VuSafeTM LLC VuSafe™ Measuring Instructions€¦ · The FH dimension is critical. The factory will use this dimension paired with the selected Attachment Code to determine the cut

A2H

U

A2

A1

Window Dimensions

Door Dimensions

Opening Width

Trim Casing Width(if applicable)

Trim Casing Width(if applicable)

OpeningWidthA1

VuSafe™ Measuring Instructions

VS_worksheet10042011 Copyright © 2011 VuSafe Industries, LLC. All Rights Reserved www.vusafe.com 800-522-1599

uSafe Industries, LLCV TM

th gieH gninep

O

t hgieH gnisa

C mir

T)elbacilppa fi(

gninepO

thgieH

thg i eH gn is a

C m ir

T)elbaci lppa fi(

Our VuSafe system is formatted to enable you to clearly determine the attachment style and assign a code for any mounting condition.

Attachment Codes are indicated along with a visual representation and a red arrow defining the measure points for ‘Finished Height’

The ‘Finished Height’ (FH) dimension is a ‘tip to tip’ dimension from the top of the header channel or direct mount attachment point to the bottom of the sill channel or direct mount attachment point.

The FH dimension is critical. The factory will use this dimension paired with the selected Attachment Code to determine the cut length of VuSafe panels for the location being measured.

Installers will also refer to this FH dimension and the Attachment Code to confirm the intended method of attachment and placement of channels or direct mount hardware.

Following this procedure will streamline the production and installation processes and will eliminate errors and waste.

Measure/Order

Step one: Number and measure the opening (use the Location Worksheet template provided)

Step two: Determine the Attachment Code and record the FH dimension

Step three: Enter the values from written worksheet to VSMS* electronic form.

*VuSafe Management System allows you to enter the field data on easy to use forms with drop down menus for fast location retail costing. The worksheets report to a retail summary proposal format which can be presented to the client.

Once an order is accepted, the worksheets will translate into production order forms which are then simply submitted to VuSafe Industries, LLC. production.

Code: HH/F-BAdd : 1 3/4”

VuSafe TM

TM

Attachment Code Guide

Hurricane Hook

VS_HurricanHooks4272012 www.vusafe.com

Code: HH/F-AAdd : 3/4”

Copyright © 2012 VuSafe Industries, LLC. All rights reserved.

Choose install style and determine Finished Height.

3/8” 5/8” 7/8”

STITCH (for over 108” Final Height)

3/8” 5/8” 7/8”

LOC# FLOOR ROOM DESCRIPTION

A1 B1 A2 B2 FH PL #PANs

Attachment Code:

#11 2nd Bedroom double hung 33 5/8” 56 7/8” 40 3/4” 62 7/8” 62” 62” 3

HHF/LF-A √

Take care to evaulate mounting conditions when determining finished height, uneven surface conditions may effect spacing. All Channels must be installed Level and Parallel.

Code: HHF/F-AAdd : 1 3/8”

Code: HHF/F-BAdd : 3/8”

Code: HHF/F-CAdd : 3/8”

Code: HHF/F-DDeduct : 5/8”

Code: HH/DMAdd : 2 1/4”

Code: HHF/DM-AAdd : 1 1/2”

Code: HHF/DM-BAdd : 3/4”

Code: HH/LFAdd : 3/8”

Code: HHF/LF-ANo Deduction

Code: HHF/LF-BDeduct : 1”

w/ F-Track w/ F-Track w/ F-Track

w/ F-Track Top & Bottom(recommended for masonry attachment)w/ F-Track

(Example)

VuSafe TM

Attachment Code Guide

Ultra-H Header


Code: UH/F-ADeduct: 2 3/8”

VS_Ultra-HHeader9292011 Copyright ©2012 VuSafe Industries, LLC. All Rights Reserved www.vusafe.com 800-522-1599

Ultra-U HeaderUltra-U (Ultra-H w/mounting fin Removed)

