Need a roof – visit www.roof.co.nz

Rainwater SystemsSimply select a rainwater product, along with one of the wide range of substrates and surface finishes, in order to complete and enhance your project.

Your distributor

Gutters, Downpipes & Fascia

DownpipesAvailable in 65 mm 80 mm and 100 mm sizes, and supplied in varying lengths to meet requirements.

100 mm I.D. 80 mm I.D. 65 mm I.D.

145

mm

125 mm

80 m

m

90 m

m

59 m

m

82 mm

150 mm 150 mm

75 m

m

135

mm

& 1

90 m

m125 mm & 150 mm

Profile measurements vary between spouting sizes

AucklAnD (Head Office) Roofing Industries Ltd. 5 John Glenn Avenue, North Harbour. PO Box 302-385 North Harbour 0751. Ph:(09) 414 4585 Fax:(09) 414 4586 E:office@roof.co.nzWHAngAREi Roofing Industries (Northland) Ltd. 38 Winger Crescent, Kamo, Whangarei. PO Box 883 Whangarei 0112. Ph:(09) 437 2040 Fax:(09) 437 5010 E:northland@roof.co.nzHAMilTOn Roofing Industries (Waikato) Ltd. 78 Sunshine Avenue, Te Rapa, Hamilton. PO Box 20281 Te Rapa, Hamilton 3241. Ph:(07) 849 5115 Fax:(07) 849 2115 E:waikato@roof.co.nzTAuPO Roofing Industries (Taupo) Ltd. 1158 Rakaunui Road, Taupo. PO Box 408 Taupo 3351. Ph:(07) 376 7971 Fax:(07) 376 7972 E:taupo@roof.co.nzPAlMERSTOn nORTH Roofing Industries (Central) Ltd. 653 Tremaine Avenue, Palmerston North. PO Box 4584 Palmerston North 4410. Ph:(06) 353 8480 Fax:(06) 353 8470 E:central@roof.co.nzWEllingTOn Roofing Industries (Wellington) Ltd. 2 Cashew Street, Grenada North, Wellington 5028. Ph:(04) 238 4390 Fax:(04) 238 4391 E:wgtn@roof.co.nzSOuTH iSlAnD Roofing Industries Ltd. 220a Annex Road, Middleton, PO Box 6248 Upper Riccarton, Christchurch 8442. Ph:(03) 339 2324 Fax:(03) 339 2325 E:south@roof.co.nz

R.i. 125 mm Box gutter

The R.I. 125 Box Gutter is designed to perform where heavy rainfall Intensity may occur. A higher face prevents unsightly views of the end of the roofing sheet, particularly on higher ribbed profiles.

Quarter Round

Quarter Round Spouting maintains its traditional appeal, and provides simplicity and classic lines for use in most residential applications. Supplied with internal or external brackets.

1/2 Round

Well proven, and recognised as an aesthetically pleasing spouting product. ½ Round will certainly enhance the overall appeal of your home.Supplied with external brackets.

Old gothic

Old Gothic, which is available in two sizes, is reminiscent of the spouting types used on colonial homes. Old Gothic is supplied with internal or external brackets.

Multifit™ Fascia Multifit™ Fascia can be used in conjunction with a wide number of roof types by incorporating a simple attachment system, allowing removal and re-installation without disturbing the main roof material.

J line An extremely popular spouting system which utilises an extended sloping face to hide the end of the roofing and is particularly beneficial for use on low roof-pitch residential applications. Supplied with internal brackets.

85

50

35

35

120

15

65

multidek®

Why not utilise the knowledgeable staff at Roofing Industries to assist you in choosing the appropriate translucent and transparent products for your project.

Roof and wall natural lighting

Choose from:• Polycarbonate• GlassReinforcedPolyester• Multiwall

Multidek® hidden fixing clip.

Roofing Cladding Rainwater Systems

Roofing with Style

Practical residential roofing & cladding solutions – innovative products

www.roof.co.nzMultidek® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

•Forloadingsgreaterthan2.0kPa,consultRoofingIndustriesorvisitwww.roof.co.nz

SPEciFicATiOnS

Sheet width: 520 mm Sheet length: Any length (Subject to transportation)

SPAn TABlES (Steel Substrate Material)

Type of Span Maximum Span (Metres) Maximum Span (Metres) .48 mm BMT .55 mm BMTIntermediate 1.600 2.500End 1.100 1.600

Note: Maximum design load 2.0kPa

MAY 2012

1210

225 5050

3

250

500 (Effective Cover)

520

Sheet coverage: 500 mm Minimum pitch: 3º

RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nzThis literature should be read in conjunction with our technical information

All measurements are in millimetres.

