Volume 20 No. 12 OCTOBER 2012

TTriple B Stone offriple B Stone offerers lands land--scaperscapers an alternative withs an alternative withnatural beautynatural beauty..

Asphaltt && ConcreteRecyclingShinglee GrindersCrushers,, Screens

Asphaltt && ConcreteRecyclingShinglee GrindersCrushers,, Screens

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

2

by Jon M. CaseyFrom the time that

Murphy Road Recyclingacquired the StratfordBaling Volume Reduc-tion Facility on GarfieldAvenue in Stratford, CT,Director of Operations,Jonathan Murray andhis staff have been mak-ing improvements to thesite. Currently, it is oneof the most modern andefficient dual stream re-cycling facilities on theEast Coast.

Murray recalled theprevious operation wasbeing used as a transferstation for C&D waste andthere was a single streampaper recycling operationthere as well. By the timethat Murphy Road Recy-cling purchased the prop-erty in September, 2008,the facility had fallen intomajor disrepair. The sur-rounding communitythought very poorly ofwhat was there at thetime. Overall, the facility

was not up to the stan-dards of excellence forwhich Murphy Road Recy-cling is known, so it wasat this time that they con-

sidered C&D processingas a way to improve the ef-ficiency of the facility.

“As a company, wehad been in C&D recy-

cling at some of our oth-er locations like EastWindsor and Waterburysince the 1980s,” hesaid. “There, we have

been using ContinentalBiomass Industries, Inc.(CBI) equipment to grindwood for years. We hadgood experience with

their equipment in thepast. We operate a CBI4600, an 8600 and a4000 in addition to a

Stratford Baling is a “Crown Jewel”in Connecticut's Murphy Road Recycling

Stratford 3

Pag

e 3• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

CBI Shear. So, because of that rela-tionship, we asked them to give us adesign proposal for Stratford.”

“We liked what they came up with,and work on the new system began inlate 2010,” he said. “With the permit-ting, clean up and fine-tuning at startup, it took us about 18 months to getthe system on line. Since then, the sys-tem has worked very well.”

Murray said that besides the instal-lation of the new CBI system, theycompletely repaved the site and addeda new inbound/outbound scale systemin the process. They installed a new

roof on the building and completely re-sided the structure as well. Using acurrent expression, this was truly an“Extreme Makeover!”

“While we are located in an industrialpark that is home to other heavy indus-tries and trucking companies, we haveresidential neighbors adjacent to ourproperty in the rear. We want to be agood neighbor, so as we developed ourremodeling plan, we were always mind-ful of the people around us,” he said.

The new system provides both singleand double ground wood materials, fora variety of uses. They produce recycled

wood products for mulch, biofuels,wood for pelletizing, and other groundwood products that consumers mightneed. Currently, there are three or fourwood products being shipped.

Additionally, the facility produces re-cycled concrete material for local con-tractors who need a material as cleanfill. Most of the paper material that oncewould have come to this location is tak-en to the Murphy Road Recycling facili-ty in nearby Bridgeport, CT. That sitespecializes in recycling paper waste.

Murray said they added a new balingsystem as a part of the improvementproject. They are constantly baling thewaste residue that is not recyclable. Thebales are staged, and then transported

to an approved landfill in Ohio, on aregular basis.

While Murray is busy overseeing oth-er facilities in Murphy Road Recycling,the day to day operation of StratfordBaling is under the watchful eye of SiteManager, Mike Schauer. Mike is a longtime employee with Murphy Road Recy-cling and does an excellent job of mak-ing certain the operation runs smooth-ly. Sean Vasseur serves as Mike’s righthand man, working as an equipmentoperator and maintenance manager, ajob that keeps him hopping all of thetime. “We have an outstanding crew atthis facility,” said Murray. “We appreci-ate all that they do for us there.”

Loader Rakes Grapple Buckets

Car Body Forks Grapples

Thumbs & Rakes Skid Steer w/ replaceable teeth

North American Attachments

800-380-8808www.excavator-attachments.com

7155 Big Tree Road • Pavilion, New York 14525

(585) 584-3425 • (800) 724-8722E-MAIL: sales@georgeandswede.com WEB SITE: www.georgeandswede.com

FAX (585) 584-8853

Manufacturer Financing on New Models - $ Low Rates $ Low Payments $FINANCING AVAILABLE ON ALL USED EQUIPMENT - Subject to Credit Approval

A Full Service Dealership Covering 17 Counties in Western New YorkProviding Exceptional Parts, Service, Rental, and Sales Departments....With 2 Service Trucks, 5 Mechanics in

the Shop, and a Parts Department that can provide parts to all of the equipment we sell and rent.

Established in 1983

George & Swede Sales & Service, Inc.

See Us At The Show October 24th & 25th, 2012

Henrietta Dome,

Monroe County Fairgrounds, Henrietta, NY

2006 Link-Belt 80SB52HP, Pin on Bucket, Esco

30” Bucket, 18” Rubber

Tracks, Dozer Blade,

Control Pattern Changer

$59,000

2012 Link-Belt 210 X2

9’8” Arm, 32” Tracks,Standard Machine

$Call For Price$

2011 Link-Belt 80SB24” & 42” Bucket,

Multi Function Hyd.,

17’7” Rubber Tracks,

6’11” Arm

$99,000

2011 Link-Belt 160 X2

10’ Arm, 23.5” Tracks,

Multi Function Aux, AC,

Quick Coupler

$145,000

2012 Link-Belt 160 X2120HP, 10’ Arm,

Multi-Function Hydraulics,

36” Bucket,

Hydraulic Coupler$Call For Price$

2012 Kawasaki 65ZV-2Base Machine, 3.3 Cubic

Yd. Bucket w/Bolt-On

Cutting Edge - Material

Handling, High-Lift Arm for

Material Handling, Firestone Tires 20.5x25 - 12 PR Traction

(L-2) Tires, Multi Function Grip, Battery Disconnect Switch, 3rd

Spool Valve, Ride Control, Wide Fin Radiator, 154 HP

$Call For Price$

Stratford from 2

Stratford 5

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

4

Waste Handling Equipment News EastIssn. 1085-7621

Waste Handling Equipment News is published monthly byLee Publications

P.O. Box 121, 6113 State Highway 5, Palatine Bridge, NY 13428Standard Class Postage Paid at Palatine Bridge, NY 13428

POSTMASTER: Send address changes to: Lee Publications, P.O. Box 121, Palatine Bridge, NY 13428Publisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. LeeVice President, Production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark LeeVice President & General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bruce ButtonEditor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. CaseyEditorial Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kathleen LeeComptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert MoyerProduction Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jessica MackayPage Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Michelle GresslerShop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Harry DelongSubscriptions/Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888-596-5329Classified Ad Manager - Peggy Patrei . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0111

MAIN OFFICE: Palatine Bridge, NY 13428 518-673-3237 - FAX: 518-673-2381Wendell Jennings (Sales Manager) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114Lyndsay Bock (National) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0115Brian Johnson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0161Mark Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0116Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110REGIONAL SALES OFFICESKegley Baumgardner (Western VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540-255-9112Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802-484-7240Ian Hitchener (Baltimore, Delmarva Peninsula, Southern New England) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-210-2066

Wanda Luck (Carolinas). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336-416-6198Mark Sheldon (OH, PA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814-587-2519Tina Krieger (National). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108

NATIONAL TRADE SHOW SALES Ken Maring,Trade Show Manager . . . . . . . . . . . . . . . . . . . . . . 888-355-5080 or 518-673-0103

Waste Handling Equipment News will not knowingly accept or publish advertising which isfraudulent or misleading in nature.The publisher reserves the sole right to edit, revise or rejectany and all advertising - with or without cause being assigned - which, in his judgment, is un-wholesome or contrary to the interest of this publication. Waste Handling Equipment Newsassumes no financial responsibility for typographical errors in advertisements; but, if at fault,will reprint that portion of the ad in which the error appears. Publisher accepts no financialresponsibility for ads which do not appear due to any circumstance.

November. . ADVERTISING DEADLINE: October 5Recycling Attachments & Carriers - Pedestal Breakers,Crushers, Shears, Grapples & MoreAnnual Buyers Guide (Listing submission deadline 9/10/12)

Show: TCIA Expo, November TBA

December. . ADVERTISING DEADLINE: November 2Land Clearing Equipment / Chippers, Grinders, Attachments,Biomass Energy

January. . ADVERTISING DEADLINE: December 7Grinders & Shredders / Metal Detection & Magnetic Separation

February. . ADVERTISING DEADLINE: January 4Wood Waste Recycling / Composting / Biomass EnergyPre-Show: Hard Hat ExpoPre-Show: National Demolition Association

ADVERTISE!TABLE OF CONTENTS

The Editorial Deadline precedes the Ad Deadlineby two days. Waste Handling Equipment News read-

ers include owners, operators, and purchasing agents

involved in construction demolition, asphalt/concrete

recycling, wood waste recycling and composting. Our

editorial emphasizes new equipment, site stories,

association updates, legislation and industry news.

If you have news to contribute, contact:

Jon M. Casey, EditorWaste Handling Equipment News6113 State Highway 5

Palatine Bridge, New York 13428

Tel: 717-258-6775

Fax: 518-673-2699 E-Mail: jcasey@leepub.com

Cover photo: Justin Hawksworth, sales representative forPowerscreen Mid-Atlantic, Inc. (L) and Jeff Biffle, who overseesoperations at Triple B Stone (R), find the new equipmentconfiguration extremely efficient and productive.

Stratford Baling is a “Crown Jewel” inConnecticut’s Murphy Road Recycling . 2

Triple B Stone offers landscapers analternative with natural beauty . . . . . . 8-9

by Jon M. Casey

Morbark signs Garden State BobcatGroup to dealer network . . . . . . . . . . . . 10

Grillo Services extends container division. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Visionaire Inc. announces new mid-sizecab air conditioner . . . . . . . . . . . . . . . . 16

Recycling the Garden State. . . . . . . 22-23by Steve Wagner

High torque screen classifying cutter . 27

Classifieds . . . . . . . . . . . . . . . . . . . . . . . 32

Pag

e 5• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Op-Ed by Dave WhitelawWhile researching for

this month’s “Hey,GrinderGuy” article, Iwas struck by the re-sponses I received andthe respondent’s utterlack of optimism in ourindustry’s business com-munity. “Would you couldyou if you could? Wouldyou could you if youshould?” I asked in a Dr.Seuss kind of way. Whereis the optimism?

I didn’t find any! Thereis no excitement. Thereare no lofty projections.

“We are trying to getby,” I heard. “We areholding our own,” peoplehave said. “We are tryingto maintain,” othersreplied. These are thekinds of things I amhearing out in the busi-ness community.

If the Democrat Guygets reelected, does thatmean we are going to fold

up and walk away? Thereis no doubt the vast ma-jority of business ownersare Republicans. At leastaccording to my observa-tions, in this businessthey are.

If the Republican iselected, it would certainlychange the attitude ofthese owners, however,we are still in the sameballgame. We will justhave a different pitcher.We will still have the

same debt, the same twoparty system, and thesame Congress.

What’s the basic prob-lem? To my thinking,there are no “free rides.”Somewhere, this truthhas gotten lost. Childrenno longer seem to betaught that hard workspays off and gets youanywhere you want to goif you work for it.

So, what is going to cre-ate optimism for every-

one? What will create asense that we are going inthe right direction? I’mnot certain. We better fig-ure it out soon, while westill have a chance.

Hey GrinderGuy, helpme salvage my season!

Hey Charlie, you are notalone. Did you see thevideo message from ScottsMiracle-Gro Company®CEO Jim Hagedorn?http://thescottsmiracle-grocompany.com/6-12-12_Video_Message.htmlThis video pretty muchsums up everybody’s sea-son in the Lawn and Gar-den Industry.

Weather is the numberone driving force everyyear. This year is no dif-ferent. We started off well,then crashed and burnedsoon after. Now what?

I spoke to a half dozenbusiness owners andfound a few things to con-sider to help us salvagethe year. Here are some ofthose ideas:

• Inventory — This oneis pretty easy. Reduce in-ventories, not only foryour finished products,but for your raw materi-als as well. Limit your or-dering. Have a sale. Low-er contract prices to in-crease shipments.

• Renegotiate — Yoursuppliers are in the sameboat that you are. Rene-gotiate to stock your in-ventory at a lower dollarvalue. This will loweryour average cost perunit across the board andit will increase your profitnext year.

• Don’t be afraid to lay

seasonal workers off ear-ly. It can be a long, ex-pensive Winter. If youdon’t have the work, letthem go.

• “Get rid of your leech-es” — This advice camefrom a friend in Atlanta.It will save you the stressnext year. If customersdon’t pay, send thempacking. Slow pay is nopay. Let them go. You arenot a bank. Next year youwill be much happier.

• Work with Friends —Friends make you moneyand support you whenyou need it. Buy theirmaterial and offer thembargains in return.

• Find new clients —Maybe your old clientsare not selling like theyuse to. Get going findingsome new ones.

Last year’s drought ofraw materials in theMulch business has giv-en way to a flood of mate-rial and cheaper pricesthis year. At the sametime, it seems people donot have the money tocarry that material forthe winter. That is leav-ing a lot of suppliers highand dry. Work with yoursuppliers to help keepthem afloat. You willneed them sooner or lat-er. Pay your bills in fullwhen possible. Payinghalf now and half later,only pays half the billsinstead of all of them.

I hope this helps, Char-lie. Good Luck to you andyour friends.

Questions? Drop us aline at GrinderGuy@Ask-theGrinderGuy.com

As one of 15 facilities inthe All AmericanWaste/Murphy Road Re-cycling organization, theStratford Baling opera-tion has become a“Crown Jewel” withintheir system. “We are thelargest private collectioncompany in Connecti-cut,” said Murray. “Weare looking to work to-gether with the communi-ties that we serve. TheStratford Baling remodel-ing effort was no excep-tion. We worked closelywith our local officials.They were very under-standing of what we werelooking to accomplish.They worked with usevery step of the way.”

Murray is excited abouthow well the improve-ments have gone. Sincesales and marketing ofthe recyclables is part ofMurray’s responsibilities,he is looking forward tothe continued growth ofthe operation especiallywith respect to the sale ofthe recycled wood prod-ucts. “We have been ex-tremely successful mar-keting the paper, plastic,metal and concrete mate-rials and we are alwayslooking for more cus-tomers, especially in thewood recycling segmentof the business.” Formore information aboutStratford Baling, contactthem at 800-998-2984.

Stratford from 3

Optimism... Where is the Optimism?

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

6

by Mitch Rose, vice presi-dent of Marketing andBilling Strategy, Billtrust

Action Carting Envi-ronmental Services, aleading solid waste andrecycling collector in themetropolitan New YorkCity area is a recent win-ner of the ManhattanChamber of CommerceGlobal Green Award. Ac-tion Carting serves someof the city’s most recog-nizable facilities, includ-ing the Empire StateBuilding, Yankee Stadi-um and the New YorkMets’ Citi Field. Thecompany works withhospitals, constructionfirms, restaurants andbusinesses of all types,and as a result, itprocesses approximately13,000 invoices eachmonth some for lessthan $100 for the small-er customers and somefor more than $50,000for the larger clients.

At one time, ActionCarting processed invoic-es through an outsideprinting service. Thisservice created andtransmitted PDF files forthe printer to print. Thenthey were stuffed andmailed. At times, theprocess included specialhandling instructionsprinted on stickers, as away to inform processors,of exceptions to normalbilling rules.

Action Carting’s ChiefFinancial Officer, BrianGiambagno, assessedthat billing process, not-ing the inefficient way ofhandling this manualprocesses, the lost com-munication opportunitiesbecause of a lack of dy-namic invoice messagingcapabilities during thisprocess, and he also dis-covered Action Carting’slack of eBilling for the

customer base. More im-portantly, Action Cartingwas not using data con-tained in the invoices tomanage their billingprocess more effectively.

Toward a more efficient billing

processAfter his review, Gi-

ambagno decided to finda new solution - one thatwould cut costs andstreamline core process-es. Giambagno and histeam explored several op-tions, and ultimately de-cided to ask three compa-nies for proposals on howto meet their billing goals.

Three companies, theincumbent company whowas doing the billing, asecond billing solutionsprovider and Billtrust,each submitted proposals.After thorough considera-tion, Action Carting se-lected Billtrust, becauseBilltrust proposed a tech-nology solution ratherthan solving the issue as aprinting challenge.

Getting results with atotal technology

solutionAt the onset, Billtrust

worked closely with Ac-tion Carting to identifytheir billing needs. Theywanted to streamline corebusiness functions andreduce costs. Billtrustalso wanted to identifyways to use data con-tained in the invoices toimprove overall businessoperations. Some of theways included sustain-ability goals and cus-tomer communications.

“Customer satisfactionis our top objective,” saysGiambagno. “Billtrusthelped us redesign ourinvoices and create a for-mat that enables us tocommunicate with ourcustomers more effective-ly. This was huge for us

since we often need toconvey information likeholiday pickup sched-ules. Now we can print itright on the invoice. Thatreduces phone inquiries.”

Because Action Cart-ing emphasizes sustain-ability, and it is a top ob-jective for many of theircustomers as well, theywere able to develop apaperless billing process

that was easy for theircustomers to use. Theyrealized that a paperlessbilling process not onlyreduces the cost and en-vironmental impact ofbill printing, it elimi-nates the logistics in-volved in bill delivery.

Their goal to converttheir customers from pa-per to E-billing was 25 forthe first year. Within six

months, 32 percent of Ac-tion Carting’s customershad converted to elec-tronic billing. That cutthe payment cycle by sev-en days. The reason theyexceeded the initial goalwas in part due to Bill-trust conducting a proac-tive phone campaign.

Billtrust also createdan online portal that Ac-tion Carting’s customers

can use to view and printtheir own bills. Now, in-stead of calling the Ac-tion Carting billing de-partment to request anew bill when an invoiceis misplaced, customerscan access it onlinethemselves.

The new automated ap-proach also eliminates

160 Warren Avenue

WESTBROOK, ME 04092

207-854-8411

BANGOR, ME

207-942-4838

CARIBOU, ME

207-498-2547

CONCORD, NH

603-224-4063

CHELMSFORD, MA

978-256-9571

4 Executive Plaza

YONKERS, NY 10701

914-738-5100

Fax 914-738-6847

www.ehrbar.com

601 Coates Avenue

HOLBROOK, NY 11741

631-563-7600

Fax 631-218-1069

www.ehrbar.com

40 Kenosia Avenue

DANBURY, CT 06801

203-743-0088

Fax 203-743-0266

www.ehrbar.com

EDWARD EHRBAR, INC.

PENN JERSEY MACHINERY LLC120 Gordon Drive

LIONVILLE, PA 19341

610-363-9200

Fax: 610-594-0829

61 County Line Rd.

SOMERVILLE, NJ 08876

908-218-1919

Fax: 908-218-1959

1330 Hurffville Rd.

DEPTFORD, NJ 08096

856-227-6400

Fax: 856-227-0046

4805 ScoobyLane

Carroll, OH 43112

(P) 740-654-5304

(F) 740-687-9130

Toll Free 866-262-4181

Cleveland, OH Branch

525 Golden Oak Pkwy

Oakwood Village, OH 44146

(P) 440-439-4567

(F) 440-439-1789

Piketon, OH Branch

3668 US Route 23 South

Piketon, OH 45661

(P) 740-289-3294

Washington, PA Branch

400 West Beau St

Washington, PA 15301

(P) 724-222-2447

(F) 724-22-1118

Indianapolis, IN Branch

7019 Brookville Rd

Indianapolis, IN 46239

(P) 317-375-7790

(F) 317-375-7792

Cookeville,TN Branch

1220 Southside Dr

Cookeville, TN 38506

(P) 931-526-6222

(F) 931-526-2662

Rineyville, KY Branch

6300 Rineyville Rd

Rineyville, KY 40162

(P)270-360-1010

(F)270-360-1050

Aiken, SC Branch

1252 Old Kimbill Trail

Aiken, SC 29805

(P) 803-642-0060

(F) 803-642-0209

Jacksonville, FL Branch

4710 Dignan Street

Jacksonville, FL 32254

(P) 904-268-6554

(F) 904-268-0939

Plant City, FL Branch

2812 Airport Rd

Plant City, FL 33563

(P) 813-754-5800

(F) 813-754-5801

Pasco, WA Branch2300 N Commercial Ave

Pasco, WA 99301(P) 509-728-6614

Vancouver, WA Branch3909 NW Fruit Valley Rd

Vancouver, WA 98660-1278 (P) 360-694-7157

NJ Branch(P) 740-422-6045(P) 609-313-0720

COMPANY WRENCH

Action Carting streamlines billing to save money and time

Action 7

Pag

e 7• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

the need to affix specialhandling stickers to billsmanually. Today whenAction Carting needs toprovide exception han-dling rules, they go intothe invoice automatically.

Savings and benefitsthat go beyond the

bottom lineBesides tangible cost

savings such as elimina-tion of postage fees andprinting costs, the Bill-trust solution deliveredmany “soft cost” savingsas well. Giambagno re-ports that the billing de-partment is more focusednow that team memberscan devote their time totasks other than answer-ing phone calls andprinting bills. Now, asthe company grows andadds new customers,they can handle the in-creased workload with-out adding new staff.

Invoice messaging hasalso resulted in higherlevels of customer satis-faction now that they areable to communicate inthis new way. Customersknow in advance, what toexpect when holidays rollaround. The company nolonger has to handle callsat the level it once did.

Action Carting Market-ing Analyst Jenna DiBellasays that the invoicemessaging capability hasalso bolstered the compa-ny’s social media out-reach efforts: “We engagewith customers on socialmedia platforms likeTwitter, which allows usto exchange important in-

formation and solicitfeedback and ideas.Through invoice messag-ing, we can remind ourcustomers about thesecommunication channelsand drive additional traf-fic, allowing us to expandthe two-way communica-tion opportunities.”

Learn more about Ac-tion Carting at www.ac-tioncarting.com. Find outmore about Billtrust atwww.billtrust.com.

Action from 6

ww

w.

was

teha

ndlin

g.co

m

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

8

While Triple B Stone’s River Rock Mine nearSpeedwell, VA is officially considered a mining opera-tion, it could be just as easy to make the case thatthey are recyclers of naturally occurring river rockand sand for use as specialty landscaping materials.For the most part, products from Triple B Stonecurrently are sold to landscapers for beautifyingproperties around the Mooresville and Charlotte, NCmarketing area. The stone is not only decorative, butit is functional as well.

According to Jeff Biffle, head of operations forTriple B Stone, the way the business started was asa way to fill the need for decorative river stone asriprap and landscaping material around the shorelineof Lake Norman and at commercial properties in thegreater Charlotte area.

“My brother Greg (driver of the No. 16 3M Ford

Fusion for Roush Fenway Racing in NASCAR’s SprintCup Series) was looking for decorative river rock touse as landscaping material for his property on LakeNorman and for his personal racing garage that hewas building in Mooresville,” he said. “Greg was notable to find an adequate supply of river rock, andduring his search, he came across the man who wasworking at this site to excavate rock of a specific sizeto sell to a select number of customers. Greg knewthat with our ingenuity and ability to sell these rockproducts, that we could make a thriving business ofthis if we did it properly from the beginning.”

The result is this 26 acre sand and gravel operation(20 acres permitted for mining) that produces fivesizes of washed Virginia Brown River Rock along withwashed sand and two sizes of larger, boulder sizeddecorative rock as well.

Start upJeff recalled that until he started his work at Triple

B Stone, he had been running the family steelconstruction business out in Washington State.When the construction economy took a turn for theworse at approximately the same time his mother andfather decided to retire from that business, Jeff andGreg got together and decided that they would ven-ture into the unknown world (for them) of river rockand sand mining by investing in what is now Triple BStone River Rock Mine. That was in 2010.

Jeff said that initially, after he moved east, hebegan by getting his Virginia miner’s card. Next, hetook the Virginia State Mine Foreman’s exam. Aftermastering those two challenges, he used his experi-ence and skill to assemble an operation that suppliesclean, washed river rock to the Mooresville-Charlottearea. In a little over 18 months, the operation hasgrown considerably.

