Embed Size (px)
Citation preview
Washing MachineOWNER'S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model name and serial number of the set.
Quote this information to your dealer when you require service.
MODELS : WF-T7001(~6)PC(H/P)WF-T7011(~6)PC(H/P)WF-T8001(~6)TC(H/P)WF-T8011(~6)TC(H/P)WF-T7001(~6)PD(E/F)WF-T7011(~6)PD(E/F)WF-T8001(~6)TD(E/F)
WF-T8011(~6)TD(E/F)WF-T9001(~6)TC(H/P)WF-T9011(~6)TC(H/P)WF-T9001(~6)TD(E/F)WF-T9011(~6)TD(E/F)
P roduct Features
Punch + 3 washing action
The punch action's powerful vertical water thrust
combined with the rotating pulsator movement
improves washing performance and reduces tangles.
3 Spinning mini-pulsators create powerful jets of
water which move the laundry up and down in the
drum to ensure your laundry is evenly and
thoroughly washed.
The Turbo Drum washing machine does not operate with the lid open.If the lid is opened during wash, rinse and spin cycles, the machine will stop
automatically.
Fuzzy Logic Control
A built-in load sensor automatically detects and measures the laundry load a
microprocessor optimizes washing conditions such as ideal water consumptionand washing time.
Advanced technology is built into the Electronic Control System which ensures
the best washing result.
Turbo Drum washingWhile the "Punch + 3" pulsator rotates in one
direction, the Turbo Drum rotates in the oppositedirection. This creates an even flow of water in both
the upper and lower parts of the drum, resulting in an
enhanced washing and rinsing action.
Lint Filter
Lint and loose threads from laundry generated
during the washing cycle are caught by the lint
filters for a cleaner wash.
WF-T90/T80 Series : Double Lint Filters
WF-T70 Series : Single Lint Filter
START WASHINGAUTO
POWER
OFF
SENSING
Laundry Sensor
Water Level Sensor
SETTING
OptimumWashingCondition
Auto Restart
In the event of a power failure, the washing machine will automatically resume
its interrupted cycle when power is resumed.
Applied models : WF-T7001(~6)PD(E/F),WF-T7011(~6)PD(E/F)
WF-T8001(~6)TD(E/F),WF-T8011(~6)TD(E/F)
WF-T9001(~6)TD(E/F),WF-T9011(~6)TD(E/F),
C ontents
Introduction
Before Starting to Wash
Washing Programs
Additional Function
Options
Installation
Care and Maintenance
Specification
Troubleshooting
Safety information
Identification of Parts
Function Information
Preparation Before Washing
Use of Water, Detergent, Bleach
and Softener
Special Guide for Stain Removal
Function of each Button
Fuzzy Wash (Normal Wash)
Economy Wash
Blanket Wash
Wool Wash
Soak Wash
Delay Start (Reservation) Wash
Option Washing
Other useful Functions
Placing and Leveling
Connecting Water Supply Hose
Connecting Drain Hose
Grounding Method
Cleaning
Cleaning and Maintenance
Common washing problems
Troubleshooting
Specification
4
5
6
7
8
11
12
14
14
14
14
14
16
17
18
19
20
23
24
25
26
27
28
29
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problemsin the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Introduction
4
S afety information
Attention
Do not put your hands or feet under this
machine.
Do not place any rugs or heavy material
over the power cord.
Since the machine is heavy, a minimum of
two persons should move it.
Do not install the washer where it is
exposed to sunlight, wind, rain, etc.
The appliance must be positioned so that
the plug is accessible
Power
Supplycord
Installation
Maintenance
Make sure the power cord is free of dust
and plug it in properly so that the cord will
not move.
Do not touch the power cord with wet
hands.
Violation of these guidelines could result in serious or fatal injury.
For your better understanding. these precautions are separated into two categories.We urge you to pay special attention to them in the interests of your own safety, and protection of your
machine against damage:
The appliance is not intended for use by young
children or infirm persons without supervision.Do not install the washing machine in a damp place.Keep the washing machine away from fire or heat
source.
Young children should be supervised to ensure that
they do not play with the appliance.The base opening must not be obstructed bycarpeting when the washing machine is installed on
a carpeted floor.
Make sure to ground the earth wire or connect it
to a ground detector after you put the power cord
into an outlet.
