Wall Panel & Cladding (631) 750-3000€¦ · Wall Panel System • System Features • Reveal Options • Corner & Perimeter Trim Options • Glass Wall Panel System 43 43 45 48 51

Wall Panel & CladdingInstallation Hardware

Monarch Metal 1700 Ocean Ave Ronkonkoma, New York 11779 (631) 750 3000 [email protected]

(631) 750-3000www.monarchmetal.com

HPL RAIN SCREEN CLADDINGMeteon by TRESPA

Architect: Contor Müller SchlüterInstaller: Bernd Siwonia Gmbh

Exposed FastenerThermally IsolatedRivet Type Fastener

CONCEALED FASTENER CLADDING – LIMESTONEJacqueline Vito LoRusso Alumni Ctr, Buffalo StateCannan, Alexander & ScottHOLT ArchitectsRevette StudioJaven Construction

Concealed FastenerThermally IsolatedUndercut Anchor

WEB-19

Stainless SteelCladding System

Stone CladdingBlind (Concealed) Systems for Cladding Installation

Ceiling Panel Installation System

MFCEIL-HMFCEIL-S

Ceiling PanelCeiling Panel

For typical interior ceiling installations to minimize the drop from the wall

For installations in regions with seismic concerns

CeilingCeilingCeilingCeiling

1.5” 3.375”

PANEL IS LOCKED IN PLACE WITH MOVEMENT RESTRICTED IN ALL DIRECTIONS

(Page 22-23)

(Page 48)

(Page 49)

NEW PRODUCT

Architectural Metals

- 03 -

CONTENTS

Architectural Metals

04

08141622

Monarch Z ClipPanel Hanging Systems

• Standard Z Clips

• Stainless Steel Systems

• Specialty Z Clips

• Ceiling System

53 • Concealed Bracket & Railing Options

24

25263541

Monarch Easy Wall Panel System

• System Features

• Reveal Options

• Corner & Perimeter Trim Options

• Glass Wall Panel System

43

43

45

48

51

Cladding • HPL Phenolic Systems

• Stone, Fiber Concrete & Cement Systems

• Stainless Steel Systems

• HPL Plankboard Panels

65

67687072

Standoffs

• Aluminum Standoffs

• Stainless Standoffs

• Standoff Barrels

• Standoff Hardware

73

748591

ARCHITECTURAL METALS

• Angle: Aluminum, Stainless and Steel

• Channel: Aluminum, Stainless and Steel

102

103104

CORNER GUARDS & KICK PLATES

• Stainless Steel & Aluminum Corner Guards

• Stainless Steel & Aluminum Kick Plates

• Flat Bar: Aluminum, Stainless and Steel

Overview ....................................................05

Choosing the Correct Monarch Hanging System ................... 07

Standard Monarch Z Clips ...................08

Stainless Steel Monarch Z Clips ......... 14

Specialty Z Clips ...................................... 16

Ceiling System ......................................... 22

SYSTEMS

5(631)750-3000 www.monarchmetal.com

Monarch Metal has provided the fastest and easiest method to mount wall panels, signs, art work and more for close to 25 years.

The key advantages of the Monarch Z Clip system are:

• Simplicity of installation

• Strength and security of the mounting

• No visible screws or nails on the surface of the mounted panel

MO

NA

RC

H Z

CL

IPS

Overview

6 (631)750-3000 www.monarchmetal.com

For a typical 8’ high x 4’ wide panel, customers mount the continuous lengths along the wall at 3 different heights parallel with the floor. These are secured to studs at 16” on center or to blocking at 8”on center. The shorter panel clips are secured to the back of the panel every 12-15” horizontally.

To match fastener locations on the panel with those on the wall a single template can be used or one can use a story pole. Installation of the panel is accomplished by simply dropping the panel onto the continuous lengths mounted along the wall.

For a video of an installation, please visit our web-site at MonarchMetal.com

Monarch recommends a #8 Pan Head thread screw for attaching the shorter panel clips to the back side of MDF or particle board panels, and stocks these in 1/2”, 5/8” and 3/4” lengths.

The important constraint to remember for using the Monarch Z Clip system is that the height of the head of the screw must be less than .125” for our standard Monarch Z Clips.

MO

NA

RC

H Z

CL

IPS

Overview

.125”

DIM4plus

DIM4any

2 E

QU

AL

DIM

4”1 7/8”

4”dim


MO

NA

RC

H Z

CL

IPS

Choosing the Correct Monarch Hanging System


MO

NA

RC

H Z

CL

IPS

MF375 ClipFeatures

Monarch Z Clip system for hanging interior panels where the installer desires a 3/8” length of engagement

1/2” clearance required between the top of the panel and the ceiling

6063-T6 Aluminum

MF375 Clip1

1/4” Projection

3/8’’ Lift off 2” Length

Material

Stock Clip Size

Stock Continuous Length

Custom Lengths Available

Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

3/8 Inch

1/4 Inch

Same Day Shipping

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel.

(2) The “Projection” is the distance that the panel sits out from the wall.

MF375

1

MONARCH

Standard Z Clips

Standard Applications

3/8” Lift Off

1/4” Projection

FEATURES


Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

3/8 Inch

1/4 Inch

Same Day Shipping



MF375

MO

NA

RC

H Z

CL

IPS

MF375 Even ClipFeatures

In line holes for 50% increase in panel processing speed

32mm hole spacing for line boring equipment

6063-T6 Aluminum

1/4” Projection

3/8’’ Lift off 2” Length

MONARCHSpecialty Clip with In-Line

Holes

Standard Z Clips

Alternative Clip for MF375

3/8’’ Lift Off

1/4’’ Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

Standard Z Clips

MF625 ClipFeatures



6063-T6 Aluminum


5/8” Lift Off

3/16” Projection

FEATURES

MF625 Clip1

.200” Projection

5/8 Lift off 1 1/2” Length

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

1 1/2 Inch

72 Inch, 144 Inch

Any

5/8 Inch

3/16 Inch

Same Day Shipping



MF625

1

MONARCH


MO

NA

RC

H Z

CL

IPS

MF250 ClipFeatures



6063-T6 Aluminum

MF250 Clip1

1/4” Projection

1/4 Lift off 2” Length

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

1/4 Inch

1/4 Inch

Same Day Shipping



MF250

1

MONARCH

Standard Z Clips

Applications With Limited Clearance Above Panel

5/8” Lift Off

1/4” Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

MFSTR-050 ClipFeatures

High strength aluminum system compatible with up to a 3/8’’ hex bolt


6063-T6 Aluminum

Easily used for mounting on concrete block or other difficult materials

Ø.250 THRU x2

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

7/16 Inch

1/2 Inch

Same Day Shipping



MFSTR050

MFSTR-050 2” Clip

MFSTR-050 Continuous Length

1 2

1

2

2.000

(Available in lengths up to 144”)

.437

1.500

.500.125

Standard Z Clips

High Strength Applications

7/16” Lift Off

1/2” Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

MFSTR-1125 ClipFeatures

Heavy duty adjustable height system for mounting curtain wall in exterior applications