“We started out with the equipment that the previ-ous owner was using and it didn’t take long to realizethat we needed to upgrade our plant if we were goingto be successful,” said Jeff. “He was looking for onespecific sized stone and we could see that there wasa market for everything that was coming from thesite. As time has passed, we’ve continued toupgrade.”

“We started with a Powerscreen Mark II Screen thatGreg had been using on his farm and other personalprojects. It wasn’t long before we went to PowerscreenMid-Atlantic, Inc. and bought the PowerscreenCommander 1400 that we are using today,” he said.“About six months later, we could see that we neededmore screening capability so we got the Warrior 1800.We were using a Greystone coarse material washer,but that model we had wasn’t big enough to do thejob. So late last year, we added the KPI-JCI PHB 1800Blade Mill and Triple Deck Screen system to clean therock as it comes off the Warrior 1800.”

Meanwhile, Jeff said that in January of 2012, theydecided to revamp the entire layout to make it moreefficient and more productive. So, he began by fabri-

TripleB 9

Large rock coming off the Powerscreen Warrior 1800 goes directly into this haul truck and when full is taken and dumped on the stockpile to be washed with rock of thissize. Jeff said that because there are not large quantities of this size stone, the need to stockpile it here and then move it later via front end loader, is eliminated.

TTriple B Stone offers landscapers riple B Stone offers landscapers an alternative with natural beautyan alternative with natural beauty

by Jon M. Casey

Screened and washed Virginia Brown River Rock like that taken from Triple B Stone's facility, makes excellentcover for landscaping projects.

Pag

e 9• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

TripleB from 8

cating the load out hopper that sits atop a dumpingramp built into the hillside that leads into the clear-ing above the operation.

“My steel construction experience came in handyfor a number of projects around here, that load outhopper being one of them,” he said. “Now we canunload the haul trucks directly. Before this hopper,we needed to handle the rock an additional time.Now, the rock is dumped into the vibratory hopperand it moves directly into the screening system.”

The work done thus far, demonstrates Jeff’singenuity and experience in steel fabrication andequipment installation. He noted that one of his ear-liest projects was building a heavy duty steel bridgethat traverses Dry Run Creek, leading back to theportion of the property where the mining of the rockactually takes place.

“We needed a bridge that would be able to hold thelarger haul trucks that we were planning to usehere,” he said. “So I built a 100 ton bridge that canhandle the load. It has done the job and then some!”

The production processRiver rock and sand is dumped into the load out

hopper, with the largest material passing over thegrizzly and onto a conveyor sending it directly to aboulder stockpile. These eventually will be hand-washed so that even rock of this size can be sold as aclean, washed material. Material that passes throughthe grizzly goes directly onto the Powerscreen Warrior1800.

There, material is screened into three sizes with thelargest, 6 to 14-inch rock going into a haul truck tobe taken to a stockpile. The 2 to 7-inch medium sizedmaterial moves onto the Commander 1400 where it isscreened and washed with the under 2-inch passingthrough a Telsmith classifier log washer before beingstockpiled.

The 2 to 4-inch and the 4 to 7-inch are washed,then conveyed to their respective stockpiles as well.The 1-3/4-inch material screened through theWarrior 1800 conveys up and through the KPI-JCI24-foot x 16-foot Blade Mill, then passes over itsTriple deck, twin-screw sand screen system, givingthem four washed products: Sand, pea gravel, 1/2to3/4-inch and 3/4 to 1-3/4-inch.

“When we are in full production, we have thecapacity to run about 300 tons per hour,” said Jeff.“Right now, we are running in the 200 to 220 ton perhour range.”

Jeff said that the operation currently employsseven to ten people depending on the season. As sales

increase, the workforce increases accordingly. “Jack Davidson, our mine foreman and his son

‘Beau’ operates the equipment and handle the dailyoperations. My daughter Megan is here for thesummer doing administrative work as she takes abreak from her studies at college. I oversee the oper-ations here and take one or two days away from theplant doing sales work.” Jeff commutes regularlybetween Mooresville, NC and Speedwell, VA, whichallows him to oversee the operation and do sales workin their primary market as well.

“Greg likes to come in to spend a day when he can,”said Jeff. “He likes to operate the machinery. He’s anexcellent equipment operator as well as being achampion race car driver. During the racing season,his schedule is usually very full. So, he doesn’t visithere as often as we would like.”

For more information about Triple B Stone, visittheir website at www.triplebstone.com or give Jeff acall at 704-664-3464.

by Jon M. CaseyFor Adam Logan, then sales

representative for PowerscreenMid-Atlantic, Inc., the opportunityto work with NASCAR racecardriver Greg Biffle, and Greg’sbrother Jeff, to help create a firstclass decorative stone mining andprocessing plant, was a challeng-ing yet rewarding experience as asalesperson. That was in 2010and 2011. Today, Adam serves asregional sales manager forPowerscreen Mid-Atlantic, Inc.and is pleased with the results.

“Greg owned a PowerscreenMark II that he was using on someof his properties as he was doingsome cleanup work,” said Adam.“The deposit at Triple B Stonecontains a 24-inch minus materi-

al, and the equipment that he hadwhen he started the operation,was not sufficient to process thatmaterial. Greg wanted to do morethan scalp off the larger material.”

Adam said that Greg was look-ing for something like the Warrior1800 with an open throat designthat could handle enough tonnageto keep up with the rest of hisplant. He also wanted to be able tomove the equipment around easi-ly when he needed to modify hisoverall plant layout. The Warrior1800 has been the perfect equip-ment for the job.

“The Commander 1400 rinsercleans the 5-inch and 2-inch rockgiving him two clean products offthat machine,” said Adam. Theother material goes over to the

other side of the Warrior 1800where it is cleaned and screenedwith the other washing andscreening system. With thePowerscreen 1800 and 1400units, Triple B Stone has an excel-lent primary and secondaryscreening system in their opera-tion.

“We enjoy working with Triple BStone,” he said. “Our new salesrepresentative for that area,Justin Hawksworth, is eager tohelp them refine their operationand increase sales to landscapersthroughout the area.”

For more information onPowerscreen Mid-Atlantic, Inc.visit their website at www.power-screenmidatl.com or call them at336-992-9755.

Powerscreen Mid-Atlantic, Inc. helpsTriple B Stone startup

Adam Logan of Mid-Atlantic Powerscreen (L) and GregBiffle, driver of the No. 16 3M Ford Fusion for RoushFenway Racing in NASCAR's Sprint Cup Series (R),promote Powerscreen equipment at the AGG-1 andWorld of Asphalt Expo in Charlotte, NC earlier this year.

One of the first tasks for Jeff was to build this heavyduty bridge that traverses Dry Run Creek. Haul trucksgo to and from the mining site over this bridge.

Jack Davidson works carefully to move 6 to 14-inch rock, as it is being hand washed.

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

10

WINN, MI — Morbark, Inc., a leadingmanufacturer of tree care, forestry,sawmill and wood recycling equipment, ispleased to announce it has signed a con-tract making Garden State Bobcat Groupits exclusive tree care products dealer forNew Jersey and Staten Island, NY.

The Garden State Bobcat Group con-sists of Bobcat of Central Jersey locatedin Green Brook, NJ, and Garden StateBobcat located in Freehold, NJ. Bobcatof Central Jersey will be handling Mor-bark equipment sales, rentals, partsand service for northern New Jerseyand Staten Island, NY, and GardenState Bobcat will be handling centraland southern New Jersey.

“Garden State Bobcat Group is an ag-gressive equipment dealer with a histo-ry and reputation for great service,” saidCasey Gross, Morbark Tree Care Prod-ucts sales manager. “Their expertiseand knowledge of the local market willhelp support our customers’ success.”

“We are excited to represent Morbarkin New Jersey and Staten Island, NewYork,” said Rob Woods, dealer principleof the Garden State Bobcat Group. “Ourgoal is to offer our customers the bestcompact equipment available in themarket place. The addition of Morbarkwill complement our existing top of theline products and offer our customersmore solutions to their compact equip-

ment needs.”Morbark, Inc., based in Winn, MI,

builds equipment that creates opportuni-ties in the forestry, recycling, sawmill, bio-energy and tree care markets. Innovatingand manufacturing durable, high per-formance equipment for more than 50years, Morbark offers a full line of wholetree and waste wood chippers, flails,brush chippers, horizontal and tubgrinders, sawmill equipment, materialhandling systems and more. Morbarkequipment helps customers harvest,process and convert organic materialsinto valuable, useful and environmentallysound products. Visit www.morbark.com,“Like” us on Facebook or subscribe to our

YouTube channel.Garden State Bobcat Group opened in

1983 as R.A.W. Equipment Co., Inc., asa single store, two person operation inHowell, NJ. During the past 28 years,the company has grown to more than20 employees with multiple locationswithin New Jersey. The Garden StateBobcat Group offers New Jersey’s mostcomplete line of compact construction,rental and landscape equipment forsale, lease or rent. In addition to Mor-bark the Garden State Bobcat Grouprepresents other top manufacturerssuch as: Bobcat Co., Finn Corp., Yan-mar, Doosan Portable Power and Pro-tech Manufacturing.

www.aaauctionfinder.com Search for all types of auctions at any time.

NNeww updatess alll thee time!!

Morbark signs Garden State Bobcat Group to dealer network

The Garden State Bobcat Group consists of Bobcat of Central Jersey located in GreenBrook, NJ, and Garden State Bobcat located in Freehold, NJ.

Pag

e 11• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Equipment YouCan Count On

The worldwide network of Vermeer dealers makes the difference -get to know your local dealer. In the field or in the shop, nobody is more determined to see

you succeed. Vermeer is an innovative leader in the manufacturing of underground and tree-care equipment. They can also be your most valued partner in your day-to-day operations.

Vermeer Is Your Total Solutions Provider

Contact your dealer by calling 1-888-VERMEER,

or visit the Web at www.vermeer.com

VERMEER and VERMEER LOGO are registered trademarks of Vermeer Manufacturing Company in the

US and/or other countries.

© 2002 Vermeer Manufacturing Company. All Rights Reserved.

11220 Allisonville Rd.

Fishers, IN 46038

(317) 842-10403310 W. Coliseum Blvd.

Fort Wayne, IN 46808

(800) 649-11573566 Citadel Cir.

Newburg, IN 47630

(812) 490-44002801 Beverly Dr.

Aurora, IL 60504

(630) 820-3030

1801 179th St. North

East Moline, IL 61244

(309) 751-9540Route 24 East

Eureka, IL 61530

(309) 467-37161005 Thorrez

Jackson, MI 49201

(800) 336-38891196 A. Franklin St.

Marne, MI 49435

(616) 677-5900

VERMEER MIDWEST INC.www.vermeermidwest.com

VERMEERMIDSOUTH INC.

www.vermeermidsouth.com1200 Vermeer Cove

Cordova, TN 38018

(901) 758-19285246 Greenway Dr.

Jackson, MS 39204

(601) 923-8888

VERMEERNORTH ATLANTICSALES & SERVICE

7 Maple Ave.

Mt. Holly, NJ 08060

(609) 267-6600(800) 624-0623

2888 E.

Harrisburg Pike

Middletown, PA 17057

(717) 930-8780(888) 572-4283

805 Grundy Ave.

Holbrook, NY 11741

(631) 580-4400(888) 402-7823129 Route 6,

Bldg. #2

Mahopac, NY 10541

(845) 628-9850(800) 448-9850

VERMEER NORTHEASTwww.vermeernortheast.com

1235 Rt. 9

Castleton, NY 12033

(518) 732-7201605 Lewiston Rd.

Topsham, ME 04086

(207) 373-0880

224 South St.

Hopkinton, MA 01748

(508) 497-0886770 Derby Ave.

Seymour, CT 06484

(203) 736-9542

VERMEERMID-ATLANTIC INC.

www.VermeerMidAtlantic.com10501 Vermeer Place

Ashland, VA 23005

(800) 552-2074229 Jedburg Rd.

Summerville, SC 29483

(800) 246-430713005 Balls Ford Rd.

Manassas, VA 20109

(877) 661-65662803 Grand View Dr.

Simpsonville, SC 29681

(800) 850-47108424 Norcross Rd.

Colfax, NC 27235

(888) 993-9344

3501 Jones

Sausage Rd.

