.50-20.10

662-19500400-000 663-19500400-000 7818-20 x 6 662-19500600-000 663-19500600-000 8218-20 x 8 662-19500800-000 663-19500800-000 10518-20 x 10 662-19501000-000 663-19501000-000 11118-20 x 12 662-19501200-000 663-19501200-000 14718-20 x 4

20.90-21.59

662-20900400-000 663-20900400-000 7818-20 x 6 662-20900600-000 663-20900600-000 8218-20 x 8 662-20900800-000 663-20900800-000 10518-20 x 10 662-20901000-000 663-20901000-000 11118-20 x 12 662-20901200-000 663-20901200-000 147

11



CC-62012


Outlet

O. D. Range

(Inches)

662Flexi-Coat®


663Stainless

Steel Flange

Approx.Weight Each


20 x 4

21.60-22.40

662-21600400-000 663-21600400-000 8820 x 6 662-21600600-000 663-21600600-000 9420 x 8 662-21600800-000 663-21600800-000 11820 x 10 662-21601000-000 663-21601000-000 12420 x 12 662-21601200-000 663-21601200-000 16020-24 x 4

23.50-24.20

662-23500400-000 663-23500400-000 9520-24 x 6 662-23500600-000 663-23500600-000 10020-24 x 8 662-23500800-000 663-23500800-000 12220-24 x 10 662-23501000-000 663-23501000-000 13020-24 x 12 662-23501200-000 663-23501200-000 16924 x 4

25.80-26.60

662-25800400-000 663-25800400-000 9524 x 6 662-25800600-000 663-25800600-000 10024 x 8 662-25800800-000 663-25800800-000 12224 x 10 662-25801000-000 663-25801000-000 13024 x 12 662-25801200-000 663-25801200-000 17024 x 4

28.30-29.00

662-28300400-000 663-28300400-000 10324 x 6 662-28300600-000 663-28300600-000 10924 x 8 662-28300800-000 663-28300800-000 13324 x 10 662-28301000-000 663-28301000-000 14124 x 12 662-28301200-000 663-28301200-000 185



CC-620

Outlet Size NominalBody Size A (in) B (in) C (in) D (in) E (in) F (in)

44 15 5 5 1/16 4 3/16 8 5/8

6-18 15 5 5 1/16 4 3/4 8 5/820-24 20 5 5 1/16 4 3/4 8 5/8

66 15 5 7 1/16 6 5/16 8 5/8

8-18 15 5 7 1/16 6 3/4 8 5/820-24 20 5 7 1/16 6 3/4 10 5/8

88 20 5 9 1/16 8 3/8 10 5/8

10-18 20 5 9 1/16 8 3/4 10 5/820-24 25 5 9 1/16 8 3/4 14 5/8

1010 25 5 11 3/32 10 1/4 14 5/8

20-24 25 5 11 3/32 10 3/4 14 5/8

1212 25 5 13 3/32 12 1/4 14 5/8

14-24 25 5 13 3/32 12 3/4 14 5/8

Material SpecificationsBody: Full circumference band.

18-8 type 304 stainless steel.

Flanges: AWWA C207 Class D, ANSI 150# drilling. Recessed for Tapping Valve Per MSS-SP 60. Fusion bonded, Flexi-Coat® epoxy coated carbon steel on 664.18-8 type 304 stainless steel flange on 665. Optional: Other types of Flanges, threaded outlets, MJ Outlets

Gasket: Nitrile (Buna-N) NSF® 61 listed-compounded to resist water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals.Temperatures up to 180ºF.

Bolts, Nuts 18-8 type 304 stainless steel heavy hex nuts, & Washers: stud bolts & washers. Nuts and studs are coated

to prevent galling.


13

664-665 Tapping Sleeve Specifications


5/16

(E) Qty. of Bolts(F) Size of Bolts

A

CD

B

For MJ Outlets, replace the last 2 “00”s in the middle eight digits with “MJ”. Example 664-127504MJ-000.

CC-62014


Outlet

O. D. Range

(Inches)

664Flexi-Coat®


665Stainless

Steel Flange

Approx.Weight Each


4 x 4 4.50-4.80 664-04800400-200 665-04800400-200 344 x 4 4.80-5.10 664-05000400-200 665-05000400-200 426 x 4 6.59-6.99 664-06630400-000 665-06630400-000 556 x 6 664-06630600-200 665-06630600-200 616 x 4 6.84-7.30 664-06900400-000 665-06900400-000 556 x 6 664-06900600-200 665-06900600-200 616 x 4 7.10-7.50 664-07200400-000 665-07200400-000 556 x 6 664-07200600-200 665-07200600-200 616 x 4 7.40-7.80 664-07450400-000 665-07450400-000 556 x 6 664-07450600-200 665-07450600-200 618 x 4 7.90-8.30 664-08000400-000 665-08000400-000 648 x 6 664-08000600-000 665-08000600-000 728 x 4

8.62-906664-08630400-000 665-08630400-000 64

8 x 6 664-08630600-000 665-08630600-000 728 x 8 664-08630800-200 665-08630800-200 938 x 4

8.99-9.45664-09050400-000 665-09050400-000 64

8 x 6 664-09050600-000 665-09050600-000 728 x 8 664-09050800-200 665-09050800-200 938 x 4

9.20-9.60664-09450400-000 665-09450400-000 64

8 x 6 664-09450600-000 665-09450600-000 728 x 8 664-09450800-200 665-09450800-200 938 x 4

9.60-10.00664-09650400-000 665-09650400-000 64

8 x 6 664-09650600-000 665-09650600-000 728 x 8 664-09650800-200 665-09650800-200 9310 x 4

9.90-10.30664-10000400-000 665-10000400-000 61

10 x 6 664-10000600-000 665-10000600-000 6510 x 8 664-10000800-000 665-10000800-000 8810 x 4

10.73-11.13

664-10750400-000 665-10750400-000 6110 x 6 664-10750600-000 665-10750600-000 6510 x 8 664-10750800-000 665-10750800-000 8810 x 10 664-10751000-200 665-10751000-200 9510 x 4

11.05-11.45

664-11100400-000 665-11100400-000 6110 x 6 664-11100600-000 665-11100600-000 6510 x 8 664-11100800-000 665-11100800-000 8810 x 10 664-11101000-200 665-11101000-200 9510 x 4

11.70-12.10

664-11750400-000 665-11750400-000 6110 x 6 664-11750600-000 665-11750600-000 6510 x 8 664-11750800-000 665-11750800-000 8810 x 10 664-11751000-200 665-11751000-200 9510 x 4

12.00-12.40

664-12000400-000 665-12000400-000 6110 x 6 664-12000600-000 665-12000600-000 6510 x 8 664-12000800-000 665-12000800-000 8810 x 10 664-12001000-200 665-12001000-200 95



CC-620


Outlet

O. D. Range

(Inches)

664Flexi-Coat®


665Stainless

Steel Flange

Approx.WeightEach

PoundsCatalog Number Catalog Number12 x 4

12.50-12.90

664-12750400-000 665-12750400-000 6512 x 6 664-12750600-000 665-12750600-000 6912 x 8 664-12750800-000 665-12750800-000 9512 x 10 664-12751000-000 665-12751000-000 10112 x 12 664-12751200-200 665-12751200-200 13812 x 4

13.16-13.56

664-13200400-000 665-13200400-000 6512 x 6 664-13200600-000 665-13200600-000 6912 x 8 664-13200800-000 665-13200800-000 9512 x 10 664-13201000-000 665-13201000-000 10112 x 12 664-13201200-200 665-13201200-200 13812 x 4

13.60-14.09

664-13820400-000 665-13820400-000 6312 x 6 664-13820600-000 665-13820600-000 6712 x 8 664-13820800-000 665-13820800-000 9012 x 10 664-13821000-000 665-13821000-000 11312 x 12 664-13821200-200 665-13821200-200 12812 x 4

14.10-14.58

664-14250400-000 665-14250400-000 6412 x 6 664-14250600-000 665-14250600-000 6812 x 8 664-14250800-000 665-14250800-000 9112 x 10 664-14251000-000 665-14251000-000 11512 x 12 664-14251200-200 665-14251200-200 13014 x 4

15.30-15.80

664-15300400-000 665-15300400-000 6314 x 6 664-15300600-000 665-15300600-000 6714 x 8 664-15300800-000 665-15300800-000 9014 x 10 664-15301000-000 665-15301000-000 11314 x 12 664-15301200-000 665-15301200-000 12814 x 4

15.80-16.30

664-16000400-000 665-16000400-000 6414 x 6 664-16000600-000 665-16000600-000 6814 x 8 664-16000800-000 665-16000800-000 9114 x 10 664-16001000-000 665-16001000-000 11514 x 12 664-16001200-000 665-16001200-000 13014 x 4

16.40-16.80

664-16400400-000 665-16400400-000 7014 x 6 664-16400600-000 665-16400600-000 7314 x 8 664-16400800-000 665-16400800-000 9814 x 10 664-16401000-000 665-16401000-000 12314 x 12 664-16401200-000 665-16401200-000 13216 x 4

17.40-17.80

664-17400400-000 665-17400400-000 6816 x 6 664-17400600-000 665-17400600-000 7116 x 8 664-17400800-000 665-17400800-000 9516 x 10 664-17401000-000 665-17401000-000 12016 x 12 664-17401200-000 665-17401200-000 13516-18 x 4