Easy adjust bolt on clips for minor height adjustments

Easy fit engagement for locating

3/4” clearance required above the panel

6063-T6 Aluminum

Compatible with heavy duty hex bolts up to 3/8” for additional strength

Perfect for mounting on concrete block or other difficult materials

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

1.5 Inch

144 Inch

Any

5/8 Inch

1 1/8 Inch

Same Day Shipping



MFSTR-1125

1/4” x 20 Hex Bolt for Minor Height Adjustments

MFSTR-1125 System

1 2

1

2

1.125

Ø.250 THRU

2.625

2.000

1.49

.750

1.5001.145

(Available in lengths up to 144”)

Standard Z Clips

Cladding Applications

5/8” Lift Off

1 1/8” Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

Heavy DutyStainless Steel ClipsFeatures

High strength, corrosion resistant stainless steel material makes these perfect for use in exterior wet or harsh environments


Available in 304 Stainless Steel and 316 Marine Grade Stainless Steel

Same simple engagement mechanism as our original Monarch Clips

1/4” Projection

3/4” Lift off1 1/2” Length

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Stainless Steel

1 1/2 Inch

48 Inch

Any

3/4 Inch

1/4 Inch

Same Day Shipping



MFSS HD Clips

Heavy Duty MFSS Clip

1

1

MONARCH

Stainless Steel Hidden Fastening Systems

High Strength Corrosion Resistant Applications

3/4” Lift Off

1/4” Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

Stainless Steel Systemwith 1” ProjectionFeatures

High strength, corrosion resistant stainless steel material compatible with up to a 3/8” hex bolt


304 Stainless steel

1” projection for building envelope applications

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Stainless Steel

3 1/2 Inch

48 Inch

Any

3/4 Inch

1 Inch

Same Day Shipping



MFSSCHAN

MFSSCHAN Bracket

MFSSCHAN1 2

1

2

.75

1.00

.063

1.00

Stainless Steel Hidden Fastening Systems

High Strength Corrosion Resistant Applications

3/4” Lift Off

1” Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

MFTH-625Features



6063-T6 Aluminum

.250” Projection

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

5/8 Inch

1/4 Inch

Same Day Shipping



MFTH-625

MFCUSTOM-625MFTH-625

Wall

Panel

MONARCH5/8 Lift off

2” Length

Specialty Z Clips


5/8” Lift Off

1/4” Projection

FEATURES


MO

NA

RC

H Z

CL

IPS

MFEXT-1250Features

Monarch Z Clip system for hanging interior panels where the installer desires a 1 1/4” or 1 3/8” projection


6063-T6 Aluminum

1.25” Projection

7/8” Lift off

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

Mates with MFTH-625 or MFPROJ-375

120 Inch

Any

7/8 Inch

1 3/8 Inch or 3/8 Inch

Same Day Shipping



MFEXT-1250

Specialty Z Clips


Lift Off Varies

1/4” Projection

FEATURES

MFPROJ-375

Panel

MFEXT-1250Wall

Shlm

120” Length


Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

Mates with MF-EXT1250

Any

5/8 Inch

1 3/8 Inch or 3/8 Inch

Same Day Shipping



MFEXT-1250

MO

NA

RC

H Z

CL

IPS

MFPROJ-375Features

Monarch Z Clip system for hanging interior panels where the installer desires a 1 3/8” projection


6063-T6 Aluminum

3/8” Projection

Specialty Z Clips


Lift Off Varies

1 3/8” Projection

FEATURES

MFPROJ-375

Panel

MFEXT-1250Wall

Shlm

5/8” Lift off

2” Length


Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

Mates with MF375-2 Clip

120”

Any

5/8 Inch

7/16 Inch

Same Day Shipping



MFPROJ-438

MO

NA

RC

H Z

CL

IPS

MFPROJ-438Features

Monarch Z Clip system for hanging interior panels where the installer desires a 7/16” projection


6063-T6 Aluminum

7/16” Projection

5/8” Lift off

120” Length

Specialty Z Clips


Lift Off Varies

1 3/8” Projection

FEATURES

Panel

MF375

MFPROJ-438

Wall

Shim


Monarch Z Clip system for hanging interior panels where the installer desires to use a high strength, undercut anchor

1/2 inch clearance required between the top of the panel and the ceiling

Undercut anchors, such as the Keil Undercut anchors often have centrical pull fracture loads of more than 750 pounds* when properly installed

Undercut anchors have been utilized with TAKTL panels, GFRC panels, high-pressure laminate, terracotta and stone

6063-T6 Aluminium

*Fracture loads vary widely depending upon the material

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

7/16 Inch

1/2 Inch

Same Day Shipping



MFSTR050

MO

NA

RC

H Z

CL

IPS

MFSTR-050 for Undercut AnchorFeatures

Ø.365 HEX THRU

.525

1.000

2.000

1/2” Projection

7/16”Lift Off

Specialty Z ClipsApplications Requiring Undercut Anchor

7/16” Lift Off

1/2” Projection

FEATURES

MFSTR-050-2 Custom (9mm Hex Hole)

Keil Undercut Anchor

Panel

Shlm

Wall


Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

3/8 Inch

.293 Inch

Same Day Shipping



MFTAPE

MO

NA

RC

H Z

CL

IPS

MFTAPEFeatures

Easily used for mounting phenolic, ACM, aluminum, mirrors and glass panels

Each 1 ft of clip is rated for 7.5 pounds of shear strength using a 5x factor

Suitable for interior and exterior applications (examples in 3M design guide)

1/2” clearance required between top of the panel and the ceiling

6063-T6 aluminum

(2) strips of 3M VHB architectural panel tape pre-applied for peel and stick application

Pairs with MF375 clip for material savings

Redesign of clip to optimize adhesion with tapes

Clip can also be purchased without 3M tape for use with your preferred vendor of glazing tape

.250

3.375

Available in StockLength of 144”or Cut to Size

.375

1.260

1.260

Hidden Fastening System with 3M High Strength Tape

For Glass, HPL & ACM Panels

3/8” Lift Off

1/4” Projection

FEATURES

5 mm Panel

0.063” Thick Tape

MFTAPE Bracket

MF375 Clip

1

2

1

2

MONARCH


Interlocking clips prevent movement of the panel vertically and horizontally

Removable

Manufactured from 16 Gauge Galvanized Steel

Available in stainless steel

4 interlocking clips are mounted on the back of the panel and 4 interlocking clips are mounted to the ceiling

Material

Stock Clip Size



Availability

16 Ga. Galvanized

1 1/2 Inch

Mates with itself

Any

Same Day Shipping

MFCEIL-H

MO

NA

RC

H Z

CL

IPS

MFCEIL-H Ceiling Systemfor Typical Conditions

Features

Ceiling Systems - Typical Conditions

Ceiling Panel

CeilingCeiling

1.5”


Ceiling Panel

CeilingCeiling

3.375”