Garner, NC 27529

(888) 883-76338830 Corridor Rd.

Annapolis Junction,

MD 20701

(800) 492-127410900 Carpet St.,

Charlotte, NC 28273

(800) 768-3444

VERMEER-WISCONSIN INC.www.vermeerwisconsin.com

5445 North 131st St.

Butler, WI 53007

(800) 964-64622304 Kelbe Drive

Little Chute, WI 54140

(800) 859-9220W3090 County B

West Salem, WI 54669

(800) 759-6897

VERMEER HEARTLANDVERMEER SALES & SERVICE INC.

OF OH & PA2389 Medina Rd.

Medina, OH 44256

(888) 213-3544131 Wisconsin Ave.

Cranberry Twp., PA 16066

(888) 213-8340 • (724) 935-9277110 Stanford Pkwy.

Findlay, OH 45840

(888) 213-8338 • (419) 424-0572

2574 US Hwy. 22 NW

Washington Court House,

OH 43160

(740) 335-8571(740) 335-1926

424 South Mulberry St.

Elizabethtown, KY 42701

(270) 737-1721270) 737-2868

5900 Mac Corkle Ave.

St. Albans, WV 25177

(304) 768-5965

900 Cpt Joe Fulghum

Murfreesboro, TN 37129

615-869-02502007 Middlebrook Pike

Knoxville, TN 37921

865-524-9174

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

12

Ron Dokell, a founderand charter member ofthe National Associationof Demolition Contractorspassed away over theweekend in Houston. Ronwas one of the first con-tractors to realize thatthere was a need for anorganization to representdemolition contractors inthe United States andCanada. He worked dili-gently to develop an asso-ciation to meet the needsof everyone involved in thedemolition process. Hewas a member of the As-sociation’s first executivecommittee and served asits third president. He wasinstrumental in develop-ing the programs that al-lowed the organization toattract new members andto grow the necessary in-frastructure to become animportant part of the con-struction associationmovement in both coun-tries. He also served onthe NADC’s first safetycommittee and was deeplyinvolved with the develop-ment of its DemolitionSafety Program and De-molition Safety Manual.

Ron’s obituary withservice details will appearshortly on the HoustonChronicle’s website atwww.chron.com

Ralph David Loewen-dick of S.G. Loewendickand Sons of Columbuspassed away on Mon.,Sept. 3. Ralph, like Mr.Dokell, was a chartermember of the NADCand directly involvedwith the development ofthe Association from itsearliest days when it hadonly 40 or 50 memberfirms. Ralph’s son, Davidserved as the Associa-tion’s 18th president. Heis survived by his wife,Crystal and children Ter-rie, Vickie, David,Joseph and Michael, 11grandchildren and 4great grandchildren.

Visitations for Mr.Loewendick are sched-uled for Fri., Sept. 7,2012 at the Dwayne R.Spence Funeral Home,650 West Waterloo Streetin Canal Winchester,Ohio. Services areplanned there at 11 a.m.on Sat., Sept. 8 with in-ternment at the FranklinHills Memory Gardens.

In lieu of flowers, dona-

tions may be made inRalph’s name to the OhioCancer Research Associ-ates, 50 W. Broad St.,Suite 1132, Columbus,OH 43215. Online condo-lences may be posted atwww.spence fune ra l -home.com.

Both of these men wereinstrumental in the for-

mation and growth of theNational Demolition As-sociation. They were ex-tensively involved in thedevelopment of plans andprograms that havebrought the NDA to theforefront of the construc-tion economy in the Unit-ed States, Canada andbeyond. They will be sore-

ly missed by their fami-lies and friends. The Na-tional Demolition Associ-ation wants to offer itsmost sincere condolencesto the Dokell andLoewendick families onthe loss of these two ex-ceptional men.

WESTCHESTER TRACTOR INC.60 International Blvd Brewster, NY 10509

845-278-7766 • Fax 845-278-4431www.wtractor.com

W. M. BIERS INC.Port of Albany

Albany, NY 12202518-434-2747

www.wmbiers.com

CLEAVES CO. INC.300 Reservoir St.

Needham, MA 02194781-449-0833

CHERRY VALLEY TRACTOR35 Route 70 West Marlton, NJ 08053

856-983-0111www.cherryvalleytractor.com

TYLER EQUIPMENT CORP.251 Shaker Rd.

East Longmeadow, MA 01028800-292-6351

Fax: 413-525-5909Parts Line 877-255-6351

Chipper Sales Rep Tom TylerCell 203-509-0967

www.tylerequipment.com

TYLER EQUIPMENT CORP.1980 Berlin Turnpike

Berlin, CT 06037800-352-4473 • 860-356-0840

Parts Line 860-356-0848Chipper Sales Rep Tom Tyler

Cell 203-509-0967www.tylerequipment.com

Two giants of the demolition industry and the National Demolition Association have passed away

Pag

e 13• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Purchases first Caterpillar brand roll

off truck sold in Connecticut

MILFORD, CT — In anexpansion of its containerdivision, Grillo Services,LLC is the first Connecti-cut business to purchaseCaterpillar’s new CT660commercial truck in a rolloff configuration. Thepurchase will enable Gril-lo to increase its solidwaste disposal division toserve municipal, com-mercial and residential

customers, and provideexpanded services to treeremoval and large scalelandscape companies,saving them time andmoney in tree removaland organic recycling.

The custom built,sleek, ergonomically de-signed Caterpillar CT660,model year 2012, fea-tures Caterpillar’s CX31transmission for in-creased fuel mileage aswell as a set back frontaxle with a shorter wheelbase, allowing for a better

turning radius andgreater cab visibility.

Caterpillar had previ-ously only manufac-tured diesel truck en-gines for truck chassismade by Ford, Interna-tional, PACCAR andFreightliner. Just thispast year, the companybegan manufacturingtheir own trucks, follow-ing an extended periodof road testing.

“This purchase willhelp Grillo Services ex-pand our container divi-

sion, offering clients onestop shopping,” said Gril-lo Services President,Michael J. Grillo. “We ex-pect the division to dou-ble its contracts as a re-sult,” he continued.

“We are delighted thatGrillo Services is our firstroll off truck purchaser,”said David J Gillen, onhighway sales represen-tative at H.O. Penn Ma-chinery, the CaterpillarDealer for Lower NewYork and Connecticut.“We look forward to fur-ther facilitating GrilloServices’ future growth.”

Grillo Services, LLC is a19 year old family runlandscape supply compa-ny providing containerand dumpster rentalservices, organic com-post, bark and woodmulches, specialty soils,decorative pavers andgravel for commercial,residential and municipalclients. The company,headquartered at 1183Oronoque Rd. in Milford,CT., employs 18 full andpart time people and pro-vides regional deliveryservice. Contact them atwww.grilloservices.com,e-mail info@grilloser-vices.com, or call 203-877-5070.

Chadwick BarossChelmsford, MA

New England

W.M. BiersPort of Albany, NY

NY & CT

W.E. TimmermanWhitehouse, NJ

Northern NJ

Dave Heath & Assoc.1-800-228-8032

Grillo Services extends container division

Grillo Services, LLC isthe first Connecticutbusiness to purchaseCaterpillar's new CT660commercial truck in a rolloff configuration.

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

14

SOUTHAVEN, MS —The new Terex FuchsRHL350 E material han-dler boasts a durable, lowground contact pressuretrack drive that is de-signed for operating inunpaved scrap yards andrecycling centers withrough ground conditions.This purpose built mate-rial handler features theTerex Fuchs exclusiveBlueEVOLUTION® ap-proach to machine designand sustainability, whichenhances handler power,performance and efficien-

The New Kolossus Solid Tire Line

ADVANCE TIREwww.advancetires.com

800-445-6647Your Complete Source for Solid Tires.

INC

SOFT RIDESOLID TIRESSOFT RIDE

SOLID TIRES

HOW ARE YOUR TIRES DOING?HOW ARE YOUR TIRES DOING?

No flatsNo down timeNo additional tire costNo rims to buy

No flatsNo down timeNo additional tire costNo rims to buy

www.advancetires.com800-445-6647

Your Complete Source for Solid Tires.

Spare Parts Custom Made Screens For AllManufacturers & Models

Bucket LinersHammer BarsSplit SprocketsAugersRebuild & New Rotors* All FabricationProducts Are Available inAR450 Plate

Most parts custom fabricated and shippedwithin days not weeks!

Pictured are just a few samples of our quality work

Morbark Grinder Screen

Roto Chopper Screen Jones Grinder Screen

Split Sprockets

Front Wear Liner for the Jones Grinder

Now Available Duragrind Hammers

Call us for your parts needs.

Phone: 301-722-4030Fax: 301-759-4064

E-mail: Roy@potomacmetal.comCell: 301-697-3898

Visit our web site: www.potomacmetal.comPO Box 141512001 Siebert Rd. SE, Cumberland, MD 21502

With direct fromthe manufacturer

pricingGrind More –Change Less

Featuring a durable trackdesign, the new Terex Fuchs

RHL350 E delivers power,performance and efficiency

The new Terex Fuchs RHL350 E material handler.

Terex 15

www.wastehandling.com

Pag

e 15• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

cy. In addition to being more environ-mentally friendly, the new RHL350 Eboasts many design advancements, in-cluding: a more powerful and fuel effi-cient engine; improved hydraulics; moreefficient cooling system; larger cab dis-play and improved magnet operation.

The handler’s durable track designconsists of a heavy duty chain withtriple grouser 23.6-inch shoes. The lowmaintenance design includes planetarygear drive with 10 track and three bear-ing top rollers. Offering a wide 14.0-foottrack stance for stable operation, thenew RHL350 E delivers impressive liftcapacities across its entire 52.5-footreach. Tracks can be retracted to awidth of 11.75-foot for transport. A wellbalanced machine design spreads han-dler weight over the track’s entire 13.8-foot length for a low 55.8 psi groundcontact pressure.

Running cleaner and more efficiently,the new RHL350 E uses a cooled Ex-haust Gas Recirculation (EGR) systemto meet Tier 4i (Stage III B) emissionsstandards. The handler boasts a 214 hpengine, offering 8 percent more poweroutput than the RHL350 D. At the sametime, specific fuel consumption is re-duced by 11 percent. Regeneration ofthe Diesel Particulate Filter (DPF) oc-curs automatically, without impactingmachine performance, and the regener-ation process can be temporarily inter-rupted by pressing an indicator buttonlocated on the control panel. Enginestart/stop is now push button con-trolled to properly manage engine shut-down while under critical load condi-

tions or during DPF regeneration. A new high performance main hy-

draulic pump increases pump capacityby 3 percent. Combined with improvedengine performance, the increased oilflow provides greater handling efficiencyof the RHL350 E. Both the engine andhydraulic system incorporate largercooling systems protected by ventedpanels that provide increased airflow.The engine’s new hydraulically poweredfan is designed to automatically adjustairflow based on operating conditions toprovide an optimal level of cooling.

Hydraulically height adjustable, thehandler’s cab offers a maximum eye lev-el elevation of up to 18.4-foot aboveground level, improving performanceduring loading/unloading procedures.Its cushioned cab elevation system pro-vides absorption of shocks and jolts foroperator comfort.

At 23 percent larger than previous de-signs, the new Wide Video Graphics Ar-ray (WVGA) display includes a higherresolution and higher contrast screenwith an antiglare shield and scratch re-sistant coating. Intuitive controls makefor a short learning curve of RHL350 Eoperation, and the ergonomic multi-function button delivers effortless fin-gertip navigation through the display.

System status and control of thestandard 20 kW onboard generator andmagnet are now incorporated into thecab display for improved efficiency. TheRHL350 E offers four operating modesfor the magnet attachment — small,medium and large parts handling and ajogging mode for sorting.

The new RHL350 E design includesexpanded diagnostic capabilities, soservice technicians can identify andaddress underlying issues. The largecoolers for the engine and hydraulicsystem are lockable and readily acces-sible. A convenient stow away ladderoffers access to the machine’s central-ly located service platform for filterand central lubrication system main-tenance. The handler’s fuel prefilter isnow mounted on top of the fuel tankfor easier servicing.

