Embed Size (px)
Citation preview
11.75 hrs
1 pcs
f
0.15 mm
k
0.40 mm
h
1
97.00 g
d
Prusa MINI
Summary
A stand for four small ladies' watches with a bowl for small jewelry in thebase.
Fashion > Women
ladieswatchstand ladieswatch jewelrystand watchstand
watchholder watches watch
The stand consists of two mirror parts that are glued together (the sameSTL is provided for both, don't forget to mirror one of them if you're slicingyourself). An inner sleeve (for the hollow watch tube) and a locating peg(for the bottom portion) are used to connect and locate the parts whengluing – both of them should fit snugly and have over-insertion stops intheir holes, making the assembly quite easy and clean. I printed withprusament PLA and used loctite gel superglue, which worked well.
The print layout is shown in one of the pictures – the pieces are angled inorder to place the layer seam at an inconspicuous location using the "atthe back" seam setting. The angle of the infill has to be readjustedappropriately (which I've done already for the provided 3MF and GCODE).
SaddamCZ
Watch and jewelrystand for ladies
VIEW IN BROWSER
updated 18. 5. 2020 | published 18. 5. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
21.5 MB
11.75 hrs f 0.15 mm k 0.40 mm h PLA 97.40 g d PrusaMINI
updated 18. 5. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
369.4 KBupdated 18. 5. 2020
58.1 KBupdated 18. 5. 2020
2.2 KBupdated 18. 5. 2020
192.5 KBupdated 18. 5. 2020
Print without supports. I've tried using variable layer height to producesmooth radii in my print, however it produces visible stripes ofinconstistent surface finish – the provided 3MF and GCODE therefore havefixed 0.15 mm layer height, if you prefer the variable layer height, re-sliceto your liking.
whole-stand_015mm_pla_mini_11h45m.gcode
one-half.stl
upper-sleeve.stl
bottom-peg.stl
whole-stand.3mf
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
