VSE/POWER, all the news since z/VSE 4 - IBM z/VM | .IBM hardware products are manufactured from new

  • View
    217

  • Download
    0

Embed Size (px)

Text of VSE/POWER, all the news since z/VSE 4 - IBM z/VM | .IBM hardware products are manufactured from new

LiveVirtualClass 2012

LVC 2012 - VSE/POWER news

http://twitter.com/IBMzVSEhttp://www.ibm.com/zVSE

VSE/POWER, all the news since z/VSE 4.2

Martin Walbruehl, VSE/POWER

2012 IBM 2

LVC 2012 VSE/POWER news

The following are trademarks of the International Business Machines Corporation in the United States, other countries, or both.

The following are trademarks or registered trademarks of other companies.

* All other products may be trademarks or registered trademarks of their respective companies.

Notes: Performance is in Internal Throughput Rate (ITR) ratio based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. IBM hardware products are manufactured from new parts, or new and serviceable used parts. Regardless, our warranty terms apply.All customer examples cited or described in this presentation are presented as illustrations of the manner in which some customers have used IBM products and the results they may have achieved. Actual environmental costs and performance characteristics will vary depending on individual customer configurations and conditions.This publication was produced in the United States. IBM may not offer the products, services or features discussed in this document in other countries, and the information may be subject to change without notice. Consult your local IBM business contact for information on the product or services available in your area.All statements regarding IBM's future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only.Information about non-IBM products is obtained from the manufacturers of those products or their published announcements. IBM has not tested those products and cannot confirm the performance, compatibility, or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.Prices subject to change without notice. Contact your IBM representative or Business Partner for the most current pricing in your geography.

Adobe, the Adobe logo, PostScript, and the PostScript logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States, and/or other countries.Cell Broadband Engine is a trademark of Sony Computer Entertainment, Inc. in the United States, other countries, or both and is used under license therefrom. Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.Intel, Intel logo, Intel Inside, Intel Inside logo, Intel Centrino, Intel Centrino logo, Celeron, Intel Xeon, Intel SpeedStep, Itanium, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.UNIX is a registered trademark of The Open Group in the United States and other countries. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. ITIL is a registered trademark, and a registered community trademark of the Office of Government Commerce, and is registered in the U.S. Patent and Trademark Office.IT Infrastructure Library is a registered trademark of the Central Computer and Telecommunications Agency, which is now part of the Office of Government Commerce.

For a complete list of IBM Trademarks, see www.ibm.com/legal/copytrade.shtml:

*, AS/400, e business(logo), DBE, ESCO, eServer, FICON, IBM, IBM (logo), iSeries, MVS, OS/390, pSeries, RS/6000, S/30, VM/ESA, VSE/ESA, WebSphere, xSeries, z/OS, zSeries, z/VM, System i, System i5, System p, System p5, System x, System z, System z9, BladeCenter

Not all common law marks used by IBM are listed on this page. Failure of a mark to appear does not mean that IBM does not use the mark nor does it mean that the product is not actively marketed or is not significant within its relevant market.

Those trademarks followed by are registered trademarks of IBM in the United States; all others are trademarks or common law marks of IBM in the United States.

2012 IBM 3

LVC 2012 VSE/POWER news

Agenda

VSE/POWER in z/VSE 4.2

Spool handling by Age Report queue entry manipulation Omit Forms (FNO) grouping Make FCB phase name visible & alterable

VSE/POWER in z/VSE 4.3

Overview of functional enhancements Output Limitation Facility OGM PUNCH output redirection into AF library

VSE/POWER in z/VSE 5.1 and 5.1.1

New TKN attribute LST and PUN Duplicates by IPWSEGM macro call

2012 IBM 4

LVC 2012 VSE/POWER news

VSE/POWER functional enhancements in previous releases

Presentation VSE/POWER Whats new since VSE/ESA V2.5 covers enhancements and new functions from VSE/ESA 2.5 until z/VSE 4.1, e.g.