When the power cord is loose, do not use it.
Do not damage the power cords.
Do not plug many cords into one outlet at the same
time.
If the power cord or fuse is damaged, it must be
replaced by the manufacturer or its service agents or
similarly qualified people in order to avoid a hazard.
If the appliance is supplied from a cord extension
set or electrical portable outlet device the cord
extension set or electrical portable outlet device
should be positioned so it is not subject to splashingor ingress of moisture.
Following these guidelines will protect your machine against damage.
Operation? Do not press the buttons with sharp objects.? Check the hose connection and open the tapbefore activating the machine.
? Do not pour more than 50˚C(122˚F) water
into the tub.
? Do not wash any waterproof materials.
When you take out the laundry, be careful not to
fall into the washer.
Do not put hands into the rotating tub.
Do not sprinkle water over the buttons.
Make sure the lid is closed during operation of the
spin cycle.
Do not put heavy objects on the machine.
Unplug the cord when the machine is not in use.
? Do not pour corrosive materials or bleach
over the washing machine. It will cause
damage to the power cord or the machine.
? Never disassemble or remodel the washer
and power cord by yourself. Only a
qualified technician should work on the
machine.
Caution
Caution
Attention
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
WARNING!
Introduction
I dentification of Parts
5
Drain hose Anti-rat cover (option)Water supply hoses
or
oror
1 Each for cold and
hot water
Body
Accessories
Part can be different according to the model.
Note
Water supply hose(1 EA or 2EA)
Bleach dispenser
Adjustable leg
Power cord
Lint filter
Drain hose
for pump model
Drain hose for
non pump model
control panel
Inner tub
Powder detergent box
Softener inlet
()
()
()
Introduction
6
Function InformationOur machine provides various washing methods which suit various conditions and
types of laundry.
Other washing methods
Different types of laundry washing
Use this Program for normal clothes except for woolen clothes and lingerie.The sensor automatically detects the quantity of laundry and selects the appropriate water level, wash
power, washing time, rinsing time and spinning time. (refer to page14)
Blankets of different size can be easily washed.
(refer to page14)
Delicate clothes (lingerie, wool etc.) which may be easily damaged can be washed. (refer to page14)
Fuzzy (Normal) Wash
Blanket Wash
Wool Wash
Economy wash can be selected to wash lightly soiled clothes of less than 3.0 kg in a short time. (refer to page14)
Economy Wash
Soak Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt
and grime. (refer to page14)
Soak Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the operation.
Delayed Start washing can be set according to preference. (refer to page16)
Delay Start (Reservation) Wash
Spin, Rinse/Spin, Rinse, Wash/Rinse, and Wash only options can selected. (refer to page17)
Option Wash
Before Starting to WashPreparation Before Washing
7
? Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,
pens, coins, and keys can damage both your washer and your clothes.
? Mend any torn garments or loose buttons. Tears or holes may become larger during washing.? Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
? Pretreat any dirt and stains.
? Make sure the clothes are washable in water.
? Check the washing instructions.
? Remove tissue in pockets.
To get the best results, different fabrics need to be washed in different ways.
? SOIL (Heavy, Normal, Light) Separate clothes according to the type and amount of soil.
? COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.
? LINT (Lint producers, Collectors) Separate lint producers and lint collectors.
Lint Producers Terry cloth, Chenile, Towels, Nappies, DiapersLint Collectors Synthetics, Corduroy, Permanent Press, Socks
WIRE
Sorting
Check before Loading
* Look for a care label on your clothes. This will tell you about the fabric content of your garmentand how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, water temperature and spin speed.
Care Labels
Use nylon nets for long, delicate items. For laundry with long strings or long length ,a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and
wash them in a small amount of water. If the laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
Light and Large-sized clothing
Long laundry items
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).Load Size
The water level should just cover the clothes. Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Loading
? Pretreat shirt collars and cuffs with a pre-wash product or liquid detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.? Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
(For more detail refer to page11)
Pretreatment on stains or heavy soil
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any typeof oil on it (including cooking oils).Doing so can result in death, explosion, or fire.