Code: UH/F-BDeduct: 1 3/8”

Code: UH/DMDeduct: 5/8”

Code: UH/LFDeduct: 2 3/4”

Code: UU/F-ADeduct: 1 3/8”

Code: UU/F-BDeduct: 3/8”

Code: UU/DMAdd: 3/8” Code: UU/LF

Deduct: 1 3/4”

3/8” 5/8” 7/8”


3/8” 5/8” 7/8”



Attachment Code:

#11 2nd Bedroom double hung 33 5/8” 56 7/8” 40 3/4” 62 7/8” 62” 59 5/8” 4

UH/F-A √


w/ F-Track

(Example)

TM

VS_HurricaneDirect4272012 www.vusafe.com 888-232-2331Copyright © 2012 VuSafe Industries, LLC. All rights reserved.

VuSafe Attachment Code Guide

Direct

Direct Mounting Options

L/F-Sill& L/F-Sill


3/8” 5/8” 7/8”


3/8” 5/8” 7/8”



Attachment Code:

#11 2nd Bedroom double hung 33 5/8” 56 7/8” 40 3/4” 62 7/8” 62” 63” 3

F/F-B √


Code: F/F-ADeduct : 1”

F-Track Top & Bottom F-Track & L/F Sill

Code: F/F-BAdd : 1”

Code: F/F-CNo Deduction

Code: F/F-DNo Deduction

Code: F/LF-AAdd : 3/8”

Code: F/LF-BDeduct : 5/8”

Code: LF/LFDeduct : 1 1/4”

Code: DM/DMAdd : 1 5/8”

(Example)

L/F Sill & F-Track

Code: LF/F-AAdd : 1 1/2”

Code: LF/F-BDeduct : 1/2”

L/F Sill & Direct Mount

Code: LF/DMNo Decuction

Code: DM/LFNo Deduction

Mount

????? ???????????????? ?? VuSafeTM Storm Panel SystemPanel Width Worksheet

14.00”20.00”26.25”32.25”38.50”44.50”50.75”56.75”63.00”69.00”75.25”81.25”87.50”93.50”99.75”

105.75”112.00”118.00”124.25”130.25”136.50”142.50”148.75”154.75”161.00”167.00”173.25”179.25”185.50”191.50”197.75”203.75”210.00”

21.00”27.25”33.25”39.50”45.50”51.75”57.75”64.00”70.00”76.25”82.25”88.50”94.50”

100.75”106.75”113.00”119.00”125.25”131.25”137.50”143.50”149.75”155.75”162.00”

168.00”174.25”180.25”186.50”192.50”198.75”

204.75”211.00”

15.00”

14.00”

20.00”

26.25”

Suggested Minimum Channel Width

This table is for determining Finished Width Only. **Slight variances may be experienced due to panel corrugation.

Total Panel Width

VS_Panelwithworksheet6122008 Copyright © 2008VuSafe Industries, LLC. All Rights Reserved www.vusafe.com 800-522-1599VS_Panelwithworksheet4272012 Copyright © 2012 VuSafe Industries, LLC. All Rights Reserved www.vusafe.com 800-522-1599

VuSafe™ Panel Width Guide

SHEET OF

SITE TECH

VS_Msmnt_Wrksht_10102011

WHITE NANTUCKET GRAY CUSTOM

CUSTOMER ACCT # JOB # DATE

SIDING TYPE TRIM TYPE




3/8” 5/8” 7/8”


3/8” 5/8” 7/8”



Attachment Code:

3/8” 5/8” 7/8”


3/8” 5/8” 7/8”



Attachment Code:

3/8” 5/8” 7/8”


3/8” 5/8” 7/8”



Attachment Code:

3/8” 5/8” 7/8”


3/8” 5/8” 7/8”



Attachment Code:

Documents

VuSafeTM LLC VuSafe™ Measuring Instructions€¦ · The FH dimension is critical. The factory will use this dimension paired with the selected Attachment Code to determine the cut