18.60-19.20

664-18700400-000 665-18700400-000 7016-18 x 6 664-18700600-000 665-18700600-000 7316-18 x 8 664-18700800-000 665-18700800-000 9816-18 x 10 664-18701000-000 665-18701000-000 12316-18 x 12 664-18701200-000 665-18701200-000 13818-20 x 4

19.50-20.10

664-19500400-000 665-19500400-000 9318-20 x 6 664-19500600-000 665-19500600-000 9618-20 x 8 664-19500800-000 665-19500800-000 12518-20 x 10 664-19501000-000 665-19501000-000 13418-20 x 12 664-19501200-000 665-19501200-000 14818-20 x 4

20.90-21.59

664-20900400-000 665-20900400-000 9418-20 x 6 664-20900600-000 665-20900600-000 9818-20 x 8 664-20900800-000 665-20900800-000 12718-20 x 10 664-20901000-000 665-20901000-000 13618-20 x 12 664-20901200-000 665-20901200-000 150

15



CC-620


Outlet

O. D. Range

(Inches)

664Flexi-Coat®


665Stainless

Steel Flange

Approx.Weight Each


20 x 4

21.60-22.40

664-21600400-000 665-21600400-000 9420 x 6 664-21600600-000 665-21600600-000 9820 x 8 664-21600800-000 665-21600800-000 12720 x 10 664-21601000-000 665-21601000-000 13620 x 12 664-21601200-000 665-21601200-000 15020-24 x 4

23.50-24.20

664-23500400-000 665-23500400-000 9920-24 x 6 664-23500600-000 665-23500600-000 10220-24 x 8 664-23500800-000 665-23500800-000 13320-24 x 10 664-23501000-000 665-23501000-000 14220-24 x 12 664-23501200-000 665-23501200-000 15624 x 4

25.80-26.60

664-25800400-000 665-25800400-000 10524 x 6 664-25800600-000 665-25800600-000 10824 x 8 664-25800800-000 665-25800800-000 14024 x 10 664-25801000-000 665-25801000-000 14924 x 12 664-25801200-000 665-25801200-000 16424 x 4

28.30-29.00

664-28300400-000 665-28300400-000 11124 x 6 664-28300600-000 665-28300600-000 11424 x 8 664-28300800-000 665-28300800-000 14824 x 10 664-28301000-000 665-28301000-000 15724 x 12 664-28301200-000 665-28301200-000 171

16



CC-620

The Smith-Blair® Style 623and 624 Tapping Sleeves arelightweight alternatives to castmechanical joint style sleeves.

The Style 623 and 624 can befabricated to your applicationrequirement in Carbon Steel orStainless Steel.

The Style 623 and 624Tapping Sleeves utilize glandgaskets and are especially suitedfor applications where thecondition of the pipe at the taplocation will not accommodate aneck seal.

The 624 has true MJ end

seals as opposed to the 623 thatuses more of a coupling design.

For more information onSmith-Blair®’s Mechanical JointTapping Sleeve, or any otherSmith-Blair® product, contactyour local Smith-Blair® distributoror Area Territory Manager.

Test Plug : 3/4” NPT with standardsquare head

Outlet : ASTM 283 Gr. C.

Body : ASTM 283 Gr. C.

Bolts & Nuts : High strength lowalloy per AWWA C111 (ANSI A21.11).

Coating : Fusion bonded Flexi-Coat® epoxy coating per AWWAC213.

Lugs : ASTM A36

Gland :623 AISI C 1020 steel or ductile ironASTM A536 depending on size.

Gaskets : Nitrile (Buna N) ConcaveWedge Gasket compounded to resistoil, acids, alkalies, most (aliphatic)hydrocarbon fluids, water and manychemicals. Temperatures up to 180ºF.ANSI/NSF 61 Listed.

Flange: Carbon Steel. Conforms toAWWA C207 Class D ANSI drilling.Bolts straddle pipe centerline. I. D.recessed to accept standard tappingvalves. Other classes and styles areavailable on request.

Priced on Application Non-Returnable Specials

623 and 624 FabricatedMechanicalJoint Tapping Sleeve623 Certified to NSF®/ANSI 61-G

The Smith-Blair Solution

17

623 Tapping Sleeve

624 Tapping Sleeve

AB

C

D

E F

H

I

AB

C

D

EF

H

I

G

G

A

B

CD

E

F

H

I

G

624 ASTM A36 to AWWA C111dimensions.

623/624 Material Specifications

CC-620


625 Adjustable Tapping Sleeves are designedspecifically for lined and coated prestressed andnonprestressed concrete cylinder pipe. Their versatilityassures a quality controlled installation, even underadverse conditions. No welding required and stripping ofthe concrete coating is eliminated except in the area ofthe outlet.

The body of the sleeve can be mounted on the pipebefore the reinforcing wires are removed from the steelcylinder and the outlet neck inserted after the reinforcingwires are removed.

The sleeves’ concave wedge gasket seals efficiently(see Type 622). A series of studs compresses theadjustable outlet against the steel cylinder. Thisadjustment allows for the variation in the thickness of theconcrete coating.

How to Order:Our engineers will need the following information toprovide you with the proper fitting for your application:1. O.D. of steel cylinder.2. O.D. /thickness of concrete.3. Outlet size.4. Line pressure.5. Line contents.6. Any desired special coatings.7. Any special bolts (i.e. stainless steel, alloy, etc.).8. Any unusual conditions or requirements.9. Specify preference of straps or solid back.

10. Brand name of tapping valve used on 14” or largeroutlets.

Type 625 Tapping Sleeves can be made toaccommodate any size concrete cylinder

or concrete-coated steel pipe.Solid back half available upon request.

Also available in Stainless Steel

BODY: Carbon Steel ASTM 283 Gr. C.

FLANGES: AWWA C207 Class D, ANSI 150# drilling.

GASKET: Nitrile (Buna N) Concave Wedge Gasket--compounded to resist--oil, acids, alkalies, most (aliphatic) hydrocarbon fluids, water and many chemicals. Temperatures up to 180ºF. ANSI/NSF 61 Listed.

FINISH: Fusion bonded Flexi-Coat® epoxycoating per AWWA C213, coated to an average of 12 mil. thickness.

STRAPS: Carbon steel ASTM A36. Optional--type 304 stainless steel.

STUDS & NUTS: High strength low alloy steel with heavy semifinished hexagon nuts to AWWA C111 (ANSI A21.11) standards. Optional--type 304 stainless steel studs and nuts. Nuts are coated to prevent galling.

SEAL PLATE: Carbon steel ASTM 283 Gr. C/A36

GROUT PIPES: Carbon steel ASTM A53 Grade B.

GROUT SEAL: 1” square foam rubber.


18

625 Tapping Sleevefor Concrete Cylinder PipeCertified to NSF®/ANSI 61-G

Note: Carbon steel bodies withstainless steel hardware will be

furnished with carbon steel straps andwelded to stainless steel studs as

standard.

Optional 2 Flange Design

Optional 3 Flange Design

CC-620 19

MJ SeriesTapping Sleeves with Mechanical Joint Outlets

Smith-Blair, Inc. Mechanical Joint Outlet is availableon all Smith-Blair® Carbon Steel and Stainless SteelTapping Sleeve product lines.

The MJ Outlet allows the user to tap pipe, utilizing astandard MJ x MJ valve in lieu of a specialty tapping valve.This outlet allows the user to combine valve inventory to asingle valve, reduce installation time and save money.

The heavy mechanical joint flange is fixed in place tomake installation easier, while reducing the chance ofinjuries during the tapping operation.

The Smith-Blair® Mechanical Joint Outlet productextension has all the quality features expected in ourfull line of Tapping Sleeve Products.

Example:622 6” x 4” Tapping Sleeve w/alloy bolts and nuts

Standard Catalog Number MJ Outlet Number622-06900400-003 622-069004MJ-003

To order, modify the standard Smith-Blair®

Tapping Sleeve catalog number as shownbelow

665 Tapping Sleeve 623 FabricatedMechanical Joint

622 Tapping Sleeve

For information on sizes and prices, please contact Smith-Blair, Inc.

Ph: (870)773-5127 or (800)643-9705

626 Weld-On OutletSmith-Blair Weld On TappingS Sleeves and Outlets are an economical means of making taps onsteel pipe. They are available in nominal sizes 3” and up. Other configurations are available. Availablefabricated of carbon steel and 304 Stainless Steel.

626 Type 3:Top Half Tapping

Sleeve

626 Type 2:Flange, Neck and

Weld Plate

626 Type 1:Flange and Neck Only

626 Type 4:Split Body - Three Piece

Tapping Sleeve

627 Type 1:Full Body - Two Piece

Tapping Sleeve

627 Type 2:Full Body - Three Piece

Tapping Sleeve

SWP/2500 02/11

For more information:Call Smith-Blair Applications Engineering Department or your local sales representative/agent.

Smith-Blair Inc.P. O. Box 5337

Texarkana, Texas 75505800-643-9705 870-773-5127800-648-6792 870-773-5212

www.smith-blair.com

Distributed By:

Lightweight...EconomicalAvailable in Carbon Steel or Stainless Steel

Cover Studsw/Heavy Hex Nuts & FlatWashers.

3/4” Test Port

Ductile IronCompletion

plug w/Buna NO-Ring Seal.

