W 1CR

May 2011 Catalog

+ Blade Runner w/FREE Wall Mount $179.99, pg. 2E

BUILD YOUR OWN ADIRONDACK CHAIRS!• Single,Double,orChild'sChairs• Simple,EasySummerProjects• Step-By-StepInstructions• PlanSpecificHardwareKits

SeePage2ForDetails

Sale prices good April 30 through May 28, 2011

+ SAVE 5

0%

On 10

-Piece Forstner B

it Sets, pg. 153

+ SAVE 25%

On D

ust Extraction fittngs, pg. 154

15% Off May 13 & 14! See Page 166 For Details!

*Exclusions apply – see page 2 for details.

FREE140-Piece Square Drive Screw Sampler With A $65 Purchase!* $1999 Value!

BuildThisAdjustable3-in-1AssemblyTable!Woodcraft® magazinePaperPlan#149864•Made from two 3/4"-thick sheets of MDF and maple trim•Provides assembly surfaces in three sizes•Largest measuring 36 × 51" when both drop leaves are raised149864 .............................$12.99

+ SAVE 20% On Exotic Woods, pg. 2F

Credit Card Orders: 800 225-1153 Free Technical Advice: 800 535-4486 www.woodcraft.com

Technical Advice:Call Toll-Free 800 535-4486

[email protected] you need more information on any of the tools

that Woodcraft sells, give our technical staff a call. If they can't find a solution, they'll go right to

the manufacturer for the answer. Please call Monday through Friday from 8:30AM to 9PM EST.

Orders:Call Toll-Free 800 225-1153

Operators are on hand Monday through Friday from 8AM to 12 Midnight and 8:30AM to 5PM on weekends. Please complete the order form enclosed in this book and have your credit card

handy before you call.Visit us online for Canadian pricing

including duties and taxes.

Satisfaction Guaranteed – We Promise!

We’re absolutely confident that you’ll be satisfied with your purchase from Woodcraft! If you’re not, return it anytime within 90 days,

and we will gladly replace the product, give you credit, or refund your money, whichever you prefer. Woodcraft’s Guarantee does not

apply to power tools, which are subject only to manufacturer’s warranties. Special-order items

or manufacturer drop-ships are subject to a 25% restocking fee.

Customer Service:Call Toll-Free 800 535-4482

[email protected] Customer Service Representatives can help you with any questions you may have regarding your order. Please call Monday through Friday from 8:30AM to 5PM EST. If possible, please

have your order number for reference.© 2011 Woodcraft Supply, LLC. “Helping You Make Wood Work” is a trademark of Woodcraft Supply, LLC. Printed in the USA. Retail store pricing and promotions may vary from catalog. Sale prices good April 30 through May 28, 2011, unless otherwise noted. Not responsible for typographzical, photo or print errors.

22

New Products QUICK INDEX

Complete Index on page 165Description ...................................................PageAllNewProducts ......................2-2H,152-162,166Books .................................................2G, 90, 91, 134 Carving .........................2C, 2G, 87, 91-102, 107, 158Chisels .........................2B, 2C, 6, 25, 65, 66-67,103ClockSupplies .................................... 131-133, 153DustCollection ..2E, 3, 5, 6-10, 12-14, 15, 20, 154 Fasteners ...................... 57, 58, 123, 130,131, 152Files&Rasps.........................................88, 106-107Finishing ..................... 2D, 113-118,119, 156-158Glue.............. 2D, 110, 111-112, 113, 146, 155, 157 Hardware ......................................22, 119-129,152 Marking&Measuring ................................................. ................................ 2C, 2E, 18, 69, 127, 78-82,155 OrderingInfomation ............................................163OrderForm............................................................164PenKits .......................................137-145,160, 161PictureFraming...................................................... 43Planes............................................2B, 62, 63-64, 65Pneumatics .................................11,156, 158, 166PowerCarving ................2G, 8, 102, 103-105,158PowerToolAccessories .......... 2A, 2E, 2H, 3-11, 16, 17-27,43, 44, 81, 82, 152, 153, 156, 158, 162, 166PowerTools ................................................................ 2A, 2E, 2H, 3-10,82, 102, 118, 156, 158, 162, 166 ProjectSupplies .......................................................... ......................2E, 118, 134-136,155, 157, 159-161 RouterAccessories ................................................... .............2G, 2H, 7, 8, 10, 16, 19, 22, 27, 28-32,153RouterBits .......2H, 8, 29, 32, 33, 34-38,136, 166Safety ............ 2D, 15-16, 17, 21, 73, 101, 113, 154Saws ........................... 4, 8, 50, 51-54,65, 68, 152Scraping&Sanding 72, 73, 101, 107, 108-110,155Sharpening ......... 2A, 2C, 25, 82, 83-90, 108, 158 SharpeningService ...............................................89ShopAccessories ......................... 2D, 2E, 2H, 5, 16, 23, 26, 27, 38, 39-42,119, 152, 153, 155, 157, 158TimberFraming ............................................... 65, 66Vises&Clamps ........................................................... .....................43-47,48, 57,58, 144, 146, 152, 158 Wood ........... 2F, 2G, 134, 135, 143, 146-151,160Woodboring .................6, 25, 55-62,127, 129, 153Woodturning 2D, 2F, 69-77,135-145, 153, 159-162Workbenches ..................................... 2D, 26, 48-50

Cov

er Im

ages

: Jim

Osb

orn

ww

w.o

sbor

n-ph

oto.

com

Visit Your Local Woodcraft Store!

Everything in our catalog and more!• Classes & Demos • Stores Nationwide

• Expanded Product Lines • Lumber

Wood Sold Separately.

Visit Woodcraft On The Web!

SAMPLE

www.woodcraft.com Features: •New Products •Specials

•Closeouts•Gift Finder

•Contest Info•Online Videos

See www.woodcraft.com for the Woodcraft Store nearest you

Children’sAdirondackChairPlans&TemplatesMaking a Child’s Adirondack chair has never been easier! This kit has the plans and the templates in one package. Trace out the pieces, rough-cut them, then trim to final dimensions with a router and flush-trim bit. Assemble and fin-ish your chair according to the plans. Materials and toys not included. Hardware kit below contains carriage bolts, washers, nuts and screws needed for assembly of the child's adirondack.848908 .......................................................$24.99153018 child's hardware kit .......................$9.99

Offer Good 4/30/11 - 5/28/11. To Redeem: Bring this coupon in to any Woodcraft store. Coupon is required for redemption and must be surrendered at time of purchase. HIGHPOINT XT® Square Drive Screw Sampler (152761) FREE With A $65 Purchase. This Coupon Cannot Be Used With The Purchase Of Any Product Featured In This Sales Flier. One Time Use Off Your Total Purchase Of Regularly Priced Merchandise. Minimum $65 Purchase Required Before Tax. One Per Customer. Valid In Retail Stores Only. No Cash Value. Offer Cannot Be Combined With Any Other Coupon Or Discount Offers. Excludes All SawStop & FESTOOL Products, LEIGH Jigs, Dowelmax Products & Gift Cards. Coupon Code: 50211

*Exclusions apply – see page 2 details.

FREE140-Piece Square Drive Screw Sampler With A $65 Purchase!* $1999 Value!

Woodcraft®

magazine AdirondackChairPlanThe Adirondack chair is an American icon that evokes images of lazy summer days at the lake or seashore. This Woodcraft× magazine Classic× Project Plan takes you step by step through the construction process using detailed instructions, 11 “close up” construction photographs, an exploded view illustra-tion, bill of materials and cut list. Full size patterns are included for easy transfer of chair parts to your material, or create pattern routing templates. This is a perfect weekend project that any woodworker will enjoy building…..and using! The Adirondack hardware kit below contains all the carriage bolts, bolts, nuts, washers and screws necessary for Woodcraft® magazine plan.149235 .....................................................$12.99153018 Woodcraft® magazine Adirondack ....... hardware kit ..................................$9.99830818 Snappy 3/8" plug cutter ..............$13.99830819 Snappy 1/2" plug cutter...............$16.99143766 18" x 24" transfer paper, 6 pcs. ..$8.95

$1499AdirondackPlanValuePackBuild a single or double Adirondack, as well as an Adirondack foot rest. This value pack includes a separate plan for each piece, with full-sized patterns for all curved pieces. Hardware kit contains bolts, washers and hinges only. Screws must be purchased separately.149771 • reg. $17.99152183 • hardware kit $19.99

Helping You Make Wood Work® 2A

New ProductsNew Products The Imperial Blade company is committed toproducing high quality products that are madein theUSA! Imperial blades offer woodworkers a selection of blades and accessory attachments for the industry's most popular multi-tools. The Imperial blades fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool.

(A)IMPERIAL Fine-ToothWoodSawBladesFor use when cutting wood, drywall and plastic, the fine-tooth configuration is specifically designed for precision wood applications. They can be used for cutting under the kick plate when installing new kitchen flooring, undercutting door jambs or flush cutting tongue-and-groove. They have a flush-cut design to allow the operator to lay the blades flat on surfaces perpendicular to the cut. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. Model TPI Width Depth Each152548 MM120 16 3/8" 15/8" ..........$12.99152549 MM110 16 3/4" 15/8" ..........$12.99847745 MM100 16 11/4" 15/8" ..........$12.99847747 MM150 16 21/2" 15/8" ..........$14.99

(B)IMPERIAL Coarse-ToothWoodSawBladeFor use when cutting wood, drywall and plastic, the coarse-tooth saw blade has larger teeth for aggressive cutting. It is designed for cutting wood, drywall and other soft materials, but will cut through a few nails. Almost as fast as a reciprocating saw, they can be used for cutting under the kick plate when installing new kitchen flooring, undercutting door jambs or flush cutting tongue-and-groove. They have a flush-cut design to allow the operator to lay the blades flat on surfaces perpendicular to the cut. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. Model TPI Width Depth Each847746 MM200 12 11/4" 15/8" ..........$12.99847838 MM200 10-pack .........................$89.99847748 MM250 12 21/2" 15/8" ..........$14.99847846 MM250 10-pack .........................$99.99

(C)IMPERIALBi-MetalSawBladeFor cutting sheet metal, aluminum, copper piping, wood, drywall and plastic, the universal Bi-Metal saw blade is made with the industry’s highest quality high-speed steel material. Comes with a 14-teeth per inch blade to cut wood and nails with ease. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. Model TPI Width Depth Each847749 MM300 14 11/4" 15/8" ..........$15.99847847 3-pack .......................................... $34.99847848 10-pack ...................................... $109.99

(D)IMPERIAL3"HSSSegmentedSawBladeThe MM410 cuts wood, fiberglass, sheet metal, drywall, and plastic and is a high-speed steel flat saw blade that is segmented on one side. The high-speed steel material is rigid, allowing the blade to cut through harder wood and sheet metal up to 1mm thick as well as carbon fiber, fiberglass, and nails. With this segmented blade you can make cuts at right angles and not worry about over-cutting. Ideal for working in corners. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 31/8" diameter, 11/16" cutting depth.152551 ...................................................... $34.99

A BC

D

E F G

(E)IMPERIALFlexibleScraperBladeThe MM510 is a mushroom-shaped flexible scraper that is ideal for cutting silicone and soft glazing compound as well as separation of insulating glass. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool.152550 .........................................................$9.99

(F)IMPERIAL 11/4"CarbideBladeThe MM640 is suitable for grout, plaster and other like materials. The Flush Cut Carbide Grout Blade takes out damaged tile grout, and cuts grooves in plaster, porous concrete and similar construction materials. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 11/4" width, 1" depth.847750 .......................................................$24.99

(G)IMPERIALDiamondBladeThe MM730 is suitable for all marble, epoxy resin and porcelain mortar grouts. The diamond blade will remove tough grout from between tiled surfaces without damaging the tile. The long lasting blade enables continuous work on large projects. This blade is tough enough for commercial applications such as cutting out marble and concrete joints or for sinking ducts in plaster, brick, pumice and honeycomb stone or autoclave aerated concrete. These premium, long lasting blades are designed specifically for harder grouts. Designed to fit Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool. 30/40 Grit Mesh.152552 .......................................................$59.99

Fein MultiMaster, Bosch Multi-X, Craftsman Multi Tool, Dremel Multi-Max and Chicago Multi-Tool are trademarks of their respective companies.

IMPERIAL VarietyBlades848697 1 each of MM150, MM200, MM300 ..... ...................................................... $34.99

$34999FEINMultiMaster 250QLimitedEditionIncludes: FEIN MultiMaster FMM 250 Q, Triangular Sanding Pad, 5 Each Sanding Sheets 80, 120, 180 Grit; Universal E-Cut Saw Blade (13/4"), HSS Segment Saw Blade, Carbide-Tipped Segment Saw Blade, Rigid Scraping Blade; Dust Extraction Attachment; Perforated Triangular Sanding Pad, 5 Each Perforated Sanding Sheets 80, 120, 180 Grit; Carbide Rasp (Triangular, Perforated); 21/2" Wide Standard E-Cut Blade; Sanding Pad Kit; 13/8" M-Cut Saw Blade, Narrow Cut M-Cut Saw Blade And Tool Case.• High Performance 250-Watt Motor • Electronic Speed Control • Designed For Continuous Use • Oscillates 11,000-20,000 OPM• 8-Point Tool Mount For Outstanding Torque Transfer152917 • reg. $349.99

QuantitiesAreLimited

Includes Over $475 InAccessories!

SHARPENING SWEEPSTAKES

ENTER

To WIN

WINNER RECEIVES:

148103 Tormek T-7 Water-Cooled Sharpening System144269 Norton Waterstones, 4-pc. Set 149479 WoodRiver® Diamond Grinding Wheel 8" 120 Grit150780 8" Slow-Speed Grinder

Visit Your Local Woodcraft Store or woodcraft.com For Details!


New Products

WoodRiver®

MaxAwlAwls make holes, usually to start screws in wood or push thread or lace through leather. The WoodRiver®

Max Awl is an elegant, beautiful interpretation of this age-old tool. Overall tool length is approximately 5".The base of the 3" shank is 5/8" in diameter and tapers to a fine point at the tip. 151300 .......................................................$19.99

WoodRiver® SpokeshaveSpokeshaves are used to shape and smooth chair legs, wheel spokes and rods of all sorts. The WoodRiver® shave is a robust casting of ductile iron featuring a high carbon RC60-64 blade and an adjustable front shoe to control the depth of cut. The heavy (1.05 lbs) cast iron body actually increases tool control, making it easier to shave with one or two hands. This, combined with the adjustable shoe for depth control will make this one of your favorite hand tools.150740 .......................................................$49.99

2B

New Products

#4

WoodRiver® UltimateV3BenchPlaneSetWoodRiver® V3 Bench Planes are based on the clas-sic, time-tested Bedrock design. The original Bedrock Planes have proven to be among the most enduring, collectable tools in all of woodworking, and for good reason—they work. WoodRiver® V3s are their modern equivalent. Although not faithful reproductions, they are inspired interpretations of these classics. The Ultimate V3 Set includes 4 planes— #3, #4, #5 and #6—each featuring heavy stress relieved ductile iron castings, precise machining and extra thick plane blades. Sold separately on p. 63.152762 ..................................$549.96 SAVE$50

#3

#5

#6WoodRiver®

AdjustableMouthBlockPlanesThese WoodRiver® Block Planes are based on the venerable Stanley #65 low angle and #18 standard angle “Knuckle Cap” design, generally considered one of best block plane designs around. With the widely recognized comfortable chrome plated Knuckle Cap, these block planes look like the standard and low angle versions of yesteryear. Upon closer inspection you’ll notice changes to the base castings which not only strengthen historically weak points of the original design, but also improve the blade bedding area. Improved blade adjustment mechanisms allow for crisp, easy adjustment of the blades using the rear adjustment knob. The adjustable mouth is very smooth to operate and allows fine tuning of the mouth for work ranging from coarse to creating whisper thin shavings. The stress relieved ductile iron castings are precision machined, flat and square. Each plane is outfitted with a high carbon tool steel blade, which is hardened to RC58-63 for maximum edge retention and ground to a 25° bevel. We recommend sharpening the blades prior to use, however they’re impressively sharp right out of the box. The bed angles are 20° for the Standard and 12° for the Low Angle. 2" W x 7"L with 15/8" W, 0.125" thick blade. Mixed plane sets sold on p. 155.151124 (A) 20° standard angle ............................................................................................................$89.99151125 (B) 12° low angle .....................................................................................................................$89.99152764 Ultimate block plan kit, A & B above ................................................................$159.98 SAVE$20

A B

WoodRiver® ChiselPlanesThink of a chisel plane as a chisel perched atop a wedge to control the angle and edge in front and a depth adjustment to control the cut. This simple idea has many practical applications from removing excess glue to trimming proud dowels and pocket hole plugs. Available in both a small and large ver-sion, WoodRiver Chisel Planes will be a welcomed addition to your tool chest. The small chisel plane is 41/2" long (5" OAL) by 13/4" wide and weights 11/2 lbs. The large chisel plane is 91/2" long by 21/4" wide and a hefty 31/2 lbs. Both feature stainless steel investment cast bodies and Mn65 steel blades. 151301 (A) small ....................................... $59.99151302 (B) large ......................................$129.99

B

A

WoodRiver®CrankedNeckChisel/PlaneSetThis unique crossover design makes for an extremely useful tool. The offset handle permits the short chisel blade to glide along the surface like a plane removing excess dried glue with ease, cleaning out corners, trimming protruding dowels or pegs and who knows what else! Set includes 1 Bubinga handle and 4 interchangeable blades: Diamond Point, Straight, Left and Right Skew. Blades are 1" x 13/8" Mn65 Spring Steel hardened to RC56-60.151240 .......................................................$39.99

WoodRiver®UltimateCabinetmaker’sKitThe WoodRiver® Ultimate Cabinetmaker’s Kit includes the three planes cabinetmakers prefer: the WoodRiver V3 #4 plane for smoothing, the WoodRiver® V3 #6 Foreplane for joining work, and the WoodRiver® Low Angle Block Plane for trimming end grain and doing on the spot trimming. The WoodRiver® V3 Bench Planes are based on the clas-sic, time-tested Bedrock design while the WoodRiver®

Block Planes trace their ancestry back to Stanley’s #65 and #18 “knuckle cap” block planes. Neither designs are faithful reproductions, but rather inspired interpretations of classics. All feature heavy stress relieved ductile iron castings, precise machin-ing and extra thick blades. The resulting tools offer extraordinary performance and unsurpassed value. 152763 ..................................$369.96 SAVE$40

#4 #6

WoodRiver® SideRabbetPlaneEarly side rabbet planes such as Stanley’s 98/99 were available in right- and left-hand versions. Combina-tion planes like the Preston 1369 and Record 2506/2506S offered the convenience of two blades in a single plane. The WoodRiver® Side Rabbet Plane takes its linage from the 2506S and incorporates two manually adjusted blades and an adjustable depth stop. This handy tool is perfect for cleaning up rebates and grooves, ensuring a proper fit. The plane’s precisely machined body is manufactured from 40cr tool steel with a reversible, adjustable depth stop and features T10 steel blades hardened to RC59-63.The front of the plane is easily removable for conversion to a bull nose configuration for corners and stop dadoes.151239 .......................................................$69.99

New Products

Helping You Make Wood Work® 2C

New Products

WERA® KraftformKompakt267-in-1BayonetScrewdriverIf you didn’t know better, you would think this screwdriver might have been issued by the British Secret Intelligence Service! The Kraftform Kompakt Bayonet Screwdriver is a convenient all-in-one tool combined with Wera’s quality and innovative design. Pressing the quick release ring extends the shaft for use; pressing the rear button opens the handle revealing storage for six different driver bits. The shaft incorporates a quick release locking chuck and spinner mechanism that can be removed for use in cordless drill drivers. Retracted length is less than 6". Includes 6 Wera “professional quality” insert style bits ( 2 SL, #1PH, #2PH, #1 SQ, #2SQ) and a durable nylon belt clip pouch.845196 .......................................................$39.99

Closed

Open

FLEXCUT™PocketJackforCarvin'Flexcut’s Pocket Jack is a smaller 4-blade version of the original Carvin' Jack. Its multi-tooled design caters to the specific needs of woodworkers and carvers alike. At 3 ounces and with a closed length of 41/4" you will hardly even notice it in your pocket. Pocket Jack includes the following blades: Detail Knife (15/8" long), straight gouge (17/8" long), scorp (11/16" long) and v-scorp (1" long). 151338 .......................................................$79.99

FLEXCUT™ 3-PieceKnifeStarterSetMade from Flexcut’s high quality spring steel, tempered to a hardness of Rc 59-61, and fitted with comfortable, ergonomic ash handles. Each tool approximately 61/2" in length and is pre-sharpened and ready to use. Set contains one each of; cutting knife, detail knife, and roughing knife.151121 .......................................................$49.99

PFEILSwissMadeIntermediateSetof4ToolsSpecially forged for Woodcraft, these intermedi-ate sized, professional style tools are 2" shorter than our regular Swiss tools for easier control and greater responsiveness. These precise tempered high-grade steel tools are sharpened, honed and buffed for immediate use with an edge that will stay sharp for many enjoyable hours of woodcarv-ing. These delicately balanced tools work well for getting into confined areas. The overall length is 8" with 31/2" blades and 41/2" octagonal hardwood handles. The tool set includes: 6mm #12 V-Parting Tool, 7mm No. 8 Gouge, #1 18mm Double Bevel Straight Chisel and a 36mm Chip Carving Knife.05V21 .......................................................$89.99

FLEXCUT™ WidePalmToolSetsAs suited to smaller projects (and precision work) as to roughing out blanks, these 5" tools fit com-fortably in the palm of your hand. Flexcut blades, as the name implies, are flexible to give you more control over your cuts. Made of high carbon spring steel, the tool shank gives just enough to follow the contour of carving, eliminating the need to have a handful of traditional tools to finish a single profile. This unique material also contributes to its excellent edge holding capability as the shank is tempered like a spring while the tip is hardened to Rc 59-61, then hand honed and polished. The handles are ergonomically designed to increase the comfort and ease of use. Each tool is pre-sharpened and ready to use.4-PiecePalmSetIncludes: #3 x 5/8" sweep, #5 x 9/16" sweep, #8 x 3/8" sweep, and a 3/8" 70° V-tool.140236 .......................................................$59.99

9-PiecePalmSetIncludes: #11 x 1/8" sweep, #3 x 3/8" sweep, #3 x 5/8" sweep, #5 x 9/16" sweep, #6 x 5/16" sweep, #8 x 3/8" sweep, 1/4" 70° V-tool, 3/8" 70° V-tool, #2 x 5/16" double bevel skew.815235 ....................................................$129.99

STANLEYSweetheart750SocketChiselsReturning to their traditional roots, Stanley’s new 750 socket chisels are forged from high chrome-high carbon English tool steel in the famous steel city of Sheffield and hardened to RC58-62. FSC Certi-fied Genuine English Hornbeam (a member of the Carpinus genus) is used for the handles. Chisels range in length from 81/2" to 103/4". Handles are approximately 47/16" in total length, with a 35/16" comfortably shaped grip area and a 11/8" tenon which fits into the socket on the chisel. Handles must be set in the socket prior to use. Like all chisels, these will require some flattening of the backs and honing before use, but we found them well-balanced and quite light. We all liked them so much we think these could easily become our favorite set of chisels. Sets come with soft leather tool rolls for storage, which can also be hung up for easy access to tools when in use.152810 1/8" ................................................ $31.99152811 1/4" ................................................ $32.99152812 3/8" ................................................ $33.99152813 1/2" ................................................ $34.99152814 5/8" ................................................ $35.99152815 3/4" ................................................ $36.99152816 1" .................................................. $38.99152817 11/4" ...............................................$39.99152818 4-pc. w/tool roll .........................$129.99152819 8-pc. w/tool roll (shown) ...........$229.99

Save

20%

$11599Flexcut™6-PieceMalletSet• Made With Flexcut’s High-Quality Spring Steel• Tempered To A Hardness Of RC 59-61• Fitted With Octagonal Ash Handles That Can Be Driven By Hand Or With A Mallet• Includes: 3/8" x 60° V-Tool, #11 x 1/4" Sweep, #10 x 9/16" Sweep, #7 x 7/16" Sweep, #5 x 11/16" Sweep, And A #3 x 1" Sweep151122 • reg. $144.99

$1499PFEILSwissMadeMarkingKnife,Large• K720 Steel Blade • 60° Ground Point • Left Or Right Handed • Round Bubinga Handle• Fits In The Hand Like A Pencil05Z25• reg. $19.99

Save$5

$99923-PieceHobby&CraftToolSetLarge Assortment Of Knives, Blades, And Accessories 144553 • reg. $14.50

Save$450


New Products

2D

PerfectMatchStainMarkerFelt-tip markers are great for touch-ups, but if the color isn’t quite right you often have to settle for “close enough.” Say goodbye to close enough with the Perfect Match Stain Markers, which have no color in them out of the box. Instead, you load each marker with the exact stain you are using or with a customized color to create the perfect match. Not only are these markers easy to load and use, but they are also reloadable for multiple uses. One marker per package.152587 .........................................................$5.99

3MTMP100DisposableRespiratorThe 8293 P100 Disposable Respirator offers the highest level of NIOSH rated filtration efficiency in a maintenance-free respirator. Excellent for lead abatement, this respirator protects against sub-stance specific regulated particles not including asbestos. It features a 3M™ Cool Flow™ Exhalation Valve, a face seal, adjustable nose clip, lightweight construction and an all filter design. Meets 42 CFR84. Individually bagged. 152794 .......................................................$12.99

Inside/OutsideDigitalCalipersTaking exact measurements of your turnings and other projects has never been so easy. Accurate to within +/- 0.01", these calipers feature spring-loaded jaws and an easy-to-read digital display screen. Measurements can be taken in millimeters, inches, or fractions. To maintain a specific measurement the blades can be locked down by tightening the thumbscrew. 847516 (A) outside digital caliper ........... $34.99847638 (B) inside digital caliper .............. $34.99

A

B

HoneRiteGoldHoneRite Gold is a universal grinding, honing and lapping additive that makes water non-corrosive. What? Water non-corrosive! HoneRite Gold changes the water not only making it non-corrosive but also deposits protection onto the steel in the form of water soluble corrosion inhibitors. Now, you don’t need copious quantities of paper towels and rust inhibitor after sharpening…just a quick dry off and you’re ready. Each 250ml bottle is a concentrate that makes over 6 quarts of “sharpening fluid.” Storing fluid in plastic containers when not in use will prevent fluid loss due to evaporation. HoneRite Gold is safe for use with all types of waterstones whether manmade or natural. 152586 .......................................................$24.99

BriwaxChaiRXBriwax ChaiRX is first aid for loose chair joints. Not too long ago, complete disassembly would have been required to fix a chair with loose joints. Not anymore! ChaiRX is injected into the joint via a small hole that you drill, and the thin unique formulation penetrates the wood cells, permanently swelling the joints and bonding them together. In just 12 hours, your chair will be wiggle free and ready for service. Each package contains 4 oz. of ChaiRX, a syringe and 3 needle tips. Complete instructions for application and cleanup are included.152720 .......................................................$14.99

BarrelBond5-MinuteGelGlue,2oz.BarrelBond is the best pen turner’s glue we’ve used – ever. The two-part epoxy gel formulation is easy to mix and use, and the five-minute open time is enough to glue up multiple tubes. What else? It is gap filling, waterproof, flexible, easy to trim, easy to sand, non-sagging and has an unlimited shelf life. Our favorite features are the gap filling and flexibility, because when properly applied, these characteristics mean fewer pen blank “blowouts”.152719 .......................................................$14.99

TheBullzeyeWoodturner’sCenterFinderTemplates make tasks much easier, and this one is no exception. Made from durable 1/8" acrylic, with circles marked at 1/4" increments, The Bullzeye makes finding the most desirable turning area in irregular shapes quick and simple. Position the template on the wood, select the position that allows you to utilize the best figure and yield, and then, using an awl in the center hole, scribe a circle on the wood with a pen or pencil. Defects are easily avoided, or “character” areas can easily be included. Template will have a maximum yield of 10".846243 .......................................................$14.99

LegUp™Getting sheet goods up onto your table saw can be a real pain in the back! With the Leg Up™ Panel-Lift you can perform this task quickly and safely since this tool uses leverage, not strength, to lift cumber-some sheet goods. The Leg Up™ mounts quickly and easily to the edge of your saw’s table or to the fence rail and you are ready to go. Simply place bottom of panel in the ‘hook’ and rotate or ‘flip’ the panel onto the table saw. Mounting hardware included. USA.842599 .......................................................$49.99

GorillaGripper®Moving plywood, drywall or any sheet goods has just become easier. Simply slip Gorilla Gripper× over the center of the panel and lift. The leverage created by the weight of the panel and the unique jaws of the Gorilla Gripper× make it easy for one person to carry a panel. No more strained muscles or blindly bumping into everything in our shop!842598 SAVE$5! .......reg. $49.99 SALE:$44.99

ROCKWELLJawstandNeed a second set of hands for your next project? You need the JawStand from Rockwell. This easy-to-use work support stand is ideal for holding, clamping, and feeding large work or sheets of materials. The JawStand comes fully assembled and ready for use, then, the stand folds up for quick. Low friction slide, marked height adjustment, swivel-ing head, fully assembled.413419 ......................................................$69.99

New Products

Helping You Make Wood Work® 2E

DEULEN Jointer/PlanerKnifeSharpeningJigsDan Deulen created these simple sharpening jigs that make sharpening jointer and planer knives easy,cost-effective and fast. The key to the Deulen Sharp-eners are the two brass blade holders, inset into the hardwood handle, that hold the blades securely and at the proper angle. With a blade in each track, it is a simple matter of holding the handle and rubbing the blades against an abrasive surface. We recom-mend Deulin’s PSA Abrasives pack which contains six abrasive strips in a progression of grits starting at 120 followed by 150, 180, 220, 320 and ending with 400 grit for final polishing. It couldn’t be easier, and the proof is performance. This is so easy to do, you’ll no longer put off sharpening your blades. Your machine won’t have to work as hard and the wood surface will be smoother with less tear-out. Have more than two blades? No problem! Dan has worked out a system of alternating the blades that takes just a little more time but yields the same fantastic results. Each sharpener comes with writ-ten instructions, a hex wrench and a short how-to video. Two sizes are available: 6" and 12" models. Abrasive paper pack sold separately.152867 Deulen 6" Jig ................................$49.99152868 Deulen 12" Jig ..............................$89.99152869 Deulen PSA Abrasive pack ...........$8.99

Handi-ShimN i f t y c o l o r coded plastic shims in four specific sizes for use any-where a shim or spacing is needed such as leveling door frames, window frames and kitchen cabinets or to set spacing such as the distance between ceramic tiles. You can even carry them around with you to level annoying restaurant tables. Our 40-piece assortment has 10 of each of the following thicknesses: 1/32", 1/16", 1/8" and 1/4" or (in order) green, red, white and blue. 149801 .........................................................$5.99

FESTOOLRO90Multi-ModeRotexSanderThe RO 90 DX could easily become the most versatile tool in your shop. Equipped with 1/2 horsepower, the RO 90 is prepared to tackle nearly any sanding task. Easily switch between three differ-ent sanding modes with the flip of a dial for aggressive sanding, finish sanding and delta sanding. Switch from circular pad to delta-shaped pad in seconds with no tools required. The lightweight, ergonomic design makes sanding, even overhead, effortless. Includes: New SYS 2 T-LOC Systainer, StickFix Soft Round Sanding Pad, StickFix V93 Delta Sanding Pad, Edge Protector, Plug-It Power Cord, Abrasives Sample Pack and instruction manual. 571823 .................................................... $375.00497687 T-LOC Abrasive Systainer ........... $65.00

SketchUp For WoodworkersDVDSketchUp is a 3-D modeling program available as a free download from Google. Bob Lang, an avid woodworker and SketchUp expert, has created a DVD set, SketchUp for Woodworkers Part 1: Get-ting Started and Part 2: Advanced Techniques, that provides step-by-step instructions for using SketchUp from a woodworker’s perspective. With Bob’s guidance and easy-to-follow instructions, you learn to set the parameters in SketchUp to optimize the program for woodworking and how to take advantage of the speed and accuracy of this time-saving modeling software.848090 DVD Part 1: Getting Started .......$29.95848091 DVD Part 2: Adv. Techniques ......$29.95

Save 50%GRÖZStainlessSteelCabinetmaker’sRule• Made Of Hardened Stainless Steel• Deeply Engraved Graduations• Finest Graduations Are In 64ths And .5mm• Rear Face Displays Inch To Metric And Fraction To Decimal Conversion Table 140655 6" ................... reg. $3.99 SALE:$1.99140656 12" ................. reg. $8.99 SALE:$4.49140659 24" ............... reg. $14.50 SALE:$7.25140657 40" .............. reg. $25.50 SALE:$12.75

$17999

FREE Wall Mount – $4999 Value!*

RockwellBladeRunnerPortable, multipurpose precision cutter that utilizes any T-Shank jigsaw blade. The variable-speed motor control and simple blade changing mechanism allow you to cut wood, metal, plastic aluminum and ceramic tile. Includes: Wall mount bracket, miter gauge/rip fence, five T-Shank jigsaw blades and manual.152581 Rockwell Blade Runner • $179.99413684 Circle Cutter • $29.99413685 Picture Frame Cutter • $29.99*FREE Wall Mount With Purchase Of 152581.

Specs:Weight: 221/2 lbs.Overall length: 4111/32" Base plate length: 235/8" Width: 141/4" Min. height: 2115/32" Max. height: 3029/32

498507 .................................................... $375.00

FESTOOLCTWorkcenterWCR1000The CT Workcenter provides a con-venient way to keep your tools and accessories close at hand, without cluttering your valuable workspace. This unit can be mounted easily to all of Festool’s larger dust extractors like the CT22, CT26, CT33 and CT36. The Workcenter offers freedom of movement throughout the shop or jobsite. The CT Workcenter features numerous options for hanging an assortment of tools and accessories, plus height adjustable columns, al-lowing for easy storage of task-specific Systainers, keeping critical items within arm’s reach. Includes: Workcenter WCR 1000, rotary shelf, double hook, double tool rest hook, adjustable shelf, and (6) single prong hooks. Special Note: Does not mount to CT MINI or CT MIDI.

FESTOOLCompactCleaningSetwithT-LOC10 pieces packed into Festool’s new #1 T-LOC Sys-tainer. Compatible with all Festool Dust Extractors. Includes: T-LOC Systainer, 36 mm Plastic curved hand tube, 36 mm Plastic extension tubes, 36 mm Plastic interchangeable floor nozzle, 36 mm Plastic crevice nozzle, and 36 mm Plastic upholstery nozzle. 497697 .......................................................$77.00

Call, Click, or Walk-inIt's Easy To Get To Woodcraft

800225-1153www.woodcraft.com


New Products

2F

BalticBirchPlywoodBaltic Birch, aka 'Russian Birch', is a popular panel best known for its light color, strength, multi-ply construction, and affordable cost. Our sheets are graded as B/BB (or 3-B) and is the very best grade available. This means that one face, B, will be a whole natural wood surface, no splices, have no patches (plugs that are used to cover defects) but may contain knot pattern or mineral streaks. Suit-able for staining or painting. The other face, BB, and the inner plies will contain patches and tight, and not so tight knots. The best grades of Baltic birch plywood offer the quality necessary for the construction of fine cabinetry. In addition, Baltic Birch Plywood is an excellent material for drawer sides and bottoms, skateboards, as well as jigs and fixtures, and scroll saw work.131138 1/8" (3mm) x 12" x 12" ....................$1.50131405 1/8" (3mm) x 12" x 30" ....................$4.99131400 1/8" (3mm) x 24" x 30" .................... $7.50152980 1/8" (3mm) x 30" x 48" ..................$14.99131139 1/4" (6mm) x 12" x 12" ....................$1.99131406 1/4" (6mm) x 12" x 30" ....................$5.99131401 1/4" (6mm) x 24" x 30" ....................$8.99152979 1/4" (6mm) x 30" x 48" ................. $18.99131140 3/8" (9mm) x 12" x 12"....................$2.99131407 3/8" (9mm) x 12" x 30" ................... $7.99131402 3/8" (9mm) x 24" x 30" ................. $11.99152978 3/8" (9mm) x 30" x 48" .................$23.99131141 1/2" (12mm) x 12" x 12" ..................$3.99131408 1/2" (12mm) x 12" x 30" ..................$8.99131403 1/2" (12mm) x 24" x 30" ................$14.99152977 1/2" (12mm) x 30" x 48" ................$29.99131409 3/4" (18mm) x 12" x 30" ...............$13.99131404 3/4" (18mm) x 24" x 30" ...............$19.99152976 3/4" (18mm) x 30" x 48" ...............$39.99

YucatanRosewood(Dalbergia yucatensis) Yucatan Rosewood is a hard, light-red-dish cinnamon brown wood with darker-reddish brown str ipes from the regions of Central and South America. It turns well and has fewer allergenic properties than other Dalbergia, such as Cocobolo and Honduras Rosewood. Com-monly used in the region for furniture, musical instruments, and sports equipment.152890 11/2" x 11/2" x 3" .....................New$1.99844924 11/2" x 11/2" x 6" .....................New$2.99149788 11/2" x 11/2" x 12" ............................$5.50843943 11/2" x 11/2" x 18" ....................New$7.99847341 11/2" x 11/2" x 24” ..................New$8.99149789 2" x 2" x 12" ....................................$9.99841825 2" x 2" x 24" .........................New$16.99150918 1/8" x 3" x 24" ................................$13.50150919 1/4" x 3" x 24" ................................$13.99150920 3/8" x 3" x 24" ................................$14.50150921 1/2" x 3" x 24" ................................$15.99150922 3/4" x 3" x 24" ................................$17.50841827 2" x 5" x 5" .............................. New$9.99846029 2" x 6" x 6" ...........................New$12.99842035 3" x 3" x 12" ..................................$18.69149791 3" x 5" x 5" .....................................$13.99843030 3" x 6" x 6" ................................... $18.99842635 3" x 8" x 8" ....................................$29.99

ArgentineanOsageOrange(Maclura tinctoria)Unlike the common domestic Osage (Maclura pomifera) which darkens considerably with age, this Argentinean species tends to keep its deep golden orange color. The heartwood is accentuated by bands of darker and lighter grain. This wood is heavy, hard, dense and stable, yet turns well and polishes to a deep luster.838057 11/2" x 11/2" x 12" .........................$4.99841807 11/2" x 11/2" x 18" ......................... $7.25847322 11/2" x 11/2" x 24" ..........................$9.99838059 2" x 2" x 12" .................................. $8.79841878 2" x 2" x 18" ................................$12.99842801 2" x 2" x 24" .................................$17.75838061 2" x 4" x 4" ....................................$6.59838062 2" x 5" x 5" ....................................$9.99838063 2" x 6" x 6" ..................................$13.99838060 3" x 3" x 12" ................................$19.99150702 3" x 5" x 5" ..................................$12.99838214 3" x 6" x 6" ..................................$19.99

Tamboti(Spirostachys Africana) It is a rare wood with figure that is molted and banded, sometimes with visible growth rings. A hard, dense wood, it is lustrous and has a powerful but pleasant scent that is sweeter than sandalwood. This is one of the more beautiful African woods and is used mostly for carving, turnings and luxury furniture. Swaziland.847340 11/2" x 11/2" x 3" ..............................$2.50841480 11/2" x 11/2" x 6" ..............................$4.50838095 11/2" x 11/2" x 12" ............................$8.50841822 11/2" x 11/2" x 18" ..........................$16.99838096 2" x 2" x 12" ..................................$14.99

FiguredMapleBilletsThese kiln dried billets are surfaced two sides and range in size from 7-11" wide, 22-28" long and 9/4 to 10/4 (21/4" to 21/2") thick. Figured Maple is prized for its beauty. The “figure” can be quilted, flame, tiger, curly or fiddleback. These special pieces of wood are frequently used in the manufacturer of musical instruments. Our billets come from one of the leading suppliers of music grade wood to luthiers around the globe. These billets, while excellent examples of figured maple, have a minor defect—either a discoloration or minor pin knot that does not allow them to be graded instrument quality. 152788 (A) flame ........................................$49.99152789 (B) quilted .....................................$69.99

B

ATineo(Weinmannia) This unique wood from Chile has golden sapwood when first milled that darkens to a rich American cherry within a month or two. Heartwood is strikingly beautiful with a bluish-black variegated stripe through pinkish-red. Tineo has been used to make Steinway pianos and the interior of high-end sports cars. 152750 3/4" x 3/4" x 5" (5-pc.) ...................$10.99152746 1 x 11/2" x 12" .................................$9.99152747 2" x 2" x 12" ..................................$14.99152748 2" x 6" x 6" ....................................$20.99

Save 20%EastIndianRosewood(Dalbergia latifolia)An Excellent Turning Wood Featuring Purple-Brown Heartwood With Beautiful Figuring Of Darker Streaks Reg. SALE:838052 1.5" x 1.5" x 12" ............. $4.50 $3.60841877 1.5" x 1.5" x 18" ............ $6.99 $5.59838053 2" x 2" x 12" .................... $8.99 $7.19841746 2" x 2" x 18" .................. $13.99 $11.19131571 2" x 6" x 6" .................... $14.99 $11.99

Save 20%Redheart(Erythroxylon mexicanum) The bright red background of redheart is host to a number of very interesting streaks and closed knots. It is smooth and tight grained, and sands to a nice workable surface. Mexico/Central America. Reg. SALE:152792 1.5" x 1.5" x 3" ..................$1.99 $1.59838089 1.5" x 1.5" x 6" ................ $3.50 $2.80838090 1.5" x 1.5" x 12" ............... $5.50 $4.4006A36 2" x 2" x 12" ..................... $9.50 $7.6007A12 2" x 6" x 6" ..................... $19.99 $15.99838499 3" x 3" x 12" ................... $28.99 $23.19

$1999CuttingBoardKitComplete a custom exotic hardwood cutting board approximately 113/4" x 12" x 11/2". This fantastic assortment will ensure no two cutting boards are the same. Surfaced and ready for glue-up.152835•reg. $24.99

Save$5

New Products

Helping You Make Wood Work® 2G

In the Workshop with Charles NeilCases & Bases DVDIn this DVD series, Charles cov-ers all the different techniques he’s used to build various styles of cases, including kitchen cabinetry. From dealing with expansion and contraction, to building super strong cases, attaching cross-grain moldings, or showing super easy ways of making drawer guides and internal construction there is something here for all. Includes installation of feet and bases, shaping the ever elusive bottom cases of the bombe, installing crowns and many other techniques for the building and constructing of cases in a most sim-plistic manner. Over 9 hours of excellent instruction.151208 .......................................................$89.95

MILESCRAFTTurnLock3-in-1RouterGuideKitThree router jigs in one kit! Includes a circle compass, edge fence and offset base. 20" aluminum beam and clear router holder cuts circles and arcs from 10" to 51" in diameter. Sturdy metal edge guide easily adjusts for cuts up to 31" from edge. Clear 13" offset base with oversized handle for stability during edge routing. Includes TurnLock technology 7" universal router baseplate to fit most fixed base and plunge routers including large 3HP models.152668 .......................................................$39.99

Children’sAdirondackChairPlans&TemplatesMaking a Child’s Adirondack chair has never been easier! This kit has the plans and the templates in one package. Trace out the pieces using the templates and rough-cut them. Then, using the templates and a router with a flush-trim bit, trim the pieces to the final dimensions. Assemble and finish your chair according to the plans. This favorite project among many wood-workers is now one of the simplest. Materials and toys not included.848908 .......................................................$24.99153018 hardware kit ...................................$9.99

Timborana(Pseusopiptadenia psilostachya) Timborana has interlocking grains, brilliant burnt orange and deepening reds with a golden glow beneath. Glues and works well. Very popular for flooring and tool handles, it is also excellent for turning wood. Central America and Brazil.152831 3/4" x 3/4" x 5", 5-pc. ........................$9.99152828 11/2" x 1 1/2" x 12" ...........................$8.99152827 2" x 2" x 12" ..................................$10.99152829 3" x 6" x 6" ...................................$24.99152830 3" x 8" x 8" ................................... $34.99

TasmanianBlackwood(Acacia melanoxylon) Tasmanian Blackwood is also known as Australian Blackwood, Sally Wattle, Lightwood and Mudgerabah. Blackwood timber color ranges from a very pale honey color to a dark chocolate with steaks of red. It is very similar in its properties, color and figure to Hawaiian Koa. Very popular with luthiers, it is an excellent wood for turning, instruments and furniture. Tasmania.152833 2" x 2" x 12" ....................................$8.99152834 2" x 4" x 4" ......................................$8.99152832 3" x 3" x 12" ..................................$19.99

StripedEbony(Diospyrus sp.) The heartwood of Striped Ebony can have lines that swirl somewhat or are nearly straight—no particular pattern—which makes Striped Ebony pieces so unique. This is a very dense, hard wood that is very fine textured. It takes glue well and polishes to an excellent glass-like finish. Indonesia.152889 1/8" x 3" x 24" ................................$29.99152888 1/4" x 3" x 24" ................................$30.99152886 3/8" x 3" x 24" ............................... $31.99152887 1/2" x 3" x 24" ............................... $34.99152885 3/4" x 3" x 24" ................................$39.99

Snakewood(Piratinera guianensis) Snakewood can be challeng-ing to work, but it turns exceptionally well. When polished, it is one of the most beautiful species of hardwood. The heartwood is a dark red or reddish brown with conspicuous, irregular black speckles or stripes resembling skins of certain snakes. Grain is typically straight. South America.123669 3/4" x 3/4" x 5" (shown) ................. $11.99123668 1" x 1" x 12" ...................................$29.99152891 1" x 11/2" x 5".................................$29.99

GreatBookOfWoodworkingProjectsFrom kitchen improve-ments and storage solu-tions to classic furniture in the Craftsman and Adiron-dack styles, the experts at American Woodworker have provided plans and instructions for building 50 great looking projects that will improve every space in your home. With a variety of styles covering every skill level, there is sure to be something for everyone in this exciting project book. The step-by-step, illustrated instructions, along with workshop tips and shop-tested expert advice will help you grow your woodworking skills in the process. 255 pages, softcover.847012 .......................................................$24.95

MachineAndHandJoineryEven after several thousand years, dovetails are still being used today to fasten objects of wood. In these articles collected by the editors of Fine Woodworking magazine, you’ll learn how to use your hand and power tools to make tight joints that will help your furniture last for generations. 160 pages, soft cover.835614 ..................... $17.95

$1999120-PieceDiamondTipCarvingBurrSet120-Piece Set Offers 30 Profiles In Four Grits, 150, 240, 400, And 600149386 • reg. $29.99

Save$10


New Products

2H

WoodRiver®MagneticRouterBitHoldersMagnets offer the option to store bits horizontally so your bit storage consumes less floor space utilizing a smaller foot-print. Molded resin offers superior rust protection to simple holes in wood or even metal holders. Installation is as easy as drilling a 3/4" hole for hardwoods and plywood while drilling a 19mm hole in softer materials. Six holders per package. 4+ 151042 1/4" mag. bit holders .....$7.99 .....$5.99151043 1/2" mag. bit holders ....$7.99 .....$5.99125931 3/4" forstner bit ............. $6.5015128019mm forstner bit ........$6.99

WOODPECKERS®

SideWinderRouterLiftWoodpeckers SideWinder Router Lifts combine instant elevation change with remotely operated, micro-adjustments to dramatically reduce the time it takes to change a router bit while providing a tool-free method of bit height adjustment. With a simple twist of the spring-assisted lift wrench, the router motor is free to be moved to any vertical location without requiring any other action. Fine, precise bit height changes are equally as effortless by “cranking” the handle located where you want it most. Both router lifts are CNC milled to exact tolerances for perfect fit in router tables with a 91/4" x 113/4" opening. Large ground and polished steel posts and precision machined guide bearings comprise each carriage,

A

whether sized as a “420” for the industry standard PC 7518 or “350” for common 31/2" diameter motors. Remote actuated crank precisely adjusts bit height through tough steel flex shaft and a mounting plate that can be adapted to most steel angle stands and enclosed cabinets. 39/16" bit opening accepts molded insert rings with 25/8", 1" and 13/16" guide bushing openings included. Each SideWinder router lift clamps under the router plate to secure the lift in place without screws from above. Engraved scales to simplify fence positioning with eight threaded setscrews for leveling. Includes spring-assisted lift wrench, threaded starting pin, spanner wrench and detailed instructions.151241 (A) 350 SideWinder ................... $259.99151242 (B) 420 SideWinder ..................$359.99

B

PORTER-CABLE1.25HPCompactRouterKitModel450PK• Ergonomically designed to allow for comfortable and assured, single handed control• 1.25HP motor delivers the power to meet the toughest applications• Soft-starting motor features full-time electronic feedback • Plunge base offers four position turret style dept stop and easy access plunge lock • Plunge base provides a full 2" plunge distance • Fixed base features adjustment ring for controlled bit depth changes to within 1/64"• Depth ring and clamping mechanism • Large, low-pressure spindle lock button Includes: Motor, Standard Base, Plunge Base, Wrench, 3-Year Warranty & Instruction Manual. 847926 .................................................... $199.99

PORTER-CABLE 1.25HPCompactRouterModel450• Ergonomically designed to allow for comfortable and assured, single handed control• 1.25HP motor delivers the power to meet the toughest applications• Soft-starting motor features full-time electronic feedback • Adjustment ring enables controlled bit depth changes to within 1/64"• Depth ring and clamping mechanism• Large, low-pressure spindle lock Includes: Motor, Standard Base, Wrench, 3-Year Warranty & Instruction Manual. 847191 ....................................................$129.99

$22999KREGPrecisionBenchtopRouterTable• 16" x 24", 1" Thick MDF Core Top•CNC Machined 91/4" x 113/4" Opening• Includes Phenolic, 2" Hole Insert, Combination Miter & Accessory T-Track148070 • reg. $229.99*FREE 149970 When You Purchase 148070.

GetAFREESwitch*!$3499Value!

MultipurposePrecisionRouterTableSwitch

149970

$4999WoodRiver®10-PieceRouterBitSetsIncludes: 1/4", 3/8" And 1/2" Diameter Straight Bits; 1/2" X 14° Dovetail Bit; 1/2" Diameter Core Box Bit; 1/2" Diameter V-Groove Bit; 1/2" Diameter Flush-Trim Bit; 1/4" Radius Cove Bit; 1/4" Radius Round-Over Bit And 5/32" Radius Roman Ogee Bit.150704 1/4" SH • reg. $83.99150705 1/2" SH • reg. $83.99

Save$34

Save 25%Whiteside3-Wing1/8"SlottingCutter•Superior To Straight Router Bits For Slotting The Edges Of Boards• Carbide Tips Cut Spline Joints In Solid Wood, Plywood, And Particleboard•A Kerf 1/2" Deep Is Cut Quickly And Cleanly•Requires Arbor To Operate Reg. SALE:24D64 (A) 3-Wing 1/8" Slotting Cutter ................ .......................................$19.99 ...$14.9924D69 (B) 1/2" SH x 23/8" Arbor w/Bearing ........ .........................................$9.99 ......$7.49

AB

WhitesideBlanketChestBeadingBitThis bit was designed by Whiteside Ma-chine Company to aide in the concept and reproduction of a Colonial 1670 Blanket Chest, brought back to life by Tommy MacDonald on the TV Series Rough Cut – Woodworking with Tommy Mac. The original blanket chest is in the Wadsworth Atheneum in Hartford, Connecticut. 152681 ...................................................... $34.99

Save$18

$2999WoodRiver® RoundOverRouterBit,1/2"SH3/4"R• Anti-KickBack Design, Precision Machined• Produces A Rounded Corner With A Decorative Fillet151189 • reg. $47.99

New Products

Helping You Make Wood Work® 2I


New Products

2J

Power Tools

Helping You Make Wood Work® 3

FESTOOL Routers • Superior Dust Extraction• Powerful• Multi-Material Speed Control• Tool-less Inserts

Model MFK 700 EQ574368 ...............................$535.00

Model MFK 700 EQ OF 1010 EQ OF 1400 EQ 2200 EBSKU 574368 574339 574342 574277 Router Type Trim* Plunge Plunge Plunge Watts/Amps 720W/6amps 1010W/8.5amps 1400W/11.7amps 2200W/18ampsRPM 10,000-26,000rpm 10,000-23,000rpm 10,000-22,500rpm 10,000-22,500rpmDepth adjustment Micro Adjust- 1/256" 21/8" 23/4" 35/32"Collet Range 1/4" and 8mm 1/4" and 8mm 1/4 " ,1/2" and 8mm 1/4 ", 1/2 " and 8mmWeight 4.2lbs 5.94lbs 9.9lbs 17.2lbs Chip Catcher N/A Yes Yes YesDust Extraction Hood Yes Yes Yes YesGuide Stop N/A Yes No NoU.S. Guide Bush. Adapt. N/A Yes Yes YesColumn stroke 9/16" N/A N/A N/AMax bit diameter 1" (26mm) N/A N/A N/ASystainer SYS 2 T-LOC SYS 3 T-LOC SYS 4 T-LOC SYS 5 *Includes Vertical Base, 1.5° Horizontal Base & Feeler Bearing Set

VS Plunge Router, Model OF 1010 EQ574339 ...............................$385.00489427 edge guide .............. $36.00

Model OF 1400 EQ574342 ...............................$485.00492601 guide rail att............ $72.00

Model OF 2200 EB574277 ...............................$825.00

A

B

FESTOOLPendulum Jigsaws• Powerful 720 watt Motor• Dual Port Dust Extraction• Multi-Material Speed Control• Triple Blade Guidance System• Bevels 45° to either side• Full 1" stroke – 1,000-2,900spm• 4-stage stroke adjustment• Non-marring sub-baseIncludes: Chip guard, Splinterguard and SYS 1 T-LOC Systainer. Available in two handle configurations.

Barrel Grip Jigsaw, model Trion PS 300 EQ.561443 (A) .......................... $310.00

D-Handle Jigsaw, model PSB 300 EQ.561455 (B) .......................... $310.00

Accessories:53/4" Jigsaw Blade. 43/4" max. cut thickness, for hard and softwood, and veneered plywood. 5-pack.490179 ................................. $26.00

41/8" Jigsaw Blade. 33/8" max. cut thickness, for hard and softwood, and chipboard. 5-pack.486552 .................................$20.00

3" Jigsaw Blade. 21/8" max. cut thick-ness, for hard and softwood, and chipboard. 5-pack.486549 .................................$13.00

2" Jigsaw Blade. 13/16" max. cut thickness, for hard and softwood, chipboard and soft plastics. 5-pack.486564 ................................... $8.00490120 splinter guard (5) ..... $8.00

CT Hose Garage• Store & transport hose• Attaches without tools494388 fits CT 22, CT 33 ...$50.00

FESTOOL Dust Extractors Accessories

Compact Cleaning Set. 10 pieces in a T-LOC Systainer. Includes extension tubes and bent pipe; floor, upholstery and crevice nozzles.497697 ..................................$77.00

FESTOOL Rotex Dual ModeSanders• Dual-mode random orbital action• Turbo Dust Extraction• Pad brake • Variable Speed• StickFix Hook & Loop Pad SystemIncludes: Abrasive sample pack, edge protector, removable dust channel & T-LOC Systainer.

Model RO 150 FEQ6" Dual Mode Sander with with NEW Multi - Jetstream design has a 3/16" stroke, 6 Amp, 320-660 RPM rotary motion speed, 3,300-6,800 OPM eccentric motion speed, 5 lbs.571810 (A) ......................... $525.00

Model RO 125, 5" Dual Mode Sander has a 9/64" stroke, 4.2 Amps, 300-600 rpm rotary motion speed, 3,000-6,000 OPM eccentric motion speed, 4.4 lbs.571782 (B) ..........................$425.00

FESTOOL Hook And Loop Sandpaper 496614 6" 50 grit (50) ......$29.00496615 6" 80 grit (50) .....$29.00496616 6" 100 grit (50) ...$29.00496617 6" 120 grit (50) ...$29.00496618 6" 150 grit (50) ...$29.00496619 6" 180 grit (50) ...$29.00496592 6" 220 grit (100) $41.00496594 6" 320 grit (100) $41.00484131 6" sheepskin .......$16.00493115 5" 80 grit (50) ......$23.00493116 5" 100 grit (50) ...$23.00493117 5" 120 grit (50) ...$23.00493118 5" 150 grit (50) ...$23.00493119 5" 180 grit (50) ...$23.00492950 5" 220 grit (100) $37.50492952 5" 400 grit (100) $37.50

B

CFESTOOLRandom Orbit Sanders• Turbo Dust Extraction• Pad brake • Variable Speed• StickFix Hook & Loop Pad SystemIncludes: Abrasive sample pack*, & T-LOC Systainer. (*excludes DTS 400 EQ).

Model ETS 150/3 EQ, 6" Sander with NEW Multi-Jetstream design has a short 1/8" stroke, 2.5 Amp, 6,000 to 10,500 OPM, 4 lbs. with a T-LOC Systainer storage container.571786 (A) ......................... $295.00

Model ETS 125EQ, 5" Sander has a 5/64" stroke, 2 Amp, 6,000 to 14,000 OPM, 2.4 lbs., with a T-LOC Systainer storage container.571817 (B) .......................... $175.00

Model DTS 400 EQ. 1.67 Amps, 6,000-14,000 OPM, 2.4 lbs. Triangular pad is 4" x 6". Includes: hook & loop pad; 1 abrasive sheet; filter cartridge with a T-LOC Systainer storage container.567871 (C) .......................... $215.00

A

FESTOOLDust Extractors• Automatic Tool Start• Oversized wheels CT Mini CT MIDI CTL 26 E CTL 36 E 583360 583376 583492* 583493*Filters 1 micron 1 micron HEPA HEPAAntistatic Suction Hose 11/16" x 11.5' 11/16" x 11.5' 11/16" x 11.5' 11/16" x11.5' (27mm x 3.5 m) (27mm x 3.5 m) (27mm x 3.5 m) (27mm x 3.5 m)Container Capacity 2.6 gal. (10 L) 3.9 gal. (15 L) 6.9 gal. (26 L) 9.5 gal. (36 L)Filter Bag Capacity 2 gal. (7.5 L) 3.3 gal. (12.5 L) 6.3 gal. (24 L) 8.9gal (34 L)Depth x Width x Height 17.5" x 13.5" x 16.5" 17.5" x 13.5" x 18.5" 24.8" x 14.4" x 21.25" 24.8" x 14.4" x 23.4"Weight 21 lbs. 21.4 lbs. 28.9 lbs. 29.8 lbsNoise (low setting) 62 dB 62 dB 62 dB 62 dB (max. setting) 72 dB 72 dB 72 dB 72 dBMax. Suction 99 CFM 99 CFM 137 CFM 137 CFMPower Consumption 400-1200 watts / 400-1200 watts/ 350-1200 watts/ 350-1200 watts/ 3.3-10 amps 120 V 3.3-10 amps 120 V 2.9-10 amps 120 V 2.9-10 amps 120 VIntegrated SYS-dock Yes Yes Yes YesAdjustable Suction Yes Yes Yes Yes Locking Brake Yes Yes Yes YesIntegrated Hose Garage Yes Yes Yes YesHEPA Filtration No No Yes Yes

583360 CT Mini ............................................. $385.00583376 CT Midi ............................................. $435.00583492 CTL 26 E ............................... NEW! $550.00583493 CTL 36 E ............................... NEW! $600.00456772 CT Mini filter bags (5) ........................$22.00

494105 CT Midi filter bags (5) ........................$28.00452970 CT 22 filter bags (5) ...........................$35.00452971 CT 33 filter bags (5) ...........................$35.50496187 CT 26 filter bags (5) ...........................$31.00496186 CT 36 filter bags (5) ...........................$35.50

ONEIDA Ultimate Dust Deputy IIC o m b i n e i t w i t h Fe s t o o l C T D u s t Extraction System to create the ultimate three stage vacuum system. Cyclonic action sepa-rates out 99% of the dust into the 9-gallon collection box and works with any shop vacuum. Kit Includes: industrial static dissipative 9-gallon. container, dust bagger, plastic bag hold-down system, cyclone separator, 6' static dissipat-ing hose with static dissipating cuffs, hose fittings and instruction manual. 151175 ...............................$249.99


Power Tools

FESTOOLPlunge-Cut SawsGet the accuracy of a panel saw, table saw, sliding miter saw or radial-arm saw in a compact package that delivers precise cuts in any environment.Both models include: Splinterguard and Limit stop.Model TS 55 EQ 561432 .................................................. $525.00496305 standard blade, 12T, ATB ............$40.00495372 panther blade, 14T, ATB ............ $45.00495377 lam./veneer blade, 48T, ATB......$65.00496304 universal blade, 28T, ATB ........... $47.00496309 lam. floor/Corian®� blade, 48T ....$75.00491473 splinter guards (5) ...................... $18.00

Model TS 75 EQ561438 ...................................................$655.00495380 universal blade, 36T, ATB ...........$75.00495381 fine-tooth blade, 52T, ATB........ $106.00495382 laminate blade, 60T, TC ........... $115.00495378 panther blade, 16T, ATB .............$65.00

Specifications: TS 55 EQ TS 75 EQWatts/Amps: 1,200W/10A 1,600W/13ARPM: 2,000-5,200 1,350-3,550Dust Extraction: YES YESCut Depth: 115/16" 23/4"Cut Depth at 45°: 17/16" 21/8”Cut Depth w/Rail: 21/8" 215/16"Weight: 9.92lbs 13.6lbsBlade Diameter: 61/4" 81/4"Blade Arbor: .787 (20mm) 1.101 (30mm)Bevel Cuts: 0°- 45° 0°- 45°Guide Rail: 55" 75"Carbide Blade: 48 T 36TSystainer: SYS 4 T-LOC SYS 5 T-LOC

4

FESTOOL MFT/3 Multifunction TableThe “New” and improved MFT is taller and is 15% lighter but still provides a strong, sturdy, portable worktable. Table is 281/4" x 433/8", 351/2" high, folds to 73/32", maxi-mum work thickness 31/ 16", maximum working width 279/16", working height 357/16", and weighs 62 lbs. Includes (2) guide rail supports, angle unit, fence rail, adjustable stop and guide rail FS 1080. 495462 ................................................... $595.00

MFT/3 Kapex Multifunction Table Designed specifically for use with the Kapex sliding compound miter saw. Table is 227/8" x 347/32", 311/8" high, 42 lbs., and folds to just 8" thick. 495565 .....................................................$390.00

Accessories:Quick Clamp for use with MFT or guide rails.491594 (not shown) ..................................$39.00

Clamping Elements, for clamping on MFT, qty. 2.488030 (A) .................................................$98.00

AFESTOOL EHL 65Planer• Powerful 720-watt motor• Spiral cutterhead• Designed for one-handed operations• Angled groove for chamfering

Includes: Parallel Stop, Solid Carbide Blade, SYS 2 Systainer. Specifications: Cutting Depth:0 - 5/32" (0 - 4 mm), Rabbeting Depth: 0 - 29/32" (0 - 23 mm), Noise Level at Idle: 76 dB.

574543 ................................................... $410.00488503 repl. blade ...................................$25.00488543 rabbet depth stop ..................... $12.00

FESTOOL Kapex Variable-Speed Sliding Compound Miter SawModel KS 120 EBThe KS 120 is the first 10" miter saw with variable speed, matching requirements of the material for prefect cuts, every time.• 12" Miter saw Cutting capacity • 91% Dust Collection efficiency• Dual laser marking system• Miter Fast angle transfer device

Specifications:Power Consumption: 13 Amps Speed: 1,400-3,400 RPM Cutting depth: 90°/90°- 12" x 315/32" Left/right: 45°/90°- 815/32" x 315/32"Left: 45°/ 45°- 815/32" x 21/8" Right: 45°/45° - 815/32" x 13/8" Special cutting depth: 423/32" x 3/4"Crown nested capacity: 65/8", Max Bevel: 47°/47°Miter range: 50°/60° Dust port: 27/36 mm Dimensions: 28" x 193/4" x 181/2"Weight: 47 lbs.Includes: angle transfer device, hold-down clamp, wrench and high-quality 60-tooth carbide blade.561287 .................................................$1,300.00

Package Savings!Visit www.woodcraft.com

For Complete Details and Special PricingOn These & More Great Packages

+

Domino Cross Stop SetFor hole spacings between 4" (100mm) and 8" (205mm).493488 ............. $65.00

Domino Trim StopFor repeatable mortising of spindles, narrow rails, or other materials from 22mm (7/8") to 70mm (23/4") wide.493487 ...............$55.00

FESTOOL Domino Joiner SetBest Value – Save $50 when you combine the Domino Joiner with the Cross Stop and Trim Stop.574432 DF 500 Q Set ............................ $850.00

Replacement Domino Cutters493493 D10 (10mm) $36.00493492 D8 (8mm) ... $35.00493491 D6 (6mm) ...$34.00493490 D5 (5mm) ...$33.00495663 D4 (4mm) ...$32.00

Domino Tenons Size Pieces495661 4mm x 20mm ............... 450....... $17.50493296 5mm x 30mm ............ 1,800.......$75.00493297 6mm x 40mm ............ 1,140.......$75.00493298 8mm x 40mm ................780.......$75.00493299 8mm x 50mm ............... 600.......$75.00493300 10mm x 50mm ..............510.......$75.00

FESTOOL Domino Joiner System DF500QThe Domino Joiner cuts “rectangular”, domino shaped slots to accept the pre-fabricated, solid Beech Domino tenons. • Precise positioning and accurate mortising • Powerful 420 watt motor – 24,300 RPM• Fully adjustable large pivoting fence system• Dust extraction • 5 different mortising depths• For material thickness of 3/16" to 13/16"

System includes DF 500 Q Domino, D5 Cutter, Support Bracket, Wrench and custom fitted T-LOC Systainer 2. Dominoes sold separately.574332 DFQ 500 Q system...................$800.00

Domino And Dust Extractor Packages26574307 Domino & CT 26 ................$1,295.0036574307 Domino & CT 36 ................$1,340.0026574308 Domino Q Set & CT 26 ......$1,345.0036574308 Domino Q Set & CT 36......$1,390.00

Domino Cutter And Tenon Assortment T-LOC Systainer Systainer includes: D10, D8, D6, D5 & D4 Cutters; 300 - 5mm x 30mm, 190 - 6mm x 40mm, 130 - 8mm x 50mm, 85 – 10mm x 50mm, and 440 - 4 x 20mm dominoes.497704 ...........................................NEW! $285.00

D5 D6 D8 D10

FESTOOLFS GuideSystemFor use with any Festool saw or router.491498 55" guide rail ............................... $98.00491937 106" guide rail ........................... $270.00495207 replac. 55" splinter guard ............$16.00495209 replac. 197" splinter guard ........ $32.00482107 1 guide rail connector (2 rcmnd.) $15.00489570 clamps (2), 411/16" capacity ........ $36.00489022 rail-end hose/cable deflector ......$16.00491582 limit stop .......................................$10.00

Guide Rail Accessory Kit. Includes: angle unit; limit stop; 55" splinter guard; deflector; 2 guide rail con-nectors; 2 clamps; Systainer 1 storage container.497657 ................................................... $184.00

+

Power Tools


Precision E-Cut Blades830154 13/8" 3-pk. ............ $48.80830348 21/2" 3-pk. .............$52.60

Universal E-Cut Blades829454 11/8" ....................... $23.70830093 11/8" 3-pk. ............ $47.40

Segmented Blades814637 31/8"......................$20.20

HSS Segmented Blades814418 31/8" .....................$33.10824237 recessed blade ...$63.9925B12 flex. scraper (2) ...$28.50

Sandpaper, Hook & Loop832275 60 grit 5-pack .......$5.99832276 80 grit 5-pack .......$5.99832277 120 grit 5-pack ..... $5.99832278 180 grit 5-pack .....$5.99814413 50-pc. pack .........$24.9909W10 triangle pad (2) ...$16.99150652 sand pad kit ........$34.99

Sandpaper, Adhesive Back146392 80 grit 5-pack ........$4.99146393 120 grit 5-pack ......$4.99146394 220 grit 5-pack ......$4.99

Model number asterisk(s) means item shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=$125. See Ordering Info page for details

FESTOOLSystainer SYS-2 AtticOrganize, store and protect your valuable tools with the rugged SYS-2 Attic from Festool. The full size T-LOC Systainer 2 features a convenient, built in segmented storage compart-ment. Ideal for bits, drivers or any other spare parts that need to be organized.497852 ................................ $72.00

FESTOOLHSK-SET Sanding Block SetComfort and control are built in to these sanding blocks from Festool. The rounded blocks are provided in a hard and soft pad, while the rectan-gular block is a hard pad. The round blocks use any StickFix™ 150mm sanding discs and the rectangular block uses any StickFix™ 80x133mm sheets. Set includes a free Mini Systainer.M0107 ................................ $75.00

FESTOOL Parallel Guide Extension SystemThe new Festool parallel guide set, allows you to make accurate rips and crosscuts ranging from 1/16" to 251/2" with your Festool guide rail and TS plunge cut saw. The parallel guides have movable stops that reference the guide rail parallel to edge of your mate-rial for fast, accurate and repeatable cuts. The guides can be purchased separately or as a set. The Parallel Guide cuts from 51/2" to 251/2" while the Parallel Guide Extension cuts from 1/16" to 75/8". 495717 parallel guide .......$240.00495718 parallel guide extension .... ............................ $135.00P00108 parallel guide set $325.00

Packages include: START SELECT TOPQuick-in Tool mounting* No Yes Yes(1) Sanding Pad Yes Yes Yes(20) Sanding sheets** Yes Yes Yes(1) Universal E-Cut Saw Blade (13/4") Yes Yes Yes(1) Segmented HSS Saw Blade No Yes Yes(1) Carbide-tipped segment saw blade No Yes Yes(1) Ridged scraper Yes Yes Yes(1) Wide Standard E-Cut (21/2") No Yes Yes(1) Sanding Pad Kit No No Yes(1) M-Cut Saw Blade (13/4") No No Yes(1) Profile sanding Set No No Yes(1) Dust extraction Assembly No No Yes(1) Perforated Sanding pad No No Yes(20) Perforated Sanding sheets** No No Yes(1) Carbide rasp (triangular) No Yes Yes(1) Tool Case No Yes YesAccessory Value if purchased separately $70.78 $343.06 $506.52* START includes (1) wrench and mounting bolts.** 5 sheets each of 60, 80, 120, 180 grit.

A

Turbo I Turbo II Turbo IIIModel 9-20-24 9-20-25 9-20-26Auto start Yes Yes YesVar. suction Control Yes Yes YesVoltage 120 V 120 V 120 VWatts 1000 W 1050 W 1200 WStatic water lift 90 in. 90 in. 99 in.Air flow 116 cfm 116 cfm 126 cfmWeight 17 lb 28 lb 36 lbPower cord 16 ft. 16 ft. 16 ft.Hose length 16 ft. 16 ft. 10 ft.Hose diameter 11/4 in. 11/4 in. 21/4 in.Capacity dry 6 gal. 9 gal. 15 gal.Capacity wet 5.3 gal. 6.8 gal. 12 gal.Noise at 3 ft. 62 dB(A) 57.8 dB(A) 57.8 dB(A)

FEIN Dust ExtractorsDesigned for heavy, continu-ous, industrial use wet or dry - the rugged anti-tipping design features a powerful two-stage motor that offers bypass cooling; ensuring a long motor life. Vacuum performance measured at 90 to 99 inches of water lift means Fein dust extractors produce far greater suc-tion than the competition. All three models come with electronic variable suction control with LED indicator allowing for maximum performance, auto-start function, and integrated drain plug. Accessory filters are avail-able that capture particles down to .3 micron (HEPA).

Turbo IModel 9-20-24 is quiet, powerful and portable. Includes 5-micron cloth bag, round upholstery brush, crevice tool, rubber adaptor for power tools and 11/4" x 16' crush-proof hose. 149513 (A) .......................... $315.00

Turbo II Model 9-20-25 is Fein’s most popular model. Includes 5-micron cloth bag, and 11/4" x 16' crush proof hose. 149514 (B) .......................... $412.00

Turbo IIIModel 9-20-26 has a hefty 12 gal. capacity and doubles as a dust col-lector. Includes 5-micron cloth bag, step adapter (21/4" to 11/4") and 21/4" x 10' crush-proof hose. 149515 (C) .........................$469.00

1 Micron Filter Kit Fits Turbo I, II & III.129891 ................................$45.99814548 replacement filter ...$44.99

B C

Dust Bags 830272 Turbo I, (3) ............. $14.99830244 Turbo II, (3) ............ $16.99830349 Turbo III, (3) ............$17.99 Turbo I & II Accessory Kit includes a handle, two 19" stainless steel exten-sion tubes, upholstery nozzle, crevice tool, brush, wet material filter, and dry and wet floor pickups.128423 (D) ............................$129.99

Turbo III Accessory Kit includes two extension tubes, handle, crevice nozzle, brush, upholstery nozzle and floor frame with brush.820808 (E) not shown ......$134.99

Replacement Hose818147 11/4" x 16' .............. $71.99815898 step adapter ........... $5.99

FEIN MultiMaster• High Performance 250 Watt Motor• Electronic Speed Control• Oscillates 11,000-20,000 OPM• Designed for Continuous use• 8-Point Tool Mount For Outstanding Torque Transfer

MultiMaster TOP PLUS Package151048 (shown)……. .......... $399.99

MultiMaster SELECT PLUS Package151049 ……………………… $329.99

MultiMaster START Package 837966 ……………………… $209.99

MultiMaster Accessories 147964 wood kit ............ $134.99147963 floor kit .............. $134.99836850 tileworker kit .... $134.99

E-Cut Blades 148527 3-pk. ast. ............... $47.40815350 13/8" prec. .............$24.40818803 13/8" std. ...............$19.60830271 13/8" 3-pk. . ...........$39.20815351 21/2" prec. .............$26.30818804 21/2" std. ............... $21.20830413 21/2" 3-pk. ............$42.40


Power Tools

6

JET VS Pro Wood LatheModel JWL-1442VS**• Heavy-duty cast-iron lathe bed • Headstock swivels 360° with positive stops at 45° and 90° • Motor: 1HP, 1PH, 115/230V, prewired 115V, 7.4/3.7A• 8 speeds- 450-3,000 RPM • Distance Between Centers: 42" Swing over Bed: 14" • Headstock/Tailstock Taper: #2MT • Spindle Nose: 1" x 8TPIShipping wgt. 448 lbs., regular shipping rate plus $75.822430 D/S ...................$1,349.99

JET Air Filtration SystemModel AFS-1000B • 3-Stage Filtering - 1 micron• Remote Control & Timer• 3 speeds – 550,702 & 1,044 CFM• Disposable Outer Filter – Washable• Filters air 12 times an hour for a 20' x 20' x 8' shop815488 ............................ $339.99818941 electrostatic filter $54.99818943 charcoal filter ........$57.99

JET Benchtop MortiserModel 708580 • Powerful 1/2HP TEFC Motor (1,725 RPM )• Heavy duty cast iron bed• Three jaw drill chuck • Rack and pinion head (raising and lowering)• Two hinged side doors to allow for complete drill chuck access• 1/2" max. mortise chisel capacity• 43/4" head strokeIncludes FREE 1/4", 3/8" and 1/2" chisel and bit set814541 D/S ........................ $319.99WoodRiver® Chisel & Bit Sets143996 1/4" ........................$13.50143997 5/16" .......................$13.50143998 3/8" ........................$13.99143999 1/2" ......................... $17.99144010 4-piece box set .....$41.99

JET 22-44 PlusDrum SanderModel 649005K**• 13/4HP, 115V, TEFC motor• Exclusive SandSmart controlled conveyer (0 to 10 FPM)• Aluminum sanding drum (1,700 RPM )• Cast iron hand wheel with 1/16" per turn height adjustment• Maximum sanding width of 44" (with two passes) • Maximum sanding thickness of 4"• Built in dust port• Includes stand, shelf, (1) 80 grit abrasive strip and (1) 100 grit abrasive conveyor belt Manufacturer recommends 400 to 600 CFM dust collection on a 20 Amp circuit. Shipping weight 350 lbs., regular shipping rate plus $75.825635 D/S .................. $1,699.99

22-44 Plus Infeed/Outfeed Tables. Solid steel tables add extra support for longer work pieces.825985 ............................$119.99

Ready To Wrap 22-44 Plus Sandpaper. Pre-cut, ready to use. Each pack contains three strips. 812800 36 grit ...................... $45.99812801 60 grit ...................... $45.99812802 80 grit ...................... $45.99812803 100 grit .................... $45.99812804 120 grit .................... $45.99812805 150 grit .................... $45.99812806 180 grit .................... $45.99812807 220 grit ................... $45.99

JET Drum Sander Model 16-32 Plus*• 1.5 HP Motor- 115V• Variable speed (0-10' per minute) feed rate• Top mounted handle height adjustment• Handles stock from 3" down to less than 1/32"• Maximum sanding width of 32" (with two passes)• Built in dust port• Includes: Stand, Storage shelf, (1) 80 grit abrasive stripShipping wgt. 195 lbs., regular ship-ping rate plus $55. 811571 D/S ........................$999.99813280 casters ................$144.99

Model 16-32 Infeed/Outfeed Tables. Solid steel tables make it easier to sand pieces as short as 21/4" or veneers as thin as 1/64".813013 ............................. $124.99147116 repl. feed belt ...........$51.50 Ready To Wrap Performax Sandpaper. Pre-cut, ready to use packs of four strips. 812791 36 grit ...................$45.99812792 60 grit ....................$45.99812793 80 grit ...................$45.99812794 100 grit ..................$45.99812795 120 grit ..................$45.99812796 150 grit ..................$45.99812797 180 grit .................. $45.99812798 220 grit .................. $45.99

JET 14" BandsawModel 708115K*• Micro adjusting upper blade guide• “V” groove blade guide bar for consistent positive alignment• Graphite impregnated Jet Blocks® for cool, true running blades• Extra large 15" x 15" cast iron table• Table height from floor is 431/2"• Totally enclosed fan cooled 1HP, 1PH, 115/230V motor• Built in dust chute• Machine is 68"H x 26"W x 19"D• Specifications: 6" cutting capacity height, 131/2" cutting capacity width, L/R table tilt 45°/10°, 1/8" minimum saw blade width, 3/4" maximum saw blade width, 931/2" saw blade length Shipping weight: 257 lbs. regular ship-ping rate plus $55. 961123 D/S ........................$679.99 817372 rip fence ...............$119.99961137 6" riser block .........$94.99 85T70 miter gauge ...........$64.99

Model number asterisk(s) means item shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=$125. See Ordering Info page for details.

JET Mini Lathe With Indexing HeadModel 708375• 1/2HP, 1PH, 115V Motor• Six speeds: 500; 1,200; 1,450; 2,130; 2,400 and 3,950 RPM• 10" swing over the bed• 14" Spindle capacity - which can be increased by adding a 20" bed extension• 1" x 8 TPI Spindle• #2 Morse Taper on head and tail stock• Overall dimensions: 245/8"D x 71/4"W x 14"HIncludes: 6" tool rest, live center, 3" face plate, spur center, tooling knock-out, and safety goggles.147822 .............................. $399.99

Variable Speed Mini Lathe With Indexing HeadModel 708375VS.This lathe has the same features as 708375 with variable speed rang-ing from 500-3,900 RPM. Shipping weight 78 lbs.147823 ................................$479.99818913 floor stand .............$189.99819933 bed extension ......... $94.99

The following tools and accessories are also available at Woodcraft. For more information, call your local Woodcraft Store, check out woodcraft.com, or call us at 800-225-1153.

824779 DC650CK 1HP dust collector plus D/S ........................$499.99816763 708404 benchtop spindle sander plus D/S .................$439.99835634 7084080K 10" ProShop tablesaw w/30" fence D/S ...$899.99841365** 17" drill press, 250 lbs. D/S .................................NEW! $539.99

JET Benchtop Sander Model 10-20 Plus • Powerful 1HP TEFC motor • Variable feed rate of 0-12 ft. /min. • Drum speed 1,700 RPM • Maximum sanding width of 20" (two passes) • Minimum material length of 21/4"• Handles stock from 3" down to less than 1/32"• 4" dust port• Includes: (1) 80 grit abrasive strip, (1) 100 grit abrasive conveyor belt 825629 D/S .....................$699.99826127 stand .................. $149.99147118 repl. feed belt ....... $26.99

Ready-To-Wrap Abrasives are available in grits of 24 to 220 to handle any task. Each grit contains six (6) strips. 826064 60 grit .................. $45.99826065 80 grit .................. $45.99826066 100 grit ................ $45.99826067 120 grit ................ $45.99826068 150 grit ................ $45.99826069 180 grit ................ $45.99826346 220 grit ................ $45.99

D/S = Item drop ships direct from manufacturer.

JET 11/2 HP Dust Collector With CanisterModel DC-1100CK* • Motor 115/230V, 11/2HP, 1PH• 2-Micron Canister• 1,100 CFM of air flow and 8.9" of static pressure• Two 4" ports or one 6" port • Overall dimensions 37" x 20" x 79" Shipping wgt. 120 lbs., regular shipping rate plus $55.821769 D/S .................... $629.99

Power Tools


POWERMATIC 14" BandsawModel 1791216K**FREE Riser Block*• 11/2 HP, 115/230V motor• Full 6" resaw capacity • 131/2" frame-to- blade clearance• 2-piece cast-iron table -15" x 15" tilting (45° right, 10°left) fixed 15" x 5" extension • 9-spoke cast-iron wheels • Carter quick tension release lever • Micro-adjustable dual bearing blade guide system • Quick-release T-square style fence system• 931/2" blade range from 1/8" to 3/4"Includes: Adjustable miter gauge, rip fence 1/4" bandsaw blade, goose-neck work light, chip blower and 4" dust port Shipping wgt. 203 lbs., regular shipping rate plus $75. 824315* D/S ..................... $999.99826688 mobile base ......... $179.99826321 riser block D/S ...... $99.99*Includes FREE 826321 Riser Block w/824315 purchase, a $99.99 Value!

Delta 17" LaserDrill Press Model 17-959L***• 3/4 HP, 120V/240V motor• 16 Speeds: 215-2,750 RPM• Dual Lasers • Task Light• Table Size: 18" x 14"• Table Tilt: L & R: 0-90°; Forward: 0-45°• Table Insert: 33/4" x 33/4"• Spindle Taper: #2 MT• Chuck Taper: Jacobs 3• Quill Stroke: 47/8"• Key Chuck Capacity: 5/8"• Dimensions: 70"H x 18"W x 28"DShipping weight 268 lbs., regular shipping rate plus $75.835031 D/S ........................$579.99

POWERMATIC PM2800 Variable Speed18" Drill Press Model 1792800**• 1 HP, 115V/230V motor• Spindle Speed: 400-3,000 RPM (digital readout)• Twin lasers • Single handle speed adjustment • Table Size: 16" X 14" Fully Extended: 16" X 26"• Table Tilt: 0 to 90 degrees • Fence Size: 117/8" X 195/8"• Footprint : 31.5"L x 23.5"W x 68"HShipping weight, 302 lbs., regular shipping rate, plus $75.835313 D/S .......................$999.99


POWERMATIC 2000 10" Table SawModel 1792000KShipping weight 740 lbs., ABSOLUTELY FREE SHIPPING!832671 D/S ................................................................................. $2,899.99

POWERMATIC 15" Planer with Byrd SHELIX® Helical CutterheadShipping wgt. 507 lbs., ABSOLUTELY FREE SHIPPING!835284 D/S ................................................................................. $2,799.99

Model number asterisk(s) means item shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=Residential Fee of $45, plus Liftgate Fee of $35 - if required.

POWERMATIC LatheModel 3520B• Motor: 2HP, 1PH/3PH, 220V, 6.2A • Variable speed and digital RPM readout (high 125-3,200; low 50- 1,200)• Spindle lock and built-in spindle indexing on the headstock • Distance Between Centers: 341/2" Swing Over Bed: 20"• Headstock/Tailstock Taper: MT-2 • Spindle Nose: 11/4" x 8TPI • Ram Travel: 41/2" • Hole Through Spindle: 9/16"• Overall Dimensions: 75"L x 27"W x 58"HIncludes: Safety shield, 3" face plate, face plate wrench, 14" tool rest, ball-bearing live center, brass tipped knockout rod, and drive center. Shipping wgt. 682 lbs., ABSOLUTELY FREE SHIPPING!831997 D/S ....................$3,899.99

830663 TP305 12" Portable Planer D/S .................................... $289.9915 amp, 120V motor; 15"H x 20�1/2"W x 23��3/4"D; 62 lbs.

825369 37-275X 6" Prof. Jointer ..................................................$649.991HP 120/240V single phase induction motor, 228 lbs.**

821867 Model 14-651 Deluxe Hollow Chisel Mortiser ................ $279.991/2 HP 120V induction motor, three-jaw chuck has a 3/8" capacity

DELTA Variable-Speed Midi Lathe Model 46-460*• Powerful 1 HP Max, 120V, 60 Hz, 1 Phase • Electronic Variable Speed • Speed: 250 - 700; 600 - 1,800 and 1,350 - 4,000 rpm• Forward and Reversing function • Large 121/2" swing capacity • Indexing pin to lock the head stock spindle in 24 different locations • All cast-iron construction • Up front belt access w/ patented belt tensioning system• Distance between Centers: 161/2"; With Extension: 42"• Drive spindle thread count: 1" - 8 RH TPI Thread• Head and tailstock taper: #2 MT Includes: 3" face plate, 6" and 10"

tool rests, spur center, ball-bearing live center, heavy-duty, steel knockout bar and wrenches 843625 D/S .....................$599.99Shipping weight 106 lbs., regular shipping rate plus $55. 843793 reversible Nova G3-D ......... chuck D/S .............$145.00843906 stand D/S .............$164.99843913 modular bed extension ...... D/S ........................$149.99843905 modular stand ext. ............. D/S ..........................$79.99


43A23 DW625 3 HP VSE plunge router D/S .......................$299.9943A22 DW682K Plate Jointer D/S.......................................... $189.99

DeWALT 20" Heavy Duty Variable SpeedScrollsawModel DW7881.3 Amp, 400-1,750 strokes per minute 20" throat. Cast-iron table tilts 45° left and right and has a capacity of 2" thick stock at 90°. Up-front controls, tool-free blade change system, single

lever tensioning, and an upper arm that lifts out of

the way for threading blades through pre-drilled holes make this a truly user friendly scroll saw.

Shipping weight 68 lbs.127233 ............................ $549.99813079 stand .....................$89.99813083 work light ..............$39.99

DeWALT 13" Two Speed Planer Model DW735XA 15 Amp motor drives the cutterhead at 10,000 RPM for cuts, up to 1/8". Three knife cutterhead delivers 30% longer knife life and makes knife changes easier. Two-speed gear box optimizes cuts at 96 or 79 per inch.

Automatic carriage lock reduces the movement that causes snipe. Maximum

depth of cut 1/8", 6" depth and 13" width capacity. Includes dust

hose adapter and ejection chute. 92 lbs.845599WH ........................$649.99825518 stand ..................$194.99

DELTA 10" Unisaw 3 HP LT, With 52" Biesemeyer Fence SystemModel 36-L352***Same specs as above.842828 D/S ................... $3,299.99Shipping weight 661 lbs., regular shipping rate plus $125. FREE STANDARD SHIPPING!

DELTA 10" Unisaw 3 HP LT, With 36" Biesemeyer Fence SystemModel 36-L336*** • Single-Cast Trunnion System provides increased accuracy • Sure-Lock Dual Front Cranks • Precision Bevel Gauge • Tool-Free Split Guard • 2-Position, Quick Change Guard System improves safety• BIESEMEYER fence system and accessory drawer• 5 Year Warranty • Motor: 3 HP, 220V, 1 Phase, 60 Hz 412405 (shown) D/S ...... $3,175.99Shipping weight 624 lbs., regular shipping rate plus $125. FREE STANDARD SHIPPING!


Power Tools

2i-Drill 12-Volt Lithium Battery Powered2-Gear Variable Speed Drill DriverSpecs:• Power: 12 volts• Two Ranges: 0-400 RPM & 0-1,300 RPM (no load speed)• Forward and reverse• Chuck size: .04-.4" (1-10mm) one-piece with Spindle lock• Johnson motor, #600• Max. soft/hard torque: 10/25 Nm• 2 Sanyo Lithium Ion batteries: 1.3Ah.• Charging Time: 45 – 60 minutes• Weight: 1.75 lbs. w/o battery packIncludes: 2-Speed Drill Driver, Two 1.3Ah Sanyo Lithium Ion batteries, Built-in LED work light, Tool stand, International charger151253 ...............................$109.99

8

CarveWright™ The CarveWright™ is a revolutionary compact and powerful CNC Woodcarv-ing Machine. Measuring only 15" x 18" x 26", the rising head and feed through configuration accepts work pieces 141/2" inches wide, 5" high, and with proper support nearly any desired length. Using the CarveWright™ wood-working system is as easy as 1-2-3

1. Design using CarveWright™ Designer software.2. Upload the project to a special memory card3. Insert the memory card into the CarveWright™

The onboard LCD display will guide you, step by step, through your project. CarveWright™ can be used for routing, cutting, carving and jointing and has a patented "Quick Change System" for

quick and easy bit changes. Carve-Wright™ will automatically choose the correct bit for your job and measure your work piece.

An intuitive and easy to use PC or Mac compatible Software Package allows you to manipulate your design on a 3-dimensional representation of your work piece. Images can be "dragged and dropped" onto the work piece display; combine images, add text, size and re-shape, or adjust the carv-ing depth. You can even draw your design using 2D drawing capabilities. The CarveWright™ woodworking sys-tem comes equipped with one carving bit, one cutting bit, two 1/4" bit adapt-ers, vacuum bag, a bit removal tool, a CarveWright™ memory card with programmer, CarveWright™ design software, user's manual and a one year warranty. 148544 D/S ...................$1,899.99148706 repl. 1/16" carving bit ........... D/S .......................... $39.99148707 repl. 1/8" straight bit ........... D/S .......................... $39.99

CarveWright™ Scanning ProbeThe CarveWright scan-ning probe opens up the world of 3D scan-ning to anyone. Now you can reproduce original pieces, repair antique furniture, and even copy trim and moldings with ease.

Almost any material can be scanned -- even soft materials such as clay or wax. Scanning resolution up to .005 inches are possible. Just plug the probe into the CarveWright, set the desired scan area, and watch the CarveWright go to work. With the included CarveWright Import software you can manipulate the 3D output to meet your needs.148545 D/S .......................$299.99

CarveWright™ Full Bit SetConfigured specifi-cally for the CarveWright System, these top quality, all carbide bits, are de-signed for long-life and precise cutting performance. The Bit Set includes 60 degree V-Bit, 90 degree V-Bit, 1/4" diameter Ball Nose Bit, 1/2" diameter Ball Nose Bit, 3/8" diameter Straight Bit,

3/8" radius Classic Ogee Bit, 1/2" radius Classic Ogee Bit, 1/8" radius Roman Ogee Bit, 3/16" radius Roman Ogee Bit, 1/4" radius Round Over Bit, and 1/2" radius Round Over Bit.148546 D/S .......................$299.99

MAKITA61/2" Plunge Circular SawModel SP6000K• Precision cutting delivers splinter-free mirror finish• Electronic Speed Control (2,000- 5,200 RPM)• Powerful 12 Amp Motor • Electronic Soft Start Feature for Smooth Start-Ups • Electric brake • Large Cutting Capacity (23/16" at 90° and 19/16" at 45°) • Bevel capability (-1° to 48°) with positive stops at 22.5° and 45° • Close to the wall cutting (11/16") • Built- in depth stop allows a preliminary cut of 1/16" for clean and splinter-free cutting • Large 17/16" rear dust port • Optional guide rail system • Saw base is attachable to other guide rail systems Includes: Carbide-Tipped Blade - 48T, Hex Blade Wrench, Plastic Tool Case. Shipping wgt. 6.2 lbs. 843039 .............................$399.99843040 rail guide, 118" ....$249.99843041 rail guide, 55" ........ $99.99843042 clamp set ............... $39.99

TRITON 31/4HP RouterModel TRC001Triton’s router has features that set it solidly above the competition!• Auto lock, through-the-base bit changing• Rack & pinion plunge mechanism that converts to free plunge• Cut guide fence w/circle cutting• Easy to set turret stops• Max. plunge depth of 25/16" • Max. bit diameter of 3"• 21,000 RPM VS with Soft Start• Electronic speed maintenance under load• Winder handle for table mounted adjustments Includes 1/4" collet reducer and 1/2" straight carbide bit, base plate with edge guide and circle cutter.150289 TRC001 ................$269.99 150288 MOFOO1 21/4HP ..$229.99Accessories150882 7-piece template .... $49.99150883 adapter plate ..........$15.99

TREND T4 1.1 HP VS Plunge RouterIntroducing Trend’s T4EK is a light duty 1.1 HP plunge base router with electronic variable speed motor. This plunge router is ideal for inlaying, sign making, edge molding or any other light duty routing applications. A convenient spindle lock makes short work of bit chang-ing. With the easily removable router base, the T4EK motor is perfect for any power carving enthusiast. Includes three collets (1/4", 6mm and 8mm), a clip-in dust spout, a 5/8" template guide bushing, edge guide and storage case.840791 ...............................$129.99


BOSCH 12" Dual Bevel, Glide Miter SawModel GCM12SD• Powerful 15amp motor, 3,800 RPM no-load speed• Patented Axial-Glide™ System: Unmatched prec is ion and smoothness. • Cutting Capacity: 14" horiz. capacity (nominal); 61/2" vert. capacity against the fence (base); 61/2" crown capacity against the fence (45° spring)• Upfront Bevel Controls: For quick and easy bevel settings without reaching behind the saw• Integrated Expanding Base Extensions: 40 inches left to right • Bevel Angle Range: 48�°left/48°right• Miter Angle Range: 52° lt./60° rt.• Bevel Detents: 0, 33.9°, 45° left/ right for accurate cuts• Weight: 65 lbs.Includes: 12" 60T Blade, material clamp and dust bag152580 ...............................$799.99

BOSCH Gravity Rise Miter Saw Stand Setup and breakdown in seconds with-out removing the saw on the Bosch T4B Gravity Rise Miter Saw stand. Features adjustable material supports and repetitive stops, rapid release universal tool mounts, 8" pneumatic wheels and adjustable leveling feet. Constructed of powder coated 11/2" tubular steel and designed to fit most miter saws. The expansion rails provide material support up to 18 ft.841931 ...............................$339.99

BOSCH 41/2" Paddle Switch Angle Grinder The Bosch 1810PS has the power and performance needed for any power carving applications that specify a 41/2" angle grinder. • Paddle Switch with lock-on mechanism for better operator comfort and control • ServiceMinder™ brushes will stop the tool when preventive maintenance is required • Amperage: 8.0; No Load RPM: 11,000

• Max. Motor HP: 1.1 • Spindle Thread: 5/8" - 11 • Weight: 4.3 lbs. Includes: Multi-Position Guard, Vibration Control Auxiliary Handle, Flange Kit, Spanner Wrench and Abrasive Wheel 835918 ................................. $89.99

Power Tools

Helping You Make Wood Work®

RIKON 6" Belt-10" Disc SanderModel 50-120*• 3/4 HP, 110V induction motor• 6" x 48" belt operates both vertically, horizontally• 10" disc sander• 8" x 14" cast iron table tilts to 45° (standard 3/8" x 3/4" T-slot)• Heavy-duty cast-iron base• Quick-release belt tension lever• 21/2" dust portIncludes: heavy-duty miter gauge, accessory work support for working in the 90 degree vertical position.Shipping wgt. 110 lbs., regular shipping rate plus $55.828577 .............................$429.99831666 stand ...................... $69.99146964 150 grit PSA disc ..... $4.99146965 180 grit PSA disc ..... $4.99146966 240 grit PSA disc .... $4.99

RIKON Mini LatheModel 70-100• 1/2 HP, 115V TEFC motor• Six speed (430, 810, 1,230, 1,810, 2,670, 3,900 RPM)• 12" swing and 16" between centers • Ability to add one or more bed extensions• 12 position indexing head• Self-ejecting tailstock with 21/2" ram travel• Easy access to the top and bottom pulleys for quick speed changes• #2 MT head stock• Overall dimensions: 32"L x 101/2"W x 19"HIncludes: 8" tool rest, live center 3" face plate, spur center, and tooling knockout. Shipping weight 89 lbs.832637 ...........................$399.99 832638 241/2" ext. bed ...$109.99832639 6" face plate ........ $24.99832640 4" tool rest ............$17.99832641 6" tool rest ...........$21.99833262 stand ................. $179.99 833263 extension ............. $99.99

9

RIKON14" Deluxe BandsawModel 10-325**• 11/2 HP, 110/220V motor• 2 speeds (1,445 & 2,950 ft/min) • 13" resaw capacity • Micro-adjustable blade guide bearings• Quick-release blade tension • 16" x 201/2" cast-iron table • Cast-iron wheels • Accepts 111" blades (1/8" to 3/4" max. width)• 4" dust portIncludes: work light, heavy-duty fence with re-saw bar. Shipping wgt. 261 lbs., regular shipping rate plus $75.834771 ............................. $949.99

RIKON18" 2-HP BandsawModel 10-345***• 21/2 HP, 220V induction motor• 2 speeds, 1,510/ 3,220 ft/min• Accepts 142" blade (1/4" to 11/4", max width)• Cast-iron upper and lower wheels• Quick-release blade tension lever • Q-release top wheel blade tension• Cast-iron upper and lower wheels• Upper and lower ball bearing blade guide• Cutting height is 12" & width is 183/8"• Table width is 21" x 19" and includes 2 “T”-slot grooves• Table tilts 10° left and 45° right, height from floor is 375/8"• Two 4" dust ports • Two-year warranty Shipping wgt. 500 lbs., regular ship-ping rate plus $125.833083 ..........................$1,499.99

RIKON 12" 1/2 HP Disc Sander Model 51-200• 1/2 HP, 120V, 6 Amp, 1,720 RPM motor• 171/8" x 61/2" table (3/8" x 3/4" miter slot)• Rack-and-pinion table adjustment• Table tilts positive/negative (detents 0°, 22.5°, 45°)• Paddle on safety switch for quick shut down • Cast-iron base with mounting holes • Manual brake• Dust port (21/4" I.D or 21/2" O.D.) Includes: miter gauge, (1) 80 grit abrasive disc and a two-year warranty.839953 ...............................$219.99

An asterisk indicates that this item is shipped by common carrier at our regular Shipping & Handling rate, plus an excess weight charge. *=$55, **=$75, ***=$125. See Ordering Info page for details.

NOVA Wood LatheModel 1624-44** • 11/2 HP, 115V motor • Reversible motor function• 8 speeds (215; 360; 904; 1,030; 1,450; 2,180; 2,900; 3,630 RPM)• Quick-speed changes using proven cam action• Solid cast-iron construction • 360° Swivel head• 24 position indexing• 24" between centers • Bowl turning capacity: 16" onboard • 29" outboard when using optional outboard tool rest assembly• 11/4" x 8 TPI spindle• Quick-Action Cam Controls• Steel Stand• 20" Optional Extendable Beds availableIncludes: 3" faceplate, 12" tool rest, #2 MT live center, #2 MT spur center, and a five-year mechanical warranty, one year motor warranty. Shipping weight 260 lbs., regular shipping rate plus $75. 147595 .................................................................................................... $1,249.99

DVR XP & 1624-44 Lathe Optional Accessories include a steel hand wheel that accepts our ball bearing, shop vac adaptable vacuum kit for vacuum faceplate turning.126228 steel hand wheel ..................................................................$29.99146901 20" bed extension ..............................................................$239.99125761 outboard tool rest assembly .............................................$294.79126226 HD bowl rest with 1" shank ..................................................$47.99142468 3" tool rest ............................................................................$24.99143659 extended stand ................................................................. $209.99148552 cast iron stand ...................................................................$429.99

RIKON10" Bench TopBandsawModel 10-305• 1/3 HP, 3.5 amp motor• Speed 2,780 ft/min.• Safety paddle switch • Cutting capacities: Height – 45/8" Width – 95/8" Table – 13" x 12"• Edge-Facing Thrust Bearings• 701/2" blade range from 1/8" to �1/2"150503 ...............................$299.99831665 stand ....................... $59.99846362 miter gauge ............. $15.99

RIKON 4" x 36" Belt/Disc Sander Model 50-110• 1/3 HP, 110V induction motor• 6” Disc sander• The 9" x 61/4" cast iron table tilts to 45° w/ standard T-slot828563 ...............................$139.99

RIKON Dust Collector With 5-Micron Filter• TEFC Motor' Continuous Duty • Built-In Casters

Model 60-100B • 1 HP, 110V, 7 amp• 650 CFM • Balanced 9" Steel Impeller• 5 Micron Top Bag, Reusable 143/4" Clear Plastic Lower Bag• 4" Inlet 847117 1 HP ......................$279.99

RIKON Dust CollectorModel 60-200B • 2 HP, 110V, 16 amp• 1,250 CFM • Balanced 12" Steel Impeller• 5-Micron Top Bag, Reusable 20" Clear Plastic Lower Bag• Quick Release Straps For Lower Bag Changing • Dual 4" Inlets847118 2 HP ......................$399.99

NOVA DVR XP Lathe*• 13/4 HP, 115V, 15 Amp (2 HP, 220V) direct drive motor • Computer Controlled using Adaptive Control™ Software • Programmable with 5 favorite speed pre-sets• Electronic variable speed with forward andreverse (100 to 3,500 rpm)• No pulleys or belts for maximum torque transfer• Solid cast iron construction – single casting headstock• Incredible turning smoothness• 360° Swivel head• Spindle lock and 24 position indexing• 24" between centers • Bowl turning capacity: 16" onboard - 29" outboard• 11/4" x 8 TPI spindle• Quick-Action Cam Controls• 20" Extendable Beds available• Optional Cast-Iron Stand availableIncludes: 3" faceplate, 12" tool rest, #2 MT live center, #2 MT spur center, and a full five-year limited warranty. Shipping weight is 200 lbs., regular shipping rate plus $55. Optional Accessories: see below.146719 DVR XP .................................................................................... $2,249.99


Power Tools

10

Porter-Cable 371K Compact Belt SanderThis 5 Amp sander turns a 21/2" x 14" belt at 1,100 SFPM. Low center of gravity, combined with ergonomic rubberized non-slip grips, a removable auxiliary front handle, and a unique cord exit grip, offer flexibility and control necessary for any sanding job. The removable dust port accepts both 1"ID and 35 mm

OD vacuum hoses.Includes sander, 80 grit sanding belt, carrying case,

and operating manual. Overall unit length is 103/4", and weighs 5.75 pounds.

835315 ............................ $119.99835645 belt assort. (5-pc.) $11.99148464 60 grit belts (5) .....$10.99148465 80 grit belts (5) ....$10.99148466 100 grit belts (5) ...$10.99148467 120 grit belts (5) ...$10.99148468 150 grit belts (5) ...$10.99148469 180 grit belts (5) ...$10.99

Porter-Cable Plate Jointer KitModel 557 Biscuit joinery in stock widths as narrow as 11/2"! A powerful 7.5 Amp motor 0° to 135° tilt fence with micro-adjust capability and spindle lock for easy

blade changes. Front handle is attached to the fence, not the motor, Kit includes: 2" (face

frame) and 4" (standard) diameter blades, center-ing plate, spanner wrench,

1" port with dust bag, HD plastic storage case.813666 D/S ....................... $219.99

Porter-Cable 390K 5" VS Random Orbit SanderThis low profile hook and loop sander was designed with optimized ergo-nomics that not only allows for better comfort and control. Featuring state-of-the-art EnduraTech “brushless” Motor technology that has 71% fewer wear components for five to ten times longer motor life. The 390K’s new motor technology provides a side

benefit of electronic speed control under load for 42% fas te r mater ia l removal and electronic

braking that reduces free-spin by 73% for increased productivity. An integral dust port accepts 1" and 11/2" vacuum hoses for optimal dust collection. Specifications: Amps: 3.5, Orbit/Min: 7,000-12,000 OPM, Tool Height: 4". Includes: kit box, operating manual, and 3-year limited warranty. 149120 ...............................$109.99

OSBORNE Table Saw Miter Gauge The redesigned Osborne gauge brings you the advantages of a new patented triangular design more stable and accurate miter cuts on your table saw. New features include a guide bar with three expansion slots to provide a more positive fit in your saw. Bar adjustments are made from the top for an easy and perfect fit on your saw. A new fence extension allows for solid support of long material and carries the flip stop out to 42 inches.

To adjust the fence closer to or farther from the blade, loosen the two fasten-ers on the rear of the

fence then position the fence exactly where you want it and retighten the knobs. Lastly, this gauge produces accurate cuts,

accurate to within 1/30°; if calibration is ever necessary, use the ZERO cali-bration adjustment feature.148941 ............................. $124.99


motor, large 131/2" x 231/2" table surface, no tools required finger operated blade clamps, easy access speed and tension controls, orga-nized blade storage on base, and onboard dust

blower. Specifications: Throat: 21"; Maximum cutting depth: 2"; variable speed: 400-1,550 SPM; Dimensions: 15" H, 15" W, 32" L; Weight: 65 lbs. Includes operation manual and 2 year warranty. 148838PS* ......................... $819.99148839 stand ................... $116.99148840 footswitch.............. $24.99*FREE stand with 148838PS purchase.

EXCALIBUR 21" Scroll Saw Model EX21FREE STAND*The Excalibur 21" variable speed scroll saw’s unique design provides a stable platform when cutting straight or on an angle. Unlike other scroll saws where the table is tilted for angled cuts, the entire head of the Excalibur tilts 45° to the left or the right. This allows the user to better control the work piece on a flat table surface, for a more safe and accurate cut. Additional features include a 120V 1.3 amp constant torque permanent magnet

SAND-FLEE Portable 18" Drum Sander• 1/3 HP, 115V, 1,725 RPM Baldor� motor• 1/4" thick, steel top nickel-plated w/front T-Slot• Powder-coated steel base• Integral down-draft system for superior dust collection• 18" wide, precision machined aluminum drum, for hook & loop style sandpaper• 18"-36" of sanding width and unlimited height• 24" extruded aluminum fence

• 21/2" dust port•Extended drum

shaft for mounting keyless chuck

•Sandpaper, keyless chuck and double mops

sold separatelyVisit Woodcraft.com for a complete offering of SAND-FLEE� sandpaper and sanding accessories. 149212 .............................$699.99410112 1/2" keyless chuck $26.50410110 stand ....................$154.99835387 fence ......................$80.99


839566 10-105 M1, 1.5 HP, 115/230V, 2 micron filter ..................$469.99834847 10-005 M1, 1 HP, 115/230V, 2 micron filter .....................$319.99832179 10-105CF M1, 1.5 HP, 115/230V, canister filter ...............$619.99829232 75-050T M1*, 5/8" hollow chisel mortiser ......................... $589.99834091 50-EXBC 10 Excalibur over arm blade cover ...................$399.99

GENERALBench Top 14" Drill PressModel 75-030 M1*�• 1/2 HP, 120V, 60Hz industrial rated motor• 31/8" quill stroke• 5/8" chuck capacity • Cast iron, precision machined 5-step pulleys• 5 speeds: 280 - 3,000 RPM• Built-in work light (bulb not included)• Rapid-adjust drill stopIncludes bonus laser guide and chuck guard• 106 lbs. 841427 ...............................$339.99

Excalibur 16" VS Scroll Saw Model EX16• Variable speed: 400-1400 SPM, 120V, 1.3 amp constant torque motor. • Tilting Head - 45°left or the right• Upper and lower parallel arms• Tool free blade changing • Upper arm lift is ideal • Easy access controls• Large 12" x 18 1/2" table surface • Throat: 16", Max. cutting depth: 2"• Standard 5" straight blades Includes operation manual and 2-year warranty. 847194 ............................. $574.99148839 stand ................... $116.99

SAND-FLEE Portable 9"Drum Sander• 1/3 HP 115V, 1,700 RPM motor• 1/8" zinc-plated steel top • “New” Micro-height-adj. knob• Integral down draft dust collection

• 9" wide, CNC- machined aluminum drum, hook & loop fastener • 9"–18�" sanding width • 21/2" dust port• Sandpaper, keyless chuck, fence, and double mops sold separately150101 ...............................$399.99150131 sand pk. 120, 180, 220 grit, 3" x 10 yards, 3 rolls ....... $39.99

Porter-Cable 13/4 HP RouterModel 690LR. Powered by an 11 Amp motor at 27,500 RPM, the 690 has been the industry standard for years. The included 1/2" & 1/4" col-lets feature an auto-release system that ends “frozen” bits.

The motor housing and base are precision cast aluminum to help dissipate heat. The accurate micrometer depth-of-cut ad-

justment allows easy height adjustment of 1/128". Includes: 1/2" & 1/4" collets, two collet wrenches, and manual.

143163 D/S ................$159.99

Porter-Cable 21/4 HP VS Router KitModel 895PK Powered by a 21/4 HP, 12 Amp var iable -speed motor with elec-tronic-feedback cir-cuitry that provides constant speed: 10,000 – 24,000 RPM. An auto spindle lock and collet access from above the router table

enables you to change bits with-out removing the motor. He ight Adjustment han-dle allows you to

lock, unlock, and adjust the bit height from above the table when used in a

router table. Includes fixed and plunge bases, and carrying case.826473 (A) ..........................$279.99826472 (B) w/"D" handle ...$279.99

B

A

Porter-Cable 31/4 HP RouterModel 7518This industrial-quality router features an electronic five-speed 15 amp motor with a range from 10,000 to 21,000 RPM. The specially engineered 1/2" collet auto-

releases the bit, eliminating bit “freeze-up”. Another unique design puts the bottom bearing closer to

work for minimum bit run-out and vibration.85O28 ......................$349.99 821719 motor, only ........... ..............................$299.99

Power Tools


Pneumatics

11

FLEXEEL 25' Polyurethane HoseExt remely lightweight and tough, for either outdoor or indoor use. T h e 5/1 6" diameter hose retains its flexibility, rated at -40°F to +165°F at working pressure to 200 PSI. Includes 1/4" industrial quick disconnect fittings and strain relief ends.145766 ................................$35.50

PORTER-CABLE Pneumatic Nailers & StaplersPorter-Cable’s pneumatic line is built tough! All guns have strong & light weight die-cast bodies, special hard-ened driver blades and quick release nosepieces for easy jam clearance. Each kit includes a gun, case, oil, 1/4" connector plug and wrenches.

(A) Narrow Crown Stapler Kit, Model NS150B. Oilless. Uses standard 18 gauge, 1/4" narrow crown wire staples from 1/2" to 11/2" long. Kit includes 1,000 staples.149164 D/S .......................$109.99

(B) Brad Nailer Kit, Model BN200B. Oilless. Uses 18 gauge brads from 3/4" to 2" long. Kit includes 1,000 brads.149165 D/S .........................$99.99

(C) Pin Nailer Kit, Model PIN100. Uses standard 23 Ga. pins from 1/2" to 1". Kit includes 2,000 3/4" pins.820946 ..............................$124.99

A

B

C

GREX HeadlessPinnersModel P635 - 13/8", Model P645 - 13/4", Model P650 - 2". The Grex industrial strength 23 gauge Headless Pinners utilize patented magazines that eliminate the need to adjust for different fas-tener lengths. The powerful motors will drive fasteners from 3/8" up to 13/8" (P635) or 13/4" (P645), or 2" (P650) with ease. The compact, lightweight, slim profile is very maneuverable and features a rear exhaust with built-in silencer. Weight: 2.68 lbs. (1.2 kgs.), (3.25 lbs., P650) operating pressure: 60 - 100 psi, air inlet: 1/4" (6mm) NPT male plug.

836278 ..........P635-13/8" (shown) ............................$199.99836086 P645 - 13/4".........$279.99838673 P650 - 2" ............$309.99149858 No-Mar tips ..............$8.99

Driver Kit149854 fits P635 ............... $34.99149855 fits P645, P650 .... $48.99

O-Ring Kit149856 fits P635 ................. $9.99149857 fits P645, P650 .... $12.99 Retractable Reel

39' Polyurethane Air Hose This retractable polyurethane air hose reel eliminates the hassle of dragging air hoses out and then having to recoil them for storage. Mount the hose reel in your shop or garage and you will al-ways have a high quality polyurethane air hose at your finger tips and storing the hose use is a snap. Simply retract the air hose into the reel and it is neatly store, ready and waiting for use. The 1/4" diameter hose retains its flexibility even in the coldest of conditions, is rated at -40° F to +165° F, and for a working pressure of 200 PSI.150316 ................................. $69.99

FREEMAN 18Gauge, 2" Brad NailerThe Freeman 18 Gauge, 2” Brad Nailer is per-fect for those woodworking projects that need a higher degree of fastening strength. The lightweight ergonomic design provides a good feel for the perfect balance during operation, operates on 60-100psi and utilizes Teflon� O-rings to insure a longer life and trouble free opera-tion. Uses standard 18 gauge brad nails from 3/8" to 2". Includes 7 year limited warranty, reversible belt hook, goggles, oil, and wrenches. 845003 ................................ $59.99

FREEMAN 23 Gauge, 1" Micro PinnerPerfect for those smaller projects like decorative trim, small pic-ture frames and cabinetry trim. The lightweight ergonomic design provides a good feel for the perfect balance dur-ing operation. Operates on 60-100psi and utilizes Teflon� O-rings to insure a longer life and trouble free operation. Uses standard 23 gauge pins: 1/2", 5/8",3/4", 7/8" and 1". Includes 7 year limited warranty, reversible belt hook, goggles, oil, and wrenches. 845001 ................................ $59.99

FLEXEEL 15' Coil Polyurethane HoseA great alter-native to long t r o u b l e s o m e air hoses. This compact, tightly coiled hose is extremely light-w e i g h t , f l e x -ible and tough, ideal for outdoor contractor use, indoor industrial use or the home hobbyist looking for high quality versatile air hose. The 1/4" diameter hose retains its flexibility even in the coldest of conditions. Rated at -40°F to +165°F with a working pres-sure of 200 PSI.149029 ................................. $26.99

Brads & Staples For Porter Cable, Senco, Accuset and most popular brands. Brads and staples are 18 gauge.845367 3/4" brad, 1,000 .......$2.99813327 11/4" brad, 1,000 ....$3.99846295 2" brad, 5,000 .......$16.99845368 2" brad, 1,000 .........$5.50846306 11/2" staples, 5,000 $19.99

21 Gauge Brads & Pins Packs of 5,000145771 1/2" pins ..................... $7.50145773 5/8" pins ..................... $7.50145775 13/16" pins ................. $9.99145777 1" pins ...................... $9.99145779 13/16" pins ..............$11.99145772 1/2" brads .................. $7.50145774 5/8" brads .................. $7.50145776 13/16" brads .............. $9.99145778 1" brads ................. $12.50145780 13/16" brads ............$12.99

EZ-Fasten 21 GaugePin & Brad NailerModel MBP30. This pneumatic nailer, with trigger safety, incorporates the best of both worlds- the strength and versatility of a brad nailer with the inconspicuous fastening capability of a pin nailer. A 21 gauge Pinner/

Brad Nailer is ideal for projects that are too big for a standard 23 gauge pinner and too small for an 18 gauge brad nailer – picture frames, moldings, or just about any detail work that you could think of. The MBP30 accepts 21 gauge headed brad nails or 21 gauge headless pins ranging from 1/2" to 13/16". Includes carrying case and instruction manual.149121 ...............................$129.99

GREX 23 Gauge Headless Pins 500 pieces each of 13/16", 13/8", 11/2", 13/4" & 2" Pins. For use in Grex Model 650, 23 Gauge, 2.5K Per Box.151234 ................................. $15.99

23 Gauge Headless Pins2,500 per Box151224 3/8" ........................... $6.99151225 1/2" ............................ $7.99151226 5/8" ............................ $7.99151227 3/4" ........................... $8.99151228 1" ............................. $9.99151229 13/16" ..................... $13.99151230 13/8" ....................... $14.99151231 11/2" ....................... $16.99151232 13/4" ....................... $19.99151233 2" ........................... $23.99

10,000 count boxes 147855 3/8" ........................... $8.99836088 1/2" ........................... $9.99836090 3/4" .........................$11.99836092 1" ........................... $13.99148940 13/16" ..................... $19.99836095 13/8" ....................... $16.99836096 11/2" ....................... $19.99836097 13/4" ....................... $23.99838672 2" ............................$27.99

Stainless Steel 23 Gauge Pins & 18 Gauge Brad FastenersThese high quality stainless steel nails are perfect for projects that are exposed to weather or in highly humid areas.

18 Gauge Stainless Steel Brad Nails Packs of 500842786 1/2" .........................$27.99842787 1" .......................... $32.99842788 11/4" ...................... $34.99150141 11/2" ...................... $36.99150142 2" .......................... $38.99

23 Gauge Stainless Steel PinsPacks of 1,000 150149 1/2" ........................ $14.99150150 3/4" ........................ $19.99150151 1" .......................... $20.99150152 11/4" ...................... $23.99150153 11/2" ...................... $29.99150154 2" .......................... $32.99

WoodRiver®

1.5 HP Air Compressor Specs:• 1.5 HP, 11 Amp.,120V, 1 ph oil lubricated pump• 2 gallon tank • 115 PSI operating pressure, 125 PSI max.pressure 2.76 SCFM @ 40 PSI, 2.30 SCFM @ 90 PSI• ASME safety valve• Thermal overload protector and reset• Durable enclosed air filter• Air pressure regulator and easy to read pressure gauges• 1/4" universal one-touch quick-couplerAccessories: 1/4" x 25 ft. coil air hose, 1/4" male coupling, tire inflator, air blower with adaptor, nozzle and needle inflators.150991 ............................... $119.99


Power Tools

12

Dust CollectionTable-TopDust CollectorThe Table-Top Dust Collector picks up dust and chips at the source with its huge 123/4" tall x 16" wide open-ing that funnels to a 4" dust collection fit-ting. Also works with sanders, miter saws, or radial arm saws. 10" deep, ABS plastic.144614 .....................................................$22.99

21/2" Clear Pipe Dust Collection KitConnect up to five machines to a dust collector or shop vac. Kit contains eight 36" x 21/2" O.D. clear pipe sections, four “T” connectors, twenty pipe connectors, five blast gates, eight 45° elbows, four 21/2" O.D. x 2" elbow connectors (to create up to four 90° turns as needed), one 4" to 21/2" reducer, and ten metal mounting brackets. For use with dust collectors or shop vacs with a 100 CFM rating.142607 ..................................................... $81.99

Dust Collector Accessory KitsStarter Set is designed for single machine hook up. Contains 6" jointer, universal, and table saw dust hoods, one 4" x 10' dust collector hose, and two stain-less steel clamps.129486 ................................................... $32.99

Multiple Machine Set for multiple machine hook ups. Contains 6" jointer, table saw, and universal dust hoods, floor sweep, 4" Y connection, four 4" ABS blast gates, ten stainless steel 4" clamps, and two 4" x 10' flexible dust collector hoses.129487 ....................................................$71.99

4" Poly Blast Gate BracketThese brackets hold any of the 4” plastic blast gates listed below at a convenient location making opera-tion so simple you will use your dust collector each and every time you use a tool. The brackets can be mounted vertically or horizontally and a channel in the bracket captures the flange of the blast gate so the gate can be operated from either side or the front. Slots are provided to permanently mount your blast gate. Blast gates sold separately.150513 bracket for 4" poly blast gates ..... $3.99

Dust Extraction FittingsThese economical fittings will help you to build a high performance dust extraction system for your shop. Made of ABS plastic (except for the aluminum blast gate), these fittings are designed to stand up against the abrasive nature of saw dust and wood fiber. The floor sweeper collector (24" x 7") is designed to be taped to the floor in a convenient spot where you can sweep shavings into it. Because of the danger of static electricity involved with dust collection we highly recommend the book Dust Collection Basics be read prior to any installation.85O09 (A) 12" x 12" table saw fitting .........$7.9985O14 (B) 8" x 8" jointer fitting ................. $5.9985O16 (C) 4" Y fitting ..................................$7.99144930 (D) 4" x 4" x 21/2" Y fitting .............. $5.9985U65 (E) 4" to 21/2" reducer fitting ........ $5.50144534 (F) 4" to 21/4" reducer fitting ........$4.9985O15 (G) 4" T fitting ................................. $7.9985O11 (H) 4" elbow ................................... $6.9985O12 (I) 4" splice ..................................... $4.99140259 (J) 4" hose to 4" O.D. quick-disc. $6.5085O07 (K) 4" aluminum blast gate ....... $12.5085O10 (L) floor sweep collector ................ $9.9985O13 (M) 21/2" router fence dust fitting $4.99

85O06 (N) 4" ABS blast gate .................... $5.99144770 21/2" hose hangers (5) .................. $2.50144771 4" hose hangers (5) ...................... $5.29140791 (O) 6" to 1" universal adapter ........$7.99151193 (P) 4" to 1" multi-step reducer ...... $4.99142173 (Q) universal tool adapter ............. $9.99149578 (R) 21/2" aluminum blast gate ....$10.99149579 (S) 4" 45° elbow............................ $5.99146489 (T) 4" swivel fiting .......................... $9.99152674 4" flanged inlet fiting .................... $3.99149577 (U) ABS quick-conn. thread gate ...$7.99142767 (V) ABS blastgate 4" hose to 4" O.D....... ...................................................... $5.99149576 (W) self clearing 4" blast gate ...... $8.9985O17 Dust Collection Basics .................$7.99

4" Universal Fitting. You can use this dust collection fitting to hook your 4" diameter hose up to any flat surface. The 45° angled opening promotes flow and provides a solid area to clamp the hose. The flat portion of the 53/4" x 51/4" fitting has 3/16" dia. holes at each corner for easily attachment to any surface.144654 ........................................................ $4.99

J

I

A

K

L

NB

HGE

MC

O

P

Trash Can Cyclone LidWith this lid and a common trash can you collect the larger and heavier shavings and dust before they reach your impeller and dust collection bags. A foam gasket provides a supe-rior seal and an elbow fitting under the inlet side induces a cyclonic air flow. Accepts 4" hose. Fits standard 30-gallon metal trash cans.143290 ............................ $28.99

Mini Dust Collection Separator. For use with shop vacs. Similar to above, but fits on a 5-gallon bucket. Inlet and outlet accept a 21/2" hose. ABS plastic.143868 5-gallon separator .......................$20.99

D

F

Q

RS

TU WV

Quick Disconnect FittingsEasily move your portable dust collector with-out loosening and tightening hose clamps. with these quick disconnect 4" fittings and an airtight friction fit.143660 (A) dbl. ended 4" to 4" O.D. fitting $4.99150907 21/2" hose to 4" O.D. fitting ........... $4.99142767 (B) ABS blastgate 4" hose to 4" O.D. ..... ...................................................... $5.99

B

A

Dust Collection

Helping You Make Wood Work®�

Light-Duty�Semi�Clear�Dust�Collection�HoseFlexaust hose provides an economical solution for central and portble dust collection systems. Semi-clear material offers a constant view of ship and dust flow so obstructions are visible. This lightweight, polyurethane hose is reinforced with a polyurethane helix and has smooth interior walls for efficient air flow. 10' lengths.151249 4" diameter .................................. $21.99151250 21/2" diameter ...............................$15.99

Wire�Hose�Clamps� Each 10+85U66 4" wire clamp (1) ......... $1.99 .......$1.79140606 21/2" wire clamp (1) ..... $1.99 .......$1.79

13

Dust�CollectionGrounding�Kit�Make your plastic dust col-lection system safer with the use of a grounding kit. Kit includes 50' of braided 14 gauge copper wire, grounding screws, wire nuts and terminal ends for complete installation.812502� ......................................................$17.99

Hose�Clamps(A)�Keyed�Hose�Clamps�have a thumb screw that allows you to quickly tighten or loosen them without a screwdriver or wrench. Each 10+141933 21/2" clamps (2) ........... $3.99 .......$3.59141934 4" clamps (2) ................$4.99 .......$4.49

(B)�Quick�Release�Band�Clamp. Lift to release this stainless steel band clamp and slide it to adjust. Each 10+141397 4" ................................. $1.99 ....... $1.79150789 21/2" ............................. $1.99 ....... $1.79

Standard�Hose�Clamps.� Each 10+127762 21/2" clamp (1) ............. $1.50 .......$1.3585O08 4" clamp (1) ................. $1.50 .......$1.35

Wire�Hose�Clamps.� Each 10+140606 21/2" wire clamp (1) .... $1.99 ....... $1.79�85U66 4" wire clamp (1) ......... $1.99 ....... $1.79

B

A

Heavy-Duty�Clear�Dust�Collection�HosePolyurethane dust collection hose offers the maximum combination of flexibility and abrasion resistance across a temperature range of -65° to 225°F. Reinforced with a spring steel wire helix for excellent compressibility as well as cut, gouge, and chemical resistance. Designed to handle the rigors of a portable dust collection system as well as permanent installations. 10' lengths.147881 21/2" diameter ...............................$29.99

Wire�Hose�Clamps� Each 10+85U66 4" wire clamp (1) ......... $1.99 .......$1.79140606 21/2" wire clamp (1) ..... $1.99 .......$1.79

Mr.�Nozzle�Shop�Vac/Dust�Collector�Tool�KitThe durable 12' high density polyurethane hose extends your cleaning reach so you no longer have to “tug” your vac around by the hose and deal with the frustration of becoming entangled in extension cords or tipping over. Mr. Nozzle is designed to fit all standard shop vacs that accept a 21/4" OD fitting. With a 4" to 21/2" (21/4" ID) reducer (85U65) this kit is also adaptable to 4" dust collectors. Kit comes with a crevice attachment for cleaning small areas and tight corners, a claw attachment for wide area cleaning, and hose adapter for attaching both tools to the hose.125963� ....................................................... $39.99

EZ�Squeeze�Dust�Collection�Hose�ClampsThere is no easier way to connect dust collection hoses to fittings or machine ports than these EZ Squeeze Hose Clamps. Choose between Single-Loop (SL) and Double-Loop (DL) design in two sizes. The Single-Loop is easier to squeeze for temporary connections while the Double-Loop grips tighter on hose containing an internal wire. Two per pack. 5+149998� SL 21/2" EZ .................... $3.99�.... $3.59149999� DL 21/2" EZ ..................... $4.99�.... $4.49150000� (A) SL 4" EZ .................... $4.99�.... $4.49150001� (B) DL 4" EZ ..................... $5.99�.... $5.39

Need� more� dust� collection� hose? Choose from economical black GPE hose, standard clear PVC hose or heavy-duty clear polyurethane hose. Both clear hoses have internal wire.127761� 21/2" clear ..................................... $21.99147881� 21/2" x 10' HD clear hose ..............$29.99127760� 4" x 10' clear ................................. $31.99

AB

21/2"�Rigid�Flex�Dust�Source�SetCollect airborne sawdust and small wood chips at the source with the Rigid Flex Dust Source Set. Two different nozzles and hose end fittings convert the 21/2" flexible polypropylene plastic hose into a conve-nient system for collecting the fine dust produced by scroll saws, band saws and drill presses. 21/4" O.D. hose end fittings mate with most shop vacuum inlet ports. Includes one rectangular nozzle, one tapered nozzle, two hose end fittings and one 12" (expandable to 36") 21/2" rigid flex dust collection hose.150512 .......................................................$19.99

Clear�Dust�Collection�HoseEver wonder where that blockage is in your dust collection system? There’ll be no more guessing or needlessly pulling your system apart when you install this see-through hose. End your frustrations by upgrad-ing your system with our clear, flexible, kink free, wire reinforced hose. 10' lengths, 2 diameters.127761 21/2" diameter hose .................... $21.99127760 4" diameter hose ......................... $31.99

Wire�Hose�Clamps� Each 10+85U66 4" wire clamp (1) ......... $1.99 ....... $1.79�140606 21/2" wire clamp (1) ..... $1.99 ...... .$1.79

Dust�Collection�Rigid�Flex�HoseBend it, turn it, twist or pull it to collect airborne dust at the source. The hose can be compressed to 12" or extended to 36" all the while holding its shape. Come up with creative uses for it in the shop, especially on your bandsaw, scrollsaw, drill press or sander. Made of tough, rigid polypropylene plastic, for everyday shop use.149580 (A) 21/2" x 36" ................................$15.99149581 (B) 4" x 36" ....................................$19.99

A B

X-Treme�Tape�Duct�Hose�WrapDust collection systems inherently leak where clamps secure hoses to duct and fittings. X-Treme Tape Duct Hose Wrap seals those joints and repairs punctures in expensive dust collection hose. It’s better than ordinary duct tape because there is no adhesive; it simply sticks to itself, there is no residue after removal and it leaves joints and hoses clean and free of sawdust. 11/2" x 25 foot roll. Each 4+149888� �....................................$17.99.....$16.19

Dust Collection

Credit Card Orders: 800 225-1153 Free Technical Advice: 800 535-4486 www.woodcraft.com14

Floor�StandSuction�HeadPosi t ion th is adjustable Suction Head close to your router, drill press or lathe and pick-up all of the airborne dust! Head adjusts from 24" to 48", swivels 360° and has a 2" x 13" opening. Attaches to standard 4" hose (not included). Cast- iron base.812399 .........................$72.99

21/2"�Vac�&�Dust�Collection�AccessoriesDust collection sys-tem for bench top tools using your shop vac, or use the 4" to 21/2" reducer and outfit your 4" system with a 21/2" hose and accesso-ries. Union fitting is required to connect hoses together, or to other fittings.128680 21/2" x 14" floor tool ........................ $8.99128681 21/2" x 20" straight wand ................$7.99128682 21/2" x 14" crevice tool ................... $4.99128683 21/2" dusting brush..........................$7.99128685 21/2" hose end fitting ...................... $4.99144541 21/2" hose union fitting .................. $3.99144655 11/2" to 21/4" adaptor ...................... $4.99150758 21/4" union hose fitting .................. $2.99128689 21/2" x 10' hose with end fittings $15.99128690 21/2" x 25' shop vac hose ............$28.50128747 21/2" ABS blast gate ....................... $4.50144281 21/2" tee fitting ................................ $4.99144282 21/2" “y” fitting ................................. $3.99144770 21/2" hose hangers (5) ................... $1.99150757 21/2" flanged inlet fitting ................ $2.99

Shop�Vac�Hose�Kit contains one 10' hose with end fittings, two straight wands, 14" floor tool, dusting brush and crevice tool.128691� �Save�Over�$10! ......................... $42.99

ONEIDAAir�Systems�Dust�DeputyOneida’s Dust Deputy will trans-form your shop vacuum into an effective dust collection system. Extremely efficient, cyclonic pre-separator filters 99% of sanding dust with only 1% going into the vacuum; this extends the life of your shop vacuum and filters. Metal unit with 10-gallon steel drum has a cyclone constructed of heavy-gauge steel, assembled with continuous welded seams with 2" inlet & 2" outlet and one set of hose adapters for connecting a typical shop vacuum to the cyclone outlet. Molded plastic kit includes a molded poly cyclone separator with two 5-gallon plastic buckets, fitted lid and hardware to outfit a portable shop vacuum. Use the molded DIY poly Dust Deputy as a cyclone separator to make your own shop vacuum driven dust collection system. Note: The Dust Deputy is not for use with highly explosive dust.149161�(A) metal dust deputy kit ..............$199.99149951� molded plastic dust deputy kit ....$99.99149952� (B)�DIY plastic dust deputy ..........$59.99

�A

�B

Horsehair�Brushes�&�Giant�Dust�PanBrushesFeatures lac-quered hard-wood handles with horsehair br ist les. The standard style Bench� Brush has a bristle base of 21/2" x 9" with 21/2" long bristles. The Draftsman� Brush has a bristle base of 1/2" x 73/4" with 2" long bristles.