© Roofing Industries 2012

© R

oofin

g In

dust

ries

201

2

Possibly the most underestimated residential roofing product on the market, and yet if you examine the clean European lines, architectural flexibility and couple this with a completely hidden fixing system (no need to penetrate the roofing), why would you not consider this practical and attractive alternative?

Multidek’s high rib design provides excellent water carrying capacity and is particularly suitable for high rainfall areas. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof finishes in order to meet individual requirements.

Whilst aesthetics and overall appearances remain a powerful motivating factor during selection of roof type, of equal importance is the ability of the roofing product to prevent water leakage, particularly on lower pitch roofs.

Ribline® is manufactured with a unique capillary-preventing edge lap and offers the best of both worlds by providing the home owner with security against water leakage, and a modern attractive roof finish. With 800 mm sheet coverage, Ribline® offers the consumer, less laps,

reduction in the number of fasteners required, faster installation and ultimately, reduced costs. Ribline® can also be supplied as an extra-wide 960 mm coverage sheet. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof finishes meeting individual requirements.

Practical roofing & cladding solutionsInnovative products

corrugate remains an ageless icon, and as a cost competitive and trend setting roofing and cladding material, continues to gain in popularity.

Corrugate offers a stylish alternative to today’s building designers and home owners alike, allowing creative flair and individuality during the design process. Product capability along

with a little imagination will ensure a distinct point of difference to other homes in the vicinity. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel, perforated,

or an extensive range of and pre-painted modern roof finishes meeting individual requirements.

A miniature version of the corrugate roofing product, Slimline® offers a decorative alternative with a wide range of uses, including a perforated acoustic sheet.

Slimline® is particularly suited for projects such as internal and external wall partitioning, cladding, fencing, soffits, ceilings, and some curved applications. Choose from unpainted Zincalume®, Galvanised or an extensive range of pre-painted modern roof finishes.

ribline®slimline®

utilising the very latest in rollforming technology, Trimrib® can be manufactured as either Trimrib® (S) single swage Trimrib® (TS) twin swage, or Trimrib® (V) two “V” swages.

Each profile is aesthetically pleasing, having been designed with modern building style in mind and creating contrasts of light and shade in straight lines. Trimrib® enables rapid water shedding from the roof with a low minimum pitch requirement of 3 degrees and when coupled with or without one of the pre-painted surface finishes, Trimrib® ensures the completed project provides purpose and visual appeal. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof colours in order to meet individual requirements.

trimrib®

RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz

CorrugateMini Corrugate

Wide corrugate Manufactured in Auckland – additional freight may be applicable outside of Auckland. Manufacture of wide corrugate is subject to minimum quantities. Slimline® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

•Slimline® is not designed as a trafficable roofing product. •Forfurtherspanningandinstallationadvice,contactRoofingIndustries.

Trimrib® (S) and Trimrib® (TS) Manufactured in Auckland, Taupo, Palmerston North and Christchurch. Trimrib® (V) in Taupo and Palmerston North – additional freight may be applicable outside of these areas.

SPEciFicATiOnS

Sheet width: 845 mm & 1100 mm Sheet length: Any length (Subject to transportation)

Sheet coverage: 762 mm & 995 mm Minimum pitch: 8º

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate that as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate tha as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate that as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

wide corrugate76.20 38.10

18

995 (Effective Cover)1100

corrugate

762 (Effective Cover)845

76.20 38.1018

2

25

6

815 (Effective Cover)840

25

800 (Effective Cover)890

9725

3063

2 2932 120º

16015

ribline® 800

ribline® 960

960 (Effective Cover)1030

9725

3063

2 2932 120º

16018

SPEciFicATiOnS

Sheet width: 820 mm Sheet length: Any length (Subject to transportation)

SPEciFicATiOnS

Sheet width: 890 mm & 1030 mm Sheet length: Any length (Subject to transportation)

Sheet coverage: 800 mm & 960 mm Minimum pitch: 3º

Sheet coverage: 760 mm Minimum pitch: 3ºSPEciFicATiOnS

Sheet width: 840 mm Sheet length: Maximum 8 metres

Sheet coverage: 815 mm

AllOWABlE SPAnS

THicknESS EnD SPAn inTERMEDiATE SPAn

.40 mm BMT 0.600 mm 0.600 mm

.55 mm BMT 0.600 mm 0.800 mm

This literature should be read in conjunction with our technical information This literature should be read in conjunction with our technical information This literature should be read in conjunction with our technical information

All measurements are in millimetres.