Cover Platewith Buna N

Gasket

20

665 Tapping Sleeve

623 Mechanical Joint Tapping Sleeve 662 Tapping Sleeve

622 Tapping Sleeve

680 SeriesTapping Sleeves with Line Stop Outlets 4”-12”

Clamp, Coupling and Restraint Products CC 624-676 06/09

Tapping Sleeves

Smith-Blair’s 624 Fabricated Mechanical JointTapping Sleeve with MJ Pusher Flanges requires no spe-cial tools to complete installation.

The sleeve’s design seals 360º around the pipe, and thebody can be built to accommodate any size pipe diameter.

Since the sleeve is not made from a casting, it can normal-ly be delivered quicker than cast tapping sleeves, especially insizes 12-inch nominal and above.

Product Features: Meets AWWA C223 Standards.

No special tools required to install the sleeve.

Seals 360º around the pipe incase the pipe breaks.

Flanged outlets are recessed to accept tapping valve.

Design features are similar to cast ductile iron sleeves.

Flexi-Coat epoxy coating standard for superior corro-sion resistance.

3/4” test outlet to allow hydrostatic pressure test beforetapping the pipe.

Delivery is generally quicker because the tappingsleeve is fabricated at Smith-Blair.

Body can be built to accommodate any size pipe diam-eter, unlike cast sleeves.

Available in a wide assortment of outlet sizes andtypes to meet market needs.

Standard Pressure Ratings*150 PSI working

225 PSI test


Body: Carbon steel ASTM A283 Grade C or A36.Flange: Carbon steel per A36. Type AWWA C207 Class D, (ANSI

150# hole pattern). Recessed for tapping valve per MSS-SP 60.

Gasket: NSF 61, Nitrile (Buna-N), compounded to resist natural gas, water, oil, acids, alkalies, most (aliphatic) hydrocar-bon fluids and many chemicals. Temperature Range: -20ºF to +180ºF.

Test Plug: 3/4” carbon steel with square head.Side Bar Lugs: Carbon steel per ASTM A36.Hardware: Carbon Steel Standard. Optional: Bolts in Type 304

Stainless Steel and Nuts in Type 304 Stainless Steel with fluoropolymer coating to prevent galling.

Finish: Fusion bonded Flexi-Coat® epoxy per AWWA C213, coated to an average of 12 mil thickness.

Other material of construction and fastners materials available


624Tapping Sleeve

676Repair Sleeve

3/4” Test outlet

Recessed cavity for mating to lip on standard

tapping valves.

Flexi-Coatepoxy coating

Carbon steel side bar lugs

624 Tapping Sleeve

MJ EndFlangeGasket

MJ EndFlanges

*Other pressure ratings available upon request. Pressure ratingcan affect final cost. Please furnish working pressure.

(Cut away view)

Smith-Blairs’s 676 Mech-anical Joint Repair Sleevewith MJ End Flanges does notrequire special tools to install.

The sleeve can be built to fitany size pipe diameter. Since itis not a casting, it is the idealchoice for emergency repairson large diameter pipe.

Unlike ductile iron sleevesthat can be heavy for theinstaller, the 676 sleeve ismade out of lighter carbonsteel.

The sleeve provides a 360ºseal around the pipe as a pre-ventative incase the pipe iscompromised.

Product Features: No special tools required to install the sleeve. Seals 360º around the pipe incase the pipe is compro-

mised. Flexi-Coat epoxy coating standard for superior corro-

sion resistance. Lighter and easier to install than a comparable cast

ductile iron sleeve. Available in a wide assortment of pipe sizes and types

to meet customer requirements. Standard pressure rated 150 PSI working and 225 PSI

test. Other pressure ratings available. Delivery is generally quicker because it is fabricated at

Smith-Blair, it is great for emergency repairs on largediameter pipe.

Standard Pressure Ratings*150 PSI working

225 PSI test

676 Mechanical Joint Repair Sleeve with MJ End Flanges


Body: Carbon steel ASTM A283 Grade C or A36Lugs: Carbon Steel per ASTM A36Gasket: NSF 61, Nitrile (Buna-N), compounded to resist natu-

ral gas, water, oil, acids, alkalies, most (aliphatic) hydrocarbon fluids and many chemicals Temperature Range: -20ºF to +180ºF

Hardware: Carbon Steel Standard.Optional: Bolts in type 304 stainless steel and nuts in Type 304 stainless steel with fluoropolymer coating to prevent galling.

Finish: Flexi-Coat® Fusion bonded epoxy per AWWA C213, coated to an average of 12 mil thick.




Texarkana, TX 75505


www.smith-blair.com

Distributed by:

*Other pressure ratings available upon request. Pressure rat-ing can affect final cost. Please furnish working pressure.


Flanged Coupling Adapters & Dismantling Joints

912, 913, 914, 926, 932, 933, 971, 972, 975

Meets AWWA C219 Standards

912 Omni with Crossbolts 912 Omni

913 914

926 975

For Restraint Flanged Coupling Adapters using ‘Cam-Lock’ - see the Smith-Blair CC-911Brochure.

Flanged Coupling Adapters

2

OMNI 912-91 with Cross Bolts

Uses special cast tee bolts and cross bolts Only one wrench necessary because tee

bolts and cross bolts do not rotate

Original 912-90 OMNI (Extended Range) Uses standard, all-thread bolts Zinc plated hardware Uses standard Omni Gaskets Stainless steel hardware available Studs can be replaced without dismantling the

FCA

Smith-Blair’s Flanged Coupling Adapterscombine a flexible coupling with a flange to createa compact, flexible fitting that connects plain-endpipe to flanged fittings, meters, valves or equip-ment.

By eliminating the need for a flanged spool

and coupling, Smith Blair’s Flanged CouplingAdapters provide versatility on the job site. Inaddition, special length flanged spools can nowbe made at the job site by utilizing standard pipeand Smith-Blair’s Flanged Coupling Adapters,which come in a cast and a steel version.

Stress relieving flexibility Ease of installation and alignment Ease of equipment removal and reinstallation Quick means of cutting in valves Cost saving elimination of special fittings Dampening of pump vibration Space saving connection Neat, uncluttered installation

Flanged Coupling Adapters Provide: Treatment Plants Valve Insertions Pump Installations Tank Connections Lift Stations Meter Settings Backflow Preventers Equipment Connections

Typical Applications Include:

“O” Ring flange gasket

Corrosionresistant electro-galvanize studs

High-strengthiron follower

Compact ductile iron adapter body

facilitates installation in close space

Heavy hex electro-galvanizediron nuts

Wedge-type gasket

Standard hex electro-galvanizedcarbon steel bolts

Ductile iron teebolts

High-strengthiron follower

“O” Ring flange gasket

Wedge-type gasket

Compact ductile iron adapter body facilitates installation in close space

Low alloy nuts

Ductile iron crossbolts

Product Selection Guide

3

Product Product Type Pipe Size WorkingPressure Temperature Special Characteristics

912

Ductile Iron FlangedCoupling Adapter,Omni Extended Range

3” - 12” 250 PSI-20ºF to 180ºF

higher with special gaskets

Compact ductile iron construction

Economical

913

Steel FlangedCoupling Adapter 3” and larger

150 PSI* +according to

size and design

-20ºF to 180ºFhigher with

special gaskets

Fits water & butterfly valves Facilitates anchor assembly Available in large and non-

standard sizes Available with heavy flange

or special lengths

914

Steel ReducingFlanged CouplingAdapter

3” and larger150 PSI* +according to

size and design


special gaskets

To reduce or increase To connect flange to any

pipe size Available with heavy flange

or special lengths

926

Ductile Iron MeterCoupling 1 1/2” and 2” 175 PSI


special gaskets

To connect meter to plain-end steel, PVC or copper pipe

Compact and economical

932

Insulating Ductile IronFlanged CouplingAdapter

3” - 12” 175 PSI-20ºF to 180ºF

higher with special gaskets

Insulates cast iron and steel pipe


933

Insulating SteelFlanged CouplingAdapter

3” and larger150 PSI* +according to

size and design


special gaskets

Insulates cast iron and steel pipe


971

Fabricated SteelDismantling Joint 3” and larger


size and design


special gaskets

Non-restrained joint for flanged ductile iron or steel pipe

972



size and design


special gaskets

Full restrained for flanged ductile iron or steel pipe.

975



size and design


special gaskets

Full restrained for flanged ductile iron or steel pipe.

! WARNINGWithout anchor studs or

harness devices, these products donot restrain axial pipe movement.

*Higher pressure ratings available on application.

912 Flanged Coupling AdapterDuctile Iron (OMNI compatible gasket)Uses studs instead of cross bolts

4

Gain flexibility and compactness. Connect all types of plain end pipe to flangedequipment, meters and fittings sizes 3” thru 12” nominal. Each unit shipped complete with bolts, nuts,and gaskets making it ready to install.

Material SpecificationsBODY: Ductile Iron ASTM A536, Bolt circle, bolt size and

spacing conform to ANSI 150 lb. flange drilling.FOLLOWER: Ductile Iron ASTM A536 GASKET: Nitrile (Buna N) Certified to NSF/ANSI 61.

Compounded to produce superior storage and performance characteristics while resisting water,acids, alkalies, most (aliphatic) hydrocarbon fluidsand many other chemicals. Nominal temperature range -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.

O-RING: Nitrile.BOLTS & NUTS: Carbon steel ASTM A307 electro-galvanized with

di-chromate seal.Optional 304 stainless.

STUDS: ATSM A193 Grade B7 electro-galvanized with di-chromate seal.Optional 304 stainless.

FINISH: Flexi-Coat®, fusion bonded epoxy per AWWAC213.


E

LB

A

Anchor studs will beinstalled at the factoryon customer request only.

AnchorBoss

Anchor StudsBetween Bolts

NomSize Inches

O.D.Range Inches Catalog Number Weight

Each Lbs.Optional Anchor Studs Dimensions/Inches

Qty. *PSI A B E L

3

2.85-3.13 912-90031303-000 17 N/A N/A 3 7/8 3 7 3/4 4 9/163.44-3.62 912-90035003-000 17 2 175 3 7/8 3 7 3/4 4 9/163.80-3.96 912-90039603-000 17 2 175 3 7/8 3 7 3/4 4 9/163.97-4.14 912-90041403-000 17 2 175 3 7/8 3 7 3/4 4 9/16

4

4.00-4.15 912-90041504-000 22 N/A N/A 5 1/4 3 9 1/32 4 7/84.22-4.50 912-90045004-000 22 2 175 5 1/4 3 9 1/32 4 7/84.46-4.86 912-90048604-000 22 2 175 5 1/4 3 9 1/32 4 7/84.80-5.10 912-90051004-000 22 2 175 5 1/4 3 9 1/32 4 7/8

6

6.00-6.15 912-90061506-000 29 2 125 7 1/4 3 1/2 10 7/8 5 3/46.28-6.63 912-90066306-000 29 N/A N/A 7 1/4 3 1/2 10 7/8 5 3/46.56-6.96 912-90069606-000 29 2 175 7 1/4 3 1/2 10 7/8 5 3/46.90-7.20 912-90072006-000 29 2 175 7 1/4 3 1/2 10 7/8 5 3/4

8

8.00 912-90080008-000 40 N/A N/A 9 13/32 3 1/2 13 3/8 5 7/88.40-8.63 912-90086308-000 40 2 100 9 13/32 3 1/2 13 3/8 5 7/88.54-9.11 912-90091108-000 40 2 100 9 13/32 3 1/2 13 3/8 5 7/89.05-9.40 912-90094008-000 40 2 175 9 13/32 3 1/2 13 3/8 5 7/8

10

10.00 912-90100010-000 60 N/A N/A 11 5/8 4 15 7/8 6 3/810.50-10.75 912-90107510-000 60 4 100 11 5/8 4 15 7/8 6 3/811.10-11.60 912-90116010-000 60 4 120 11 5/8 4 15 7/8 6 3/811.65-11.88 912-90118810-000 60 N/A N/A 11 5/8 4 15 7/8 6 3/811.90-11.95 912-90119510-000 60 N/A N/A 11 5/8 4 15 7/8 6 3/8

12

12.00 912-90120012-000 80 N/A N/A 14 4 18 3/4 6 3/812.50-12.75 912-90127512-000 80 6 100 14 4 18 3/4 6 3/813.20-13.50 912-90135012-000 80 6 100 14 4 18 3/4 6 3/813.50-13.75 912-90137512-000 80 N/A N/A 14 4 18 3/4 6 3/813.90-14.20 912-90142012-000 80 N/A N/A 14 4 18 3/4 6 3/8

E

LB

A

912 Flanged Coupling AdapterOMNIUses cross bolts and tee-bolts

5

Material SpecificationsBODY: Ductile Iron ASTM A536, Bolt circle, bolt size and

spacing conform to ANSI 150 lb. flange drilling.FOLLOWER: Ductile Iron ASTM A536 GASKET: Nitrile (Buna N) Certified to NSF/ANSI 61.

Compounded to produce superior storage and performance characteristics while resisting water,acids, alkalies, most (aliphatic) hydrocarbon fluidsand many other chemicals. Nominal temperature range -20°F to 180°F.Consult manufacturer for specific applications or other service temperatures.

O-RING: NitrileTEE BOLTS: DuctileCROSS BOLTS: DuctileNUTS: Low alloyFINISH: Flexi-Coat®, fusion bonded epoxy per AWWA

C213.

Note: Stainless steel cross bolts are not available. See page 4for flanged coupling adapters with stainless steel hardware.

NomSize Inches

O.D.Range Inches Catalog Number Weight

Each Lbs.Optional Anchor Studs Dimensions/Inches

Qty. *PSI A B E L

3

2.85-3.13 912-91031303-000 17 N/A N/A 3 7/8 3 7 3/4 4 9/163.44-3.62 912.91035003-000 17 2 175 3 7/8 3 7 3/4 4 9/163.80-3.96 912-91039603-000 17 2 175 3 7/8 3 7 3/4 4 9/163.97-4.14 912-91041403-000 17 2 175 3 7/8 3 7 3/4 4 9/16

4

4.00-4.15 912-91041504-000 22 N/A N/A 5 1/4 3 9 1/32 4 7/84.22-4.50 912-91045004-000 22 2 175 5 1/4 3 9 1/32 4 7/84.46-4.86 912-91048604-000 22 2 175 5 1/4 3 9 1/32 4 7/84.80-5.10 912-91051004-000 22 2 175 5 1/4 3 9 1/32 4 7/8

6

6.00-6.15 912-91061506-000 29 2 125 7 1/4 3 1/2 10 7/8 5 3/46.28-6.63 912-91066306-000 29 N/A N/A 7 1/4 3 1/2 10 7/8 5 3/46.56-6.96 912-91069606-000 29 2 175 7 1/4 3 1/2 10 7/8 5 3/46.90-7.20 912-91072006-000 29 2 175 7 1/4 3 1/2 10 7/8 5 3/4

8

8.00 912-91080008-000 40 N/A N/A 9 13/32 3 1/2 13 3/8 5 7/88.40-8.63 912-91086308-000 40 2 100 9 13/32 3 1/2 13 3/8 5 7/88.54-9.11 912-91091108-000 40 2 100 9 13/32 3 1/2 13 3/8 5 7/89.05-9.40 912-91094008-000 40 2 175 9 13/32 3 1/2 13 3/8 5 7/8

10

10.00 912-91100010-000 60 N/A N/A 11 5/8 4 15 7/8 6 3/810.50-10.75 912-91107510-000 60 4 100 11 5/8 4 15 7/8 6 3/811.10-11.60 912-91116010-000 60 4 120 11 5/8 4 15 7/8 6 3/811.65-11.88 912-91118810-000 60 N/A N/A 11 5/8 4 15 7/8 6 3/811.90-11.95 912-91119510-000 60 N/A N/A 11 5/8 4 15 7/8 6 3/8

12

12.00 912-91120012-000 80 N/A N/A 14 4 18 3/4 6 3/812.50-12.75 912-91127512-000 80 6 100 14 4 18 3/4 6 3/813.20-13.50 912-91135012-000 80 6 100 14 4 18 3/4 6 3/813.50-13.75 912-91137512-000 80 N/A N/A 14 4 18 3/4 6 3/813.90-14.20 912-91142012-000 80 N/A N/A 14 4 18 3/4 6 3/8


Smith-Blair’s 912 OMNI Flanged CouplingAdapter with cross bolts provides the sameinstallation benefits of the old style 912 FlangedCoupling Adapter with a wider OMNI range. Thecross bolts and tee bolts also make installationeasier.

Anchor studs will beinstalled at the factoryon customer request only.

AnchorBoss

Anchor StudsBetween Bolts

912 FCA Omni Parts List

6

NominalSize

Inches

O.D.RangeInches

Follower FlangePart Number

BodyPart Number

“O” Ring FlangeGasket Number

Bolt or StudPart Number*

Cplg. GasketPart Number

Cross BoltPart Number

Tee BoltPart Number

3”

2.85-3.13 22137-045 60265-045 30019-069

(4) 905325/8 x 7

34610-069

(4) 908095/8 x 7 -

3.44-3.62 22137-045 60265-045 30019-069 33829-069

3.80-3.96 22138-045 60265-045 30019-069 33830-069

3.97-4.14 22138-045 60265-045 30019-069 33831-069

4”

3.96-4.15 22139-045 60266-045 30023-069 (4) 903645/8 x 3

33809-069

(4) 908095/8 x 7

(4) 908125/8 x 3

4.22-4.50 22139-045 60266-045 30023-069 33810-069

4.46-4.86 22575-045 60266-045 30023-069 (4) 905325/8 x 7

34578-069

4.80-5.10 22140-045 60266-045 30023-069 33811-069

6”

6.00-6.15 22141-045 60267-045 30024-069 (4) 905363/4 x 3 1/4

33801-069

(4) 908103/4 x 8

(4) 908133/4 x 3 1/4

6.28-6.63 22141-045 60267-045 30024-069 33802-069

6.56-6.96 22576-045 60267-045 30024-069 (4) 905333/4 x 8

34579-069

6.90-7.20 22142-045 60267-045 30024-069 33803-069

8”

8.00-8.16 22144-045 60268-045 30025-069 (4) 905363/4 x 3 1/4

33805-069

(4) 908103/4 x 8

(4) 908133/4 x 3 1/4

8.40-8.63 22144-045 60268-045 30025-069 33806-069

8.54-9.11 22577-045 60268-045 30025-069 (4) 905333/4 x 8

34580-069

9.05-9.40 22145-045 60268-045 30025-069 33846-069

10”

10.00 22147-045 60269-045 30026-069 (6) 905377/8 x 3 3/4

33860-069

(6) 908117/8 x 9

(6) 908147/8 x 3 3/4

10.50-10.75 22147-045 60269-045 30026-069 33813-069

11.10-11.60 22148-045 60269-045 30026-069(6) 90534

7/8 x 9

33814-069

11.65-11.88 22149-045 60269-045 30026-069 33815-069

11.90-11.95 22149-045 60269-045 30026-069 33816-069

12”

12.00 22150-045 60270-045 30027-069 (6) 905377/8 x 3 3/4

33859-069

(6) 908117/8 x 9

(6) 908147/8 x 3 3/4

12.50-12.75 22150-045 60270-045 30027-069 33817-069

13.20-13.50 22151-045 60270-045 30027-069(6) 60534

7/8 x 9

33820-069

13.51-13.75 22151-045 60270-045 30027-069 33821-069

13.90-14.20 22152-045 60270-045 30027-069 33818-069

NominalSize Inches Size Inches +Nut

Electro-Galvanized+Nut

Stainless Steel+Nut

Low Alloy

3” - 4” 5/8 100025-001 100025-202 100025-005

6” - 8” 3/4 100032-001 100032-202 100032-00510” - 12” 7/8 100072-001 100072-202 100072-005

912 Omni Nuts

912 Omni Parts

*Note: + 1 nut required for flange and tee bolts+3 nuts required for studs

+2 nuts required for cross bolts

913 Flanged Coupling AdapterSteel

7

Fabricated steel flanged coupling adapters are ideal for connecting butterfly or wafer valves and installations involving harness assemblies.