Interlocking clips prevent movement of the panel vertically and horizontally

Removable

Manufactured from 16 Gauge Galvanized Steel

Available in stainless steel

4 interlocking clips are mounted on the back of the panel and 4 interlocking clips are mounted to the ceiling

Material

Stock Clip Size



Availability

16 Ga. Galvanized

1 1/2 Inch

Mates with itself

Any

Made to Order

MFCEIL-S

MFCEIL-S Ceiling Systemfor Seismic Conditions

Features

MO

NA

RC

H Z

CL

IPS

Ceiling Systems - Seismic Conditions

02 ....................................... serutaeF metsyS

Reveal Options .......................................... 21

Corner & Perimeter Trim Options ...... 26

Glass Wall Panel System ....................... 29

MONARCH EASYWALL PANEL SYSTEM

PATENT PENDING

www.monarchmetal.com/products/easy-wall-panel-system/

MONARCH EASYWALL PANEL SYSTEM

Reveal Options .......................................... 26

System Features ....................................... 25

Corner & Perimeter Trim Options ...... 35

Glass Wall Panel System ....................... 41

PATENT PENDING


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMEasy Wall Panel System Features

WallFastener

PanelFastener

Panel

HorizontalReveal

MF375 Clip

BottomEdge Trim

Wall

Top EdgeTrim

Shim

• Ships from stock

• Anodized in clear, black and custom colors

Fast & simple installation

centered around the intuitive

Monarch Z Clip System

Horizontal Reveals & Edge

Trim to be punched with

slotted holes for adjusting

into place after mounting.

PATENT PENDINGCeiling

1

2 2

1

Metal Stud

Base


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM Narrow Reveal

0.1875"

MF375Clip

Wall

.75"Panel

Horizontal Reveal

3/4’’ Panel: EPS-H075-N

3/8’’ Panel: EPS-H039-N

0.1875"

.75"Panel

Vertical Reveal

3/4’’ Panel: EPS-V075-N

3/8’’ Panel: EPS-V039-N

NARROW REVEAL

Reveal Thickness 3/16”

Compatible Panel Thickness

3/8”, 3/4”

Finishes Clear, Black, Custom

Standard Length 144”


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMLinear Reveal

LINEAR REVEAL



3/4”

Finishes Clear, Custom


0.125”

MF375Clip

Wall

.75"Panel

0.125

.75"Panel

Horizontal Reveal

3/4’’ Panel: EPS-H075-L

Vertical Reveal

3/4’’ Panel: EPS-V075-L


Horizontal Reveal

3/4” Panel: EPS-H075-R

3/8’’ Panel: EPS-H039-R

Vertical Reveal

3/4”’ Panel: EPS-V075-R

3/8’’ Panel: EPS-V039-R

1/16"

3/4"Panel

Wall

MF375Clip

1/16"

3/4"Panel

MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM Recessed

RECESSED REVEAL



3/8”, 3/4”




MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMNarrow Channel

NARROW CHANNEL



3/8”, 3/4”



Horizontal Reveal

3/4” Panel: EPS-H075-NC

3/8’’ Panel: EPS-H039-NC

Vertical Reveal

3/4”’ Panel: EPS-V075-NC

3/8’’ Panel: EPS-V039-NC

3/8"

3/4"Panel

MF375Clip

Wall

3/8"

3/4"Panel

WA

LL


Horizontal Reveal

3/4” Panel: EPS-H075-WC

3/8’’ Panel: EPS-H039-WC

Vertical Reveal

3/4”’ Panel: EPS-V075-WC

3/8’’ Panel: EPS-V039-WC

1"

3/4"Panel

WA

LL 1"

3/4"Panel

MF375Clip

Wall

MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM Wide Channel

WIDE CHANNEL

Reveal Thickness 1”


3/8”, 3/4”




MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMCaptured

CAPTURED



3/8”, 3/4”

Finishes Clear, Black, Stainless Anodized,

Custom


Horizontal Reveal

3/4” Panel: EPS-H075-C

Vertical Reveal

3/4”’ Panel: EPS-V075-C

5/16" Wall

3/4"Panel

Clip

5/16"

3/4"Panel

WA

LL

3/8’’ Panel: EPS-H039-C 3/8’’ Panel: EPS-V039-C

MF250


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM 1/2” Captured

1/2” CAPTURED



3/4“



Horizontal Reveal

3/4” Panel: EPS-H075-C50

Vertical Reveal

3/4”’ Panel: EPS-V075-C50

.50" .50”

MF375Clip

Wall

.75"Panel


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMProud Reveal

PROUD REVEAL



3/4”



Horizontal Reveal

3/4’’ Panel: EPS-H075-P

Vertical Reveal

3/4’’ Panel: EPS-V075-P

.25"

.25"

.75"Panel

.75"Panel

.25”

.25”

Wall

MF-375 Clip


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM Concave Reveal

CONCAVE REVEAL



3/4“



Horizontal Reveal

3/4’’ Panel: EPS-H075-B

.25”

MF375Clip

Wall

Horizontal Reveal

3/4’’ Panel: EPS-H075-B

.25”

MF375Clip

Wall

Side View Top View

Vertical Reveal

3/4’’ Panel: EPS-V075-B

Vertical Reveal

3/4’’ Panel: EPS-V075-B

.25"

.75"Panel


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMCorner & Perimeter Trim Options

Outside Corner

Top EdgeTrim

VerticalEdgeTrim

VerticalReveal

Bottom Edge Trim

HorizontalReveal

VerticalRevealsInside

Corner

EdgeTrim

OutsideCorner

Edge Trim

3/4”’ Panel: EPS-ET075-N

Edge Trim

3/4”’ Panel: EPS-ET075-RD

3/8’’ Panel: EPS-ET039-N


Corner & Perimeter Trim Options

MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM

Edge Trim

3/4’’ Panel: EPS-ET075-C50

3/8’’ Panel: EPS-OC039-N

Edge Trim3/4’’ Panel: EPS-ET075-L

Outside Corner

3/4”’ Panel: EPS-OC075-N

Edge Trim

3/4”’ Panel: EPS-ET075-C

3/8’’ Panel: EPS-OC039-N

3/8’’ Panel: EPS-OT039-C


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMCorner & Perimeter Trim Options

Outside Corner

3/4”’ Panel: EPS-OC075-SQ

Outside Corner

3/4”’ Panel: EPS-OC075-RD

Outside Corner

3/4’’ Panel: EPS-OC075-SM

Outside Corner

3/4”’ Panel: EPS-OC075-C3/8”’ Panel: EPS-OC039-C

3/8”’ Panel: EPS-OC039-RD


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM Corner & Perimeter Trim Option

Outside Corner

3/4’’ Panel: EPS-OC075-P

Outside Corner

3/4’’ Panel: EPS-OC075-C50

Outside Corner

3/4’’ Panel: EPS-OC075-SM

Inside Corner

3/4”’ Panel: EPS-IC075-N


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EMCorner & Perimeter Trim Option

Outside Corner

3/4’’ Panel: EPS-OC075-SP25

Outside Corner3/4” Panel: EPS-OC075-L

Outside Corner3/4” Panel: EPS-OC075-SP25


MO

NA

RC

H E

AS

Y W

AL

L P

AN

EL

SY

ST

EM Color Options

Anodized Finish Options

Powder Coat Finish Options

Clear Anodized(Standard)

Mirror Anodized (1)

for a sample. (1) Minimum runs apply in many cases. Please call for availability & pricing.

