STUDENT: MIRANDA BAYRON OMAR GABRIELID: 4914894

1. Saw a piece of Wood righteously2. Hit the wood using a mallet and chisel, chisel to fit parts.3. Plane the surface of wood to eliminate protuberances, to have stability use the vise.4. Finally, sand all the surfaces whit the sandpaper to remove splinters.

1. Use the spirit level to make holes in the Wall, ensure that they are perpendicular to the ground.

2. Drill holes in the concrete of the wall.3. Push the rawlplugs in the wall holes.4. Using a screwdriver, put the screw on the bracket, tighten against the wall.

STUDENT: MIRANDA BAYRON OMAR GABRIELID: 4914894

1. For change a punctured tyre, put the jack under the car, then push to lift the car.2. Loosen the nuts using the correct spanner.3. Pull the tyre of the wheel, but first open the tyre cavity with tyre levers.4. After the steps above, and put the tyre in the wheel, tighten the wheel nuts in the car axle

using the wheel brace.