Upload
zhiqiang-gu
View
229
Download
0
Embed Size (px)
Citation preview
8/7/2019 w01 SS Heat Transfer
1/20
WORKSHOP 1
STEADY STATE HEAT TRANSFER
WORKSHOP 1
STEADY STATE HEAT TRANSFER
8/7/2019 w01 SS Heat Transfer
2/20
Mar120, Workshop 10, March 2001 WS 1-2
8/7/2019 w01 SS Heat Transfer
3/20
Mar120, Workshop 10, March 2001 WS 1-3
Model Description
In this Exercise, the following structure will be subjected to thedesignated thermal (temperature and convective) loading and
analyzed to determine the steady-state temperature distribution.
8/7/2019 w01 SS Heat Transfer
4/20
Mar120, Workshop 10, March 2001 WS 1-4
Objective Demonstrate the use of thermal analysis with temperature loading.
Required A file named Thermal_structural.ses in your working directory
(Ask your instructor for it if you dont see it before starting.)
8/7/2019 w01 SS Heat Transfer
5/20
Mar120, Workshop 10, March 2001 WS 1-5
Suggested Exercise Steps1. Create geometry by running the session file.
2. Create the temperature fields.
3. Create the material properties.
4. Create the Loads and BCs.
5. Submit the job to analysis.
6. Evaluate the results.
8/7/2019 w01 SS Heat Transfer
6/20
Mar120, Workshop 10, March 2001 WS 1-6
CREATE NEW DATABASE
Open a new database. Name itthermal_structural.db
a. File: New
b. Enterthermal_structural.db
as the file name.
c. Click OK.
d. Enter2.00 for the ModelDimension.
e. Select MSC.Marcas theAnalysis Code.
f. Select Thermalas theAnalysis Type.
g. Click OK.
a
thermal_structuralb
MSC.MarcT e
ThermalT f
g
2.00 d
c
8/7/2019 w01 SS Heat Transfer
7/20
Mar120, Workshop 10, March 2001 WS 1-7
Step 1. Runthe Provided Session File
Create necessary geometry byplaying the session file.
a. File: Session / Play.
b. SelectThermal_structural.ses .
c. Click Apply.
Thermal_structural
Thermal_structural.sesc
b
After clickingApply, youwill see the model being
constructed automaticallyby the session file.
Your model should look like this.
a
8/7/2019 w01 SS Heat Transfer
8/20
Mar120, Workshop 10, March 2001 WS 1-8
Step 2. Fields:Create / Material Property / TabularInput
Define temperature dependentmaterial property table forconductivity.
a. Fields: Create / MaterialProperty / TabularInput.
b. Enterconductivity field forField Name.
c. Select Temperature (T) forActive Independent Variables.
d. Click Input DataEnter the followingvalues:
e. Click OK.
f. Click Apply.
T Value
1 14.6538
6 22.6 8714 31.8197 e
conductivity field
a
b
f
c
d
To modify the content of aparticular cell, first click onthat cell, then type numberinInput ScalarData boxand press Enter.
8/7/2019 w01 SS Heat Transfer
9/20
Mar120, Workshop 10, March 2001 WS 1-9
Conductivity_fieldd
e
f
Step 3.Materials:Create / Isotropic / Manual Input
Create the relevant materialproperties for 17-4 pH stainless steel
a. Material: Create / Isotropic /Manual Input.
b. EnterStainless 17-4 pH formaterial name.
c. Click Input Properties.
d. Click inConductivitypanel.
e. Select conductivity_field.
f. Click OK.
g. Click Apply.
stainless 17-4 pH
After you Apply you will seestainless_17-4_pH inExisting Materials panel.
stainless 17-4 pH
a
b
c
g
8/7/2019 w01 SS Heat Transfer
10/20
Mar120, Workshop 10, March 2001 WS 1-10
Step 4. Properties:Create / 3D / Solid
Apply the steel properties to themodel
a. Properties: Create / 3D / Solid.
b. EnterPropthermal forProperty Set Name.
c. Click Input Properties.
d. Click inMaterial Name panel.
e. Select Stainless_17-4_PH.
f. Click OK.
g. Click in the SelectMemberspanel.
Stainless 17-4 pH d
e
f
Prop thermal
a
b
c
g
8/7/2019 w01 SS Heat Transfer
11/20
Mar120, Workshop 10, March 2001 WS 1-11
h. Select all solids withthe mouse.
i. Click Add.
j. Click Apply.
h
Select all solids by pressing andholding cursor to capture theentire geometry
i
j
8/7/2019 w01 SS Heat Transfer
12/20
Mar120, Workshop 10, March 2001 WS 1-12
Create the temperature loading atthe fixed end faces.
a. Loads/BCs: Create / Temp(thermal) / Nodal.
b. Enterleft_edgefor New Set
Name.
c. Click Input Data.
d. Enter 0 for Temperature.
e. Click OK.
f. Click Select ApplicationRegion.
g. Click inSelect GeometryEntities panel.
h. Select SurfaceorFacepicking icon.