Black Gold Brushed Stainless (1)

TIGER RAL Interior & Exterior(188 Colors Options)

TIGER RAL Stellix Metallic &

(75 Colors Options)

TIGER Drylac RAL Essentials(101 Colors Options)

(1) (1)


WA

LL

PA

NE

L S

YS

TE

MS

Glass Wall Panel System

Installs with the Easy Panel System except the Glass Panels are attached using the MFTAPE product that uses 3M VHB Tape

All of the same reveal options as the Easy Panel System, including narrow, recessed, narrow channel and wide channel

Features

0.063”Thick Tape

MFTAPEBracket

GlassPanel

The glass wall panels are attached using the

Monarch MFTAPE System


WA

LL

PA

NE

L S

YS

TE

MS

Glass Wall Panel System

www.monarchmetal.com- 32 - (631)750-3000

work seamlessly with rainscreens. Our

Overview .................................................... 32

Exposed Fastener System ...................36

Concealed Fastener System ............... 37

CLADDING

painCentro Cultural Ca Don JoséCanals, S

Hector Luengo ArquitectosRainscreen façade clad with Trespa

HPL Phenolic System ........................... 44

Stone, Fiber Cement &Concrete Systems .................................. 45

Stainless Steel Systems ........................ 48

HPL Plankboard Panels ......................... 51

Concealed Bracket & Railing Options .................................... 53

CLADDING

Trespa Chile-TS400 Cladding SystemMicrosoft Building, Santiago, ChilePhotographer: Christian Barahona

painCentro Cultural Ca Don JoséCanals, S

Hector Luengo ArquitectosRainscreen façade clad with Trespa


CL

AD

DIN

G

HPL Phenolic Systems

CULTURAL CENTRE CA DON JOSÉCanals, SPAINRAINSCREEN FAÇADE CLAD WITH TRESPAARCHITECT: HECTOR LUENGO ARQUITECTOS

Typical Systems

Thermally Isolated Systems

Vertical Rail

Vertical Rail Horizontal Rail

Exposed Fastener oncealed Fasteners


Exposed Fasteners Concealed Fasteners

Back ventilated and drained rain screen systems

Excellent performance and color retention in the sun and rain

Scratch and impact resistance

Easy maintenance

Features

C

C

s

s


CL

AD

DIN

G

Stone Systems

Jacqueline Vito LoRusso Alumni & Visitor CenterLocation: Buffalo State Cannan, Alexnder & ScottHOLT Architects Revette StudioJaven Construction

Typical Systems


Vertical Rail





Concealed and exposed façade / rain screen panel installation systems

Solutions for with stone, limestone, marble, granite, porcelain and quartz

Systems compatible with a variety of undercut anchors (Keil, Fischer) and other solutions

Solutions for thin veneer stone on honeycomb panels

Features

Cs

Cs


Location : Allston, MAPanel Area : 7,392 ft² (686m²)Texture : Reeds, Rough 2, SmoothColor : WhiteArchitect : Shepley BulfinchContractor : Pre-Fab by: NRB IncInstallation by : Sweeney Drywall Finishes CorpInstallation : Rainscreen assemblyFasteners : Color-matched, surface SFS Face Screws

Typical Systems


Vertical Rail





CL

AD

DIN

G

Fiber Concrete


Solutions for Ultra High Performance Concrete, Glass Fiber Reinforced Concrete and other manufactured stone

Systems compatible with a variety of undercut anchors and other solutions

Features

Cs

Cs


CL

AD

DIN

G

City Square MortselArchitect : Abscis ArchitectenProject Year : 2014EQUITONE [tectiva] facade material

Typical Systems


Vertical Rail





Fiber Cement


Solutions for fiber cement panel installations

Systems compatible with a variety of fasteners including color matched exposed fasteners, concealed undercut anchors and concealed rivet type anchors

Features

Cs

Cs


CL

AD

DIN

G

Concealed fastener mounting system

Available in 304 and 316 stainless steel

Rail available in lengths up to 10’ in 11 Ga. and 16 Ga. stainless steel

Clips can be drilled to accommodate various fasteners for connecting the clip to the back side of the panel, including high strength, undercut anchors

Can be manufactured with 2 holes or 1 hole per clip

Clips offered with a panel height adjustment mechanism

Undercut anchors, such as the Keil Undercut anchors often have centrical pull fracture loads of more than 750 pounds* when properly installed

Undercut anchors have been utilized with TAKTL panels; GFRC panels, high-pressure laminate, terracotta and stone *Fracture loads vary widely depending upon the material

Stainless Steel - Exclusively Available

at MonarchMFSTR-SSCLAD Concealed Fastener SystemFeatures

Stainless Steel Concealed Fastener Rail & Bracket


CL

AD

DIN

G

Honeycomb / Sandwich Panels with Stone Veneer

Patented fastening system to securely install honeycomb panels in ventilated rain screen applications

Panel bracket designed so that the bracket is flush with the back of the panel

Adjustable system from Specialinsert is suitable for any kind of material (honeycomb, foam) and thickness

Features

High Performance for Structural Applications

Simple, Easy Installation

Secure installation through the combination of a threaded insert ready to receive a bolt

Properly installed anchors can hold up to 100 KG

100Kg

Bore a cylindrical or hexagonal hole suitable for accommodating the

Screw the tool intothe andexecute the deformation

Deform-Nut®

Insert the into the hole and activatewith the fitting tool

On removal of the toolthe is readyto receive the screw

Deform-Nut®

Deform-Nut®Deform-Nut®

12

34


CL

AD

DIN

G

GFRC Insert System

2.52” 1.0000”

1.0000” 2.0000”

0.2500”

0.1250”0.1250”

1.10”

2.52”

1.250”

110-000 J Channel MFSTR-LW1250-RAIL

MFSTR-LW1250-1.5ADJ

MFSTR-LW1250-1.5ADJ

1.500”

Top-down view Section view

MFSTR-LW1250-1.5ADJ

MFSTR-LW1250-RAILSheating

Panel

Concealed fastener attachment system for GFRC panels in back ventilated rain screen applications with the Monarch MFSTR-LW1250 System

Cast in place insert from various sources embedded in the GFRC panel during the casting process

Zinc and Nylon inserts available

Cast in Place Inserts for GFRC


Outer Corner Squar uter Corner Ope ent Screen

MFPLANK-PHEN-313x2.25MFPLANK-PHEN-313x1.5Section View

1.000"

0.055”

0.128”

1.688”

1.500”

Ø 0.203”

Ø 0.203”(X2)

2.250”

CL

AD

DIN

G

HPL Plankboard Panels

Progressive install plankboard system designed for HPL panels but customizable to others

1 Inch air space behind the panel

Vent screen and hat channel available

Features

O Ve n


CL

AD

DIN

G

Hybrid Aluminum / WHS (Wood Hybrid System)

Geolam is manufactured in Japan and has been available in North America market for the past nine years.

