-
Membangun Warnet ADSL Speedy dengan Mikrotik RB750
Konfigurasi Interface Mikrotik
Klik menu Interface
-
Lalu ganti nama interface default Mikrotik RB750
Interface port 1 dan port 2 ganti namanya :
Port 1 : ToModem
Port 2 : ToSwitch
[admin@MikroTik] > /interface print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU
0 R ;;; Interface ke Modem
ToModem ether 1500 1526
1 R ;;; Interface ke Switch
ToSwitch ether 1500 1524
2 ether3-local-slave ether 1500 1524
-
3 ether4-local-slave ether 1500 1524
4 ether5-local-slave ether 1500 1524
Konfigurasi IP Address
Klik menu IP > Address
Masukkan IP Address ke Interface ToModem : 192.168.1.2/24
Ulangi langkah diatas untuk IP Address ke Interface ToSwitch :
192.168.0.1/24
-
[admin@MikroTik] > /ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 192.168.1.2/24 192.168.1.0 192.168.1.255 ToModem
1 192.168.0.1/24 192.168.0.0 192.168.0.255 ToSwitch
Konfigurasi Gateway
Klik menu IP > Routes
Set gateway ke IP Modem 192.168.1.1
-
[admin@MikroTik] > /ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m -
mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 192.168.1.1 1
1 ADC 192.168.0.0/24 192.168.0.1 ToSwitch 0
2 ADC 192.168.1.0/24 192.168.1.2 ToModem 0
Konfigurasi DNS Server
Klik Menu IP > DNS
-
Set DNS Primary : 203.130.208.18, Secondary DNS :
203.130.196.155
[admin@MikroTik] > /ip dns print
servers: 203.130.208.18, 203.130.196.155
allow-remote-requests: yes
max-udp-packet-size: 512
cache-size: 2048KiB
cache-max-ttl: 1w
cache-used: 6KiB
Konfigurasi NAT
Klik menu IP > Firewall
Cek secara default sudah ada NAT Masquerade
-
[admin@MikroTik] > /ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; default configuration
chain=srcnat action=masquerade out-interface=ToModem
Konfigurasi DHCP
Membuat IP Address Pool
Klik menu IP > Pool
New IP Pool
Address : 192.168.0.100 192.168.0.254
Set DHCP Network
Klik Menu IP > DHCP Server
-
Klik Tab Network > +
[admin@MikroTik] > /ip pool print
# NAME RANGES
0 default-dhcp 192.168.88.10-192.168.88.254
1 DHCP-WARNET-POOL 192.168.0.100-192.168.0.254
Set DHCP Server Aktif
Klik tab DHCP > +
[admin@MikroTik] > /ip dhcp-server network print
-
# ADDRESS GATEWAY DNS-SERVER WINS-SERVER DOMAIN
0 ;;; DHCP WARNET LAN KABEL
192.168.0.0/24 192.168.0.1 203.130.208.18
203.130.196.155
[admin@MikroTik] > /ip dhcp-server print
Flags: X - disabled, I - invalid
# NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP
0 X default ToSwitch default-dhcp 3d
1 FAROU... ToSwitch DHCP-WARNET-POOL 3d
Selesai.
Untuk pengaturan bandwith kita pakai teknik PCQ, bandwith akan
dibagi rata ke setiap client. Misal
kita pakai bandwith Speedy 2 Mbps dengan 10 klien aktif maka
akan dibagi 2Mbps/10. Apabila hanya
1 klien yang aktif maka seluruh bandwith akan dipakai oleh 1
klien.
Masuk ke terminal :
Copy paste skrip dibawah
/ip firewall mangle add chain=forward src-address=192.168.0.1/24
action=mark-connection new-
connection-mark=WARNET-CM
-
/ip firewall mangle add connection-mark=WARNET-CM
action=mark-packet new-packet-
mark=WARNET-PM chain=forward
/queue type add name=download-pcq kind=pcq
pcq-classifier=dst-address
/queue type add name=upload-pcq kind=pcq
pcq-classifier=src-address
/queue tree add name=DOWNLOAD parent=ToSwicth queue=download-pcq
packet-mark=WARNET-
PM
/queue tree add name=UPLOAD parent=ToModem queue=upload-pcq
packet-mark=WARNET-PM
Referensi :
http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples
