Embed Size (px)
DESCRIPTION
Vrm Kiln Cooler
Citation preview
Printed
Page
Work order accumulation
Work order key 001192
Position key 461
Maint.Object key 461.CP525 Screw compressor
Text
Priority 3 Account key DefaultJob type CMP Job code keyInterval 0 Planned start date 8/1/2014 03:56:00 AMOrdered by shift leaders Planned end date 8/2/2014 03:56:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001193
Position key 465
Maint.Object key 465.RL620 Rotor scale
Text
Priority 3 Account key DefaultJob type CMP Job code key
471CP525: this is the transpotation compressor of the coal system .the coupling of this compressor is broken and need to change with new one . this compressor with coal mill shop.the coal mill work with 2 compressor and it important to prepair the 471CP525 becuase if any tripped on the other 2 compressor this mean stopped the kiln .
hole at the main burner coal transportation system near 465RL620 need to fix.this hole cuase leak of the coal near the kiln .
Interval 0 Planned start date 8/1/2014 06:32:00 AMOrdered by shift leaders Planned end date 8/2/2014 06:32:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001209 flaps of 421CN1160 (the cyclone stage 6) is stucked need to check by mechanicla
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN160 Cyclone Instrumentation
Text
Priority 3 Account key DefaultJob type CMP Job code keyInterval 0 Planned start date 8/10/2014 09:40:00 PMOrdered by shift leaders Planned end date 8/11/2014 09:40:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001210 flaps of 421CN11150(the cyclone stage 5) is stucked need to check by mechanicla
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN150 Cyclone Instrumentation
Text
Priority 3 Account key DefaultJob type CMP Job code key
flaps of 421CN1160 (the cyclone stage 6) is stucked need to check by mechanicla team
flaps of 421CN11150(the cyclone stage 5) is stucked need to check by mechanicla team
Interval 0 Planned start date 8/10/2014 09:45:00 PMOrdered by shift leaders Planned end date 8/11/2014 09:45:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001211 flaps of 421CN1130 (the cyclone stage 3) is stucked need to check by mechanicla
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN130 Cyclone Instrumentation
Text
Priority 3 Account key DefaultJob type CMP Job code keyInterval 0 Planned start date 8/10/2014 09:47:00 PMOrdered by shift leaders Planned end date 8/11/2014 09:47:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001212 flaps of 421CN1110 (the cyclone stage 1) is stucked need to check by mechanicla
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN110 Cyclone Instrumentation
Text
Priority 3 Account key DefaultJob type CMP Job code key
flaps of 421CN1130 (the cyclone stage 3) is stucked need to check by mechanicla team
flaps of 421CN1110 (the cyclone stage 1) is stucked need to check by mechanicla team
Interval 0 Planned start date 8/10/2014 09:48:00 PMOrdered by shift leaders Planned end date 8/11/2014 09:48:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001289
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KB102 Kiln Base
Text Prevent leakage oil at rollers for tire 2
Priority 4 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 8/28/2014 04:39:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 8/29/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001674 re-fix the ring inspeetin door to prevent leakage air at cyclone
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN110 Cyclone InstrumentationText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/15/2014 12:42:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001675 re-fix the ring inspeetin door to prevent leakage air at cyclone
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN115 Cyclone InstrumentationText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/15/2014 12:53:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001676 re-fix the ring inspeetin door to prevent leakage air at cyclone
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN130 Cyclone InstrumentationText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/15/2014 12:54:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001677 re-fix the ring inspeetin door to prevent leakage air at cyclone
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421CN120 Cyclone InstrumentationText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/15/2014 12:55:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001688 add oil on the unit at links
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471AC100 Apron conveyorText
Priority 2 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/15/2014 03:57:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001690 side skirt at fed shoot
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471AC100 Apron conveyorText
Priority 6 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 10/15/2014 03:59:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001691 leakage air
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471BF150 Bag Filter instrumentationText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/15/2014 04:04:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001692 repr hole
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471CV300 Chain conveyorText
Priority 6 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/15/2014 04:07:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001693 leakage dust frum rotary
Position key 441 Clinker Cooler Department
Maint.Object key 441RF565 Rotary feederText
Priority 4 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 10/15/2014 04:09:00 PMOrdered by Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001694 leakage dust frum rotary
Position key 441 Clinker Cooler Department
Maint.Object key 441RF575 Rotary feederText
Priority 4 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 10/15/2014 04:15:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001695 rplc oil
Position key 441 Clinker Cooler Department
Maint.Object key 441CV610 Chain conveyorText