WARNING
Before Starting to Wash
8
Use of Water, Detergent, Bleach and Softener
X-LARGE
LARGE
MEDIUM
SMALL
WATER.DETERGENT
D
T
? The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaningresults. We recommend temperatures of:
- HOT 49~60°C...(120-140˚F) White items, diapers, underclothing and heavily soiled, colorfast items.
- WARM 29~40°C...(85-105˚F) Most items
- COLD* 18~24°C...(65-75˚F) Only very bright colors with light soil.
? When washing in cold water additional steps may be needed:
- Adjust detergent amount and pre-dissolve detergent in warm water
- Pretreat spots and stains
- Soak heavily soiled items
- Use appropriate bleach
*Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Using Detergent
Detergent
Follow the detergent package directions. Using too little detergent is a common cause of laundry problems.Use more detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing the right detergent
We recommend the use of domestic detergent, (powder, liquid or concentrated). Soap flakes or
granulated soap powders should not be used in your washing machine. When washing woolens
remember to use detergent suitable for washing woolens.
Water temperature
Using Water
? The machine sets the appropriate temperature automatically according to the wash program .
? You can change the water temperature by pressing the WATER TEMP button.
? This machine detects the quantity of laundry automatically, then sets the water
level and proper amount of detergent.? When you select a wash program, the water level and amount of detergent (to be used)will be shown on the control panel.
? The following table shows the amount of water.
? When the water level is automatically detected, it may differ depending on the quantity of laundry even
though the same water level is indicated on the control panel.? The amount of a cup in the diagram is about 40g for concentrated detergent.
Amount of Water Level
(refer to p12)
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for severe cases.
9
Using Detergent
How much detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.The correct amount of detergent will vary depending on the amount of soil in your clothes (Jeansand work cloches may need more detergent, while bath towels usually need less.).For liquid and concentrated detergents, follow the recommendations of the detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
water. Lots of foam may look good, but it does not contribute to cleaning your clothes. No
foam means not enough detergent has been used; soil and lint can settle back on the clothes or
the washing machine.
If excess detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
Adding the detergent
Open the detergent dispenser and deposit the appropriateamount of detergentwhere you deposit the detergentPowder Detergent dispenser.Some detergents MUST be fully dissolved before
adding to your machine to get the best wash results.
Check the instructions on the detergent packet.If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water
before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Where you
deposit the
detergent
Powder Detergent Box
()
? Check clothing care label for special instructions and separate the
laundry to be bleached
? Dilute liquid chlorine bleach.
? Measure the recommended amount of liquid bleach carefullyfollowing instructions on the bottle.
? Before starting the washer, pour measured amount of bleach directlyinto bleach dispenser. Avoid splashing or overfilling. Powderedbleach should be mixed with water before pouring.
Using Liquid BleachBleach dispenser
()
Never pour undiluted liquid bleach directly onto clothes or into the wash basket.
This may cause change of color or damage the laundry.Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can reduce
a toxic gas which may cause death.
Do not pour powdered bleach into bleach dispenser.
Before Starting to Wash
10
se of Water, Detergent, Bleach and SoftenerUUsing Fabric Softener
If you wish to use fabric softener we recommend
Attention
Do not mix with detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric softener dispenser.
? Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like
oil stains.
? Measure and add the recommended amount of fabric
softener into the compartment marked with this smbol( ).Follow manufacturer's direction. Fabric softener is
automatically dispensed in the final rinse.
Do not overfill. The dispenser hold max 35mL.
Never add more than 35mL.
Overfilling can cause early dispensing of the fabric softener
which could result in stained clothes. A cup with a pouring spout will help you avoid spilling.
? The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manuallyput during the time when the washer beeps several times before the final rinse. This function informingcorrect time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Scrud(Waxy Build up)
Softener dispenser ( )
or
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasantsmell in your washer.
? Using fabric softener sparingly.? When filling the dispenser, do not splash or overfill.
? Clean dispenser as soon as the cycle is finished.
? Clean your machine regularly. (refer to page 26)? Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
wash e.g. every 5th wash should be at least a warm one.
? Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a
build-up.
Before Starting to Wash
11
Special Guide for Stain Removal
? Remove stains promptly.? Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
? To pretreat stains, use a prewash product, liquid detergent, or a paste made from
granular detergent and water.
? Use cold water on unknown stains because hot water can set stains.
? Check care label instructions for treatments to avoid on specific fabrics.