The new RHL350 E features a stan-dard rearview camera system. Colorvideo of the area behind the machineis visible on the WVGA display, provid-ing an expanded view of the work areaaround the machine. The handler’scontoured counterweight is designed

to protect the camera from damageduring operation.

The new Terex Fuchs RHL350 E ispurpose-built for harsh scrap handlingand recycling applications and incorpo-rates many of the same features foundon previous models that have madeTerex Fuchs an innovation leader. Rigidhydraulic pipes on the stick, boom andundercarriage offer superior protectionfrom wear and damage. Inverted hy-draulic cylinder mounting provides pro-tection during truck and rail car load-ing/unloading and reduces exposure todebris and moisture to improve longevi-ty. Its rugged double row slewing ringdesign disperses forces over two rows ofbearings to improve component servicelife and durability.

Booths 21 & 22

Terex from14

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

16

GRAND PRAIRIE, TEXAS — Vision-aire Inc., an OEM provider of air condi-tioning products, announces the Model7060 low profile roof or wall mountedair conditioning system for heavy dutyoff highway equipment. This rugged airconditioner features a low overall heightof approximately 8-inches, has a pow-der coated steel chassis, and a ratedoutput of 25,000 BTU/hr.

“We were very pleased with the resultsfrom our tests of the 7060,” said BillKerr, Visionaire, Inc. vice president ofproduct development. “It exceeded ourdesign goals for performance with theleast possible impact on overall cabindimensions.”

The 7060’s unique design allows forhorizontal or vertical installation, withvery little space required for mounting.The use of a multi flow condenser re-duces the overall height, while still be-ing able to withstand the abuse in theharshest conditions. The 7060 adds toVisionaire’s growing family of climatecontrol products. It fills a gap betweentheir compact 7000/7100 units and thelarger 7070 systems often found on rail-way equipment.

“When planning for the 7060 we fo-cused on creating an affordable productthat would be as compact as possiblewithout sacrificing the performance andreliability we are known for.” said Frank

Pechacek, Visionaire, Inc. president.“We wanted an OEM quality productthat would be within reach of an enduser or independent A/C shop.”

Forced air cab pressurization and hy-draulic compressor drive are some ofthe options available.

Visionaire Inc., founded in 1994 andheadquartered in Grand Prairie, Texas,designs and markets many cabin venti-lation products for the off highwayequipment market. All of their systemsare made of powder coated steel and aredesigned to withstand use in the offhighway environment.

For details on this product, or to seewhat else Visionaire Inc. has to offer,contact their sales department at 972-647-1056 or e-mail jack@visionaire-inc.com or scotto@visionaire-inc.com,or visit their website at www.visionaire-inc.com.

22x44 andd 4x44 Vehicless too Fitt Yourr Everyy Need

CLUB CAR1-800-CLUBCAR1-706-863-3000

SATCH SALESMenands, NY 12204

518-426-5002

CLINTON TRACTOR& IMPLEMENT, CO.Clinton, NY 13323

315-853-6151

MID-STATE GOLF CARCanton, NY

877-592-4653

XRT’s Are Great For Construction Sites, RecyclingPlants, Composting Facilities,Scrap Metal Yards, Hauling,Moving Materials . . .

Vehicles Available in Electric, Gas & Diesel; With Many Accessories and Attachments To Choose From.

Participating Dealerships of the XRT Give Away

Visionaire Inc. announces new mid-size cab air conditioner

The Model 7060 low profile roof or wall mounted air conditioning system for heavyduty off highway equipment.

The 7060's unique design allows for horizontal or vertical installation, with very littlespace required for mounting

Pag

e 17• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

USED EQUIPMENT SHOWCASEReaching recycling and aggregate industry professionals

across the United States in one easy section.

This section is dedicated to used equipment and auctions ONLY!

Looking for a piece of equipment?Here’s your place to find it!

Looking to sell used equipment?Here’s your place to sell it!

Forr Moree InformationContactt Wendelll Jennings

518-673-0114Lee Publications, Po Box 121, 6113 State Hwy 5

Palatine Bridge, NY 13428

USED EQUIPMENT SHOWCASE

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

18

LC Whitford Equipment Co., Inc.4316 Bolivar Rd.

Wellsville, NY 14895

FOR SALES, PARTS AND SERVICE -1-800-321-3602Web site: www.lcwhitford.com Email: sales@lcwhitford.com

Morbark Timber Pro Rayco Barko Okada

2006 John Deere 648G Series III4x4 Skidder/Grapple - Call for Pricing

2008 Rayco Super RG50, RepoMachine, Only 171 hours!

Call for Pricing

2012 Timber Pro TL735-BNew and Unused Ready for Work!

Call for Pricing

2002 Morbark Mountain Goat 20/36Track Chipper with Loader, CumminsDiesel, Low Hours! - Call for Pricing

2006 Timber Pro 630B FellerBuncher w/ Rolly II Head

Call for Pricing

2012 Morbark Beever M18R Chipper, 213HP Cat, Autofeed, Many Additional Options

Call for Pricing

2000 Bandit 1400 Track Chipper, 14”Capacity, 2143 Hrs, Cab & Loader

Call for Pricing

Morbark M.U.T., Comes with a FREE Stump Splitter too!

Call for Pricing

CHIPPERS20122 Morbarkk Beeverr M15R Cat 142HP, New and Unused! . . . . . . . . . . . . . . . . . . . .Calll forr Price20122 Morbarkk Beeverr M18R,, Cat 213HP, Tandem Axle - Nice! . . . . . . . . . . . . . . .Calll forr Price20088 Moorbarkk Tornadoo 15, 140-HP Deere Diesel, Winch, 1,000 Hrs., Real Workhorse! . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price20066 Morbarkk Blizzardd 12 Auto Feed, Needed TLC and Got it Here! . . . . . . . . . .Calll forr Price20044 Morbarkk Hurricane 18” Chipper, Tandem w/Winch, 180 CAT, Recent Trade In . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price20011 Morbarkk Hurricanee 2400XL 18” Capacity, 180-HP Cummins, Nice Shape! .Calll forr Pricee

STUMP GRINDERSSpeciall Discountss onn Alll Inn Stockk Stumpp Cutterss -- Calll Forr Price!

20122 Raycoo 1645SJRS - New Model - Has Swing Out Panel, 4x4, Blade, Trailer . . Calll forr Price

20122 Raycoo C-1000 LGP,, Forestry Mower, Predator Head, Kubota Diesel! . . . . . . . .Calll forr Price20122 Raycoo 16355 Tracc Jr.,, 35-HP, Go Anywhere Machine, with or without Trailer! . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriceMISCELLANEOUS

Morbarkk “Mutt”” Forestryy Loader, Comes with Grapple & Stump Splitter . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriceFAE,, UML/SSLL 125, mower attachment, used . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriceFAE,, UMMM EXX 125, mower attachment, used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriceRaycoo && Rockland log grapples, used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriceDavco mower attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriiceRotobec grapple with RT252 rotator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr PriceBobcatt LR5A landscape rake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

For Sales, Parts or Service Call 1-800-321-3602 or E-Mail: sales@lcwhitford.com

2012 Morbark 30/36 Track DrumChipper, Get the Job Done Right!

Call for Pricing

Pag

e 19• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Brought to you by:Country Folks,

Country Folks Grower,Wine & Grape Grower,

Hard Hat News, Mane StreamWaste Handling Equipment News,

North American Quarry News,Small Farm Quarterly and by

Lee Publications Inc.Palatine Bridge, NY 13428

www.leepub.com (800) 218-5586

www.aaauctionfinder.com REGISTER FREE!!!Find Auctions Near You!!

Auctioneers Register FREE!!List all your upcoming auctions with us!!

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

20

NEWPORT NEWS, VA — DuaneWilder, president of Liebherr Construc-tion Equipment Co. announced that Mr.Michael Balella (Mike) had joined thecompany in the newly created positionof manager — parts marketing. Thisnew role will work closely with the Lieb-herr dealer organization to further en-hance opportunities to increase salesand improve customer service for aftermarket repair parts. Mike will coordi-nate parts pricing on competitive itemsand add additional product offerings tosupport Liebherr’s market presence in

the United States as a manufacturer ofpremier quality, heavy duty construc-tion equipment.

Wilder stated. “We conducted a na-tional search to find someone thatmet our requirement for experiencefrom both the manufacturer and cus-tomer perspective. Mike’s backgroundin market development and partssales with a competitor who is an in-ternational manufacturer coupledwith his earlier rental and small con-tractor experience well prepare himfor this new role. Mike has a BA from

the University of Connecticut.Bob Bollinger, parts manager will

continue in his present role with re-sponsibility for inventory levels and or-der fulfilment, both report to DuaneWilder, president of Liebherr Construc-tion Equipment Co.

Hans Liebherr established Liebherr asa family business in 1949. The compa-ny’s first mobile tower crane laid thefoundation for its exceptional success.Liebherr is today not only one of the

world’s largest manufacturers of con-struction machinery, but also an ac-knowledged supplier of advanced tech-nical products and services in manyother business sectors. Liebherr has de-veloped into a group of more than 120companies worldwide, employing morethan 35,000 people. The Group’s parentcomapny is Liebherr-International AG,which is based in Bulle, Switzerlandand owned entirely by members of theLiebherr family.

Grinder Sale

Stu 630-986-6018 Darin 309-208-4568

Stewart 517-206-5512 Greg 314-960-0920 Gary 317-509-3278 Financing Available

Year Make Model Hours Price Location Contact2007 Vermeer TG5000 1088 $369,000 Chesterfield, MO Greg2006 Vermeer TG7000 1433 $425,000 Fishers, IN Gary2006 Vermeer TG525 $180,000 Aurora, IL Stu1998 Morbark 1200XL 4290 $98,000 Ft Wayne, IN Gary

(3) Vermeer TG7000’s Call For Price Aurora, IL Stu

2006 Vermeer TG7000 2006 Vermeer TG525 2007 Vermeer TG5000

Summer Deals

Liebherr Construction Equipment Co. introduces Michael Balella

Michael Balella

SOUTHAVEN, MS — Terex announcesa territory expansion for Terex® Fuchsequipment distributor Penn Jersey Ma-chinery, LLC, Lionville, PA. In additionto covering the states of Pennsylvania,Delaware and New Jersey, Penn JerseyMachinery will now offer the full line ofTerex Fuchs material handlers to itscustomers in Maryland and Virginia.Designed for scrap, portside and recy-cling applications, the purpose builtTerex Fuchs product line includes mod-els with operating weights ranging from41,888 to 147,710-pounds and workradii from 27 to 72-feet.

“Penn Jersey is an aggressive TerexFuchs distributor, and they have done

an exceptional job with the product lineover the last five years in Pennsylvania,Delaware and New Jersey,” said ChrisKoch, divisional sales manager for TerexConstruction Americas. “We are confi-dent that they will continue this suc-cess in the new territory. They have al-ready added more team members tosupport the product line and are em-barking on an aggressive demonstrationprogram of their sales, parts and servicecapabilities.”

“We are excited to bring Terex Fuchsequipment to our customers in Marylandand Virginia, and our sales team will bereaching out to make appointments for

Terex expands Penn Jersey Machinery’sTerex Fuchs material handler territory

to include Maryland and Virginia

Terex 21

Pag

e 21• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

face to face introductions ofthe range of material han-dlers in the near future,”mentioned Wayne Don-ahue, Terex Fuchs equip-ment business manager forPenn Jersey Machinery.“Our initial focus will beoperations in the scrap,barge off loading, recyclingand logging industries. TheTerex Fuchs product linesignificantly improves ma-terial handling efficiencyand profitability in these

applications.” In preparation to support

its expanded territory, PennJersey Machinery has hiredtwo additional service tech-nicians, specializing onTerex Fuchs material han-dlers. Exemplifying compa-ny’s dedication to superiorfield support, Penn JerseyMachinery’s service depart-ment guarantees its TerexFuchs customers that atechnician will be on the jobno later than the beginning

of the next business day fora machine down service callduring the warranty periodand within 24 hours for anon-warranty breakdown.“We pride ourselves on thereputation of our 23 factorytrained service technicians,of which 14 are road tech-nicians dispatched daily forfield service support,” saidFrank Przelomiec, servicemanager for Penn JerseyMachinery.