Priority 7 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/15/2014 04:21:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001696 rplc oil for gear
Position key 441 Clinker Cooler Department
Maint.Object key 441CV600 Chain conveyorText
Priority 7 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/15/2014 04:24:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001697 rplc oil for gear
Position key 441 Clinker Cooler Department
Maint.Object key 441CV615 Chain conveyorText
Priority 7 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/15/2014 04:26:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001698 rplc oil for gear
Position key 441 Clinker Cooler Department
Maint.Object key 441CV618 Chain conveyorText
Priority 7 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 10/15/2014 04:27:00 PMOrdered by Rajee Al-Mashni Planned end date 10/16/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001715
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431IS170 Kiln inlet seal
Text re-tight the bolt at inlet seal on the kiln to prevent vibration on the flange
Priority 1 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/16/2014 12:13:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 10/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001723 patch the wear at feeding chute
Position key 441 Clinker Cooler Department
Maint.Object key 441CV605 Chain conveyor
Text patch the wear at feeding chute
Priority 3 Account key DefaultJob type CMP Job code key REPRInterval 0 Planned start date 10/16/2014 01:49:00 PMOrdered by ismail ramadan Planned end date 10/17/2014 01:49:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001746 oil leakage from 351be340
Position key 351 Kiln Feed Department
Maint.Object key 351BE340 Bucket elevatorText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 10/19/2014 10:27:00 AMOrdered by Abed Al azeez Al manaseer Planned end date 10/19/2014 11:27:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001748 rplc v belt
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471FN153 Fan
Text
Priority 3 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/19/2014 11:43:00 AMOrdered by Rajee Al-Mashni Planned end date 10/20/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001749 reapair the sprocket for AC100 near drive
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471AC100 Apron conveyorText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/19/2014 11:45:00 AMOrdered by Rajee Al-Mashni Planned end date 10/20/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001758 Re-fix Impact Idlers on the belt conveyor
Position key 311 Raw Mill Feed Department
Maint.Object key 311BC600 Belt conveyorText
Priority 3 Account key Default
Job type CMU Job code key REPRInterval 0 Planned start date 10/19/2014 02:40:00 PMOrdered by Rajee Al-Mashni Planned end date 10/20/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001765 adjust gap between cone cover and install missing bolts at roller 3
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text adjust gap between cone cover and install missing bolts at roller 3
Priority 2 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 10/19/2014 03:17:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 10/20/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001833 change the filter fan of 351AS350
Position key 351 Kiln Feed Department
Maint.Object key 351AS350 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 10/21/2014 09:19:00 AM
Ordered by Abed Al azeez Al manaseer Planned end date 10/21/2014 10:19:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001834 change the filter fan of 351AS355
Position key 351 Kiln Feed Department
Maint.Object key 351AS355 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 10/21/2014 09:24:00 AMOrdered by Abed Al azeez Al manaseer Planned end date 10/21/2014 10:24:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001846 leaking oil from shaft gear
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431MD140 Main driveText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/21/2014 11:31:00 AMOrdered by Rajee Al-Mashni Planned end date 10/22/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001847 leaking oil from sait glass
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KB101 Kiln BaseText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/21/2014 11:39:00 AMOrdered by Rajee Al-Mashni Planned end date 10/22/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001851 add oil to uint lub
Position key 441 Clinker Cooler Department
Maint.Object key 441BQ110 Blasting EquipmentText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/21/2014 11:56:00 AMOrdered by Rajee Al-Mashni Planned end date 10/22/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001852 repair outlet seal
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431XA175 Kiln outlet sealText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/21/2014 12:04:00 PMOrdered by Rajee Al-Mashni Planned end date 10/22/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001857 CLEN OIL FROM UINT HYDRAULIC SYSTEM
Position key 441 Clinker Cooler Department
Maint.Object key 441HY420 Hydraulic systemText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 08:44:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001858 ADD GREAS TO ROLLER BREAKER
Position key 441 Clinker Cooler Department
Maint.Object key 441RB400 Roller breakerText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 08:48:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001867 material leakage from 321md140
Position key 321 Raw Mill Department
Maint.Object key 321MD140 Main DriveText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 10/22/2014 11:04:00 AMOrdered by Abed Al azeez Al manaseer Planned end date 10/22/2014 12:04:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001869 CHANGE BEARING TO DRIVE FAN
Position key 421 Pre-Heater Department, ILC
Maint.Object key 421SD420 Shut off damperText