? Check for colorfastness by testing stain remover on an inside seam.
? Rinse and wash items after stain removal.
For successful stain removal:
Follow fabric care label
instructions
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
? Read and comply with all instructions on stain removal products.? Keep stain removal products in their original labeled containers and out of children's reach.
? Thoroughly wash any utensil used.
? Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
? Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.? Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
WARNING
Stain Removal
STAIN
Adhesive tape, chewing gum,rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,alcoholic beverages)Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellowdiscoloration
Shoe polish
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using cold water and bleach safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using bleachsafe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaningfluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, applynonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Washusing hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denaturedalcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badlymildewed fabrics may be permanently damaged.Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent andnonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleachsafe for fabric.
TREATMENT
Before Starting to Wash
12
F unction of each Button
STRONG
NORMAL
GENTLE
EX-LARGE
LARGE
MEDIUM
SMALL
WATER.DETERGENT
HOUR
MIN.
DELAY
TIMELEFT
HOT
COLDWARM
Water temperature button (option)
Delay Start (Reservation) button
? Use to set a delayed finishing time.
? The time increases when the button is pushed.? The following settings are indicated as the
button is pushed 3 4 5 ...11 12 14
16 ...46 48 3 HOUR.
? To cancel delay time, turn the power switch off.
Water level button
(indication of detergent amount)
? Use to adjust the water level as required. The appropriateamount of detergent is shown next to the water level in
the WATER-DETERGENT diagram? Water level is automatically selected for fuzzy (normal)
program.
The following settings are indicated as the button is
pushed LARGE EX-LARGE SMALL
MEDIUM LARGE
(refer to page 16)
Use to select water temperature.
Pressing the button allows you to select
Cold Warm (Hot&Cold) Hot
Cold respectively. Default setting is Cold.
Process button
? Use to select SOAK,
WASH, RINSE and
SPIN functions as
desired.
Wash power button
? Use it to adjust the strength of
water current
? Power option selections light upin sequence as follows
NORMAL STRONG
GENTLE NORMAL
? Adjustment can be made while
washing
Note
The control panel may differ according to different models
Before Starting to Wash
13
FUZZY
ECONOMY
BLANKET
WOOL
SOAK
WASH
RINSE
SPIN
UR
IN.STARTPAUSE
AUTO OFF
Time left, Delay Start (Reservation), Alarm indication
? Time left - During operation, the remaining time is indicated.
? Delay Start indication (Reservation) - When delay start (reservation)
program is selected, it indicates the finishing time. (RES.=DELAY)
? Alarm indication -When an error occurs, an error message appears to
indicate the abnormality. For example, indicates that the lid is
open.
Child lock function
Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the PROCESS and
PROGRAM buttons
simultaneously and to unlock
push them one more time duringthe washing process.
Start/ Pause button
? Use to start or pause the
washing process.? Repeats start and pause by
pushing the button.
? The power goes off
automatically 10 minutes
after stopping.
(refer to page 18)
AUTO OFF
(Power) button
? Use to turn the power on or
off.
? Push again and power goes
on or off
? The power goes off
automatically about 10
seconds after the wash is
finished.
Program button
? Use for selecting wash program.? This button allows you to select 4 different programs
for different kinds of laundry and dirtiness.
?
program selections light up in sequence as follows:
FUZZY (NORMAL) ECONOMY BLANKET
WOOL FUZZY (NORMAL) etc. Select the desired
program by pressing the button.
Washing Programs
14
Washing Programs
WashingPrograms
Add
the
laundry
Add
the detergent
Fuzzy Washing
(Normal Wash)Used for normal loads, this mode
automatically selects the most
appropriate conditions andcompletesthe sequence in one
operation. The built-in sensor
detects the size of the load and theideal wash power and wash, rinse
and spin times are set accordingly
EconomyWash
Use this mode when washing lightlysolided clothes for a short time. The
weight should be under 3.0kg.
Blanket Wash
Use blanket program when washingBlankets of different sizes
Soak Wash
Use this mode for washing
excessively dirty laundry by soakingin water for some time to remove
proteins and fats. 'SOAK' mode can
be used with all washing programs
simultaneously except for 'WOOL
& ECONOMY' program.