All measurements are in millimetres.

All measurements are in millimetres.

All measurements are in millimetres.

Trimrib® (V)

760 (Effective Cover)820

6

127

25

28 25 21 25 28

63

1905 29

32 120º

Trimrib® (S)

45

760 (Effective Cover)820

6

127

25 63

1905 29

32 120º

25

Trimrib® (TS)

127

6 190760 (Effective Cover)

820

63

5 2914 32 120º

26 24 26 24 26

© Roofing Industries 2012 © Roofing Industries 2012 © Roofing Industries 2012

Ribline® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

Whilst aesthetics and overall appearances remain a powerful motivating factor during selection of roof type, of equal importance is the ability of the roofing product to prevent water leakage, particularly on lower pitch roofs.

Ribline® is manufactured with a unique capillary-preventing edge lap and offers the best of both worlds by providing the home owner with security against water leakage, and a modern attractive roof finish. With 800 mm sheet coverage, Ribline® offers the consumer, less laps,

reduction in the number of fasteners required, faster installation and ultimately, reduced costs. Ribline® can also be supplied as an extra-wide 960 mm coverage sheet. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof finishes meeting individual requirements.

Practical roofing & cladding solutionsInnovative products

corrugate remains an ageless icon, and as a cost competitive and trend setting roofing and cladding material, continues to gain in popularity.

Corrugate offers a stylish alternative to today’s building designers and home owners alike, allowing creative flair and individuality during the design process. Product capability along

with a little imagination will ensure a distinct point of difference to other homes in the vicinity. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel, perforated,

or an extensive range of and pre-painted modern roof finishes meeting individual requirements.

A miniature version of the corrugate roofing product, Slimline® offers a decorative alternative with a wide range of uses, including a perforated acoustic sheet.

Slimline® is particularly suited for projects such as internal and external wall partitioning, cladding, fencing, soffits, ceilings, and some curved applications. Choose from unpainted Zincalume®, Galvanised or an extensive range of pre-painted modern roof finishes.

ribline®slimline®

utilising the very latest in rollforming technology, Trimrib® can be manufactured as either Trimrib® (S) single swage Trimrib® (TS) twin swage, or Trimrib® (V) two “V” swages.

Each profile is aesthetically pleasing, having been designed with modern building style in mind and creating contrasts of light and shade in straight lines. Trimrib® enables rapid water shedding from the roof with a low minimum pitch requirement of 3 degrees and when coupled with or without one of the pre-painted surface finishes, Trimrib® ensures the completed project provides purpose and visual appeal. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof colours in order to meet individual requirements.

trimrib®

RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz

CorrugateMini Corrugate

Wide corrugate Manufactured in Auckland – additional freight may be applicable outside of Auckland. Manufacture of wide corrugate is subject to minimum quantities. Slimline® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

•Slimline® is not designed as a trafficable roofing product. •Forfurtherspanningandinstallationadvice,contactRoofingIndustries.

Trimrib® (S) and Trimrib® (TS) Manufactured in Auckland, Taupo, Palmerston North and Christchurch. Trimrib® (V) in Taupo and Palmerston North – additional freight may be applicable outside of these areas.