Aluminum�Dust�Pans. Our Giant�Dust�Pan is a huge 17" wide, enough to cover the full width of a standard push broom. The Standard�Pan is 12" wide. Both have sturdy riveted handles and are built to handle typical shop abuse.111152 bench (A) ......................................$10.99111151 draftsman (B) ................................. $7.9911S34 giant aluminum dust pan ...........$15.99144874 standard aluminum dust pan .....$10.99

B

A

Specifications: Motor ................................................110V Air Flow - 4" ................................450 CFM Static Pressure at 4" ................... 2.76 Hg Hose connections ......................... one, 4" Stage ............................................... single

1�HP�Portable�Dust�CollectorFor small shops, it won't take up valuable space. This unit comes pre-wired for 110V operation and features a standard 20 gallon nylon bag. Taiwan.129594� .................................................... $209.99129843 replacement bag ..........................$13.99129844 5 micron bag ................................ $27.50

Dust�Hood�With�StandCapture dust at the source and send it directly into your dust collection system. With an adjustable stand and articulat-ing head, you can easily position this hood at any machine in your shop. Sanding or power carving? Set it up right beside your work area for a dust free environment. The steel pedestal adjusts from 27" to 47" and locks in place. The hood is made of durable plastic with a 153/4" wide and 113/4" high opening and a 4" vacuum hose connection. 147113 ..................................$74.99

Dust�Collector�Remote�Control�SystemIt never fails, every time you need to start your dust col-lector you’re on the other side of the shop. Our remote control will give you the convenience of being able to turn on your dust collector from as far away as 50 feet. It even works through wal ls ! Simply press the “On”/”Off” button on the key fob and your dust collector responds accordingly. Installation is easy - plug the remote base unit into a power source, plug your dust collector into the base unit, and set the collector’s switch to “On”. The base unit includes a 6-foot cord and mounting tabs so it can be mounted to the wall. The key fob includes batteries and a quick-latch key chain to keep it handy. The 110V unit will operate dust collectors up to 11/2 HP, the 220V unit up to 3 HP.145475 110V remote ................................ $68.99145476 220V remote.................................$72.50146129� extra remote ................................ $21.99

iVac�Automated�Vacuum�SwitchThe Intelligent Vacuum Switch eliminates the distraction of turning on and off a dust collection system while you are operating potentially dangerous power tools. Compact and lightweight, it mounts to the wall for conve-nient clutter free use. Three modes of opera-tion: Auto – Off – On. Turn-On delay avoids the two power surges occurring at the same time. Turn-Off delay clears work area of remaining debris after tool has stopped. Two input power cords permit operation from two separately protected circuits when the combined load from tool and vacuum exceeds 15 Amps. Both power cords are individually protected with 12 Amp circuit break-ers. The iVac switch has been put through rigorous testing for ETL safety approval.149950 .......................................................$44.99

�


ONEIDA�Ultimate�Dust�Deputy�IICombine the Oneida Ultimate Dust Deputy II with the quality and per-formance of a Festool CT Dust Extraction System to create the ultimate three stage vacuum system. Kit Includes: Industrial Static Dissipative, 9 Gallon container, Dust bagger, plastic bag hold-down system, static dissipat-ing cyclone separator, 6 feet of static dissipating hose with static dissipat-ing cuffs, hose fittings and instruction manual.151175 .................................................... $249.99

Safety

Helping You Make Wood Work®� 15

Dust�Bee�GoneTM

The� Best� Nuisance�Dust� Mask! Made from woven polyes-ter with heavy 3/4" elastic straps with hook and loop clo-sure on the bottom and plastic quick release buckle on the top, this mask forms to all face shapes and even works with beards. Easy to breathe through and it’s hand washable. With proper care the Dust Bee Gone Mask can last for years. Three sizes include Medium (woman/small men, neck size 14-15), Large (most men, neck size 15-18), and XLarge (men’s neck size 18.5-26).141104 medium - blue edging ................. $43.99141152 large - maroon edging ................. $43.99141153 x-large - green edging .................. $43.99

FASTCAP®�MXV�Pocket�Dust�MasksEverything you want in an N95 rated, non-toxic dust/ particle mask. From the exhalation valve to the extra foam padding on your nose, this mask is built for comfort and performance. Each mask is individually sealed which makes them perfect for home, shop and travel in case you need to take one with you. Sold in boxes of 10.836875 .........................................................$17.99

POWER�MASK�Positive�Pressure�Dust�MaskProtect yourself from nuisance dust with this effective posi-tive pressure car-tridge mask that is not only comfortable, but quite affordable. The Power Mask is lightweight and because it is positive pressure doesn’t have to be pulled tight on your face. The small 2-speed fan built into the front of the mask pulls air through the filter, continously providing clean, cool air. The quiet motor runs on 4 AA batteries (not included) and has a handy belt clip, or the mask can be used as a non-powered respirator. Three dust cartridges and 10 pre-filters included.147633 powered respirator .....................$69.99147634 repl. dust cartridge ....................... $3.99147635 repl. pre-filters (10) ....................... $2.99

MSA�AM/FM�MP3�Hearing�Protector21dB NRR muffs with a built in AM/FM stereo radio and MP3 Jack and a bass boost switch. Listen to your favorite tunes or ball game while you work in the shop or the yard. Includes 2, AA batteries and an MP3 cord.150261 ..........$69.99�

MSA�Safety�EssentialsHalf�Mask�Respirators These respirators feature soft, comfortable, great fitting facepieces for superior comfort and protection, built-in exhalation valves, low profile replaceable cartridges for better vision, and come in recloseable packaging for easy and safe storage. The Toxic Dust Respirator traps over 99.97% of toxic dust including lead, asbes-tos, and Hantavirus. Meets the latest US government respirator standards (P100 Class) and OSHA and NIOSH requirements. The Multi-Purpose Respirator provides further protection from paint fumes, (except urethane paints), pesticides, lead fumes, ammonia, asbestos, and toxic dusts. Meets OSHA and NIOSH requirements. Cartridges are interchangeable between respirators.Toxic�Dust�Respirator141621 (A) ................................................$38.99141622 (B) repl. cartridges (2) .................$17.99

Multi-Purpose�Respirator141623 (C) ............................................... $49.99141624 (D) repl. cartridges (2) ............... $20.99

B C

D

A

JDS�1.5�HP�Dust�ForceThe Dust Force features a powerful 1.5HP 115/230V motor for 1,250 CFM of air but manages to operate at a quiet 77 dB. • Includes: 1 Micron upper filter bag along and standard 42 gallon clear plastic bag.• 4" plastic Y- fitting with cover, over a steel 6" inlet with integral grate to protect the impeller.• 76" H x 30" W x 36" LShip. wgt. 105 lbs., regular shippingplus $55 for excess weight.144912� ...............................$374.99

Shop-vac�Air�CleanerThe unit is 25" long and 13" in diameter and weighs only 15 pounds, to easilt fit where dust is being produced. The induction motor quietly moves 235 cfm of air to filter dust as small as 5 micronsand will filter 290 square feet every 10 minutes. Remove the end grill for filter maintenance of the included 2-stage filter system. The small size will fit between joists in a basement shop. Includes a 12' cord, and rocker switch. The replacement filter kit includes a foam sleeve secondary filter and cartridge filter.143300 .................................................. $119.99142211� replacement filter kit ..................$22.99

MSA�EXC�Hearing�ProtectorsEXC’s, rated at NRR 24, are the best muff style, passive hear-ing protectors in the MSA line. The unique injection molded inserts provide excellent noise attenuation and maximum comfort, while the patented adjustable headband ensures a good fit with no “hot spots”. It is this combination of perfor-mance and comfort that allows these muffs to stand alone. Certified to AS/NZS 1270.150947 ........................................................$29.99

FASTCAPMagnifying�Bifocal�Safety�GlassesRead small marks with ease with Fastcap’s Magnifying Bifocal Safety Glasses. When 64ths seem to merge together on your rule but your vision is otherwise near normal these bifocal magnifiers can improve accuracy dramatically. They provide uncorrected vision in the upper viewing field, and correction for presbyopia (lacking ability to focus on nearby objects) in the reading section. Designed by a cabinetmaker with adjustable frames, anti-fog coated lenses, and a range of bifocal powers, fit and comfort are assured. Feature shatterproof wrap-around lenses with UV protection and reinforced temples. ANSI rated Z87.1147866 (A) +1.5 diopter ..............................$7.99�147867 (B) +2.0 diopter ..............................$7.99147868 (C) +2.5 diopter ..............................$7.99147869 (D) +3.0 diopter ..............................$7.99

BC

D

A

JET�Air�Filtration�SystemModel�AFS-1000B�• 3-Stage Filtering - 1 micron• Remote Control & Timer• 3 speeds – 550,702 & 1,044 CFM• Disposable Outer Filter – Washable• Filters air 12 times an hour for a 20' x 20' x 8' shop815488 ...................................................$339.99818941� electrostatic filter �......................$54.99818943��charcoal filter�.............................. $57.99��

JET�1.5�HP�Dust�Collector�With�CanisterModel�DC-1100CK* • Motor 115/230V, 1.5HP, 1PH• 2-Micron Canister• 1,100 CFM of air flow and 8.9" of static pressure• Two 4" ports or one 6" port • Overall dimensions 37" x 20" x 79" Shipping wgt. 120 lbs., regular shipping rate plus $55 for excess weight.821769 D/S .............................................. $629.99

Safety


Five-Piece�Safety�KitMost power tools come with one or two pieces, but over time those pieces wear, and deteriorate. Our kit includes two pushblocks, two pushsticks and a featherboard of sturdy plastic, designed to last. These safety orange aids work well with table saws, router tables and jointers.143624 ........................................................$24.99

Adjustable�Face�ShieldA good face shield is only protection your face has against flying debris or tools. Most agree it’s only the first level for your eyes with the second be-ing a good pair of safety glasses. Our shield is ANSI approved with an 8" x 15" x .06" thick, high impact polycarbonate lens and a fully adjustable locking headpiece.150706 .................................................... $21.99152164 replacement visor ........................$9.99151051 black helmet sweatbands (2) .....$3.99

TREND�AirshieldThe Airshield is a bat-tery powered dust mask that provides excellent protection from the inhalation of harmful dust while at the same time protecting your eyes and face from fly-ing debris. Standard run time is 4 hours with the included battery, but because the Airshield has 2 battery compartments, a second battery can be installed that will permit up to 8 hours of continu-ous use. The Airshield comes complete with battery charger, THP/2 fine filter, pre-filter, airflow indicator, visor overlay and plastic carry bag. Airflow minimum 4.94 CFM, maximum 6.36 CFM. Weight is only 26 oz. Eye protection to BS EN 166:1995, low energy impact and respiratory protection to BS EN 146 THP2.145203 airshield .................................... $320.00145260 THP/2 filter ..................................$39.00147551 THP/2 filter (3 pack) ...................$79.00145261 pre-filter (3) ..................................$22.00145262 visor overlay (10) .........................$34.00145263 extra battery pack .......................$35.00

Bionic�Face�ShieldT h i s r e v o l u t i o n a r y design combines supe-rior protection and all-day comfort. Maximize your protection, vision, and comfort. This Face Shield provides extended top-of-head coverage, superior optics and full face visor, comfortable foam back pad, and built-in chin protection. The easy-to-set ratcheting headgear locks into place for a secure fit; headgear adjusts to your choice of 4 visor angles and 2 depth adjustments so it can be adjusted to be comfortably worn with most goggles and respira-tors. It’s lightweight and comfortable for extended wear, and visor replacement is quick, easy. The polycarbonate visor features both anti-scratch and anti-fog coatings. Meets ANSI Z87.1 and CSA Z94.3 standards.147814 ........................................................$54.99147815 replacement visor .........................$28.99

Anti-Vibration�XT�GlovesThese heavy duty vibration reduc-ing gloves feature 3.0 mm memory foam strategically placed through-out the palm and thumb along with a 360° wrist wrap. These gloves are built from a water and oil resis-tance synthetic base layer, then double-stitched with bonded nylon thread for extended life. Other features include a terry cloth thumb pad for wiping moisture and raised double knuckle protection. 151071 medium ..........................................$24.99151072 large ...............................................$24.99151073 X-large ..........................................$24.99

SafetyGate�ProfessionalIf you have ever forgotten to turn your power tool “off” following a power interruption you know how danger-ous it can be when power is reapplied. Patented sensor technology of the SafetyGate™ senses that your power tool is still “on” and will not allow the tool to be energized following recovery from a power interruption. Visually, SafetyGate warns you of this potentially dangerous situation with an illuminated yellow LED light, while the “gate” stops the flow of electricity, preventing a dangerous restart. When you are ready to begin working again, simply turn the tool “off” and then back “on” to release the gate and resume normal use. The SafetyGate can be applied to any power tool and in essence becomes the tool’s new plug. 151006 ........................................................$23.99

AB

C

Safety�Accessories��For�Table�Saws�And�JointersHeavy�Duty�Push�Sticks protect you and your blades cutting edges. 3/4" wide by 123/8" long, features two push notches for ease of use and extended life. Each 2+

127455 (A) ...................................$5.99.....$5.39

Push�Blocks keep hands and fingers safe from bal-des and cutter heads. 3" x 57/8" blocks have anti-slip bottoms to firmly hold your workpiece.111170 (B) set of 2 ......................................$8.99

16"�Push�Block provides positive two hand control for medium length (10" - 20") stock. Each 2+

111171 (C) ..................................... $9.99 ...$9.00

Safety�Set includes one push stick, two push blocks and one 16" push block.125416 complete set Save Over $5! ..... $19.75

Durable�Shop�ApronsLeather�Shop�Apron. Nothing stands up to abrasion and abuse in the shop like leather, and nothing looks and feels quite as good either! Our one-piece apron, weighing in at 24 oz., measures a full 22" wide and 34" long and is cut from premium side split gray leather. Kevlar® thread is used throughout so you’re assured the seams will never break and rivets are unnecessary. Adjustable cotton straps crisscross your back and a quick-release buckle at the waist is easy to operate.140937�(A)....................................................$29.99

Rugged�Blue�Denim�Workshop�Apron. Wrap- around design keeps loose clothing from getting caught in machinery and protects clothes from being soiled by finishing materials. Two pockets provide ample room for pencils, rules, and tape measures. 37" long.15L03 (B) .................................................... $17.99

BA

TREND��Airshield�PROIncludes�FREE�Trend�Airshield�Earmuffs,�A�$52Retail�Value!*Features twin f i l -t e r s w i t h 4 0 0 % more filtration area than the standard Airshield providing superior protection from the inhalation of harmful dust. The motor is posi-tioned away from the sensitive area of the forehead to reduce noise and irritation. The Ni-MH battery provides 8 hours of use and is located in the rear of the helmet for optimum balance and com-fort. Providing up to 7.06 CFM of filtered air flowing across your face keeps you feeling fresh and cool and prevents the visor from fogging. The Airshield PRO comes complete with battery, battery charger, airflow indicator, clear visor overlay, and plastic carry bag. Weighs just 2.21 lbs. Provides eye protection to ANSI Z87.1 and respiratory protection NPF50 to EN 12941 THP2. PRO clip on ear muffs for hearing protection rated at NRR 22. 152709*�Airshield PRO w/clip on muffs .............. A $451 Value, Save Over $90! $359.00149030� Airshield PRO ........................... $399.00149031� THP2 filters (2).............................$53.00149032� visor overlay (10) .........................$32.50149033 extra 8-hour battery ....................$70.00

Power Tool Accessories


Miter�Slot�FeatherboardTwo locking screws, not just one, hold this quick positioning featherboard securely in a standard 3/8" x 3/4" miter slot. The featherboard keeps stock tight against the fence with flexible “feathers”, helps prevent chatter while cutting and greatly reduces dangerous kickback. This unit is made of sturdy plas-tic, is 3/4" T x 43/4" W x 61/4" L and has 41/2" of travel.144518 .......................................................$10.50

Taper�JigAccurately cuts tapers up to 3" per foot or 15°. Includes a graduated scale measuring degrees and inches per foot of taper. Aluminum guide bars with 25/8" push handle.03R22 .......................................................$20.50

KREG�True-FLEX™ FeatherboardThe True-FLEX™ Feather Board gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in imperfect cuts and less than safe operation. Each finger of the True-FLEX featherboard is designed to provide a consistent and optimum pressure. The featherboard is made from an extremely durable plastic composite body and includes an exclusive wedge-lock system. Whether you’re using a miter-slot or a T-slot, work-ing on a table saw or a router table, the wedge-lock system adjusts accordingly and lets you work with confidence. Available as a single featherboard or a special value twin-pack.148436 single featherboard......................$19.99839194 twin-pack featherboards..............$36.99

Advanced�Micro�Jig�GRR-Ripper�SystemThe critically acclaimed precision GRR-Ripper pusher system will forever change operating a table saw. Gain confidence to make ultra-thin cuts with surgical precision and control to make the exact cut you want. GR200 includes main body, handle, 1/4" side leg, 1/2" side leg, center leg, adjustable spacer, stabilizing accessory plate, balance support and comprehensive user’s manual. Add the 1/8" Side�Leg�Accessory to your GRR-Ripper and cut strips as thin as 1/8".The Handle� Bridge� Set eliminates need for handle adjustments while providing better

control by spreading downward pressure over the whole width of the Gripper body. The Deflector/Connector keeps

flying wood chips at bay or acts as an extended blade guard for the Gripper. This accessory can con-nect two Grippers together when working larger stock. Deflector/Connector requires Handle Bridge

to be installed. 820434��Model GR200 ................$79.99

845406 1/8" side leg accessory .................$13.99146915 handle bridge set .........................$13.99150753� deflector/connector ..................... $11.99

MILESCRAFT�Power�Tool�Safety�AccessoriesThese accessories from Milescraft make operating your table saw, band saw, jointer, or table mounted router a less dangerous and more efficient. The BladeChanger™ is open sided and holds standard 10” diameter blades, 8" dados and 71/4" circular saw blades while you install or remove the arbor nut. The PushStick™ is a simple device that is enhanced by a cradle with integral magnets and on-board depth gauge. 148418 (A) BladeChanger™ ......................$15.99148419 (B) PushStick™ .............................$18.50

Each FeatherBoard™ includes hardware for use in 1/4" T-track, 3/4" miter slot or 5/8" miter slot. The D/T FeatherBoard™ includes two feather components and a spacer with hardware to use the featherboards in tandem, plus two 3/4" expansion bars, two 5/8" expansion bars and four T-slot bolts for single use. Each 2+148420 (C) FeatherBoard™ ..... $20.99�.... $18.89148421 (D) D/T FeatherBoard™ $33.99��..$30.59

A

B

C

D

Deluxe�Wooden�Featherboard�Prevents chatter and dangerous kick-back. Locks into standard miter slots with a twist of the knob. 41/2" adjustment slot, 9/16" T x 13/4" W x 10" L.125417 ...................................................... $11.99128401 repl. wooden fingers .......................$7.99

Magswitch�Magnetic�FeatherboardsUnlike conven-tional feather-boards, which are tied into the miter slot, M a g s w i t c h featherboards can be placed anywhere on a steel table or fence sur-face. The easy on/off knob makes them convenient to use. Pro models have the stron-ger hold with two 30mm rare earth magnets. The Pro Table Magnetic Featherboard stays in position while the fingers press firmly against the material. The Pro Table model can be fit with the optional vertical attachment (sold separately) which accom-modates stock up to 21/2" thick. Pro Fence Magnetic Featherboard provides downward pressure on your jointer table as well as steel fences used on router tables, shaper tables and table saws. Universal Magnetic Featherboard with two 20mm rare earth magnets is perfect for infeed/outfeed applications. The Universal model is suitable for use on table saws, jointers, shapers and band saws. Pro Model Vertical Attachment can be installed on the Pro Table model as a vertical hold-down or stacked for tandem use. Adjusts vertically and horizontally and includes one set of risers, 90° arms and hardware. Vertical Attachment Risers include two sets of risers and necessary hardware for stacking featherboards.147527�� (A) Pro Table Mag. featherboard $59.99147979�� (B) Pro Fence Mag. featherboard $59.99148442� (C) Universal Mag. featherboard $59.99149497� (D) Pro Model vertical att. ............$16.99149498� (E) vertical attachment risers ........ $8.99

A

B C

D

E

KREG�Multi-Purpose�Push�StickThe Multi-Purpose Push Stick from Kreg includes added features that make each cut safer and more convenient than ever before. The push stick is molded of light-weight yet durable resin with an ergonomic handle that places the hand in proper position for control and safety. Included in the push stick is a removable, locking depth gauge that makes measurements easy and precise. The built-in storage magnet lets you store it anywhere and even has built-in pencil holder!148974 ........................................................$17.99



WIXEY�Digital�Angle�GaugeJust set the Wixey Digital Angle Gauge on your table saw top close to the blade, push the zero button, then attach it to your blade with the built-in magnets. Sim-ply adjust your blade until the desired angle appears on the easy-to-read digital display. Display is in 0.1° increments. When close doesn’t count, count on the Wixey Digital Angle Gauge to give you accurate angle settings every time.147281 .......................................................$39.99

ONEWAY�Multi�GaugeThe solid 11/4" thick cast iron frame is preci-sion machined at 90° on three sides so you can check square-ness of, or accu-rately position, joiner fences, saw blades or tilting tables of scroll saws and drill presses. The dial indicator has 11/32" of travel for a full 1" measurement in .001” increments. Dial indicator includes a round tip for checking run out and flat tip for saw blade, dado head, or router bit height adjustments. Additional applications include depth of cut measurements, planer/drum sander feed roller checks, and drill bit diameter measurements. This multi purpose tool revolutionizes dial indicator usage in the work shop.126979 ......................................................$94.99

WIXEY�Digital�Height�Gauge�With�FractionsUsing a rule, or fumbling with set up blocks is no longer necessary for accurate set-up of router bit or table saw blade height. The 11/2" x 4" base features a magnetic strip to hold the gauge in position. A large digital readout displays cutter height for exact depth settings. The shape of the anvil allows you to use the gauge to set router fence position up to 41/2". Displays both fractions and the decimal equivalent at the same time so you know your fraction is exactly on, not rounded up or down like other fraction read outs. Accurate to +/- .001", 1/500", or .025mm.148380� .......................................................$59.99

BEALL�Tilt�Box�Digital�Angle�GaugeThe Tilt Box is a digital inclinometer that will read relative angles to an accuracy of +/- 0.1°. Turn it on, place it on your saw table and press the “Zero” but-ton once to establish relative zero. Attach the Tilt Box to your blade using the rare earth magnets on its sides and it will register the relative angle between the blade and the table via a large, easy to read display. As a bonus, if you press the “Zero” button again, the Tilt Box will also measure absolute zero. This means that you can also utilize it as a portable pocket level. The Tilt Box is powered by a 9 volt battery. Includes battery and detailed instructions.840837 .......................................................$40.99

PINNACLE�®�Saw�GaugeGetting accurate, repeatable results with a miter gauge can be difficult when the blade alignment is off. The Pin-nacle® Saw Gauge is designed to satisfy this need. It’s the first alignment tool that automatically adjusts to the width of the miter slot through the use of three precision ground steel pins. Regardless whether the slot is 5/8" wide like many older saws, 3/4" wide like most current models this unique arrangement will ensure a perfect fit and smooth traveling up and down the miter slot. Another exclusive feature is its ability to be set at one distance to align the blade then in an instant be reset to a different distance for checking the fence and back to the exact original location for comparison measurements. No knobs, no tools, no recalibration. Comes in a fitted MDF case for safe storage. Made in the USA except for the dial indicator which is imported.149019 .......................................................$80.50

WIXEY�Digital�Planer�Height�GaugeNow you canstop constantly using calipers to check stock thickness! This unique gauge reads out both decimal and fractional measurements. Mount the Digital Planer Height Gauge and simply lower your planer until the gauge reads .562" - 9/16". It can’t get any easier! Fits most portable “lunch box” style planers with easy to follow installation instructions.146096 ....................$65.99

Dial�Indicator�With�Magnetic�BaseWith a flip of a switch its magnetic base locks itself in place. The “spring” extension arm of the base can then be adjusted to position the indicator tip precisely for measuring within .001". Choose between 0 - 1/2" or 0 - 1" dial indicators. Indicators and base are also available individually.128399 0 - 1/2" indicator w/ mag. base ....$39.99128400 0 - 1" indicator w/ mag. base ......$39.99128396 0 - 1/2" dial indicator only .............$20.50128397 0 - 1" dial indicator only .............. $21.99128398 magnetic base only ..................... $21.99

KREG�Precision�Measuring�System(A)� Solid� Production� Stop with dual cursors for reading from either side of the blade. It drops onto the top of the fence for easy removal, making this perfect for repetitive, high-production tasks.

(B)�Flip�Stop has a curved front design that lifts out of the way to bypass the stop for squaring an end or cutting to length without moving the stop.

(C)�Perfect�Miter�Attachment will attach to either stop and references a 45° mitered board on two surfaces.

(D,�E)�Top�and�Heavy-Duty�Traks. The Top Trak (D) is a rugged anodized aluminum extrusion that can be used to create a precision measuring system for your mitersaw, drill press, table saw and more. It features a self-aligning L-shaped mounting foot for easy attachment to a shop-made 3/4" thick fence. The Heavy-Duty Trak (E) is an L-shaped, anodized aluminum extrusion that is extremely straight and perfect for heavy-use applications. It has four T-slots which accept 1/4" hex bolts.

(F)�Jig�and�Fixture�Bar is 30" long and has six plugs that adjust to take up any play in your miter gauge slot. Mounting holes every 4".

(G)� Mini� T-Trak in three lengths to produce countless types of woodshop jigs and fixtures. This track is 3/8" tall x 3/4" wides and accepts any 1/4" hex bolt. 4' nonstick measuring tape can be added to inner track.

(H)�Trak�Clamp hold-down clamp.

Miter� Combo� Track� (not� shown)�Combination� 3/4" x 3/8" miter track & 1/4" T-track works with your miter gauge, featherboards, and other ac-cessories to help add tremendous flexibility to your custom jig or fixture.

Precision�Micro�Adjuster��(not�shown)��Adds fine tuning to your swing stop when used with Top Trak or HD Trak.

� � � 146053 ................................$14.99145823� (A) production stop .......................$19.99145822� (B) swing stop ...............................$29.99145824� (C) perfect miter attachment .......$21.99145826� (D) top trak, 2' ...............................$23.99145827� top trak, 4' ....................................$34.99145828� (E) heavy duty trak, 2' ..................$39.99145829� heavy duty trak, 4' ........................$59.99145830 (F) jig and fixture bar ....................$23.99149081� (G) t-trak, 24" ............................... $11.99149082� (G) t-trak, 36" ................................$14.99149083� (G) t-trak, 48" ................................$18.99145831� (H) trak clamp ................................. $4.99145832� R-L self-adhesive tape, 12' ............ $9.50147942� R-L self-adhesive tape, 3.5 meter . $9.50145833 L-R self-adhesive tape, 12'............. $9.50147943� L-R self-adhesive tape, 3.5 meter . $9.50145834� non-stick measure tape, 4' ............ $4.99149095� miter combo trak, 32" ..................$29.99149096� miter combo trak, 48" ..................$39.99

Kreg�Precision�Measuring�Systems�Kit contains four 2’ pieces of Top Trak, two 12’ self adhesive tapes (L-R and R-L), one Flipstop and one Production Stop.146487� �......................�Save Over $24! $139.99

C

F

H

A E D

G

B



INCRA�Miter�GaugesAll feature GlideLOCK Miter Bars that adjust to precisely fit standard 3/8" x 3/4" miter gauge slots.

(A)�INCRA�Miter�Gauge�V27. The V27 is engineered to provide a high performance, yet low cost upgrade to your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better Miter Gauge. Like all Incra Miter Gauges, the V27 delivers extreme miter cutting accuracy through the advanced combination of Incra’s exclusive AngleLOCKTM index-ing system and its patented Adjustable GlideLOCKTM Miter Bar. 27 Precision V-Stops are laser-cut in solid steel to lock-in angles at exact 5° steps over a full 120° range, with special stops at plus & minus 22.5°. The V27’s vertical work support surface doubles as a Universal Mounting Bracket that makes it easy to add just about any fence if you ever need one. 144644 .......................................................$64.99

A B

(B)� Miter� Gauge� 1000SE.�Special Edition adds a stain-less steel Vernier cursor for an incredible 1/10th degree resolution between fixed steps. The Special Edition also includes a miter fence that telescopes from 18" to a full 30" in length with the new INCRA Flip Shop Stop™ for patented Automatic Positioning Control™. The saw tooth rack system instantly controls the length of your cut with INCRA’s legendary machine shop accuracy as the dual “Flip” arms provide flexibility. The Flip Shop Stop™ is equipped with three sliding stop rods that operate independently or in tandem for one, two, or three simultaneous stop positioner setups.143842� ................................................... $159.99

C

INCRA�Miter�ExpressIf you own a miter gauge you can turn it into a miter sled in just a few seconds by simply docking it in place on top of this unique sled. This sled is a sliding, miter-cutting platform that fully supports and controls your workpiece throughout the cut for improved accuracy. The Miter Express is designed to let you instantly drop and lock your miter gauge into the sliding platform. Once docked, it stays put until you undock it to switch back to your regular miter gauge. The sled features a built in miter bar that is adjustable for zero side play tracking. Other features include two embedded T-tracks to secure the included hold down clamp to anchor your work-piece, a locking drop panel that supports the offcut, and also provides zero clearance tear out control.146488 .................................................... $159.99

Special�Incra�Combo�PackageBuy an Incra Miter Gauge 1000SE and Incra Miter Express and Save!147374 Best Value Save $24.99! ..$294.99

INCRA�MITER�V120™�Miter�GaugeThe Miter V120 is equally at home on the table saw, band saw, router table, even the disk or belt sander. Constructed of machined and laser-cut steel com-ponents the miter gauge features 120 AngleLOCK™ indexing stops including 1-degree stop spacing with special stops at ±221/2°. 149499 .......................................................$84.99

WoodRiver®

Guide�Rail�SystemThis system will allow you to place a tool guide for ripping, cross-cutting or routing at an acute angle on any size panel. The base component 56"�Guide�Rail features the same heavy-duty aluminum extrusion used in the WoodRiver�Clamp�Guides with integral 1/4" T-tracks and 21/8" x 1/2" profile. The Guide�Rail�Connector locks together multiple guide rails to form a continuous guide for your circular saw or router across any length material. Pairs of clamps are sold separately to secure the guide rail at each end. These clamps swivel about the “T” shaped anchor and can be placed at any position along the underside of the guide rail extrusion. The unique�Angle�Jig acts like a miter gauge but instead of feeding the stock across the blade or bit, the jig connects to the guide rail to reference from the edge at any angle between ±60° with positive stops at 90°, ±30°, ±45° and ±60°. The 4® x 8® sheet guide rail kit contains (2) 56" guide rails, (1) guide rail connector and (1) pair of clamps to create the perfect guide rail system for ripping and cross-cutting 4' x 8'® sheet goods.150002� (A) 56" guide rail component ..... $21.99150003� (B) guide rail connector ...............$16.99150004�(C) pair of guide rail clamps ........$26.99150005� (D) angle jig for guide rail system $35.99150006�(E) 4 x 8 sheet guide rail kit .................... .................................... SAVE�$10��$77.95149196� Univ. base for routers & saws ....$29.99844954� Freud 71/4" x 60T blade ................$49.99

A

BC

E

D

KREG�Miter�Gauge�SystemFactory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10 of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. Lastly your work piece is supported by a heavy duty 24" aluminum fence with an adjustable Flip-Stop. Includes a self-adhesive measuring tape.145765 .................................................... $139.99145822 extra swing stop ...........................$29.99146053 precision micro adjuster .............$14.99

INCRA�MITER�1000HD™ Miter�GaugeThe HD stands for High Definition, because the protractor plate’s exclu-sive AngleLOCK Indexing System has 180 angle stops in 1° increments with special stops located at 221/2°, telescoping IncraLOCK cut-off fence & Flip Shop Stop, steel vernier scale that reads to 1/10°, and you will improve the quality of any project. The Miter 1000HD will allow you to precisely set and quickly duplicate any segmented turning angle you might need to cut, whether it’s 18° for 10 sides, 25.7° for 7 sides, or anything else imaginable.149714 .................................................... $189.99



MAGSWITCH�MagJig�Universal�Base�SystemMagswitch technology is revolutionizing woodwork-ing, giving you unmatched ability to hold your work on any steel or cast-iron table. The innovative MagJig Universal Base System is a modular design that combines new and existing components to create unique jigs for holding workpieces for safer, more precise operations. Future Magswitch prod-ucts will be designed around this versatile platform.

The� MagJig� Dual� Roller� Fence mounts to the MagJig Universal Base (sold separately) to create the ulti-mate “third-hand” when you are doing the most difficult and dangerous work. It helps supports a tall panel, hold down a long piece of wood or steady your resaw projects. Includes two sets of precision sealed roller bearings for smooth, non-marring flow of material.

MagJig�Resaw�Fence mounts to the MagJig Universal Base (sold separately) to form the smoothest resaw guide you will ever use. Angled faces al-low for blade drift and make a perfect infeed or outfeed work support.

The MagJig�Universal�Base is the keystone of the system and uses two MagJigs (sold separately) to hold the base in place on steel or cast-iron work surfaces. Includes adapters for the use of either 20mm or 30mm MagJigs. The Universal Base is expandable for use with future Magswitch products.

Pro�Model�Vertical�Attachment is really three tools in one! It can be installed on the MagJig Universal Base and used as a vertical hold-down or conventional featherboard. It can also be installed on the Pro Model Featherboard as a vertical hold-down or stacked for tandem use. Includes two sets of risers, 90° arms and hardware.

Vertical� Attachment� Risers include two sets of risers and necessary hardware for stack-ing featherboards.149494� MagJig dual roller fence, only ....$24.99149495� MagJig resaw fence, only ...........$22.99149496� MagJig Universal Base, only .......$18.99149497� Pro Model vertical attach. ..........$16.99149498� vertical attachment risers ............ $8.99147832�� MagJig 95 .............................$19.99147833� MagJig 150 .............................$29.99

KREG�Multi-Purpose�Router�Table�Switch�SwitchThe Kreg Multi-Purpose Router Table Switch adds safety and convenience to your router table. Mounts easily to both Kreg stands. Two female outlets for router and dust collection use. Large On-Off lockable paddle switch. 125volt, 15 amp, 8' long 14-gauge power cord.149970� �..................................$34.99

Accessory�Power�SwitchTh is i s an economica l 15-amp switch, designed for use with scroll saws, sanders, lathes, router tables, or any bench-top tool application. The switch includes a 51/2' grounded cord with a 3-pin end and a 3-pin receptacle above the switch. A large paddle switch with remov-able child protective lock is easy to locate and turn the tool off. The housing is constructed from high impact plastic and the switch’s rear plate is made of heavy gauge steel with mount-ing tabs at the top and bottom.145199 .......................................................$25.99

MAGSWITCH�Mag-SquaresImagine a strong clamp that “turns on” in an instant, won't damage the wood surface and mounts anywhere on your steel table surfaces….well, it's a reality with the Magswitch Mag-Square. Simply twist knob on or off to apply or release super strong magnetic grip of 155 lbs. The pre-tapped mount holes on all 4 sides allow for mounting tools or jig fixtures using #10 - 32 on the 30mm model. An added bonus is the Mag-Square’s 90° corners which can be used for squaring operations. Mag-Squares offer flexibility in quick connect, disconnect, strong hold, squaring, precise positioning and mounting versatility.147936� (A) 30mm .......................................... $42.50147937 (B) 50mm ........................................ $109.99

A

B

MAGSWITCH�Mag-JigsWith Magswitch you have the flex-ibility of mounting a jig anywhere on a steel work surface. Each Mag-Jig is constructed to fit perfectly in a 3/4" board so that the bottom of the magnet is flush to the table surface. Simply de-termine a mounting hole location in your jig fixture that ensures complete contact between the Mag-Jig and the steel table surface, drill a 30mm or 11/4" hole for each 20mm Mag-Jig using a forstner bit (40mm or 15/8" hole for 30mm Mag-Jig) and drop the Mag-Jig in the hole. Using your jig fixture couldn’t be any simpler: place the Mag-Jig against the work surface and turn the knob 185° in a clockwise direction to engage the Magswitch; when you’re finished, turn the knob in a counter clockwise direction to disengage. Two or more Mag-Jigs per fixture are recommended.147832 Mag-Jig, 20mm ............................. $27.99147833 Mag-Jig, 30mm .............................$35.99125937 11/4" Forstner bit..............................$7.99125940 15/8" Forstner bit ............................ $9.99147997� 30mm Forstner bit ......................... $6.99147998 40mm Forstner bit ......................... $9.99

i-Socket�Vacuum�AutomatorHave your shop vac start up and shut down automatically every time you turn your sander on or off with the i-Socket Vacuum Automator. Simply plug your router, sander or other handheld power tool into one socket and your shop vac into the other. Starting your power tool will automatically turn on your shop vac, and it will continue to run for approximately 7 seconds after you stop to clear out final dust and chips from the hose. A simple, economical solution that increases efficiency.147369 ......................................................$34.99

Momentary�On/Off�Deadman’s�SwitchPerfect for any scroll-saw! This momen-tary switch provides quick, controllable starts and stops. Keeping both hands on the work allows you to be in complete control and work more safely while sawing. Just press the switch with your foot for “on” and lift your foot for “off”.147876 .......................................................$20.99

Foot�Switch�-�On/OffTurn tools on and off while performing tasks that require both hands. Just plug your tool into the footswitch and use its generous 7' cord to locate the switch in a convenient position. Great for scroll saws, power carving tools and other 115 Volt tools up to 15 amps. Features large 31/2" x 61/4" pedal for easy use.145968 .......................................................$23.99



LEECRAFT�Table�Saw�Throat�InsertsSimply raise your saw blade through the insert to create a “kerf” which precisely matches the blade on your saw. These 1/2" thick inserts are pre-cision machined from a nearly frictionless melamine faced, high density phenolic laminate and offer durability and flatness not found in cheaper plastic inserts. Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen! Sheet stock material (1/2" x 11" x 15") is perfect for creat-ing your own custom jigs and fixtures. Craftsman insert measures 14" x 33/4" and fits most new, 10" belt drive models. (Check the opening of your Sears saw before ordering). The Powermatic 2000 Blade Insert has a slot for the riving knife. Complete with instructions. Insert surface colors may vary. Each 2+ Each142759� Delta Left & right tilt ... $24.99 ...$22.49152582� Delta Unisaw dado ...... $39.99 .. $35.99152649� DeltaUnisaw blade ...... $36.99 ...$33.29142760� Jet right tilt & Powermatic 64�.................. ...................................... $24.99 ...$22.49142271� Jet left tilt ..................... $24.99 ...$22.49142021� Powermatic 66 ............ $24.99�...$22.49142022� DeWalt DW744 & 746 ............................... �� .......................................$24.99 ...$22.49124214� Craftsman .................... $24.99 ...$22.49832209� Craftsman vintage ....... $26.99 ...$24.29152650� Craftsman older .......... $25.99 ...$23.39147751� PM 2000 blade�............$34.99 ...$31.49147752� PM 2000 dado ..............$34.99�...$31.49832211� General 350 and 650�..$24.99 ...$22.49832212� General Int'l 50-220, Jet Workshop Saw 708100, JPS-10 Pro-Shop Saw 708482, 708483, 708480K�......................................$24.99 ...$22.49832213� Gen. Int'l contractor�.....$24.99 ...$22.49150665� Hitachi zero clearance $24.99 ...$22.49149010� Jet Deluxe Exacta ........ $29.99 ...$26.99149011� Jet Dlxe. Exacta Dado $29.99 ...$26.99832215� Ridgid TS3650 ............. $24.99 ...$22.49152583� Ridgid TS2400-1.......... $23.99 .. $21.59152584� Ridgid R4510 ............... $23.99 .. $21.59149416� Steel City 35900 ......... $29.99 ...$26.99149417� Steel City 35900 Dado $29.99 ...$26.99123033� sheet stock .................. $24.99 ...$22.49

Use With Dados Too!

Power�Twist�Link�BeltReduce vibration in any of your belt driven machines with the Power Twist Link Belt! Common V-belts develop a “memory” and retain their non-operating shape causing annoying and unnecessary machine vibration. However, these specially engineered link belts do not develop a “memory”, but retain their flexibility for smooth operation. Link Belt is 1/2" wide, easily adjustable and available either by the foot or in a prepackaged 4' length. Includes instructions for use.25N67 link belt .............................per foot $8.99145530 4' length ........................................$32.99

Tenoning�JigCut perfect straight, angled, or mitered tenons on your table saw safely and easily! Oversized feed handles provide positive, safe operating control while the large crank style handle quickly secures stock up to 31/4". A 0° to 45°adjustable backstop supports stock for angular cuts. Its fine adjustment feature guarantees accurate, repeatable cuts. Features built-in provisions for adjustment and alignment to maintain cutting accuracy. Machined cast iron body parts. Fits any table saw with a 3/4" x 3/8" miter groove.150784 .......................................................$89.99

WOODSMITH�Aluminum�Box�Joint�Jig�at taches to y o u r m i t e r gauge to make precision box or "finger" joints. Sure, you can make home-made box joint jigs for your table saw or router table, but after you use them for just a short time the inaccuracies of the jig really show through with inac-curacies in the joint itself, and with fixed jigs there is no adjustability. This jig gives you the accuracy and adjustability to make perfect fitting box joints every time you use it. A micro adjustment feature allows you to move in increments of less than 1/64" for perfect fitting joints. “Chip out” is controlled by a replaceable plastic backing strip. Your stock rests on a bed in front of the jig to ensure safe and true cutting of the individual fingers. Finger width is ad-justable from 1/4" to 13/16" in thickness. Constructed of a solid heavily ribbed aluminum extrusion, this jig provides unbelievable stability for repetitive cutting on both the table saw and on the router table. Jig measures 17" x 41/2". Includes detailed instructions and FREE DVD.111202 .....................................................$104.99

Micro�Jig�MJ�Splitter™This is a low profile split-ter that also serves as a mini feather board for the keeper piece behind the saw blade. Designed to be installed on a zero clearance insert (not included), the MJ Splitter features fool proof installation and a revolutionary concept that provides for alignment surfaces of different thicknesses. The standard MJ Splitter is made out of unbreakable polycarbonate to create the feather board effect when desired. The MJ Splitter SteelPRO is designed to withstand the severe table saw use of a professional woodworking shop. Whether you’re working with heavy panels or dense solid wood, the SteelPRO will give you the strength to cut them with confidence and, most important, safely. Includes two splitters to achieve four offsets to the blade, installation jig, drill bit and detailed instructions.145612 1/8" kerf standard splitter kit .......$15.99146178� thin kerf standard splitter kit ......$22.99845404 1/8" kerf SteelPRO splitter kit .......$34.99845405 thin kerf SteelPRO splitter kit ......$34.99

Grip-Tite�Sub-Fence�ClampNo one wants to ruin the face of their expensive table saw fence with a dado blade. But the trouble with sacrificial fences is the clamps get in the way when making the cut. The “hole clamp” from Mesa Vista Design will allow you to easily clamp a sub-fence of any material to your power tool guide fence without interference. Great for rabbeting with dado blades, adding a high sub-fence for vertical support or attaching a steel plate for Grip-Tite magnetic hold downs. There is no drilling into the fence face, only two vertical 7/16" holes in your scrap material, slide the post of the clamp into the hole and tighten on your fence! Two clamps included.148872 .......................................................$24.99

Anti-Kickback�Safety�RollersEach set of Anti-Kickback Safety Rollers comes complete and ready to install on your fence or fixture. Yellow rollers rotate in a clock-wise direction and will not rotate counter-clockwise preventing kickback on table saw and router tables. Green rollers rotate in either direction so they are great for shapers where they act as a hold-down, not an anti-kickback device. Rather than permanently mounting them to your machinery, the 24" track allows you to move the rollers from one machine to another.146836 yellow - clockwise .........................$45.99146837 green - bi-directional ....................$45.99146838 24" track .......................................$21.99

10"�Table�Saw�Sanding�DiskTurn your table saw into a precision sand-ing station! By using your miter gauge you can quickly sand and square ends. Tilt your arbor and sand an-gled edges exactly. 10" machined disk has a 5/8" arbor hole. The sanding disks are cloth backed, resin bond, aluminum oxide with pressure sensitive adhesive and 3" center hole.129272 10" sanding disk ...........................$18.99146751 40 grit disk (1) ................................$4.99146752 60 grit disk (1) ................................ $4.99146753 80 grit disk (1) ................................ $4.99146754 120 grit disk (1) .............................. $4.99



T-Track�AccessoriesThese T-Track accessories will complement any 1/4" T-Track that accepts standard 1/4" bolt heads.

12-Piece�Plastic�Knob�Kit�includes 4 each: 3" all-thread 1/4" bolts and matching large plastic knobs and steel washers. 147918� (A) .................................................... $6.99

16-Piece�Knurled�Thumb�Nut�Kit�features knurled thumb nuts and�includes 4 each: 3" all-thread 1/4" bolts and matching steel knurled thumb nuts, steel washers, and nylon spacers.147919 ......................................................... $6.991/2"� Track� Stop� Kit includes a pair of anodized aluminum “L”-shaped stops that extend 1/2" below the anchoring point and the necessary hardware to interface with any 1/4" T-Track.147920 (B) .................................................... $6.99

Oval�Nut�10�Pack include either #10-32 or 1/4-20 oval nuts that are 7/16" wide (like a 1/4" bolt head), but unlike a conventional nut the thinner oval nut will slide easily in low-profile 1/4" T-Track.147921�� (C)�#10-32,�10pcs.�.......................... $3.99147922� (C) 1/4-20, 10 pcs. ........................... $3.99

Deluxe� Hold-Down� Clamp.� Better than normal hold-down clamps, this version has rubber tipped ends to increase grip on both surfaces and reduce denting of your work piece. A pivot cross-dowel ensures the clamp bolt is always perpendicular to the work surface. Includes a 3" long 1/4" hex head bolt, washer and knob.142603� (D) .................................................... $8.99

Deluxe�Flip�Stop.�This versatile stop� can be set both to the left and the right. Each Flip Stop is machined to a tolerance of .001 of 1" so that, ganged together, you can quickly and accurately index your cuts or holes at perfect, 1" intervals. Great for use on drill press tables, hollow chisel mortisers or as a light duty chop saw fence. Sold in pairs.148379 (E) ..................................................$24.99

TrackLOCK is designed to interlock with INCRA T-Track Plus by overlapping a separate 1/4" T-Track or another piece of T-Track Plus. With a quarter turn of the cam lever, the upper T-Track Plus is released allowing free movement perpendicular to the bottom track. A brass knob secures the TrackLOCK from parallel movement in the lower track. Sold in pairs.147924 (F) ..................................................$24.99

A

CE

B

F

D

INCRA�T-Track�And�T-Track�Plus�Add accuracy and precision to your jigs and fixtures with T-Track and T-Track Plus from Incra. These tracks are designed with a host of enhancements. Like other tracks, the extruded anodized aluminum construc-tion is designed to house a 1/4"-20 bolt head, but that’s where the similarity ends. First, these tracks feature a “well” in the extrusion allowing the track to be mounted using the included #8 pan head screws versus #6 flat head screws used by other tracks. The extra depth of the “well” allows the use of 1/4"-20 nuts that are not accommodated by other tracks. On the T-Track Plus there is the addition of a highly accurate Lexan scale that can be moved to a “zero” reference. The T-Track is sized for a 3/4" wide opening, the T-Track Plus fits a 11/4" wide opening.142803 (A) 18" t-track ................................. $8.99142804 (A) 24" t-track ...............................$10.99142805 (A) 36" t-track ............................... $13.99142806 (A) 48" t-track ...............................$17.99142580 (B) 18" t-track plus ......................$10.99142581 (B) 24" t-track plus ......................$12.99142582 (B) 36" t-track plus ......................$15.99143218 (B) 48" t-track plus ......................$20.99

AB

D

B CE

AT-Style�Knobs, phenolic, with insert. Each 4 +85J95 (A) 1/4"-20 $1.19 ....$1.07142226 (A) 5/16"-18 . $1.19 ....$1.07142227 (A) 3/8"-16 .. $1.19 ....$1.07

T-Style�Knob�with 2" stud.27R16 (B) 1/4"-20 . $1.99 ....$1.79

Wing�Knobs replace metal wing nuts and allow incredible torque. Phenolic 3" diam., with a 3/8"-16 insert.85J94 (C) .............. $1.99 ....$1.79

Ball�Knob, great for low profile jigs.13/4" diameter with a 3/8"-16 insert. 27R17 (D) ...............$2.49 ... $2.24

Tapered�Handle is easy to grip. 33/4" high, 1" diam. with 3/8"-16 x 3/4" stud.27R18 (E) ...............$2.49 ... $2.24

Miniature�Knob. Nylon 3/4" dia. x 9/16" knob with 1/2" long 10-24 steel stud. 27R11 (F) pair ....... $1.50 ... $1.35

Four�Arm�Knob with brass insert is easy to grasp for sure tightening in awkward positions. Phenolic 2" dia. x 1" height. Each 4+27R14 (G) 1/4"-20 .. $2.50 ... $2.25142228 (G) 5/16"-18 $2.99 ... $2.69142229 (G) 3/8"-16 $2.99 ... $2.69

Each 4 +Four�Arm�Knob with 11/2" stud.27R15 (G) 1/4"-20 .. $2.50 ... $2.25142906 (G) 5/16"-18 $2.50 ... $2.25142907 (G) 3/8"-16 .. $2.50 ... $2.25

Four�Arm�Knob with through hole.142230 (G) 1/4"-20 $1.99 ....$1.75142231 (G) 5/16"-18 $1.99 ...$1.75142232 (G) 3/8"-16 $1.99 ...$1.75

Five� Star� Knob with through hole. Versatile ABS polypropylene 21/4" dia. knob with “through” steel insert allows it to travel any distance on a threaded rod or bolt.27R13 (H) 1/4"-20.. $1.39 ... $1.25142224 (H) 5/16"-18 $1.39 ... $1.25142225 (H) 3/8"-16 .. $1.39 ... $1.25

Ratchet� Multi-Position� Handle. Move the handle to any position so it doesn’t interfere with your work, or use it for those “tight” places where full turns are not possible. 21/2" nylon handle, height 17/16", with 1" long 5/16"-18 steel stud. 129131 (I) ............... $3.99 ... $3.59129132 (I) stud ....... $3.99 ... $3.59

(J)�Ergo�Style�Knobs. Ergonomically designed for comfort and strength.146910 15/8" D, 1/4" x 20 ......$1.50146911 23/8" D, 5/16" x 18 ....$1.50146912 23/8" D, 3/8" x 16 ......$1.50

GF

IH

J

to routing the “T”. The Medium T-Slot measures 3/4" W and 3/16" H at the base with a 1/2" shank. It requires the cutting of a 3/8" straight groove prior to routing the “T”. Both are carbide tipped, made in the USA.128256 small t-slot ............$23.99128257 medium t-slot ....... $26.99

Straight� Bits, for cutting straight grooves. 1/4" dia. bit has a 3/4" cutting length and 1/4" shank. 3/8" dia. bit has a 1" cutting length and 1/2" shank.24A04 1/4" dia. .................. $14.9924A33 3/8" dia. ..................$16.99

(D)�Cam�Action�Hold�Down�let’s you build quick action clamping into your special jigs, fixtures or fences. Comes with a 31/2" x 5/16" x 18 tpi T-bolt, steel and nylon washers. The 11/2" long lever is large enough to easily grip yet small enough to not interfere with your jig.145630 .................................. $5.99

Specialty�JigAnd�Fixture�HardwareA collection of every accessory that you need to build the kind of jigs and fixtures that increase accuracy, efficiency, and safety in your woodworking shop.

(A)� T-Bolts. Standard “toilet bolt” design, the 1/4"-20 bolts will slide easily into the small T-Slot groove. The 5/16"-18 will slide into the medium T-Slot groove. Sold in packs of 10. 130435 1/4"-20 x 13/4" ........... $7.50130436 1/4"-20 x 21/4" ........... $7.50130437 1/4"-20 x 31/2" .......... $9.99130438 5/16"-18 x 21/4" .......$11.99130439 5/16"-18 x 31/2" .......$11.99

(B)�Sliding�T-Nuts sold in packs of 10.130440 1/4"-20 ..................... $1.99130441 5/16"-18 .................... $2.50130442 3/8"-16 ...................... $2.50

(C)�WHITESIDE�Special�T-Slot�Router�Bits are designed to make easy work of creating your own professional wood-working jigs and fixtures. The Small T-Slot measures 5/8" W and 3/16" H at the base with a 1/4" shank. It requires the cutting of a 1/4" straight groove, with a router bit or dado blade, prior

D

A

C

B

Jig�And�Fixture�Knobs�And�Handles�Steel plated studs and brass threaded inserts assure strong reliable holding power. Plastic molded knobs provide a comfortable grip.



INCRA�Miter�SlidersEliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you’re ready! Miter Sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs. Sold individually. Each 4+

14V59 18" slider .................... $16.99......$15.29129795 24" slider....................$20.99......$18.89

INCRA�Miter�ChannelWhy trust the opera-tion of your Incra Mi-ter Gauge or Miter Slider in just any miter track. Each channel is constructed of hard anodized aluminum for durability with Incra’s trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 11/8" wide, 1/2" deep groove in your table or create a laminated fixture using 1/2" thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs and will work with any standard 3/8" x 3/4" miter bar. Add versatility to INCRA Miter Channel as well as most power tool miter gauge slots. The kit includes: (4) knobs, (4) steel washers, (8) nylon washers, (4) 2” bolts and (4) unique T-slot nuts.145709 32" miter channel ........................$16.50145710 48" miter channel ........................$21.99

Miter�Slot�Nut�KitAdd versatility to INCRA Miter Channel with this kit which includes: (4) knobs, (4) steel washers, (8) nylon washers, (4) 2" bolts and(4) unique T-slot nuts151088 4-pk miter slot nut kit ..................$19.99

Premium�Steel�Miter�And�Jig�BarsMaking jigs for your power tools is almost as chal-lenging and enjoyable as the woodworking projects themselves. Many jigs, par-ticularly those built for table saw applications need a mi-ter bar. Simple, durable and easy to use steel miter bars are available in two lengths, 18" and 24" (actually 233/4"). Both of these bars have multiple drilled and tapped holes of #10-24 or 1/4 -20 thread. You can easily bolt this bar to both 1/2" and 3/4" material. Each miter bar is 0.748" to 0.750" wide x 0.375" thick (3/4" x 3/8"). Mounting hardware included. Made in U.S.A.148848 24" bar ..........................................$24.99148849 18" bar ..........................................$19.99

Ultra�High�Molecular�Weight�Jig�And�Fixture�StockBecause of its low friction, highly durable surface and excellent machine ability, Ultra High Molecular Weight (UHMW) polyethylene is perfect for making jigs and fixtures, drawer guides, router bit setup gauges, etc. The 3-lb. bag contains a wide variety of both thick and thin pieces with no pieces longer than 12", the 41/2-lb. bag has the same variety but contains no pieces less than 16" long. Bags are randomly assembled with no guarantee of color.143291 3 lb. assortment .......................... $11.99145529 41/2 lb. assortment ...................... $21.99

UHMW�SheetsPerfect For Precision Jigs And Fixtures!A tough, heavy, dense plastic with self-lubricating properties, this Ultra High Molecular Weight material is great at reducing material to fence friction on router table fences or auxiliary table saw fences. UHMW is easily machined so it can also be used for table saw runners, router templates or any project component where friction is a problem. Sheets are 4" x 48".124225 1/8" thick ........................................$10.99124226 1/4" thick ........................................ $17.99124227 1/2" thick ........................................$25.99124228 3/4" thick ........................................$29.99

Slick�StripsReduce�FrictionTo the point where al-most everything moves like it’s mounted on ball bearings! This special UHMW (Ultra High Molecular Weight) a d h e s i v e - b a c k e d flexible plastic film has a low coefficient of friction and a high abrasion resistance that surpasses even TeflonTM. The 3" width is ideal for use on power tool fences and provides a slick, mar-free surface for router bases and wear plates of portable circular saws. The 3/4" width is perfect for renewing the smooth run of worn wooden drawers. 10.5' rolls are easily cut to length. Each 3+

16L64 3/4" width ..........................$7.25 ...... $6.5016L65 3" width ......................... $19.99 .... $17.99

A

C

E

B

D

INCRABuild-It�System�For�Jigs�&�FixturesQuickly and easily create a wide variety of common and special purpose jigs & fixtures that you typically find hanging on the walls and rafters in just about any woodshop. The highly versatile INCRA Build-It modular jig & fixture platform system begins with MDF Base Panels that are pre-cut and pre-drilled to instantly accept all of the components of the system. Add a Miter Slider in seconds and it’s automatically square to your saw blade with no tedious measuring or drilling. Then mount a fence in moments using the counter-bored mounting holes. The innovative T-slot Panel Connectors are specially designed aluminum components that simultaneously interconnect the panels and provide a rock solid T-slot for adding and holding jig accessories, fences, stops, INCRA Hold Down Clamps and INCRA L-brackets. With the Build-It system, you just connect the parts with a screwdriver and the included fasteners. Starter Kit includes one each of the small & large MDF Base Panels, 18" Miter Slider, Hold Down Clamp, L-Bracket pair, 1/4"-20 Knob Kit, 18" T-track, 18" T-track Plus and two 18" T-slot Panel Connectors. Plus 5 free jig plans!148117� (A)�MDF base panel, 73/4" x 151/2" $14.99148118� MDF base panel, 113/4" x 151/2" $16.99148119� (B) T-slot panel connector, 18" ....$16.99148120� T-slot panel connector, 24" ........ $21.99148121� (C) L-bracket (set of 2) ................... $9.99148122� (D) hold down clamp ................... $11.99148123� (E)�1/4"-20 knob kit (set of 4) .......$10.9914V59� INCRA Miter Slider, 18" ................$16.99129795� INCRA Miter Slider, 24" ...............$20.99148541� Build-It system starter kit ..........$119.99

Micro�Jig�ZeroPlay®�Miter�Guide�Bar�SystemReach new levels of accuracy with the ZeroPlay® Guide Bar. The one-touch calibration miter bar system makes it easy to adjust to the exact width of your miter slot. Build precision jigs with a miter bar that has no side-to-side play. The ZeroPlay Guide Bar is 91/2" in length that has two stacked half-bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot, Shop-smith™ or even the tricky General brand miter slot. ZeroPlay Stops are designed to travel within your miter slot serving as an anchor for your jig or to limit the travel of your ZeroPlay Guide bar.150754 single ZeroPlay® miter guide bar $11.99150755 ZeroPlay® miter guide stop ........... $4.99



CARTER�AccuRight™�Universal�Circle�Cutting�JigCut circles up to 4+ feet diameter with your bandsaw. The jig attaches quickly and easily to the Carter MAGFENCE or saws without the MAGFENCE with the universal attachment bracket. No drilling or external mounts necessary. Circle thickness limited only by bandsaw resaw capacity. Jig includes easy to read diameter measurements for precise circle size. Use with any blade guide, block or bearing.149941 .......................................................$64.99

CARTER�Urethane�Bandsaw�TiresEven under occa-sional use the tires on bandsaw wheels periodically need to be replaced. Unlike rubber tires, which are cumbersome to replace, these slip on without any special tools, messy adhesives, or excessive downtime. Simply heat in hot soapy water and stretch this tire on to the wheel and the bandsaw is ready to use. Urethane tires also offer better performance and enhanced durability. Each package contains one tire and is sized according to the wheel diameter of the saw. The tire may be trimmed for width.819402 10" bandsaw, 7/8" wide ................$20.99144968 12" bandsaw, 7/8" wide ................ $27.99144969 14" bandsaw, 7/8" wide ............... $32.99144970 16" bandsaw, 11/2" wide ..............$40.99144971 18" bandsaw, 11/2" wide ............ $45.99

Cool�BlocksTM Bandsaw�Blade�Guide�BlocksMade from a specially formulated graphite impreg-nated phenolic laminate, Cool Blocks are self-lubricat-ing, enabling them to with-stand the heat generated by blades running at high speeds. Eliminate the blade damage that occurs when teeth contact the metal blocks. Pack of 4 blocks to fit upper and lower guides. Saw Type Approx. Block Size49H01 Delta 14" .............. 1/2"x1/2" ...........$14.9949H07 Delta 8" & 10" ...3/16" round .........$14.9949H02 imported 14" ........ 1/2"x1/2" ...........$14.9949H03 Sears 12" ............. 3/8"x3/8" ...........$14.9949H06 old Sears ............ 1/4" round .........$14.9949H05 Shopsmith 11" ..... 3/8"x3/8" ...........$14.99144530 9" 2-whl. 13/64"x13/16", 13/64"x1" .....$14.99144531 Delta 12" ,16", Jet 12" 5/16" x 3/4" .$14.99144532 imports 12mm (.472") round .......$14.99

CARTER�Bandsaw�GuidesHere’s an upgrade that turns an ordinary bandsaw into an extraordinary bandsaw! These easy to install kits provide significant improvement in saw perfor-mance through more consistent blade tracking and reduction in blade friction. Bearings are fully sealed and lubricated and the easy to adjust all ball bear-ing guides eliminate the necessity of "side bearing blocks". Carter guides adjust for blades from 1/8" to 1" in width and are ruggedly built for long lasting durability. Each kit includes all mounting hardware and complete instructions. Fits round guide support shafts only. Hex shank model for old saws is avail-able as a special order item.812766 for Jet 14" bandsaw .................. $169.99812765 for Delta 14" bandsaw .............. $169.99

Bandsaw�Roller�GuidesConverting your old 14" bandsaw blade guides to precision roller guides is now as easy as changing your stock guide blocks. Micro precision ball bear-ings increase blade life and improve the accuracy of your cuts. No cutting or removing saw parts, no conversion parts and no set-up headaches. Upgrade your saw to get the performance you always wanted.129953 fits Delta 14" ...............................$76.99129954 Jet and most imported 14" ........$76.99�

KREG�Precision�Bandsaw�FenceIntroduce a new level of accuracy to your band saw with this precision fence. The rigid aluminum extrusion guarantees strength and stability, and is adjustable in two dimensions so you can set this fence parallel to the blade both vertically and hori-zontally. Cutting accuracy and repeatability is further enhanced by the precision lens curser that reads off of the included scale. Fits most 14" bandsaws, mounting hardware and instructions included. Op-tional Micro-Adjuster for ultra fine fence adjustments.146050 (A) fence ...................................... $107.99146053 (B) micro-adjuster .........................$14.99

A

B

CARTER�MAGFENCE™�Universal�Magnetic�FenceThe MAGFENCE attaches quickly and easily to most steel or cast-iron power tool tables regardless of size. Because there is no direct-to-table mounting required, this fence is truly universal. The fence has multiple T-slots on the sides and top for attaching a wide variety of accessories. Attach the MAGFENCE to the side of a table to convert to an aluminum table extension, giving you extra work area on small bandsaw and sander tables. Removes quickly to use with multiple equipment and is compatible with future MAGFENCE accessories.149522 16" magnetic fence ......................$79.99149523 191/2" magnetic fence ..................$89.99149555 Carter set up DVD ........................$14.95

Cobra�Coil�Bandsaw�Tension�SpringThe tensioning spring on a bandsaw will weaken over time, especially on saws that have had high tension “dialed-in” for re-sawing. The Carter Cobra Coil will restore the tension available for resawing and may even improve the performance of new machines. This spring will produce over 10,000 PSI of blade tension even on machines equipped with riser blocks. The Cobra Coil fits Delta, Jet and most imported 14" bandsaws.144967� .....................................................�$22.99

CARTER�AccuRight�Bandsaw�Blade�InsertsCarter AccuRight zero clear-ance band saw table inserts are molded of a Nylon material that saves the blade in case of accidental contact. A tighter blade opening results in less chipping and rough edges when cutting thin material. Delta style fits most Delta woodworking saws and many import clones. Jet style fits most Jet woodworking saws and many import clones. Sold in packs of three inserts.148113� inserts for Delta (3) ....................... $9.99148112� inserts for Jet (3) ........................... $9.99

CARTER�Clean�Sweep�Bandsaw�Tire�BrushCleans saw dust and debris from your 14" bandsaw’s tire to extend tire life and improve tracking. Mounts against lower wheel, easy to install and a simple but effective upgrade to any bandsaw.146153 ...................... $6.99



DELTA�Mortising�Attachment�KitFits most Delta and Sears models, and any other drill presses with 66 mm (25/8"), 50.8 mm (2"), 48 mm (17/8") or 38 mm (11/2") diameter quills. Fence bolts to drill press and provides 4" under the hold down rods. Kit includes attachment, fence, hold down rods and four chisels and bits (1/4", 5/16", 3/8", 1/2"). 813890 kit .................................................$99.99

WoodRiver®�Mortise�Chisels�and�Bits. Replacement bits for the Delta Mortising Attachment and other similar units. Each includes a chisel and bit, the set includes all four in a handy wooden case.143996 1/4" set ..........................................$13.50143997 5/16" set ....................................... $13.50143998 3/8" set ......................................... $13.99143999 1/2" set .......................................... $17.99144010 4-pc. boxed set ........................... $41.99

CLICO�Mortise�Chisels�and�Bits. Manufactured in Sheffield England from hand forged steel, these are the finest mortise chisels and bits we’ve ever used. The extra-long, deep-reaching chisels are taper ground to prevent hanging in the mortise. Bits are ground, sharpened and polished by hand for extra clean cuts. Fits Delta and most Taiwan manufactured mortising attachments.06V86 1/4" chisel & bit set ......................$99.9906V87� 5/16" chisel & bit set .................$101.9906V88 3/8" chisel & bit set ...................$104.9906V89 1/2" chisel & bit set ...................$104.99

Mortising� Chisel� Sharpener sharpens mortising chisels in seconds! Two models are available, choose the one that matches the manufacturer of your bits.144385 for WoodRiver®/Delta/Taiwan ....$39.9906V91 for Clico .......................................$119.99�

Drill�Press�Roller�SupportHave you ever needed three hands to work with long stock on your drill press, two to support the stock and one to lower the bit? Then this roller support is for you! Bolt it to any 21/4" to 4" drill press column and extend the outriggers, on one or both sides, up to 28" from the center of the table. The 93/4" work support rollers have 9" of vertical adjustment for accurate leveling. Features a center tray to hold extra bits or tools.06V95� ..........................................................$59.99

Quick�Set�Drill�PressHold-DownIf you have ever been frustrated by the inadequate clamp opening and clumsiness of most drill press clamps, here is y o u r a n s w e r. The post quickly mounts to most drill press tables with slots or holes, a bolt passes through the table and is secured with a large ring nut. To adjust the height for up to 5" of capacity, simply depress the clutch (similar to a pipe clamp) and slide the clamp head to the desired setting. Hold-down pres-sure is provided by the cam- action clamp on the head which features a 11/2" D rubber foot to help prevent marring your workpiece.145969 .......................................................$15.99147827�� large�clamp pad ............................. $2.99

underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-Track (C) is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Fence uses the same double-wide track for more accessory mounting options including a simple “L” stop (included) and optional Flip Stops. The 36" long fence is engraved with a center scale (zero in the center) and adjustments require no tools. Mounting hardware is included. For 13" and larger drill presses.149418��drill press table pkg. .................. $129.95148369� drill press table.............................$99.99148379 (A) 1" flip stop (pair) ......................$24.99142603� (B) deluxe hold down clamp .......... $8.99��

WOODPECKERS®�Drill�Press�Table�PackageThe Drill Press Table Package includes the drill press table, a pair of 1" flip stops (A) and two deluxe hold-down clamps (B) . The Woodpeckers Drill Press Table has a generous 16" x 23", 1" thick surface consisting of a MDF core covered with new Micro-Dot laminate. Micro-Dot has a unique texture; a grid of small dimples that collect sawdust allowing the surface to “grip” the workpiece under pressure. Each table includes a removable insert to minimize tear-out when drilling through material without the need of a “backer board”. Two, double-wide T-Tracks are embedded and bolted in place from

A

B

C

PALS�Contractor's�Table�Saw�Alignment�SystemThis “precision alignment system” replaces the manufacturer-supplied rear trunion bolts in your table saw allowing you to micro adjust your blade’s alignment to the top’s miter slot. Put away your old hammer and 2 x 4 “adjustment” tools and use the supplied Allen wrench for controlled, discrete adjust-ments that will result in perfect blade alignment. Kit comes complete with installation instructions.148721 3/8" stud kit: Craftsman (US made) and Ridgid saws ..................................$19.99148722 5/16" stud kit: Delta, General, and Craftsman (imported) saws .........$19.99

Magnetic�Planer�Knife�Setting�JigsThese economical jigs allow you to install and adjust planer knives quickly and accurately, saving you

both time and frustration. Magnets hold both the jig to the head and the knife to the micro

blade adjusters. Set your knives to a tolerance of ± .002" in minutes! Each set includes two jigs, case and instructions. Large jig fits planers with head diameters of 3" to 5", small jig fits planers with head diameters of 17/8" to 3".145256 large jig set ...................................$51.99145729 small jig set ..................................$51.99

Magna-Set�Jointer�JigLets you quickly and accurately set jointer knives in minutes or shift a nicked blade in seconds. Holds all steel knives in perfect alignment and at the precise height of the outfeed table during blade installation. Installs knives on jointers up to 8" wide.03V32 polycarbonate body .................... $34.99123037 steel body ...................................$52.99



WoodRiver®

Adjustable�Mobile�BaseThe WoodRiver® Adjustable Mobile Base will make it easier to move your tools, enabling you to get the most out of your existing space. The stable 4-wheel design features all steel construction with a 400 lb. capacity. The frame adjusts in 1" increments to easily expand from 12" to 50". Minimum size is 12" x 12", maximum square is 34" x 34" and maximum rectangle is 18" x 50". Step on the foot-activated metal cam levers, roll your tool into position then lower the tool to rest firmly on the adjustable rub-ber leveling feet.148515 .......................................................$59.99

HTC�UniversalMobile�BasesWith the HTC family of Universal Mobile Bas-es size is no longer an issue! Each base fea-tures side rails and cor-ner pieces with holes spaced every 1" to insure the perfect fit to your machine. All parts are included in this stable 4-wheel design that increases machine height by less than 1". Foot operated le-vers lock machines to the floor. The heavy-duty HTC3000 with integrated foot locks and floor locks assembles to a minimum square of 14" x 14", maximum square of 38" x 38", maximum rectangle of 22" x 54" and supports machines up to 700 lbs. Model HTC2000 assembles to a minimum square of 12" x 12", maximum square of 36" x 36", maximum rectangle of 20" x 52" and supports ma-chines up to 500 lbs. Model PM1000 assembles to a minimum square of 12" x 12", maximum square of 34" x 34", maximum rectangle of 18" x 50" and supports machines up to 400 lbs.146177 HTC 3000....................................$114.99150781 HTC 2000 ......................................$69.99150782 PM1000 ........................................$59.99

Heavy-Duty�Extendable�Roller�StandThe ultimate out-feed table solution for the small shop! Raise the stand to the height of the machine you are using up to 39", expand to the length you need up to 53", lock the casters and you’re ready to go. After use the stand compacts to 24"H x 26"W x 19"L for easy storage under a bench or saw wing. Features nine 15/8" dia. by 19" long rollers, and 4" double locking casters. Maximum load 300 lbs.144917 ..................................................... $274.99

HTC�Deluxe�Tool�TableThe HTC Deluxe Tool Table is constructed of heavy gauge steel and features an expandable 14" x 25" x 1" MDF top with a handy ruler imprinted on the surface. This table also features an 18" x 27" MDF lower shelf, rubber feet for non-skid support and a tough, powder-coat finish. Working height of 31" and 500-lb. capacity.151044 .................... $59.99

Five�Roller�StandThe Shop Fox FiveRoller Stand adjusts from 261/2" to 433/4", mak-ing it useful for most woodworking shop tools as an extra outfeed support, or a more general support that needs a mobile top surface. The rollers are 157/8" wide and the heavy steel construction is very rigid. This stand is an excellent shop helper when working on larger pieces of wood.143636 ...................... $94.99

HTC�Outfeed�RollerExtend your saw table a full 4 feet beyond the blade with an HTC Outfeed Roller. Few operations are more difficult than wrestling a giant sheet of plywood or particleboard through a table saw. This outfeed roller delivers immediate improvements in safety and accuracy, especially when you’re working by yourself. The support lifts and locks quickly into position with a single motion and requires no tools to engage or disengage. Model HOR-1038 is 37" wide, fits most 10" cabinet saws with adjustable mounting bracket and supports up to 200 lbs. with three columns of rollers.148581 .....................................................$379.99

Adjustable�Roller�StandExtremely sturdy and easy to open and close, this stand is great for helping you handle long and heavy boards. The 1" square steel tubing holds the galvanized dual bearing roller, while rubber feet prevent it from slipping. Height adjusts from 271/2" to 43". Weight capacity is 88 pounds.147185 .......................... $26.99

HTC�Port-A-Mate�Miter�Saw�WorkCenterNew and improved model features two-wheel portability for easier maneuvering, folding brackets on the front legs for integrated material storage and new work support lock design for more positive positioning of work supports and rollers. The Port-A-Mate Miter Saw WorkCenter takes the concept of multi-functionality to the next level. Benchtop tools such as miter saws, planers, band saws, scroll saws and more can be used interchange-ably. The heavy-duty built aluminum stand is 33" tall and 67" wide, yet expands to support material up to 16-feet. Legs fold in for easy storage and transport. Folded dimensions: 113/4" x 10" x 663/4". Universal machinery mounts snap securely to the aluminum top, making tool changes fast and easy. Adjustable work supports have rollers with integral material stops. Includes: (1) pair of universal machinery mounts; (3) roller supports; and 4-outlet 15-amp power center. FREE�bonus�cast-aluminum�quick-mount�vise�and�work�light.148989� Port-A-Mate Workcenter ............ $249.99834467� accessory mount (Pair) ................ $27.50

WoodRiver®�Universal� Mobile�Base�Hardware�KitThis kit provides the components to assem-ble a universal mobile base for your machine or tool stand using your plywood or similar panel cut to size. Made of heavy-gauge steel, once assembled the mobile base can support up to 600 lbs. and accommodate a 12" x 12" to 36" x 36" machine. The four mobile base corners are adjustable for different plywood thick-nesses from 1/2" to 11/2". Features two convenient, foot-operated pedals to raise the base onto casters or lower the base onto adjustable levelers. Two sturdy swivel casters and two fixed casters provide maximum mobility. Includes hardware for panels up to 3/4" thickness and instructions for assembly.150783 .......................................................$59.99

INCRA�Steel�Miter�Slider�SET h e I N C R A M i t e r Slider SE combines the versatility of the INCRA Build-It products with the unique perfor-mance and feel of the adjustable GlideLOCK miter bar used on INCRA miter gauges. Miter Slider SE bars are drilled to match perfectly with the INCRA Build-It Panels and a second set of 1/4"-20 holes to accept knobs and fasteners commonly used with jigs and fixtures. Long-wearing nylon GlideLOCK adjusting discs provide a precise fit in the miter slot of most table saws, router tables, and band saws, for smooth, low-friction travel. Steel bars include removable T-slot retaining clips for both ends of the bar for superior stability of larger jigs. The Miter Slider SE will fit square-sided 3/4" x 3/8" miter slots with or without a T-slot bottom. GlideLOCK adjustment accommodates slots measuring 0.740" to 0.765" in actual width. Miter Slider SE is not recommended for stationary jigs that must be locked into position within a miter slot; choose standard aluminum Miter Slider for these applications. 149882 18" Steel Miter Slider ...................$24.99 149883 251/2" Steel Miter Slider ..............$34.99

BOSCH�Gravity�Rise�Miter�Saw�Stand�Setup and breakdown in seconds without removing the saw on the Bosch T4B Gravity Rise Miter Saw stand. Features adjustable material supports and repetitive stops, rapid release universal tool mounts, 8" pneumatic wheels and adjustable leveling feet. Constructed of powder coated 11/2" tubular steel and designed to fit most miter saws. The expansion rails provide material support up to 18 ft.841931 .................................................... $339.99



Retracting�Casters�For�Contractor�Style�SawsPut your open base saw on wheels with the touch of a toe! Unlike mobile bas-es, these casters do not change the height of your saw. When the casters are retracted your saw sits solidly on its own legs. The swiveling wheels fit most open base saws. Set of four; all mounting hardware is included. On some saws, drilling may be required for the mounting hardware.141550 .......................................................$44.95

BORA�Clamp-N-Cut�Edge�GuidesBORA Clamp-N-Cut edge guides are ideal for all types of woodworking, cabinet making and DIY applica-tions. The exclusive swivel head design will allow the Clamp-N-Cut edge guide to firmly clamp angles up to 221/2° for flexibility in many clamping and cutting applications. These clamping edge guides feature an aircraft grade extruded aluminum body for straight accurate cuts and rigid clamping. The large, over-sized clamping handle allows for increased clamping pressure, while the soft-grip rubberized clamping pad insures your work material is held firmly in place, without fear of marring. Each unit includes an integrated hanging loop for convenient storage. Size denotes maximum clamping capacity.148685� Clamp-N-Cut edge guide, 24" ......$34.99148686� Clamp-N-Cut edge guide, 36" ......$39.99148687� Clamp-N-Cut edge guide, 50" ......$44.99150660� 3-piece set ....................................$99.99

Protractor�And�Saw�GuideImproves cutting accuracy, eliminates unnecessary measuring and marking and saves time on repetitive cuts. Just set the desired angle and cut! Makes 90° cuts on stock up to 121/4" wide. Designed for use with portable electric circular saws and jigsaws. Calibrated for 70° - 0° - 70° angles. 171/4" long, 11" wide.128193� ....................................................$13.99

HTC�Machine�CoversCondensation and the rust it brings on are all too often the results of ordinary ma-chine covers. These HTC covers are of a strong, du-rable cotton sheeting that is skip-coated with a spe-cial plastisol. The resulting cover is water resistant, but breathes so condensation doesn’t collect. The covers have the hems rolled around the entire perimeter, with a rubberized magnet sewn into each corner. These durable silver-colored pro-tectors are useful around the house, but are sized for woodworkers. The small 27" x 36" cover is great for benchtop tools; the medium 36" x 56" works fine on scrollsaws, short bed jointers, router tables and belt/disc sanders; the large 56" x 72" model is great for table saws, shapers, lathes, planers, long bed jointers; the jumbo 72" x 112" is for large table saws with extensions, and any other machinery too large to be covered with the other sizes.143838 small............................................. $18.50143839 medium .........................................$25.50143840 large ..............................................$37.99143841 jumbo ........................................... $55.99

Ball�BearingWork�RollersUnlike rol lers which operate only in a straight line, these 360° universal trans-fer bearings ex-cel where shop materials are p u s h e d a n d

turned in all directions. Make up your own outfeed tables for saws (great for bandsaws), finishing tables, assembly lines and more! Rollers have 5/8" or 1" hardened steel balls rotating on 1/8" dia. internal bearings. Load rating 75 lbs. each. Diameter Each 6 + 07B09 5/8" .................................... $2.99..... $2.7007B08 1" ..................................... $3.99..... $3.59

Laser�Guide�For�Miter�SawsConvert your miter saw into a precision laser-guided power tool! Simple to install, just replace the saw’s outside blade washer with the self-aligning Laser Guide. The guide projects a clear line just to the left of the cut, and turns on and off automatically at 400 RPM. Includes laser guide, batteries, three different installation bolts to cover most applications, hex key for battery installation, and soft sided storage case. No more “sneaking up” on a mark, just cut on the line. Will not fit Bosch, Rigid, ProTech or Dewalt model 704 or 705 saws.146808 .......................................................$39.99

Magna-SetFor�PlanersC h a n g i n g , adjusting and resetting planer knives can take an hour, but these magne-tized units let you do it in minutes. Each unit uses 9 Alnico magnets to position itself on the knife cylinder and set the blades to a toler-ance of ±.002". For use on planers with heads of 21/2" diameter or more. Set of 2, with instructions.03V31 pair��............................................ $154.99

Drill�PressSafety�PlanerWas developed to let your drill press cut a variety of panel edges, moldings, rabbets, tenons, rosettes, etc.Three high speed steel cutters mounted firmly in

the circular head of the planer produce a satin smooth finish. Width of cut capacity in one pass is 23/4", depth is 1/4"- 3/8". Includes sharpening wheel. Operates at 3,000–6,000 RPM, fits any 1/2" chuck.03Q41 .......................................................$55.50

A

KREG�Trim�Carpentry�ToolsThe Kreg Square-Cut™ is the fastest and easiest way for anyone to achieve perfect square cuts and consistent lengths. The innovative adjustable guide arm can be set the exact distance from the edge of the saw base to the inside edge of the saw blade regardless of your saw type. Kreg Crown-Pro™ gives trim carpenters and DIY enthusiasts alike a fast and easy way to add beautiful looking crown molding to any room in the house. Thanks to its unique design, the Crown-Pro dramatically simplifies the cutting process by eliminating the need for coping and of-fering adjustability for any spring angle between 30 and 60 degrees. Through a simple, durable design, the Multi-Mark™ takes the place of the T-square, torpedo level, depth gauge, trim tool, story stick, and much more. Whether setting the reveal on a door frame or ensuring accurate spacing between face-frame rails, this one tool does it all.150870� (A) Square-Cut saw guide ............$16.99150871��(B)�Crown-Pro miter saw guide ....$29.99150872� (C)�Multi-Mark marking gauge .....$19.99

B

C

81/2'�Cutting�GuideGet accurate, professional results cutting plywood, trimming doors, scoring wallboard, cutting linoleum, carpeting, and wallpaper. This guide is made of two 51" aluminum extrusions that interlock to make a full 102" straight edge. Two “C” clamps are included which may be positioned anywhere along the guide for secure alignment.144263 ...................................................... $32.99

Router Accessories


Bench Mate Non Slip PadLarge 24" x 48" non slip pad al-lows you to work without the limita-tions of clamps or vises. Ideal for all woodworkingjobs using a router, belt sander, pad or random orbit sander or working with hand tools. Unique web like design allows dust and chips to drop through the pad. To clean, rinse with water and lay flat to dry.123633 ...................................................$10.99

CMT 2050 Blade and Bit Cleaner Easily removes resin, gum and pitch without harsh or hazardous chemicals. Just wet the surface, allow a few minutes to penetrate, and wipe of the build up. 18 oz. spray bottle.817541 .....................................$12.50

Router BasePlate With Centering PinThis unit is pre-drilled for all the routers listed be-low and includes a cleverly designed centering pin that centers the guide to the router collet. Simply install a Porter-Cable style guide, use the centering pin to line-up the base plate concentric to the collet, install your bit. Fits the following mod-els: Sears Models 315.275 000-100-110, 315.175 070-040-050-060; Ryobi; Makita 3612 and 3621; Milwaukee 1615/1616/1619 series; Hitachi; Bosch 1615 and 1617/1618 series; DeWalt DW616/618 series, DW621, and DW625; Fein FT-1800; Elu 177; Porter Cable 690 series, 7529, and 8529; and Freud FT2000E. Complete with screws and installation instructions.144931 .......................................................$26.99

CMTBowl And Tray Router Template KitShow off your woodworking skill with a finely crafted bowl or tray using your router and this new method of creating bowls and trays. A turned bowl can be a very elegant project but many woodworkers are apprehensive about using a lathe. Snack trays make great gifts and this kit makes it easy. The CMT Bowl and Tray Router Template Kit includes two unique bowl and tray templates, a bowl and tray router bit with bearing, router collet extension and an instructional DVD.149502 ....................................................$99.99149503 quarter bowl tray template #11 $17.80149504 oval bowl tray template #12 .... $22.30823066 bowl and tray bit set ................. $62.99827414 router collet extension ............. $53.99

Hinge-Mate™ II Lets you accurately set hinges in minutes. Use it for doors, strike plates, boxes, or other edge routing projects. For hinges 1" - 5" long on stock up to 13/4" thick. Precision made of extruded aluminum with built-in clamps, hinge setting gauge, plus scales and guide pins for door and jamb mortising. Includes special 1/2" dia. carbide bit with top bearing and storage case.06Y01 ..................................................... $199.9906Y03 replacement 1/2" carbide bit ........ $34.99

Butterfly Inlay TemplateMaking your own butterfly template quick and easy with the butterfly inlay template. The template is made from tough, thick acrylic for longevity and perfect fitting inlays and features six undercuts on the outside edges to make removing the template from your workpiece easy. Seven different size but-terflys from 1" x 111/16" to 27/16" x 33/4" for a variety of applications. Use in conjunction with our Router Inlay Set 09I16 and Double Face Tape 15D25.146903 butterfly inlay template .............$24.9909I16 router inlay set ...........................$42.9915D25 dbl. face tape, 1" x 36yds. .........$20.99

TurnLOCK™Sign Making JigsThe SignCrafter features a 7" diameter clear base plate with centering pin, 5/8" and 7/16" TurnLock™ bushings molded of durable resin, 3/8" diameter core box carbide-tipped router bit, self-clamping bars for boards up to 12" wide, and 4 metal rails with joiners for boards up to 36" long. For use with up to 18 let-ters can be used at once. Includes 2 sets of 11/2" and 21/2" horizontal letters and numbers - 164 in total! The SignPro has all the features of the SignCrafter, plus enhanced metal-nosed TurnLock™ bushings, 1/4" diameter core box carbide-tipped router bit, low-profile c-clamps instead of clamping bars for superior performance an improved metal rails and joiners for increased precision. SignPro also adds 2 sets of 11/2" and 21/2" vertical numbers - 204 in total! 146219 TurnLOCK™ SignCrafter ...............$49.99147862 TurnLOCK™ SignPro .....................$57.50148659 horizontal letter set, 11/2" ..............$9.99148660 horizontal letter set, 21/2" ..............$9.99148661 vertical number set, 11/2" ..............$9.99148662 vertical number set, 21/2" ..............$9.99149551 sign jig rout. bits, 1/4", 3/8", 1/2" ... $21.99

Router Speed ControlElectronically var-ies the speed of your router. This means you’ll have less burning, tear-out, noise and tool wear, and safer use of large diameter panel raising bits. Use it with your router, or any shop tool that has a motor with replace-able brushes. You'll get full horsepower and torque at all speeds—from 0 to full RPM. Works on routers up to 3HP and/or 15 Amps. Features a replaceable fuse for circuit protection, variable speed dial, 3-po-sition speed switch (variable-off-full) and belt clip.142770 .................................................... $47.99

WHITESIDE Brass Set-Up Gauges & Precision Guide Bushingsperform a variety of functions, from setting depth of cut on a plunge router to set -ting bit height or fence depth on the router table. Stack them to-gether to combine measurements from 1/8" to 17/16". Brass gauges will not damage tool or bit edges. Set includes: 5 bars, measuring 1/8", 3/16", 1/4", 3/8", and 1/2" square.144932 21/2" long gauges ......................... $17.99836311 4" long gauges .............................$20.99148156 3/8" OD bushing ...........................$15.99147853 7/16" OD bushing ..........................$14.99147934 5/8" OD bushing ...........................$14.99

Brass Router Bushing SetSet comes in a durable blow-molded case and contains 2 lock nuts and 8 guides with 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 51/64" and 1" outside diameters. All guides protrude 0.240" to work with any template material of 1/4" thickness and larger. Fits all routers with Porter-Cable style sub-bases.144625 10-pc. set with case .................... $31.99144688 5/16" OD x 1/4" ID ............................. $7.19144689 3/8" OD x 9/32" ID ............................. $7.19144690 7/16" OD x 11/32" ID ........................... $7.19144691 1/2" OD x 13/32" ID ............................ $7.19144692 5/8" OD x 17/32" ID ............................ $7.19144693 3/4" OD x 21/32" ID ............................ $7.19144694 51/64" OD x 5/8" ID............................ $7.19144695 1" OD x 7/8" ID ................................. $7.19144696 bushing lock nut ............................$3.59

Router Accessories


WOODPECKERS® Router Table Insert PlatesThese plates are stronger and less prone to warp, flex or sag than other aluminum, phenolic, polycarbon-ate or acrylic router plates. Durable, low friction anodized coating on the aluminum model makes it easier for wood to slide across the plate. Besides superior material, each Woodpeck-ers Router Plate features eight top accessible fine pitch leveling screws and two adjustable spring loaded plungers to make it easy to achieve a flush, perfect fit in your router table opening. Included are (3) molded ABS resin locking rings, a brass starting pin, spanner wrench and router mounting screws. The ring opening sizes are 1", 13/16" and 25/8". The router plate itself has a 39/16" opening to fit any commonly available router bit. Dimensions are 91/4" x 113/4" x 3/8" thick. The plate listed for PC 690/890 will fit most routers with a 3-hole mounting pattern including Porter-Cable 690 and 890 Series routers. The plate listed for PC 7518 will fit many routers with a 4-hole mounting pattern including Porter-Cable 7518 and Triton. Both plates have pre-drilled access holes for routers with built-in lifting mechanisms. 148337 aluminum, for PC 690/890.........$99.99148338 aluminum, for PC 7518 ................$99.99830478 phenolic, for PC 690/890 ...........$59.99147785 (A) phenolic, for PC 7518 .............$59.99

A

Don't See It? Can't Find It?woodcraft.com has over 15,000 items

WOODPECKERS® RF-3 Router Table FenceHeavy-wall triangle shaped aluminum extrusion of the fence body incorporates integral dust collection with standard 21/4" dust port. The RF3 design also features melamine coated MDF fence faces that adjust for different bit diameters and 1/4" T-slots on front and rear for featherboards and to adapt to most positioning jigs. Use two of the Universal Track Clamps to use the fence with router tables without positioning T-tracks.149884 RF3 router fence ........................$169.99148486 univ. track clamp ..........................$16.99

8-Piece Insert Ring Set includes a full complement of sizes to accommodate virtually any router bit. The key to safe, effective routing operations on a router table is keeping the gap around the cutter to a minimum. Includes: Solid, 5/8", 7/8", 13/8", 15/8", 17/8", 21/8" and 23/8" openings.150673 ....................................................$39.99

3-Piece Blank Router Plate Insert RingsBlank insert rings can be drilled or routed for a custom size. Each ring is molded of ABS reinforced with polycarbonate. Includes three (3) blank rings.150995 ....................................................$19.99

Freehand Bit Guard provides a pivot point to rest your ma-terial while you advance the workpiece into the spinning router bit. An integral shield keeps dust from flying up into your face while the laminated birch plywood and phenolic frame channels chips to the 21/2" dust port. Attaches directly to any Woodpeckers router plate or router lift.148871 ....................................................$29.99

Router Table Insert Installation TemplateUsing this template and a template router bit you can rout out a perfectly sized 91/4" x 113/4" opening for any of the Woodpeckers router plates and lifts in your custom router table. CNC machined from 3/4" MDF for a perfectly smooth bearing surface and large enough for clamps. Perfect template adding a router solution to your table saw extension table.150996 ....................................................$14.99

WOODPECKERS®

Model 420 Router LiftThe Model 420 Router Lift combines instant eleva-tion change with micro-adjustment to dramatically reduce the time it takes to change a router bit while allowing the user to “dial in” bit height for precision mill-ing of stock. With a simple twist of the spring-assisted lift wrench, the router motor is free to be moved to any vertical location without any other action required. Fine, precise bit height changes are equally as effortless by “dialing” the thumb-wheel to make accurate adjustments across a 3/4" range. This combination of rapid eleva-tion change and micro-fine adjustability will save you time and increase the accuracy of your entire table based routing operations. This heavy-duty Router Quick-Lift is designed for the most demanding routing operations. The top plate is cast and ground aluminum “jig” plate offering superior stiffness and

rigidity. The carriage with integral motor clamping mechanism (sized for the industry standard PC 7518, sold separately) is accurately machined from solid aircraft grade aluminum and rides on large 1.025" ground and polished steel posts and precision machined guide bearings. There is even a “brake” connected to the micro-adjust gear-box to lock the carriage when even the slightest change in bit height is unacceptable. Each router plate is machined in a CNC milling machine to exacting tolerances to give you a perfect fit in router tables with a 91/4" x 113/4" opening. The plate also features engraved scales to simplify fence positioning while eight threaded setscrews are accessible from above for leveling. Adjustable brass plungers ensure a perfect fit in the router table opening. The plate has a 39/16" bit opening which is specially machined to accept the included molded insert rings with 25/8", 1" and 13/16" guide bushing openings. The router lift is complete with threaded starting pin, spanner wrench and detailed instructions. 149078 model 420 router lift ................. $329.99821719 31/4 HP router motor only ......... $299.99149529 motor pads, 31/2 " dia. .................$19.99

WOODPECKERS®

Adjustable Height Premium Router Table StandImproved steel leg set for your router table top is adjustable in height to add a greater degree of comfort and control for most woodwork-ers. Constructed of heavy 14-gauge powder coated steel made in the U.S.A. the stand is adjustable in height from 36" to 42" includ-ing router table top. Choose the 27" x 20" size for typical router table tops measuring 32" x 24", or the larger 37" x 20" size for router tables tops 42" and wider. Both stands feature two separate braces to further support the center area of your table. Stands can be used with both center and offset style router table tops. Each stand includes four adjustable non-skid levelers, assembly hard-ware and instructions. Wheel Kit includes two fixed wheels, one swivel caster with foot pedal, mounting hardware and instructions.150992 27" x 20" router table stand ......$169.99150993 37" x 20" router table stand ......$189.99150994 wheel kit for above stands ..........$49.99

WOODPECKERS®

Phenolic And MDF Router Table TopsWoodpeckers has been manufacturing commercial grade router table components for over 15 years and that wealth of experience is no more evident in the quality construction of their MDF core and solid phe-nolic router table tops. Choose phenolic laminated to MDF for flatness, while solid phenolic offers the advantages of the ability to withstand a variety of temperature and high humidity environments. 3/4" thick solid phenolic top uses a low friction, high hard-ness mineral based top layer that is harder and lasts longer than PVC. 13/8" thick MDF top is laminated on both sides with a top layer of Micro-Dot laminate that greatly reduces drag from sliding wood over the router table top. Both tops are machined in a CNC router to achieve tight tolerances and feature anodized aluminum T-tracks for fence positioning and combination miter channel/T-track bolted from underneath. Table size is 27" x 43" or 231/2" x 311/2" with 91/4" x 113/4" router opening centered length wise and offset back approximately 161/2" or 13" from front. Offset top has router opening rotated 90-degrees and centered along the 231/2" dimension and offset back approximately 10" from front. Offset router table tops are the configuration of choice when using an incremental positioning device.151087 27" x 43" phenolic top ............... $299.99151086 24" x 32" phenolic top ...............$219.99151149 27" x 43" MDF top ......................$199.99148688 24" x 32" MDF top ......................$139.99149228 24" x 32" offset MDF top ...........$139.99

Router Accessories


LEIGH Super Jigsoffer extraordinary joint making capability at ex-ceptional price points. Super Jigs are available in three sizes (widths), 12", 18" and 24" to satisfy the needs of every woodworker and every budget. No other jigs equal the versatility and precision of LEIGH Super Jigs. Variably spaced Through and Half-blind dovetails are standard on all Super Jigs. The infinitely adjustable one piece fingers are easily positioned for any joint pattern and you’re always guaranteed a half pin at each edge of the joint, regardless of board width. A cross-cut fence fits on the dovetail finger assembly to become a sliding dovetail template. You can rout half-blind pin boards and tail boards at the same time using the included two-function spacer to offset the tail board and rout complete joints in one pass. And with Super Jigs, you are not limited to one bit and one depth of cut. Just select any of the five half-blind bits available and rout half-blind joints in the depth that best suits your project. The finger assembly can also produce two sizes of box joints, 5/16" and 5/8". The amazing joint making capability of Super Jigs is due in part to the revolutionary new LEIGH E-Bush. Very precise adjustments for fit are made easily with the E-Bush. Settings are changed using the included pin wrench, and the uniquely shaped locking nut makes tightening the E-Bush a snap. Markings clearly indicate the adjustment direction necessary for the desired change. A simple twist of the E Bush changes its active diameter which in turn changes the fit of finger joints and half-blind dovetails. Easy to use cam action clamps and aluminum clamp bars hold the work piece securely against non slip material applied to each clamping surface. Includes: ½1/2"-8° dovetail bit, ½1/2" 14°-dovetail bit, 5/16" straight bit, ½1/2" to 8mm collet reducer, sliding dovetail fence, Half-blind bridge piece material, E-Bush, fully illustrated User Guide and Instructional DVD. 148134 Super 12" dovetail jig ................ $249.00148151 Super 12" w/acc. kit...................$379.00148135 Super 18" dovetail jig ................ $339.00148152 Super 18" w/acc. kit ..................$479.00148136 Super 24" dovetail jig.................$419.00148153 Super 24" w/accessory kit ....... $549.00148973 replacement E-bush .................... $11.99

LEIGH Super Jig Accessory Kits include a Vacuum & Router Support (VRS) and 7-Piece Boxed LEIGH Router Bit Set. Leigh’s ingenious VRS provides router support and dust-free routing. 7-Piece Bit Set features 8mm shank bits. Includes: 1/4" x 8°dove-tail; 5/16" x 8° dovetail; 3/8" x 8° dovetail; 7/16" x 8° dovetail; 1/2" x 10° dovetail; 1/2" x 12° dovetail; 1/2" x 18° dovetail.148147 Super 12" Jig acc. kit ..................$159.00148148 Super 18" Jig acc. kit..................$169.00148149 Super 24" jig acc. kit ..................$169.00

LEIGH Vacuum & Router SupportThe ultimate waste control and router support for your LEIGH dovetail jig - the revolutionary LEIGH VRS (Vacuum & Router Support). The router is positioned between the control arms attached to the vacuum chute below, and the arms are adjustable to suite any size router base. The vacuum chute glides effortlessly from side to side on nylon rollers and automatically follows the router when routing the joint or when the router is parked off to the side. The chute is always in the perfect position to catch the chips being thrown out by the high-speed router bit action. Chips and sawdust are drawn into the vacuum chute and down through the vacuum hose. Comes complete with two adaptors to fit all popular vacuum hose sizes from 1" to 2½". Can be used with a small shop vacuum or large dust collection system. Easily attach and use on any LEIGH Jig without jig modification. All mounting hardware is included.148141 for D4R PRO-24, 24" dovetail jig .$99.00148139 for Super 24" dovetail jig .............$89.00148138 for Super 18" dovetail jig .............$89.00148137 for Super 12" dovetail jig .............$79.00

LEIGH Multiple Mortise And Tenon AttachmentReplaces the dovetail assembly of your D4R jig to make perfect through or blind tenons, box or finger joints. Includes complete instruction booklet and 1/2" spiral cut router bit for joints 1/2" x 5/8" to 11/2" x 21/2". Jig requires 5/8" OD guide bushing to operate. For small joints to 5/16" x 5/8" a 5/16" spiral cut router bit and 7/16" OD guide bushing are required (not included).03K55 ....................................................$259.00

Extra Bits for MMT Attachment. Two flute, spiral upcut, high speed steel.03K52 1/2" diameter 1/2" SH ...................$26.99

WoodRiver® Dovetail Bits, 8mm Shank. These bits have 60% more metal than 1/4" shanks giving you greater stiffness for enhanced usability and increased feed rates in hardwoods. Requires 8mm reducer for 1/2" collet routers.143264 1/4" x 8° dovetail, 8mm SH ..........$17.99143274 5/16" x 8° dovetail, 8mm SH .........$17.99143258 3/8" x 8° dovetail, 8mm SH ..........$17.99143263 7/16" x 8° dovetail, 8mm SH .........$17.99143259 1/2" x 8° dovetail, 8mm SH...........$17.99143260 1/2" x 10° dovetail, 8mm SH.........$17.99143261 1/2" x 14° dovetail, 8mm SH .........$17.99143262 1/2" x 18° dovetail, 8mm SH.........$17.99143275 5/16" straight, 8mm SH .................$17.99143265 collet reducer 1/2" to 8mm ............. $8.39

LEIGH Finger Joint TemplatesFinger joints add visually striking symetrical design to corner assemblies. Unlike dovetails, finger joints do not interlock mechanically but their enormous glue surface area makes them as strong as dovetails throughout the life of today's modern adhesives. Leigh’s versatile 24" F3 Finger Joint Template is the most comprehensive and accurate jig of its kind. The F3 produces eleven sizes of square joints from 3/32" to 1/2" and can produce three sizes of square half-blind finger joints. Leigh's unique patented e-Bush system, included with the F3, guarantees a precisely fitted finger joint every time. Add the Leigh F24 or F18 Finger Joint Template to your respective Super Jig to rout an additional six sizes of finger joints and two sizes of square half-blind finger joints. Complete with instructions.151135 F3 for D-24 series dovetail jigs .$199.00 148143 F24 for super 24 dovetail jig .....$199.00148142 F18 for super 18 dovetail jig .....$179.00

LEIGH D4R PRO Dovetail JigsThe new D4R PRO-24 jig features a one piece alumi-num extrusion base with machined-in non marring textured clamping surfaces and machined-in side stops on the top and front of the jig body. The top side stops have a 3/8" recess for rabbeted boards. Like its predecessor, the D4R easily produces handmade looking dovetail pins and tails. Perfect fitting joints for tiny boxes or large case pieces can be produced in a variety of patterns by simply changing the adjustable guide fingers. Wooden pieces are clamped into the jig quickly and easily with the cam action clamps which can be adjusted for different stock thickness in seconds, or used to repeat the same clamp tension instantly. Through or Half-blind dovetails can be easily set up by simply flipping the finger assembly over. Jigs are meticulously engineered and constructed. Accepts boards up to 24" wide. Maximum pin thickness 11/4". Includes three carbide router bits, a 1/2" D x 8° x 8mm dovetail bit and a 5/16" x 1" x 8mm straight bit for through dovetails, and a 1/2" D x 14° x 8mm dovetail bit for half blind dovetails. Also includes a 1/2" to 8mm collet reducer and a 7/16" template guide bushing, comprehensive instruction manual and instructional DVD.151003 D4R-PRO dovetail Jig ................$499.00148154 D4R w/acc. kit .......................... $699.00

LEIGH D4 Accessory Kit includes a Vacuum & Router Support (VRS) and 12-Piece Boxed LEIGH Router Bit Set. LEIGH’s ingenious VRS provides router support and dust-free routing. 12 Piece Bit Set features 1/2" and 8mm shank bits. Includes: 1/4" x 8° dovetail; 5/16" x 8° dovetail; 7/16" x 8° dovetail; 11/16" x 8° dovetail; 13/16" x 8° dovetail; 7/16" x 11/4" CL straight; 1/2" x 11/4" CL straight; 1/2" x 10° dovetail; 1/2" x 12° dovetail; 1/2" x 18° dovetail; 1/2" to 8mm collet reducer.148150 ................................................. $239.00

www.woodcraft.com

Router Accessories


A B

Porter-Cable OmniJig Joinery SystemsThe “new” Porter-Cable Omnijig Joinery Systems are the ultimate Dovetail Jigs. Factory preset stops for templates and the innovative router bit depth gauge (pod) eliminates trial and error. A router stabilizer bar to prevents router tipping, textured work surfaces prevent material movement, on-board instructions and color coded dovetail “recipe” card truly simplify use. Each system includes an instructional DVD with Norm Abram. 3 year limited warranty.

The 24" Omnijig features an adjustable finger template, for variable-spaced half-blind and through dovetails. Specifications: wood capacity: 1/8” to 11/2”

in thickness; length: 44”; Height: 131/2"; Depth: 181/2"; Weight: 66lbs. Unit includes 24" variable finger tem-plate, left and right template stops, dovetail bit, straight bit, 7 template guides, screwdriver, wrench, and a bit depth gauge. 835090 (A) ....................... $599.99

The 16" Omnijig features a fixed-space finger tem-plate to cut half-blind dovetails with a single router pass. The template may also be used for rabbeted half-blind and sliding-tapered dovetails. Specifica-tions: wood capacity: 1/8" – 11/2" thickness; length: 36"; height: 13"; depth: 19"; weight: 45lbs. Includes 16" single pass half-blind/sliding tapered dovetail template, left and right template stops, dovetail bit, straight bit, 4 template guides, screwdriver, wrench and a router bit depth gauge.835089 (B) ............................................... $429.99

31

PORTER-CABLE 12" Dovetail JigModel 4210. If you’ve put off cut-ting dovetails with your router because of the complicated set-up of dovetail jigs, wait no longer. Porter-Cable’s new 12" dovetail jig will have you up and cutting dovetails in minutes. This jig is designed with patented alignment lines and a router bit depth stop so set-up is easy. Simply adjust the template so the alignment marks line up with your work piece, set your router bit depth according to the depth stop, and start routing. This jig will cut half-blind dovetails, rabbeted half-blind dovetails, and dovetail dadoes. The heavy-duty cam-type clamps with sandpaper-backed locking bars provide a solid grip for the wood. The template is CNC machined aluminum to provide superior accuracy. Handles stock 1/4" to 11/8" thick up to 12" wide. Includes: half-blind/dado combo template, 7° carbide dovetail bit with 1/2" shank, template guide and lock nut.146048 .....................................................$132.99

Deluxe Model 4212. All the features of the model 4210 PLUS through dovetails and box joints with an additional CNC machined aluminum template.

Includes Model 4210 compo-nents plus: through dovetail/

box joint combo template, 1/2" shank carbide-tipped straight bit, second tem-

plate guide and lock nut.146049 ................................................$179.99

Through Dovetail & Boxjoint Template, allows for 1/2" through dovetails and box joints. Includes 5/8" template guide and lock nut, 13/32", 1/2" shank carbide tipped straight bit.831157 model 4213 .................................. $74.99

Miniature Template Kit, allows for miniature half-blind dovetails, through dovetails, and box joints. Includes 3/8" & 5/16" template guide and lock nut, 9/32", 7° dovetail bit, 3/16" straight bit, small left and right offset guides.830583 model 4215 ................................$86.99

Replacement Bits from Whiteside.146433 17/32" D x 7° dovetail, 1/2" SH ...... $21.99148965 17/32" D x 7° dovetail, 1/4" SH ...... $21.99146432 13/32" D x 1" CL straight, 1/2" SH ...$19.99148964 13/32" D x 1" CL straight, 1/4" SH ...$19.99146434 straight + dovetail set, 1/2" SH ...$34.98

WoodRiver®

Half-Blind Dovetail JigThis dovetail jig has a rigid steel body with steel clamp-ing bars to hold the work piece in position while a CNC machined, solid aluminum template guides your router to make half-blind or half-blind rabbeted dovetail joints. 1/2" to 1" thick drawer sides and 5/8" to 1" thick drawer fronts up to 12" in width are possible. Both sides of the half-blind dovetail joint are routed at the same time for a precise match every time. Instruction manual included. Requires

1/2"-14° Dovetail Bit (not included) and 5/8" template guide bushing (not included). 148094 ..........................................

Half-blind Dovetail Jig, 12"........$59.99129676 .................................................

1/2"-14° dovetail bit, 1/4" shank $13.79144692 5/8" OD template guide bushing .... $7.19144696 template guide bushing lock nut .. $3.59148095 1/2" box joint template .................$23.99148096 1/4" box joint template .................$23.99

A

B

Frame And Panel TemplatesEach set is machined on CNC equipment for a precise fit every time. The sets are made of wear resistant and dimensionally stable 3/8" thick HDPE, each contains twenty templates designed for 91/2" to 221/2" wide doors. Each set includes two sets of indexing fences, which attach to indexing holes in the template, allowing you to center and square your work perfectly. The Frame & Panel Master indexes, centers and clamps the work and template together for machining. Large feed handles provide maximum control and safety. For more info, visit woodcraft.com!142823 frame and panel master...........$106.99142824 (A) cathedral templates (20) ....$104.99142825 (B) arched templates (20) ........$104.99

LEIGH Frame Mortise & Tenon JigsThe mortise & tenon is the strongest and most versatile of woodworking joints. With the Frame Mortise and Tenon fam-ily of jigs and a plunge router, every woodworker can easily produce this incredible joint with un-matched accuracy and speed. All of the guides and bits used with the original are common to both jigs allowing both FMT jigs to produce a vast array of mortise and tenon sizes from unbelievably small joints to massive 5" joints. Both jigs work with virtually any plunge router to produce precise, straight, double, angled and compound angled joints with sizes ranging from 1/16" x 1/8" to 1/2" x 5". As the name implies professional woodworkers will rely on the cast and extruded aluminum construction of the FMT PRO with cam-action speed clamps, retractable sight and integral dust collection system. The new Super FMT (shown below) incorporates the functionality of the original FMT at a fraction of the cost! The jig is constructed of heavy gauge rugged steel frame with multi-position clamping to clamp boards up to 3" x 5". Super FMT includes: universal sub-base that attaches to virtually any plunge router; two F-style clamps with 3" thickness capacity and adjustable side stop fence for Tenoning. Both jigs include five 5/16" joint guides (5/16" x 1/2", 3/4", 1", 11/4" and 11/2"); joint guide stand; 5/16" HSS spiral upcut bit with 1/2" shank; mounting hardware and as you would expect from Leigh Industries a comprehensive illustrated user guide. The vacuum box adds to the convenient operation of the Super FMT jig and like the FMT PRO includes adapters to connect to almost any shop vacuum or dust collection system.822034 (A) FMT PRO jig ...........................$899.00150724 (B) Super FMT jig (below) ..........$449.00150725 vacuum box for Super FMT .........$49.00144038 1/4" guide set (8 guides) ...............$59.00144039 3/8" guide set (4 guides)...............$33.00144040 1/2" guide set (4 guides) ...............$33.00

Onsrud HSS Bits03K42 1/4" D, 3/4" CL, 1/2" D .....................$20.9903K43 3/8" D, 11/4" CL, 1/2" D ...................$24.9903K52 1/2" D, 11/2" CL, 1/2" D ...................$26.99

A

B

Router Accessories


KREG Precision BenchtopRouter TableFetures a 16" x 24", 1" thick top is con-structed of an MDF core sand-wiched between high-pressure lam-inate. The top is CNC machined with a 91/4" x 113/4" opening and also includes a phenolic, 2" hole insert and combination miter & accessory T-Track. The sturdy steel stand measures 151/2" tall and features splayed legs for sure-footing during demanding routing tasks and lower braces on all four sides that are pre-drilled for adding a shelf or enclosing that area for dust control. The Precision Router Fence is constructed of extruded aluminum with many integral features like offset jointer routing, adjustable sub-fences, bit guard and 21/2" dust port. A knob on either end of the Benchtop Router Table Fence allows for quick adjustments while locking the fence firmly in position. Includes detailed instructions for mounting your router.148070 ................................................. $229.99

KREG Precision Router Table SystemThe 36" Precision Router Table Fence features a T-square style design which keeps the fence per-manently parallel to the miter slot. A fully-enclosed aluminum extrusion enhances dust collection while two fully independent fence faces provide zero-clearance support. The 24" x 32" Precision Router Table Top is made from a vibration and noise resistant MDF which features an Easy-Slide™ Micro-Dot high-pressure laminate. The durable MDF top is even reinforced by two steel support struts which keep it from bending or bowing over time. A “combo” miter channel / T-slot works with a wide variety of accessories. A standard sized insert plate (91/4" x 113/4") has been designed to mount to any router utilizing your router’s base plate and easy to use template (included). Completing the system is the optional Universal Steel Stand. This rugged steel stand is adjustable from 31" to 36" in height and is powder coated for durability. The complete Router Table includes Router Table Top, Router Table Fence and Universal Steel Stand.148837 Router Table Complete ............. $499.99148835 Router Table Top ........................$179.99148836 Router Table Fence ....................$199.99148008 Universal Steel Stand ................$149.99 148166 steel casters (4)............................$59.99148436 (A) True-FLEX featherboard..........$19.99

Kreg Router Table Switch AccessoriesThe Kreg Multi-Purpose Router Table Switch adds safety and convenience to your router table. Preci-sion Router Table Fence Stop takes the guess work out of routing specific lengths for dados and tenons.149970 router table switch .......................$34.99149971 router table fence stop ................$24.99146053 fence micro-adjuster ....................$14.99

A

PRAZI ChestMate™ Dovetail JigWhile dovetails are the perfect accent on many projects, few large projects rarely fit the confines of tra-ditional router dovetail jigs. That’s why the Prazi Chest -Mate will be your dovetail jig of choice for those larger projects. The ChestMate is constructed of cast

aluminum with clamping components to hold the jig tightly on the work piece during routing. Create your own dovetail arrangements with any width stock (not limited to 24") and thickness ranging from 1/2" to 1". 7° and 14° through dovetail templates are included with added templates for making four sizes of preci-sion box joints, mortise joints, dowel joints and two sizes of random spaced box joints. Use the simple instructions or DVD to create strong joints with your router. Requires 5/8½" x 7° or 3/4" x 14° dovetail router bit (not included) and 5/16" straight router bit (not included) for dovetail joints, 3/8" straight router bit (not included) for box joints and 5/8" template guide bushing (not included).837243 ..................................................$109.99

KREG Beaded Face-Frame Router BitsKreg Tool has designed specialized router bits specifi-cally for use with the Precision Beaded Face-Frame System. These bits are manufactured with 1/2" shanks and high grade carbide tips for durability. For each beaded profile, a beading bit and a notch-ing bit are needed to complete the shaping and notching of the beaded face frame joint. Notching bits are available in 11/2" and 2" sizes to allow one pass operations in 11/2" and 2" wide rails and stiles.150516 (A) 1/4" x 2" FF notching bit ..........$59.99150517 (B) 1/4" x 11/2" FF notching bit ......$54.99150518 (C) 1/4" standard FF beading bit ..$34.99150519 (D) 3/8" x 11/2" FF notching bit .....$54.99150520 (E) 3/8" x 2" FF notching bit ..........$59.99150521 (F) 5/16" standard FF beading bit $34.99150522 (G) 3/8" standard FF beading bit $34.99150523 (H) 3/8" s-profile FF beading bit ....$34.99150524 (I) 3/8" m-profile FF beading bit ....$34.99150525 (J) 3/8" h-profile FF beading bit .....$34.99

A E D B

H J I G F C

KREG Precision Beaded Face-Frame SystemBeaded face-frames are a great way for you to add detail, richness, and value to your cabinetry and furniture. Kreg Tool has designed a system that will help you build beaded face-frames faster, easier, and for a lot less money than ever before. The fence system works seamlessly with the KREG Precision Router Table, however, it can be easily installed on almost any full-sized router table via the miter gauge slot. Complete system includes: heavy duty aluminum fence with integrated tape measure; zero-clearance, ball-bearing sliding base; integrated clamp and precision router table stop; 1/4" precision router table set-up bar and 1/2" dowel pin; 1/4" x 11/2" face-frame notching bit; 1/4" standard face-frame beading bit and instructional DVD.150515 beaded face-frame system ....... $499.99

KREG Precision Router Table LiftFor customers who demand a complete routing system, now there’s no need to look any further than KREG. The Precision Router Table Lift makes even the most precise router height adjustments quick and easy through its patented Quick-Lift system. Lift mechanism mounted to heavy gauge aluminum insert plate machined for a 91/4" x 113/4" opening. Carriage with integral motor clamping mechanism (sized for the industry standard PC 7518, sold separately) is accurately machined from solid aircraft grade aluminum. Micro-Adjust thumb wheel eliminates the need for a crank handle while the spring-assisted lift wrench makes rapid height adjustment easy. Simple, easy to use lift-brake and adjustable reference scale can be set to zero from any bit position. Includes three molded insert rings with 25/8", 1" and 13/16" guide bushing openings.150514 precision router table lift .......... $329.99821719 31/4 HP router motor only ......... $299.99

KREG PrecisionRouter TableSetup BarsThese new Precision Router Table Setup Bars make adjust-ments to router tables, drill presses and table saws very simple and very precise. Unique design straddles the router bit or saw blade to allow for more precise height adjustment. A step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts. An extension on the end of each setup bar can be used to set fence depth of a table saw blade or router bit as well as setting the depth stops on a drill press or plunge router. Made of soft aluminum designed to prevent damage to your router bit or saw blade if contact is made during setup. Sizes include: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".150664 ....................................................$39.99

Router Bits


Round�Over�Bits�For uniformly rounded edges. Chang-ing the guide bearing to the 3/8" bear-ing listed below converts round over bits to Beading Bits for decorative period edging on furniture.147243 1/16" R, 1/4" SH ........$17.99129657 1/8" R, 1/4" SH .........$17.99147244 5/32" R, 1/4" SH .......$17.99147245 3/16" R, 1/4" SH ...... $18.99129659 1/4" R, 1/4" SH ........ $18.99147246 5/16" R, 1/4" SH ...... $19.99129658 3/8" R, 1/4" SH ........ $19.99129660 1/2" R, 1/4" SH ........ $24.99147247 1/8" R, 1/2" SH .........$17.99129661 1/4" R, 1/2" SH ........$18.99147248 3/8" R, 1/2" SH ........ $19.99129662 1/2" R, 1/2" SH ........ $24.99151189 3/4" R, 1/2" SH ........ $43.99129758 3/8" O.D. bearing ......$4.79

4-Piece� Round� Over� Beading� Bit�Sets. Include 1/8", 1/4", 3/8", and 1/2" radius bits.140806��1/4" SH, 4-pc. set ... $79.99140807��1/2" SH, 4-pc. set ...$84.99

Straight�BitsUseful in dadoing, general grooving, sign making, through cutting. 1/4"�Shank, two flutes, carbide.144146 3/16" D x 1/2" CL.......$10.99144147 1/4" D x 3/4" CL ........$10.99151178 1/4" D x 1" CL ..........$10.99151179 5/16" D x 1" CL ........$10.99151180 3/8" D x 1" CL ..........$11.99144148 1/2" D x 3/4" CL ........$11.99151181 1/2" D x 1" CL .........$10.99144149 5/8" D x 1" CL .......... $13.99151182 3/4" D x 3/4" CL ........$15.50144150 3/4" D x 1" CL ..........$14.991/2"�Shank, two flutes, carbide.151183 1/4" D x 3/4" CL ........$10.99144151 1/4" D x 1" CL ..........$11.99151184 5/16" D x 1" CL .........$11.99144152 7/16" D x 1" CL ......... $12.99151185 3/8" D x 1" CL ...........$11.99144153 1/2" D x 1" CL .......... $12.99151186 1/2" D x 11/4" CL ......$12.99144154 1/2" D x 11/2" CL ...... $14.99144155 1/2" D x 2" CL .......... $16.99151187 5/8" D x 1" CL .......... $14.99144156 3/4" D x 1" CL ..........$14.99151188 3/4" D x 11/4" CL ......$16.99144157 3/4" D x 11/2" CL ...... $19.99

Pattern�Cutting�Bits�For following templates and making plunge cuts. Cutter and bearing have same diameter.1/4"�Shank,�two flutes, carbide.129640 1/2" D x 1" CL ...........$17.99129642 5/8" D x 1" CL .......... $19.991/2"�Shank, two flutes, carbide.147239 3/4" D x 11/4" CL .....$25.19129641 11/8" D x 11/2" CL ... $29.99

45°�Chamfer�Bits�Chamfer bit cuts 45° bevels.144124 1/2" CL, 1/4" SH .......$21.99129674 5/8" CL, 1/4" SH .......$24.99144123 1/2" CL, 1/2" SH .......$21.99�129675 5/8" CL, 1/2" SH .......$24.99144122��11/4" CL, 1/2" SH ..... $44.50

Rabbeting�Bit�Sets�Cut five different widths with one bit. Change bearings for 1/4", 5/16", 3/8", 7/16", 1/2", up to 1/2" deep.129687 rabbet set, 1/4" SH $44.99129688 rabbet set, 1/2" SH $44.99

Biscuit�Joining�Router�Bit�SetEach set fea-tures a 5/32” cutter, hex key and three bearings to cut slots for #0, #10 and #20 biscuits.147994� 1/4" shank ............. $34.99147995� 1/2" shank.............. $39.99

Porter-Cable�Biscuits.17J64 #20, tube/100 .........$12.9916I20 #10, tube/125 .........$12.9916K24 #0, tube/150 ...........$12.99

Core�Box�BitsCore box bits produce a rounded bottom groove for fluting, panel edging and sign making. Two flutes, carbide.144121 1/4" D x 1/4" CL, 1/8" R, 1/4" SH .....$14.99144120 3/8" D x 3/8" CL, 3/16" R, 1/4" SH....$14.99144119 1/2" D x 3/8" CL, 1/4" R, 1/4" SH .....$14.99144118 3/4" D x 5/8" CL, 3/8" R, 1/4" SH ..... $19.99147240 3/4" D x 3/8" CL, 3/8" R, 1/2" SH .....$22.99144117 1" D x 3/4" CL, 1/2" R, 1/2" SH ......$24.99147241 11/2" D x 7/8" CL, 3/4" R, 1/2" SH ...$36.99

Panel�Raising�Bits2" D or 21/2" D, 1/2" SH, ball bearing guides.129670 ogee 21/2" D ........... $54.99129671 ogee 2" D .............. $39.99129672 cove 21/2" D ........... $54.99129673 cove 2" D ................$39.99

Table�Edge�Bits�Create the classic edge dressing for solid wood table tops.129678 21/2" D, 1/2" SH ....... $54.99129679 13/16" D, 1/4" SH .....$29.99

Flush�Trim�Bits�Features two flutes.129684 1/2" D x 1" CL, 1/4" SH $14.99129685 1/2" D x 2" CL, 1/2" SH $19.99

Bead�And�Flute�Bits�Used to make matching flute and bead edges on 1/4" thick wood strips so they can conform to a curved surface. 1/4" shank.129683 (A) 1/4" bead cutter $24.99129682 (B) 1/4" flute cutter $24.99129686 bead & flute set ....Save�$5� ................................ $44.98

A

B

3-Piece�Panel�Raising�SetsBoth sets include a 21/2" panel raising bit, rail bit and stile bit.141287��ogee pattern set ..$149.99141296��cove & bead pattern set .... ..............................$149.99

Three�Wing�Slotting�Cutter�SetThis seven piece set routes slots, grooves and rabbets. Vary the width of your slot from 1/16" to 11/16" by stack-ing cutters and shims. Depth of cut with bearing is 1/2". Set includes 1/2" arbor, 10 shims, 1/16", 3/32", 1/8", 5/32", 3/16", 1/4" cutters and wooden box for storage and protection of the pieces.147473 ...................................$64.99

1/4"�Tongue�&�Groove�BitCuts material up to 3/4" thick.140801 1/4" SH ................... $49.99140802 1/2" SH ...................$49.99

Plywood�Panel�BitsSized to fit today’s slightly reduced plywood thick-nesses. Two flutes, carbide.144140� 15/64" (1/4") D x 3/4" CL, 1/2" SH ... $10.99144141� 31/64" (1/2") D x 1" CL, 1/2" SH.......$12.99144142� 23/32" (3/4") D x 1" CL, 1/2" SH ...... $14.99144143� 15/64" (1/4") D x 3/4" CL, 1/4" SH ....$10.99144144� 31/64" (1/2") D x 1" CL, 1/4" SH ......$12.99144145� 23/32" (3/4") D x 1" CL, 1/4" SH ....... $14.99

Anti-Kickback�Router�BitsThe anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operation. Solid steel bodies are precision machined to carefully controlled tolerances. A final CNC machine 400 grit wet grind on the K-20 German carbide produces a clean, extremely sharp, and durable cutting edge. Bit bodies are coated to help prevent resin build up and make resin removal easier. All bits are carbide tipped. D = diameter, CL = cutting length, R = radius, SH = shank diameter

Cove�Router�Bits�For decorative edging with an inverted radius.147249� 1/4" R, 3/8" CL, 1/4" SH $20.99151190� 3/8" R, 1/2" CL 1/4" SH $26.99129663� 1/2" R, 1/2" CL 1/4" SH $27.99151191� 1/4" R, 1/2" CL 1/2" SH $24.50151192� 3/8" R, 1/2" CL 1/2" SH $26.99129664� 1/2" R, 1/2" CL 1/2" SH $38.39

Router Bits


Straight Chamfer V-Groove Roundover Beading Cove & Bead Roman Ogee Roundnose

Freud�Router�Bits�are�the�most�innovative,�precise�and�best�performing�bits�on�the�market.

All bits are carbide tipped unless noted. D=Diam.; CL=Cutting Length; R=Radius; SH=Shank Diameter; SC=Solid Carbide; A=Degree Angle

Round-Over�BitsIdeal for softening furniture edges & create decorative beads.1/4"�Shank828852 1/16" R .....................$27.99828706 1/8" R ......................$27.99828707 3/16" R……………......$32.99828708 1/4" R ..................... $32.49

Quadra-Cut™�Design1/2"�Shank815157 1/4" R ..................... $38.99828855 5/16" R .................... $35.99828712 3/8" R ..................... $36.99828713 1/2" R ..................... $48.99828714 5/8" R .....................$51.99828715 3/4" R ..................... $60.49834262 7/8" R ...................... $93.99815153 1" R...................... $110.99

Beading�BitsAdd an attractive bead profile to furniture& millwork.1/4"�Shank 839088 1/16 R ..................... $30.49828857 1/8" R ..................... $30.99844630 5/32" R .................... $30.99828717 1/4" R ..................... $32.99

Quadra-Cut™�Design1/2"�Shank840958 5/16" R .................... $35.99828859 3/8" R ..................... $36.99828860 1/2" R ..................... $48.99839065 1" R...................... $110.99840957 11/8" R ................. $132.49

Traditional�Bead�BitsForms a single bead with a square shoulder.1/4"�Shank828782 1/8" R .................... .$32.49828783 3/16" R .....................$37.491/2"�Shank828900 1/8" R ..................... $34.49828901 3/16" R .....................$37.49

Cove�&�Bead�BitsAdd distinctive design to cabinets, furniture, plaques and millwork. 1/4"�Shank828868 1/8" R ......................$37.49828869 1/4" R ..................... $43.49

Quadra-Cut™�Design1/2"�Shank837595 1/8" R ......................$37.49828870 1/4" R ..................... $44.99

Round�Nose�BitsIdeal for fluted millwork,signs & decorative veining.1/4"�Shank828807 3/32" R, 3/16" D ....... $20.99828681 1/8" R, 1/4" D .......... $20.49828682 3/16" R, 3/8" D......... $22.99828684 5/16" R, 5/8" D......... $28.491/2"�Shank828686 1/4" R, 1/2" D .......... $35.99828687 3/8" R, 3/4" D .......... $43.49

Roman�Ogee�BitsDecorative edging for cabinets and furnitureQuadra-Cut™�Design1/2"�Shank828861 5/32" R .................... $42.49828862 1/4" R ..................... $43.99

Straight�BitsThese Double Flute bits are ideal for generalstock removal with a smooth finish.

Double-Grind™1/4"�Shank828805 1/16 D, 1/4" CL .........$14.99828656� 1/8" D, 3/8" CL .........$14.99828657 3/16" D, 1/2" CL ........$15.99828659� 1/4" D, 1" CL ...........$16.99828660 7/32" D, 3/4" CL ........$15.99828661 5/16" D, 1" CL ..........$16.99828662 3/8" D, 1" CL ........... $17.49828663 3/8" D, 11/4" CL .......$18.99

Double-Grind™�1/2"�Shank828668 1/4" D, 3/4" CL ........ $20.49835495 1/4" D, 7/8" CL ........ $20.49829432 5/16" D, 1" CL ..........$18.49828669 3/8" D, 11/4" CL .......$19.49834230 1/2" D, 1" CL............$18.99828670 1/2" D, 11/4" CL .......$18.99828671 1/2" D, 11/2" CL ...... $21.99828672 1/2" D, 21/2" CL ......$31.99834233 5/8" D, 1" CL .......... $23.99828673 23/32" D, 11/4"CL .... $23.49835497 3/4" D, 11/4" CL ...... $23.99828674 3/4" D, 11/2" CL ...... $25.99828675 1" D, 11/4" CL......... $28.99

V-Groove�BitsFor multiple-sides projects, joinery, and easing edges.1/4"�Shank828689 90°A, 5/16" CL ...... $22.49828691 90°A, 7/16" CL ....... $26.991/2"�Shank828693 90°A, 1/2" CL ........ $32.49

Chamfer�BitsCreate a uniform chamfer on the edge of any workpiece.1/4"�Shank828724 15°A, 1/2" CL ......... $29.99828725 25°A, 1/2" CL ........ $29.99828727 45°A, 5/8" CL ....... .$36.99834269 30°A, 3/4" CL ........ $46.99

1/2"�Shank837545 15°A, 1" CL ........... $34.99828882 221/2°A, 7/8" CL ..... $35.49828728 45°A, 5/8" CL .........$37.49828883 45°A, 1" CL .......... $63.99834270 30°A, 3/4" CL ........ $46.99

Flush�Trim�BitsBottom-mounted bearings for trimming laminate counter tops and doing pattern work. Two flutes design for fast cutting.1/4"�Shank828729 3/8" D, 1" CL ...........$16.99828731 1/2" D, 1" CL............$16.49

1/2"�Shank828733 1/2" D, 1" CL............$18.99828734 1/2" D, 11/2" CL ...... $20.99828735 1/2" D, 2" CL .......... $29.49

Top�Bearing�Flush�Trim�BitsIdeal for lettering andother template work where the work piece is being grooved or routed out.1/4"�Shank828738 1/2" D, 1" CL........... $23.99828892 5/8" D, 9/16" CL ....... $23.99828739 5/8" D, 1" CL .......... $26.99828740 3/4" D, 1" CL ...........$27.99828893 1" D, 1" CL ............. $32.49

Top�&�Bottom�Bearing�Flush�Trim�BitsDouble bearing design allows you to use best cutting direction for work piece. 1/4"�Shank833361 1/4" D, 11/4" CL ...... $34.99

1/2"�Shank835152 3/4" D, 15/8" CL ...... $46.99

Quadra-Cut™�Raised�Panel�BitsIdeal for creating raised panels, decorative tops, & molding. Patented design pro-duces a full 11/2" wide reveal. Bits with back-cutter (b/c) include shims to allow adjustment of tongue thick-ness from 7/32" to 1/4". 1/2"�Shank828933 bevel profile ............$79.99833266 cove profile ............ $94.99828801 ogee profile ............ $94.99828802 bevel profile w/b-c $99.99 828803 cove profile w/b-c .. $99.99

2 Cutters Shear Down2 Cutters Shear Up

Pe r m a - S H I E L D ™�Coating protects from rust & heat build-up.

Tico™�Hi-Density�Carbide specially formulated toreduce wear & last longer.

Quadra-Cut™�4-Cutter�DesignFreud’s�Exclusive�Router�Bit�Innovations

Router Bits


Quadra-Cut™�Table�Edge�&�HandrailBitsIdeal for sturdy,attractive handrailsfor staircases.1/2"�Shank828787 125/32" R ................ $84.99831124 13/32" R .................. $83.99828930 3/8" R ......................$76.49

Quadra-Cut™�Classical�Tabletop�BitsThese bits are ideal for enhancing the edges of occasional tables (any type of table, night stands, etc.) 1/2"�Shank837611 3/8" R ..................... $64.49828913 25/64" R .................. $64.49

Adjustable�Tongue�&�Groove�SetFor stock thickness of 1/2" to 11/4".Groove cutter adjusts for widthsof 7/32" to 3/8".1/2"�Shank825745 ...............................$79.99

Base�Cap�&�Molding�BitsCreate baseboard or traditional “mop” boards in any width from any wood.837211 (A) style 163 ..........$61.99837227 (B) style 166 ..........$67.99837228 (C) baseboard bit $46.99

Window�&�Brick�Molding�BitsWindow stool bit forms the edge ofa window stool. The brick molding router bit creates industry standard profile #180.

837229 (A) window stool ... $55.49837233 (B) brick molding .. $88.99

Rabbeting�BitsThis router bit canalso be used asflush cutting trimbit. Includes hexwrench and bearingsfor 1/8", 1/4", 5/16", 3/8", 7/16" and 1/2" wide rabbets.828705 1/2" CL, 1/2" SH .......$57.49 4-Piece�Under-Size�

Plywood�SetIdeal for 1/4", 3/8", 1/2" and 3/4" plywood. 1/4" Shank. Wooden case included.814819 .............................. $64.99

Door�Casing�Molding�BitsAdd elegant detail to doors, windows, built-ins and many other projects. 837223 (A) style #356 ........$73.49837206 (B) style #366 ....... $62.99837224 (C) style #376.........$67.99837225 (D) style #445........$73.49

Wainscoting�&�Beadboard�Molding�BitsReversible wainscoting bit works with stock from 1/2" to 5/8" thick. The beadboard tongue & groove system mills beadboard in a variety of thicknesses from 3/8" to 3/4". Use the 1/4" shank solid carbide beadboard v-groove bit to complete the bead-board design. (A) reversible wainscoting bit837230 .............................. $40.99 (B) beadboard Tongue & Groove bit837231 .............................. $88.99(C) beadboard v-groove bit837232 ...............................$19.49�

Premier�Solid�Carbide�BitsExclusive TiCo™ Hi-Density Solid Carbide bits outperform the market in both finish quality and bit life.

1/4"�Shank(Up Spiral)828750 1/8" D, 1/2" CL ....... $20.99828778 3/16" D, 3/4" CL ........$21.99836793 1/4" D, 1" CL ...........$51.99

1/2"�Shank(Up Spiral)828779 3/8" D, 11/4" CL ...... $49.49

1/4"�Shank(Down Spiral)828781 1/4" D, 1" CL .......... $21.99

Wide�Crown�Molding�BitsMill your own 51/2" wide crown molding in your choice of wood and profile! You can mix and match upper and lower profiles to produce your favorite design.Use the bevel cutter to rout perfect 38° and 52° bevels on the stock to finish the job.836883 upper profile 1 .......$73.49836884 lower profile 2 .......$73.49836885 upper profile 3 .......$73.49836886 lower profile 4 .......$73.49836887 upper profile 5 .......$73.49836888 lower profile 6 .......$73.49837331 set profile 1 & 2.. $129.99836889 molding bevel bit $69.99

2-Piece�Entry�&�Interior�Door�Bit�SystemThe entry & inte-rior door router bit system allows any woodworker tobuild entry and interior doors with true mortise and tenon construction. Material range from 13/8" interior to 13/4" for exterior doors. Patented design allows you to mill tenons of virtually any length.1/2"�Shank833845 ............................ $199.99

Freud’s�Premier�Adjustable�Rail�&�Stile�SystemWith Freud’s unique, patented system, you are able to build any style of cabinet door in a range of door thicknesses and sizes! Create extended tenons for extra door joint strength, adjust groove width for different panel thicknesses & choose from a variety of material thicknesses 5/8" to 11/4".

Add additional cutters to the bits above to create thicker doors with double profiles and glass panel doors. *Rail & Stile sets sold separately

Optional�Double-Sided�Profile�Cutters include two cutters and a spindle to use with your rail & stile bit set to produce Double-Sided (DS) doors in stock up to 11/4" thick with stub tenons or long tenons. 150678 Round DS cutters ...$95.99150679 Ogee DS cutters .....$95.99150680 Bead DS cutters .....$95.99150681 Bevel DS cutters ....$95.99

Optional�Glass�Panel�Door�Cutter�includes one straight cutter to mount on your stile bit to produce glass panel doors.

150682 Glass Cutter ......................$37.99

2-piece Rail & Stile sets. 1/2" Shank 150675 Rndover ................$119.99150676 Ogee profile ..........$119.99150677 Bead profile ..........$119.99845352 Bevel profile..........$119.99

3-Piece�Adjustable�Cabinet�Door�Sets combine the new adjustable rail and stile bits with your choice of panel profile in medium (23/4" dia.) or large (31/2" dia.) Quadra-Cut™ raised panel cutter. The 150687,�150688,�150692 and 845683 include a raised panel w/ back-cutter. 1/2"�Shank3-Piece�Sets150684 lg. bevel panel, round rail .......... $179.99150685 lg. cove panel, round rail ........... $179.99150686 lg. ogee panel, round rail .......... $179.99150687 lg. bevel panel w/bc, rnd. rail ....$191.99150688 lg. cove panel w/bc, round rail ..$191.99150689 lg. bevel panel, ogee rail ........... $179.99150690 lg. cove panel, ogee rail............. $179.99150691 lg. ogee panel, ogee rail ............ $179.99150692 lg. cove panel w/bc, ogee rail ....$197.99845683 lg. ogee panel w/bc, ogee rail ....$197.99150693 med. ogee panel, ogee rail ....... $179.99

5-piece�set also includes reversible glue joint bit and door lip bit.1/2"�Shank150683 med. ogee panel, round rail ......$263.99

A B C

A

B

CBA D

A

B C

1 2 3

654

Router Bits


WHITESIDE�Pattern�Cutting�BitsAre the tools to use when working with template pat-terns. Now you can put your pattern on top of the wood and see your cut. The special bear-ing and stop collar assembly installed above the cutters allows you to move smoothly around the pattern. Or use it with a router table when the pattern is on the bottom of the wood you’re shaping. Carbide tipped, with two flutes, same diameter cutter and bearing. Diameter Cutting Length Shank 24A61 1/2" ................. 1"..............1/4" .........$24.9924A62 5/8" ................. 1"..............1/4" .........$29.9924A63 11/8" .............11/2" ...........1/2" .........$44.99

WHITESIDE�Biscuit�Joining�BitsFeatures a 5/32" cutter, wrench and bearing to cut slots for #20 Biscuits. Add bearing A for proper cut-ting depth of #10 biscuits, or bearing B for proper cutting depth of #0 biscuits. The biscuit bit set is your best value, it includes cutter, wrench and all three bearings.24D71 biscuit bit, 1/4" SH ..........................$19.9924D72 biscuit bit, 1/2" SH ..........................$21.9924Z70 bearing A (#10) ................................ $8.9924Z71 bearing B (#0) .................................. $9.9924D70 biscuit bit set, 1/4" SH ....................$34.9924D75 biscuit bit set, 1/2" SH ....................$32.50

WHITESIDE�3-Wing�Slotting�CuttersAre superior to straight router bits for slotting the edges of boards. Carbide tips cut spline joints in solid wood, plywood, and particle board. A kerf 1/2" deep is cut quickly and cleanly. Cutters require arbor listed below to operate.24D61 1/16" cutter only ...............................$17.9924D62 5/64" cutter only ..............................$19.9924D63 3/32" cutter only ..............................$19.9924D64 1/8" cutter only ...............................$19.9924D65 5/32" cutter only* ............................$19.9924D66 3/16" cutter only ..............................$19.9924D67 1/4" cutter only ...............................$19.9924D68 1/4" shank arbor w/bearing ............ $9.9924D69 1/2" shank arbor w/bearing............. $9.99*Proper Size for cutting plate joiner biscuit slots.

WHITESIDE�Over-Under�Flush�Trim�Router�BitsWhich flush trim bit do you use more often: bearing on top or bearing on bottom? What if you didn’t have to choose? Introducing, the new “Over-Under” flush trim router bits from Whiteside. You can easily position the bit height to allow the bearing to guide along the top or bottom of a workpiece.147970� 1/2"D, 1/4"SH�....................$24.99149528� 7/8"D, 1/2"SH�....................$34.99

WHITESIDE�Spiral�Flush�Trim�BitsThese bits can be used for any flush trim situation and are an excellent choice for pattern or template work. Great for use with plywood, melamine or other laminated surfaces where chip-out is a concern. Use downcut for handheld router operations or choose the upcut for router table applications.127465 1/4" D, 1" CL, 1/4" SH upcut .........$39.99127466 1/4" D, 1" CL, 1/4" SH downcut .....$39.99127467 1/2" D, 11/4" CL, 1/2" SH upcut .....$69.99127468 1/2" D, 11/4" CL, 1/2" SH downcut $69.99

WHITESIDE�Bowl�&�Tray�Router�BitsEach bit has a bearing (150511 has two bearings) mounted on the shank to follow a template so you can make divided trays or recess the outline of your favorite grilled foods on a grilling plank. The 1/4" radius formed at the bottom of these bits provides the perfect transition from vertical to horizontal surfaces for serving and cleaning.150511� (A)�1/4"R x 3/4"D x 1/2"SH ..............$32.9924D85� (B)�1/4"R x 3/4"D x 1/4"SH ..............$29.99825834� (C)�1/4"R x 11/4"D x 1/2"SH ............$35.99

CA B

Upcut�Spiral�CuttersProvide a smooth cut in all plunge routing opera-tions. Spiral design pulls waste from the cut, leaves a flat bottomed mortise, and permits accurate cuts without chatter in any wood. Machined from solid HSS or carbide, these production quality bits will provide excep-tional results for serious woodworkers. Cutting Overall Cutting Dia. Length Length ShankOnsrud�HSS�Bits12W52 1/8" .........27/8" ..... 3/8" ...... 1/4"..... $11.99128718 1/4" ........... 3" ........ 1" ....... 1/4"......$19.9903K42 1/4" .........31/4" ..... 3/4" ...... 1/2"......$20.9912W53 5/16"........31/4" ..... 3/4" ...... 1/2"......$19.9903K43 3/8" .........33/4" .... 11/4" ..... 1/2"......$24.9903K52 1/2" .........31/2" .... 11/2" ..... 1/2"......$26.9903K53 3/4" .........31/4" .... 11/4" ..... 1/2"..... $44.99

Whiteside�Solid�Carbide�Bits03K32 1/8" ........... 2" ....... 1/2" ...... 1/4"......$19.9903K33 1/4" .........21/2" ...... 1" ....... 1/4"......$19.9908K61 3/8" ........... 3" ...... 11/4" ..... 1/2"..... $51.9903K35 1/2" ........... 3" ...... 11/2" ..... 1/2"..... $52.99

Antique�Beading�Bits�These�bits�produce a single bead on flat work, or a full bead (with two passes) as seen on the corner of a table leg.24J05 5/16" BD, 1/4" SH ...........$39.99814384 1/4" BD , 1/2" SH ............$33.9924J15 5/16" BD, 1/2" SH ...........$39.99813220 3/8" BD , 1/2" SH ...........$38.99812396 1/2" BD , 1/2" SH ............$40.99

A B D E

F

WHITESIDE�2-Piece�Stile�And�Rail�Door�SetsImproved design allows you to make full size stile and rail frames on your router table for raised pan-els, plywood panels, even glass panel doors. The interlocking profile and the panel groove are both cut in one pass. Ball bearing guides control the cutting depth so the bit sets can also be used on rounded, arched or special shaped doors. Simply switch router bits to change from cutting stiles to cutting rails. No extra components are required for glass panel doors, simply change cutter configuration and make your cuts like just like panel door construction. Use clips or corner trim molding to hold the glass pane in

C

place. For cabinet door construction with under-sized 1/4" plywood panels use the 7/32" (5.5mm) plywood conversion kit with any of the six different profiles of 2-piece sets. Ideal for stock from 5/8" to 7/8" thick. All bits have 1/2" shanks.150803 (A) round-over stile & rail set ......$99.99150804 (B) ogee stile & rail set ................$99.99150805 (C) bead stile & rail set ................$99.99820246 (D) straight stile & rail set ...........$99.99814981 (E) traditional stile & rail set .......$99.99813830 (F) classical profile st. & rail set $99.99818469 (G) 7/32" plywood conversion kit .$44.99

G

Router Bits


WHITESIDE�Multi�Use�BitsPlywood�Dado�Bits. Plywood construction using da-does has always been frustrating because hardwood plywood is typically made under-sized. These odd sized straight bits are made specifically to eliminate that problem. They pro-duce a precision dado for a tight, no-slop fit. The 31/64" bit is for use with 1/2" plywood and the 23/32" is for 3/4" plywood. Diameter Shank Cut Length24K07 31/64" ........... 1/4" .............3/4" .........$19.9924K17 31/64" ........... 1/2" ..............1" ..........$19.9924K09 23/32" ........... 1/4" .............3/4" .........$21.9924K19 23/32" ........... 1/2" ..............1" ..........$19.99150756 3-pc. dado bit set ...................................... 7/32", 31/64", 23/32", OD; 1/2" SH.......$49.99845066 dado bit 7/32" OD x 3/4" CL 1/2" SH $24.99

Pointed�Round-Over�Bits are unbelievably versatile bits that can be used for fluting, beading, molding and even sign carving. Radius Diameter Shank127281 3/16" ......... 3/8" .......... 1/4" ...........$20.99127282 1/4" .......... 1/2" .......... 1/4" ...........$22.99127283 3/8" .......... 3/4" .......... 1/4" ...........$28.50127284 3/8" .......... 3/4" ...........1/2" ...........$28.99

Plywood Dado

Pointed Round Over

WHITESIDE�Shaker�Stile�And�Rail/Raised�Panel�Router�BitSetsMake frames for Shaker and Mission style doors, as well as raised Shaker panels of different reveal widths. The groove formed with the rail cutter allows for the perfect fit of standard 7/32" thick plywood panels to make Mission style doors a snap. The Shaker Raised Panel set consists of a panel raising bit at a 15 degree relief angle and 3 differ-ent bearings to produce reveal widths of 1/8", 3/16", and 1/4". Works with frame stock from 5/8" through 13/16" in thickness. The stile and rail set includes a stile and a rail bit.148047 (A) stile and rail bit set ................$99.99148155� (B)�raised panel bit set ................$59.99

A

B

WHITESIDE�Rabbeting�SetsYou’ll easily take on the challenges of drawer fronts, tenons, box lids, and rabbets with these versatile tools. Set includes one-piece bearings to make rab-bets 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" deep. Plus, there’s a full-size bearing for the 13/8" large diameter bit for smooth flush trimming operations. The rabbeting bit has a maximum cut of 1/2", and every cut will be safe and smooth with the added face-shear on this uniquely designed bit. Set includes eight bearings, Allen wrench, rabbeting bit, and two storage “Trees” in a fitted box with cover.143222 1/4" SH ..........................................$62.99143223 1/2" SH...........................................$62.99

Round-Over� Bits. For smooth, uniformly rounded edges. Lowering the depth setting will produce a rounded corner with a decorative fillet. Two flutes with bearing.24B91 1/16" R, 1/4" SH ................................$23.9924B92 1/8" R, 1/4" SH .................................$26.9924B93 3/16" R, 1/4" SH ................................$26.9924B94 1/4" R, 1/4" SH .................................$26.9924B95 5/16" R, 1/4" SH ................................$26.9924B96 3/8" R, 1/4" SH .................................$26.9924B97 1/2" R, 1/4" SH .................................$32.99146203 1/8" R, 1/2" SH ..................................$22.9924C22 1/4" R, 1/2" SH ..................................$23.9924C24 3/8" R, 1/2" SH ..................................$28.9924C25 1/2" R, 1/2" SH .................................. $31.9924C27 3/4" R, 1/2" SH ..................................$58.99

Chamfering�Bits�cut 45° bevels.24L08 5/8" CL, 1/4" SH ...............................$26.9924L18 5/8" CL, 1/2" SH ...............................$26.9924D32 1" CL, 1/2" SH ..................................$41.99149227 7/16" CL, 1/4" SH ..............................$24.99

Roman� Ogee� Bits create classic decorative moldings. Two flutes with bearing.24E16 5/32" R x 9/16" CL, 1/4" SH ................$36.9924E17 1/4" R x 11/16" CL, 1/4" SH ................ $37.9924E18 5/32" R x 9/16" CL, 1/2" SH ................$36.9924E19 1/4" R x 11/16" CL, 1/2" SH ................ $37.99

WHITESIDE�Carbide�Tipped�Router�BitsWhiteside Machine Company has been making top quality router bits for over 30 years. Using the latest technology, up-to-date machinery, and expert craftsmen, they make a bit that features thick, high grade carbide, accurately ground to produce the smoothest finish cuts on your work. Each bit is inspected after every manufacturing step to ensure satisfaction and consistent quality. USA. Bearings may be imported.