Priority 6 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/22/2014 11:11:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001870 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN501 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:42:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001871 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN502 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:44:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001872 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN503 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:44:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001873 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN504 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:45:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001874 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN505 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:46:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001875 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN506 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:47:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001876 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN507 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:47:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001877 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN508 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:48:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001878 ADD GREASE TO BEARNIG FAN
Position key 441 Clinker Cooler Department
Maint.Object key 441FN509 FanText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 11:49:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001879 CHANGE PIPE SUCTION FROM AC100 AT BF620
Position key 441 Clinker Cooler Department
Maint.Object key 441BF620 Bag Filter / Fabric Filter Instrumentation
Text
Priority 7 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/22/2014 11:58:00 AMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001880 ADD GREASE TO BEARNIG R.F
Position key 441 Clinker Cooler Department
Maint.Object key 441RF575 Rotary feederText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 12:10:00 PMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001881 ADD GREASE TO BEARNIG R.F
Position key 441 Clinker Cooler Department
Maint.Object key 441RF565 Rotary feederText
Priority 3 Account key Default
Job type CMU Job code key LUBRInterval 0 Planned start date 10/22/2014 12:12:00 PMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001889 Clean the gearbox oil to be chik Leaking
Position key 341 Raw Meal Silo Department
Maint.Object key 341BE050M02 Bucket Elevator Aux. Drive MotorText
Priority 3 Account key DefaultJob type CMU Job code key CLENInterval 0 Planned start date 10/22/2014 03:10:00 PMOrdered by Rajee Al-Mashni Planned end date 10/23/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001902 add grease to scrw donvetor
Position key 461
Maint.Object key 461.SC500 Scew conveyorText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/23/2014 01:43:00 PM
Ordered by Rajee Al-Mashni Planned end date 10/24/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001909 add grease to rope hoist
Position key 321 Raw Mill Department
Maint.Object key 321EH222 Electric HoistText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/23/2014 03:02:00 PMOrdered by Rajee Al-Mashni Planned end date 10/24/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001910 repair hoist
Position key 321 Raw Mill Department
Maint.Object key 321HI221 HoistText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/23/2014 03:05:00 PMOrdered by Rajee Al-Mashni Planned end date 10/24/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001955 Repair leak to the Lines Grease
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331SC510 Screw conveyorText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/27/2014 08:56:00 AMOrdered by Rajee Al-Mashni Planned end date 10/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001956 Repair leak to the Lines Grease
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331SC630 Screw conveyorText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 10/27/2014 09:06:00 AMOrdered by Rajee Al-Mashni Planned end date 10/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001967 to calibrate burner tip opening by centeringtheorifice pipe (install guide plate
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431BU500 Burner
Text
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 10/27/2014 05:33:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 10/27/2014 06:33:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001969 clen Filter and leak oil
Position key 351 Kiln Feed Department
Maint.Object key 351BL110 BlowerText
Priority 3 Account key DefaultJob type CMU Job code key CLENInterval 0 Planned start date 10/27/2014 07:05:00 PMOrdered by Rajee Al-Mashni Planned end date 10/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
to calibrate burner tip opening by centeringtheorifice pipe (install guide plate
Work order key 001970 clen Filter
Position key 341 Raw Meal Silo Department
Maint.Object key 341BL310 BlowerText
Priority 3 Account key DefaultJob type CMU Job code key CLENInterval 0 Planned start date 10/27/2014 07:08:00 PMOrdered by Rajee Al-Mashni Planned end date 10/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001971 Check & Maintain/ Replace V-Belt / Replace oil & clean
Position key 341 Raw Meal Silo Department
Maint.Object key 341BL305 Blower
Text Check & Maintain/ Replace V-Belt / Replace oil & clean
Priority 3 Account key DefaultJob type CMU Job code key CLENInterval 0 Planned start date 10/27/2014 07:09:00 PMOrdered by Rajee Al-Mashni Planned end date 10/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001978 replace side skirt rubber for feeding chute due to damage
Position key 311 Raw Mill Feed Department
Maint.Object key 311WF550 Weigh belt feeder
Text patch the wear on the belt conveyor as shown in attached documents.