Penn Jersey Machinery

supports its Terex Fuchscustomers from four of-fices located throughoutPennsylvania, New Yorkand New Jersey. Thecompany is currentlystocking new TerexFuchs material handlers,including the recently in-troduced Terex FuchsMHL350 E Blue Evolu-tion machine that offersthe latest handler designadvancements and emis-sions control. The distrib-

utor also maintains alarge rental fleet for itscustomers, which cur-rently includes the TerexFuchs MHL320 D,MHL340 D, MHL350 Eand MHL360 D.

The company offers fi-nancing options for TerexFuchs material handlersthrough Terex FinancialServices. TFS offers awide range of effective fi-nance and leasing solu-tions, structured to com-plement customers’ cashflow and budgets. TheTFS team assists in allareas of asset manage-ment, from the analysisof future equipment val-ues through the disposalof used equipment.

Penn Jersey Machinery’scorporate headquarters islocated at 120 Gordon Dr.,Lionville, PA. For more in-formation call 610-363-9200 or visit www.pennjer-seymachinery.com

Terex Corporation is adiversified global manu-facturer of a broad rangeof equipment that is fo-cused on delivering reli-able, customer driven so-lutions for many applica-tions, including the con-struction, infrastructure,quarrying, mining, ship-ping, transportation, re-fining, energy, utility andmanufacturing indus-tries. Terex reports in fivebusiness segments: Aeri-al Work Platforms; Con-struction; Cranes; Mater-ial Handling and Port So-lutions; and MaterialsProcessing. Terex offersfinancial products andservices to assist in theacquisition of equipmentthrough Terex FinancialServices. More informa-tion can be found atwww.terex.com.

Designed for scrap, port-side and recycling appli-cations, the purpose builtTerex Fuchs product lineincludes models with op-erating weights rangingfrom 41,888 to 147,710-pounds and work radiifrom 27 to 72-feet.

Terex from 20

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

22

Ask anyone. They will tell you that Newton,Massachusetts truly is the garden city because theyhave the leaves to prove it. “We have trees all over theplace here,” says Newton’s Fleet Superintendent RonMahan, whose division oversees more than 500 vehi-cles and pieces of equipment for the municipality.Mahan is responsible for the acquisition of newequipment especially when a specialty item is beingconsidered. Mahan said that one of these specialtypieces that they have acquired in the recent past istheir screening bucket attachment from ALLU®.

The ALLU Bucket is the focal point of this storysince not only does the city of Newton use it, theyrecommend it. How did they even find out aboutALLU? “At the time,” Mahan remembers, “theCommissioner of Public Works, Tom Daley, read anarticle on the ALLU bucket. So we went up and

looked at it, watched how it mulched leaves, anddecided that it would be an asset to the landfill.”

“We take in stuff from our landscapers when theygo out to clean off resident’s lawns,” he said. “Oncethe leaves hit the recycling center, the ALLU bucket isused to mulch the leaves. You have to see this place;it is packed with leaves.”

Elaine Gentile, City of Newton’s director ofEnvironmental Affairs, recalls seeing the bucketdemonstration when they were first consideringpurchasing it. “We saw a demo of the ALLU severalyears ago,” she said. “It had paddles and grindingteeth and we were impressed. When we saw theALLU, we were surprised at how much faster thematerial would break down and produce compost, amuch shorter period.

Before using the ALLU, the brown paper bags (that

the community uses to recycle the leaves) would sortout during composting. Accordingly, it took a longerperiod to compost. We always just turned thewindrows until the material broke down completely.With the ALLU bucket, the material is ground beforeit even gets to the windrows and therefore the mate-rial, including bags, composts faster.”

Gentile notes that they were instrumental in draft-ing composting regulations in the 1980s. “We werethe first community in Massachusetts to start amunicipal compost program in the 1980s,” she said.“At the time, we collected leaves from our own munic-ipal properties. We began allowing Newton landscap-ers to use the facility for six weeks per year in the fall,those with a permit.”

Yard waste was banned from the waste stream in1992 by the Department of EnvironmentalProtection. She said that all residential yard wastewas taken to a composting farm. Turnaround timewas lengthy and they were forever behind in collec-tions. Then in 2009, Newton negotiated a newcontract and decided to bring all residential yardwaste to the city’s closed landfill facility for compost-ing. This saved more than $300,000 annually.

At that time, using the older methods, it took about1-1/2 years to produce compost. “We used it for ourown projects and only screened with a Reed Screen-all,” she recalled. “A few years back, I rented a trom-mel from another community. We screened thecompost, and sold it.”

With the new recycling contract, it was clear thatNewton was going to produce more compost. That iswhen they decided to buy an ALLU screening bucket.They used that one for about one year. Then, theypurchased a second loader along with a second ALLUscreening bucket. When the trommel screeningcontract came up for renewal, the Board of Aldermendecided that renting a trommel was not cost-effectiveso they agreed to buy a trommel for Gentile’s depart-ment. “I take in about 25,000-cubic-yards of materi-al annually,” she said.

“The material is fully composted in less than oneyear and we would like to get that down to 5-6months,” Gentile said. “When we get the yard waste,it is ALLUed (great verb!) and placed in stockpiles.These stockpiles are then turned by a loader intowindrows (approx 15-foot high and 10-foot wide and,depending on space, 75-100-foot long).

Workers take the material’s temperature on a week-

Newton 23

The center's new Doppstadt SM-514 trommel has been an ideal addition to the recycling center's fleet of equipment.

Recycling the Garden CityRecycling the Garden Cityby Steve Wagner

Mark Ferguson (L) and Paul Stevens (R), work together to make the City of Newton Recycling Center runsmoothly.

Pag

e 23• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Newton from 22ly basis and they maintain logs as part of the process.The material is turned according to temperature andmoisture content at the appropriate times, which alsoworks well to kill weed seed. “We may ALLU severaltimes,” Gentile said. “When the material is finishedcomposting, it is screened to 3/4-inches and placedonto 50-cubic-yard trucks.”

“We have a contract with a man who has been inthe business for more than 25 years,” she said. “Hetakes the temps, decides when to turn, when tostockpile, when to cure, and when to screen. He alsodoes growing and soils testing on the product.”

Gentile said that her department gives screenedcompost to residents free and sells to soils manufac-turers, organic nurseries, rooftop gardens andothers. “It is tax subsidized, so we do make somerevenue,” she added.

Large quantities of Newton’s recycled product aresold through a broker. “The material is picked up aswe do not deliver,” notes Gentile. She also says thattwo ALLUs are enough for right now and there is noway to know what they might need in the future.

Newton considers itself, a “Green Community,”which has won numerous awards for its recyclingprogram. They are usually on the cutting edge ofthings. For example, Newton is the first largecommunity in MA to go to automated collection andSSR (Single Stream Recycling). They are also the firstto have a waste oil collection program, and the first tohave a permanent facility that is opened more than21 days a year. Currently, they are investigatinganaerobic digestion as a part of their waste recyclingefforts, because it is “the right thing to do.” “Newtonhas not landfilled any MSW (Municipal Solid Waste)in more than 25 years,” she said.

The ALLU equipment line isdevoted to environmental care,improving recycling methods andthe effective and profitableprocessing of different materialsaccording to their company’s web-site. Allu’s headquarters and fac-tory, is located in Orimattila,Finland where they oversee adistribution network that coversmore than 30 countries world-wide. They have subsidiaries inGermany, France, Sweden, GreatBritain, the United States, Argen-tina and China.

ALLU’s primary product line isthe ALLU Screener Crusher buck-et. This innovative product is aversatile accessory for wheel load-ers, excavators or skid steer load-ers. With the ALLU ScreenerCrusher bucket, you can screen,

crush, pulverize, aerate, blend,mix, separate, feed and load mate-rials all in one process. It handlesmany types of material such astopsoil, black top and dirt, exca-vated and waste soil, contaminat-ed soil, clay, peat, bark, compost,bio-waste, demolition waste, con-struction waste, milled asphalt,glass, coal, oil shale, limestoneand several other materials. TheALLU Screener Crusher canscreen and crush materials from15 mm to 150 mm fragment sizes.

A new and emerging segment oftheir business is their soil stabi-lization system line of equipment.This equipment adds binders tosoft soil types to help stabilizethem for more productive use.Together, these two areas ofexpertise help to make the ALLU

Group a worldwide leader in thistechnology.

It might be noted that the com-pany’s corporate philosophy is tooperate in a way that producesadded value for the customer.ALLU is customer-oriented asthey pioneer new ways of provid-ing quality products. Companyoperations are based on the ISO9001:2000 certificate ensuringthat the functions relating to thedevelopment, marketing andmanufacturing of the company’sworking methods and its equip-ment in the environmental andearthmoving industry, are qualitycontrolled and manufactured atthe highest level. For more infor-mation on the ALLU product line,visit their website atwww.allu.net.

ALLU’s screener crusher bucket is a handy tool for composters

As bagged leaves are placed into the windrows of composting material, workers run it through one of two ALLUbuckets to shred and screen the material.

Mark Ferguson processes material using a Volvo L120Foutfitted with an ALLU screener bucket.

Windrows of composting leaves will provide the community with high quality, composted mulch in just a fewshort months.

Mark Ferguson dumps a load of finished compost intotheir Doppstadt trommel for a final screening beforegoing out to the customers.

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

24

www.whenrecyclingexpo.com

Produced by the Trade Show Division of Lee Newspapers, Inc.; P.O. Box 121, 6113 State Hwy. 5; Palatine Bridge, NY 13428. Publishers of WHEN, NAQN and Hard Hat News

Questions? Call 800-218-5586 or 518-673-0114

Henrietta Dome • Monroe County Fairgrounds2695 East Henrietta Road Henrietta, NY 14467

OOCTOBER24-252012Wed. 9-5 & Thurs. 9-5

Indoor Displays and

LIVE DEMOSRecycling Machinery and Forestry Processing Equipment!

FREE ADMISSION!** $10 Parking Fee

DOOR PRIZES!!Take your door prize ticket to theWHEN Booth for a chance to win!!

Mig WelderCourtesy of

Haun Welding

3/4” MilwaukeeAir Impact

Courtesy of

Quality Craft Tools

1st PRIZE1st PRIZE 2nd PRIZE

Don’t Miss These Exhibitors atthe WHEN Recycling Expo LiveDemo ShowAllu Group Inc • Demo Area 6Apollo Equipment.net, LLC • 24Commonwealth Equipment Corp • 91Conviber, Inc • 29Custom Milling & Consulting • 10D&W Diesel, Inc • 11Dings Company Magnetic Group • 21, 22Emerald Equipment Systems, Inc • 23George & Swede Sales & Service • O-4, O-5Grinder Wear Parts, Inc • 24Hammel New York, LLC • Demo Area 1Hard Hat News • 102, 103, 104, 105Haun Welding Supply, Inc • EKennametal • 76, 77Komptech • O-6Land Improvement Contractors of America (LICA) • 40Liquitube Marketing International • 25Moley Magnetics Inc • CMonroe Tractor • O-1Nextire, Inc • 20Nuwer Auto Parts • 118Quality Craft Tools • ASandvik Construction • Demo Area 2Vermeer • Demo Area 3WHEN • 102, 103, 104, 105

AND MORE!!!

Pag

e 25• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

26

Pag

e 27• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

UTICA, NYØA new hightorque, low speed modelSCC-15-SS Screen Clas-sifying Cutter reduceshard materials and fri-able products into con-trolled particle sizes.

A proprietary rotor de-sign is comprised of cut-ter bits attached to a hel-ical array of staggeredholders called “intercon-nected parallelograms,”that continuously cutand crush oversize mate-

rials against twin, sta-tionary bed knives.

Unlike high shear cut-ters that rotate at highspeeds, the high torquecutter is equipped with adirect coupled, gear re-duced drive that rotatesthe shaft at speeds downto 10 RPM to cut or crushtough materials using lowshear, and/or to mini-mize fines when cuttingfriable materials.

The cutter bits, which

are available in stainlesssteel, tool steel and tung-sten carbide, can be slidonto holders and securedwith one retaining sockethead screw, allowing rap-id replacement.