All bits are carbide tipped unless noted. D=Diam.; CL=Cutting Length; R=Radius; SH=Shank Diameter; SC=Solid Carbide;

Straight�Bits, 1/4" shank, two flutes.24A01 SC 1/8" D x 3/8" CL ..........................$14.9924A04 1/4" D x 3/4" CL ................................$14.9924A07 5/16" D x 1" CL .................................$14.9924A08 3/8" D x 1" CL ..................................$16.5024A10 1/2" D x 1" CL .................................. $17.9924A15 5/8" D x 3/4" CL .................................$17.9924A14 3/4" D x 3/4" CL ................................$18.99

Straight�Bits, 1/2" shank, two flutes.24A31 1/4" D x 3/4" CL .................................$17.9924A33 3/8" D x 1" CL ..................................$16.9924A35 1/2" D x 1" CL ..................................$16.9924A36 1/2" D x 11/2" CL ..............................$18.9924A38 5/8" D x 1" CL ..................................$18.9924A39 3/4" D x 1" CL ..................................$18.9924A43 1" D x 11/4" CL ................................$23.99

Cove�Bits. For decorative edging with an inverted radius. Two flutes with bearing.24C92 1/4" R, 1/4" SH .................................$26.9924C93 3/8" R, 1/4" SH ................................. $31.9924C94 1/2" R, 1/4" SH .................................$32.9924D11 1/4" R, 1/2" SH ................................. $27.9924D12� 3/8" R, 1/2" SH .................................$29.9924D13� 1/2" R, 1/2" SH .................................$35.99

V-Groove� Bits cut shallow and deep grooves for signs or furniture decorations. Two flutes. With 90° or 60° V-cut angle.24B70 90° ....... 3/8" D x 3/8" CL, 1/4" SH ...$18.9924B71 90° .......1/2" D x 3/8" CL, 1/4" SH ....$21.9924B81 60° ........1/2" D x 3/4" CL, 1/4" SH ....$24.99

Dovetail�Bits. Use with dovetail templates.818071 1/2" x 10°, 1/2" SH ..........................$23.9924D41 1/2" x 14°, 1/4" SH ......................... $21.9924D42 1/2" x 14°, 1/2" SH...........................$24.9924D43 3/4" x 14°, 1/2" SH ..........................$23.9924D44 1/4" x 7.5°, 1/4" SH (SC) ................. $21.9924D45 3/8" x 14°, 1/4" SH ......................... $21.99

Panel�Raising�Bits. Two (21/2" D) or three (33/8" D) flute, 1/2" shank, ball bearing pilots.24F26 ogee, 21/2" D .................................. $74.9924F27 ogee, 33/8" D ................................$126.9924F36 straight, 21/2" D, 25°......................$77.9924F37 straight, 33/8" D, 16° ...................$126.9924F46 cove, 21/2" D .................................. $74.9924F47 cove, 33/8" D ................................$126.9924Z91 replacement bearing ....................... $4.99

Cove

Ogee

Straight

Router�BitShank�AdaptersUniversal split-type steel bushing allows 1/4" or 3/8" shank bits to fit routers with 1/2" collets. 11/4" overall length.128665�1/4" to 1/2" ..................................... $14.99111164� 3/8" to 1/2" .................................... $15.99

Cove ChamferV-GrooveStraight Round-Over

DovetailRoman Ogee

Buy Any 3 Whiteside Router Bits On These 2 Pages And

Deduct 10% Off Their Cost!

Router Bits


Router�Bit�Bearing�KitNever be without just the right bit in the middle of a project again! This kit allows you to vary the depth of your rabbeting bits, or convert regular bits into top-bearing pattern or lettering bits. Kit contains two 1/4" stop collars, two 1/2" stop collars, six short and six long bearing screws, two hex keys for the stop collars, two hex keys for the bearing screws, and one each of the following diameter bearings: 3/16" ID x 3/8", 1/2", 5/8", 3/4", 7/8", 11/8" and 13/8" OD 1/4" ID x 1/2", 5/8" and 3/4" OD, 1/2" ID x 3/4", 11/8" and 11/4" OD. Includes bearing lube applicator and plastic storage case.145725 ....................................................... $51.99

MILESCRAFT�Long�Reach�Router�Bit�Set23/8" overall length is ideal for sign making. Carbide-tipped for a durable long lasting router bit. 1/4", 3/8" and 1/2" core box bits with 1/4" shank. Use 1/4" bit with 1.5" letter templates included with SignPro jig. Use 3/8" bit with 2.5" letter templates included with SignCrafter and SignPro jigs. Use 1/2" bit for “bold” 2.5" letters.149551 ....................................................... $21.99

T-9�RustProtectantDeveloped by Boeing Aviation for long term metal protection on aircraft. A solvent and paraffin wax formula, it penetrates into metal pores, displaces mois-ture, and dries to a thin film that will protect your woodworking equip-ment for months. Offers long term storage protection for up to one year. Since it contains no silicones or Teflon® and dries completely within a few minutes, it will not transfer to wood surfaces or interfere with subsequent finishing. 12 oz. non-fluorocarbon spray is ozone safe.03Q56 ........................................................ $17.99

Rust� Free. New, improved, the best we’ve ever tested! Removes rust and corrosion from most metal surfaces. Spray on and wash off rust with soap and water. 8.45 oz. pump.03Q57 ....................................................... $11.99

Blade�and�Bit. Removes resin, gum, and pitch from saw blades, router bits, drill bits, planer knives, and tool tops. Fast, safe and easy to use, simply wet the surface with this biodegradable liquid, allow to penetrate for 3-5 minutes, then wipe off. 8.45 oz., pump spray.128479 ...................................................... $11.99

Total�Tool�Care�Kit includes one each of the above.128478 set of 3 Save Over $7! .............. $34.50

Anti-Fatigue�Floor�MatsOur mats are engineered for proper leg and back support in the workshop, at home, or anywhere you stand for extended periods of time. Made from a durable, tough PVC material that creates a non-slip surface that is easy to clean. Protect your floors at the same time you shield your falling tools from damage. Mats are 3/8" thick and black in color.144546 24" x 36" ......................................$19.99144547 24" x 60" ..................................... $31.99146033 2' x 5' bevel edge ........................ $33.99

Eliminator�RC™�Quick�Change�ChuckThe Eliminator allows you to change router bits in 5-10 seconds with only one hand and a hex key wrench. Holds bits securely yet eliminates wrestling with wrenches, leaves one hand free to hold bit in the collet and lessens your chances of nicking or pinching fingers. Chuck accepts 1/2" shank bits directly into collet, use appropriate reducing sleeves for 1/4" shank bit. The DeWalt version fits models 616, 618 and 621.146076� chuck for DeWalt .........................$64.99128665 1/4" to 1/2" bit shank adapter.......$14.99111164� 3/8" to 1/2" bit shank adapter ......$15.99

Solid�BrassRouter�Inlay�SetLets you make absolutely perfect fitting inlay repairs and decorations on your work. Install the precision machined bushing with collar and 1/8" dia. cutter in your router and follow the template to cut the design in your work. Remove the collar from the bushing and cut the positive inlay using the same template for a perfect-fitting inlay. Set includes solid carbide downcut spiral bit, quick-change bushing, template guide, and instructions. Fits Porter Cable, Black and Decker, and any router with a Porter Cable bushing adapter.09I16 ........................................................ $42.9909I17 repl. 1/8" downcut spiral bit .............$15.99

Free Centering Tool Assures Perfect Alignment!

WoodRiver®�20-PieceBit�SetsThe anti-kickback design of these in-dustrial quality car-bide router bits limits stock feed rate for safer router operation. A final 400 grit, wet grind on the K20 German carbide produces a clean, extremely sharp, and durable cutting edge. Precision Japanese bearings ensure smooth edge routing operations. Set includes: 1/4", 3/8" and 1/2" dia. straight; 1/2" 3° bevel trim; 1/2" dia. V-groove; 3/8" & 1/2" 14° dovetail; 1/4" & 3/8" radius cove; 1/4" slotting; 1/2" bevel/trim; 1/2" flush trim; 3/16", 1/4" & 3/8" radius round over; 3/8" x 1/2" CL rabbeting; 1/2" CL 45° chamfer; 1/4", 1/2" round nose; & 5/16" radius roman ogee bit.143025 1/4" shank 20-pc. set ............... $169.99143026 1/2" shank 20-pc. set ............... $169.99

WoodRiver®® Ten-Piece�Router�Bit�SetsThese bit sets represent great value compared to buying individual bits. Includes: 1/4", 3/8" and 1/2" diameter straight bits; 1/2" x 14° dovetail bit; 1/2" diameter Core Box; 1/2" diameter V-groove bit; 1/2" diameter flush trim bit; 1/4" radius cove bit; 1/4" radius roundover bit and 5/32" radius roman ogee bit. Made in China.150704 1/4" shank 10-pc. router bit set ..$83.99150705 1/2" shank 10-pc. router bit set ..$83.99

Magnetic�Tool�HolderKeeps shop tools organized and ready for use. Heavy-duty bar magnet firmly holds tools. 12" or 24" long with two adjustable hanger brackets. Great for use above work benches, lathes, or on any shop wall.17N31� 24" holder .....................................$17.99143968� 12" holder ................................... $11.99

WHITESIDE�Glue�Joint�BitsThese bits provide a quick and easy solution for drawer and box construction. these bits produce interlocking profiles for strong glued joints. 45°�Lock�Miter�Joint�Bits24F92� (A) 1/2" - 11/4″"CL, 31/8″"D, 1/2"SH�$124.99812508� (A) 1/2" - 3/4″"CL, 2″"D, 1/2"SH�......... $94.99

Locking�Drawer�Glue�Joint�Bits,�single joint814638� (B)�1/2"CL, 3/4″"D, 1/4"SH�...............$34.00814944� (B)�1/2"CL, 1"D, 1/2"SH�.................$36.0024E02� 1"D, 1/4"SH, double joint�............. $54.9924E03� 1"D, 1/2"SH, double joint�............. $54.99

Standard�Glue�Joint�Bit,�dual joint24E01� (C) 11/2"D, 1/2"SH�.........................$61.99

A B C

Shop Accessories


DELMHORST�Moisture�MetersDelmhorst has been the leading manufacturer of high quality pin-type moisture meters for over 50 years. The new “J” series meters offer the latest advancements in moisture meter technology along with Delmhorst dependability. All models are pack-aged in a sturdy plastic storage case, come with 2 extra pins, an instruction manual, and a wood moisture measuring information booklet. All units weigh 11/4 lbs, are 8" x 13/4" x11/2", use one 9 volt-battery (included) and have a 1 year manufacturer’s warranty.

(A)� Model� J-Lite has micro-controller circuitry for increased reliability and accuracy, with 12 bright LEDs for precise readings from 6%-30% moisture content.123200 ................................................... $148.00(B)�Model�J-2000 features a micro-controller circuit for increased reliability and accuracy, has built in corrections for 47 individual wood species, will accept wood temperature corrections from 0 - 255°F., averages up to 100 accumulated read-ings, and has a moisture range of 6%-40%.123201� ...................................................$301.00

(C)� Model� J-4 uses the familiar analog readout, has a built in calibration check, temperature stable circuitry, and measures moisture content from 6%-30%.123199� ....................................................$244.75

AB

CWAGNER�Digital�Pinless�Moisture�MetersThese meters use the latest in electromagnetic wave technology to provide fast, pin-free moisture content readings. Both meters read an area of 11/2" x 21/2" to a depth of 3/4". This reading automatically compensates for the species of wood you are mea-suring by the specific gravity you select right on the meter. The MMC 205 has a moisture content reading range of 5% to 20% displaying in whole numbers, with a specific gravity range of 0.30 - 0.70. The MMC 220 has an added “Press/Hold” feature to capture readings, higher moisture content range of 5% - 30% displaying in tenths of a percent, and an extended specific gravity selection of 0.20 - 1.00. Each meter includes a soft carrying case and a comprehensive reference library CD that will allow you to find species correction information, view the moisture content and wood video library and much, much more.143611 (A) MMC 205 ............................ $280.00143612� (B) MMC 220 ............................ $395.00

A

B

4-IN-1�Multi�Function�DetectorMeasures moisture in wood from 8-22%; detects studs, beams and joists behind walls up to a depth of 3/4"; locates and traces live AC wires behind walls up to 2" deep plus checks recep-tacles and switches; and detects metal of all kinds behind walls up to 2" deep. Requires one 9 volt battery (not included).148111 .........................$34.99

GERSTNER�INTERNATIONAL�10-Drawer�Tool�ChestThis classic American style chest is constructed entirely of Red Oak with tongue and groove joinery that insures strength and durability. The green felt-lined interior provides cushioning, and the hardwood design provides protection from moisture. The front lid stows under the 10 drawers in the open position and covers the drawers when in the locked position. Polished chrome plated hardware. Hand rubbed stain with lacquer finish. 24" W x 16" T x 10" D. 147378 ................................................... $399.99

Heavy�Duty�CastersPut your entire shop on wheels! These casters features easy rolling, non-marring, polyurethane tires

that will not “flat spot” from remaining stationary. The swivel and the wheel ride on ball bear-ings. The double brake on styles (A) and (B) locks the wheel and swivel rotation with the touch of a toe. The 41/4" tall, 3" casters, are available in three versions: (A) double-locking, swiveling with 1/2"

mounting hole for bolting direct to machinery legs, (B) double-locking, swiveling with 4 hole mounting plate, and (C) non locking, non-swiveling with 4 hole mounting plate. The 4" (51/8" tall) and 5" (61/4" tall) casters have 4-hole mounting plates. (D) are locking style, 41/8" tall with a choice of 1/2" or 3/8" diameter, 11/2" long threaded stems. Load rating for each caster is 300 lbs. Styles may be mixed or matched for quantity pricing.For more info, visit woodcraft.com. Style Wheel Each 6+140639 A 3" ................... $16.50 .....$14.85141051 B 3" ................... $16.50 .....$14.85141052 C 3" ...................$11.50 ......$10.35141050 B 4" ...................$18.50 .....$16.65141053 C 4" ...................$12.50� .... $11.25140642 B 5" ................... $19.99� ..... $17.99141054 C 5" ................... $12.99 .....$11.69148594 D 3/8" dia. stem ..... $16.99 .... $15.29148595 D 1/2" dia. stem ..... $16.99 .... $15.29

A

BC

D

WoodRiver®�Machine�CastersHeavy duty, plate mounted machine casters with a weight rating of 300 kg (660 lbs) each or 600 kg (1,320 lbs.) per 4 casters. More than just wheels for your machine, they also feature a foot which when lowered not only raises the machine off the caster but may also be used to level your machine. The feet also help reduce vibration while the machine is in use. Each set of four casters come with a wrench for lowering and adjusting the foot under load. 149511 set of four ......................................$99.99

Shop�ScissorsDon’t settle for an inexpensive pair of scissors that dull quickly, reach for a pair designed to cut and keep on cutting. Our scissors are made in the USA from hardened 420 stainless steel, have comfortable ergonomic, “soft” grips and they’re sharp! Sharp enough to cut the Woodcraft Catalog in half with a nice clean cut. They’re great for cutting sandpaper; leather or cloth for upholstery; sheet cane and even veneer. Overall length 91/2". USA.148708 ......................................................$19.99

PINNACLE®�Leather�Shop�Apron�This heavy, full-grain leath-er shop apron provides great protection but is soft and pliable for your comfort. A full 21" x 27", the extra length helps protect your clothing from sawdust and stains, and keeps saw-dust and shavings out of your pants pockets. There are two breast pockets, one sewn for pencils and the other large enough for your safety glasses, and two large lower pockets with full flaps to keep your stuff in and debris out. Fully adjustable shoulder straps crisscross and are sewn in the back to keep the weight on your shoulders instead of your neck. For durable, comfortable protection in your shop this apron is what you need.149422 ......................................................$79.99

SONIN�Digital�Moisture�MeterProfessional quality at a very affordable price, Sonin’s new pinned meter measures moisture content from 5% to 40%. Great for inspectors, contractors and homeowners! Test hard or soft woods, concrete, plaster, carpet or wall surfaces prior to painting or wallpapering. Easy to read LCD dis-play, simple pushbutton controls and a one year manufacturer’s warranty. Requires a 9 volt battery (not included).150096 ....................... $49.99

Shop Accessories


TOOLClad™�Magnetic�Tool�CoversProtect�your�investment!�TOOLClad™ Magnetic Tool Covers virtually eliminate rust from the cast iron tables of your table saw, bandsaw and scroll saw by magnetically adhering to the table top to seal out moisture. The padded magnetic material protects against dings and dents while creating a usable work surface. 148346� table saw, 28" x 44" ....................$54.99148347� band saw, 20" x 20" ....................$19.99148348� scroll saw, 16" x 24" ....................$15.99

TOOLClad™ �Magnetic�AccessoriesMagnetic Decimal Equiva-lent and Pilot Hole Charts made from the same material as the Tool Covers. Affordable, easy reference, always close at hand.148349� decimal equivalent ....................... $3.99148350� pilot hole ........................................ $2.99

LUMBER�WIZARD�Metal�DetectorFeatures both an audible tone and a switchable vibration alert for noisy environments. Finds steel, stainless steel, zinc, magnesium and aluminum. Locates large metal pieces up to 4" deep, a large screw at 3", a medium nail at 2", a paneling nail or staple at 1", through wood. Simply lay the wand on your wood, adjust the sensitivity and pass the wand over the wood in sweeping motions. Requires one 9 volt battery, not included.142778 ......................................................$99.99

LITTLE�WIZARD�Metal�DetectorAlerts metal presence with both LED lights and audible tone. Requires one 9 -volt battery, not included.142012 .....................................................$19.99

B

C

D

E

A

Heavy-Duty�Galvanized�Shelving�SystemWith their unique hanger brackets these shelves can be quickly and easily hung, even on difficult surfaces like concrete or cement block walls. This heavy-duty, galvanized-

finish shelving system is suitable for your garage, work-

shop, or basement, and you can set an entire shelving system up in min-

utes. The double-slotted Standards offer multiple mounting options and lengths.

Make an 8' by tying two four’s together with a connector bracket. Screw your standards directly to wall studs , or use one of the two optional hanging brackets. The Fast-Mount Bracket can be mounted with screws to the top plate of a wall or over wall studs. The Horizontal Hang Track allows you to place standards wherever you want by sliding them along the 40" track. The Hang Track can be mounted to the top plate of a finished wall, over stud walls, or to any wall with anchors. Fast Mount Hooks allow shelf standards to be hung from basement sill plates. Two types of shelf brackets are available: Double Brackets rated at 150 lbs. per bracket; Sup-ported Brackets rated at 300 lbs. per bracket. Unless noted, all components are sold singly.

147670� 6' shelf standard........................ $12.99147671 4' shelf standard ...........................$8.50147672 (A) 2' shelf standard .....................$5.79147673 20" supported shelf bracket ....... $7.99147674 13" supported shelf bracket .......$6.99147675 (B) 10" supported shelf bracket ..$5.79147676 14" double shelf bracket ..............$5.79147677 (C) 10" double shelf bracket ........$4.99147678 (D) horizontal hang track .............$5.99147679 (E) fast-mount bracket .................$4.50147680 connector bracket ........................$1.99147681 mounting screws (14) ...................$2.99147875 fast-mount hook ..........................$4.50

Heavy-Duty� Shelving� Kit includes three 6' shelf standards, three 2' shelf standards, three 20" sup-ported brackets, six 13" supported brackets, and six 10" supported brackets. Screws not included.147682 Save Over $17! ......................... $139.99

PINNACLE®�Wood�RackThis multi-purpose rack provides 6 levels of storage for lumber, pipe, molding and other long items for your shop, shed or garage. The rack is made from heavy-duty tubular steel and is powder-coated to resist corrosion. Perhaps best of all – you don’t have to put it together, it’s ready to mount right out of the box. Each of the horizontal supports are welded to the vertical frame with a slightly upward cant and capable of holding up to 110 lbs. per pair. Mounting hardware is not included. USA.150160 ......................................................$79.99

Lumber�Rack�Storage�SystemThis high load capacity sys-tem can also be used to store lumber. Straps are available in 24" and 55" lengths, formed from 3/16" thick steel and coat-ed with a rust protective coating. The 24" Strap has a mounting tab that nests under the 55" Strap for ap-plications where the units are stack mounted. Straps have “keyed” adjustment holes, spaced 11/2" apart, to lock the Brackets into the Straps. The Brackets are also 3/16" thick coated steel, rolled to form an inverted “U” shape for strength. The 18" Bracket will support a 300 lb. load at the tip. The shorter Brackets will support even more weight because of their reduced distance from the wall. The only real limitation of this system is the wall to which it is attached. The Straps should be anchored to the wall with heavy lag type bolts or expansion studs in concrete. The Straps should also contact the floor or a spacer to transfer the weight of the rack from the wall to the floor. Straps should be placed no farther than 36" apart to properly support the weight of the lumber.For more info, visit woodcraft.com!142673 24" strap .......................................$12.99142674 55" strap .......................................$24.99142675 10" bracket ..................................... $7.99142676 14" bracket .....................................$9.99142677 18" bracket ...................................$15.99

Lumber�Rack�Set. All the straps and brackets you need to efficiently store a variety of 8-foot lengths of lumber. Includes: three 24" and three 55" straps; three 10" brackets, six 14" brackets and six 18" brackets. Set does not include mounting bolts.131189 complete set Save Over $65! $224.99

WERA��

Professional�ScrewdriversNow you can upgrade your shop tool “basics” with these professional grade screwdriv-ers. German based Wera Tools has been leading the field with quality and innovation for over 70 years. Their revolutionary hardened steel Lasertip® etching actually grips the screw recess when engaged, reduc-ing the chance of the tip slipping from the fastener. Ergonomically designed Kraftform® handles have hard and soft zones that provide optimal torque with less user fatigue. Note: The smaller Slotted, Square Drive and Micro Drivers do not feature Lasertip®®. *Denotes items included in set.150457 slotted 3x80mm w/o laser tip ..... $3.50150458��*slotted 4x100mm ........................ $5.99150459 slotted 5.5x125mm........................$7.99150460��*slotted 6.5x150mm ..................... $9.99150461�� *phillips #1x80mm ....................... $6.99150462��*phillips #2x100mm ..................... $9.99150463 phillips #2x200mm .................... $11.50150464 phillips #3x150mm .....................$14.50150465 pozidriv #2x100mm ...................$10.99150466��pozidriv #3x150mm .....................$15.99150467��*square #1x80mm w/o laser tip . $6.99150468�� *square #2x100mm w/o laser tip $9.99150471��*plastic rack for screwdrivers ....... $2.50

Screwdriver�Sets150470 Wera screwdriver 6-pc. set* w/Rack ..... Save Over $16.00! .........................$35.99150469 Wera Micro Screwdriver Set .......$29.99

6-pc. set

Shop Accessories


3rd�Hand�And�Little�Hand�Heavy�Duty�Support�SystemsIf you ever wished you had an extra hand... here it is. The 3rd Hand and Little Hand provide support, brace, or clamp whenever you need an extra hand. Use them to mount wall cabinets above a counter or bench. The 3rd Hand’s articulating foot will pivot to support crown molding and cornices at an angle and adjusts from 5' to 12'. The Little Hand extends from 15.7" to 24.4" and has 6" x 6" Universal feet top and bottom for maximum support of cabinets during installation. Each unit has a 150 lb. load capacity. As a base, the Universal BigFOOT acces-sory provides a large 6" x 6" non-slip surface to allow the 3rd Hand to free-stand. Attaching it to the top of the 3rd Hand results in a larger non-pivoting head for holding objects square against upper surfaces.144852� (A) 3rd hand.............................$39.99144853� (B) little hand .......................... $32.50145538� (C) universal bigfoot .................. $5.99829122 carry case for (4) 3rd hands .. $37.99148411� laser mount .............................$19.99

A B

C

NAIL�JACK�ToolsThese are the first hand tools ever designed solely for the purpose of digging, gripping and extracting fasteners such as nails, staples or brads. Whether you need to dig big nails out or carefully remove headless brads from the front or the back of your material, the 11" Nail Jack™ and 81/2" Hunter™ brand nail pullers will do the job quickly, effectively and efficiently.149981 (A) Nail Jack .................................$29.99149982 (B) Nail Hunter .............................$24.99�

B

A

41

B

C

A

Dead�Blow�MalletsThese mallets fea-ture a non-marring head which is shot filled to deliver a solid, no bounce strike. Perfect for assembly and dis-assembly opera-tions and available in three sizes. 15F16 (A) 10 oz ......................................... $11.9915F17� (B) 14 oz ..........................................$16.9915F18 (C) 28 oz ..........................................$20.9915F20��Set of three .................... Save�$9��$39.99

Non-Electric�Branding�Iron

Electric�Branding�Iron

Branding�IronsWe offer a variety of styles to meet your workshop needs. Clear brands can be made in wood, leather, cork, or canvas. When ordering please neatly print on the order form the imprint you want. When count-ing characters, include periods and extra spaces. Capital letters only. Since each iron is custom made, we cannot accept cancellations or returns unless defective. Allow 6-8 weeks for delivery

Electric�Branding�Irons�Feature ceramic-insulated, nickel-chrome heating elements which deliver up to 955°F heat. Positive grip, heat-resistant handles keep hands cool. Rated 125 watts, 120 VAC with 2 wire cord set 4' 6" long. Solid brass heads are individually engraved with 3/16" high capital letters and numbers (except logo/sig-nature model). Allow 6-8 weeks for delivery.

(A)� Electric� Logo/Signature� Branding� Iron. Have your distinctive design engraved. Note: very small details cannot be reproduced. Send clear black and white camera ready artwork to fit a 1" high x 23/4" wide, 11/2" x 2", or 13/4" x 13/4" area.49D13 ................................................... $234.99

(B)�“Handcrafted�By�...”�Branding�Irons. Add your name on the second line and proudly mark every-thing that leaves your shop! Available with up to 20 characters on 2nd line. Print the name you want on the iron clearly on your order form or just tell the operator when you call.49D11 electric model ..............................$89.9949E12 non-electric model ......................$69.99

(C)�Personalized�Electric�Branding�Iron for two or three lines of your copy. Each line can have up to 20 characters for your name, address, special message or instructions. All capitals, letters, or numbers.49D14 2 line branding iron.....................$99.99129219 3 line branding iron...................$119.99

Storage�Case for electric and non-electric branding irons. Plastic 121/2" x 41/2" x 13/4".15M22 ......................................................$12.99

Branding� Iron� Date��Attachment� allows you to date your projects. Kits may be used with non-electric branding iron (49E12) and come with numbers for the years 2001 through 2032.

Complete with instructions, attachment heads and all necessary screws.123038� non-electric ................................. $47.99

(D)�Branding�Iron features 3/8" engraved letters or numbers on a brass head. Plated steel shaft and hardwood handle keeps your hand cool when heating on open flame (propane torch, charcoal grill, fireplace, etc.). Available in 1 to 12 characters, one line only.49A11 1-3 letters/numbers .....................$29.9949A14 4-6 letters/numbers ................... $34.9949A17 7-9 letters/numbers .....................$39.9949A20 10-12 letters/numbers.................$44.99

(E)�Electric�Initial�Branding�Iron�Kit features a solid brass head with up to three 3/16" capital numbers or letters. Includes storage case and three accessory tips for general purpose soldering and burning. 900°F tip, 110 volts. Extra heads with your choice of brand simply screw into iron.49A30 complete kit Save Over$30! ......$49.9949A25 branding iron only ........................$42.9949H13 extra head only ............................. $37.99

D E

3/16"�High

A

B

C

TREND™�Tool�&�Bit�CleanerExtend the life of your tools with this industrial strength non-toxic, biode-gradable, wood resin remover. Per-fect for blades, bits, files, wrenches, etc and anything that comes into contact with wood. The cleaner has unique properties for breaking the molecular bond and lifting the dirt and debris from all surfaces as opposed to dissolving the material like other cleaners. 150899�18 fl.oz. .............$11.50

BLAKLADER�Kangaroo�Vests�are made of soft 8 oz. cotton twill for comfort and durability. Featur-ing “more pockets than a herd of kangaroos” so your tools and gear are always close at hand. The two breast pockets have safety straps and a cell phone pocket, the front waist utility pockets are divided into 5 separate compartments, and there are two large hip pockets. Triple-stitched seams and no bottom seam pockets protect against rip-outs, and the concealed zipper features can be expanded 3" for use over heavy clothing. Note:�Euro�sizes�listed�run�approximately�one�size�small.149217� L ................................................... $51.99149218� XL ................................................ $51.99149219� XXL .............................................. $51.99149220 XXXL ............................................ $51.99

Shop Accessories


Gorilla�Gripper®Moving plywood, drywall or any sheet goods has just become easier. Simply slip Gorilla Gripper® over the center of the panel and lift. The leverage created by the weight of the panel and the unique jaws of the Gorilla Gripper® make it easy for one person to carry a panel. No more strained muscles or blindly bumping into everything in our shop!842598 ......................................................$49.99

42

CustomLaser�EngravingCustomize or personalize your tools with our new laser engraving service. Prices are per line engraved. We will choose the location of the engraving unless you specify your preference. Quantity pricing is for 5 or more duplicates of the same message. Since each tool is custom engraved, we cannot accept cancellations or returns. Per Line 5+Lines 149258 (A) ...............................$1.99�........ $1.79149259 (B) ...............................$1.99�........ $1.79149840 tools purchased from Woodcraft .......... ....................................$1.99�........ $1.79149841 other tools ................$2.50�........$2.25

A

B

Catalog�items�with�this�logo�can�be�laser�engraved.

Traditional�Bench�HoldfastsLarge� Bench� Holdfast. The long reach and large holding pad of this holdfast allow you to quickly clamp or release everything from small boards to large carving blocks. This method of clamping is perfect for projects that need frequent reorientation while planning, carving or working. Simply position the clamp in a 15/16" hole and give it a hard, solid hit with a mallet. To release, just hit the back side of the clamp. Heavy duty ductile iron head featuring a 71/2" throat, 7/8" round steel shank with an overall length of 161/4".Small�Bench�Holdfast. Similar to above but made from solid ductile iron with a 31/2" throat, an overall length of 81/4" and a 5/8" round shank. Each 2+145479� (A) large holdfast $27.99 .........$25.19145480� (B) small holdfast $13.50 ....... $12.15

Engraved�Satin�Brass�NameplatesNameplates are sol-id brass, with a soft satin finish. Lacquer coating keeps the brass shiny for years. Includes brass pins or screws.

Clearly print your inscription (any message you want) on the order blank. Max. 20 characters per line, including letters, numbers, periods and spaces. Specify capital or lower case letters. Since each plate is custom engraved, we cannot accept cancellations or returns. Quantity pricing is for duplicates of the same message. Lines of Copy Per Plate 5+ EachSmall�Satin�Brass�Plates measure 1/2" x 3".145873 1 line .....................ea.�$3.99 ...... $3.50145874� 2 lines ...................ea.�$4.50 ...... $4.00

Large�Satin�Brass�Plates measure 1" x 21/2".145875 1 line ......................ea.�$4.99 ...... $4.50145876� 2 lines ...................ea.�$4.99� ...... $4.50145877� 3 lines ....................ea.�$4.99 ....... $4.50

GLaser�Engraved�Shop�SignCustomize your business or shop with a one of a kind, laser engraved sign. Choose either cherry or oak, select block or script font type, engrave one or both sides, and add your choice of decora-tive embossment. Embossment choices include (C) hand plane, (D) hand saw, (E) claw hammer, (F) chisel/mallet, or (G) saw blade. Each sign may contain three lines of horizontal text (up to 18 characters per line) and up to two embossments per sign side. Signs are 3/4" x 6 "® x 24".149705� (A)�oak, engraved one side .........$79.99149707 (B) cherry, engraved one side .... $79.99149715 cherry, engraved two sides ......$149.99149716�� oak, engraved two sides...........$149.99149704� oak laser sign board ...................$19.99149706� cherry laser sign board ...............$22.99

D E

BC F

A

ZERUST®

Vapor�Corrosion�Inhibiting�EmittersProtecting your investment in fine tools has never been more important and corrosion, especially rust, can quickly ruin a tool. Zerust® VCI’s Emitters help make this struggle a little easier by emitting a chemical vapor that coats all metals preventing corrosion of any kind - your steel from rusting and your brass and bronze from tarnishing. Even if you live in an area with high humidity, you’re still protected because the VCI molecules are heavier than the moisture molecules on metal so they displace them, coating the metal and preventing cor-rosion. Designed for protection in enclosed spaces, these emitters have an estimated life span that is reduced by how often the protected area is opened. Each Emitter has a coverage area or application - be sure to follow the recommendations on coverage area. FDA approved.

The VC2-1 coverage area is a radius of 2 feet from capsule placement for up to 1 year. Great for tool boxes, safe deposit boxes, small safes and drawers.149662� (A)�VC2-1�........................................ $6.99

The VC6-2 coverage area is a radius of 6 feet from capsule placement for up to 2 years. Great for larger areas like cabinets and closets.149661 (B) VC6-2 ......................................$29.99

Zerust®®�Drawer�Liners serve the dual purpos-es of keeping shelves, drawers and tools from damaging each other while protecting the items stored upon them from corrosion. Estimated life span 5 years. Liners can be trimmed to fit.149663 12" x 72" ......................................... $8.99149664� 22.5" x 118" .................................$19.99�

A

B

WoodRiver®

Dual�Power�LED�Shop�LightThis 7 LED light can go anywhere in your shop and is excellent for providing task light-ing. Great for scroll saws, band saws, drill presses, reading and just about anything else you can think of. Uses AAA batteries (not included) or it can be plugged into any standard 110V outlet. A very strong magnet permits application to any steel or iron surface or clamp it on any surface up to 21/2" in thickness. Perhaps the greatest feature about this light is the 10" gooseneck that can be bent in any direction and stays where it’s pointed! Comes with a 110V transformer and base.149727 ......................................................$29.99

Leg�Up™Getting sheet goods up onto your table saw can be a real pain in the back! With the Leg Up™ Panel-Lift you can perform this task quickly and safely since this tool uses leverage, not strength, to lift cumber-some sheet goods. The Leg Up™ mounts quickly and easily to the edge of your saw’s table or to the fence rail and you are ready to go. Simply place bottom of panel in the ‘hook’ and rotate or ‘flip’ the panel onto the table saw. Mounting hardware included. USA.842599 ......................................................$49.99

Blade�And�Bit�Cleaning�Brush�Everyone knows keeping your bits and blades free of resin buildup means longer edge life and cleaner cuts. There are a number of chemical products designed to loosen the resins but nothing to really help clean the cutting edges...until now! Short white china bristles, stainless fer-rules and wood handle combine to make a durable yet inexpensive brush designed to help you scrub off resin buildup. Each package contains 5 brushes.149631 ..................................$4.99

Vises & Clamps


Magnetic�Or�Clip-On�Base�Work�LightI n t e r c h a n g e a b l e magnetic and spring-clamp bases allow you to use this light almost anywhere! The 360° swivel head and jointed arm adjust to light any work area with up to 60 watts. Complete with 18-foot cord, heavy-duty switch, vented metal reflector shield and “bird cage” bulb protector. Bulb not included. Shop Tip: We screwed metal, electrical junction box cover plates to walls and joists around the shop and garage to utilize the magnetic base on non-magnetic surfaces.09L06 .........................................................$30.99

Corner�ClampPerfect for picture framing, this clamp has a 41/2" capacity with a 11/4" high clamping surface. Whether you're simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees. This is a rugged, precise clamp with a saw slot to allow you to make your final miter trim while firmly holding the stock in position. Durable cast iron construction with steel Acme threaded vise screws and two countersunk mounting holes for permanent installation on the bench.145962 ......................................................$29.99

Picture�Frame�Miter�ClampEasily clamps all styles of picture frames up to 48" x 48". Plated rods are fully threaded and thumb nuts make accurate adjustments of the corners quick and easy. Also clamps small boxes and furniture.07S51 ........................................................ $21.9907S51C extra corners (4) .............................$3.99

Self-Squaring�Frame�ClampTightens all four corner joints equally and simul-taneously with just the turn of a central wing nut. Jaws leave joints visible for inspection, easily adjust to accommodate frames from 5" x 7" to 26" x 30". Aluminum with glue-resistant plastic jaws.08A62 .........................................................$30.9908A62C�extra corners (4) ..............................$3.99

Spring�Miter�Clamp�SetThe quickest and easiest way to clamp mitered corners! Great for moldings and trim. Simply choose the appropriate size spring clamp and use the spreader to open and position the clamp. Kit includes spreader, 8 each of 3/8"-5/8", 5/8"-1”, 3/4"-11/4", 11/2"-13/4", 2"-23/4", and 21/2"-31/2" spring clamps and a form-fitted case.145691 ....................................................... $57.99

WOODPECKERS®�Clamping�Square�&�WedgeThese machined aluminum Clamping Squares are 6" x 6", 3/4" thick, and 1" wide. Mini Clamping Squares are 23/4" x 23/4", 3/4" thick, and 3/4" wide. The Clamping Wedge mates up per-fectly with the Clamping Squares to create a fixture for forming miter joints. You can maintain positioning and alignment by attaching the Wedge to a toggle clamp with a threaded stud. Each side of the wedge is 33/4". All squares and wedges are anodized. USA.147530� (A) clamping square (2) ............... $34.99147531 (B) clamping wedge (2) ................$24.99143936� straight-line toggle clamp ............$12.99147850 mini clamping square (2) .............$24.99

A

B

Quick�ActionToggleClampsInstall on jigs, tool fixtures, or move-able bases so they can be quickly set and engaged to hold your work. Three different styles, each complete with adjustable rub-ber pressure tips. Mounting screws are not included.(A)�Vertical�Handle�Toggle � Clamps apply vertical clamp-ing pressure with handles that lock in a vertical/up position. Best used when positioned away from the operator; handle can be pulled up into locking position, or pushed back to release. Lbs. Holding L x H Capacity Closed Each 4+144312 100 .... 21/8" x 31/8" ....$10.99 ...... $9.89143934 200.......23/4" x 4" ..... $11.99 .... $10.79144313 500 ......43/4" x 6" ......$15.99 ....$14.39143935 750 .....53/4" x 71/2" .....$17.99 ....$16.19

(B)�T-Handle�Vertical�Toggle�Clamps are constructed exactly like the vertical toggle clamps but have a lower profile T handle for easier gripping both in front of and behind the jig or fixture.143937 200.........3" x 3" ........$14.99 ....$13.49

(C)� Low� Silhouette� Toggle� Clamps provide verti-cal clamping pressure with locked handles in a horizontal/down position. Useful where clear work space is required. Lbs. Holding L x H Capacity Closed Each 4+143938 200.......6" x 13/4" ..... $11.99 .... $10.79143933 500 ... 61/2" x 13/4" ....$16.50 ....$14.85144314 750 ....113/4" x 21/2" ...$15.99 ....$14.39

(D)�Straight�Line�Toggle�Clamps are for push clamp-ing operations such as keeping stock tight against fences for drilling or cutting.143936 300 ... 63/4" x 31/4" ... $12.99 ... $11.69

D

A

C

Large�clamps�A,�D�&�C�shown�in�closed�positionSmall�clamps�A,�B�&�C�shown�in�open�position

Quick Clamping ActionAdjustable Pressure

B AC

Fluorescent�Magnifying�LampThe cool, glare free fluorescent light and large optical quality lens make it easy to work on small projects without straining your eyes. A 22 watt fluorescent bulb encircles the large 43/4" magnifying lens so you can see the finest details, without the heat an incandescent bulb produces. The spring balanced arm allows up to 45" of reach. Can be clamped to any surface up to 21/4" thick.140561� �..................................................... $69.99

Vises & Clamps


JORGENSEN�“Pony”�Pipe�ClampsPony clamps are made in the USA and designed to be used on standard 3/4" or 1/2" black pipe (not included) to offer the flexibility of creating any clamping length. Both sets incorporate standard Acme cut steel threaded screws for a securing hold and final tightening. The tail-stop features a multiple-disc-clutch for fast easy adjustments while holding work securely. Sets include one each head and tail units. Each 3+15I01 clamp set for 3/4" pipe ....... ...............$18.79 .... $16.9115F31 clamp set for 1/2" pipe ........ ...............$12.99 .....$11.6915I06 clamp pads (2 pair) ............ .................$5.50 .......$4.95

Big�Jaw�Pipe�Clamp�FixturesOur Big Jaw Clamps are made of heavy-duty ductile cast iron, feature a big 7" reach and have multiple-disc clutch plates for ease of adjustment and quick release. Use when more then just pressure along an edge is needed, such as veneering or gluing up large turning blocks. Screw mounts to any 3/4" standard threaded pipe. Pipe not included. Each 4+145526�� ............ $21.99 .... $19.79

Rapid�Action�Band�ClampSecures�Workpieces�In�Seconds! The ratchet action mechanism needs no tools for operation, tightening the clamping band easily and releasing it at the touch of a lever. The 1" wide nylon web band exerts a steady 1500 lbs. of pressure on your workpiece. Each 3+

08F61 15' clamp ....$9.99 ...$9.00111210 25' clamp $12.99� $11.70

Adjustable�Alloy�Bar�ClampsThese bar clamps are made of high quality extruded aluminum for both light weight and strength. The head of the clamp is riveted for rigidity and the adjustable foot wraps fully around the bar for tight clamping action. Detents are spaced 5/8" apart for quick adjust-ments. The clamp sits upright and is well balanced for ease of use. These clamps have a large “wing” type knob for good clamping pressure without causing fatigue. Each 6+811661 24" ........ $27.99 ... $25.19811662 36" ........$29.99 ... $26.99811663 48" ........$32.99� ... $29.69

JEVONS�3D�SquaresThese heavy aluminum jigs are machined square to within .002" along the entire 6" leg, and designed to easily clamp on to a project mak-ing it simple to square up corners. Six inch long sides give plenty of clamping room so that when square is reached, it is kept until gluing and fastening is complete. Use for squar-ing up carcases, bookcases, or as part of a jig on a tablesaw. They make great holders/braces for high auxiliary fences for cutting raised panels. Each leg has countersunk screw holes to facilitate easy jig assembly. Once you have them, you’ll discover more uses almost daily. Sold as a set of two. Each Set 2+ Sets

144041 ..............$32.99 .... $29.99

Vise�With�Angle�AdjustmentThis handy drill press vise features precision ground dovetailed trun-nions that ensure smooth operation and accurate adjustment to any angle from 0° to 90°. Solid cast-iron construction provides added stability. The base is designed to facilitate an endless combination of mounting options, perfect for those difficult drill press applications. Jaw opening measures 31/4".143185� ..............................$44.99

PINNACLE®®�Cam�ClampsThese versatile, maple clamps are widely used by furniture restorers, cabinetmakers, luthiers and hobby-ists. Light in weight with a quick cam action that produces 330 lbs. of pres-sure when fully cocked. Bar is made of spring steel, all sizes have cork faces to prevent marring and staining. Made of lacquered maple. Throat Open Each 3+ Depth Capacity123262 41/2" 8" $17.99�$16.19123263 6" 8" $17.99�$16.19123264 81/2" 8" $18.99�� $17.09123265 41/2" 16" $19.99�� $17.99123266 41/2" 24" $24.99��$22.49

Heavy-Duty�T-Bar�ClampsThese imported clamps are best suited for heavy-duty work, but will work in practically any clamping application. Their cast-iron heads are tapered 11/2° for true parallel clamping action. The main screw and handle are made of a high grade steel and the T-bar section steel is rolled dead straight. Capacity Each 4+141092 30" .... $28.99 .....$26.09141091 42" .....$30.99� ..... $27.89141090 54" .....$33.99 .....$30.59

Corner�Band�ClampPicture frames, hexagon, circular and just about any other shape, can be securely held with this clamp. The 6' nylon strap is neatly contained in its own reel, and 4 variable angle pads allow virtually any shape to be clamped. Just fit the strap around your work, flip the strap locks and turn the clamp handle to apply pressure equally around your project. Extra corners are available for projects with more than four sides.141115� .................................$18.99141211��extra corners (4) ....... $5.99

Pinch�Dogs�Pull�Joints�TogetherWhen driven into end grain along a joint, these simple steel “clamps” draw boards tightly together for gluing up panels, table or bench tops, and can be used again and again. Pack of 10.140113� 11/2" ........................ $19.99140114� 2" ............................ $29.99

WoodRiver®

Universal�ViseThe 31/2" wide by 21/8" high jaws have a 5" open capacity, in either a vertical or horizontal posi-tion. The faces are drilled to accept wood facings, there is a small anvil, and the vise rotates 360° on its base, locking tight as soon as an item is secured in the jaws. Bolt holes in the base legs make it easy to attach the vise to a bench top. 144592 ..................................$51.99

Professional�Miter�ViseOur Professional Miter Vise is designed for picture framers, where accuracy and precision are critical. Clamps boards and molding up to 4" wide for nailing or gluing. Rotates 90° and locks at any position between 0° horizontal and 90° vertical. Features a saw slot at the apex of the 45° angle for final “in-position” trimming of a joint. Inside jaws and vise table are cast iron with steel vise screws and knurled aluminum cylinder handles.03W55 ................................... $59.99

Vises & Clamps


BESSEY�Tradesman™�

Bar�ClampsThe original Bessey de-

sign is unmistakable with its patented non-slip locking

mechanism. It has greater holding power than any

“clutch- style” clamp. Other features include corrugated

cast jaws; high quality galvanized profiled rail, coated oversized

acme thread, and large ergonomic wood handle and glue re-sistant non-marring plastic caps.

Tradesman�Medium�Duty� Clamps with 1" x 1/4" rail size and nominal clamping pressure of 600 lbs.

Capacity Throat Depth Each 6+141413 6" .........21/2" .......... $12.99� ......$11.69141414 12" ........21/2" .......... $14.99� ......$13.49141415 18" ........21/2" .......... $15.99 ......$14.39141416 24" ........21/2" .......... $18.49 .......$16.64141417 30" ........21/2" .......... $20.49 ..... $18.44141418 36" ........21/2" .......... $21.49 ......$19.34

Tradesman�Heavy�Duty�Clamps�with 1" x 5/16" rail size, and nominal clamping pressure of 800 lbs. Capacity Throat Depth Each 6+141419 8" ............4" ..............$23.49 ..... $21.14141420 12" ..........4" ..............$29.49 ..... $26.54141421 16" ..........4" ..............$33.49 ......$30.14

Tradesman�Extra�Heavy�Duty�Clamp with 11/4" x 3/8" rail size and nominal clamping pressure of 1320 lbs. Capacity Throat Depth Each 6+141422 12" ........ 51/2" ...........$33.49 ......$30.14143782 repl pads small (4) ....$7.50143783 repl pads large (3) .... $6.50��

Edge�Clamps increase the versatility of sliding bar clamps. Each 6+141516 (A) single screw .......$13.99� ......$12.59141517 (B) double screw ......$16.99 ..... $15.29

MaxFlex�Series�Bar�Clamp. Omega bend dampens the impact of external vibrations while clamping. Slid-ing pin handle with 1100 lbs. nominal clamping force. Capacity Throat Depth Each 2+149980�� 12" ...........51/2" ........$56.99 ........ $51.29

Mighty�Mini™. A general-purpose clamp that does the work of a 1", 2", or 3" C-Clamp, but nine times faster. Clamping pressure of 330 lbs. Capacity Throat Depth Each 6+130926 4" ............... 2" ............. $7.50 ........$6.75

A

B

BESSEY�F-Style�Bar�Clampshave cast heads, coated steel bars, wooden handles and swivel pads. Bar size is 1/4" x 3/4". Capacity Throat Depth Each 6+146980 6" ......... 21/2" ......... $10.50 ..........$9.45146981 12" ........ 21/2" .........$12.99 ........ $11.69146982 18" ........ 21/2" ......... $14.50 ........$13.05146983 24" ....... 21/2" ......... $16.50 ........$14.85146984 30" ....... 21/2" .......... $17.50 ........ $15.75

Bar�Clamp�Set. 2 each 12", 24", and 30" clamps.146973��set of 6 Save Over $15 ............ $74.99

Double� Headed� Bar� Clamps. Fixed jaw with two clamping surfaces to distribute force over larger area. Capacity Throat Depth Each 6+838432��12" ........ 31/2" ........$13.99 ........$12.59149957�� 24" ........ 31/2" ........$15.99 ........$14.39

Heavy�Duty�Bar�Clamps. Similar to above but with a 31/2" deep throat and heavier bar (5/16" x 7/8"). Capacity Throat Depth Each 6+146985 12" ......... 31/2" ........ $16.50 .........$14.85�146986 18" ......... 31/2" ........ $19.50 ......... $17.55146987 24" ........ 31/2" ........ $25.50 .........$22.95

Deep� Throat� Heavy� Duty� Bar� Clamps. Same as Heavy Duty Bar Clamps but with a 5" deep throat. Capacity Throat Depth Each 6+842371��12" .......... 5"............$26.50 ........ $23.85842372��18" .......... 5"............$30.99 .........$27.89149956��24"........... 5"............$34.99 .........$31.49

BESSEY�KliKlamp®�Ratcheting�Bar�ClampsRatchet action controls clamping with an ergonomi-cally shaped clamping arm made from fiberglass-reinforced polyamide. Fixed and sliding arms made from magnesium are extremely light and strong. Fixed arm with V-grooves holds round, pointed or angular shaped work pieces firmly. Complete with plastic cap to protect workpiece. Each clamp has a throat depth of 3" and a clamping force of 260 pounds. 4+144360�� 4" ............................. $24.99 .......$22.49144361 8" ............................. $25.99 .......$23.99144362 12" .......................... $26.99 .......$24.29

BESSEY�H-Series�Pipe�Clamp�FixturesThe unique foot de-sign provides dual-axis stability, and the long legs raise your project off the work surface so tightening the clamp is easier. The large handle provides positive pressure while the “clutch” action grips the bar automatically. Each 4+147891 1/2" fixture ..................$17.50........ $15.75147892 3/4" fixture.................$18.50........$16.65

Threaded�3/4"�Black�Pipe for use with Bessey 3/4" H-Series Pipe Clamp.124397� 3/4", 30" .........................................$18.99124398� 3/4", 40" .........................................$24.99124399� 3/4", 50" .........................................$30.50

BESSEY�LMU�Series�Light-Duty�Bar�ClampsThis new light-duty bar clamp has a U-shaped rail that enables step-over clamping for those hard to reach spaces. The sliding arm is made of die cast zinc which is light, stable and break resistant. The plastic pressure caps on the top and bottom sec-tions protect the work piece surface. Throat depth is 2", with a clamping force of 330 pounds. 4+149525� 4"� ............................. $5.50.......... $4.95149526� 6" ............................. $6.50.......... $5.85149527� 8" ............................. $6.99.......... $6.29

BESSEY�K-Body®�REVO™Fixed�Jaw�Parallel�ClampsThe large, flat parallel clamping surface made of impact and break resistant polyamide comes with 3 replaceable pressure caps that are glue, paint and grease resistant. Internal frame ensures accurate 90° angles which are very sturdy even at maximum pressures. Large, comfortable 2-component com-posite handle with soft plastic insert for a more comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate workpiece from the rail. Removable end rail clip ensures clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader. Vario REVO clamps replace the fixed jaw with a wider sliding jaw that can now be place anywhere on the bar with a push of the release button. Use KP blocks to create an efficient rail and style clamping system. Acces-sory Tilting Jaws slide over the REVO clamp heads and pivot ±15° for securing non-parallel edges. TK6 Table clamps use the integral mounting holes in rail protection pieces and end rail clip to anchor the REVO in position for repetitive work. Additional clamp jaws with spindles and Vario sliding jaws are available to double or triple the clamping positions on your longer K-Body REVO clamps. Single Pair12" REVO 149053�... $37.99� 149516�.....$75.9824" REVO 149054�.. $38.99� 149517�......$77.9831" REVO 149055�.. $42.99� 149518�.....$85.9840" REVO 149056�.. $48.99� 149519�..... $97.9850" REVO 149057�... $51.99� 149520�...$103.9860" REVO 149058�.. $59.99� 149521�...$119.9840" VARIO 149958�.. $58.49� 149959�...$116.9860" VARIO 149960�.. $66.99� 149961�...$133.9803W68 KP block set, 4-pcs....................$28.50842045 tilting jaws, pair..........................$15.99842283 TK6 table clamps, pair .................$7.50842279 jaw protection pads, pair.............$8.50842281 rail protection pieces, pair ..........$5.50842280 end rail clip, single.......................$5.50149962 jaw clamp spindle..................... $26.99149963 sliding jaw end........................... $16.99

BESSEY�Vario�Strap�Clamp�With a 23' long x 1" wide, high-tensile strength polyester “no stretch” strap that winds up for safe and easy manage-ment, and four unique “vario-angles” that exert continuous pressure on the joints, this is more than just a strap clamp. Special winding gears at the head of the threaded spindle draw the strap evenly from both sides. Additional vario-angles are available in sets of 6.127924 strap clamp ..................................$40.99127933 vario-angles (6) ............................$15.99

Vises & Clamps


JORGENSON�ISD3�ClampsISD3 clamps feature a unique expandable design which allows two clamps to be combined into one single clamp. This allows the user to add an additional 6" of clamping length to their bar clamps when combined by using a quick release knob for easy changes to the expanded or reversible position. These clamps also offer a 76% increase in clamping pressure over the 500QC QuickGrip series clamps. The ISD3 still feature the “Dual Durometer” handles and are truly a “Woodworking Capable” clamp.152178��6" ....................................................$18.99152179��12" (shown) ....................................$20.99152180��18" ..................................................$23.99152181��24" .................................................. $27.99152182��36" .................................................. $31.99

46

BORA�Wide-Track�Clamp-Edge�Tool�GuidesMore than just a wider version of the original Clamp-N-Cut edge guides. The improved clamp design complements the 33/8" wide rigid guide extrusion that includes 1/4" T-tracks on both sides of the top surface. These clamp guides also have a larger contour grip with integrated hang-hole for convenient storage. Same swivel head design as the previous model these guides can be skewed across surfaces at angles up to 221/2°. Sizes denote maximum clamping capacity. Saw Guide minimizes binding by keeping your saw accurately aligned with the cut. Auxiliary clamps turn your Wide-Track into a simple back-to-back clamp.149973� 42" wide-track clamp-edge .........$59.99151244� 50" wide-track clamp-edge .........$69.99149974� 66" wide-track clamp-edge .........$84.99151245� saw guide for wide--track ............$34.99151246� aux. clamps for wide-track ...........$17.99

C

AB

WoodRiver®®�Clamp�GuidesCombine a rigid guide rail with an internal clamp eliminating the need for c-clamps or hold-downs. Use any of the clamp guides with your circular saw to cut sheet goods to a manageable size or guide your router for dadoes. Clamp guides are the perfect fence for your band saw, drill press or router table. Clamp guides are extruded aluminum rails that act as tool guides while housing clamping components and also include tape measure scales and integral T-Track slots that allow the use of the Universal Base or shop-made guides and jigs. Back-to-Back Clamp Guides have bottom jaws that attach to any workbench, tabletop or work surface while top jaws clamp the workpiece firmly. Low profile clamp pads reduce interference while sawing, routing or sand-ing. The Extra-Wide Clamp Guide has the widest rail extrusion for ultimate rigidity with additional T-Track and guide slots. The Clamp Guide Universal Base features a 111/2" x 63/4" plate, that slides precisely in the T-Track slot found on all of the clamp guides, is perfect for mounting your circular saw or router. 149190 (A) clamp guide, 24" ....................$29.99149191 (A) clamp guide, 36" ....................$34.99149192 (A) clamp guide, 50" ....................$39.99149193 (B) back-to-back guide, 36" .........$49.99149194 (B) back-to-back guide, 50".........$59.99149195 (C) extra-wide guide, 54" .............$59.99149196 clamp guide universal base .......$29.99

BORAPistol�Grip�Bar�ClampsPistol grip style quick acting clamp features ergonomically designed handles that fit comfortably in your hand. High strength, light weight composite body with soft grip clamping pads feature a V-groove for round objects. 2" throat depth with 330 lbs. clamping force. Clamp can be reversed for spreading. Each 4+149900�6" ............................... $13.99�......$11.99149901� 12" (shown) ............... $15.99�......$13.99

BESSEY�EZS�One-Handed�Quick-Action�Bar�ClampsThis extremely sturdy original BESSEY one-handed clamp EZS is perfect for all work that needs to be carried out with one hand – overhead tasks, or if the other hand is needed for aligning purposes. Sophisticated technology makes it possible for single-handed clamping and spreading of work pieces with up to 440 lb. clamping force. The upper section can be quickly converted from clamping to spreading without the need for tools or releasing screws. An ergonomically shaped 2-component plastic handle with pump lever is positioned behind the rail, enabling a powerful grip. Soft pressure caps provide material protection and secure clamping. Capacity Throat Depth Each 4+845103� 6" ........... 31/8" ......... $20.50�...... $18.45845104� 12" ......... 31/8" ......... $22.50�......$20.25845105� 18" ......... 31/8" ......... $25.50�...... $22.95845106� 24" ......... 31/8" ......... $28.99�......$26.09845107� 36" ......... 31/8" ......... $33.99�......$30.59

WOODPECKERS®®�Clamp�RacksThe Light-Duty�Clamp�Rack with a capacity of up to 23 clamps, has 1/4" wide slots to fit most F-style clamps. The Heavy-Duty� Clamp� Rack has welded construction, will hold up to 18 clamps, the 1/2" wide slots will fit most bar and parallel style clamps. Pre-drilled mounting holes are on 16" cen-ters. These racks will not fit pipe clamps. Clamps not included. U.S.A. Each 2+148548� light-duty rack, 24" ...... $19.99.....$17.99148549� heavy-duty rack, 36" ...$29.99....$26.99

WoodRiver®

Pattern�Maker’s�Or�Gunstock�Carving�ViseThe body of this heavy cast-iron vise swivels 360° so you can always position your work where you need it. The 47/8" wide jaws open to 6", and both jaws swivel so you can clamp virtually any shape. Perfect for holding table legs for shaping or carving. Secured to any bench or table top up to 41/2" thick by a heavy threaded rod (which requires a 3/4" hole) and large winged nut, so it can be quickly set up and removed as needed.142768 .....................................................$119.99

PINNACLE®®Wooden�HandscrewsThese are the classic cabinetmaker®s bench clamps for gluing and assembly. Durable, oiled, hard maple jaws will not mar the work and are less likely to slip than steel jaws. They have a deep throat and can be used to apply a broad area of evenly distributed pressure or concentrated at one point of contact. Drawn carbon steel screws pivot to allow the jaws to grip nonparallel surfaces. Made in USA. Jaw Throat Open Length Depth Capacity 148587 4" .........2" .......21/4" ....................$14.99148588 6" .........3" .........3" .......................$17.99148589 8" .........4" .........5" ......................$20.99148590 10" ........5" .........7" ......................$23.99148591 12" ........6" ...... 91/4" ....................$26.99

BESSEY® Malleable�Cast�C-ClampsThe BESSEY malleable C-Clamp is designed f o r g e n e r a l purpose and light duty ap-plications. The frame is made of malleable iron with bright, rust resistant coating for 3" and smaller sizes and black powder-coating for 4" and larger sizes. Smoothly rolled threads of the spindle have a crimped swivel to adapt to various surfaces and steel sliding pin for use in tight spaces. Capacity Throat Depth Each 4+839107� 11/2" ..........11/2" .......... $2.50 ........ $2.25839109� 21/2"..........13/8" .......... $3.99 ........ $3.59839112� 3" ..............13/4" .......... $4.25 ........ $3.83839114� 4" ..............33/4" .......... $6.99� ....... $6.29839116� 6" ..............31/2" .......... $9.99 ....... $8.99839117� 8" ..............31/2" .......... $14.99 ....$13.49

Vises & Clamps


GRÖZ�7"�Bench�Vise�HardwareThe 7" Gröz Front Vise Hardware m a n u f a c t u r e d from close-grained cast iron features a 3/4" diameter steel main screw with buttress threads and fitted solid steel guide rods that reduce wear and tear, giving the vice hardware a smooth and true parallel action. Main casting and 7" wide face casting are pre-drilled to add jaws and to mount to your workbench. The jaw opens to 83/4" without added components. Includes a finished wooden handle.148446� .................................................... $56.99

WILTON�Woodworker’s�ViseFeatures include a metal housing which fully encloses the screw, prevent-ing sawdust and dirt from “gum-ming” the threads. Front jaw pivots 12 degrees to allow clamping of irregu-larly shaped objects and the entire front jaw can be “lifted” up and locked in place to serve as a full-length dog. Jaw width 4" x 7", max. opening 10", 29 lbs. Complete with mount-ing instructions. Vise shown with optional Magnetic Maple Jaws available below.126504� Wilton vise ..................................$179.99126505� magnetic maple jaw inserts ........$29.99

GRÖZPortableHobbyist�ViseBody and jaws are quality cast-ings fitted with two steel slide bars, an acme threaded main screw, and steel sliding handle. Portable and fea-tures an integral clamp for tops up to 21/4" thick. Pre-drilled holes to permanently mount to a bench. Jaws are 6" x 2", open to 5" and are pre-drilled for wooden faces.141673� .....................................................$32.99

WoodRiver®

Pattern�Maker’s�ViseBecause of their versatility, vises of this type were the center of a pattern maker’s shop for more than a hundred years. Not only can you swing a clamped workpiece up to horizontal, you can rotate it 360° in the vertical position. Rotating gives you access to three sides of a clamped piece, even upside down! The main jaws pivot up to 5° for clamping tapered work, and the furnished auxiliary jaw will pivot up to 30°. Two dogs in each jaw allow clamping of round or irregular shapes. Jaws are 133/4" wide x 5" deep, maximum opening 12". Weight 55 lbs. Complete with wooden handle, mounting instructions and hardware.

Auxiliary Swivel Jaw

Cam Action On Front JawTilts Up 90°

Rotates 360°

Extension DogsHold Rings andAwkward Shapes

JORGENSEN�Rapid-Acting�Bench�Vises�Turn the hardwood handle a half-turn counter -c lockwise and the pivoting nut disengages, allowing you to open or close the jaws to the desired opening in a flash. The machined jaws are toed-in to create the best possible holding power, and included countersunk, tapped holes for custom wood facings if desired. Includes a solid steel front dog to serve as a bench stop for large-project clamping. Appearance of the smaller vise slightly different from larger vise shown in the photo. USA. Face Opening16T51 4" x 7" .......9" ................................$134.9916T52 4" x 10" ... 12"................................$154.99�

GRÖZ��Quick�Release�VisesClose-grained g r e y c a s t i ron means a c c u r a t e l y m a c h i n e d housings for smooth slid-ing and true parallel action, free of side or cross move-ment. The steel main screw has buttress threads for smooth, accurate and responsive adjustment and the body and sliding jaw have provisions for attaching wooden liners. The adjustable front dog of special high-strength plastic protects your tools. 7" vise installs 21/4" below the bench surface, 9" and 101/2" vise installs 27/8" below the bench surface.144844� 7" width, 8" opening�.................$109.99144845� 9" width, 14" opening�...............$146.99147941� 101/2" width, 15" opening .........$153.99

German�Bench�ScrewFavored because of its strength and versa-tility, these are adaptable for many uses: end vises, cider presses, and bookbinder’s presses. 32mm (11/4") diameter screw, length 480 mm (183/4"), screw length 17". Collar and nut are made of malleable cast iron. Made in Germany. Handle and mount-ing screws not included.01H41 .......................................$61.9917E52 handle .............................. $6.99

Quick�Release�Front�ViseFeatures a machined pivoting nut that engages or releases with a turn of the 1" diameter main screw. 20mm diameter guide rods. Screw and body length 19", width 101/2". Made in Germany. Handle and mounting screws not included. 17A11 ........................$214.9917E52 handle ................. $6.99

Economy� Quick� Release� Front�Vise.�Virtually identical to the hard-ware above, but made in China.145444� ...........................$86.99

GRÖZ�Rapid�Action�Woodworking�VisesThese vises feature a unique rapid-action mecha-nism to tighten the vise simply turn the handle in the usual way but as soon as the handle is turned in the opposite direction, the screw is disengaged and the front jaw slides freely. Vise jaws are equipped with a “toe-in” feature so that when fully closed the jaws meet only at the top for even clamping on the whole depth of the work piece. The steel main screw has Buttress threads for smooth and responsive adjust-ment. 7" vise has a 7" wide jaw and 8" opening; 9" vise has 9" wide jaw and 13" opening.148445 7" vise ...........................................$84.99148437 9" vise ........................................$115.49

WoodRiver®

Economy�Bench�Vise�Hardware�Improve your current bench by adding a front vise or use this economical hardware to build a new bench from scratch. We’re sure you’ll find that the rugged castings and precision parts make these economically priced workbench vises a fantastic value. Handle not included.

Small�End�Vise�Slide with 1" dia. x 14" L screw and 4" W x 15" L vise.144806 (A) ................................................. $47.99

Small�Front�Vise with 1" dia. x 10" L screw, 3/4" dia. guide rods and 9" W x 13" L vise.144804 (B) ................................................ $51.9917E46 handle for 144804 & 144806 ...... $6.50

Large�Front�Vise with 13/16" dia. x 151/2" L screw, 3/4" dia. guide rods and 101/4" W x 191/4" L vise.144805 (C) ................................................. $76.9917E52 handle for 144805 & 144807 ...... $6.99

Large�End�Vise�Slide with 11/4" dia. x 171/2" L screw and 4" W x 195/8" L vise.144807� (D) .................................................$79.99

A

BC

D

Workbenches


PINNACLE®

Cabinetmaker Workbenches Based on a Carlyle Lynch design, this modern classic is a testament to Woodcraft’s ongoing efforts to offer our customers the finest selection of wood working tools and accessories. Mr. Lynch designed this bench decades ago while living in the Shenandoah Valley in Virginia. Being a first rate craftsman and a skilled draftsman, he would travel to numerous museums in the south requesting access to study and create dimensional drawings of their 18th and 19th century furniture collections. These drawings would then provide a basis so that future woodworkers would be inspired, to replicate and to improve on their own skills. The particular plan was bought by Woodcraft and sold for many, many years until recently when we were inspired to have the bench built and offer it to our customers.The Pinnacle® workbench is made by skilled crafts-man right here in the USA, constructed from 100% North American Beech. Both front and rear vises are heavy cast aluminum with steel inserts to ensure smooth operation. A wide stable base, connected by two runners, provides support for a laminated

Pinnacle® Bench DogsAmerican made, Pinnacle® Brass Bench Dogs are manufactured to fit a 3/4" diameter hole, and have a 2° negative slope, cross hatched face to ensure that your work piece “stays put”. A wire side spring provides friction necessary to keep the dog in place, while allowing for easy removal and placement in any 3/4" hole. The Pinnacle® Bench Dog measures 43/8" long and the Pinnacle® Bench MiniDog is 23/8" long. Sold in pairs. 151101 (A) Pinnacle® Bench Dog ...............$29.99151075 Pinnacle® MiniDogs .......................$24.99

A

PROFESSIONAL QUALITY TOOLS

Beech top. This bench is fully equipped with a front vise, tail vise, tool tray and numerous bench dog fixtures holes and two brass bench dogs. The bench is topped off with a Tung Oil finish. USA. Small Bench Large BenchHeight: 361/2" 371/2"Length of Worktop: 64" 84"Width of Worktop: 221/4" 251/4"Overall Length: 72" 94"Overall Width: 29" 33"Top Thickness; Center: 3" 4"Top Thickness; Skirt: 3" 4"Vise Opening: Frnt. 10"/Tail 7" Frnt. 10"/Tail 12"Clamping Max. Distance: 72" 82"Bench Weight: 175lbs. 250lbs.Shipping Weight: 200lbs. 275lbs.

150811 72" L X 29" W X 361/2" H ....... $1,499.99**Standard shipping rates plus $55 for excess weight.151074 94" L X 33" W X 371/2" H ...... $1,799.99****Standard shipping rates plus $75 for excess weight.

KREG Klamping TableCombines the versatility of ad-justable locking pliers with the convenience of an extruded aluminum Klamp Trak that is securely bolted to a 1" th ick sup -port panel. Applies an in-credible amount of pressure to the joint line. Perfect not only for use as a pocket hole as-sembly station, but also as a general hold-down while drilling, routing, sanding, and more. Each Klamp Table Top includes two Klamp Table Klamps with 3" throat depth which rotate 360° on the Klamp Traks and can be moved along the extrusions that line the left and bottom sides of the table. The 213/4" x 333/4" Klamp Table Top surface is constructed of Melamine material.

Five Klamp Blocks included with the Klamp Table Top provide the ability to quickly and accurately register the workpiece and bring the project into alignment. Each Klamp Block can be oriented for face frame widths of 11/2", 2", 21/2" or 3" such that the components of the frame can be loaded on the table and held square. The Universal Steel Stand measures 28" wide by 20" deep and adjusts from 32" to 37" in height. Add 6" throat Long Reach Klamp for expanded versatility. Use the 333/4" long Klamp Trak to create your own clamping solutions. The Klamping Table Kit includes the Klamp Table Top and the Universal Steel Stand.Add a 6" throat Long Reach Klamp for expanded versatility. Use 333/4" long Klamp Track to create your own clamping solutions. 148007 Klamp Table top ........................ $249.99148008 universal steel stand ................ $149.99148010 Klamping Table kit .................... $399.98148009 repl. Klamp Table surface ...........$79.99149093 extra Klamp Table Klamp............$29.99 149094 Long Reach Klamp ..................... $34.99148164 Klamp trak, 333/4" ...................... $44.99148165 Extra Klamp blocks (5) ................$14.99148166 universal casters (4) ....................$59.99

WoodRiver® 4-Way Pressure ClampsEliminates Buckling When Gluing Large Panels!WoodRiver 4-Way Pressure Clamps apply equal pres-sure from all four directions (top, bottom, and both sides). Ideal for gluing table tops, shelving, veneer, and laminates. Attach clamps to any length 2 x 2's (a 2 x 4 ripped in half) with screws provided, set jig and turn handle to tighten (on large pieces, position every 12"-18" for maximum clamping efficiency). Clamp has plastic pressure pads and two 191/2" tail bars of tough plastic with 12 notches to handle a variety of stock widths. It can be used on boards up to 6" thick. Comes with complete instructions, 2 x 4’s not included. Replacement “long” and “short” notched plastic clamping bars sold in pairs. Each 3+125392 ............................... $26.99 ......$24.29125398 long bar (2) ...............$4.99 ......... $4.49125397 short bar (2) ..............$2.99 ......... $2.70

Parts includedwith each clamp.

4-directionpressure

LEIGH Hold-DownClampsLeigh Indus-tries has con-verted their proven design of cam-action clamping into a hold-down system that performs equally well as their dovetail jigs. The Bench Hold-Down Clamp mounts in any 3/4" diameter hole and uses a 3/8" threaded rod and speed nut to quickly attach to any table top or workbench (up to 41/4" thick). Bench clamps are

ideal for drill press tables and free-hand routing, sanding or carving. Easily secure jigs and fixtures to bench tops. The Surface Hold-Down Clamp has the same clamping head however rather than clamping through the work surface the included Anchor is recessed in the surface and the clamp slides into a keyhole slot. Anchors are 11/2" diameter and 5/16" thick and are mounted via bolts from below or screws in the work surface. Anchors are available separately so you can use the clamp in multiple locations.149059 bench hold-down ....................... $45.99149060 surface hold-down .................... $45.99149061 clamp anchors (4pk) ...................$19.99

Workbenches


B

Duo 1500 & Nordic Plus Series Accessories:Duo 1500 Storage Cabinet. Similar to the SM04 cabinet, but comprised of one 3-drawer section and a wide, 2-door cupboard. Box is 403/4" long x 181/2" deep x 161/8" high. Assembly required.146473 SM03 cabinet ................................................................................................................$539.99

Nordic Plus Storage Cabinet. Features include two sliding doors with access to a large (241/4" x 15" x 15" open cabinet and four drawers measuring 31/2" x 121/4" x 121/4" each. Entire case measures 383/4" x 18" x 175/16". Assembly required.145267 nordic plus cabinet ........................................................................................................ $169.99

Duo/Nordic Plus Accessory Kit includes four 3/4" plastic coated steel bench dogs, two holdfasts and a set of jaw protectors.146479 .................................................................................. $84.99146476 (C) 3/4" dogs, plastic coated (4) ..............................$41.99146478 (D) aluminum jaw protectors, 1 pair ...................... $10.99146151 (E) 3/4" duo/nordic holdfast, 1 pair ........................ $36.99146492 steel anvil ................................................................. $50.99

A

SM03 Cabinet

EC

D C

Nordic Plus Cabinet

Elite Duo 1500

Length Width ClampingBench Model Stock # Height of Total Length of Top Thickness Vise Max. Distance Bench Shipping Worktop 1-vise 2-vise Worktop Center Skirt Opening 1-vise 2-vise Weight WeightElite Duo 1500 145896 34" 53" 573/4" 63" 21" 11/8" 23/4" 41/4" 541/2" 63" 89 lbs. 95 lbs.Elite Duo 1500 Combo 146535 34" 53" 573/4" 63" 21" 11/8" 23/4" 41/4" 541/2" 63" 143 lbs. 154 lbs.Nordic 1450 146468 331/2" 523/4" 577/8" 63" 195/8" 11/8" 23/4" 41/2" 541/4" 621/2" 66 lbs. 79 lbs.Nordic 1660 146469 331/2" 61" 661/8" 711/4" 195/8" 11/8" 23/4" 41/2" 623/4" 711/4" 73 lbs. 76 lbs.Nordic 1950 146470 331/2" 711/2" 771/2" 823/4" 195/8" 11/8" 23/4" 41/2" 74" 821/4" 79 lbs. 86 lbs.

SJÖBERGS Woodworking Workbenches The New GenerationSjöbergs of Sweden has been manufacturing quality workbenches for over 80 years. The product line is designed to meet the needs of the modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer.

Sjöbergs has two bench series, the Elite program, which is the top quality series, and the Nordic Plus program, which is more economical. Both series offer a complete range of sizes to meet your exact needs and come with a ten year warranty. All the Sjöbergs models are reversible, making them 100% suitable for both right and left handed woodworkers.

Elite Duo 1500 Workbench. “Amazingly versatile” is the best description for the Duo workbench from Sjöbergs. With four interchangeable vise locations and a double row of bench dog holes, the Duo

offers endless clamping options. It is also completely adaptable to either right or left handed use! The sturdy top and trestle are both crafted in oiled European beech. Included with the Duo are eight bench dogs, one pair of jaw protectors for clamping small work pieces in the vises and two holdfasts for clamping onto either the front or top of the bench. This bench is available with or without a storage cabinet (#146473). 145896 elite duo 1500* (shown) ............ $549.99146535 elite duo 1500 w/cabinet* ......$1,029.99

Nordic Plus Workbenches. Based upon the latest Sjöbergs design, the Nordic Plus series gives you the size you need at a price you can afford. The bench top is constructed in hard Nordic Birch. The amazing versatility of vice location permits left or right handed use, clamping on both ends, or dual clamping on the front. All of the wood in the bench

is FSC certified which guarantees forestry renewal. The hard Nordic birch top is built to last for a lifetime of normal use. Supplied with four steel bench dogs with a plastic coating to protect your edge tools. There is a double row of 3/4" clamping holes work-ing from each of the four vise locations, giving an endless opportunity to clamp your work! Shipped at our regular shipping & handling rate plus $15 for excess weight.146468 nordic plus 1450 ........................ $439.99146469 nordic plus 1660 ........................ $499.99146470 nordic plus 1950 (shown) .......... $549.99

Because of their heavy weight and large size, benches marked with asterisk(s) are shipped at our regular shipping and handling rate plus an additional fee for excess weight. * = $55, ** = $75, *** = $125.

Nordic Plus

Workbenches


Japanese Dozuki SawDesigned for delicate and intricate work such as joinery, mortising and dovetailing, this is the finest and most accurate Japanese saw. It is excellent for use in cutting moldings and making clean, splinter-free cuts in cabinetry and furniture-making. The blade is so precise that you can make cuts as thin as 1/32". Be careful not to abuse the saw's thin blade. Layered japanese high-carbon steel. Use light, smooth pull strokes and let the saw do the cutting. Cross-cut 26tpi.142421 ......................................................$79.99143007 replacement blade ......................$54.99

50

VIKA TwofoldEveryone can use an extra work surface. What if that surface or bench could be folded up flat when not in use or even double as a scaffold? Enter the Vika Twofold. Unfold the legs until the non skid polypro-pylene deck is on top and you have a scaffold 21.7" in height or continue rotating the legs around and extend - you have a workbench that is 47.6" long x 18.7" deep x 31.8" high with a tool tray, drilling hole, protractor and ruler inscribed into the MDF work surface. The Twofold also comes with a built in 3 outlet, 15 amp surge protected power strip and a 500 lb. capacity in either configuration. Plenty of strength and stability and at 48 lbs., light enough to be where you need it.149184 ......................................................$149.99

Rousseau Work Bench SystemThe Rousseau Work-Bench System offers 15 different footprints that are sure to fit your needs. Each assem-bled stand provides support for a work surface of your choice, as well as the addition of a middle and bottom shelf. The legs are heavy-duty 12-gauge steel to provide more than enough support for bench top tools or large work surfaces. Each leg set includes four 32" long legs, 41/2" long heavy-duty adjustable levelers, and all assembly hardware for a complete workbench. Extenders are 16-gauge steel and come six to a box in five dimen-sions: 15", 20", 28", 40" and 44". Extenders can be mounted flush to support the top surface or 6" below the top to accommodate a drawer or woodworking vise. All legs and extenders are pre-drilled to add sides and hinged doors for an enclosed cabinet and powder-coated with a durable black finish.

Work surface and shelf materials are not included.

Selecting the compo-nents you need is as simple as starting with a Leg Set, then choosing the size Extender Set you need for the length, and width. The optional threaded caster set can be added to your work-bench for a mobile work station or maximize the use of a small workshop or garage. There is even a handy chart included in the instructions with a cut-list, for the work surface and shelves, of each possible size configuration. 148371 steel leg set (4) ............................$54.99148372 15" steel extender set (6) ............$25.99148373 20" steel extender set (6) ............$34.99148374 28" steel extender set (6) ............$35.99148375 40" steel extender set (6) ............$44.99148376 44" steel extender set (6) ............$49.99148377 threaded caster set (4) ................$59.99

ROCKWELL Jawhorse™ The strong and versatile Jawhorse™ replaces your workbenches, your sawhorses, your clamps, your bench vises and so much more. With the Jawhorse you get a sec-ond set of hands for all your projects. It’s a powerful, handsfree clamp and sawhorse featuring powerful clamping jaws allowing you to securely clamp virtually anything. You can even clamp wide items like doors or plywood thanks to the 37" clamping width and with the

optional extension; you can clamp large sheet goods up to 52" wide. The Jawhorse™ is made of solid steel and features: 1-ton of clamping force, integrated wheel for transport, and a five-year warranty. Specifications: Max Load: 300lbs, Footprint (standing): 39" x 39" x 34", Footprint (folded): 29" x 14" x 13", Weight: 43 lbs. 412024 ........................................$179.99149677 log jaw ..............................$49.99

Laminated Maple Bench TopBuild your own work-bench with one of these 13/4" thick, rugged slabs of maple laminated into a single, warp resistant, self supporting panel creating the perfect work surface. Accu-rately machined and sanded satin smooth, just attach vises and bore dog holes.These tops are also perfect for kitchen work surfaces, coffee tables and bars. Ultraviolet cured acrylic finish is resistant to water, alcohol and solvent detergents. Shipped at our regular shipping & handling rate plus $15 for excess weight.145685 24" x 60", 70 lbs. ...................... $249.99145686 30" x 60", 88 lbs. ..................... $269.99145687 24" x 84", 98 lbs. ..................... $299.99

Mini Dozuki Panel SawThis mini-dozuki panel saw is superb for producing tight fitting joints. The 150mm (6") long blade is about .012 thick, and is easily changeable when needed. The back brace makes this saw ideal for dovetail joints. A tap on the back loosens the blade, and the replacement just slips into place.12F34 ........................................................$38.9912F35 replacement blade ........................$24.99

Japanese “Kugihiki” Flush Cutting SawAllows the cutting of dowels, pegs, through tenons and excess trim without marring the surrounding surface. How? The teeth on this special tool have no set, so the blade can cut right at the surface without disfiguring it. Its flexibility also permits access to tight spots and it's a great knuckle saver too. Blade has a 53/4" cutting edge and 22 TPI.12F24 ........................................................ $27.99

No Set On Teeth And Flexible Blade

Allow 'Kugihiki' Saws To Cut Flush Without

Scratching

Japanese Keyhole And Trim SawsJapanese Carvers, Detail Trim Saw. This very small keyhole style saw is perfect for cutting roughouts or removing excess stock in tight areas of carving blanks. Woodworkers will find this saw particularly useful for fine trimming and fitting of joints. The narrow 18 TPI, 43/4" blade is riveted into an ebony handle. Overall length 9".06Q32 (A) detail ........................................$25.9906Q33 (B) keyhole ....................................$18.99

B

A

Japanese Ryoba SawsThe Ryoba 2720 blade is designed with both rip and crosscut teeth and a wide blade surface for extremely accurate cutting. It is exceptionally well suited to cabinetry, furniture making and other fine wood working proj-ects in medium to hard wood. When cutting thin wood or panels, use a flatter angle to the surface (0 to 10 degrees) to insure minimal wood vibration. Hold the handle with both hands spaced well apart and find the most comfortable position, adjusting slightly for different cutting angles. This saw can be used for flush cutting, but do not over bend the blade. DO NOT force the saw. Long smooth strokes are best, allowing the weight of the saw to do the cutting. 142418 (A) super fine, cross cut 20 TPI ..$94.99142419 (B) fine, cross cut 17 TPI .............$99.99

A

B

Bakuma, American Slim CutBakuma Cross Cut Saws offer an aggressive cutting action which is great for general purpose, quick cutting of both hard and soft woods. 300mm saw has 13 TPI and is 27" long, blade is 113/4". 0.7mm (.0275") thick.126312 .......................................................$28.99126314 replacement blade .......................$15.99

Saws


www.woodcraft.com

Japanese�Hand�Saws�And�AccessoriesDozuki�Saws�with�Replaceable�Blades. Dozuki saws are popular with Japanese craftsmen for cutting fine furniture joints. These saws feature the preci-sion and durability of tensioned high carbon steel blades which are easily removed from their bamboo-wrapped handles for replacement when worn.

(A)�Ryoba�Saws are used by Japanese craftsmen to cut large joints found in architecture, furniture construction and boatbuilding. They have two work-ing edges, the crosscut edge has 9 TPI and the rip 41/2 TPI. Made of the highest quality tempered steel with a long tang securely held in a wooden handle. Teeth cut on the pull stroke. Cloth case included with Ryobas only.

Large�Ryoba�Saw has 300mm (113/4") cutting edge. Overall length 725mm (281/2"), blade tapers from 99mm (37/8") to 125mm (415/16"). 6-9 TPI.06Q21 300mm ryoba ...............................$69.99

Small�Ryoba�Saw has 210mm (81/4") cutting edge. Overall length 540mm (211/4"), blade tapers from 74mm (27/8") to 92mm (35/8"). 10-16 TPI.06Q11� 210mm ryoba ...............................$49.99

(B)�Crosscut�Razorsaw�is designed for quick cutting of hardwoods. Blade has 13 TPI, is 240mm (97/16") long, 52-70mm (23/4") wide, is of thicker stock (0.6mm) than our regular Dozuki saws for added rigidity, and is easily removed from the 103/4" handle by loosening a single screw.02P62 .......................................................$36.5002P72 replacement blade .......................$25.99

(C)�Dozuki�“Z”�Saw is one of the smoothest cutting saws you’ll ever use, ideal for tight-fitting, precision joinery. The 26 TPI x .012" thick blade of this saw (the best-selling saw in Japan) can be quickly changed by a simple tap on the back. Rigid back ensures ac-curate cuts with the 240mm (91/2") x 60mm (23/8") blade. Overall length 535mm (21").12F27 .......................................................$54.9912F28 replacement “Z” blade ................$28.99

(D)�Japanese�Beading�Saw.�This precise saw is great for very small, fine joinery work where accuracy and saw control are critical. Developed with, and for, period furnituremaker Ron Clarkson, this saw is perfect for creating those small, delicate dovetails seen on the finest antique furniture. Pull stroke cutting with this .010" thick 23 TPI, steel backed beading saw leaves precise, thin kerfs (approx. 1/64") and unbelievably smooth cuts. Overall length 141/2", blade is 71/4" with a 6" cutting length, maximum cutting depth is 1/2".126375�� ......................................................$21.99

(E)�Feather�Edge�Saw�Files are specially designed to sharpen the very fine teeth of Japanese handsaws or European backsaws. The small 75mm Yasuri is for sharpening Dozuki saws, the larger 100mm file is for larger Ryoba teeth.06Q12 dozuki file ......................................$19.9906Q13� ryoba file ....................................... $27.9906Q10� set of 2 Save $12! ........................$35.98

B

E

A

D

C

Saw Teeth are measured by one of two systems illustrated below. Each is based on the “inch” scale. Teeth per inch (TPI) indicates the number of teeth between saw gullets. Points per inch (PPI) is the European system and measures teeth from tip-to-tip.

Measuring Saw Teeth

1"1"

7�teethper�inch

8�pointsper�inch

PUTSCH�German�Hand�SawsManufactured by one of Germany’s most respected sawmakers, these saws are a great value for their cost. German steel blades are hand sharpened and set, then mounted in European Beech handles. Backsaw has a thin .054" kerf.144823 24", 7 TPI, rip ................................$44.99144825 13" blade backsaw, 15 TPI........... $47.99

‘Lynx’�Handmade�Saws‘Lynx’ brand saws, are individually produced by a craftsman so you can be confident you will receive a reliable tool that will not fail under constant hard use. Setting and grinding of the teeth is done by hand so that proper tooth geometry is maintained for the best cutting action. Stained European beech handles are fitted to blades with solid brass mounting bolts.

(A)�Lynx�Back�Saws. Strong, polished brass backs give these cabinet saws the extra rigidity for cutting perfectly straight tenons, dovetails, and other joints. Crosscut style teeth. Blade TPI Depth of Cut Kerf147411� 8" ........ 20 ...... 21/4" .... .048" .....$94.99147410� 12"........ 15......... 3" ...... .048" .....$85.99147409 14" ....... 15....... 33/4" .... .054" ...$119.99 (B)�Lynx�Hand�Saws. Taper ground blade provides friction-free cutting and the hollowing of the back reduces weight, improves balance, and lets the saw tip start a cut . Available in standard 26" length, and smaller 22" blade. Blade TPI Style147408 22"...........10 .........crosscut ........$89.99147406 26" ...........9 ..........crosscut .....$111.99147407 26" .........41/2 ............ rip .......... $104.99

A

B

Saw�And�Mini-Miter�Box�SetThis mini-miter set is perfect for cutting wood inlay material, small moldings, pen blanks or for other precise cutting and mitering. The .01" thin blade perfectly matches the thin slot miter box. The 24 TPI saw cuts through just about any type of materials, including dense exotic woods. The aluminum miter box holds material up to 2" wide and 7/8" thick for cuts at 90, 45, and 30 degree angles.140347 .......................................................$20.99

Pax�1776�BacksawMade in Sheffield England, by Thomas Flinn, using the same exacting , high standards as they did two hundred years ago. The folded brass back provides excellent balance and blade rigidity under downward pressure for fast and accurate crosscuts. The com-fortable hand finished, English Elm grips provide a beautiful accent to the saws. The Carcass� Backsaw is used for precision cuts across the grain. The blade has .003" set, with 13 points per inch and is filed for a crosscut that produces a .026" kerf. Overall length is 163/4", usable blade is 12" long x 27/16" deep.150701 carcass backsaw ........................$124.99

Saws


FORREST�Duraline�Melamine�And�Plywood�BladeDesigned for perfect, chip-free cuts on melamine and plywood, the Duraline Hi-A/T virtually eliminates the need for a scoring saw. The 40° points slice through thin bottom layers with no tears or chips. Recommended for thin, low pressure, 2-sided lami-nates, plywood and fine crosscutting on all woods. Made with double-hard C-4 submicron carbide for longer life between sharpenings. 10" x 80T, .125" kerf, 5/8" arbor hole.943304 .....................................................$149.99

52

FORREST�Chopmaster�Saw�BladeChopmaster Saw Blades are specially designed for sliding compound miter saws and radial-arm saws to minimize grabbing and throwing of scrap cut-offs. This blade has a heavier than normal steel plate and a negative face hook. Its Double-hard C-4 submicron carbide steel yields up to 300% longer life. Blades are hand-straightened to a runout of .001/.002" . The tooth style (4 points and flat) produces steady, clean extra-smooth cuts with no bottom splintering. The 10" blade has a 7/64" kerf and 5/8" arbor hole, 12" has a 1/8" kerf and 1" arbor hole.814942 10" blade 80T .............................$125.99811869 12" blade 80T .............................$135.99150266 10" blade 90T .............................$169.99150267 12" blade 90T .............................$179.99

FORRESTWoodworker�II�10"�20T�Rip�BladeThis 10″ ATB/Raker blade is very aggressive and designed specifically to rip through heavy, thick stock. We tested this blade by cutting 3" thick red oak and found the results to be exceptional. There was no hesitation required when feeding stock into the blade and the cut had absolutely no burn marks. 10" x 20T, .125" kerf, 5/8" arbor hole.148959� ....................................................... $74.99

FORREST�8"�Dado�KingIf you’re looking for the finest dado set on the market, look no further than the Dado King from Forrest Manufacturing. The Dado King features all of the same quality and precision found in Forrest blades. Each outside cutting blade is 8” in diameter with 24 precisely ground C4 carbide teeth. The chippers are the 4-wing type, again equipped with the same high quality C4 carbide teeth. Includes four 1/8" chippers, one 3/32" chipper, and one 1/16" chipper. With various combinations, dadoes from 1/4" through 29/32" in width are possible and can be set to precise widths with the included magnetic shim set. Also includes high-impact storage case.943309 .................................................... $299.99

FORREST�Premium�Carbide�Saw�BladesCut cleaner, more efficiently, and last longer between sharpenings than almost any other blade. Featur-ing super hard, long-life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of .002". These top-quality blades rip and crosscut super smooth and tear-out free. All are 10" diameter and fit 5/8" arbors.

Woodworker�IIThis ATB blade is our most popular for general table saw use. If most of your cutting is stock 11/2" or thicker, Forrest recommends the 30 tooth blade. Plate thickness of .090, kerf is 1/8".85N52 40 tooth ......................................$109.9985N53 30 tooth ........................................$94.99150268 48 tooth ......................................$134.99

Thin�Kerf�Blade�This blade works easier and more efficently. Thin kerf reduces motor load and wastes less of your valuable stock. Plate thickness of .075, kerf is 3/32".85T72 40 tooth ......................................$109.99

FORRESTWoodworker�II�10"�40T�#1�GrindThe #1 Grind is a custom version of our top selling Woodworker II from Forrest Manufacturing. It produces a square flat-bottomed cut for box joints, splines, keyways, drawer bottom grooves and any place else that you want a clean, flat cut. 10" x 40T, .125" kerf, 5/8" arbor hole.148387� .....................................................$119.99

FORREST�5″"�Blade�StiffenerHelps dampen motor vibrations transmitted to the teeth of the blade, while greatly reducing cutting noise. Hardened and precision-ground flat within .001″. For use with 10" saw blades.943312� �.......................................................$29.50

AB

C

WoodRiver® Fret�And�Coping�Saws(A)�Deluxe�Coping�Saw�Frame. This is a sturdy, well built saw that allows standard pin end coping saw blades to be tensioned at both ends of the frame, Blades can be turned 360° to saw in any direction. Depth of cut is 43/4", comes with a 15 TPI blade.141403� ......................................................$16.99141404��fine blades 20 TPI (12) ....................$7.99141406��medium blades 15 TPI (12) .............$7.99141405��coarse blades 10 TPI (12) ...............$7.99

Flat�Top�Grind�-�FTG. Teeth with flat tops and faces separate wood fibers with a chipping action to lift out waste like tiny paddles. Designed for general ripping, they cut efficiently with the grain.

Alternate�Top�Bevel�with�Raker�-�ATBR. The addition of a raker tooth to an ATB blade transforms it into a combination blade capable of cross and rip-cuts.

Triple� Chip� Grind� -� TCG.� Two shapes of teeth are alternated to produce three chips within the kerf. One tooth cuts a chip down the center while the next cut chips from both sides. This grind is used when the material is too hard or abrasive to use an FTG blade.

Alternate�Top�Bevel�-�ATB. Flat-faced teeth with alter-nating top bevels sever wood fibers first on one side, then the other. Designed for general across-the-grain and undefined grain cutoff and trimming.

Steep�or�High�Alternate�Top�Bevel�-�SATB�or�HATB. The steep grind of these blades results in very smooth, splinter-free crosscuts. Lower hook angle requires slightly more feed pressure.

FTG ATBR TCG ATB SATB

Circular SawTooth Patterns

(B)�Deep�Throat�Fret�Saw is an excellent choice for detailed marquetry and scrollwork where great depth is required. Uses 5", flat end, fret, scroll, jewelers or spiral saw blades. Depth of cut is 111/2".141407� ......................................................�$22.99

(C)�Adjustable�Frame�Fret�Saw is a traditional jew-elers saw frame that accepts plain end blades from 21/2" to 6" in length. Throat depth is 3". Perfect for veneers, thin plastics, and thin gauge brass. 141410� ......................................................$22.99

Fret�Saw�Blade�Assortment includes 36 blades in the skip-tooth pattern for general cutting in a variety of materials. Assortment includes one dozen each of #2 - 20 TPI, #5 - 12.5 TPI and #7 - 11.5 TPI.141560� ......................................................$14.79

Specialty�Marquetry�Blades. These 5" blades are used for extremely intricate sawing in wood, plastic and hard rubber 1/16" to 1/4" thick. Both are approxi-mately .023" wide, .008" thick, and have 33 TPI. 141408��3/0 skip-tooth (12) ...........................$7.99141409��3/0 double-tooth (10) ......................$7.99

Saws


8"�Dial-A-Width�DadoThe Dial-A-Width dado performs like a stacked dado, except without the shims. The exclusive Dial hub ensures accurate adjustments. Adjusts in .004" increments. Maximum 13/16" cut width. Works easily with right, or left-operating machines. Set includes 2 outside blades, 5 chippers, wrench and carrying case. Arbor is 5/8".813642 ................................................... $269.99

Box�Joint�Blades�SetBox joint construction on the table saw is now easy. Unlike a dado set, shims and adjustments are not necessary to create perfectly square, flat-bottom box joints. By placing the two 8" blades back to back, you get a 1/4" cut, and by placing them face to face, you get a 3/8" cut. Each set includes two 8" 20-tooth blades, carrying case, and instructions for making box joints and a box joint jig. Arbor is 5/8".831914 ......................................................$94.99

8"�Pro�Dado�SetThis Freud 8" stacked dado set has a negative 12° hook angle that will give you flat-bottom grooves and virtually sprinter-free cuts. Includes two 12-tooth outer blades and five 2-wing chippers. The blades and chippers come with Freud’s anti-kickback design. This set will produce 1/4" to 13/16" dadoes in 1/16" increments, and comes with shims, a carrying case and instructions. Arbor is 5/8".127245 ........................................................$94.97�

8"�Super�DadoCut everything from veneered plywood and laminates to solid wood, chip and splinter-free with a smooth, flat bottom. This set was one of the first to have a 3/32" chipper which allows the cut width to be adjusted in 1/32" increments, doubling the number of slot widths available. Most plywood today is manufactured 1/32" undersized, but with the 3/32" chipper you can cut dadoes to fit these materials with less shimming. Set includes two 8" 24-tooth blades, six chippers, shims and a carrying case. Arbor is 5/8".127246 .....................................................$199.99

FREUD�Combination�BladesWhen you need a single saw blade that will serve multiple purposes, the combination blade is the answer. The “combo” blade gives you the ability to crosscut and rip with the same blade. This blade is the workhorse in most woodworking shops.Arbor is 5/8". Dia. Teeth Tooth Design Hook Angle Kerf828761� 10" ............50T ............. Combo ........... 10° ..... .094 (TK) .....$54.99127240� 10" ............50T ............. Combo ........... 10° ........ .126 ..........$59.99127241� 10" ............50T ............. Combo ........... 10° ........ .126 ..........$69.99

FREUD�Ripping�Blades�Achieve smooth, fast rips in hardwoods and softwoods with Freud Ripping Blades. These blades come in both regular and thin kerfs (TK), and the Glue Line ripping blades produce a cut that eliminates the need for jointing or sanding after the cut. Various tooth configura-tions and kerf thicknesses allow ripping in material as thin as 1/8" and as thick as 31/2". Arbor is 5/8". Dia. Teeth Tooth Design Hook Angle Kerf127243� 10" ..........24T .................FT ................ 20° ....... .091 (TK) .....$39.99825272 10" ..........24T ............... Flat .............. 20° .......... .126 ..........$59.00825271� 10" ..........30T ............... TCG ...............12° .. .126 (glue line) $69.00

FREUD�Crosscut�BladesFeatures thick micrograin carbide tips that will produce smooth cuts and minimize tear-out. Cross-cut blades are designed for use with table saw, radial arm saws, miter saws and sliding miter saws. Choose the tooth configura-tion and hook angle to match to task at hand. All blades feature Red Perma-Shield Teflon″ coating. 81/2” and 10" blades have 5/8" arbors, 12" blades have 1" arbor. Dia. Teeth Tooth Design Hook Angle Kerf813737 81/2"......... 48T .................ATB ............. -5° ..... .090 (TK) .......$57.99826707� 10" ........... 60T .................ATB ............. -5° ..... .090 (TK) ......$64.99832606 12" ........... 72T ..................ATB ............. -5° ..... .090 (TK) ...... $79.99825270�� 10" ...........80T .................ATB .............. 2° .......... .126 ..........$89.99147772 8" ............. 64T .................ATB ............. 10° ......... .116 ..........$64.99127242� 10" ...........80T .................ATB ............. 10° ......... .116 ..........$84.99821320� 12" ........... 96T .................ATB ............. 10° ......... .116 ........$124.99127244 10" ........... 60T .................ATB ............. 15° ..... .091 (TK) ......$54.99828763� 12" ...........80T .................ATB ............. 15° ..... .091 (TK) ......$69.99833963 10" ...........80T .................ATB .............. 2° ......... .098 ..........$69.99

FREUD�Saw�Blades�Cut with a blade that will last longer and give you superior performance! Freud blades bodies are made of high-strength steel, Rc 40 to 45, so the blades remain flat and true, even after years of use. Computer-controlled equipment pretensions Freud saw blades to ensure they remain flat through the life of the blade. Unlike most blades that are stamped die-cut, each Freud blade body is cut to the exact size by a high-performance lasers. Laser-cut expansion slots reduce noise and allow the blade to expand and contract as needed during operation. Carbide specifically designed and manufactured by Freud for the woodworking industry uses super micro grain carbide with titanium for cutting teeth that stay sharper longer. Tooth design reduces tooth bite to 1.1mm reducing the effects of kickback from overfeed-ing. All blades below feature Permanent red Perma-Shield coating for virtual elimination of friction, heat build-up, and gumming which results in longer blade life and prevents development of rust. Thin kerf (TK) blades cut clean and fast with less drain on your saw and less material waste.

Precisely the best

FREUD�LM75�Thin�Kerf�Glue�Line�Rip�Saw�Blade�Freud’s popular Glue Line Rip blade is now available in a thin kerf version. The LM75 is a perfect match for saws of less than 3 HP, or for when material savings are critical. With this blade, you’ll find your rips smooth and ready for glue-up. Laser-cut anti-vibration slots and Freud’s familiar red non-stick Perma-SHIELD″ coating are standard features. Ideal for stock up to 1" thick. 10" Dia.; ″Teeth: 30 TCG; Hook Angle: 12°; Kerf: .091".″842617 .....................................................................................................$64.99

FREUD�Premier�Fusion�BladeThis flagship, premium saw blade is Freud’s best combination saw blade period! Premier blades feature larger carbide tips for more re-sharpenings, a thicker body for durability and straighter, truer cuts, and double ground teeth for a precise exceptional finish. 5/8" arbor. Dia. Teeth Tooth Design Hook Angle Kerf835866� 10" ..........40T ..................ATB .............18° ........... .126 ..........$99.99

See our expanded line of Freud Blades at a Woodcraft Store near youor visit www.woodcraft.com

FREUD�LU-7971/4"�x�60T�Hi�–�ATB�Saw�BladeBring precision to your hand held circu-lar saw! This blade is a perfect partner with popular clamping straight edge tool guides to produce flawless, chip-free results with veneered plywood, melamine and laminates . The combinat ion of the Hi -ATB carbide tooth design and anti-vibration slots make these thin kerf blades a great choice for sizing prefinished sheet goods, shelving, cabinets and doors.844954 .................................................................................................... $49.99

FREUD�Premier�Fusion�10"�x�40T�x�5/8"�Thin�Kerf�Saw�BladeFreud’s Premier Fusion blade is the flagship of their line and one of the best multi-purpose combination saw blades period! Now avail-able in a thin kerf version with 30 degree Hi-ATB tooth featuring their unique double side grind tooth geometry. This design provides a glass smooth side finish while giving a flawless top and bottom finish in veneered plywood’s, hardwoods and melamine. 845842 .................................................................................................... $79.99

Saws


OLSON�All�Pro�Bandsaw�BladesHave a tooth hardness of Rc 62-64, with a tempered back to aid stiffness and increase cut accuracy. Raker-set teeth (every third tooth is unset) are best suited for cutting wood, plastic and non-ferrous metal. Blades are de-signed for heavy-duty use in furniture manu-facturing, as well as fine craft work. Blade formulation contains pinpoint carbides, molybdenum, chrome and silicon, with a molecular structure that gives great metallurgical consistency for superior welds and sharpness retention. ‘Hook’ blades are resaw blades, with a .025" thickness, versus standard blade thickness of .032", they slice through stock more ef-ficiently while consuming less wood in the process. Length Width TPI Teeth147685 671/2" .... 1/8" ....14 .....regular ....$15.99

147687 72" ...... 1/8" ....14 .....regular ....$15.99

147695 80" ...... 1/8" ....14 .....regular ....$16.99

144918 82" ...... 1/8" ....14 .....regular ....$16.99144919 82" ...... 1/4" .....6 ......regular ....$16.99144920 82" ...... 3/8" .....4 ........ skip .......$16.99144921 82" ...... 1/2"......3 ....... hook .......$17.99

143940 931/2" .... 1/8" ....14 .....regular ....$18.99143941 931/2" ... 3/16" ....10 .....regular ....$18.99143942 931/2" .... 1/4" .....6 ......regular ....$18.99143943 931/2" .... 5/8" .....3 ....... hook ......$22.99

143944 105" ..... 1/8" ....14 .....regular ....$19.99143945 105" .... 3/16" ....10 .....regular ....$19.99143946 105" ..... 1/4" .....6 ......regular ....$19.99143947 105" ..... 5/8" .....3 ....... hook ......$24.99

147637 111" .... 3/16" ....10 .....regular ....$20.99147638 111" ..... 1/4"......6 ......regular ....$20.99147639 111" ..... 3/8" .....4 ........ skip .......$20.99147640 111" ..... 5/8" .....3 ....... hook ...... $27.99147641 111" ..... 3/4" .....3 ....... hook ...... $27.99

144922 123" ..... 1/4" .....6 ......regular ....$21.99144923 123" ..... 3/8" .....4 ........ skip .......$21.99144924 123" ..... 5/8" .....3 ....... hook ...... $27.99144925 123" ...... 1".......2 ....... hook ......$30.99

144926 133" ..... 1/4" .....6 ......regular ....$22.99144927 133" ..... 3/8" .....4 ........ skip .......$22.99144928 133" ..... 5/8" .....3 ....... hook ......$29.99144929 133" ...... 1".......2 ....... hook ......$32.99

931/2"�Assortment�Pack contains our three most popular blades for 14" bandsaws: 3/16" 10T; 1/4" 6T; 5/8" 3T.147522 3-pack ...........................................$49.99

WoodRiver®

Deluxe�Bandsaw�Blade�Brazing�KitRepair broken bandsaw blades or fabricate new ones! Brazing fixture accepts steel or bi-metal blade stock from 1/16" up to 11/4" wide. The jig is easy to use, even without a vise, with only a 180° movement of the clamps needed to change from narrow and regular width blades to wide. The kit can also be used to make blades from coil stock. Kit includes a file for smoothing the joint, a novel torch that works off a Cricket® style disposable lighter (not included) for brazing, solder, flux, applicator brush and complete step-by-step instructions – enough material for the repair of several broken blades.144187 ......................................................$34.99144188 repl. solder and flux ...................... $9.99

OLSON�Flex�Back�Bandsaw�BladesOlson’s blades are a cut above regular flex-back carbon blades! Special heat treatment produces a blade with an extremely hard cutting edge and a spring-tempered back for increased tensile strength. This permits greater tension, improved blade rigid-ity and straighter, more accurate cuts. All flex-back blades are made with alternate bevel teeth and one raker tooth.

Regular�Tooth:�Available in finer tooth pitches for smoother cuts in all woods. Not for re-sawing.

Hook�Tooth: 10° rake angle – best for hard and difficult-to-cut woods. High rake angle makes the blade very aggressive.

Skip�Tooth: 0° rake angle - best for softer woods. An all-purpose blade, excellent for resawing!

671/2"�Blades��Width TPI Teeth147686 1/4".........14 ....... regular ..... $12.99

701/2"�Blades��Width TPI Teeth150695 1/8".........14 ....... regular ..... $12.99150696 1/4"..........4 ...........skip ........ $12.99�150697 1/2" ..........4 ..........hook ....... $12.99�

72"�Blades147688 3/16" .........4 ...........skip ........ $12.99147689 3/16" ........10 ....... regular ..... $12.99147690 1/4"..........4 ..........hook ....... $12.99147691 1/4"..........4 ...........skip ........ $12.99147692 1/4".........10 ....... regular ..... $12.99147693 1/2" ..........4 ..........hook ....... $12.99147694 1/2" ..........4 ...........skip ........ $12.99

80"�Blades147696 3/16" ........10 ....... regular ..... $13.99147697 1/4"..........4 ..........hook ....... $13.99147698 1/4"..........4 ...........skip ........ $13.99147699 1/4".........10 ....... regular ..... $13.99147700 1/2" ..........4 ..........hook ....... $13.99147701 1/2" ..........4 ...........skip ........ $13.99

82"�Blades147702 3/16" ........10 ....... regular ..... $13.99147703 1/4"..........4 ...........skip ........ $13.99147704 1/4".........10 ....... regular ..... $13.99147705 1/2" ..........4 ...........skip ........ $13.99

931/2"�Blades�Width TPI Teeth147706 3/16" .........4 ...........skip ........ $14.99147708 3/16" ........18 ....... regular ..... $14.99147709 1/4"..........4 ..........hook ....... $13.99147710 1/4"..........4 ...........skip ........ $13.99147711 1/4".........10 ....... regular ..... $13.99147712 1/2" ..........4 ..........hook ....... $14.99147713 1/2" ..........4 ...........skip ........ $14.99147714 3/4"..........4 ...........skip ........ $18.99147715 3/4"..........4 ..........hook ....... $18.99

105"�Blades147716 3/16" .........4 ...........skip ........ $15.99147718 3/16" ........18 ....... regular ..... $15.99147719 1/4"..........4 ...........skip ........ $14.99147720 1/4"..........4 ..........hook ....... $14.99147721 1/4".........10 ....... regular ..... $14.99147722 1/4".........18 ....... regular ..... $14.99147723 1/2" ..........4 ...........skip ........ $15.99147724 1/2" ..........4 ..........hook ....... $15.99147725 3/4"..........4 ...........skip ........$20.99147726 3/4"..........4 ..........hook .......$20.99

111"�Blades147902 3/16" x ... 10T ........Reg .........$16.99147903 1/4" x ...... 6T ........ Skip ........$15.99147904 1/2" x .... 4T ........Hook ........$16.99147905 3/4" x ..... 4T ........Hook ........$20.99147906 3/4" x 4 ..... T ......... Skip ........$20.99

133"�Blades147727 3/16" ........18 ....... regular ..... $19.99147728 1/4"..........4 ..........hook ....... $18.99147729 1/4"..........4 ...........skip ........ $18.99147730 1/4".........10 ....... regular .... $18.99147731 1/2" ..........4 ..........hook ....... $19.99

1361/2"�Blades, Jet & Delta 18" saws.147732 5/8" .........3 ..........hook .......$24.99147733 3/4"..........3 ..........hook .......$25.99147734 1" ...........2 ..........hook .......$28.99147735 11/4" ....... 1.3 .........hook ......$39.99

142"�Blades147736 1/4".........10 ....... regular .....$19.99147737 1/2" ..........4 ..........hook .......$20.99147738 3/4"..........4 ...........skip ........$25.99147739 1" ...........3 ...........skip .......$28.99

Custom�Bandsaw�Blades.�We will custom weld a bandsaw blade to any length! Give us the exact length in inches and the stock number from the chart below. (All fractional lengths will be rounded up to the next full inch for pricing.) Tooth Pattern Widths Price per inch 1/4" 3/8" 1/2"Regular� 49G01� 49G05� 49G09� $0.30�InchHook� 49G02� 49G06� 49G10� $0.30�InchSkip� 49G03� 49G07� 49G11� $0.30�Inch

Regular Skip Hook

CARTER�AccuRight™ Bandsaw�BladesNew precise, durable AccuRight bandsaw blades. Precision milled teeth ensure smooth, accurate cutting and induction hardened flex back steel offers maximum blade life and sharpness. Length Width TPI Teeth838641 931/2" .... 3/16" ....10 ..... regular ....$22.99838367 931/2" ...... 1/4" .....4 ......hook ........$22.99838369 931/2" ...... 1/2″"......3 ...... regular ....$22.99149976 105" ....... 3/16" ....10 ..... regular ....$23.99838368 105" ........ 1/4" .....4 ......hook ........$23.99838370 105" ........ 1/2"......3 ...... regular ....$23.99149977 111"........ 3/16" ....10 ..... regular ....$24.99838372 111"......... 1/4" .....4 ......hook ........$24.99838373 111"......... 1/2"......3 ...... regular ....$24.99

Woodboring


Single-Flute�CountersinksFeature a single cut-ting edge for fast stock removal and chatter-free drilling. This uniquely de-signed cutting edge shears through wood fibers rather than tearing away at them like traditional coun-tersinks. They’ll cut a wide variety of material in portable drills or drill presses and they’re easily sharpened.145632 for #4 & #5 screws ........................ $9.99145633 for #6 screws ................................$10.99145634 for #8 screws ............................... $11.99145635 for #10 screws ..............................$12.99145636 set of 4 Save Over $5! ...............$39.99148867 one-way countersink handle ......$14.99

Titanium-Nitride�Coated�CountersinksThese industrial duty countersinks will last 4 times longer than high speed steel mod-els. Super-hard bonded titanium-nitride surface cuts smoother and faster with less pressure than con-ventional counter-sinks. For use in

any machinable material–steel, iron, soft metals, plastic and especially wood. Available in three sizes to cover all countersinking applications. 1/4" shanks, 5-flutes with 82° included angle.147209� 3/8" diameter ....................................$7.9904N46� 1/2" diameter* ...............................$12.9904N56 3/4" diameter* ...............................$14.9904N40*� set of 2 Save $5! .......................$22.98

FULLER�Tapered�Drills�Boxed�SetIncludes all the bits needed to install #6, #8, #10, #12, and #14 wood screws. You get 5 HSS tapered drills, 5 countersinks, 2 stop collars, 3/8" and 1/2" plug cutters, and 2 Allen wrenches. All in a finished hardwood case for protection and storage.13D18 .......................................................$94.99

SNAPPY�Quick-Change�Hinge�BitsThese 1/4" hex drive bits and accessories let you quickly and easily change from one bit to the next. Spring loaded, self-centering hinge bits� for #2 through #10 screws, will perfectly align your screw holes with the holes in your hinges, drawer slides or other similar hardware. The 1/4" and 5mm bits are designed for use with shelf pin drilling jigs. USA.830809 hinge bit, 5/64" (#2 - #4 screws) ... $9.99830810 hinge bit, 7/64" (#6 screws) ........ $11.50830811 hinge bit, 9/64" (#8 - #10 screws) $11.99146721 set of 3 (5/64", 7/64", 9/64") ............$29.99146727� 5/64" replacement bit .................... $2.99 146728 7/64" replacement bit .................... $2.99 146729� 9/64" replacement bit .................... $2.99 830812 shelf pin bit, 1/4" .........................$26.99148011 shelf pin bit, 5mm ......................$26.99148013� 1/4" replacement bit ..................... $9.99148012� 5mm replacement bit .................. $9.99

Snappy�Quick-Change�Chuck easily switchies from countersinks to driver bits with 1/4" hex shank ends. Bits are securely locked in the drive channel with a hardened chromium steel ball, not a flimsy wire lock. To release, pull back and it’s ready for the next bit. Fits 3/8" and larger drill chucks. USA.830806 ......................................................... $9.99

SNAPPY5-Piece�Countersinking�Drill�SetIn one step, you can drill, countersink, and counter-bore the perfect sized hole for #4, #6, #8, #10, or #12 screws. Counterbores are 3/8" or 1/2" dia., ideal for plugs or dowel buttons. 1/4" hex shank can be used with power drills and quick change chucks.830846� 5-pc. set .......................................$29.99830847� 5/64" x 3/8" ...................................... $6.99830848� 3/32" x 3/8" ....................................... $6.99830849� 7/64" x 3/8" ....................................... $6.99830850� 1/8" x 3/8" ........................................ $6.99830851� 9/64" x 1/2" ....................................... $6.99150719� trim head, 1/4" x 3/8" ...................... $9.99

SNAPPY�Tapered�Countersinking��Drill�SetTapered bits allow you to get maximum grip from your wood screws. With the added convenience of 1/4" hex drive you’ll find yourself fly-ing through drilling and driving opera-tions. We recommend the addition of a Quick-Release Hex Drive Chuck for optimum speed and efficiency. Sized for #6, #8 and #10 screws.146722� ..........................$27.99

Self-Centering�Hinge�Drilling�VIX�BitsThese highly accurate bits are used for precise drill-ing of holes for cabinet and door hinges, door butts and all large and small hardware. Desired depth is achieved by loosening a setscrew, setting the high speed drill bit, then tightening the setscrew.16I43 5/64" bit for #3 & 4 screws ...........$13.9916I41 7/64" bit for #5 & 6 screws ........... $12.5016I42 9/64" bit for #8, 9, 10 screws ........$13.5016I40 set of 3 above Save $11! .............$28.9916I46 repl. 5/64" bit ....................................$2.9916I47 repl. 7/64" bit ....................................$2.9916I48 repl. 9/64" bit ....................................$2.99

TIMBER�WOLF�Bandsaw�BladesThe worlds only thin-kerf, low-tension, silicon steel bandsaw blades will outlast your old carbon steel blades by a mile! It has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5° rake, 5-tooth set pattern and .025" thick thin-kerf blade and you have an awesome bandsaw blade!

140811 1/4" x 80", 4 TPI ............................$22.99144704 1/4" x 80", 6 TPI ............................$22.99140812 1/4" x 80", 10 TPI ..........................$22.99140813 1/2" x 80", 3 TPI ............................$24.99144705 1/2" x 80", 4 TPI ............................$24.99

141077 1/8" x 82", 14 TPI ..........................$32.99�144706 3/16" x 82", 10 TPI ........................$22.99141078 1/4" x 82", 4 TPI ............................$23.99�144707 1/4" x 82", 6 TPI ............................$23.99141079 1/4" x 82", 10 TPI ..........................$23.99�141080 1/2" x 82", 3 TPI ............................$25.99�144708 1/2" x 82", 4 TPI ............................$25.99

140175 1/8" x 931/2", 14 TPI..................... $33.99144709 3/16" x 931/2", 10 TPI ....................$24.99140177 1/4" x 931/2", 4 TPI .......................$25.99144710 1/4" x 931/2", 6 TPI........................$25.99140180 1/4" x 931/2", 10 TPI .....................$25.99140183� 1/2" x 931/2", 3 TPI ........................$28.99144711 1/2" x 931/2", 4 TPI........................$28.99140187 1/2" x 931/2", 10 TPI ......................$28.99140189 3/4" x 931/2", 3 TPI .......................$33.99

144712 3/16" x 105", 10 TPI ......................$26.99140178 1/4" x 105", 4 TPI .......................... $27.99144713 1/4" x 105", 6 TPI .......................... $27.99140181 1/4" x 105", 10 TPI ........................ $27.99140184 1/2" x 105", 3 TPI ..........................$30.99144714 1/2" x 105", 4 TPI ..........................$30.99140188 1/2" x 105", 10 TPI ........................$30.99140190 3/4" x 105", 3 TPI .......................... $37.99

835869 1/4" x 111", 10TPI ........................$28.99835870 3/8" x 111", 4TPI ..........................$30.99835871 1/2" x 111", 4TPI ......................... $31.99835872 3/4" x 111", 3TPI .........................$38.99

144715 3/16" x 133", 10 TPI ......................$31.99144716 1/4" x 133", 6 TPI ..........................$32.99144717 1/2" x 133", 4 TPI ..........................$36.99140185 1/2" x 133", 8 TPI ..........................$36.99140191� 3/4" x 133", 3 TPI ..........................$44.99140192� 1" x 133", 3 TPI, .032" thick ........$46.99

146533 1/4" x 137", 6 TPI ..........................$32.99146534 1/2" x 137", 4 TPI ..........................$36.99830598 3/4" x 137", 3 TPI ..........................$44.99830599 1" x 137", 3 TPI.............................$46.99

829911 1/4" x 142", 6 TPI ..........................$34.99829912 1/2" x 142", 4 TPI .......................... $37.99829910 3/4" x 142", 3 TPI ..........................$45.99830096 1" x 142", 3 TPI ............................$48.99

Woodboring


KREG�Pocket�Hole�Screws

Choose a fine thread screw for hardwoods or coarse thread for softwoods, plywood and composites. Hi-Lo is a dual thread design for general purpose use.

Coarse�ThreadFine�Thread

149967� #6 x 3/4" fine pan head (100) .......$3.99149968� #6 x 3/4" fine pan head (500) ....$15.99149969� #6 x 3/4" fine pan head (1000) ..$24.99142257� #8 x 1" coarse (100) .....................$4.99148751� #8 x 1" coarse (500) ...................$16.99142246� #8 x 11/4" coarse (100).................$4.99142247� #8 x 11/4" coarse (500) ............. $18.99144741� #8 x 11/4" coarse (1,000) ...........$29.99824804� #8 x 11/4" coarse (5,000) ...........$94.99840287� #8 x 11/4" hi-lo (100) .....................$4.99840288� #8 x 11/4" hi-lo (500) .................. $18.99142248� #8 x 11/2" coarse (100).................$5.99142249� #8 x 11/2" coarse (500) ............. $18.99834689� #8 x 2" coarse (50) .......................$5.99834690� #8 x 2" coarse (250) ...................$14.99146593� #8 x 21/2" coarse (50) ...................$6.99145752� #8 x 21/2" coarse (250) ..............$14.99142250� #7 x 11/4" fine (100).......................$4.99142251� #7 x 11/4" fine (500) ................... $18.99144742� #7 x 11/4" fine (1,000) .................$29.99824803� #7 x 11/4" fine (5,000) .................$94.99142252� #7 x 11/2" fine (100).......................$5.99142253� #7 x 11/2" fine�(500) ................... $18.99142689� #7 x 1" coarse pan head (100) ....$4.99142690� #6 x 1" fine pan head (100) .........$4.99833070� #6 x 11/4" fine pan head (100) .....$4.99149570� #6 x 11/2" fine pan head (100) .....$4.99149084� screw assortment kit SK03 .......$29.99

305�Stainless�Steel�ScrewsUsed for outdoor and marine applications.148881� #8 x 11/4", coarse screw (100) .....$17.99148882 #8 x 11/4", fine screw (100) ..........$18.99148883 #8 x 11/2", coarse screw (100) ....$19.99148884 #10 x 21/2", coarse screw (50) ....$19.99

KREG�Blue-Kote™Outdoor�ScrewsUsed for the majority of exterior pocket screw applications and general exterior construction.148478 #8 x 11/4", outdoor screw (100) ... $6.99148479 #8 x 11/2", outdoor screw (100) ... $6.99148480 #8 x 2", outdoor screw (50) .......... $5.99148481 #8 x 2", outdoor screw (250) .....$16.99148482 #8 x 21/2", outdoor screw (50) ..... $6.59148483 #8 x 21/2", outdoor screw (250) .$19.99149085� screw assortment kit SK03B ....$39.99

KREG�Jig®®K4�Master�SystemKreg Tool’s most popular Kreg Jig® just got better. The new Kreg Jig®®Master System includes the same K4 Kreg Jig® advertised nationally in the broadcast infomercial along with all t he accessories you need to experience Kreg Joinery™ at a higher level. Build projects even better and easier than before. The new Master System will have you building strong joints right out of the box. Kreg Jig® K4 Master System includes: Kreg Jig K4 with dust collection attachment, face clamp, portable base, 3-hole drill guide block, drill guide spacer, material support stop, quick-change drill bit, 6" driver, 3" driver, starter screw & plug set, quick start guide and Skill Builder DVD. For a limited time also includes Kreg Jig® Mini for repairs in tight spots.151277 .....................................................$139.99

KREG�Quick-Change�Pocket�Hole�AccessoriesThis one kit has everything you need to switch from drilling pocket holes to driving pocket screws faster than ever! Kit includes: new 3/8" diam-eter step drill bit with 1/4" hex-shank (also available separately); innovative chuck featuring an in-dustrial design which eliminates slippage and optimizes drilling power; 6" long, #2 square-drive bit perfect for pocket screw applications. Use high speed drill setting for cleaner holes.148990 kit ..................................................$29.99148991 pocket hole bit only .......................$17.99

Kreg�Jig®�Micro�Pocket™�Drill�GuideThe all new Micro Pocket™ Drill Guide is a must-have accessory for Kreg Jig K3 and K4 owners! The smaller pocket hole and shorter 3/4" panhead screws combine to secure thinner materials yet keep the head of the screw below your finished surface. Micro Pocket hole is 25% smaller than standard Kreg pocket holes which is the perfect size for 1/2" material. Smaller pocket hole is less noticeable on exposed joints. Kit includes Micro Pocket drill guide, Micro Pocket drill bit, depth collar and sample pack of #6 x 3/4" panhead screws. Replacement 5/16" diameter Micro Pocket drill bit has 1/4" hex-shank for quick-change chucks.149964� micro pocket drill guide kit ..........$49.99149965� repl. micro pocket drill bit ............$16.99149966� micro pocket depth collar .............. $2.99

Kreg�Jig®�Panhead�Screws�(A)The 3/4" length panhead screw is designed exclu-sively for Micro Pocket™ system. Fine thread is best suited for plywood, composite material and most hardwoods. Available in 100-count, 500-count and 1,000-count quantities.149967 100-ct. #6 x 3/4" panhead screw ....$3.99149968 500-ct. #6 x 3/4" panhead screw ...$15.99149969 1,000-ct. #6 x 3/4" panhead screw ........... ..... ..................................................$24.99

A

KREG�Pocket�Hole�PlugsThese real wood pieces are pre-cut at the proper angle to fill and hide Pocket Holes. Just glue and sand flush. Package of 50 ...............................................$8.99�Package of 200 ............................................$24.99� Pkg. 50 Pkg. 200� maple� 140084� 148586 pine 141946� 148585� oak� 141947� 148584 cherry� 141943 151139 walnut 141944� 843432� cedar 142693� 844272

Paint�Grade�Plugs for projects that will be primed and painted.147865��paint grade (50).............................. $5.99148583��paint grade (200) ..........................$17.99

KREG�Micro�Pocket�Hole�PlugsUniquely designed for the Micro Pocket system. Packages of 65 pieces.848172�� cherry ............................................. $6.99848173 maple ............................................. $6.99848174 oak ................................................. $6.99152623 pine ................................................ $6.99848175 paint grade .................................... $4.99

Kreg�Jig®® K4The newest Kreg Jig® is the perfect choice for DIY enthusiasts or anyone new to pocket-screw joinery. Whether you’re building your first set of garage stor-age shelves or making simple repairs around the house, you will finish the job in less time, and with far less effort than you ever thought possible. Pocket-screw joinery makes every joint you build faster and stronger and the Kreg Jig® K4 creates those joints easier than ever before. Its simple design gives you the confidence to start the project, and with joints as easy as - Drill. Drive. Done! - you’ll actually want to finish it. Patented 3-Hole drill guide is adjustable for material thickness from 1/2" to 11/2" and can be removed for repair applications. Features built-in drill bit depth setting gauges, large clamping recess to secure the jig to your workbench, and optional dust

collection shroud for chip-free operation. Includes everything you need to get started - Kreg Jig®® K4, stepped drill bit, stop collar, 6" square drive bit, starter screw set, starter plug set, SkillBuilder™ DVD, and quick-start guide, all inside a compact and durable carrying case. Replacement dust shroud available for K4 and K3 pocket hole systems. Each K4 Drill Guide Spacer compensates for an additional 1/4" in material thickness.149264 Kreg Jig ........................................$99.99147861� acc. drill guide block ..................$34.99151243� acc. portable base ...................... $19.99149533� acc. dust shroud for K4 or K3 ..... $9.99149534� K4 drill guide spacer .................... $9.99811112� replacement drill bit ...................$18.99817629� replacement stop collar ............... $3.99

Removable Drill Guide

Built-In Clamp

Woodboring


Dowel�PinsSpiral glue channels to eliminate air pockets and assure good glue distribution. Chamfered ends for easy insertion. Dia. Length Qty.50M11 1/4" ............ 11/2" .......... 100 ........... $4.5050M21 5/16" ............ 13/4" .......... 100 ........... $5.5050M31 3/8" .............. 2" ............ 100 ........... $5.99

Dowel�And�Tenon�CentersZinc-plated steel centers perform three basic align-ments. For dowel-ling, the centers will make correctly positioned marks for precise drilling of your second set of holes. To properly position chair rungs or other spindle work, slip a center over the end of your tenon to mark the location for boring. To find the center of a dowel, slip a center over the end and tap lightly. The 8-piece set contains 2 of each size.123721 8-piece set .................................... $4.99123717 1/4", bag of 10 ................................ $5.99123718 5/16", bag of 10 .............................. $6.99123719 3/8", bag of 10 ................................ $6.99123720 1/2", bag of 10 ................................ $6.99

KREG�90-Degree�Corner�ClampKreg combines the function of a corner clamp with the convenience of a face frame clamp to create the ultimate clamp for box construction. Self-squaring design pulls drawer boxes into alignment, quickly and easily. Shelving assembly is a snap with 90° corners and T-joints. Large clamping surface protects soft woods against workpiece imprint. Includes quick-adjust handle for varying stock thicknesses up to 11/4". Each 4+149090 ..................................$34.99�......$31.49

KREG�Bench�Klamp�SystemsKreg Face Clamps providea quick, easy way to hold rails and stiles in place while installing pocket hole screws. Perfect for assembling pocket hole joints, or as a general hold-down when routing, sanding, and more. Bench Klamp System consists of a 3" x 4", 1/4" thick hard-anodized aluminum insert plate and clamp. Large Bench Klamp System consists of a 10" x 10", 1/4" thick steel plate and that can be used as a stand-alone clamping fixture. Both systems feature a screw head to keyed slot connec-tion which allows for instant removal of the clamp from the plate. Bench Klamp rotates 360° on the plate with 3" throat depth and adjustment handle. Long Reach Bench Klamp has same connection and adjustment handle with 6” throat depth. Insert plates can be routed into your workbench to add multiple clamping locations.149091 bench klamp system ....................$39.99149092 large bench klamp system ..........$59.99149093 accessory bench klamp ...............$29.99149094 long reach bench klamp ..............$34.99146157 extra aluminum insert plate ....... $11.99

KREG�Face�ClampsThe Premium Face Clamp has a 31/4" reach for face members 2" and smaller. The Large Face Clamp offers a 6" reach for face members 2" and larger. The Extra-Large Face Clamp has a 10" reach for difficult to hold interior members. All clamps have comfort grips.149086 premium face clamp ....................$22.99149087 large face clamp...........................$29.99149088 extra-large face clamp .................$39.99

Kreg�Jig®® �Mini�KitKit includes: Mini Jig, HSS 3/8" step drill bit, stop collar, and hex key.144740� Kreg Jig® Mini Kit�...........................$21.99141942� Kreg Jig® Mini only�..........................$10.99

KREG�Right�Angle�ClampOne side of the clamp is formed into a pin that mates perfectly into a 3/8" pocket hole, the other side has a swivel pad that allows the clamp to align perfectly with the mating surface. New comfort grips eliminate pinching when releasing the clamp. 4+149089� �..................................... $27.99�..... $25.29

Kreg�Jig®® �Jr.If you’re ready to start your next woodworking proj-ect or home improvement project, the R3 Kreg Jig® is the tool for you. Kit includes R3 Kreg Jig®, Clamp Pad Adapter, drill bit, depth collar, and Allen wrench all contained in a durable plastic carrying case with built-in depth collar setting gauge and screw selection chart. 147643 .......................................................$39.99

Kreg�Deck�Jig™�SystemWith the Kreg Deck Jig™ and a few simple tools you already own, you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! The Kreg Deck Jig creates an incredibly strong wood-to-wood bond through precisely placed self-tapping screws. Works great with composite deck boards, ACQ, native soft-woods such as redwood, cedar and pressure-treated pine as well as certain tropical hardwoods like ipe, red balau, and ironwood. The jig has an easy-grip handle for a secure hold and complete control over each and every joint. Hardened steel drill guides keep the special stepped bit and driver bit at the precise, optimal angle. Three separate drill guides let you install deck boards in a variety of hard-to-reach areas. Handy spacer rings ensure accurate deck board spacing for proper drainage and longer deck life. Deck Jig System includes: Deck Jig, deck jig drill bit with stop collar, driver bit with stop collar, three 5/16" spacer rings, three 1/4" spacer rings, sample deck screws, instructional DVD and durable carrying case. Kreg Deck Screws were designed specifically for use with the Kreg Deck Jig and feature a KTX #1 square drive to reduce cam-out, a flat-bottom head to resist splitting and a self-tapping tip. Protec-Kote™ screws feature three anti-corrosion layers to protect against rusting in a wide variety of decking applications including ACQ treated lumber. Kreg 305 stainless screws provide the best protection against corrosion in the long-term.150881� Kreg Deck Jig system ...................$99.99150900� repl. drill bit w/depth collar .........$16.99151306� repl. driver bit w/stop collar .......... $4.99151307� repl. 5/16" spacer rings, 12 pc. ...... $9.99151308� repl. 1/4" spacer rings, 12 pc ......... $9.99150901� 100 count, #8 x 2" coarse ...................... Protec-Kote deck screw ..................$7.99150902� 700 count, #8 x 2" coarse ...................... Protec-Kote deck screw ...............$49.99150903� 100 count, #8 x 2" coarse ...................... stainless steel deck screw ...........$17.99150904� 700 count, #8 x 2" coarse ...................... stainless steel deck screw ........$109.99

Woodboring


Tapered�Drills,�Countersinks�And�Stop�CollarsThe combination of a quality high speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws. Tapered drills afford greater grip-ping power for screws than standard twist drills because they match the tapers of their corresponding screw sizes, allowing the screw to grip along its entire length. Our matching countersinks are made of high carbon steel and have four flutes for clean, accurate boring with minimum tearout. They are adjustable along the length of the drill and can be tightened with two set screws. The stop collars are also adjustable for varying counterbore depths and can be set just behind the countersink cutters when a counterbore is not necessary.