Zero Color-fade - What you see today, is what you will see in 30 years.

Zero moisture - without moisture in the boards the mold and mildew cannot grow.

Zero maintenance - no need to seal cut ends at installation, no follow-up maintenance needed. Stains can be removed with light sanding.

10-year non-prorated warranty

Features

Office in Andrimont, Louvers, BelgiumArchitect: Beck ArchitectTeak, Iroko Color


Undercut Anchor Rail & Brackets (Keil)

For concealed anchor installations using Keil Undercut Anchors

Rail & Bracket for HPL Phenolic Panels

Concealed anchor installations for HPL Phenolic Panels

For concealed anchor installations using Fischer Undercut Anchor

Heavy Duty Rail & Bracket

½’’ Projection Keil Anchor System

Concealed fastener rail and bracket for Keil Anchors with

a ½’’ Projection

For concealed anchor façade panel installations

Stainless Steel Rail & Bracket

For concealed anchor façade panel installations in hostile

conditions

Undercut Anchor Rail & Brackets (Fischer)

MFSTR-LW1250 MFSTR-1125 MFSTR-SSXHD

MFSTR-UCRAIL 200-000-RAIL MFSTR-050C

LA

DD

ING

Concealed Bracket & Railing Options


CL

AD

DIN

G

Stock J Channel

110-000 J Channel

Made to Order (Custom)

FMAX-J-144-BK

• Wide range of possible sizes• Choice of alloys• Choice of mill, painted or powder coated finishes• Choice of lengths

1.495”

0.079”

3.071”

1.575”

0.118”R=0.079”(TYP.)

0.118”

0.882”

A

B

Ct

0.1250”0.1250”

1.0000”

1.0000” 2.0000”

0.2500”

0.500

0.750

1.000

1.000

1.500

2.000

1.000

1.500

2.000

1.000

1.500

2.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

A CB t


CL

AD

DIN

G

Hat Channel

110-001 Hat Channel


FMAX-HAT-144-BK

• Wide range of possible sizes• Choice of alloys• Choice of mill, painted or powder coated finishes• Choice of lengths

1.693” 3.339”

4.724”

0.079”

0.118”

R=0.079” (TYP.)0.882”

0.118”

A

B

Ct

3.25”

1.125”

0.125”

1.125”

1.00”

0.500

0.750

1.000

1.000

1.500

2.000

1.000

1.500

2.000

1.000

1.500

2.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

0.125

A C• • • •

tB


CL

AD

DIN

G

Wall Bracket - Vertical RailsThermally Isolated Wall Brackets - Vertical Rails

Available punched for metal stud or concrete wall substrate

1 ½’’ Adjustment Range to Shim the Rail for Plumbness

Range of stock sizes available in addition to custom sizes not listed here

Pairing L Rail or T Rail in Black

Features

Range of Adjustment

Vertical Wall Bracket(Top View)

VWB-02

VWB-03

VWB-04

VWB-05

2.0’’

3.0’’

4.0’’

5.0’’

2.0’’

3.0’’

4.0’’

5.0’’

3.0’’

4.5’’

5.5’’

6.6’’

Metal Stud, Concrete




Part Name Projection Adjustable Min Adjustable Max Wall Substrate


Range of Adjustment

Horizontal Wall Bracket(Section View)

Wall Bracket - Horizontal RailsThermally Isolated Wall Brackets - Horizontal Rails

CL

AD

DIN

G

Available punched for metal stud or concrete wall substrate

1 ½’’ Adjustment Range to Shim the Rail for Plumbness

Range of stock sizes available in addition to custom sizes not listed here

Pairing L Rail or T Rail in Black

Features

HWB-02

HWB-03

HWB-04

HWB-05

2.0’’

3.0’’

4.0’’

5.0’’

2.0’’

3.0’’

4.0’’

5.0’’

3.0’’

4.5’’

5.5’’

6.6’’





Part Name Projection Adjustable Min Adjustable Max Wall Substrate


CL

AD

DIN

G

Stock Vent Screen

110-002 1”Vent Screen

210-001 2.25”Vent Screen

0.250”

1.000”

0.625”

1.000”

0.125”

0.5833”

120.000”

0.750”

0.2917”

0.250”

120.000”

0.9640” TYP.

0.125”

0.4125”

0.4125”

0.4980”

0.4750”

0.4750”0.7500”

0.4750”

2.2500”

0.0625”

1.0000”

Made to Order (Custom)• Wide range of possible sizes• Choice of mill, painted or powder coated finishes• Choice of lengths• Allows for air flow behind rain screen panels

when necesary

A

Bt

• •

•

0.500

0.750

1.000

1.250

1.500

1.750

2.000

2.250

2.500

2.750

3.000

3.250

3.500

3.750

4.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

A B t• •

•


Stock System Closure

0.500

0.750

1.000

1.250

1.500

1.750

2.000

2.250

2.500

2.750

3.000

3.250

3.500

3.750

4.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

1.000

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

0.063

A B t

000-003 1” System Closure


210-000 2.25” System Closure

• Wide range of possible sizes• Choice of mill, painted or powder coated finishes• Choice of lengths• For closing drained and black ventilated rain

screen systems without air flow

A

Bt

1.000”

1.000”

0.625”

1.000”

2.250”

0.625”

CL

AD

DIN

G


CL

AD

DIN

G

Hat Channel (Vented & Non-Vented)

Material : Galvanized Steel, Aluminum, & Stainless SteelType : Fabricated from SheetStd Lengths : 10’Custom : Custom sizes available, available with ventilation

holes or without

B

A

1.00 1.00

1/2

1

2 1/2

4

2 1/2

4

2 1/2

4

2 1/2

4

1 1/2

2

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

16 Ga. (.063”) or 18 Ga. (.051”)

DIMENSIONA

DIMENSIONB

THICKNESSt


DIMENSIONA

DIMENSIONB

THICKNESSt

CL

AD

DIN

G

Z Girts (Vented & Non-Vented)

Material : Galvanized Steel, Aluminum, & Stainless SteelType : Fabricated from SheetStd Lengths : 10’Custom : Custom sizes available, available with ventilation

holes or without

A

B


DIMENSIONA

DIMENSIONB

THICKNESSt

Z Girts with Lip (Vented & Non-Vented)

Material : leetS sselniatS & ,munimulA ,leetS dezinavlaG Type : Fabricated from SheetStd Lengths : 10’Custom : Custom sizes available, available with ventilation

holes or without

A

B

CL

AD

DIN

G



holes or without

B

A

DIMENSIONA

DIMENSIONB

THICKNESSt

C Channel (Vented & Non-Vented)

CL

AD

DIN

G


DIMENSIONA

DIMENSIONB

THICKNESSt

C Channel with Lip (Vented & Non-Vented)