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/28/2014 07:35:00 AMOrdered by Ibraheem Abu Alzaben Planned end date 10/29/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 001996 replace v-belts due to crack
Position key 351 Kiln Feed Department
Maint.Object key 351FN402 Fan
Text replace v-belts due to crack
Priority 2 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/28/2014 01:39:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 10/29/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002013 clen from rae materials
Position key 451 By-pass Department
Maint.Object key 451FN240 FanText
Priority 3 Account key DefaultJob type CMU Job code key CLENInterval 0 Planned start date 10/31/2014 11:22:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002015 Repair Sprkit to cv 600
Position key 441 Clinker Cooler Department
Maint.Object key 441CV600 Chain conveyorText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:41:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002016 Repair Sprkit to cv610
Position key 441 Clinker Cooler Department
Maint.Object key 441CV610 Chain conveyorText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:42:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002017 Repair Sprkit to cv 615
Position key 441 Clinker Cooler Department
Maint.Object key 441CV615 Chain conveyorText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:43:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002018 Repair Sprkit to cv 618 and leal oil from gear
Position key 441 Clinker Cooler Department
Maint.Object key 441CV618 Chain conveyorText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:44:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002019 Repair Sprkit
Position key 441 Clinker Cooler Department
Maint.Object key 441CV605 Chain conveyorText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:46:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002020 Repair pump and leak lines grease
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331GS310 Grease systemText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:47:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002021 Repair pump and leak lines grease
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331GS501 Grease systemText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:50:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002022 Repair pump and leak lines grease
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331GS511 Grease system
Text
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 11:51:00 AMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002029 change air slaed after 10 meters the fan
Position key 341 Raw Meal Silo Department
Maint.Object key 341AS090 Air SlideText
Priority 3 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/31/2014 12:03:00 PMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002030 change filter to fan
Position key 351 Kiln Feed Department
Maint.Object key 351AS355 Air SlideText
Priority 3 Account key Default
Job type CMU Job code key RPLCInterval 0 Planned start date 10/31/2014 12:09:00 PMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002031 repar leak air from fan to as
Position key 351 Kiln Feed Department
Maint.Object key 351AS350 Air SlideText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 10/31/2014 12:11:00 PMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002032 change v belt
Position key 441 Clinker Cooler Department
Maint.Object key 441FN622 Rotary feederText
Priority 3 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/31/2014 12:23:00 PM
Ordered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002033 change bearing to fan 197
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431FN197 FanText
Priority 3 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 10/31/2014 12:24:00 PMOrdered by Rajee Al-Mashni Planned end date 11/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002041 pathe the wear on deflector from the discharge chute
Position key 311 Raw Mill Feed Department
Maint.Object key 311BC620 Belt conveyor
Text pathe the wear on deflector from the discharge chute
Priority 3 Account key DefaultJob type CMP Job code key REPRInterval 0 Planned start date 11/1/2014 07:30:00 PMOrdered by ismail ramadan Planned end date 11/2/2014 07:30:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002074 patch wear at discharge chute above off-stand silo deo to wear
Position key 441 Clinker Cooler Department
Maint.Object key 441CV200 Chain conveyor
Text patch wear at discharge chute above off-stand silo deo to wear
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/6/2014 04:06:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 11/7/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002089 refix the safety guard near the driven pulley
Position key 321 Raw Mill Department
Maint.Object key 321BC010 Belt conveyor
Text refix the safety guard near the driven pulley
Priority 1 Account key DefaultJob type CMP Job code key REPRInterval 0 Planned start date 11/9/2014 02:51:00 PMOrdered by ismail ramadan Planned end date 11/10/2014 02:51:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002093 refix the safety cover on the motion
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331SC311 Screw conveyor
Text refix the safety cover on the motion
Priority 1 Account key DefaultJob type CMP Job code key REPRInterval 0 Planned start date 11/9/2014 03:04:00 PMOrdered by ismail ramadan Planned end date 11/10/2014 03:04:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002206 prevent leakage oil from bearing 4 at tyre1
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KB101 Kiln BaseText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/11/2014 10:21:00 AMOrdered by Ibraheem Abu Alzaben Planned end date 11/11/2014 11:21:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002379 Repair leaking Raw Materials
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331RF301 Rotary feederText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/16/2014 09:54:00 AMOrdered by Rajee Al-Mashni Planned end date 11/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002381 Calibration Safety valve (new)
Position key 351 Kiln Feed Department
Maint.Object key 351BL110 BlowerText
Priority 3 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 11/16/2014 10:23:00 AMOrdered by Rajee Al-Mashni Planned end date 11/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002382 Stop Leak of bearing 1+4
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KB101 Kiln BaseText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/16/2014 10:26:00 AMOrdered by Rajee Al-Mashni Planned end date 11/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002383 stop leak of bearing Number 3
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KB102 Kiln BaseText
Priority 7 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/16/2014 10:33:00 AMOrdered by Rajee Al-Mashni Planned end date 11/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002384 add grease to bearing
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331SC510 Screw conveyorText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 11/16/2014 10:36:00 AMOrdered by Rajee Al-Mashni Planned end date 11/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002392 re-fex leak aer at bag filter
