Upload
vuthu
View
230
Download
1
Embed Size (px)
Citation preview
VX410 and VX410a Introduction and Features
Congratulations on purchasing the VX410 or VX410a bass enclosure by Hartke!Continuing Larry Hartke’s legendary commitment to bass players, the VX “VeryExtreme” Series enclosures have been designed to provide excellent tone with awarm punchy output. The VX410 and VX410a features four 10” proprietary lowfrequency drivers with specially treated cones impregnated fabric surrounds,matched convex dust covers all mounted in a heavy duty steel frame. Roundingout the tone is a proprietary horn loaded 1” titanium compression driver, TheVX410a features and angled enclosure projecting the sound trwards the playerwhile the VX410 features a traditional straight enclosure. Together the make aausome stack. Using heavy-duty plywood construction covered in rugged carpetwith recessed jack plate and ergonomic handle, the VX410 and VX410a will pro-vide reliable performance from gig to gig and venue to venue.
In these pages, you’ll find a detailed description of the features of the VX410, aswell a description of its front and rear panels, step-by-step instructions for itssetup and use, and full specifications. You’ll also find a warranty cardenclosed—please don’t forget to fill it out and mail it in so that you can receiveonline technical support and so we can send you updated information aboutthese and other Samson products in the future.
We recommend you record your serial number in the space provided below forfuture reference.
Serial number: _______________________________________
Date of purchase: _______________________________________
Should your unit ever require servicing, a Return Authorization number (RA)must be obtained before shipping your unit to Samson. Without this number, theunit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Pleaseretain the original packing materials and if possible, return the unit in the origi-nal carton and packing materials.
VX410 and VX410a Features
• 4 x 10 Inch heavy-duty Low
Frequency drivers
• 1” titanium compression driver
• 3/4" Plywood construction
• Tuned Rear Port
• Perforated metal speaker grill
• Recessed handles
• Stacking corners
• Dual, parallel wired 1/4" jacks.
• Covered in durable carpet seriesVX115 BASS
About ImpedanceBefore you hook up your speaker cabinet be sure that you understand a little aboutimpedance. Impedance is the electronic load that the speaker puts on the power amplifierand is measured in Ohms.
Here is the tricky, yet simple rule of impedance; When two speakers are wired in "Parallel"the total impedance is cut in half andwhen two speakers are wire is “Series”the total impedance is the sum of thespeakers individual impedance.
The VX410 and VX410a’s impedance(many audio guys used the made upword “ohmage”, however the correctterm is impedance) is 8 Ohms. So,when two VX410’sor VX410a’s are con-nected together in parallel the totalimpedance is 4 Ohms. The impedanceof your speaker also has an effect onyou amplifier. In general, the lower theimpedance the more power your ampli-fier will put out.
IMPORTANT: There is an minimum safeimpedance so be sure to check themanufacturer’s recommended imped-ance for your amplifier to avoid anydamage to your amplifier or voidingyour warranty.
Connecting the VX410 to Your AmplifierThe VX410 and VX410a connectionsare made via 1/4” phone jacks locatedon the rear panel jack-plate. Be sure tomake your connection with un-shieldedspeaker cable. Connect the AmplifierOutput to the speaker Input on theVX410’s rear jackplate.
Using the EXTENSION OutputThe VX410and VX410a provides aconvenient Extension Output for con-necting additional speaker cabinets inparallel. Be sure to read the sectionabove on impedance to insure a properhook up with your amplifier. Follow thesteps below to connect two VX410’susing the Extension Output. Connectthe Amplifier Output to the Input of thefirst VX410. Now, connect theExtension Output to the Input of thesecond VX410 or VX410a.
Hartke
EXTENSION
INPUTS
MADE IN CHINASERIAL NUMBER
-series
Hartke Systems Distributed worldwide by Samson Technologies
www.hartke.com
VX410 BASS CABINET400 WATTS
Hartke SystemsDistributed Exclusively bySamson Technologies Corp.Hicksville, New York 11802
MODEL 2000200 WATTS
8
= 120 WATTS4
= 200 WATTS
CAUTIONTO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K.SERIAL NUMBER
115
~ AC INPUT115V/230V 50/60Hz
FUSE5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUTPUTS
88ON OFF
HPF
EFFECT
SENDRETUIRN
8
Connecting the VX410 and VX410a
Hartke
EXTENSION
INPUTS
MADE IN CHINASERIAL NUMBER
-series
Hartke Systems Distributed worldwide by Samson Technologies
www.hartke.com
VX410 BASS CABINET400 WATTS
8
8
Hartke
EXTENSION
INPUTS
MADE IN CHINASERIAL NUMBER
-series
Hartke Systems Distributed worldwide by Samson Technologies
www.hartke.com
VX410 BASS CABINET400 WATTS
Hartke SystemsDistributed Exclusively bySamson Technologies Corp.Hicksville, New York 11802
MODEL 2000200 WATTS
8
= 120 WATTS4
= 200 WATTS
CAUTIONTO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K.SERIAL NUMBER
115
~ AC INPUT115V/230V 50/60Hz
FUSE5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUTPUTS
88ON OFF
HPF
EFFECT
SENDRETUIRN
Type Bass speaker enclosure
Impedance (Ohms) 8 Ohms Impedance
Power Handling 400 Watts Peak Power Handling
Low Frequency Drivers 4-10″ Special Design 8 ohm, 100wattSpeakers,
High Frequency Driver 1″ Throat Compression Driver
Dimensions Height:25″ (62.2 cm)Width: 25″ (62.2 cm)Depth: 15″ (47.0 cm)
WeightVX410 72 lbs. (32.6 kg)VX410a 70 lbs. (31.68 kg)
Specifications subject to change without notice.
VX410 and VX410a Specifications
Distributed Worldwide Exclusively by:Samson Technologies Corp.
575 Underhill Blvd.P.O. Box 9031
Syosset, NY 11791-9031Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888www.samsontech.com
Hartke