CL

AD

DIN

G


holes or without

A

B

STANDOFFS

Aluminum Standoffs .............................. 49

Stainless Standoffs ................................ 50

Standoff Barrels ...................................... 52

Standoff Hardware ................................ 54

- 57 -

STANDOFFS

Aluminum Standoffs .............................. 67

Stainless Standoffs ................................. 68

Standoff Barrels ....................................... 70

Standoff Hardware ................................. 72


Architectural Grade Materials & Finishes

Countertop, Panel & Architectural Signage Applications

ST

AN

DO

FF

S

Stainless Steel Aluminum Bronze(Brushed Finish) (Clear Anodized Finish) (Statuary Finish)

Countertop suppor anel Installation HardwareS ign Hardware


ST

AN

DO

FF

S

Aluminum Cap

Aluminum Cap

Ordering Notes

• Note that the height of the cap varies with the diameter• Custom sizes are available• Specify threaded connector length when ordering

B

A

5/16” - 18Tapped Hole

Standart

Low Profile

Ordering Notes

• Low pro le caps require a 1/2” hole for installation• Specify threaded connector length when ordering

B

.4

95

.25

0

A


Dia. (A)

Dia. (A)

Height (B)

Height (B)

SO-AL-1LPCAP

SO-AL-1.25LPCAP

SO-AL-1.5LPCAP

SO-AL-2LPCAP

SO-AL-1CAP

SO-AL-1.25CAP

SO-AL-1.5CAP

SO-AL-2CAP

Part No.

Part No.

1”

1 1/4”

1 1/2”

2”

1”

1 1/4”

1 1/2”

2”

3/8” Total (1/8” Exposed)




3/8”

1/2”

1/2”

5/8”


ST

AN

DO

FF

S

Stainless Steel Cap

Stainless Steel Cap

Standart

Low Profile

Ordering Notes

• Standard stainless caps require a 7/16” hole for installation• Custom sizes are available• Specify threaded connector length when ordering

.18

8

B

.43

7

A


Ordering Notes

• Low pr require a 1/2” hole for installation• Specify threaded connector length when ordering

B

.4

95

.25

0

A


Dia. (A)

Dia. (A)

Height (B)

Height (B)

SO-SS-1LPCAP

SO-SS-1.25LPCAP

SO-SS-1.5LPCAP

SO-SS-2LPCAP

SO-SS-1CAP

SO-SS-1.25CAP

SO-SS-1.5CAP

SO-SS-2CAP

Part No.

Part No.

1”

1 1/4”

1 1/2”

2”

1”

1 1/4”

1 1/2”

2”










ST

AN

DO

FF

S

Ordering Notes

• Security caps require a 7/16” hole for installation• (2) 3/32” holes for tightening with spanner wrench

B

.18

8

.4

37

A


Ordering Notes

• Please note that you are ordering the “No Stem” cap when ordering• Custom heights available• Specify threaded connector length when ordering

A


B

Stainless Steel Cap

Stainless Steel CapNo Stem

Security Cap

Dia. (A)

Dia. (A)

Height (B)

Height (B)

SO-SS-1SECCAP

SO-SS-1.25SECCAP

SO-SS-1.5SECCAP

SO-SS-2SECCAP

SO-SS-1NSCAP

SO-SS-1.25NSCAP

SO-SS-1.5NSCAP

SO-SS-2NSCAP

Part No.

Part No.

1”

1 1/4”

1 1/2”

2”

1”

1 1/4”

1 1/2”

2”





3/8”

1/2”

1/2”

5/8”


Aluminum Barrels

ST

AN

DO

FF

S

Standard

Ordering Notes

• Custom heights available

while 2” barrels and taller are tapped approximately

B

A


Both Ends

Dia. (A)

1”

2”

3”

4”

6”

Part No.

SO-AL-1BL-1

SO-AL-1BL-2

SO-AL-1BL-3

CUSTOM

CUSTOM

SO-AL-1.25BL-1

SO-AL-1.25BL-2

SO-AL-1.25BL-3

CUSTOM

CUSTOM

SO-AL-1.5BL-1

SO-AL-1.5BL-2

SO-AL-1.5BL-3

CUSTOM

CUSTOM

SO-AL-2BL-1

SO-AL-2BL-2

SO-AL-2BL-3

CUSTOM

CUSTOM

1” Dia.Height (B) 1 1/4” Dia. 1 1/2” Dia. 2” Dia


Stainless Steel Barrels

ST

AN

DO

FF

S

Standard

Ordering Notes

• Custom sizes are available• Stainless Barrels up to 1.5” in height are tapped thru, while 2” barrels and taller are tapped approximately 3/4” from each end

B

A


Both Ends

Dia. (A)

1”

1 1/2”

2”

3”

4”

6”

Part No.

SO-SS-1BL-1

SO-SS-1BL-1.5

SO-SS-1BL-2

SO-SS-1BL-3

CUSTOM

CUSTOM

SO-SS-1.25BL-1

SO-SS-1.25BL-1.5

SO-SS-1.25BL-2

SO-SS-1.25BL-3

CUSTOM

CUSTOM

SO-SS-1.5BL-1

SO-SS-1.5BL-1.5

SO-SS-1.5BL-2

SO-SS-1.5BL-3

CUSTOM

CUSTOM

SO-SS-2BL-1

SO-SS-2BL-1.5

SO-SS-2BL-2

SO-SS-2BL-3

CUSTOM

CUSTOM

1” Dia.Height (B) 1 1/4” Dia. 1 1/2” Dia. 2” Dia


Mounting Hardware

Also AvailableST

AN

DO

FF

S

with Anchor

Ordering Notes

• Custom sizes are available• Ask for assistance from your sales representative

B

A B A C C

Option A

Option B

Option C

Option A

Option B

Option C

HB-A

HB-B

HB-C

TT-A

TT-B

TT-C

1 1/2”

2 1/2”

4”

1” Thick Surface

1.25” Thick Surface

1.75” Thick Surface

5/8”

1”

2”

7/8”

1 1/2”

2”

Hanger Bolts

Tabletop Screw with Anchor

Part Number

Part Number

Overall

Surface Thickness

Machine Thread Wood Screw

ARCHITECTURALMETALS

Angle: Aluminum, Stainless

and Steel ..................................................... 65 .