AUTO OFF
1
1
1
1
1
2
5
4
5
5
6
3
3
3
4
2
2
2
2 3
Select the
ECONOMY
program on
the Control
panel.
Add the appropriatequantity of detergent asindicated by the water
level next to WATER-
DETERGENT.
Or follow the detergentmanufacturer's
instructions
Select the
Blanket
program on the
Control panel.
Spread the
blanket
evenly in
the tub
Select the
WOOL
program on
the Control
panel.
SOAKwill not
work in WOOL
& ECONOMY
Program.
Keep pressing the PROCESSbutton until the SOAK light ison and then WASH,RINSE, SPIN lights are on simultaneously.If necessary, select the desired washing processfrom
(SOAK+WASH+RINSE+SPIN), (SOAK+WASH+RINSE),(SOAK+WASH) manually.
SOAK
WASH
RINSE
SPIN
Wool Wash
Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only "water washable" clothes)Before washing your woolenscheck
the care label for the washinginstructions.
(wash only water washable clothes)
Use neutral detergentappropriate for the
laundry.When washingwoolensuse a mild
detergent recommend-ed for washing wool.
Washing Programs
15
Close the lid Finish Caution & Note
The pulsator rotates for 8
secondsto detect the
laundry load.
Then the water level and
the amount of detergent to
be used will be shown and
water will be supplied.
Water will be suppliedfor 2 minutes after the
start of the wash to
supplement the waterthe laundry has
absorbed.
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
If water isalready in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level can
be set low.
Changesto water temperature (hot/cold) and
wash level are possible during operation.
(refer to page 12)
Never wash electric blankets.
Use a nylon net for washing cashmere blankets
to prevent them floating out of the tub.
Never wash carpets in the washer.
Water may splash out when washing lightlaundry such asa cashmere blanket or bed
sheet with water set at high level.
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
3 5 6
7
8
7
7
6
6
6
7
4
4
5
4
When setting the water level manually, do not
set to MEDIUM to prevent damage to laundry.
Washing with hot water may damage the
laundry (Water isset to cold automatically).Ensure that the load is under 2kgIn order to avoid damage to laundry,the spin cycle may appear slow.
This also avoidswrinklesand clothing may still
contain some water. This is normal.
Soak Wash cannot be selected for the Wool
Wash program.
Additional Function Options16
D elay Start (Reservation) Wash
3
AUTO OFF
Delay Start (Reservation) Wash is used to delay the finishing time of the operation.The hours to be delayed can be set by the user accordingly.The time on the display is the finishing time , not the start time.
When you press the START/PAUSE button the light will
blink.
Select the program for laundry on the Control panel.This method will not work in Wool Program.
How to set the delay time.
Example : It's 7 a.m. now. If you'd like your wash to finish at 9
p.m. set the time as in the figure below.
When you push the button the reservation time changes 3 4 5
...12 14 16 ... 48 3 repeatedly.
Press the POWER button to turn power on.
Press the PROGRAM button to select the washing program.
Add the laundry and press the START/PAUSE button.
Press the DELAY START (Reservation) button to set the time when the
delayed washing is to be completed.
The appropriate quantity of detergent marked next to the
water level of WATER-DETERGENT.
When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid
Add the detergent.
Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.Close the lid.
The washing will be finished according to the delayed time.
To select washing program, spinning time, water level or hot/cold manually, press the Delay Start
(RESERVATION) button and select the desired option. Then press the START/PAUSE button.
Finish
When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program . (The laundry will be wrinkled if left for a long time after spinning.)
Note
If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
1
2
4
5
6
HOURDELAY
MIN.TIMELEFT
(RES.=DELAY)
Additional Function OptionsOption Washing
17
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set
manually
Press the AUTO OFF (Power) button to turn power on.
Press the PROCESS button until above Option Washinglight is on. (refer to page 13)
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options
Add the laundry into the washing tub.
Press the START/PAUSE button.
Press the WATER LEVEL button, to control the water level according to the
amount of laundry. If you do not choose anything, it is set the LARGE water
level automatically.
Add the detergent and close the lid.
AUTO OFF
(refer to page 12)
1
2
3
4
5
6
? When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be
drained off, If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button .
? If you do not specify the water level, then Medium will be automatically selected.
? If only Rinse is selected, the process will start from Water Supply.