16-Piece�Set. Includes 7 tapered drills from 1/8" to 7/32" by 64ths, corresponding countersinks, two stop collars and Allen wrench in a handy wood holder.13D09 16-pc. set Save Over $31! ...........$88.99

12-Piece�Set. Designed for cabinetmakers, this set has drills and countersinks for #5, #6, #7, #8 and #9 screws. Includes a 3/8" plug cutter, stop collar and Allen wrench, all in a foam lined case.143662� ........................................................ $74.99

Tapered�Drills also available individually. Diameter Screw Size06J41 ..............1/8" ...............5 .................. $6.5906J42 .............9/64" ..............6 ...................$7.3906J43 .............5/32" .............. 7 ...................$7.3906J44 ............ 11/64" .............8 ...................$7.6906J45 .............3/16" ..............9 .................. $8.7906J46 ............ 13/16" .............10 ................. $8.7906J47 .............7/32" .............12 ................. $8.79

Countersinks06J31 ............. 3/8" ...............5 .................. $9.9906J32 ............. 3/8" ...............6 .................. $9.9906J33 ............. 3/8" ............... 7 .................. $9.9906J34 ............. 3/8" ...............8 .................. $9.9906J35 ............. 3/8" ...............9 .................. $9.9906J36 ..............1/2" ..............10 ................. $9.9906J37 ..............1/2" ..............12 ................. $9.99

Stop�Collars06J51 ............. 3/8" ............. 5-9 ................ $4.3906J52 ..............1/2" ........... 10-12 .............. $5.50

Plug�And�Tenon�Cutter�SetsHigh quality carbon steel cutters feature 4 or 5 (depending on size) cutting spurs to quickly remove stock. Make tenons or plugs up to 3" long. Use for joinery, chair spindles, toy making, anywhere you need to create a quick, accurate tenon. 3-piece set features 3/8", 1/2" and 5/8" cutters, 5-piece set also includes 3/4" and 1" cutters. Both sets are packed in a wooden storage box.141009 3-piece set ....................................$33.99141010 5-piece set ....................................$59.99

SNAPPY�Tapered�Plug�CuttersThese hex drive plug cutters maximize the torque needed to bore into the hardst woods. Plug cutter set is made of hardened steel for long tool life. Features tapered sides and a chamfered end for easy starting, tight fitting plugs. Set of three cutters for 1/4", 3/8", and 1/2" plugs.146723 (A) set of 3, 1/4", 3/8", & 1/2" ..........$32.99146724� 1/4" plug cutter ..............................$10.99147654� 5/16" plug cutter ........................... $11.99830818 3/8" plug cutter..............................$13.99147655� 7/16" plug cutter ............................$12.99830819 1/2" plug cutter ..............................$16.99146725 5/8" plug cutter..............................$19.99146726 3/4" plug cutter ..............................$25.99147656� (B)�1" plug cutter ..........................$29.99830806 (C) quick change chuck ................. $9.99

A

B C

WoodRiver®

8-Piece�Deluxe�Plug�Cutting�KitThis kit will satisfy most all of your needs for wooden plugs. Includes a straight and a tapered plug cutter in 1/4", 3/8", 1/2", and 5/8" diameters. These quality carbon steel cutters feature fast cutting edges to make smooth sided plugs with rounded shoulders. The straight cutters are self-ejecting. All 8-pieces are fitted and labeled in a handy wooden storage case.143567� .......................................................$43.99

WoodRiver®

22-Piece�Tapered�Drill�SetGive wood screws more bite by pre-boring with these tapered drill bits. This economical 22 piece set con-tains 7 drill bits with countersinks, stop collars, and an Allen wrench, all indexed in a wooden stand up box. These bits let you drill per-fect holes for #5 through #12 screws with a 3/8" countersink.146145 .......................................................$23.99

Screw�ExtractorsThe easy way to remove s h e a r e d o r b r o k e n screws! Using a drill press or a power drill with a pre-bored guide block, these hollow, sawtooth-edged extractors bore a clean hole around the broken screw without damaging the surrounding surface. 1/4" extractor removes up to a #8 screw, 5/16" up to a #10 screw, and 3/8" up to a #12 screw. Overall length 2", both ends are equipped with sawtooth cutting edges.124210 1/4" ...................................................$9.99124211 5/16" ............................................... $11.99124212 3/8" ................................................ $11.99

MicroGrabit®�4-Piece�Extractor�SetFor use when smaller screw or boltheads have been sheared off, this professional grade bit is a two-step screw and bolt extractor in one tool! Use any 3/8" variable speed, reversible drill and the self centering, serrated drill tip, not only prevents wondering and walking, but also provides the torque necessary to extract bolt and screws with shanks from 1/8" to 1/4" (3mm to 6mm) in diameter.150912�� .......................................................$26.99

ProGrabit®�3-Piece�Extractor�SetThis three piece set contains everything you need to quickly and easily remove most Phillips, Torx, or Square Drive screws (sizes 4 through 14) and hex head bolts (No. 10 through 5/16") from wood, plastic or metal when the head has been sheared off. Use any 3/8" variable speed, reversible drill and the self centering tip drills without wondering and walking. Flip the bit and use the screw end to extract the screw or bolt. Drills up to Grade 8 and 10.9 class fasteners. Replacement No. 1 (sizes 4-7; bolts No. 10) and No. 2 (No. 8-10; bolts 1/4") bits cover the most common screw sizes.148984� .......................................................$22.50150908� repl. No. 1 bit .................................. $9.50150909� repl. No.�2 bit .................................. $9.50

X-Out�®�#1�&�#2One-step, screw extraction for Phillips, Torx, or Square Drive screws with damaged heads or hex bolts with rounded heads. Using a 3/8" variable speed reversible drill, or manually with a 1/4" hex bit holder, insert the tip in the damaged head and reverse it out. No. 1 (screw 4-7; bolts No. 10) and No. 2 (screw 8-10; bolts 1 /4") bits cover the most common sizes you’ll need to remove.150910��X-Out No. 1 ...................................... $9.50150911��X-Out No. 2 ...................................... $9.50

Woodboring


WoodRiver®

16-Piece�Carbide�Tip�Forstner�Bit�SetThis wood boxed Forstner set is a remarkable value. Sixteen bits, with carbide tips for long life, are neatly and conveniently ready when you need them. Sized by eighths, the bits drill holes from 1/4" to 21/8". Larger bits have shank diameters reduced to 3/8" to allow use with almost any drill press. Shank length ranges from 23/4" (for the larger diameter bits) to 31/8" on the smaller diameter bits. While ideally suited for drill press use, Forstner bits can be used in handheld drills when run at extremely low speeds.144500 .................................................... $146.99

FAMAG�Forstner�Bit�SetThe versatility and precision of Forstner bits is well known by professional woodworkers. These smaller length bits are forged and machined from alloy steel for dependable service. Unique center spur and circular rim bores side grain, end grain, on angles, or through knots without deflection. Double cutting edges leave flat bottom holes and smooth sides for precision work on solid stock, veneers or laminates. Overall length 31/2". 1/4" through 11/8", have 5/16" shank, 11/4" and above have 3/8" shank.

Forstner� Bit� Extensions. These extensions solve one of the major problems with Forstner bits—their limited depth capacity. Made of high quality, precision machined steel, all have reduced shanks that let you use them in any 3/8" drill. Each uses a hex screw to hold the bit shank in the extension.144512 5/16" x 5" extension .................... $21.99144513 5/16" x 93/4" extension ................$28.99144514 3/8" x 51/8" extension .................$28.99144515 3/8" x 97/8" extension ..................$35.99

Boxed�Set�of�7 includes a wooden box to keep bits organized and protected. Includes 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", and 1" diameters.12B33 set of 7 Save Over $23! ............$82.25Set�of�16. Includes 1/4" through 21/8". No box.12B43 set of 16 Save Over $96! .........$319.99

Also�available�individually12E31 1/4" ... $11.9912E32 3/8" ... $12.9912E33 1/2" ... $12.9912E34 5/8" ... $14.2512E35 3/4" ... $16.9912E41 7/8" .... $17.99�12E42 1" ..... $18.9912E45 11/8" $25.99

12E46 11/4" ...$25.99 12E43 13/8"...$26.99 12E47 11/2" ...$29.99 12E48 15/8"...$30.99 12E49 13/4"... $37.99 12E52 17/8" ...$41.99 12E44 2" .......$43.99 12E51 21/8"...$45.99

PocketHoles

Flat Bottom Holes

Partial Arcs and End Grain Holes

WoodRiver® Forstner�Bit�Sets16-Piece�Set.�We’ve seen many imported forstner bit sets here at Woodcraft and quite frankly we were very skeptical when we began to test these. To our surprise these bits looked good, cut clean, and did not burn even though we intentionally tried to “hurt” them with quick, repetitive drill press borings. We believe these are an exceptional value for the hobbyist or occasional user. Bits larger than 1" have “saw toothed” edges to keep the larger cut-ting edge cool while boring. Includes 1/4" - 21/8" in 1/8" increments, packed in a wooden case. 3/8" SH, 31/2" overall length.147067� set of 16 Save Over $39! ..........$78.99

7�-Piece�Set. Includes 1/4" - 1" bits in 1/8" increments with 3/8" shanks in a wooden storage case.147068 set of 7 Save Over $14! .............$24.99

10-Piece� Set. Includes 1/4" - 11/2" bits (no 11/8") in 1/8" increments with 3/8" shanks in a wooden storage case.147069 set of 10 Save Over $26! .......... $37.99

24-Piece�Set. Our most complete set - includes: 1/4" - 31/8" bits in 1/8" increments. Bits less than 21/8" in diameter are 31/2" long with 3/8" shanks; bits 21/4" diameter and larger are 6" long with 1/2" shanks.145501 set of 24 Save over $108! ..... $164.99

Forstner�Bit�Extensions add 4" or 10" of extra length to your bits. Attaches to your bit with two set screws.145705 3/8" shank x 4" extension ................$5.99145706 1/2" shank x 4" extension ................$6.99147999 3/8" shank x 10" extension ........... $11.50148000 1/2" shank x 10" extension ............$16.99

Individual�Forstner�BitsBits 21/8" or smaller have 3/8" shanks; bits larger than 21/8" have 1/2" shanks.125923 1/4" .......$3.99125924 5/16" ......$3.99125925 3/8" .......$3.99125926 7/16" ......$4.99125927 1/2" .......$4.99125928 9/16" ......$4.99125929 5/8" .......$5.99125930 11/16" ....$5.99151279 18mm ..$6.99151280 19mm ..$6.99125931 3/4" .......$6.99151281 20mm..$6.99125932 13/16" ....$6.99125933 7/8" .......$6.99125934 15/16" ....$6.99151282 25mm ..$6.99125935 1" .........$6.99147884 11/16" ....$7.50125936 11/8" .....$7.50�147997 30mm $6.99125937 11/4" .....$7.99

125938 13/8" .....$8.50125939 11/2" .....$8.99147998 40mm $9.99128143� 19/16" ...$8.99125940 15/8" .....$9.99125941 13/4" .....$9.99125942 17/8" .....$9.99140866 115/16" ..$9.99125943 2" .......$10.99125944 21/8" .. $11.99125945 21/4" ...$14.99125946 23/8" ...$15.99125947 21/2" ...$16.99125948 25/8" ..$16.99125949 23/4" ...$19.99125950 27/8" ...$19.99125951 3" .......$20.99125952 31/8" ...$22.99125953 31/4" ...$23.99125954 31/2" ...$24.99

142511 35mm carbide tipped ................. $21.99142512 40mm carbide tipped ..................$25.99

BORMAX�Forstner�Style�Bits�A radical new design that features razor sharp, wave-form cutting teeth that work cooler, require less power and produce less friction. This results in more efficient cutting with an improved finish from a bit that can stay sharp longer than any Forstner bit on the market. Side clearance on the bit provides tear free and accurate holes in both soft and hardwoods. Overall length for all bits is 31/2". Shank size is 5/16" on bits 5/8" - 13/16" and 3/8" on bits 11/4" - 21/4". Set of 5 contains 5/8", 3/4", 1", 11/8" & 13/8" in a wooden box. Set of 13 (no box) contains 5/8" - 21/8" in 1/8" increments. Made in Germany.140014 boxed set of 5 Save $12! .......$132.99143235 set of 13 Save $79! ............... $439.99129987 5/8" ................................................$19.99129988 11/16" .............................................$24.99129989 3/4" ................................................$25.99129990 13/16" ............................................. $27.99129991 7/8" ................................................ $27.99129992 15/16" ............................................. $27.99129993 1" ..................................................$29.99129994 11/16" ............................................$29.99129995 11/8" ..............................................$29.99129996 13/16" ............................................$33.99129997 11/4" ..............................................$33.99129998 13/8" ..............................................$39.99129999 35mm ..........................................$39.99140010 11/2" ..............................................$44.99142161 40mm ..........................................$59.99143219 15/8" ..............................................$46.99140011 13/4" ..............................................$48.99143221 17/8" ..............................................$50.99140013 2" ..................................................$52.25143220 21/8" ..............................................$66.99140012 21/4" .............................................. $74.99

Drill�GuideDrill perpendicular holes on flat surfaces, board edg-es, cylinders, even spheres! Set includes 3/16", 1/4",5/16", 3/8", 7/16" and 1/2" diameter hardened steel bushings. Also includes a center punch/locator pin, and easy-to-follow instructions.140876 .......................................................$14.99

Drill�Bit�Stop�CollarsThese stop collars are of the "split-ring" design, which positively lock anywhere along the bit diameter. They work on both standard and brad point bits. Unlike setscrew type collars that may skew or damage the bit, these units will not move after tightening. The 7-piece set includes a hex key and 1 each of the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2".142562� ......................................................... $9.99

Woodboring


MILLERStepped�Dowel�SystemThe Miller dowel is inserted 75% by hand because of the relationship of the dowel shape to its pilot hole. You get better holding strength, it’s easier to tap in and by inserting the dowel through the top board is sim-ply that there is less chance for the pilot hole to be misaligned. The 1X dowels are 25/8" long and 3/8" at their largest diameter. The Mini X dowels are 15/8" long and 1/4" at their largest diameter for joining 1/ 2" stock. Kits include a step bit and 50 dowels. Reduced shanks to fit any 3/8" or larger chuck.144570 1X dowel kit .................................. $27.99827522 1X bit only .....................................$18.99827523 1X birch dowels (40) ...................... $8.99827524 1X cherry dowels (40) ..................$12.99827525 1X oak dowels (40) ..................... $10.99827526 1X walnut dowels (40) ................ $13.99827532� mini X dowel kit ............................$23.99827533 mini X bit only ...............................$10.99827534� mini X birch dowels (100)�............ $13.99827535� mini X cherry dowels (100)�.......... $23.99827536� mini X oak dowels (100)�.............. $16.99827537 mini X walnut dowels (100)�......... $24.99

C

Rosette�CuttersMake your own plinth blocks for perfectly matching door and window trim treatments! No matter what your project these carbide drill press cutters will produce clean, smooth cuts in most woods. Available in four patterns and two diameters with 1/2" shanks.144997 (A) 21/8" dia. cutter .....................$64.99145001 (B) 21/8" dia. cutter .....................$64.99145002 (C) 21/8" dia. cutter .....................$64.99145003 (D) 21/8" dia. cutter .....................$64.99145004 (A) 23/4" dia. cutter .....................$76.99145005 (B) 23/4" dia. cutter .....................$76.99145006 (C) 23/4" dia. cutter .....................$76.99145007 (D) 23/4" dia. cutter .....................$76.99

B

AC

D

B

D

ACircle�CuttersDesigned for use in drill presses for cutting clean holes from 1" to 77/8" in diameter up to 1" deep. High Speed Steel single wing cutters are easy to sharpen and set up. Cen-ter pilot bits keep the tools on center for exact results. Max. speed 500 RPM.

(A)�Large�Circle�Cutter for 13/4" to 77/8" diameter circles. Has 1/4" pilot bit and 1/2" diameter shank.16N41 ....................................................$34.9916N45 extra wing cutter .......................... $9.99

(B)�Small�Circle�Cutter for 1" - 6" diameter circles. Has 6mm pilot bit and stepped 3/8" - 1/2" diameter shank.145072 ....................................................$19.99145230 extra wing cutter ...........................$7.99

A

B

844149� 15/16" .............................................$30.99844150� 1" .................................................. $31.50844151�� 11/16" ............................................ $31.99844152� 11/8" ..............................................$32.50844153� 13/16" ............................................$32.99844154� 11/4" ..............................................$33.50844155� 13/8" ..............................................$34.99844156� 11/2" .............................................$35.99844157�� 15/8" ............................................... $37.50844158� 13/4" ..............................................$39.50844159� 17/8" ..............................................$40.99844160� 2" ..................................................$42.99844161�� 21/8" ..............................................$44.99844162� 21/4" ..............................................$46.99844142� MT1 adapter .................................$38.99844163� MT2 adapter ................................. $41.99844164� MT3 adapter ................................. $47.99844165� 90mm extension ..........................$25.99844166� 150mm extension ........................$29.99844167�� 270mm extension ........................$33.99844168� 5-pc. Set A ...................................$124.99844169� 10-pc. Set A ................................ $294.99844170�� 10-pc. Set B (shown) ................. $324.99

Maxi�Cut�Kit for pepper mills, includes 11/16" forstner bit, 150mm extension, #2MT adapter.................... 847141� .......................................................$89.99

10-piece Set B

COLT�MaxiCut�Forstner�Bit�SystemThe German made COLT MaxiCut is a totally new cutting head design that combines the advantages of a forstner bit with those of a boring bit while the high performance RotaStop shank provides optimum torque. The sectioned cutting rim produces less heat for considerably longer tool life. The saw tooth effect of both cutting cam pairs on the circular cutting edge offers a noticeably easier and faster boring tool. The chip breaking grooves on the internal cutting edges of 3/4" and larger bits guarantees smoother drilling and easier swarf removal. These bits are suitable for half, inclined, overlapping and deep bore holes. The polygonal shape of the RotaStop shank ensures optimum transmission of the torque and practically chucks itself automatically by means of the rising contours. The result is no slipping in the chuck and precise results when machining the hardest of materials. Combining the Morse-Taper adapters and extensions allows easy tool changing within seconds and longer service lives for the tools. 5-piece�Set�A contains sizes: 5/8", 3/4", 1", 11/8" and 13/8". 10-piece�Set�A contains sizes: 1/2", 5/8", 3/4", 7/8", 1", 11/8", 13/8", 11/2", 13/4" and 2". 10-piece�Set�B contains sizes: 11/16", 13/16", 15/16", 11/16", 13/16", 11/4", 15/8", 17/8", 21/8" and 21/4".844141�� 35mm............................................$34.99844143� 1/2" ................................................$26.99844144� 5/8" ................................................. $27.50844145� 11/16" .............................................$28.50844146� 3/4" �................................................$28.99844147�� 13/16" .............................................$29.50844148� 7/8" ................................................$29.99

PORTER-CABLEQUIK®��JIG®�Pocket�Hole�JigThe new QUIK JIG® from Porter-Cable eliminates time consuming set-up and calculations for wood boring operations. Simply set the stop collar on the drill bit, one time, and it is ready to go! The Depth Control System of the jig automatically sets the pocket hole location for different material thicknesses and the QUIK JIG® accommodates material thickness from 5/8" up to 13/8". With your material clamped in the jig, the screw length indicator shows you the length of fastener necessary and adjustable spac-ing between the pocket holes can be varied from 3/4" up to 13/8". A repeatable clamp makes drilling multiple pieces quick and easy. Includes a remov-able dust port/container that can be hooked up to a dust extractor or standard shop vacuum. Includes: QUIK JIG®, drill bit with collar, 6" clamp, 100 pocket hole screws, 6" square driver, 3" square driver and instruction manual. 847359 .................................................... $229.99

Woodboring


COLT�Twinland�Brad�Point�BitsWant to drill faster, cleaner holes with a longer last-ing bit? Manufactured in Germany to the highest standards, these radical new bits feature a patented Twinland 25° flute design. The Twinland design improves guidance and accuracy, and provides accelerated chip clearance. Faster chip clearance means less heat, cleaner holes, and longer bit life. Like us, you’ll be amazed at how much better these tool steel bits perform when run side-by-side with traditional bradpoint bits. Bits up to 3/4" have reduced shanks to fit 3/8" drill chucks, larger than 3/4" have reduced shanks to fit 1/2" drill chucks.

Set�of�7�Fractional�Brad�Point�Bits� includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" sizes.146645� set of 7 Save Over $7 .................$19.99

Set�of�4�Large�Fractional�Brad�Point�Bits�includes 5/8", 3/4", 7/8", and 1" sizes.146644� set of 4 Save Over $10 ..............$59.89

Individual�Fractional�Bits.146646 1/8" .....$2.99146647 5/32"....$2.99146648� 3/16" ...$2.99146649 7/32" ....$2.99146650� 1/4" .....$2.99146651� 9/32"....$3.50146652� 5/16" ....$3.50146653� 11/32" ..$3.99

146654� 3/8" ..... $3.75146655� 7/16" ....$4.50146656� 1/2" .....$6.99146657� 9/16" .....$7.99146658� 5/8" .....$8.99146659� 3/4" ...$15.99146660� 7/8" ...$19.99146661� 1" .....$24.99

Set�of�7�Metric�Brad�Point�Bits includes 4, 5, 6, 7, 8, 10, and 12mm sizes146611�� set of 7 Save Over $10 ..................$19.99

Individual�Metric�Brad�Point�Bits.146612� 3mm... $2.99146613� 4mm... $2.99146614� 5mm... $2.99146615 6mm .. $3.99146616� 7mm ... $3.99146617� 8mm .. $4.99146618� 9mm .. $4.99146619� 10mm $4.99146620� 11mm $5.99146621� 12mm $6.99146622 13mm $6.99146623 14mm $6.99

146624 15mm ... $7.99146625� 16mm ... $7.99146626 17mm $11.99146627� 18mm $12.99146628 19mm $13.99146629 20mm $14.99146630� 22mm $15.99146631 24mm $16.99146632� 26mm $17.99146633 28mm $18.99146634� 30mm $19.99

COLT�Extra-Long��9"�Brad�Point�BitsCommonly called “beam drills” in Europe, these high-quality German-made bits drill fast and have excellent chip clearance. Perfect for boring deep holes and drilling in hard-to-reach areas. Bits up to 3/4" have reduced shanks to fit 3/8" drill chucks, larger than 3/4" have reduced shanks to fit 1/2" drill chucks.146643 set of 8 Save Over $22..............$99.99

146635� 1/4" ...................................................$9.99146636� 5/16" ...............................................$10.99146637� 3/8" ............................................... $11.99146638� 7/16" ...............................................$13.99146639� 1/2" ................................................$14.99146640 9/16" ...............................................$15.99146641� 5/8" ............................................... $21.99�146642 3/4" .................................................$23.99

Woodthreading�KitsThis threadbox and tap, for cutting external and internal threads in wood, is useful for making clamps, jigs, fixtures, knockdown furniture, toys, and novelties. Although tra-ditional in design, modern technology and metallurgical advances have improved the traditional threadbox and tap and perfected its components. Hardwood threadbox with turned handles has an aluminum insert to prevent wear and extend the tool life. Steel tap is machined to close tolerances and designed to allow easy chip clearance. The resulting wood thread is both tight fitting and strong. Available in five sizes. Includes threadbox, tap and instructions.12T13 1/2" diameter x 8 TPI .....................$39.9912T14 3/4" diameter x 6 TPI.....................$36.9912T15 1" diameter x 6 TPI .......................$39.9912T16 11/4" diameter x 6TPI ................... $41.9912T17 11/2" diameter x 6 TPI ..................$43.5012T18 replacement cutter ......................$10.50

Bottoming�taps for cutting threads to the bottom of a blind hole. Use it after a regular tap.12T19 1/2" bottoming tap ........................$16.9912T25 3/4" bottoming tap ........................$18.9912T26 1" bottoming tap ..........................$19.9912T27 11/4" bottoming tap ......................$20.9912T28 11/2" bottoming tap ......................$20.99

WOODPECKERS®

Drill�Guides�For�Shelf�Pin�JigsUse your brad point bits to bore shelf pin holes utilizing most shelf pin jigs and templates with 3/8" diameter holes for indexing. Three steel guides in an anodized aluminum hous-ing have 1/4" projected length on one side, 1/2" projected length on the other or 3/4" projected length on one side and flush steel guide on the other. Choose the inside diameter that matches your shelf pin diameter. 1/4" Drill Guides use standard 1" center-to-center spacing while 5mm I.D. Guides use the popular 32mm spacing.151082 1/4" ID x 1/4" PL x 1" C/C ...............$24.99151083 1/4" ID x 3/4" PL x 1" C/C ..............$24.99151084 5mm ID x 1/4" PL x 32mm C/C ....$24.99151085 5mm ID x 3/4" PL x 32mm C/C .....$24.99

WOODPECKERS®

Self-Clamping�Shelf�Pin�JigsWhether you want to use your router, a self-centering bit or even a standard brad point bit using the optional Drill Guide, the Woodpeckers Self-Clamping Shelf Pin Jig does it all! Two rails are counter bored from one side to house self-centering drill bits or flip each rail over and use any 3/8" O.D. template guide bushing with a plunge router. Stops are provided at each end of the outer rails for infinite adjustment of offset from the edge of the board. A third floating rail supports your router and keeps it from tipping during plunge boring use. The clamping mechanism elevates the board above the workbench and clamps evenly from both edges to prevent cupping on boards up to 14" wide. Two different versions are available with standard 1" center-to-center spacing or popular 32mm. Optional Drill Guides utilize your common brad point bit as an economical shelf pin drilling solution.151004 32mm spacing shelf pin jig .......$129.99151005 1" spacing shelf pin jig ...............$129.99

TOGETHER, WE CAN CREATE ANYTHING TM

DOWELMAX�Precision�Engineered�Wood�Joinery�SystemCreate strong, accurate wood joints of virtually any configuration and size. Dowelmax joint configura-tions and sizes can be single, double and triple row, flush, offset, mitered, and face joints, from 1" x 1" to 1" x 12" and from 2" x 2" to 4" x 12" The patented design, coupled with rigorously main-tained manufacturing tolerances of the numerous aluminum, brass and steel components, ensures that the Dowelmax is accurate and repeatable from workpiece to workpiece. The Dowelmax Kit is a professional quality, precision engineered joining system that is intended to last a lifetime. The main body of the jig is polished 6160 aluminum and the drill guide material is carbo-nitride hardened and black oxide coated steel. All Dowelmax components are manufactured and assembled in North America.412425� Dowelmax joinery system ......... $309.99412428 repl. 3/8" drill bit & collar ..............$16.50412426� 1/4" drill guide set .........................$79.99412427�� 1/8" spacer plate ...........................$12.50

Woodboring


A

BWoodRiver®�Shelf�Pin�JigsDrill shelf pin holes for adjustable shelving in cabinets, bookshelves or AV furniture. The jig’s 3/8" guide holes align most self-centering boring bits. Standard jig has 1" spacing and can be offset either 11/2" or 21/2" from edge. Metric jig has 32mm spacing and can be offset either 37mm or 50mm from edge. Includes special pin to index the jig for longer length projects. The 1/4" and 5mm shelf pin bits, sold separately, produce crisp holes with little tear-out and can be used with either jig.150720 13-hole metric pin jig (shown) ......$17.99150721 15-hole standard shelf pin jig .......$17.99150722 (A) 1/4" drill bit ...............................$14.99150723 (B) 5mm drill bit ............................$14.99

Self-Centering�Doweling�JigsGuaranteed�Accuracy�And�Alignment!The patented automatic self-centering action of these jigs assures accurate center drilling every time, even on round objects. Large steel clamping screw tightens the tool like a vise, with rugged aluminum sides holding work securely without damage to the wood. Large 2" to 27/16" capacity on all models will handle most size requirements. Drill guide centers are hardened, guide holes are precision drilled and reamed for extreme accuracy.

(A)�Economy�Doweling�Jig has five permanent drill hole sizes: 1/4", 5/16", 3/8", 7/16", and 1/2".811564� ...................................................... $51.99

A B

Wide�Capacity�Economy�Jig. Similar to above, but with a capacity of up to 6" wide. Perfect for face work on 2x4 & 2x6 stock, even works with 4x4’s & 6x6’s.821330 ...................................................... $65.99

(B)�Deluxe�Doweling�Jig features two permanent drill hole sizes: 7/16" and 1/2" and six removable screw-in bushings for extra hole patterns. Bushing sizes are 1/4", 5/16", 3/8" (two of each). Allows drilling of two holes of the same size parallel to one another for double dowel applications on a 3/4" center to center space.811565� ...................................................... $56.99

Premium�Doweling�Jig (not pictured) is similar to the Deluxe model above, except all four holes are tapped for bushing use. Includes 1/4", 5/16" and 3/8" bushings (two of each).124315� ...................................................... $62.99

Additional�Bushing�Set for the Deluxe and Premium models include one each of the 1/4", 5/16" and 3/8" bushings.811615� .........................................................$9.99

WOODPECKERS®

Shelf�Pin�Drilling�TemplateWoodpeckers Combo Shelf Pin Template combines holes of both inch and metric spacing to work with self-centering drills bits, router guide bushings and even plain drill bits using the optional dri l l guide. CNC machined from 3/8" thick phenolic sheet with twenty-one holes on 1" spacing. Choose 11/2", 2" or 21/2" offset from edge on one side and fifteen holes on 32mm spacing with euro standard 37mm offset from edge on the other side. 3/8" diameter holes are compatible with most self-centering shelf pin bits and 3/8" OD router guide bushings for plunge boring. Includes three each 1/4" and 5mm Index Pins for setting offset and for continuous boring of long panels. Optional Woodpeckers Drill Guide utilizes your standard brad point drill bits.151136� combo shelf pin template ...........$49.99151138�� 1/4" index pins (3) .........................$14.99151137�� 5mm index pins (3) ......................$14.99151082�� 1/4" ID 1” OC Drill Guide ...............$24.99151084�� 5mm ID 32mm OC Drill Guide ....$24.99830812� 1/4" Snappy bit ..............................$26.99148011�� 5mm Snappy bit ...........................$26.99148156�� 3/8" OD Whiteside guide bushing $15.9903K33� � 1/4" Whiteside up-cut bit ..............$19.99148048� 5mm Whiteside up-cut bit�...........$21.99

GRÖZ�Bench�PlanesThese imported bench planes are manufactured to exacting standards. Frogs are well machined and adjustable for control of the throat opening, depth adjustment knob is brass, and hardwood handles and knobs have a hand-rubbed finish. All have high carbon steel irons and lever caps are chrome plated for added protection. The #3 houses a 13/4" wide iron, while the #4 and #5 have 2" wide irons; the

BA

D

#6 and #7 have a 23/8" wide iron.147636� (A)�#3 smooth, 9" ........................ $32.99145974 (B) #4 smooth, 10" .......................$29.99145975� (C) #5 jack, 14" ............................ $54.99148670� (D) #6 fore, 18" .............................$76.99148760� (E) #7 jointer, 22" ..........................$89.99

NEW�LOW�

PRICES!

E

C

Stanley�“Sweet�Heart”�Hand�Planes“A�Stanley�Tradition�since�1843”.�With this opening quote, Stanley reintroduces their Sweet Heart logo with a new line of premium hand planes. If you’re a wood-worker, finding an old Stanley tool with their Sweet Heart logo is like finding a treasure, and many consider these hand planes to be the best of the best. These new planes were created with the input of users and engineers – combining science and the art of tool making to produce the best possible tool. Each plane features an adjustable mouth, a 1 /8" thick A2 steel blade, a one-piece precision-ground frog and base casting, and a limited lifetime warranty. Instructions for care and use included.

Stanley�S.W.�Block�Planes�The 601/2� S.W.� Low� Angle� Block� Plane and 91/2�S.W.�Block�Plane feature a 21/8" wide x 61/2" ductile iron base with a 13/4" wide blade. At 2, and 2.3 lbs. respectively, both might be a tad heavy for the tool belt but the extra mass comes in handy when edge planing or doing any cross-grain work.149859 (A) 91/2 S.W. Block .......................$99.99149860 (B) 601/2 S.W. Low Angle ..............$99.99

Stanley�No.�4�S.W.�Bench�PlaneGenerally referred to as a smoothing plane, Stanley’s No. 4 is 21/2" wide x 10" long with a 2" wide blade and at nearly 5 lbs. is the perfect size for that final surface smoothing prior to applying the finish. There is also a lateral adjustment lock to ensure cut accuracy. Front knob and tote are genuine American cherry.149861 (C) No. 4 ......................................$179.99

Stanley�No.�62�S.W.�Low�Angle�Jack�PlaneThe Stanley No. 62 is 21/2" wide x 14" long with a 2" wide blade that’s installed bevel up without a cap iron. Jack planes with bevel up irons are among the most useful planes because they can be used in place of a jointer plane on short boards, and for smoothing. The front knob and tote are genuine American cherry.149862 (D) No. 62 ....................................$179.99

A

C

D

B

Planes


or heft of a larger plane. Weighing in at 5 lbs., this 97/8" long x 27/16" wide, this plane is light enough to use for longer periods, but has plenty of heft to slice through difficult grain without stopping.150874 (B) ................................................$119.99

No.�5�An all-purpose plane, the No. 5, or jack, plane can perform most planing tasks, while providing you with experience and feed back to help you pick your next plane. Nearly a full 14" in length with a 27/16" sole, this 6 lb. No. 5 is useful for stock removal, smoothing, shooting miters, and jointing smaller work.150875 (C) ................................................$134.99

No.�6�The No. 6, also called a “fore” plane is good for jointing edges and flattening and smoothing large surfaces, such as table tops, panels and workbench tops, where you might not want or need the length or weight of a larger plane. The 173/4" long x nearly 27/8" wide sole enables it to shave bumps and bridge over valleys 7/8" wide better than a shorter plane. Weighing in at a stout 73/4 lbs., this plane’s additional heft makes it easier for you to shave difficult stock without breaking a sweat.150876� (D) ................................................$154.99

AB

C

DWoodRiver®�V3�Bench�PlanesIntroducing the New and Improved Version 3WoodRiver® Bench Planes.

Our new Version 3 bench planes are still based on the reliable Bedrock design and feature heavy, stress- relieved, ductile iron castings, fully ma-chined adjustable frogs and A-2 blades but we took the opportunity between manufacturing runs to conduct a critical review and incorporate a few improvements. We’ve changed the shape of the rear tote for a more comfortable grip and increased the diameter of the blade adjustment wheel for easier blade advancement. A more robust lateral adjust-ment lever, with a traditional style bearing provide better blade control and improved castings result in better “feedback” to the user. Working closely with the manufacturer, we’ve continued to make improvements in machining, finish and functionality to produce hand planes that are meant to be used and offer an extraordinary value.

No.�3��Slightly smaller and lighter than the No 4, this plane is well suited for smoothing smaller surfaces, or maneuvering around troublesome grain. Slightly longer than a block plane, the tote makes it more comfortable for extended use. The 95/16" long x 21/4" plane partners perfectly with the longer No. 5. Wt. 41/2 lbs.150873 (A) ................................................$114.99

No.�4�A versatile tool, the No. 4 ideal for smoothing and other light jobs where you don’t need the length

Replacement�Plane�BladesFor�Lie-Nielsen®® StylePreviously available only as original manu-facturers equipment, these planes blades were designed for and are 100% compatible with the Lie-Nielsen planes below. Al l blades below are A-2, Rc 60-62.150059 #1 ............................................... $35.99150060 #2 ............................................... $35.99150061 #3, 51/4 .......................................$39.99150062 #4, 5 ............................................$39.99150063 #41/2, 51/2, 6, 7 jointer ................$50.99150065 #8 jointer ................................... $55.99150066 #101/4 bench rabbet ................ $56.99150067 low-angle #102/103 block .......$30.99150068 adjustable-mouth block ........... $35.99150069 rabbet block ...............................$40.99150070 low-angle smoothing .................$40.99150071 low-angle jack ............................$40.99150072 low-angle jointer ....................... $55.99150073 small scraping............................$25.99150074� large scraping ............................$40.99150075 cabinetmaker’s scraper ............$40.99150076 1/2 inch shoulder ....................... $35.99150077 small shoulder .......................... $35.99150078 medium shoulder ..................... $35.99150079 large shoulder ........................... $44.99150609� #102, #103 block ...................... $61.99150614� #164 smoothing .........................$49.99150615� #164 smoothing, toothed .........$80.99150610� #140 right skew ......................... $51.99150616� iron mitre ....................................$49.99150617� #62 la jack 90° .........................$49.99150623� #97 large chisel ..........................$49.99150624� #971/2 small chisel .....................$44.99150626� #401/2 scrub ...............................$39.99150632� #112 lg. scraper toothed 18tpi $74.99150633� #112 lg. scraper toothed 25tpi $74.99

Replacement�Plane�BladesFor�Veritas®®��StyleCompatible with the Veri-tas® planes below. All blades are A-2, Rc 60-62 unless noted. 0-1 blades are Rc 58-60.150007 bevel up jointer ..........................$39.99150008 bevel up jointer, toothed ...........$49.99150009 #4, 51/4 ...................................... $44.99150010 #6, 41/2 ...................................... $56.99150011 scrub .......................................... $42.99150012 DX/NX60 ................................... $32.99150013 low-angle smooth ..................... $32.99150014 low-angle smooth toothed ........$37.99150015 low-angle block ......................... $32.99150016 low-angle block toothed ...........$37.99150017 apron ..........................................$23.99150018 apron toothed ........................... $32.99150023 iron edge trimming ....................$24.99150024 bronze edge trimming ...............$24.99150025 flush plane..................................$19.99150026 large shoulder ........................... $41.99150027 medium shoulder ..................... $35.99150028 bullnose ......................................$39.99150029 side rabbet, left, O-1 ................ $11.99150030 side rabbet, right, O-1 .............. $11.99150032 skew rabbet, left ....................... $36.99150031 skew rabbet, right..................... $36.99

Replacement�Blades�For� Stanley/Record�StyleU p g r a d e y o u r a n -tique tools with these blades that have been designed for the Stan-ley tools listed below. All blades are A-2, Rc 60-62, and a hefty 0.095" thick.150592� Stanley/Record #3, #51/4 .........$49.99�

150047 Stanley/Record #4, #5 ............ $45.99150048 Stanley/Record #41/2, #6, #7 .. $55.99150049 Stanley/Record #8 ....................$60.99150050 Stanley #10, #101/4, #101/2 .... $62.99150051 Stanley #51/2 ............................. $55.99150052 Stanley #91/2 block, 3-slot ........$40.99150053 Stanley #91/2 block, 11-slot ......$40.99150054 Stanley #601/2 block, 3-slot......$40.99150055 Stanley #601/2 block, 11-slot ....$40.99150056 Stanley #140 block ...................$49.99150057 Stanley #62 block ..................... $45.99150058 Stanley #97 large chisel ...........$40.99150035 Stanley #51/52 spokeshave ... $18.99150590�� Stanley #1 ..................................$44.99�150591� Stanley #2 ..................................$49.99150593� Stanley #102 block ....................$39.99150594� Stanley #103 block ....................$44.99150600� Stanley #112 ..............................$49.99

PINNACLE®® Plane�BladesWorking together with renowned blade manufac-turer, IBC, Woodcraft is proud to introduce the new line of Pinnacle® plane blades. The evidence of IBC’s plane blade manufacturing expertise is extensive, but its name is still vastly unknown to woodworkers. Woodcraft is proud to finally, and formally, introduce IBC to the woodworking world. Instead of being the best-kept secret in woodworking industry, the goal of the IBC brand is to become synonymous with “the best plane irons in woodworking”. Match these blades against any other manufacturer… you will not regret it. You won’t need to examine the factory edge under a microscope to see that these blades are superior, you’ll feel it the first time you use one! All blades 100% Made in Canada.

• Honed Razor-Sharp – No Honing Required! “Will Shave Hair Out Of The Box”• A-2 Tool Steel, unless noted • Double Tempered to 60-62 Rc, unless noted• Fully Stress-Relieved • Air Hardened• Cryogenically Treated • Fully Demagnetized• Precision Ground Top/Bottom• Precision Ground/Hand-Polished Sides• Micro-thin Film, Water Soluble Rust Inhibitor With Rust Inhibitor Paper Wrap

If�you�need�assistance�selecting�the�proper�blade�for�your�tool,�contact�our�

Technical�Service�Department,�800�535-4486


WoodRiver®�SpokeshaveThe WoodRiver® shave is a robust casting of ductile iron featuring a high carbon RC60-64 blade and an adjustable front shoe to control the depth of cut.

The heavy (1.05 lbs.) cast iron body actually increases tool control, making it easier to shave with one or two hands. This, combined with the adjustable shoe for depth control will make this one of your favorite hand tools.150740 (E) ..................................................$49.99

Planes


PINNACLE®/IBC �Replacement�Spokeshave&�Scraper�Blades�For�Veritas®® StyleScraper blades are High Carbon Steel, Rc 48-51 unless noted. All other blades are A-2, Rc 60-62. Chair Devil set includes 1/2", 7/8" and 11/4" radius blades. Chairmaker’s set includes 1/2", 7/8" and 11/4" concave; and 11/2" convex blades.150019 scraping, A-2 .............................. $32.99150020 scraping HCS ..............................$14.99150021 scraping toothed, A-2 ................ $43.99150022 small scraping, HCS .................. $11.99150033� large spokeshave .......................$24.99150034 pullshave .....................................$29.99150036 flat spokeshave ......................... $21.99150037 concave spokeshave .................. $27.99150038 low-angle spokeshave ................$19.99150040 magnetic corner chisel ............. $32.99150043 chair devil, set of 3, HCS .......... $35.99150044 scraper shave, HCS ......................$9.99150045 4-pc. chairmaker’s scraper, HCS $30.99150046 chairmaker’s scraper, straight blade ... HCS ................................................$8.99

HOCK�Blades�And�ChipbreakersHandmade and 17% thicker than standard blades, allowing closer throat-opening settings, finer shav-ings, and reduced chatter. High carbon (.95%) tool steel and hardened to Rc62, they hold a razor-sharp edge. Fits Stanley, Bailey, Record, Footprint, and most other planes. 3/32" thick, USA, honing required before use. Bench�Plane�Blades are 7" long.04B21 13/4" blade ....................................$35.5004B22 2" blade ......................................... $37.5004B23 23/8" blade ....................................$40.9904B25 2 5/8" blade ....................................$45.99Block�Plane�Blades are 41/2" long with rear depth adjustment grooves. Wide-slot blades only fit the new Stanley block planes.04B34 13/8" blade ................................... $35.9904B35 15/8" blade ....................................$37.9904B36 13/8" wide-slot blade ................... $34.9904B37 15/8" wide-slot blade ................... $35.99Spokeshave�Blade is 17/8" long.04B33 21/8" blade ....................................$30.99HOCK� Chipbreakers. Upgrading your plane with a Hock Blade? Add one of their Chipbreakers for the ultimate plane blade tune-up! Most standard chipbreakers are only .065 to .070" thick – too thin to add much strength. Hock Chipbreakers are .118" (3mm) thick for added mass, rigidity and support for the cutting edge.144182 13/4" chipbreaker ....................... $32.99144183 2" chipbreaker ........................... $32.99144184 23/8" chipbreaker ....................... $32.99

STANLEY�SpokeshavesA d j u s t a b l e blade spoke-shaves are made of du-rable mallea-ble iron with two adjusting sc rews fo r vertical and lateral blade adjustments. The flat face trims flat and round stock while the curved face cuts a concave surface. Over lengths 10”, blade widths 2”. Honing required before use.827102� flat face ........................................ $31.99827103� round face ................................... $31.99

A

B

KUNZ�Spokeshaves(A)�Half-Round�Spokeshave with a concave face blade for easy shav ing o f round stock. Length 10", blade width 21/16". Honing is required before use.16B02 ....................................................... $27.9916G13 replacement blade ......................... $9.99

(B)��Radius�Spokeshave. Sole and blade are ground to a 2" radius for smoothing concave surfaces. Length 10", blade width 21/16". Honing required before use.01T11 ....................................................... $27.9901T12 replacement blade ......................... $9.99

PINNACLE®/IBC �Matched�Chip�Breaker�&�Blade�Sets�For�Lie-Nielsen® &�Veritas® StyleBench�Planes�Performance begins with the blade. IBC blades are the best kept secret in the industry and as they continue their quest for perfection, they real-ized that better blades deserved a better chipbreaker. The innovation starts with design and materials: O-1 Steel is hardened to 30-32HRc then precision machined and sharpened to provide a durable, perfectly-mating edge that fully supports the blade. This greatly reduces vibration and chatter which leads to a finer, consistent shaving. Each chipbreaker is matched - ground and serialized to its blade at the time manufacture for a perfect match. The sides are precision ground and hand polished to a beautiful finish. Made in Canada.PINNACLE®/IBC�for�Lie-Nielsen�Style150893� 13/4" W for #3, #51/4 .................... $74.99150894� 2" W for #4 & #5 ......................... $74.99150895� 23/8" W for #41/2 ®, #51/2 ®, #6 & #7 $89.99

PINNACLE®/ IBC�for�Veritas�Style150891� 2" W for #4 and #5 ......................$79.99150892� 23/8" W for #41/2® ...........................$99.99

PINNACLE®/IBC�Matched�Chip�Breaker&�Blade�Set�For�Stanley�Style�Bench�Planes�Revive your Antique Stanley/Bailey hand plane with these premium Blade and Chipbreaker Sets. Premier quality A-2 Pinnacle/IBC blades have been matched with an innovative chipbreaker design that can give your plane performance that rivals modern high end tools. These replacement sets are over 65% thicker than the original equipment and are match-ground and serialized at the time of manufacture. Hardened O-1 Chipbreaker with precision ground edge provides superior support for the blade. These features provide for a heavier and stiffer blade which reduces vibration and chatter, leading to improved per-formance. Exclusively designed Chipbreaker� Blade� Adjustment Tabs (A) allow thicker premium blades/chipbreakers to function in antique planes. Minor modifica-tion may be required to the plane’s mouth opening to accommodate this blade. Made in Canada.For a limited time, each set includes “The Great Hand Plane Revival with Rob Cosman” DVD, taking you through 11/2 hours of complete hand plane tune up information. $32.50 Value.150812�� 13/4" W for #3 & #51/4 ..................$99.99150813�� 2" W for #4 & #5 ..........................$99.99150814�� 23/8" W for #41/2, #51/2 #6 & #7 $104.99150791�� The Great Hand Plane Revival ............... DVD ...............................................$32.50

A

HOCK�A2�Cryogenically�Treated�BladesCryogenically treated blades let you use your plane more and sharpen less! The tool steel known as A2 has a great reputation for its superior edge hold-ing properties. Renowned blade maker Ron Hock has gone one step further to cryogenically treat A2 blades. This extreme cold treatment (-320°F) increases the steel’s toughness without any decrease in hardness. You get improved wear resistance without any increase in brittleness, so a Cryogenically treated blade will hold its edge longer. What does all this mean to you? Simply, that you can keep working instead of sharpening! Fits Stanley, Bailey, Record, Footprint, and most other planes. Honing required before use.

Bench�Plane�Blades142441� 13/4" blade .................................... $47.00142442 2" blade .........................................$48.00142443 23/8" blade ....................................$49.00142444� 25/8" blade ....................................$50.00

Block�Plane�Blades are 41/2" long with rear depth adjustment grooves. Wide slot blades only fit the new Stanley block planes.142445 13/8" blade ....................................$45.00142446 15/8" blade .................................... $47.00142447 13/8" wide slot blade ....................$45.00142448� 15/8" wide slot blade .................... $47.00

Spokeshave�Blade is 17/8" long.142494� 21/8" blade ....................................$40.00


Timber Framing


Two� Man� Crosscut� Saw. Whether you’re building a timber frame home or cutting a few pieces of firewood, this saw will make short work of slicing through the toughest wood. The 4 ft. German blade is hand sharpened and set, ready to take on the heaviest cutting jobs. Overall length 52" with 81/2" hardwood handles.144795� ........................................................$92.50

Timber�And�Log�SawsOne�Man�Crosscut�Saw. Perfect for timber framing, log building, or any heavy cutting job. Use the start-ing teeth to introduce a kerf, then the 3 TPI main teeth, which cut on both the push and pull stroke, to quickly slice through the toughest jobs. This heavy duty, hand hammered German saw has a 32" blade.03P52 .........................................................$76.99

(C)�Rabbet�Plane�No.�92 is a larger version of the No. 90. The longer body aids in finer cutting action and control. It has an adjustable mouth and it can be made into a chisel plane. 51/2" long, cutter width 3/4". Honing required before use. UK.02G30 ......................................................$124.9902G31 replacement iron ........................... $14.99

STANLEY�Rabbet�Planes(A)�Bullnose�Rabbet�Plane�No.�90. Sides are ground flat and at a right angle to the bottom. Mouth adjusts for coarse or fine work, and the entire top can be removed for conversion to a chisel plane. The 4" long body is nickel-plated to prevent rusting. 1" cutter requires honing before use. UK.02G20 .................................................... $112.9902G21 replacement iron ........................... $19.50

(B)�Rabbet�Plane�No.�93 is similar to the No. 92, except for size. Body is 61/2" long, cutter 1" wide. Honing required before use. UK.02G40 ......................................................$129.9902G21 replacement iron ........................... $19.50

A

C

B

STANLEY�Block�PlanesThese versatile planes feature newly designed lateral iron adjust-ment levers, adjustable mouth, brass knobs, heavy body castings, accurately ground surfaces, and black enamel finish. Body length 61/4". Replacement blades fit these new planes only (not for old Stanley models). Honing required before use.

(A)��STANLEY�Block�Plane�No.�91/2�for general repairs & finish planing. 15/8" wide iron is set at 21°.17S62� .............................................................................$44.99

(B)�STANLEY�Block�Plane�No.�601/2 with low 12° angle. Blade cleanly cuts end grain, interlocking grain, or any problem stock. Iron width 13/8".17W42� ...................................................................................................................................................$44.99

A

B

GRÖZ�Block�PlanesOne of the handiest tools in the shop, a block plane is commonly used to break sharp edges, trim and fit joints and clean up end cuts. Our Gröz planes feature heavy cast iron bodies, accurately ground surfaces, lateral adjustment levers, and black enamel finish. The Low Angle Plane has a 13/8" iron set at 12° and an adjustable throat. The Standard Plane has a 15/8" iron set at 21°. Body length of both is 7". Honing required before use.146074 low angle block plane ................ $31.99146075� standard block plane .................$30.29

WoodRiver® No.�80�Cabinet�ScraperProduces a glass smooth finish on straight grained as well as highly figured woods. Thumbscrew adjust-ment can be set to cut a fine shaving or tightened to produce a coarse cut. Sole is 84mm (31/4") x 68mm (25/8"). 149157 ........................................................$29.99

GRÖZ�Duplex�Rabbet�PlanePatterned after the Record 078, this plane is used to make rabbets with or across the grain. For clean cuts, this plane is furnished with a round nicker, or cutting spur, for scoring the grain ahead of the blade in cross grain cuts. The 3/32" thick blade is lever adjusted in the rabbet position, and can be repositioned on the front end of the plane for bullnose work. An adjustable depth stop can be positioned for a depth of cut up to 1/2" and the single post fence can be installed on either side. 11/2" wide blade, 81/2" sole, 10" overall length.148671� .........................................................$79.99

Shingle�FroeThis is the tool used by colonial settlers to split shingles, shakes, and lumber for homes in early America. Today the shingle froe is still a primary tool in many tradit ional woodwork-ing projects which require riving, like Windsor chair spindles and spoons. Simply pound the blade of the froe into the end of a short log with a mallet or maul, then pull back on the handle to split off a slice of the wood with the grain. Handle is 18" long; blade is 15" long and 2" deep. Roughly finished. Made in USA. 147901 .........................................................$49.99

Framers�2"�Chisel�And�Holster�SetWe’ve taken our most popular timber framing socket chisel and combined it with a rugged canvas holster especially made to protect it. Holster is reinforced with a thick cotton webbing liner and extra tip pad to prevent cutting through.03L73 2" chisel......................................$136.9903L61 holster .......................................... $20.9903M30 2-piece set Save Over $22! ....$134.99

Dual�Blade�Tenon�CuttersFaster�Cutting,�Safer�To�Use�And�Longer�Lasting!With our new cutters you’ll consistently cut accurate tenons. The dual precision-ground blades cut twice as fast, retain their sharpness longer, never rust or clog, and generate less heat for long-lasting service. The “In-Sight” measurement system has slots and radial grooves set at 1 /2" intervals – so you can eliminate manual re-measuring and re-cutting. Blades are made of rust-proof, hardened carbon steel. Self-centering design produces perfectly shaped tenons every time. Body is CNC machined from solid 6061 aircraft aluminum for maximum strength with minimum weight while 1/2" shanks are made of 303 stainless steel. For use on limbs up to 31/2" in dia.147363� 1/2" tenon diameter .....................$94.99147364� 3/4" tenon diameter .................. $134.99147365� 1" tenon diameter .................... $144.99147366� 11/2" tenon diameter ................ $164.99147367 2" tenon diameter .................... $184.99147368� blade sharpener ..........................$39.99

COUNT ON US FROM START TO FINISH TM

Chisels


WOODCRAFT Socket Firmer ChiselsT h e s e h e a v y duty chisels have thicker and longer sockets for added durability. Forged from a solid piece of high carbon alloy tool steel then careful ly hardened and tempered fo r extended edge sharpness. The best chisels avail-able for timber framing and other demanding cut-ting jobs. Blade lengths are 7" to 8"; overall lengths 15" to 17"; with a sturdy ash handle with steel ferrule. Set of four includes 3/4", 1", 11/2", and 2". Honing required before use.04M60 set of 4 Save Over $65! .........$409.9903L33 1/2" ...............................................$104.9903L44 3/4" ...............................................$104.9903L45 1" .................................................$109.9903L72 11/2" .............................................$131.5003L73 2" .................................................$136.99

Replacement Socket Chisel Handles03F52 1/2", 3/4" and 1" ............................. $13.9903F72 11/2" and 2" ................................... $14.99

BARR Timber FramingChiselsBarr Quarton has been work-ing with tool steel for over 18 years, and has applied his knowledge and skill to making the finest hand forged, individ-ually tempered, woodworking tools available. In a day and age where most tools are drop forged, stamped or cut out and then poorly tempered, a major-ity of people have never had the pleasure of using a hand forged tool. Hammer forging packs the steel producing a very fine-grained, dense metal. This process also in-troduces more carbon into a smaller area. As a result you get a blade with remarkable edge holding ability without being brittle. Chisels feature fitted socket handles, steel ferrules, and are delivered shaving sharp!145009 2" framing chisel .......................$129.99145010 11/2" framing chisel ................... $129.00145008 11/2", #5 sweep gouge .................$94.99149506 25/8" large slick ..........................$166.00

Leather Tip Guards and Holster. Made from heavy saddle grade leather and hand stitched. Both the tip guards and holster are furnished with an ABS plastic insert to protect the leather and the tool.145011 leather chisel tip guard ................$19.99145012 leather chisel holster ...................$34.99

SORBY Cabinetmaker’s Bench ChiselsFeature classic octagonal boxwood handles – the old favorites of yesteryear’s discerning craftsmen. The unique “London pattern” of handle with turned finger contours, flat milled body, and graduated siz-ing, promotes a more positive and natural grip for controlling your cuts. Fitted to finely machined bevel edged blades, each tool has a leather “anti-shock” washer between bolster and handle, and brass ferrules to prevent handle splitting. Each chisel is individually inspected and hardness tested to ensure you get a tool of the highest quality. Overall lengths 93/4" to 123/4", blade lengths 4" to 43/4". Set of four includes: 1/4", 1/2", 3/4", and 1".07F20 set of 4 Save Over $35! ......... $164.99123413 set of 9 Save Over $83! ........ $469.9907F21 1/8" ................................................. $63.9907F22 1/4" ................................................. $43.9907F23 3/8" ................................................. $43.9907F24 1/2" ................................................. $48.9907F25 3/4" ................................................. $49.9907F26 1" .................................................... $57.9907F27 11/4" ...............................................$71.9907F28 11/2"............................................... $82.5007F29 2" ................................................... $89.99

CROWN Classic Bench ChiselsThere is no substitute for high quality, well made, comfortable to hold bench chisels. These chisels feature polished and beveled Sheffield steel blades fitted with comfortable, well shaped Rosewood handles. Blade length from 41/2" to 5", handle length 51/2". Set of four includes 1/4", 1/2", 3/4" and 1" chisels. Honing required before use.129479 1/8" ................................................$22.99129286 1/4" ................................................$22.99129470 3/8" ................................................$22.99129287 1/2" ................................................$22.99129471 5/8" ................................................ $27.99129288 3/4" ................................................$26.99129472 7/8" ................................................$26.99129289 1" ..................................................$29.99129473 11/4" ..............................................$29.99129474 11/2" ............................................. $31.99129290 set of 4 Save Over $10! ...........$89.99

Japanese Chisels & HammersJapanese Bench Chisels. Made of durable high carbon steel, laminated onto a softer steel back for added strength, these bench chisels sharpen easily and hold an edge longer than Western chis-els. Japanese chisels are individually tempered to Rc 62-64 by a master craftsman, sharpened to a razor edge and fitted with a hand-forged, hooped Japanese Red Oak handle. 9" long with a 21/4" blade length. The 4-pc. set includes 6, 12, 18 & 24mm chisels, the 10-pc. set includes 3-36mm.140582 3mm ............................................. $42.50140570 6mm ............................................. $42.50140571 9mm ............................................. $42.50140572 12mm ........................................... $42.50140573 15mm ........................................... $42.99140574 18mm ........................................... $48.99140575 21mm ........................................... $48.99140576 24mm ........................................... $54.99140577 30mm ........................................... $58.99140578 36mm ........................................... $58.99140579 42mm ........................................... $64.99140580 48mm ............................................$79.99140620 4-pc. set Save Over $43! ......... $144.99140581 10-pc. set Save Over $81! ..... $399.99

Japanese Shop Hammers. The heads, made of tool steel, are forged, etched, and chrome plated to be both beautiful and durable. Fitted with Japanese White Oak handles.140568 4 oz. ...............................................$29.99140569 13 oz. .............................................$38.99

Quick Cutting Corner ChiselPerfect for squaring up “round cor-ners” on hinge mortises, our spring loaded chisel is made of hardened steel and is sharp, ready to use right out of the box. Tap lightly with a hammer and you have a perfectly squared corner. Cutter is 3/8" x 3/8" and a perfect 90°.143717 economy corner chisel .................. $9.9924Z25 Whiteside corner chisel ............... $29.99

Solid Brass Chisel HammersSolid brass heads feature a domed face which helps prevent striking off center and deforming the heads of your chisel handles. Available in two weights for light or medium chisel work, approximately 8” overall length.145811 9 oz. .............................................. $26.99145812 14 oz. ............................................ $26.99

Chisels


PFEIL Swiss Made Bench ChiselsFrom The Makers Of The Worlds Finest Carving ToolsWe are proud to offer the first Swiss made Bench Chisels from pfeil. The lacquer-finished, contoured handles fit the hand nicely and feature a top ferrule to withstand heavy mallet blows. Blades are made of Swiss alloy tool steel and heat-treated using the latest technology to produce excellent edge-holding characteristics. Cutting edges are finely ground and polished for easy resharpening. These chisels may require slight honing to suit personal preference, but they tend to be razor-sharp, ready to go right out of the package! Overall 101/4" to 111/4", blade lengths 43/4" to 53/4". The 4-pc. set includes 1/4", 1/2", 3/4" and 1", the 8-pc. set adds the 5/32", 5/16", 3/8" and 5/8" chisels. The 6-pc. boxed set includes 1/4", 3/8", 1/2", 5/8", 3/4" and 1" chisels. Complete your PFEIL chisel set with a red and white Swiss flag inspired chisel roll.05T15 4mm (5/32") ................................... $32.5005T16 6mm (1/4") ..................................... $34.5005T24 8mm (5/16") ................................... $32.5005T18 10mm (3/8") .................................. $32.5005T19 12mm (1/2") .................................... $37.5005T20 16mm (5/8").................................... $37.9905T21 19mm (3/4") ....................................$37.9905T22 26mm (1") .................................... $39.5005T23 32mm (11/4") ................................ $41.9905T26 35mm (13/8") ................................ $46.9905T27 40mm (19/16")............................... $50.5005T30 4-pc. set Save Over $39! ......... $109.9905T29 6-pc. boxed set Save Over $44! $174.9905T32 8-pc. set Save Over $74! .......... $209.9905T28 11-pc. set Save Over $124! ..... $299.99125288 PFEIL chisel roll ............................ $24.99

pfeil®

Precision Crafted Dog Leg ChiselsOffset 11/4" long tool steel blades have 5/16" cutting edges tapered back to their necks for the proper undercutting clearance in, jointwork and sizing operations. 33/4" hardwood handles. Factory sharp-ened and ready for use.11Q10 set of 3 Save $3! ..................... $34.9911Q51 straight chisel ..............................$12.9911Q52 right skew .....................................$12.9911Q53 left skew .......................................$12.99

IRWIN/MARPLES Blue Chip Bench ChiselsThese bevel-edged chisels are hardened and tempered under controlled conditions and accu-rately ground for precise control. Handle is square with rounded corners for comfort and to prevent rolling; made of indestructible polypropylene to withstand heavy mallet and hammer blows. Overall lengths 93/4"-11"; blade lengths 31/2" to 41/4". Set of six, in a wooden box, contains one each as follows: 1/4", 3/8", 1/2", 3/4", 1" and 11/4". The complete eight piece set is not available as a boxed set. Honing required before use.12G11 1/8" ................................................. $12.9912G21 1/4" ................................................. $12.9912G31 3/8" ................................................ $12.9912G41 1/2" ................................................. $13.9912G51 5/8" ................................................ $14.9912G61 3/4" ................................................. $15.9912G71 1" ....................................................$17.9912G81 11/4" .............................................. $19.99111165 4-pc. set - 1/4", 1/2", 3/4" & 1" ...... $41.50 12G15 6-piece boxed set ........................ $69.99 12G20 set of 8 Save Over $36! .......... $84.99

PINNACLE®

Leather Chisel RollThis premium leather tool roll will organize and pro-tect your carving tools or bench chisels. Two rows of pockets hold up to 18 tools with a protective liner in the bottom of each pocket to help prevent tools from cutting the leather. The 21" x 11" roll features flaps on three sides, to prevent tools from sliding out while transporting them, and extra-long tie straps to wrap and secure the roll. 149424 ......................................................$59.99

PFEIL Swiss Made 6-Piece Bench Chisel SetDeveloped over the last two years and one of the last projects our friend and colleague Tim Rinehart worked on before his passing, these new Limited Edition Swiss made chisels are really special. First, they’re crafted from the finest Swiss Tool Steel, expertly ground on all sides with a 25° main bevel and a 30° micro bevel on the cutting edge. But what good is a blade without a proper handle? In this case, Elm was chosen for its’ beauty while an octagonal shape with a slight ovoid is used for improved control and comfort. The overall effect is the perfect union of old world craftsmanship, modern materials and the desire to create (what we think) may just be the perfect bench chisel. Set includes the following: 6mm, 10mm, 12mm, 16mm, 19mm and 26mm chisels and a tool roll. 05B54 .......................................................$199.99

PFEIL® Swiss MadeButt ChiselsButt chisels are easier to control in joinery ap-plications than full-sized bench chisels. The faceted, contoured European Locust handles fit the hand comfortably but prevent the chisels from rolling off your bench. Blades are made of Swiss alloy tool steel and heat-treated using the latest technology for excellent edge holding. Chisels are ground and polished from the maker. Overall lengths are 6", blade lengths 33/8". The set includes 6mm (1/4"), 12mm (1/2"), 19mm (3/4"), and 25mm (1") chisels and includes a fitted wooden block to safely store and protect your chisels.05B12 4-pc. set Save Over $17!. .......... $104.9905B13 6mm (1/4"). .................................... $28.9905B14 12mm (1/2"). .................................. $30.9905B15 19mm (3/4"). .................................. $30.9905B16 25mm (1") .................................... $31.99

WoodRiver®

4-Piece Butt Chisel Set Beautifully crafted, well balanced 4-piece butt bench chisel set. CRV steel blades hardened to RC59-63 with steel ferrules and nicely finished off with genuine Bubinga handles. These little beauties are truly fun to use. Like they’re bigger brethren, they look impressive to the eye and really perform under use. Set includes 1/4", 1/2", 3/4" and 1" chisels. Overall length 61/2" with blades 23/8" long. Honing required before use.152169 .........................................................$49.99

WoodRiver®

6-Piece Chisel SetBeautifully crafted, well balanced 6-piece bench chisel set made by the same folks making the WoodRiver® hand planes. CRV steel blades hard-ened to RC59-63 with steel ferrules and nicely finished off with genuine Bubinga handles which are as much a joy to the eye and as they are to hold. Set includes 1/4", 3/8", 1/2", 5/8", 3/4" and 1" chisels. Overall lengths 91/2" to 101/2" with blades lengths from 31/2" to 4". Honing required before use.151268 .........................................................$79.99

Chisels


Rob Cosman has been woodworking for most of his life. While earn-ing a B.Sc. in Industrial Technology / Furniture Design at Brigham Young University, he was Dr. Dale L. Nish’s teaching assistant. Rob has also worked with many of the world’s best craftsmen – including Alan Peters, Sam Maloof, Tage Frid, Monroe Robinson and Peter Korn.

Scraping Wood DVDA well-sharpened cabinet scraper is a pleasure to use and can provide a superior f inished product. Rob Cosman coaches you through the steps of tuning, sharpening and using card scrap-ers, cabinet scrapers and scraper planes. 1 hour, 30 minutes.842421 ......................... $32.50

Rob Cosman’s Dovetail Degree DVD SetThe Dovetail Degree includes all 3 Dovetail DVD's, plus the Hand Cut Dovetails Shop Copy book. 150093 SAVE $7! .................................. $91.99

Hand-Cut Dovetails DVDRob provides bench-side instruc-tion on cutting “through-dovetails”, from tool selection to assembly using methods and a teaching style that's helped thousands learn how to cut what many consider the crown jewel of woodworking, the dovetail. 45 minutes.833847 ............................$25.00

Hand-Cut Dovetails Shop CopyA companion to the Hand-Cut Dovetails DVD, Hand-Cut Dovetails Shop Copy is a full-color, instruction manual. 84 pages with captioned photographs.840743 ...........................$24.95

Advanced Hand-Cut Dovetails DVDBench-side instruction on hand-cutting hounds tooth, half-blind and mitered edge dovetails. Building on Hand Cut Dovetails Rob takes you through the more difficult variations of the joint one step at a time. 60 minutes.830245 .............................$25.00

Wood-Hinge Box, DVD And Jig SetCombine the Wood-Hinge Box DVD and Wood Hinge Drilling Jig. (147885 & 842840 above)150092 SAVE over $6!.......................... $58.99

Rough To Ready DVDWhile you may or may not wish to dimension all your lumber by hand, knowing how is a valuable skill when power tools are not an option. Rob takes a piece of rough Mahogany through the paces of becoming straight, flat and true on all six surfaces. 47 minutes.829247 .........................$25.00

The Wood-Hinge Box DVDLearn how to make the jigs to turn would-be scraps into beautiful wood-hinged boxes. Emphasis is placed on constructing the con-cealed wood hinge with options shown on completing the most difficult tasks. 1 hour, 40 minutes.147885 ...........................$32.50

Drawer Making – The Professional Approach DVDBench-side instruction on making piston-fit drawers using time-tested methods of making drawers that move with piston-like precision. This DVD teaches you how to gain this hallmark of craftsmanship. Double DVD Set. 2 hours, 15 minutes.834792 .........................$40.00

Wood-Hinge Drilling Jig The key to making Rob’s wooden hinge boxes is creating the wooden hinge. Using this jig and a 3/8" chuck drill you will create per fect wooden hinges every time. The jig centers the dowel before it engages the 1/16" bit, resulting in a perfectly centered hole. 842840 ....................................................$32.99

Hand Planing And Sharpening DVDRob walks you through the sharpening and use of four basic shop hand planes, the block, the smoother, the jointer and the rabbet plane. 45 minutes.833932 ........................$25.00

Mastering The Dovetail Saw DVDMastery of Dovetailing starts with good sawing techniques. This DVD features saw cut to saw cut joinery, choosing a saw, saw sharpening and tuning, sawing grip and stance, 5 “P’s” to sawing, splitting the line, saw starting exercises, and vertical sawing exercises. 42 min.835723 ............................$25.00

Hand-Cut Dovetails SetIncludes the Hand-Cut Dovetails DVD and Hand-Cut Dovetails Shop Copy manual. 840744 SAVE $2 .......$47.95

Hand-Cut Mortise And Tenon DVDRob guides you through the process of execut ing the essential mortise and tenon joint with hand tools. Using a mortise chisel and mallet for the mortise and a tenon and a carcase saw for the tenon. Double DVD set. 2 hours, 10 minutes.834793 ..........................$40.00

Rob Cosman’sProfessional Dovetail SawTo enable woodworkers to assemble their dovetails straight from the saw, Rob has designed and devel-oped this dovetail saw. The first two inches of the blade has 22 TPI for ease of starting the cut, while the remainder of the blade has 15 TPI for finishing the cut quickly. With an extra-heavy brass back and an overall weight of 22 oz., the saw itself provides the downward pressure for smooth, vibration-free cuts. Composite handles, in bone or ebony resin, have carved finger recesses for a comfortable fit. A slight .002" (per side) set makes for dead straight saw cuts and produces a .024" kerf. Each saw is personally tested by Rob, and comes in a beautifully hand-crafted Walnut and Birch case. Overall length is 151/8", blade length is 10″", cutting depth is 15/8".843975 bone resin ................................. $249.99150090 ebony resin, shown .................. $249.99

Rob Cosman’s Professional Crosscut Joinery Saw“Teaching folks to make woodworking joints from the first cutting tool, the saw, is what I consider to be an essential part of good craftsmanship. To that end I have designed and built these saws to make this possible.” Based on lessons learned while logging thousands of teaching hours, across three countries, Rob built a crosscut saw for the hand tool woodworker. A .002" set produces a beautifully thin .024" kerf and the quick cutting 15 TPI blade will leave the cleanest tenon shoulders you have ever seen. Carved finger recesses and an extra heavy brass back will provide a perfect fit and balance. Each saw is personally tested by Rob prior to shipping and comes in a beautifully hand crafted Walnut and Aspen presentation/storage case. Overall saw length is 151/8", blade length is 10", cutting depth is 15/8".150761 bone resin, shown .................... $249.99150762 black resin ................................. $249.99

The Great Hand Plane Revival DVD With Rob CosmanRob coaches you through reworking every part of the plane, explains their functions, potential weaknesses and recommends modern day so-lutions. You’ll see him use the Pinnacle Matched Blade and Chipbreaker, a unique that al-lows old planes to be retrofitted with 9/32" thick blade/breaker combination. The addition of Blade Adjustment Tabs allows the use of thicker, premium blades in these old gems, and you'll be making shavings of less than a thousandth of an inch in no time! 90 minutes.150791 .........................................................$32.50

Rob Cosman's Dovetail MarkerRob’s dovetail marker allows you to lay out both the angled face and the squared end cuts. Made from Eastern Maple, Rob planes the angles on a shooting board to ensure accurate gauges. One side is 1:6 for lay outs on softwoods, the other side is 1:7 for hardwoods. The top of the gauge is wide enough to mark 13/16" material.842423 .....................................................$24.95

Hand Tool Mastery

Woodturning


GENERAL25-024�Mini�Lathe�Duplicator�Designed specifically for mini or midi style lathes with shorter beds than a standard full size lathe, and fits most bench-top or midi-lathes with cast iron bed-ways and a 6" - 14" swing. Use a template or original spindle for pattern. Max duplicating length 177/8", Max duplicating Diameter 7". 844256 .....................................................$219.99151007� replacement cutter ......................$20.99

Rob�Cosman�Angle�TrainerRob’s a big believ-er in sharpening plane blades free-hand because it’s efficient and fast. Free hand sharp-ening is acquired through practice, but Rob’s new Angle Trainer helps you develop the muscle memory more quickly. Think of the Angle Trainer as your sharpening “training wheels.” The Trainer helps you learn, by holding your plane blade at the proper angle for primary and secondary bevels as you move the blade over your stone. Before you know it, you’ll be able to take your training wheels off and sharpen just like Rob!150879 .......................................................$29.99

Rob�Cosman’s�Marking�GaugeReady to use out of the box, the Cosman Marking Gauge features an extremely sharp blade that will slice through, not crush, wood fibres for a clean, crisp line. Ideal for marking dovetails, tenons or just a cut line, the head has a hard rubber o-ring embedded inside to provide just the right amount of friction for making finite adjustments efficiently. A generous flat side on the brass head prevents the tool from rolling off the bench. 5” maximum marking length.846832 .....................................................$59.99151097 repl. cutter ..................................... $9.99

HUNTER�Carbide�Hollowing�ToolsTired of tough bowl blanks that quickly dull your edges? Have you hesitated to start on a burl because you know what the dirt in it will do to your tools? The Hunter Hollowing Tools, with their unique carbide cutters, are the solution to your prob-lems. They will cut just about everything that you throw at them. Easy to control and smooth cutting, these are great tools for beginners and welcome additions for advanced turners. Once the tip dulls, just loosen, rotate slightly to a new razor sharp section and continue turning. When it eventually wears out, the tip is easy to replace. No grinding or lapping of the cutter is needed, and the high quality carbide tip provides an edge life 25-30 times longer than other similar tools. Aluminum oxide finish on the tool holders prevents rust. Strong metal shanks minimize vibration and chatter. Complete with tip wrench and instructions. Available in 4 sizes to fit all your needs.

#3� Hunter� Tool is ideal for turning lidded boxes, goblets, and other small diameter work. Removes wood quickly, efficiently, and cleanly prior to sanding operations. 3/8" diameter cutter is mounted on a 43/4" long, 3/8" diameter shank; 193/4" overall tool length.

#4�Hunter�Tool is the first choice for turning me-dium sized bowls. Removes wood very quickly and produces outstanding finishes prior to sanding. This tool is also useful for rough turning and finishing turning. 1/2" diameter cutter is mounted on a 61/2" long, 1/2" diameter shank; 24" overall tool length.

#6�Hunter�Tool, A Woodcraft Exclusive! Designed to meet your most demanding turning needs and will amaze you with its ability to make heavy, yet smooth cuts. The huge 3/4" diameter tool shank provides vibration and chatter free cuts with the 1/2" diameter cutter. 81/2" tool shank; 26" overall tool length.

147946 (A) #3 tool ..................................... $74.99147949 #3 replacement carbide tip ........ $21.99147381� (B) #4 tool .....................................$99.99147382 #4 replacement carbide tip........ $21.99147947� (C) #6 tool ...................................$109.99147948 #6 replacement carbide tip .........$20.99

#5� Carbide� Hollowing� Tool�The #5 was designed with box makers and turners in mind, who like to work on smaller but deep vessels. The Hunter #5 features a 5/8" shank tapering down to a 3/8" cutter so you can extend over the rest without vibration and chatter for smoothing out those deep boxes and vessels. 81/4" shank, 25" overall tool length.149357 (D) #5 tool..................................$119.99

C

B

A

DA

HUNTER�#3�Swan’s�Neck�Hollowing�ToolsThese swan’s neck style tools feature the unique round carbide cutters which will cut just about everything that you throw at them. Easy to control and smooth cut-ting the swan’s neck profile helps you reach those areas in a narrow opening vessel which are difficult or impossible to cut with a straight shafted tool. Once the tip dulls, just loosen, rotate slightly to a new razor sharp section and continue turning, and the tip is easy to replace. No grinding or lapping of the cutter is needed, and the high quality carbide tip provides an edge life 25-30 times longer than other similar tools. An aluminum oxide finish on the tool shank prevents rust. Complete with tip wrench and instructions. Available in two bends.148762 (A) shallow swan’s neck ............ $114.99148761 (B) full swan’s neck ................... $109.99148763 replacement tip screw ................... $4.99

B

CROWN�PRO-PM�Turning�ToolsCrown has succeed-ed in developing tools that provide all the benefits of powdered metal, but at a reasonable price. These super grade, harder and tougher, steel tools retain an edge longer with less sharp-ening, European ash handles. Honing required before use.141989* 3/8" spindle gouge..$43.99141344 1/2" spindle gouge $50.99141988 1/4" bowl gouge.... .$61.99141346* 3/8" bowl gouge .. ...$71.99141345 1/2" bowl gouge.....$94.99143750*�3/4" roughing gouge ........... ............................ ...$91.99142750 3/4" square nose scraper .............................. $58.99142751 3/4" round nose scraper .... .............................. $56.99142752* 3/4" skew............. .. $64.99149351�� 3/4" rolled edge .................. radius skew. ......... $88.99142753* 1/4" diamond parting tool ............................ ...$74.99149108 3/8" detail gouge ...$74.99149109 1" bowl gouge ........................... $144.99149110 1/2" detail gouge. ..........................$71.99149111 1/4" spindle gouge .......................$46.99149112 1/2" skew gouge ...........................$50.99149113 1" square nose scraper ...............$94.99149114 1" round nose scraper ................$94.99149115 1" skew chisel ..............................$96.99

Crown�Pro-PM�Boxed�Set�of�5 includes (*) above. 143752 Set of 5 Save Over $42! ..........$299.99

SkewchigougeDesigned by English turner Allan

Beecham. This tool will work as a skew chisel and gouge, thus the name Skewchigouge. With equal ease you can cut beads, pummels, balls, birds beaks, plane v-grooves, and more. Virtually catch proof, this amazing tool has become one of our favorites for any spindle work. Don’t let its odd looks fool you, this tool is one you’ll find more uses for every time you try it. 71/2" blade, 17" overall with stained beech handle. Honing required before use.140474� ....................................................... $37.99

Cuts beads, pummels, balls, birds beaks,

v grooves, and more!

WoodRiver®�Super�Long�Bowl�ScraperThis is the longest and thickest finishing scraper avail-able. This massive tool has a 141/2" blade machined from 3/4" x 1/2" HSS bar stock, with tip ground in the round side scraper pattern. This tool’s heft reduces

vibration and allows greater tool rest overhang. It’s exceptional for working extra deep urns, vases, or voluminous small mouth bowls. 111/2" handle. Honing required before use.12W41 .................................................... $104.99

Woodturning


PINNACLE®®�Cryogenic�Turning�Tools�Manufactured in Sheffield exclusively for Woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools, with-out the cost of powdered metal tools. Cryogenically treatment uses sub-zero temperatures, down to -300°F, to modify the micro-structure of the steel into a more uniform grain structure that allows you to hone to a fine edge that is more durable and more resistant to wear. Cryogenically treated Tools stay sharp two to three times longer than standard M-2 High Speed Steel tools so you turn more and sharpen less! Each tool is mounted in a European ash wood handle. Overall tool lengths range from 17" to 23". 149350� 1/4" spindle gouge ........................$39.99�148785 3/8" spindle gouge ........................ $41.99148784 1/2" spindle gouge ........................$50.99149347� 1/4" bowl gouge .............................$55.99�148782� 3/8" fingernail bowl gouge ............ $67.50148781 1/2" fingernail bowl gouge ............ $81.99148783� 3/4" roughing gouge .......................$77.50151210�� 11/4" roughing gouge ....................$84.99151211�� 13/4" roughing gouge ..................$139.99149349� 1/2" round nose scraper ...............$46.99�149348� 3/4" side cut scraper .....................$62.99�148786� 1" square nose scraper�............... $56.99148787�� 1" round nose scraper .................$54.99151212�� 1" oval skew chisel .....................$139.99148788� 3/4" skew chisel ............................$50.50148789� 3/16" diamond parting tool ........... $61.99149346� bowl finish scraper ....................... $91.99�151330�� pepper mill tool ............................$49.99

Spindle� Turning� Set� contains 3/8" spindle gouge, 3/4" roughing gouge, and 3/16" diamond parting tool.149020 save $24 over individual tools ..$154.97

Bowl�Turning�Set contains 3/8" fingernail bowl gouge, 1" round nose scraper, and 3/16" diamond parting tool.149021 save $21 over individual tools ..$159.97

Turner’s�Set�of�5�Tools�contains the tools necessary for most projects. Includes 3/8" spindle gouge, 3/8" fingernail bowl gouge, 3/4" roughing gouge, 3/4" skew chisel, and 3/16" diamond parting tool.149022 save $27 over individual tools.. $264.99

PINNACLE®®�Cryogenic�Pen�Turner’s�SetThe perfect set for turning small projects. Appro-priately sized (approximately 9" long), so you won’t get worn out trying to finesse a small turning with standard size tools. Plus, the cryogenically treated steel blades will hold an edge two to 3 times longer than standard M2 tools. This means you can turn pen blanks from the toughest plastics to the hard-est woods. The three piece set contains a 1/4" bowl gouge, a 1/2" oval skew chisel and a 1/8" parting tool.149546 .....................................................$109.99

PINNACLE®®®�Cryogenic�5-Piece�Miniature�SetThis Pinnacle® turning boxed tool set features cryogenically treated steel for exceptional edge retention lasting two to 3 times longer than standard M2 steel. The set is perfect for crafting those smaller delicate turnings and includes: 1/8" gouge, 1/4" gouge, 1/16" parting tool, 1/4" skew chisel and a 1/4" round nose scraper. Each tool measures approximately 10-1/4 ®" long with a 6-1/4" handle. 149547 .....................................................$109.99

Modular System Saves You Money!

PINNACLE®�Lathe�Tool�Rest�SystemTired of using a tool rest that’s too short, too soft and designed by an engineer that has no idea what it’s like to even use a lathe? If you’d like to spend more time turning instead of tuning, the Woodcraft Lathe Tool Rest System is for you. Our straight “L” shaped rest improves tool control by allowing interference-free hand movement over the full length of the rest. The top of the rest features a hardened 1/4" steel rod, which will remain nick-free, even after hours of use. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration-free scraping. Use the small bowl rest for bowls up to 7" in diameter and the large for up to approximately 14". The “S” bowl rest is 14" long with a 5" dia. bend on one end and an 8" dia bend on the other. Woodcraft tool rests are modular in design, to save you money (buy 2 rests and 1 post), and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Posts screw into rests and can easily be removed and attached to a different accessory.123580 (A) 4" straight tool rest ................$28.99123581 6" straight tool rest .....................$35.99123582 12" straight tool rest ...................$49.99140456 (B) small bowl rest ......................$19.99140457 (C) large bowl rest .......................$29.99145950 (D) “S” bowl rest ..........................$38.99123585 5/8" dia. post, 3.5" long ...............$13.99124186 3/4" dia. post, 3.5" long ...............$13.99123584 7/8" dia. post, 3.5" long ................$13.99141931 1" dia. post, 3.5" long .................$13.99123583 (E) 1" dia. post, 5" long ...............$14.99

E

A

C

D

B

BEALL�Wood�Buff�SystemGive your next small project a spectacular finish quickly and easily with this set of three 8" diameter buffs, compounds, and a quick-change adapter. Whether you’re polishing an oil finish on a box, buffing the scratches out of a turned bowl or plat-ter, or finishing pen blanks, this system will leave a glass smooth surface on whatever you hold to it. The secret to the system is the dozens of soft cloth layers apply compound evenly without rounding over sharp features and edges. The wheel actually splays out slightly to conform to the shape being buffed. The all-flannel tripoli buff will level out the finish and remove any scratches. The flannel/cotton mix white diamond buff takes out any remaining small scratches and begins to polish. The all-cotton carnauba wax buff yields a high gloss polish, similar to a lacquer finish. Changing buffs takes seconds with the quick-change adapter; it adjusts to fit 1/2" or 5/8" motor arbor shafts (1/2 HP or larger, 1725 RPM motor recommended). The optional #2 Morse Taper mandrel enables you to use the buffs on the lathe (you’ll have to make a 1/4"-20 drawbar to hold it in place). The compounds will last for years when used moderately. Complete instructions included. Not for use in a hand-held drill. System includes 3 buffs, quick-change adapter and 3 compounds.141069 wood buff system .........................$69.99141070 #2 MT mandrel ............................ $11.99141073 tripoli bar (6" x 2" x 1") ................... $5.99141072 white diamond bar (6" x 2" x 1") .... $5.99141071 carnauba bar (51/2" x 2" x 5/8") ...... $6.50150888 #1 MT adapter ............................. $11.99827106 mandrel adapter ..........................$16.99845962 mandrel extension .......................$15.99

BEALL�3-On�Lathe�Buffing�MandrelLets you run the three buffs at one time! One end of the 18" mandrel (requires 18" between centers) is machined to a #2 Morse Taper to fit in the head stock of your lathe, the other end is machined to accept the tail stock. Now you can quickly and efficiently take small items through three steps of buffing without stopping to change buffs. Kit contains the mandrel with spacers, three buffs, tripoli, white diamond compounds and carnauba wax.823903 .......................................................$89.99

Woodturning


WoodRiver®5-Piece�“Mini”HSS�TurningTool�SetThis HSS set is a great addition to any turners tool kit for smaller turn-ing projects. Set includes 1/8" and 1/4" spindle goug-es, 1/8" parting tool, 1/4" round nose scraper, and 1/4" skew chisel. Tools are approx. 10" long, complete with wooden case. Honing required before use.143718�� .....................................................$43.99

WoodRiver®®Turning�ToolsThese high quality turning tools are designed to meet the needs of any skill level turner, from beginner to demanding professional. The high speed steel blades are hardened to Rc 62-64 and set in extra long 16" hardwood handles with brass ferrules. The extra length of the handles allows greater control and comfort for those long turning sessions. The HSS blades stay sharp up to six times longer than carbon steel. Available exclusively at Woodcraft, these tools represent great value and quality. Honing required before use.

145903� 1/4" spindle gouge .............. $20.99145904 3/8" spindle gouge .............. $25.99145905 1/2" spindle gouge .............. $31.99145906 5/8" roughing gouge ............ $41.99146225 3/4" roughing gouge ............ $44.99145910� 1/8" fingernail bowl gouge .. $31.99145911 1/4" fingernail bowl gouge .. $36.99145912 3/8" fingernail bowl gouge ...$41.99150492 1/2" fingernail bowl gouge .. $45.99146174 1/2" bowl gouge ................... $49.99146231 1/2" oval skew.......................$31.99146232 3/4" oval skew ..................... $38.99

Turning�Tool�Sets feature the same high quality HSS blades as the individual tools. 63/4" blades are set in 16" hardwood handles with brass ferrules. Honing required before use.

Beginner’s�Turning�Set contains 3/8" spindle gouge, 3/4" roughing gouge, 1/2" oval skew chisel, 1/2" round nose scraper, and 1/4" bowl gouge.145913 .............................................................................................................................................$136.99

Turner’s�Set�of�8�contains all the tools necessary for most turning projects. Set contains 1/4" spindle gouge, 1/2" spindle gouge, 3/4" roughing gouge, 1" oval skew chisel, 1" square nose scraper, 1" round nose scraper, 3/16" diamond parting tool, and 3/8" bowl gouge.145914 ...........................................................................................................................................$229.99

Extra�Length�Handles

145907 1" oval skew chisel ................................. $41.99�146229 1/2" round nose scraper ......................... $32.99146230 3/4" round nose scraper ......................... $38.99146226 3/4" curved scraper ................................. $36.99145908 1" square nose scraper ......................... $43.99146224 1" hook nose scraper ............................. $43.99146227 11/2" left cut, H.D. bowl scraper ............ $86.99146233 1/8" diamond parting .............................. $32.99145909� 3/16" diamond parting tool ..................... $36.99146228 3/8" beading/parting ............................... $33.99146222 1/4" captive ring tool ............................... $29.99146223 3/8" captive ring tool ............................... $32.99

WoodRiver®

Turner’s�Sanding�PackThis convenient dispenser is loaded with five 1" x 20' rolls of cloth- backed aluminum oxide abrasive. Perfect for spindle, pen, or any turning where small strips of abrasive are needed. Each dispenser pack contains rolls of 150, 240, 320, 400, and 600 grit abrasives. Just pull out the length of abrasive strip you need and tear it off on the metal cutting strip on the edge of the dispenser.148558� sanding pack ...............................$19.99148559� repl. roll 150 grit ............................ $4.99148560� repl. roll 240 grit ............................ $4.99148561� repl. roll 320 grit ............................ $4.99148562� repl. roll 400 grit ............................ $4.99148563� repl. roll 600 grit ............................ $4.99

Kel�McNaughtonSystemTurn wasted wood in to an-other valuable turning! This tool won’t put the shavings back together again, it just avoids cre-ating them in the first place! Using the McNaughton System you’re able to make several bowls from one blank (green or dry) by actually removing bowl blanks from the center of the main blank with each bowl you turn. Not only do you save money, but you also save time since the resulting blank is already roughed out

into a bowl shape. The Standard System contains three curved D2 HSS blades for cutting bowls with diameters from 4" to 14", one straight blade for basic coring, a handle, and special 1" diameter tool post. This tool post is specially designed to not only guide the curved tools through the blank, but it also holds the tool in the proper upright position and protects against dangerous catches. The Large System contains three larger, thicker blades for releasing bowl centers up to 18" diameter, a handle, and special tool post. Besides turning wider bowls, the Large System is also capable of turning out deeper blanks. The Complete System contains all 7 blades, both handles, and one special tool post. If you turn expensive or rare woods, the savings you’ll gain in both material and rough-out time from only a few “nests” of bowl blanks make this a must have tool.127676 (A) standard system .................. $309.99127677 (B) large system ......................... $334.99127678 complete system ....................... $449.99

B

A

Steel�Center�FInderThis Steel Cen-ter Finder accu-rately locates the center of round or square stock up to 6" in diameter. If you are like us and break sev-eral of the plastic centering squares each year, here is the answer. This quality, heavy steel machinist’s center square will last a lifetime.143559 ......................................................$22.99�

Zero�Zero�Center�FinderQuickly, easily, and accu-rately determines center for round or square stock up to 8" in diameter and hexagons up to 53/4" in diameter. Place the plastic center finder over the end of the piece, scribe a line, rotate the center finder about 90° and scribe a second line. The intersecting lines define the workpiece center!02J14 ......................................................... $8.99

�


Woodturning


SORBY�“Midi”�Turning�ToolsFinally, mid-sized tools f o r m i d -sized work. Lathe tools traditionally have come in two sizes, full size and m i n i a t u r e . Full-size tool handles and blade lengths are inconvenient when working on medium to small projects, and mini tool blades and handles are just too small for anything but miniature work. With an overall length of 13" and a blade length of around 4", this new line from Sorby gives you just the right amount of blade and handles that are large enough to grip, yet are small enough to make them easily maneuverable. The perfect sized tools for midi and mini lathes.141970 1/4" bowl gouge ............................ $41.50141971 1/4" spindle gouge ....................... $41.50141972 1/2" spindle gouge ....................... $41.50141973 1/16" fluted parting tool ................ $42.50141974 1/2" skew chisel ............................ $42.50141975 1/2" curved scraper ...................... $42.50

SORBYExtra�Heavy-Duty�ScrapersA Woodcraft Exclusive, these scrapers are a full 1/2" thick t o h e l p eliminate chatter. Un-like most heavy-duty scrapers, which are too wide to make tight radius turns or to be used in narrow turnings, these scrap-ers are sized to work in most turning situations. All feature 7" long blades and 14" Ash handles.145700 1" square nose .............................$79.99145701�� 1" bowl ..........................................$79.99145702 1" round nose ...............................$83.99145703� 1/2" round nose .............................$64.99145704� 1/2" square nose ...........................$64.99

SORBY�Beading�ToolsYou don’t have to be an expert to turn perfect beads. This specially ground set of High Speed Steel scrap-ers will shape beads from 1/8" to 3/8" with absolute consistency each time you use them. Their design enables the forming of a single bead, or a line of beads for really ornate projects. For spindle and bowl work they will add the finest touch of decora-tion to your creations. 61/2" ash handles, blade lengths 41/2".14Y53 1/8" .................................................$36.9914Y54 3/16" ................................................$36.9914Y55 1/4" .................................................$42.9914Y56 5/16" ................................................$42.9914Y57 3/8" .................................................$42.9906O86 set of 5 Save Over $27! .......... $174.99

� 1/8"� 3/16"� 1/4"� 5/16"� 3/8"Actual�Size

SORBY�Box�&�Bowl�ScrapersThese new shapes are the perfect width for smaller bowls and boxes, yet still thick enough to handle serious turning without chatter. Both are 3/4" wide, 16" long, with 10" ash handles.

Roundnose� Scraper. A curved end profile makes this tool ex-cellent for creating, smoothing, or blending curved surfaces on bowls, spindles or round bottom box work. Heavy enough for aggressive shaping, yet small enough for sensitive refining cuts.126954�� (A) ...............................................�$58.50

Side-Cut�Scraper. The cutting profile of this scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radiused point at the bottom corner of the scraper creates a smooth transition from a side wall to a flat bottom.126955�� (B) ............................................... �$61.50

Heavy-Duty� Bowl� Scrapers. First introduced by master craftsman Richard Raffan, these shapes have been found to be most efficient in producing the final surfaces on bowls. The curved tips with elongated side edges can clean up rough, irregular cuts left by gouges, and cut a more pleasing curved shape too. Available in curved left and curved right styles. Blades are 7" long x 11/2" wide x 3/8" thick with 14" ash handles. 06O92 (C) left scraper ............................$109.9906O93 (D) right scraper ..........................$109.99

AB

CD

SORBY�HSS�Turning�Tool�SetIncludes the 8 basic tools you’ll need for spindle and bowl turning. These HSS tools will keep a sharpened edge about six times longer than carbon steel, and resist “blued” softening from overheat-ing during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure. Overall lengths 17" to 21". 14J41* 1/4" spindle gouge .......................$40.9906O14* 1/4" parting tool............................$50.9906O31* 3/8" bowl gouge............................$79.9906O21* 1/2" spindle gouge ....................... $61.5006O34**�1/2" round nose ............................ $51.2906O11* 3/4" roughing gouge .....................$66.5006O24* 3/4" skew ......................................$59.9906O41 1" square nose ............................$69.9911L40 set of 8 Save Over $31! ........ $449.99

Beginner’s�Turning�Set will get you started right! Contains the 5 basic spindle turning tools indicated by (*) above. Superior tools that will form the heart of any turning tool collection.06O30 set of 5 Save Over $34! ......... $229.99

Intermediate� Turning� Set is designed for both spindle and bowl work. Contains the 6 tools indicated by (*) above and below.146162 set of 6 Save Over $28! ........ $324.99

Additional�Styles provide extra versatility for bowl and spindle work. Ash handles.14P41* 1/8" parting tool ............................. $47.9906O81 3/16" diamond parting..................$66.99�06O51 1/4" bowl gouge ............................ $67.9906O61* 3/8" spindle gouge .......................$50.9906O54 1/2" bowl gouge ............................$99.9914O52 1/2" oval skew ............................. $51.9906O64 3/4" spindle gouge .......................$84.9906O71* 3/4" oval skew ............................ $56.5006O74 1" oval skew ...............................$59.9906O44 11/4" roughing gouge.................$102.9914O62 11/4" oval skew ............................$71.5014P42 3/8" beading & parting ................$58.29

SORBY�Fingernail�Profile�GougesThe “fingernail” grind has been a popular edge with woodturners because it is easy to use and

control, plus it’s extremely versa-ti le.These new fingernail gouges feature an easy to use, medium grind, with wing tips that have been ground back so the tool does not “catch” on the work piece. With these tools, pull and push cuts, delicate shearing cuts, or even full profile cuts can be made with ease. An added advantage of the medium grind is that it lends itself to easy modification, allowing you to create profiles specifically suited to your turning requirements. Overall length 161/2". 126941 (A) 3/8" spindle gouge, shown .....$43.99126942 (A) 1/2" spindle gouge ..................$56.29126943 (B) 3/8" bowl gouge, shown ......... $74.99126944 (B) 1/2" bowl gouge ......................$89.99

HSS�Parting�ToolsAre ground with a unique hol-low ground edge that forms a pair of cutting spurs on each side of bevel edge. These spurs score cross grain fibers and shear end grain leaving a smooth surface. Blades are 61/2" long, handle length 111/2". 14W51 (A) 3/16" thick blade ...................... $89.99�124054� (B) 1/16" thick blade ..................... $61.99

BedanA large 3/8" parting and bead-ing tool with unique, ground tapered sides and a top cut-ting edge. Great for parting into faceplate work.06O12 ...............$54.99

A

B

A B

Woodturning


SORBY�Sovereign�SystemThe Sovereign turning system from noted turning tool manufacture Robert Sorby, offers a delicate combination of comfort and balance just where you need it. Beautifully engineered, this versatile tool system not only looks good, it feels great, and the interchangeable tool handles are available in 16 and 22 inch lengths. The handles are made of aluminum alloy to give you the best of strength, balance and vibration dampening qualities and each handle is equipped with a durable Softex grip for extra comfort and control. Both handles will accept turning tools with a 5/8" diameter shaft, but 3/8" and 1/2" collets are also included so that you can adapt the handle to a variety of tools. The Sovereign System offers several options to aid in your turning projects. The addition of a side handle for added control, or if extra weight is needed you can add a counterweight to the end of the handle. Unscrew the end cap and attach the counterweight to the end cap and reattach. If a longer handle is needed use the optional coupler to attach two of the handles together providing a handle up to 44" in length.

150107� (A) 16" handle ..............................$83.99150108 (B) 22" handle ..............................$94.99150109 counterweight .............................. $17.99150110 side handle ................................. $21.99150111 (C) bowl gouge 1/4" .......................$29.99150112 (D) fingernail bowl gouge 1/4" ......$29.99150113 (E) bowl gouge 3/8" .......................$40.99150114 (F) fingernail bowl gouge 3/8" ......$40.99150115 (G) bowl gouge 1/2" ......................$53.99150116 (H) fingernail bowl gouge 1/2" ......$53.99150117 (I) bowl gouge 3/4" ........................$71.99150118 (J) extra long bowl gouge 1/2" ......$69.99150119 (K) extra long bowl gouge 3/4" .....$89.99150120 (L) spindle gouge 3/8" ................. $21.99150121 (M) fingernail spindle gouge 3/8" $21.99150122 (N) spindle gouge 1/2" ..................$28.99150123 (O) fingernail spindle gouge 1/2" $28.99150124 (P) multi tip hollowing tool ..........$63.99150125 (Q) hollow master ........................$53.99150636 coupler .........................................$15.99

A

B

C D E F G H I J K L M N OP Q

SORBY�Hollow�MastersFeatures a flat bottom for increased stability and control. The 1/4" wide HSS cutter can be swiveled to allow the cutter to reach otherwise inaccessible areas inside hollow forms. The included 1" round scraper cutter can be mounted in place of the hol-lowing cutter for final inside smoothing. Full-sized model is 24" long with an 8" reach, mid-sized is 181/2" with a 6" reach.820045� full-sized ....................................... $83.99831862� mid-sized .......................................$73.99

Termite�Hollowing�ToolUsing a unique beveled, circular cutting tip, this revo-lutionary tool makes fast, deep, controlled hollowing cuts in end grain quickly and easily. You no longer have to be an expert woodturner to safely perform difficult end grain cuts in hollowing operations. Machined from HSS, the Termite ring tip produces a clean shearing cut, which means you spend less time sanding and finishing and more time turning! The tool comes with 2 interchangeable ring tips, a #1 (5/16" dia.) and a #2 (7/16" dia.). A larger #3 (9/16" dia.) ring tip is available as an accessory. Overall length

is 231/2". Cutters can be quickly reground to original factory sharpness using the supplied grinding point and grinding jig block. Kit includes tool shank, #1 and #2 cutting tips, grinding jig, stone, and instructions.124354� complete kit ..................................$99.99124355 replacement #1 tip ......................$24.99124356 replacement #2 tip ......................$28.99124357 replacement #3 tip ...................... $27.99127129 repl. grinding point ..........................$7.99

WoodRiver®®Spindle�Steady�RestUsed to prevent whip and vibration in long or thin spindles while turning, this heavy cast iron Steady Rest features three ad-justable ball bearing guides with a maxi-mum capacity of 3". The Steady comes with two spacer blocks which allow it to be used on lathes with 12", 14", or 16" swings.145095 .......................................................$42.99

Angelfire™ Women’s�TurnersJacketUltimate protection is a must from flying debris, shav-ings, and even stains while turning. Angelfire Women’s Turners Jacket was designed to provide comfort and full protection of the upper body. Adjustable cuffs and a weld-er’s collar will help prevent debris from going down your back or up the sleeves of your shirt. Constructed from brushed 9 oz. cotton these jackets feature dual scribe pockets on the sleeves along with dual interior pockets one of which is zippered. 151055 chocolate, medium ......................$34.99151056� chocolate, large ............................$34.99151057� chocolate, x-large .........................$34.99

BSX�Woodturning�Jacket�Ultimate protection is a must from flying debris, shavings, and even stains while turning. BSX Woodturning Jackets were designed to provide comfort and full protection of the upper body. Adjustable cuffs and a welder’s collar will help prevent debris from going down your back or up the sleeves of your shirt. Made of 9 oz. cotton these jackets feature a scribe pocket on the left sleeve along with a pocket on the right side interior.151052 khaki, large ...................................$29.99151053 khaki, x-large ................................$29.99151054 khaki, 2x-large ..............................$34.99

SORBY�Chatter�Tool/ScraperThis multi-functional turning tool, can be used as a shear scraper or a decorative, “chatter” tool. When used as a chatter tool it creates decorative textures as the flexible blade vibrates, or chatters, when touched to the turning stock. This fast bouncing action causes the blade to make small, rhythmic cuts until a pattern has been formed. Textures can be changed depending on the speed of the lathe, wood density or the pressure of the tool against the work piece. Chatter work can be applied to end-grain only. Kit comes with chatter tool, square and point cutter, domed and hollow cutter, shear scraper cutter and Allen wrench. Tool measures 13" overall length.06O65� chatter tool/scraper kit ..................$86.9906O96� repl. square & point cutter .............. $5.9906O98� repl. domed & hollow cutter ............ $5.99829953 repl. shear scraper cutter ........... $11.99

www.woodcraft.com

Woodturning


A B C

D

ci1,�ci2 ci0,�ci3 ci4

R2

R4

EASY�WOOD�ToolsThe beauty of these revolutionary turning tools is the uniquely designed carbide cutters. Say goodbye to sharpening, as these cutters add up to 20 hours of additional turning time over conventional tools, once dulled, simply change it. Secondly, the cutter’s designed so that you don’t have to “find the bevel” when turning. Simply advance the tool slowly into the work piece and begin cutting straight in, or sweep the cutter from left to right, or right to left. The Ci1�Easy�Rougher hogs material off effortlessly by transferring cutting pressure directly to the tool rest and comes standard with an R4, 4" radiused square cutter, for roughing larger pieces. Options include an R2, 2" radiused square cutter, used for finishing inside bowls under 8" in diameter and a square head cutter for roughing and creating square inside corners. The Ci0�&�Ci3�Finisher features a round carbide cutter for inside work on smaller bowls, or for cutting coves on spindle work. The Ci4�Easy�Detailer is paired with a diamond shaped cutter that can be used as a parting tool, as well as creating beads, coves, v-grooves, or a dovetail for chucking bowls. The David�J.�Marks�Ci1�Rougher is a limited edition, with a laser engraved signature endorsement from David Marks that is paired with a 20" Bubinga handle (overall length 281/2"). There is no substitute for proper eye protection, so we recom-mend the Lexan® chip deflector which attaches to the shaft of the tool and helps deflect the massive amounts of material these tools remove.Full�Size:�1/2" x 81/2" Tool, Overall Length 231/2"149926 (A) ci1 easy rougher ..................$126.99149927 (B) ci0 easy finisher ...................$142.99151020 (C) ci4 easy detailer ..................$139.99

149929 (D) ci1 easy rougher, ............................... David J. Marks limited edition ..$145.99149930 ci1 repl. square cutter w/screw $13.99149931 ci1 repl.R2 cutter w/screw ......... $13.99149932 ci1 repl. R4 cutter w/screw ........ $13.99149947 ci0 repl. round cutter w/screw ... $18.99150887 ci4 repl. diamond shaped cutter ........... w/screw ....................................... $18.99149948 (G) chip deflector for 1/2" bar ......$26.50

Mid-Size:�3/8" x 7" Tool, Overall Length 23"149928 (E) ci2 mid-size rougher ............ $119.99151018 ci3 mid-size finisher .................. $119.99151019 ci4 mid-size detailer .................. $119.99149933 ci2 repl. square cutter w/screw $14.99151021 ci2 repl. R2 cutter w/screw ........ $14.99845747 ci3 repl. round cutter w/screw ... $16.99150887 ci4 repl. diamond shaped cutter ........... w/screw ....................................... $18.99151022 (G) chip deflector for 3/8" bar ......$24.99

Mini-Size:�3/8" x 4" Tool, Overall Length 151/2"845506 ci2 mini rougher ...........................$91.99845746 (F) ci3 mini finisher.......................$91.99150886 ci4 mini detailer ...........................$91.99149933 ci2 repl. square cutter w/screw $14.99151021 ci2 repl. R2 cutter w/screw ........ $14.99845747 ci3 repl. round cutter w/screw ... $16.99150887 ci4 repl. diamond shaped cutter ........... w/screw ........................................$18.99151022 (G) chip deflector for 3/8" bar .......$24.99

C

F

E

G

Lexan®

A B

FEasy�Wood�ToolsAluminum�Face�PlatesEasy Wood anodized aluminum faceplates are precision machined to meet the needs of the most demanding wood turner. Faceplates are drilled with eight screw holes for secure mounting, along with a 5/16" diameter hole for breaking the faceplate free. Aluminum faceplates are an excellent choice for green wood turning since they will not transfer stains or rust and because they are softer than steel they reduce the amount of tool damage from accidental

contact. Available in three diameters, 1" x 8 tpi and three diameters, 11/4" x 8 tpi.151012 (A) 2" dia., 1" x 8 tpi ......................$20.99151013 (B) 3" dia., 1" x 8 tpi .....................$25.99151014 (C) 4" dia., 1" x 8 tpi .....................$30.99151015 (D) 21/2" dia., 11/4" x 8 tpi ............ $24.99151016 (E) 31/2" dia., 11/4" x 8 tpi............. $27.99151017 (F) 41/2" dia., 11/44" x 8 tpi ...........$33.99

D E

C

Double-Face�Turning�TapeThis super-strong, double-sided adhesive tape is the quickest way to secure bowl blanks, and other pieces under 10" diameter on faceplates. All stock must be dry and milled flat for bonding. Oil-resistant, cloth-backed tape is available in two widths.15D25 1" x 36 yds. ..................................$20.9915D26 2" x 36 yds. ..................................$42.50

PINNACLE®Turner’s�Leather�Apron�You need a l l the protection you can get from shavings, stains, and flying debris while turning. Our leather turner’s apron provides great protection without restricting arm move-ment. Durable, yet soft and comfortable to wear, it’s made from full-grain cowhide seg-ments stitched with heavy-duty thread. Weighs just over a pound. The collar uses hook & loop style fasteners and can be removed from the apron. Straps crisscross over your back and are easy to adjust for a fit that’s just right for you. Apron is 21"W x 41"L. Features two pencil pouches outside and two “shaving-free” pockets inside.149419 .....................................................$99.99

Easy�Wood�ToolsCi3�Easy�Hollower�#5�The Ci3 Easy Hollower #5, used to hollow vessels up to 5" in diameter, incor-porates all of the same Easy Wood Tool technology and benefits that you’ve grown to love. Using the same cutter as the Ci3 Mid-size and Mini-size there is no need to ever sharpen this tool; once dulled simply replace the cutter. Incorporating a 1" wide platform into the tool combined with the use of a “Super Wide” flat tool bar allows a natural presentation of the cutter, at the perfect cutting angle. This makes the normally tedious or difficult to make “blind cut” on inside of a hollow form something that even a novice can perform. Blade width 1", blade length 91/2", handle length 16”, overall length 251/2".151267 .....................................................$149.99

GALBERT�Turner’s�CaliperThe Galbert Cali -p e r s a f e l y p r o -vides a constant, accurate reading of the diameter of the work piece while you're actually turn-ing the workpiece. Gone are the days of setting multiple pairs of calipers to varying diameters, since this “Turner’s Tape Measure” allows you to see real time measurements as you turn. The Galbert Caliper provides a reading range from 23/4" down to 1/2" when working on 23/4" or less material.151266 .......................................................$79.99

Woodturning


WoodRiver®®�Turner’s�Collet�ChuckCollet chucks are preferred by woodturners for holding small pieces for turning because the collets grip tight enough to easily hold your work, but with little or no marring. Our chuck is built to machinist tolerances and uses interchangeable collets to grip round tenons. The collets, which work just like the chuck in your router, grip with even pressure completely around the tenon on your workpiece. Includes eight collets which range from 1/8" to 3/8" and 1/2" to 5/8" by 16ths, collet chuck with #2 Morse taper and chuck wrench in a fitted case.146110� .......................................................$85.99

Value-Priced�Live�Tail�CentersThese value-priced centers have removable centers: #1 Morse Taper comes with a point and a cup with point; #2 comes with a cup with a removable point. Both feature smooth ball bearings for long life.141059 (A) #1 MT value center ...............$15.99141060 (B) #2 MT value center ...............$15.99

A B

BEALL�Spindle�TapsNow you can make all the glue face plates and jam chucks you want without ever hav-ing to mount blocks on your metal face-plates again! These taps are machined in lathe spindle sizes so that after you have drilled and tapped a wooded block, you simply mount the block directly onto your lathe. The tapped block can then be put to use in a special faceplate, vacuum fixture or other mounting assembly. Instructions included.147816 1" x 8 TPI .......................................$17.99147817 11/4" x 8 TPI ..................................$26.99

BA

Woodturner’s�Calipers�are indispensable for measuring diameters and wall thicknesses of large bowls during turning. The special double end design transfers a measurement from one tip to the other tip, so thicknesses can be figured without remov-ing the caliper from the work in progress. Made of nickel plated steel with a brass wing nut and screw.

(A)�Inside-Outside�Calipers, 6" from pivot to tips.09N22� ...................................................... $28.50

(B)�Double-Ended�Calipers, 7" from pivot to tips.09N21 ....................................................... $33.9909N20 set of 2 (A&B) Save $6! ........... $56.25

(C)�Hollow�Vessel�Calipers.�Similar in function to the calipers above, but with a unique shape that allows you to measure wall thickness in hard to reach areas, especially when working on narrow opening vessels. Large is 10" from pivot to point, small is 5".142733 small caliper ................................$22.99142732 large caliper ............................... $35.99

C

GRÖZ��8"�Caliper�&�Divider�SetDesigned for reliable, accurate layout and measuring. Finely machined nuts run cleanly and quickly to secure legs exactly to dimension. Divider legs are precision ground to fine, hardened points for perfect layouts. 8" size is perfect for general bench and lathe work. Legs are finished with a durable black epoxy finish, all other parts are bright nickel plated. Three piece set is packaged in a durable storage wallet.141595 8" outside caliper ....................... $21.99141596 8" inside caliper .......................... $21.99141597 8" dividers ....................................$22.99148109 set of 3 Save Over $17! ............$49.49

Hold�Fast™ Vacuum�Chucking�System�More and more often turners are solving difficult workpiece holding problems by using vacuum chucking. Vacuum chucking is perfect for securely holding turnings without marring surfaces and fast chucking and removal of workpieces. When reversing bowls to turn of the base vacuum chucking provides unobstructed access to the entire surface so you can leave no holding marks and vacuum chucking makes holding natural edge bowls easy! The Hold Fast™ system along with a compressor is all you need to set up a vacuum chuck on any lathe with a hollow headstock spindle and #2 Morse Taper. The system is comprised of a dual venture vacuum generator which requires only 2.5 CFM between 55 and 65 PSI. The vacuum generator has a built in pressure regulator and vacuum gauge. The vacuum adapter passes through your hollow headstock to connect the vacuum generator to the vacuum chuck. The adapter’s sealed bearing greatly reduce the vacuum required compared to other brand adapters with “leaky” unsealed bearings. The adapter features an 18" plated threaded tube which you cut to fit your lathe headstock. The 3" Vacuum Chuck Head can hold convex or concave shaped workpieces. Made of glass filled nylon with an aluminum mounting adapter and comes with two O-ring seals to hold convex or concave pieces and anti lock spindle washer. This system includes everything you need to move up to vacuum chucking including an instructional DVD.149360 for 1" x 8tpi lathe spindles ...... $259.99 149361 for 11/4" x 8tpi lathe spindles ... $259.99149363� 3" vac. head only 1" x 8 TPI ....... $61.50149364� 3” vac. head only 11/4" x 8 TPI ... $61.50149365� 6" vac. head only 1" x 8 TPI ........$72.99149366 6" vac. head only 11/4" x 8 TPI ....$72.99149367� repl. seals (2) for 3" head .............. $4.99149368 repl. seals (2) for 6" head .............. $4.99

Hold�Fast™�Chuck�Reversing�Adapters feature #2MT on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck. Unscrew your chuck off the lathe headstock without removing your bowl, screw the revers-ing adapter into the chuck and install the bowl-chuck-adapter into your tailstock. By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly center your bowl on the vacuum head to finish turning perfectly centered!149369� reversing adapter for 1" x 8 TPI lathes ... ...................................................... $32.99149370� reversing adapter for 11/4" x 8 TPI lathes ..................................................... $32.99

Hold�Fast™�Vacuum�Adapter�Kit�contains all the parts necessary to pass vacuum through your headstock if you already have a vacuum pump. The kit features the same sealed bearings, 18" threaded tube as the complete system, and 4' of 3/16" ID vacuum hose. Provides an easy method of attaching a vacuum source to any wood lathe with a #2MT hollow headstock spindle. Can be used with any of the vacuum heads listed above or other user made fixtures held on a face plate.149362 .......................................................$59.99

Drill�Chucks�&�Live�Center(A)�Heavy-Duty�Ball�Bearing�Live�Center.�This indus-trial strength, 11/2 lb. live center features double 11/2" bearings for long life even under the heaviest loads. 60° cone for general work, #2 Morse taper.145077 .......................................................$59.39�

(B)� 1/2"� Keyed� Chucks. Inserted in the tailstock, these keyed chucks allow your lathe to work like a small horizontal drill press. Holds Forstner bits, spade bits or twist bits with shanks up to 1/2" for boring out lamps, boxes, vases, depth holes in bowl blanks and more. #1 or #2 Morse taper.142552� #1 MT (shown) ..............................$36.99142553� #2 MT ...........................................$36.99

(C)� WoodRiver®®� Keyless� Chuck. Inserted in the tailstock, a drill chuck allows your lathe to work like a small horizontal drill press. Use this drill chuck to hold forstner bits, brad-point bits or twist bits. A keyless chuck significantly reduces time to change bits. Black oxide finish with knurled barrel and collar for a sure-grip, includes JT33 to #2 Morse Taper adapter spindle for use in lathes with #2MT. Accepts bit shanks from 1/32" to 1/2". This JT33 keyless chuck can also be used on many drill presses.150785� #2 MT ...........................................$39.99

C

AB

Woodturning


ONEWAY�Stronghold�Chuck�KitNever again will you feel like you need three hands to tighten your workpiece in a woodturning chuck! Using a unique chuck and key system, the Stronghold allows you to hold your workpiece in one hand and tighten/loosen the chuck jaws with the other! In addition to one-handed key operation, this chuck offers the finest engineering and the most precise machining we have seen. With the capacity to hold a wide range of stock shapes and sizes, this 8-pound geared scroll chuck features a design developed by turning professionals and built to stand up under the most demanding turning operations. The heavy-duty 41/2" diameter body helps dampen rough stock turning vibrations while providing a powerful, secure grip. Other features like a nickel-plated scroll body, taper lock bushings for left or right hand use, and profiled “step” jaws for superior gripping of round or square stock all add up to make this the professionals choice. Stronghold kit includes: 1/2" x 11/2" RH jumbo wood worm screw; #2 jaw set (grips round stock from 13/4" to 3", square stock from 13/8" to 3", and expands into dovetail recesses from 21/2" to 4"), operating key, hex screws, T-handle hex wrench, removeable threaded adapter and instruction booklet. Canada.124360 3/4" x 16 TPI ............................... $299.99124361 5/8" plain .................................... $299.99124362 1" x 8 TPI ................................... $299.99

124363 11/4" x 8 TPI ............................... $299.99124364 11/2" x 8 TPI ............................... $299.99

Stronghold� Threaded� Adapters allow maximum versatility! Each Stronghold Chuck has a removable threaded adapter. By removing your existing adapter, and installing one with a different thread pattern, you can use your Stronghold Chuck on a different lathe!124343 3/4" x 16 TPI ...................................$32.99124344 5/8" plain ........................................$32.99124345 1" x 8 TPI .......................................$32.99124346 11/4" x 8 TPI ...................................$32.99124347 11/2" x 8 TPI ...................................$32.99

(A)�#1�Jaws�for�holding�small�work. Grips round or square stock from 1/2" to 2", expands in dovetail recesses from 11/8" to 25/8".124348 ......................................................$49.99

(B)�#3�Jaws for bowls, vessels and platters. Designed for strength, these jaws are built to handle “large”

turnings.Grips round or square stock from 31/2" to 51/2" in diameter, or expands into dovetail recesses from 41/2" to 6" in diameter.124350 ......................................................$54.99�

Jumbo�Jaws. Designed to re-chuck bowls and plates up to 12" in diameter for complete “bottom finish-ing”. The 8 rubber grippers cushion and hold your workpiece during light finish turning and sanding operations. (Not shown).124351 ....................................................$104.99813763 set of extra rubber grippers.........$26.99

A

CB

NOVA�Soft�JawsNow you will no longer have to match your proj-ect to a fixed dimension jaw set! Instead, you can quickly and easily design one of kind jaw sets to fit your special project needs. This new jaw set consists of 4 segments of high quality soft nylon which can be turned, sawn, drilled or tapped. The 1" thickness provides plenty of room to turn special profiles for holding pieces which would be difficult or impossible with standard jaws. Outside jaw dia. (closed) is 4.7". Fits all NOVA chucks.148043 ........................................................$17.99

Pro�Live�Center�SetThese high-quality live centers feature double bear-ing construction and precise machining for minimum vibration and long life. A rare earth magnet set into the body securely holds the interchangeable centers in place. Set includes 9/16" cup center, 5/8" to 1/4" tapered cup, 3/4" and extended 7/16" cone center, 1/2" cup center with point, and 1/2" cup center with removable 5/16" guide pin. Come complete with form-fitted case.142772 #1 MT pro set ..............................$66.50142771 #2 MT pro set ..............................$66.50

WoodRiver®®�Multi�ToothDrive�Centers�The multiple drive teeth and spring- loaded center point benefit both novice and experienced turners. The spring-loaded center point holds your workpiece exactly where you want it, then retracts as tail-stock pressure is increased. This keeps the point from drifting with the grain or splitting the workpiece. Because the center retracts, less pressure is needed to engage the teeth, especially helpful in hard woods where a traditional center would have to be driven in to engage the spurs. The Insert version is designed to be held in the jaws or most lathe chucks so you can switch back and forth between bowl and spindle work without removing your chuck.149173 1" dia. #2 MT ...............................$19.99149174 5/8" dia. #2 MT .............................$19.99149175 1" dia. chuck insert .....................$16.99

Deluxe�Drive�Centers�have sharp spurs for superior bite to help keep even difficult workpieces from tearing out and slipping. The center point is spring loaded so it holds the workpiece in position until the spurs engage, then retracts to prevent splitting your work as it is advanced into the spurs.149170� 1" dia. #2 MT ................$17.99149171 5/8" dia. #2 MT ..............$17.99149172� 5/8" dia. #1 MT ..............$17.99

WoodRiver®®60°�Cone�Live�Centers�These heavy-duty ball bearing centers can also be used for holding a workpiece with a hole from 1/8" to 11/8" diameter.149168 #2 MT .......................$19.99149169� #1 MT ........................$19.99

TEKNATOOL�SuperNova2

Woodturning�ChucksThe newest evolution of the classic Nova Chuck is finally available – the SuperNova 2! The nickel-plated body is made from high- grade K1045 steel machined to allow closer toler-ances. Its patented gearing system deliv-ers incredible gripping power and is over a third faster than the original SuperNova. With SuperNova2 gripping power you’ll be turning longer, more delicate stems. Large, rough and uneven work that you couldn’t handle before can now be turned with greater security. The Super-Nova2® requires only one hand to operate using a ball-nosed Allen key with a large easy-grip handle (included). It’s quick to tighten and requires much less effort. The ball nose allows the handle to operate at an angle while tightening the chuck. The SuperNova2® has a fully- sealed heavy-duty backing plate made from Duracon 25 composite which is reinforced with stranded glass fiber. Backing plate design incorporates a 24-division index for future indexing accessories. All of the original Nova Chuck accessories, jaws, and inserts are 100% compatible with the SuperNova2®! The unique and user-friendly features of this chuck prove it was designed by and for woodturners. Diameter of chuck is 37/8", depth is 33/8", weight is 51/2 lbs. Includes 50mm jaw set, T-bar, Allen wrenches, woodworm screw, and manual. Requires a threaded body insert to fit your lathe.145898 (A) ...............................................$189.99

Threaded� Body� Inserts compatible with Nova Chucks only:15M76 1" - 8 RH thread ...........................$23.99142434 1" - 8 R&L thread .........................$22.9915M78 3/4" - 16 RH thread .......................$22.9915M79 1" - 12 RH thread .........................$22.99126601 11/4" - 8 RH thread ......................$23.9915M80 5/8" plain .......................................$23.9915M81 7/8" - 14 RH thread .......................$22.9915M82 blank insert ..................................$21.99

(B)�Cole� Jaw�Set. These versatile jaws of sturdy 3/8" thick cast-aluminum with a 10" diameter have the same basic configuration as the smaller 50mm units and can expand into a 33/4"- 45/8" dovetailed recess, or clamp the outside of a turned dovetailed foot 35/16"-41/8" in diam. Space the 8 rubber stoppers in any of 8 diameter positions on the face of the plates to finish the bottom of a bowl up to 10" in diam. For larger bowls the stoppers may grip from the inside as the chuck expands outward.15M83�(B) ....................................................$79.9915M94 8 extra stops & screws ...................$10.99Mini�Cole�Jaw�Set Same as the Standard set, but sized for mini-lathes. Minimal 8" dia., opens to 10".144857� ........................................................$59.99

Additional�Nova�Accessories (not shown).Screw� Chuck� for� Cole� Jaws. Use while the Cole Jaws are still attached! About 13/4" long. RH thread.15M93� .......................................................$14.99Woodworm�Screw�Chuck. 19mm (3/4") long, RH.15M85� ....................................................... $17.99Jaw�Fastening�Spares�Kit - 8 extra screws, 2 Allen wrenches.15M87 ...................................................... $11.99

AB

Woodturning


NOVA�G3�ChuckThis is a great l itt le geared- action chuck, with powerful per fo rmance for its size and built to the same standards as the SuperNova® and Titan chucks! Designed for mini, midi and smaller lathes with up to a 14" diameter swing, this chuck’s small size and weight minimizes the load on smaller spindles and bearings. The G3 accepts all of Teknatool’s accessory jaws, although only those designed for smaller work are recommended. This chuck also includes an automatic jaw safety stop to keep the jaw slides from falling out. Teknatool also makes the jaw slides from iron composite impregnated with copper, which has outstanding qualities as an anti-seize and low-friction agent. Using the standard 50mm jaws (included) this chuck will handle up to 14" diameter bowls and turnings with up to a 6" length spigot. Chuck body is approximately 33/8" diameter, depth is 13/4" and 3 lbs. on the lathe spindle. Includes chuck body, woodworm screw, 50mm jaws, T-handled chuck key, manual and fasteners. Available without a threaded insert for turners who already own Nova chucks with removable inserts, or with your choice of the three most popular inserts.147016 G3 without threaded insert .......$149.99147017 G3 with 1" x 8 TPI .......................$144.99147018 G3 with 3/4" x 16 TPI ...................$144.99147019 G3 with 11/4" x 8TPI ....................$144.99150306 Nova 4-pc. Mini Jaw Set ..............$99.99

NOVA�AccessoriesNova jaw sets add even greater ver-satility to the Nova Midi, SuperNova2, and Nova Titan chucks. Each set is precision-machined from a high quality solid steel billet and comes with an easy-to-read instruction manual. Choose a set to match your project! The 25mm to 130mm Jaw Sets are all similar to “A” in the photo.

25mm� Jaw� Set substitutes for the standard 50mm jaws for use on small work with 3/8"-11/4" spigots, as a type of pin chuck with 1" capacity, for expand-ing dovetail work on bowls up to 6" diameter or for 1/2"-1" square blanks.15M86 ........................................................$39.99

35mm�Bowl�Jaw�Set. These 35mm dovetailed jaws fit perfectly into the current jaw range, picking up a small gap left between the 25mm and 50mm jaw sets. Even though these jaws are small, they are still capable of firmly holding medium-sized bowls with small bases.146214 ............................$39.99

50mm�Jaw�Set.�The 50mm jaw set will accommodate a bowl up to 12" in diameter. This is the standard jaw set included with Precision Midi and SuperNova2 chucks.128603 ....................................................... $47.99

(A)�100mm�Jaw�Set.�Expanding dovetail jaws hold bowls up to 14" diameter, contracting jaws grip spigots and bowl feet up to 31/2" diameter or square billets from 29/16" to 31/8".15M91 ........................................................$49.99

130mm�Jumbo�Jaws for holding large bowls and platters. Primarily designed for work over 16" in diameter up to a maximum of 291/2". Jaws will grip spigots from 4.2" to 5" and expand into dovetailed recesses from 4.88" to 5.86". Fits SuperNova2 and Titan chucks only.126358 .......................................................$54.99

(B)�Step�Jaws have three different dovetailed steps for optimum gripping of bowl feet from 15/8" to 31/4" diameter. Outside expand-ing dovetail fits a recess 3" to 4" dia. for bowls and platters up to 12". 15M92 ......................................................$49.99(C)�Spigot�Jaw�Sets are heavy section jaws with a powerful grip for spigot (tenon) turning. With 30mm (11/8") depth and a special serrated tooth form, these jaws really hang on to your workpiece. For work where a long overhang is needed or hollowing into endgrain, these jaws provide superior gripping power.15N81 35mm ..............................................$44.9915N82 45mm ..............................................$49.99

SuperNova�PowerGrip�Jaws. For SuperNova, Super-Nova2 and Titan Chucks.128178 .......................................................$59.99

(D)�Nova�Chuck�Spur�Drive�Center. This four-spur center was designed to be secured in the chuck by the standard 50 mm jaws.111190�� ....................................................... $17.99(E)�Face�Plate�Rings - when you want an extra-solid grip on your work. Designed to secure onto the exter-nal dovetails of the accessory jaws, Faceplate Rings come in three sizes for use on the following popular

A

C

BD

E

accessory jaws: 50mm, 100mm, and 130mm.144860 50 MM faceplate ring ..................$29.99144859 100 MM faceplate ring ................$39.99144858 130 MM faceplate ring ................$49.99

(F) Long�Nose�Jaw�Set.�With an internal dovetail and threaded serrations, this new jaw has a superior grip in the spigot mode – ideal for holding larger and longer tenons. The extra-long nose is invaluable when working near the bottom of a bowl, allowing extra distance between chuck and workpiece. Fits all Nova Chucks.146083 .......................................................$64.99

(G)�75mm�Bowl�Jaw�Set�fits Precision Midi, Super-Nova® and Nova Titan as well as the old Nova and SuperNova Chucks. The 75mm jaw sets are designed for an expanded dovetail grip, reverse dovetail grip for gripping footed bowls, limited spigot facility and provision to mount false wooden jaws, so customized jaws can be made for special purposes.146082 .......................................................$59.99

(H)� Nova� Pin� Jaws operate like a pin chuck but without the hassles! An extended 20mm (.79") cylindrical jaw expands into a 25mm (1") or larger hole and grips the workpiece like a traditional pin chuck. Jaws can also be used as compression mode spigot jaws.123548 .......................................................$54.99

G

F

H

WoodRiver®Turning�Chuck��The self-centering 4-jaw chuck features a wide range of jaw move-ment, quick action and a powerful grip in either expansion or contraction modes. Jaws will expand and grip in a 2"-3" dovetailed recess in the base of your turning. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 15/8" and 23/4" or square billets 11/8" to 21/8" in size. No disassembly or accessories are required to use the accompanying screw chuck which has a 11/8" long right hand thread. Chuck body is chrome-plated to protect against cor-rosion while the jaws are anodized black. Comes complete with screw center, locking levers, T-handled hex wrench for jaw screws and 8 extra jaw screws, in a plastic fitted storage case.

146800 3/4" x 16 TPI ...................................$86.50�146801 1" x 8 TPI ...................................... $86.50146802 11/4" x 8 TPI ...................................$86.50

Threaded�Inserts are available for those who want to use the same chuck on lathes with different thread patterns. Inserts compatible with WoodRiver®Turning Chuck only.146797 3/4" x 16 TPI insert .......................... $5.99146798 1" x 8 TPI insert .............................. $5.99146799 11/4" x 8 TPI insert .......................... $5.99

#1� Jaws for smaller work. Holds stock from 3/8" to 13/8" inside and 11/16" to 21/16" outside. Jaw length is 1".146804 .......................................................$20.99

#3�Jaws for larger bowls and platters. Holds stock from 31/4" to 41/4" inside and 313/16" to 413/16" outside.146805 .......................................................$34.9915M94 8 extra stops & screws ...................$10.99

Large�Flat�Jaws�make it easy to finish the bottom of plates and bowls. Grips outer edge of stock from 17/8" to 8" in diameter.146806 .......................................................$25.50

Extra�Jaw�Screws, package of 8.146803 ......................................................... $2.50

Marking & Measuring


Marking And Cutting Gauges(A) Rosewood Marking Gauge performs two operations. One side of its posts has a single pin for general marking with the grain or on end grain; its other side has double pins adjustable to approximately 2" for layout of mortises. Made with solid brass hardware, wear plates, and fitted with milled thumb screw in head. Overall length 73/4".145464 ................................................... $48.99

(B) Rosewood Cutting Gauge is designed for accurate scoring across the grain without tearing. The 1/4" single-beveled cutting iron is held in place by a brass wedge, and a brass thumbscrew grips the sliding post securely. Solid rosewood fence has two inlaid brass wear plates. Overall length 8".145465 .................................................. $34.99

AB

A-LINE-IT Systems Quickly setup, tune up, and check the accuracy of your shop’s tools with these systems. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table paral-lelism, jointer/planer knife alignment, outfeed table alignment; router/shaper spindle run-out, or any other set-up or alignment measurement you desire.A-LINE-IT Basic Kit is the perfect for hobbyists and small shops. Each kit contains a 3/4" x 3/4" x 51/2" dial indicator mounting bar, 3/8" x 3/4" x 61/4" miter groove bar with leveling screws and spring plung-ers for a perfect fit in your miter slot, dial indicator, hardware and hex wrench for assembly, and an instructional DVD.The A-LINE-IT Deluxe Kit includes all of the above but features an 11" long dial indicator mounting bar instead of the 51/2" bar, a planer bar, a precision 1/2" x 33/8" pin for drill press and router tests, special spring and arbor nut to test saw blade and arbor run out, 22-piece tip set for the dial indicator to meet any application, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines.148719 basic kit ......................................$79.99 148720 deluxe kit ................................. $144.99

10" Metal Sliding Bevel This high-quality Japanese sliding bevel sets with a twist of a rear-locking screw. The rear locking screw also allows you to lay the bevel flat on either side. The heavy 10" blade is mounted in an aluminum handle.146020 .................................................... $24.50

Loose Leg Wing DividersFor scribing circles, arcs, and stepping out equal distances in odd mea-surements. Includes one fixed leg and a hardened removable point that can be replaced with a pencil. The 6" divider has 81/2" scribing capacity, the 8" model has 131/4".06C21 6" .........................................................................................$66.9906C22 8" .........................................................................................$71.50

Wing DividersMake more accurate scribes or layouts. The tips of these heavy-duty scribes are precision ground for accuracy and finished with black epoxy coating for durability. The 6" divider has 8" scribing capacity, the 8" has 101/2", and the 16" has 22".148053 6" ..................................................................................... $15.99148054 8" ..................................................................................... $24.99148055 16" ....................................................................................$47.29

FASTCAP AccuScribePROThe Accuscribe Pro makes it easy to maintain a consistent scribe offset while remaining parallel to the object surface every time. The non-rocking base provides stability, and the articulating pencil head adjusts to accommodate difficult and awkward scribing applications such as scribing around windows and doors. Also ideal for scribing the trim strip on kitchen cabinets, architectural moldings, tile, countertops,

splash guards, and even flooring. Includes an oversized thumb screw, a convenient built-in pencil sharpener, and a removable compass point with its own storage clip.147402 .......................................................................................................................$17.99

CROWN Rosewood And Brass Marking SetWe’ve combined the beauty and reliability of imported rosewood and solid brass with three classic bench tools. Try Squares have blued steel blades triple-pinned to their handles. A 1/8" thick brass rub plate protects inside face for accurate readings. 101/2" Bevel with sliding steel blade can be easily secured at any angle by a brass thumb lever. Marking Gauge features an adjusting pull slide for fast layout of mortises. Rosewood post has double steel pins on slide face and a single pin on the reverse face. Rosewood fence has brass wear plates and set knob. Set of 3 includes marking gauge, 101/2" slid-ing bevel, and 6" try square.14C50 set of 3 Save Over $15! .........$79.99

Also available individually.14C41 marking gauge .......................... $38.9907F87 4" sliding bevel ...........................$19.99

Made in England

143016 101/2" sliding bevel.................... $30.99144563 12" sliding bevel ....................... $39.9914C33 3" try square ............................... $17.9914C15 4" try square .............................. $20.9914C11 6" try square.............................. $25.9914C19 9" try square...............................$27.99

PFEIL Swiss Made Marking Knife KitThese beautiful Swiss made marking tools are perfect for all your joinery layout work. Features a K720 steel blade with a 60° ground point that allows the knife to be used left- or right-handed. The round Bubinga handle with two small flats, to prevent the tool from rolling on your benchtop, fits in the hand like a pencil for accurate marking. Small blade -13/8" x 1/2", large blade-11/2" x 3/4", 7" overall length.05Z25 lg. blade w/handle 11/2" x 3/4" .....$19.9905B47 sm. blade w/handle, 13/8" x 1/2" ...$17.9905B46 set of two blades only .............................. save over $10 ...............................$24.99

PFEIL Swiss Made Marking KnivesMarking knives are the most accurate way to mark lines for fine joinery layout work. The flat steel blades on these knives are beveled on only one side so you can mark tight against your straight edge. These knives feature a K720 steel blade with a beautiful Bubinga handle that fits snug in your hand for easy gripping and control. Blade is 3/4" wide and 17/8" long; overall length is 6".05E72 (A) right hand .................................. $27.5005E73 (B) left hand .................................... $27.5005E74 set of two, save over $10 ...............$44.99

A

B

WoodRiver® Woodworker’s Pencil This unique pencil with extra thick (5.66mm, about 7/32" D x 31/8"L) HB round lead is held firmly in place

by a four-jaw collet. Unscrew the top to access an internal sharpener. Comes with HB (hard) lead.146807 .................................................... $15.99146769 4B soft lead (2) .............................$1.50146770 HB hard lead (2) ............................$1.50 147263 colored lead assort. .....................$4.99

Marking & Measuring


PINNACLE®

PrecisionTriangleSetServes as both a square and a 45° miter. The pocket-sized tri-angle is perfect squaring the in-side of boxes and drawers. Both the 41/2" and 61/4" triangles in the Pinnacle Precision Triangle Set are manufactured from anodized aluminum and are guaranteed in perpendicular accuracy to within .001". Both sides are laser engraved with inch markings, graduated in 16ths. The set comes in a fitted MDF wall-mountable case for storage. Pinnacle tools are available exclusively at Woodcraft. USA.147623 .......................................................$44.99

PINNACLE® PrecisionSteelStraight EdgeMost s t ra ight edges guarantee an accuracy of .001" per inch. As a woodworker, this may sound acceptable, but when you consider that this level of accuracy results in an error of approximately 1/16" (.048") at the end of a 48" straight edge, .001" per inch isn’t as good as it sounds. Pinnacle Precision Straight Edges offer an accuracy of better than .001" per foot, which means the error over the length of the 48" straight edge is less than 1/256". Now that’s accurate! Accuracies at this level really become important when setting up your table saw wings or jointer and planer infeed and outfeed tables. Pinnacle straight edges start out as a slab of hot roll steel, go through a stress-relieving heat treat process, are carefully ground on a massive surface grinder to extreme tolerances, and then finger slots are cut to improve handling. Finally, each precision tool is inspected on a certified granite surface plate to ensure its straightness. Both the 24" and 48" are 1/4" thick x 23/8" wide and comes with a wall- mountable MDF case. Pinnacle tools are available exclusively at Woodcraft. Made in USA.147859 24" steel straight edge ............. $89.99147860 48" steel straight edge ........... $189.99


PINNACLE® Precision T-SquaresDrawing straight, accurate lines can be challenging when only relying on a tape measure and a question-able straight edge. Each T-Square is an accurately machined, anodized, and laser-engraved aluminum beam featuring rules along both edges graduated in 1/32" increments and precisely spaced 1mm holes every 1/16". Need to mark a cut line 67/16" in from the edge of a panel? Just place your pencil in the 67/16" hole, slide the “T” along the edge and you’re done! Additional holes are machined on exact 1" centers for marking shelf pin locations. Accurate to .001" and guaranteed for life, each T-Square comes in an MDF fitted, wall-mountable storage case. Pinnacle tools are available exclusively at Woodcraft. USA.147631 12" T-square ...............................$79.99147632 24" T-square ............................ $109.99148484 32" T-square ............................ $129.99

PINNACLE®

PrecisionSquareThe accuracy of our machined a l u m i n u m square is bet-ter than .001" over the entire 8" x 12" size. Both the blade and base are machined from a single alumi-num block which results in a more accurate square than one using a two-piece blade and base design. The handle and the square are assembled together using two chrome hardened steel pins for rigidity and alignment. The square is anodized for durability, with laser-engraved inch scale markings for general marking and measuring. Includes a custom-fitted wooden MDF case for storage. Pinnacle tools are available exclusively at Woodcraft. USA.147630 .......................................................$79.99

PINNACLE® 24" Precision Straight Edge Rule Combines two of the more important measuring and layout tools a reliable straight edge and an accurate rule. Each inch and fractional marking is laser engraved to a positioning tolerance of .0002". Unlike a common tape measure, you will never question the accuracy of this ruler. Both edges are precision-milled for true parallel and reliable straight-ness. Comes in a fitted MDF wall-mountable case for safe and convenient storage. Pinnacle tools are available exclusively at Woodcraft. USA.150760 12" ..............................................$19.99147624 24" ...............................................$44.99150737 36" ..............................................$59.99

PINNACLE® Stainless Steel Gauge BlockSquare your saw blades, drill bits and bandsaw blades to your tables with this 13/4" Stainless Steel Gauge Block Milled from solid stainless steel stock on CNC machinery accurate to .0002" this tool is also quite useful when squar-ing small box-size drawers during assembly. Carry in your pocket or store it in the custom-fitted MDF tray. Pinnacle tools are available exclusively at Woodcraft. USA.147629 .......................................................$27.99

PINNACLE®®12" Precision Triangle No square can compare to the rigidity of a triangle. The triangle serves as a square and a 45° miter. Each 12" triangle is machined from solid aircraft-grade aluminum plate, anodized and laser-engraved with accurate inch scales along the right-angle legs and a centering scale on the long leg, both graduated in 16ths. Comes in a fitted MDF wall-mountable case for safe and convenient storage. Pinnacle tools are available exclusively at Woodcraft. Made in USA.148368 ...................................................... $69.99

PINNACLE® Woodworking RulesThe laser-engraved markings are more accurate than printed or stamped scales, they’re straighter, heavier and lay flat because of the recess down the center of the bottom surface. Other features include both a standard and a center scale so you don’t have to switch rules with edges beveled at 30° so the scales are easy to align with pencil marks.Made in the USA.148975 (A) 6" Pinnacle® rule .................... $13.99148976 (B) 12" Pinnacle® rule .................. $20.99148977 (C) 24" Pinnacle® rule .................. $31.99148978 (D) 36" Pinnacle® rule ................. $42.99

C

DA

B

WIXEY Digital ProtractorGet quick, accurate measurements of exist-ing angles from mitered trim work, crown mold-ing, roof slopes, or wall corners. This tool helps measurethe true angle of inside and outside wall corners molding and chair rail miter joints. Large display reads angles from 0 to 180°, and can be zeroed at any point in the swing of the protractor's leg - just read the angle measurement directly from the digital protractor. Each 9" long x 2" wide aluminum leg has built-in magnets to help hold the protractor to metal surfaces.148564 ....................................................... $59.99

ROTAPE Beam CompassThis compact, self-measuring compass draws circles or arcs with a 31/2" to 72" radius. Just set the tape at the desired ra-dius, locate the center point and draw your arc or circle. The positive locking tape retracts into the compass body like a tape measure. Rotape also works as a straight-line marking gauge.141871 ...................................................... $29.99

Marking & Measuring


French Curve SetIncludes four of the most popular curves used in drawing. Made of transparent acrylic plexiglass with smooth uniform edges that will not warp. Set of four, .060" thick.01P11 set of 4 .............................................. $9.99

24" Precision Straight Edge. Perfect for layout, check-ing the flatness of planes, power tool table tops, and the setting of jointers. 11/2" wide, .080" thick, with a .002" tolerance over the length of the blade. 129211 .......................................................$40.99

WOODCRAFT Hook Rules allow exact measure-ments from ends or edges without struggling to see both ends of your rule at the same time.