Channel: Aluminum, Stainless

and Steel ...................................................... 64

Flat Bar: Aluminum, Stainless

and Steel ..................................................... 67

Diamond Tread Plates ........................... 70

Aluminum T Bar ....................................... 72

Aluminum Zees ........................................ 73

www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/

- 65 -

ARCHITECTURALMETALS

Angle: Aluminum, Stainless

and Steel ...................................................... 74

Channel: Aluminum, Stainless

and Steel ...................................................... 85

Flat Bar: Aluminum, Stainless

and Steel ....................................................... 91


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed,

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Architectural Aluminum AngleALUMINUM ANGLE


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed,

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Architectural Aluminum AngleALUMINUM ANGLE


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Structural Aluminum AngleALUMINUM ANGLE

Alloy : 6061 AluminumType : Equal Legs & Unequal LegsStd Lengths : 25'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Mirror Polished


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Structural Aluminum AngleALUMINUM ANGLE

Alloy : 6061 AluminumType : Equal Legs & Unequal LegsStd Lengths : 25'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Mirror Polished


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

AR

CH

ITE

CT

UR

AL

ME

TA

LS

FABRICATED STAINLESS STEEL ANGLE

Alloy : 304 Alloy Type Std Lengths Custom : AnyFinishes : Brushed, Mirror, Mill

Note: This producto order. As a result, there are


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STAINLESS STEEL ANGLEEqual & Unequal Leg Steel Angle

Alloy : 304 or 316 AlloyType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Mirror Polished


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Alloy : Mild SteelType Std Lengths Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STEEL ANGLEEqual & Unequal Leg Steel Angle


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt


AR

CH

ITE

CT

UR

AL

ME

TA

LS

STEEL ANGLEEqual & Unequal Leg Steel Angle


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt


AR

CH

ITE

CT

UR

AL

ME

TA

LS

ANODIZED ANGLEStock Anodized Angle & Shapes


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STAINLESS STEEL ANGLE - SHARP CORNEREqual & Unequal Leg Stainless Angle


BASEA

BASEA

FLANGEA

FLANGEA

BASEt

BASEt

FLANGEt

1

FLANGEt

1

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STAINLESS STEEL CHANNEL - SHARP CORNERStainless Sharp Corner Channel


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Alloy : 304 Alloy Type : Fabricated from SheetStd Lengths : Up to 10’ LengthsCustom : AnyFinishes : Brushed, Mirror, Mill

AR

CH

ITE

CT

UR

AL

ME

TA

LS

FABRICATED STAINLESS STEEL CHANNEL


DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Alloy : 6063 AluminumType : Sharp CornerStd Lengths : 16', 8'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Mirror Polished

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Aluminum Sharp Corner Channel (“C Channel” / “U Channel”)


ALUMINUM CHANNELAluminum Association Aluminum Channel

www.monarchmetal.com

t

6061 Aluminum

Mirror

t

x x x

x xx x x

x x

x x xx x

x x xx x

x x xx x

x x xx x

x x xx x

x x xx x

x x xx x

x x xx x

x x

t t

www.monarchmetal.com/products/aluminum-association-aluminum-channel/

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Aluminum Association Aluminum Channel

BASEA

BASEA

FLANGEA

FLANGEA

BASEt

BASEt

FLANGEt

1

FLANGEt

1


ALUMINUM CHANNELAmerican Standard Aluminum Channel


tt

6061 Aluminum

Mirror

x x

xx

x xxx

x xxx

x xxxx

x xx

x x

xx

x xx

x xx

x xxx

x xx

www.monarchmetal.com/products/american-standard-aluminum-channel/

AR

CH

ITE

CT

UR

AL

ME

TA

LS

American Standard Aluminum Channel

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt


STAINLESS STEEL CHANNELStainless Steel Channel


tt

304 Alloy

x x

x x

x xx

x x

x x

www.monarchmetal.com/products/stainless-steel-channel/

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STAINLESS STEEL CHANNEL

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt


STEEL CHANNELMild Steel Channel


tt

Mild Steel

x xxxx

x xxxx

x xx

x xxxxxx

x xx

x xxxxxx

x xxx

x xxxxx

x

x xxxxxxx

x x

x xx

www.monarchmetal.com/products/mild-steel-channel/

AR

CH

ITE

CT

UR

AL

ME

TA

LS

MILD STEEL CHANNEL

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt


AR

CH

ITE

CT

UR

AL

ME

TA

LS

Aluminum Flat Bar

Alloy : 6063 AluminumType : ASTM B 221Std Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Mirror Polished

DIMENSIONA

DIMENSIONA

THICKNESSt

THICKNESSt


DIMENSIONA

DIMENSIONA

THICKNESSt

THICKNESSt

AR

CH

ITE

CT

UR

AL

ME

TA

LS

Stainless Steel Flat Bar

Alloy : 304 or 316 AlloyType : ASTM A 276/479Std Lengths : 12'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Mirror Polished


FLAT BARStainless Steel Flat Bar


t t

x

x

x

x

x

304 or 316 Alloy

Mirror

www.monarchmetal.com/products/stainless-steel-flat-bar/

– 87 –

AR

CH

ITE

CT

UR

AL

ME

TA

LS

DIMENSIONA

DIMENSIONA

THICKNESSt

THICKNESSt




FLAT BARStainless Steel Flat Bar


x

x

x

x

x

t t

304 or 316 Alloy

Mirror

www.monarchmetal.com/products/stainless-steel-flat-bar/

AR

CH

ITE

CT

UR

AL

ME

TA

LS

DIMENSIONA

DIMENSIONA

THICKNESSt

THICKNESSt




FLAT BARBrass Flat Bar

- 69 -

DIMENSION

ATHICKNESS

t

Alloy : 360 AlloyType : ASTM B 16Std Lengths : 12'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Mirror Polished

DIMENSION

ATHICKNESS

t

1/8 x 1/83/161/45/163/81/25/83/47/8

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

4

3/16 x 3/163/81/25/83/47/8

11 1/4

1 1/21 3/4

2

2 1/2

3/16 x 33 1/2

4

1/4 x 1/45/163/81/25/83/47/8

11 1/41 1/21 3/4

22 1/22 3/4

33 1/2

4

5/16 x 5/163/81/25/83/4

11 1/41 1/2

www.monarchmetal.com/products/brass-flat-bar/Brass Flat BarBrass Flat Bar

- 75 -www.monarchmetal.com

(631)750-3000– 89 –

AR

CH

ITE

CT

UR

AL

ME

TA

LS

DIMENSIONA

DIMENSIONA

THICKNESSt

THICKNESSt

Brass Flat Bar


DIAMOND-TREAD PLATESAluminum


t

3003 Alloy or 6061 Alloy

t

x xx

x x

x xx

x xx

x xx

x xx

x xx

www.monarchmetal.com/products/aluminum-diamond-tread-plates/A

RC

HIT

EC

TU

RA

L M

ET

AL

S

THICKNESSt

THICKNESSt

WIDTH(Inches)

WIDTH(Inches)

LENGTH(Inches)

LENGTH(Inches)

Aluminum Diamond-Tread Plates


DIAMOND-TREAD PLATESStainless Steel


t

304 Alloy

t

x x

x xxx

x x

x x

www.monarchmetal.com/products/stainless-steel-diamond-tread-plates/

AR

CH

ITE

CT

UR

AL

ME

TA

LS

THICKNESSt

THICKNESSt

WIDTH(Inches)

WIDTH(Inches)

LENGTH(Inches)

LENGTH(Inches)