Data File ( 1 or n extents) extension on warm start

Queue File re-allocation / extension on warm start

Node name change during warm start

PNET TCP/IP & PNET SSL

SAS exploited by IUI for browsing queue entries in creation

POFFLOAD/ BACKUP/PICKUP/SAVE creates tape journal

Enhanced PDISPLAY commands (D Q, D CRE, D DEL, D ALL, D TOTAL, D BIGGEST,)

New commands PSEGMENT and PVARY MSG

ftp://public.dhe.ibm.com/eserver/zseries/zos/vse/pdf3/techconf2007/sanantonio/E16_VSEPOWER_-_A_review_of_whats_new_since_VSEESA_V2.5.pdf

2012 IBM 5

LVC 2012 VSE/POWER news

VSE/POWER in z/VSE 4.2 - Overview

z/VSE 4.2 VSE/POWER Overview

Release Information, Manuals and Migration

Recommended Service Level

Spool handling by Age

Report queue entry manipulation

Omit Form Number (FNO) grouping

FCB phase name made visible & alterable

2012 IBM 6

LVC 2012 VSE/POWER news

VSE/POWER in z/VSE 4.2 Release Information, Manuals, APARs

VSE/POWER 8.2 Release Information and Manuals

Identification of VSE/POWER 8.2

MSHP Component identification number 5686-CF8-03-01C SUBSID NOTIFY call with X080200 Character string C01C in each phase PDISPLAY STATUS and SIR output show VSE/POWER 8.2.0 plus APAR Level

New Manual

VSE/POWER Administration & Operation 8.2, SC33-8314-02

Recommended VSE/POWER service levelDY47363 / UD53817 Deadlock between TCP/IP and VSE/POWER stops spooling

DY47310 / UD53763 + UD53765 Duplicate $SPLnnnn not handled correctly

DY47313 / UD53757 Signon problems between 2 PNET TCP/IP nodes

DY47260 / UD53702 + UD53701 1Q2CI names IPW$$CPF as failing phase erroneously.

2012 IBM 7

LVC 2012 VSE/POWER news

VSE/POWER in z/VSE 4.2 Spool Manipulation by Age & Reporting

Spool handling by Age

New search operand CRAGE to select spool entries based on creation time

E.g. PDISPLAY LST,CRAGE

2012 IBM 8

LVC 2012 VSE/POWER news

VSE/POWER in z/VSE 4.2 FNO grouping & FCB display

Omit Form Number Grouping

New LST | PUN output with FNO specified is sorted in groups with same FNO

Useful to minimize form changes on old printers No longer needed for modern printers where forms are created by overlays

To group by priority and time only specify autostart statement

SET SORTFNOFF=abc... (abc specifies classes with FNO grouping disabled)

Make FCB phase name visible & alterable

PDISPLAY with FULL=YES shows FCB-image phase for LST output

New command operand CFCB= to select and manipulate list queue entries

E.g. PDISPLAY LST,CFCB=FCB1

New PALTER operand FCB to change the name of the FCB-image phase

E.g. PALTER LST,CFCB=FCB1,FCB=NEWFCB

Note that the LST entry is not reformatted ! FCB is used at print time only!

2012 IBM 9

LVC 2012 VSE/POWER news

VSE/POWER in z/VSE 4.3 - Overview

z/VSE 4.3 VSE/POWER Overview

Release Information, Manuals and Migration

Recommended Service Level

Functional Enhancements

TS7700 WORM tape Restart PNET Passive TCP/IP Connection Operator command improvements (CQNUM, CSYSID) Display Date and Time of VSE/POWER Job Start

Output Limitation Facility

Punch Output redirection into VSE/AF Library Member

OGM Support for SAS Interface (OGM = Output Generation Message)

2012 IBM 10

LVC 2012 VSE/POWER news

VSE/POWER in z/VSE 4.3 - Release Information, Manuals, APARs

VSE/POWER 8.3 Release Information and Manuals

Identification of VSE/POWER 8.3

MSHP Component identification number 5686-CF8-03-02C SUBSID NOTIFY call with X080300 Character string C02C in each phase PDISPLAY STATUS and SIR output show VSE/POWER 8.3.0 plus APAR Level

New Manuals

VSE/POWER Administration & Operation 8.3, SC33-8314-03 VSE/POWER Application Programming 8.3, SC34-2601-00

Recommended VSE/POWER service levelDY47326 / UD53832 Deadlock between TCP/IP and VSE/POWER stops spooling

DY47304 / UD53745 + UD53746 Duplicate $SPLnnnn not handled correctly

DY47312 / UD53752 + UD53753 1Q2CI names IPW$$CPF as failing phase erroneously.

2012 IB

Recommended

View more >