Note
18
ther Useful FunctionsO
Additional Function OptionsAfter all washing conditions are set according to the manual.
Press the POWER button.
Press the START/PAUSE button to start washing.
During the wash program, all the buttons are locked
until washing is completed or until the child- lock
function is deactivated manually." "
and the remaining time will be displayed
alternately in child-lock mode.
Press both the PROCESS button and the PROGRAM button simultaneously.
Turn Power on.AUTO OFF
If you want to use the washing machine without alarm signal sounds, press both the WATER LEVEL and
PROCESS buttons simultaneously.To make buzzer work, press both the WATER LEVEL and PROCESS buttons simultaneously one more
time.
If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.
If you want to unlock during wash, press both the PROCESS and the PROGRAM button simultaneously
again.
Child Lock Function
Mute Option
Although the machine will not work during a power failure or if power is interrupted, when power is resumed,
it will start again automatically from the point in the cycle when it stopped
applied models : WF-T7001(~6)PD(E/F),WF-T7011(~6)PD(E/F)
WF-T8001(~6)TD(E/F),WF-T8011(~6)TD(E/F)
WF-T9001(~6)TD(E/F),WF-T9011(~6)TD(E/F)
Auto Restart
How to Lock
How to Unlock
2
1
3
Placing and Leveling
19
Installation
Caution
Top view of the machine
more than 10cm
more
than
2cm
more than
2cm
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm to the
right side and left sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10cm is
suggested.
Check that the machine is level
Open the lid and look from above to see if it is
same as shown.
Adjustable legs
Leveling the machine
Lift the front of the washing machine and twist
the Adjustable Leg until the washing machine is
placed evenly.
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
1
2
3
SETTING SCREW
Anti-Rat Cover
Installing the Anti-Rat Cover (option)Insert the anti-rat cover to be firmlyfixed from the back of washingmachine and screw it (1pcs)
20CInstallation
Before connecting the Water Supply Hose to the water tap, check the hose type and
then choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make
sure to connect the blue inlet hose to the cold water tap, and the orange inlet hose to
the hot water tap.
Connecting Water Supply Hose to water tap
Connector
Connector
Water
Supply Hose
screw
Untighten the screw
Untighten the screw of the connector so that the
tap can be placed in the middle.
Fixing the connector to the tapPush the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Attach the water supply hose connects securelyto the connector
Push the water supply hose vertically upwards so
that the rubber seal within the hose can adhere
completely to the tap.
Check the connection of water supply hose and the connector
After connecting the hose, open the tap to check
for any water leakage.If the connection leaks, close the tap and start
again from step 1
Fixing the connector to the water supply hose
Attach the water supply hose to the connector and
then tighten it by screwing it to the right.
Normal Type (Normal tap without thread & screw type inlet hose.)
1
2
3
4
5
onnecting Water Supply Hose
Rubber packing
21
Installation
Rubber packing
Rubber packing
Fixed sticker
screw
Guide plate
Connector
Connector
Fixed sticker
Middle
Connector Middle
Connector
Water Supply Hose
Pressing rod Pressing handle
Connector
Middle
connector
Fixed Sticker
Pressing Handle
Pressing Rod
Water Supply Hose
Separate Middle connector from Water Supply Hose
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Fixing Connectors to the TapPush the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Fixing Upper Connector and Middle Connector
Remove the fixed sticker in between the Upperand Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
Connecting Middle Connector and Water Supply Hose
Press down the pressing rod of the Water SupplyHose which was separated from middle connector
(refer to Step1) and then join it to the middle
connector.
Normal Type
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate. Then follow step1.
In case tap is too large.
Note
Check for water leakageAfter connecting the hose, open the tap to check
for any water leakage.If the connection leaks, close the tap and start
again from step 1.
If you skip step 1, water leakage may occur.
(Normal tap without thread & one touch type inlet hose.)
1
2
3
4
5
6
22
onnecting Water Supply HoseC
InstallationAttach the water supply hose to the tap.Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Connect the water supply hose to the tap.Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
Check water leakage.After connecting the hose, open the tap to check
for any water leakage.
Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turningthe hose connecting part.
Check to see if there is a rubber seal inside
the connector.