Stainless Steel Diamond-Tread Plates


ALUMINUM TEESSharp Corner Aluminum T Bar


tt

6063 Aluminum

Mirror

x x

x x

x x

x x

x xxx

www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/

– 92 –

AR

CH

ITE

CT

UR

AL

ME

TA

LS

SHARP CORNER ALUMINUM T BAR

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Aluminum Tees


ALUMINUM TEESStructural Aluminum T Bar


tt

6061 Aluminum

x x

x xx

x x

x x

x x

www.http://monarchmetal.com/products/structural-aluminum-t-bar/

– 93 –

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STRUCTURAL ALUMINUM T BAR

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Aluminum Tees


ALUMINUM ZEESSharp Corner Aluminum Z Bar


tt

6063 Aluminum

Mirror

x x

x x

x x

x x

www.monarchmetal.com/products/sharp-corner-aluminum-z-bar/

– 94 –

AR

CH

ITE

CT

UR

AL

ME

TA

LS

SHARP CORNER ALUMINUM Z BAR

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Aluminum Zees


ALUMINUM ZEESStructural Aluminum Z Bar


tt

6061 Aluminum

x x

x x

x x

x x

www.monarchmetal.com/products/structural-aluminum-z-bar/

– 95 –

AR

CH

ITE

CT

UR

AL

ME

TA

LS

STRUCTURAL ALUMINUM Z BAR

DIMENSIONA

DIMENSIONA

DIMENSIONB

DIMENSIONB

THICKNESSt

THICKNESSt

Aluminum Zees

CORNER GUARDS& KICK PLATES

Corner Guards .......................................... 76

Kick Plates ................................................. 77

www.monarchmetal.com/products/corner-guards/CORNER GUARDSwww.monarchmetal.com/products/corner-guards/CORNER GUARDSwww.monarchmetal.com/products/kick-plates/& KICK PLATESwww.monarchmetal.com/products/kick-plates/& KICK PLATES

- 76 -

CORNER GUARDS& KICK PLATES

Corner Guards .......................................

Kick Plates ............................................... 78

103

104


CORNER GUARDSStainless Steel & Aluminum

- 76 -

DIMENSION DIMENSION PART # STANDARD

A BTHICKNESS

t

Alloy : 304 Stainless, Aluminum, Diamond PlateType : 16 Gauge (Standard), 14 Ga., 18 Ga.Std Lengths : 4', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Brushed Finish, Mirror Polished

• Custom Shapes & Sizes Available •

• Please Call 631-750-3000 •

1 1/4 x 48 x 1/16 CORN1.25x48 16 Ga Stainless Steel, Adhesive Mounted1 1/4 x 96 x 1/16 CORN1.25x961 1/2 x 48 x 1/16 CORN1.5x481 1/2 x 96 x 1/16 CORN1.5x962 1/2 x 48 x 1/16 CORN2.5x482 1/2 x 96 x 1/16 CORN2.5x963 1/2 x 48 x 1/16 CORN3.5x483 1/2 x 96 x 1/16 CORN3.5x96

90 Angle˚

Bullnose3 1/2 x 48 x 1/16 BCORN3.5x483 1/2 x 96 x 1/16 BCORN3.5x96

90°SharpAngle

90°Rounded

Angle

A

t

B

t

A

B

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted

www.monarchmetal.com/products/corner-guards/CORNER GUARDSCORNER GUARDS


(631)750-3000– 97 –

CO

RN

ER

GU

AR

DS

& K

ICK

PL

AT

ES

DIMENSIONA

Bullnose

DIMENSIONB

THICKNESSt

PART# STANDART

CORNER GUARDSStainless Steel & Aluminum


KICK PLATESStainless Steel & Aluminum

- 77 -

Alloy : 304 Stainless, Aluminum, Bronze, BrassType : 18 Gauge (Standard), 16 Ga., 11 Ga.Std Lengths : See BelowCustom : Available with Rough Finish for Adhesive, Punched,

or Punched & CountersunkFinishes : Mill, Brushed Finish, Mirror Polished

• Custom Shapes & Sizes Available •

• Please Call 631-750-3000 •

24 x 34 x 18 Ga. KICK24x3428 x 6 x 18 Ga. KICK28x628 x 8 x 18 Ga. KICK28x828 x 10 x 18 Ga. KICK28x1028 x 12 x 18 Ga. KICK28x1228 x 36 x 18 Ga. KICK28x3628 x 42 x 18 Ga. KICK28x4230 x 6 x 18 Ga. KICK30x630 x 8 x 18 Ga. KICK30x830 x 10 x 18 Ga. KICK30x1030 x 12 x 18 Ga. KICK30x1234 x 6 x 18 Ga. KICK34x634 x 8 x 18 Ga. KICK34x834 x 10 x 18 Ga. KICK34x1034 x 12 x 18 Ga. KICK34x1234 x 16 x 18 Ga. KICK34x1634 x 34 x 18 Ga. KICK34x3434 x 36 x 18 Ga. KICK34x3634 x 42 x 18 Ga. KICK34x4234 x 46 x 18 Ga. KICK34x4636 x 8 x 18 Ga. KICK36x836 x 10 x 18 Ga. KICK36x1036 x 12 x 18 Ga. KICK36x12

DIMENSION DIMENSION PART # STANDARD

A BTHICKNESS

t

A

Bt

Armor PlateMop PlateKick PlateKick PlateKick Plate

Armor PlateArmor PlateMop PlateKick PlateKick PlateKick PlateMop PlateKick PlateKick PlateKick PlateKick Plate

Armor PlateArmor PlateArmor PlateArmor Plate

Kick PlateKick PlateKick Plate

TYPE

18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes

www.monarchmetal.com/products/kick-plates/KICK PLATESKICK PLATES


(631)750-3000– 98 –

KICK PLATES

DIMENSIONA

DIMENSIONB

THICKNESSt

PART#TYPE STANDART

Stainless Steel & Aluminum

CO

RN

ER

GU

AR

DS

& K

ICK

PL

AT

ES

Stainless SteelCladding System(Page 47)

Securely Installs with Insert (Page 48)

Sandwich / Honeycomb Panel Rain Screen Attachment

Properly installed anchors can hold up to 100 KG

100Kg

Secure installation through the combination of a threaded insert ready to receive a bolt

NEW PRODUCT

Monarch Metal 1625 Sycamore Ave Bohemia, New York 11716 (631) 750 3000 [email protected] Metal 1700 Ocean Ave Ronkonkoma, New York 11779 (631) 750 3000 [email protected]

Monarch Metal | 1700 Ocean Ave. | Ronkonkoma, New York 11779 | (631) 750 3000 | [email protected]

CONCEALED FASTENER WOOD PANELINGCohen Architectural Woodworking

University of Kansas Hospital

Concealed FasternerInterior PanelingMonarch Z Clip

WEB-19

PROJECT:

100s of options in colors and finishes

(631) 750-3000www.monarchmetal.com

Documents

Wall Panel & Cladding (631) 750-3000€¦ · Wall Panel System • System Features • Reveal Options • Corner & Perimeter Trim Options • Glass Wall Panel System 43 43 45 48 51