SPEciFicATiOnS

Sheet width: 845 mm & 1100 mm Sheet length: Any length (Subject to transportation)

Sheet coverage: 762 mm & 995 mm Minimum pitch: 8º

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate that as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate tha as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate that as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

wide corrugate76.20 38.10

18

995 (Effective Cover)1100

corrugate

762 (Effective Cover)845

76.20 38.1018

2

25

6

815 (Effective Cover)840

25

800 (Effective Cover)890

9725

3063

2 2932 120º

16015

ribline® 800

ribline® 960

960 (Effective Cover)1030

9725

3063

2 2932 120º

16018

SPEciFicATiOnS

Sheet width: 820 mm Sheet length: Any length (Subject to transportation)

SPEciFicATiOnS

Sheet width: 890 mm & 1030 mm Sheet length: Any length (Subject to transportation)

Sheet coverage: 800 mm & 960 mm Minimum pitch: 3º

Sheet coverage: 760 mm Minimum pitch: 3ºSPEciFicATiOnS

Sheet width: 840 mm Sheet length: Maximum 8 metres

Sheet coverage: 815 mm

AllOWABlE SPAnS

THicknESS EnD SPAn inTERMEDiATE SPAn

.40 mm BMT 0.600 mm 0.600 mm

.55 mm BMT 0.600 mm 0.800 mm

This literature should be read in conjunction with our technical information This literature should be read in conjunction with our technical information This literature should be read in conjunction with our technical information

All measurements are in millimetres.

All measurements are in millimetres.

All measurements are in millimetres.

All measurements are in millimetres.

Trimrib® (V)

760 (Effective Cover)820

6

127

25

28 25 21 25 28

63

1905 29

32 120º

Trimrib® (S)

45

760 (Effective Cover)820

6

127

25 63

1905 29

32 120º

25

Trimrib® (TS)

127

6 190760 (Effective Cover)

820

63

5 2914 32 120º

26 24 26 24 26

© Roofing Industries 2012 © Roofing Industries 2012 © Roofing Industries 2012

Ribline® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

Whilst aesthetics and overall appearances remain a powerful motivating factor during selection of roof type, of equal importance is the ability of the roofing product to prevent water leakage, particularly on lower pitch roofs.

Ribline® is manufactured with a unique capillary-preventing edge lap and offers the best of both worlds by providing the home owner with security against water leakage, and a modern attractive roof finish. With 800 mm sheet coverage, Ribline® offers the consumer, less laps,

reduction in the number of fasteners required, faster installation and ultimately, reduced costs. Ribline® can also be supplied as an extra-wide 960 mm coverage sheet. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof finishes meeting individual requirements.

Practical roofing & cladding solutionsInnovative products

corrugate remains an ageless icon, and as a cost competitive and trend setting roofing and cladding material, continues to gain in popularity.

Corrugate offers a stylish alternative to today’s building designers and home owners alike, allowing creative flair and individuality during the design process. Product capability along

with a little imagination will ensure a distinct point of difference to other homes in the vicinity. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel, perforated,

or an extensive range of and pre-painted modern roof finishes meeting individual requirements.

A miniature version of the corrugate roofing product, Slimline® offers a decorative alternative with a wide range of uses, including a perforated acoustic sheet.

Slimline® is particularly suited for projects such as internal and external wall partitioning, cladding, fencing, soffits, ceilings, and some curved applications. Choose from unpainted Zincalume®, Galvanised or an extensive range of pre-painted modern roof finishes.

ribline®slimline®

utilising the very latest in rollforming technology, Trimrib® can be manufactured as either Trimrib® (S) single swage Trimrib® (TS) twin swage, or Trimrib® (V) two “V” swages.

Each profile is aesthetically pleasing, having been designed with modern building style in mind and creating contrasts of light and shade in straight lines. Trimrib® enables rapid water shedding from the roof with a low minimum pitch requirement of 3 degrees and when coupled with or without one of the pre-painted surface finishes, Trimrib® ensures the completed project provides purpose and visual appeal. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof colours in order to meet individual requirements.

trimrib®

RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nz

CorrugateMini Corrugate

Wide corrugate Manufactured in Auckland – additional freight may be applicable outside of Auckland. Manufacture of wide corrugate is subject to minimum quantities. Slimline® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

•Slimline® is not designed as a trafficable roofing product. •Forfurtherspanningandinstallationadvice,contactRoofingIndustries.

Trimrib® (S) and Trimrib® (TS) Manufactured in Auckland, Taupo, Palmerston North and Christchurch. Trimrib® (V) in Taupo and Palmerston North – additional freight may be applicable outside of these areas.

