Upload
nico-demoi
View
220
Download
0
Embed Size (px)
Citation preview
7/30/2019 Vufold Preinstallguide Finesse
1/2
3 door Slimline
3 left open towards you
4 door Slimline and Wide t
3 left 1 right open towards you
4 door Slimline
5 door Wide t
5 left open towards you
5 left open away from you
Open away from you
5 right open towards you
Identi es single or double openingdoors for daily access
5 right open away from you
6 door Slimline and Wide t
Open towards you
3 left open away from you
3 left 1 right open away from you 3 right 1 left open away from you
3 right 1 left open towards you
3 right open away from you
3 right open towards you
Set confgurations and installation optionsInternal olding, sliding room dividers
Vu old (a division o JCI Limited) | Queens Court | Queens Avenue | Maccles eld| Cheshire SK10 2BN| T: 01625 442899| E: in o@vu old.co.uk | www.vu old.co.uk
35
7/30/2019 Vufold Preinstallguide Finesse
2/2
Option 1
Floor thickness o 14mm or less
The special rame cill supplied with the set is suitable or anyfooring (tiles, carpet and underlay, wood fooring) o 14mmthickness or less, as shown in Fig 1.
Flooring can be tted up to the 15mm edge or a smootherfoor line.
For fooring less than 14mm thickness, assembled outer rame sizes are:
Slimline Assembled Frame Size
3 Door 2074mm high x 1904mm wide4 Door 2074mm high x 2518mm wide6 Door 2074mm high x 3746mm wide
Flooring
Example
Fig 1
14mm
Deciding the brickwork or stud wall openingsizes and preparing the site
Very important!
Be ore preparing the opening in the brickwork or stud wall, you must rstdecide what fooring will be used and its thickness.
Option 2
Flooring with thickness more than 14mm
I your fooring is 14mm thick or more, you will need to raise theheight o the rame by using plywood packing underneath the
ull length o the rame cill.
For example: i using 20mm thick fooring, you will need an8mm plywood packer piece.
l i ill
Flooring
Example
Fig 2
8mm20mm
The brickwork or stud wall opening height will be 2074mm + the height o the packing under the rame cill.
Wideft Assembled Frame Size
4 Door 2074mm high x 3050mm wide5 Door 2074mm high x 3797mm wide6 Door 2074mm high x 4202mm wide
Diagonal tolerance =
+/- 2mm
Brickwork or stud wall opening width = Assembled frame width + 5mm to 10mm
Option 2Brickwork or stud wallopening height =frame height + door cill
packer thickness +5mm to 10mm
Option 1Brickwork or studwall openingheight =frame height +5mm to 10mm
Vu old (a division o JCI Limited) | Queens Court | Queens Avenue | Maccles eld| Cheshire SK10 2BN| T: 01625 442899| E: in o@vu old.co.uk | www.vu old.co.uk
35