The SCC-15-SS posi-tions the bits along theentire shaft, with nofrontal gaps, reducingmaterial into uniformpieces with minimumimperfections or fines,and little to no genera-

tion of heat.The new cutter has a

15-inch throat widththat accommodates upto 30 parallelogramswith 60 bit inserts. Per-forations of the bedscreen range from 1/32to 1-1/2-inchs in diame-ter and up to 3-inchessquare, allowing the re-duction of materials intouniform particles in sizesdown to 20-30 mesh.

Material is fed through

the top of an adjustable,double baffled intakechute, or directly into thefront of the chutethrough a hinged door.An independently pow-ered, variable speedpinch roller is offered forhorizontal feeding of ma-terial. Discharge is viagravity, pneumatic tran-sition or independentlypowered belt or screwconveyor.

Applications include adiversity of chemical,mineral, foundry andplastics materials.

Also offered are SCC-10, -30, -48, -60 and -72models with 10.5-inch di-ameter rotors and throatwidths of 10, 30, 48, 60and 72-inches respective-ly. High speed, belt drivenScreen Classifying Cut-ters are offered for highshear cutting of foods,chemicals, minerals,plastics/regrind, foundry

materials, wood chipsand fiberglass insulation.

All are offered in car-bon steel, abrasion re-sistant steel and stainlesssteel finished to industri-al or sanitary standards.

Other size reductionequipment manufacturedby the company includesPin Mills, Rotary LumpBreakers, Attrition Mills,Hammer Mills and Shred-ders. Blending equipmentfor dry bulk materials in-cludes Rotary Batch Mix-ers, Continuous RotaryBlenders, Vee-ConeBlenders, Ribbon/Pad-dle/Plow Blenders, Flu-idized Bed Mixers andHigh Intensity Blenders.

For information contactMunson Machinery Com-pany, Inc., 800-944-6644, e-mail info@mun-sonmachinery.com or vis-it their website atwww.munsonmachin-ery.com.

www.MoleyMagneticsInc.com 716-434-4023 or cell 716-417-2591 Floor Area C

Moley Magnetics has the Work Tools for Scrap & C&D Recyclers.

24v DC Battery Operated MagnetInexpensive, easy installation and low maintenance

No Generator Needed

Grappleswith or without electromagnets. For mate-rial handlers, excavators, mini-excavators,

and knuckle boom cranes

Powerful Mobile Hydraulic Shears

Fixed Pulverizer4 sizes available,

reversed cylinder to protect rod, easy change

teeth, cutting blade

Rotating Pulverizer5 sizes available, reversed

cylinder to protect rod,cutting blade, Oversized

rotation motor

Self Contained Hydraulic Magnets

Easy install on Multiple Machines

With or without rotationfrom 1 to 10 ton size

Highest Quality

Best Prices on the Market

High torque screen classifying cutter

SCC-15-SS high torque, low speed Screen ClassifyingCutter with direct coupled, gear reduced drive reduceshard materials into controlled particle sizes, and re-duces friable materials with minimum fines.

www.wastehandling.com

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

28

Pag

e 29• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

30

Henrietta Dome • Monroe County Fairgrounds2695 East Henrietta Road Henrietta, NY 14467

OFFICIAL HAPPY HOUR SPONSOR

HAMMEL NEW YORKOCTOBER24-252012Wed. 9-5 & Thurs. 9-5

FREE ADMISSION!** $10 Parking Fee

www.whenrecyclingexpo.com

Produced by the Trade Show Division of Lee Newspapers, Inc.; P.O. Box 121, 6113 State Hwy. 5; Palatine Bridge, NY 13428. Publishers of WHEN, NAQN and Hard Hat News

Questions? Call 800-218-5586 or 518-673-0114

Indoor Displays and

LIVE DEMOSRecycling Machinery and Forestry Processing Equipment!

Don’t Miss These Exhibitors...Allu Group Inc • Demo Area 6Apollo Equipment.net, LLC • 24Commonwealth Equipment Corp • 91Conviber, Inc • 29Custom Milling & Consulting • 10D&W Diesel, Inc • 11Dings Company Magnetic Group • 21, 22Emerald Equipment Systems, Inc • 23George & Swede Sales & Service • O-4, O-5Grinder Wear Parts, Inc • 24Hammel New York, LLC • Demo Area 1Hard Hat News • 102, 103, 104, 105Kennametal • 76, 77Komptech • O-6Land Improvement Contractors of America (LICA) • 40Liquitube Marketing International • 25Moley Magnetics Inc • CMonroe Tractor • O-1Nextire, Inc • 20Nuwer Auto Parts • 118Quality Craft Tools • ASandvik Construction • Demo Area 2Vermeer • Demo Area 3

More Coming In !!!

Pag

e 31• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

COMPANY WRENCH4805 ScoobyLane Carroll, OH 43112(P) 740-654-5304 (F) 740-687-9130

Toll Free 866-262-4181

Cleveland, OH Branch525 Golden Oak Pkwy

Oakwood Village, OH 44146(P) 440-439-4567(F) 440-439-1789

Piketon, OH Branch3668 US Route 23 South

Piketon, OH 45661(P) 740-289-3294

Washington, PA Branch400 West Beau St

Washington, PA 15301(P) 724-222-2447(F) 724-22-1118

Indianapolis, IN Branch7019 Brookville Rd

Indianapolis, IN 46239(P) 317-375-7790(F) 317-375-7792

Cookeville,TN Branch1220 Southside Dr

Cookeville, TN 38506(P) 931-526-6222(F) 931-526-2662

Rineyville, KY Branch6300 Rineyville Rd

Rineyville, KY 40162(P)270-360-1010(F)270-360-1050

Aiken, SC Branch1252 Old Kimbill Trail

Aiken, SC 29805(P) 803-642-0060(F) 803-642-0209

Jacksonville, FL Branch4710 Dignan Street

Jacksonville, FL 32254(P) 904-268-6554(F) 904-268-0939

Plant City, FL Branch2812 Airport Rd

Plant City, FL 33563(P) 813-754-5800(F) 813-754-5801

Pasco, WA Branch2300 N Commercial Ave

Pasco, WA 99301(P) 509-728-6614

Vancouver, WA Branch3909 NW Fruit Valley Rd

Vancouver, WA 98660-1278 (P) 360-694-7157

NJ Branch(P) 740-422-6045(P) 609-313-0720

MIDLANTIC MACHINERY2240 Bethlehem PikeHatfield, PA 19440

215-822-0145Fax 215-822-7971

6375 Allentown Blvd.Harrisburg, PA 17112

717-652-3190Fax 717-652-64051261 Highway 315

Wilkes-Barre, PA 18702570-824-9891

Fax 570-824-02681400 Joh Avenue

Baltimore, MD 21227410-247-2100

Fax 410-536-5712

Call Your Dealer Today For More InformationCOMPANY WRENCH

4805 ScoobyLane Carroll, OH 43112(P) 740-654-5304

Toll Free 866-262-4181

Cleveland, OH Branch525 Golden Oak Pkwy

Oakwood Village, OH 44146(P) 440-439-4567

Piketon, OH Branch3668 US Route 23 South

Piketon, OH 45661(P) 740-289-3294

Washington, PA Branch400 West Beau St

Washington, PA 15301(P) 724-222-2447

Indianapolis, IN Branch7019 Brookville Rd

Indianapolis, IN 46239(P) 317-375-7790

Cookeville,TN Branch1220 Southside Dr

Cookeville, TN 38506(P) 931-526-6222

Rineyville, KY Branch6300 Rineyville Rd

Rineyville, KY 40162(P)270-360-1010

Aiken, SC Branch1252 Old Kimbill Trail

Aiken, SC 29805(P) 803-642-0060

Jacksonville, FL Branch4710 Dignan Street

Jacksonville, FL 32254(P) 904-268-6554

Plant City, FL Branch2812 Airport Rd

Plant City, FL 33563(P) 813-754-5800

Pasco, WA Branch2300 N Commercial Ave

Pasco, WA 99301(P) 509-728-6614

Vancouver, WA Branch

3909 NW Fruit Valley RdVancouver, WA 98660-1278

(P) 360-694-7157

NJ Branch(P) 740-422-6045(P) 609-313-0720

MIDLANTICMACHINERY

2240 Bethlehem PikeHatfield, PA 19440

215-822-0145Fax 215-822-7971

Left — We regret that the Zblewski Brothers, LLC's teamphoto was omitted from last month's feature article.Shown in front of their Morbark 6600 Woodhog (fromleft) Roger Zblewski, Dennis Zblewski, Jon Zblewski,Scott Skibba and Jeremy Weber.

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

32 To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.comWASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION

Waste Mailing Address - Waste Handling Equipment News Classifieds,PO Box 121, Palatine Bridge, NY 13428

Number / Classification20 Air Compressors25 Air Tools55 Appraisal Services60 Asphalt Equipment65 Asphalt Recycling70 Attachments80 Auctions85 Backhoe/Loaders

150 Buckets165 Business Opportunities200 Chippers220 Compaction Equipment225 Composting Equipment245 Concrete Products250 Concrete Recycling255 Construction Demolition265 Construction Eq. For Rent270 Construction Eq. For Sale275 Construction Machinery

Wanted300 Conveyors310 Cranes320 Crushing Equipment365 Demolition375 Dozers400 Drills415 Employment Wanted425 Engines430 Excavators470 Financial Services495 For Rent or Lease505 Forklifts535 Generators550 Gradalls555 Graders610 Help Wanted635 Hoists705 Legal Notices745 Loaders760 Lumber & Wood Products780 Maintenance & Repair805 Miscellaneous880 Parts890 Pavers912 Point Of Sale925 Pressure Washers940 Quarry Equipment950 Real Estate For Sale955 Real Estate Wanted975 Rentals

1017 Scrapers1020 Screening Equipment1040 Services Offered1065 Skid Steer Loaders1085 Snowplows1105 Sweepers1120 Tools1130 Tractors1140 Trailers1145 Training1170 Truck Parts & Equipment1180 Trucks1185 Used Equipment1205 Wanted1230 Wood Waste Grinders1235 Wood Waste Recycling

Announcements Announcements

Help Wanted

Lumber &Wood Products

Recycling Equipment

Help Wanted

Lumber &Wood Products

Recycling Equipment

Help Wanted

ADVERTISING DEADLINENOVEMBER ISSUE

Friday, October 5th

If you would like to place aclassified ad - please call Peg at

1-800-836-2888or email classified@leepub.com

EQUIPMENT SALES REPRESENTATIVEChadwick-BaRoss, Inc. is adding to its sales staff in the state of Connecticut. We are

looking for a highly motivated aggressive individual to sell Material Processing Equipmentto include Crushers, Screeners, Grinders and Chippers.