Larger sizes, heavy flanges or special laying lengths are available.

Material SpecificationsBODY: Steel ASTM A53, ASTM A283 Gr. C or carbon steel

having a minimum yield of 30,000 PSIFLANGE: 3” thru 5” sizes

ANSI 150 lb. flat face. 6” and above AWWA C207 Class D, ANSI 150 lb drilling.

FOLLOWER: 3” thru 12” sizes--Ductile iron ASTM A536. 14” and above; heavy rolled steel AISI C1020

GASKET: Nitrile (Buna N) Certified to NSF/ANSI 61. Compounded to produce superior storage and per-formance characteristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and manyother chemicals. Nominal temperature range from -20°F to +180°F. Consult manufacturer for specific applications or other service temperatures.

BOLTS & NUTS: High strength low alloy steel with heavy semi-finished hexagon nuts to AWWA C-111 (ANSI-A21.11)standards.

FINISH: Flexi-Coat®, fusion bonded epoxy per AWWA C213.


NomSize

Inches

O.D. RangeInches

Nom.Flange

Size InchesCatalog Number

WeightEachLbs.

OptionalAnchor Studs Dimensions/Inches

Qty. *PSI A B E L3 3.44-3.56 3 913-03500300-003 18 2 275 .203 7 11/16 8 1/2 9

43.94-4.06 4 913-04000400-003 24 2 275 .203 7 11/16 9 94.44-4.56 4 913-04500400-003 24 2 275 .203 7 11/16 9 94.74-4.86 4 913-04800400-003 24 2 275 1/4 7 11/16 9 3/4 9

5 5.49-5.62 5 913-05560500-003 27 2 250 1/4 10 11/16 10 1/4 12

65.94-6.06 6 913-06000600-003 36 2 210 1/4 10 11/16 11 5/8 126.57-6.69 6 913-06630600-003 38 2 175 1/4 10 11/16 11 5/8 126.84-6.96 6 913-06900600-003 37 2 175 1/4 10 11/16 11 5/8 12

87.94-8.06 8 913-08000800-003 49 4 240 1/4 10 11/16 13 5/8 128.57-8.70 8 913-08630800-003 49 4 206 1/4 10 11/16 13 5/8 128.99-9.10 8 913-09050800-003 52 4 187 1/4 10 11/16 14 12

109.94-10.06 10 913-10001000-003 60 4 175 1/4 10 11/16 14 3/4 12

10.69-10.81 10 913-10751000-003 61 4 175 1/4** 10 11/16 15 1/2 1211.00-11.25 10 913-11101000-003 62 4 175 1/4** 10 11/16 16 12

1211.94-12.06 12 913-12001200-003 74 4 175 1/4** 10 13/16 16 3/4 12 1/812.63-12.84 12 913-12751200-003 78 4 175 1/4** 10 13/16 17 1/2 12 1/813.08-13.29 12 913-13201200-003 82 4 172 1/4** 10 13/16 18 1/8 12 1/4

1413.88-14.09 14 913-14001400-003 112

NOTE:For higher

pressures orsizes larger

than 12”, contact

Smith-Blair, Inc.

1/4 10 15/16 18 7/8 12 1/415.18-15.39 14 913-15301400-003 116 1/4 10 15/16 20 1/8 12 1/415.51-15.74 14 913-15651400-003 120 1/4 10 15/16 20 1/2 12 1/4

1615.88-16.09 16 913-16001600-003 130 1/4 11 20 7/8 12 3/817.28-17.49 16 913-17401600-003 135 1/4 11 22 1/4 12 3/817.68-17.89 16 913-17801600-003 139 1/4 11 22 5/8 12 3/8

1817.88-18.09 18 913-18001800-003 140 1/4 11 1/16 22 7/8 12 1/219.38-19.59 18 913-19501800-003 146 1/4 11 1/16 24 3/8 12 1/219.80-20.01 18 913-19921800-003 152 1/4 11 1/16 24 7/8 12 1/2

2019.88-20.09 20 913-20002000-003 160 1/4 11 1/8 24 7/8 12 1/221.48-21.69 20 913-21602000-003 155 1/4 11 1/8 26 1/2 12 5/821.94-22.15 20 913-22062000-003 154 1/4 11 1/8 27 12 5/8

2423.88-24.09 24 913-24002400-003 197 1/4 11 1/4 28 7/8 12 3/425.68-25.89 24 913-25802400-003 204 1/4 11 1/4 30 5/8 12 3/426.20-26.41 24 913-26322400-003 207 1/4 11 1/4 31 1/8 12 1/4

StandardFlangeBore

A

LB

E

Anchor Studs*Between Bolts

AnchorBoss

*Pipe must be drilled in order to use anchor studs.

See CC911 brochure for Cam-Lock Restraint Flanged Coupling Adapters.

914 Reducing Flange Coupling AdapterSteel

8

Fabricated steel flanged coupling adapters enableflanges of all sizes to be quickly and easily connected to all sizes and types of pipe.

Adapters for larger flange or pipe sizes than listed are available.

Material SpecificationsBODY: Steel ASTM A53, ASTM A283 Gr. C or carbon steel

having a minimum yield of 30,000 PSIFLANGE: 3” thru 5” sizes

ANSI 150 lb. flat face. 6” and above AWWA C207 Class D, ANSI 150 lb drilling.

FOLLOWER: 3” thru 12” sizes--Ductile iron ASTM A536. 14” and above; heavy rolled steel AISI C1020

GASKET: Nitrile (Buna N) Certified to NSF/ANSI 61. Compounded to produce superior storage and per-formance charac-teristics while resisting water, acids, alkalies, most (aliphatic) hydrocarbon fluids and manyother chemicals. Nominal temperature range from -20°F to +180°F. Consult manufacturer for specific applications or other service temperatures.

BOLTS & NUTS: High strength low alloy steel with heavy semi-finished hexagon nuts to AWWA C-111 (ANSI-A21.11)standards.

FINISH: Flexi-Coat®, fusion bonded epoxy per AWWA C213.Material specifications subject to change.

Coupling End Only "Y" Flanged End Only "X"O.D. Range Inches Catalog Code Weight Each Lbs. Flange Size Inches Catalog Code Weight Each Lbs.

3.44-3.56 914-0350 16 3 03 123.90-4.06 914-0396 16 4 04 174.44-4.56 914-0450 17 5 05 214.74-4.86 914-0480 18 6 06 184.94-5.06 914-0500 23 8 08 265.04-5.16 914-0510 23 10 10 275.49-5.62 914-0556 23 12 12 405.94-6.06 914-0600 29 14 14 536.57-6.69 914-0663 29 16 16 636.84-6.96 914-0690 29 18 18 657.04-7.17 914-0710 29 20 20 787.94-8.06 914-0800 30 22 22 848.57-8.70 914-0863 37 24 24 1008.99-9.10 914-0905 389.24-9.36 914-0930 39

9.94-10.06 914-1000 4310.69-10.81 914-1075 4611.04-11.16 914-1110 4911.34-11.46 914-1140 5011.94-12.06 914-1200 5212.63-12.84 914-1275 5613.08-13.29 914-1320 5713.88-14.09 914-1400 7015.18-15.39 914-1530 7815.53-15.74 914-1565 8015.88-16.09 914-1600 8217.28-17.49 914-1740 9117.68-17.89 914-1780 9317.88-18.09 914-1800 9319.38-19.59 914-1950 10519.80-20.01 914-1992 10819.88-20.09 914-2000 10821.48-21.69 914-2160 11921.88-22.09 914-2200 12121.94-22.15 914-2206 12123.88-24.09 914-2400 14325.68-25.89 914-2580 15526.20-26.41 914-2632 15929.88-30.09 914-3000 19031.88-32.09 914-3200 207

How to OrderExample: You require a flanged coupling adapter to connect12” steel pipe to an 8” flanged fitting.

1. Determine the Code Number The 12”-12.75” O.D. pipe would fit the O.D. range

12.63-12.84. The code number for the O.D. range is 914-1275. The 8” flanged end has the code number 08. Combine the two code numbers and add 003 to the

end (-003 represents our standard Flexi-Coat finish, alloy bolts and nuts and grade NSF Buna N gasket).