SPEciFicATiOnS

Sheet width: 845 mm & 1100 mm Sheet length: Any length (Subject to transportation)

Sheet coverage: 762 mm & 995 mm Minimum pitch: 8º

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate that as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate tha as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

SPAnS: When considering purlin and girt spacing it is important to follow due process as follows:If a building is being designed and constructed in full accordance with E2/AS1 of the NZ Building Code and the products to be used are covered by that document, then it is a requirement that both design spans and fastener patterns comply with E2/AS1.

However, it is also appropriate that as a manufacturer, Roofing Industries may provide more optimum spans and appropriate fastener pattern and we do recommend this option. Please contact your local Roofing Industries branch or, for a further understanding, please refer to the relevant product Profile Technical Summary data sheet available from our website.

wide corrugate76.20 38.10

18

995 (Effective Cover)1100

corrugate

762 (Effective Cover)845

76.20 38.1018

2

25

6

815 (Effective Cover)840

25

800 (Effective Cover)890

9725

3063

2 2932 120º

16015

ribline® 800

ribline® 960

960 (Effective Cover)1030

9725

3063

2 2932 120º

16018

SPEciFicATiOnS

Sheet width: 820 mm Sheet length: Any length (Subject to transportation)

SPEciFicATiOnS

Sheet width: 890 mm & 1030 mm Sheet length: Any length (Subject to transportation)

Sheet coverage: 800 mm & 960 mm Minimum pitch: 3º

Sheet coverage: 760 mm Minimum pitch: 3ºSPEciFicATiOnS

Sheet width: 840 mm Sheet length: Maximum 8 metres

Sheet coverage: 815 mm

AllOWABlE SPAnS

THicknESS EnD SPAn inTERMEDiATE SPAn

.40 mm BMT 0.600 mm 0.600 mm

.55 mm BMT 0.600 mm 0.800 mm

This literature should be read in conjunction with our technical information This literature should be read in conjunction with our technical information This literature should be read in conjunction with our technical information

All measurements are in millimetres.

All measurements are in millimetres.

All measurements are in millimetres.

All measurements are in millimetres.

Trimrib® (V)

760 (Effective Cover)820

6

127

25

28 25 21 25 28

63

1905 29

32 120º

Trimrib® (S)

45

760 (Effective Cover)820

6

127

25 63

1905 29

32 120º

25

Trimrib® (TS)

127

6 190760 (Effective Cover)

820

63

5 2914 32 120º

26 24 26 24 26

© Roofing Industries 2012 © Roofing Industries 2012 © Roofing Industries 2012

Ribline® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

Need a roof – visit www.roof.co.nz

Rainwater SystemsSimply select a rainwater product, along with one of the wide range of substrates and surface finishes, in order to complete and enhance your project.

Your distributor

Gutters, Downpipes & Fascia

DownpipesAvailable in 65 mm 80 mm and 100 mm sizes, and supplied in varying lengths to meet requirements.

100 mm I.D. 80 mm I.D. 65 mm I.D.

145

mm

125 mm

80 m

m

90 m

m

59 m

m

82 mm

150 mm 150 mm

75 m

m

135

mm

& 1

90 m

m125 mm & 150 mm

Profile measurements vary between spouting sizes

AucklAnD (Head Office) Roofing Industries Ltd. 5 John Glenn Avenue, North Harbour. PO Box 302-385 North Harbour 0751. Ph:(09) 414 4585 Fax:(09) 414 4586 E:office@roof.co.nzWHAngAREi Roofing Industries (Northland) Ltd. 38 Winger Crescent, Kamo, Whangarei. PO Box 883 Whangarei 0112. Ph:(09) 437 2040 Fax:(09) 437 5010 E:northland@roof.co.nzHAMilTOn Roofing Industries (Waikato) Ltd. 78 Sunshine Avenue, Te Rapa, Hamilton. PO Box 20281 Te Rapa, Hamilton 3241. Ph:(07) 849 5115 Fax:(07) 849 2115 E:waikato@roof.co.nzTAuPO Roofing Industries (Taupo) Ltd. 1158 Rakaunui Road, Taupo. PO Box 408 Taupo 3351. Ph:(07) 376 7971 Fax:(07) 376 7972 E:taupo@roof.co.nzPAlMERSTOn nORTH Roofing Industries (Central) Ltd. 653 Tremaine Avenue, Palmerston North. PO Box 4584 Palmerston North 4410. Ph:(06) 353 8480 Fax:(06) 353 8470 E:central@roof.co.nzWEllingTOn Roofing Industries (Wellington) Ltd. 2 Cashew Street, Grenada North, Wellington 5028. Ph:(04) 238 4390 Fax:(04) 238 4391 E:wgtn@roof.co.nzSOuTH iSlAnD Roofing Industries Ltd. 220a Annex Road, Middleton, PO Box 6248 Upper Riccarton, Christchurch 8442. Ph:(03) 339 2324 Fax:(03) 339 2325 E:south@roof.co.nz