The ideal candidate should possess the following attributes:• Mechanical background• Positive success oriented attitude• Self motivated with strong desire to succeed• Focused on providing exceptional customer service before, during and after the sale• Ability to overcome objections and provide solutions• Maintain professional attitude with customers, co-workers, and management

Compensation package to include:• Base salary plus commission• Mileage reimbursement• Medical and Dental benefits• Product training• 401k plan

Reply to Brenda Masse via email at masseb@chadwick-baross.com

WANTEDANTIQUE TIMBERS

& BOARDSYellow Pine, Cypress,

Fir, Oak.(512) 328-8837

WHAT ITS WORTH, INC.AUSTIN, TX

SORTING TABLESFor C&D - Shingles - Green Waste

Portable or StationaryCUSTOM BUILT

Brad Kiecker 612-889-7883www.kafkaconveyors.com

Wood Waste Grinders Wood Waste Grinders

600HP - John Deere Engine

UR 82 Grinder - Rental Unit Price: $290,000

650HP - Volvo Engine UR 92 Grinder

- Demo UnitPrice: $430,000

E-mail: theco@theco-inc.comPhone: 1-800-776-0335

UNIVERSAL REFINER VERTICAL SHAFT GRINDERS

Announcements

� � � � �

ADVERTISERSGet the best response fromyour advertisements byincluding the condition, age,price and best calling hours.Also we always recommendinsertion for at least 2 timesfor maximum benefits. CallPeg at 1-800-836-2888

CHECK YOUR AD - ADVER-TISERS should check theirads. Lee Publications, Inc.shall not be liable for typo-graphical, or errors in publica-tion except to the extent of thecost of the first months inser-tion of the ad, and shall alsonot be liable for damages dueto failure to publish an ad.Adjustment for errors is limit-ed to the cost of that portion ofthe ad wherein the erroroccurred. Report anyerrors to 800-836-2888 or518-673-0111

Announcements

NEED BUSINESS CARDS?Full color glossy, heavy stock.250 ($45.00); 500 ($60.00);1,000 ($75.00). Call yoursales representative or LeePublications 800-218-5586and ask for Beth or 518-673-0101 bsnyder@leepub.com

Chippers

CHIPPING OPERATION,Morbark 48” 3 knife chipper,70hp 3ph. motor, horizontalfeed, top discharge to 6x6Shaker screen, Fines sawdustblower w/80’ of 8” piping,comes w/chip blower w/10hp3ph. motor, blows chips intochip trailers, $21,000. 607-746-3504

Composting Equipment

FOR SALE: NEW Carry-over7’ PTO compost turner. Pricedfor quick sale. 712-621-6515

Generators

GENERATOR 3406B 350kw,$8,500; air compressor,$1,800. 607-746-3504

Logging Equipment

HMC MODEL AC40 automat-ic mill w/two saw HMC verticleedger, w/Tyrone Berry Feed-works hydraulics, Sawyer cab,3 headlocks, 14’ carriage, 52”F-pattern headsaw, $15,000;500 Newman 4 side planer,w/blower, $13,000. 607-746-3504

Lumber &Wood Products

Parts

TROMMEL BRUSHES

Mfg. By

DUFF BRUSH LLCPowerscreen, Wildcat,

McCloskey, Retech& Others

1-877-863-3319www.duffbrush.com

Real Estate For Sale

SCRAP YARD FOR SALE inSouth Arkansas. Land, build-ings, equipment & inventory.Call 870-314-0155

Services Offered

CANVAS PRINTS: All sizes.Mounted or Unmounted. Justbring in or send us your photoat Lee Publications. Call 518-673-0101 bsnyder@leepub.com

Trailers

2-48’ CHIP TRAILERS, dualaxle, rear door opening,$4,000 each or $7,500 forboth. 607-746-3504

Pag

e 33• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.comWASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION

Waste Mailing Address - Waste Handling Equipment News Classifieds,PO Box 121, Palatine Bridge, NY 13428

OCT 23-25ISRI Board of Directorsand Committee Meeting

The Ritz Carlton, Cleveland,OH.

OCT 24-25Waste Handling Equipment News

Recycling Expo NorthMonroe County Fair-grounds, Henrietta, NY. Con-tact Ken Maring, 518-673-3237. On Internet atwww.whenrecyclingexpo.com

OCT 30-31AEMP s Annual Asset

Management SymposiumLouisville, KY. General infor-mation and details on semi-nars and speakers are avail-able at www.aemp.org/sym-posium. Online registrationis now open. Special earlybird rates apply throughSept. 1 and are $899 formembers, $999 for non-members. Standard fees of$995 for members and$1,150 for non-members gointo effect after Sept. 1. Con-tact Cindy Challis Orr, 970-384-0510 ext. 203 orcindy@aemp.org.

NOV 7Tree Care Industry

Association Expo 2012Baltimore, MD. Pre-confer-ence Nov. 7, Expo Nov. 8-10.Call 800-733-2622expo@tcia.org. On Internetat www.tcia.org.

NOV 12-132012 Southeast Food

Waste Reduction Conference

Hilton University Place,Charlotte, NC. See websitefor more information.. OnInternet at www.cra-r e c y c l e . o r g / f o o d w a s t econference

NOV 13-15ISRI Safety and

Environmental CouncilMeeting

Drury Plaza San AntonioRiverwalk. Contact AnneMarie Horvath, 202-662-8511 or e-mailannemariehorvath@isri.org.

NOV 14-15Canadian Waste &

Recycling Expo 2012Toronto - Ontario (Canada).

JAN 15The Alternative Case Resolution Initiative

(ACRI)Radisson Hotel & ConferenceCenter, Green Bay, WI.$625/person. Contact Cata-mount Consulting, 518-623-2352. On Internet atw w w . c a t a m o u n tconsultingllc.com

JAN 28-31US Composting Council:Annual Conference 2013

Orlando, Florida. The world’slargest conference and exhi-bition for the organics man-agement industry - compost-ing, anaerobic digestion,renewable energy fromorganics, compostable plas-tics, wood waste and organ-ics recycling. Call 301-897-2715. On Internet atwww.compostingcounci.org

MAR 19-21World of Asphalt Show &

Conference and AGG1Aggregates Forum & ExpoSan Antonio, Texas. OnI n t e r n e t a tw w w . a g g 1 . o r g / a n dwww.worldofasphalt.com.

MAR 19-21, 2013World of Asphalt/AGGG1

San Antonio, Texas. The2013 World of Asphalt Showand Conference.

MAR 23-26National Demolition

Assoc. 40th AnniversaryConvention

San Diego, CA. Call 800-541-2412. On Internet atwww.demolitionassociation.com

WASTE HANDLING EQUIPMENT NEWSE-mail announcement of your upcomingevent(s) to: jcasey@leepub.com We mustreceive your information, plus a contactphone number, prior to the deadlinethat's noted under the Announcementsheading on the 1st page of these WHENClassifieds.

* * *

Calendar of Events 5 EASY WAYS TO PLACE AWASTE HANDLING EQUIPMENT NEWS

CLASSIFIED ADMAIL IT IN -

Fill out the attached form, cal-culate the cost, enclose yourcheck/money order or creditcard information and mail to:

WHEN Classifieds,PO Box 121,

Palatine Bridge, NY 13428

3.

FAX IT IN -

For MasterCard, Visa,American Express orDiscover customers, fillout the form below com-pletely and fax to Peggyat (518) 673-2381

2.

1. PHONE IT IN -

Just give Peggy a call at1-800-836-2888

DISPLAY ADS IN THE CLASSIFIEDS ARE $21.00 per column inch,$12.00 second zone. Maximum height 11 inches. No frequency oragency discounts. LINE ADS are one issue, $15.00 for 14 words,50¢ each additional word. All rates are per insertion. Payment mustbe included with your order.

4. E-MAIL IT IN - E-mail yourad to classified@leepub.com

5. ON-LINE - Go towww.wastehandling.com

and follow the PPllaaccee aa

CCllaassssiiffiieedd AAdd button toplace your ad 24/7!

Name: (Print)_______________________________

Company Name:____________________________

Address:___________________________________

City:__________________St.:_____Zip:_________

Phone:_____________________________________

Cell:_______________________________________

Fax:_______________________________________

E-mail:_____________________________________

Payment Method: � AmericanExpress � Discover � Visa � MasterCard

Acct#_______________________Exp. Date______

Signature_____________________Date_________

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!

MM/YY

Required w/Credit Card Payment Only

$15.50

$17.00

$18.50

$20.00

$16.50

$18.00

$19.50

$16.00

$17.50

$19.00

Placing a Classified Ad

Is Only

A Phone Call Away

800-836-2888

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

34

)

Are You Involved In More Than One Industry?We Are Here to Help You.

FFREEE SUBSCRIPTIONSS BYY REQUEST *

Name _______________________________________________

Farm/Business Name ___________________________________

Address______________________________________________

______________________________________________

City________________________ State _____ Zip __________

County ____________________Email _____________________

Phone ( ) _______________Fax ( ) _________________

Date___________Signature______________________________

LEE PUBLICATIONS, INC.PO Box 121, 6113 State Hwy., Palatine Bridge, NY 13428

800-218-5586 • FAX 518-673-2381SUBSCRIPTIONS

888-596-5329email: subscriptions@leepub.com

National Aggregate (bi-monthly)

Regional Heavy Construction (monthly)

TITLE

1 � President/CEO 2 � Manager/Supervisor 3 � OtherNUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2, ETC.

1 Asphalt Paving_____________________ 7 Construction Demolition _________________2 Concrete Paving ___________________ 8 Landscaping __________________________3 Oil & Stone Paving__________________ 9 Land Clearing _________________________4 Bridge Construction ________________ 10 Logging _____________________________5 Excavating ________________________ 11 Other _______________________________6 Utility/Underground _________________

Hard Hat News focuses on heavy equipment construction including excavating, construction/dem-

olition, paving, bridge building, and utility construc-tion in the northeastern third of the United States.

� YES - Send me Hard Hat News!

1 � Crushed stone and sand & gravel2 � Crushed stone3 � Sand and gravel4 � Recycled materials, concrete/asphalt5 � Lime

6 � Industrial minerals7 � Machinery/equipment manufacturer8 � Equipment dealer/distributor9 � Drilling

10 � Blasting

North American Quarry News covers quarries, sand and gravel pits, HMA and ready mix concrete operations in the United States. NAQN provides a

combination of strong editorial and advertising for industry professionals.

� YES - Send me North American Quarry News!

Your company produces these products or services:(Check All That Apply)

Regional Agriculture

� Dairy � Beef � Poultry � Horse � Goat� Sheep � Alfalfa � Corn � Soybeans

� YES - Send me Country Folks!

Business Type: (Check All That Apply)

Our premier weekly agricultural newspaper has four editions covering agriculture from Maine

through North Carolina. Every issue is loaded with national,

regional and local agricultural news,

equipment, service advertising and auctions.

*This publication costs $47 for one year. *This publication costs $78 for two years.

Regional/National Solid Waste Recycling(monthly)

TITLE

� Owner/President/VP � Operations Manager � Other

TYPE OF BUSINESS (Check all that apply)

Recycling professionals involved in the wood waste,C&D, scrap metal, asphalt & concrete, and

compost recycling industries will find Waste Handling Equipment News a valuable source of

new products, product innovation and site adaption.

� YES - Send me Waste Handling Equipment News!

� Construction Demolition Recycling� Construction Demolition Landfill� Woodwaste Recycling/Land Clearing� Composting

� Asphalt/Concrete Recycling� Scrap Metals Recycling

� Ferrous � Non-Ferrous

Paid Subscriptionweekly( )

Regional Horticulture

� YES - Send me Country Folks GROWER!

� Greenhouse � Tree Fruit � Nursery

� Farmers Market� Direct Market� Vegetable

� Small Fruit � Christmas � Garden Center� Supplier

Business Type: (Check All That Apply)

Country Folks Grower is the regional newspaper for all segments of commercial horticulture.

Each issue is filled with important information for the Greenhouse, Nursery,

Garden center, Landscaper, Fruit, Vegetable Grower and Marketers.

*This publication costs $24 for one year.*This publication costs $40 for two years.

Paid Subscriptionmonthly

National Vineyard Paid Subscriptionbi-monthly( )

Wine & Grape Grower offers features, news and informationon growing grapes, and making and selling wines.

Learn tips on how to start or improve your business.

� Grape Grower � Wines� Vineyard � Supplier

Business Type: (Check All That Apply)

Northeast Equine Market (monthly)Mane Stream is a monthly horse publication reaching Maine

to Northern Pennsylvania, and New Jersey.Not only does Mane Stream go to horse owners who request

it, but it goes to all of our Affiliated Horse AssociationMembers.....29 Associations Strong and Growing! In addition,issues of Mane Stream are shipped to tack shops, feed stores,

stables, auction barns, and where horse people frequent.

How Many Horses Do You Have?_____

Pag

e 35• WA

ST

E H

AN

DL

ING

EQ

UIP

ME

NT

NE

WS

EA

ST

• Octo

ber 2012

Oct

ob

er 2

012

• W

AS

TE

HA

ND

LIN

G E

QU

IPM

EN

T N

EW

S E

AS

T •

P

age

36

LANDFILLTRANSFERSTATION

DEMOLITIONCONTRACTOR

WOOD PROCESSING SCRAP YARD

A HAMMEL Shredder can be operated for far less thanany other shredder! (incl. all wear parts, fuel, and fluids)Please contact us today to learn how we can help you make more $$$

631-218-2600info@hammelny.comwww.hammelny.com

Reduce Volume and Increase Density

Lower Up Front Investment -Lower Maintenance Costs than Hammer Mills

Minimal Maintenance Requirements

Demo Area 1 Demo Area 1

Visit Us at Demo Area 1 at theWHEN Recycling Expo in October 2012