Step 5. Loads/BCs:Create / Temp (Thermal) / Nodal
left_edge
a
b
c
f
50
d
e
g
h
8/7/2019 w01 SS Heat Transfer
13/20
Mar120, Workshop 10, March 2001 WS 1-13
i. Select Faces 1, 2, and 3.
j. Click Add.
k. Click OK.
l. Click Apply.
left_edge
left_edge
l
Solid 8.2 9.2 10.4
j
k
Face 1, 2, 3 @ 50C
Face 4, 5, 6 @ 135C
Face 3Face 2
Face 1
Face 4
Face 5
Face 6
i
The geometry may need to berotated in order to select the faces
AfterclickingApply,left_edge will
appearin Existing Sets window
8/7/2019 w01 SS Heat Transfer
14/20
Mar120, Workshop 10, March 2001 WS 1-14
Repeat steps a-l for a newtemperature load.
a. Enterright_edge for New setName.
b. OpenInput Dataform.
c. Enter135 for Temperature.
d. Click OK.
e. OpenSelect ApplicationRegionform.
f. Click into Select GeometryEntitiespanel.
g. Select faces 4, 5, and 6 forGeometry Entry.
h. Click Add.
i. Click OK.
j. ClickApply-.
Face 1, 2, 3 @ 50C
Face 4, 5, 6 @ 135C
Face 3
Face 2
Face 1
Face 4
Face 5
Face 6
g
The viewport looks like this afterboth temperature loads wereapplied at selected end surfaces
right_edge a
b
ej
135 c
d
f
i
h
8/7/2019 w01 SS Heat Transfer
15/20
Mar120, Workshop 10, March 2001 WS 1-15
Step 6. Loads/BCs:Create / Convection / Element Uniform
Create the temperature loading atthe fixed end faces.
a. Create / Convection / ElementUniform.
b. Enterconvection for New Set
Name.
c. Click Input Data.
d. Enter20 forConvection.
e. Enter30 forAmbient Temp.
f. Click OK.
g. Click Select ApplicationRegion.
30
20 d
e
f
convection
a
b
c
g
8/7/2019 w01 SS Heat Transfer
16/20
Mar120, Workshop 10, March 2001 WS 1-16
h. Click inSelect SolidsFaces panel.
i. Select Free faceofsolid
picking icon.j. Select the four outer
middle bar surfaces bypartly enclosing them withviewcornerpicking.
k. Click Add.
l. Click OK.
m. Click -Apply-.
m
j
This picks the four largersurfaces bounding thecentral body when you usethe default picking options.
Solid 1:11:10.1 1:11:10.2
1:11:10.3 1:11:10.4
hk
l
After clickingAdd, theselected solid will appearin the Application Region
window as shown
i
8/7/2019 w01 SS Heat Transfer
17/20
Mar120, Workshop 10, March 2001 WS 1-17
Step 7. Analysis: Analyze / EntireModel / Full Run
Submit the model for thermalanalysis.
a. Analysis: Analyze / EntireModel / Full Run.
b. Enterthermal_job1 for Job
Name.
c. Click Load StepCreation.
d. Enterthermal for Job StepName.
e. Click Apply.
f. Click Cancel.
thermal_job1
a
b
c
thermal d
e f
After clicking apply, thermalwill appear in the AvailableJob Steps window along with
the Default Static: Step
8/7/2019 w01 SS Heat Transfer
18/20
Mar120, Workshop 10, March 2001 WS 1-18
g. Click Load Step Selection.
h. Select thermal in Existing JobSteps window.
i.D
eselect Default Static Step.j. Click OK.
k. Click Apply.
g
k
Make sure thermal is the only entry in theSelected Job Steps window.IfDefault Static
Step shows up, remove it by clicking on it.
Once the Analysis is launched, you can monitorthe progress of the job by looking at thethermal_job1.out and thermal_job1.sts files.
h
j
i
8/7/2019 w01 SS Heat Transfer
19/20
8/7/2019 w01 SS Heat Transfer
20/20
Mar120, Workshop 10, March 2001 WS 1-20
Step 8. Results:Create / Quick Plot
Post process the results of thethermal analysis.
a. Results: Create / Quick plot.
b. Click Reset Graphics.
c. Select Temperature, Nodal inSelect Fringe Result window.
d. Click Apply.
The steady state temperaturedistribution should look like thisin the viewport window.
ba
c
d