Final catalog number is: 914-127508-003.

2. Determine shipping weight914-1275 = 56 lbs.

08 = 26 lbs.Total Weight = 82 lbs.

Large sizes and sizes to fit O.D. ranges not listed are available upon request.

Reductions of more than three nominal pipe sizes require special pricing.

Bolts, nuts and gasket for flange end not supplied. Suitableanchorage must be provided when excessive pipe movementcould occur.

FlangedEnd

X

CoupledEnd

Y

7 1/2” 6 1/2”5 3/8”

926 Flexible Meter Coupling

9

932 Insulating Flanged Coupling AdapterDuctile Iron

933 Insulating Flanged Coupling AdapterSteel

Simple, quick installation of 1 1/2” and 2” flanged meters.

Meter coupling eliminates pipe threading and need of precise cutting or alignment of pipe.

Material SpecificationsFLANGED BODYAND FOLLOWER: Ductile Iron ASTM A536GASKET: Nitrile (Buna-N)O-RING: NitrileBOLTS & NUTS: High strength, low alloy bolts.FINISH: Flexi-Coat®, fusion bonded epoxy

per AWWA C213.Material specifications subject to change.

Flanged MeterOutlet Size

Inches

ServiceSize Inches Catalog

NumberWeight

Each Lbs.LengthFlange

O.D. ofFlange Body Thickness Length

Bolts

Nom. SizeInches

PipeO.D. Inches Qty. Size

1 1/2 1 1/2 I.P. 1.90 926-000190-000 5 3 1/2 3 3/4 7/16 1 3/4 2 5/8 x 52 2 CO P.T. 2.12 926-000213-000 6 3 1/2 4 1/4 7/16 1 3/4 2 5/8 x 5

2 2 I.P.2 C.I.

2.37-2.50 926-000250-000 6 3 1/2 4 1/4 7/16 1 3/4 2 5/8 x5

Insulates steel and cast iron pipe from flanged fittings 3” through 12” sizes.

Combines a special grade 60, boot style insulating gasket with our 912 cast F.C.A.

How to Order Detail the type and the O.D. of the pipe the insulating cast F.C.A. is to fit. The nominalpipe size and the flange size will be the same.Example: A 932 insulating, cast F.C.A. is required to connect a 12” standard steel pipe(12.75” O.D.) to a 12” ANSI 150 lb. flanged fitting.

Suitable anchorage must be provided when excessive pipe movement could occur.

Total Angular Deflection Per Joint

For Pipe O.D. Ranges Sleeve Length5" 7" 10"

0.84" - 2.38"2.50" - 13.50" 2° 2 1/4° 2 1/4°

13.60" - 24.00"24.10" - 36.00" 1° 1 1/2° 2°

36.10" - 42.00"42.10" - 60.00" n/a n/a 1 1/2°

60.10" - 80.00"80.10" - 100.00" n/a n/a 1°

Insulates steel and cast iron pipe from flanged fittings 3” and larger.

Combines a special grade 60, boot style insulating gasket with our 913 steel F.C.A.

How to Order Detail the type and the O.D. of the pipe for which the

insulating, steel F.C.A. is to fit. The nominal pipe size and flange size will be the same.

Example: A 933 insulating, steel F.C.A. is required to connect a 24” ductile iron pipe (25.80” O.D.) to a 24” ANSI 150 lb. flanged fitting.

Maximum recommended deflection for laying FCA’s on initial installations. Someslightly greater angular deflection can be obtained, but is not recommended fordesign purposes. Meets or exceeds AWWA C-219.

(WARNING: This product does not restrain axial pipe movement.

(WARNING: This product does not restrain axial pipe movement.

Dismantling Joints971, 972 and 975

10

Dismantling Joints provide adjustability to equip-ment installations by combining a Flanged Coupling Adapter and a Flanged Spigot into one assembly.

Dismantling Joint applications include valve, pump,meter and other flanged fitting installations.

Longitudinal adjustment is provided by the telescop-ing action of the Spigot inside the Flanged CouplingAdapter.

When final installation position is achieved, the bolt-ing procedure for the Flanged Coupling Adapter andthe Flanged Spigot can be completed.

DISMANTLING JOINT SIZE RANGE:

2” and larger. Standard flanges in accordancewith AWWA Class D. Other drillings are avail-able, including Metric Flanges.

Working Pressure: 150 PSI+ (according todesign)

See Material Specifications on page 11

Non-restrained jointfor flanged ductileiron or steel pipe.

MODEL 971

Restrained joint forflanged ductile iron

or steel pipe.

MODEL 975Heavy-duty,

restrained joint for flanged ductileiron or steel pipe.

MODEL 972

NominalSize Inches

NominalLength Inches

MinimumLength Inches

MaximumLength Inches

Flange ODInches Catalog Number No. of Tie

BarsDia. X length ofTie Bars Inches

3 9.00 8.00 10.00 7.50 975-03000300-003 2 5/8 x 144 9.00 8.00 10.00 9.00 975-04000400-003 2 5/8 x 146 9.00 8.00 10.00 11.00 975-06000600-003 2 3/4 x 168 9.00 8.00 10.00 13.50 975-08000800-003 2 3/4 x 16

10 10.00 9.00 11.00 16.00 975-10001000-003 4 7/8 x 1812 10.00 9.00 11.00 19.00 975-12001200-003 4 7/8 x 1814 12.00 11.00 13.00 21.00 975-14001400-003 4 1 x 2416 12.00 11.00 13.00 23.50 975-16001600-003 4 1 x 2418 12.00 11.00 13.00 25.00 975-18001800-003 4 1 1/8 x 2020 12.00 11.00 13.00 27.50 975-20002000-003 4 1 1/8 x 2024 12.00 11.00 13.00 32.00 975-24002400-003 4 1 1/4 x 2530 12.00 11.00 13.00 38.75 975-30003000-003 7 1 1/4 x 2536 12.00 11.00 13.00 46.00 975-36003600-003 8 1 1/2 x 2442 12.00 11.00 13.00 53.00 975-42004200-003 9 1 1/2 x 2648 13.00 12.00 14.00 59.50 975-48004802-003 11 1 1/2 x 2654 13.00 12.00 14.00 66.25 975-54005402-003 11 1 3/4x 2660 16.00 15.00 17.00 73.00 975-60006002-003 13 1 3/4 x 3366 18.00 17.00 19.00 80.00 975-66006602-003 13 1 3/4 x 3072 18.00 17.00 19.00 86.50 975-72007202-003 15 1 3/4 x 33

Dismantling Joints971, 972 and 975

11

Helpful Hints

Material SpecificationsFLANGEDADAPTER BODY: ASTM A53, ASTM A283 Gr. C or carbon steel having a minimum

yield of 30,000 PSIFOLLOWERFLANGE: Ductile iron per ASTM A536, steel section per ASTM

A576GR1020HR, or carbon steel having a minimum yield of 30,000 PSI

GASKET: Nitrile (Buna-N) is standard. Certified to NSF/ANSI 61.FLANGE: Per AWWA C207SPIGOT: ASTM A53, ASTM A512 or carbon steel having a minimum yield of

30,000 PSISTUDS: ASTM A325 or A307TIE RODS: ASTM A 193 GR B7COATING: Flexi-Coat®, fusion bonded epoxy per AWWA C213.

Other materials and flanges are available upon request.Material specifications subject to change.

Sealing SurfaceFor a distance of 10 inches (250 mm) from the end of

the pipe, the pipe shall be sufficiently free from flat spots,indentations, projections, roll marks or pits to provide asmooth surface for the coupling gasket to seal against tomake a leak-proof joint.

Pipe Ends10 3/4 inch (273 mm) and smaller: Plain end pipe shall

not be more than 1/64 inch (.4 mm) smaller than the speci-fied outside diameter for a distance of 10 inches (250 mm)from the end of the pipe and shall permit passage over theend, for a distance of 10 inches (250 mm), of a ring gaugewhich has a bore 1/16 inch (1.6 mm) larger than the speci-fied outside diameter of the pipe.

12-3/4 inch (324 mm) to 20 inch (500 mm), inclusive:Plain end pipe shall not be more than 1/32 inch (.8 mm)smaller than the specified outside diameter for a distance of10 inches (250 mm) from the end of the pipe and shall per-mit passage over the end, for a distance of 10 inches (250mm), of a ring gauge which has a bore 3/32 (2.4 mm) larg-er than the specified outside diameter of the pipe.

22 inch (550mm) and larger: Plain end pipe shall not bemore than 1/32 inch (.8 mm) smaller nor more than 1/32inch (.8 mm) larger than the specified outside diameter for adistance of 10 inches (250 mm) from the end of the pipe, asmeasured with a diameter tape.

The minimum outside pipe diameter shall be deter-mined by circumferentially applying a steel diameter tape tothe pipe.

Tolerances and Dimensions of Plain-End Steel Pipe for use with Smith-Blair Flanged Coupling Adapters

Sealing SurfaceFor a distance of 10 inches (250mm) from the end, the

pipe shall be sufficiently free from flat spots, pits or indenta-tions to provide a smooth round surface for the couplinggasket to seal against to make a leak-proof joint.

Pipe EndThe pipe ends shall be furnished with smooth, round

plain ends for bolted compression couplings in compliance

with AWWA (American Water Works Association) specifica-tions governing tolerances.