R.i. 125 mm Box gutter

The R.I. 125 Box Gutter is designed to perform where heavy rainfall Intensity may occur. A higher face prevents unsightly views of the end of the roofing sheet, particularly on higher ribbed profiles.

Quarter Round

Quarter Round Spouting maintains its traditional appeal, and provides simplicity and classic lines for use in most residential applications. Supplied with internal or external brackets.

1/2 Round

Well proven, and recognised as an aesthetically pleasing spouting product. ½ Round will certainly enhance the overall appeal of your home.Supplied with external brackets.

Old gothic

Old Gothic, which is available in two sizes, is reminiscent of the spouting types used on colonial homes. Old Gothic is supplied with internal or external brackets.

Multifit™ Fascia Multifit™ Fascia can be used in conjunction with a wide number of roof types by incorporating a simple attachment system, allowing removal and re-installation without disturbing the main roof material.

J line An extremely popular spouting system which utilises an extended sloping face to hide the end of the roofing and is particularly beneficial for use on low roof-pitch residential applications. Supplied with internal brackets.

85

50

35

35

120

15

65

multidek®

Why not utilise the knowledgeable staff at Roofing Industries to assist you in choosing the appropriate translucent and transparent products for your project.

Roof and wall natural lighting

Choose from:• Polycarbonate• GlassReinforcedPolyester• Multiwall

Multidek® hidden fixing clip.

Roofing Cladding Rainwater Systems

Roofing with Style

Practical residential roofing & cladding solutions – innovative products

www.roof.co.nzMultidek® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

•Forloadingsgreaterthan2.0kPa,consultRoofingIndustriesorvisitwww.roof.co.nz

SPEciFicATiOnS

Sheet width: 520 mm Sheet length: Any length (Subject to transportation)

SPAn TABlES (Steel Substrate Material)

Type of Span Maximum Span (Metres) Maximum Span (Metres) .48 mm BMT .55 mm BMTIntermediate 1.600 2.500End 1.100 1.600

Note: Maximum design load 2.0kPa

MAY 2012

1210

225 5050

3

250

500 (Effective Cover)

520

Sheet coverage: 500 mm Minimum pitch: 3º

RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nzThis literature should be read in conjunction with our technical information

All measurements are in millimetres.

© Roofing Industries 2012

© R

oofin

g In

dust

ries

201

2

Possibly the most underestimated residential roofing product on the market, and yet if you examine the clean European lines, architectural flexibility and couple this with a completely hidden fixing system (no need to penetrate the roofing), why would you not consider this practical and attractive alternative?

Multidek’s high rib design provides excellent water carrying capacity and is particularly suitable for high rainfall areas. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof finishes in order to meet individual requirements.

Need a roof – visit www.roof.co.nz

Rainwater SystemsSimply select a rainwater product, along with one of the wide range of substrates and surface finishes, in order to complete and enhance your project.

Your distributor

Gutters, Downpipes & Fascia

DownpipesAvailable in 65 mm 80 mm and 100 mm sizes, and supplied in varying lengths to meet requirements.

100 mm I.D. 80 mm I.D. 65 mm I.D.