Screw Type
Water Supply Hose
Rubber Packing
Hose connector
Rubber seal
Water
tap
Connecting Water Supply Hose to the machine
1
2
3
Connecting Drain Hose
23
Installation
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Fit the machine end of the drain hose to the outlet
of the drain pump and tighten the clamp.
Pump Model
HoseGuide
0.9~1.2mDrain Hose
Within 50mm
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose guide.The discharge height should be approximately 0.9 ~1.2m from the floor.
Note
Before connectingEnsure that the hose clip is set as indicated here.
Connect the Elbow Hose
Push the elbow hose toward the body of the
washing machine.
Non-Pump Model
Place the Drain Hose
To change the direction of the hose, pull out the
elbow hose and change the direction.
Repeat Step2.
Clip
Put the other end of the drain hose over the standpipe or
wash tub.
1
2
1
2
3
24
rounding MethodG
Care and MaintenanceEarth wire should be connected.
If the earth wire is not connected, there is possible a danger of electric shock
caused by the current leakage .
Grounding Method with Ground insert space Terminal
Other Grounding Method
If the AC current outlet has a ground terminal, then
separate grounding is not required. Note that AC
power outlet configurations may differ from countryto country
Connect the ground Wire to the socket provided
exclusively for Grounding.
If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician
Ground Terminal
Outlet with ground terminal.
Ground Wire
Ground Copper Plate
Ground
Wire
Short-circuit
breaker
? To prevent a possible explosion, do not connect ground to a gas pipe? Do not connect ground to telephone wires or lightning rods. This may be dangerous during electrical
storms
? Connecting ground to plastic has no effect
? Ground wires should be connected when an extension cord is used.
Using Ground Wire
Using a Short Circuit Breaker
Connect the Ground Wire to a Ground CopperPlate and bury it more than 75cm in the ground.
Burying Copper Plate
Caution
75cm
25
Cleaning
Care and MaintenanceWhen water supply into the tub is not clean or the filter is clogged with particles(Suchas sand), clean the filter in the inlet valve occasionally.(The figure of power cord and
water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
To Clean the Lint Filter
Turn the net inside out
to clean the filter and
rinse it with water.
Pull out the lint filter from
the tub in the direction
shown below.
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Close the tap before turning off the
power.
Select both hot/cold and then press the
[START/PAUSE] button to remove
water from the machine completely.
After removing the water
supply hose pull out the filter.
Then use a brush to clean
the filter.
Turn off the power before
pulling out the cord.
Replace the filter after cleaning it.
Before cleaning the filter, the impurities in the water supply hose should be removed.
Caution
1 2
1 2 3
3 4
Note
? If the lint filter is torn or damaged, purchase a new one from LG service center.
? Check if water leaks after reassembling. (The Rubber ring is in the cap)
To Clean the Pump casing (for pump model)
(Bottom view) (Bottom view)
Unfasten 4 screws of the
back cover.
Reassemble the cap to
the arrow direction and
fasten it.
Self-cleaning function(for pump model)In the initial stage of every washing machine process, the drain pump works for 3~5seconds to pump out
water with dirt from the washing tub. It helps to keep the wash tub clean and improve pumping ability.
1 2 3
Caution
Turn the cap as shown in
diagram and unfasten it.
Remove foreign objects such
as pin, button, coin, etc
26
Care and Maintenanceleaning and MaintenanceC
Wash Inner-tub Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid detergent, then rinse. (Donot use harsh or gritty cleaners.)
Inlet Hoses Hoses connecting washer to faucet should be replaced every 5 years.
Exterior Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with
sharp objects.
Long Vacations Be sure water supply is shut off at faucets. Drain all water from hoses if weather will
be below freezing.
When there is a fear of freezing
If frozen
? Remove the water supply hose, and immerse it in hot water at approx.. 40˚C.
? Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
? Connect the water supply hose to the water tap and confirm that the washing machine performs the
supply and drainage of water.
? Close the water taps and remove the Water Supply Hose.
? Remove the water which remains in the water supply.? Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
Cleaning the Inside of your Washer
If you use fabric softener or do regular cold water washing, it is very important that you occasionally clean
the inside of your washer.
? Fill your washer with hot water.
? Add about two cups of a powdered detergent that contains phosphate.? Let it operate for several minutes.
? Stop the washer, open the lid and leave it to soak overnight.? After soaking, drain the washer and run it through a normal cycle.