6" Hook Rule. Rigid, 3/4" wide and .040" thick, with 1/2mm increments one side, 1/32" on the other.128292 .......................................................$15.99

12" Hook Rule. Rigid, 1" wide and .040" thick, with 1/2mm increments one side, 1/32" on the other.129213 ....................................................... $35.99

24" Hook Rule. Rigid, 13/16" wide .040" thick rule, grad-uated in 1/64" on one side and 1/2mm on the other.129214 ...................................................... $53.99

WOODCRAFT Rules High Precision And Reliability For A Lifetime Of Accurate Measuring. These steel rules have been heat-treated and tempered to stand up to rugged use. Finished in a satin chrome so the precise gradu-ations, photochemically etched and black-filled, are easy to read. Made in the U.S.A., these rules meet official Federal specifications for accuracy.

6" Pocket Rule. Rigid, 3/4" wide, .040" thick, with 1/2mm increments one side, 1/32" on the other, reads left-to-right and right-to-left. 1/32" end graduations. 129207 ...................................................... $12.50

12" Bench Rule. Use this reliable tool for serious bench measurements. 1" wide rigid rule, .040" thick, with 1/32" and 1/64" on one side, 1mm on the other.129208 .......................................................$24.99

24" Shop Rule. For longer measurements where measurements with a 12" rule might impact ac-curacy. Rigid, 13/16" wide, .040" thick, 1/64" on one side, 1/2 mm on the other.129209 .......................................................$40.99

Woodworker’s Ruler Set. Our most popular 6", 12", and 24" rules.129215 set of 3 Save Over $8! ............$69.99

36" Shop Rule. Rigid, 15/32" wide, .040" thick rule is graduated in 1/ 32" and 1/64" on one side and 1/8" and 1/16" on the other.129212 ........................................................$77.99

Center Finding Rules Eliminate guesswork, math and the use of dividers. To find center, simply align the rule so the same measurement appears to the left of the “0” mark as appears to the right of the mark. The arrow will point to the exact center. Available in 12" and 24" lengths. Aluminum rules are 13/4" wide, stainless are 11/4".123022 (B) 12" stainless ......................... $11.99123041 (B) 24" stainless ..........................$12.99

A

B

Router And Saw Depth GaugesThese aluminum gauges make saw or router setup fast and easy. Just set the gauge across your blade or cutter and adjust to the required setting. Both are clearly marked in inches (both fractional and decimal) and millimeters. The Router Depth Gauge is designed for setting cutter depths from 1/16" to 11/2" in 1/16" increments. The Saw Depth Gauge can be used to set blades on radial arm, hand-held circular and table saws from 1/8" to 2" in 1/8" increments. 143294 router depth gauge .......................$8.99143295 saw depth gauge ..........................$8.9903K17 set of 2 Save Over $2! ............ $14.99

WoodRiver® Set-Up Block SetQuickly set up critical bit or blade measurements on your router, table saw, or drill press with this high-quality steel set-up block set. The set features 5 precision 2" long blocks (1/16", 1/8", 1/4", 1/2", and 3/4" thick) and a 1"-2"-3" block. By using combinations of the 2" long blocks and the 1-2-3 block you can easily make perfect, repeatable set-ups. Furnished in a plactic storage case to protect their accuracy. Precision ground to +/-.0002".148454 ....................................................... $31.99

WoodRiver®

Stainless Steel Cabinetmaker’s RulesThese high-quality rulers are also an excellent value. They are made of hardened stainless steel with deeply engraved graduations. The finest gradu-ations are in 64th’s and .5mm’s. The rear face displays an inch to metric and fraction to decimal

conversion table.140655 6" (150mm) .................................... $3.99140656 12" (300mm) ................................. $8.99140659 24" (600mm) ...............................$14.50140657 40" (1000mm) .............................$25.50140658 set of 4 Save over $8! ..............$44.97

Self-Stick Tape RulesPrecision steel, ready to mount on table saws, work benches, sewing tables, lathe beds or wherever you constantly need to check measurements. 1/2" wide tapes can be easily cut to shorter lengths. In 6' and 12' lengths reading left-to-right (illustrated) or right-to-left to meet your shop needs.08Y41 6' L-R .............................................$10.5008Y42 6' R-L .............................................$10.5008Y40 6' L-R & R-L, set of 2 ....................$18.5008W12 12' L-R .......................................... $12.5008W13 12' R-L .......................................... $12.5008W10 12' L-R & R-L, set of 2 ...................$21.99

Plastic Profile Copy GaugesReproduce any furniture trim or moulding profile to form an accurate template for tracing and cutting. An excellent alternative to wire models, these gauges are made of durable plastic. Fingers measure 1/16" W x 3/4" H x 4" L, and will not fall out or cross over each other. Copies shapes up to 13/4" deep. Two or more may be connected together for reproducing shapes longer than an individual copy gauge.144814 standard 5" width.......................... $9.50144815 large 10" width ............................ $16.50

Marking & Measuring


(B) Combination Tool. This versatile builder’s tool incorporates seven useful tools in one: rule, square, level, protractor, bevel, pitch-to-foot indicator, and plumb. It’s especially convenient for laying out complicated work that would otherwise require lengthy calculations. One side of the turret has a double graduation from 0° to 90°; the reverse side is graduated in 1/2" increments from 0 to 12" per foot pitch. The stock has four levels. Rule length is 24". This is the tool professionals rely on for accuracy.06G11 .....................................................$419.99

(C) Double Squares are as accurate as engineers squares and as adjustable as combination squares. They’re the perfect small-size tools for checking or setting 90° angles. Graduated rules are of hard-ened steel with precision-machined stocks. 6" size includes a spirit level.06E43 21/2" ...............................................$89.9906E44 4" ...................................................$59.9907F11 6" ...................................................$79.99

(D) Stair Gauge Fixtures. Clamp a pair to a carpen-ter’s framing square and you have the perfect gauge for laying out stair stringers, rafters, hexagons and other challenging cuts. With a full 13/4" of bearing surface, these generous-sized fixtures are more dependable and easier to use than smaller types. Nickle-plated steel. Supplied in pairs.06R14 .......................................................$39.99

A

B D

C

STARRETT Measuring ToolsFeature unerring American-made precision and dura-bility. Their century-old dedication to producing only the highest quality tools has earned them the well-deserved title of “the world’s greatest toolmakers”. Measuring tools have working surfaces ground to a demanding ±.00001". Rules are made of engraved, hardened, premium-quality steel finished with an easy-to-read satin chrome surface.

(A) Combination Squares. Each model features a machine divided, tempered steel rule and precision-ground head with 90° and 45° faces. A hardened scriber and spirit level are included in the 12" and 6" models. All rules are marked with 1/64, 1/32, 1/16, and 1/8 inch graduations. Center & Protractor heads are not included with square (see below).06R12 12" square only .............................$82.9906L21 6" square only ...............................$79.9906R19 4" square with center head .......$114.99Center Heads locate the center point of round or square stock, or layout 45° angles.06L11 for 12" square ............................... $37.50Protractor Head. For 12" square only. Locking pro-tractor featuring a spirit level and double graduations reading 0°- 180°.06R16 .......................................................$89.99Extended Length Rule. Expand the capacity of your 12" square by changing to a 24" rule.06R18 24" .............................................. $109.99

6" FractionalDigital CaliperTake accurate digi-tal readings in mil-limeters, inches or fractions at the touch of the function button. The large, easy-to- read, 1/2" x 11/4" LCD screen displays measurements in .0005", .01mm, or 1/64" resolutions. Make inside, outside and depth measurements to 6". Features include auto power off, zero setting at any position, extra battery and case.147828 ...................................................... $33.50

WIXEY Dual Display Fractional Digital CalipersThese are the ONLY fractional calipers available that display both the fraction and the decimal equivalent AT THE SAME TIME! Because other fractional digital calipers round up or down to the nearest fraction, you never know if you are exactly on your fractional measurement. The only way to ensure 100% accuracy is by toggling back and forth between the fractional display and the decimal display. With these calipers you can read the fraction and the decimal equivalent at the same time so you know that 1/2" is exactly .5", not .51" or .49". Constructed of high-quality hard-ened and ground stainless steel components with a large easy-to-see display which reads in inches with fractions or millimeters. The precision-ground measuring faces allow for outside, inside, depth and step measurements. The extremely accurate fraction readouts are displayed using “Precise Frac-tion Technology” which gives with decimal inches displayed in .001" increments and the millimeters in .01mm increments.147829 ...................................................... $39.99

Machinist’s ProtractorSetting angles was never this elegant, or accurate. Machined stainless steel protractor features an 111/2" long bar with 27/8" diameter dial. Markings are in minutes and degrees with a magnifying screen to increase ease of use and accuracy. Easy rotat-ing dial fits on bar quickly, and goes right to work. Locking and micro adjusting knobs are knurled for ease of use. Ideal for machine and jig setup where accuracy is essential. Includes a foam-lined, molded plastic case.143964 ................................................... $55.99

B

C

PINNACLE®

Combination SquareOne of the most valuable tools in any shop is the combination square. The problem is that most shop combo squares are cheaply made, and inaccurate. Enter the Pinnacle 12" combination square, a Made-in-the-USA tool, with a 12" stainless steel blade that is graduated in 8ths and 16ths on one side and 16ths and 32nds on the other and accurate to within +/- .003" between any two graduations, and +.006/-.004" from 0 to any graduation. The blade graduations are micro-fine etched with the finest grey iron castings for high contrast and the cast-iron heads are coated with a Hammertone Black Powder Coat finish. The square head is

WoodRiver® Fractional Dial CaliperIt didn’t exist so we had it made for us! One turn of the dial equals an inch, a feature that no other dial caliper has. Mea-sures to 61/2", calibrated in 64th’s of an inch. Caliper is machined from hardened stainless steel for long life, dial indicator is shockproofed. Comes in a foam-padded molded plastic case.143963 .............................. $51.99

accurate to +/- .005" and comes with a level vial and stainless steel scribe tool. Three-piece set includes 12" blade, square head and center finder in a blow-molded case.149872 (A) 12" combo square 3-pc. set ...$44.99 149873 24" blade ......................................$54.99149874 (D) 12" half-body protractor .........$42.9904P56 (B) 4" double square ....................$34.9904P57 (C) 6" double square ....................$39.99

PINNACLE® 4-Piece SetSet includes the three-piece set plus 12" half-body protractor body.149895 ........................................................$77.95

D

A

Marking & Measuring


Starrett®® Tempered Steel Rafter Square RS-24Starrett tools high standards of quality and work-manship show in this solid one-piece construction rafter square. The body is 24" long and 2" wide and the tongue 16" long and 11/2" wide, and square with the body. Graduations of 1/8" and 1/16" are on the face side and 1/10", 1/12" and 1/16" on the back side. Black enamel finish with white printed graduations and information.149894 .......................................................$14.99

82

WoodRiver® Curve Templates Transfer complex or compound curves from patterns or directly from your work piece. Just loosen the locking knobs, adjust the template curve, retighten the knobs and your curve stays locked in place. This handy tool eliminates the frustrating "creep" com-mon to most flexible templates ensuring that you get perfect curve reproduction every time.148455 37" template ............................ $39.99148456 107" template .......................... $69.99

14" Honing Plate Kit (147987) below. Both plates can be used with most sharpening jigs.147764 8" honing plate............................ $19.99147988 14" honing plate .......................... $34.99

Pinnacle 14" Honing Plate KitUse with the 14" long honing film for longer honing strokes, increased control and greater accuracy during the honing process. Kit includes the new 14" Honing Plate, 20" guides rails (to replace the original rails of your Pinnacle Honing Guide) and a 3-piece assortment pack of Honing Film. The Honing Plate is guaranteed flat within .003". 147987 ...................................................... $51.99147989 20" guide rails ............................$14.99

Pinnacle Honing Film: Each pack includes (3) 8" or 14" x 25/8" abra-sive film sheets de-signed for use with the Pinnacle Hon-ing Plate, Granite Surface Plate, or glass surface plates. Honing Film is PSA backed and can be used as such, or may be applied to the surface of choice with soap and water, for easy removal and reuse. 147766 8", 15 micron ................................. $4.99147767 8", 5 micron ................................... $4.99147768 8", .3 micron .................................. $4.99147769 8", assortment .............................. $4.99147991 14", 15 micron ............................... $7.99147992 14", 5 micron .................................. $7.99147993 14", .3 micron ................................. $7.99147990 14", assortment ............................. $7.99

Pinnacle Angle Gauge:Measure the bevel angle before and after sharpen-ing with a measuring tool specifically designed for this purpose. The Pinnacle Angle Gauge measures from 15 to 45 degrees. Precision machined, anodized aluminum.147765 .......................................................$24.99

PINNACLE� Honing GuideThe Pinnacle Guide comes complete with sled, rails, and instructions. The sled rides on the rails while holding your tool at the correct angle and depth making it imossible to sharpen past your set angle. This means you get the sharpest tools ever, with less effort, while extending the life of your tool. The sled has 6 primary bevel positions, 15, 20, 25, 30, 35 and 40 degrees, as well as 6 corresponding micro-bevel positions, 17 degrees through 42 degrees. The sled may be used alone on any smooth flat surface such as a granite surface plate (144838), plate glass, or with the rails. Holds most stones up to 3” x 111/2". The kit includes the Honing Guide, 8" Honing Plate and 8" Honing Film assortment pack.147763 guide ........................................... $ 99.99147771 guide kit Save Over $10! ....... $114.95

Pinnacle Honing Plates: These machined flat alu-minum sharpen-ing plates can be used with wet and dry sand paper as well as high perfor-mance film-based abrasives and are guaranteed flat to within .003". The 8" Plate can be mounted directly into the Pinnacle Honing Guide. The 14" Pinnacle Honing Plate permits longer, uninterrupted strokes, resulting in faster sharpening. To use the 14" Pinnacle Honing Plate with your Pinnacle Honing Guide, you’ll need the

Razor Sharp Edgemaking SystemAbsolutely the fastest, easiest way to put an edge on tools and knives we’ve seen. The Razor Sharp system is comprised of two laminated paper wheels, for either 1/2" or 5/8" arbors, one for grinding and one for buffing. Use the silicon carbide grinding compound/ wax and jewelers rouge on the wheels for a mirror finish. The System includes: grinding wheel, buffing wheel, silicon carbide, conditioning grease, jewelers rouge and instructions.124629 Razor Sharp System ....................$43.99151129 repl. grinding wheel .....................$22.99151130 repl. buffing wheel .......................$22.99151126 jewelers rouge ...............................$6.99151127 wax .................................................$6.99151128 silicon carbide ...............................$6.99

GRÖZEngineer’s SquaresThese all steel, p r e c i s i o n squares are handy for set-ting up table saw blades, jointer fences, and other ma-chine tools where accuracy is a must. They are also superb for marking out wooden joints or checking cut stock. All surfaces and edges are ground for straightness and parallelism and the squares are accurate on both inside and outside edges (not always the case with wooden body squares). No graduations appear on the blades. Set of three comes in a plastic storage case.141013 2" blade ......................................$14.29141014 4" blade ......................................$15.39141015 6" blade ......................................$19.99148041 set of 3 Best Value - Save $5 .. $43.99

PINNACLE® Story SticksA traditional story stick is just a stick of wood marked with the essential measurements for transfer to your project. The Pinnacle Story sticks are easy to set up, and extremely ac-curate. Transfer your pre-set dimensions perfectly, even repetitive marks on multiple pieces. Steel marking tabs feature a notched window for preci-sion placement on the anodized aluminum track’s engraved linear scale. Once the marking tabs are properly positioned, a small marking slot, cut into the tab allows accurate transfer of “story marks” to your workpiece. Totally adjustable, easily changed between right and left hand use, these sticks can even be used as a center scale to layout symmetrical projects. Remove the metal marking tabs and the Story Stick makes a very accurate stop rule or extra long shop rule. The 36" Story Stick features 1/32" graduations and the 900mm has one millimeter graduations. Each Story Stick comes with four metal layout tabs and one end stop. Made in USA.148746 36" Pinnacle Story Stick ......... $34.99148747 900mm Pinnacle Story Stick .. $34.99148748 pack of 4 repl. stops ................ $12.99

WoodRiver® Diamond 8" Grinding WheelIf you’re using an 8" grinder with aluminum oxide wheels to sharpen your turning tools, you’ve probably gone through more than a few of them. Aluminum oxide wheels are relatively inexpen-sive and do a nice job but now there’s something better—Woodcraft’s WoodRiver 8" Diamond Grinding Wheel. This 8" diameter wheel consists of a full 4 lbs of 7/8" wide aluminum plate which flares to 1" at the rim. The resin-bonded rand is loaded with diamonds and the 120-grit surface cuts quick and leaves an impressive finish and we have been unable to burn a tool—despite repeated efforts! 5/8" arbor hole.149479 .................................................... $149.99

Sharpening


www.woodcraft.com

A

WOLVERINE�Grinding�&�Sharpening�Jigs(A)�Wolverine�Grinding�Jig. Create accurate cutting angles and straight edges, easier and safer, in a fraction of the time it now takes! The Wolverine system is furnished with two bases, one to mount under each wheel, which permit two simultaneous grinding set ups. Each base accepts either sliding arm. Arms are effortlessly adjusted or secured by a cam locking device. The “V” arm attachment is 27" long and perfect for sharpening gouges, skews, chisels, or carving tools. The 3" x 5" platform jig uses quick release ratchet handles for angle adjustments and is perfect for sharpening scrapers. Complete with instructions for installation and use.125676 ........................................................$89.99(B)�Turner’s�Fingernail/Side�Grinding�Jig. Grinding difficult fingernail profiles on shallow spindle gouges and side grinds (also called Irish or long grinds) on deep fluted bowl gouges is quick and easy when you use the Vari-Grind Fingernail/Side Grinding Jig. The Vari-Grind com-bines “roll & swing” motion into one easily controlled movement that results in an edge so perfect you’ll be amazed at how easily you formed it! Use with Wolver-ine Grinding Jig (shown in use above), or any other “V” arm system, for maximum control and perfect, repeatable fingernail and side grinds.125677 .........................................................$55.99(C)�Wolverine�Skew�JigNow, sharpening skew tools is a snap. Simply attach the skew jig to the Wolverine V-arm, lock in place and you’re ready to go.127187 ...........................$30.99

Wolverine�Dressing�Attachment This wheel dressing attachment removes glazing and produces clean, truly round wheels quickly and easily. The precise adjustment knob allows you to remove as little as .002" per pass over the grinding wheel. Not pictured.127727 ........................................................ $67.99

C

B

WOLVERINE�Vari-Grind�2Produce and maintain prefect fingernail, and side grind, profiles on spindle and bowl gouges. The new Vari-Grind 2 offers “side restrained ac-tion” to keep the tool safely centered on the wheel, elimi-nating the chance for slipping of the wheel’s edge. Sharp, consistent profiles are easy because thetool rotates about the center of the adjusting rod allowing maximum flexibility, not only in matching a profile but also in creating your own. Available with or without the base.843656 complete w/base .....................$109.99843655 w/o base ..................................... $74.99

8"�Slow�Speed�GrinderQuiet, smooth 1/2 HP, 1,725 RPM slow-speed grinder is great for sharpening tools without generating the tool-destroying heat that you get so quickly from 3,450 RPM grinders. Unlike most grinders this slow-speed grinder comes equipped with 1" x 8" 120-grit and 60-grit white aluminum oxide grinding wheels. Includes tool rests and spark/chip deflector shields. 40 lbs., China.150780 .................................................... $109.99

Sharp�FastTM�Tool�Guide�Most turning tool gouges are sharp-ened on a grinder either freehand or with the aid of a “crutch” which makes it easier but not easy. You twist and turn trying to maintain the angle, “capture” the grind and stay on the stone. Not an easy task, until now. With the Sharp FastTM Tool Guide, you can easily match, change or create any grind on any 1/4" up to 3/4" gouge and do it over and over with the same result. It also prevents “over grinding” with a unique measuring device which permits you to control the depth of the grind. Your tools will last longer and edge to edge will be sharper than ever. Safety is unsurpassed because once you’re locked in the guide – you’ll never slide off the stone or have the tool ripped out of your hands. The Sharp FastTM Guide is fast, repeatable, accurate and safe. Turners at all levels benefit from sharper tools and this guide delivers.

Sharp�FastTM�S900�Basic�GuideThe basic guide was designed to fit systems that utilize the Wolverine style base. If you have a Wolverine, the basic guide is all you’ll need.149399 .....................................................$94.99

Sharp�FastTM S903�BaseThe Sharp� FastTM base is an open base on one side and mountable to either the left or right side of the grinder. The open base makes it easier to clean and protect from rust. 149400 .................... $32.99

Sharp�FastTM�

Tool�GuideSystemThe guide and base together for those who need or want both.149401 .....................................................$119.99

Wolverine�Platform�KitWe’ve taken one of the Wolverine’s standard bases and platforms to create a kit for sharpening chisels and plane blades using an ordinary grinder. The base attaches to the bench underneath the grinder and features Wolverine’s system of adjustment so distance from base to the stone is easily set. If you would like to increase the versatility of your grinder this is one of the best accessories you can own. Some assembly required.150878 ........................................................$59.99

Norton�3X�Grinding�Wheels1750 or 3500 RPM, slow or fast, 6" or 8" it doesn’t matter. Norton’s 3X grinding wheels are the fastest cutting, coolest wheels on the market. Norton’s patented SG grain gives the 3X’s an incredible burn free cut with controlled micro grain fracturing that constantly exposes fresh cutting material to keep tools cooler, while cutting faster. Faster cutting and less burning also means longer wheel life. Two grits are available; 46 grit for heavy grinding when establishing a new bevel or an 80 grit for creating a working edge on turning tools or a primary edge on a plane blade. The 6" wheel includes bushings for 1/2", 5/8", 3/4" and 7/8" shafts, while the 8" wheel includes bushings for 5/8", 3/4" and 7/8" shafts. 46 Grit 80 Grit Dia. Width838742� 838741 ..... 6" ....3/4" ................... $37.99838744� 838743��.... 8" .....1" ....................$49.99

Camel�Aluminum�Oxide�WheelsAluminum Oxide grinding wheels are made from granulated aluminum oxide with a vitrified bond which permits the surface to fracture under use, constantly refreshing the cutting surface. This means faster grinding and more importantly, cooler grinding. If you’re a turner, these wheels are a must. Pink wheels are a little harder than the white, so they are more resistant to grooving and will require less dressing. 60 Grit 120 Grit Dia. Color Width01W44� 01W43 ......6" ... White ...3/4" .........$26.9901W48� 01W47 ......8" ... Wihte ....1" ..........$39.99N/A� 127251 .....6" .... Pink ....3/4" .........$35.99N/A� 127253 .....8" .... Pink .....1" .......... $41.99

Sharpening


Get�The�Accessories�You�Need�With�Our�TORMEK�Master�Kits!

839787�Hand�Tool�Accessory�Kit��.......................� Save over $7! ........................ $165.99�

839785�Woodturner's�Accessory�Kit��.................� Save over $20!�......................$304.99�� 148985�T-7�&�Hand�Tool�Kit .................................. Save over $19! ...................... $749.99�148986�T-7�&�Woodturner's�Kit ............................. Save over $29! .................... $869.99�148987�T-7,�Hand�Tool�&�Woodturner's�Kits�...........�� Save over $57!�.......................$999.99

TORMEK�T-7�Water�Cooled�Sharpening�System�The T-7 is rated for con-tinuous use and has a vast array of specialty jigs available. The heart of the T-7 is the Tormek SG-250 10" x 2" grinding wheel turning at a slow 90 rpm through water which acts as a lubricant for faster grinding. After grinding, the 83/4" x 11/4" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. Other features include durable drive wheel; stainless steel main shaft; acme threaded tool rest with micro adjustment; Square Edge Jig for chisels and plane irons; 110 volts, 200W, 60Hz, 1.5 Amps, 37 lbs; 7 year warranty. System includes the Angle Master, Honing Compound, Stone Grader, Diamond Truing Tool, Square Edge Jig, Handbook and Instructional DVD.

�148103 ................................................. $599.99

Universal�Gouge�Jig143921 ...............$86.99

Tool�Rest�With�Torlock11Q50�� .................$33.99

Knife�Jig11Q37 .................$34.99

Long�Knife�Jig840765� ................$49.99

Jointer/Planer�Blade�Jig11Q44 ..............$172.99

Scissors�Jig11Q39�� .................$46.99

Axe�Sharpening�Jig11Q43�� ................ $16.99�

Diamond�Stone�Dresser147748� ................ $79.99

Stone�Grader11Q45 ................$25.99

Profiled�Leather�Honing146034� ................$57.9911Q49� repl. whl. .$61.99�

Honing�Compound11Q46�� ................... $8.49

Short�Tool�Jig142899� .............. $24.99

T-7�Repl.�Stone�SG25011Q47� std. ....... $167.99149544� black ....$189.99149545� waterst. $229.99

Turning�Tool�Setter147490 ...............$30.99

Turner's�Instruction�Box839786 ................$31.99

Square�Edge�Jig840358� ................$53.99

Tormek�Cover129824� ...............$23.99

Multi�Jig129353 ................$61.99

Pro�AngleMaster129354 ...............$23.99

Handbook143923 ................$31.99

Tormek�T-3The T-3 is the latest innovation in what many consider to be the finest water cooled sharpening system in the world. This economical priced unit still sharpens like a Tormek but the lighter weight design makes it more suitable for the occasional use hobbyist. The T-3 uses a smaller (200 mm) stone wheel and a less powerful motor to reduce costs. Use any Tormek

accessory with this machine (except the 250mm stone) and you can achieve precision and versatility once available only to the professionals. 115V, 60 Hz, maintenance free motor. 7 yr. warranty. Includes a square edge jig; angle master; honing compound; HB-10 users manual and the Tormek DVD.148962 ..................................................... $354.99

TORMEK�Bench�Grinder�Mount�Includes a Universal Support, a horizontal base, hardware, feet, comprehensive instruction booklet for building the base and safely using the dry grinder. 150157� �........................................................ $59.99

TORMEK�DBS-22�Drill�Bit�Sharpening�AccessoryThe Tormek DBS-22 allows you to sharpen poorly sharpened bits, or to create fresh, sharp, accurate cutting edges on dull bits, by creating 4 facet edges on the twist drill. Your newly sharpened drill bit now has two edges, each with a primary and secondary bevel which meet at a point in the exact center of the bit that stay sharp longer and will allow you to easily position the bit to produce accurately sized, straight holes. The DBS-22 accepts bits from 1/8" to 7/8" in diameter and is compatible with all Tormek models.151248 ..................................................... $254.99

TORMEK�Advanced�Water�Trough�Standard on New T-7’s, Tormek’s Advanced Water Trough fits all T-7 and older models except T-3’s and is a “MUST” have upgrade. The new trough features a wider lip, long tool chute and a pair of tilt feet, all designed to help contain the water and keep it off your bench. This is reason enough to replace your old trough but the advantages of this upgrade don’t stop there. The new trough contains a powerful earth magnet to collect the metal filings that fall into the trough and mix with the water, so your stone stays clean for faster, improved sharpening.151247 ........................................................$22.99

Sharpening


Granite�Surface�PlateUsually only found in machine shops, the super-flat face of a granite surface plate is ideal for leveling plane beds, flattening water stones, and general sharpening duties. Simply soak a piece of wet dry sandpaper in water and lay it on the stone, the capillary action of the water adheres the paper to the stone eliminating the need for spray adhesives or PSA sand paper. When done, wipe clean with a paper towel. Plate is 2" x 9" x 12", tool room “A” grade with calibration certificate.144838 ........................................................$31.99

A

B

C

DMT�Dia-Sharp�Bench�StonesDia-Sharp continuous diamond bench stones are guaranteed not to hollow or groove. These precisely engineered stones assure consistent, even sharp-ening every time, and are ideal for knives, blades and fine tools. Sharpening with diamonds is fast and easy. No messy oils needed - sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service, and diamond grade is clearly marked on side of stone.819981 (A) 6" x 2", 325 grit .......................$33.99

819980 6" x 2", 600 grit ............................$33.99819979 6" x 2", 1200 grit .......................... $37.99147303 (B) 8" x 3", 325 grit .......................$64.99411912 8" x 3", 120 grit ............................$96.99411913 8" x 3", 220 grit ............................$64.99147304 8" x 3", 600 grit ............................$64.99147305 8" x 3", 1200 grit ..........................$64.99411914 8" x 3", 8000 grit ..........................$96.99147306 (C) 111/2" x 21/2", 325 grit ............$89.99147307 111/2" x 21/2", 600 grit ..................$89.99147308 111/2" x 21/2", 1200 grit ................$89.99

DMT�Double-Sided�Dia-Sharp�StonesQuickly hone a razor-like edge with the uninterrupted diamond sharpening surface of DMT’s Double-Sided Dia-Sharp stones. These continuous diamond sur-face stones provide cutting edge performance and are recognized for their superior quality. The 2" x 6" size is great for both chisels and knives. Sharpening with diamonds is fast and easy. No oil is needed. You can sharpen dry or with water.147299 325/200 grit ...............................$59.99147300 600/220 grit ...............................$59.99147301 600/325 grit ...............................$59.99147302 1200/600 grit .............................$59.99

�A

�B

�C

DMT�Diamond�Honing�ConesProvide quick, convenient deburring and honing of carving tools, router bits, or any curved metal tools or fixtures. All sizes are supplied with a fine 600 grit diamond surface. The 4" cone includes a handle and tapers from 3/8" to 1/8" diameter. The 6" and 8" cones are unhandled and taper from 3/4" to 3/8" and 11/4" to 3/4" respectively. Buy all three and receive a free hardwood cherry box.07W66 4" cone w/handle ........................ $34.9907W65 6" cone ......................................... $35.9907W67 8" cone ......................................... $45.9907W68 3-pc. set Save Over $21! ...........$94.99

DMT�Diamond�Wave™DMT has developed the first diamond sharpener to combine convex and concave abrasive surfaces. The Diamond Wave™ provides radii from .0625" tapering to 1.000" which accommodate any turn-ing or carving gouge plus at 10" in length, enables a much longer sharpening strokes than traditional slips stones. Spend less time sharpening and get a better edge, faster than ever before! Available in two grits: 600/25 micron for coarse work - removing chips, burrs and re-establishing a bevel and 1200 grit/9 micron for a razor sharp edge.149903 1200 grit/9 micron ......................$59.99149904 600 grit/25 micron .....................$59.99�

DMT�DuoSharp�&�DuoSharp�Plus(A)� DuoSharp� Diamond� Stones. A double-sided bench stone is not only more convenient to carry (one stone instead of two), but it’s money saver too! They’ll sharpen, hone and lap, all types of woodwork-ing tools including knives, chisels, plane blades, gouges, and carbide router bits. Stones measure 8" x 25/8" and 10" x 4". Includes a non-skid mat to prevent slipping on work surface.140963 8" 1200/600 grit..........................$99.99140964 8" 1200/325 grit ..........................$99.99140965 8" 600/325 grit ............................$99.99140966 8" 325/220 grit ............................$99.99817198 10" 1200/600 grit ......................$129.99817199 10" 1200/325 grit ......................$129.99817200 10" 600/325 grit ....................... $129.99817201 10" 325/220 grit ....................... $129.99

(B)�DuoSharp�Plus.�These stones have all the fea-tures of the standard DuoSharp stones with the bonus of a solid diamond coated area for sharpening small or pointed tools. This feature is like having a 6" honing stone and a sharpening card all in one stone. Bonus�-�Buy�the�Stone�and�Base�combo�and�Save�Over�$16!146026� 8" 1200/600 ................................$94.99146027� 8" 600/325 ..................................$94.99146024� 8" 1200/600 w/base ..................$99.99146025� 8" 600/325 w/base ....................$99.99

(C)�DMT�DuoSharp�BaseHolds DMT DuoSharp stones securely in place and elevates them off the work surface for more accuracy and comfort. 141103 ........................................................$22.99

�A

�B

�C

DMT�Dia-Sharp�Offset�Mini-HoneSharpen, deburr, and hone safely in tight spaces on your circular saw blades or router bits. The offset design of the Mini-Hone offers better control for hard to reach areas. The uninterrupted monocrystalline diamond surface lets you quickly put a razor edge on pocketknives and small contact area tools. Kit contains one of each grit. Tip measures 21/2" x 3/4", .033" thick.147295 blue, 325 grit ...................................$7.99147296 red, 600 grit ....................................$7.99147297 green, 1200 grit ..............................$7.99147298 3-pc. set Best Value .................. $21.99

DMT�Monocrystalline�Diamond�Honing�StonesHigh technology combines the hardness of diamonds with the toughness of plastic to give you excellent sharpening results. Fine monocrystalline diamond particles are permanently fixed to a flat plastic base in a unique screen pattern. Water is used as the lubricating wash for sharpening all tool steels, even carbide edges with minimum cleanup and care. 6" x 2", available in four grits.07W76 6" extra fine 1200 grit ...................$48.9909C42 6" fine 600 grit ..............................$48.9909C43 6" coarse 325 grit..........................$48.9902P15 6" x-coarse 220 grit .......................$48.99

Sharpening


PINNACLE��Arkansas�StonesTrue Arkansas Novaculite is renowned for its abil-ity to both cut and polish steel. There is no finer natural stone or a better value in sharpening today. These stones are best used with either oil or water as a lubricant to help float away metal particles. However, you cannot use water once oil has been introduced and used on the stone as it will no longer absorb water.

(A)�Washita stones are the softest and most aggres-sive. Used for taking out large nicks, re-beveling and flattening. Stone colors may vary, box included.07O16� 6" x 2" x 13/16" ..............................$21.99145723� 8" x 3" x 1/2" .................................$23.99

(B)�Soft�Arkansas stones are slightly softer than hard Arkansas. Best general-duty stone for multi-purpose sharpening. Stone colors may vary, box included.07G20� 6" x 2" x 1" .................................. $21.99145722� 8" x 3" x 1/2" .................................$23.99�

(C)�Hard�Black stones are the hardest and finest stones. Used for a honed, highly polished edge.07O14� 6" x 2" x 1" w/box .......................$45.99145721� 8" x 3" x 1/2" w/box .....................$49.99

(D)�Boxes�For�Sharpening�Stones�are handcrafted.02R11 fits 6" x 2" x 1" stone .................... $6.9902R12 fits 8" x 2" x 1" stone�.................... $6.99

Arkansas� Stone� Sets� includes the full range of grits – Washita, soft and hard. Hardwood storage boxes included.07O30� 6" set of 3 Save over $16!�....... $79.99145724� 8" set of 3 Save over $14!�.......$89.99

(E)�Pinnacle�Arkansas�Combo�StonesOne of the best values in sharpening, combos are created by bonding two thin stones of different grits or properties together to create one stone. For our stone, we chose a soft white (general sharpening) stone and a hard black (polishing) stone to make the perfect combo for handling all your sharpening needs. Both come in a wood storage box with a hinged top. Two sizes available.149102��4" x 2" x 3/4"�................................... $19.99149103��8" x 2" x 3/4"�................................... $29.99

(F)�Pinnacle�Hard�White�Arkansas�File�Set3 files (triangle, round and square) and a knife edge slip. Perfect for de-tail polishing, re-moving burrs, or dressing the insides of small tools. All files are approxi-mately 33/4" long. Knife-edged slip is approximately 33/4" x 1/4" - 1/8". All neatly packaged in a wood storage box with a hinged top.149101� �..................................................... $29.99

A

BC

D

EB

F

E

Cone�Gouge�SlipstonesThe tapering concave and convex sur -faces of these stones simplify the sharpening of gouges. The convex surface deburrs the in-side edge and the concave surface the outside edge. Stones measure approximately 6" long. Large ends are 2" wide x 1" thick tapering to 1/2" wide. Oil stones are 1/2" thick and waterstones are 5/16" thick on small end.

Oil�Stone�Cone�Gouge�Set includes medium and fine Crystolon (silicon-carbide abrasives) and fine India (aluminum-oxide abrasives) stones.07E20 set of 3 Save Over $13! ........... $74.9907E03 medium crystolon ....................... $37.9907E04 fine crystolon ...............................$30.99140950 fine India ..................................... $19.99

Waterstone�Cone�Gouge�Set includes man-made, fast-cutting aluminum-oxide stones for sharpening and honing.09T60 set of 3 Save Over $13! ............$92.9909W14 180 grit stone ...............................$38.5009T11 1000 grit stone ............................. $27.9909T21 4000 grit stone ............................$39.50

Arkansas�Multiform�Slipstones�Fit� Both� Gouges� And�V-Parting�Tools!The two different edge shapes makes these stones universal sharp-eners. One edge is tapered from a 1/2" to 1/8" diameter to handle the various curves on tools. The second edge is a straight, angled taper knife edge for honing small and large V-parting tools. Stones are approximately 4" x 2" with 1/2" to 1/8" tapers.08Y32 soft white .....................................$14.9908Y22 hard white ....................................$16.99141924 hard black ....................................$28.99142345 set of 3 Save Over $3! .............$56.99

Knife-Edge�SlipstonesA Woodcraft exclusive! We have these novaculite stones made to our specifications for precise hon-ing of small and intricate tool edges. The 3" length gives you a longer honing stroke, while the 11/8" width keeps your fingers safely away from sharp tool edges during use. The 30° knife edge reaches deep into the inside corner of V-parting tools. The opposite edge has a 3/16" radius that nicely finishes the inside surfaces of small curved tools. These are the finest stones available for honing cutting edges on carving tools, molding plane cutters, router and drill bits, or miniature turning tools. 5/32" thick.07O07 hard Arkansas slip .......................$15.9907O08 soft Arkansas slip .........................$14.50141922 hard black Arkansas slip ..............$17.50142062 set of 3, oil & box Save $17! .....$30.99

Sharpening�Stone�Comparison�Guide

Compares approximate abrasive grit relation-ships of American and Japanese stones.

US Japan Stone Type Grit GritCoarse Crystolon, Coarse India 100 150Medium Crystolon 180 240Medium India, Coarse Diamond 240 280Fine Crystolon, Fine India 280 360Medium Diamond 320 500Washita 350 600Soft Arkansas 500 1000 1200Hard White Arkansas, Fine Diamond, Medium Black Ceramic 700 2000Hard Black Arkansas, 900 4000 Ultra White Ceramic 6000

Jointer�Blade�HonesKeep your jointer and planer knives razor-sharp and knick-free without ever removing them from the cutterhead! Simply unplug your machine, lock the cutterhead in position, align the 4" hone on the knife edge and with a few quick strokes you’re back to cutting. Aluminum oxide hone has 180 and 400 grit surfaces and should be lubricated with oil prior to use. Diamond has 300 and 600 grit surfaces and may be used dry or with water lubrication.09T14 aluminum oxide hone ..................$14.99123679 diamond hone ..............................$34.99

PINNACLE��Arkansas�3-Stone�Boxed�SetT h i s s e t includes three A r k a n s a s stones (soft, hard white and hard black) in a wood stor-age box. Each stone mea-sures 6" x 2" x 1/2" and is stored in its own slot within the box. Includes 4 oz. of honing oil.144788 ........................................................$52.99

COUNT ON US FROM START TO FINISHTM

Sharpening


(D)�Coarse�Grit�Japanese�Water�Stone for flattening and shaping carbide or carbon tool steel blades. Silicon carbide abrasives rapidly remove metal. Recommended for initial sharpening of dull edges or removing nicks. 8"L x 21/8"H x 31/8"W.09C21 240 grit.......................................... $51.99

(E)�Water�Stone�Holder. Contoured rubber holders keep stones secure during use and provide a non-slip base while sharpening. Arms are made from chrome-plated steel to resist rusting. Holder accepts stones measuring 51/2" to 9" in length.09T12 ........................................................ $17.50

Fast-Cutting�Japanese�WaterstonesUnlike Western man-made stones, water rather than oil is used on Japanese stones to prevent the surface from being clogged with metal particles. We offer two classes of stone: coarse and finishing. The coarse stones are 250, 800, 1000, and 1200 grit. The 250 and 800 grit are faster cutting and used for repairing nicked edges or reshaping a bevel. The 1000 or 1200 grit stones are used for the first stage of the actual sharpening. The polishing stone or Shiage Toishi contains a polishing compound. A polished edge is quickly established, and unlike harder western stones, any trace or wire edge is removed in a single sharpening. Japanese water stones are softer than Western styles causing a fresh, sharp surface to be continually exposed to the tool edge.

(A)�Combination�Water�Stones.04H22 8" x 2" x 1" 250/1000 ..................$24.5009C31 8" x 2" x 1" 1000/6000 ................$33.9908T41 71/4" x 21/2" x 1" 800/4000 .........$29.9909A21 71/4" x 21/2" x 1" 1200/8000........$63.99

(B)�Nagura�Stone. It is rubbed in a circular motion over the wet polishing stones to quickly get the abra-sives into a paste consistency to save sharpening time and encourage even wear on stones. Approx. size 7/8" x 7/8" x 3".146078 ....................................................... $12.99

(C)�King�Brand�Deluxe�Coarse�Stones. For repairing and reshaping tools, 81/8" x 25/8" x 13/8".11H31 800 grit ..........................................$24.9911H21 1000 grit ....................................... $25.9911H11 1200 grit.........................................$27.99

E

D

A

C

B

ICE�BEAR�WaterstonesIce Bear waterstones cut fast and produce the superior scratch patterns so necessary when moving through the grit range to progressively fine stones. Whether you stop at 4000, 6000 or continue to 8000 and beyond, these stones make the task of polishing your blade’s edge easier and faster than ever before. All stones are approximately 71/4" x 23/8" x 3/4".149289�4000 grit�........................................ $25.99149290�6000 grit�.........................................$27.99149291�8000 grit�........................................$64.99

NORTON�WaterstonesIntroducing Norton’s premier system for sharpening woodworking tools, knives, cutlery and other blades. Their synthetic water stones can produce a surface that is almost unbelievably bright and chrome-like while putting a legendary edge on cutting tools. Coarser grit stones are used to remove nicks and for first step sharpening of badly dulled tools. Mid-range grits, 1000 and 4000 take that shaped edge to a very sharp edge, while the 8000 grit is the finishing stone that brings your final cutting edge up and completely removes scratches from the surface. Care must be used to keep from moving coarser grits onto the surface of finer stones, so each tool must be carefully wiped down before it is moved up a step in the sharpening process. Prior to use, stones should be immersed in water for 10 minutes and kept wet during sharpening. The 8000 grit polishing stone needs only a splash of water on the surface to cut properly. These stones quickly expose a fresh cutting surface for use, which over time creates a sort of dish effect. The stones may need flattening with some frequency. The Set of 4 includes 220, 1000, 4000 and 8000 grit stones. All are 1" x 3" x 8".822459 220 grit ........................................$25.50822460 1000 grit ......................................$43.50822461 4000 grit ..................................... $58.50822462 8000 grit ..................................... $88.99144269 set of 4 Save Over $21! .........$194.99

Combination�Stones. The double grit stones reduce the cost of getting started with waterstones, while providing a full selection of grits. The 1000/4000 stone is a fine general-use stone, while the 220/1000 works as a starter stone if your tools are in rough shape. The 4000/8000 stone is a finish stone set. All are 1" x 3" x 8".818262 220/1000 grit .............................$36.99818263 1000/4000 grit ...........................$56.99830575 1000/8000 grit ...........................$65.99818264 4000/8000 grit ..........................$78.99

Carver’s�WaterstonesSharpen every gouge, chisel, and skew in your tool roll with our King brand waterstones. Each set includes a 21/2" long teardrop-shaped slipstone and a 41/4" x 21/2" x 1/2" stone with five concave profiles on one side and a smooth face on the other. The 1000 grit stone is for general sharpening, leaving a polished finish. The 4000 grit is for final honing, leaving a mirror finish.140325 1000 grit set .................................$22.99140326 4000 grit set .................................$23.99140327 set of 2 Best Value! ................... $36.99

Japanese�Water�SlipstonesMeasuring 21/2" x 1" x 1/4", these slips are small enough to sharpen the narrowest gouges, chisels, and V-tool profiles, yet thick enough to last for years. Each grit set contains 4 different styles; the 12-piece set contains all three grit sets. 1000 grit is for general sharpening, the 4000 for final honing, and the 8000 for a brilliant polished, razor’s edge.140564 1000 grit 4-pc. set ........................ $21.50140565 4000 grit 4-pc. set .......................$23.99140566 8000 grit 4-pc. set .......................$32.50140567 12-pc. set Save Over $23! ........$54.99

NORTON�Flattening�StoneThe softness of a water stone allows it to quickly develop a fast cutting abra-sive slurry. That’s a real plus for hon-ing, but a negative when you start to develop shallow in-dentations and irregularities in the surface. Norton’s new flattening stone, when rubbed across your water stone’s surface, quickly flattens and refreshes the face. Its coarse grit silicon carbide promotes maxi-mum cutting while the diagonal grooves provide a path for material removal during the process. Stone measures 9" x 3" x 3/4", includes a plastic case for storage and easy-to-follow instructions for use and maintenance.833914 ........................................................$26.99

Sharpening


Leather�PowerstropsTM

For use with your power drill or chucked motors and polishing heads, these laminated leather wheels act as rotating strops for fast honing action. Treated leather stays firm under pressure and holds abra-sive compounds longer for more efficient use. Each includes a stick of jewelers rouge and 1/4" threaded arbor. Not to exceed 600 RPM.

Vee�Powerstrop for veiners, V-parting tools, and small radius gouges. 31/2" diameter x 3/8" thick.15T21 ..........................................................$24.99

Wheel�Powerstrop for sharpening knives, chisels, or gouges. 31/2" diameter x 3/4" thick.08R31 ........................................................$24.9915T31 vee & wheel set Save Over $10! $39.89

SlipstropWith the included Flexcut Gold polishing compound, the Slipstrop works to keep an edge on carving tools that is unsurpassed. The Slipstrop is specially molded to polish and deburr hard to reach areas inside V-tools and gouges, as well as do a fine job on outside bevels. The Flexcut Gold polishing compound applies to the strop like a crayon, and quickly polishes hardened steel. Together, the two produce the finest possible edge for carving tools.143657 .......................................................$13.99143656��replacement honing compound ...$6.99

A

BSHAPTONGlass�Ceramic�Water�StonesShapton Glass Ceramic Water Stones are the finest manmade ceramic water stones….period! This claim is based largely on two properties - the speed at which the Shapton stones cut and the edge they create. Shapton stones are designed to be harder, faster cutting, and denser than any other ceramic water stone on the market. Because they remove material quickly, the time required to hold a tool angle on the stone is reduced, making free hand sharpening much easier. Equally important to cutting speed is the consistency of the finished edge. The sharpest cutting edge is created by the finite intersection of two highly polished, flat surfaces. The finishing grits (16000 and 30000) of the Shapton stone system leave a polished surface free of scratches creating a mirror finished, razor sharp edge. Each stone is comprised of a 5mm thick glass backing plate fused to a 5mm thick stone and measures 23/4" W x 81/4"L. We recommend purchasing, and using, the Shapton stone holder. As it provides a secure platform and protects your stone when in use. 834941 (A) 1000 grit ...................................$49.00834943 4000 grit ........................................$62.00834944 6000 grit .......................................$69.00834945 8000 grit ........................................$88.00834946 16000 grit ....................................$112.00834947�30000 grit ....................................$310.00839778 (B) stone holder .............................$88.00

SHAPTON�Diamond�Glass�Lapping�PlateFlat is the foundation of any sharpening system….flat backs, flat bevels, flat tools and flat sharpening stones. Why is flat important? The sharpest cutting edge is the intersection of two perfectly flat areas of the tool, the bevel and the back. Since the surface of the tool will mirror the stone it was sharpened on, it is critical that the sharpening stone be flat. The Diamond Glass Lapping Plate, is flat to ± 5 microns, and will easily return Shapton stones to perfect flatness. Keeping your stones flat means sharper tools, but it will also ensure even wear for longer stone life. For optimum sharpening results, Shapton stones must be flattened after each use.833886 ..................................................... $320.00

Natural�Polishing�WaterstoneAn extremely fine (12,000+) grit natural waterstone quarried in the Guangxi province of China. This stone is dense and perfect for final polishing on all your carving tools, plane blades, chisels or any tool requiring a keen edge. If you’ve been wanting a natural polishing stone but have been putoff by the cost, we urge you to try these stones.144950 8" x 23/4" x 11/4" ...........................$34.99144951 8" x 2" x 1"....................................$19.99

Spyderco�Ceramic�Sharpening�StonesCeramic stones unlike man-made Japenese waterstones or man-made oil stones, require no lubrication. The medium (brown) stones have a grain structure ideal for reshaping a blade or removing nicks and will show wear over time or with heavy use. The fine and ultra fine (white) stones do not wear at all and have a grain structure that excels at polishing the edge of any steel.

Bench�StonesGuaranteed flat (with-in .020), these 2" x 8" stones are ideal for sharpening and pol-ishing a wide variety of chisels or plane blades. Each stone comes packed in a rigid polymer case with rubber feet.835910 medium/600 grit ........................$48.99835911 fine/1800 grit ..............................$48.99835912 ultra fine/2000 ...........................$69.99147955 Set of 3 Save Over $22 ............$144.99

Pocket�HonesAt just 1" x 5", these Pocket Hones are just the right size from pocket knives to small carving tools. Leather pouch included. 835914� medium/600 grit ........................$23.99835915� fine/1800 grit ............................. $21.99

File�SetThe multiple pro-files offered in this set are perfect for small wood carv-ing tools. All the files are a single, fine/1800 grit. The set of four files includes a round, square, triangle and heart shaped slip and a protec-tive, snap-front suede pouch. 835913 ........................................................$44.99

ProFilesOriginally designed to sharpen knives and fish hooks, but can also be used for a variety of sharpening jobs. The set includes 2 files (1 medium/600 grit and 1 fine/1800 grit) 3/4" wide by 8" long with an elliptical profile shape. Each file has a flat surface and large radius for plain edges, a small radius for serrated edges, and a groove that runs the length of the stone.147958 ........................................................$49.99

Micro-Fine�Honing�CompoundT h i s g r e e n , chromium oxide compound works well with leather power strops and felt wheels operating at or below the 1,750 RPM range. Charge your leather bench strops for superior hand-honing of tools. The .5 micron particle size leaves a cutting edge on your plane irons, chisels, and carving tools razor-sharp, and with a mirror finish. 20 oz. bar.06L01 ........................................................$22.99

WoodRiver®�Leather�Bench�StropsRemain the traditional honing system for carvers and whittlers because they’re so easy to use. Just prime the leather with the appropriate compound and hone your tool with a lapping “barber’s” stroke. Prime leather stropping surfaces measure 2" x 8", are milled flat, textured to hold the lapping compound and are bonded right up to the edge of a hard maple base. Handled version has leather stropping on both sides for charging with compounds of different grits.18H21 bench strop ..................................$26.9918H33 handled, 2-sided strop ............... $41.99

Sharpening


KOCH�Sharpening�System�AVAILABLE EXCLUSIVELY FROM WOODCRAFT!The Koch System is the finest and fastest carving tool sharpening system in the world. Many sharpening systems claim to make the sharpening process faster and easier but the Koch delivers. This system was designed to eliminate time and frustration associated with sharpening and to this end, we’re continually amazed at how easy it is to use. The unique, “thermal-reactive” properties of the sharpening wheels and paste are what make the Koch Sharpening system different. Within a few seconds the heat generated by pressing the tool against the wheel turns the paste into a liquid that cools and sharpen at the same time. The re-sulting edge has no burr and there was no danger of bluing your tool’s cutting edge. A quick wipe to remove excess sharpening paste and you’re back at work. From the smallest veiner to the largest gouge – putting an edge on a carving tool has never been easier. The Koch�Sharpening�System comes complete with four different colored wheels and two pastes. The red and yellow wheels are mounted on the outside arbor position and are designed to be used with curved tools like gouges. The green and blue wheels are mounted on the inside arbor position and are designed to be used with straight tools. The blue honing paste is formulated for use with the yellow and green wheels to produce a more honed or polished edge. The green sharpening/grinding paste is designed for use on the blue and red wheels and is used for more aggressive sharpening. 1/3 hp, 110V motor with 3' power cord. Some assembly required. Instructions included.150667� Koch Sharpening System ........ $299.99148565� 4" blue wheel ...............................$56.99148566� 4" red wheel .................................$56.99148567� 4" yellow wheel ............................$39.99�148568 4" green wheel .............................$39.99148569� green grinding paste, 2.5 lbs...... $21.99148664� blue sharpening paste, 2.5 lbs .. $21.99

Work�Sharp®�3000The Work Sharp 3000 is an innovative air-cooled, dry sharpening system that’s ready to use – right out of the box. The 3000’s innovative use of solid, tempered, float glass wheels; a “see-through”, slot-ted wheel; high-quality, replaceable abrasive discs and multiple access points enable you to sharpen a wide variety of tools with a precision and delicacy not often found on a powered grinder. Full access to the top surface and an adjustable tool rest permit the grinding, sharpening and honing of large tools while the precision sharpening port provides for ac-curate sharpening of chisels an d plane blades up to 2" wide with one of four preset angles - 20, 25, 30 or 35 degrees. Finally, use of the “see-through” wheel and large port, providing access from under-neath, allows you to sharpen tools from below while monitoring stock removal from above. Comes with

Work�Sharp®�3000�Surface�Conditioning�WheelIf you are re-conditioning an old tool or simply cleaning “gunk” from a new one, Work Sharp’s Surface Conditioning Wheel is just the ticket. The pliable, non woven abrasive pad makes short work of rust, paint and anything else that shouldn’t be there, without damaging your tool! Includes a top knob for securing the wheel to your WS3000.150155 (A) ...................................................$19.95

Work�Sharp®�3000�Felt�Polishing�WheelMedium density felt wheel used for polishing, de-burring and honing edges between sharpenings. Includes a top knob, fine abrasive compound and a wheel storage bag.150156 (B) ...................................................$24.95

A

B

Work�Sharp®�Knife�&�Tool�SharpenerThe Work Sharp hand held, motorized sharpener, sharpens any knife as well as scissors, tin snips, garden shears, lawn mower blades and a host of other tools. Patented Flex-Tek™ belt technology con-forms to the shape of any blade, so the sharpener is easy to use and practically guarantee’s a sharp edge. Includes an 2 guides for outdoor or kitchen knives, coarse, medium and fine grit sharpening belts, instruction booklet and instructional DVD. Replacement belt kit (A) contains 6 belts, two of each grit. 151170 sharpener .....................................$69.95151171 repl. belt kit (A) ................................ $9.95

Woodcraft's�Sharpening�ServiceWe've put the finest cutting edges on countless numbers of tools throughout the years.

Except for our Swiss Made carving tools, most of our edge tools require sharpening or honing before use. We will expertly sharpen your new tool if you request the service from your order taker when you place your order. This option is also available online and in our stores.

New�&�Used�Edge�Tools. Includes chisels, carving tools, plane blades, micro carving, shavehooks, inshaves, drawknives and turning tools. # of tools to be sharpened 1–4 5–8 9+

98X91� new tools ........ $4.99 $4.50 $3.9998X82� used tools ....... $5.99 $5.39 $4.79

2-year manufacturer’s warranty, 2 tempered float glass wheels, a “see through” slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. 110V, 1/5 HP motor, 580 rpm (gear reduced), 16 lbs. 148124� Work Sharp 3000 .....................$199.99148125� leather hone ...............................$29.99148126� tempered glass wheel ................$19.99148127� slotted wheel ..............................$19.99Abrasive�Kit,�Coarse ............................................... includes P80 (2), P120 (2), P220 (3), P400 (2) .....148128�� .....................................................$14.99Abrasive�Kit,�Fine .................................................... includes P400 (4), P1000 (6), 2"x2" P400 (2) ....... 148129� .....................................................$14.99Abrasive�Kit,�Hone .................................................. incl. 3600 MicroMesh (1), 6000 Micro-Mesh (1) ...148130� .....................................................$14.99Abrasive�Kit,�Slotted ...................................includes P80 (1), P400 (2), P1200 (2), 6000 Micro-Mesh (1) 148131� .....................................................$14.99

Work�Sharp®�3000�Wide�Blade�AttachmentIf you own a Work Sharp 3 0 0 0 , y o u need this at-tachment–it’s that good. Us-ing it you can grind, sharpen, and hone most plane or chisel blades up to 3" wide. It works in conjunction with the 3000’s glass plate and utilizes the entire available abrasive surface, which you can’t do when using the chisel port. We found this attachment so effective that now we only use the port for coarse grinding. The attachment has three main components: a plate which attaches to the back of the 3000; a guide which holds the blade and rides on the plate; and a bevel setter. It’s easy to set up, and even easier (if that’s possible) to use. Plus, it makes micro bevels a snap to do. 149512 ........................................................$69.99

Work�Sharp®�3000�Knife�SharpenerEasily sharpen all your kitchen knives, hunting knives and scissors on your Work Sharp 3000 with their new Knife Sharpener. It’s quick and economical. The Sharpener is comprised of a drive wheel, blade guide and 3 (coarse, medium and honing) long lasting abrasive belts. It’s easy to set up, use and puts an edge on knife or scissors in short order. Replacement belt kit contains one belt of each grit.151270 Work Sharp 3000 Sharpener .......$59.99151271 belt kit ............................................$12.99

DMT�Magna-DiscTM�System�For�The�Work�Sharp®Diamond are the hardest, most durable substance known to man. Now, thanks to DMT, diamond sharp-ening capability is available for the Work Sharp 3000 through two kits that work with the Worksharp's glass plate. The Sharpening Kit consisting of 2 diamond discs (325 and 600 grit) and a mounting disc. The Honing Kit consists of 1 diamond disc (1200 grit), 2 grams of 8000 grit diamond paste, a buffing disc (to use with the paste) and a mounting disc.150669�(A)�Sharpening Kit .........................$94.99150668 (B) Honing Kit................................. $74.99151172 5 grams diamond paste ...............$24.99

A BA

Sharpening


Sharp�Skate�II�with�DockSide to side sharpening isn’t new, but it certainly isn’t main stream either. Traditional sharpening employs a front to back, or an into/away, motion while side sharpening requires movement of the tool from side to side. Why side sharpen? Many believe this method is faster and produces a sharper tool. The Sharp Skate is a side sharpening jig that removes the guess work and helps you master the side sharpening process. The Dock sets the bevel and if you’re using one, the secondary angle or bevel. The Skate and Dock are quick and easy to set up and will produce consistent, spectacular results. USA.150926 ......................................................$189.99��

Chisel�&�Plane�Blade�Sharpening�Guide�Sets�Up�Easily�&�Folds�Compactly! The adjusting knob determines the bend in the guide’s body and the angle of sharpening at the tool’s front edge. Angles can be set with the printed scale, a protrac-tor or by eye. Spring tensioned clamp holds tools up to 25/8" wide. Two-wheeled rear roller moves in a straight line during use and will not wander sideways like other guides. Lightweight sharpener is made of high-impact Lexan.03E42 .......................................................$29.99

Oar�SharpenerThe Oar Sharpener is the perfect jig to use when sharpening all sizes and shapes of gouges, v-tools, and chisels. The jig holds and guides a woodcarving tool at a constant angle while sharpening on a bench stone. It also works with bench chisels up to 11/2" wide. Made of machined aluminum, includes detailed instructions. The Oar Sharpener makes sharpening tools that would otherwise be a challenge, a breeze.142390 .......................................................$34.99

Complete�Beginner's�Woodcarving�KitContains everything you need to get started, all conveniently stored in a durable canvas tool roll. John Hillyer presents 20 projects in his book Woodcarv-ing. The projects tend to increase in complexity as the book goes along, but the color photos covering the steps involved are clear and well thought out, as are the step-by-step directions. You may select a different favorite, but the roly-poly Santa and the carved egg were ours. Possible preferences include swimming dolphins, sitting Scotty dog, a love spoon, or a stretching cat. Kit contains all the necessary tools to complete the projects: both roughing and detail replaceable blade knives; 5/16" #8 fishtail gouge; 9/64" #8 gouge; 9/64" bent 90° V tool; 3/8" double bevel straight chisel; 3/8" bent chisel, 3/8" double bevel skew chisel; teardrop shaped slip stone; 4 oz. bottle of sharpening oil; a snap close canvas tool roll with individual pouches to protect your tools, accessories and book.140434 ................................................... $124.99

Whittling�KitWhether you’re a beginner look-ing for detailed directions, or an advanced carver looking for a simple way to relax, you’ll find what you need in our Whittling Kit. With The Little Book of Whittling, our 2-blade carving knife, and a couple of thumb guards you’ll be ready to kick back and start making chips.146793 .........................$31.99

Carver’s�Soft�Head�MalletsDeliver a lifetime of use and accept a lifetime of abuse! The resilient urethane heads of these carver’s mallets are almost indestructible, and produce an exceptional, longer-lasting impact force. The anti-shock cushion, load-spreading effect of the urethane head is ideal for woodworkers who suffer from arthritic elbows. We guarantee they won’t crack or split. Overall length approximately 101/2", with hardwood handles. Weight Head Diameter13T41� 12 oz. ............... 23/4" ....................$34.99141039 16 oz. ............... 23/4" ....................$38.9913T51 20 oz. ............... 31/2" ....................$39.99

Deluxe�Canvas�Tool�RollsHeavy canvas rolls are stitched to hold 9, 15 or 25 carving tools or chisels. The edges of the rolls are sewn with cotton banding to prevent fraying. Rolls feature a large end flap with cotton tie that firmly closes the roll to prevent your tools from slipping out. For tools under 12" in length.02L11 9-pocket roll .....................................$24.9909L11 15-pocket roll ...................................$29.9909L21 25-pocket roll ...................................$32.99

Chip� Carver’s� Tool� Roll� has 11 pockets for tools up to 8" in length. Top flap completely covers tools when closed to prevent edges from rubbing together. Single row of pockets makes tool selection easier. Holds miniature turning tool sets, too! Not illustrated.02X41 ........................................................$20.99

Honing�Guide�Speeds�SharpeningYou can hone edge tools between grindings with this unique self-centering guide. Chisels and plane irons from 1/16" to 25/8" wide can be held securely in one of the two sets of stepped jaws. The accurately ground hardened steel roller glides across the surface of the stone to allow for a consistently fine edge. 03A21 ..................................................... $12.99

BA

C

Wheel�Dressers�(A)� Wheel� Dresser.� Removes glazed grinding surfaces and reshapes wheels safely and quickly. Heavy-duty cast-iron handle with replaceable cutters.03A11 .......................................................$20.9903A12 replacement cutters ........................$7.99

(B)�Dressing�Stick. Recommended for reshaping all types of abrasive wheels, even rubberized abrasives and water stones. This silicon carbide dressing stick is 1" x 1" x 6".11N51�� ........................................................$10.99

(C)�Diamond�Tip�Wheel�DresserThe�Fastest�And�Easiest�Way�To�Dress�A�Grinding�Wheel! Avoid all of the inaccuracies and difficulties of single point dressing tools! This nickel plated dresser has long-lasting, 36 grit diamond “chips” for fast resurfacing or shaping. Unlike single-point dressing tools, it has a dressing surface area that is 1/2" wide and 13/4" long. Uniform reconditioning your wheels is as simple as placing the dresser on your tool rest and contacting the wheel. No more frustration from futile attempts of trying to accurately guide a single point, diamond tip across the face of your wheel. Overall length 45/8".124670 ......................................................$14.99

MagnifyingLampBrings light and mag-nification precisely where you need it while relieving eye strain. 33/4" diameter 3-diopter (3X) glass lens with incandes-cent 60 -watt fixture is mounted on a spring-balanced arm with a reach of 36". Mounting bracket clamps to shelf or workbench edge. 60-watt bulb not included.09L05 ........................................................$30.99

Carving


BrienzCarving�MalletsThese ex -traordinarily high-quality, hand crafted mallets are made fo r Woodcraft by the manufacturer supplying the prestigious Brienz Woodcarving School in Brienz, Switzerland. Used by master carvers and apprentices throughout the world, these lacquered straight grain beech mallets fit comfortably in the hand and give you great control. Weight and dimensions may vary slightly. Weight Diameter Length Ounces08G08 81/2............ 23/4" .......... 10" ......$59.9908G09 141/2........... 31/8" ........ 113/4" ....$60.9908G10 231/2 .............4" ............ 13" ......$62.99

91

Old�Time�Whittling�KitWith Keith Randich’s book and a few essential tools, this beginner's kit has everything you need to learn the basics of whittling. Includes Old Time Whittling, a Bütz carving knife, leather bench strop and compound for keeping the knife sharp, two thumb guards for added safety, and a 2" x 2" x 12" piece of kiln-dried basswood. Happy Whittling!10A90 Save Over $9! ...................................................................$64.99Old Time Whittling, An Introductory Text by Keith Randich. Learn the basics while creating an egg, an old boot, a ball-in-the-cage, a wooden chain, a ball-in-a-ball, an arrow through the heart, and more with this easy-to-follow text. Ten projects with concise instructions and 50+ photographs and diagrams. 60 pgs., softcover.10A85 ..........................................................................................$11.99

Power�Grip�Carving�ToolsThe handle shape and short blade length of these unique carving tools make them the perfect “gap fillers” between conventional palm-handled and full-sized carving tools. The 41/2" handles are designed to be held like a pencil for precise control. When more force is needed place the flared handle end in the palm of your hand. 11/4" laminated steel blades. Includes storage box.

Five-Piece�Power�Grip�Set contains a 3mm (1/8") #9 gouge, 6mm (1/4") #8 gouge, 7.5mm (5/16") skew chisel, 7.5mm (5/16") straight chisel, and 4.5mm (3/16") V-parting tool.18C41 ................................................... $42.50

Seven-Piece�Power�Grip�Set contains the tools in five-piece set above plus a 9mm (3/8") #5 gouge and a 9mm (3/8") #3 gouge.18C42 ................................................... $51.99

PFEIL

Swiss�Made�Full-Size�Starter�SetThis is an ideal selection for the beginning carver who wants a basic set of full-sized but commonly used tools. Everything you need to get started is here, including a heavy-duty, fitted tool roll to hold and protect your tools. Set includes: 12mm No. 1 single-bevel straight chisel; 12mm No. 1 skew cut double-bevel chisel; 12mm No. 5 gouge; 20mm No. 4 gouge; 10mm No. 7 gouge; 4mm No. 9 gouge; 8mm No. 12 V-parting; #12 chip carving knife.05E50 ................................................. $254.99

pfeil®

Chip�Carving�KnivesAlthough designed for chip carving, these knives are used by whittlers and cabinetmakers as spe-cial purpose and general bench knives. Hardwood handles are designed to match the blade style and assure tool control. Overall lengths range between 5" and 7". Rc 57-60 hardness. Honing required before use.15U60 set of 5* Save Over $17! ............ $74.9915U20 set of 10 Save Over $59! ..............$119.99

A

B

C

D

E

F

G

H

I

J

15U21 A ...................................................... $18.5015U31 B.......................................................$17.5015U61 C ...................................................... $19.9915U92 D ..................................................... $15.5015U11 E ...................................................... $15.5015U71 F* ....................................................$20.9915U51 G* ................................................... $16.5015U41 H* ................................................... $19.9915U81 I* ..................................................... $18.9915U91 J* .................................................... $16.50

RAMELSON�Palm-Handled�Carving�SetThe overall design of the tool keeps your fingers close to the cutting edge and the comfortable half-round palm-style handles feature a flat spot that keeps them from rolling off your bench. Set A contains smaller cutting profiles for more intricate work. Set B contains slightly larger profiles for quicker stock removal and shaping. Overall length of the tools is 43/4". Factory sharpened and ready for use.09H01 1/4" skew chisel ................................ $9.9909H02 1/8" veiner ......................................... $9.9909H03 1/8" v-parting ..................................... $9.9909H04 1/4" #5 gouge ................................... $9.99

09H05 3/16" #5 gouge .................................. $9.9909H06 1/8" #3 gouge ................................... $9.9909H10 set of 6 tools above (A) .................$49.99

09I01 3/8" chisel double bevel ............... $18.9909I02 3/8" #3 fishtail gouge ....................$19.5009I03 3/8" #5 fishtail gouge ....................$20.9909I04 3/8" #7 fishtail gouge ....................$20.9909I05 3/16" #9 fishtail gouge ...................$20.9909I06 3/8" #9 fishtail gouge ....................$20.9909I10 set of 6 tools above (B) .............$104.99

09I20 set of 12 Save Over $61! .........$119.99

A B

Carving


Square�tang�in�handle�prevents�twisting

Marked�for�easy�identificationFull�bolster�

distributes�pressure�to�handleInternal�

steel�ferrule�under�bolster�prevents�handle�splitting

Special�alloy�chrome-vanadium�steel�is�renowned�for�its�long�cutting�life

Tools�are�smooth�and�polished�and�hardened�to�end�of�profile

Durable�octagonal�shape�hardwood�handles�from�eco-logically�managed�Swiss�forests

1st�digit�is�profile/sweep,�second�digit�is�width�of�cutting�edge

Width(mm)

Hand-sharpened�cutting�edge,�inside�sweeps�finely�ground�and�polished

pfeil® PFEIL Swiss�Made��Carving�Tools�We are pleased to be the exclusive United States distributor of Swiss made tools. For over 45 years we have offered our customers carving tools that we believe are the finest in the world. These tools are made with a dedication to quality unsurpassed in today’s high-tech world. Each highly polished blade starts with the best alloy tool steel that is forged and finished to provide a proper balance

of strength and weight. Blades are electronically hardened to exacting tolerances and tempered to Rc 59-61 to create a durable, resilient cutting edge that stays sharp longer. Each tool has an octagonal, European hardwood handle finished with solvent-free vegetable oil. Overall lengths range from 91/2" to 11" with blade lengths of 31/2" to 4". Swiss made tools shave wood smoother and more precisely than any other carving tool. For more info, visit woodcraft.com!

Unfortunately, when tools are crafted to the high standards of our Swiss line, demand often exceeds supply. We make every effort to keep all sizes and styles (over 500) in stock at all times. Sometimes

we’re out of stock on a particular item because of the limited number of tools our Swiss manufacturer can make.

Many customers find that more than one size and style meets their carving needs. If you can accept a substitute tool, simply list your alternatives when ordering. We recommend you place your Swiss tool orders by using our toll-free number so availability can be confirmed and if necessary a substitute selected.

But if you prefer to place a tool on back order, we’ll keep you informed of the status of your order. When stock is received, we will fill your order immediately.

92

GOUGESGOUGESGouges are forged in various sweeps to remove greater or lesser amounts of wood. For example, roughing out the background for a large relief panel would require a tool such as a 9 sweep. The ridges and hollows formed by this tool would then be leveled with a 2 or 3 sweep gouge. See Sweep Diagrams for tool profiles.

#5�Sweep�Gouges05E12 2mm .......................$29.5005W65 3mm .......................$29.5005D03 5mm .......................$29.9905D04 8mm .......................$29.9905E35 10mm .....................$30.99 05D05 12mm .....................$32.5005E36 14mm .....................$34.99�05D06 16mm .....................$34.9905E39 18mm .....................$34.9905D07 20mm .....................$39.9905F28 22mm .....................$39.9905D08 25mm .....................$39.9905D09 30mm .....................$49.5005D10 35mm .....................$49.9905F18 40mm.....................$56.9905G22 60mm .....................$98.99

#1�Sweep�Gouges05G12 60mm ..................... $87.9905X24 80mm...................$109.99

#�3�Sweep�Gouges05E11 2mm ........................ $27.9905C03 3mm........................$28.9905C05 5mm........................$30.9905C06 8mm .......................$30.9905E33 10mm .................... $33.9905C07 12mm .....................$33.9905E34 14mm ....................$34.9905C08 16mm .....................$34.9905E38 18mm .....................$34.9905C09 20mm .....................$34.9905F27 22mm .....................$35.9905C10 25mm .....................$38.9905C11 30mm .....................$48.5005D02 35mm .....................$51.9905F17 40mm.....................$54.99

#�2�Sweep�Gouges05B04 2mm .......................$28.9905W21 3mm .......................$28.9905B06 5mm .......................$30.9905B07 8mm .......................$30.9905E31 10mm .....................$32.99 05B08 12mm .....................$32.9905E32 14mm .....................$34.5005B09 16mm .....................$34.5005E37 18mm .....................$34.5005B10 20mm .....................$38.9905F26 22mm .....................$38.9905B11 25mm .....................$38.9905C02 30mm .....................$45.9905C04 35mm .....................$48.5005F16 40mm.....................$52.9905G21 60mm .....................$98.99

#�4�Sweep�Gouge05B17 2mm ........................$27.9905B18 3mm ........................$27.9905B19� 5mm ........................$27.9905B20 8mm ........................$27.9905B21 10mm ..................... $29.9905B22 12mm ..................... $29.9905B23 14mm ..................... $29.9905B24 16mm ..................... $29.9905B25 18mm ..................... $34.9905D11� 20mm ..................... $38.9905B26 22mm ..................... $38.9905B27 25mm ..................... $39.9905B28 30mm ..................... $46.9905B29 35mm ..................... $48.9905B30 40mm ..................... $56.99

Carving


GOUGESGOUGES

#�6�Sweep�Gouges05B31 2mm ........................$27.9905B32 3mm ........................$27.9905B33 5mm ........................$27.9905B34 8mm ........................$27.9905B35 10mm ..................... $30.9905B36 12mm ..................... $30.9905B37 14mm ..................... $30.9905B38 16mm ..................... $35.9905B39 18mm ..................... $35.9905B40 20mm ..................... $39.9905B41 22mm ..................... $39.9905B42 25mm ..................... $39.9905B43 30mm ..................... $50.9905B44 35mm ..................... $54.9905B45 40mm ..................... $68.99

#�8�Sweep�Gouges05F01 2mm .......................$29.9905X61 3mm .......................$30.9905F02 4mm .......................$30.9905F03 7mm ........................$30.9905F04 10mm .....................$32.9905F05 13mm .....................$32.9905F06 16mm .....................$36.9905F07 18mm .....................$38.5005E14 20mm .....................$40.9905F30 22mm .....................$40.9905F09 25mm .....................$40.9905F11 30mm .....................$53.9905F12 35mm .....................$54.9905F20 40mm.....................$59.99

#3�Sweep�Spoon�Gouges05W55 3mm .......................$28.9905K01 5mm .......................$28.9905K02 8mm .......................$32.9905K03 12mm .....................$32.9905W61 16mm .....................$32.9905K04 20mm .....................$36.9905K20 25mm .....................$40.9905F52 30mm .....................$46.99

#5�Sweep�Spoon�Gouges05W71 3mm .......................$29.9905K05 5mm .......................$30.99�05K06 8mm .......................$30.9905W75 12mm .....................$33.9905K07 16mm .....................$33.9905K08 20mm .....................$33.99�05W81 25mm .....................$41.9905F53 30mm .....................$46.99

Shaped similar to an everyday table spoon and most useful in sections where a long straight blade would be impractical because of detail or size of the work. Sweep numbers heading each style refer to the same numbers in the standard tool listing. See Sweep Diagrams for tool profiles.

#7�Sweep�Spoon�Gouges05W85 4mm .......................$26.9905K09 6mm .......................$29.9905F54 8mm .......................$29.9905K10 10mm .....................$31.9905K11 14mm ..................... $37.99O5L01 18mm .....................$38.9905F56 20mm .....................$40.9905W95 25mm .....................$42.9905X51 30mm .....................$49.99

#8�Sweep�Spoon�Gouges05X65 3mm .......................$26.9905L02 4mm .......................$26.9905L03 7mm ........................$29.5005L04 10mm .....................$29.5005X71 13mm .....................$32.9905L05 16mm .....................$33.5005X75 18mm .....................$35.9905F57 20mm ..................... $37.9905X81 25mm .....................$39.9905F58 30mm .....................$46.99

#9�Sweep�Gouges05E41 1mm .......................$26.99 05G03 2mm .......................$26.9905G04 3mm .......................$28.9905D12 4mm .......................$28.9905G05 5mm .......................$28.9905G06 7mm ........................$29.9905G07 10mm .....................$31.9905T31 13mm .....................$31.9905G08 15mm .....................$33.9905F32 18mm .....................$34.9905G02 20mm .....................$34.9905F31 22mm .....................$38.9905G09 25mm .....................$41.9905G10 30mm .....................$43.9905G11 35mm .....................$55.9905F21 40mm.....................$59.9905G13 50mm ...................$124.99

SPOON GOUGESSPOON GOUGES

#�7�Sweep�Gouges05E13 2mm .......................$30.9905E01 4mm ....................... $27.9905E02 6mm .......................$30.9905E40 8mm ......................$31.99�05E03 10mm .....................$33.9905E42 12mm ....................$33.99 05E04 14mm .....................$34.9905E43 16mm ....................$35.9905E05 18mm .....................$38.9905W91 20mm .....................$40.5005F29 22mm .....................$40.5005E07 25mm .....................$44.9905E08 30mm .....................$49.5005E10 35mm .....................$54.9905F19 40mm.....................$63.9905G23 60mm .....................$99.99

Carving


FISHTAIL GOUGESFISHTAIL GOUGESA very useful tool for cleaning out corners and undercutting, particularly when side clearance is limited. See Sweep Diagrams for tool profiles.

#1�Sweep�Fishtail�Gouges05V45 6mm .......................$29.9905M23 8mm .......................$30.9905V51 12mm .....................$30.9905M24 14mm .....................$36.9905V55 16mm .....................$39.9905M25 20mm ....................$34.9905F85 25mm.....................$39.99

#3�Sweep�Fishtail�Gouges05M26 6mm ....................... $37.9905M04 8mm ....................... $37.99 05M05 12mm ..................... $37.9905M06 14mm .................... $38.9905M27 16mm .....................$44.9905M12 20mm .................... $47.9905F86 25mm.....................$53.99

#5�Sweep�Fishtail�Gouges05M15 6mm .......................$33.9905M07 8mm .......................$35.9905M08 12mm .....................$36.9905M09 14mm .....................$40.9905M16 16mm .................... $46.50�05M13 20mm ....................$49.9905F87 25mm.....................$49.99

#7�Sweep�Fishtail�Gouges05M17 6mm ...................... $32.5005M10 8mm .......................$34.9905M11 10mm.....................$34.9905N01 14mm .....................$39.9905M18 16mm .....................$42.9905M14 20mm ................... $48.5005F88 25mm.................... $48.50

#9�Sweep�Fishtail�Gouges05M19 5mm .......................$36.9905M20 10mm.....................$36.9905M21 15mm.....................$43.9905M22 20mm ....................$43.99

Forged in the same sweep as the standard No. 5, 7 and 8 gouges with an additional lengthwise bend in the blade. This is necessary for roughing out and smoothing concave sections on sculpture and in bowls. See Sweep Diagrams for tool profiles.

#7�Sweep�Bent�Gouges05F42 4mm .......................$34.9905J16 6mm .......................$34.9905X55 10mm ..................... $37.9905S09 14mm .....................$40.9905F43 18mm .....................$40.9905N03 20mm .....................$44.9905N04 25mm .....................$49.9905N05 30mm .....................$59.9905N06 35mm .....................$59.99

#8�Sweep�Bent�Gouges05J17 4mm ...................... $38.9905J18 7mm ....................... $38.9905X85 10mm .....................$39.9905X91 13mm .....................$39.9905F44 16mm .....................$40.9905R03 18mm .....................$42.9905F45 20mm .....................$44.9905R04 25mm .....................$44.9905R05 30mm .....................$56.9905R06 35mm .....................$59.99

#5�Sweep�Bent�Gouges05J15 5mm .......................$32.9905S07 8mm .......................$34.9905N07 12mm .....................$35.9905N08 16mm .................... $38.9905S08 20mm .....................$42.9905F39 25mm .....................$44.9905F40 30mm .....................$51.9905F41 35mm .................... $58.99

BENT GOUGESBENT GOUGES

These gouges are made especially for completing professional detail work. They combine the spoon curvature, so helpful in accessing tight spots in detail carving, with the point of a skew, so you can reach deep, detailed corners. The skew element also makes these tools shear through grain with ease. See Sweep Diagrams for tool profiles.

#2�Skewed�Spoon�Gouges05L12 1mm left ............... $28.9905L13 1mm right ............. $28.9905L14 2mm left ............... $28.9905L15 2mm right ............. $28.99

05L16 3mm left ............... $29.9905L17 3mm right ............. $29.9905L18 5mm left ............... $29.9905L19 5mm right ............. $29.9905O10 8mm left ............... $34.9905O11 8mm right ............. $34.9905O12 12mm left ............. $34.9905O13 12mm right ........... $34.9905L20 16mm left ............. $34.9905L21 16mm right ........... $30.9905L22 20mm left ............. $34.9905L23 20mm right ............$37.9905L24 25mm left ............. $39.9905L25 25mm right ........... $39.99

SPOON GOUGESSPOON GOUGES

#9�Sweep�Spoon�Gouges05F55 2mm .......................$28.5005X95 3mm .......................$29.5005L06 5mm .......................$30.5005L07 7mm ........................$30.5005L08 10mm .....................$30.5005T35 13mm .....................$30.5005L09 15mm ..................... $37.9905K18 20mm .....................$38.99

#11�Sweep�Spoon�Gouges05F59 1mm .......................$44.9905L10 2mm .......................$32.9905L11 3mm .......................$32.9905T55 4mm .......................$32.9905M01 5mm .......................$36.9905M03 7mm ........................$38.9905T71 10mm .....................$38.99

SKEWED SPOON GOUGESSKEWED SPOON GOUGES

Carving


Crafted to the s ame h ig h standards as the rest of our Swiss l ine, t he s e new h e a v y - d u t y gouges are the perfect tools for roughing out large work or quick removal of waste stock. Hard-

wood handles feature double steel ferrules to prevent splitting. Overall length approximately 111/2", blade length approx. 51/2".05G12 #1 60mm ............... $87.9905X24� #1 80mm .............$109.9905G21 #2 60mm* .............$98.9905G22 #5 60mm* .............$98.9905G23 #7 60mm* .............$99.9905G13 #9 50mm .............$124.9905G24 *set of 3 Save $32! ........... ............................. $264.99

HEAVY-DUTY GOUGESHEAVY-DUTY GOUGES

#17�Sweep�Stähli�V-Parting�ToolsNamed for its designer, Brienz Wood-carving School master woodcarver, Mr. Stähli. Because of the slight cur-vature of its “V” (lightly concaved) profile this tool can function as a No. 2 gouge or as a “concaved” V-Parting tool. Great for outlining and rounding over edges at the same time.05H20 3mm .......................$36.9905H21 6mm .......................$42.5005H22 20mm ..................... $71.99

The long bend forged into this part-ing tool allows the carver to make roughing or detailing cuts on concave surfaces.

#12��Long�Bent�V-Parting�Tools

05F46 2mm .......................$36.9905J19 3mm .......................$38.9905F47 4mm .......................$38.9905T01 6mm .......................$38.9905F48 8mm .......................$42.9905T02 10mm .....................$42.9905F49 12mm .....................$49.9905J20 14mm .....................$49.99

LONG BENT V-TOOLSLONG BENT V-TOOLS

CHISELSCHISELS

#1�Sweep�Skew-Cut�Chisel Double Single Bevel Bevel05V75 2mm .... 05A13 ...... $27.9905V85 3mm .... 05A18� .....$28.9905A09 5mm .....05A17 ......$30.9905A10 8mm .... 05A21......$30.9905E17 10mm ...05E18......$32.99 05A11 12mm .. 05A23......$32.9905E21 14mm ...05E22......$33.50 05B02 16mm ...05V01......$32.9905E26 18mm ...05E25......$34.99�05V95 20mm ...05V03...... $37.9905F24 22mm ...05F23...... $37.9905B03 25mm .. 05V05......$42.9905S06 30mm ...05V07......$48.9905B05 35mm ...05V09......$54.9905E30 40mm...05E29......$56.99

Carving chisels have two basic grinding styles, single or double bevel, and two profiles, skewed or straight. Double-beveled grinds are ground with two rounded heels. This allows for the rocking motion so necessary in controlling depth of cut. Single-bevel grinds are ideal for paring and delicate detailing. See Sweep Diagrams for tool profiles.

#1�Sweep�Straight�Chisel Double Single Bevel Bevel 05A01 2mm ..... 05A12..... $28.9905V81 3mm ..... 05A15 ..... $30.9905A02 5mm ..... 05A16 .....$32.9905A03 8mm ..... 05A19 .....$34.5005E15 10mm ....05E16..... $34.5005A04� 12mm ... 05A22 .....$35.5005E19 14mm ....05E20..... $33.99 05A05 16mm ... 05A24..... $35.5005E23 18mm ....05E24..... $35.50�05V91 20mm ....05V02 ..... $39.9905F22 22mm ....05F25..... $39.9905A06 25mm ....05V04..... $41.9905S05 30mm ....05V06..... $49.9905A08 35mm ....05V08..... $49.9905E27 40mm....05E28......$57.99

PFEIL�Swiss�MadeAbegglen�Detail�KnivesThese unique detail knives are a resurrection of a lost, or little known, antique carving tool. Named after a Swiss family, these knives feature dual convex and concave edges that converge to a single point. The 4" shaft and smaller handle means you’ll be able to carve into hard to reach areas. Like all Swiss made tools, these follow pfeil’s legendary quality formula of a

special grade of hardened chrome vanadium steel that is ground and polished to a razor sharp edge. Ap-proximate blade width is 3/8" for the small, 1/2" medium, 3/4" large. Overall length is approximately 71/2". Natural oil finished octagonal Acacia handle.05B49 large .......................$41.9905B50 medium ..................$41.9905B51 small .......................$41.99

Octagonal�Replacement�Handles�The traditional octagonal shape of these handles provides a positive grip for controlling cuts in woodcarving and because of the flats, they do not roll. Made of unfinished European hardwood. 53/8" long, handling instructions included. A B05X01 9/16" 3/4" .................................................................................. $8.9905X02 5/8" 7/8" .................................................................................. $8.9905X03 11/16" 15/16" ................................................................................ $8.9905X04 13/16" 11/16" ................................................................................ $8.99

B A

pfeil®

Carving


VEINERSVEINERSThese gouges are more "U"-shaped than any other sweep. They are well-suited to fluting and preliminary outlining of relief carvings. Their shape allows them to make a clean, deep cut in one pass without fear of the corners of the tool digging in. See Sweep Diagrams for tool profiles.

#11�Sweep�Veiners123012 .5mm ......................$29.9905I05� 1mm .......................$29.9905I13 1.5mm ....................$30.9905I06 2mm .......................$30.9905I07 3mm .......................$32.9905T51 4mm .......................$35.9905I08 5mm .......................$35.9905I09 7mm .......................$35.9905I10 10mm .................... $37.9905F33 12mm ....................$39.9905I11 15mm ....................$40.9905J01 18mm ....................$40.9905F64 20mm ....................$43.9905J02 25mm .....................$45.9905J03 30mm .....................$54.99

FLUTERONI GOUGESFLUTERONI GOUGESWith three working edges, only the sides are forged at a slight angle to the bottom creat-ing a small radius on each side of the cutting edge. Functions as both a flat sweep and deep sweep gouge.

#24�Sweep�Fluteroni�Gouges

05F96 4mm .......................$35.9905F13 6mm .......................$36.9905F14 8mm .......................$43.9905F15 12mm .....................$46.99

With the curve reversed so the cutting edge is convex instead of concave. Used for carving or cleaning out the underside of a carving or cut. For get-ting a clean cut where top clearance is restricted. A specialized carving tool, but very useful. See Sweep Diagrams for tool profiles.

#20�Sweep�Back�Bent�Gouges

05F70 6mm .......................$34.9905F71 10mm.....................$35.9905F72 13mm.....................$35.9905F77 20mm ....................$36.9905F81 25mm.....................$40.9905F82 30mm ....................$44.99


05J12 2mm .......................$34.99123010 3mm .......................$34.9905J08 6mm .......................$36.9905J09 10mm .....................$39.9905J10 13mm .....................$39.9905J11 20mm .....................$39.9905J13 25mm .....................$42.9905J14 30mm .....................$43.99


05R07 6mm .......................$36.9905R08 10mm ..................... $37.99

A multi-purpose tool with three work-ing edges, sides forged obliquely to the bottom edge, and ground with an outside bevel. Functions as a chisel and V-parting tool making it possible to follow sweeping inside and outside curves and to remove shallow back-grounds in relief carving.

#23�Sweep�Macaroni�Tools05F95 4mm .......................$36.9905G25 6mm .......................$36.99

MACARONI TOOLSMACARONI TOOLS

05P02 8mm .......................$45.9905P03 12mm .....................$50.99

Similar to part-ing tools at the cutting edge, but formed with a short length-wise bend, like spoon gouges. Use where straight shank standard tools would be awkward.

#12�Sweep�Bent�V-Parting�Tools

05F60 1mm .......................$29.9905I02 3mm .......................$31.9905F61 6mm .......................$31.9905I04 8mm .......................$36.99

BACK BENT GOUGESBACK BENT GOUGES

Forged and precision ground with straight sides and vee-bottom edge. Principal uses include outlining, rounding over edges with the straight side, adding detail, textures to back-grounds, undercutting, and applying decoration in chip carving. See Sweep Diagrams for tool profiles.

#16�Sweep�V-Parting�Tools05E45 1mm .......................$36.99�05H18 3mm .......................$38.9905H19 6mm .......................$42.9905F38 8mm .......................$42.99

#14�Sweep�V-Parting�Tools05F36 2mm .......................$32.9905H16 4mm .......................$36.9905H17 6mm .......................$36.9905H06 8mm .......................$44.9905H07 10mm ..................... $47.9905H08 12mm .....................$48.9905F50 14mm .....................$50.9905H11 20mm ..................... $70.99

#13�Sweep�V-Parting�Tools05T91 1mm .......................$31.9905T95 2mm .......................$31.9905H03 3mm .......................$32.9905V41 4mm .......................$32.9905H04 6mm .......................$36.9905T61 8mm ....................... $37.9905H05 10mm .....................$38.9905F35 12mm .....................$40.9905H09 14mm .....................$45.9905H15 20mm .....................$66.9905H12 30mm .....................$84.99

#12�Sweep�V-Parting�Tools05J04 1mm .......................$30.9905T75 2mm .......................$32.9905J05 3mm .......................$32.9905T81 4mm .......................$33.9905J06 6mm .......................$34.99��05T85 8mm .......................$34.9905J07 10mm .....................$39.9905F34 12mm .....................$42.9905H14 14mm .....................$44.9905I12 20mm .....................$64.99

#15�Sweep�V-Parting�Tools05E44 1mm .......................$32.99�05P07 3mm ....................... $37.5005P08 6mm ....................... $37.5005F37 8mm .......................$38.99

V-PARTING TOOLSV-PARTING TOOLS

BENT V-TOOLSBENT V-TOOLS

Carving


Set�of�7�Intermediate�Tools.�Contains profiles not available in the sets described above.05Q20 set of 7 tools***Save Over $67! $134.99#11D

05Q08 1mm No. 11 veiner ** ............... $29.9905Q09 3mm No. 11 veiner * ................. $29.99

6-Piece� Intermediate� Sets. Due to customer demand, the 12-pc. set above has been broken down into two 6-pc. sets. Sets include those tools marked as shown.05H02 set of 6 tools* Save Over $34! . $129.9905H10 set of 6 tools** Save Over $32! $129.99

#7D

05Q13 4mm No. 7 gouge *** ............... $28.5005E63 6mm No. 7 gouge ....................... $28.5005E64 10mm No. 7 gouge..................... $28.5005Q14 14mm No. 7 gouge *** ............. $28.99

05E65 4mm No. 8 gouge ...................... $26.9905Q05 7mm No. 8 gouge ** ..................$27.9905Q18 10mm No. 8 gouge *** ............ $29.50

#8D

#5DA #8DA

05E69 8mm No. 5 spoon gouge ........... $28.9905Q10 7mm No. 8 spoon gouge * ........ $29.50

#2D

05E59 5mm No. 2 gouge ...................... $26.9905E60 8mm No. 2 gouge .......................$27.9905Q17 12mm No. 2 gouge *** ............. $29.99

#3D

05E61 5mm No. 3 gouge .......................$27.9905E62 8mm No. 3 gouge .......................$27.9905E67 12mm No. 3 gouge .....................$27.99

#5D

05Q03 3mm No. 5 gouge ** ................. $25.9905Q04 8mm No. 5 gouge * ....................$27.9905Q16 12mm No. 5 gouge ***............. $29.50

#1S

05Q01 8mm No. 1 double bvl straight* $21.9905Q02 8mm No. 1 double bvl skew **$23.9905E70 12mm No. 1 double bvl straight $27.9905E71 12mm No. 1 double bvl skew ....$27.99

#1D#15

#14D#12D

05R01 2mm No. 12 V-parting ** .......... $26.9905E51 6mm No. 12 V-parting*** ........ $26.9905R02 8mm No. 12 V-parting * ............ $26.9905Q22 6mm No. 14 V-parting ............... $29.9905E68 3mm No. 15 V-parting ............... $29.99

#9D

05E66 2mm No. 9 gouge .......................$27.9905Q06 5mm No. 9 gouge ** ..................$27.9905Q07 10mm No. 9 gouge * ................. $28.99

05Q15 10mm No. 7 bent gouge *** .... $28.99#7DL

PFEIL Swiss�Made�Intermediate�Carving�ToolsSpecially forged for Woodcraft, these intermediate size, professional-style tools are 2" shorter than our regular pfeil Swiss made tools for easier control and greater responsiveness. They are carefully sharpened, honed, and buffed for immediate use. The combination of high-grade tool steel and precise tempering results in an edge that will stay sharp for many enjoyable hours of woodcarving. Beginning carvers will find these delicately balanced tools well-suited to their needs, and experienced carvers often prefer them for getting into confined areas. 8" overall length with 31/2" blades and 41/2" octagonal hardwood handles.

�Intermediate�Carving�SetsComplete set includes tools marked (*) and (**) in hardwood stand and includes 08GO8 81/2 ounce Brienz carving mallet; 08Y22 and 08Y32 hard and soft Arkansas stones; and 09L11 15-pocket tool roll.

The twelve profiles are among the most basic and useful in woodcarving: 8mm chisel; 8mm skew; 3mm and 8mm No. 5 gouges; 7mm No. 8 gouge; 5mm and 10mm No. 9 gouges; 1mm and 3mm vein-ers; 7mm No. 8 spoon gouge; plus 2mm and 8mm No. 12 V-parting tools. Includes tool rack shown above.05B59 (A) set of 12 tools ......................... $249.9913D15 complete set ................................ $329.99

Similar to V-Parting tools except for the curvature of each side of the vee. This curve softens work by rounding the top of the carved edge. Used for outlining and adding detail, but is particularly useful for carving scripts and other ornamental decorations.

#22�Sweep�Wing�Parting�Tools

05F94 4mm ............................................ $45.9905H23 6mm ............................................ $46.9905H24 8mm .............................................$47.9905H25 12mm .......................................... $53.99

WING V-TOOLSWING V-TOOLS

PFEIL�Carving�SupportAnd�Carver's�ScrewFrom the makers of the World’s finest carving tools comes a practical carving support made from solid Beech. The support is clamped into your workbench's vise and used in conjunction with the carver's screw (sold separately) to provide you with unlimited accessibility to your work piece. To use the carver's screw, simply drill a hole into your blank, and screw it into your work piece, slide through the slot in the carving support and tighten the wing screw to secure.05E75 (A) carving support 700mm ......... $131.9905E76 (B) carver's screw 240mm ...........$104.99

A

B

PFEIL�Swiss�Made�Fishtail�Gouge�SetFishtail gouges are designed for use with a mallet and perfect for quick removal of waste and for large scale projects. Like all Swiss made tools, these follow pfeil’s legendary quality formula of the highest grade, hardened steel, polished and ground to a razor sharp edge. Approximate blade length is 51/2" with overall length of approximately 111/2". Includes 60mm skewed Dräyer Gouge, 60mm #2, 60mm #5, and 50mm #7 Fishtail Gouges. Natural oil finished hornbeam handle with heavy duty ferrules.05B48 4-pc. Fishtail Gouge Set .............. $399.99

A

Carving


PFEIL Swiss�Made�Brienz�Intermediate�SetFollowing the introduction of the Swiss Brienz Collection, we had many requests for a similar boxed set in the Swiss Intermediate carving line. We are happy to introduce a boxed, 18-piece Swiss Intermediate carving tool set which not only includes the 12 tools of the original set (05H01), but also includes 6 new profiles never offered before. The new profiles featured in this boxed set are a 4mm #7 Gouge, 14mm #7 Gouge, 10mm #7 Bent Gouge, 12mm #5 Gouge, 12mm #2 Gouge, and 10mm #8 Gouge. The remaining 12 profiles are 8mm Straight Chisel, 8mm Skew Chisel, 3mm #5 Gouge, 8mm #5 Gouge, 7mm #8 Gouge, 5mm #9 Gouge, 10mm #9 Gouge, 1mm #11 Veiner, 3mm #11 Veiner, 7mm #8 Spoon Gouge, 2mm #12 V-parting, and 8mm #12 V-parting. The lacquered beech box has a sliding top, with individual tool compartments for each tool.05Q21 .................................................................................. $494.99

pfeil®

PFEIL�Swiss�Made�Brienz�Collection�Carving�Set�If you want to own the finest carving tools in the world, this is the set for you. The Swiss carving tools in this premiere, set were chosen in collaboration with Mr. H. P. Stähli, Master Woodcarving Instructor at the world renowned Kantonale Schnitzlerschule Brienz woodcarving school in Brienz, Switzerland. Tool set includes: #1 Straight Chisel 16mm, #1 Skew Cut Chisel 16mm, #2 Gouge 20mm, #3 Gouge 3mm, #3 Gouge 12mm, #3 Gouge 25mm, #5 Gouge 35mm, #7 Gouge 20mm, #8 Gouge 7mm, #8 Gouge 18mm, #8 Gouge 25mm, #8 Spoon Gouge 18mm, #7 Heavy Bent Gouge 25mm, #9 Gouge 7mm, #9 Gouge 15mm, #11 Veiner 2mm, #11 Veiner 10mm, #15 V-Parting Tool 3mm, #12 V-Parting Tool 10mm, #14 V Parting Tool 8mm, and a Brienz Carver’s Knife. In addition to these 21 Swiss carving tools, you’ll complete your set with a 141/2 oz. beech carving mallet, a No. 1 and a No.2 Arkansas honing stone, and one 4 ounce container of sharpening oil, all conveniently packaged in a rugged pfeil canvas storage roll.05B58 ..................................................$799.99

pfeil®

PFEIL Swiss�Made�Professional�Carving�SetSet�of�6�Pfeil® “Swiss�Made”�Professional�Carving�Tools is made up of the most popular tools from our set of 12. Not sure which shapes to start with? We recommend this set. Includes 8mm straight chisel, 12mm No. 5 gouge, 10mm No. 7 gouge, 10mm No. 9 gouge, 3mm No. 11 veiner, and 6mm No. 12 V-parting tool. Individual tools from our vast selection may be added later when the sizes and shapes needed for your type of work are discovered.05W20 6 tools only Save Over $30! ... $152.9905B57 (A) Swiss Brienz 12-pc. set .......$339.9913F10 (B) complete set Save Over $113!.......... .................................................... $389.99

pfeil® A

PFEIL�Swiss�Made�Brienz�Professional�Carving�SetsTwelve superior quality carving tools, preferred by professionals for the most demanding projects. Blades of polished tool steel are precision-tempered, ground and sharpened at the factory for immediate use. Octagonal, non-slip, non-rolling European hardwood handles. One each as follows: 5mm and 8mm�straight�chisel, 8mm skew, 12mm�No.�5�gouge, 20mm No. 5 gouge, 6mm No. 7 gouge, 10mm�No.�7�gouge, 4mm No. 8 gouge, 10mm No. 8 gouge, 10mm�No.�9�gouge,�3mm�No.�11�veiner�and�6mm�No.�12�V-parting�tool. Overall length of tools, 10". Complete set comes with deluxe canvas tool roll containing individual pockets for each tool, soft Arkansas multiform slipstone for preliminary sharpening, hard Arkansas multiform slipstone for final finishing, and a 141/2 ounce beech Brienz mallet with 31/8" diameter head. Set is over $419 in value!05B57 (A) Swiss Brienz 12-pc., in roll.........$339.9913F10� (B) complete set Save Over $114!... $389.99

6-Piece�Professional�SetNot sure which shapes to start with? We recommend this set of 6, shown�in�bold�above, made up of the most popular tools from our set of 12. Individual tools from our vast selection may be added later when the sizes and shapes needed for your type of work are discovered.05W20 6-pc. Set only Save Over $36! ...$152.99

B

Carving


PFEIL Swiss�Made�Chip�Carving�KnivesThe superb quality of our exclusive pfeil Swiss made tools is also available to chip carvers. This set of knives was designed especially for chip carving, but is also useful for whittling, carving, and even layout work. Forged of special alloy tool steel, blades hold their edge longer than most other knives of this type. Pre-sharpened for immediate use. Overall lengths between 51/4" to 71/2". Rc 57-60 hardness.05Z10 chip carving set (B & I) .................$24.9905Z20 whittler's set (A, G, K & L) ........... $54.9905Z11 A ....................................................$17.99

� A� B� C� D� E� F� �G� H� I� J� K� L� M� N�

05Z21 B ................................................... $16.9905Z31 C ................................................... $14.9905Z41 D ................................................... $14.9905Z51 E ................................................... $19.5005Z61 F ................................................... $18.5005Z71 G ................................................... $14.9905Z81 H ................................................... $14.9905Z91 I .................................................... $15.9905Z95 J .................................................... $14.99123011 K ................................................... $19.99123014 L ................................................... $19.9905Z93 M .................................................. $24.9905F97 N ................................................... $24.50

pfeil®

PFEIL Swiss�Made�#14� Roughing�KnifeThis robust knife features an extra-thick 17/8" long x 11/16" wide blade. Perfect for roughing out carvings, mak-ing heavy cuts, or as an all-round bench knife. The shape also allows this knife to be used for large scale chip carving. 73/4" overall length.05Z94� ....................................................$26.99

PFEIL�Carving�Adzes�and�HatchetOur newest tools from pfeil are perfect for those large carving or timber framing projects and feature the same attention to detail and high quality as our world famous Swiss made carving tools. Premium tool steel is hardened to 56-58 Rc to create a durable, resilient cutting edge, which stays sharp longer. All tools feature “through eye” forging and come handled, ready for use. Solid ash handles are unfinished.

Carving�Hatchet has a 5" cutting edge with an overall tool length of 18".05Z98 .......................................................$120.99

Straight� Head blade is 3" wide; overall tool length is 18".05Z96 ........................................................$117.99

Curved� Head blade is about 21/2" across, with a curve that approximates a #9 sweep carving tool profile. Overall tool length is 18".05Z97 .......................................................$122.50

Small�Curved�Head adze’s blade is about 2" across, also with a curve that approximates a #9 sweep. Overall tool length is 11". The tool’s smaller size makes it a perfect bowl adze.05Z99 .......................................................$139.99

pfeil®

PFEIL Swiss�Made�ScorpA roughing-out tool for making bowls, spoons, and similar concave shapes. The comfortable hardwood handle can be gripped firmly for quick, accurate cuts. The thick shank reduces chatter and increases ac-curacy. Width of offset blade 11/4", 7" overall length. Honing required before use.11V51 ................................................... $37.99

PFEIL Swiss�Made�Sculptor’s�SetIncludes the six most useful sizes and styles for three-dimensional figure carving. The steel blades will take the hard use necessary for roughing out a block and hold the razor-sharp edge vital to a clean, crisp surface. Set includes 30mm chisel; 30mm

skew; 30mm No. 5 gouge; 30mm No. 7 bent gouge; 35mm No. 9 gouge; and 20mm No. 12 V-parting tool; 4" diameter head, 231/2 oz. beech Brienz mallet, and 15-pocket canvas tool roll. 13G10 complete set Save Over $63! .. $349.9913G20 6 tools only Save Over $55! .....$264.99

pfeil®

PFEIL Swiss�Made�DrawknivesFinely machined from the best alloy tool steel, each drawknife is shaped to give optimum control when shaping blanks or making critical finishing cuts. Feature hand-turned nonslip cherry handles; ample finger space around blades for safe holding during use; presharpened, single-beveled cutting edges to shear wood effortlessly and rehone easily. Exceptional tools.Straight�Drawknife. Blade 5" long x 7/8" wide, overall length 121/2".05T11 ...................................................... $56.99Carver’s�Drawknife. Blade 41/2" long x 7/8" wide.05T12 .......................................................$63.99

Large�Carver’s�Drawknife.�Blade is slightly convex, 91/2" long x 1" wide, 17" overall. Includes leather sheath.05Z03 ..................................................$106.50

PFEIL�Swiss�Made�ScorpsThese scorp, or inshaves follow pfeil’s legend-ary quality formula - a special hardened alloy of chrome-vanadium steel, ground and polished to a razor sharp edge, ready to use right from the box. The 11/4" wide blade will last a lifetime. The single handle has 21/2" blade radius, while the double handle has 5" flattened radius cutting face. Both feature 5" natural oil finished Cherry handles.05B55� 65mm, single handle.................$79.9905B56� 160mm, double handle .............$89.99

Carving


the handle. Blade is 17/16" long, handle 53/4" long.18S22 ...................................................... $17.99�

(B)�Detail�Knife. This is the blade profile that Rick has been hand-shaping for his detail work. The 17/16" blade has just the right taper for both maneuverabil-ity and strength. Like the carving knife, the blade is set deep into the cherry handle with a cutting edge that starts right at the handle. The ultimate tool for the important final cuts that separate an average carving from a master carving.18S23 ...................................................... $17.9918S30 set of 2 Save Over $6! ..............$29.95

Rick�Bütz�Carving�KnivesShown in his books and television series, Rick developed these tools to provide carvers with knives that are easier to hold, more efficient in cutting, and safer to use. A special forward notch in the cherry wood handle safely puts your hand closer to the blades, and you’ll find you have more power and control with this feature. The oil finish protects the knife handle and gives greater holding power than regular lacquered “slick” finishes. All these features make the Bütz knives carving tools that are sure to please woodcarvers of all skill levels. Require honing before use. Germany.

(A)�Carving�Knife. This is the knife that Rick uses for roughing out, shaping and general whittling. Sheepsfoot-style blade is set deep in the cherry wood handle with a cutting edge that starts right at

A

B

Pineapple courtesy of Ken Kupsche, Parkersburg, WV.

RAMELSON�Beginner’s�Carving�ToolsHighly recommended for the new carver doing simple or detailed work. Set includes six tools: 5/16" chisel, 5/16" skew, 5/16" bent chisel, 9/64" straight gouge, 5/16" bent gouge, and 9/64" bent V-parting tool. Made of high-quality tool steel, factory-sharpened and ready for use. Overall length 61/8", blade 21/2".14I21 set of 6 .........................................$39.99

RAMELSON�Carving�ToolsThese tools feature hardwood handles with a metal ferrule. Comfortable 61/4" to 61/2" lengths make them easy to control for detail carving. Factory-sharpened and ready for use. Made in the USA of high-carbon tool steel.127159 12 tools only Save Over $23! $135.99127145 1/4" No. 9 gouge ...........................$16.99127146 5/16" No. 8 gouge .........................$16.99127147 3/8" skew ......................................$16.99127148 3/8" No. 7 gouge ...........................$16.99

127149 3/8" chisel .....................................$16.99127150 1/4" V-parting ................................$18.99127151 (A) set of 6 tools above ...............$79.99

127152 3/8" No. 9 gouge ...........................$16.99127153 3/8" No. 5 fishtail gouge ..............$16.99127154 1/2" No. 5 fishtail gouge...............$16.99127155 1/4" No. 9 gouge ...........................$16.99127156 5/32" V-parting ...............................$16.99127157 5/32" U-veiner ................................$16.99127158 (B) set of 6 tools above ..............$79.99

B

A

6-Piece�Palm�Set�B** Includes: 3mm No. 5 gouge; 6mm No. 7 gouge; 10mm No. 7 gouge; 5mm No. 9 gouge; 1mm No. 11 veiner; 1mm No. 12 V-parting tool.05V11 set (B) Save Over $22! ..................$119.99

6-Piece�Palm�Set�C.�Includes: 2mm No. 15 V-parting; 4mm No. 12 V-parting; 0.5mm No. 11 veiner; 2mm No. 9 gouge; 7mm No. 8 gouge; 3mm No. 8 gouge. Sorry, not available individually.05Y75 set (C) ................................................. $149.99

6-Piece� Palm� Set� D.� Includes: 4mm No. 1 chisel; 4mm No. 1 skew chisel; 5mm No. 5 gouge; 4mm No. 7 gouge; 7mm No. 8 gouge; 2mm No. 11 veiner.Sorry, not available individually.05E58 set (D) ................................................ $134.99

12-Piece�Palm�Set includes all tools of Set A and B above plus a 12-place storage rack.05Y70 12-pc. set Save Over $110! ........$219.9905Y71 12-place storage rack ..................$43.50�

8-Piece�Swiss�Palm�Sets8-Piece�Palm�Set�A�+ Includes: 8mm No. 12 V-parting, 10mm No. 9 gouge, 10mm No. 8 bent gouge, 14mm No. 7 gouge, 12mm No. 5 gouge, 12mm No. 3 gouge, 12mm No. 1 gouge, 12mm No. 1 skew chisel. Sets include an 8-place wood storage rack.05Y10� 8-piece palm set (A) Save Over $58! ..$184.99

8-Piece�Palm�Set�B��includes the following eight tools: 12mm No. 2 gouge, 12mm No. 4 gouge, 12mm No. 7 bent gouge, 10mm No. 8 gouge, 7mm No. 9 gouge, 7mm No. 11 gouge, 6mm No. 15 V parting, 10mm No. 25 back bent gouge. Sorry, not available individually.05F98� 8-piece palm set (B) �..................$179.9905D01* 8mm chisel ................................... $23.5005R09* 8mm skew .................................... $24.9905T41*� 8mm bent chisel .......................... $23.5005X11*� 8mm No. 5 gouge ........................ $23.9905Y12*� 3mm No. 11 veiner ...................... $24.5005Y22*� 4mm No. 12 bent V ...................... $23.9905Y32** 3mm No. 5 gouge......................... $22.5005Y42** 6mm No. 7 gouge ......................... $22.9905Y52** 10mm No. 7 gouge ....................... $22.9905Y62** 5mm No. 9 gouge......................... $25.5005Y82** 1mm No. 11 veiner ...................... $23.9905Y92** 1mm No. 12 V-parting ................. $24.5005Y01+ 8mm No. 12 V-parting ..................... $27.9905Y02+ 10mm No. 9 gouge ..........................$26.9905Y03+ 10mm No. 8 bent gouge..................$26.5005Y04+ 14mm No. 7 gouge ...........................$28.9905Y05+ 12mm No. 3 gouge ..........................$24.5005Y06+ 12mm No. 5 gouge ..........................$24.5005Y07+ 12mm No. 1 gouge...........................$26.5005Y08+ 12mm No. 1 skew chisel .................$22.9905Y90+ 8-place storage rack ........................$34.99

Replacement�Palm�Tool�Handle of unfinished Euro-pean hardwood.05Y99 extra handle ...................................... $8.50

PFEIL Swiss�Made�Palm-Handled�Carving�SetsDesigned for wood block carving, yet furniture-makers and decoy carvers like their 43/4" length for delicate, intricate work. Hardwood handles fit the palm of your hand so your fingers can guide and control the action of the razor-sharp blade. Half-round handles make long, low cuts easier and prevent the tools from rolling off your workbench.

6-Piece�Swiss�Palm�Sets*6-Piece�Palm�Set�A includes 8mm chisel; 8mm skew; 8mm bent chisel; 8mm No. 5 gouge; 3mm No. 11 veiner; 4mm No. 12 bent V-parting tool.05P01�� set (A) Save Over $21! .............. $119.99

pfeil®

Carver’s�Spoon�PlaneEasy to control and quick cut-ting, our spoon plane quickly and easily makes hol-low or dished-out cuts. Perfect for spoons and bowls i t can also be used to smooth the sur-face of large carvings. Made of cast bronze, then coated with titanium nitrate for a super-smooth finish, the plane features a large comfortable handle for extended use. Plane is 13/4" wide, 61/8" long, with a 13/8" wide blade. Requires honing before use.144822 ......................................................$19.99

Carving


FLEXCUT™�KnivesMade with Flexcut’s high-quality spring steel, tempered to a hardness of Rc 59-61, and fitted with tremendously comfortable ash handles, these knives perform as marvelously and hold an edge as well as Flexcut carv-ing tools. There’s a knife for every cutting and shaping application. Presharpened for immediate use.814845 (A) chip carving knife ....................$18.99814266 (B) cutting knife .......................... $18.99814267 (C) detail knife .............................$19.99147461 (D) mini detail knife ......................$23.99814265 (E) skew knife ............................. $18.99814268 (F) large cutting knife ..................$22.50820598� (G) pelican knife ...........................$22.99

A

B

C

D

E

F

G

FLEXCUT™�Starter�KitBonus:�FREE�Relief�Carving�DVD!�A complete carving set all in one box. Seventeen cutting tools, two interchangeable handles and a SlipStrop to keep them all sharp! Everything you need for mallet, palm or knife carving. Set includes a 5/8" #1 chisel, 9/16" #2 skew, 1/4" and 7/8" #3 gouges, 1/8" #5 gouge, 1/2" #6 gouge, 1/4", 3/8" and 11/16" #8 gouges, 9/16" #9 gouge, 1/16" #11 gouge, 3/16" and 1/2" #11X thumbnail gouges, 5/32" 45° V-tool, 3/8" 70° V-tool, 7/8" back bent gouge, cutting knife, ABS quick-connect palm handle, quick-connect Power Handle, SlipStrop and compound. All neatly packed in a wooden storage case. Also includes the DVD Relief Carving In A Different Light by David Bennett. A $14.95 value, yours FREE!146913� ..................................................$179.99

FLEXCUT™�Carvin’�JackCarry a complete carving kit in your pocket! The blades of this unique carving tool fold into their handle just like a pocket knife’s blades. Professional carvers will love the high quality edge-holding features of Flexcut’s resilient spring-steel blades. The Carvin’ Jack features six tools: 3/4" #7 sweep knife blade; 3/8" #6 scorp; 3/8" #11 gouge; 3/8" #1 straight chisel; 13/8" detail carving knife; 1/4" 70° V scorp. All tools securely lock in both opened and closed positions. Conveniently sized at only 41/4" long, 15/16" tall, and 5/8" thick when closed, about the same size as a large pocket knife. Carry it with you, and you’ll never be caught without carving and whittling tools again!145445 right-hand model ......................$129.99145485 left-hand model ........................$139.99

FLEXCUT™�Scorp�SetA Scorp is essentially a right-angled gouge designed for carving in areas where the full length of a gouge will not fit. Knife carvers find them useful for hol-lowing deep, narrow cavities. Included tools are 1/8" and 3/16" deep gouges, a 5/16" shallow gouge, and a 3/16" 60° V, all with razor-sharp high-carbon steel blades. Our set contains these four versatile profiles, a scorp strop specifically designed to help you keep your edges razor-sharp, and a convenient four-pocket tool roll for storage.144775 ......................................................$89.99

Woodcarver’s�Safety�GloveThe greatest protection possible against the hand and finger injuries that often result from accidental knife slips. Made from a patented combination of Kevlar, Spectra and stainless steel, this glove is unsurpassed for cut resistance, durability, softness and wearability. Gloves are ambidextrous, tend to run large and can stretch. If in doubt, order one size smaller. Measure around your hand at the fullest part without your thumb: the diameter in inches equals your glove size. USA.142886 extra extra small, 3" - 4" .............$22.9906I64 extra small, 4" - 5" .......................$22.9906I61 small, 5" - 6" ................................$22.9906I62 medium, 7" - 9" ............................$22.9906I63 large, 9" - 11" ...............................$22.99

A

B

FLEXCUT™�Handed�Hook�KnifeMade with Flexcut’s high-quality spring steel, tem-pered to a hardness of Rc 59-61, and fitted with smaller faceted Ash handles designed for multiple gripping styles and many hours of comfortable carving. The hook knife blade is curved similar to a gouge for working in hollows with ease and allows for fast stock removal. The handedness (right or left) is designated by pulling the tool toward you.836554� (A) right handed .........................$24.95836555 (B) left handed ...........................$24.95

FLEXCUT™�DrawknivesMade from the same resilient spring steel as Flexcut’s Palm Tools, these carver’s drawknives flex in either direction to do round or hollow work. Hand-honed and polished to a razor-edge and perfectly suited for rough or delicate shaping. Fitted with ash handles similar to the Flexcut Palm Tools.814846 5" curved blade ............................$39.99145370 3" straight blade .......................... $37.99

Two-Blade�Folding�Carving�KnifeFeatures a chip and detail blade so you can carve any time! The 1" long high-carbon stainless steel blades offer excellent edge retention and inhibit rust. The high-strength, ergonomically shaped handle is made of stainless steel with Pakawood inlays. Closed, length is 31/4" and a slim 7/16" thick fits comfortably in your pocket.831906 .................................................... $19.99

Leather�Thumb�Guards�Protect�Thumbs�Or�Fingers�While�CarvingMade of split leather with an elastic cloth backing and closed end for extra fit and safety. 16V22 small - children .........................pair�$3.9916V23 medium - adult female ............pair�$3.9916V24 large - adult male .....................pair�$3.99

B

FLEXCUT™�Profile�Carving�ScrapersCabinet scrapers have been used for years to finish flat or simple contour surfaces. Flexcut has used this same idea to create scraper blades which provide a variety of profiled scraping edges. In just a few strokes you can remove any uneven surface or finish from any contour without the use of sandpaper. Not only does this save the crisp details of your work, but it also saves you money too! Set includes six profiles and power handle. Palm handle sold separately.151339�� ....................................................$49.99815644� (A) palm handle, only .................$13.99815645� (B) power handle, only ...............$14.99

A

Carving


DOCKYARD�Micro�Carving�Tools�are individually hand-forged, tempered to Rc58 for a durable edge, and tested to ensure proper sharp-ness and edge profile. Overall lengths 5" with 4" octagonal cherry wood handles. Sets contain: single and double-bevel chisels, double-bevel skew chisel, 90° V-parting, and No. 11 U-gouge. Sharpened and ready for use.17K41 1.5mm width set ........................ $44.9917K21 2mm width set ............................ $44.9917K51 3mm width set ............................ $46.99

Additional�Micro�Carving�Sets (not photographed) will increase the scope of your detail work. Made with the same fine steel and craftsmanship as our other micro tools. Presharpened and ready to use.

Micro�Carving�Expansion�Set. Useful shapes include 2.4mm and 3.25mm dogleg chisels, 75° V-parting, 4mm No. 9 gouge, and 5mm No. 8 gouge.

17L31 set of 5 ........................................ $51.99

1.5mm�set� 2mm�set� 3mm�set

Micro�Sculpture�Set includes 4mm No. 9 gouge, 3mm and 2mm No. 11 gouges, 2mm 90° V-parting and 2mm double-bevel chisel.

17N10 set of 5 ........................................ $51.99

Micro�Gouge�Set includes 5mm No. 8 gouge; 4mm No. 9 gouge; 3mm, 2mm and 1.5mm No. 11 gouges.

17N50 set of 5 ......................................... $52.99

Micro�Dogleg�Chisel�Set includes 3.25mm, 2.75mm, 2.4mm and 2mm dogleg chisels.

17N60 set of 4 ......................................... $44.99

Micro� Carving� Tool� Pouches are made of hand-stitched heavy canvas with flip top, and hook & loop closing strips. Will hold five micro carving tools. 3+

01L42� .............................. ea.�$10.99 ......... $9.89

MERLIN�Power�CarverCarve, cut, shape and sand with one tool! The spe-cial 8-tooth chain disc, which is mounted between two stainless steel plates, easily cuts the hardest of woods regardless of grain or knots. Only 2" in diameter it reaches into tight areas which previously had to be carved and smoothed by hand. You can rough out with the chain disc, then smooth and finish shaping with the tungsten-carbide disc and 100-grit flap sanders. These discs are designed to be driven by the powerful and proven Proxxon long-neck mini grinder, which features electronic speed control from 3,300 to 13,000 rpm. Merlin Set includes an 8-tooth carving disc, flat-profile tungsten-carbide disc, silicon-carbide grinding wheel, 100-grit flap sander, aluminum oxide cut-off wheel, a molded storage case and instructions. All discs have a 10mm arbor.145644 complete Merlin Kit ................ $204.99145645 2" 100 grit flap sander ................. $6.99145646 2" 150 grit flap sander ................. $6.99145647 2" tungsten-carbide coarse disc ..$39.99145648 2" tungsten-carbide med. disc�..... $39.99145649 2" stone carving disc .................$39.99145650 8-tooth chain disc ......................$14.99

KING�ARTHUR�Holey�Galahad�®These discs provide a unique ability to see the surface you are carving as you work. Holey Galahad quickly allows you to shape peaks and valleys into smooth surfaces as you see them, eliminating the need to “feel” the high and low spots. The extremely sharp, long-wearing conical teeth provide superior surface removal with a very smooth action. Made of durable tungsten-carbide and available in round and flat profiles. Available in coarse, medium and fine grits.149989 round coarse, blue .....................$89.99149990 round medium, red ....................$89.99149991 round fine, green........................$69.99149992 flat coarse, blue .........................$79.99149993� flat medium, red�........................ $79.99149994� flat fine, green ............................$69.99

King� Arthur� Universal� Mounting� Nut.� Specially designed for mounting tandem combinations of Lancelots, Lancelots/Squires and Holey Galahad. Fits all 5/8" x 11 TPI arbors.149995 ...................................................... $9.99

LANCELOT�Wood�Carving�Discs�(A)The special chainsaw blade is securely held between two stainless steel plates. Mount the 4" dia. Lancelot in your 4" or 41/2" angle grinder and it easily cuts the hardest woods regardless of grain or knots. The 14-tooth model is great for “roughing-out”, the 22-tooth model leaves a smoother “finished” sur-face. Teeth can be resharpened using a standard chainsaw file. Maximum 14,000 RPM, chains can not be interchanged between models. Teeth Arbor04D02 14 .............. 5/8" .............................$44.9904D04 22 .............. 5/8" .............................$44.9904D06 14 .............. 7/8" .............................$44.9904D07 22 .............. 7/8" .............................$44.9904D03 replacement 14T chain ................$23.9904D05 replacement 22T chain................$23.99

SQUIRE�Mini�Carving�Discs�(B)Can be attached to another disc for fhe ultimate in power carving! Although it can be used alone as a small carving disc, by attaching the 33/8" dia. Squire to a Lancelot disc with the Universal Mounting nut (below) you can effectively double your cutting capacity. Remove waste material faster and curved work is easier and smoother than using a single disc. Fits all mini grinders with 5/8" x 11 TPI arbors.127230 Squire with 12 tooth chain ..........$44.99127231 Squire with 18 tooth chain ..........$44.99

King� Arthur� Universal� Mounting� Nut.� Specially designed for mounting tandem combinations of Lancelots, Lancelots/Squires and Holey Gallahad. Fits all 5/8" x 11 TPI arbors.149995 ...................................................... $9.99

AB

PFEIL�Drake�Undercutting�ToolsDesigned especially for relief carving. The shape and size of the cutting edge allows precise and controlled undercuts in hard to access areas.05X21 undercutting tool left ...................$35.9905X22� undercutting�tool straight ............$35.9905X23 undercutting tool right .................$35.99

Give The Perfect Gift!Give the Woodcraft Gift Card anytime

of year. It’s the ideal gift for family and friends, because they can choose just

what they have in mind.

Power Carving


Detail�Handpiece�This small, lightweight handpiece features a 9/16" diameter body so you can hold it like a pencil for your fine detailing. Comes with 1/8" and 3/32" collets and collet wrench. 41/2" overall length. Fits most flexible-shaft tools.147228 ......................................................$38.99147230� 1/8" collet ........................................ $2.99

Carving�Handpiece�Convert your flexible shaft tool to a recip-rocating carver. In-cludes a 1/4" 90 degree V-chisel, 3/8" #9 gouge, 3/8" straight chisel, 3/8" round nose chisel, 5/16" straight chisel, and collet wrench. Fits most flexible shaft carving tools. 51/2" overall length, 1" diameter. 147227 ...................................................... $47.99

1/4�HP�Flexible-Shaft�Carver�Kit�Tackle a complete range of projects with this heavy-duty Power Carving Kit – from fine detail work with smaller burrs to roughing-out at a much greater speed than you could with less powerful motors. And, the powerful 1/4 hp motor is reversible – a bonus for left-handed carvers. This carver has a super flexible 42" shaft that does not require lubrication, eliminating the messy chore of disassembling and greasing the shaft. The kit includes a 1/4 HP, 20,000 rpm motor, variable-speed heavy-duty foot control pedal, standard rotary handpiece, 3 collets (3/32", 1/8", 1/4"), wrench, and tool hanger. 120V.147220� 1/4 HP carving kit .......................$179.99147221�� outer sheath ............................... $11.99147222� cable ............................................$10.99147223� motor brushes for WE-330R ........ $4.50

Accessories:Foot-Operated� Speed� Control.� Regulates motor speed, leaving hands free to hold tools and work-piece. Can be used with most flexible-shaft kits. Cord length is 74".147226 (A) .................................................$39.99

Motor�HangerWith just the twist of a knob, you can clamp this hanger to your work surface. Since the sturdy post is comprised of 3 rigid-steel tubes that screw together, you can also vary the height of the hanger from 13" to 40".147225 ......................................................$25.99

Standard�HandpieceProvides great control for detail work and makes it easy to get into hard-to-reach areas. This ergonomic hand-piece fits comfortably in your hand because of its tapered end. Comes with 3/32", 1/8", 1/4" collets and wrench. 147231�� standard handpiece....................$43.99147232� 3/32" collet�...................................... $4.99147233� 1/8" collet�........................................ $4.99147234� 1/4" collet�........................................ $4.99

A

High-Torque�Carver/EngraverIdeal for detailing and intricate carving, this powerful high-torque handpiece features variable speed, so you can always be operating at the optimum speed required by your bit or type of stock. Because the motor is built into the handpiece, there is no flexible shaft. The lightweight body and cord allow you to carve longer, more comfortably, and with greater accuracy. At only 61/4" long and 1" diameter, it fits comfortably in the hand and is light enough to be held like a pencil. Variable speed: 3,000 to 13,000 RPM. Includes 1/8" and 3/32" collets.147235 ...................................................... $67.99

ARBORTECH�Power�ChiselA high-powered reciprocating chisel will save you time and reduce fatigue while working on everything from detailed carvings to rough work. The new Arbortech Power Chisel operates at 12,000 strokes per minute providing smooth action and excellent control to make quick work of labor-intensive operations. The powerful 700-watt motor delivers a low vibration and deep penetrating cut. As a safety precaution, the quick-change chisels are only active when pressed into the workpiece. Kit�includes: 20mm flat chisel; 20mm No. 7 gouge; and 25ml of lubricant. The 5-Piece�Chisel�Pack�includes the following gouges: 20mm No. 3; 12mm No. 5; 13mm No. 9; 7mm No. 11; and an 8mm 60° No. 12. The 3-Piece� Chisel� Pack includes: 7mm No.8; 18mm 90° deep-V; and a 20mm No.9. Blades require honing before use.142273 power chisel kit ........................ $204.99142274 5-piece chisel pack ...................$119.99143178 3-piece chisel pack ..................... $74.99

AUTOMACH�Power�CarverModel� HCT� 30A. The newest advancement in woodcarving technology! The Handcraft Carver is rugged and reliable. Aluminum die-cast body is light and vibration-free. Special reciprocating action of the cutterhead carves through the toughest woods with just simple hand direction. Greater pressure causes a deeper cut. For safety, free-floating action keeps blades motionless until pressed against wood. The laminated blades move at 10,000 vibrations per minute, leaving a smooth cut surface. Carvers appreciate the versatility in portability and move-ment, as well as accuracy and speed. Powerful 80-watt ball-bearing motor delivers precise 1mm cutting strokes. Includes 6' grounded cord, rear on/off switch, hanger, five blades, two spanner wrenches, and complete instructions for use. Body measures 228mm (9") long x 44mm (13/4") diameter, 990 grams (2 lbs.) in weight. UL listed.09G41 ................................................... $299.99

Reciprocating Carving Action!

FOREDOMFlexible-Shaft�Tools1/6�HP�5200�SR�Deluxe�Kit�combines the best and most important features in a flexible-shaft tool:• More Power - 1/6 HP, 33% more power than the Foredom Series S motor.• Reversible - great for left-handed users.• Reliable - Two-year manufacturer’s warranty.Includes the SCT foot control, No.44T handpiece, 3/32", 1/8" and 1/4" collets, No.28 handpiece with 1/8" and 3/32" collets, safety glasses, plus a 47-piece woodcarver’s professional accessory kit. The kit includes purple ceramic sanding bands & discs, V-stones, ScotchBrite radial bristle discs, Typhoon carbide burrs, CeramCut blue stones, rotating burr and bit holder plus a small round burr holder with lid. 0-18,000 RPM.146886 (A) .............................................. $354.991/3�HP�TX�Flexible�Shaft�Kit.�From start-up to full speed the TX permanent magnet DC motor deliv-ers more torque with complete control. The TX motor, made with the most advanced rare-earth magnets, delivers more torque in the low, medium and full speed range. This new level of power makes the TX ideal for lower-speed jobs like carv-ing with large burrs. Kit includes TX hang-up motor, No. 44T handpiece with 3/32", 1/8" and 1/4" collets, pin & wrench, woodcarving accessory kit with 12 different grinding tips, spare motor brushes and shaft grease. 0-15,000 RPM.146888 .................................................... $374.99

A

Power Carving


ARBORTECH�WoodcarversArbortech is a safe and effi-cient woodcarv-ing b lade of hardened steel and tungsten carbide. This tool is ideal for shaping, sculpt-ing, trenching, planing, and trim-ming.smoothly, whether with or against the grain. The chip limiter, restricts the depth of cut and helps prevents kickback and grabbing. The Pro-Guard affords you the highest level of protection, while allowing a clear view of the blade. The Industrial�Pro mounts on 4" or 41/2" angle grinders and fits Makita 9504B and 9526PB grind-ers without the use of adapters. It also fits Bosch 1346A and 1347A; Makita N9504B and 9527PB; and Metabo AG650S. The Mini�Grinder fits Hitachi G12SA, Makita 9524NB, 9521NB, 9520NB, 9523NB; and Ryobi SG100. If your grinder is not listed, call and we’ll check our chart. Adapters are available that allow the wheels to fit most grinder models.

