W-SDRX1-MK3 100KHz - 2GHz Wide-band SDR Receiver

Full coverage reception from 100KHz to 2GHz SDR

Independent antenna inputs for HF and VHF/UHF

2 Micro USB connectors (Data & Power)

Very high dynamic range receiver

Low noise pin-diode band switching

Accurate and efficient band filters

Very clean audio reception

SMA gold plated antenna connectors

LED power and band indication

40MHz local oscillator for HF conversion

DBM balanced diode ring mixer

Small size board

Free software

Up to 3.2 MHz Sample rate (meaning 3.2MHz viewable on your screen)

The toggle switch will select the SMA antenna input and will switch between the HF SMA socket and VHF/UHF SMA socket. LED colour indicates which antenna socket is selected. BLUE = VHF and UP RED = HF

Connecting to a Smartphone

The W-SDRX1-MK3 can get power straight from your smartphone so there is no need for another lead making it easier to use and much more portable. Step 1 – Download SDR Touch from the Google Play store* Step 2 – Connect your smartphone into USB 1 on your W-SDRX1-MK3 with the white microUSB cable provided. (If the phone is connected through USB 2 the device will not be found**)

Step 3 – Open up SDR Touch and press the power symbol in the top left. (If a driver has not been installed the pop up message below will appear. Press OK and you will be re-directed to the Play store.)

Step 4 – Re-open SDRTouch and select "OK" to the pop-up saying

an external driver has been found. Step 5 – Enjoy using your W-SDRX1-MK3 from your phone and on the go *Demo version of SDR Touch is free. For full version you must download “SDR Touch Key”

for £6.49 (price at time of publication). Other apps are available. **To power the W-SDRX1-MK3 from mains plug a charger with a micro USB into USB2 and this will not take battery from your device.

Connecting to a computer Software Download: SDR Radio Software download from here: http://sdr-radio.com/Software/Download/Download-Kits (Scroll half way down the page and on the left, select where you want to download from) Also download the DLL Support here: https://meocloud.pt/link/a894d7f9-1fcf-4412-a5fe-eced48adddd0/-SDR-RADIO-Pro_RTLDongleSupport.exe/ Zadig Drivers for USB for Windows XP or Windows 7, 9 and 10 http://zadig.akeo.ie/

Extracting Files and Installing SDR-Radio: Extract the Zip files into a folder and run ‘install’ then follow the instructions to install the software

1. Click Next

2. Read through and accept the Terms and Conditions.

3. Choose the additional components you wish to install, default is all.

4. Select whether you want to install for all users on the computer or only the current user.

5. Select the location where you want to install the software.

6. Click finish and the software is almost ready to use.

Install Drivers

1. Open “-SDR-RADIO-Pro_RTLDongleSupport” to install the driver for the W-SDRX1-MK3.

2. Follow the same 2 -5 steps for installing SDR-Radio. When

selecting the location for the driver ensure it is in the same folder as the SDR-Radio.

Connecting to your Computer: Plug your SDR receiver into your laptop or desktop computer using a standard USB lead into USB1. You will hear a sound on your PC speaker indicating that windows has found the device.

Once the W-SDRX1-MK3 is connected properly find and open the ZADIG file which you downloaded, open and run it.

On the options, select ‘LIST all devices’ and choose RTL2838UHIDIR. Click the button to install the WINUSB drivers. Wait a few seconds and when all drivers are OK, you can check in your Device Manager that the drivers are as the picture.

After drivers are installed, open the SDR Radio program keeping the W-SDRX1-MK3 connected. Select ‘Yes’ on the pop up to add a definition. Select search and RTL SDR (USB) which will find the device and update the list. (If you are unable to find this definition ensure the .dll installed is in the SDR Radio software file)

Select “Converter” and then “manage”, this will allow you to select the IF

frequency 40 MHz

Your device will be found, select okay and the box below will appear. Click on the new device and start using your new W-SDRX1-MK3.

You may now run your SDR program Operation on HF.

Plug in your W-SDRX1-MK3 receiver

Switch the SDR toggle switch to HF, Red LED will light

Tune SDR Radio on the band you wish to receive

Reception in this mode is from 100KHz to 30MHz

Input antenna is HF

Operation on VHF/UHF:

Click OFF the Shift box

Switch the SDR toggle switch to VHF, Blue LED will light

Tune SDR Radio on the band you wish to receive

Reception from 30MHz to 2GHz

Input antenna is VHF

The SDR-radio program is very easy to work.

You have all modes for decoding as well lots of memories broadcast bands, amateur bands etc.

Yahoo Google group: https://groups.yahoo.com/neo/groups/sdr-radio-com/info

Plane Viewer RTL1090

GET software here: http://rtl1090.web99.de/

NOAA Weather satellites RX : http://www.rtl-sdr.com/rtl-sdr-tutorial-receiving-noaa-weather-satellite-images/

There are also many other freeware software packages available on the Internet that will work with your W-SDRX1-MK3 receiver.

Gnu radio Linux software: http://rtlsdr.org/softwarelinux

Android: https://play.google.com/store/apps/details?id=marto.rtl_tcp_andro

Other windows programs:

http://www.hdsdr.de/

Supplied by: Waters & Stanton Ltd, 22 Main Road, Hockley, Essex. SS5 4QS. UK. Tel: +44 (0)1702 206835 Fax: +44 (0)1702 205843

Web: www.wsplc.com Email: sales@wsplc.com