We do not recommend that you wash clothes during this procedure.
TroubleshootingCommon washing problems
27
Many washing problems involve poor soil & stain removal, residues of lint and
scum, and fabric damage. For satisfactory washing results, follow these
instructions.
WASH PROBLEM
Possible CausesProblems Solutions & Preventive Measures
? Use correct amount of detergent for load size, amount of
soil and water hardness.
? Use warm or hot water for normal soil.
Different water temperature may be required according to
soil type. (refer to page 8)? Reduce load size.
? Wash with Jean or Soak(Turbo) & Jean wash cycle for
heavy soiled laundry.? Separate heavily soiled items from lightly soiled ones.
? Pretreat stain and heavy soil according to directions shown
on page 7.
? Rub the stain with bar soap. Wash.
? Do not overfill fabric softener dispenser and do not pour
liquid fabric softener directly onto fabric.
See page 10 for more instructions.
? Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)? Use correct amount of detergent for load size, amount of soil
and water hardness.
? To restore discolored load of whites, use rust remover safe
for fabric.
? Install nonprecipitating water softener or an iron filter in
your water supply system for an ongoing problem.? Before washing, run water for a few minutes to clear lines.
? Wash lint givers eg towels, flannelette sheets, separatelyfrom lint collectors eg synthetic fabrics and remove tissues in
pockets before wash. See page 7 for sorting and caringbefore loading.
? Do not overload the washer
? Do not overload the washer.
? Some detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.? Increase water temperature using hot water safe for fabric.
? Use proper amount of detergent.
? Never pour chlorine bleach directly on fabric.
See page 9 for adding liquid bleach.
? Fasten zippers, hooks, and buckles.
? Remove objects in pockets. See page 7 for caring before
loading.? Do not overload the washer.
Poor soil
removal
? Not enough detergent? Wash water temperaturetoo low.
? Overloading the washer
? Incorrect wash cycle? Incorrect sorting? Do not pretreat stain
? Undiluted fabric softener
dispensed directly onto
fabric
? A buildup caused by the
interaction of fabric
softener and detergent can
flake off and mark clothes
? Not enough detergent
? Iron or manganese in
water supply, water pipes,or water heater
? Incorrect sorting? Tissues left in pocket? Overloading the washer
? Overloading the washer
? Undissolved detergent? Use too much detergent
? Incorrect use of chlorine
bleach.? Unfastened zippers,hooks, buckles
? Ribs, tears and broken
threads? Overloading the washer? Degradation of fabric
Blue Stains
Holes, tears,or snags
Black or graymarks on
clothes
Yellow or
brown rust
stains
Lint
Residue or
detergent
Troubleshooting
28
roubleshootingT Before calling for service check the problem against the list belows.
Symptom Error Message Check up
Is the water tap shut off?
Is the water supply cut off ?
Is the tap or water supply hose frozen ?
Is the water pressure low or is the filter of the inlet
valve clogged with impurities?
Is Hot/Cold selected to Hot when the hose connected
is Cold?
Is the Cold hose connected to Hot?
Drainage Failure
Water Supply Failure
Is the drain hose positioned correctly?Is the drain hose bent or placed too high?Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
Check if electric power has gone off.
Spin Failure
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Is the laundry evenly balanced?
Is the washing machine placed on a flat surface?
Is the lid closed?Door(Lid) Open
Internal sensingfailure
Power failure
Overflow failure
Please call your nearest LG Electronics service center
for help.
SpecificationSpecification
29
H
D
W
WF-T7001(~6)PC(H/P/D/E/F),WF-T7011(~6)PC(H/P/D/E/F)
WF-T8001(~6)TC(H/P/D/E/F),WF-T8011(~6)TC(H/P/D/E/F)
WF-T9001(~6)TC(H/P/D/E/F),WF-T9011(~6)TC(H/P/D/E/F)
42 kg
590(W)x606(D)x928(H) WF-T7001(~6),T8001(~6),WF-T9001(~6)
590(W)x606(D)x958(H) WF-T7011(~6),T8011(~6),WF-T9011(~6)
30 -800 kPa (0.3 -8 kgf /cm2)
Model
Weight
Size
Water tab pressure
emoM
P/No.: 3828EA3003R