Industrial�Pro�Kit includes a 4" Industrial Woodcarver with three sharpenable carbide teeth, Pro-Guard, and adjustment key. 128258 industrial pro kit .......................$159.99128805 repl. carbide teeth (3) ................ $61.50

Complete�Mini�Grinder - a powerful 600-watt, right-angle drive rotary grinder. Glass reinforced extension arm gives excellent visibility and strength. Includes extra 2" blade and mini sander assortment.142264 complete mini grinder ............ $234.99128824 2" industrial blade......................$33.99

PROXXON�Handheld�Belt�SanderIdeal for use in limited space, this sturdily built 115V belt sander works on flat surfaces, corners, and radii. The sanding head tilts through 60°, which eases access in many difficult spots. Belt speeds range from 300 fpm to 700 fpm (feet per minute). The platen is 3/8" wide and 45/8" long, while the overall sanding arm is 61/2" long. Belt replacement requires a push against the platen and bar, slip it off, slip the new one on. Track if needed and you’re ready to go again. The vacuum dust attachment fits wands or hoses up to about 13/8". Motor draws about 100 watts.822518 ....................................................$154.99822520 80 grit belts (5) .............................. $5.99146893 120 grit belts (5) ............................ $5.99822519 180 grit belts (5) ............................ $5.99

Power�Carving�DustCollectorThe two indi-vidually con-trolled fans of this compact, portable unit, draw up to 500 cubic feet of air per minute using computer-grade, maintenance-free motors. This self-contained unit even has dual 115V outlets to power your sanders or power carver. Includes a Plexiglas shield that attaches to the dust collector for increased efficiency. 8" x 101/2" x 21".140605 .................................................. $209.9909G18 dustless repl. air filter ..................... $9.99

Power�Carving�KitA high-quality variable-speed motor tool is the center-piece of this kit that features rotary and reciprocating action, and handheld or flex-shaft carving! The unit features ball-bearing construction, 1/8" collet with shaft lock for easy bit changes, folding bail for hanging the unit, and separate on/off switch and variable speed controls. When used in the hanging mode you can at-tach either the reciprocating or three-jaw chuck rotary handpieces to the 38" super-flexible shaft. Furnished with a five-piece ruby detailing burr set, two diamond burrs, two straight chisels (3/16" and 3/8"), 3/8" curved chisel, 1/4" V-chisel, and a 3/8" gouge. Complete kit includes handpiece wrench, shaft adapter nut, and form-fitted case. Accepts FLEXCUTTM power carver blades without adapter.141885 ....................................................$134.99

Double-Cut�Solid�Carbide�Burr�SetsThe fine diamond-like tooth pattern of these carbide burrs cuts very aggressively, yet leaves a surface finish much finer than coarse cutting burrs. Solid carbide heads are brazed to steel shanks. 30,000 RPM maximum. Set of the 8 in a fitted case.145074� 1/4" shank 8-pc. set .....................$49.99145075� 1/8" shank 8-pc. set .....................$49.99

Diamond�Carving�BurrsBecause diamonds are 1,500 times harder than the hardest metal they last longer than nor-mal burrs and may be used to cut or shape a wide variety of materials including wood, metal, stone, or glass. Available in 1/8" or 3/32" shank “jumbo tip” sets. Jumbo profiles are great for larger work or for areas where faster material removal is desired. 28-piece set includes 8-piece jumbo set and similar shank 20-piece set illustrated above.124326� 8-pc. 3/32" shank jumbo tip ..........$15.9918G21 20-pc. 3/32" shank ........................... $9.99124327 complete 28-pc. 3/32" shank set ..$24.99

124328 8-pc. 1/8" shank jumbo tip ...........$14.9918G27 20-pc. 1/8" shank ............................ $9.99124329 complete 28-pc. 1/8" shank set ...$24.99

Industrial�Grade�Sets.18G26 25-pc. 3/32" shank ........................$19.9918G28 30-pc. 1/8" shank ..........................$24.99

1/8"�Shank�Shown 20-Piece�Set

8-Piece�Set

FLEXCUTTM Power-Carver�BladesFlexcut has developed a new line of quality blades for reciprocating power carvers in the sizes and profiles you need most. The same low-resistance cutting edge that Flexcut is known for now allows your Ryobi, Proxxon, Automach or Wecheer carver to work less and carve more. Automach machines require brass adapters, available separately.129740� 1/8" No. 11 gouge * .................... $14.99129744�� 1/4" x 70° V-parting * ................ $12.99129738� 3/8" No. 3 gouge * .......................$13.50129739� 5/16" No. 5 gouge .........................$13.99129745�� 3/8" x 70° V-parting ++ ................ $14.99129743� 3/8" No. 8 gouge * ++ .................. $14.99140386��1/2" No. 28 spoon gouge............ $14.99145839 11/16" 90° V-parting....................$14.99129741� 5/8" No. 3 gouge ++ ..................... $13.99129742�� 9/16" No. 5 gouge ........................ $13.99128305 1/2" No. 8 gouge ..........................$14.99128303 3/4" No. 3 gouge ..........................$15.99128304 5/8" No. 5 gouge ++ ......................$15.99128300 1" No. 3 gouge .............................$15.99128301 7/8" No. 5 gouge ...........................$15.99128302 1" chisel .......................................$15.99145851� automach adapters (20) ..............$2.99145549 19-pocket blade tool roll ............$13.99815644 quick-connect palm handle .......$13.99819363 palm handle adapter .................$20.99Detail�Gouge�Set (*)contains an 1/8" No. 11, 1/4" 70° V-parting tool, 3/8" No. 3 and a 3/8" No. 8 gouge.128297 set of 4 Save Over $16! ............$38.95Roughing�Gouge�Set(++) contains a 3/8" 70° V-parting tool, 3/8" No. 8, 5/8" No.3, and a 5/8" No. 5 gouge.128298 set of 4 Save Over $18! ............$39.99Deluxe�Gouge�Set contains 14 of the tools listed above (does not include the 1/2" No. 28 spoon gouge or the 1" chisel).128299 complete set Save Over $56! $149.50

120-Piece�Diamond�Burr�SetHobbyist and seasoned pro alike will find themselves creating unbelievable detail with these diamond-tip burrs and a rotary power carver. Favorites of jewelers and metalworkers, diamond burrs are being discov-ered by woodworkers and woodcarvers. These bits offer fast but controlled cutting action. This 120 pc set offers 30 profiles in four grits, 150, 240, 400, and 600, so you can progress from rapid cutting to final finishing cuts with the same profile!149386 ......................................................$29.99

Power Carving


BA

C

over the old "sliplock" style in that it runs much cooler and the solid, silver brazed tips make better contact electrically in the handpiece. Old and new style tips are not interchangable in their respective handpieces. Complete with cord and jackplug to fit all Detail Master units. Stock numbers for tips (sold separately) are listed below.146540� (F)�repl. tip handpiece ............... $29.99

Foam�Handpiece�Protectors�provide extra air cool-ing of pens when burning at high temperatures. 4" long, plastic foam.128103 (G) 4 pack ...................................$10.99

Handpiece�Gripper�Rings fit in forward handpiece grooves for more finger tip turning control. Bag of 14 for two pens.06K82 bag of 14 .........................................$6.50

Handpiece�Care�Kit�keeps your pens in top condition. Includes a 37/8" x 1" x 3/8" hard Arkansas stone, 37/8" x 13/4" leather strop and 1 oz. bottle of lapping compound for shaping, polishing and cleaning tips. Plastic travel case included.06K71 .......................................................$47.99

(D)� “Etch� Master”� Pyro-graphic�System. An excel-lent starter unit for carvers or decorative craft burners. 35 watts of power for most woods, leather, and plas-tics. Due to limited power, do not use with large or x-long pens. Features on/off switch, dial heat regulator, and 6' cord.125468 ............. $129.99

Carrying�Cases. These convenient boxes have room for the control unit, extra pens and accessories.125469 Dagger units ................................$36.99125470 Excalibre and Sabre units ..........$36.99

Detail�Master�HandpiecesFixed-Tip�Handpieces, unlike replaceable-tip handpieces, do not lose efficiency due to oxidation build-up in the removeable con-nectors, and there is no need to wait for a “cool down” to change tip styles. See below for stock number.Fixed-Tip�Handpieces�(E) ..................... ea. $32.99

Replaceable-Tip�Handpieces offer a less expensive way to have several tip styles. While more economi-cal, they require slightly more care and maintenance, and can result in “lost time” when changing tips. This new model handpiece is an improvement

Calligrapher’sBurning�Pen�6BThe square-shaped tip is only 5/32" wide, like the fine nib of pens - except you write with heat, not ink.18K6B fixed-tip handpiece .....................$33.9918K6BR replaceable tip only ...................$10.99

DETAIL�MASTER�Burning�SystemsThe�Professional’s�Choice�For�Versatility,�Dependability�&�PowerEach model features solid state circuitry; variable head regulator dial; on/off switch; “on” indicator light; enameled steel body with stainless steel cover; easy-loading sockets for handpiece plugs; side handpiece holding scabbards, and a 5' power cord. Maximum temperatures of 2000°. Heat recovery time varies from model to model and is dependent on wattage. Pens not included, requires fixed-tip or replaceable-tip handpieces listed below.

(A)� Detail� Master� “Dagger� III” delivers 50 watts of power and is ideal for all general feather and decorative burning.125465 ................................................... $116.99

(B)�Detail�Master�“Sabre�IV” delivers 100 watts of power to meet the needs of serious carvers.125466 ...................................................$160.99

(C)�Detail�Master�“Excalibre” features two outlets so you can use your favorite pair of handpieces. Selec-tor switch regulates power to only one handpiece at a time for safety. Powerful 130-watt transformer can deliver tip heat from 0-2000° in seven seconds with rapid heat recovery.125467 ................. $204.99

(E)�Handpiece��$32.99�ea.� 18K1A 18K1B 18K1C 18K2A 18K2B 18K2D 18K3A 18K4A 18K4C 18K5A 18K6A 18K7A 18K7B 18K10A

Replac.�Tips� $8.99�ea.� 146541A 146541B 146541C 146542A 146542B 146542D 146543A 146544A 146544C 146545A 146546A 146547A 146547B 146540A

Not to scale

F

E

G

Handpieces�And�Replaceable�Tips

D

Tungsten�Carbide�BurrsThese revolutionary-styled, patented SSG-structured carbide burrs feature a fast, free-cutting action that works equally well cutting with or against the grain, and even on knots. Clogging caused by highly resin-ous or fibrous wood can be brushed out or burned off without damaging the teeth. The needle-sharp points of tungsten carbide can be “dressed”, just like a grind-ing wheel, to give an even smoother surface finish. We offer three grits - Gold, which is more of a medium grit burr leaving a surface finish that requires moderate sanding; Silver, which is coarse and fast cutting; Red, whose random spaced carbide has the fastest cutting action with minimum clogging, but leaves a surface that requires further work with finer burrs. These burrs will also cut fiberglass, plastics, rubber, soft stone, or composite materials. Overall lengths from 11/2" to 3", maximum RPM 28-30,000.

Sets of four of our most popular styles. Red Silver Gold Set X Coarse Coarse Fine Includes Each

140495 18N20 18N50 A, D, E, H ......... $67.99� N/A 18N30 18N60 I, L, N, O ..........$48.99

All burrs are available individually. Red Silver Gold Shank X Coarse Coarse Fine Dia. Style Each

140144 18N1A 18N4A� .... 1/4" .......A ......$16.99140145 18N1B 18N4B� .... 1/4" .......B ......$15.99140146 18N1C 18N4C� .... 1/4" .......C ......$15.99140147 18N1D 18N4D� .... 1/4" .......D ..... $21.50140148 18N1E 18N4E� .... 1/4" .......E ..... $21.50140149 18N1F 18N4F� .... 1/4" ....... F ..... $21.50��N/A N/A N/A� ....... 1/4" .......G

1/4"�ShankShown

�50%�of�Actual�SizeE

D

C

B

A F

G

T

H

1/8"�ShankShown

Actual�Size

N

M

L

K

J

I O

P

Q

V

S

R

Red Silver Gold Shank X Coarse Coarse Fine Dia. Style Each

140151 18N1H 18N4H� .... 1/4" .......H ......$21.99140152 18N1T 18N4T� .... 1/4" ....... T ......$15.99� N/A 18N1I 18N4I� ..... 1/8" ........I.......$12.99 N/A 18N1J 18N4J� ..... 1/8" ....... J ......$12.99 N/A 18N1K 18N4K� .... 1/8" .......K ......$12.99 N/A 18N1L 18N4L� .... 1/8" ....... L ......$15.99� N/A 18N1M 18N4M� ... 1/8" ...... M .....$15.99

Red Silver Gold Shank X Coarse Coarse Fine Dia. Style Each

N/A 18N1N 18N4N� .... 1/8" .......N ......$14.99 N/A 18N1O 18N4O� .... 1/8" .......O ......$14.99 N/A 18N1P 18N4P� .... 1/8" .......P ......$15.99 N/A 18N1Q 18N4Q� .... 1/8" .......Q ......$16.99 N/A 18N1R 18N4R� .... 1/8" .......R ......$16.99 N/A 18N1S 18N4S� .... 1/8" .......S ......$16.99� N/A 18N1V 18N4V� .... 1/8" .......V ......$16.99

Files & Rasps


Microplane� Interchangeable Blade FilesThe razor-sharp edges of the stainless steel blades yield aggressive, yet smooth cuts on even the hard-est woods and are acid-etched for long life and will never corrode. Once used, you'll wonder how you ever worked without a Microplane blade! The Starter Set features a high-strength poly-molded blade holder with integral comfort grip handle and provisions for the interchangeable 8" x 11/8" blades. Included in the Starter Set is a coarse cut flat blade. Additional blades, in flat, round and angle profiles, are available in coarse and fine cut.828809 starter set ....................................$19.99828812 flat blade, fine cut ....................... $11.99828810 round blade, coarse cut ..............$10.99828813 round blade, fine cut ...................$10.99828811 angle blade, coarse cut ..............$10.99828814 angle blade, fine cut ....................$10.99828815 3" handle w/insert ...................... $11.99

8-Piece Riffler Rasp SetThe coarse-cut teeth of these double-ended rifflers will eat through the toughest woods in no time, and the selection of 8 different shapes provides you with the right tool for every shaping job. Handmade in China by a small, specialized firm, these rasps are worked from quality steel to give you a set that will keenly perform for years and years. Rasps are 8" long with faces 1/2" to 5/8" wide. A tremendous value.140045 ..................................................... $22.99

Precision Needle FilesMade of high-quality chrome-alloy steel with deep, carefully milled gullets for rapid and clean cutting (No. 2 cut). Leaves a smooth finish on wood, metal and plastic. Twelve-piece set, 140mm (51/2") length.16H10 set of 12 .........................................$34.99

Needle Rasp SetThese small, quick-cutting rasps are highly valued for adding fine detail and intricate shaping. 61/4" long rasps comes in six different styles and includes a 33/4" wooden handle.01X30 set of 6 ...........................................$39.9902T11 extra handle ..................................... $6.99

Complete Woodburning KitsDecorativeBranding Kit. Kit includes nine interchangeable tips that give you unlimited design flexibility. The 30-watt branding tool can be used to decorate wood items, picture frames, leather articles and accessories, furniture, cabinets, and decorative plates. The possibilities are endless.127292 ......................................................... $37.50

Temperature Regulator. Use your single-wattage woodburning pen, soldering iron, stencil pen, or branding iron like a variable-wattage unit (500 watt maximum). 140231 ........................................................$39.99

10-In-1 Tool Kit. This versatile tool includes all of the tips and points needed for woodburning, soldering, leather craft, stencil and Styrofoam cutting. Includes a 30-watt professional iron with 6' cord, 7 woodburn-ing tips, 2 cutting and fusing tips, 1 soldering tip and a tool stand, all packed in a plastic case. Tool color may vary from that shown above.127290 .......................................................$36.99

Cabinetmaker’s Files & Rasps(A) Cabinet Rasps. Used by cabinetmakers for fast, accurate wood removal. Curved on one side, flat on the other, single cut on the edges. The shorter the rasp, the smaller the rasp teeth, the finer the cut. 2nd cut. Handle (G) sold separately. Length Size Handle06B31 8" .......... 29/32" x 1/4" ........S ............$29.9906B32 10" ........ 11/8" x 9/32" ...... M ...........$32.99

(B) Nicholson Cabinetmaker’s Rasps cut evenly and smoothly. Edges are cut to allow filing narrow grooves. All are curved on one side, flat on the other. “2nd cut” is slightly coarser and faster cutting than “smooth”. 10" x 7/8". These are the smoothest cutting rasps you'll ever use. USA. Handle (G) sold separately. Cut Handle06B01 2nd cut (#49) .................M ..........$44.9906B02 smooth cut (#50) ...........M ...........$59.99

(C) Wood File. Half-round wood files are made like metal files, but have coarser teeth for use on wood. While a rasp cuts the wood with individual small teeth, this file smoothes it with a shearing action.Handle (G) sold separately.

Length Size Handle06B06 10" ...........1" x 9/32 ......... M ...........$24.99(D) Cabinet Files. Finer than regular wood files, they give a smooth, clean cut. They are half round in section and slightly thinner than our regular wood files (06B06). Handle (G) sold separately. Length Size Handle06B23 10" .......... 5/16" x 7/32" .......M ............$34.99

(E) Round Rasp. A bastard cut rasp for quick removal of stock from circular openings and for forming concave surfaces. Handle (G) sold separately. Length Size Handle06B03 10" .............3/8" dia. ......... S ............$32.99

(F) Round File. For smoothing after preliminary shaping with a round rasp. Handle (G) sold separately. Length Size Handle06B04 10" ............ 3/8" dia. .......... S .............$17.99

(G) Screw-On File Handles are easier on the hand than plain file tangs and give you added control. Finished hardwood handles with heavy steel ferrules, 41/2" to 5" long. S = small, M = medium. Size Thread Size File Length06B54 S ................ 5/16"-24 ........... 8" ............$7.9906B55 M ................3/8"-24 ........... 10" ...........$7.99

B

A

F

G

C

DE

G

Specialty Rasps(A) 4-in-1 Hand Rasp combines a fine and medium wood rasp and file in one tool! 8" long, curved on one side, flat on the other.145481 .............$10.99

(B) Sculptor’s Rasp. A versatile file-rasp combi-nation; one end fine for finishing, the other coarse for shaping. Four working sides, 2 half-rounds, 2 flat. 9" long with 3" working surfaces.06A04 ..............$39.99

(C) Keyway Rasp is two tools in one! Half is a 5/16" round rasp, the other a 1/2" flat rasp. Very useful for shaping holes or surfaces in doors, furniture, sculpture, etc. Length 83/4", coarse #2 cut.17J61 .........................................................$19.99

C AB

Files & Rasps


Belt rotates to provide fresh sanding surface.

Sanding Stick KitsNewly designed pencil-type sticks are hexagon shaped for comfort, feature thumb and finger sup-ports, and hold 1/4" x 123/4" aluminum oxide belts. The 61/4" x 1/4" sticks are made of impact-resistant plastic and have a spring-tensioned back to keep the sanding belts firmly in place or allow quick belt rotating or changing. The tapered end can be used intricate sanding while the flat side and rounded end add to the versatility of the sanding sticks.24-Pc. Standard Kit includes 4 color-coded sticks and 5 belts each in 80, 120, 180, and 240 grits.123283 standard kit ..................................$22.99

24-Pc. Finishing Kit includes 4 color-coded sticks and 5 belts each in 240, 320, 400, and 600 grits.123284 finishing kit ...................................$22.99141852 repl belts 120 grit (5) .....................$3.99141853 repl belts 180 grit (5) .....................$3.99141854 repl belts 240 grit (5) .....................$3.99

107

Woodworker’s File SetThis is a superb value for beginners and profes-sionals. We’ve selected five top-quality rasps and files then added three useful accessories: an interchangeable handle to protect hands, our heavy canvas file roll for convenient storage, and a double-sided file card and brush to prevent wood chips and fibers from clogging the file teeth. The 10" thin profile-style rasps work well in tight areas, and have cut edges for filing grooves. The 10" wood file smooths stock with a gentle shearing action.13E30 8-pc. set Save $30! ................... $104.9916T40 set of 5 files Save over $12! .........$69.99

Also available individually.16S41 1/2-round bastard rasp ................. $16.5016S42 1/2-round 2nd cut rasp ................. $17.5016V61 1/2-round smooth rasp.................. $18.9916S33 1/2-round bastard file ................... $17.5016S34 round bastard file ....................... $11.99

06D01 file card and brush .......................$16.50144947 universal file handle ................... $13.6909K32 6 pocket file roll ...........................$24.99

Our Finest ItalianHand-Cut RifflersFor sculptors and wood-car vers, these 7 1/2" rifflers are indispensable. Manufactured of the fin-est materials under the strictest quality control standards, these sets are a favorite of carvers world wide. There are eight different shapes to a set, both ends have the same shape, and cut. We offer either hand-cut rasp or file cuts. Rasps are toothed around whole end, files have one smooth side each end.

17J40 files set of 8 (A-H) Save Over $22! $149.9917J55 rasps set of 8 Save Over $22! .....$149.9917J30 set of 16 Save Over $79! ............. $264.99

Also available individually. Style File Cut Rasp Cut ea. $21.50 ea. $21.50(A) flat taper .....................17J41 .................17J51(B) flat ...............................17J42 .................17J52(C) oval .............................17J43 .................17J53(D) triangle .......................17J44 .................17J54

Style File Cut Rasp Cut(E) square ................... 17J45 ................ 17J56(F) round ..................... 17J46 .................17J57(G) half round ............. 17J48 ................ 17J59(H) knife ...................... 17J47 ................. 17J58(I) flat straight ........... 17J49 ....................N/A(J) half rnd str. ........... 17J50 ....................N/A

File Cut Profiles

Rasp Cut Profiles

JG

I

FE

CD

B

A

HRasp Cut

File Cut

WoodRiver�

Deluxe Scraper SetThis scraper features a comfortable 53/4" hardwood handle and 11/2" forward knob for fine pressure control. Unlike other scrapers, where blades are attached with a screw, the blades of this scraper are securely clamped to the cast-iron head by the machined, front handle bolt. To change blades you simply loosen the front handle, release the blade, install another blade and retighten the handle. Furnished with five blades, one straight, three con-caved and one convex in a wooden case with blade storage slots so your blades won’t get misplaced or damaged. For custom work, the blades can be easily filed or ground to match the profile of those “impossible” to scrape contours.148723 ......................................................$32.99

Carver’s RaspWhy struggle to shape curved or concave sur-faces with a straight tool when this rasp can help so much? The unique design works effectively in tight, curved areas, smoothing and shaping wood with a minimum of effort. Origi-nally used by staircase makers to smooth curved handrails, carvers and sculptors find them especially valuable for shaping their work. 1" x 41/4" x 21/2".145458 .........................................................$10.99

IWASAKI Japanese Carving FilesIwasaki files cut with surprising speed and yet leave a smooth surface due to the manner in which the teeth are milled and chemically etched. Combine that with the diagonal groove pattern and the result is a file that will cut like a plane, but with very little resistance and with the built in chip-breakers to help prevent clogging. All of the files are safe edged, allowing you to use them to adjust mortise and tenon joints like a float or to fine tune the body of a wood plane without digging into the adjacent surfaces. Suitable for all types woods or plastics, their aggressive action provides short detail strokes without compromising speed. Whether you are working on a carving, or turning a pen with the choice of a medium, fine and extra fine tooth configuration Iwasaki Carving Files offer the right file for your task at hand. 150554 (B) 150mm flat medium cut ........$17.99150555 150mm half-round medium cut $17.99150556 200mm flat medium cut ............ $27.99150557 (C) 200mm half-round med. cut $27.99150558 150mm flat fine cut .................... $31.99150559 150mm half-round fine cut ........ $31.99150560 150mm flat extreme-fine cut ...... $31.99150561 150mm half-round ext.-fine cut $31.99150562 200mm flat fine cut ....................$34.99150563 200mm half-round fine cut ........$34.99150564 200mm flat extreme-fine cut ..... $37.99150565 200mm half-round ext.-fine cut $37.99150566 (A) 110mm flat extreme-fine cut $29.99150567 110mm half-round ext.-fine cut .. $27.99

A

B

C

Scraping & Sanding


BAHCOSwedish Cabinet ScrapersThe toughness and reliability of this quality steel has been an immediate hit with woodworkers. It shapes to a keen burnished edge, and stays sharp while working the hardest stock. Available in two lengths and thicknesses. Each is 21/2" wide. Sharpening instructions included. Length Thick Each 3+

02Z08 6" ....80mm ...$9.99 .. $8.9902Z09 5" ....60mm ...$9.99 .. $8.9902Z10 set of 2 ........ $17.99 $16.19

Shavehooks ScrapeUneven SurfacesThese beau-tifully made scrapers are designed for flat, convex, a n d c o n -cave sur -faces as well as for tight corners which cabinet scrapers cannot handle -ideal for scraping paint too! The tempered steel blades, heavy shanks, and polished beechwood handles make these valuable additions to any woodworker’s bench. Length - 83/4". UK. Honing required before use.09D40 set of 4 Save $6! ... $33.9509D11 round & point ............ $9.9909D41 rectangle ................... $9.9909D31 combination .............. $9.9909D21 triangle ...................... $9.99

along the fixed bur-nishing pin gives you an even, clean cutting burr. System includes a Nicholson mill file, a 3" x 6" stainless steel cabinet scraper, and easy-to-follow instruc-tions that walk you through the sharpen-ing process. Fixture

mounts to piece of 11/2" thick stock and can be clamped in your bench vise to provide a stable working area.141025 ................................. $59.99

WOODSMITHScraper Sharpening SystemThis clever system takes all the guesswork out of sharpening and burnish-ing cabinet scrapers. The anodized extruded aluminum fixture se-curely holds a mill file and allows you to quickly and precisely shape the edge of scrapers at either 45° for scraper planes, like the Stanley #80, or 90° for handheld scraper blades. Working the scraper

LYNX Straight Scraper SetFor heavier stock removal, cleaning up glue lines, and for remov-ing paint, use this set of 3 stiff, high-grade steel scrapers. Each is 0.8 mm thick, slightly thicker than traditional scrapers, sized 6" x 3", 5" x 21/2" and 4" x 2". They’re ready for a burnishing right out of the package - no need for initial prepara-tion because they come milled to a sharp 90°. 147420 ..................................$16.50

LYNX Concave & Convex Scraper SetsOur scrapers are made of high qual-ity, tempered, .80mm steel and are ready for a burnishing right out of the package. The Concave Set (A) contains 2 scrap-ers shaped specifically to scrape curved areas such as spindles and chair legs. Scraper 1: 1/4", 3/8", 1/2", 5/8", 3/4". Scraper 2: 7/8", 1", 11/8", 11/4", 11/2". The Convex Set (B) also contains 2 scrapers specifically shaped to scrape in recesses. Scraper 1: 1/4", 3/8", 1/2", 5/8", 3/4". Scraper 2: 7/8", 1", 11/8", 11/4", 11/2".150104 (A) concave set .....$11.50150105 (B) convex set .......$11.50

A

B

Abrasive CordsPerfect for woodturning, restoration, and general sanding of any hard-to-reach or delicate work. Aluminum oxide abrasive on cloth core cords are also excellent for deburring and polishing metal. Available on 50-foot metal spools.02W32 .055" dia. ............120 grit ................... $13.9902W33 .055" dia. ............150 grit ................... $13.9902W34 .030" dia. ............200 grit................... $13.99

Non-Woven Abrasive PadsThese flex-i b l e , n o n -woven pads are ideal re-placements for steel wool. Applications range from heavy -duty cleaning to stripping, surface finish-ing and light-duty polishing. The pads are washable and reusable, can be cut and folded, used with or without chemicals, and they won’t rust, shred, or splinter. Pads are 6" x 9", available in bulk packs and an assortment. The “Grip-On” Hand Pad Holder keeps your hands away from chemicals when working with paint strippers. 146745 green #0 (20) ......... $25.50146746 maroon #00 (20) ... $23.59146747 gray #000 (20) ....... $23.59146748 white #0000 (10)... $10.99146750 hand pad holder ................ (not shown) ............ $10.99

Ol Bastard Jig Sharp ScraperA multi-purpose scraper that can handle any job. The scraper and sharp-ening jig are made from a high density molded plastic with a steel blade. The sharp-ening system takes the hassle out of sharpening by providing a nylon bush-ing which sets the blade at the perfect angle on the bastard file, resulting in a perfect edge every time. 151069 scraper-jig combo .. $49.99151070 3-pack, blades ......... $5.49

43/ 8" X 51/ 2" SyntheticSteel Wool PadsFlexible, non-woven pads are ideal replacements for steel wool for heavy duty cleaning and stripping through finishing to light duty polishing.146353 0 ............................................................$2.99146354 000 .......................................................$2.99146355 0000 .....................................................$2.99

Scrapers & Burnishers(A) LYNX Cabinet Scraper Set will leave a smooth surface without the tedium and expense of sandpaper. Available in four different styles for flat, concave, and convex shapes of varying radii. The straight is 21/2" x 5", the convex/concave is 2" x 6", the gooseneck is 27/8" x 45/8" and the double-curved is 23/4" x 51/2". Our scrapers are made of properly tempered .80mm high-quality steel.147419 set of 4 ................... $15.99Burnishers are required tools for cabinet scraper users. After scrap-ers have been squared with a mill file and fine sharpening stone, these hardened steel bladed tools turn over the thin cutting edge that make scrap-

C B

A

ers operate so effectively. We offer three basic styles, each operating in the same manner but with different blade shapes.

(B) WOODCRAFT Burnisher. Made ex-clusively for us, by Pfeil “Swiss Made” Tools, of the best tool steel. Hardened blade is highly polished to reduce fric-tion when rolling over edges. Round blade is 3/8" dia., 6" long, and requires only occasional buffing to maintain its polish. Lacquered beechwood handle.05S02 ......................................$32.99

(C) CROWN Round Scraper Burnisher. Features a polished HSS rod fitted with a comfortable rosewood handle. 71/4" blade, 123/4" overall.142576 ................................$21.99

A

Bpfeil®

PFEIL Swiss Made Burnishers From the makers of pfeil Swiss made tools. These hardened burnishers are manufactured from the highest grade steel, hardened to exacting

specifications and polished to a mirror finish polished to reduce friction when rolling a hook. The flat-tened edge of triangular version is preferred for traditional rectangular card scrapers while the oval version allows for the sharpening of radius scrapers. Blade is approximately 3/8" by 61/4". Overall length is 103/4". Natu-ral oil finished cherry handle.05B52 (A) oval burnisher $26.5005B53 (B) triangular burnisher ..... ................................ $25.99

Scraping & Sanding


GUINEVERE Sanding SystemCreate a smooth and velvety finish on wood as well as metals, plastic, bone and horn with the Guinevere Sanding System. This system of inflatable sanders adapts to the shape of your work, from concave to convex, angled or flat. The cloth sanding sleeves are long-lasting and easy to switch out.

Guinevere Sanding Kit is ideal for difficult profiles. Its dome sander is designed for round, curved, bulg-ing or cup-formed shapes while the drum sander is used on flat or convex surfaces. Kit includes (1) inflatable dome sander (23/8" x 19/16"), (4) dome sanding sleeves (coarse to extra-fine grit), (1) inflat-able drum sander (21/2" x 13/4"), (4) drum sanding sleeves (coarse to extra-fine grit), double-acting micro hand pump, and sandpaper cleaning stick. Sanders have a 1/4" shank and fit the Guinevere motor, flex shafts, and drills. Drums and sleeves are also available individually.

Guinevere Flexible Shaft with Chuck. With a maxi-mum reach of 51", this vibration-free flexible shaft, connected to the easily mov-able Sanding and Polishing Motor or other rotary power source, will allow you tremendous flex-ibility and maneuverability in most work positions.

Intended for low-speed use (3,000 to 10,000RPM), this quality Swedish flex shaft has 2 encapsulated ball bearings in the handpiece and one in the drive end for continuous work and is extremely flexible due to the double spiral steel cord in the protective tube.

Guinevere Sanding and Polishing Motor. This small and portable, extremely quiet but powerful motor is the perfect power source to use with the Guine-vere flexible shaft and in-flatable sanders. Fitted with two 3/8" chucks, this motor allows you to mount the flex shaft with a sander to one end with the other sander fitted to the remaining chuck. UL listed. Specifications: 115 Volt, 60 HZ, 1/2 HP (300 Watt), 3.0 Amp, 3,600 RPM, 6" height, 12" length, 9.5 lbs.

Guinevere Hand Pump allows you to feel the softness of the bulb while you are pumping, giving you the ideal drum softness for the grit being used. The best pressure is as soft as possible while still keeping the sleeve from moving on the drum.

147549 (A) sanding kit ......................... $116.99147550 (B) flexible shaft with chuck .... $84.99147548 (C) sanding /polishing motor $139.99 147547 hand pump ...................................$9.99147535 inflatable dome sander .............$39.99147537 dome sleeves, 60 grit (3) ............$8.99147538 dome sleeves, 120 grit (3) ..........$8.99147539 dome sleeves, 180 grit (3) ..........$8.99147540 dome sleeves, 320 grit (3) ....... $11.99147536 dome asst. pack (1 each grit) .....$9.99147541 inflatable drum sander .............$39.99147543 drum sleeves, 80 grit (4) .............$8.99147544 drum sleeves, 150 grit (4) ..........$8.99147545 drum sleeves, 220 grit (4) ..........$8.99147546 drum sleeves, 320 grit (4) ..........$8.99147542 drum asst. pack (1 each grit) .....$9.99

A C

B

ABRANET Sanding Discs And PadsAbranet® is a revolutionary new sanding material for dust-free sanding. This unique patented mate-rial contains thousands of small holes, making it possible to effectively vacuum away dust and other particles without clogging the disc surface. The result is seen in a very uniform sanding pattern and perfectly smooth surface. Since the amount of airborne dust has been minimized, the work environment is remarkably improved. This durable, long-lasting, multifunctional material is used both within the automotive and wood industries as well as on composite materials. 5" Discs (10) 6" Discs (10)147491 ... $19.99 80 grit 147501 .. $21.99147492 .... $17.99 100 grit 147502 ...$19.99147493 .... $17.99 120 grit 147503 ...$19.99147494 .... $17.99 150 grit 147504 ...$19.99147495 .... $17.99 180 grit 147505 ...$19.99147496 .... $17.99 220 grit 147506 ...$19.99

A

B

C

5" Discs (10) 6" Discs (10)147497 ..... $17.99 320 grit 147507 ...$19.99147498 .... $17.99 400 grit 147508 ...$19.99147499 .... $17.99 600 grit 147509 ...$19.99

Job Packs include one of each grit and one pad protector.147500 5" job pack .................................$22.99147510 6" job pack .................................$24.99

(A) Backing Pads are designed for maximum dust extraction on random-orbital sanders when used with Abranet discs.147511 5" Black & Decker, DeWalt ...... $36.99147512 5" Porter Cable ......................... $36.99147515 5" soft-faced pad .......................$40.99147513 6" Festool ...................................$40.99147514 6" Fein ........................................$40.99

(B) Pad Protectors protect the backing pad of your sander from wear and tear when sanding ag-gressively and continuously with Abranet. These cost-effective pad protection discs, positioned between the backing pad and the sanding disc, should be changed regularly.147518 5" pad protector (2) ................... $17.50147519 6" pad protector (2) ...................$20.99

(C) Interface Pads are used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. The interface pad is placed between the base plate of the sander and the sanding disc.147516 5" interface pad .........................$14.99147517 6" interface pad .........................$15.99

NEW WAVE Hook & LoopSandingDiscsThe new wavy-edge design of these discs overhangs the h o l d e r a n d arches around t h e e d g e to help pre-vent “dig-ins” caused by the edge of the disc contacting the surface of the wood. Made of Hi-Per Gold sandpaper which uses special lubricants on the surface of the discs to reduce loading and resin clogging, and incorporates an extremely flex-ible backing which smoothly conforms to curves.

New Wave Bowl Sanding Kit. Contains one hook & loop style sanding pad (1/4" shank), one hard and one soft interface pad, and 5 each 60, 120, 220, and 320 grit sanding pads.142960 2" bowl sanding kit .................... $51.99142961 3" bowl sanding kit ..................... $57.99

Sanding Discs in bags of 25. 2" Discs Grit 3" Discs141430 ......$9.50 60 grit 141440 ....$10.50141431 ......$8.50 80 grit 141441 ......$9.99141432 ......$8.50 100 grit 141442 ......$9.99141433 ......$8.50 120 grit 141443 ......$9.99141434 ......$8.50 150 grit 141444 ......$9.99141435 ......$8.50 180 grit 141445 ......$9.99141436 ......$8.50 220 grit 141446 ......$9.99141437 .......$8.50 320 grit 141447 .......$9.99141451 ......$8.50 400 grit 141448 ......$9.99141438 ......$8.50 600 grit 141449 ......$9.99141439 ......$8.50 800 grit 141450 ......$9.99

Interface Backing Pads are used between any standard hook & loop style foam holder and the New Wave sanding discs. Available in soft and hard, soft for finer sanding and better conformation to curves, hard for heavy sanding or sanding up to beads and corners to prevent losing their sharp definition. 149225 2" very soft pad .............................$4.99141390 2" soft pad .....................................$4.99141391 2" medium pad ..............................$4.99141393 3" soft pad .....................................$6.99149224 3" very soft pad .............................$6.99141392 3" medium pad ..............................$6.99

SORBY Hook & Loop Style Sanding Pads. Use with the Interface Backing Pads and New Wave Sanding Discs.17K70 2" foam sanding pad .................. $32.9917K71 3" foam sanding pad ...................$40.99

Abrasive Belt CleanerIncreases belt and disc life 2 to 4 times. Hold the stick firmly against a moving abrasive belt or disc until all loaded particles are removed-usually a mat-ter of seconds. Available in two sizes. 04W11 11/2" x 11/2" x 81/2" ..........................$8.9904S61 2" x 2" x 12" .................................. $11.99

Scraping & Sanding


WoodRiver® Glue Disposable SyringesHave you ever ruined expensive glue injectors after forgetting, or failing, to clean them? If you have, then we have the answer for you - disposable glue syringes. They’re inexpensive enough to throw away after every job, but durable enough to clean out and save. Perfect for placing glue just where you need it, whether it’s in dowel holes, biscuit slots or delicate assemblies. Bag of 5.148674 ...................................................... $5.99

Extra-Long Drum Sanding SetTurns your drill or drill press into a mini spindle sander. Use it to clean up band-saw marks on con-tour cuts, smooth rough edges, or sand the inside sur-faces of deep drilled holes on toys or other projects. 12-piece set contains four 1/4" shank drums, 1/2" x 2", 3/4" x 2", 1" x 2", and 11/2" x 2". One coarse (50 grit) and one fine (120 grit) sleeve is included for each drum.07P41 12-piece kit .................................$12.99128456 sanding drum, 1/2" x 2" ................ $3.99128457 sanding drum, 3/4" x 2" ................ $4.50128458 sanding drum, 1" x 2" .................. $4.99128459 sanding drum, 11/2" x 2" .............. $4.99

Replacement Sleeves. Cloth-backed aluminum oxide. Package contains 12 sleeves. Coarse Medium Fine (50 grit) (80 grit) (120 grit) Dia. x Lgth.09V12 07W43 07O41 1/2" x 2" ..........$7.9909W23 07W53 07O42 3/4" x 2" ..........$7.9909V34 08G33 07O51 1 x 2" ............ $8.9909T41 08I62 07O52 11/2" x 2" ...... $9.99

Sleeveless Sanding DrumsDrum design eliminates the need to buy replacement sanding sleeves. Simply cut and fit any type of sheet sandpaper to the drum. Drums have balanced solid cores with sponge rubber backing to ensure long wear of sandpaper. Unique pinlocking device is simple and effective. Drums can be attached to a 1/2" motor arbor or used in a drill chuck. Use on drill presses, lathes, motors, combination tools, radial saws, and portable drills. Dia. x Length x Shaft06P13 3/4" x 21/4" x 1/4" ........................... $17.9906P21 1" x 3" x 1/4" .................................$22.99124297 11/2" x 3" x 3/8" .............................$24.9906P31 2" x 3" x 1/2" .................................$24.9906P41 21/2" x 3" x 1/2" .............................$24.9906P14 21/2" x 41/2" x 1/2" .........................$26.9906P16 21/2" x 6" x 1/2" .............................$30.9906P51 3" x 3" x 1/2" .................................$25.9906P15 3" x 41/2" x 1/2" .............................$28.9906P61 3" x 6" x 1/2" ................................ $32.99

Save Money!Make Your Own

Sanding Sleeves.

Micro-Mesh Sanding Assortment PacksMicro-Mesh has been used for years to restore airline windows to optical clarity. Only recently have wood turners discovered these incredibly fine abrasives and used them wet or dry to create a polished sheen on bare wood or beautiful luster on finish coatings. Micro Mesh sanding products are ideal for use on bowls, small turnings, or pens. The Micro-Mesh Hook & Loop Disk Assortment Pack can be paired with the Sorby Sandmaster (819989) or the Sorby Micro Sandmaster (149670) for the ultimate finish for turnings and is available in three sizes. Micro–Mesh Soft Touch Pads are foam backed 3" x 4" two sided pads. Micro-Mesh Sanding Sticks are two sided pads that are smaller in size, like a nail file, for those hard to reach areas. All kits include one each of 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12,000 grits.150861 (A) 1" H&L disk assort. pack ........ $4.99150862 2" H&L disk assort. pack ............. $9.99150863 3" H&L disk assort. pack ...........$14.99150859 (B) 3" x 4" soft touch pad pack . $21.99150860 (C) 1/2" x 5" sanding stick pack..$10.99

A

C

B

Micro-Mesh Sanding KitWoodworkers have d iscov -ered that these incredibly fine abrasive cloths put a polished sheen on bare wood and a handsome luster on finish coatings. This set is ideal for pen makers with the paper sized for sanding right on the lathe! Abrasive crystals last up to 15 times longer than normal abrasives. Kit (A) includes one 3" x 4" piece of each of nine abrasive grits from 1,500 to 12,000 and a foam sanding block. Kit (B) includes two 3" x 6" pieces of each of nine abrasive grits from 1,500 to 12,000 and a foam sanding block.142940 (A) small kit ..................................$19.9911L61 (B) large kit ..................................$45.99

NORTON - Professional-Quality Belts, Discs, And SheetsTired of buying cheap sandpaper that clogs or doesn’t last? If so, now you can afford to step up to Norton professional-quality abrasives.

5" Universal Vac Hole 3X Sanding DiscsAll discs feature patented, ceramic alumina abrasive and a unique, fiber-reinforced backing. The 3X high-performance discs fit 5 and 8 hole sanders, last 3 times longer than conventional aluminum-oxide discs, are edge tear-esistant, and provide a consistent finish. 3 pack 10 pack 50 pack320 grit 146308 ....$6.50 146300 ...... $11.99 829709 ..... $39.99220 grit 146309 ....$6.50 829387 ...... $11.99 829708 ..... $39.99180 grit 146310 ....$6.50 829386 ...... $11.99 829707 ..... $39.99150 grit 146311 ....$6.50 829385 ...... $11.99 146319 ..... $39.99120 grit 146312 ....$6.50 829384 ...... $11.99 829706 ..... $39.99100 grit 146313 ....$6.50 829383 ...... $11.99 829705 ..... $39.9980 grit 146314 ....$6.50 829382 ...... $11.99 146322 ..... $39.9960 grit NA 829381 ...... $11.99 146323 ..... $39.99

Aluminum oxide, 5 per pack.146331 2000 grit ............. $4.99146332 1500 grit ............. $4.99146333 1200 grit ............. $4.99146334 800 grit................ $4.9985W10 600 grit ................ $4.9985W11 400 grit ................ $4.9985W12 320 grit ................ $4.9985W13 220 grit ................ $4.9985W14 asst. pack ............ $4.99

9" x 11" 3X Sheets These sheets offer superior sanding performance for a premium surface finish. Excellent on all surfaces and coatings. They will not clog, tear or transfer color. Aluminum oxide.Handy Packs, 3 sheets per pack.145034 400 grit ................ $5.50145033 320 grit ................ $5.50143728 220 grit ................ $5.50143727 180 grit ................ $5.50146357 150 grit ................ $5.50143726 120 grit ................ $5.50145032 100 grit ................ $5.50146358 80 grit .................. $5.50Job Packs, 20 sheets per pack.827647 400 grit ..............$11.50827646 320 grit ..............$11.50827645 220 grit ..............$13.25827644 180 grit ..............$13.25 828419 150 grit ..............$16.99827648 100 grit ..............$16.99827643 120 grit ..............$16.99146362 80 grit ................$16.99

Sanding BeltsAluminum-oxide belts for heavy stock removal, finish sanding, polishing.6" x 48" Belts, 1 per pack.146352 220 grit ................ $9.99146351 180 grit ................ $9.99146350 120 grit ................ $9.99146349 100 grit ................ $9.99146348 80 grit .................. $9.99146347 50 grit .................. $9.994" x 24" Belts, 2 per pack.146366 180 grit ..............$15.99146365 120 grit ..............$15.99146364 80 grit ................$15.99 3" x 24" Belts, 5 per pack.146368 120 grit ..............$12.50146369 100 grit ..............$12.50146370 80 grit ................$12.50146371 36 grit ................$12.503" x 21" Belts, 5 per pack.146372 220 grit ................ $8.99146373 120 grit ................ $8.99146374 80 grit .................. $8.994" x 36" Belts, 1 per pack.146378 80 grit .................. $6.50146379 120 grit ................ $6.50146380 220 grit ................ $6.501" x 30" Belts, 3 pack assortment.151251 fine/med/coarse $9.99

Wet Sand SheetsFor wet, oil, or dry sanding primer, sealer, varnish, lacquer, enamel, and other top coats.

Glue


High-Pressure�Glue�Injector�Reglues�Furniture�Without�Disassembly�Developed by a furniture restoration professional, the secret of this tool is to bore a hole as small as 1/16" into a loose joint. The injector then inserts glue with up to 600 PSI pressure for a sturdy, permanent repair. It’s also great for repairing veneers, cabinetry, musical instruments, and craft and hobby work. Supplied with 1/32" solid brass nozzle, high impact plastic body with removable plunger. 1/16" tip avail-able for higher volume application. For use with water-based glues.12P01� .....................................................$25.5012P02 extra 1/32" nozzle ............................$7.9912P03 extra 1/16" nozzle ............................$7.99

Workshop�Glue�Injector�Designed for pinpoint gluing accuracy. Accordian-style plastic body easily collapses with thumb pres-sure so glue placement is controlled. Stainless steel needle tip will not bend or close up under pressure. For detail work, forcing glue into furniture joints and cracks, or making repairs. Capacity 1 ounce, includes storage cap.02I30 2 injectors ...................................... $4.5002I40 10 injectors ..................................$19.99

QUIKWOOD�Epoxy�PuttyCombines the reliability and strength of 2-part epoxy wood repair materials in a single component. No measuring or stir-ring is necessary. Just pinch off a bit of the Quikwood “log” which contains both the filler and catalyst, and knead it with your fingers. It’s now ready to fill nail holes, dents, rebuild carv-ing mistakes, restore rotten wood voids, or reshape a decorative piece. For exterior or interior use. It can be sawed, drilled, car ved, sanded, painted, and will not shrink. Cures in just 30 minutes.17C71 neutral, 2 oz. ..................................$7.50147102 neutral, 1 oz. ................................. $4.99142517 pine, 1 oz. ...................................... $4.99142516 dark, 1 oz. ...................................... $4.99

Professional�Glue�BottleThis seamless, synthetic, 14 oz. rubber bulb is easily cleaned and provides a continuous, even flow of glue. The large metal open-ing makes refilling the bottle quick and easy. Inter-changeable brass tips to ensure long life and correct glue distribution. Bottle comes with a general, 5/32" aperture gluing tip.04H53 .......................................................$28.5004H54 dowel tip, four 5/64" apertures. ..... $4.5004H55 precision tip, one 5/64" aperture. ... $2.99

Complete�Set includes professional glue bottle, and dowel, precision, and biscuit tips.129971 .......................................................$44.99

SORBY�Hook�&�LoopBowl�Sanding�SystemHeavy-duty foam pads are flexible enough to follow the contours of your turnings and, unlike cheaper kits, are durable so they resist tearing when you use heavy grit paper. Hook and loop backing not only firmly secures the disc to the pad, but also makes grit changes quick and easy. For use with portable electric drills, maximum 1,750 RPM. Complete kit includes a 2" pad, 3" pad, and one each of 60, 120, and 240 grit discs for each size pad. 17K88 complete kit Best Value! .............$79.9917K70 2" foam sanding pad ..................... $32.9917K71 3" foam sanding pad ......................$40.99

Sanding�discs in bags of 25. 2" Discs 3" Discs17K72� ......$10.99 60 grit 17K82� ....$19.9917K73� ......$10.99 120 grit 17K83� ....$19.9917K74� .......$10.99 180 grit 17K84� ....$19.9917K75� ......$10.99 240 grit 17K85�� ...$19.9917K76� .......$10.99 400 grit 17K86� ....$19.99

Professional�Sand-O-FlexContour�SanderThis tool virtually eliminates difficult hand-sanding of irregular surfaces. The 4" diameter hi-impact plastic wheel has eight adjustable lengths of abrasive paper inside its body. As the wheel revolves, the rota-tional momentum forces the abrasive cloth flaps into irregular or curved contours. Flexible bristles located behind the sanding flaps offer support to the abrasives and follow them into the contoured surfaces. Sander has 1/4" diameter shaft for use with any drill or a bench motor with chuck adapter which operates below 2,500 RPMs. Includes one 1" wide scored aluminum-oxide abrasive roll 80 grit.06L31� .................................................... $46.50Aluminum�Oxide�Refill�Rolls06K20� 80 grit coarse ............................. $13.5006K30 100 grit med. ............................. $15.9906K40 120 grit fine ................................ $15.9906K04 extra brushes (8) ........................$17.99

SYSTEM�THREE�EpoxyThe�Best�Epoxy�On�The�Market�Today!This general-purpose epoxy system, with a complete line of additives, gained wide acceptance in the wooden boat building and repair industry, where lives depend on the quality of the adhesives used. Because of the strength of the bond, this system is especially useful for laminated applications like sled runners, structural beams, strip canoes, surf/snow boards or waterproofing and fiberglassing, cracked concrete oil well linings in Alaska, lobster tank linings, pianos, guitars, outside wooden signs and furniture. Resin and hardener are mixed in an easy 2:1 volume ratio and may be mixed with fillers for better flow control and gap filling. Included with each epoxy system is a FREE copy of System Three’s “The Epoxy Book” which covers use and application.

Epoxy�Resin is the base for all epoxy coating and gluing applications. Mix 2:1 with hardener.124520 epoxy resin, quart .......................... $26.99124521 epoxy resin, gallon ........................ $84.99Hardeners. System Three derives its name from the three different hardeners available. The hardeners may be mixed with each other to “fine-tune” the pot life and working time to suit your particular ap-plication. Hardener�#1 for use down to 35° F even under damp conditions. Pot life at 77° F is 15 min. Hardener�#2 general-purpose hardener for 60°F to 85°F, in damp or dry conditions. Pot life at 77° F is 30 min. Hardener�#3 for applications in high temperatures which require increased open as-sembly time. This hardener’s best use is as a mix with Hardener #1 or #2 to slow cure time (increase working time).124522 hardener #1, pint ....................... $22.50124523 hardener #1, quart .................... $35.50124524 hardener #2, pint ....................... $22.50124525� hardener #2, quart .................... $35.50124526 hardener #3, pint ....................... $22.50Plunger�Pump�Set screws onto epoxy containers and delivers 1 oz. per stroke for resin and a 1/2 oz. for hardener. Easy dispensing and accurate mixing! Pump fits gallon, quart, and pint containers.124533� (A) ................................................$19.99Fillers�And�Additives. The low viscosity of epoxy makes it a poor gap filler. Additives are necessary to thicken the epoxy and change its flow characteris-tics. Silica�Thickener is an extremely fine powder used to create a very smooth, non-sagging, high-strength mixture. Wood�Flour, a very fine, filtered, wood by-product is an excellent all-around filler for creating glues and structural fill-ers. Wood Flour forms a coarser “epoxy” than silica thickener. Phenolic�Micro�Balloons are hollow, purple-brown phenolic spheres that are a great low-cost, low-density filler (ideal for areas requiring sanding). Wood Flour and/or Silica Thickener may be blended with Phenolic Microballoons to prevent sagging.124527 (B) silica thickener, 90 grams ...$16.00124528 silica thickener, 14 oz. .............. $26.50124529 (C) wood flour, 1 qt. ....................... $7.99

Accessories124531 (D) 10 grad., 12 oz. mixing cups .$5.99124532 (E) mixing sticks (25) ....................$8.99

The�Best�Epoxy�On�The�Market�

Today!

D

A E

CB


Glue


WOODCRAFTLiquid�Storage�ContainersHold just about any liquid you use in the woodshop. Made of high-density polypropylene, complete with spout and tip. Great for glues, stains and finishes. Each 10+

124564 8 oz. ...........$2.50� .... $2.25124563 extra spout/tip .............$.50

TITEBONDLiquid�Hide�GlueHolds more than 3,500 lbs. per square inch. Moderate set time (usually over one hour depending on temperature and moisture) permits unhurried assembly of wood, cloth, glass, etc. Allow 24 hours for full-strength bond.146011��16 oz. ............................$12.50

TITEBOND�IIWater-Resistant�GlueWater-resistant and needs no mix-ing! It’s the first one-part glue to pass Type II water-resistant testing. Not for use under water. Freeze/thaw stable, paintable, solvent-free, and non-toxic. 08L42 8 oz. ......................$5.99��08L43 16 oz. ..................... $7.50�08L45 32 oz. .....................$9.5008L44 gallon ....................$23.99

Titebond� II�Dark�Wood�Glue. The same aliphatic resin found in Titebond II but specially formulated for darker woods. 08L46 8 oz. ..............................................$4.9908L47 16 oz. .............................................$6.50

Titebond�II�Extend�Wood�Glue. The same aliphatic resin found in Titebond II glue but formulated for slower set and longer open time. 140442 16 oz. ............................................. $7.99124512 gallon ...........................................$26.99

TITEBOND�GlueThis yellow aliphatic resin adhesive offers the fast set and handling ease of white glues, and tack-toughness-durability of hide glue. Setting time 10-30 minutes, depending on temperature and moisture of wood. Allow 24 hours for full-strength bond. Non-toxic, non-flammable. 07L41 8 oz. ............................$3.9908L21 16 oz. ..........................$5.5008L31 32 oz. ..........................$8.9908L41 gallon .........................$20.99

Titebond� Extend� Wood� Glue. The same aliphatic resin found in the original Titebond glue but formu-lated for slower set and longer open time. 140441� 16 oz. .............................................. $6.99124511� gallon. ...........................................$24.99

TITEBOND�IIIWaterproofGlueTitebond III wood glue is waterproof, yet it cleans up with water. Eight minutes of open assembly t ime and offers an application tem-perature as low as 47°F.145560 4 oz. ............................................... $4.50145561 8 oz. ............................................... $6.50145562 16 oz. ............................................. $8.99145563 32 oz. ...........................................$14.50�145564 1 gallon ....................................... $35.99

TITEBOND�Instant�Bond�CA�AdhesivesFranklin has been a leader in bonding wood and wood products for 70 years. The latest addition to their product line, Titebond Instant Bond Adhesive, has features not found in other CA glues. A two-year shelf life means your glue will last longer, triple distillation produces a superior quality product with a tensile shear strength of over 4000 psi, and a service temperature range from -65°F. to +200°F. Bottles feature no clog tips for ease of use. Available in a variety of thicknesses for multiple applications. $10.50� $21.50� $32.99 Assembly/Cure Time 2 oz. 4 oz. 8 oz.A.�Thin 5/3 sec. 149430��149431��149432��Med.��7/5 sec. 149433��149434��149435B.�Thick��10/8 sec. 149436� 149437� 149438

� $13.99�� $22.99�� $43.50C.�Gel 30/20 sec. 149439�� 149440� 149441

� $9.25�� $13.50D.�Inst.�Bond�Activator 149442�� 149443

AB

C D

Instant�Glues�Cyanoacrylate adhesives are available in a variety of formulas to handle all your bonding needs for wood, metal, leather, rubber, glass, ceramics, and most plastics.

(A)�Special� “T”�Adhesive is very thick, like mixed epoxy. It has gap-filling abilities with a slow cure for difficult alignment jobs. Like Super “T”, it is great for “fixing” cracked blanks for turning. Cure time 30-50 seconds, 2 ounces, non-toxic.08X31 ..................................................... $11.99

(B)�Super�“T”�Adhesive has the consistency of syrup and will fill small gaps between parts. . Bonding time 10-25 seconds. 2 ounces, non-toxic.08X11 ....................................................... $10.99�

(C)�Hot�Stuff Adhesive is water-thin and is used for bonding parts that fit together well. Bonding time 3-5 seconds. 2 ounces, non-toxic.08X21� �........................................................$10.99�

(D)�Super-Solvent will remove instant glues from hands, clothes, surfaces, etc. Not to be used as a thinning agent. 2 oz. 08X51 ................................ $8.99

Aerosol�Accelerator is easier to use than a pump, holds almost 4 times as much liquid and doesn’t evaporate. 6 fluid ounces, non-flammable, does not con-tain CFC’s and can be stored anywhere. 144829 ..............................$12.99

Hot� Stuff� Pro� Tips. Precision-control extension applicators attach to existing tip for pin point placement of CA glue.127821 pro tips (12) ............. �$1.9908X12 replacement nozzle & cap (2) ...... $2.5008X42 replacement spray pumps (2) ...... $2.50

B CA D

GORILLA�GlueGorilla Glue is environ-mentally friendly, 100% waterproof, will not freeze, requires no mixing, and will not expand or contract in the glue joint. Apply Gorilla Glue to one surface, so your glue lasts twice as long. Clean up with denatured alcohol, thinner or other common solvents. Gorilla Glue is 100% pure and contains no solvents or additives—you get what you pay for.

142713� 2 oz. ............................................... $4.99140350� 4 oz. ............................................... $8.50111175 8 oz. .............................................$13.9908X64 18 oz. ............................................$17.9908X65 36 oz. ...........................................$29.99

5-Minute�EpoxyEpoxies are the only adhesive to use when strong, fast bonds are required on wood, most metals, fiberglass, ceramics, concrete, glass, leather and many plastics. Use this two -part epoxy mix (equal portions of resin and hardener) for quick and easy results.124270 1/2 pint ........................................... $17.99124269 1 pint .............................................$36.99143147��syringe 1.6 oz. ............................. $11.99

Glue�Bottle�Applicator�SetThis complete set includes an 8-ounce storage bottle with storage cap, an applicator tip with cover for dowel holes, an applicator tip with cover for biscuit slots, and a 21/2" wide roller with an attached stor-age cap for flat surfaces.143566 glue bottle set...............................$13.50128927 bottle & biscuit-slot tip only ............$7.9904H52 bottle & 21/2" glue roller only ......... $8.99

Finishing


�


800�225-1153��www.woodcraft.com

113

Disposable�Glue�BrushesThese quality horsehair brushes are indispensable tools for evenly spreading glue, paste, grease or other substances found in the shop. Metal handles are 51/4" long, coated in tin plate, and are clinched to firmly hold the 3/4" long stiff bristles. Two widths, 1/4" and 1/2", are available in packs of 48 each.04Z41 1/4" width ........................................... $9.5004Z51 1/2" width .........................................$10.50

TIMBERMATE�Wood�FillerThis is wood filler as it was meant to be! Timbermate is a unique, quick-drying, water-based grain filler and wood putty that accepts stain beautifully, can be tinted, does not shrink or crack. So how is it different? It never goes bad! If it freezes put it in the microwave to warm it up. If it dries out, add some water, stir and you’re back in business. Timbermate recommends using only stainless steel or plastic tools to apply to avoid any reaction with low-grade steels that may turn the putty “black.” Even if this happens, because Timbermate is not permanent until a finish is applied, simply add water to remove the stained filler, allow the area to dry, then sand off and apply the putty again. Literally, up until the moment that finish is applied, if you’re unhappy with the result, the color or any reason at all...water it down and remove it. 841442 American cherry, 8 oz....................$6.99841443 Australian cypress, 8 oz. ...............$6.99841444 Brazilian cherry, 8 oz. ....................$6.99841445 Australian cedar, 8 oz. ..................$6.99841446 Tasmanian oak, 8 oz. ....................$6.99841447 mahogany, 8 oz. ............................$6.99841448 maple/beech, 8 oz. ......................$6.99841449 red oak, 8 oz. ................................ $6.99841450 ebony, 8 oz. ....................................$6.99841451 walnut, 8 oz. ..................................$6.99841452� white oak, 8 oz. ..............................$6.99841454 white 8, oz. ....................................$6.99148740� natural, 8 oz. ..................................$6.99148741� natural, qt. ...................................$19.99

Nitrile�GlovesProtect your hands from the solvents found in fin-ishes and stains. 100% Nitrile is unaffected by many solvents including acetone, mineral spirits and paint thinners. But don’t let their cost or thinness fool you. These gloves are tough, tough enough to be used mul-tiple times yet inexpensive enough to be considered disposable. Gloves are 4 mil thick, 100% nitrile, light blue in color with a lightly pebbled surface for better grip, and a rolled cuff. Box of 100 gloves. 148343 medium, size 7-8 ........................$13.99148344 large, size 8-9 .............................$14.99148345 xlarge, size 9-10 .........................$15.99

SYSTEM�THREE�Mirror�CoatThis pour on, self -leveling, 2 part epoxy coating is designed to create a high gloss, c l e a r , d e c o r a t i v e , super hard finish that has more depth than any other topcoat. You can actually create “float-ing” objects in your fin-ish by embedding them between coats. Perfect for bar and tabletops, de-coupage, small clocks, and crafts. Complete ap-plication instructions for an unbelievably clear, deep finish.143153 11/2 pint kit ....................................$38.50143154 11/2 quart kit .................................$66.99148352 3 quart kit ...................................$107.99

Varathane®®

Oil�Stain�Varathane® ® Premium Wood Stains use the finest pigments to highlight the grain in wood, as well as an exclusive soya-oil based formulation that penetrates up to twice as deep as other brands of stain to bring out the richness in your furniture. Sample Pack Half Pints Quarts� � $�.50�� $4.99�� $9.99natural 150332�� 150376�� 150398summer oak 150333�� 150377�� 150399golden pecan 150334�� 150378�� 150400colonial maple 150335�� 150379�� 150401traditional pecan 150336�� 150380�� 150402Ipswitch pine 150337�� 150381�� 150403spring oak 150338�� 150382�� 150404golden oak 150339�� 150383�� 150405provencial 150340�� 150384�� 150406golden mahogany�� 150341�� 150385�� 150407light walnut 150342�� 150386�� 150408light cherry 150343�� 150387�� 150409chestnut 150344�� 150388�� 150410traditional cherry�� 150345�� 150389�� 150411red oak 150346�� 150390�� 150412red mahogany 150347�� 150391�� 150413red chestnut 150348�� 150392�� 150414cabernet 150349�� 150393�� 150415American walnut�� 150350�� 150394�� 150416early American 150351�� 150395�� 150417dark walnut 150352�� 150396�� 150418gunstock 150353�� 150397�� 150419

Varathane®�Interior�Polyurethane�Oil�FinishVarathane® Interior Polyure-thane Oil provides outstanding scratch and stain resistance to keep projects looking good while imparting a rich, warm glow to your work. It’s also self leveling which means there won’t be any strokes or swirls to contend with afterwards. Available in quarts only. Each 4+150451� gloss ............................$14.99�.... $13.49150452 satin ............................$14.99�.... $13.49150453 semi-gloss ...................$14.99�.... $13.49

Varathane®®

Exterior�Water-BasedFinishA water-based, non yellow-ing Spar Varnish formulated to provide outstanding UV protection, durability and phenomenal resistance to the elements. A great outdoor finish for picnic tables, potting benches, Adirondack chairs and any other outdoor project. Easy to apply, water clean-up and quick drying. Pint Quart $13.99� $19.99gloss ......................................150443�.....150446satin ......................................150444�..... 150447semi-gloss ................................150445�.....150448

Varathane® �Interior�Water-BasedFinishFormulated to let wood’s natural beauty show through with the highest possible clarity while providing a truly durable surface with superior resistance to scratches and stains. Easy to apply, water clean-up and a fast drying time make this finish perfect for the weekend woodworker. Available in quarts only. Each 4+150454 gloss ..........................$18.99�.......$17.09150455 satin ..........................$18.99�.......$17.09150456 semi-gloss .................$18.99�.......$17.09

Varathane®®�Distressing�KitContains everything you need to sim-ulate years wear on wood. Use the Distressing Tool to easily make dents and divots neces-sary when creating the authentic, and unique, appearance of a time worn an-tique. You also get the Worm Holing Tool which is used to simulate the random pattern of insect holes. 150449 ......................................................$24.99

Varathane®

Specking�KitN o w y o u c a n create a subt le spatter effect just like a professional adding visual inter-est and a distinctive aged look to any wood project. Con-tains a special brush and three bottles of specking; light, medium and dark. 150450 .......................................................$16.99

Finishing


GENERAL�FINISHESArm-R-SealArm-R-Seal topcoats are made with only the highest quality urethane resin, mak-ing them extremely durable and long lasting. They are formulated to be “wiped on” with a cloth or applied with a foam brush, thus eliminating drips and sags. They penetrate to provide deep down protection and that “natural” look. Arm-R-Seal is available in satin, semi-gloss, and gloss. For more information visit www.woodcraft.com Pint Quart $10.99 $14.99satin .................................. 85F03�........85F08semi-gloss ................................ 85F02�........85F07gloss .................................. 85F04�........85F09

GENERAL�FINISHES�Water�Based�Dyes�General Finishes dyes are ready to use, water based formulations designed to give you deep, rich colors without raising the wood grain. These easy to use dyes can be used straight out of the can, or can be diluted with the Neutral Base or water or intermixed with General’s other water based stains and finishes to create a full palette of colors and tones. Color� Pints� Quarts�� $11.99� $16.99amber.......................................148600blue ..........................................149541cinnamon .................................148601.....150771dark brown ..............................148602.....150772ebony .......................................148603.....150773empire red ...............................148604..... 150774green ........................................149542light brown ...............................148605.....150775medium brown ........................148606.....150776merlot ......................................148607..... 150777orange ......................................148608vintage cherry ..........................148609.....150778yellow .......................................148610reducer/neutral .......................148611

GENERAL�FINISHESGel�Topcoat�and�Stains

These o i l -based Gel T o p c o a t s and Stains are quite pos-sibly the easi-est of all fin-ishes to use and achieve a “ h a n d -rubbed” look

without all the work. Application is easy with a foam brush or lint free cloth. The heavy bodied gel formulation permits the product to flow out evenly (no drips or runs) preventing uneven penetration for consistent color control. Combined with no sanding (your choice to sand or not) between coats and a quick “recoat” time, you’ll be finished sooner with less effort and better results than ever before. Choose from the colors listed below or make your own. General Finishes Gel Topcoats and Stains can be combined with each other in any proportion to create your own custom colors or to match an existing one. 1/2 Pint Pint Quart� � $7.99� $13.99� $19.99clear satin topcoat ....826989��826990��826991American oak ............826956 826957 826958antique walnut ..........826959 826960 826961brown mahogany ......826962��826963 826964candlelite ...................826965 826966 826967colonial maple ...........826968 826969 826970georgian cherry ......... 826971 826972 826973golden pine .................826974 826975 826976java ............................ 826977 826978 826979new pine .....................826980 826981 826982nutmeg .....................826983 826984 826985prairie wheat .............826986 826987 826988

GENERAL�FINISHES�Milk�PaintMilk Paints are the star of the furniture fashion market. General Finishes Milk Paints are premixed water-based acrylic paints suitable for a variety of interior or exterior applications from furniture to crafts. They can be ap-plied directly from the can or mixed with any other General Finishes’ water-based product to create any num-ber of special effects including, but not limited to, distressing, marbling, antiquing and rag rolling. Pint Quart� $12.99� $19.99�buttermilk yellow ..................825753 antique white........................825755 .........825756brick red ...............................825757 .........825758federal blue ..........................825759 lamp black ............................825761 .........825762snow white ............................825763 .........825764autumn haze ........................825765 sage green ............................ 825767 baby blue ............................. 828535 basil ..................................... 828536 linen ......................................828537 little pink .............................. 828538 millstone .............................. 828539 red pepper ........................... 828540 bayberry green .....................148932 coastal blue ..........................148933 cypress green .......................148934 outback brown .....................148935 somerset gold ......................148936 tuscan red ............................148937

��GENERAL�FINISHES��Polyurethane�&

AcrylicBlendThese finishes are the best wa-ter-based finish-es we have ever used. Formulated to resist foaming and prevent sags, they won’t run like

ordinary water-based finishes. Tack free dry time is only 15 minutes. Dry time between coats is 2-4 hours, so you can finish a project in short order. Polyurethane & Acrylic blend, PA, is the standard topcoat and is available in a convenient aerosol can. High Performance Polyurethane, HPP, contains all the characteristics of the Poly/Acrylic blend, but also a UV stabilizer to protect it from breaking down in sunlight. These are, without a doubt, the best water-based polyurethanes on the market today. Pint Quart GallonPoly/Acrylic�Blend� $12.99� $19.99� $47.99PA matte ................ 146809 ....146810�� NAPA satin .....................85T55 ...... 85T56.... 813298PA semi-gloss ..........817747 .... 817746.....816867PA gloss .................... 85T57 ...... 85T58.....812051

HPP�Perf.�Poly $15.99 $24.99 $62.99HPP satin ..................85T59 ...... 85T60.....811247HPP semi-gloss .......148414 ....148413.....148412HPP gloss .................. 85T61 ...... 85T62.....813297

Sanding�Sealer. A clear water-based sealer made from acrylic and zinc stearate that sands easily and helps build a smooth surface. The perfect foundation for High Performance Poly or Poly/Acrylic Blend.813684 sanding sealer, quart ...................$16.99

Salad�Bowl�FinishGeneral Finishes Salad Bowl Finish is non-toxic and food safe when dry. It works well for wood-en bowls, plates, cutting boards, eating utensils, and other wood surfaces that come in contact with food. It is also highly resistant to water and food stains. Salad Bowl Finish is applied with a clean soft cloth.125374 pint ...............................................$10.99125375 quart.............................................$15.50

GENERAL�FINISHES�Water�Based�Finish�Cross�Linker�General’s Cross Linker is an additive used to increase a water based finish’s adhesion and durabil-ity. Contractors have been using this technology to produce harder, more scratch resistant finishes on flooring for years. Now, this “industrial” pro-tection is available to homeowners everywhere. Just one ounce added to one quart of finish or one 4 oz. bottle to a gallon of finish. Best yet, any finished that remains unused is not wasted. Unlike solvent based cross linkers, where the used cross link/finish mixture hardens and become unusable, the effect of General’s Cross Linker’s last for 10 days and after that your finish returns to “normal” and can be used as such.149267 4 oz................................................$28.99

Enduro-Var�by�General�Finishes�When General Finishes first told us about this new water based urethane, to be honest, we were skepti-cal. However, after testing and using Enduro-Var all skepticism vanished as we realized this was not the typical water based top coat. First, Enduro-Var uses a colored urethane resin which, like oil imparts a warm glow to wood that darkens or ages over time. Second, it’s an air oxidizing, rather than a simple evaporative, finish which means exposure to air facilitates the cure. This curing process produces an incredibly tough finish that is suitable for any interior application, including floors. Combine these two winning characteristics with the ease of water based application and we think you’ll agree that there is no better finish available. If you’ve been hesitant about using water based finishes, we challenge you to cast your skepticism aside and use Enduro-Var on your next project. Pints Quarts $16.99�� $26.99Gloss� �................................... 151025�.... 151026Semi-Gloss�................................151027�.... 151028Satin� �................................... 151029�.... 151030

Cannot ship to California



Finishing


Exterior�450�Stains�By�General�FinishesWater based, exterior, pigmented stains with U.V. absorbers and mil-dewcides for maximum protection and color reten-tion. What? That’s another way of saying phenomenal colors and extraordinary, lasting protection are now available for all your outdoor projects. Picnic tables, Adirondack chairs, planting benches, trellises will all benefit from having a little added color. Exterior 450 stains may be used alone or as a top coat with Exterior 450 clear coats. General’s legendary quality – now available in colors for the great outdoors. Quart151031 natural base .................................$14.99151032 black walnut .................................$14.99151033 butternut .......................................$14.99151034 cedar .............................................$14.99151035 coffee bean...................................$14.99151036 red mahogany ..............................$14.99151037 olde cherry ....................................$14.99151038 sugar maple ..................................$14.99150039� chestnut ........................................$14.99

GENERAL�FINISHES�Enduro�Water-Based�Pre-Cat�Urethane�FinishesEnduro Water-Based Pre-Cat Urethane Finishes are professional grade products specially formulated for application by sprayer. The latest resin and cross-linking technology is utilized to provide maxi-mum toughness, durability and water resistance. Performance that's comparable to any conversion varnish or pre-catalyzed solvent-based product on the market today.Note:�Enduro Water-Based Pre-Cat Sanding Sealer must be used on new wood prior to applying Enduro WB Pre-Cat Urethane topcoats.149268 (A) sealer .......................................$24.99149272 (B) urethane qt. gloss ..................$28.99149269 urethane qt. flat............................$28.99149270 urethane qt. satin ........................$28.99�149271 urethane qt. semi-gloss ...............$28.99

BA

WATCO�Penetrating�Danish�OilsWatco, the original Danish furni-ture oil, is back! It’s rich finish is a result of a special blend of oils and resins that penetrate, seal, and preserve wood surfaces. Unlike plain linseed oils, Danish oil also contains resins which polymerize and dry in the wood and not on it. Watco finishes will not gum up in hot, humid weather. The Natural oil contains no pigments and will not color the wood. Coverage for

all Watco finishes is 200-300 square feet per gallon. Pint Quart $10.99 $14.99natural .................................. 123976� ........ 123977light walnut ...........................123978� ........123979medium walnut ....................123980� ........123981dark walnut ..........................124873� ........124875black walnut ................................................146169cherry ..................................146093 .........146094fruitwood .............................. 124874 .........124876golden oak ............................123985� ........123986red mahogany ......................146447 .........146448

WATERLOXFinishesThese p re -mium wood finishes are tung oil-based products that go on easily with a brush, lambswool ap-plicator, cloth, roller or spray. W a t e r l o x resists alcohol, hot liquids and similar problems, while sealing the wood and hardening and enhancing the wood’s natural appearance. Excellent for use on oily exotics such as teak and rosewood. For interior use, child safe when dry.37J21 quart, original sealer/finish ........$26.99146079 quart, satin, ..................................$37.99142459 quart, high gloss ......................... $34.99

Marine�finish dries to a high gloss that enhances wood’s natural patina, while protecting it from wind, sun, rain and salt spray. Original Marine Finish pen-etrates and waterproofs. Easily applied with almost any method including roller, brush and cloth.85W54 quart, original marine finish ........$39.99

Color 3 oz. 1 lb. $11.99 $26.79medium blue .......................14X31� ............14X32blue (light) ............................16Y66� ............ 16Y76brown ...................................14X11� ............ 14X12bright red .............................14X41� ............14X42wine ......................................17C22� ............ 17C23emerald green .....................17C12� ............ 17C21kelly green ...........................14X21� ............14X22black .................................. 16W43� ...........16W44

(C)� Undercoat� Adhesive. 8 oz. cans, 15 sq. ft. coverage. $11.99�Each14X61 med. blue 17H32 blue (light)14X51 brown 14X62 bright red17H42 wine 17H41 emerald green14X52 kelly green 17H31 black

Suede-Tex�Flocking�SuppliesGives a beautifully soft, velvety finish that’s far superior to felt padding and much less trouble to apply! There’s no cutting or pasting required. Simply paint on a special under coat of adhesive, then spray on the Suede-Tex fibers. They’re specially prepared rayon, dyed in rich, fade-resistant colors and cut to a uniform 1/32" length. Your finished surface will be lustrous, evenly napped and soft to the touch, ideal for lining boxes or drawers, and for coating the bases of project pieces.

(A)�Mini�Flocker is easy to use. Just put a small amount of fibers in the tube and gently pump them on to your prepared surface.127115�......................................................... $5.50

(B)�Suede-Tex�Flocking�Fibers, in eight attractive colors. 3 ounces covers about 15 square feet, 1 lb. covers about 75 square feet.

A C

B

WOODCRAFT100%�Pure�Tung�Oil�Used for centuries as both a complete finish and com-ponent in natural resin varnishes. It gives a finish that is transparent, natural, and highly resistant to water and alcohol. Unlike surface finishes, tung oil penetrates wood and hardens within. Ad-ditional coats may be added and rubbed to a high gloss. Our tung oil is 100% pure and contains no petroleum distil-lates. It may be thinned with turpentine or paint thinner.

07S21 1 pint ............................................ $12.9907S31 1 quart ..........................................$19.9907S41 1 gallon .........................................$54.99

HUT�Crystal�CoatCrystal Coat is a liquid friction finish that produces a glass like surface on wood in seconds. Apply and buff while your project is still on the lathe! A mixture of shellac and water resistant carnauba wax, just a drop finishes small turnings in seconds. Comes in a user friendly squeeze bottle for no mess, no waste application. For toys and carvings simply wipe on and hand rub or power buff to the desired luster. 6 oz. bottle.141049� ................................. $11.99

MAHONEY'S�Walnut�OilDeveloped by renowned bowl turner Mike Mahoney, this utility finish is filtered, 100% pure walnut oil. It will harden into a food safe satin finish for bowls, butcher blocks, wood utensils, and other wooden utility ware. Just wipe on or immerse and let it penetrate and harden for 24 hours, then reapply as desired. Leaves a great satin finish on all hardwoods and exotic woods. Con-tains no petroleum distillates and is completely safe for food contact after drying. 16 oz.146022 ..........................$13.50

Oil�Of�Cedar�WoodRestores the aroma of cedar lined chests and closets. Just apply to unfinished wood with a clean cloth. 100% pure oil is distilled from aromatic red cedar. Rejuvenates the wood’s odor and moth protect-ing qualities. May be used on any wood species, anywhere you want to deter insects.14Z11 8 oz. .......$18.99


Finishing


HOMESTEAD�TransFast�Dye�PowdersDeveloped by renowned furniture restorer and finisher Jeff Jewitt, these water-soluble dyes outperform any we have tried. Because the dyes contain no fillers or extenders, each 1 oz. bottle makes a half gallon or more of stain, nearly twice as much as most other dyes! Packaged in reseal-able bottles, you can use only the amount of dye necessary for the project at hand and not have to worry about the remaining powder leaking out of a paper envelope or absorbing moisture like other powdered dyes. Perfect for new work, repairs, or restoration, these deep penetrating colors can be combined to create virtually any shade without hiding the natural features of the wood. Stained surfaces can be coated with almost any type of

finish to bring out the color you’ve applied. These easy-to-use dyes come with the best mixing and application instructions we have seen. Do not store liquid dyes in metal containers.123824 dark red mahogany ....................... $9.50123821 light red mahogany ....................... $9.50123825 brown mahogany .......................... $9.50123822 extra dark walnut .......................... $9.50123823 medium walnut ............................. $9.50123826 early American maple ................... $9.50123827 light oak ......................................... $9.50123828 mission brown ............................... $9.50123830 antique cherry red ........................ $9.50

Accent�Colors. Use for decorative highlights, cre-ating pure colored pieces, or for tinting the dyes listed above for custom colors or matching hues on furniture when repairing or restoring.123836 black ............................................$10.50123833 blue ..............................................$10.50123831 turquoise blue .............................$10.50123834 scarlet red ...................................$10.50123835 cardinal red .................................$10.50123837� lemon yellow................................$10.50123832� orange ..........................................$10.50123829 dark green ...................................$10.50

TransTint�DyesDeveloped by renowned restorer and finisher Jeff Jewitt, these new dyes are more versatile than any we’ve ever seen! TransTint dyes can be mixed with water for an economical, non-flammable stain or with alcohol for a fast drying, non-grain raising stain. For use as a toner or “shader”, dyes can be added directly to water-based finishes and solvents to create a perfect match for touch-ups or a unique, customized finish. TransTint dyes can even be added to shellac, catalyzed lacquer and varnish, water-based lacquer and polyurethane, and most oil-based finishes. Not for exterior use. Each 2 oz. bottle yields about 2 quarts of dye-stain.128481 honey amber ...............................$18.50128482 golden brown ..............................$18.50128483 reddish brown .............................$18.50128484 medium brown............................$18.50128485 dark walnut .................................$18.50128486 dark mission brown ....................$18.50128490 black ............................................$18.50146956 amber ..........................................$18.50819063 cordovan .....................................$18.50819064 brown mahogany ........................$18.50821810 bordeaux .....................................$18.50821825 dark vintage maple ....................$18.50828382 red mahogany .............................$18.50128487 lemon yellow ...............................$18.50128488 bright red ....................................$18.50128489 blue..............................................$18.50828383 purple ..........................................$18.50128491 bright green ................................$18.50128492 orange .........................................$18.50

BEHLEN�Woodturner’s�FinishCreate a stunning high-gloss, wet look fin-ish in seconds. Apply and buff while your project is still on the lathe - there’s nothing easier or quicker. In fact, we regularly use Woodturner’s Finish for pen, pencil, and other small turning projects. This is the secret to producing a professional look for your handcrafted pens and pencils. 16 oz. No CA shipments.09S53� ....................................$18.99

BEHLEN�RockhardTM

Table�Top�VarnishThis top of the line natural oil and resin varnish lives up to its name. The extra hard, high gloss finish offers maximum resistance to water, alcohol, abrasion, heat, chemicals, de-tergents, and other damaging liquids. Furnished in brushing consistency, it will set dust-free in 30-60 minutes, dries in 4-5

hours depending upon conditions. For interior use only. Use Rockhard Reducer for thinning and cleanup. No CA shipments.812695 1 pint ........................................... $11.9918Z42 1 quart .........................................$19.9918Z51 1 quart reducer .............................$8.99

BEHLEN�Water-Based�Grain�FillerBehlen’s water-based grain fillers are easy to apply, and dry considerably faster than do oil-based types. The quick dry feature allows for application and final sand-ing in a single day, versus the need for at least 24 hours (and preferably 48 or more) with oil-based fillers. Wipe down must be faster, but otherwise application is very similar to oil-based fill-ers. No VOCs is another great feature. Grain fillers are needed for a really smooth finish in open-pored woods such as red oak, walnut and mahogany.818892 brown, quart .................................$18.99�818893 mahogany, quart ..........................$18.99818894 natural, quart................................$18.99

BEHLENFingerboard�OilPreserve the feel and appearance of your instrument’s fingerboard. Perfect for use on unfinished wood because it dries hard and tack free but can also be used on older instruments to rejuvenate and protect. Periodic reapplication will keep your fingerboard from drying out and in tip-top shape. 4 oz. bottle.149902 ..............................$6.99

BEHLEN�Buffer’s�Polish�#5This is an extremely fine buffing agent for application to a cured finish to create that professional, hand rubbed, high gloss or “wet” look sheen that is desirable on musical instruments. Can be applied by hand or mechanical means and is sold in pint bottles. No CA shipments. 811304� ............................ $13.99

BEHLENFinish�Rub�Not quite as fine as the Buffer’s Polish, Finish Rub is used to create or restore a cured finish to a satin sheen. This polish is for those who prefer a more subtle satin fin-ish over the high gloss look. Can be applied by hand or mechanical means. Quart. No CA shipments.149922 .......................................................$12.99

BEHLEN�Solar-Lux™The fade resistant, vibrant colors of Behlen’s Solar-Lux™ dyes are translucent to enhance the grain pattern of wood - not obscure it like pigments - plus, they’re easily applied and quick to dry, usually in 5 minutes or less depending upon application so they won’t hold your work up. If needed, they can be thinned with the Reducer and drying time increased with the addition of the Retarder. Use only with adequate ventilation and an ap-propriate respirator such as our 141623 Multi Purpose Respirator. 16 ounce bottle.

18X11 black, jet ......................................$12.9918X21 fruitwood, golden ........................$12.9918X41� mahogany, med. red ..................$12.9918X51 mahogany, med. brown ..............$12.9918Y11 red, blood ....................................$12.9918Y21 walnut, med. brown .....................$12.9918Y31 walnut, american ........................$12.99812690 blue, sea .....................................$12.99812691 brown, nutmeg ...........................$12.99812692 yellow, lemon ..............................$12.99812427 cherry��.......................................... $12.99812428 hickory .........................................$12.99146098 retarder ....................................... $11.99146099 reducer .......................................... $9.99

Finishing


MIXOL�Universal�TintsMixol Universal Tints are the most concentrated, highest quality tints on the market today. They are compatible with most water, solvent, lacquer and oil-based stains, coatings, shellacs, epoxies, waxes, varnishes, wood fillers, etc... “Ease of tinting or mix-ing” is often cited as the main attribute to Mixol, along with the “sophisticated” color palette. Mixol tints are highly resistant to heat or frost damage, and they won’t dry out or thicken (because they are binder-free) – so there is a very long shelf/shop life. Our assortment consists of 24 distinct colors, 10 of which are oxide-based (colors 3, 4, 5, 14, 19, 20, 21, 22, 23 & 24). The oxide-based colors are made from inorganic pigments which make them color-fast, fade-resistant and weather-proof. These oxide colors are ideal for exterior applications, or where UV fading may occur. Clean-up is very easy with soap and water. Mixol tints are not flam-mable or hazardous. Available in 20 ml bottles - a little goes a long way.

Mixol�10�Tone�Woodworker’s�Set�This convenient package of 10 colors can cre-ate an unlimited variety of shades. Includes the most popular colors - black, umber, brown, oxide red, oxide yellow, blue, red, camel, dark brown, white and a color chart.147216� 10 tone set .................................. $45.99� 20ml $5.50black (01) ...................................................... 832386umber (02) .................................................... 832387brown (03) .....................................................832388oxide red (04) ................................................ 832389oxide yellow (05) .......................................... 832390olive green (15) ............................................. 832400lime green (16) ............................................. 832401mustard (17).................................................. 832402camel (19) ..................................................... 832404chestnut (20) ................................................ 832405terra brown (21) ............................................ 832406tobacco (22) ...................................................832407dark brown (23) ............................................ 832408stone grey (24) .............................................. 832409white (25) ...................................................... 832410green (08)...................................................... 832393blue (09) ........................................................ 832394red (10) .......................................................... 832395fir green (12) ..................................................832397grass green (13) .......................................... 832398�oxide green (14) ............................................ 832399maize yellow (06) ......................................... 832391canary yellow (07) ........................................ 832392violet (11) ....................................................... 832396orange (18) .................................................... 832403

BRIWAX�Produces a lustrous patina, not a glossy surface shine. Suitable for use as a finish on new wood or stripped fur-niture, as a reconditioner for old or damaged finishes, as a furniture wax for fine furniture and antiques or as an antiqu-ing agent where the desire is to “age” a newly painted carving or project. Tinted waxes can be lightened or removed with the clear wax. 16 oz.85C25 clear .............................................$15.9985C26 golden oak ...................................$15.9985C27 light brown ...................................$15.9985C28 dark brown ..................................$15.99145504 tudor brown .................................$15.9985C29 antique mahogany ......................$15.99143650� rustic pine ....................................$15.99144609 ebony ...........................................$15.99844335 dark oak .......................................$15.99844336� teak ..............................................$15.99844337 0000 steel wool 225gm .............$10.50

BeeswaxWhile raw beeswax is an often used ingredient in homemade, custom wax polishes, it is also an ex-cellent, light lubricant for wooden moving parts such as drawer slides or wooden bench screws. Screws lubricated with beeswax drive easier in hard woods, and beeswax will not attract or hold moisture! Sold in convenient 1/2 lb. cakes.08A70 white beeswax 1/2 lb. .................... $12.9908A71 yellow beeswax 1/2 lb. .................. $12.99

Carnauba�WaxThis high quality, white wax is the preferred choice of cabinetmakers. Often dissolved and combined with other softer waxes, carnauba produces the extremely durable and high gloss characteristics of prepared waxes. Sold in convenient 1/2 lb. cakes.08A75 ...................................................... $19.50

MYLANDS�Finishing�ProductsFor well over a century, My-lands has been producing high quality finishes with a difference – shellac is the prime ingredient. Long valued for its hardness and tremendous sealing proper-ties, shellac’s versatility allows it to be used to add warm tones to country furniture and high gloss when French polishing.

High� Build� Friction� Polish. The most impressive turner’s polish we have ever used. It builds quickly, drying almost instantly, complementing the natural beauty of the wood. When used without a sealer, a smooth sheen results. When used with Mylands Cellulose Sealer, a brilliant high gloss finish is easily attained. 500ml bottle.813772 .......................................................$19.99

Cellulose� Sanding� Sealer. A lacquer-based clear sealer and finish that dries to a soft sheen. It is spe-cially formulated to work with any Mylands finishing product or by itself. A brilliant high-gloss finish can be achieved on turnings when used in conjunction with High Build Friction Polish; a rich matte finish when the waxes are used. This product does not contain shellac. 500ml bottle.814153� ........................................................$17.99

Waxes. A unique formulation of the finest natural waxes (shellac, beeswax, and carnauba) in a toluene and xylene-free carrier. Can be used over virtually any finish to accentuate and protect. Applies easily and yields a lasting and lustrous shine. 16 oz.813765 clear .............................................$15.99813767 antique brown .............................$15.99

RENAISSANCE�WaxPreferred by museums worldwide for protecting furniture, leather, marble, paintings and metal, this special blend of micro-crystalline waxes will not stain or discolor with aging. It is acid neutral, water and alcohol resistant. . 200ml, 7 oz.08G22� ...........................$29.99

ANCHORSEAL�2�–�The�Next�Generation�Of�Anchorseal®®For nearly 30 years, Anchorseal® has been the sealer of choice for Lumbermen, turners and furni-ture builders alike to protect their wood investment. Anchorseal 2 is a hybrid sealer that contains renewable, natural ingredients so there is less petroleum based material used in its production for a greener, more economical product that drips less, sticks better, has improved stability and, best yet, better than the original Anchorseal®. Now, new and improved Anchorseal 2 is the choice for prevention of end grain checking.150808�quart .............................................$10.99150809�gallon ........................................... $21.99

Brooklyn�Tool�&�Craft�Shellac�Flakes�Imported from India,BT&C Shel-lac Flakes are de-waxed, small, uniform flakes that dissolve easily in alcohol. This is standard shellac and great for most application from sealer to finish. Available in 1 lb., re-sealable bags. 150852� Blonde ...............$24.99150853 Garnet ...............$24.99

Brooklyn�Tool�&�Craft�Tiger�Shellac�FlakesImported from Germany, BT&C Tiger Flakes are a cat of a different stripe…..we know, a bad pun, but appropriate. Tiger flakes are highly refined, de-waxed flakes of irregular size, looking more like shard of glass than simple flakes. This is the shellac for any application – French Polishing, sanding sealer, fine furniture finish-ing or finish restoration for antiques. This is simply the finest shellac we’ve seen. Available in 1 lb., re-sealable bags. 150854 Super Blonde ................................$42.99150855 Blonde ........................................... $37.99150856 Amber ............................................$34.99150857 Garnet ...........................................$34.99

Brooklyn�Tool�&�Craft�Pure�Anhydrous�AlcoholThe finest, purest shellac solvent available. Quarts only.150858 .......................................................$14.99

Finishing


EARLEX�HVLP�Spray�Station�3500The Spray Station 3500 is the ideal HVLP system for woodworkers and DIYer’s alike. The 500 watt turbine is powerful enough to spray latex paint, but is also able to lay down a fine finish on an heirloom. The secret of the 3500 is the new Expert Control spray gun, which offers a fast 3 pattern changing system, thumb control flow dial, angled pick up tube for overhead or downward spraying and front loading needles that make changing and cleaning a snap. The 3500 comes with a 9' air hose and 7' power cord. Kit includes turbine, air hose, power cord, Expert Control spray gun, 2.0mm stain/latex tip and 1.5mm fine finish tip, viscosity cup, needle/tip tool, instruction booklet, quick start guide and a How-To DVD.150851 .....................................................$149.99

EARLEX�HVLP�Spray�Station�ProQuickly achieve an expert finish - with no brush marks - with the Spray Station 5000 high volume, low pressure (HVLP) sprayer. Designed for woodworkers and DIY enthusiasts, this professional unit is fitted with a powerful two-stage turbine that supplies the gun with constant airflow, allowing the material to be distributed evenly despite varying viscosities. An adjustable aircap creates different spray patterns while maintaining minimal overspray. The Spray Station 5000 is ideal for use in the workshop or home – the light-weight unit has a long carry handle for easy mobility and provides storage for the gun, 13' air hose and 51/2' power cord. The metal spray gun is compatible with nearly all finishing materials and the 1 quart Teflon coated paint pot is easy to clean. Includes 2.0mm (latex) and 1.5mm (water or oil based stains, varnish, shellac) stainless steel needles and fluid tips, viscosity cup, spray gun cleaning kit and detailed instructions.147650 .................................................... $339.99148524 1.0mm needle kit .........................$49.99148525 2.5mm needle kit .........................$49.99148526 1 qt. replacement pot ..................$39.99

Spray�Gun�Cleaning�Kit is available separately.147658 .......................................................$14.99

EARLEX�Spray�Station�HV6900Earlex HVLP systems combine extraordinary per-formance and value. The new HV6900 continues that tradition - a commercial grade system at a DIY price. Powered by a 3-stage 1100W Ametek Turbine rated at 5 psi and 71 cfm, this new Earlex has the muscle for big jobs and the finesse for small ones. No finishing job is too large or small. You’ll find yourself not only using it for all your finishing needs but you’ll also be painting with it as well. Features include 3 spray patterns - horizontal and vertical fans plus detail; “Push N’ Click” system to change patterns and an adjustable fan width from 1" to 12". Comes with a 2.0mm stainless steel needle, 13' air hose and a two- year manufacturer’s warranty. 149708 .................................................... $499.99�

Accessories 148524�1.0mm needle kit ........................$49.99149726� 1.5mm needle kit ........................$49.99148525�2.5mm needle kit ........................$49.99148526�1 qt. replacement pot ..................$39.99

WoodRiver®�HVLP�Spray�GunsIf you own a compressor, there really isn’t a cheaper or faster way to start spray finishing than this! These self-regulated, gravity-fed HVLP spray guns work right off your compres-sor. Both guns feature stain-less steel needles and nozzles as well as adjustments for air, fluid and pattern. So simple to operate, they’re almost “plug and spray,” and they offer the advan-tage (because they are powered by an air compressor) of being powerful enough to spray a broad range of material. The�WoodRiver®�Pro�HVLP�Gun is a full-sized gun with a 1/4®" air inlet and large capacity for big jobs. Comes with a 1.4 mm nozzle and 600 cc plastic cup. 28.8 - 51 psi recommended air pressure, 4.2 - 7.1 cfm Average Air Consumption, 7.1" - 9.8" Pattern Width at about 6"-7" from surface. The�WoodRiver® Mini�Pro�HVLP�Gun is a smaller gun with 1/4®" air inlet and smaller capacity. Perfect for touch ups and smaller projects like boxes or crafts. Comes with a .8 mm nozzle and 120 cc plastic cup. 21.6 - 43.2 psi recommended air pressure, 3.5 - 6.0 cfm Average Air Consumption, 4.3" - 6.1" Pattern Width at about 6"-7" from surface. 149388� (A)�WoodRiver® Pro spray gun�..... $34.99149389� (B) Pro 1000cc alum. paint cup�... $�7.99149390� (C) Pro 600cc plastic paint cup�... $�3.99149391� Pro 2mm needle kit�..................... $10.99149392� Mini Pro spray gun .......................$29.99149393� Mini Pro 150cc st. steel cup ......... $�4.99149394� Mini Pro 120cc plastic cup�........... $�2.25149395� Mini Pro 1.5mm needle kit�............ $�7.99

A

B

C

Finishing: A To Z With Charles NeilDVDThis 10 DVD collection i n c l u d e s : B u i l d i n g -t o F i n i s h - S a n d i n g & Smoothing; Preparing to Color-Repairing Defects; Color ing Wood - Dyes and Stains; Controll ing Color; Advanced Coloring Techniques; Spray Guns & Turbines; Spray Techniques; Spraying Top Coats; Hand Applied Finishes; Special Finishing Tech-niques. Over 13 hours total.149067 DVD set ...................................... $134.99

Finishing�TurntableFinishing generally requires walking around your project, applying finish to each section as you go, which can open the door for opportunities to spill, drip or splatter finish. As much as we hate to admit it, each one of us has been there, done that! With the Finishing Turntable you will never have to make this admission again. Simply position your project on the rotating table and “spin” the piece as you finish. No walking means less opportunity to create a mess. A nice side benefit is the discrete positioning you can achieve with the turntable. Turn the table so that your finished surface aligns with a light source to better identify areas where you missed on your finishing first pass.150649 .......................................................$39.99

Painter’s�PyramidSave time by applying finish to an entire project (top, bottom and sides) without having to wait for the finish to dry. Painter’s Pyramids are made from non-stick material that is impermeable to paints and solvents with rounded tips that will not leave a mark on the wood or the previously applied finish. Simply apply finish, flip your workpiece and apply finish on the opposite side. Package of 10.151238 .........................................................$5.99

It's all About Color With Charles NeilDVDSit back and learn as Charles takes you through the process of selecting, preparing and achieving the best possible color out of six of the most popular woods, Cherry, Oak, Maple, Walnut, Poplar, and Mahogany. Includes recipes for achieving color with water-based dyes and stains and instruction on choosing secondary woods for projects that blend beautifully with the primary wood of choice. Run time is 6 hours.151235 6 DVD set ......................................$79.95

Hardware


Combi-Bolt�Indoor or outdoor door bolt with a twist…a 4-number cam combination mechanism built right in. No keys to misplace! But, is it secure? You bet! User settable combination has over 10,000 possibilities. Perhaps best of all, this is the ultimate lock for keep-ing the “tykes” out of your shop, lawn shed or other potentially dangerous areas. Includes 6 mounting screws. For enhanced security, mount with bolts (not included).151133� chrome (shown) .... $25.95151134� black ...................... $25.95

China�Bristle�BrushesShop�Pack�Of�36Great brushes for applying glue, stains, or general shop use. Eco-nomical enough to throw out when you finish. The Shop Pack includes 12 each of 1", 11/2", and 2" brushes with unfinished wooden handles. 147276 .................................. $16.50

Economical�Quadrant�HingeGreat for small jewelry boxes or humidors. Gold-plated hinge has 5/16" wide leaves with a 11/4" hinge pin and 111/16" leg. Mounting screws included, sold in pairs.126965 ................................ $10.50

Humidor/Jewelry�Box�LockThis hand-s o m e lock set is made from a combi-nation of brass and p l a t e d steel with gold plat-ing. Its slim design and low profile is easily mor-tised into small boxes and chests. Escutcheon plate, lock bolt and key are also gold-plated. Escutcheon is 3/8"W x 29/16"L, body is 1/4"W x 13/4"L x 11/8" deep.125589 ................................ $42.99

Small�Box�LocksPerfect for jewelry and trinket boxes, the half-mortise design allows instal-lation of locks into thinner stock. Case is brass with steel mechanism. Case A is 44mm long x 18mm wide x 5mm thick. Case B is 44mm long x 22mm wide by 7mm thick. Case C is 51mm long x 24mm wide by 7.5mm thick. Each lock includes catch plate and one brass key. Screws not included. Case Screw Size27D41� A .......... #1 ............$12.9927D42� B .......... #2 ............$11.9927D43 C .......... #2 ............$12.99130344 extra key for (A, B) $1.99130393 extra key for (C) ...... $1.99

A

C

BChest�And�Cabinet�Locks�(A)�Full�Mortise�Chest�Lock. Mortise size is 5/16" W x 2" L x 15/8" D. Lock Plate is 3/8" x 31/8". Strike and escutcheon are brass plated.130261 ................................$11.99

(B)� Surface� Mount� Cabinet� Lock. Overall size is 15/8" x 1" x 3/8". Brass plated, includes escutcheon.130259� .................................. $6.99

BA

Box�Side�Rail�HingesA great addition to our box and humi-dor hardware selection, these hinges are machined from thick solid brass, polished and coated with protective “gold-tinted” lacquer. This coating as-sures that your hinges will stay bright and beautiful for years to come. Side Rail Hinges are machined from 7/64" thick brass, are 5/16" wide and 11/2" long. These hinges stop at 95° and are designed for medium-duty applica-tions. The Side Rail Hinges With Stays also stop at 95°, are machined from 5/64" brass, are 5/16" wide, 2" long and let you use a heavier top. Both hinges mount with #2, 3/8" brass-plated steel screws (included) which are coated with the same finish as the hinges. Sold in pairs. Each Pair126434� hinges .................... $36.99126435� hinges w/stay .........$37.50

Antique�Solid�Brass�Miniature�Hardware�A select offering of Stanley National solid brass miniature hardware in an Antique Brass finish. Quality solid brass hardware antiqued for that muted, subdued look. Mounting hardware included. Hinges�� pair 3+150647 (A) 3/4" x 5/8" $2.99� $2.69150646 (B) 1" x 3/4" ... $3.50��$3.15�150645 (C) 11/2" x 7/8" $3.99� $3.59Hasp150536 (D) 5/8" x 17/8" (A, B) ............ ...................... $2.99� $2.69149752 5/8" x 17/8" bright brass ...... ...................... $3.99� $3.59

A B C

D

Chest�Straps�Solid Brass, bright finish. Sold in pairs. Dimensions Each 4+127389 (A) 2" x 3/4" .. $7.50 ...$6.75Chest� Corners.� Solid Brass, bright finish. Sold in pairs.127393 (B) 2" x 3/4" $13.50 ..$12.15

A B

SolidBrass�KnobsProvide a touch of c l a s s i c quality to any piece of furni-ture. Polished and lacquered finish. Supplied with dowel screw for secure, easy installation. Diam. Height Each 10+02U21� 3/8" ... 5/16"......$4.99 .... $4.4902U22� 1/2" ... 7/16" ....$6.50 .... $5.8502U23� 5/8" .... 1/2" .....$6.99 .... $6.3002U24��3 /4" .. 9/16" .... $7.99 .....$7.19

Solid�Brass�Wood�ScrewsHigh quality flathead slotted screws in boxes of 100.16I35 No. 1 x 1/2" ................... $7.9916I11 No. 2 x 1/2" ................... $7.9916I26 No. 2 x 5/8" ................... $7.9916I12 No. 4 x 1/2" ................... $7.9916I27 No. 4 x 5/8" ..................$9.9916I13 No. 4 x 3/4" ..................$9.9916I28 No. 5 x 5/8" ................ $11.9916I14 No. 5 x 3/4"................. $11.9916I29 No. 6 x 5/8" ................$12.9916I21 No. 6 x 3/4".................$12.9916I22 No. 6 x 1" ...................$13.9916I30 No. 8 x 5/8" ................$13.9916I23 No. 8 x 3/4" ................$16.9916I24 No. 8 x 1" ................... $17.99

Star�Wiping�Washed�Jersey�Knit�RagsThe definition of a great wood work-ing shop rag is one that is made from a soft and highly absorbent mate-rial. A soft, absor-bent cloth not only attracts liquids, but also “releases” the liquid when needed. The releasing characteristic of a good shop rag is important when applying stains and finish. Wiping Washed Jersey Knit Rags are not cut up T-shirts, or cut up clothes of any kind, but were raised to be nothing but the finest shop rags. Star Wiping rags are made from a cotton blend - spun, woven, processed and boxed in the USA. Whether you are applying stain or finish, polishing, or wiping up coffee spilled on your workbench, you will be impressed with these shop rags.152652� 1 lb ......................... $6.99150924� 4.5 lbs .................. $24.99�150925� 8.5 lbs (shown) .... $34.99�


BA

Ball�Catches(A)� Bullet� Catch. Light duty. Brass-plated steel. Includes strike plate brad. Bag of 10.27H37 1/4" diam. ..................... $9.99(B)�Adjustable�Ball�Catch. Medium to heavy duty. Solid brass extrusion. Two side screws set spring/ball tension on catch release. For straight-on or side latching. Screws included. 111/16"L x 5/16"W. Each 10+ Each27H39 ...................$3.50 ....... $3.15

Combi-Cam�Standard 3/4" cylinder lock for use on material up to 7/8" but in-stead of keys, uses a 3-number cam combina-tion mechanism. Easy to install, easier to use and secure with over 1000 possible user settable combinations. Use on guns cases, RV’s, trailers and cabinets of all sorts. Includes 1 each of the following cams; 3/4" straight, 11/2" straight and 11/2" offset. 151131 chrome .................. $15.99151132� black ...................... $15.99

Hardware


Drawn�Brass�Cabinet�HingesCustom designed cabinetry naturally deserves the finest solid brass hinges. Our brass hinges are individually machined to provide smooth operation. Mounting screws not included. Brushed Satin Finish. Hole patterns on Back Flap hinges vary by hinge size.

BA

A

Dimensions Screw A B C D Size Per Pair(A)�Box�Hinges.16Q11� ............ 1" ............. 5/8" ........... 1/4" ...........1/16" ........... #1 ...........$14.9916Q21� .......... 11/2" ........... 3/4" ...........5/16" ...........1/16" ...........#2 ...........$14.99

(A)�Broad�Cabinet�Hinges.16Q22� .......... 11/2" ........... 7/8" ............ 3/8" ...........5/64" ...........#4 ...........$15.9916Q32� ............2" ............ 11/8" ..........7/16" ...........3/32" ...........#4 ...........$15.9916Q41� ..........21/2" .......... 13/8" .......... 1/2" ...........3/32" ...........#6 ........... $17.99

(A)�Full-Size�Cabinet�Hinges.16Q42� ............2" ............ 11/4" .......... 1/2" ...........3/32" ...........#6 ...........$21.9916Q51� ..........21/2" ......... 11/2" .......... 5/8" ...........7/64" ...........#8 ........... $27.9916Q52� ............3" ............ 17/8" ........... 3/4" ...........7/64" ...........#8 ...........$31.99

(B)�Back�Flap�Hinges.16Q61� .......... 11/4" .......... 17/8" .......... 13/16" ..........5/64" ...........#6 ...........$19.9916Q62� .......... 11/2" ..........23/8" .........11/16" ..........3/32" ...........#6 ...........$19.9916R12� ............2" .............. 3" ........... 13/8" .......... 1/8" ............#8 ...........$35.99

(A)�Polished�Cabinet�Hinges. Complete with screws. Dimensions A B C D Per Pair16R49� .... 21/2" ....21/2" ......11/16" .... 3/32" ....$25.9916R50� ...... 3" ........2" ..........7/8" ...... 3/32" .....$25.9916R57� .... 21/2" ......2" ..........7/8" ..........3/32" .....$24.9916R58� ...... 2" ........2" ..........7/8" ...... 3/32" .....$22.9916R59� ...... 2" ......11/2" ........5/8" .......1/16" .....$19.9916R60� .... 11/2" ....11/2" ........5/8" ...... 1/16" ....$16.99

BRUSSO�Precision�Hardware

A

BRUSSO�Small�Box�Hardware�Brusso Incorporated was originally founded by a custom cabinet and furniture maker who was frus-trated with the low quality of hardware available. By designing and manufacturing a product that met his own expectations, all woodworkers benefited. Even though Brusso hardware is made by Nanz Custom Hardware in their New Jersey factory today, each piece is still precision machined and the high copper content, solid brass stock has that original Brusso luster. Only premium quality components like stainless steel hinge pins, balls and springs, are used in production. Traditional styling and elegant lines of each piece are designed with the discerning craftsman in mind. Like its predecessors, this new line of Brusso Small Box Hardware is made from the highest quality materials and is sure to please.

Brusso�Decorative�Brass�Small�Box�Feet�The MC-444 has a leg with cove profile, straight collar, and pad foot, is pressure-fit and glued into place. Foot measures 1/2" in diameter and projects 15/16". The mounting tenon is 3/8" in diameter. Sold in packages of 4.150792� (A).................................................$13.99

The JB-755 has a modern straight-sided disk and projecting brass dowel that is pressure-fit and glued into place. Foot measures 1" in diameter and projects 1/8". The mounting tenon is 5/8" in diameter.150793� (B) ................................................. $17.99

The HD-702 has a square base with a radius, inner corner and an inset block foot. The base is mortised into the bottom of the box and fastened with two screws. Foot measures 7/8" x 7/8" with an overall thickness of 1/4".150794� (C) ..................................................$20.99

The JB-426 features a compressed sphere and spac-ing collar with a turned profile that is pressure-fit and glued into place. Foot measures 3/4" in diameter and projects 9/16". The mounting tenon is 1/2" in diameter.150795� (D) ..................................................$25.99

Brusso�Small�Box�Decorative�Brass�Knobs feature a flattened dome face, ringed by a band-shaped edge. Knobs are pressure fit and glued into place. Package contains one knob.

The MC-422 measures 5/16" in diameter and projects 5/16". Mounting tenon is 3/16" diameter.150796� (E) ....................................................$3.99

The MC-428 measures 3/8" in diameter and projects 7/16". The mounting tenon is 3/16" diameter.150797 (F) ....................................................$4.50

The MC-432 measures 1/2" in diameter and projects 9/16". The mounting tenon is 5/16" diameter.150798� (G) ....................................................$5.50

Brusso�Small�Box�Brass�Jewelry�Hooks are pressure fitted and glued into place. Each package contains one hook.

The MC-510 spinning hook has six radial arms and mounts on the upper surface of a cabinet’s interior. The overall diameter is 15/8" and projects 11/8". The mounting tenon is 3/8" in diameter.150799� (H) ................................................ $31.99

The MC-437 has a flattened dome face ringed by a band-shaped edge. Hook measures 3/8" in diameter and projects 5/16". Mounting tenon is 3/16" in diameter.150800� (I) .....................................................$4.99

Brusso�Small�Box�Brass�Quadrant�HingeThe HD-638 is engineered with a built-in stop that allows a lid to remain open at 95°. The arc is mortised into the side of the box, beneath the leaf. Each leaf measures 1" x 1". Sold in pairs.150801� (J) ...................................................$40.99

Brusso�Small�Box�Brass�Bullet�CatchThe BC-265 mortised ball catch, consists of a brass cylinder with spring-loaded steel ball and a brass keeper and is used to secure cabinet doors. The grooved sides of each half measure 11/32" in diameter, and provide both a “grip” when mounted and a reservoir for glue. Package contains 1 catch.150802� (K) ....................................................$9.50

CB ED

G

F

IH KJ

Precision�Knife�Hinges. Straight hinges for overlay doors, offset L- hinges for flush-mounted doors. Use 5/16" wide hinges for small doors up to 12" x 24" and 3/8" hinges for medium doors up to 24" x 36". Screws included. Style W x L Per Pair145288 knife 5/16" x 15/16" ...........................$15.50145289 knife 3/8" x 13/4" ..................... $19.50145290 offset 5/16" x 13/8" .................... $23.50145291 offset 3/8" x 13/4" ..................... $28.50

Precision�Box�Hinges�feature rectangular knuckles which stop the lid in a vertical position so it won’t drop back. Hinge pins are precision-ground tool steel, with pin boxes that are first drilled, then reamed, for stain smooth fit and operation. Use in boxes of all types and small doors where the opening angle won’t exceed 100 degrees. Screws included. Min. Stock L x W Closed Thickness Leaf Thickness Per Pair145286 3/4" x 1/2" ............... 5/16"..................3/32" ............................$22.99145287 11/4" x 5/8" ...............7/16" ..................3/32" ............................$29.99

Jewelry�Box�Feet are the finishing touch on a finely crafted box. Install by gluing feet into a 5/16" diameter hole, 1/4" deep. Feet measure 9/16" total height, exposed foot height 3/8". Solid brass. 145296 set of 4 ...................................$12.50

Brass�Bullet�CatchesBullet Catches gently hold cabinet doors shut. Spring loaded balls align and index on strike plates. Light and medium duty. Milled from solid brass with stainless steel ball. Install easily. Sold individually. Size Each145292�1/4" dia., light duty .................................. $7.50145293�7/16" dia., med. duty ............................ $11.50

Hardware


Table�HingesDesigned specifically for drop-leaf tables with rule joints. Extra-wide plates clear the hollows over the rounds on the molded-edge joints when the leaves are moved up into position. Drawn brass hinges are manufactured with brass pins. Screws not included. L x W Open Screw Size Per Pair16R41 21/8" x 11/4" ...No. 6 ...$29.5016R42 27/8" x 11/2" ...No. 6 ... $27.99

Table Hinge Installation

Butler’s�Tray�and�Table�HingesSolid Brass Butler Tray Hinges lock in their flat position and hold vertical at 90° with a snap. Matte brass finish, screws not included. L x W Open Screw Size Per Pair130632 (A) 3" x 11/2" .. #6 ..$15.99130633 (B) 21/2" x 11/2" #5 $15.99�

Solid�Brass�Table�Hinges. Pair of solid brass hinges. Opens 180°, closes flush. Satin brass finish. Screws not included. L x W Open Screw Size Per Pair130634 (C) 23/4" x 13/16" #6 ..$11.99130635 (D) 3" x 1/2" ....... #6 .....$7.99

A B C D

Round�Hinges�With�StopsAdd a touch of elegance to your next box project with these unique solid brass hinges. Formed from heavy brass stock that is polished then lacquered, these definitely are eye-catching. Measuring 35mm in diameter, they are designed to drop tightly into a 35mm Forstner bit hole, but can also be surface mounted. Includes a pair of removable stops which, when mounted on the hinge, limit the opening to about 95°. Includes six oval head screws (two are 5/8" long to accommodate the extra thickness of the removable stops). Leaf thickness is .09". Sold in pairs.129713� ................................$42.99142511 35mm Forstner bit $21.99

Miniature�Barrel�HingesMake your o w n p e n , penc i l , o r other small c a s e s o r boxes with these miniature barrel hinges! Preci-sion 5mm diameter hinges are made from solid brass and feature smooth operating, finely machined mecha-nisms. Bags of 10.06R91 ...................................$7.995mm�Brad-Point�Bit146614�� .................................. $2.99

Non-Mortise�Invisible�HingesEasy hinges to install – just drill the proper size hole, tap the hinge in flush and tighten the locking setscrew to expand the body of the hinge tightly in the hole. Solid brass with brass plated steel linkage. 180° opening.

Non-Mortise�Hinge for panels 1/2" thick. Requires 10mm mounting hole.27C11 ............................ ea.�$5.99

Non-Mortise�Hinge for panels 3/4" thick. Requires 14mm mounting hole.27C12 ............................ ea.�$6.99

Drop-Leaf�HingesSpecifically designed for use in the

Barbed�HingesThese inexpen-sive box hinges are easy to install. Just cut a slot with the appropriate thin kerf blade on a drill press and push the barbed hinge in the kerfed slot. What could be easier! The result is a nearly invisible hinge. 11/8" hinge uses .036" blade, smaller hinge uses .025" blade. Arbor has a 1/2" shank. Hinge Per Pair141588 11/8" x 7/8" ................. $2.50141589 7/8" x 9/16" .................. $2.50

Saw�Blades141591 .025" kerf ...............$22.99141592 .036" kerf ...............$22.99141590 saw blade arbor ....$26.99

SOSS�“Invisible”�HingesIdeal when a flush, smooth surface with no visible hinge is required. Hinges are brass-finished zinc, open a full 180°, and have a laminated link construction that reduces friction for smooth operation. Installation instruc-tions and mounting screws included. For light load-bearing applications.

Invisible�Hinge for wood 3/4" or thicker. Use larger hinge for longer, wider applications. W x L of Plates Per Pair06B44 1/2" x 13/4" ...............$23.19140472 1/2" x 23/8"............... $25.29

Invisible� Hinge for wood 1/2" to 5/8" thick. Smaller hinge is perfect for boxes and small cabinets; larger hinge for all other applications.03H33 3/8" x 1" ...................$23.19140471 3/8"x 111/16" .............$25.29

Non-Mortise�Hinges(A)�Cabinet�Hinges. Requires no cutting of butt mortises, just screw hinge to door and jamb. Heavy-gauge steel with statuary bronze finish. Sold in pairs with mounting screws. W x L Closed Each Pair27G11 5/8" x 15/8" ................ $1.9927G12 11/16" x 2" ................. $1.9927G13 13/16" x 27/16" ............ $1.9927G14 1" x 3" ...................... $3.50(B)� Cabinet� Hinges� With� Finials� in hand-rubbed brass, antique brass or silver finish. Sold in pairs with mount-ing screws. Size Finish Per Pair130552 7/8" x 2" ........HRB ... $4.99130549 1" x 21/2" .....HRB ... $4.99130551 7/8" x 2" ......... AB .... $5.50130548 1" x 21/2" ...... AB .... $5.50130553 7/8" x 2" ...........S ..... $5.50130550 1" x 21/2" ........S ..... $5.50(C)�Double-Action�Hinges.For 3/4" or 11/8" thick panels, swings either direc-tion. Polished brass or statuary bronze finish, includes mounting screws. Panel Finish Per Pair 10+

27G33 3/4" ......PB .....$4.99 ... $4.5027G34 11/8" ....PB .....$4.99 ... $4.5027G31 3/4" ......SB .....$4.99 ... $4.50

A B C

Pewte

r�

Ster

ling

Nick

el

Polis

hed�

Bras

s

Solid

�Br

ass

Antiq

ue�

Engl

ish Dark�

Engl

ish

Minaret�TipsBall�Tips

AMEROCK�Full-Inset�Cabinet�HingesAmerock hinges are as strong as they are beautiful. They’ll give you the close-fitting decorative look of a traditional inset-style door without the hassles and confusion of mortis-ing the door or door frame. These full-inset hinges feature both minaret and ball tip styles and come in six popular finishes, Sterling Nickel, Antique English, Polished Brass (plated steel), Solid Brass, Pewter and Dark English. Full-wrap hinges are perfect for face frames while the partial wrap style is best used on frameless cabinets. Hinges ac-commodate a 3/4" thick door with a door gap as small as 1/16". Other features include an exclusive pin treatment for silent reliable performance, horizontal and vertical adjustments and on the full wrap hinges, an angled set hole for quick, easy installation. The ultimate in professional cabinetry hardware. Sold individually, with screws. Full Wrap Partial Wrap Each 10+ Each 124231 solid brass - minaret ......................... $7.50 ....... $6.75124232� 124233 solid brass - ball ................................ $7.50 ....... $6.75124234� 124235 polished brass - minaret ...................$4.50 .......$4.05124236� 124237 polished brass - ball ..........................$4.50 .......$4.05124238� 124239 antique - minaret ...............................$4.50 .......$4.05124240� 124241 antique - ball ......................................$4.50 .......$4.05124242� 124243 nickel - minaret ..................................$4.50 .......$4.05124244� 124245 nickel - ball .........................................$4.50 .......$4.05130191� 130193 pewter - ball .......................................$4.50 .......$4.05130195� 130197 pewter - minaret ................................$4.50 .......$4.05130192 130194 dark english - ball ..............................$4.50 .......$4.05130196 130198 dark english - minaret .......................$4.50 .......$4.05

construction of drop-leaf or harvest tables. Hinge measures 11/2" wide x 31/8" length open. Plain steel with 5/8" screws included. 10+

27I25 ................pr.�$5.50 .... $4.95

Partial�WrapApplication

Full�WrapApplication

Hardware


Chest�HandlesSolid brass, sandcast with bright finish. Small handle 31/2" x 2". Large handle 41/4" x 13/4". Handles are decorative pull handles not to be used for lifting. Each 4+127382�(A) sm. ....$25.99 ...$23.39127383�(B) lg. ......$23.99 ...$21.59

A

BChest�HandlesSolid brass, sandcast with bright finish. Light-duty handle - 31/2" bail; heavy-duty handle – 41/2" bail. Handles may be used for lifting. Exercise care as weight rating is dependent on wood used. Each 4+127398� (A) lght.-duty $14.99 $13.49127399� (B) hvy.-duty $29.99 $26.99

A

B

Period�Swan�Neck�PullSolid brass, sandcast with bright finish. Boring Each

127351� 3" .........................$14.99127352� 31/2" .......................$14.99127353�� 4" .........................$19.50

DANCO�Face�Frame�HingesThe Face Frame series has complete

AA

3-way adjustment integrated into the hinge and plate. Sold in pairs with screws and instructions. Per Pair 6+147569� �110° full overlay ................ ................. $7.99 ......$7.19147570� (A) 110° half overlay ......... ................. $7.99 ......$7.19

DANCO�Clip-On�HingesThis European style clip-on hinge incorporates 3-way adjustment, allowing fast and precise corrections of assembly or installation inaccuracies.

A A

Adjustments are integrated into the hinge and base plate. Nickel plated; self closing. Sold in pairs with screws and instructions. Per Pair 6+147573� (A) 110° full overlay ............ ..................$6.99 ..... $6.29147574� 110° half overlay ................ ..................$6.99 ..... $6.29147575� 110° inset $6.99 ..... $6.29147576� 165° full overlay ................. ...............$13.50 ...$12.15

BLUM�Clip�Top�Inset�HingesBlum’s newest clip top inset hinges make it possible to use inset doors on both face frame and frameless construction. Frameless mounting plate features easy up and down adjustment. Face frame mounting plate screws securely to the inside of the face frame so that even beaded rails or beaded doors can be utilized. New Top Clip Hinge features single screw adjustment that positions door in and out for precise alignment. Use (A) for face frames and (B) for frame-less applications. Sold in pairs with screws and instructions. Per Pair 6+142856 (A) ......... $16.99 ..$15.29131236 (B) .......... $16.99 ..$15.29

AB

BLUM�Face�Frame�HingesProduce the “ E u r o p e a n L o o k ” w i t h traditional face frame cabinets. Hinges open to 110° and are available for both face or edge mounting. Packaged in pairs with screws and instructions. Per Pair 6+02R80 face mount $6.99 .. $6.2902R85 1/2" overlay ..$6.99 .. $6.2902R90 3/4" overlay ..$6.99 .. $6.29142511 35mm carbide bit ..$21.99

120° Half120° Full

BLUM�Clip�Top�HingesWith�Cam�Plate�Technology�and�Spiral�Tech�AdjustmentThe best just got better. Removable hinge technology combined with single screw plate and hinge adjustment make these the most advanced hinges on the market today. Now with the turn of a fixed screw you can move the Cam Action Hinge Plate up and down for precise door adjustment in the carcass. Also, with the door attached to the hinge plate, through “Spiral-Tech” depth adjustment you can move the door in or out of the carcass for perfect alignment. Other features include a flange around the perimeter of the cup for added strength and a closed cup, so you don’t see the core material of the door. Sold in pairs with screws and instructions. Per Pair 6+142852� 120° full .. $10.99 ...$9.89142853� 120° half $10.99 ...$9.89142854 170° full ... $16.99� $15.30142855 170° half $18.99� $17.09142511� 35mm carbide bit $21.99

BLUM�Compact�Face�Frame�HingesBlum’s 38N series Com-pact Hinges are specifically designed for face frame cabinetry and provide all of the advantages that come with concealed hinges. The Compact 38N is the highest quality face frame hinge for small overlays. Its integrated cam depth adjustment, along with its prov-en side and height adjustment, enable a quick and simple 3-dimensional door adjustment. All hinges are equipped with a self-closing mechanism which guarantees that the door will close securely. We offer both a Wrap Mount and an Edge Mount design. Packaged in pairs with screws and instructions. Per Pair146560 1/ 2" overlay wrap..... $5.99146561 3/4" overlay wrap .... $5.99146562 1/2" overlay edge .... $5.99

Flush�RingsSolid Brass, bright finish. Dimensions Each127384� (A) 11/2"dia...............$14.99127385 (A) 2" dia. .................$20.99127386� (B) 11/2" x 11/4" .........$17.99127387� (B) 21/2" x 2" ............$23.50

A B

EZ-Mount�Hinges�The EZ-Mount soft close hinge is the most tech-nologically advanced, hydraulically damp-ened Euro-style cabinet hinge on the market today. The hinge is a self closing, dampened hinge that closes softly, cannot be slammed and holds the door closed yet is easy to open too. E-Z Mount’s patented hydraulic cylinder and seal technology; dou-ble wall construction; multi plate connecting arm and unique 4 hole mounting plate ensures it will stay where you put it and operate flaw-lessly. The EZ-Mount Hinge is suited for frameless kitchen cabinets, bathroom vanities, furniture, entertainment centers, and custom cabinetry. For fast, easy cabinet door installation we recommend the EZ-Mount hinge jigs sold separately, in pairs below. Choose for full, half, or inset applications, sold 1 per bag with mounting screws. 1-5 12-35 36+845846 (A) full overlay .................... .... $5.99 ... $5.39 .. $4.85845847 (B) half overlay .................. .... $5.99 ... $5.39 .. $4.85845848 (C) inset .............................. .... $5.99 ... $5.39 .. $4.85150923�(D) E-Z Mount hinge jigs .... (2) ............................$19.99

A

B

C

D

Period�EscutcheonsSolid brass with keyhole. 3" x 17/8". Finish Each 4+127360 bright ........ $10.99 ....$9.89127361 antique ..... $10.99 ....$9.89

Period�HandlesSolid brass, matches escutcheon design above. Bright or Antique finish. The 4" handles have a 3" bore, the 3" have a 23/32" bore. Finish Overall Each 4+127362� bright 3" $14.99 $13.49127364� bright 4" $16.99�� $15.29127363� ant. .... 3" $15.99 $14.39127365� ant. .... 4" $21.99�� $19.79

Solid�Brass�Escutcheon�PinsSold in 2 oz packages.150532 1" x 16 gauge .......... $3.50150533 1/2" x 18 gauge ........ $3.50150535 5/8" x 18 gauge ........ $3.50150534 3/4" x 18 gauge ........ $3.50

Hardware


Bed�Rail�Bracket�SetThis bed rail bracket set is like no other we’ve ever seen. The user friendly sur-face mount bracket is manufactured from heavy gauge stamped steel and the mating pieces slide together and tighten down with an integral bolt to create an extremely secure bed frame joint. Best of all, the interior attachment is hidden from view. Each joint requires 8 mounting screws (32 screws total) and we recommend #8 x 5/8" screws as a minimum, while thicker boards can support longer screws. Each set contains 4 pair of brackets – enough for one bed. Screws sold separately.151045 .................................... $9.99

Hardwood�Table�SlidesProvide natural strength and smooth extending action for two-part tables. Hardwood slides feature dovetailed tracks and sag-proof shaping. Slides are 23/8" deep. Pre-bored for #10 or #12 screws.

Standard�Slides�for square end tables (Parsons) up to 60" when closed. Slides are 46" long closed. Opens 36" for leaves, one pair.27N22 ........................... pr.�$54.99

Pedestal�Slides for round or oval 4 leg or split pedestal tables up to 48" long. Opens 36" for leaves. Slides are 24" closed. One pair.27N21 ..............................pr.�$44.99

Pre-Cut�Drawer�SidesMaking drawers? Take a tip from the pros and use these pre-cut components to cut your project construction time and quite possibly save a few dollars as well. Our drawer sides are pre-finished and have a rounded top that provides a decorative edge. Both are 1/2" thick, slotted 1/4" for the drawer bottom and 60" in length. Height Length Each 6+146705 4" .......... 60" ........... $9.99........$8.99146706 6" .......... 60" .........$13.99......$12.59

Align-N-LockIs a new innovation in tabletop hardware that provides two functions in one piece of hardware. It accurately aligns the two sections of the table-top and provides a secure locking mechanism as well. Plated steel. Screws not included.124295 .............................. ea.�$3.50

Banquet�Folding�Legs�And�Folding�Bench�LegsWhat a great way to add more table space for that next family reunion. Legs are constructed of heavy-duty 1" tubular steel with welded joints. Banquet legs lock open or fold flat for easy storage. Folding Bench Legs feature a wide base for secure mount-ing and fold flat. Sold in pairs, black.(A)�Banquet�Legs Pair 3+ Pair813802� ..............$28.99 ..... $26.09(B)�Bench�Legs813803� ..............$25.99..... $23.39

A B

Heavy-Duty�Leg�LevelersPerfect for cabinets, tables, or shelv-ing units, these levelers feature a lipped mounting bracket that works to lift, support and create more stability. Small foot leveler, 15/16" diameter, comes in a set of 4 and has a pivot-ing steel base with plastic protective cap. Wide foot leveler, 23/8" diameter, is sold individually. Both are made of heavy-gauge, plated steel and use a #5 hex wrench for adjustment.145840 small foot (4) ..........$17.99 Each 4+142498 wide foot (1) $6.99 $6.30

Tabletop�Fasteners�&�PinsTabletop Fasteners attach tops to aprons to allow for seasonal wood movement. When screwed to the bot-tom of the tabl top, these fasteners clip into a 3/32" (one saw kerf) slot in the apron. Screws not included. Bag of 1027N10 (A) ........................ ea.�$1.99Table�Pins align and hold your table leaves in position. Brass-plated steel pins press fit into an 8mm hole. Bag of 10 10+ Bags27A30 (B) ..........$5.99 ....... $5.40146617 8mm brad point bit $4.99

B

A

Threaded�InsertsSolid brass f a s t e n e r s for joining wood, chip-board, and plywood; es-pecially useful in knockdown furniture. Simply drill a pilot hole, thread in the insert with a screwdriver or "T" wrench, then use a machine screw or bolt to attach the other part. Packs of 10. Pilot Thread Length Hole Size Pack of 1012J20� 3/8" ....1/4" .....6-32 .... $3.5012K40� 3/8" .. 1/4" .... 8-32 ..... $3.5012K10� 1/2"... 3/8" ... 10-24 .... $3.5012K50� 1/2"... 3/8" ...1/4"-20 ... $5.9912K60� 9/16" .. 1/2" .. 5/16"-18 ... $6.9911M40� 9/16" .. 1/2" ... 3/8"-16 .... $7.5011M30� 9/16" .. 1/2" ...3/8"-24 .... $7.50

"T"�Wrenches. Install threaded inserts straight and easy without damaging wood.12J15 6-32 ......................... $4.9912K45 8-32 ......................... $4.9912K15 10-24 ....................... $4.9912K55 1/4"-20 ...................... $4.9912K65 5/16"-18 .................... $4.9912F33 3/8"-16 ...................... $4.9912F23 3/8"-24 ...................... $4.99

A

BC

Cabinet�AndFurniture�Levelers3/8"-16 TPI x 31/2" long stems are installed in base units and easily adjusted with a screwdriver from the top or a wrench at the hex nut bottom. Glides have a 11/2" diameter, no-mar nylon swivel/tilting pad. Screws not included. Packs of 4.

(A)�Corner�Bracket�Levelers provide cabinet frame support. Each Pack 10 + Packs27P10 .............. $9.75 ............$8.77

(B)�T-Nut�Levelers. Easy installation, bore a 1/2" dia. hole and hammer in the T-nut.27P20 ...............$6.99 .......... $6.29

(C)�U-Bracket�Levelers for maximum strength on extra-heavy pieces.27P30 ............ $14.50 ........ $13.05

Bed�RailFastenerAttach rails to posts or use in other K-D furniture applications. Requires full mortise installation. Made of heavy gauge, 5/8" wide steel. Fasten-ers are 5" long, sold in sets of 4. Mounting screws not included.127456� ................................$11.50

Table�Leg�Corner�BracesFor an economical attachment of table legs to frames. Ends of the brace are set into grooves in the frame. Hanger bolts (listed below) then attach leg to brace. Heavy galvanized steel. 11/2" x 4". Mounting screws not included. Each 10+

27A31 (A) ............. $1.50 ....... $1.35

Hanger�Bolts�(B)5/16" steel bolt has wood threads on one end and 18 TPI machine threads on the other. Use a 9/32" pilot for softwood or 19/64" bit for hardwood. Packs of 10. Each 10+130237 2" ...........$1.99 ........$1.79130238 21/2" ......$1.99 ........$1.79130239 3" ...........$2.50 ........ $2.25

A

B

Bed�Bolt�Cover�And�BoltTraditional bolt cover in Sheraton styles with a brass finish. Square head, 3/8" x 6" long rigid steel bolts provide extraordinary structural support. Bolts are complete with nut and washer.130213 13/4" dia. cover .......... $7.50130211 6" bolt ....................... $6.99

No-Mortise�Bed�Rail�FittingsYou’ l l f ind dozens of applications w h e r e t h e s e no-mortise bed rail fittings will come in handy. Made of heavy-gauge steel with a rustproof, chromate plating, they measure app. 3" tall and use a #10 screw for mounting (not included). “L” bracket mounts to the post of the bed and the plate mounts to the bed rail. Set of four includes two rights and two lefts.142496 set of 4 ...................$11.99

Hardware


Folding�Shelf�BracketsSecurely lock themselves in position when raised! Attach to the wall or any vertical surface where a temporary shelf is needed. Rated for 130 lbs./pr. White enamel finish, sold in pairs. Shelf Width Per Pair 10+ Pair128943 8" .......$12.99 .....$11.69128944 12" ......$14.99� ..... $13.49

124

Shelf�Pins�And�SupportsWe offer a variety of styles and finishes to fit every shelving need. Bags of 25 each.(A)�Clear�Bracket�Style27I31 clear, 5mm ................ $3.50

(B)�5mm�Round�Shelf�Supports. Insert in 5mm hole, project 15mm (5/8") into case. Bag of 20 5+ Bags130339 nickel ........ $4.99 .... $4.49130340 brass ........ $4.99 .... $4.49(C)�Flat�Spoon�Style27I11 brass 1/4" .................$2.9927I32� brass 5mm ...............$2.9927I12 nickle 1/4" .................$2.9927I13 bronze 1/4" .................$2.99(D)�Bracket�Style Shank Dia. Bag of 2527I14 brass 1/4" .................$3.9927I33 brass 5mm ...............$3.9927I15 nickle 1/4" .................$3.9927I16 bronze 1/4" .................$3.99

(E)�Bracket�Style.�With hole.27I17 brass 1/4" .................$6.9927I18 nickle 1/4" .................$5.5027I19 bronze 1/4" .................$5.50

(F)�Bracket�Style�Glass�Shelf�Support.�Brass with brown sleeve.27I20 brass 1/4" .................$3.99

AB C

D EF

Cedar�Chest/Toolbox�Hinge�And�Lid�SupportThese hinges are easy to install and very effec-tive as both a hinge and support on cedar chests, toolboxes or trunks. Mounts to the side of the chest and the underside of the top. Brass-plated steel construction. Sold in pairs with mounting screws. Per Pair141533 brass ...................................................$24.99

Space�BallsTM

These simple, yet effective objects center solid panels, then compress as the pan-el expands. They stop panel rattle and he lp e l i m i n a t e c r a c k i n g glue joints. Space Balls are 0.26" in diameter tomatch the cut of standard stile and rail bits. 8-10 Space Balls recommended per door, 100 perpackage.142284 ................................. $5.99

Glass�Retainer�Clips(A)� Thumbscrew� Retainer. Firmly holds glass panels in wood frame doors. Thumbscrew adjusts to various door or glass thicknesses. Surface mount on inside of door. Bronze fin-ished steel with mounting screw and plastic tip. Bag of 10 10+ Bags27A15 .....................$4.99 ...... $4.50(B)� Plastic� Retainers. Soft plastic retainers hold glass firmly in place. Available in 1/8" or 3/16" offset. 1/8"�Offset Bag of 10 10+ Bags130329 clear ........$3.50 ....... $3.15130330 brown ......$3.50 ....... $3.153/16"�Offset Bag of 10 10+ Bags130327 clear ....... $3.50 ..... $3.15130328 brown ..... $3.50 ..... $3.15

A

BDoor�Bumpers�Soften impact and noise from cabinet doors. Clear with adhesive back.Small 5/16" dia. x 1/16" thick. Sheet of 75. Each Sheet 3+ 02S81 .....................$7.99 .....$7.19

Large 7/16" dia. x 1/8" thick. Sheet of 56.02S82 .................. $8.50 .....$7.65

Keyhole�Hangers�Used with flat-head screws to join two sur faces together. The tapered p late ensures a snug friction fit. Single hole is 5/8" x 15/8", double hole is 1/2" x 3". Two per pack.

Each Pack 10+125505 single hole ...$1.25� $1.13125506 double hole..$1.99�� $1.79

Friction�Lid�SupportsThese curved friction lids supports are bright brass finish steel, designed to support lids on shallow depth boxes and chests at least 21/2" deep. Avail-able in either left or right mount, with adjustable tension to hold a lid in any position. Each 3+149757 (A) left hand mount� ......... ................$6.99 ......$6.29149758 (B) right hand mount ........ ................$6.99 ......$6.29

A

B

B

C

A

Knock-Down�Hardware(A) Connector Bolts. Use with cross dowels, connector nuts, or any com-mon 1/4"-20 nut. Steel bolts feature 11/16" diameter, bevel-edged heads for extra surface support and low-profile design. Black oxide finish. Requires metric M4 hex wrench for installation. Available in 3 lengths for different stock thicknesses. Packs of 10. Length Pack of 1006M40 .... 11/8" ....................... $3.9906K80 ...... 2" ......................... $4.5006K90 ...... 3" ......................... $4.5006K4A M4 hex key ..............ea.�$.75(B)�Cross�Dowels. Barrel nuts are solid steel, 16mm long (.630") x 10mm diameter (.393") with slotted end for in-hole alignment 1/4"-20 threaded hole is off-center. For use in 5/8" and thicker stock. Packs of 10. Pack of 1006K70 ................................... $2.99(C)�Cap�Nuts. Mounts on bolts for clean board-to-board joining of shelves and cabinet sides. Same head design as our bolts. 1/4"-20 internal thread. 5/8"L x 3/8" dia. body. Requires M5 hex key. Packs of 10. Pack of 1006M50 ................................... $3.9906K3A M5 hex key ........... ea.�$.75

Self-Balancing�Lid�SupportsSpring-loaded and easy to mount on the inside of the lid and box. Touch-control cam action keeps lid open and steady; no fear of it banging down unexpect-edly on small hands. Great for toy chests and other drop lid pieces like hope chests, win-dow seats, storage chests, and stereo cabinets. Available in 3 sizes for different lid weights, listed here in inch-pounds. (Note: to find inch-pound (IP) for a lid, multiply 1/2 the distance from front to back by the weight.) Designed for mounting on the left or right of the case, either may also be center mounted. Statuary bronze finish, screws included.Left04X21 35-45 IP lids ............... $5.9904X61 45-55 IP lids ............... $5.9904Y31 95-125 IP lids ............. $5.99Right04X12 35-45 IP lids ............... $5.9904X13 45-55 IP lids ............... $5.9904X15 95-125 IP lids ............. $5.99

Mounts Left, Right or Center

Mounts Left, Right or Center

Heavy-Duty�SwivelsDesigned for barstools, swivel chairs, television turntables and can be used as giant lazy susans. Heavy 12-gauge

steel plates run smoothly on a full ball-bearing race. Mounting slots on corners (51/4" center-to-center) accept round head screws or bolts. Use the 3-degree swivel on chairs or stools designed with a slight backward tilt. The return swivel keeps barstool backs neatly aligned when not in use.Overall size 7" x 7". Swivel Style Each03M51 flat, 1" thick .............. $9.9903M52 3°, 17/8" thick ........$10.9903M53 return, 11/16" thick $19.50

Lazy�Susan�BearingsEach durable interlocked lazy Susan unit glides smoothly on 1/4" ball bearings and maintains maximum stability, even under heavy loads. Use

them for revolving shelves in kitchen cabinets, planters, serving platters at the table, even large tabletops. 3" - 12" sizes are zinc-plated to guard against rust. The 175/16" unit is ideal for your largest revolving surfaces. It has a full 160 ball race captured in a durable ABS plastic housing for whisper-quiet operation and mar-free rubber feet to prevent slipping. 3" - 6" sizes are square, 9" - 175/16" are round. Capacity/ Size Pounds Thickness Each02Z21 .....3" .......200 ... 5/16" ... $1.9902Z31 .....4" ...... 300 .... 5/16" ... $2.5002Z41 .....6" ...... 500 .... 5/16" ... $3.50124300 ...9" .......750 .... 5/16" ... $4.9902Z51 ....12" .... 1000 ... 5/16" ... $7.9927A04� 175/16" ...220 ....13/16" $54.99

Hardware


ACCURIDE�4034�File�Drawer�Slides�Great for file drawers and deep kitchen drawers. These smooth progressive movement slides feature all-steel ball bearings with full extension plus 11/2" of over-travel. The over-travel lets you make use of the entire drawer and makes back of the drawer access easy! 150 lbs. load rating, designed for drawers up to 24" wide. Pair 5+ Pair130597 16" .......$33.50 .....$30.15130598 18" .......$35.50�..... $31.95130599 20" .......$36.99 .....$33.29130601 22" .......$40.99 .....$36.89130602 24" .......$42.50 .....$38.25

33/16"

113/16"

1/2"

� � Pair 5+ Pair 130603 26" ...........$43.99 .....$39.59130604 28" ...........$44.99 .....$40.49

125

ACCURIDE�Slides�-�The�Professional�Cabinetmakers�Choice�Why? Because of their high quality, dependability and versatility. The smooth, quiet movement of a drawer installed with an Accuride suspension system is irresistible. Once you have experienced it, you'll insist on Accuride for all your furniture and cabinet designs. All metal with prelubricated ball bearings, they are available in bright chrome, white epoxy and contemporary black zinc finishes. All slides are packaged with mounting instructions and screws.

ACCURIDE�3732Full Extension Drawer Slides with a lower profile, only 1/2" wide and 11/2" tall, rated at 100 lbs per pair for light to medium applications. Features a front face-mounting hole for face frame applications, easy and simple unhanded disconnect to remove drawer from the cabinet and moves on silent-rolling acetal polymer ball bearings. These slides are a great choice when upgrading from 3/4 extension slides.