Outside diameter for each size shall not exceed the fol-lowing variation:

1/2”/12mm - 16”/400mm -- ± .06”/1.5mm> 16”/400mm - 24”/600mm -- ± .08”/2.0mm > 24”/600mm - 42”/1060mm -- ± .10”/2.5mm> 42”/1060mm -- ± .12”/--0.06”

Maximum outside diameter shall permit the passage for a

Tolerances and Dimensions of Plain-End Cast Iron Pipe for use with Smith-Blair Flanged Coupling Adapters

CONTINUED ON PAGE 12

Helpful Hints & Warranty Information

12

distance of 10 inches(250mm) from the end of the pipe of aring gauge having a bore .01” (.25mm) larger than the maxi-mum allowable outside diameter.

Minimum outside diameter shall be determined by cir-cumferentially measuring with a steel diameter tape for a dis-tance of 10 inches (250mm) from the end of the pipe.

Pipe CoatingsPipe coatings of insufficient strength to resist the sealing

pressure of the coupling gasket and coatings sufficientlyporous to permit the line contents to seep through the coat-ing must be held back from the end of the pipe for distanceof 10 inches (250mm) to provide an impermeable surface forthe coupling gasket to seal against.

Helpful Hints continued from page 11

To insure the product furnished is the most suitable onefor the intended application, the following information isrequired when placing an order or requesting a quotation:

1. Name of product Example: Smith-Blair® steel flanged coupling adapter

2. Product type (if known) Example: Smith-Blair® 913. Furnish complete catalog number, if known.

3. Type of pipe: cast iron, steel, asbestos cement, etc.a. If steel, provide wall thickness and pipe O.D.b. If cast iron, provide class and pipe O.D.c. If asbestos cement, provide class; whether

machined end, milled section or rough barrel; and pipe O.D.

d. Other pipe, give complete description including mate-rial of manufacturer, wall thickness, pressure rating, etc. and pipe O.D.

4. Nominal size and exact diameter of pipe5. Line contents

Water, raw water, sewage, salt water, oil, gasoline, chem-icals, etc.

6. Line pressureOperating pressure and test pressure.

7. Pertinent environmental dataAggressive soil, marshland, etc.

8. Type of pipelineBuried or above ground, plant piping, bridge crossing, etc.

9. Special coating or material requirements 10. Quantity desired

Information Required to Place an Order or Obtain a Quote

Standard products as listed in Smith-Blair®’ s Clamp sand Couplings price book, when intended for normalapplication and service, may be ordered simply by sup-plying the catalog number and quantity.

Although Smith-Blair® has employed every effort topresent accurate information, the technical performancedata, installation recommendations and specifications inthis catalog are presented merely as a guide. Each appli-cation must be evaluated relative to its own “special condi-tions” and should be reviewed by a qualified engineer toverify that the stated pressures, temperatures, and otherperformance data are applicable.

Anyone making use of this information assumes all lia-bilities from such use. Changes to the design or misappli-cations of Smith-Blair® products without its consent orapproval are strictly prohibited. Smith-Blair® assumes norisk or liability of its products which are altered by the cus-tomer or used in a manner other than those described inthe applications literature.

WARRANTY: Smith-Blair® warrants its products only against defects

in materials and workmanship. Smith-Blair®’s liability andcustomer’s exclusive remedy under this warranty or anywarranty extends for a perioud of one (1) year from thedate of Smith-Blair®’s shipment and is expressly limited torepayment of the purchase price, repair, or replacement, atSmith-Blair®’s option, during said period, upon proof satis-factory to Smith-Blair® and upon customer’s returning andprepaying all charges on such products to factory or ware-house designated by Smith-Blair®.

This warranty is made expressly in lieu of all other war-ranties, expressed, implied or statutory, with respect toquality, merchantability or fitness for a particular purpose.



Texarkana, TX 75505


www.smith-blair.com

SWP/2500/0909

Material SpecificationsBODY: Steel ASTM 513 or carbon steel having a minimum

yield of 30,000 PSI.FLANGE: AWWA C207 Class D.FOLLOWER: Steel: Hot Rolled - AISI C-1008 to 1010 - ASTM

A-569.GASKETS: SBR or Nitrile (Buna N).

Resistance to Carbon Dioxide, Water, U.V., Ozone Water.

GRIPPING BAND: 1. IPS and DI: Steel-AISI C-1010 ERW-ASTM A513.PRESSURE RING: 1. IPS and DI: Hot Rolled - AISI C-1010-ASTM A569.BOLTS & NUTS: High strength low alloy steel with heavy semi-

finished hexagon nuts to AWWA C-111 (ANSI-A21.11) standards.

FINISH: Flexi-Coat, fusion bonded epoxy per AWWA C213.


Clamp, Coupling and Restraint Products CC-EZWFCA 05/10

EZ-W RestrainedFlanged Coupling Adapters

Nom.Pipe

Size (In.)

PipeO.D. Catalog Number

M. RingThickness& Length

No.Bolts

SizeBolts

Cplg.Weight

2” 2.375 EZ28A7WFA .156 x 7 3 5/8 x 6 23

3” 3.500 EZ38A7WFA .188 x 7 4 5/8 x 6 33

4” 4.500 EZ48A7WFA .188 x 7 4 5/8 x 6 40

4” 4.800 EZ488A7WFA .188 x 7 4 5/8 x 6 40

6” 6.625 EZ68A7WFA .250 x 7 6 5/8 x 6 63

6” 6.900 EZ698A7WFA .250 x 7 6 5/8 x 6 63

8” 8.625 EZ88A7WFA .250 x 7 8 5/8 x 6 89

8” 9.050 EZ908A7WFA .250 x 7 8 5/8 x 6 89

10” 10.750 EZ108A7WFA .250 x 7 12 5/8 x 8 125

12” 12.750 EZ128A7WFA .250 x 7 12 5/8 x 8 162

Smith-Blair, Inc., 30 Globe Ave., Texarkana, AR, 71854 • PO Box 5337, Texarkana, TX 75501 71854 Phone: 870-773-5127 • 800-643-9705 • FAX 870-773-5211 • 800-648-6792 • www.smith-blair.com

Smith-Blair’s EZ-W Restrained Flanged Coupl-ing Adapters are ideal for connecting and restrainingmost types of flange fittings to IPS and DI sizes, HDPE,PVC or steel pipe. An appropriate sized stiffener isrequired when using this product on plastic pipe.

Because the EZ-Flanged Coupling Adapter is fabri-cated, a variety of flange sizes and types are available.

Available in IPS and DI pipe sizes 2" - 12" Special laying lengths available Stab fit means no disassembly of the coupling end is

required to install No special tools required Flexi-Coat fusion bonded epoxy coating

Features:

EZ-W RestraintCouplings

for Water & Industrial Service

Clamp and Coupling Products CC-EZW 02/11

Universal ApplicationMaxi-Grip EZ is designed to seal and gripindependently in applications on anchoredor abutted steel, plastic and ductileiron pipe.

Inventory ReductionOn most types of pipe, Maxi-Grip EZremoves the need to bother with transitionfittings, welding, fusion, blocking, shopfabrication and harnessing.

Proven DesignMaxi-Grip EZ’s design incorporates innovative features to simplify installation with a design based on field-proven sealingand gripping principles.

Product Features

To connect IPS PE to steel pipes 1” through 12”diameters and ductile iron to IPS PE, PVC or steelpipe, 2” thru 8”, DI to DI size 4”, 6” and 8”.Minimum SDR 21.

Note:8” oversize ductile iron sizes will use Smith-Blair

U-Series couplings. Where pipe pullout will not occur, Smith-Blair

411, 441, 442, 461, or 462 seal only couplingscan be used.

Stiffener required for HDPE and PVC pipe.

Smith-Blair EZ Restraint Couplings for waterservice are designed with push on gaskets. Theyare engineered to simplify installation, restrain thepipe joint and ensure a tight seal.

Application

Pressure RatingsSteel 300 PSIPE/PVC 200 PSIDuctile Iron 150 PSI

Material SpecificationsSLEEVE: Steel ASTM 513 or carbon steel having a minimum

yield of 30,000 PSI.FOLLOWERS: Steel: Hot Rolled - AISI C-1008 to 1010 - ASTM

A-569 or ductile iron per ASTM A536.GASKETS: SBR or Nitrile (Buna N).

Resistance to Carbon Dioxide, Water, U.V., Ozone Water.

GRIPPING BAND: IPS and DI: Steel-AISI C-1010 ERW-ASTM A513.PRESSURE RING: IPS and DI: Hot Rolled - AISI C-1010-ASTM A569.BOLTS & NUTS: High strength low alloy steel with heavy semi-

finished hexagon nuts to AWWA C-111 (ANSI-A21.11) standards.

FINISH: Flexi-Coat, fusion bonded epoxy per AWWA C213.


¤Ductile/cast iron sizes are not to be used on ductile/cast iron size PE or PVC.All PE and PVC pipe require appropriate stiffener. Stainless steel stiffeners are recommended for water and wastewater applications.

Maxi-Grip™ EZ® Seal and Restraint CouplingIPS Steel and PVC, PE Pipe, SBR Gasket

Straight

Reducing

PIPECatalog Number

M. RING BOLTS Cplg.Wt.Nom.

Size (In.)O.D.(In.)