145

mm

125 mm

80 m

m

90 m

m

59 m

m

82 mm

150 mm 150 mm

75 m

m

135

mm

& 1

90 m

m125 mm & 150 mm

Profile measurements vary between spouting sizes

AucklAnD (Head Office) Roofing Industries Ltd. 5 John Glenn Avenue, North Harbour. PO Box 302-385 North Harbour 0751. Ph:(09) 414 4585 Fax:(09) 414 4586 E:office@roof.co.nzWHAngAREi Roofing Industries (Northland) Ltd. 38 Winger Crescent, Kamo, Whangarei. PO Box 883 Whangarei 0112. Ph:(09) 437 2040 Fax:(09) 437 5010 E:northland@roof.co.nzHAMilTOn Roofing Industries (Waikato) Ltd. 78 Sunshine Avenue, Te Rapa, Hamilton. PO Box 20281 Te Rapa, Hamilton 3241. Ph:(07) 849 5115 Fax:(07) 849 2115 E:waikato@roof.co.nzTAuPO Roofing Industries (Taupo) Ltd. 1158 Rakaunui Road, Taupo. PO Box 408 Taupo 3351. Ph:(07) 376 7971 Fax:(07) 376 7972 E:taupo@roof.co.nzPAlMERSTOn nORTH Roofing Industries (Central) Ltd. 653 Tremaine Avenue, Palmerston North. PO Box 4584 Palmerston North 4410. Ph:(06) 353 8480 Fax:(06) 353 8470 E:central@roof.co.nzWEllingTOn Roofing Industries (Wellington) Ltd. 2 Cashew Street, Grenada North, Wellington 5028. Ph:(04) 238 4390 Fax:(04) 238 4391 E:wgtn@roof.co.nzSOuTH iSlAnD Roofing Industries Ltd. 220a Annex Road, Middleton, PO Box 6248 Upper Riccarton, Christchurch 8442. Ph:(03) 339 2324 Fax:(03) 339 2325 E:south@roof.co.nz

R.i. 125 mm Box gutter

The R.I. 125 Box Gutter is designed to perform where heavy rainfall Intensity may occur. A higher face prevents unsightly views of the end of the roofing sheet, particularly on higher ribbed profiles.

Quarter Round

Quarter Round Spouting maintains its traditional appeal, and provides simplicity and classic lines for use in most residential applications. Supplied with internal or external brackets.

1/2 Round

Well proven, and recognised as an aesthetically pleasing spouting product. ½ Round will certainly enhance the overall appeal of your home.Supplied with external brackets.

Old gothic

Old Gothic, which is available in two sizes, is reminiscent of the spouting types used on colonial homes. Old Gothic is supplied with internal or external brackets.

Multifit™ Fascia Multifit™ Fascia can be used in conjunction with a wide number of roof types by incorporating a simple attachment system, allowing removal and re-installation without disturbing the main roof material.

J line An extremely popular spouting system which utilises an extended sloping face to hide the end of the roofing and is particularly beneficial for use on low roof-pitch residential applications. Supplied with internal brackets.

85

50

35

35

120

15

65

multidek®

Why not utilise the knowledgeable staff at Roofing Industries to assist you in choosing the appropriate translucent and transparent products for your project.

Roof and wall natural lighting

Choose from:• Polycarbonate• GlassReinforcedPolyester• Multiwall

Multidek® hidden fixing clip.

Roofing Cladding Rainwater Systems

Roofing with Style

Practical residential roofing & cladding solutions – innovative products

www.roof.co.nzMultidek® Manufactured in Auckland – additional freight may be applicable outside of Auckland.

•Forloadingsgreaterthan2.0kPa,consultRoofingIndustriesorvisitwww.roof.co.nz

SPEciFicATiOnS

Sheet width: 520 mm Sheet length: Any length (Subject to transportation)

SPAn TABlES (Steel Substrate Material)

Type of Span Maximum Span (Metres) Maximum Span (Metres) .48 mm BMT .55 mm BMTIntermediate 1.600 2.500End 1.100 1.600

Note: Maximum design load 2.0kPa

MAY 2012

1210

225 5050

3

250

500 (Effective Cover)

520

Sheet coverage: 500 mm Minimum pitch: 3º

RooFiNG iNDuStRieS FReePHoNe 0800 844 822 WWW.ROOF.cO.nzThis literature should be read in conjunction with our technical information

All measurements are in millimetres.

© Roofing Industries 2012

© R

oofin

g In

dust

ries

201

2

Possibly the most underestimated residential roofing product on the market, and yet if you examine the clean European lines, architectural flexibility and couple this with a completely hidden fixing system (no need to penetrate the roofing), why would you not consider this practical and attractive alternative?

Multidek’s high rib design provides excellent water carrying capacity and is particularly suitable for high rainfall areas. Choose from unpainted Zincalume®, Galvanised, ZAM™, Aluminium, Copper, Stainless Steel or an extensive range of and pre-painted modern roof finishes in order to meet individual requirements.