Clear�Zinc�Finish Pair 5+ Pair131195 12" .......................................................................$14.99....... $13.49131196 14" .........................................................................$15.99....... $14.39131197 16" .........................................................................$16.50.......$14.85131198 18" ........................................................................$16.99.......$15.29131199 20" ........................................................................ $17.50�.......$15.75131200 22" ........................................................................$18.99........$17.09131235 24" .........................................................................$19.50........$17.55131201 26" ........................................................................$19.99........$17.99131291 face frame hardware kit/3732 .............................$3.99

"

"

13/8"

1/2"

ACCURIDE�21323/4�Extension�Low�Profile�Drawer�SlidesThese all steel ball bearing slides are an economical, lower load capacity alternative to a full extension slide. Features include a low profile, lever disconnect for easy drawer release, 75 lb. load rating, and easy installation. Pair 5+ Pair Pair 5+ Pair130587 10" ........ $10.99 ...... $9.89130588 12" ........ $10.99 ...... $9.89130589 14" ........$11.50 ....$10.35130590 16" ........$11.99 .... $10.79130591 18" ........$12.99 ....$11.69130592 20" ........$13.99 ....$12.59130593 22" ........ $14.99 ....$13.49130594 24" ........ $16.99 ....$15.29

130595 26" .........$17.99 ....$16.19150183 28" ........$18.99 .....$17.09Face�Frame/Rear�Bracket�KitConverts standard 2132 slides into face frame slides. Includes 2 front, 2 rear brackets. Rear Bracket has 2" (50.8) adjustment range. With Instr.150239 ................................... $4.25

Black�Zinc�Finish Pair 5+ Pair27D01 10" ......$18.50 ....$16.6527D02 12" ......$18.99 .....$17.0927D03 14" ......$19.99 .....$17.9927D04 16" ......$21.50 ....$19.3527D05 18" ......$21.99 .... $19.7927D06 20" ......$22.50 ....$20.2527D07 22" ......$22.50 ....$20.25124918 24" ......$24.99 ....$22.49124919 26" ......$25.50 ....$22.95150211 28" ......$25.99 ....$23.39

Electro�Zinc�(silver-colored)�Finish27D11 10" ......$15.99 ....$14.3927D12 12" ......$15.99� ...$14.3927D13 14" ......$16.99� ...$15.2927D14 16" ......$18.99 ....$17.0927D15 18" ......$18.99 ....$17.0927D16 20" ......$19.50 ....$17.5527D17 22" ......$20.50 ...$18.45124920 24" ......$20.99 ...$18.89

Pair 5+ Pair124921 26" ......$21.99� ... $19.79150210 28" ......$22.99� ...$20.69White�Epoxy�Finish

27E30 10" ......$19.50 .....$17.5527E31 12" ......$20.50 ....$18.4527E32 14" ......$20.99 ....$18.8927E33 16" ......$21.50 ....$19.3527E34 18" ......$23.50 ....$21.1527E35 20" ......$23.50 ....$21.1527E36 22" ......$23.50 ....$21.15124922 24" ......$25.50 ....$22.95124923 26" ......$25.50�.... $22.95

Face�Frame/Rear�Bracket�KitConverts standard 3832 slides into "face frame" slides while providing support at the rear of the slide. Kit con-sists of two front brackets that are self-positioning for quick installation, and two rear brackets that have 2" of length adjustment, and both vertical and horizontal adjustment. Assembly instructions included. 5+

130834� ................. $4.99 .... $4.49

ACCURIDE�3832�Full�Extension�Drawer�SlideDesigned for use in 32mm cabinet systems, these new slides have some great features. The first mounting hole is located for the 37mm set-back used in the European system and the load rating has been increased to 100 lbs. The narrow 1/2" side clearance and the low 113/16" height is great for shallow drawers. Slides move on silent-rolling ball bearings and feature hold-in and hold-out stops, and a quick-disconnect lever. Sold in pairs.

113/16"

1/2"

Accuride�Cam�Drawer�AdjustAvailable on models 3832 and 2132, this new feature is a simple and precise way to make vertical adjustments of up to 1/8" on your slides with a simple twist of a screwdriver. Once the alignment is correct, attach fixing screws to make the adjustment permanent.

ACCURIDE�9301�Heavy�Duty�SlidesDesigned for large pantry pull-outs, vehicular storage and wide, heavy drawers. Full extension slide for drawers and pull outs up to 32" wide. Features both side and flat mount option. Load rating depends on mounting option per pair: 150 lbs. flat mount; 300 lbs. side mount (mobile); 400 lbs. side mount (frequent usage) and 500 lbs. side mount (moderate usage). Each 5+150225 16" .......................................................................$104.99 ........$94.49150226 20" .......................................................................$119.99 ......$107.99150227 22" .......................................................................$139.99 ..... $125.99150228 24" .......................................................................$144.99 ..... $130.49150229 28" ....................................................................... $147.99 ..... $133.19150230 34" .......................................................................$189.99 ......$170.99150231 36" .......................................................................$199.99 ......$179.99150232 48" .......................................................................$299.99 ..... $269.99150233 60" .......................................................................$399.99 ..... $359.99

ACCURIDE�9301�Bracket�KitsOptional kits that adapt the 9301 for use as platform slides. Use on pantry pullouts, RV luggage platforms and TV or entertainment unit platforms. Brackets provides 4 bottom and 2 side mount options. Kit includes 2 brackets, four 1/4" hex head screws, four 1/4" hex head nuts and lock washers. Please see www.woodcraft.com for usage chart. Each 5+150242 12" ..........................................................................$27.99 ....... $25.19150243 16" ......................................................................... $29.99 ....... $26.99150244 22" .........................................................................$31.99 ........$28.79150245 28" ........................................................................$33.99 ....... $30.59

ACCURIDE�3832SC�Self-Closing�Drawer�SlideThe only slide of its kind that is designed to close drawers completely and keep them closed. Perfect for a variety of needs including mobile applications and frequently used custom cabinetry to casework and furniture. Contains all of the same features of the standard 3832 series slides plus the self-close, stay-close mechanism. Slides are full extension with a 100 pound load rating. Sold in pairs.

Standard�Clear�Zinc Pair 5+ Pair142860 16" ......$19.50 ......$17.55142861 18" .....$20.50 .....$18.45142862 20" .....$21.50 ..... $19.35142863 22" .....$23.99 .....$21.59

Black�Finish Pair 5+ Pair142864 16" .....$19.50 ......$17.55142865 18" .....$20.50 .....$18.45142866 20" .....$21.50 ..... $19.35142867 22" .....$24.99 .....$22.49

Hardware


ACCURIDE�3834�Medium�Duty�Slide�With�1"�Over-TravelFor use where full access to the rear of the drawer is desired. Features include: 1" over travel; 32mm and traditional mounting hole pattern. 90 lb. load rating. Pair 5+ Pair150221 16" ............................... $16.99 ... $15.29150222 18" ................................$17.99 ....$16.19150223 20" ............................... $18.99 .... $17.09150224 22" ............................... $19.99 .... $17.99

ACCURIDE�2002�Two-Way�Travel�Slide3/4 extension, two way travel slides for drawers or shelves up to 16" wide. Use for pass through shelves and kitchen islands where access from both sides is desired. 50 lb. load rating. Clear zinc finish. Pair 5+ Pair150175 24" ...............................$41.99..... $37.79150176 28" ...............................$43.99.....$39.59

ACCURIDE�2109�Suspended�Mount�Keyboard�Slide3/4 extension slides for drawers up to 16" wide. Great for computer keyboards, writing, pull out shelves or anywhere and adjustable height shelf or shallow drawer is suspended under a work surface. Features include: lever disconnect, detents so drawers may be held out or in and variable height mounting brackets. 75 lb. load rating. Clear zinc finish. Pair 5+ Pair150177 12" ............................... $25.99 ....$23.39150178 14" ............................... $26.50 ... $23.85150179 16" ............................... $26.99 ....$24.29150180 18" ................................$27.50 .... $24.75150181 20" ................................$27.99 ....$25.19150182 22" ...............................$28.50 ....$25.65

ACCURIDE�2632�Low�Profile�Light�Duty�SlideLow profile, full extension slide for drawers up to 16" wide. Use in small to medium cabinets, desks, kitchens cabinets and store fixtures. 65 lb. load rating. Clear zinc finish. Pair 5+ Pair150184 8" ..................................$27.99 ....$25.19150185 10" ................................$27.99 ....$25.19150186 12" .............................. $28.99 ....$26.09150187 14" ............................... $29.99 ....$26.99

ACCURIDE�301-2590�Undermount�Shelf�SlideDesigned for pull out storage such as shelves, kitchen pantries and entertainment centers up to 16" inches wide. Features include dual mount (shelf or platform), almost an inch of over travel, hold in detents to prevent roll-out and bounce back plus a 155 lb. load rating. Clear zinc finish. Pair 5+ Pair150188 20" ................................$69.99... $62.99150189 26" ................................$84.99....$76.49

ACCURIDE�3017�Over�Travel�SlideMedium Duty Slide with 1" over travel for drawers up to 24" wide. A good choice for box and file drawers in wood and metal desks, credenzas and institutional furniture. Features include: positive stop, detent in, silenced operation, heavy duty handed rail and access holes for closed position mounting. 100 lb. load rating. Clear Zinc Finish. Pair 5+ Pair150190 12" ................................$31.99....$28.79150191 14" ................................$32.99....$29.69150192 16" ................................$33.99....$30.59150193 18" ................................$34.99....$31.49150194 20" ................................$35.99... $32.39150195 22" ................................$36.99... $33.29150196 24" ................................$38.99... $35.09150197 26" ................................$42.99... $38.69150198 28" ................................$43.99....$39.59 ACCURIDE�3600�

Bracket�Mount�Platform�22"�SlidesThis slide is designed for use on platform pull-outs for waste or recycling, laundry or other bin storage. Features include self closing action which eliminates bounce-back and drawer creep; silenced operation; and handed lever disconnect. For drawers up to 16" wide. 175 lb. load rating. Clear zinc finish. Pair 5+ Pair3600-200 has a fixed inboard bracket only. 150204 3600-200D ...........$119.99 .....$107.99�

3600-201 has a fixed inboard top bracket and outboard bottom bracket. (shown)150205 3600-201D ......... $134.99 .... $121.49

ACCURIDE�3640�Heavy�Duty�Dual�Mount�SlideUse in large storage drawers, store fixtures and lateral files up to 42" wide. Features dual mounting option - either side or flat mount with hold in detent; 1" over travel and optional installation using either traditional or 32mm hole patterns. 200 lb. load rating for side mount and 75 lb. load rating for under or flat mounting. Load rating are per pair of installed slides. Clear zinc finish. Pair 5+ Pair150207 16" ............................... $45.99 ... $41.39150208 18" ................................$47.99 ... $43.19150209 20" ............................... $49.99 ... $44.99

ACCURIDE�CH3832�Weather�Resistant�SlidesMedium duty, full extension slide for drawers up to 16" wide for environments subjected to indirect humidity such as greenhouses, garages, and locker rooms. Features include 32mm and traditional hole mounting options; cam adjust and a special H-coat overcoat providing up to 8 times more protection than standard zinc. 100 lb. load rating. Pair 5+ Pair150212 10" ............................... $26.99 ....$24.29150213 12" ................................$27.99 ....$25.19150214 16" ............................... $28.99 ....$26.09150215 18" ............................... $29.99 ....$26.99150216 20" ............................... $30.99 ....$27.86150217 22" ............................... $31.99 ....$28.79150218 24" ............................... $32.99 ....$29.69150219 26" ............................... $33.99 ....$30.59150220 28" ............................... $34.99 ....$31.49

Face�Frame/Rear�Bracket�KitConverts 3832/3834 slides into “face frame” slides while providing support for the rear of the slide. Kit consists of two front brackets that are self positioning for quick installation, two rear brackets that have 2" of length adjustment and both vertical and horizontal adjustment. Assembly instructions included. Each 5+130834 ........................................$4.99 ...... $4.49

ACCURIDE�1029�Center�Mount�SlideMounts under the drawer. Great for upgrading kitchens, bathrooms, or bureaus. Slide includes rear mounting bracket and nylon friction pads for use between the drawer and face frame. Rated at 35 lbs. Can be used individually or in pairs on wider drawers. Friction disconnect. All bright chrome finish. Cabinet Drawer Drawer Length Depth Extension Each 5+ Each124915� ...... 105/8"-121/2" ......... 13"-141/2" ..........81/2" ..........$7.50..........$6.7527E04� ......... 125/8"-141/2" ......... 15"-161/2" ........ 101/2" .........$7.50..........$6.7527E01� ......... 145/8"-161/2" ......... 17"-181/2" ...........12" ...........$7.99..........$7.1927E02� ......... 165/8"-181/2" ......... 19"-201/2" .........121/2" .........$7.99..........$7.1927E03� .........185/8"-201/2" ......... 21"-221/2" .........141/2" ........$8.50..........$7.65124916� ......205/8"-221/2" ......... 23"-241/2" .........161/2" ........$8.50..........$7.65124917� .......225/8"-241/2" ......... 25"-261/2" .........171/2" ......... $9.99.........$8.99

13 /8"

3/8"

Rear�Mounting�SocketsSave t ime when mounting Blum self -c losing slides in face frame cabinets. Sockets are eas-ily installed at the back of cabinets. Elongated slots allow for vertical and horizontal adjustment. White high- density plastic. Sold in pairs. Screws not included.01V06� ...................................................................$2.99

INNOVALA�Uni-DamperInnovala Uni-Dampers are soft close/anti-slam after market add-ons for all overlay cabinet doors using self closing hinges. For framed or frameless construc-tion, Uni-Dampers will silence cabinet doors closing. Easy to install and economical, Uni-Dampers come in packs of five, with instructions, mounting nails and a mounting locator.150948 ............................................................$17.49

Hardware


Cable�Management�GrommetsIf your building new or altering old furniture by cutting holes to run cables and cords through, we have the grommets to help you hide those ugly raw edges. Standard two piece plastic grommets are easy to install, simply drill the appropriate size hole and insert, or in the case of the oval drill two holes and “connecting the holes” with a jig saw.Round white black brown Each 4+11/2"�� 149802�149803�149804��$2.99��$2.6913/4"� �149805�149806�149807��$3.50��$3.152"� �149808�149809� 149810��$4.50��$4.0521/2"� �149811� 149812� 149813��$4.99��$4.493"� �149814� 149815� 149816��$5.29��$4.76

Oval�(A)�3"�x�61/2"�149817� 149818� 149819��$6.25��$5.62

A

127

ACCURIDE�3132SC�Eclipse�Undermount�SlidesEclipse slides fully extend and carry a 100 lb. load rating in 30" wide drawers. Front levers actuate slide disconnect for easy drawer removal and reinsertion. Drawer front adjustment capabilities are expanded with cams and screws providing up to 1/8" vertical and horizontal movement, and the 1/4 turn cam lock secures drawer front position after the horizontal adjustment. Front face frame holes are sized for wood screws. Compatible with 1/2" to 5/8" drawer box thicknesses. Clear zinc finish. Includes mounting hardware. Per Pair 5+ Pair147836� 14" ............................ $37.99 ..... $34.19147837� 16" ............................ $39.50 ..... $35.55147838� 18" ............................$41.50 ......$37.35147839� 20" ............................ $41.99 ...... $37.79147840� 22" ............................$42.50 ..... $38.25

Rear-Mount�Face�Frame�Bracket�KitSupports face frame application by mounting to back of cabinet and supporting the rear of the slide. Includes mounting hardware. Per Pair 5+ Pair147879�....................................... $3.99.........$3.59

Front-Inset�Bracket�KitPermits installation of slides so the faces of the drawers are flush with the cabinet face. Includes mounting hardware. Per Pair 5+ Pair147878�........................................$8.99�........$8.09

BLUM�230�Drawer�Slides�These heavy gauge-steel drawer slides have aload rating of 100 lbs. and mount easily to drawer bottoms. Self-closing feature keeps kitchens looking neat. Slides have silent nylon bearings, and a durable white epoxy finish. Sold in pairs. Rear socket pair for 01V07 - 01V10. Length Ext. Pair 5+ Pair 01V07� .......................................................... 16" .........125/8" .....$6.50 ......$5.8501V08� .......................................................... 18" .........141/4" ..... $7.29 ......$6.5601V09� .......................................................... 20" ........... 16" ........ $7.49 ...... $6.7401V10� .......................................................... 22" ........1711/16" .... $7.49 ...... $6.7401V06� rear socket, pair...............................................................$2.99

7/8"

1/2"

ACCURIDE�CB9320-258TV�Flat�Panel/Wide�Screen�TV�SwivelHeavy duty platform mounted slides for TV’s up to 65" wide with 22" full extension slides. Swivels 30°in both directions. Features hold-in detent; center detent on swivel platform; hole pattern designed for decora-tive platform applications and optional bracket kit available for flat screen mounting. 325 lb. rating.150234 ...................................................... $699.99

Accuride�Flat�Panel�Bracket�KitProvide vertical support for flat panel TV’s and monitors.150246 .........................................................$89.99

ACCURIDE�3620�TV�Swivel�Heavy duty TV swivel designed for entertainment centers, computer work stations and audio/visual equipment. For use with televisions with up to a 36" diagonal. Features 14" travel and full 360 degree swivel. 225 lb. load rating. Black finish. 150206 .......................................................$189.99

ACCURIDE�113�Medium�Duty�Flipper�Door�SlidesMedium duty Flipper Door Slides for retracting doors mounted horizontally or vertically. Typical applica-tions include large concealed doors for wall units, entertainment centers, cabinets of any kind and file storage systems. Max door measurements by application are 42" wide by 24" tall for a horizontal installation and 24" wide by 42" tall for a vertical ap-plication. 40lb. rating. Hinges sold separately below. 150161 14" ............................................... $31.99150162 18" ............................................... $33.99150163 20" ............................................... $34.99150164 22" ............................................... $35.99150165 24" ............................................... $36.99142852 120°, full overlay hinge ..............$10.99

ACCURIDE�CBMAC�Media�Hardware�PlatformsFor use in Audio/Video (AV) cabinets and entertain-ment centers - full extension 20" slides will supports shelving units up to 203/4" wide by 18" deep and up to 55" tall with 90° of rotation providing full access to back of unit. Features include detent in and out to hold unit in place; cable management ties and clips, CBMAC-50 has 150 lb. rating. CBMAC-100 has 300 lb. rating. Each CBMAC includes mounting hardware, cable ties, cable clips and power strip.150237� CBMAC-50 ................................ $550.99150238� CBMAC-100 .............................. $689.99

ACCURIDE�3132EC�Easy�Close,�Undermount�SlideA fully concealed under mount slide for drawer up to 30" wide. Easy Close action brings the drawer to a smooth, gentle close. Compatible with 1/2" to 5/8" drawer box thickness. Full extension; 100 lb. rating. Clear zinc finish. Pair 5+ Pair150199 14" ................................$51.99....$46.79150200 16" ................................$52.99.... $47.69150201 18" ............................... $54.99....$49.49150202 20" ................................$55.99....$50.39150203 22" ............................... $56.99... $51.29

Front�Inset�Bracket�KitPermits installation of slides so the faces of the drawers are flush with the cabinet face. Mounting hardware included. Pair 5+ Pair147878 ....................................... $8.99 ......$8.09

Rear�Mount�Face�Frame�Bracket�KitSupports face frame application by mounting to back of cabinet and supporting the rear of the slide. Mounting hardware included. Pair 5+ Pair147879 ........................................$3.99 ...... $3.59

Accuride�3132�Optional�Vertical�Disconnect�LeverUse when the drawer bottom is flush with the drawer sub-front. Pair 5+ Pair150247 ........................................$2.99 ...... $2.69

ACCURIDE�CBERGO�Keyboard�Tray�SystemsFor mounting keyboard trays in wood or metal furniture - in home or office workstations.

CBERGO�Tray�200Fully concealed 3/4 extension slides. Features removable palm rest, extra wide tray; built in cable management; removable mouse pad and mounting brackets with 7 height adjustments.150235 .......................................................$169.99

CBERGO�Tray�300Sames featrures as the 200 plus typing surface can be secured in either partial or full extended position; rear storage compartment and 3 position adjustable keyboard trays.150236 ....................................................... $207.99


800�225-1153��www.woodcraft.com

Hardware


KREGDrawer�Slide�Mounting�ToolsWhether you are building production cabinets or just a single set for your home or shop, these tools will greatly simplify the process of accurately positioning slides to assure smooth drawer movement.

(A)�The�Universal�Drawer�Slide�Mount-ing� Tool� takes the guesswork out of mounting drawer slides parallel to the drawer opening. Perfect for mounting most types of metal drawer slides in-cluding; bottom-mount, full-extension, and center-mount slides. It uses the intersection of the cabinet stile and rail in face frame cabinets or the cabinet

side in frameless cabinets as a refer-ence point from which to position a slide perfectly parallel to the drawer opening. This is the only mounting tool that is designed to work with multiple styles of drawer slides thanks to the unique magnetic design. Simply place a metallic drawer slide into position on the base of the tool, align the tool where the stile and rail meet and drive the screws. Perfect alignment every time!145611 ............................... $29.99

(B)�Drawer�Slide�Brackets�are the per-fect companion to Slide Mounting Tool. These rigid brackets can be clamped to the cabinet’s face frame to support the drawer while mounting the slide to the drawer’s side. Sold in pairs.145754� ..................................$9.99

A

B

Custom�HardwoodDovetailed�DrawersSuperior quality, solid hardwood, accurately and expertly machined custom dovetail drawers are only a “phone call” away. Constructed of 5/8" thick Lenga, referred to as Fireland Cherry, a close grain wood that resem-bles American Cherry, but is plantation grown in South America. Drawers are machined with 9/16", half blind dovetails that are one inch on center. Drawer bottoms are made from 1/4" Baltic Birch plywood and fit snugly into the grooved inside perimeter of the drawer. Reveal on the bottom of the drawer will accom-modate the new under mount slides available on the market today. Standard reveal is 1/2", but 1/4" or 3/8" reveals may be specified at time of order. Shipped knocked-down, ready-to-assemble. Just glue and clamp together. Drawer price is based on height and perimeter in inches. Use the following formula to figure your price per drawer. Add the exterior drawer width and depth and then multiply by 2, giving you the linear inches of the perim-eter of the drawer. Multiply this number by the linear inch cost that corresponds to the height of the drawer. Example: A drawer that is 4" H x 12" W x 22" D will cost $37.40. Please call our customer ser-vice department for complete ordering

information. NOTE: there is a minimum of 50 linear inches per drawer, prices are rounded up to the nearest inch. Delivery time is approximately 7-10 working days. Questions? Call our Customer Service Department at 1-800-535-4482. Specifications: Min. Max. Increment Height 2" 12" 1/8" Width 6" 46" 1/16" Depth 6" 31" 1/16"

Linear�Inch�Cost� Price Per Drawer Height Linear Inch140715 2" – 27/8" D/S .......... $0.50140716 3" – 47/8" D/S .......... $0.55140717 5" - 67/8" D/S ............ $0.65140718 7" - 87/8" D/S ............ $0.80140719� 9" - 107/8" D/S .......... $0.85140720� 11" - 127/8" D/S ........ $1.05

BLUM�Tandem�And�Solo�Drawer�SlidesBlum’s new concealed drawer slides mount directly underneath the drawer showing off the craftsmanship of construction, in particular dovetailed joints, instead of compromising their appearances with bulky hardware. Both systems can be used on face frame or frameless cabinets. Instructions included.

(A)�Tandem is the top-of-the line series of fully concealed drawer slides and are full extension, self-closing, with zinc plated steel construction.

A B

Drawer Length Pair 5+ Pair 141352� .................15" .....................................................$35.99 .........$32.39141353� .................18" .....................................................$39.99 .........$35.99141354� ................. 21" .....................................................$40.99 .........$36.89

(B)�Solo 3/4 slide extension, self-closing, epoxy coated finish.141347� ..................15" .....................................................$19.99 ..........$17.99141348� .................18" .....................................................$20.99 .........$18.89141349� ................. 21" .....................................................$21.99 ......... $19.79

Rear�Mounting�Sockets for Solo slides, two, right & left. Screws not included.141350� ...................................................................................................... $2.99

BLUM�Tandem�Slide�Installation�Template�for boring fast and accurate pilot holes.131241 ..................................................................................................... $79.99

4 hinges; 59"-71" use 5; and Over 71" use 6 hinges. 150494 .................................$17.99

Accuride�1432�Black�Hinge�Carrier�StripHinge carrier strips help support the weight of the door, permit additional hinges to be attached to the door and help all the hinges work in unison. Each kit contains to 2 strips, 3 connector clips and assembly hardware. Quantity you’ll need depends on door height. Doors 36" to 56" in height will require 2 strips for each door and doors 56” to 78” require 3 strips per door.150240 .................................$13.99�

Accuride�1432�Connector�Clips�KitAdditional clips with which you can mount more hinges. Each kit contains 1 clip and mounting hardware.150241 .................................. $1.50

ACCURIDE�1432�Heavy�Duty�Flipper�Door�Slides1432’s are for applications where big heavy doors will be used such as media centers, entertainment cabinetry and armoires. They utilize an Anti-Rak cable system specifically designed to eliminate the door sag and wracking associated with bigger doors. The 1432 can be used on doors up to 75 lbs. in weight and 78" in height. Carriers strip kits and hinges kits sold separately. Note: Each door requires slides, carrier strips and hinges. Because the number of required carrier strips and hinges can vary ac-cording to door height, we offer those items separately. For more information on application, please refer to the Accuride Technical document which can be found at woodcraft.com150169 18" .........................$77.99150170 20" ........................ $78.99150171 22" ........................ $79.99150172 24" .........................$81.99150173� 26" ........................$83.99150174 28" ........................$85.99

Accuride�1432�35mm�Hinge�Kit�This kit is for inset doors only, with each kit containing 2 pair of 35mm zinc finished clip-on hinges and all nec-essary mounting hardware. Quantity you’ll need depends on door height: 36" - 47" use 3 hinges; 47"- 59" use

D/S�=�Item�drop�ships�direct�from�manufacturer.

ACCURIDE�Flipper�Door�SlidesChoose the appropriate slide length and add the hinge system, one pair per door, that is applicable to your design and you have the complete system. Installation is easy. Just position the slide against the ceiling and the floor of the cabinet, cut and install a follower strip, mount hinges to your door and clip into place. Each Slide is capable of handling a 42" door up to 30 lbs. Hinges are European design with 3-way adjust-ment. Follower strip can be installed and adjusted without removing the slide.

Slides have a black matte finish. Great for entertainment centers, armoires, kitchen cabinet or computer centers. Instructions included.

Slides, one pair required per door. Slide Slide Per Length Travel Pair150166� .......14"........101/4".......$45.99141603� ......18" ...... 131/2" ..... $45.99141602� .......20"......151/2".......$45.99141601� ..... 22" ...... 171/2" ..... $45.99141600 ...... 24" .......191/2 ...... $45.99150167� .......26"........211/2"......$45.99150168� .......80".......231/2".......$45.99

Hinges, one pair required per door.

Inset�and�Face�Frame, 35mm hinge cup, and maximum 13/16" thick door. Hinges sold separately. 141604 pair .........................$24.99

Thick�Doors, 40 mm hinge cup, door thickness 1" – 11/4".130859 pair ......................... $22.50

Overlay�Doors, 40 mm hinge cup 13/16" maximum door thickness.130858 pair ......................... $22.50

40mm�Carbide�Forstner�Bit142512� ................................. $25.99

Hardware


A

B

HIGHPOINT®Confirmat�Style�ConnectingScrewsMelamine, part ic le b o a r d , a n d M D F (medium density fiber-board) are notorious for their poor holding power when it comes to most traditional fasteners. Confirmat style con-necting screws are designed for cabinets or other types of box construction. These unique fasteners act like a steel dowel forming a strong, stiff butt joint. They have a large shoulder under the head that locks the screw into the wood and prevents pull-ing through into softer materials. A tight fitting Pozi® drive makes running these screws a breeze.

You will notice that these thick fasteners have a blunt point. To install, simply align the two pieces and drill a pilot hole with a specially designed three step bit. A slight unthreaded portion at the tip makes it easy to line up the holes during assembly. Connecting screws can be reinstalled several times without loss of holding power. The Confir-mat Step Drills from Snappy® are designed so you can easily replace the brad point drill if it is damaged.

Offered in two sizes: 5mm x 40mm (11/2" nominal length) for use with

C

BLUMOTION�For�DoorsGet a smooth, silent close with Blumo-tion. The Blumotion system creates a perfect closing motion as it reacts automatically to door size, door weight and closing speed, then brakes the motion of the door accordingly.

Blumotion� For� Compact� Hinges was developed especially for use with Blum Compact Hinges but can be used with any style of European self- closing hinge. Mounts directly to the cabinet. One per door will suffice but large and heavier doors may require more than one. Mounting hardware and instruction included. Each 6+

147965 ..................$4.99 .....$4.49

Blumotion� Snap-On� style was developed to attach direct-ly to specific Blum hinges o f c u r r e n t manufacture in certain applications (see Woodcraft hinge application below). They snap directly onto the back of the hinge. No drill, no screws and no holes in your cabinets, only perfect closings. One Blumotion is required for each hinge. Mounting instruction included.

For� Woodcraft� hinges� 131236� and�142852. Each 6+147966� T5550 .....$3.99 ..... $3.59

For� Woodcraft� hinges� 142853� and�142856. Each 6+147967�71T5650 ...$5.50..... $4.95

BLUM�Tandem�Drawer�Slides�With�BlumotionWhat’s Blumotion? Just as a storm

door closer controls the door, re-gardless of wind or kids, so that

the last few inches of travel a r e slowed and the door is gent l y and quietly closed, Blumotion l e t s y o u slam a drawer closed, only to be caught by a patented mechanism that slows the speed of the drawer and then gently closes it. If you didn’t see the tiny cylinder at the end of the slide you’d think it

was magic! These slides are truly “perfection in motion”. Blumotion is now available on Blum’s Tandem slides for instal-lation on both face frame or frameless cabinet drawers. Whether it is a small top drawer or a loaded deep drawer, this slide adapts to different weights and

closing forces to give a smooth, silent close every time! These fully concealed drawer slides are full ex-tension and designed for drawers that are 1/2" to 5/8" thick. Packaged in pairs, includes quick release locks plus mounting hardware.

Drawer Length Pair 5+ Pair146572 18" ........ $49.99 ....$44.99146573 21" ........$51.99 ....$46.79

Tandem�Slide�Installation�Template. This professional drilling guide makes the process of boring pilot holes fast and accurate.

131241 ................................. $79.99

HIGHPOINT®�XT®�

Round�Washer�Head�ScrewsRound Washer head screws have a raised pan head with an integral washer formed during the heading process. This large bearing surface prevents the screw from being over-driven and makes them perfect for fastening almost any type of mounting bracket. You’ll find these indispensible around the home and shop for mount-ing pictures, cabinets and fixtures on walls, jig building and even table top attachment. Deep thread design holds well in both hard and soft woods and our Extra Torque (XT) configuration means these hardened steel screws are suitable for demanding applica-tions. Black Oxide plating offers moderate corrosion resistance and offers a distinctive visual appeal. Not to be confused with their specialized offspring, the pocket hole screw, these screws will have a standard thread length (1" and under- full thread; over 1" - 2/3 thread). #2 Square Drive. Size Qty WSC#8�x�5/8"� 100 .....630102 .......$4.39 1000 ..630115 .... $23.698�x�3/4" 100 .....630103 .......$4.49 1000 ..630116 .... $25.69

Size Qty WSC#8�x�1"� 100 .....630104 .......$4.69 1000 ..630117 ......$27.798�x�11/4"� 100 .....630105 ...... $5.19 1000 ..630118 .... $30.698�x�11/2"� 100 .....630106 .......$5.69 1000 ..630119 .... $32.998�x�13/4"� 100 .....630107 .......$5.89 1000 ..630120 .... $33.998�x�2" 100 .....630108 .......$6.09 1000 ..630121 .... $35.998�x�21/4"� 100 .....630109 .......$6.49 500 ....630122 .....$19.498�x�21/2"� 100 .....630110 .......$6.59 500 ....630123 .... $20.598�x�3" 100 .....630111 .......$7.19 500 ....630124 .... $24.6910�x�3/4" 100 .....630203 ......$5.39 1000 ..630213 ....$31.0910�x�1" 100 .....630204 ......$5.69 1000 ..630214 ....$31.0910�x�11/4" 100 .....630205 ..... $6.19 1000 ..630215 .... $36.9910�x�2" 100 .....630208 ..... $8.19 1000 .630218 .... $36.9910�x�21/2"� 100 .....630210 .... $10.29 500 ....630220.... $30.89

Square620123� #1 x 1"® ...................... $6.19620108� #2 x 1"® .......................$7.19620110� #2 x 2"® ...................... $8.19620112� #2 x 31/2®" ...............$11.29620115� #2 x 6"® ................... $20.59

HIGHPOINT®One-Piece�Hardened�Steel�Driver�BitsInsert� bits (1")� are designed for use with a magnetic holder.

Power�bits are available in 2" to 6" lengths to reach deep into most counterbored holes. (Packaged 10/pack).

Phillips620102� #1 x 1"® .......................$6.19620100� #2 x 1"® Reduced .......$6.19620103� (A) #2 x 1"® ..................$6.19620104� #2 x 11/2"® ....................$7.19620105� (B) #2 x 23/4"® ...........$10.29620106� #2 x 31/2"® ................ $11.29620107� (C) #2 x 6"®............... $20.59

AB

C

HIGHPOINT®�Trim�Head�ScrewsTrim head screws heads are 1/3 smaller than their flathead counterparts. Hardened steel screws and fine

Qty. 100 Qty. 500#7�x�1"�� 620128 ..... $5.09� 620129....$15.49#7�x�15/8"″� 620130 ..... $6.69� 620131... $20.09#7�x�21/4"″� 620132 ......$7.89� 620133....$23.69#8�x�3"�� 620134 .. $12.39� 620135....$36.99150719 trimhead countersink bit, ea. ...$9.99

threads grip well without splitting. #1 Square Drive.

HIGHPOINT®�Slide�Mounting�ScrewsFlatheads: Nickel finish matches European hinges and drawer slides.

Undercut� Screws: Concentric round heads fit flush in European hinges and slides. Auger points reduce splitting.

Low�Profile�Ball�Bearing�Slide�Screws: The low profile head to clears drawer members, eliminating the “clicking” sound that often comes when using standard pan head screws.

#2�Phillips�Packs of 100Flathead,�Nickel614006 #6 x 5/8" .....�$3.79

Undercut��Flathead,�Zinc615100 #6 x 7/16".....$3.59615101 #6 x 1/2" .....$3.59615102 #6 x 5/8" ..... $3.59615103 #6 x 3/4" .... $4.29

Low�Profile�For�Ball�Bearing�Slides,�Zinc616110 #8 x 7/16" ... $4.59616111 #8 x 1/2" ......$4.59

1/2" thick materials, 7mm x 50mm (2" nominal length) for use with 3/4" thick materials. Use #2 PoziDrive bit for 5mm x 40mm, #3 PoziDrive bit for 7mm x 50mm. Both are bright zinc plated for a clean, finished look. Starter�Kit includes: Step drill bit, repl. pilot , PoziDrive bit and 100 screws.614000��(A) 5 x 40 mm, 100�..$6.49614002� 5 x 40 mm, 1,000�..$43.29149260 5 x 40 mm Starter Kit ........ ...............................$32.99614001��7 x 50 mm,® 100 ........$7.99614003� 7 x 50 mm, 1,000 .. $61.79149261 7 x 50 mm Starter Kit ......... ................................$38.99148114 PoziDrive Bits (3) ................ (B) #2" x 23/4"® ........... $6.99148115 PoziDrive Bits (3) ................ #3 x 23/4"® .................. $6.99148090 (C) Snappy Step Drill .......... 5 x 40 mm ...............$17.99148091 Replacement Pilot ............. 5 x 40 mm ................ $5.99148092 (C) Snappy Step Drill .......... 7 x 50 mm ..............$19.99148093� Repl. Pilot for 7 x 50 mm ... ...................................$7.99614008� 5mm white caps,100 $2.99614009� 7mm white caps,100 $3.99

Fasteners


HIGHPOINT® General Purpose ScrewsOur patented double auger thread design and 21-23° Type 17 self-drilling point reduces splitting, reduces driving torque and allows these screws to be driven into most hardwoods, plywood and particle board without the need for pre-drilling. Countersinking Nibs under the head remove material for a clean finish. Combination Drive recess may be driven with #2 square or Phillips bit. #6 Screws have single auger. #2 Combo Drive, Zinc Plated Steel. 100 500 1,000#6 x 1/2″" 606101 ......$2.49 607513 ........................................$15.49#6 x 3/4"″ 606102 .....$2.89 607514 .........................................$17.49#8 x 1"″ 607501 .....$3.79 607516 ....................................... $22.89#8 x 11/4" 607502 .....$3.89 607517 ........................................ $26.19#8 x 11/2"″ 607503 .....$4.69 607518 ........................................$32.39#8 x 15/8"″ 607504 .....$4.79 607519 ........................................$30.39#8 x 13/4" ″607505 .....$4.89 607520 ........................................$30.69#8 x 2"″ 607506 ..... $5.19 607521 ....................................... $36.99#8 x 21/4" ″607507 .....$6.29 607522 ....................... $20.59#8 x 21/2"″ 607508 ......$6.59 607523 ....................... $21.49#8 x 3"″ 607509 .....$8.99 607524 ....................... $32.89

Patented Double Auger Thread

HIGHPOINT® Extra Torque (XT) means just that! Commonly available screws will actually break around 25-30 inch/lbs., fine for light duty applications, but woodworking demands something better. HIGHPOINT® Extra Torque Woodworking Screws are engineered for tough applications with almost twice the torque values of other screws!ADVANTAGES OF A SQUARE DRIVE DESIGN:Bits are less likely to jump out of the recess and allowing more driving torque.

Square Drive offers a positive “stick-fit” which stays on the screwdriver bit tip; handy for starting screws overhead or from other difficult angles.

Bits will last longer and are less likely to damage the screw.

SELECTIONHIGHPOINT® Extra Torque Woodworking Screws are available in 48 different sizes, lengths and plating choices as well as multiple packaged quantities.

HIGHPOINT® Extra Torque Woodworking screws are available in the following finishes:

UNPLATED DRY LUBE screws are coated with a specially formulated dry lubricant which reduces driving torque and offers a minimal amount of corrosion resistance. Due to the heat treating process, color varies from shades of grey, brown or black.

Size QTY Dry Lube Black Oxide Clear Zinc Yellow Zinc

6 x 1/2" 100 610100 ....... $2.79 613100 ........$2.79 611200 ...... $3.19 612100 .......$3.19 1,000 610113 .....$14.39 613113 .....$15.09 611213 ......$16.79 612113 ..... $16.79 15,000 610126 ...$170.99 613126 .. $188.49 611226 ..$205.99 612126 ..$205.99

6 x 3/4" 100 610101 .......$2.99 613101 .......$3.29 611201 ....... $3.39 612101 .......$3.39 1,000 610114 .....$16.89 613114 ......$17.59 611214 ..... $19.59 612114 .....$19.59 15,000 610127 .. $190.49 613127 .. $220.29 611227 ...$236.89 612127 ...$236.89

6 x 11/4" 100 610102 .......$3.59 613102 .......$4.09 611202 ...... $4.09 612102 .......$4.09 1,000 610115 .....$21.39 613115 .....$23.29 611215 ..... $25.59 612115 .... $25.69 8,000 610128 .. $135.99 613128 .. $155.89 611228 .. $175.59 612128 ...$175.59

8 x 3/4" 100 610103 .......$3.49 613103 ........$3.79 611203 ...... $3.99 612103 .......$3.99 1,000 610116 .....$19.29 613116 .....$21.99 611216 ..... $21.59 612116 .... $21.59 15,000 610129 ..$238.99 613129 ...$276.99 611229 ..$283.19 612129 .. $283.19

8 x 1" 100 610104 ....... $3.79 613104 .......$4.29 611204 ...... $4.39 612104 .......$4.39 1,000 610117 .....$21.99 613117......$25.39 611217 ..... $24.69 612117 ..... $24.69 10,000 610130 ...$181.79 613130 .. $213.29 611230 ..$216.89 612130 .. $216.89

8 x 11/4" 100 610105 .......$3.89 613105 .......$4.49 611205 ...... $4.69 612105 .......$4.69 1,000 610118 .... $23.29 613118 ..... $27.29 611218..... $26.59 612118 .... $26.59 7,500 610131 .. $143.89 613131 ... $172.89 611231 ... $175.39 612131 ...$175.39

8 x 11/2" 100 610106 .......$4.49 613106 ........$5.79 611206 ...... $5.89 612106 .......$5.69 1,000 610119 .... $28.89 613119 .....$33.39 611219 ..... $32.69 612119 .... $32.69 5,000 610132 ....$117.72 613132 ...$141.09 611232...$143.09 612132 ..$143.09

8 x 13/4" 100 610107 ....... $4.79 613107 .......$5.99 611207 ....... $6.19 612107 ........$6.19 1,000 610120 .... $31.39 613120 ..... $35.79 611220 ....$34.59 612120 .... $34.55 4,000 610133 .... $96.19 613133 ...$121.19 611233 ..$122.19 612133 .. $122.19

8 x 2" 100 610108 .......$5.09 613108 .......$6.29 611208 ...... $6.59 612108 .......$6.59 1,000 610121 .... $34.49 613121 .....$38.39 611221 ......$37.89 612121 .....$37.89 3,500 610134 .... $91.39 613134 ...$113.59 611234 ..$114.99 612134 .. $114.99

8 x 21/4" 100 610109 .......$6.19 613109 ........$7.39 611209 ....... $7.59 612109 ....... $7.59 500 610122 .... $20.39 613122 .....$22.69 611222..... $21.99 612122 .... $21.99 3,000 610135 .... $95.49 613135 ...$105.05 611235 ..$116.99 612135 .. $116.99

8 x 21/2" 100 610110 .......$6.49 613110 ........$7.89 611210 ....... $8.19 612110 .......$8.19 500 610123 .... $23.69 613123 .....$24.59 611223 ....$23.99 612123 .... $23.99 2,500 610136 .....$85.79 613136 ... $104.79 611236 ..$106.09 612136 .. $106.09

8 x 3" 100 610111 .......$8.49 613111 .....$10.39 611211 ..... $10.69 612111 .....$10.69 500 610124 .... $28.29 613124 .....$31.49 611224..... $31.49 612124 .... $31.49 2,000 610137 .....$76.49 613137 .....$89.59 611237 ..... $92.49 612137 ..... $92.48

10 x 11/2" 100 610206 .......$5.39 1,000 610219 .... $30.89 4,000 610232 .. $113.29

10 x 2" 100 610208 .......$6.19 1,000 610221 .... $38.09 2,500 610234 .... $82.29

10 x 21/2" 100 610210 ........$7.69 500 610223 .....$25.49 2,000 610236 .... $85.49

10 x 3" 100 610211 .......$8.89 500 610224 .... $29.86 1,500 610237 .....$75.19

BLACK OXIDE finish is a decorative coating that will provide a clean finished appearance, even in visible areas of assembly.CLEAR ZINC plating is primarily a decorative finish commonly found on most general hardware. It provides a moderate amount of corrosion resis-tance but is recommended for interior applications.YELLOW ZINC plating gives these screws a golden color that resembles brass and provides a moderate amount of corrosion resistance.HIGHPOINT® Cabinetry Screws offer solutions to all of your Cabinetry needs. We now have a complete line of Cabinet hanging, drawer front and drawer slide mounting screws. View our entire selection online or visit one of our retail locations.Woodcraft now offers top quality HIGHPOINT® Driver Bits and Bit holders.

HIGHPOINT® Cabinet Hanging ScrewsThese hanging screws are manufactured with a heavy duty #10 body and a large diameter washer head to prevent the fastener from pulling through the cabinet back. #2 Square Combo Drive. Packs of 100 Zinc Plated#10 x 21/2" 618100 $14.39#10 x 3"″ 618101 $16.49

White Painted Head 618104 ...$17.49 618105 ..$22.09

HIGHPOINT® XT Flat Head Screw Assortment KitEach assortment contains (2) #1 x 2″" and (2) #2 x 2"″ Driver Bits and #1 and #2 Hand Drivers, and (50) each of the fol-lowing sizes: #6 in 1/2″", 3/4″" and 11/4″" lengths; #8 in 3/4 ", 1"″, 11/4"″, 11/2"″, 13/4"″, 2"″, 21/4", 21/2"″, 3" lengths and #10 in 11/2"″, 2"″, 21/2"″, 3"″ lengths.619169 ......................................................$51.49

Clock Supplies


High�Quality�Seiko�

Movement!

SEIKO�Precision�36mm�Clock�InsertsSolid alloy brass plated cases and glass lenses give an extra special “look” to these clock movements. This insert has the easiest battery access we’ve seen! Choose from white or gold dial. Battery included. Requires 13/8" diam., 3/8" deep mounting hole. Each 5+127256 white/Arabic ........... $14.50 .......$13.05127257 white/Roman ......... $14.50 .......$13.05�142329 gold/Arabic ............. $14.50 .......$13.05142330 gold/Roman ........... $14.50 .......$13.05125938� 13/8" Forstner bit ...... $8.50

Pocket�Watch�Pull�And�Chain. This is a heavy weight, 12" long gold finish chain with a belt clip on one end and a screw-in post on the other. Each 5+145955 .........................................$4.99 .... $4.49

(D)�Photo�Frame is a great accessory to the mini-clock inserts. Simply remove the back of the case and insert your favorite photo. Each 5+125123 ..........................................$2.99 .... $2.69

Mini-Quartz�Clock�InsertsThese wrist watch size mini-quartz movements are perfect for setting into box lids, your special carving, a scroll-sawn desk set or table top timepiece. Each move-ment is housed in a plastic case, equipped with a second hand, brass plastic bezel, and stem set-ting mechanism. Quartz analog movement is made by a major clock manufacturer, accurate to within one second a day and powered by a silver oxide watch battery (included). Spring-fits into a 13/8" diameter, 1/4" deep hole. Quantity pricing is for 5+ of any combination of Mini Quartz Clock Inserts. Each 5+ 09G11 (A) brass dial, Arabic .........$9.99 ... $8.99�00038 (E) black-gold .....................$9.99 ... $8.99125117 (H) easy to read Arabic .....$9.99 ... $8.9909G10 (B) white dial, Arabic .........$9.99 ... $8.99125116 (F) fancy Arabic ..................$9.99 ... $8.9900036� (I) white dial, Roman .........$9.99 ... $8.99125119 (C) ivory Roman .................$9.99 ... $8.99125118 (G) fancy Roman ................$9.99 ... $8.99142327 (J) white/antique ............ $10.50 ... $9.45142328 (K) ivory/black ................ $10.50 ... $9.45125938� 13/8" forstner bit ............... $8.50

A

EB

CD

FG

HI

KJ

Depth 5/8"

21/8"

21/8" � Part�#� Dial� Each� 5-9� 10-24� 25+3609X14 0 -1/4" thick $3.99� $3.59� $3.23� $2.913609X38 1/4"-3/8" thick $3.99� $3.59� $3.23� $2.913609X58 3/8"-5/8" thick $3.99� $3.59� $3.23� $2.913609X34 5/8"-3/4" thick $3.99� $3.59� $3.23� $2.91

Mini-Quartz�MovementsPrecision built Mini-Quartz Movements, accurate to within 10 seconds per month, are the ideal choice where minimum depth is required. Runs over 1 year on a single “AA” battery (not included). Includes removable hanger, rear time set and on/off switch and all necessary mounting hardware. Choose your free set of hands, up to 5", from page 132. 21/8" x 21/8" x 5/8" deep, and will fit neatly into a 3" diameter hole.

3"�Clock�Fit-Up�Bit. Economical bit is perfect for drilling holes for the Mini-Quartz Movements.125951 ..................................................................................................... $20.99

Chandler�Skeleton�MantelClockProudly display your woodwork-ing skills by build-ing this lovely mantel clock. Included are the plans, hardware, and glass. Just add wood, finish and a little of your time. The rotating gears of the brass quartz skeleton move-ment are fully visible. Included are a brass-plated aluminum dial, remote second hand, black hour and minute hands. Two mounting posts on the bottom provide easy mounting to a base. Requires one AA battery (not included). Dimensions of finished clock: 83/4"W x 37/8"D x 81/4"H.148426 .........................................................$46.99

Drawer�Front�Adjusting�ScrewsDrawer front screws have an oversized 1/2" diameter round washer head for easy drawer front adjustment. Simply drill an oversized hole (5/16" to 3/8") through the drawer box and attach the front. Loosen the screws to allow for perfect alignment, and tighten to finish the job. You’ll also find these oversized round washer head screws useful for attach-ing tabletops, jig construction and mount-ing various brackets and other hardware. #2 Phillips Drive, Zinc Plated Steel.#8�x�7/8"″� 617100� 100�............................... $5.99�� 617105 1,000 ......................... $29.89#8�x�1″"″� 617101� 100�............................... $6.29�� 617106 1,000 ..........................$34.99#8�x�11/8"�617102� 100�............................... $7.19�� 617107 1,000 ..........................$39.09#8�x�11/4″"�617103 100�................................$7.39�� 617108� 1,000 ......................... $41.19

Bracket�Clock�Plan�And�Hardware�KitThis classic cabinet was designed in England during the 17th century. The bail handle was used to carry the clock from room to room. Drawn full size so you can lay out the parts directly from the plan! Hard-ware pack includes a Westminster chime quartz movement, embossed meta l dial, black serpen-tine clock hands, bail handle, mock key with plate, hinges, magnetic catch and turn buttons. Wood, wood finish, miscellaneous fasteners, battery and glass not included. Finished clock measures 14"H x 11"W x 61/2"D.145795� plan................................................$15.99145796� hardware kit .................................. $57.50

HIGHPOINT®�305�Stainless�Steel�Woodworking�ScrewsBugle�Head,�Square�DriveOur Stainless Screws are perfect for virtually all of your exterior applications. Compatible for use with treated woods (ACQ), acidic woods like Red Cedar and Redwood and long-life composite materials and feature such a type 17 self-drilling point, flush-seating Bugle head design and a “stick-fit” square drive recess. Note: All sizes will have 0.345" head diameter to accommodate the #2 Square Drive recess. Packages of 100. See www.woodcraft.com for additional sizes and quantities.619105 #8 x 3/4" ..........................................$6.29619107 #8 x 11/4" ........................................$8.89619108 #8 x 15/8" ..................................... $11.29619109 #8 x 2" ......................................... $15.19619110 #8 x 21/4" ......................................$15.79619111 #8 x 21/2" ......................................$16.79619112 #8 x 3" ......................................... $20.59

619113 #10 x 1" ........................................$10.59619114 #10 x 11/4" .................................. $12.39619115 #10 x 11/2" ................................... $14.59619116 #10 x 13/4" ....................................$17.09619117 #10 x 2" ........................................$18.99619118 #10 x 21/4" .................................. $20.89619119 #10 x 21/2" ................................... $20.09619120 #10 x 3" ....................................... $24.09

Clock Supplies


Second� Hands� for� Quartz� move-ments. When selecting a Second Hand, be sure size is less than 1/2 time ring dimension. Not shown actual size.

11/2"

23/8"

4894X 11/2" .......Black ........$1.994794X 11/2" ....... Gold .........$1.99

4896X 23/8" .......Black ........$1.994796X 23/8" ....... Gold .........$1.99

4"

3"4890X 3" ...........Black ........$1.994790X 3" ........... Gold .........$1.99

4892X 4" ...........Black ........$1.994792X 4" ........... Gold .........$1.994592X 4" ............Red .........$1.99

HandsAll mechanical movements in-clude one pair of hands at no charge. Sorry, no substitutions. For a perfect fit it may be necessary to clip the ends of minute or hour hands that are too long. Choose style of hand from illustration below. Check chart for sizes that are available for your dial or time ring size.

Time Ring

Serpentine Spade

TerryB

A

� Mechanical�Movements� Quartz�Movements�Time�Ring� Black� Price� Black� Gold� Price� � Spade35/8" - 33/4" 4900X� $4.99� 4800X� 4700X� $2.2543/8" - 41/2" N/A� � 4802X��4702X� $2.2547/8" - 5" 4904X� $4.99� 4804X� 4704X� $2.2551/2" - 53/4" N/A� � 4806X� 4706X� $2.257" - 71/4" N/A� � 4808X� 4708X� $2.2571/2" - 8" 4910X� $4.99� 4810X� 4710X� $2.259" - 91/4" N/A� � 4812X� 4712X� $2.2510" - 101/2" N/A� � 4814X� N/A� $2.25 Serpentine35/8" - 33/4" 4920X� $4.99� 4820X� 4720X� $2.2543/8" - 41/2" 4922X� $4.99� 4822X� 4722X� $2.2547/8" - 5" 4924X� $4.99� 4824X� 4724X� $2.256" - 61/4" 4926X� $4.99� 4826X� 4726X� $2.2571/4" - 75/8" 4928X� $4.99� 4828X� 4728X� $2.2591/2" -101/4" N/A� ��$4.99��N/A�� 4730X� $2.25 Terry25/8" - 23/4" N/A� � 4836X� N/A�� $2.2553/8" - 51/2" 4938X� $4.99� 4838X� 4738X� $2.2571/4" - 71/2" N/A� � 4840X� 4740X� $2.25 OtherA. 91/4" - 91/2" N/A� � � N/A�� 4770X� $2.25B.�21/2" - 9" N/A� � 4880X� 4780X� $2.25

Lyre�PendulumAdd the ultimate finish-ing detail to your fine heirloom clock. Features brass and steel rods with a polished brass bob. Lyre pendulums will swing in an arc slightly less than regular pendulums.115mm for 3260X, and 3262X.3509L 41/2" bob ........... .............. $47.99 Pendulum�Length:Pendulum length is measured from the center of the hand shaft to the center of the bob.

Franz�Hermle�&�Sohn�Clock�Co.The Hermle Company was founded on old world values and skills. Today, the Hermle Company is the largest move-ment manufacturer in the world with several sophisticated plants, including one in Amherst, Virginia, where many of their grandfather movements are produced. The sons and grandsons of Franz Hermle strive to develop innovative manufacturing techniques and products.

�Our best seller, the Westminster/Triple Chime has an 8-day chain driven movement precision built from hardened brass with machined steel pinions and pallets. Hardened steel pivots minimize bearing friction and eliminate corrosion. Pivots are polished, nickle-plated hardened steel. It features an automatic beat adjustment that makes the initial setup and adjustment of the move-ment extremely simple. The 3262X movement plays, in addition to the Westminster, the Whittington and St. Michael chimes. A lever is pro-vided to switch from one melody to another. Movement complete with black serpentine hands, polished

brass pendulum bob, chains, brass weight shells, and weight fillings. 24 month guarantee.For more info, visit woodcraft.com!(A)�Westminster�Chime3260X 321/4" pendulum, 41/2" bob ... .................................$344.99(A)�Triple�Chime3262X 321/4" pendulum, 41/2" bob... .................................$409.99

(B)�High�Arch�Moondial. Brass plated aluminum, 11" wide x 151/2" high. Corners and centers are acid etched brass with gold fill. Fits both 3260X and 3262X. Time ring is 91/2", 4 lbs.140785 ................................$147.99

Westminster�Chime�And�Triple�Chime�Chain�Driven�Movements

Pendulum�Length

93/4"

3260Depth�53/4"

3262Depth�61/2"

3262/60Swing�9"

71/4"

A

B

Cloth�Backed�Felt�SheetsUsed in the furniture industry as jewelry and silver case liners, this is the perfect lining felt for all your fine projects. The cloth back ensures the

felt doesn’t tear, stretch, or crease like lower quality, un-backed sheet felt. This high quality felt has virtually no lint, and the cloth back helps prevent “fuzzing” along cut edges. Coated with pressure sensitive adhesive for simple peel and stick application. Sheets are 353/4" long x 23" wide.142215� green ...................... $29.99142216� maroon ................... $29.99142217� grey ......................... $29.99142218� royal blue ............... $29.99

Highlander�Weather�StationThis package contains the plans and hardware to build a Highlander Weather station, which includes a clock, barometer, hygrometer and Galileo Ther-mometer Tube. All you need is the wood and finish to complete this beautiful piece. The instrument bezels are 23/4" and require a 23/8″" diameter hole. The clock movement requires an “N” battery that is not included.148425� weather station .........................$47.99125946� 23/8"″ Forstner Bit ...................... $15.99

Clock Supplies


H

1/2" Conventional Modern Open Modern Closed

Caning�SuppliesWoven�Natural�Cane. For chairs that use a groove and spline around their edge to secure cane. We offer 3 styles of woven cane, all are sold by the running foot. Illustrations are actual size.1/2"�Conventional�Weave50B41 14" width ................................. per ft.�$3.9950B51 18" width ................................. per ft.�$4.9950B61 24" width ................................. per ft.�$6.99

Modern�Open�Weave50C11 18" width ................................. per ft.�$4.9950C12 24" width ................................. per ft.�$6.99

Modern�Closed�Weave50C21 18" width ................................ per ft..�$4.9950C22 24" width ................................. per ft.�$6.50

Reed�Spline. Secures woven cane into seat and panel grooves. Size is determined by groove width. Sold in 10 ft. lengths, illustrations are actual size. Groove Spline Width Width(A)�50C31 11/64" .........9/64" .......................... $1.75(B)�50C41 13/64" ........ 11/64" ......................... $1.99(C)�50C51 7/32" .......... 3/16" .......................... $1.99

A B C

Chair� Caning� Kit contains all the material and in-structions need-ed to hand cane a chair. Includes fine chair-cane, binder cane, awl, pegs and illustrated instruction book.50B20� ........................................................ $16.50

The Caner's Handbook By Miller & Widess. A descriptive guide with step-by-step photos on restor-ing cane, rush, splint, Danish cord, rawhide, and wicker. 143 pgs, softcover.10B75 ....................................................... �$18.95

Project�MirrorsThis wide selection of mirrors can be used in a variety of applications to add a unique look to your woodwork-ing projects. They’re great for hand mirrors, compacts, displaying small projects, or as an accent inside a box lid. All mirrors are 3mm thick and precision ground and have a 5mm beveled edge. A special Woodcraft “hint and tip” sheet with mounting techniques and ideas for special projects is included. Sorry, scalloped edge and octagonal mirrors are no longer available. Shape Size Each 4+17T01 rnd. ....3"......$3.99 ... $3.5917T02 rnd. ....4" ......$4.99 ....$4.4917T03 rnd. ....5" ......$6.99 ... $6.2917T04 rnd. ....6"......$9.50 ... $8.5517T05 oval 3" x 5" ..$8.50 .... $7.6517T06 oval 4" x 6" ..$8.99 ... $8.0917T07 oval 5" x 7" ..$9.99 ... $8.99

Weather�InstrumentsCreate your own weather station! Thermometer is scaled in both Fahrenheit and Celsius, Hygrometer measures the amount of moisture in the air (humid-ity), and the Barometer indicates weather trends over a period of time by registering changes in atmospher-ic conditions. Can be combined with matching clock fit-ups. All bezels are 23/4" in diameter and mount in a 23/8" diameter hole. To operate properly, all the

Hygrometer

Barometer

Clock

Thermometer

Brass�BezelIvory�Dial

Brass�BezelBrushed�Gold�

Dial

instruments should be vented to allow quick adjustment to changes in the atmosphere. Barometer should be used at altitudes below 6,000'. Model 5314M

and 5315M require "N" battery which is not included. Kit includes plans and 3 instruments with (*) below.146832 weather station kit w/plan. ..........$32.50

Brushed�Gold�Dial�with�Brass�Bezel� Each 5+ 5303T thermometer ................ $9.50 ........$8.555304H hygrometer................. $10.50 ........ $9.455305B barometer .................. $18.99 .......$17.095312K set of 3 above ............$29.99 ......$26.995306T clock fit-up Arabic ......$24.99 ......$22.495307T clock fit-up Roman ....$24.99 ......$22.49

Ivory�Dial�with�Brass�Bezel� Each 5+5308T(*)��thermometer ............. $9.50 ........$8.555309H(*)�hygrometer .............. $10.50 ........ $9.455310B(*)��barometer ............... $18.99 .......$17.095313K set of 3 above .........$29.99 ......$26.995314M clock fit-up Arabic ....$17.50 ...... $15.755315M clock fit-up Roman.. $16.99 ......$15.29

Quartz�Clock�Fit-UpsThese fit-ups are made in America but feature a diamond cut brass or black finished metal bezel manufactured in the Black Forest of Germany. Selection includes 23/4" and 37/8" diameter fit-ups in both Arabic (A) and Roman (R) numerals featuring dial backgrounds of Classic White (CW), Classic Ivory (CI), and Fancy Gold (FG). The 23/4" diameter fit-ups are also available in a Classic White dial with a black (B) bezel. The 23/4" fit-ups require a 13/16" deep by 23/8" diameter hole and use one AAA battery (not included). The 37/8" fit-ups require a 5/8" deep by 31/8" diameter hole and use one AA battery (not included).

A AB

C

(A)�37/8"�Diameter�Brass�Bezel Style Face Each 5+142321 A .........CW ..............$12.99 .... $11.69142322 R .........CW ..............$12.99 .... $11.69142323 A ..........CI ...............$12.99 .... $11.69142324 R ..........CI ...............$12.99 .... $11.69142325 A ......... FG ..............$13.99 .... $12.59

(B)�23/4"�Diameter�Black�Bezel142316 A .........CW .............. $10.99 .......$9.89142317 R .........CW .............. $10.99 .......$9.89

(C)�23/4"�Diameter�Brass�Bezel Style Face Each 5+142314 A .........CW .............. $10.99 .......$9.89142315 R .........CW .............. $10.99 .......$9.89142318 A ..........CI ............... $10.99 .......$9.89142319 R ..........CI ............... $10.99 .......$9.89142320 A ......... FG ..............$11.99 .....$10.79

125946 23/8" Forstner bit .......................$15.99125952 31/8" Forstner bit .......................$22.99142348 AAA alkaline battery ...................$0.89142349 AA alkaline battery ......................$0.89

Enameled�And�Paper�Dials(A)�Shaker�Style�Dial. 11" x 11", time ring is 91/2". Each 5+7415S� .........$21.99 .... $19.79

(B)�Hancock�Dial 8" x 8", 7" time ring. 7414S .......... $15.50 ....$13.95

(C)�Mission�Style�Paper�Dial11" x 11", time ring is 93/8", paper.128395� ............ $4.99 ...... $4.50

B CD

E

F

GIA

(D)�Shaker�Style�Dial�11" x 143/4", time ring is 91/2". Each 5+7421S� ��..........$27.99 ... $25.20

(E)� Enameled� Dial. 113/4" diameter, time ring is 101/4". 7402S� ......... $16.50 ....$14.85

(F)�Mission�Style�Paper�Dial3 7/8" dia., time ring is 31/2", Arabic.124895�� .............$3.99 ..... $3.60

(G)�Cottage�Clock/Crystal�Regulator. 6" diam., time ring is 43/4". Arabic.7419S� .........$12.99 ....$11.69

Note: If you order any dial separately, you must specify the Woodcraft movement it is to be used with - we will punch the correctly positioned key holes for you.

(H)�Paper�Dials We do not punch holes in paper dials. Time Ring Diameter 10+

2820P5 5" ..........$3.50 ......$3.152820P55 51/2" ......$3.50 ......$3.152820P65 61/2" ......$3.50 ......$3.152820P7 7" ..........$3.50 ......$3.152820P8 8" ..........$3.50 ......$3.15

(I)�Shaker�Style�Dial11" x 11", time ring is 91/2". 5+ 7416S�� .......... $19.99 .... $17.99

Project Supplies


Drop Point Skinner Knife Kit This dropped point blade is made from 5/32" thick 6A high carbon stainless steel with a 35/8" hollow ground and highly polished blade section. Just shape, mount and finish your custom handles for a one of a kind, high quality knife. Kit comes with blade, three brass scale pins and instructions. Scales (handles) and 30 minute epoxy not included. 81/4" overall length. Each 2+147830 .................................. $24.99 ....$22.49

Knife Kit Scales for the Drop Point Skinner Kit. 3/8" x 5" x 11/2".131582 Bolivian rosewood (2 pc.) ............$4.99131583 cocobolo (2 pc.) ...........................$5.99131584 bocote (2 pc.) ...............................$4.99

A

B

C

Ceramic Knife BladesKnives must be sharp to cut properly, especially kitchen knives. Anyone who’s ever used a kitchen knife to “squish” a tomato understands this point very well. Leave the hassles of sharpening behind with ceramic because they come sharp and stay sharp...almost forever. Whether slicing a tomato or cutting up vegetables or slicing stew meat, you can’t beat a ceramic knife and now you can easily make your own ceramic knife. Each blank comes with instructions. Available in white or black and 3 lengths. Black Style Length White Style149636 A ...$29.99 4" 149635 A .... $19.99149638 B ...$39.99 5" 149637 B ....$29.99149640 C ...$49.99 51/2" 149639 C ....$39.99

WoodRiver® Knife Kits It's easy to build beautiful custom knives that everyone will admire. Kits come with screw together scale (handle) rivets and either high carbon steel or the striking looking Japanese laminated steel blades. Blades are pre-shaped and ground, just pick your favorite wood for the scales and create a truly one of a kind knife. Kits include the blade, rivets and instructions. Scales (handles) and 30 minute epoxy not included. Countersinks listed below make a perfectly centered countersink for the head over the rivet shaft hole. Models A and B use counter sink A, Model C uses countersink B, Model D uses countersinks A and B, below.

(A) Skinner Knife Kit. 6" overall length, 21/4" high carbon steel blade. Knife scales not included. Each 2+148357 .................................. $15.50 ....$13.95

(B) Drop Point Hunter Knife Kit. 71/4" overall length, 3" high carbon steel blade with finger grip relief make this a great general purpose hunting, fishing or camping knife. Knife scales not included.148358 .................................. $15.50 ....$13.95

(C) Spear Point Knife Kit. 81/2" overall length, 41/4" blade length. Single edged. Knife scales not included.148362 .................................. $20.50 ....$18.45

(D) Tanto Style Knife Kit. 111/2" overall length, 61/8" blade length. Specialized blade shaped for penetra-tion. Knife scales not included.148359 .................................. $31.99 .... $28.79

Laminated Steel Knife Kits. The pattern of the steel laminations on these blades makes each blade truly unique. The swirling, waving lines of the laminations combined with your custom handle will make knives which stand out from the ordinary. Use countersink B, below.

(E) Small Laminated Steel Knife Kit. 7" overall length, 31/8" blade length. Knife scales not included. Each 2+148361 .................................. $40.50 ....$36.45

(F) Large Laminated Steel Knife Kit. 91/4" overall length, 5" blade length. Knife scales not included.148360 .................................. $70.50 ....$63.45

Knife Rivet Countersinks make perfect centered rivet head countersinks in your knife handles.148553 countersink size A ......................$9.99148554 countersink size B ......................$9.99

A BC D

E

FWood Sold Separately

Samples Shown As Finished Kits

Stainless Steel 16 Ounce Travel Mug Turning KitCreate a custom travel mug ! You can either turn the outer liner using a stave con-figuration or simply use solid wood blocks. Although this kit is for an experienced turner, you will find that the hollowing techniques are easy to execute and the results are nothing short of amazing. Kit contains 16 ounce stainless steel travel mug liner with lid and detailed instructions. Butternut blank, 4"x4"x8", sold below. Each 4+836527 .....................................$9.99 .........$7.99 Each 6+148542 butternut blank ........ $16.99 ......$15.29

Wood Sold Separately

JJ’s Knife KitsDesigned and crafted to introduce young people to the art of wood-working, JJ’s Knife Kits offer preci-sion laser cut parts that assemble to create a fun and unique knife. The Original kit features a cherry canoe style knife blade with a maple body, while the Trapper knife kit is a two bladed knife with a walnut body and maple blades. Once assembled these knives work, and feel, like a real pocket knife. Perhaps the best part is that you get to finish them anyway you want. Original is 61/8" L open, 37/16" closed. Trapper is 61/4" L open, 37/16" closed.150972 (A) original ....................................$9.99150973 (B) trapper ....................................$9.99

A

B

Hobo Pocket KnifeThis handy 33/4" pocket knife has a 27/8" clip point blade and a 3-tined fork with bottle opener. Clever design permits the knife to be separated into knife and fork so you can eat like a civilized person when you’re on the jobsite, in the shop or in the doghouse.150264 ....................................................$19.99

Rare Earth Magnets, Washers, & CupsRare earth magnets are recognized for their superior magnetic force and sheer holding power, and these magnets are true to their word. Use for small lidded boxes, cabinet doors, or applications where normal lid or door closing hardware is aesthetically unap-pealing. Our washers and cups are all countersunk for use with flat head screws, the 3/8", 1/2", and 5/8" are packaged with ten #4 x 1/2" screws and the 7/8" and 11/8" are with six #10 x 5/8" screws. The exterior of the 3/8" cups have a ribbed outer surface designed to be press fit or glued into a 3/8" x 1/4" deep hole. All measurements given are outside diameter (O.D.) and represent the counter bore to fit the magnets, washers, or cups.(A) Magnets Width x Height150949 1/4" x 1/10" (10-pc.) ..................... $3.50150950 3/8" x 1/10" (10-pc.) ..................... $4.99150951 1/2" x 1/8" (10-pc.) ........................$7.99151008 3/4" x 1/8" (6-pc.)......................... $9.99150952 1" x 1/8" (6-pc.) .........................$13.50

(B) Washers150953 3/8" x 1/8" (10-pc.) ...................... $4.99150954 1/2" x 1/8" (10-pc.) ....................... $5.99150955 5/8" x 1/8" (10-pc.) ...................... $6.99150956 7/8" x 5/32" (6-pc.) ....................... $6.99150957 11/8" x 5/32" (6-pc.) ..................... $8.99

(C) Cups150958 3/8" x 1/4" (10-pc.)...................... $4.99150959 1/2" x 1/4" (10-pc.) ....................... $5.99150960 5/8" x 1/4" (10-pc.)....................... $5.99150961 7/8" x 9/32" (6-pc.) ....................... $8.99150962 11/8" x 9/32" (6-pc.) ..................... $9.99

A CB

Box-Making Basicsby David M. Freedman. A detailed step-by-step guide to the basics of making 15 different wooden boxes. Woodworkers of all skill levels will discover how to make at-tractive items for personal use or as gifts. Boxes presented in this text actually require very little material stock and a minimally equipped shop to make. More than a cut-list approach to box making, this book includes wide ranging projects of different styles from basic to complex designs. 144pg., softcover.127269 .......................................................$19.95

Project Supplies


A

B

Ceramic Pepper Mill MechanismsWood Mechanism - create traditional as well as up-side-down mills. The simplest design is 4 to 8 inches high, but you can build a mill as tall as you desire.

Shaft Mechanism - create new and innova-tive stopper designs. This mechanism can be mounted using the built-in “catchers” or glued in place. The top is fixed into the stopper, which can be removed to re-fill the mill. Mill height can range from 5 to 12 inches.146927 (A) wood mechanism $13.50146928 (B) shaft mechanism $15.99

Best Value – Save over 10%! Buy a complete pepper mill kit and save. Each kit contains one 3" x 3" x 12" wood blank, a ceramic shaft pepper mill mechanism (146928) and the book Salt Shakers & Pepper Mills (147872) by J. R. Beall.147886 maple ......................................... $31.99147887 cherry ......................................... $35.99147888 walnut .........................................$37.99

A

B


Stainless Steel Pepper Grinder MechanismsThese tempered stainless steel mechanisms are finely made in the USA. Most grinder kits require a precisely bored through hole, but the unique mount-ing hardware of our kit allows slight inaccuracies in your turning. Easy to assemble and install, these mechanisms can be adjusted from extra coarse to an extra fine grind. Kit comes complete with instructions and includes a FREE Salt Shaker Top and Bottom Plug (see below). Wood not included.126637 4" kit ............................................$14.99126638 6" kit ...........................................$16.99835290 8" kit ........................................... $17.50126639 10" kit ......................................... $17.99845377 12" kit ........................................ $18.50126640 14" kit ........................................ $18.99Stainless Steel Shaker Tops And Plastic Plugs. Make your own salt shakers! Stainless steel shaker tops snap into place and plastic bottom plugs al-low easy refilling. Kit includes 4 tops and 4 plugs (not pictured).126725 .................................................... $8.99

Includes FREE Salt Shaker Top & Bottom Plug!


Detachable Key RingThis detachable ring has positive attachment, yet releases easily for keys you need to occasionally separate. Can be turned with a simple straight body, or create your own unique custom profiles. Standard gold finish. Overall length is 31/4", uses 1/2" x 1/2" x 2 1/8" blanks, requires 7mm bit, bushings and mandrel. Each 10+ 20+144641 .................. $5.99 ....... $5.39 ......$4.79


Shotgun Shell Key ChainDesigned for the hunting enthusiast, the 12 gauge shotgun shell is a universally known round among shot gunners. Create a unique key chain for yourself, or for the outdoorsman in your life and organize your keys at the same time!150969 gold ...............................................$9.99150970 chrome .........................................$9.99150971 bushings .......................................$5.99

B

A

Burl Wood Knife ScalesPremium exotic burl wood species, selected and cut for color and grain patterns. Scales measure 1" thick x 11/2" wide x 5" long to allow for re-sawing to the thickness necessary for your knife making project.151010 (A) amboyna burl........................ $17.99151011 (B) afzelia burl ............................ $17.99

Circuit Board Twist Key Chain With 2GB Drive KitJust like the circuit board pen kits that you have grown to love, now you can have a key chain that matches - but with a twist. Hidden inside this unique kit is a 2GB self starting jump drive, simply plug and play! There is no cutting, drilling or gluing required. Square off the ends, mount on your mandrel with the required bushings and start turning. Shown as assembled.150291 gold kit ........................................$39.99150292 chrome kit ..................................$39.99150293 bushings .......................................$4.99

Ron Hock Hand Plane KitThis precision made kit provides a quick, sure way to realize the satisfaction of using a handmade wooden plane. Complete with a Hock plane-iron assembly all you need is a drill, some clamps, glue, a knife to adjust the throat, sandpaper (or plane) to true the sole, and a means of sharpening the iron. A Hock kit is ideal for the novice as well as the professional woodworker who can’t find the time to make a plane. The design is a basic Krenov-style, flat-bottom wooden plane simple and elegant. The plane is constructed from Jarrah. 11/2" iron width x 11", finished length.150545 ....................................................$99.99


Spices for Salt & PepperGrindersGourmet chefs and food critics alike all know that the secret to making an ordinary meal extraordinary is to use only the best ingredients, and the spices that you season with are no exception. Our Chef’s Blend of Bouquet Peppercorns is a custom blend of four varieties of peppercorns providing a full robust flavor. Our White Solar Sea Salt Crystals are produced naturally by harnessing the power of the sun and wind to evaporate water from the Great Salt Lake in Utah, providing you with the purest of all salts, and the best for you. 151322 solar sea salt crystals, 5.6 oz. .......$3.99151323 chef’s blend bouquet peppercorns, ....... 2.5 oz. .............................................$5.99

Ron Hock Shoulder Plane KitThis precision made kit provides a quick, sure way to realize the satisfaction of using a handmade wooden plane. Complete with a 3/4" Hock plane-iron all you need is a drill, glue, clamps, a knife to adjust the throat, sandpaper to true the sole, and a means of sharpening the iron. The plane is constructed from Bubinga and Beech. 3/4" iron width x 10" finished length.151095 ....................................................$89.99

A

Salt Mill MechanismsDesigned to last a lifetime, our salt mill mechanisms feature a fully adjustable ce-ramic grinding mechanism for a consistent grind and ultra smooth operation. Simply adjust the knurled “S” knob on top of the mill to select a grind from extra fine to extra course. USA. Wood not included.151324 4" .................................................$10.99151325 6" ................................................ $11.99151326 8" (A) ..........................................$12.99151327 10"...............................................$13.99151328 12" ..............................................$14.99151329 14" ...............................................$15.99

Project Supplies


Miniature Hanging Ornament KitsCreate stunning decorat ive and functional hang-ing ornaments with these Woodcraft exclusive turning kits. Choose from the three 24k gold plated “end cap” styles and add your wood and turning creativity for amazing results. Overall length of the completed hanging ornaments is approximately 27/16" and the “turned” body is approximately 13/8" in length. Requires a 7mm brad point or pen makers drill bit, mandrel and pen/pencil bushings 06R03. Style Each 10+ 20+126199 A .............$4.99 ........$4.49 ...... $4.24126206 B .............$4.99 ........$4.49 ...... $4.24126213 C .............$4.99 ........$4.49 ...... $4.24

BA CTapered Plugs & Buttons(A) Tapered Plugs fit counterbores to cover screw holes completely. Each plug is tapered with an oversized head for a tight fit. Length 1/4".Maple Dia. Bag of 100 5+ Bags50K11 ........3/8" ..........................$2.99 .......... $2.7050K21 ........1/2" ..........................$4.99 ..........$4.49

Walnut Dia. Bag of 100 5+ Bags17P11 ........3/8" ..........................$5.50 ..........$4.9517P22 .......1/2" ..........................$5.99 ..........$5.39

Oak Dia. Bag of 100 5+ Bags17U11 ........3/8" ..........................$4.50 ..........$4.0517U14 ........1/2" ..........................$4.99 ..........$4.50

(B) Dowel Buttons. Used in furniture making to cover holes made by wood screws and dowels. Tenon Head Maple Dia. Dia. Bag of 100 5+ Bags

17O10 .....3/8"........1/2" ...............$4.99 ..........$4.5017O40 ..... 1/2" ....... 5/8" ...............$4.99 ..........$4.5017O64 ..... 3/4" ........7/8" ...............$8.50 ...........$7.6517O65 ......1" ....... 11/8" ............$14.99 ........$13.49 Tenon Head Oak Dia. Dia. Bag of 100 5+ Bags17O21 .....3/8" ........1/2" ........... $4.99 ............ $4.5017O26 .....1/2" ....... 5/8" ........... $4.99 ............ $4.5017O66 .....3/4" ........7/8" ..........$11.99 .........$10.8017O77 ......1" ........ 11/8" ......... $22.99 .........$20.70

A B

Shaker KnobsCan be installed in the traditional fashion with their tenon (slightly oversized), or secured with a wood screw if the tenon is cut off. Your choice of maple or cherry wood in two sizes. Unfinished. Quantity prices on request.

Maple Shaker Knobs- 11/4" dia. 1/2" tenon. Bags of 10. 1 bag 5 bags 10+ bags125433 each ..........$9.50 ........ $8.07 ......... $6.65Maple Shaker Knobs-2" dia. 3/4" tenon. Bags of 10. ..... 125444 each .......$16.99 ......$14.44 ...... $10.89

Cherry Shaker Knobs-11/4" dia. 1/2" tenon. Bags of 10.

125437 each ........ $16.99 ......$14.44 ....... $10.89

Cherry Shaker Knobs - 2" dia. 3/4" tenon. Bags of 10.125448 each ....... $39.99 .... $33.99. ....... $27.99

11/4" DiameterShaker Knob

2" DiameterShaker Knob

Shown50% Actual Size

Kaleidoscope Egg KitThe kaleidoscope com-ponents insert into your turned egg. Requires 2" x 2" x 21/2" wood blank, pen mandrel, egg bushings and a 13/16" forstner bit. Our egg stand is perfect for displaying your hand made kaleidoscope. Each 10+ 20+147487 egg kit ............... $11.99 . $10.79 .....$10.147489 egg bushings .................................. $5.50147488 egg stand ........................................ $6.99125932 13/16" Forstner bit ............................ $6.99

Scott Morrison Woodworking DVD’s & TemplatesApproximately 8 years ago master craftsman and furniture builder Scott Morrison took a leap of faith and decided to leave his career in the software business to pursue his lifelong passion and hobby of woodworking. Allow award winning Scott Morrison to guide you through the step-by-step process to create these elegant and contemporary heirloom quality pieces.

Building a Simple Rocking Chair Full size paper templates required.151061 dvd ............................................. $43.99151062 template .................................... $43.99151063 dvd and template set ........................... .............................. Save $5.98 $81.99

Building an Elegant Rocking Chair Template and Chair Making Bits (sold below) required.151058 dvd ..............................................$59.99151059 template .....................................$79.99151060 dvd and template set .......................... ............................ Save $9.98 $129.99

Building a Contemporary Bar StoolTemplate and Chair Making Bits (sold below) required.151064 dvd ............................................. $43.99151065 template .................................... $54.99151066 dvd and template set ........................... .............................. Save $6.98 $91.99

Building a Maloof Inspire Low Back ChairSam called this "his favorite chair" and after sitting in it you will understand why. Template required.152600 dvd ..............................................$49.99152601 template .....................................$49.99152602 dvd and template set ........................... ...............................Save $9.99 $89.99Whiteside Chair Making Bits151098 (A) 5° taper bit 1/2" SH ...............$49.99151099 (B) 5° neg. taper bit 1/2" SH ......$49.99151100 (C) straight cut 1/2" SH ...............$37.99

A B C

Chrome Bottle Stopper KitSolid chrome stoppers with slicon rubber “O” rings seal the bottle and, unlike traditional cork stoppers, do transfer taste and smell to other bottles. Requires 6mm bit and mandrel listed below. The Starter Set is a great value – it includes 4 kits, mandrel and bit.144631 starter set ...................................$32.99822942 bottle stopper kit (1) .................... $6.50822945 mandrel ........................................ $5.99146615 6mm brad point bit ...................... $3.99


Adjustable Stopper KitThis fully adjustable, food safe stopper expands from 5/8" to 13/16" ″to provide a perfect, air tight seal. Constructed from food safe silicone and stainless steel for years of use. Each 10+ 20+149768 bottle stopper kit ...$7.50 ... $6.75 .. $6.00149769 (A) mandrel ............$7.99

AWood Sold Separately

Black TitaniumStopper Kit Black Titanium enhances the appearance of your stoppers and increases durability since it is less susceptible to pitting or flaking. Each 5+148874 ...................................... $9.99 ......$8.99149766 repl. bottle stopper O-rings (10) ............. .......................................$7.99


Tear Drop Bottle Stopper Kit This new tear drop shape sits lower in the bottle’s mouth and features a fluted black silicone seal. Heavy chrome plating resists corrosion. Each 10+ 20+149242 ......................... $4.99 ..... $4.49..... $4.24

CStainless Steel Bottle StoppersDesigned to last a lifetime! Our 300 series stainless steel bottle stopper may be a little more expensive than the traditional chrome, but are well worth the extra expense. These stoppers are not plated, but are 100% solid stainless steel so in addition to being corrosion resistant they will not flake or pit. Stainless Steel Stopper measures 31/8" length.150868 (A) stainless steel stopper ........ $11.99822945 mandrel ........................................ $5.50146615 6mm brad point bit ...................... $3.99149766 repl. bottle stopper O-rings (10) ...$7.99

Stainless Steel Cone Stopper measures 25/8" length x 59/64" top diameter with a 3/8" – 16 tpi threaded stud.150767 (B) cone bottle stopper ............. $11.99149769 adj. bottle stopper mandrel .........$7.99

Stainless Steel Mini Cone Stopper comes in 2" length x 47/64" top diameter with a 3/8" – 16 tpi threaded stud.150968 (C) mini cone stopper ...................$7.50149769 adj. bottle stopper mandrel .........$7.99

AB

Bottle Pouring Spout With Cork Seal KitNow your spirits can be unique with this cork seal bottle stopper and pour spout kit. For 11/2" x 11/2" x 13/4" blank of your choice.150548 ........................................................ $4.99

Pen Kits


Choose Your Kit, Check Our Chart!After you've picked out the kits you want to make, check out our reference chart on page 145. It's an easy way to find out what blanks, bushings and other accessories you'll need to complete your small turning project!

Woodcraft�Pen�&�Pencil�KitsChoose the plating finish from our selection of high quality, wear resistant finishes which accents the wood or acrylic color of your pen.Standard�Gold. Extra heavy 24k gold plating for a long lasting, clean appearance.Cobalt�Gold.�Cobalt Palladium is added to the plating pro-cess to increase the durability of the gold plating.Woodcraft�Gold, A high-tech titanium gold plating process, which has a Rockwell hardness of approximately 85, provides an extremely hard, durable base for our heavy 24k gold plating.Satin. A beautiful matte finish for a unique new look. This long wearing finish is available in gold, nickel, and pearl.Black�Titanium. Black Titanium seems to change colors when moved under light – from black to smokey gray to silver.Platinum. Other kit manufacturers use rhodium, but we chose the true platinum for its rich luster, wear and corrosion resistance.

European�Style�Pen,�Pencil�And�Opener�KitsChoose between standard Gold Cap or Black Cap style. Black Cap kits feature a double ringed center ring and stylized ball tip clip.

European Style Gold Cap Pen. (made with charcoal Dymondwood)European�Style�Pen�Kit�

Utilizes the same single twist mechanism and 7mm boring process as our regular pen kits.Standard�Gold Each 10+ 20+06S45 gold cap pen kit ......................... $5.50 .............. $4.95 ............ $4.67124962 black cap pen kit ...................... $5.50 ............. $4.95 ............ $4.67Woodcraft�Gold Each 10+ 20+128260 gold cap pen kit ....................... $11.50 ............$10.35� ............$9.77128262 black cap pen kit ..................... $11.50 ............$10.35� ............$9.77Other�Finishes Each 10+ 20+141659 satin nickel pen kit .................... $5.50� ..............$4.95�........... $4.67141658 satin gold pen kit ....................... $5.50� ..............$4.95�........... $4.67141660 satin pearl pen kit...................... $5.50� ..............$4.95�........... $4.67145652 black titanium pen kit .............$10.99�............... $9.89�........... $9.34147072 platinum pen kit ......................... $6.99�............... $6.29 ............$5.94839366 copper ......................................... $4.99�............... $4.49�...........$4.24

European Style Black Cap Pencil. European�Style�Pencil�KitUse this .5 mm pencil, fashioned after our European style pen and letter opener kits, to create your own customized executive desk sets. Features a premium German pencil mechanism.Standard�Gold Each 10+ 20+123480 gold cap pencil kit ................... $12.99 ...........$11.69�.......... $11.04124969 black cap pencil kit ................. $12.99� ...........$11.69�.......... $11.04

European Style Gold Cap Letter Opener. (made with charcoal Dymondwood)European�Style�Letter�Opener

Opener has a heavy 31/2" blade, and an overall length of 65/8". Black or Gold Cap styles..Standard�Gold Each 10+ 20+06U90 gold cap letter opener kit.........$6.99 ................$6.29 .............$5.94125268 black cap letter opener kit ......$6.99 ................$6.29 .............$5.94147073 platinum letter opener kit .......$8.50�................$7.65�..............$7.22

Roller�Clip�European�Style�Pen�KitThis classic style clip is similar to those developed by the Boston Pen Company around the turn of the century. Kits feature the same high quality components of our regular European style pens, but with a roller clip. Standard�Gold Each 10+ 20+126454�� roller clip pen kit .......................$4.99� .............$4.49 ..........$4.24

American Slim Style Solid Clip Pen. Matching Pencil Available. (made with redheart)

American Slim Style Black Stripe Clip Pencil. Matching Pen Available. (made with redheart)

American�Slim�Style�Solid�Clip�&�Black�Stripe�Pens�And�PencilsFeature a classic ball tip clip and unique stylized center rings. Black Stripe clip kits have a black filled center ring, Solid Clip kits have a gold “engraved” look center ring. These kits have the same specifications and utilize the same high quality mechanisms as our regular pen and pencil kits. Cobalt Gold finish. Each 10+ 20+124644 solid clip pen kit .........................$5.25� ...............$4.72 ..........$4.46124637 black stripe clip pen kit ............$5.25 ...............$4.72 ..........$4.46124658 solid clip pencil kit .....................$6.50 ..............$5.85 ...........$5.52124651 black stripe pencil kit .................$6.50 ..............$5.85 ...........$5.52

Woodworker’sArtist’s�Pencil�KitEqually at home in the shop or an artist’s sketch kit. The extra thick (5.66mm, about 29/64" D x 31/8"L) HB round lead resists breaking and is held firmly in place by a four jaw collet at the bottom of the pencil mechanism. Just push on the spring loaded top of the pencil and the collet opens to advance or retract the lead. The top, when unscrewed from the pencil, features an internal sharpener to renew the point. Standard gold finish. Each 10+ 20+146767� pencil kit .................................. $13.50 ............. $12.15 ........... $11.47146769 4B soft lead (2) .......................... $1.50146770 HB hard lead (2) ........................ $1.50147263 colored lead assortment ...........$4.99

Save Big With Our Quantity Discounts!Buy 10 of the same kit - Save 10%!Buy 20 of the same kit - Save 15%!Buy 50 of the same kit - Save 20%!Buy 100 of the same kit - Save 25%!

Atlas�Ball�Point�Pen�KitUnique and stylish, this easy to make pen kit uses a single tube design that really shows off your best blanks. The knurled top twists to extend and retract the premium “Parker-style” refill. Length is approximately 51/2". Each 10+ 20+149246 copper .........................................$6.99�................ $6.29�...........$5.34147203 standard gold ............................ $5.50�................ $4.95�........... $4.67147204 black enamel ............................. $5.50�................ $4.95�........... $4.67147205 platinum ..................................... $7.99�.................$7.19 ............$6.79149180 black titanium ............................$9.99�................$8.99 ............$8.49

Atlas Ball Point Pen with Standard Gold finish.

Coffee�Scoop�KitThis easy to turn and assemble kit is perfect kit for beginning turners. Each scoop is one ta-blespoon. Shown as assembled.150294� Woodcraft gold ....... $9.99150295� stainless steel ........ $9.99150296 bushings ................. $4.99

Shown as finished kits,Wood Sold Separately

Ice�Cream�Brass�Scoop�KitCreate custom turned handles for your own one of a kind ice cream scoop! Kit includes (1) solid brass scoop and (1) ferrule along with complete instruc-tions for handle turning and assembly.844334 ................................. $10.99

Perfume�Applicator�PenAttractive and compact, this applica-tor allows perfume to be carried and applied anywhere. The applicator is easy to fill and holds 2-3cc’s of your favorite perfume. Cobalt Gold finish. Uses 1/2" x 1/2" x 5" blanks and requires a 5/16" bit, mandrel, and perfume pen bushings. Each 10+ 20+123115 ..... $3.99 ...$3.59 ...$3.39

Perfume / Aftershave Atomizer. (made with madrone burl)

Perfume�&�Aftershave�Atomizer�KitKit includes glass vial atomizer, plastic syringe refill tool, caps, fittings and instructions. Standard�Gold Each 10+ 20+06S33 .....$6.99 .......$6.29 ...$5.94

Pen Kits


Click Ball Point Pen Matching Pencil Available. (made with brown stabilized wood burl)Click�Ball�Point�Pen�And�Pencil

The time tested push button ballpoint pen is probably in more pockets than any other style pen. Now you can turn your own beautiful wooden ballpoint pens and matching pencils to replace those ugly plastic ones. Easily turned with straight sides, or can be profiled to create custom looks. Standard Gold finish. Each 10+ 20+127671� click pen kit ....................................$4.50 ...........$4.05 ............$3.82128960 click pencil kit .................................$4.99� ...........$4.49 ...........$4.24

Platinum�Finish Each 10+ 20+147074 platinum straight clip pen kit.......$4.99 ............$4.49 .......... $4.24147075 platinum straight clip pencil kit ...$5.99 ............$5.39 ........... $5.09

Pen Kit, Platinum Finish, Straight Clip. (made with cocobolo)

Wall�Street�Pen�And�Pencil�Kits�If you appreciate the sleek, smooth lines and ease of turning and assembly the Wall St. Pen or Pencil Kits are the answer. Simply turn the body, press in the top finial/clip assembly, screw the ink refill mechanism on the nib assembly, push the two halves together and the pen is finished.

Retro�Pen�Kits�Styled after traditional pens from the golden age of writing instruments. Create a pen with classic, timeless elegance that never goes out of style. Features a double twist mechanism operated by turning the styled top cap. Overall finished length approx. 55/8". Each 10+ 20+148715 gold ..................................................$5.99............$5.39 ...........$5.09148716 chrome ...........................................$5.99�...........$5.39 ...........$5.09148717 retro pen bushings .........................$3.99�

Slim�Style�Pen�&�Pencil�Kits�Pen�Kits utilize a premium locking “S-groove” twist action. Pencil�Kits feature newly engineered tips that are free acting and smooth, eliminating the troublesome mechanism “hang-ups”. This fool proof, non-jamming tip is specially designed to feed the correct amount of .5mm lead with each click of the plunger top.Cobalt�Gold Each 10+ 20+123052 solid clip pen kit .............................$3.50 ...........$3.15 ............$2.97123080 solid clip pencil kit .........................$5.50 ...........$4.95 ...........$4.67123059 black stripe clip pen kit .................$3.50 ...........$3.15 ............$2.97123087 black stripe clip pencil kit .............$4.99 ...........$4.49 .......... $4.24

Woodcraft�Gold Each 10+ 20+123320 solid clip pen kit ..........................$10.99� ............$9.89� ........... $9.34123330 solid clip pencil kit ..................... $11.99� ......... $10.79� ......... $10.19123325 black stripe clip pen ...................$10.99 ...........$9.89� ........... $9.34123335 black stripe clip pencil kit ......... $11.99 ......... $10.79� ......... $10.19

Black�Titanium Each 10+ 20+822947 solid clip pen kit ............................ $7.99� .............$7.19 ..............$6.79

Copper Each 10+ 20+148778 solid clip pen kit ............................$4.99� ............ $4.49 ...........$4.24

Satin�Finish Each 10+ 20+142506 nickel deco spring clip pen kit ......$5.50� ...........$4.95�............ $4.67142505 gold deco spring clip pen kit .........$5.50 ...........$4.95�............ $4.67142507 pearl deco spring clip pen kit ........$5.50� ...........$4.95�............ $4.67141656 nickel straight clip pen kit .............$4.25� ...........$3.82� ............$3.61142415 nickel straight clip pencil kit..........$6.99� ...........$6.29 ............$5.94141655 gold straight clip pen kit ................$3.99� ...........$3.59� ............$3.39142416 gold straight clip pencil kit ............$5.99� ...........$5.39 ............$5.09141657 pearl straight clip pen kit ...............$4.25� ...........$3.82� ............$3.61142414 pearl straight clip pencil kit ...........$6.99 ...........$6.29 ...........$5.94

Pencil Kit, Black Stripe Clip. Matching Pen Available. (made with stabilized wood burl)

Pen Kit, Solid Clip. Matching Pencil Available. (made with stabilized wood burl)

Pen Kit, Satin Finish, Deco Spring Clip. (made with bocote)

Pen Kit, Satin Finish, Straight Clip. (made with bocote)

Elegant�Wall�Street�II�Kits�� Each� 10+�� 20+149278 (D) black titanium with gold ....... $18.99�.............$17.09�...... $16.14149279� (E)�black titanium with platinum $18.99�.............$17.09�...... $16.14

D E

Wall�Street�II�Pen�Kits�-�Satin/Chrome�&�Chrome/Satin Each 10+ 20+149573 (F) chrome w/satin chrome ........... $8.99�...............$8.09 ........ $7.64149574 (G) satin chrome w/chrome .......... $8.99�.............. �$8.09 ........ $7.64

F G



Wall�Street�II�“Click”�PenFeatures a new non-rotating click mechanism for smooth and consistent operation. The nib/nib holder, center ring and the click mechanism/clip are pre-assembled. Simply turn the one tube body, press in the threaded ring for the nib assembly, press in the click mechanism/clip assembly, screw on the nib assembly and the pen is finished! Available in HRD-20® long wearing gold and true Platinum finishes. Requires Wall Street II bushings (146597). Each 10+ 20+148461� (H) gold ........................................... $8.99�.............. $8.09�......... $7.64148462� platinum .......................................$13.99�............$12.59�......$11.89149178 black titanium ..............................$18.99 ............ $17.09�...... $16.14149243� copper ............................................ $8.99 ..............$8.09�......... $7.64150546� black chrome ............................... $9.99�.............. $8.99�.........$8.49�146597� Wall St.II bushings ......................... $3.99

H

Elegant�Wall�Street�II�Click�Pen�Kits��Each� 10+�� 20+150864 black titanium/gold .....................$24.99 ............$22.49�...... $21.24150865 black titanium/platinum .............$19.99 ............ $17.99�...... $16.99


Each 10+ 20+146595� standard gold ................................ $6.99 ..............$6.29�.........$5.94146596 (A) Woodcraft gold ......................$14.99 ............$13.49�.......$12.74147459 (B) black titanium w/gold ...........$16.99 ........... $15.29�...... $14.44147460 (C) black titanium w/plat. ...........$16.99 ........... $15.29�...... $14.44148777� copper ............................................ $6.99 ..............$6.29�.........$5.94�148764� chrome two tone ........................... $9.99 ..............$8.99�.........$8.49834131� chrome ........................................... $6.99 ..............$6.29�.........$5.94149244� black titanium ............................$16.99�............$15.29�...... $14.44150547� black chrome .............................$11.99�............ $10.79�...... $10.19

C

A

B

Wall�Street�II�Pen�KitsSamples Shown As Finished Kits

Wall�St.�II�Pencil�KitsMatch the finish with your favorite Wall St. II pen and make stunning pen and pencil sets that everyone will admire. Each 10+ 20+149354 (I) gold ............................................ $9.99�..............$8.99�.........$8.49149355 (J) black titanium ........................$22.99�.......... �$20.69�.......$19.54149356 (K) copper ....................................$11.99�............$10.79�.......$10.19

I

JK


Wall�Street�II�Letter�Opener�KitIf you appreciate the sleek, smooth lines and ease of turning and assembly of the Wall St. II Pen and Pencil kits now you can turn a pen and a letter opener all from one 51/2" blank.150549 Woodcraft gold ...........................................................................$10.99150550 chrome ........................................................................................$10.99

Pen Kits


Wall�St.�III�Pen�KitWith a finished body diameter of just over 1/2", the Wall St. III fits larger hands perfectly. Each 10+ 20+148106�gold�...................................................$7.99�..............$7.19 .........$6.79

Cartridge�Bullet�Pen�KitsThis is the perfect pen for the outdoorsman or hunting enthusiast. The kit looks like a real 30 caliber shell right down to the copper plated nib. This unique kit features a double twist mechanism for ease of use, and is complemented by the Parker style ball point pen refill.150486 chrome ........................................................................................$10.99150487 Woodcraft gold ...........................................................................$10.99150488 bushings .......................................................................................$4.99150489 repl. brass tubes (5) .....................................................................$2.99

Shown as finished kits,Wood sold separately

Wall�Street�II�Pen�Inlay�KitsDesigned with the beginner to intermediate turner in mind, we have assembled several fun and decorative inlay kits that can be enjoyed and turned by anyone. Simply assemble the pieces, glue the brass tube, turn to the desired profile, and complete it with a finish of your choice. 151103 (A) praying hands inlay .............................................................$19.99151104 (B) cross inlay (colors will vary) ................................................$19.99151105 (C) harlequin inlay (colors will vary) ......................................... $21.99151106 (D) rose inlay............................................................................. $21.99151107 (E) bald eagle inlay brown ....................................................... $21.99151108 (F) bald eagle inlay blue .......................................................... $21.99151109 (G) templar cross inlay ..............................................................$19.99151110 (H) koi fish inlay .........................................................................$19.99151111 (I) caduceus inlay ..................................................................... $21.99151112 (J) flame inlay .............................................................................$19.99

AB

CD

EF

GH

IJ

Hart�Double�-Twist�Pen�KitThis pen is a perfect “in between” size. Smaller than the Classic American Style pens, but larger than the Slim Style pens. This easy-to-turn kit does not require any parting or tenons for the center ring. Double-twist mechanism turns left or right to extend the ball point, turn to center to retract. Each 10+ 20+145229 gold ................................................ $5.99��............. $5.39 ........$5.09828438 chrome ........................................... $5.99��............. $5.39 ........$5.09

Wall�Street�IIICircuit�Board�Pen�KitsIf you are a “computer whiz” or know someone who is, then this is the pen kit for you. These unique kits feature a real circuit board that is completely encapsulated in clear acrylic with the brass tube already glued into place. That’s right, no blank cutting, drilling or gluing required. Simply square the end of the preassembled acrylic blank, mount of your mandrel with the bushings and start turning! Use Wall Street III bushings (#147478). Includes Wall Street III pen kit. Choose gold or chrome plating.Green149591 (A) chrome ................................................................................. $19.99149592 gold ............................................................................................ $19.99Orange149996 (B) chrome ................................................................................ $19.99149997 gold ............................................................................................ $19.99Blue150642 (C) gold ....................................................................................... $19.99150643 chrome ....................................................................................... $19.99White150964 (D) gold ....................................................................................... $19.99150963 chrome ....................................................................................... $19.99

Shown As Finished Kits.

Classic�American�Style�Ballpoint�Twist�Pen�And�Pencil�KitsWhen complete, this pen features a larger 3/8" diameter lower body and 1/2" diameter upper body. Double-twist mechanism turns left or right to extend the ball point, turn to center position to retract. Pencil features a smooth operating twist mechanism feeds .7mm lead as you need it. Each 10+ 20+123360� Woodcraft gold ballpoint kit .......$11.50� .......... $10.35� .........$9.77123858� Woodcraft gold pencil kit ............$12.99 ..........$11.69 .......$11.04123108� cobalt gold ballpoint kit ..................$7.99 .............$7.19� ........ $6.79123850� cobalt gold pencil kit .....................$8.50 .............$7.65� .........$7.22142409 satin nickel ballpoint kit .................$7.99� .............$7.19 ........ $6.79149913� chrome/satin chr. ballpoint .......... $9.99�..............$8.99�..........$8.49142410 satin gold ballpoint kit ................... $6.99� ............ $6.29 ........$5.94142408 satin pearl ballpoint kit ................. $6.99� ............ $6.29 ........$5.94144869 black titanium ballpoint kit .........$11.99� ...........$10.79 .......$10.19147076 platinim ballpoint kit....................$10.99� ............ $9.89 ......... $9.34148780 copper ballpoint kit........................ $6.99�..............$6.29 ........$5.94148718 chrome ballpoint kit ...................... $6.50�..............$5.85�......... $5.52

Classic American Style Screw Cap Rollerball Pen. (made with cocobolo)

Fountain tip

Classic American Style Screw Cap Pen with Titanium finish. (made with rosewood)

Classic�American�Style�Screw�Cap�Fountain�And�Rollerball�PensAt last, Classic American style pens with a cap that screws on and off! These kits use threaded, press-fit components, so your cap “screws on” to protect the pen mechanism when not in use. Now these classically styled pens can be made even more eye-catching with the addition of spider web filigrees.Cobalt�Gold� Each 10+ 20+126670� screw-cap fountain kit ...............$9.50 ..............$8.55 ..............$8.07126665� screw-cap rollerball kit ..............$9.50� .............$8.55 ..............$8.07

Woodcraft�Gold Each 10+ 20+126680 screw-cap fountain kit ............ $16.99 ........... $15.29 ........... $14.44126675� screw-cap rollerball kit ........... $15.99� ........... $14.39� .......... $13.59

Black�Titanium�Finish Each 10+ 20+144935 screw-cap rollerball kit .......... $16.99� ........... $15.29 ...........$14.44

Standard�Gold�Spider�Web�Filigree Each 10+ 20+129956� screw-cap rollerball kit ........... $14.99� ........... $13.49� ...........$12.74

TOGETHER, WE CAN CREATE ANYTHINGTM



Pen Kits


Ultra�Cigar�Pens�Ultra pens have distinctive, elegant designs in the nib, center, and finial rings that carry over onto the robust clip and finial top. Available with gold contrasted by chrome or the opposite. Each 10+ 20+148460 gold w/chrome. .........................$12.99�.............$11.69�......... $11.04148459 chrome w/gold .........................$12.99�.............$11.69�......... $11.04149248 satin chrome ............................$12.99 ............ $11.69�......... $11.04147161 cigar pen bushings .................... $3.99149127 10mm pen makers bit ............... $5.99

140

Premier�Cigar�Pen,�Pencil�&�Letter�OpenerUnique black and gold accent banding, combined with the heavy “flat” clip, form a pen which is truly like no other. The Cigar�Pen uses single twist mechanism, overall length is 51/2", top diameter 5/8". Standard Gold finish.�Cigar�Pencil�has all the features of the Cigar pen, uses a premium German pencil mechanism. Cigar�Letter�Opener�utilizes a different bushing than the pen and pencil kits. Each 10+ 20+147155 cigar pen kit, std. gold .............$6.99 ................$6.29 ...........$5.94148749 cigar pen kit, blk. titanium ......$9.99 ................$8.99 ...........$8.49�828439 cigar pen kit, chrome ..............$6.99 ................$6.29 ...........$5.94147156 cigar pen kit, platinum ......... $11.50 ..............$10.35 ............$9.77147157 cigar pen kit, bright black .......$6.99 ................$6.29 ...........$5.94148779 cigar pen kit, copper................$6.99 ................$6.29 ...........$5.94150866 cigar pen kit, satin silver ......... $7.99 ................ $7.19 ........... $6.79�150867 cigar pen kit, satin nickel ........ $7.99 ................ $7.19 ........... $6.79147158 cigar pencil kit, std. gold ...... $14.99 ..............$13.49 ......... $12.74144870 cigar letter opener, gold ..........$5.99 ................$5.39 ...........$5.09

Cigar Pen. Matching Pencil Available. (made with claro walnut)

Cigar Letter Opener Kit. (made with cocobolo)

Navigator�Screw-Cap�Pen�KitsLight reflecting from the six-faceted nib holder gives the look of changing shades of gold tones. Featuring a custom spring pocket clip, tapered finial with black inlay, and single thin black line center ring. � Each 10+ 20+148851 chrome ........................................$9.99�................$8.99�............$8.49146018 cobalt gold ............................... $10.50�................ $9.45�............$8.92149177 black titanium ..........................$18.99 .............$17.09�.......... $16.14149871 platinum ...................................$18.99 .............$17.09�.......... $16.14149909 satin nickel ...............................$12.99 ............$11.69�.......... $11.04149910 sterling silver fountain ............$19.99 .............$17.99�.......... $16.99149911 black titanium fountain...........$29.99 ............$26.99�.......... $25.49

EStars�&�Stripes�Flag�Inlay�KitsShow your colors with this head-turning unique patriotic pen kit! Box elder and maple blanks are stabilized and dyed brilliant red and blue, then precision laser-cut. To finish the pen, assemble the individual stars and stripes into the precut blank, glue, trim, then turn, sand and finish. This is an intermediate to advanced level kit, but certainly within reach of most woodworkers by following the step-by-step instructions included with each kit. Inlay kits do not include pen kits, sold separately. 149728� (A) stars/stripes inlay kit for Navigator/Sedona pen ............. $39.99149729� (B)�stars/stripes inlay kit for Wall Street II pen ...................... $39.99149730 (C) stars/stripes inlay kit for Ultra Cigar/Cigar kits ................ $39.99149731� (D)�stars/stripes inlay kit for European pen ........................... $39.99149732� (E) stars/stripes inlay kit for ................................................................. Churchill Cambridge/El Grande pen ....................................... $39.99

Pen�Kits�For�Stars�&�Stripes�Inlay�Kits148851 Navigator Pen Kit Chrome ...........................................................$9.99149278 Elegant Wall Street II Black Titanium w/Gold ..........................$18.99148460 Ultra Cigar Pen Kit Gold w/Chrome ..........................................$12.9906S45 European Style Pen Kit Gold Cap ...............................................$5.50148463 Cambridge Deluxe Pen Kit ....................................................... $26.99

A

C DB

Hybrid�Cigar�PenThis classic but elegant design features exquisite high-end plating's that are sure to please the most demanding of pen turners. The Hybrid pen utilizes a double twist mechanism for ease of use, and is complemented by the Parker style ball point pen refill. Each 10+ 20+149767 titanium w/platinum ...............$12.99�............ $11.69�........... $11.04152607 black titanium w/gold .............$15.99 ............$14.39 ...........$12.79

Sedona�Screw-Cap�Rollerball�Pen�KitsThe rounded ends, gracefully flared clip and unique center band combine for a striking appearance. The six-faceted nib gives the look of changing shades as light reflects from the angled surfaces. Overall closed length approx. 51/8".�� Each 10+ 20+148852�gold ...............................................$11.99�............ $10.79 ......$10.19148853�chrome ..........................................$11.99�............ $10.79 ......$10.19149245 copper ...........................................$14.99 ............$13.49�......$12.74149912 satin copper .................................$14.99 ............$13.49�......$12.74



El�Grande�Rollerball�&�Fountain�Pen�KitsThese large rollerball and fountain kits have a beautiful yet simple bold new look. Their size and styling shows off fancy woods much better than smaller pens. Because they use larger tubes than other big-bodied pens they are much lighter and better balanced. Easy to make straight tubes with no parting.� Each 10+ 20+144632� roller ball kit, std. gold�..............$9.99 ............... $8.99 ............$8.49822948� roller ball kit, chrome�................$9.99 ............... $8.99 ............$8.49144633 fountain pen kit, std. gold ...... $10.99 ............... $9.89 ............ $9.34�149179 black titanium ......................... $16.99 .............$15.29�.......... $14.44

Shown as finished kits,Pen Kits Sold Separately

Puzzle�Inlay�KitsVarious exotic species are precision laser-cut to form a 3 dimensional “puzzle”. Assemble the individually numbered puzzle pieces around your pen tube, glue, trim, then turn, sand and finish. Intermediate to advanced level project but within reach of most any woodworker by following the step-by-step instructions included. Pen kits sold separately, see pages 138 – 141. 149733� for Navigator/Sedona ....... pen kits .................. $44.99149734� for Wall Street II/Sierra .... pen kits .................. $39.99149735� for Cigar/Ultra Cigar ......... pen kits .................. $44.99149736 for Churchill/Cambridge/ .. El Grande kits ........ $44.99

A

C

B

Color�Puzzle�Inlay�KitsDyed And Stabilized Maple Blanks Are Precision Laser-Cut To Form A 3-Dimensional “Puzzle”.150540� (A) Wall St II/Sierra $41.99150541� (B) Cigar/Ultra Cigar........... ............................... $46.99150542� (C) Navigator/Sedona ........ ............................... $46.99

Pen Kits Sold Separately


Pen Kits


Cambridge�Deluxe�Pen�KitsThe intricate gold patterns feature a dark background with hand-buffed, raised designs on the nib ring, center ring, clip center and finial top. The gold is subtly accented by the surrounding sterling silver components. Furnished with a quality rollerball refill. Each 10+ 20+148463��....................................................... $26.99�............ $24.29�...... $22.94149942� SS/WC gold rollerball�.................. $29.99�............ $26.99�...... $25.49�149943�WC gold/SS rollerball�.................. $29.99�............ $26.99�...... $25.49�149944� SS/WC gold fountain�...................$33.50�............ $30.15�.......$28.47149945� WC gold/SS fountain�...................$33.50�............ $30.15�.......$28.47�144635�bushing set�..................................... $6.99

Tropical�Island�Series�Pen�KitsCreate pens with astounding visual appeal with these Tropical Island Series Pen Kits. Made of genuine, hand-applied mother-of-pearl, abalone shell, and coconut shell, you’ll never have 2 pens that look the same. Turn and finish as you would other acrylic pen blanks. Kits include all pen components and pre-drilled blanks with brass tubes installed. Kits require their respective Tropical Island bushings listed below.Wall�Street�III,�Tropical�Island�Pen�Kits Each 10+ 20+147474 (A) white mother-of-pearl ............$21.99 ............$19.79 ...... $18.69147475 (B) abalone ...................................$21.99 ............$19.79 ...... $18.69147476 (C) brown coconut ........................$21.99 ............$19.79 ...... $18.69147477 (D) white coconut .........................$21.99 ............$19.79 ...... $18.69147478 wall street III bushing set .............. $5.99

Navigator,�Tropical�Island�Pen�Kits�(not shown)147479 white mother-of-pearl ..................$29.99 ............$26.99 ...... $25.49147480 abalone .........................................$29.99 ............$26.99 ...... $25.49147481 brown coconut .............................$29.99 ............$26.99 ...... $25.49147482 white coconut ...............................$29.99 ............$26.99 ...... $25.49147483 navigator bushing set ................... $6.50

A

B

C

D

ChurchillPen�Kits A new larger-sized kit with a highly styled clip, black rounded ends and center ring with gold highlights. This classic design is sure to please any one who appreciates a finely designed pen. Standard gold finish. Each 10+ 20+146766� �.......................................................$15.99............. $14.39�...... $13.59144635�bushing set�.....................................$6.99



K

F

J QB

Laminated�Pen�BlanksYou have to see them to believe them! These colorful patterns—reminiscent of basketweaves, herringbones, and checkerboards—reveal surprising geometric shapes when turned. The craftsmanship is remarkable. Select domestic and exotic woods are chosen for dramatic effect and laid into intricate geometric patterns, then each joint is precision machined and glued under pressure to form extremely tight joints. Because each 3/4" x 3/4" x 5" pen blank may contain up to 100 separate pieces of wood, you’ll need patience and sharp tools for best results when turning your unique project. Each 3+149444�� (A) Blank #15 ............ $11.99 .... $10.79149445�� (B) Blank #18 ............ $11.99 .... $10.79149446�� (C) Blank #20 ........... $11.99 .... $10.79149447�� (D) Blank #28............ $11.99 .... $10.79

Each 3+149448� (E) Blank #31 ............ $11.99 .... $10.79149449�� (F) Blank #34............ $11.99 .... $10.79149450�� (G) Blank #35............ $11.99 .... $10.79149451�� (H) Blank #36 ............ $11.99 .... $10.79149452�� (I) Blank #37 ............ $11.99 .... $10.79149453�� (J) Blank #39 ............ $11.99�.... $10.79149454�� (K) Blank #41 ............ $11.99 .... $10.79149455�� (L) Blank #45 ........... $11.99 .... $10.79149456��(M) Blank #48 ........... $11.99 .... $10.79149457�� (N) Blank #49............ $11.99 .... $10.79149458�� (O) Blank #50 ........... $11.99 .... $10.79149459�� (P) Blank #53............ $11.99 .... $10.79149460�� (Q) Blank #54 ........... $11.99 .... $10.79149461� (R) Blank #64 ........... $11.99 .... $10.79149462�� (S) Blank #110 ......... $11.99 .... $10.79149463�� (T) Blank #111.......... $11.99 .... $10.79

A�Woodcraft�Exclusive�Product!

D

I

T

P

L

G

S

C

M

A

E

H O

N

R

Poly�Resin�Pen�BlanksWhat makes these so unique is the process in which they are created. Painstakingly constructed layer by layer and placed under high heat and pressure they are able to create these detailed and intricate patterns. Pen blank size is 3/4" x 3/4" x 5". For the ultimate finish we recommend wet sanding with Micro-Mesh kit #145982.

150832 (A)�candy cane ............................... $5.99150833 (B)�limeade .................................... $5.99150834� (C)�champagne .............................. $5.99150835 (D)�lavender twist .......................... $5.99150836 (E)�mochachino ............................. $5.99150837 (F)�snowflake blue ......................... $5.99150838 (G)�birthday sprinkles .................... $5.99150839 (H)�confetti ..................................... $5.99

Shown as finished kits,Pen Kit Sold Separately

A B C D E F G H

Tru-Stone�Pliable�Pen�BlanksThese unique, Tru-Stone Pliable pen blanks are made from approximately 85% natural stone ore that is pigmented and combined with a gem resin specially formulated for the pen turning industry. It allows for higher heat tolerances so the blank is less susceptible to fractures or breakage when using standard woodturning tools. Sharp tools are a must, but when turned and polished the natural stone appearance is stunning. Available in 3/4" x 3/4" x 51/2" pen blanks, or 11/2" x 11/2" x 13/4" bottle stopper blanks. Pen�Blanks�3/4" x 3/4" x 51/2"�150568 persian turquoise .......................$11.75150569 bloody basin jasper ....................$11.75150570 white turquoise ...........................$11.75150571 yellow dino bone .........................$11.75150572 azurite / malachite natural ........$11.75150573 banded malachite ......................$11.75150574 asian pink coral ..........................$11.75150575 dark lapis .....................................$11.75150576 charoite .......................................$11.75150577 sugi w/black ................................$11.75150578 wild horse jasper ........................$11.75150579 white w/gold matrix ....................$15.79150580 turquoise w/gold matrix .............$15.79150581 red w/gold matrix ........................$15.79150582 black w/gold matrix ....................$15.79

Bottle�Stoppers�11/2" x 11/2" x 13/4"150583 persian turquoise .......................$13.75150584 dark lapis .....................................$13.75150588 wild horse jasper ........................$13.75150585 white w/gold matrix ....................$16.99150586 red w/gold matrix ........................$16.99150587 black w/gold matrix ....................$16.99




Pen Kits


148169 Super Hero

148170� Blue Agate

148171 Lemon Lime

148172 Opal

148173 Sea Green

148174 Tiger

148177 Orange Ripple

148178 Pomegranate

148183 Blue Lagoon

148184 Rippling Water

148186 Burgundy

148187 Classic Gold

148216 Venetian Red

148217 Cobalt

148218 Kelly Green

148220 Orchid

148221 Fire & Ice

148223 Snow

148224 Pink Flamingo

148225 Eggplant

148227 Rage Red

148228 Violet

148235 Cloud I

148237 Tuscan Sun

148238 Persian Blue

148239 Rain Forest

148240 Wisteria

148241 Purple Haze

148242 Lemon

148243 Cloud II

148246 Dragon

148247 Caribbean BLue

148249 Banana Split

148253 Sea Foam

148254 Fire

Our wide range acrylic pen blanks offer the pen maker an unmatched selection of vibrant colors and patterns. Acrylic blanks take a beautiful polish that gives the appearance of a liquid tube, no top coat finish is necessary. 3/4" x 3/4" x 5" blanks turn and drill easily. We recommend using Micro-Mesh sandpaper for the ultimate polished finish.

Acrylic�Pen�Blanks

148316� Strawberry Cream

148317 Magenta Bliss

148319� Summer

148322 Rainbow

148325 Sky

148190 Onyx II

148191 Smoke Rings

148193 Tye Dye

148194 Scarlet Mesh

148195 Lava

148196 Pitch Black

148197 Copper Haze

148201 Gecko

148202 Turquoise

148203� Fern Green

148205 Blue Illusion

148207 Milky Way

148208 Dalmation

148209 Purple Rain

148210 Cowhide

148212 Kryptonite

148213 Gold Metal

148214 Storm

148215 Shamrock

148257 Water

148258 Lavender

148260 Abalone

148261 Orange Cream

148262 Valentine’s Red

148263 Key Lime

148265 Gator Alley

148267 Azurite

148270 Groovy

148276 Vermillon

148284 Ruby

148285 Royal Blue

148293 Cookies ‘N’ Cream

148299 Watermelon

Each 5+ 10+Acrylic�Blanks ...........................................................$4.99 .......$4.50 .....$3.99145982�micro-mesh sanding kit ........................ $14.99

150823 Golden Rod NEW!

150824� Grape Fury NEW!

150825 Grasshopper NEW!

150826 Mercury NEW!

150827 Scout NEW!

150828 Desert Camo NEW!

150829 Jungle Camo NEW!

150830 Desert Sunset NEW!

150831 Calming Water NEW!

149147 Lightning

148264 Gold Dust II

Pen Kits


Maple�Single�Pen�CaseOpen the lid of this beautiful Maple hardwood box to reveal your works of art. This case was de-signed to accommodate large bodied pens like the Cambridge and the Churchill. Case measures 19/16"W x 1"H x 615/16"L.149875 ........................................................ $6.99

143

Lift�Pen�BoxOpen the lid of this hardwood box and your pen magically levitates up! This simple but effective trick makes this an eye catching display for your hand made pens. 11/8" W x 11/4" H x 61/4" L, these rosewood cases will hold any standard pen. For large body types, like the Cigar pen, choose the large lift box. Each 10+145366 standard ....................$6.99 ......... $6.29146067 large ........................... $7.99 ......... $7.19

GCB

DA

Each 10+ 20+123951� black ............. $4.99 ..... $4.50...... $4.05123953� gray ............... $4.99 ..... $4.50...... $4.05

Lacquered�Hardwood�Cases(E)�Walnut06R24 single ............. $4.99 ..... $4.50...... $4.0506R25 double ........... $5.50 ..... $4.95...... $4.45(F)�Oak 06R26 single ............. $4.99 ..... $4.50...... $4.0506R27 double ........... $5.50 ..... $4.95...... $4.45�(G)�Maple06R95 single ............. $4.99 ..... $4.50...... $4.0506R96 double ........... $5.50 ..... $4.95...... $4.45(H)�Rosewood 06R93 single ............. $5.50 ..... $4.95...... $4.4506R94 double ........... $5.50 ..... $4.95...... $4.45(I)�Black�Plastic�Case. Velvet upper and lower liners with a interior retainer sash.06R98 .......................$1.99 .....$1.80......$1.55

Pen�And�Pencil�CasesAdd value and show off the beauty of your work. Display, sell, or present your hand-crafted pens and pencils in these handsome cases.

Velvet� and� Leatherette� Presentation� Cases. All models feature interiors with a retainer sash to keep your pen or pencil securely in place. Holds up to 2 pens and/or pencils. Each 10+ 20+ (A)�Black�velvet, gold trim w/red velvet interior.125833�� ................$2.99 ..........$2.69 ........ $2.40(B)� Black� leatherette, gold trim w/black velvet interior.124804�� ...............$3.99 ..........$3.60 ........ $3.25(C)�Blue�velvet, gold trim w/blue velvet interior.124806�� ...............$2.99� .........$2.69.........$2.40(D)� Pen� Sleeves. Imitation velvet pen sleeves. Sleeves are 53/4" long x 1" wide and hold one pen or pencil of any style. Sold in packages of 10.123949� red ..........$4.99 ..........$4.50 ........ $4.05

E FH I

Wood�Pen�Blank�AssortmentsWe ’ v e a s s e m b l e d two assortments of domestic and exotic pen and pencil blanks (3/4" x 3/4" x 5"). Each species is labeled for reference. See our Wood Selection for Pen Blanks in bags of 10. Note: Sub-stitutions may occur if a species is out of stock.

Assortment� “A” contains 2 each of Zebrawood, Padauk, Bloodwood, Ash, Anigre, Bolivian Rosewood, Aromatic Cedar, Bubinga, Redheart, Bird’s Eye Maple, Purpleheart, Honduras Rosewood, Cocobolo, Sapele, Granadillo, and Olivewood.50Y40� .................................................... �$43.99

Assortment� “B” contains 2 each of Cherry, Curly Maple, Canarywood, Teak, Macassar Ebony, Quilted Maple, Lacewood, Yellowheart, Mahogany, Tulipwood, Brazilian Cherry, Bocote, Claro Walnut, Wenge, Kwila, and Lyptus.125390 ..................................................... $44.99126048 grab bag 5 lbs. (mixed) ..............$19.99

Diagonal�Cut�Pen�Blank�AssortmentPremium exotic species are selected for color and prominent grain and then processed by cutting on an angle to accentuate the grain patterns. You’ll see intricate design emerge as these are turned – swirls, chevrons, arches and stripes. Assorted pack of four includes 1 each: Bocote, Bolivian Rosewood, Marblewood and Wenge. Sharp tools will produce best results! 3/4" x 3/4" x 5". Turned pieces demonstrate diagonal grain efffect.149535�4 pcs. . .......................................... $11.99

Turned tubes to show grain,are not available

Novelty�Clips�For�Slim�Style�Pens�Let you personalize gift pens or create pens for sale to target groups. Each 10+ 25+149304� cross clip, chrome ................................... .........................$1.99 ......$1.79�.... $1.69149305 cross clip, gold ......................................... (A) ....................$1.99 ......$1.79 ....$1.69149309 golf club clip, chrome .............................. .........................$1.99 ......$1.79 ....$1.69149310 golf club clip, gold .................................... (B) ....................$1.99 ......$1.79 ....$1.69149311 rifle clip, chrome ...................................... .........................$1.99 ......$1.79 ....$1.69149312 rifle clip, gold ............................................ (C) ....................$1.99 ......$1.79 ....$1.69149319� medical clip, chrome ............................... (D) ...................$1.99 ......$1.79 ....$1.69149320 medical clip, gold .................................... (E ) .................. $1.99 ......$1.79 ....$1.69

AB

CD E

Foldable�Paper�Pen�CaseThis foldable pen case offers a unique way to not only protect your pens, but also wrap pens being given as a gift. Choose a single or double cases. 4 per package. Measures 6"L x 113/16"W x 5/8"H.149877 single .......................... $4.99149878 double ........................ $4.99

Paper�Pen�CaseGift wrap your pens quickly and easily. Slide open, place your pen in the tray and slide the cover on. Display the clip of your pen through the cut out. Measures 71/8"L x 111/16"W x 7/8"H. Packs of 4. 149876 ................................. $4.99

Leatherette�Pen�CasesThese are durable, soft-sided protective cases. The single pouch has a tuck-in flap and measures 6" x 11/4", while the double pen case zips closed and measures 61/2" x 21/2" x 1" thick. Each 10+ 20+147269 single pouch $3.99�....... $3.60 ... $3.25147268 double case $4.99�....... $4.50 ... $4.05

Pen�Display�Case�With�LidDisplay case holds up to 32 larger diameter pens. Black simulated leather outer shell, with grey felt interior and brass latches. Measures 14"L x 71/2"W x 2"H. Pens not included.149898 ......................................................$29.99

www.woodcraft.com

Pen Kits


Micro-Mesh�Pen�Sanding�KitThe super-fine grit of Micro-Mesh pa-pers will give all your pen blanks that “wet look” fin-ish. Foam backed ultra fine grit 2" x 2" 2-sided pads put a polished sheen on bare wood and a handsome luster on finish coatings. Abrasive crystals last up to 15 times longer than normal abrasives. Kit includes one each of 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000, and 12,000 grit pads. 145982 ......................................................$14.99

144

WoodRiver®

Pen�Maker’s�Drill�Bits�These HSS precision ground bits start cleanly and limit exit hole chip out. Featuring deep smooth flutes for superior chip extraction and extra sharp lands and flutes that provide precision sized holes with fewer lost blanks. Bits with shanks 31/64" and 11mm or larger have shanks reduced to 7/16".149131� 5/16" ...............................$3.99�149124 6mm ..............................$2.99149132� 11/32" ..............................$4.99�149125 7mm ..............................$4.99149133� 3/8" .................................$4.99�149126� 9mm ..............................$5.99149136 25/64" ..............................$6.99�149127� 10mm ...........................$5.99149134� 13/32" ..............................$6.99151257� 10.5mm ........................$6.99149128 11mm ............................$7.99149137� 27/64" ...............................$7.99151258� 12.5mm ........................$8.99�149129 14mm ........................... $9.99149130 15mm ........................... $9.99�149135� 15/32" ...............................$7.99149138� 31/64" ..............................$8.99�149139� 33/64" ..............................$8.99149140� letter “O” .......................$5.99

Pen�Maker’s�Bit�Set�contains the bits required to make the most popular kits. Contains one each 7mm, 10mm, 11mm, 27/64", 3/8", and letter “O” bits.149141 Save Over 20%! ...........................$29.99

Pen�Mill�SetEvery thing you need to square the ends of most popular pen kit blanks and tubes! The interchange-able pilot shafts remove excess glue from inside the tubes and guide the 3/4" diameter cutter to square the blank ends exactly to the tubes for perfect fitting parts when you assemble your pens. Set contains 3/4" diameter cutter, 7mm, 8mm, 3/8" and 10mm pilot shafts, bushing sleeve for pencil kits, hex wrench and storage case. Wall Street II sold separately.146139 complete pen mill set .................$35.99149593 wall street II pen mill ..................$16.99149594 repl. shaft wall street II ................. $6.99

Pen�Kit�Disassembly�ToolsNow you can easily repair pen kits or recover dam-aged pens. Match the millimeter of the size pen boring you need to disassemble. Includes detailed instructions for use. Does not work on pencil kits.125755 7mm boring .................................$14.99125756 10mm boring ...............................$14.99

Pen�Maker's�Center�Drilling�ViseOne of the most dif-ficult parts of pen-making is the center-ing of the bit on the pen blank, and keeping it firmly in place while the hole is drilled. This vise simplifies the pro-cedure, because the vise centers ride on a knob-controlled set of two heavy threaded bolts and two smaller rods. The knob adjustment makes original set up and changes very easy. Simply clamp the pen blank, set up under the drill bit and clamp the base. The center you now have will work for every subsequent pen blank, no matter what its size is, up to 11/2" square. The aluminum vise parts are on a heavy plastic base, which is drilled through on first use. This vise helps reduce waste from off-center pen blank drilling.143609 ......................................................$49.99

Round�Pen�TubeThis 7/8" diameter clear plastic round case will showcase your handcrafted pens in a manner that provides excellent visibility but affords total protec-tion. Packed 10 cases per package. 147485 .........................................................$7.99

Acrylic�Pen�Buffing�SystemFinally, a system that will polish your pen blanks to perfection! Designed by Master Pen Maker Barry Gross, this quick and easy two step buffing system will produce a completely scratch free finish on your acrylic blanks or CA finished blanks. Simply charge the cotton wheel with the specially formulated blue rouge, polish the pen blank for a few seconds then finish by buffing the blank on the flannel wheel for that ultimate “wet look” finish. Systems includes: #2MT for easy mounting to a #2MT headstock, 8mm mandrel, plastic bushings, one 4” cotton wheel, one 4” flannel wheel, and buffing compound.151117 acrylic pen buffing system..........$42.95151118 replacement flannel 4” wheel ...... $8.95151119 replacement cotton 4” wheel ...... $8.95151120 blue buffing rouge ......................... $8.95

Turning Acrylic Material With Barry Gross DVDNo longer will you be intimidated by acrylics! Master Pen Maker Barry Gross demonstrates all of his tricks of the trade as he reveals the fun of turning acrylics. Follow Barry through the steps required to create an elegant, cigar-style ball point pen from an acrylic blank. Included are techniques on sharpening, proper tool handling, drilling and finishing. Approximately 118 minutes.151116 ......................................................$22.95

Burl�Wood�Pen�Blank�AssortmentPremium exotic burl wood species have been selected and cut for maximum color and grain patterns. The assortment pack of four includes 1 each of the following: Afzelia Burl (Xylia xylocapa), Amboyna Burl (Ptercarpus indicus), Gmelia Burl (Gmelia arborea), Kelat Burl (Eugenia spp.). Blanks measure 3/4" x 3/4" x 5". Sharp tools will produce the best results!151009� ......................................................$24.99

Amboyna Burl Afzelia Burl

Gmelia BurlKelat Burl

Colt�5�Star�Pen�Maker's�BitsAre you fed up with the problems created by conven-tional wood bits? No more! Enter the Colt 5 Star Pen Maker’s Bit. Made by one of Germany’s finest drill bit manufac-tures from M2 HSS these bits feature a patented design that allows for straight and accurate bores. The 25° Twinland Parabolic Flute and 4 pt cutting tip bores up to six times faster and removes debris more effectively than conventional bits. Bit shanks 27/64®" and 11mm or larger have shanks reduced to 25/64". 149821 6mm ............................................... $9.99149822 7mm ............................................... $9.99149823� 9mm .............................................$15.49149824 10mm ...........................................$15.99149825 11mm ........................................... $21.99149826 14mm ........................................... $27.49149827� 15mm ...........................................$38.99149828 5/16" ..............................................$13.49149829 11/32" .............................................$15.49149830 ®®3/8" ................................................$15.99149831� 25/64" .............................................$18.99149832� 13/32" .............................................$19.49149833� 27/64" .............................................$22.99149834 15/32" .............................................$26.49149835 31/64" ............................................. $27.49149836� 33/64" ............................................. $27.99149837 letter “O” ......................................$13.49

Pen�Maker’s�Bit�SetContains the bits required to make the most popular kits - 7mm, 10mm, 27/64®",®® 3/8", and “O”.149838 (shown) ........................................$70.99

Wood


Pen And Pencil Makers MandrelOur economical mandrel system provides the base for turning precision pens, pencils, keychains, etc. To use, simply place the proper bushings and your blanks on the shaft and secure with the knurled brass mandrel nut. When turning projects such as keychains, which do not require the full length of the mandrel shaft, just slide the provided stop onto the mandrel until the needed length is exposed, and tighten the stop! Includes Morse Taper, shaft, knurled brass shaft nut and compression stop nut.141468 #1 MT mandrel ...........................$12.99141469 #2 MT mandrel ...........................$12.99141502 repl. mandrel shaft ......................$2.99141503 repl. compression stop nut ......... $1.99141063 repl. knurled brass nut ................ $1.75

Professional Pen Turning MandrelA totally new concept, our mandrels feature a collet that ensures that the shaft is always exactly centered on your lathe. Because the collet body is hollow, the amount of mandrel shaft extending from the collet can be varied for turning everything from key chains to larger pens. The locking nut and collet work like the collet in your router, just loosen the nut and slide the shaft in or out to the length you need, then tighten. The small end of the collet body features a 5/16" thread that allows you to pass a bolt through your headstock and, with the mandrel shaft removed, the collet assembly can be used as a 1/4" collet chuck! Includes 1/4" collet, collet nut, and mandrel shaft with brass knurled nut.145998 (A) #1 Morse taper .....................$22.99145997 (B) #2 Morse taper .....................$24.6906R0A replacement shaft/nut ................ $4.99

A

B

Pen Kits

Bushing Sets06R03 slim style pen ............................... $4.9906R04 perfume atomizer ......................... $4.9906R07 classic American pen/pencil ........ $6.9906S61 perfume atomizer ......................... $5.9906S62 European style pen .......................$7.9906S89 classic American fount./roll. ball $5.99123485 European style pencil ................... $7.99124858 cigar letter opener ........................ $9.99125689 mini European style .......................$7.99127767 click ball point .............................. $6.99144635 el grande/cambridge/churchill .....$7.49144640 tooth pick holder key ring ............. $6.50144642 detachable key ring ...................... $6.39145233 hart double twist ........................... $4.99146600 American click ballpoint ............... $6.50146019 navigator screw cap pen .............. $6.39146597 wall street II ................................... $3.99146768 woodworker's/artist pencil ........... $5.99147161 premier cigar pen, pencil, ultra .... $4.29147206 atlas ball point pen ....................... $4.99147478 wall st. III/tropical island .............. $5.99147483 navigator/tropical island .............. $6.50148717 retro pen ........................................ $4.29128452 european pen ................................ $8.50129482 multi tool pen ................................ $6.99

sets vary by style


Pen Kit Reference ChartPen Kit Reference Chart Kit Page Hole Size Pen Bit Bushing Access./Replacement Parts Ink Refill

American Ball Point Twist Pen 140 O 149140 06R07 Repl. Tube Set (5 pr.) - 06S28 149892, 150644American Click Ball Point Pen 140 O , 11mm 149140 149128 146600 Repl. Tube Set (5 pr.) - 149763 149892, 150644American Letter Opener 140 O 149140 06R07 Repl. Tube Set (5)-123960American Magnifying Glass 140 O 149140 06R07 Repl. Tube Set (5)-123960American Pencil 140 O 149140 06R07 Repl. Tube Set (5 pr.) - 123866Am. Screw Cap Fountain Pen 140 3/8" 149133 06S89 Repl. Tube Set (5 pr.) - 06S88Am. Screw Cap Rollerball Pen 140 3/8" 149133 06S89 Repl. Tube Set (5 pr.) - 06S88 149893American Slim Pen 138 7mm 149125 06R03 Repl. Tube Set (5 pr.) - 06R68 06S75, 06S76, 06S77American Slim Pencil 138 7mm 149125 06R03 Repl. Tube Set (5 pr.) - 06R78 Atlas Ball Point Pen 138 3/8" 123207 147206 Repl. Tube Set (5) - 147743 149892, 150644Bottle Stopper 137 6mm 149124 N/A Repl. O-rings - 10 pcs. - 149766Cambridge Deluxe Pen 139 31/64", 33/64" 149138 149139 144635 Repl. Tube Set (5 pr.) - 145047 149893Churchill Rollerball Pen 139 31/64", 33/64" 149138 149139 144635 Repl. Tube Set (5 pr.) - 145047 149893Cigar Letter Opener 140 10mm 149127 124858 Repl. Tube Set (5) - 145048Cigar/Ultra Cigar Pen/Bowtie 140 10mm 149127 147161 Repl. Tube Set (5 pr.) - 147568 149892, 150644Cigar Pencil 140 10mm 149127 147161 Repl. Tube Set (5 pr.) - 147568Click Ball Point Pen 139 O 149140 127767 Repl. Tube Set (5pr.) - 06S28 149892, 150644Click Pencil 139 O 149140 127767 Repl. Tube Set (5pr.) - 06S28Detachable Key Ring 137 7mm 149125 144642 Repl. Tube Set (5) - 126525El Grande Fountain Pen 140 31/64", 33/64" 149138 149139 144635 Repl. Tube Set (5 pr.) - 145047 El Grande Rollerball Pen 140 31/64", 33/64" 149138 149139 144635 Repl. Tube Set (5 pr.) - 145047 149893European Letter Opener 138 7mm 149125 06S62 Repl. Tube Set (5) - 124732 European Pen 138 7mm 149125 06S62 Repl. Tube Set (5 pr.) - 06S53 06S75, 06S76, 06S77European Pencil 138 11/32" 149132 123485 Repl. Tube Set (5 pr.) - 123917 European Roller Clip Pen 138 7mm 149125 06S62 Repl. Tube Set (5 pr.) - 06S53 149892, 150644Hart Double Twist Pen 139 O 149140 145233 Repl. Tube Set (5 pr.) - 149160 149892Kaleidoscope Egg Kit 137 13/16" 125932 147489 N/AMiniature Hanging Ornaments 137 7mm 149125 06R03 N/A Navigator Screw Cap Pen 140 25/64", 15/32" 149136 149135 146019 Repl. Tube Set (5 pr.) - 147952 149893Navigator/Tropical Island 141 N/A N/A 147483 N/A 149893Necklace Magnifying Glass 137 7mm 149125 06R03 Repl. Tube Set (5) - 149762Perfume Atomizer 138 15mm 149130 06S61 Repl. Tube Set (5 pr.) - 06S64Perfume Applicator Pen 138 5/16" 149131 06R04 Repl. Tube Set (5 pr.) - 149764Retro Pen Kits 139 9mm 149126 148717 Repl. Tube Set (5 pr.) - 149282 149892, 150644Teacher's Pen Kit 7mm 149892 06R03 Repl. Tube Set (5 pr.) - 149925 149850Toni Twist 7mm 149822 145228 N/A 06S75, 06S76, 06S77Toothpick Holder Key Ring 137 11mm 149128 144640 Repl. Tube Set (5) - 149765Sedona Screw Cap Rollerball 143 25/64", 15/32" 149136 149135 146019 Repl. Tube Set (5 pr.) - 147952 149893Slim Style Pen 139 7mm 149125 06R03 Repl. Tube Set (5 pr.) - 06R68 06S75, 06S76, 06S77Slim Style Pencil 139 7mm 149125 06R03 Repl. Tube Set (5 pr.) - 06R78Wall Street II Click Pen 139 27/64" 149137 146597 Repl. Tube Set (5) - 149280 149892, 150644Wall Street II Pen 139 27/64" 149137 146597 Repl. Tube Set (5) - 147120 149892, 150644Wall Street II Pencil 139 27/64" 149137 146597 Repl. Tube Set (5 pr.) - 150290 Wall St III Tropical Isl/Circuit Bd Pen 141 N/A N/A 147478 N/A 149892, 150644Wall Street III 139 27/64" 149137 147478 Repl. Tube Set (5 pr.) - 147120 149892, 150644Woodworker's/Artist's Pencil 138 15/32" 149135 146768 Repl. Tube Set (5 pr.) - 149725 146769, 146770, 147263

Wood


WoodRiver®

Deluxe Self-Centering Pen & Bottle Stopper Drilling Vise The unique design of this vise assures the jaws clamp firmly and quickly, while remaining parallel to each other and square to your drill press table. No more off center holes in your pen blanks! A comfortable T-handled grip handle and a fully adjustable heavy duty toggle clamp ensure easy, secure clamping. The vise jaws have vertical “V” slots so both round and square blanks are held firmly under the drill bit for perfect, repeatable drilling. Just clamp a pen or bottle stopper blank in the vise, center under the drill bit and clamp the vise base to the drill press table. The vise will remain centered on every subsequent pen blank up to 11/2" square, (23/16" diagonal).151256 ......................................................$79.99

146

Finnish Birch PlywoodThis 100% Finnish birch multi-ply plywood is light-weight, yet has superior strength and durability characteristics which make it useful for a variety of woodworking applications. The “front” face is classified as paint grade, slight variation in color is acceptable, but no patches are allowed. The “rear” face and inner plies may contain patches. Both faces are sanded smooth. Exterior glue is used so this plywood can even be used for outdoor projects (with an appropriate outdoor finish). 5/32" has 3 plies, 1/4" has 5 plies, 3/8" has 7, the 1/2" has 9 and the 3/4" has 14 plies. Grain runs with largest dimension, overall size may vary ±1/8". T x W x L Per Sheet 6+ Sheets124878 5/32" x 12" x 30".........$13.99 .....$12.59124879 5/32" x 24" x 30" ........$19.99 ..... $17.9950Y01 1/4" x 12" x 30" ..........$15.49 .....$13.4950Y02 1/4" x 24" x 30" ..........$22.99 ......$20.6950Y03 3/8" x 12" x 30" ..........$20.99 ..... $18.8950Y04 3/8" x 24" x 30" ..........$34.99 ......$31.4950Y05 1/2" x 12" x 30" ..........$18.99 ...... $17.0950Y06 1/2" x 24" x 30" ..........$33.99 ......$30.59124881 3/4" x 12" x 30" ..........$27.25 ......$24.52124882 3/4" x 24" x 30" ......... $48.99......$44.09

Micro-Thin Birch Plywood has cabinet grade faces on both sides (no patches or plugs). Made with water resistant glue for protected exterior use. Aircraft quality for the most demanding projects. T x W x L Per Sheet 6+ Sheets50W18 1/16" x 6" x 12" .............. $8.99 ........$8.0950W22 1/16" x 12" x 24" .......... $19.99 ...... $17.9950W19 1/8" x 6" x 12" .................$9.99 ........$8.9950W23 1/8" x 12" x 24" ........... $24.99 ......$22.49

Phenolic Faced MultiPlyThis manufactured material is fantastic for shop-built auxiliary tables, fences, jigs and fixtures. It is dimensionally stable and has protective surfaces that will stand up to the harsh wear and tear of your woodworking shop. Phenolic Faced MultiPly can be machined with standard woodworking tools and holds screws well. Sheets are 24" x 48", ±1/4", with face grain running with the longest dimension.131171 1/2" x 24" x 48" .............................$48.99131170 3/4" x 24" x 48" .............................$59.99

TITEBOND Cold Press Glue For VeneerTitebond Cold Press glue is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formu-lated for cold press lam-inating of wood to solid woods, particleboard, MDF, plywood and other porous materials. It offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and non-backed wood veneers. Set time is usually 15 minutes at room temperature, allow 24 hours full cure.145718 quart.............................................$10.50825575 gallon ...........................................$24.99

Pen PressNo more fumbling with awkward clamps or vises, this is the quick and hassle free way to assemble pen kits. This easy to use press adjusts to any length pen kit, press individual blanks and, with a turn of the locking knob, adjust the press for pens up to 7" long. All metal construction allows you to effortlessly press parts with up to 300 pounds of pressure. Can be used free standing or clamped to a bench.142731 ......................................................$49.99

Premium Inlay BandingsT h e s e p r e m i u m i n l a y b a n d i n g s a r e chosen by the demanding professionals to add a distinctive touch to furniture, boxes, and restoration pieces. Quality construction aids installation and reduces time in the finish room. Installation is easy: Simply rout a groove to the proper width and depth with a straight cut router bit and glue the banding in place. Made in the USA from domestic and exotic woods, in your choice of widths from 1/8" to 1/2" wide, 36" long, approximately 1/28" (0.035)" thickness.149601 #001, 2 pcs., 1/8" ........... A ........... $5.50149602 #002, 2 pcs., 1/8" ........... B ........... $5.50149603 #003, 2 pcs., 1/8" ........... C ............$7.99149604 #004, 2 pcs., 1/8" ........... D .........$14.50149605 #005, 2 pcs., 3/16″" ......... E .........$15.50149606 #006, 2 pcs., 3/16″" ..........F..........$18.99149607 #007, 2 pcs., 3/16″" ......... G ........... $8.99

149608 #008, 2 pcs., 3/16″" ......... ″H ......... $17.50149609 #009, 2 pcs., 3/16″" .......... ″I ..........$18.50149610 #010, 2 pcs., 3/16″" ..........J ............ $8.99149611 #011, 2 pcs., 1/4"″ ........... K ......... $17.50149612 #012, 2 pcs., 1/4"″ ............L ...........$17.50149613 #013, 2 pcs., 1/4" ...........M ..........$17.50149614 #014, 2 pcs., 1/4" ........... N .........$20.99149615 #015, 2 pcs., 1/4″" ........... O .........$22.99149616 #016, 2 pcs., 1/4" ........... ″P ......... $17.50149617 #017, 2 pcs., 1/4" ........... Q .........$24.50149618 #018, 2 pcs., 1/4″" ........... R ......... $17.50149619 #019, 2 pcs., 5/16"″ ......... S .........$12.50149620 #020, 2 pcs., 5/16″" ..........T ..........$20.50149621 #021, 2 pcs., 5/16" ......... U ........ ″$21.99149622 #022, 2 pcs., 5/16″" ......... V ........ $21.50149623 #023, 2 pcs., 3/8″" ..........W ........ $21.99149624 #024, 2 pcs., 3/8" .......... X..........$19.50149625 #025, 2 pcs., 3/8″" ...........Y..........$19.50

149626 #026, 2 pcs., 3/8" .......... Z..........$24.99149627 #027, 2 pcs., 1/2″" .......... AA ........$19.99149628 #028 2 pcs , 1/2" .......... BB ........$24.99149629 #029 2 pcs., 1/2" .......... CC ........$19.99

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

AA

ACTUAL SIZE

BB

CC

Wood


SAUERS Large Veneer PacksTwelve square foot packs of solid wood veneer for larger projects. Packs are comprised of sequence matched veneers 481/2" in length and 41/2" to 61/2" in width. All pieces of veneer in a pack will be the same width. Grain runs lengthwise.131450 birch .............................................$18.99147932 cedar, spanish ............................. $19.99131440 cherry ...........................................$15.99842660 hickory/pecan .............................$18.49131444 lacewood .....................................$33.99131443 mahogany ....................................$15.99131446 maple ...........................................$15.99838388 maple, ambrosia .........................$20.99147931 maple, birdseye ............................$74.99131447 maple, figured ............................. $27.99131445 oak, flaky......................................$15.99131442 oak, red ........................................$15.99131448 oak, white ....................................$15.99131449 pine ..............................................$16.99131441 walnut ..........................................$16.99

SAUERS Craftsman Veneer PacksHigh quality real wood veneers from around the world. Each pack contains 3 square feet of unbacked veneer that ranges from 41/2" to 61/2" in width by 12" in length. All packs are sequence matched (cut in sequence from the same piece of wood). You may have more than one sequence in a pack, but rarely more than two.131379 anegre .............................................$9.50131377 ash, burl ........................................$18.99131389 beech ...............................................$6.99131392 bubinga ...........................................$9.99131393 cedar ................................................$9.99147930 cedar, spanish ................................$8.99131381 ebony ............................................ $26.99131436 elm ................................................ $35.99131380 lacewood .........................................$8.99147928 lyptus, figured ...............................$18.99131536 mahogany .........................................$7.99131376 mahogany, crotch ........................ $21.99147929 makore ..........................................$12.99

131511 mappa burl .................................... $17.99131375 maple, birdseye ............................ $17.99131378 maple, burl ................................... $24.99131384 maple, figured ...............................$10.99131512 maple, quilted ..............................$18.99131439 movingui ....................................... $11.99131388 myrtle, burl .................................... $17.99131438 oak, flaky ..........................................$7.99131435 pearwood ......................................$13.99131390 purpleheart ...................................$10.99131510 redwood, burl ............................... $24.99131386 rosewood .......................................$16.99131383 sapele ..............................................$8.99131385 teak ................................................$12.99131535 walnut ...............................................$7.99131387 walnut, burl ................................... $27.99131391 wenge ........................................... $12.99131382 zebrawood .................................... $11.50131537 domestic assortment pack ......... $11.99

Dyed Veneers. Each pack contains 3 square feet of unbacked veneer that ranges in size from 41/2" to 61/2" in width by 12" in length. The Base Color Assortment contains red, green, blue, white, black and yellow, the Wild Color Assortment varies based by package, but generally includes colors like pink, purple, orange, grey, etc.131394 black dyed ....................................$18.99131395 white dyed .....................................$18.99832569 red dyed.........................................$18.99147213 yellow dyed ....................................$18.99131396 base color asst............................. $22.99131397 wild color asst. ............................. $22.99131437 dyed mixed greens asst. ..............$19.99

Veneer Edge Banding IronThe perfect tool for applying heat activated, pre-glued edge banding to veneer-ply case pieces. Include a thermostatic heat control, non-stick coating, specially shaped shoe with rounded edges and metal stand. 51/2' power cord, 110V.144952 ...............................$41.99

sides at once, and in either direction.836877 ................................ $22.99 836876 repl. carb. st. blades $10.99

Quad Pro Edge Band Trimmer with carbide blades lasts up to five times longer than standard blades.836879 ................................ $43.50836878 repl. carb. st. blades $25.99

FastCap Quad Edgeband Trimmer Features a unique pneumatic sys-tem for super smooth action. E x t r a s h a r p c a r b o n s t e e l blades trims both

Hardwood DowelsFinest quality, 36", s t r a i g h t - g r a in e d , smooth sanded for a variety of woodwork-ing, projects. Buy any 10 dowels, mix or match, and you can deduct 10% of their total cost! Buy any 50 and deduct 15%! Note: Minimum order for Dowels is $5.00.Birch Size50D01 1/4" .............................................. ea. $.4050D02 3/8" .............................................. ea. $.6050D03 1/2" .............................................. ea. $.9950D04 3/4" ............................................ea. $2.5050D05 1" ..............................................ea. $4.5050D06 11/4" ..........................................ea. $6.9950D07 11/2" ..........................................ea. $8.99Cherry50B01 1/4" ............................................ ea. $1.9950B02 3/8" ............................................ea. $2.9950B03 1/2" ............................................ea. $3.9950B04 3/4" ............................................ea. $4.9950B05 1" ..............................................ea. $6.99Oak50A01 1/4" .............................................. ea. $.9950A02 3/8" ............................................ea. $1.9950A03 1/2" ............................................ea. $2.9950A04 3/4" ............................................ea. $3.9950A05 1" ..............................................ea. $4.99Walnut50C01 1/4" ............................................ea. $1.9950C02 3/8" ............................................ea. $2.9950C03 1/2" ............................................ea. $3.9950C04 3/4" ............................................ea. $6.5050C05 1" ...............................................ea. $7.99

Buy Any 10

& Save 10%!