Thickness& Length No. Size

1* 1.320 EZ08A6WMG .134x6 3 1/2x9 81-1/4 1.660 EZ18A7WMG .134x6 3 1/2x9 9

2 2.375 EZ28A7WMG .156x7 3 5/8x12 123 3.500 EZ38A7WMG .188x7 4 5/8x12 184 4.500 EZ48A7WMG .188x7 4 5/8x12 224 4.800 EZ488A7WMG6 6.625 EZ68A7WMG .250x7 6 5/8x12 346 6.900 EZ6908A7WMG8 8.625 EZ88A7WMG .250x7 6 5/8x12 588 9.050 EZ908A7WMG

10 10.750 EZ1008A10WMG .250x10 12 5/8x15.75 13612 12.750 EZ1208A10WMG .250x10 12 5/8x15.75 150

PIPECatalog Number


Size (In.)O.D.(In.)


2 to 1-1/4 2.375 - 1.660 EZ218A7WMG .156x7 3 5/8x12 113 to 2 3.500 - 2.375 EZ328A7WMG .156x7 4 5/8x12 174 to 2 4.500 - 2.375 EZ428A7WMG .156x7 4 5/8x12 224 to 3 4.500 - 3.500 EZ438A7WMG .156x7 4 5/8x12 226 to 4 6.625 - 4.500 EZ648A7WMG .188x7 6 5/8x12 358 to 6 8.625 - 6.625 EZ868A7WMG .250x7 6 5/8x12 60

10 to 8 10.750 - 8.635 EZ1088A12WMG .250x12 12 & 8 5/8x 9 & 5 13212 to 10 12.750 - 10.750 EZ12108A12WMG .250x12 12 5/8x19.75 156

*One inch pipe size is for steel pipe only.

PIPECatalog Number


Size (In.)O.D.(In.)


4 to 2 4.80 - 2.38 EZ48239A7WMG .156x7 4 5/8x13.5 234 to 3 4.80 - 3.50 EZ48359A7WMG .188x7 4 5/8x13.5 234 to 4 4.80 - 4.50 EZ48459A7WMG .188x7 4 5/8x13.5 236 to 4 6.90 - 4.50 EZ69459A7WMG .188x7 6 5/8x13.5 506 to 6 6.90 - 6.63 EZ69669A7WMG .250x7 6 5/8x13.5 43

6(OS) to 4 7.10 - 4.50 EZ71459A7WMG .188x7 6 5/8x13.5 506 (OS) to 6 7.10 - 6.63 EZ71669A7WMG .250x7 6 5/8x13.5 43

8 to 6 9.05 - 6.63 EZ90669A7WMG .250x7 8 5/8x12 628 to 8 9.05 - 8.63 EZ90869A7WMG .250x7 8 5/8x12 56

8(OS) to 6 9.30 - 6.63 U93669A7WMG .250x7 6 5/8x13.5 628(OS) to 8 9.30 - 8.63 U93869A7WMG .250x7 6 5/8x13.5 56

Maxi-Grip™ EZ® Seal and Restraint CouplingInsulating on Cast Iron EndDuctile Iron Reducing to IPS Steel PE or PVC Pipe¤

AddressSmith-Blair, Inc.


Mailing AddressSmith-Blair, Inc.


Inside Sales:Ph: (800) 643-9705 • (870) 773-5127Fax: (800) 648-6792 • (870) 773-5212

Website: www.smith-blair.com

SWP/0211/1000

CouplingProduct

Product Type(Catalog Brochure) Application Pipe DR For Nominal

Pipe SizesWorking

Pressure**

411***†

Steel coupling (CC 411)

Joining plain-end pipe withsame

outside diameter7.3-32.5 2-36

150 PSI +accordingto design

413***†

Steel transition coupling(CC 411)

Joining pipe of differentoutside diameters 7.3-32.5 2-36


415***†

Steel reducing coupling(CC 411)

Joining pipe of differentoutside diameters 7.3-32.5 2-36 150 PSI

441***†

Cast coupling (OMNI)

Joining pipe of same or different outside diameters

7.3-32.5 2-16 250 PSI

442***†

Cast coupling (OMNI)


7.3-32.5 4-16 250 PSI

611

Steel expansion joint coupling, flanged end(CC-611)

Absorbingconcentrated pipe

movement7.3-32.5 2-36


612

Steel double-end expansion joint, flangedend (CC-611)

Absorbingconcentrated pipe

movement7.3-32.5 2-36


Restrained flanged coupling adapter(CC-EZWFCA)

Joining plain-end pipe to flanged valves

and fittings7.3-32.5 2-12


913***†

Steel flanged coupling adapter(CC-900)




914***†

Steel reducing flanged coupling adapter(CC-900)




461***†Quantum coupling (CC-460)


7.3-32.5 2-12 250 PSI

EZ***

Maxi-Grip EZ seal and restraint couplingPipe IPS to IPS IPS to CI*

Joining plain-end pipe 7.3-211 1/4-12 IPS

2-8 CIReducing only

150 PSI

C

Pipe StiffenersI.D. of pipe required. Pipe stiffener All All N/A

*** All coupling and pipe joining products require properly sized pipe stiffeners.† These products do not restrain axial pipe movement. Suitable anchorage must be provided where pipe movement could cause the

pipe to move out of the coupling.** Actual working pressure will vary depending on pipe wall thickness. Consult Smith-Blair for specific applications.* These products should not be used on CI size HDPE pipe.

High Density Polyethylene pipe (HDPE) is different from other types of pipe. Smith-Blair products will provide satisfactory performance when appliedas recommended, but the following characteristics must be considered when selecting clamp and coupling products for use on HDPE pipe: Thermal expansion and contraction are greater, while yield strength and rigidity are lower. HDPE has a tendency to cold-flow over time when subjected to a constant load. The surface finish of HDPE pipe has a low frictional coefficient and the pipe ends toe-in after being cut.

Clamp, Coupling and Restraint Products CC-HDPE 07/10

Products for High Density

Polyethylene Pipe (Water Applications)

EZ-W FCA***

TappingProduct Product Type Application Pipe DR For Nominal

Pipe Sizes****Working

Pressure***

371

All stainless steel single bolt servicesaddle with stainless steel spring washers Service Tap

Outlet Sizes1/2 thru 2

7.3-17 4-12 Up to 150 PSI

372

All stainless steel double bolt servicesaddle with stainless steel spring washers

397

Ductile iron body with Flexi- Coat™ epoxycoating and stainless steel straps withstainless steel spring washers

Service TapOutlet Sizes

3/4 thru 2 1/2 7.3-17 4-12 Up to 150 PSI

317

Double strap saddle with Flexi- Coat™epoxy coating and wide stainless steelstraps with stainless steel spring washers

Service TapOutlet Sizes

5/8 thru 2 1/27.3-17 4-16 Up to 150 PSI

RepairProduct Product Type Application** Pipe DR For Nominal

Pipe Sizes****Working

Pressure***

226

Full Circle clamp with stainless steelspring washers Splits and holes in pipe 7.3-11

7.3-172-3.50

4.00-14.00 Up to 255 PSI

227

Super Range Full Circle clamp couplingwith stainless steel spring washers Splits and holes in pipe 7.3-11 4-14 Up to 175 PSI

238

Tapped Full Circle clamp coupling withstainless steel spring washers Leaks at service outlet 7.3-17 3-12 Up to 255 PSI

Super Range Full Circle clamp couplingwith stainless steel spring washers Leaks at service outlet 7.3-11 4-14 Up to 175 PSI

244/247

Full Circle Redi Clamp, stainless steellugs, stainless steel washers (244)Full Circle Redi Clamp, stainless steellugs, stainless steel washers (247)

Pin hole leaks and punctures

in pipe7.3-17 1/2-2 Up to 150 PSI

245/248

Redi Clamp, stainless steel lugs, stainlesssteel washers (245)Redi Clamp, stainless steel lugs, stainlesssteel washers (248)

Pin hole leaks, puncturesand splits in pipe 7.3-21 2-12 Up to 150 PSI

256

Cast stainless steel, Full Circle clampcoupling with stainless steel springwashers Corrosive

environments

7.3-17 2-12 Up to 255 PSI

257

Super range cast stainless steel, FullCircle clamp coupling with stainless steelspring washers

7.3-17 4-14 Up to 175 PSI

261

All stainless steel, Full Circle clampcoupling with stainless steel springwashers Splits and holes in pipe 7.3-17

2-12

Up to 150 PSI

262

Super range all stainless steel, Full Circleclamp coupling with stainless steel springwashers

3-12

264

All stainless steel tapped, Full Circleclamp coupling with stainless steel springwashers

Leaks at service outlet 7.3-17

3-12

Up to 155 PSI

265

All stainless steel super range tapped, FullCircle clamp coupling with stainless steelspring washers

4-12

*Bodies formed to fit exact pipe O.D. All Tapping and Repair Products require Spring Washers. **Full Circle Clamp coupling may be used to join pipe only when stiffeners are used in the pipe ends. These products do not restrain axialmovement. Suitable anchorage must be provided where pipe movement could cause the pipe to move out of the coupling. ***Actual Working Pressure will vary depending on pipe wall thickness. Consult Smith-Blair for specific application.****Not for use on copper tube size (CTS) polyethylene.

SWP/2500/0710 - Revised 10/08/2010

Products for High Density Polyethylene Pipe

239

Smith-Blair, Inc. • 30 Globe Ave. • Texarkana, AR 71854 • Tel: 800-643-9705 • Fax: 800-648-6792 • www.smith-blair.com

Documents

Water Catalog.pdf