Buy Any 50

& Save 15%!

SAUERS Veneer Sheets And EdgingReal wood veneers are ideal for any project including repairing furniture, facing kitchen cabinets, or finishing shelves. Made of the finest select woods, Veneer Sheets are 1/42" thick and backed with 10 mil paper. They should be applied to surfaces using any quality contact cement. Edge Banding is precoated with a heat activated glue for a permanent bond. Just iron it on! Veneers come presanded and ready for finishing. Includes instructions. 7/8" x 25' 7/8" x 50' 2" x 25' 2' x 8' 4' x 8'Species $8.50 $9.50 $14.99 $19.99 $44.99 $49.99 $69.99 $79.99 $89.99 birch, white 147423 147424 147425 cherry 147426 147427 147428 131530 404162 mahogany 147441 147442 147443 131531 404177 maple 147432 147433 147434 131532 404182 oak, red 147435 147436 147437 131533 404192 oak, white 147438 147439 147440 pecan 147430 147431 404137 404173

$10.50 $16.99 $24.99 pecan 147429 walnut 147447 147448 147449 131534 404201

$12.99 $21.99 $29.99 $59.99 $99.99 teak 147444 147445 147446 404138 404199

$69.99 $119.99 oak, flaky 404136 147466

$7.99 $13.99 white melamine 147450 147451 black melamine 147452 147453 almond melamine 147454 147455

Wood


Claro Walnut BurlWe’ve gained access to a supply of beautiful claro walnut burl from orchard walnut trees from the West coast. Claro is created by grafting English walnut (Juglans regia) and Black Walnut (Juglans nigra).The wood is variegated with swirls of orange and red from the English and the dark purple of the Black walnut. Regular claro is treasured for its beauty but the interesting texture and figure of this “Burl” make it a rare and special find. Claro turns well and can be finished to a wonderful deep luster. Air dried to 20% MC.844578 3" x 6" x 6" ...................................$28.99 150940 3" x 8" x 8" ...................................$44.99150941 4" x 6" x 6" ...................................$34.99

148

Thin Stock Hardwood PacksOffered in convenient packs of 2 sq. ft. with random widths (3" to 9"), all with a 24" nominal length. Rough sanded and ready for use.827943 bubinga, 1/8" thick .......................$20.99827932 bubinga, 1/4" thick .......................$23.99827921 bubinga, 1/2" thick .......................$33.99827948 cherry, 1/8" thick ..........................$20.99827937 cherry, 1/4" thick ..........................$23.99827926 cherry, 1/2" thick ..........................$34.99827944 kiaat, 1/8" thick ............................$20.99827933 kiaat, 1/4" thick ............................$23.99827922 kiaat, 1/2" thick ........................... $31.99827941 mahogany, African, 1/8" thick .... $21.99827930 mahogany, African, 1/4" thick .....$24.99827919 mahogany, African, 1/2" thick......$30.99827949 maple, hard 1/8" thick .................$20.99827938 maple, hard, 1/4" thick ................$23.99827927 maple, hard, 1/2" thick ................$34.99827942 padauk, 1/8" thick ....................... $21.99827931 padauk, 1/4" thick ........................$24.99827920 padauk, 1/2" thick ........................$30.99827947 purpleheart, 1/8" thick ................ $21.99827936 purpleheart, 1/4" thick .................$24.99827925 purpleheart, 1/2" thick ................ $34.99827950 walnut, 1/8" thick ........................ $21.99827939 walnut, 1/4" thick .........................$24.99827928 walnut, 1/2" thick .........................$34.99828197 yellowheart, 1/8" thick ................ $21.99828198 yellowheart, 1/4" thick .................$23.99828199 yellowheart, 1/2" thick .................$30.99

Wood Identification KitIncludes fifty 4" x 9" veneer samples, everything from ash to zebrawood. An excellent resource for choosing woods for future projects, testing finishes, or teaching. Includes a listing of species, botanical names and country of origin.15W12 ......................................................$35.99

Figured Asian Satinwood(Lagerstroemia spp.)This beautiful wood has striking curly or fiddlebacked curly grain pattern. The heartwood ranges from creamy white to a light grayish color. It machines well and takes a high polish. South East Asia.131628 3" x 3" x 12" .................................$18.99834374 3" x 6" x 6" ...................................$18.99

Black Mesquite(Prosopis nigra) Black Mesquite is a heavy hardwood that ranges from rich brown to chocolate with purple overtones in color with a grain structure resembling mahogany. Argentina, South America.151142 1.5" x 1.5" x 12" ............................$3.99151143 2" x 2" x 6" .....................................$3.50151167 2" x 2" x 12" ................................... $7.50840340 2" x 5" x 5" .....................................$6.50151144 2" x 6" x 6" .....................................$9.99151168 2" x 8" x 8" ...................................$16.99845855 3" x 3" x 12" .................................$20.99840339 3" x 5" x 5" ...................................$14.99151169 3" x 6" x 6" ...................................$20.99

Black Walnut BlocksThese off-fall blocks from a manufacturing process are kiln dried and ready to use, although not perfect and clear, there’s great usable walnut here! Great for practice turning of bowls or spindles, tool handles, small bandsaw boxes or even re-sawing for small boxes. Size (51/4" x 141/4" x 21/4") is approximate and pieces may contain knots. Limited quantities.150946 ........................................................ $9.99

Bolivian Rosewood(Machaerium scheleroxylon) Commonly known as “Morado”, this wood is deep, dark chocolate brown to purple black in color with occasional strips of even darker grain patterns. This species is hard and heavy with a fine texture with variable tones and when worked, exhibits a smell reminiscent of walnut. Machines well with sharp hand and power tools. Excellent for turning. South America.838477 3/4" x 3/4" x 5″" (5-pcs.) ................... $7.5006A83 1/8" x 3" x 24" .............................. $11.9906A84 1/4" x 3" x 24"................................$13.9906A85 3/8" x 3" x 24" ...............................$16.99131582 3/8" x 11/2" x 5", 2 pcs. . .................. $4.9906A53 3/4" x 3" x 24" ............................... $17.99149642 3/4" x 3" x 36" ...............................$24.99125344 2" x 2" x 24" ..................................$22.99125899 2" x 6" x 6" ................................... $21.99838027 3" x 3" x 12" ..................................$29.99149641 3" x 5" x 5" ....................................$19.99

Hormigo Negro(Platymiscium dimorphandrum)Hormigo Negro has a dense, hard, reddish brown heartwood with dark stripes.This species machines well with sharp tools and polishes to a high gloss. In Central America, Hormigo is known as “woods that sing” and has traditionally been used in the manufacturing of Marimbas.150913 1/8" x 3" x 24" ............................... $11.99150914 1/4" x 3" x 24" ............................... $12.50150915 3/8" x 3" x 24" ...............................$13.50150916 1/2" x 3" x 24" ................................$14.50150917 3/4" x 3" x 24"................................ $17.50149643 11/2" x 11/2" x 12"...........................$4.99149644 2" x 2" x 12" ................................... $7.50149645 2" x 2" x 24" ................................ $12.50149646 3" x 3" x 12" .................................$16.99149647 2" x 6" x 6" .....................................$9.99149648 3" x 6" x 6" ...................................$14.50

Sycamore(Platanus occidentalis)Common along riverbanks in the east, the ghostly white sycamore is an often overlooked hardwood. Sycamore has a whitish to light yellow sapwood with a darker reddish brown heartwood. The quartersawn face exhibits rays with a distinct conspicuous dark “fleck” or “flake” figure due to its interlocked grain.152690 3/4" x 3/4" x 5" (5-pcs.) .................... $6.99150997 1.5" x 1.5" x 12" ............................ $4.50150999 2" x 4" x 4" ..................................... $4.99150998 2" x 2" x 12" .................................... $6.99151000 2" x 6" x 6" ...................................$10.99149863 3" x 3" x 12" .................................$12.49152689 3" x 6" x 6" ...................................$14.99152688 3" x 8" x 8" ...................................$26.99

Wood


Cherry, Brazilian (Hymenaea courbaril) Referred to in the trade as Jatoba, this reddish brown colored wood has a mahogany-like grain, superior hardness, yet ma-chines and turns well. Color deepens with exposure to light. Central and South America.

Please use caution when cutting these or any other woods. Wood dust has been known to cause allergic reactions among some woodworkers. Always use proper respirators, dust extraction equipment and sufficient ventilation when cutting or sanding.

Pen Blanks. Stock listed at 3/4" x 3/4" x 5" is the ideal size for pen and pencil blanks.

Micro-Thin Lumber. This extra-thin stock (1/16" - 1/2") is cut to size from quality, kiln-dried stock, 100% clear and sanded on both sides.

Carving and Turning Blocks. Larger blocks are sawn to ± 1/4" of size listed, smaller blocks ± 1/8". Spindle stock (11/2" - 2") dimensions are ± 1/8". Grain runs with the longest dimension.

Note: Sapwood is not considered a defect by the National Hardwood Lumber Association and may be found in some boards. Sorry, we can’t pick lumber for grain or color match.

Bubinga(Guibourtia spp.) This African species, also known as African Rosewood, is a beautiful dense hardwood with a rose-colored background and darker purple striping. Turns well and takes a high polish. Machines well with sharp tools.

Ash, White(Fraxinus americana) Light brown heartwood with almost all white sapwood. Straight grain with coarse texture. Excellent bending properties and shock resistance. USA.

Mix or Match Any 6 Piecesand Save

10%

Basswood(Tilia americana) Fine straight grain material with an even texture and little contrast between early and late wood. Creamy white in color and lighter in weight than the related European Lime. Fairly soft, preferred wood for carving. Canada and USA.

Bloodwood/Satine(Brosimum paraense) Bloodwood, or “cardinal wood" as it is commonly refered to, is a medium to hard wood with red to crimson color and tight straight interlocking grain. Excellent for turning. South America.

Bocote(Cordia spp.) Spectacular background colors,dark brown to red with multicolored strips that vary from yellow to orange and green to dark brown. Machines well, excellent turning stock. Somewhat hard to find wood from Mexico and Central America.

Cedar, Spanish(Cedrela Odorata) Light reddish brown to dark brown in color with grain texture similar to that of mahogany. Machines and carves well with hand and power tools. Strong yet lightweight. Traditionally used for cigar boxes and humidor linings.

Cedar, Aromatic Red(Juniperus virginiana) Soft wood with aroma that is a natural repellent to moths and insects. Sapwood is white to cream intermixed and contrasts with the salmon to dark red of the heartwood. Expect tight closed knots throughout the material. USA.

Cherry(Prunus serotina) Hard straight grained with firm texture. Heartwood is reddish brown to deep red, with brown flecks, and will naturally darken with age. Works well with hand and machine tools, finishes well. Great for turning. USA.

Ash152937 3/4" x 3/4" x 5" (5-pcs.) ..$2.99130707 3/4" x 3" x 24" ...............$6.99131599 3/4" x 4" x 48" ...............$9.99131544 3/4" x 6" x 36" .............$10.99151286 3" x 3" x 12" ................$12.99

Ash Baseball Bat Blank152795 27/8" dia. x 37" ........... $28.99Basswood145131 1/16" x 3" x 24" .............. $2.75145128 3/32" x 3" x 24" ..............$2.99145132 1/8" x 3" x 24" ...............$3.25145129 3/16" x 3" x 24" ..............$3.50145133 1/4" x 3" x 24" ...............$6.50145134 3/8" x 3" x 24" ...............$4.50145130 1/2" x 3" x 24" ............... $6.75125369 3/4" x 3" x 24" ................$7.99131606 3/4" x 4" x 48" .............$14.99145117 1/4" x 4" x 24" ...............$3.99145118 1/16" x 4" x 24" ..............$3.69125370 3/4" x 6" x 36" .............$10.9950W70 2" x 2" x 12" ...................$7.99125371 2" x 4" x 12" ..................$9.99125372 2" x 6" x 18" ................$16.9950W71 3" x 3" x 12" ..................$9.50131143 3" x 6" x 18" ............... $22.9950W72 4" x 4" x 12" ................ $17.9950W73 4" x 6" x 12" ............... $26.50

50W74 4" x 6" x 18" ...............$33.5050W75 4" x 6" x 24"................$44.9950W77 4" x 8" x 12".................$29.9950W78 4" x 8" x 18"................$44.9950W79 4" x 8" x 24"................$59.99Bloodwood/Satine152952 3/4" x 3/4" x 5" (5-pcs.) .$9.99131026 1/8" x 3" x 24" ............ $10.50131027 1/4" x 3" x 24"............. $11.50131028 3/8" x 3" x 24" .............$10.99131029 1/2" x 3" x 24" ............ $14.9906A58 3/4" x 3" x 24" .............$18.99131607 3/4" x 4" x 48" ............$32.99131547 3/4" x 6" x 36" ............ $29.99152603 11/2" x 11/2" x 12" ..........$3.99130773 2" x 2" x 24" ................$14.99130774 2" x 6" x 6" .................$11.99148516 3" x 6" x 6" ................. $16.99834940 3" x 3" x 12" ............... $16.99Bocote152938 3/4" x 3/4" x 5" (5-pcs.) ..$6.99125362 1/8" x 3" x 24" ............$11.50125363 1/4" x 3" x 24"............. $11.99148714 11/2" x 11/2" x 3" ............$2.50840049 11/2" x 11/2" x 6" ............$4.99124126 11/2" x 11/2" x 12" .........$8.99834565 11/2" x 11/2" x 18" ........$10.99841659 11/2" x 11/2" x 24" .......$12.99834393 2" x 2" x 12" ................$12.99

125364 3/8" x 3" x 24" .............$13.99130791 1/2" x 3" x 24" ..............$16.99124128 3/4" x 3" x 24" ............ $20.99125367 2" x 2" x 24" ............... $20.99125365 2" x 6" x 6" ..................$14.99Bubinga152940 3/4" x 3/4" x 5" (5-pcs.) ..$4.99131202 1/8" x 3" x 24"................$5.99131203 1/4" x 3" x 24" ................ $7.99131204 3/8" x 3" x 24" ............... $7.99131205 1/2" x 3" x 24" ................$8.9906A56 3/4" x 3" x 24" ...............$9.99131608 3/4" x 4" x 48" ............ $24.99131548 3/4" x 6" x 36" .............$21.99131206 2" x 2" x 24" ................$12.99125869 2" x 6" x 6" ..................$13.99838971 2" x 10" x 10" ............. $39.99131207 3" x 6" x 6" ................. $23.99Cedar, Aromatic Red124133 1/4" x 3" x 24".................$7.99130810 1/2" x 3" x 24" ................$8.99131609 3/4" x 4" x 48" ............$21.99131494 3/4" x 6" x 36" .............$13.99Cedar, Spanish124872 3/16" x 4" x 24" ..............$6.50127304 1/4" x 4" x 36" ...............$9.50127309 3/8" x 4" x 36" ...............$9.99131610 3/4" x 4" x 48" ............ $20.99

Cherry152953 3/4" x 3/4" x 5" (5-pcs.) ..$5.9950W11 1/16" x 3" x 24" ..............$5.9950W12 1/8" x 3" x 24"................$6.5050W13 1/4" x 3" x 24"................$8.9950W51 3/8" x 3" x 24"................$9.99130809 1/2" x 3" x 24"..............$10.99131545 3/4" x 6" x 36" ............ $20.50131600 3/4" x 4" x 48" ............ $20.9950W59 2" x 2" x 30" ................$15.5007A16 2" x 6" x 6" ..................$11.5007A36 3" x 6" x 6" ................. $23.99123214 3" x 8" x 8" ................. $26.99 131555 3" x 3" x 12" ............ $16.99 Cherry, Brazilian152939 3/4" x 3/4" x 5" (5-pcs.) ..$5.99130701 1/8" x 3" x 24 " ...............$6.50130702 1/4" x 3" x 24"................$6.50130703 3/8" x 3" x 24" ............... $7.50124118 3/4" x 3" x 24".................$7.99131611 3/4" x 4" x 48" .............$19.99131575 3/4" x 6" x 36" ............ $25.99124121 2" x 2" x 24" ..................$8.99124122 2" x 6" x 6" ....................$8.99124123 2" x 8" x 8" ..................$10.99Cocobolo152941 3/4" x 3/4" x 5" (5-pcs.) ..$5.99838082 11/2" x 11/2" x 12" ........$6.50

Wood


Maple(Acer saccharum) Hard, heavy, straight-grained wood with fine texture. Sapwood is white and selected for its color, heartwood is light reddish brown. Irregular grain can make this wood difficult to work. Turns well, stains fair, finishes well. USA.

Maple, Ambrosia(Acer rubrum) Soft maple with defects from the Ambrosia Beetle. Includes pin holes, streaks of darker color on a white to cream background. Ex-cellent turning stock. Air-dried, but green by lumber standards. Sealed to deter cracking.

Cocobolo(Dalbergia spp.) Hard and heavy wood with irregular grain with a medium fine texture. Heartwood is a varigated color from purple red to yellow, with black markings. The color turns deep orange red with exposure. West Coast Central America.

Black And White Ebony(Diospyros embryopteris) Heartwood is creamy white with distinct black veins. The wood has a fine texture with mostly straight grain. A rare find. The wood takes a high finish and turns well. Southeast Asia and Laos.

Ebony, Macassar(Diospyros celebica) Dark brown to black heartwood with bands of yellow to golden brown. Very hard, dense, and heavy, it can be very brittle at its heart. Used for high-end cabinetry, inlay work, musical instruments, or decorative applications.

Maple, Bird’s Eye(Acer saccharum) A natural occurrence found pre-dominately in hard maple causes “eyes” to form that give a striking figure to the wood. Straight grain with intermittent eyes makes this a great accent wood. USA.

Ebony, Gaboon(Diospyros spp.) Jet black color with only the slightest possibility of dark brown streaks. Great for knobs, pulls, inlays and accents in cabinetry. Somewhat difficult to machine, but worth the reward. Excellent turning wood. Africa.

Maple, Burl, Big Leaf(Acer macrophyllum) Unbelievable, swirly, unpredict-able grain patterns with light to dark variations of cream brown to dark brown color. Natural edges, bark inclusions and internal voids may be present and are not considered defects. Northwest USA.

Maple, Curly(Acer macrophyllum) Unbelievable grain patterns that are curly or fiddlebacked. Color ranges from light cream to golden brown to reddish brown. USA and Canada.

Marblewood(Marmaroxylon racemosum) Marblewood is smooth and straight-grained with a fine, even texture. The heartwood is yellow-beige with maroon to black wavy streaks. Used for cabinet work, inlay, carving and turnings. Brazil

Oak, Red(Quercus rubra) Straight grained with a coarse texture. Color ranges from light cream, pinkish-red to dark tan or golden brown. Machines with hand and power tools. Used for furniture, turning, takes a stain well. USA.

Mora(Morus tinctoria)Mora is a dense, hard, choclate brown wood with spectacular heavily defined striping of dark browns, reddish blacks, or tans and even bluish greys. Machines well with sharp tools.

123741 1" x 1" x 12" ................$12.99123742 11/2" x 11/2" x 12" ........$17.50123743 2" x 2" x 12" .............. $28.99841747 11/2" x 11/2" x 24" ...... $33.99844376 2" x 2" x 24" .............. $49.99838970 3" x 3" x 12" .................$71.50126350 5 lb. grab bag ........... $49.99Ebony, Macassar152943 3/4" x 3/4" x 5" (5-pcs.) $9.99131466 1" x 1" x 12" ...............$11.99131465 11/2" x 11/2" x 12" ....... $22.99131462 2" x 2" x 24" ............... $39.99131463 2" x 6" x 6" ................. $25.99131464 3" x 6" x 6" ................. $42.99148666 3" x 3" x 12" ............... $44.99Maple 152946 3/4" x 3/4" x 5" (5-pcs.) ..$4.5050W01 1/16" x 3" x 24" ..............$6.5050W02 1/8" x 3" x 24"................$6.5050W03 1/4" x 3" x 24"................$6.9950W50 3/8" x 3" x 24" ................$7.50130808 1/2" x 3" x 24" ................$9.50147605 3/4" x 6" x 36" .............$15.50131602 3/4" x 4" x 48" .............$19.99148963 11/4" x 11/4" x 12" ..........$3.99148866 11/2" x 11/2" x 12" ..........$4.9950W62 2" x 2" x 30" ................$10.99131557 3" x 3" x 12" ................$12.99

830568 11/2" x 11/2" x 18" ..........$8.9950X87 1/8" x 3" x 24"..............$16.9950X88 1/4" x 3" x 24".............$19.5050X89 3/8" x 3" x 24" ............ $24.99130792 1/2" x 3" x 24" ............. $26.9906A57 3/4" x 3" x 24" ............ $26.50150885 3/4" x 4" x 48" ............ $49.99150884 3/4" x 6" x 36" ............ $59.99838083 2" x 2" x 6" ....................$5.39131585 2" x 2" x 12" ..................$9.99130798 2" x 2" x 24" ...............$31.50149122 2" X 3" X 6" ............... $9.29838085 2" x 4" x 4" ....................$8.99838086 2" x 5" x 5" ..................$13.99123745 2" x 6" x 6" .................$21.30148543 3" x 3" x 12" ...............$23.99840331 3" x 5" x 5" ..................$19.99131213 3" x 6" x 6" .................$31.99Ebony, Black & White146529 3/4" x 3/4" x 5" (5-pcs.) $19.99146525 1" x 1" x 12" ..................$9.99149924 11/2" x 11/2" x 3" ............$4.50146526 2" x 2" x 12" ............... $30.50146527 2" x 6" x 6" ................ $44.99838501 3" x 3" x 12" ............... $59.99146528 3" x 6" x 6" ................ $65.99Ebony, Gaboon838480 3/4" x 3/4" x 5" (5-pcs.) $11.99 123666 3/4" x 3" x 24" ............. $49.99

Maple, Ambrosia131605 3/4" x 4" x 48" .............$12.50131075 2" x 6" x 6" .....................$7.99131076 2" x 8" x 8" ....................$9.99131009 3" x 6" x 6" ..................$12.99131062 3" x 8" x 8" ..................$19.99131186 4" x 6" x 6" ..................$13.99131061 4" x 8" x 8" ................. $22.99Maple, Bird’s Eye149695 3/4" x 3/4" x 5" (5-pcs.) $12.50127342 1/8" x 5" x 24"..............$10.99127343 1/4" x 5" x 24" ..............$13.50127344 3/8" x 5" x 24"..............$16.50127345 3/4" x 5" x 24" ..............$19.99149843 1" x 4" x 24" ................$19.99 149760 11/2" x 11/2" x 5" ............$3.99Maple, Burl, Big Leaf 131066 2" x 8" x 8" .................$31.99131212 3" x 10" x 10" ..............$72.9950W94 4" x 10" x 10" .............$91.99Maple, Curly152942 3/4" x 3/4" x 5" (5-pcs.)..$6.99131497 1/8" x 5" x 24" ............ $11.99131479 1/4" x 5" x 24" .............$12.99131481 3/8" x 5" x 24" .............$14.99131480 3/4" x 5" x 24" ............ $20.99131560 3/4" x 6" x 36" ............ $28.99151102 2.6" x 2.6" x 12" .........$18.99

Marblewood832096 3/4" x 3/4" x 5" ..............$2.99149231 3/4" x 3" x 24" ............$12.50148733 3/4" x 6" x 36" ............$21.99148732 3/4" x 4" x 48" .............$19.99149230 11/2" x 11/2" x 24" ......$12.99131565 2" x 2" x 12" ..................$9.99131566 2" x 6" x 6" .................. $17.50834930 3" x 3" x 12" ............... $24.99837403 3" x 6" x 6" ................. $24.99Mora840031 11/2" x 11/2" x 12" ........$6.50841797 2" x 2" x 12" ..............$11.99839176 3" x 3" x 12" ..............$22.99840028 3" x 5" x 5" ................$14.50840029 3" x 6" x 6" .................$21.50839177 3" x 8" x 8" .................$39.99Oak, Red50Y32 1/8" x 3" x 24"................$6.5050Y33 1/4" x 3" x 24"................$6.9950Y34 3/8" x 3" x 24" ................$7.50130807 1/2" x 3" x 24" .............$11.99131493 2" x 2" x 30" ..................$8.99131603 3/4" x 4" x 48" .............$12.99131579 3/4" x 6" x 36" .............$13.99Olivewood838487 3/4" x 3/4" x 5" (5-pcs.) .$11.99838041 11/2" x 11/2" x 6" ............. $5.99

Wood


Zebrawood(Microberlinia brazzavillenis) Medium to heavy hardwood with possible coarse to very coarse grain texture depending on how it is cut. Light tan to golden yellow with streaks of dark brown to black. Africa.

Yellowheart(Euxylophora paraensis) Fine straight grained hardwood with bright yellow color throughout the wood. Machines well and is an excellent turning stock. Great for adding accents to projects. Central America.

Walnut, Black(Juglans nigra) Tough wood with even but coarse texture, straight grained with occasional wavy grain patterns. Sapwood is light in color contrasting with the rich dark chocolate brown to purplish black heartwood. Canada and USA.

Padauk(Pterocarpus soyauxii) Medium to hard wood, heart-wood is deep orange red that will age to a deeper orange brown. Moderately coarse grain texture with straight to interlocking grain patterns, machines and turns well. West Africa.

Rosewood, Honduras(Dalbergia stevensonii) Hard, heavy and dense, the heartwood is pinkish to purple brown with irregular black markings. Grain is straight with a medium to fine texture. Sapwood is a striking contrast of creamy white. Central America.

Purpleheart(Peltogyne) Medium to hard wood with tight, fairly straight grain with moderate to coarse texture. Bright purple when cut, darkens to brownish purple with exposure. Machines well with sharp tools. Turns and finishes well. Central and South America.

East Indian Rosewood(Dalbergia latifolia) An excellent turning wood, purple-brown heartwood with beautiful figuring of darker streaks. Grain is commonly interlocked, producing a narrow ribbon figure of quartersawn surfaces. Fairly hard to machine or saw. India.

Wenge(Millettia laurentii) Dark brown in color with very close grain and fine black veins. Fairly straight grained with coarse texture. Works fair with hand and machine tools and is an excellent turning stock. Used for interior or exterior joinery. Africa.

Claro Walnut(Juglans californica)This wood is created by grafting an English walnut (Juglans regia) scion to a native walnut species rootstock, The area near the graft tends to be variegated in color, with beauti-ful marble-like, dark brown and tan swirls in the figure. USA

Olivewood(Olea capensis) Light to medium brown with streaks of black and darker brown. Has a fine texture with a shallow interlocked grain. Glues and polishes well. Excellent for decorative turnings, inlay, and high end custom furniture. Central African Republic.

838042 11/2" x 11/2" x 12" ....... $13 .50827323 2" x 2" x 12" .................$29.99826645 2" x 2" x 6" ...................$14.99830049 3" x 3" x 12" ................$49.99Padauk152947 3/4" x 3/4" x 5" (5-pcs.) ...$7.5050X71 1/8" x 3" x 24" ...............$10.9950X72 1/4" x 3" x 24" .............. $11.9950X73 3/8" x 3" x 24" ...............$14.9906A55 3/4" x 3" x 24" ...............$16.99131612 3/4" x 4" x 48" .............. $21.99131550 3/4" x 6" x 36" ...............$25.5006A94 2" x 2" x 24" .................$12.9907A21 2" x 6" x 6" ...................$12.5007A33 2" x 8" x 8" ...................$13.99841808 3" x 5" x 5" ...................$10.99130978 3" x 6" x 6" .......................$17.99827344 3" x 8" x 8" ...................$32.99828465 3" x 8" x 12" ..................$17.99Purpleheart152948 3/4" x 3/4" x 5" (5-pcs.) ... $7.5050X75 1/8" x 3" x 24" .................$8.9950X76 1/4" x 3" x 24" .............. $11.2550X77 3/8" x 3" x 24" .................$8.99130806 1/2" x 3" x 24" ................. $9.9906A18 3/4" x 3" x 24" ...............$12.29131613 3/4" x 4" x 48" ...............$18.99131551 3/4" x 6" x 36" ...............$19.9906A92 2" x 2" x 24" ................... $9.9907A11 2" x 6" x 6" ......................$7.99

07A23 2" x 8" x 8" ...................$11.99828466 3" x 3" x 12" .................$14.99841814 3" x 5" x 5" ..................... $9.99130977 3" x 6" x 6" ...................$14.99Rosewood, East Indian838479 3/4" x 3/4" x 5" (5-pcs.) .. $6.99131570 3/4" x 3" x 24" ...............$24.99838052 11/2" x 11/2" x 12" ...........$4.50841877 11/2" x 11/2" x 18" ........... $6.99838053 2" x 2" x 12" ...................$8.99841746 2" x 2" x 18" .................$13.99131571 2" x 6" x 6" ...................$14.99131574 2" x 8" x 8" ...................$23.99834932 3" x 3" x 12" ................ $21.50131572 3" x 6" x 6" ...................$18.99131573 4" x 6" x 6" ...................$29.75Rosewood, Honduras838491 3/4" x 3/4" x 5" (5-pcs.) ... $9.9906A87 1/8" x 3" x 24" ...............$14.5006A88 1/4" x 3" x 24" .............. $21.9906A89 3/8" x 3" x 24" .............. $21.99130804 1/2" x 3" x 24" ...............$24.9906A15 3/4" x 3" x 24" ...............$28.99131614 3/4" x 4" x 48" ..............$54.99152793 11/2" x 11/2" x 3" .............$1.99838072 11/2" x 11/2" x 6" .............$3.50838073 11/2" x 11/2" x 12" ............$6.75838075 2" x 2" x 12" ................. $11.25838076 3" x 3" x 12" .................$24.99838078 2" x 5" x 5" ...................$10.99

838079 2" x 6" x 6" ...................$15.99839044 2" x 8" x 8" ...................$19.99Walnut, Black152949 3/4" x 3/4" x 5" (5-pcs.) ... $5.9950W04 1/16" x 3" x 24" ............... $6.5050W05 1/8" x 3" x 24" ..................$7.9950W06 1/4" x 3" x 24" ...............$10.5050W52 3/8" x 3" x 24" .............. $11.50130830 1/2" x 3" x 24" ...............$10.99131562 3/4" x 6" x 36" ...............$30.50131601 3/4" x 4" x 48" ...............$26.5050W60 2" x 2" x 30" .................$15.9907A14 2" x 6" x 6" .................. $11.9907A26 2" x 8" x 8" ...................$15.99131554 3" x 3" x 12" ..................$27.99131563 3" x 6" x 6" ...................$25.99131564 3" x 8" x 8" ...................$42.99150946 21/4" x 51/4" x 141/4" ...... $9.99 Walnut, Claro131594 2" x 6" x 6" ...................$13.99131595 2" x 8" x 8" .................. $21.99131596 3" x 6" x 6" .................. $22.99131597 3" x 3" x 12" .................$24.99131618 4" x 6" x 6" ...................$24.99131619 4" x 8" x 8" ...................$49.99Wenge152950 3/4" x 3/4" x 5" (5-pcs.) .....$9.99127615 3/4" x 3" x 24" ...........$21.99

131132 2" x 2" x 24" ............. $24.99131130 2" x 6" x 6" ................$21.99131131 2" x 8" x 8" ............... $29.99829245 3" x 3" x 12" ............. $24.99Yellowheart 152951 3/4" x 3/4" x 5" (5-pcs.) ...$7.50124026 1/8" x 3" x 24" .................$8.99124027 1/4" x 3" x 24" ................. $9.99124029 3/4" x 3" x 24" ...............$12.50131615 3/4" x 4" x 48" ...............$24.99124031 2" x 2" x 24" .................$10.99124032 2" x 6" x 6" ..................... $9.50124033 2" x 8" x 8" .................. $11.99Zebrawood153013 3/4" x 3/4" x 5" (5-pcs.) ...$8.99124406 1/8" x 3" x 24" ................. $9.50124145 1/4" x 3" x 24" .............. $11.99124146 3/8" x 3" x 24" ...............$13.99130795 1/2" x 3" x 24" ...............$14.5006A54 3/4" x 3" x 24" ...............$16.99131616 3/4" x 4" x 48" ..............$49.99131576 3/4" x 6" x 36" ...............$53.99827375 11/2" x 11/2" x 12" ...........$6.9906A96 2" x 2" x 24" ................. $17.99125358 2" x 6" x 6" ...................$15.50125359 2" x 8" x 8" ...................$29.99838102 3" x 3" x 12" ................. $27.99843980 3" x 5" x 5" ...................$19.99838103 3" x 6" x 6" ...................$28.99

Mike Mahoney Hollow Forms And Urns A Workshop DVDMike takes you step-by-step through the process of creating beautiful one of a kind crafted hollow forms and lidded urns. While learning how to turn a hol-low form, Mike will show you how the cutter does it’s work inside the hollow form, and demon-strate how to create a threaded lid that adds the perfect finishing touch to your urn. 100 minutes.843443 ......................$24.99

Bowl Basics: A Workshop with Mike Mahoney DVDEnjoy learning the fundamentals as you begin turning simple dry bowls and progress to green wood projects. Mike will take you step-by-step through the turning process, from start to finish. 100 minutes.843442 .......................$24.99


New Products

152

MAGSWITCHWorkholdingSystemThe Magswitch Workholding System is a unique system that makes it incredibly easy to make a perfect cut every time. It’s the only workholding solu-tion you’ll ever need, because it fits every table. The system features Magswitch’s MagJigs fitted to the Universal Mount-ing Base to connect a variety of workholding attachments. These attachments help you position or guide wood with enhanced safety and qual-ity of cut. Use anywhere on all steel tables and fences with no miter slot limitation for unmatched speed and precision in setup. Just a simple 180° turn of the MagJig gets it done. The system centers on the Universal Mounting Base requiring two MagJigs to secure the base to a steel or cast iron surface. The Reversible Featherboard can be flipped for left-hand or right-hand feeds and accommodates the Vertical Featherboard for an added dimension of safety. Resaw Guide features roller bearing sup-port for firm, yet smooth gliding of wood through a bandsaw blade or sander. Dual Roller Guide is an ideal support for raised long or tall panels on table saws. The Ultimate Thin Stock Hold-Down/Rip Guide has a stepped side for most common sizes of 1/8", 1/4" and 3/8" thin material, while the opposite side is sloped for odd sizes up to 3/4". Available in 18" and 36" lengths, the Universal Track is 4" tall with one side that fits most standard 1/4" T-bolts and hex bolts, while the opposite side fits most standard 5/16" T-bolts and buttonhead bolts. MagJig 150 and MagJig 95 bolt to the Universal Base to provide 150-lbs. or 95-lbs. of holding force to any steel or cast iron surface. Starter Kit includes: Reversible Featherboard, Universal Mounting Base and two MagJig 150s. All components of the Magswitch Workholding System are sold separately. 152625 (D) workholding starter kit ..........$69.99149496 universal mounting base ........... $18.99152626 reversible featherboard ..............$14.99149497 vertical featherboard ................. $18.99149495 resaw guide ..................................$22.99149494 dual roller guide ...........................$24.99152627 (C) thin stock rip guide ................$19.99152628 (B) 18" universal track ................$29.99152629 36" universal track ......................$59.99147833 (A) MagJig 150 .............................$29.99147832 (A) MagJig 95................................$19.99

A

B

C

D

WOODCRAFT15oz.StainlessSteelShopMugA double wall, stainless steel shop mug keeps cold drinks cold and hot drinks hot, and you’ll never have to worry about breaking it. We’ll stop short of calling it unbreakable, but it would take a fair amount of abuse to make it leak.152651 .........................................................$5.99

HIGHPOINTXT®140SamplerScrewsPlusBitsAndCountersinkYou’re sure to find dozens of uses for our professional grade Square Drive HIGHPOINT XT Extra Torque Flat-head Screws, so we’ve gathered a sampler of 140 pieces of our most popular screws. Our HIGHPOINT XT line offers twice the torque of other screws for demanding applications and a deep thread design for greater holding power. Supersharp points pro-vide quicker starting, and the Square Drive recess resists bit slippage. Contents:50 - #8 x 11/4"; 35 - #8 x 11/2"; 30 - #8 x 13/4";25 - #8 x 2"; 2 - #2 SQ x 2" Two-Piece Driver Bits; 11/8" x 3/8" Make-It-Snappy CountersinkAND Coupon for 20% off Next HIGHPOINT Purchase152761 .......................................................$19.99

$1199QuickSetDrillPressHold-DownFeatures A 11/2" Dia. Rubber Foot145969 .........................................reg.$16.99147827 Large Rubber Footpad .............$2.99

Save$5

$1599TaperJig• Accurately Cuts Tapers Up To 3" Per Foot Or 15°• Includes A Graduated Scale Measuring Degrees And Inches Per Foot Of Taper• Aluminum Guide Bars With 25/8" Push Handle03R22• reg. $21.99

Save$6

Save$45

$6999HTC3000HDMobileBase• Moves Heavy Machines With Ease• Up To 700 lbs.• Adjustable From 14" x 14" to 22" x 54"146177 • reg. $114.99

$27994'of1/2"LinkBelt• Reduces Vibration In Any Of Your Belt Driven Machines With The Power Twist Link Belt• Retains Their Flexibility For Smooth Operation• Replaces 1/2" V-Belt145530 • reg. $33.99

Save$6

$2999WoodRiver® 50"ClampGuide•50" Extruded Aluminum Clamp Guide•No Need For C-Clamps Or Hold-Downs•Includes Tape Measure, Scales, And Integral T-Track Slots•Perfect Fence For Bandsaw, Drill Press, Or Router Table•Use With Circular Saw To Cut Sheet Goods Or Guide A Router For Dadoes149192 • reg. $39.99

Save$10

HTCPort-A-MateMegaViseIIEver needed an extra hand while working on a project? This hands free, foot operated vise is a very versatile “helper” when working alone or on big projects. The Mega Vise II has a capacity of 371/2" and folds up for easy storage. 152859 Mega Vise II ................... $149.99

LEDFlashlightsLED’s have revolutionized the flashlight industry by producing more “light” from smaller pack-ages. Woodcraft’s weather resistant flashlights are perfect examples, capable of producing an incred-ible amount of light from 3AAA batteries (included), but small enough to fit virtually anywhere. The 9LED light is the perfect pocket light at 31/2" long. Its diffuse beam is just right for tight spaces like closets, working inside a cabinet or under the hood of a car, or just making your way across a room. The SingleLED light is only 43/4" long yet it throws a powerful concentrated beam more like a much larger flashlight. Rated by the manufacturer at 51 lumens, the beam emitted by this light will penetrate the darkest night and shine brightly down the hall or across the yard. Both flashlights feature O-ring seals at joints for weather resistance. 149633 (A) 9 LED .........................................$3.99149634 (B) single LED ...............................$14.99

B

A

New Products


ACCURIGHT®CenterMaster™ FaceplateJigCutting round bowl blanks from square stock re-duces time and wear on your lathe. Plus, larger bowls near mini and midi lathe capacity can be turned easily when starting with round blanks. The AccuRight® Center Master™ Faceplate Jig utilizes a larger center-point block to provide extra support to large bowl blanks when cutting on the bandsaw using the Circle Cut-ting Jig. Combining the Center Master Faceplate Jig with the Bandsaw Circle Cutting Jig (sold separately) allows you to quickly cut bowl blanks to size and then perfectly align them to your threaded faceplate. Bowl blank thickness limited only by bandsaw resaw capacity. This jig can also be used with expanding jaw chucks. The threaded centering tool allows you to perfectly center your corresponding threaded face-plate on any blank with a center mark. AccuRight® Circle Cutting Jig is not included.1521931"-8TPI Center Master .................$39.99 15219411/4"-8TPI Center Master ............$39.99 149941AccuRight® circle cutting jig .......$64.99

WoodshopClockWithThermometerAndHygrometerWhat a great addition to any shop! You’ll not only know the time, but also the temperature and humidity with our Woodshop Clock and integrated thermom-eter/hygrometer. The 10" black face, chrome hands and markings are easy to read and good looking too! Temperature is displayed in 5-degree increments (Fahrenheit), while the hygrometer indicates relative humidity in 2% intervals. Quartz movement requires one AA battery (not included).146137 .......................................................$25.50

EasyCoperToolsTake the guesswork out of coping crown molding and baseboards! Coping is the preferred way to fit inside corners of crown molding and baseboard. Coped molding is actually one piece fitting over the other piece, instead of the two being mitered at the inside corner. Both jigs are quick, easy to use and the safest way to cope crown molding and baseboards using a jigsaw. EasyCoper includes left and right tooling for crown molding up to 51/2" wide. BaseCoper works with any size baseboard molding. Both jigs have detailed instructions with photo illustrations.151140 (A) EasyCoper, crown molding ... $34.99151141 (B) BaseCope, baseboard ...........$14.99

A

B

A

ForearmForklift®Although the Forearm Forklift× has been on the market for a few years, we were a bit skeptical when our sample arrived. Not anymore!! You get two straps of super strength webbing that encourage proper lifting (a fact that has not escaped OSHA) and somehow, manage to defy the gravitational effect on furniture, appliances, power tools and other heavy stuff. There is nothing fun about lifting or moving anything, but with the Forearm Forklif® you’ll get the job done safely and effectively.150708 .......................................................$19.99

WOODPECKERS® CopingSledThe Woodpeckers Coping Sled uses two techniques to secure your workpiece. First, it traps the board between the adjustable top plate and the fence. The slotted top plate is easily adjusted for material up to 51/2" wide. Trapping the board this way pre-vents the router bit from spinning the board, and controlling rotational force is the most important part of accurately shaping end grain. Second, two clamps hold the piece down to prevent lifting. Two clamp knobs are part of the clamp beam which is adjustable so it can easily be set to the center of the board. Two handles are used to lock the clamp beam in place. Their location is always directly above the clamping force and well away from the router bit. The primary purpose of the clear guide is to allow the sled to track along the fence rather than the miter slot. This approach is faster and easier to set up and eliminates the need to align your router fence perfectly parallel to the miter slot. Includes fully illustrated detailed instructions. 151148 .................................................... $139.99

HTCPort-A-Mate WoodRackThe Portamate Wood Rack is a multipurpose racking system that provides generous storage capacity for wood, pipes and other long items. For both external and internal applications, the unit suits workshops, garages and sheds. The powder-coated steel tube rack provides six levels of storage, holding 110 lbs. of material per level. Shelf brackets are 121/2" long, and wall standards are 39" long. The Portamate Wood Rack is easy to install.152860 .......................................................$79.99

FORREST6-PieceMagneticDadoShimSetEver needed just one more shim to make that perfect cut with your dado set? This six-piece Forrest Dado Shim Set is magnetic for easy placement, and the different thicknesses—0.010", 0.012" and 0.015"—provide the combinations you need to achieve perfection in your projects. Includes 2 of each magnet. 5/8" arbor. 152863 .......................................................$14.99

$799DrillBitStopCollars7-PieceSet• “Split-Ring” Design, Which Positively Locks Anywhere Along The Bit Diameter• Works On Both Standard And Brad-Point Bits• Will Not Move After Tightening142562 • reg. $10.99

Save$3

Save

15%ChopmasterSignatureLine90-ToothBlade• Premium Carbide Saw Blade• Use With Sliding Compound Miter And Radial- Arm Saw • Runout Of .001/.002• 300% Longer Life • 1/8" Kerf150266 10" (Shown) ................ reg. $169.99 SALE:$144.49150267 12" ..........reg. $179.99 SALE:$152.99

$209910-PieceForstnerBitSetIncludes 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 11/4", 13/8" And 11/2" Bits.147069 • reg. $41.99

Save

50%


New Products

154

WoodRiver®

LatheDust-CollectionHoodThis adjustable hood attaches to your mini, midi or full-sized lathe to use your dust collector or shop vacuum to contain most of the fine turning dust that flies into your face and covers your lathe and stand. While this hood is not intended for roughing operations, the 71/2"-square opening is ideal for pen turning, shaping spindles and small to intermediate bowl turning. Hinged clear plastic shield adjusts for optimal protection and collection and pivots out of the way for an unobstructed view while sanding. A magnetic plate and L-bracket allow you to easily attach the hood to cast-iron or steel lathe beds. Includes a 4" OD dust-collection port to utilize stan-dard collection hose or use an adapter to connect directly to your shop vacuum hose.152675 .......................................................$29.99

PowerToolVacuumHoseAssemblyFlexible hose assembly offers a simple connection between your shop vacuum and your portable power tools or specialty jigs equipped with 1" OD or 30mm ID dust ports. Lightweight construction allows freedom of movement, yet efficient dust collection during use with sanders, circular saws, routers and plate joiners, ensuring a clean, safe work environment. Soft, flexible fittings at each end of the hose adapt to your dovetail jig, mortise-and-tenon jig or pocket-hole jig to enhance chip collection at the source.152676 10' x 11/2" x 1" vacuum hose .......$19.99144655 (A) 11/2" to 21/4" adapter ................$4.99

A

DWVPVCPipeDust-CollectionSystemAdapterFittingsThese adapters allow you to connect 4" dust-collection hose and many dust-collection fittings to the light weight 4" DWV (drain, waste, vent) PVC pipe commonly available at home centers. DWV PVC which can be compared to Schedule 20 is preferred over the heavier Schedule 40 pipe used in the past. One end of the PVC DC Fitting Adapter slides inside the DWV pipe while the other end slides over the 4" port on many dust collection fittings such as elbows, tees, wyes and blast gates. The threads of the PVC Hose Adapter DC Fitting fit inside most 4" dust collection hose while the other end slides inside 4" DWV PVC pipe.151294 (A) PVC pipe to DC fitting adapter $6.99151295 (B) 4" hose to PVC pipe adapter ...$6.99

A

B

KEENPRODUCTS ForEnhancedDustCollectionKeen Products are designed to enhance dust and chip removal on most table saws and open stand router tables where the dust collection system on these tools lacks efficiency and convenience. The improved Dust Cutter II is a practical accessory for most contractor style table saws with design improvements in material construction and the ability to work with newer, larger table saw bases. The Dust Cutter II features three modes of opera-tion including Collector Mode, Funnel Mode and Vacuum Mode. The new Dust Router is the first dust collection accessory that works with router tables of open stand design to protect your router motor from harmful dust that is not collected by the router table fence. The durable, flexible Dust Cup™ will not interfere with height adjustment or changing bits while the T-Connector and hose allow you to still use your router table fence dust collection port. Both Keen Products work with most shop vacuums with standard 21/4" hose end fittings.151089 (A) Dust Cutter II ..........................$39.99151090 (B) Dust Router ............................$39.99

A B

Save 25%DustExtractionFittings Reg. SALE:85O06 (A) 4" ABS Blast Gate ....... $5.99 $4.4985O09 (B) Table Saw, 12" x 12" ....$7.99 $5.9985O10 Floor Sweep (Not Shown) . $9.99 $7.4985O11 (C) Elbow, 4" ...................... $6.99 $5.2485O12 (D) Splice, 4" ...................... $4.99 $3.7485O16 (E) Y, 4" ...............................$7.99 $5.9985U65 (F) Reducer, 4" to 21/2" .... $5.50 $4.12146489 (G) 4" Swivel ...................... $9.99 $7.49147759 (H) Fnl. Rdcr.,4" to 21/2" ... $3.99 $2.99

Save 30%ClearDustCollectionHoseClear, Flexible, Kink-Free, Wire Reinforced Hose127760 4" x 10' ........reg. $31.99 SALE:$22.39127761 21/2" x 10' ...reg. $21.99 SALE:$15.39

Save$5

$2999i-SOCKET VacuumAutomatorStarting Your Power Tool Automatically Turns On Your Shop Vac.147369 • reg. $34.99

$149921/2"RigidFlexDustSourceSetIncludes One Rectangular Nozzle, One Tapered Nozzle, Two Hose End Fittings And One 12" L (Expandable To 36") 21/2" Dia. Rigid Flex Dust Collection Hose.150512 Rigid Flex Set • reg. $19.99150758 21/4" Splice ....... reg. $2.99 SALE:$2.24

Save

25%

A B

DC

G

F

E

H

TRENDAirshieldPROIncludesFREETrendAirshieldEarmuffs,A$52RetailValue!*Features twin filters with 400% more f i l t r a t i o n a r e a than the standard Airshield providing superior protection from the inhalation of harmful dust. The motor is positioned away from the sensitive area of the forehead to reduce noise and irritation. The Ni-MH battery provides 8 hours of use and is located in the rear of the helmet for optimum balance and comfort. Providing up to 7.06 CFM of filtered air flowing across your face keeps you feeling fresh and cool and prevents the visor from fogging. The Airshield PRO comes complete with battery, battery charger, airflow indicator, clear visor overlay, and plastic carry bag. Weighs just 2.21 lbs. Provides eye protection to ANSI Z87.1 and respiratory protection NPF50 to EN 12941 TH2P. PRO clip-on earmuffs for hearing protection rated at NRR 22. 152709* Airshield PRO w/clip-on muffs ............. A $451 Value, Save Over $90! $359.00149031 TH2P filters (2) ........................... $53.00149032 visor overlay (10) ....................... $32.50149033 extra 8-hour battery ...................$70.00

New Products


SHINTO9"SawRaspThe Shinto Saw Rasp is a 9" flat rasp that is ingeniously made from 10 uniquely designed saw blades, with hardened teeth, that are “ganged” together with rivets to form the rasp. The teeth are oriented for a push stroke and a coarse and fine tooth configuration allows for aggressive and finer finishing cuts. The uniquely designed teeth help prevent clogging, but are easily cleaned if necessary. While the Shinto may appear odd when compared to traditional rasps, once you try it we think it will become one of your most used tools.151297 .......................................................$26.99

PINNACLE®6"PrecisionCarpenter’sSquareWithGraduationsThe Pinnacle×r® 6" Precision Carpenter’s Square is a perfectly machined combination 90° and 45° with handles for a physical reference to the edge of the workpiece. The blade is machined from cast and ground aluminum tooling plate which allows the tool to hold its accuracy for a lifetime. The handles are milled from solid bar stock and fastened to the body with high strength socket screws. Square is anodized for durability and laser engraved with high contrast inch scale markings on the vertical leg.152779 .......................................................$59.99

NORTONSoftTouchSandingSpongesThe Norton 41/2" x 51/2" Soft Touch Sanding Sponges feature a flexible foam back that contours to the shape of surfaces for an even scratch pattern. They are made with alumi-num oxide abrasive and are ideal for smoothing surfaces before an application of paint, primer or sealer. Turners love them, especially when turning pens, bottle stoppers, or even larger, more intricate turnings. Washable for extended use. Boxes contain 20 pieces of sanding sponge.152852 500-600 grit, superfine, single ....$1.99152853 500-600 grit, superfine, box ..... $34.99152854 800-1000 grit, ultrafine, single ....$1.99152855 800-1000 grit, ultrafine, box ..... $34.99152856 1200-1500 grit, micro fine, single $1.99152857 1200-1500 grit, micro fine, box $34.99

MIRKA 5”HalfRoundHook&LoopSandingPadMirka has developed another great innovation to utilize your current stock of 5" and 6" Hook & Loop sanding discs. This design allows the smallest detail work to be performed in tight areas while providing even pressure across details and curves. The Hook & Loop face holds the paper securely while providing an easy way to change grit when necessary. 152858 .........................................................$9.99

SHAB’SSandingBlocks/TubesAre you one of those woodworkers that use scrapwood blocks or short pieces of dowel rods to sand your proj-ects? If you’re chuck-ling now, you know the hassle of trying to hold onto the sandpaper while sanding. SHAB’S Sanding blocks and Tubes come with a locking groove to fasten the sandpaper into place and are sized accordingly to maximize the use of each sheet of sandpaper. No more make shifting sanding blocks. Made in the USA from 100% recycled PVC. Can be used in wet or dry sanding applications.152864 sanding blocks, 2-pack (shown) ...$9.99152865 sanding tubes, 3-pack...................$9.99LittleRedCap

Ingenious! These little caps simply roll on and off providing a clean, elegant yet simple solution to keeping your caulks and glues fresh and useable. We also found them perfect for keeping dirt out of our pneumatic couplings. They’re inexpensive yet durable enough to use over and over plus they’ll save you money in product you’d probably end up throwing away without them. Use on caulk tubes, glue bottles, paint tubes and pneumatic couplings.151206 .........................................................$5.99

MIRKA GoldflexSoftSandpaperSoft and flexible 4mm foam backed sandpaper has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand and is especially useful for woodturning and carving projects. The foam based provides added grip and even pressure, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. 200 pieces.151283 180 grit box ................................$74.99838783 240 grit box ................................$74.99151284 320 grit box (shown) ..................$74.99847106 600 grit box ................................$74.99

NORTON 3XContourSpongeA thin, single sided, sponge that you can use to sand small diameters and contours such as ceramics, spindles, turnings and railings.144251320 grit ...........................................$3.29150990220 grit ...........................................$3.29144252150 grit ...........................................$3.29144253100 grit ...........................................$3.29

$1762CROWNBurnisherScraper,RoundFeatures A Polished HSS Rod Fitted With A Comfortable Rosewood Handle. 71/4" Blade, 123/4" Overall142576 • reg. $23.50

Save

25%

$1399AccuScribeProThe AccuScribe Pro Makes It Easy To Maintain A Consistent Scribe Offset While Remaining Parallel To The Object Surface Every Time. 147402 • reg. $17.99

Save$4

$2799WoodRiver® DeluxeScraperSet• Features A Comfortable 53/4" Hardwood Handle And 11/2" Forward Knob For Reduced Wrist And Hand Fatigue• Five Blades: One Straight, Three Concave And One Convex• Wooden Case With Blade Storage Slots148723 • reg. $35.99

Save$8


New Products

156

ApolloHVLPApollo Sprayers International, renowned “origina-tor” of High Volume Low Pressure (HVLP) systems in the United States, continues its industry leader-ship today with HVLP systems engineered to meet the toughest environmental and safety codes, for user comfort and overall durability. Recognizing Woodcraft as a woodworking industry leader, Apollo created these HVLP Systems bundled with unique accessory packages exclusively for Woodcraft. These units produce significantly higher volumes of air at a higher psi which requires less thinning of your finish. Compare their ratings to the competition and you’ll find that Apollo’s three and four stage HVLP’s offer performance comparable to the competition’s four or five stage machines!

TheApolloTrueHVLP™ 835PowerSeriesis a 3 stage turbine HVLP spray system with 15% more power than previous 3-stage systems (7.0 PSI/115 CFM). This is the kind of muscle previously only seen in 4-stage systems. As such, the 835 will easily spray all solvent based materials such as: enamels, lacquers, stains, polyurethanes and most HVLP compatible waterborne coatings. This system is suited for smaller shops and home use. The 835's dual air filtration turbine is contained in a 12"H x 8.5"W x 15"L heavy duty steel housing. WoodcraftExclusiveAccessoryPackage includes: 1.0, 1.3 mm Needles/ Nozzles, Viscosity Meter and Cleaning Kit, a $130.35 Value

ApolloTrueHVLP835Specifications:• 3-Stage Turbine, 7.0 psi/115 CFM• 7500QT Atomizer Cup Gun• 24ft air-flex hose

ApolloTrueHVLP™835PowerSeries3-Stage Turbine with the 7500QT Atomizer Cup Gun152653 ....................................................$899.99

TheApolloTrueHVLP™ 1035PowerSeriesis a 4-stage HVLP spray system designed for pro-duction shops. Like the smaller 835, the 1035 also benefits from a dramatic 12% increase in power mea-sured at 9.0PSI/130 CFM. This kind of performance was previously reserved for 5-stage units. The 1035 is the superior way to spray solvent-based materials including: enamels, stains, lacquers, polyurethanes, catalyzed finishes, conversion varnishes, and linear polyurethanes, as well as any waterborne coatings, latex (emulsion) paint (thinned with Floetrol®× or similar flow additive) and other specialized materials such as faux paints and gel coat. If you’re serious about your work ,demanding the best possible finish and/or operate in a production atmosphere, this is the machine you want. The 1035's dual air filtration turbine is contained in a 12"H x 8.5"W x 15"L heavy duty steel housing.WoodcraftExclusiveAccessoryPackage includes: 1.0, 1.3, 1.5 mm Needles/ Nozzles, Viscosity Meter and Cleaning Kit. $194.70 Value

ApolloTrueHVLP1035Specifications:• 4-Stage Turbine, 9.0 PSI /130 CFM • 7500QT Atomizer Cup Gun• 24ft air-flex hose

ApolloTrueHVLP™1035PowerSeries4-Stage Turbine with the 7500QT Atomizer Cup Gun152654 (shown) ......................................$999.99

ApolloAccessories:Repl.AirFilterKit(2pc)152655 ..................................................... $32.95Repl.Pre-FilterKit(2pc)152656 ........................................................$6.95MiniCupAssembly8fl.oz.152657 ..................................................... $45.953-PackMiniCups8fl.oz.152658 ..................................................... $34.95Non-ReturnValve152659 ........................................................ $3.75

CupTopGasket152660 ........................................................$3.95RebuildKitfor7500QT152661 ......................................................$47.95SprayGunCleaningKit152662 ......................................................$36.95ApolloLatexKitFor7500QTSprayGun-2.0 mm Needle/Nozzle Combo and “C” Aircap• Optimized to Spray Latex Paint Like a Pro• Perfect for Trim, Doors and Cabinets152663 ...................................................$105.86

WATCO® ButcherBlockOilAndFinishSpecially formulated for use on wooden butcher blocks, cutting boards, salad bowls and other wooden projects requiring a food-safe finish. Easy to apply and maintain, nontoxic and safe for food contact when fully dried (meets government stan-dards of 21CFR 175.300). More durable than tradi-tional butcher block oils, Watco® Butcher Block Oil and Finish provides a rich lustrous sheen while actually protecting your wood surfaces. 152163 pint ................................................$16.99

WoodRiver®

FinishStrainersThe las t th ing on your work should be finish. Straining prior to application keeps undis-solved finish and foreign matter that may have been in your finish, off your work. It’s the begin-ning step in a first class finish whether you are brushing or spraying, plus it can help prevent problems with your spray equipment. WoodRiver® Strainers come in two different meshes: 125 micron recommended for all waterborne finishes and 190 micron recommended for all solvent based finishes. Convenient 6mm, wire stand to hold the strainer above your spray pot, mixing cup or can. Stand is 10" tall with a 4" ring at the top to hold the cones and a large 9" x 6" base for stability when straining finish.151298 (A) 125 micron, 10 pack ................$2.99151299 190 micron, 10 pack .....................$2.99152170 (B) strainer stand, only ..................$9.99

A

B

Strainers Sold Separately

BRIWAXSprayWax13.5ozBriwax in an aerosol spray. How cool is that? A silicone free, beeswax based product with an incredibly pleasant aroma is the quick and easy wax for those quick touch-ups before guests arrive or in between regular applications of paste wax! Plus, it is the perfect wax for a spritz on the bottom of a hand plane prior to use and even better for removing finger prints after use. This is such a great household product that you may have to hide it in the shop….or you could be a hero and buy the boss one too! 151316 .......................................................$12.99

Finishing: A To Z With Charles NeilDVDT h i s 10 DV D c o l l e c -t i o n i n c l u d e s : B u i l d -ing to Finish-Sanding & Smoothing; Preparing to Color-Repairing Defects; Color ing Wood - Dyes and Stains; Controll ing Color; Advanced Coloring Techniques; Spray Guns & Turbines; Spray Techniques; Spraying Top Coats; Hand Applied Finishes; Special Finishing Tech-niques. Over 13 hours total.149067 10 DVD set ................................$134.99

It's all About Color With Charles NeilDVDSit back and learn as Charles takes you through the process of selecting, preparing and achieving the best possible color out of six of the most pop-ular woods, Cherry, Oak, Maple, Walnut, Poplar, and Mahogany. Includes recipes for achieving color with water-based dyes and stains and instruction on choosing secondary woods for projects that blend beautifully with the primary wood of choice. Run time is 6 hours.151235 6 DVD set ......................................$79.95


New Products


Parker&BaileyWoodCareProductsParker & Bailey products originated when Mr. Bailey, a respected furniture maker joined forces with Mr. Parker, a manufacturer of fine waxes and polishes. A small container of Parker’s Perfect Polish was included with each furniture sale. Customers kept returning for more, which gave Parker the idea to join forces and package the products for everyone and the rest is history.

Parker&BaileyKitchenCabinetCreamParker & Bailey Kitchen Cabinet Cream is a safe, non-toxic formula that will gently remove daily cooking oils, resi-due, and fingerprints that are created everyday in the kitchen. Our original formula does not contain any waxes, silicones, or harmful solvents and will keep your kitchen cabinets looking new. 149845 8 oz. .............................................. $5.99

Parker&BaileyFurnitureCreamParker & Bailey Furniture Cream is a rich concentrated formula that does not contain dulling waxes, harmful silicones, or flammable solvents. This original safe, non-toxic formula has been used by the finest furni-ture restorers and antique experts for many years, with only the best results. Gently removes dirt, dust and fingerprints off any wood surface.149846 8 oz. ...............................................$5.99149848 16 oz. (shown) ................................ $7.99

Parker&BaileyNaturalLemonOilPolishParker & Bailey Natural Lemon Oil cleans, renews, and penetrates fine wood finishes replacing woods natural oils. Use on a dust cloth to pick up dust like a magnet while enriching the wood’s surfaces. Our high qual-ity blend of oils will also protect your wood surface from sun fading, drying and cracking. 149847 16 oz. ..............................................$6.99

Parker&BaileyWoodFloorCleanerOur advanced formula with a touch of vinegar and natural cleaning ingredients is non-toxic and 100% environmen-tally friendly. This unique formula gently lifts dirt off any floor surface without harming the floor’s finish. Great for hardwood, laminated and faux finished floors. Not recommended for use on previously waxed floors.149849 22 oz. ..............................................$5.99

157

VersaSpin™360The Versa Spin™ 360 is a unique and versatile project support that permits you to securely and effortlessly rotate projects vastly improving results and in the end, saving time and effort. With the in-cluded Painter’s Pyramids® and Grabbers™, the 360 is suited to a variety of applications from sanding, light machining, or finishing, to decoupage, arranging flowers or fruit and cake decorating. Available in two sizes: 11" – 25-lb. weight capacity with 4 Painter’s Pyramids® and Grabbers™ ; 16" – 100-lb. weight capacity with 8 Painter’s Pyramids® and Grabbers™.152716 11" .................................................$24.99152717 16" (shown) .................................. $34.99151238 (A) painter's pyramids (10) ............$5.99

Grabbers™Grabbers™ are small, flat, triangle shaped, nonslip pads that are in-cluded with your Versa Spin 360. They’re designed to work in conjunction with the Versa Spin’s nubby surface to provide secure lateral grip during appli-cations, like sanding, where pressure might cause your project to slip or slide off the support. Grabbers come in packs of four.152718 .........................................................$3.99

Fine Woodworking VideoWorkshopSeriesFine Woodworking’s DVD series, geared for woodworkers of all skill levels, was developed to demonstrate important woodworking techniques. The Mission-Style Bed (A) introduces three techniques for machine-cut mortise-and-tenon joinery, shop tips and lumber-buying strategies that save money. Run time: 50 minutes. Monster Workbench (B) features a thick top on a sturdy base with both glued and knockdown mortise-and-tenon joints, along with twin-screw vise and plenty of useful dog holes. Run time: 34 minutes. In Bookcase with Bracket Feet (C), watch a pro construct a sturdy case and face frames, cut curves with a bandsaw, edge plywood, shape moldings, and glue up. You will also learn how to customize your bookcase with either flat or ogee bracket feet. Run time: 43 minutes. The Small Tool Cabinet (D) features sliding dovetails and an unorthodox face frame for greater strength and better looks. Additionally, learn tech-niques for creating shop-made moldings and bandings, precise mitered corners, and perfectly fitting doors and drawers. Run time: 66 minutes. As an added bonus, all DVDs include a digital SketchUp plan.152844 (A) Mission-Style Bed .................$29.95152845 (B) Monster Workbench .............$29.95152846 (C) Bookcase W/Bracket Feet ...$29.95152847 (D) Small Tool Cabinet ................ $29.95

BrushLuggMagneticBrushHolderHow many times have you leaned your brush against a can of finish or balanced it on the rim only to have it fall, always doing damage or making a large mess. Never again with the Brush Lugg! Simply clip the Brush Lugg on the rim of your can, and its magnet holds your brush by the ferrule so that the bristles are angled over the open can. Any excess finish drips off the end of the bristles into the can, rather than running up into the ferrule or dripping into the lip of the can. The Brush Lugg even has a metal tab to open cans.149222 .........................................................$2.99

TITEBOND®

GREENchoice™ NeoprenePlusContactCementTitebond® GREENchoice™ Neoprene Plus Contact Cement is a fast-grab, nonflammable adhesive that spreads easily over large surfaces. This post-forming, heat resistant adhesive specializes in bonding decorative laminate, veneer, leather and rubber sheeting to plywood, particleboard and other wood-based composites. Its fast set and professional strength allow for immediate trimming, cut filling or ma-chining after application. Neoprene Plus Contact Cement is VOC-compliant and meets GreenSeal GS-36 product specification, making it nontoxic and not harmful to the environment. This product does not give off a strong offensive odor and cleans up easily with water while wet. Quarts only in both neutral/clear and blue/green.152933 neutral/clear ................................$19.99152934 blue/green (shown) ......................$19.99

Save 20%WaterproofTitebondIIIGlue• Waterproof Wood Glue Without The Mess• Cleans Up With Water Reg. SALE:145560 4 oz. .......................................................$4.50 $3.60145561 8 oz. .......................................................$6.50 $5.20145562 16 oz. .....................................................$8.99 $7.19145563 32 oz. ...................................................$14.50 $11.60145564 Gallon ..................................................$35.99 $28.79

$999WalnutOil,16oz.• Just Wipe On Or Immerse And Let It Penetrate And Harden For 24 Hours, Then Reapply As Desired• Leaves A Great Satin Finish On All Hardwoods And Exotic Woods• Contains No Petroleum Distillates• Completely Safe For Food Contact146022 • reg. $13.50

Save$350


New Products

$1199eachDiamondSharpeningCard•Monocrystalline Diamond Particles•Water Used As The Lubricating Wash•Great For Knives And Router Bits•Small Size Make Carrying These In An Apron Pocket Very Efficient143652 Extra Fine • reg. $15.99143653 Fine • reg. $15.99143654 Coarse • reg. $15.99

158

3-PieceBrushSetThis is a great all around mini brush set for any detail work or cleaning, whether it’s metal parts or a delicate carving in wood. The set contains one each of stainless steel, brass and nylon brushes, and are approximately 7" long. Each brush has two bristled areas, one main area 11/2" x 3/8" and a smaller forward facing 3/8" x 3/8" area.151269 .........................................................$3.99

BOSTITCH CAP1512-OF1.5HP,1.2GallonHighOutputCompressorINTRODUCTORYOFFER!$129.99• High-output oil-free pump delivers 2.8 CFM at 90 PSI • 150 PSI max operating pressure for multiple finish tool operation • 2.0 HP (Peak), 1.5 HP (Running) • Motor draws 12 amps for easy start up • 1.2 gallon compact design • 23.5 lbs. for easy portability • Integrated control panel w/roll cage protects gauges from jobsite damage 152918 ............................................. reg. $139.99

RapidAirCompressedAirPipingSystemAre you searching for an easy, flexible solution to provide compressed air to the growing number of pneumatic tools in your woodshop? RapidAir is a complete compressed air distribution system that is designed to easily install beneath walls of new construction, or on wall surfaces of existing workshops. Imagine putting compressed air lines exactly where you want them, just like electrical outlets. No more dragging hoses across the shop to your work area. No special tools required; simply push the flexible tubing into the fittings. Put up your system in an afternoon. Aluminum blocks used in the air outlet kit and compressor manifold kit have multiple ports to allow you to customize between surface mount, in-wall, and ceiling mount. Master Kit includes: two air outlet kits, one compressor manifold kit, 100-ft nylon tubing, tubing cutter and installation instructions. Quick-connect fittings not included. Add additional air outlet kits and fittings listed below to create your own custom system.152558RapidAir Master Kit (shown) .... $139.99152559air outlet kit ..................................$29.99152560compressor manifold kit ............ $34.99152561100' tubing .................................. $54.99152562 3/8"-NPT adapter ............................$4.99152563 tee-fitting ........................................$5.50152564union elbow ....................................$4.501525653/8"-NPT elbow ................................$6.50152566straight union .................................$4.50152567 tubing clamps, 12-pc. ...................$3.99

NORTONMicro-FiberClothsMicro-Fiber material picks up dust and moisture most cleaning cloths leave behind. Micro fiber starts with a single fiber, smaller than a human hair, which is split 16 times to increase the surface area. Individual, 16 strand fibers are woven into a nappy cloth with millions of debris trapping spaces. Once washed with soapy water, all debris is released and the micro fiber material is ready for the next task. Bluecloth is used for general wet or dry applications and cleans best when surfaces are sprayed with a light water mist. Red has a woven terry cloth works great for use on wood as a dry tack cloth before finishing. Yellow is a polishing cloth that produces streak free cleaning, or other buffing/polishing applications. All micro fiber products can be used with or without chemicals. Cloths are 16" x 16".146375 (A) general purpose - blue .............$4.99146376 (B) tack cloth - red ..........................$4.99146377 (C) polishing - yellow ......................$4.99

A BC

GREX18-gauge2"BradNailer,GreenBuddySuperior internal con-s t ruc t ion p rov ides smooth and accurate operation. The one-piece hardened steel driver design is precision machined and works in conjunction with the precision machined, anodized internal cylinder and piston valves for robust performance.

Specs:• Size: 91/2"L x 91/4"H x 2”W • Weight: 2.9 lbs. • Operating Pressure: 70 - 120 PSI • Fastener: Type 18-Gauge Brad Nails • Fastener Range: 1/2" - 2" • Fastener Capacity: 1 Strip (approx. 100 brads) • Air Inlet: 1/4" NPT Male Plug849249 .................................................... $199.99

Save$10

$3499KingArthurToolsLancelotWoodcarvingDiscs• Special Chain Saw Blade Which Is Securely Held Between Two Stainless Steel Plates• Mount In A 4" Or 41/2" Angle Grinder• Maximum 14,000 RPM• 14 Tooth Great For “Roughing-Out”• 22 Tooth Smoother “Finished” Surface04D02 14T, 5/8" Arbor (Shown) • reg. $44.9904D04 22T, 5/8" Arbor • reg. $44.99

$1499JetJointingClamps-SetOf2• Clamps Slip On Easily And Hold Tight, But Still Manage To Allow Minor Tweaking• The Spring Steel Jaws Are Stainless And The Composite Block Is Fiber-Filled Plastic• Work On Any Length Stock And Align Right Angle And T-Butt Joints Automatically143729 • reg. $29.99

Save

50%

Lin-SpeedGunstockFinishAndCareOilLin-Speed is simply highly refined, “ket-tle cooked” linseed oil with a touch of “petroleum thinner.” It is or was primarily a gunstock finish until we received our sample. The problem with linseed oil is that while it looks great, it rarely completely dries. Lin-Speed changed that without driers or other additives. We went from never having heard of Lin-Speed to loving this stuff in about a week. Use it on tool handles, knife scales, gunstocks or anywhere you want that beautiful hand rubbed glow! Indoors or out! Lin-Speed is best applied in multiple light coats with your fingertips (really) with 2-6 hours (overnight is better) between them. Two ounces per glass jar— enough for 6 gunstocks or 12 (maybe) jewelry boxes.152935 .........................................................$9.99

New Products


SORBYSovereignUltimaHollowingToolsForming another portion of the Sovereign System, the Ultima Hollowing Tools enable woodturners to produce a variety of hollow form shapes from the traditional vase to a “squashed” form. Available in two sizes, the small version will allow you to turn up to an 11" hollow form, while the medium version will produce up to a 16" hollow form. With the unique micro-adjust feature you will be able to easily set the depth of cut for the task at hand. The cutters are made from a high grade of HSS and can be rotated several times before sharpening will be required. For added capability an additional link may be added to allow for extreme undercutting. A finish cutterhead is also available to achieve a smooth finished surface for that final cut. Small blade length is 161/8", medium blade length is 181/8". 152171 small blade ................................ $149.99152172 (A) medium blade ...................... $169.99152173 (B) replacement cutter ............... $21.99152174 small link ......................................$19.99152175 small finish cutter ....................... $40.50152176 (C) medium link ............................$19.99152177 medium finish cutter .................. $40.50

CB

A

A B

CWood Sold SeparatelyKitchenUtensilKits

Spice your dinners up by creating your own custom flatware, steak knives or carving knife and fork. These utensils are crafted from quality stainless steel sure to provide you with many years of use. Complete instructions are included. 847571 (A) flatware 3-pc. ..........................$16.99847572 (B) steak knife 4-pc. ....................$16.99847573 (C) carving knife & fork ................$16.99

A

BCROWN ThreadChasingToolSetsThe art of thread chasing is still the quickest and easiest way to apply threads to your wood turning projects. With a little practice, along with the in-cluded instructions from Legendary English turner Bill Jones, you can quickly learn to cut threads on boxes or center work. Three tools are required to chase threads, #1 - an outside and inside chaser tools, #2 - a thread chaser recess tool and #3 - a lathe that can be slowed down to 100 – 300 rpm’s. When hand chasing female threads, a small recess must be cut at the bottom of the threads to allow lifting the chaser without damaging the threads. This scraper quickly and cleanly cuts a perfect recess while leaving a clean groove that is unnoticeable in your finished project. Thread chasers work best in dense hardwoods and are sold as a set (one inside and one outside chaser). 5" handles, approx. 10" overall length. 151213 (A) 12 TPI (ins./outsidechaser) ...$74.9912983620 TPI (ins./outside chaser) .......$74.99151214 (B) thread chaser recess tool .... $21.99

CROWNDavidEllsworthSignature3/8"GougeDesigned with a parabolic flute and a very specific tip shape by David Ellsworth, this is the most versatile 3/8" bowl gouge on the market. It will perform huge roughing cuts and delicate finish cuts on both the inside and outside of open bowls and hollow forms. Honing required before use. Blade length is 911/16", handle length 161/16", overall length 253/4". 151209 .......................................................$94.99

TOUGHBUILT™ Cliptech™PouchesThe Toughbuilt™ System transforms how profession-als carry tools, fasteners and supplies. The patented Cliptech™ system allows the pouch to clip on and off any belt or stand on the ground using a kickstand to keep tools close at hand. The ClipTech system allows tools to stay in the pouch or in wall storage when using the 24" Cliptech™ Bracket. Rugged six-layer construction, pockets designed for specific tools, and other innovative features help you manage the tools you use every day. Heavy-duty rivet reinforcements, high quality materials and abrasion resistant rubber bottoms enable these reliable pouches stand up to any job thrown at them. Limited lifetime warranty.152901 (A) Mega Supply Pouch .............. $34.99152902 Drill Holster ..................................$24.99152903 Technician’s Pouch ......................$19.99152904 (B) Project Pouch .........................$19.99152905 Universal Pouch ...........................$19.99152906 Utility Pouch ...................................$9.99152907 Tape Measure Pouch .....................$9.99152908 Cliptech™ Hub™ 3-Pk. ...................$9.99152909 Hammer Loop ................................ $7.99152910 24" Wall Bracket ............................ $7.99152915 Cell Phone Pouch ........................ $11.99

TOUGHBUILT™SoftboxStorageBagsThe Toughbuilt™ Softbox Storage Bags transform how professionals manage storage, fasteners and supplies. Multiple sizes provide versatility that fits everything from fasteners to power tools. Featuring heavy-duty mesh windows, easy carry handles, large hanging grommets and wide zippered openings, these Softboxes provide superior visibility and ac-cessibility. The 11" Tool Mate has Velcro dividers to separate small parts or can be removed to store larger work materials. Both products have a label window to make organization a breeze. Made with rugged, structured sides, these Softboxes withstand the most rigorous work environments. Limited lifetime warranty152913 (A) Octagon Tower 3-pk. .............$14.99152914 (B) Octagon Tool Mate 3-pk. ......$24.99

TOUGHBUILT™ProjectBagsThe Toughbuilt™ System transforms how profes-sionals carry tools, fasteners and supplies. The patented Cliptech™ system allows the pouch to clip on and off any belt and onto the bag itself, efficiently adapting to every job at hand. With rugged heavy-duty rivet reinforcement, high quality materials and abrasion resistant rubber bottoms, these reliable bags and pouches stand up to every job thrown at them. Limited lifetime warranty.152911 13" Project Bag ............................$49.99152912 8" Tote & Universal Pouch ......... $44.99

$2999WoodRiver®SmallLaminatedSteelKnifeKit7" Overall Length, 31/8" Blade Length148361 • reg. $40.50

$4999WoodRiver®LargeLaminatedSteelKnifeKit91/4" Overall Length, 5" Blade Length148360 • reg. $70.50

Save$1050

Save$2050

$1999DropPointSkinnerKnifeKit81/4" Overall Length; 35/8" High Carbon Stainless Steel Blade147830 • reg. $24.99

Save$5


A B A B

A B

www.woodcraft.com


New Products

$1527TheRinehartRollerballPenKitThe six-faceted nib gives the look of changing shades as light reflects from the angled surfaces. Kit is furnished with a quality rollerball refill and is approximately 51/8" overall closed length.151236 Chrome ..........................................$19.09151237 Gold ...............................................$19.09146019 Bushings ......................................... $6.39

160

Pre-DrilledDeerAntlerPenBlankSetIf you have ever tried to drill deer antler before you know how frustrat-ing and difficult it can be. We’ve solved the problem for you with these predrilled blanks. No more failed attempts at drilling a straight hole in a curved piece of antler. Color tones and diameters may vary as this is a nature grown product. Each set contains two pieces of antler that will be a minimum of 2" in length. Marrow may be found these blanks and is not considered a defect. Marrow areas should be treated like any other porous wood. Apply CA glue before sanding to keep the pores from filling with dust.151159 7mm pre-drilled ............................$14.99151160 10mm pre-drilled .........................$15.99

FijiPenBlanksNo two will ever be alike WITH these blanks which feature a perfect pairing of Mother Nature and science. The intense grain patterns are the result of hand selected figured burled wood caps painstakingly cast in colored resins to give the figured burls the stability necessary for turning. Once turned and ready for finish, several dense coats of thin CA can be used to seal the wood and create a uniform sheen over the entire blank. Blanks measure 3/4" x 3/4" x 51/4".151150 (A) burgundy .................................$19.99151151 (B) fuchsia.....................................$19.99151152 (C) lavender ..................................$19.99151153 (D) Pacific blue .............................$19.99151154 (E) fern ..........................................$19.99151155 (F) mint ..........................................$19.99151156 (G) mango .....................................$19.99

A

B

C DE GF


ElectraRollerballPenKitWith its elegant lines and sophisticated beauty, the Electra pen kit features a stunning blend of Chrome and Gold accent platings that makes this truly a distinctive pen. The unique faceted cap accent ring and the diamond-cut accented clip reflect light giving the appearance of changing shades of gold.151259Electra pen kit ..............................$19.09151260Electra pen kit bushings ...............$4.29151261 Electra pen kit repl. tubes (5pc) ...$4.29151257 WoodRiver® 10.5mm pen maker’s bit ... .........................................................$6.99


CoffeeBeanPenBlanksYou have to see them to believe them! These unique blanks are packed full of real coffee beans, your shop will literally smell like a coffee house while you turn. You will need to be patient and take it slow with very sharp tools for the best results. Blanks size is 3/4" x 3/4" x 51/2". Pen kits starting on page 138, sold separately. 150637 tan .................................................$14.99150638 magenta .......................................$14.99150639 baby blue ......................................$14.99150640 mint green ....................................$14.99150641 pure white .....................................$14.99


ExoticPenBlankComboPacksWe’ve assembled two giant assortments of exotic pen and pencil blanks (3/4" x 3/4" x 5"), that allow you to economically sample a wide variety of wood from Africa, Central America and South America. Kit (A) contains 4 each of the 8 most popular exotic wood species: Black Palm, Bocote, Striped Ebony, Purpleheart, Osage Orange, Padauk, Cocobolo, and East Indian Rosewood. Kit (B) contains 11 each of the 9 most exciting exotic wood species: Black Palm, Bocote, Striped Ebony, Purpleheart , Osage Orange, Padauk, Cocobolo, East Indian Rosewood and Honduran Rosewood.152840 32-pc. combo pack, shown .........$39.99152841 99-pc. combo pack ......................$99.99

Save

20%


$1490eachWallStreetIIICircuitBoardPenKitsThese unique kits feature a real circuit board that is completely encapsulated in clear acrylic with the brass tube already glued into place. Includes Wall Street III pen kit.149591 (A) Green Chrome ................. reg. $21.29149592 Green Gold ............................ reg. $21.29149996 (B) Orange Chrome............... reg. $21.29149997 Orange Gold .......................... reg. $21.29150642 (C) Blue Gold ......................... reg. $21.29150643 Blue Chrome ......................... reg. $21.29150964 (D) White Gold ...................... reg. $21.29150963 White Chrome ....................... reg. $21.29147478 Wall Street III Bushings .................$5.99

A

D

B

C

Save

30%

$499eachPolyResinPenBlanksWhat makes these so unique is the process by which they are created. Painstaking layer-by-layer construction and placement under high heat and pressure produce these detailed and intricate patterns. Pen blank size is 3/4" x 3/4" x 5". For the ultimate finish we recommend wet sanding with Micro-Mesh kit #145982.150832 (A) Candy Cane ..............................$5.99 150833 (B) Limeade ...................................$5.99150834 (C) Champagne .............................$5.99150835 (D) Lavender Twist ........................$5.99150836 (E) Mochachino .............................$5.99150837 (F) Snowflake Blue ........................$5.99150838 (G) Birthday Sprinkles ...................$5.99150839 (H) Confetti ....................................$5.99

A

H

B

C

D

E

F

G

Wood Sold Separately.$679ToniTwistPenKitThis easy-to-turn, twist style pen is sure to be a winner. Uses the same 7mm tubes and twist mechanism as the slim style pens, but features a fuller shape, unique clip and center ring.145227 • reg. $8.49

Save

20%

Save 20%RazorKitsEveryone deserves to be pampered, and our classic razor kit will do just that. Our durable plated razor kits utilize any standard Gillette® Mach 3® refill. Reg. SALE:152609 (A) Satin Chrome .......... $13.79 $11.03152610 (B) Bright Copper ..........$15.99 $12.79152611 (C) Black Titanium ........$21.29 $17.03151092 (D) Chrome .............reg. $12.79 $10.23151093 Bushings For Razor Kit ..$5.29

B

A

D

C

New Products


WoodRiver®UniversalPenTubeInsertionToolKeep the glue where it belongs and not on your fingers with this versatile tube insertion tool that works with pen tubes from 7mm to 37/64 inch in diameter. After you’ve applied glue to your blank, slip the pen tube onto the chrome plated shaft and insert the tube into the blank.151050 ...................................................... $11.99

161

KnifePinStockUsed to align and attach knifes scales; pin stock may also be used to create pins, rivets, guards and pommels. With your choice of 3/16" diameter, 360 Brass or 303 stainless steel, you will be able to create that one of a kind custom knife. Two 6" pieces per bag. May be used with other Woodcraft knife kits.150759 (A) 303 stainless steel ..................$3.99150764 (B) 360 brass .................................$3.99

A

B

TritonRollerballPenKitsFeaturing a contemporary design in traditional Gold and Chrome platings, the Triton pen kit commands your attention, from its beautifully crafted diamond pattern center band to the floral pattern end cap. Pen kit comes with a high quality ceramic rollerball refill. 151262gold w/chrome ............................$23.39151263chrome w/gold .............................$23.39151264bushings .........................................$8.49151265 replacement tubes ........................$4.29151257 WoodRiver® 10.5mm pen maker’s bit ... .........................................................$6.99151258 WoodRiver® 12.5mm pen maker’s bit ... .........................................................$8.99


CigarCircuitBoardPenBlanksDesigned and created to fit any Cigar Pen Kit, these Circuit Board blanks allow you to choose any plating of your choice giving you total custom-ization. These blanks feature a real circuit board that is completely encapsulated in clear acrylic with the brass tubes already glued into place. No cutting, drilling or gluing involved. Simply square off the ends of the preassembled blanks, mount them onto your mandrel with the bushings and start turning! Uses Premium Cigar bushings (#147161).150965 red .................................................$23.39150966 white .............................................$23.39150967 green .............................................$23.39


CartridgeBulletButtonClickPenKitThis is the perfect pen for the outdoorsman or hunting enthusiast. The kit looks like a real 30 caliber shell right down to the copper plated nib. This unique kit features a smooth operating click mechanism for ease of use, and is complemented by the Parker style ball-point pen refill.151303Woodcraft gold.............................$12.79151304chrome ..........................................$12.79


TheRinehartRollerballPenKitThe Rinehart Rollerball is named in honor of Tim Rinehart, a 19-year member of the Woodcraft fam-ily in our Product Development Department. As a Senior Product Manager, Tim was integral in the development and introduction of the Woodcraft pen turning program. Overall closed length approx. 51/8".151236chrome .........................................$19.99151237 gold ...............................................$19.99146019 bushings .........................................$6.39147952 replacement tubes ........................ $3.79


TheRinehartBallPointPenKitThe Rinehart Ball Point honors Tim Rinehart, a 19-year member of the Woodcraft family and product development manager responsible for launching Woodcraft’s initial pen kits. This unique pen fea-tures a six-faceted nib which changes “shades” as light reflects on its angled surfaces, along with a double-twist mechanism and high quality Parker-style ball point refill.152730 chrome ..........................................$12.99152729 gold ...............................................$12.99

TritonBallPointPenKitThe contemporary designed Triton Ball Point Pen includes a beautifully crafted diamond pattern center band and floral pattern end cap. Additional features include traditional gold or chrome plating, a double-twist mechanism and a quality Parker-style ink refill.152726 gold and chrome accents ...........$14.99152727 chrome and gold accents ...........$14.99152728 bushings for ball point...................$5.99

NORTONPSAClothSandingDiscsNorton professional abrasives are known for their durability and high quality. The PSA ( p r e s s u r e - s e n s i t i v e adhesive) is bonded to a cloth disk and has a durable, sharp aluminum oxide abrasive. This non-pigmented, water-based stearate (anti-clog) coating provides an aggressive, cool cutting, abrasive that resists loading and won’t contaminate the finish. 5"PSAclothsandingdiscs, 2 discs per pack.15255480 grit .............................................$3.99152555120 grit ...........................................$3.99

6"PSAClothSandingdiscs, 2 discs per pack.147114 80 grit .............................................$6.99146381 120 grit ...........................................$6.99146382 220 grit ...........................................$6.99

AcrylicPenBlanksThese pen blanks take a beautiful polish that gives the appearance of a liquid tube. No topcoat finish is necessary. Blanks measure 3/4" x 3/4" x 5". Blanks turn and drill easily. Use Micro-Mesh sandpaper for the ultimate polished finish.

Each 5+ 10+152765 lucky clover $4.99 ... $4.50 ...$3.99152766 scarlet and gray152767 red and white swirl152768 liquid metal152769 psycho152770 planet earth152771 creamsicle

152772 charcoal ............$4.99 ... $4.50 ... $3.99152773 orange sorbet152774 plumfusion152775 inferno152776 red delight152777 scribbles152778 candy coated

Each 5+ 10+


New Products

162

Woodcraft Stores In your Area Offer Classes, Demonstrations & Sales! Everything For The Woodworker... Find out more, visit www.woodcraft.com

New Hampshire Portsmouth/Newington: 603-433-6116 25 Fox Run Road Newington, NH 03801

New York Rochester: 585-292-9690 Henrietta Plaza 1100 Jefferson Road Rochester, NY 14623 Buffalo: 716-674-0795 1900 Ridge Road West Seneca, NY 14224

North Carolina Charlotte/Matthews: 704-847-8300 1725 Windsor Square Dr. Matthews, NC 28105

Greensboro: 336-235-0900 504 Four Seasons Twn. Ctr. Greensboro, NC 27407

Raleigh: 919-781-1911 4317 Pleasant Valley Rd. Raleigh, NC 27612

Ohio Cincinnati: 513-407-8371 Tri-County Towne Center 11711 Princeton Pike, Suite 251 Cincinnati, OH 45246

Cleveland/Bedford: 440-232-7979 Hawthorne Valley Shopping Center 23226 Broadway Ave. Oakwood Village, OH 44146

Columbus: 614-273-0488 1077 Bethel Road Columbus, OH 43220

Dayton: 937-438-1282 Cross Pointe Centre 175 East Alex-Bell Rd #264 Dayton, OH 45459

Rockville: Woodworker's Club 301-984-9033 4950 Wyaconda Road Rockville, MD 20852

Massachusetts Boston/Woburn: 781-935-6414 313 Montvale Avenue Woburn, MA 01801

West Springfield/ Manchester: 413-827-0244 239A Memorial Avenue W. Springfield, MA 01089

Michigan Detroit Area: Canton: 734-981-6808 42102 Ford Road Canton, MI 48187

Sterling Heights: 586-268-1919 39245 Van Dyke Hwy. Sterling Hts, MI 48313

Grand Rapids: 616-957-9663 4265 28th St. SE., Suite C Grand Rapids, MI 49512 Saginaw: 989-249-6662 2268 Tittabawassee Rd. Saginaw, MI 48604

Minnesota Minneapolis/ Bloomington: 952-884-3634 9125 Lyndale Ave. South Bloomington, MN 55420

Missouri St. Louis/ Maryland Heights: 314-993-0413 2077 Congressional Drive West Port Area St. Louis, MO 63146

Idaho Boise: 208-338-1190 Overland Park Shop Ctr. 6883 West Overland Rd. Boise, ID 83709

Illinois Chicago Area: Libertyville 847-680-9663 1177 S. Milwaukee Ave. Libertyville, IL 60048 Woodridge: 630-435-9663 7440 Woodward Ave. Suite A 107 Woodridge, IL 60517

Indiana Evansville: 812-479-9663 Eastland Place Shop. Ctr. 721 N. Greenriver Road Evansville, IN 47715

Indianapolis: 317-578-3400 7330 East 86th Street Indianapolis, IN 46256

Kansas Kansas City/Lenexa: 913-599-2800 8645 Bluejacket Road Lenexa, KS 66214

Kentucky Lexington: 859-231-9663 3028 Blake James Drive Lexington, KY 40509

Louisville: 502-671-0900 1850 So. Hurstbourne Parkway, Suite 148 Louisville, KY 40220

Maryland Baltimore/Towson: 410-828-7426 Towson Overlook 1123 Cromwell Bridge Rd. Towson, MD 21286

Alabama Birmingham/Pelham: 205-988-3600 2215B Pelham Parkway N. Pelham, AL 35124

ArizonaPhoenix/Chandler:

480-539-9663 3002 N Arizona Ave. Ste. 12 Chandler, AZ 85225

Tucson: 520-742-9663 Oracle Plaza Shopping Ctr 6230 N. Oracle Road #100 Tucson, AZ 85704

California Orange County/Stanton: 714-899-1422 Village Shopping Center 12781 Beach Boulevard Stanton, CA 90680

Sacramento: 916-362-9664 9523 Folsom Blvd. Sacramento, CA 95827

San Francisco Bay Area: Dublin: 925-875-9988 6044 Dougherty Road Dublin, CA 94568

San Carlos: 650-631-9663 40 El Camino Real San Carlos, CA 94070

Ventura: 805-658-9663 3860 East Main Street Ventura, CA 93003

Colorado Colorado Springs: 719-266-9889 750 West Garden of the Gods Road Colorado Springs, CO 80907

Denver: 303-290-0007 6770 S. Peoria St. Centennial, CO 80112

Loveland: 970-292-5940 3718 Draft Horse Road Loveland, CO 80538

Connecticut Hartford/Manchester: 860-647-0303 249 Spencer Street Manchester, CT 06040

Norwalk: Woodworker's Club 203-847-9663 215 Westport Avenue Norwalk, CT 06851

Delaware Wilmington/New Castle: 302-323-0400 Shoppes of New Castle 166 S Dupont Hwy, Ste. H New Castle, DE 19720

Florida Fort Myers: 239-274-9663 3853 Cleveland Ave. Suite E Fort Myers, FL 33901 Jacksonville: 904-721-9796 9280 Arlington Expy Unit 20A Jacksonville, FL 32225

Orlando: 407-260-5002 8155 So. US Hwy. 17-92 Fern Park, FL 32730

Tampa/Clearwater: 727-532-6888 18891 US Highway 19 N. Clearwater, FL 33764

Georgia Atlanta: 770-587-3372 8560 Holcomb Bridge Rd. Suite 115 Alpharetta, GA 30022

Hawaii Honolulu: 808-841-9876 1311 Kalani Street Honolulu, HI 96817

Toledo: 419-389-0560 5311 Airport Highway Toledo, OH 43615

Oklahoma Oklahoma City: 405-748-8844 9301 N. May Avenue Oklahoma City, OK 73120

Tulsa: 918-384-0100 5511 E. 41st Street Tulsa, OK 74135

Oregon Eugene: 541-685-0677 Sheldon Plaza Shop. Cntr. 1530 Coburg Road Eugene, OR 97401

Portland/Tigard: 503-684-1428 12020 So.W. Main Street Tigard, OR 97223

Pennsylvania Allentown: 610-351-2966 Parkway Shopping Center 1543 Lehigh Street Allentown, PA 18103

Harrisburg: 717-939-6770 777 Eisenhower Blvd. Harrisburg, PA 17111

Philadelphia/ Downingtown: 610-873-5660 417 Boot Road Downingtown, PA 19335

Rhode Island Providence/ East Greenwich: 401-886-1175 East Greenwich Square 1000 Division Street East Greenwich, RI 02818

South Carolina Greenville:

864-627-8760 1327 Miller Road Greenville, SC 29607

RobustToolRestsDesigned by woodturners for woodturners, Robust Tool Rests feature a welded hardened steel rod across the top of the rest. This provides a smooth working surface that allows the tool to glide effortlessly along the rest that will not nick, ding or ever need filing. The original Comfort Rest’s natural curvature lends itself to overhand or underhand style grips. The Low Profile and Mini Rests were designed for smaller lathes that will not accommodate tall cross bar style rests. The interior curved rest, designed to fit most 16" – 18" lathes with a 1" post, works well when turning bowls and platters.843795 4" mini rest 5/8" post ..................................................................$49.99843796 6" mini rest 5/8" post ..................................................................$53.99843797 (A) 9" mini rest 5/8" post ............................................................$59.99847002 (B) 9" low profile rest 1" post ....................................................$59.99847003 12" low profile rest 1" post ........................................................$69.99836623 (C) 9" comfort rest 1" post ........................................................$59.99836624 12" comfort rest 1" post ............................................................$69.99836627 (D) interior curved rest 1" post .................................................$99.99

A B

C DNow Available At Woodcraft!$8999

Bosch41/2"PaddleSwitchAngleGrinderThe Bosch 1810PS Has The Power And Performance Needed For Any Power Carving Applications That Specify A 41/2" Angle Grinder. • Paddle Switch With Lock-On Mechanism For Better Operator Comfort And Control• Amperage: 8.0; No Load RPM: 11,000• Spindle Thread: 5/8" - 11• Includes: Multi-Position Guard, Vibration Control Auxiliary Handle, Flange Kit, Spanner Wrench & Abrasive Wheel835918

New Products


Woodcraft’sGuaranteeWe’re absolutely confident that you’ll be satisfied with your purchase from Woodcraft! If you’re not, return it anytime within 90 days, and we will gladly replace the product, give you credit, or refund your money, whichever you prefer. Woodcraft's Guarantee does not apply to power tools, which are subject only to manufacturer's warranties. Special-order items or manufacturer drop-ships are subject to a 25% restocking fee.OrderingByMailIf an order form is not included in this catalog simply list the quantity, stock number, description and price of the items you're ordering on a piece of paper. Total them up, add shipping & handling ($0-$10 = $5.99, $10.01 to $30 = $7.50, $30.01 to $50 = $8.99, $50.01 to $100 = $9.99, $100.01 to $160 = $10.99, $160.01 to $200 = $15.99 and + $200 or more = $19.99) and any applicable state taxes. Give us your current mailing address and telephone number. If paying by credit card, include the card number, expiration date and issuer's name (Visa, MC, etc.). For C.O.D. orders, please add an additional $9.00 to your order total. Please do not address orders to our stores. For faster delivery see Rush Shipping. Shipments outside the contiguous US are charged actual shipping expenses. OrderingByTelephoneOrder toll-free by calling 800 225-1153 from 8:00am to 12 midnight EST Monday-Friday and 8:30am to 5:00pm on weekends. If for some reason you can't reach us on our 800 numbers, call 1-304-428-4866.OrderingByFAXComplete our order form and then FAX it to us at 1-304-428-8271.OrderingOnTheInternetVisit us at www.woodcraft.com! You can place your order online, check its current status and track your shipment. Tracking and account info is available even if you ordered by phone or mail!ShopAtOurStoresWoodcraft Stores are located in most major US cities! Visit www.woodcraft.com to find the location nearest you. OrderingQuestions? email: [email protected] call our Customer Service Dept. at 800 535-4482 from 8:30am to 5:00pm EST, Mon.-Fri., or write to: Woodcraft, c/o Customer Service Dept. TechnicalQuestions? email: [email protected] more information on any of our products? Call our Technical Service Dept. at 800 535-4486 from 8:30am to 9pm EST, Monday-Friday.PricingWoodcraft’s goal is to maintain the published prices in this catalog for the period of time shown. However, due to unanticipated changes and/or typographical errors pricing may increase, or decrease, without notice. To obtain current pricing prior to ordering please visit www.woodcraft.com or call 800 225-1153. Retail store pricing may vary from the Internet or Catalog pricing.Returns/Exchanges&SharpeningorEngravingServiceIf, for any reason, you are not satisfied with a product (except for power tools, which are covered only by the manufacturer's warranty) please return it within 90 days with our packing slip (noting the reason for your return on the back) and ship to: WoodcraftSupply,LLC 406AirportIndustrialPark Parkersburg,WV26104-9778 Please ship your return prepaid by FedEx Ground, UPS or Insured Parcel Post. Returns will be refunded in full, including shipping and return postage (at FedEx, UPS or Parcel Post ground rates only). Product purchased on woodcraft.com that is shipped directly from the manufac-turer is covered by the manufacturer's warranty, which supercedes any offered by Woodcraft. Returns of direct shipped items can be made anytime within 90 days of purchase, subject to the terms of the manufacturer's warranty, and a 25% restocking fee. For details, click on the “Ships Direct From Manufacturer” link on the specific product page at woodcraft.com. Items for Sharpening or Engraving services may also be sent to the preceding address.

WoodcraftExpressShippingIn-stock orders received by 12 Noon EST Monday through Friday can be air shipped that same day. If you order Friday before 12 Noon EST, a FedEx Priority Overnight package will arrive on Monday. If you order Friday after 12 Noon EST, a FedEx Priority Overnight package will ship on Monday and arrive on Tuesday. Woodcraft does not ship on Saturday, Sunday, or these holidays: New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Eve and Christmas Day. Standard shipping delivers Monday through Saturday. FedEx Commercial delivers Monday through Friday. FedEx 2Day and FedEx Priority Overnight only deliver Monday through Friday. Orders being shipped to AK, HI and any of the territories or possessions of the USA are shipped by standard shipping. Please contact our Customer Service Dept. for more information on Second Day Air or Priority Mail shipping charges.FreightShipments Items over 100 pounds in weight, or of an unusual size, must be shipped by common carrier. These are charged an additional amount over our standard Shipping & Handling charge to help cover this expense. This charge is for standard commercial delivery and is always identified in the product's copy. If the ship-ment is to a residence or if lift gate service is required, additional fees may be charged by the freight company. Truck shipments are tail gate deliveries. The driver will not take the item off the truck; that is your responsibility. Woodcraft's Customer Service Dept. will gladly contact the freight company that services your area and prepare an estimate prior to completing your order. Shipments outside the contiguous US are charged actual shipping expenses.I'm in a hurry. Can you ship overnight?Yes. During the checkout process you'll have the option of choosing standard shipping, FedEx 2Day or FedEx Priority Overnight Shipping. FedEx 2Day and FedEx Priority Overnight rates are based on the weight of your order and the number of packages. FedEx 2Day is your best bet if you don't need your order the very next day. FedEx 2Day rates begin with a minimum charge of $15 and then match FedEx published rates. FedEx Priority Overnight charges begin with a minimum of $19 and match FedEx published rates. Flammable or hazardous items cannot be shipped by air. If your order contains a flammable item the entire order will be sent by ground.D/S=DropShipDirectfromManufacturerYour in-stock order will be shipped from the manufacturer to your doorstep! All Direct from Manufacturer items ship by ground to the 48 contiguous states. Items cannot ship to Alaska or Hawaii, PO Boxes, APO addresses or any of the US Territories. Express and overnight shipping are not available for these products.Manufacturer’sWarranty: Because these items are purchased and shipped directly from the manufacturers, their warranties supersede any offered by Woodcraft. NonUSOrdersWe accept US funds only, and for your convenience we recommend you use a credit card or bank money order. Personal checks or money orders are not accepted unless drawn on a US bank. Canadian shipments will be charged an additional $6 for postage, most orders are shipped by air. Orders being shipped outside of the USA and Canada are shipped by the carrier of your choice. Our Customer Service Dept. will contact with you a number of options (land, sea and air) and the cost prior to processing your order. Taxes and duty are your responsibility and are not included in our quotes. Visit us online for Canadian pricing including duties and taxes. Products marked "Ships Direct from Manufacturer" can not be shipped outside the US.MailPreferenceWe occasionally make our customer list available to carefully screened companies whose products may interest you. If you prefer not to receive their mailings, please let us know. When contacting us, enclose your mailing label.NOTE: California's Proposition 65 entitles California consumers to special warn-ings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. As such, where applicable, a warning will be included on products sold in the state of California.

Ordering InformationOrders Received By 12 Noon EST Are Shipped The Same Day!

Texas Austin: 512-407-8787 8904 Research Blvd. Austin, TX 78758

Dallas/Addison: 972-241-0701 Brookhaven Village Shopping Center 14380 Marsh Lane Addison, TX 75001

Fort Worth: 817-569-0777 2400 Lands End Blvd. IH 30 @ Green Oaks Road Fort Worth, TX 76116

Houston North: 281-880-0045 Cypress Station Square 60 FM 1960 West Houston, TX 77090

Houston Southwest: 281-988-9449 11707 West Sam Houston Parkway South Houston, TX 77031

San Antonio: 210-545-5885 13719 San Pedro San Antonio, TX 78232

Utah Salt Lake City/ South Jordan: 801-566-5652 Pheasant Hollow Bus. Park 4 9891 South 500 West Sandy, UT 84070

Virginia Leesburg:

703-737-7880 Leesburg Plaza 512 East Market Leesburg, VA 20176

Norfolk: 757-466-1166 Shops at Janaf, Suite 152 5802 East Va. Beach Blvd. Norfolk, VA 23502

Richmond: 804-355-3945 9862 West Broad Street Glen Allen, VA 23060

Roanoke: 540-366-7144 1445 Towne Square Blvd. Roanoke, VA 24012

Springfield: 703-912-6727 Concord Shopping Center 6123B Backlick Rd & Commerce St. Springfield, VA 22150

Washington Seattle: 206-767-6394 5963 Corson Ave, Ste. 120 Seattle, WA 98108

Spokane:509-892-9663

212 N. Sullivan Rd. Ste. C Spokane Valley, WA 99037

West Virginia Parkersburg: 304-485-4050 4420 Emerson Avenue Parkersburg, WV 26104

Wisconsin Appleton/Fox Cities: 920-730-9663 4731 Michael's Drive Appleton, WI 54913

Madison: 608-273-8868 146 Westgate Mall Madison, WI 53711

Milwaukee/New Berlin: 262-785-6770 14115 West Greenfield Ave. New Berlin, WI 53151

Tennessee Chattanooga: 423-826-0163 1414 Jenkins Road Chattanooga, TN 37421 Johnson City: 423-282-9973 2913 Boones Creek Road Johnson City, TN 37615

Knoxville: 865-539-9330 8023 Kingston Pike Knoxville, TN 37919

Nashville: 615-599-9638 209 South Royal Oaks Blvd. Suite #164 Franklin, TN 37064

60A60 2 Product Name 10 small $00.00 $00.00

Shipping & Handling Charges:Orders up to: $0 - $10 ..................................... $5.99Orders from: $10.01 to $30 ............................$7.50Orders from: $30.01 to $50 ..........................$8.99Orders from: $50.01 to $100 ........................ $9.99Orders from: $100.01 to $160 ....................$10.99Orders from: $160.01 to $200 ....................$15.99Orders above: $200.01 or more ....................$19.99Foreign Orders - See Ordering Information on page 163.

Qty. Price EachSize or StylePage Total PriceStock Number Name of Product

MethodofPayment: U.S. Funds Only Visa MasterCard Discover Optima American Express Check or Money Order (Do not send cash) C.O.D. - Please add an additional $9.00 to your order.

Questions? See Ordering Information on page 163.Card Expires

Signature

Card Number

Woodcraft Express ShippingAllinstockordersreceivedby12NoonESTareshippedoutthatsameday!Our huge inventory and sophisticated picking and packing system allows us to ship faster than any other woodworking tool catalog. Our shipping and handling charge covers all regular postage charges for your order regardless of how many packages it's shipped in. All orders are fully insured by Woodcraft against loss or damage. If a problem does occur, contact us immediately.

Orders being shipped to AK, HI and any of the territories or possessions of the USA are shipped by standard US Postal mail. Please contact our Customer Service Dept. for more information on FedEx 2Day or Priority Overnight shipping.

FreightShipmentsItems over 100 pounds in weight, or of an unusual size, must be shipped by common carrier. These are charged an additional amount over our regular Shipping & Handling charge to help cover this expense. This charge is for standard commercial delivery and is always identified in the product's copy. If the shipment is to a residence or if lift gate service is required, additional fees may be charged by the freight company. Truck shipments are tail gate deliveries. The driver will not take the item off the truck, that is your responsibility. Woodcraft's Customer Service Dept. will gladly contact the freight company that services your area and prepare an estimate prior to completing your order. Shipments outside the contiguous US are charged actual shipping expenses.

FaxYourOrder1-304-428-8271

OrderToll-Free800225-1153Operatorsavailable8:00AM-12MidnightEST,M-F

8:30AM-5:00PMWeekends.For Customer Service call 800 535-4482 from 8:30AM to 5PM, M-F.

email: [email protected] Technical Advice call 800 535-4486 from 8:30AM to 9PM, M-F.

email: [email protected]

Name

Street

City State Zip

Gift Card Message

From

Ship to: If different than ordered by. Please print.

Subtotal

RushShipping See page 163.

Shipping&Handling See chart to the left.

SalesTax See chart

CanadianOrders Add $6.00 for additional postage.

GrandTotal

OrderedBy:

Woodcraft Supply, LLCP.O. Box 1686Parkersburg, WV 26102-1686

In case we have a question about your order.

We'll email you when your order is picked and shipped. You can check delivery progress online.

Name Please print

Address

City State Zip

DaytimePhoneNo.

EmailAddress

Please copy numbers from the address panel on back page and fill in:Customer Number & Key Code

164

Woodcraft is a member of the Direct Marketing Association and follows best industry practices in regards to mailing list maintenance and consumer privacy.

Sales Tax We are required by law to collect sales tax in certain states because of our retail presence. For orders shipped to any of the following states, add general state sales tax listed plus any additional county or local sales tax: MA 6.25% NC 5.75% NY*4 - 8.875% RI 7% VA 4% WV 6% *Depending on Jurisdiction

Card Verification Code

WOODCRAFT GIFT CARDNot sure what to get the woodworker in your life? Give them the freedom to get just the tools they want.Availableinanydollaramount!

To order, call 800-225-1153, visit woodcraft.com or your local woodcraft store.

For These Services, Contact Customer Service 800 535-4482 from 8:30AM to 5PM, M-F.

email: [email protected]

New Products


INDEX

165

AAbrasives ....... 2A, 2C, 6, 9, 10, 71, 82, 83-85, 102, 107-111, 144, 155, 161, 162ACCURIDE ................................125-127Adhesives 2D, 110-113, 146, 155, 157 Adze ...................................................99Air Filtration......................... 6, 15, 166Air Tools ..................11, 156, 158, 166 AllNewProducts 2-2H,152-162,166Aprons ............................16, 39, 70, 74Arbors ............................................. 121Arkansas Stones ..............................36Awl ..................................................... 2B

BBacksaws ..........................................51Bandsaw Accessories ......................... .............................6, 19, 20, 24, 54, 55 Bandsaw Blades ........................54, 55Bandsaws ....................................6, 7, 9Belt/Disc Sanders .......... 2E, 6, 9, 166Bench Brush .....................................14Bench Chisels ............................ 66, 67Bench Dogs ............................... 48, 49Bench Hold Fasts .............................42Benches ........................2D, 26, 48-50Benchtops ........................................ 50BESSEY Clamps .........................45, 46Biscuit/Domino Joiners .....................4Bits, Drill ................................................ 6, 55, 56, 58, 61, 122, 129, 131, 153Bits, Router ........................................... ..2H, 8, 32, 33, 34-38, 136, 160, 166Bit/Blade Cleaner ........28, 38, 41, 42BLUM .............................. 122, 127-128Books ..........................2G, 90, 91, 134 Brad Point Bits .........................61, 121Branding Irons ..................................41Brushes, Finish .............................. 119Buffing Compound ..................82, 144Buffing Wheels.................. 70, 82, 144Burnishers ............................. 108, 155Burrs, Carving ................ 2G, 104, 105

CCA Glue ........................................... 112Cabinet Scrapers ..................... 65, 107Calipers ................... 2D, 74, 75, 79, 81Caning Supplies ............................. 133Carving .. 2C, 2G, 87, 91-102, 107, 158Carving Burrs ................. 2G, 104, 105Carving Discs ............... 102, 104, 158Casters ................................... 6, 27, 39Centering Tools ...........2D, 71, 80, 153Ceramic Stones ............................... 88Chainsaws ...........................................8Chip Carving ................90, 91, 99, 101Chisels ..2B, 2C, 6, 25, 65, 66-67,103Chucks, Lathe ..........................7, 76, 77Circle Cutters ................................... 60Clamps ........................................ 19, 27, 43-47, 48, 57, 58, 144, 146, 152, 158 ClockSupplies ..............131-133, 153 Corner Chisels ................................. 66Countersinks ............................55, 129

DDado Blades .....................52, 53, 153DELTA Tools ............................ 7, 15, 25Depth Gauges ............................18, 80DeWALT Tools ..............................7, 166Diamond Burrs........................ 2G, 104Diamond Stones ........................84, 85Dividers, Wing ......................2D, 75, 78Dovetail Bits ................................31, 37Dovetail Jigs ....................... 30, 31, 32Dowel Centers ................................. 58Dowel Pins/Rods .............. 58, 60, 147Doweling Jigs/Supplies ....................... ................................. 30, 31, 58, 60-62 Draw Knives .............................99, 101Drawer Slides ................123, 124, 127Drills, Cordless ...................................8Drill Bits ................................................. 6, 55, 56, 58, 61, 122, 129, 131, 153Drill Press ........................................6, 7Drill Press Accessories ........................ .................. 18, 19, 20, 25, 27, 44, 152 Drilling Guides/Jigs .............................. ................ 57-59, 61, 62, 68, 128, 153Driver Bits ...................................... 129

Router Guides/Bushings ...2G, 28, 29 Router Lifts ................................2H, 32Router Pad ........................................28Router Speed Control ...............2H, 28Router Tables/Fences & Inserts ......... .............................. 2H, 20, 29, 32, 153Routers ................. 2H, 3, 7, 8, 10, 166 Rulers ....................................2E, 79-81Rust Preventer ...........................38, 42

SSafety .................................................... 2D, 15-16, 17, 21, 73, 101, 113, 154 Sanders ................................................. ...........2E, 3, 5-7, 9, 10, 102, 104, 111Sanding Drums ................. 6, 109, 110Sanding Supplies ............. 2E, 5, 6, 21, 71, 102, 104, 107-111, 144, 155, 161 Saw Blades .......... 8, 52-55, 153, 166 Saws .....4, 8, 50, 51-54,65, 68, 152Scraping&Sanding ............................. .......... 72, 73, 101, 107, 108-110,155Screwdrivers ..............................2C, 40Screws ..2, 57, 58, 119, 129-131, 159Scrollsaws ............................ 7, 10, 166Shaker Pegs & Knobs ................... 136Sharpening ........................................... ........ 2A, 2C, 25, 82, 83-90, 108, 158 Sharpening Jigs/Guides....................... .........................69, 82-85, 89, 90, 108 SharpeningService ........................ 89Shavehooks ................................... 108 Shelf Drilling Jig .........................61, 62Shelf Supports ........................40, 124ShopAccessories ................................ ........2D, 2E, 2H, 5, 16, 23, 26, 27, 38, 39-42,119, 152, 153, 155, 157, 158Slipstones .................................. 86, 87Spindle Sanders .................................6Spokeshaves ......................2B, 63, 64Squares ................44, 79, 81, 82, 155Stains ...............................2D, 113, 115Strops ............................................... 88 Swiss Tools ............................................ ............... 2C, 67, 78, 91-100, 102, 108Swivel, TV/Chair ............................. 124

TTable Leg Braces ........................... 123Table Saw Accessories ........................ ....................... 7, 16-23, 25-27, 81, 152Table Saws ............................. 6, 7, 152 Table Slides .................................... 123Tape Measures ................................ 80Tenoning ..............4, 30, 31, 56, 58, 63 TimberFraming .........................65, 66 Tool Chest .........................................39Tool Bag/Rolls/Pouches ...67, 90, 159Tung Oil ........................................... 115Turning Tools ...................... 69-75, 159 Twist Bits ...................... 6, 55, 56, 129

VVeneer Supplies/Veneers ...... 146-148Vise Hardware ................................... 47 Vises&Clamps .................................... 43-47,48, 57,58, 144, 146, 152, 158

WWatco Oil ............................... 115, 156Water Stones .......................84, 87, 88Waxes ..............................................117Weather Instruments ........... 132, 133WHITESIDE Router Bits ........................ ........................ 2H, 28, 31, 36-38, 136WIXEY....................................18, 79, 81 Wood ..................................................... 2F, 2G, 134, 135, 143, 146-151,160 Woodboring .......................................... ................6, 25, 55-62,127, 129, 153Woodburning ......................... 105, 106WoodRiver® .................................... 2B, 2H, 6, 11, 19, 25, 26, 30, 31, 33, 38, 39, 42, 44, 46, 47, 52, 54, 59, 62, 63, 65, 67, 69, 73, 75-78, 80-82, 88, 107, 110, 118, 134, 152, 154, 155, 159Woodthreading .................................61 Woodturning ........................................ 2D, 2F, 69-77,135-145, 153, 159-162Workbench Hardware 2E, 4, 42, 47-49 Workbenches ...............2D, 26, 48-50

Lamp, Magnifying ..................... 43, 90 Lancelot Carving Discs ........ 102, 158Laser Engraving ................................42Lathe Accessories ................................ ...................... 6, 7, 9, 69-71, 73-77, 162Lathe Chucks ........................... 7, 75-77Lathe Tools 69, 70, 71, 73-77, 159, 162Lathes ..........................................6, 7, 9Lazy Susan Bearings ..................... 124LEIGH Jigs/Hold Down ........ 30, 31, 48Lid Supports...........................124, 127Lighting .................................25, 41, 42Live Centers ................................75, 76Locks .............................................. 119Lumber Racks ......................... 40, 153

MMAGSWITCH .......................17, 20, 152Mallets ...........................2C, 41, 90, 91Marking&Measuring .......................... ..........2C, 2E, 18, 69, 127, 78-82,155 Mechanical Clock Movements ..............................................................131-133Metal Detectors ............................... 40Micro Carving Tools .......................... 71 Mirrors ............................................ 133 Miter Gauges ...................6, 10, 19, 27 Miter Saw .................................4, 8, 51Mobile Bases ...........................26, 152Moisture Meters ...............................39 Mortisers ......................6, 7, 10, 25, 31Mortising Attachment/Jig .................... .........................................10, 25, 29-31 Mortising Bits............................... 6, 25Mortising Chisels ......................... 6, 25 MULTIMASTER ............................. 2A, 5Multi-spur Bits ...................... 104, 105

NNailers ......................................11, 158NOVA Tools ....................................9, 76

OOil Stones ...................................86, 90ONEIDA Air Systems .........................14OrderingInformation ....................163OrderForm .....................................164

PPalm Carving Tools ...........2C, 91, 100PenKits ................ 137-145,160, 161PictureFraming............................... 43 PINNACLE® Tools .................................... ........................... 18, 39, 40, 44, 46, 48, 63, 64, 67, 70, 74, 79, 81, 82, 86, 155Planers ............................................4, 7Planes.....................2B, 62, 63-64, 65Plane Blades ..............................63, 64Plans .....................2, 2E, 2G, 131, 159 Plug Cutters ...............................56, 60Plunge Routers ........ 2H, 3, 8, 10, 166Plywood .......................................... 146Pneumatics .......... 11,156, 158, 166Pocket Hole Guides .............57, 58, 60 PORTER-CABLE Tools ...2H, 10, 31, 60PowerCarving ...................................... ................... 2G, 8, 102, 103-105,158PowerToolAccessories ...................... .... 2A, 2E, 2H, 3-11, 16, 17-27,43, 44, 81, 82, 152, 153, 156, 158, 162, 166PowerTools .......................2A, 2E, 2H, 3-10,82, 102, 118, 156, 158, 162, 166POWERMATIC Tools ............................7ProjectSupplies ................................... ...2E, 118, 134-136,155, 157, 159-161 Push Blocks/Sticks ....................16, 17

QQuartz Clocks ....................... 131, 133

RRasps & Rifflers ............ 106, 107, 155Respirators .......................2D, 15, 154RIKON Tools ...............................9, 166Roller Stands .............................25, 26Rosette Cutters ............................... 60Rotary Tools ............................102-104 RouterAccessories....................... 2G, 2H, 7, 8, 10, 16, 19, 22, 27, 28-32,153 RouterBits ............................................ ....2H, 8, 29, 32, 33, 34-38,136, 166

Drum Sanders ..........................6, 9, 10DustCollection .................................... ...... 2E, 3, 5, 6-10, 12-14, 15, 20, 154 Dust Collector Fittings & Acc .............. ... 2E, 3, 5, 6, 10, 12-14, 20, 104, 154Dust Collectors/Extractors ................. ...... 3, 5, 6, 10, 14, 15, 104, 154, 166Dyes/Tints ..................... 114, 116, 117DVD ........................................................ 2G, 68, 118, 136, 144, 151, 156, 157

EEngraved Nameplates ............42, 153Epoxy ...............................2D, 111, 112

FFace Shields ......................................16Fasteners 57, 58, 123, 130,131, 152 Featherboards ................... 17, 31, 152FEIN Tools ..................................... 2A, 5 FESTOOL ....................................2E, 3-5Files&Rasps..................88, 106-107 Finishing ................................................ ...............2D, 113-118,119, 156-158Flexible Shaft Tools ....................... 103 Flocking .......................................... 115Floor Mats ........................................ 38FOREDOM Power Carvers ............. 103FORREST Saw Blades .............52, 153Forstner Bits ......................................... ............2H, 59, 60, 121, 131-133, 153Fret Saws ...........................................52FREUD ......................... 34, 35, 53, 166Froe ................................................... 65

GGENERAL Tools ................... 10, 26, 69Gift Card ......................................... 164Gloves ..............................16, 101, 113Glue........................................................ 2D, 110, 111-112, 113, 146, 155, 157 Gouges, Carving ....2C, 69-73, 90-100GREX Air Tools .........................11, 158Grinders ..... 82-84, 89, 104, 109, 162 Grinding Wheels .. 82, 83, 84, 89, 162

HHammers .......................................... 66Handsaws ..................... 50, 51, 65, 68Handscrews ..................................... 46Hand Tool Mastery .......................... 68Hardware ............... 22, 119-129,152 HIGHPOINT×® Fasteners ...129-131, 152Hinge Drilling Bits ..55, 122, 128, 129 Hinges .......... 119-122, 124, 128, 129Honing Compound ..............2D, 82, 88Honing Guides ...........................82, 85HVLP Sprayers ..................... 118, 156

IINCRA Tools & Acc. ......19, 22, 23, 26 Inlay Tools/Materials .... 38, 140, 146Instant/CA Glue ............................. 112

JJapanese Tools ...........50, 51, 66, 107 Japanese Waterstones ....................87JDS Products.....................................15 JET Tools .............................. 6, 15, 158 Jewelry Box Hardware .......... 119, 120Jig Saws ........................................ 2E, 3Jigs & Fixture Hardware ....................... ...............2E, 17, 20-23, 27, 28, 31, 32, 57, 58, 60-62, 68, 84, 122, 152, 153 Jointer/Planer Knife Jig ............ 2E, 25Jointers .......................................... 7, 10

KKits ...........2F, 131, 134-145, 159-161Knives .................................................... .....90, 91, 95, 99-102, 134, 159, 161Knives, Carving 2C 90, 91, 95, 99-101Knives, Draw ............................99, 101Knives, Chip Carving ............................ ............................... 2F, 90, 91, 99, 101Knives, Marking ......................... 2C, 78KREG Tools ............................................ 2H, 17-20, 24, 27, 32, 48, 57, 58, 127

LLamp, Magnetic Base ........ 25, 42, 43


406 Airport Industrial ParkP.O. Box 1686Parkersburg, WV 26102-1686

PRSRTSTDUSPOSTAGE

PAIDWOODCRAFTSUPPLY,LLC

Sale

Catalogitemswiththislogocanbelaserengraved.

FREE• Spend$39999-$99999&Receive A$25WoodcraftGiftCard*• SpendOver$1,000&Receive A$50WoodcraftGiftCard*$50

WoodcraftGiftCardWhenYouBuy

RikonPowerTools&Accessories!

*Pre-tax total. See store for details. FREE Woodcraft Gift Card cannot be used towards qualifying purchase.

Rebates$20&$30Mail-InRebatesFor

Porter-Cable&DeWaltRouters! Manufacturer’s Mail-In Rebates:

See Store For Details – Excludes PC 690LR 143163

Friday & Saturday, May 13 & 14!

15% Off All Saw Blades & Router Bits!

$54999 FREE Stand & Light– $12998 Value!*

DeWALT20"Heavy-DutyVariable-SpeedScrollsaw• 1.3 Amp, 400 - 1750 Strokes Per Min.• 20" Throat• Oversize Cast-Iron Table• Capacity Of 2" Thick Stock At 90°• Tool-Free Blade Change System127233 ................... DW788 reg. $549.99813079 ......................Stand $89.99Value!813083 .............Work Light $39.99Value!*FREE 813079 & 813083 With Purchase Of 127233.

$12999 Introductory Offer!Bostitch1.2Gal.HighOutputCompressor• High-Output Oil-Free Pump Delivers 2.8 CFM @ 90 PSI And 150 PSI Max Working Pressure• 1.2 Gallon, 1.5 HP Running Motor Draws Only 12 Amps For Easy Start-Up• Weighs Only 23.5 lbs.• Extremely Small Cube Design For Easy Portability• LED On/Off Switch Lets You Know The Compressor Is On To Reduce Low-Pressure Misfires152918 • reg. $139.99

$26999Rikon3-SpeedAirCleanerWithRemote• 3 Speeds: 480CFM, 750CFM, 950CFM• 5 Micron Outer Filter/1 Micron Inner Filter• Accepts Standard 12" x 24" Filter • Remote Control Has A Built-In Timer With 2-, 4- & 8-Hour Settings• 5-Year Warranty152919 • reg. $349.99

Introductory Offer!$15999 FREE 7310 Laminate Trimmer– $9999 Value!* Porter-Cable13/4HP690LRRouterIncludes Router Motor, Fixed Base, 1/4" & 1/2" Collets, Collet Wrenches & Manual143163 • Model 690LR • reg. $159.99Laminate Trimmer85K14• Model 7310 • $99.99Value–FREE!*FREE 85K14 With Purchase Of 143163

Documents

W 1CR