Position key 441 Clinker Cooler Department
Maint.Object key 441BF620 Bag Filter / Fabric Filter InstrumentationText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/16/2014 02:42:00 PMOrdered by Rajee Al-Mashni Planned end date 11/17/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002401 prevent lackage air from air pipe at inlet seal jack
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431IS170 Kiln inlet sealText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/17/2014 09:01:00 AMOrdered by Rajee Al-Mashni Planned end date 11/18/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002404 replace air seal ring at all rollers due to gab more than 20mm
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller millText
Priority 7 Account key DefaultJob type CMP Job code keyInterval 0 Planned start date 11/17/2014 09:35:00 AMOrdered by Ibraheem Abu Alzaben Planned end date 11/18/2014 09:35:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002409 oil leakage on tyre 1 & tyre 2 on kiln
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KL100 KilnText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/17/2014 02:15:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/17/2014 03:15:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002413 hole & material leakage on down of 441CV610
Position key 441 Clinker Cooler Department
Maint.Object key 441CV610 Chain conveyorText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/17/2014 02:35:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/17/2014 03:35:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002435 add grease to rotary feeder
Position key 321 Raw Mill Department
Maint.Object key 321RF291 Rotary feederText
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 11/18/2014 02:22:00 PMOrdered by Rajee Al-Mashni Planned end date 11/19/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002440 Stop air leak from Flexible joint
Position key 341 Raw Meal Silo Department
Maint.Object key 341SI100 Silo InstrumentationsText
Priority 3 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 11/18/2014 02:39:00 PMOrdered by Rajee Al-Mashni Planned end date 11/19/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002442 re-fix missing 3 bolts hn the sel Gears
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/18/2014 02:48:00 PMOrdered by Rajee Al-Mashni Planned end date 11/19/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002461 cleaning filter fan of 321AS500
Position key 321 Raw Mill Department
Maint.Object key 321AS500 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/19/2014 04:30:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/19/2014 05:30:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002463 cleaning on the filter of 321AS505
Position key 321 Raw Mill Department
Maint.Object key 321AS505 Air SlideText
Priority 1 Account key Default
Job type CMU Job code keyInterval 0 Planned start date 11/19/2014 04:31:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/19/2014 05:31:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002464 cleaning on the filter 321AS510
Position key 321 Raw Mill Department
Maint.Object key 321AS510 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/19/2014 04:33:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/19/2014 05:33:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002465 cleaning on the filter fan of 321AS515
Position key 321 Raw Mill Department
Maint.Object key 321AS515 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/19/2014 04:34:00 PM
Ordered by Abed Al azeez Al manaseer Planned end date 11/19/2014 05:34:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002466 cleaning on the filter fan of 321AS520
Position key 321 Raw Mill Department
Maint.Object key 321AS520 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/19/2014 04:35:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/19/2014 05:35:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002468 lubricate the chain of 431FN185
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431FN185 Fan coolingText
Priority 2 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/19/2014 04:39:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/21/2014 04:39:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002473 oil leakage from 431FN197
Position key 441 Clinker Cooler Department
Maint.Object key 441MD140 Main driveText
Priority 2 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/20/2014 01:21:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/22/2014 01:21:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002474 oil leakage from 431FN197
Position key 441 Clinker Cooler Department
Maint.Object key 441HY420 Hydraulic systemText
Priority 2 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/20/2014 01:24:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/22/2014 01:24:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002499
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text patch wear on the protection at air seal pipe
Priority 2 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/23/2014 08:01:00 AMOrdered by Ibraheem Abu Alzaben Planned end date 11/24/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002526 cleaning the fan 341FN315
Position key 351 Kiln Feed Department
Maint.Object key 351AS300 Air SlideText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/23/2014 07:21:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/23/2014 08:21:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002527 pump stopped 431LQ150M01
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431LQ150M01 Lubrication Equipment MotorText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/23/2014 07:23:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/23/2014 08:23:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002529 tighten the screws
Position key 441 Clinker Cooler Department
Maint.Object key 441RF565 Rotary feederText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/23/2014 07:27:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/23/2014 08:27:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002530 material leakage from the flexible joint between (471AC100 & 471CV200)
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471AC100 Apron conveyorText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/23/2014 07:29:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/23/2014 08:29:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002559 Repair the tension rod seal under roller 3
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text Repair the tension rod seal under roller 3
Priority 2 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/25/2014 02:04:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 11/26/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002583 air leakage due to wearing ring on 431KL100
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431KL100 KilnText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/25/2014 07:24:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/25/2014 08:24:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002585 hole on shute between 441BF620 and 471AC100
Position key 441 Clinker Cooler Department
Maint.Object key 441BF620 Bag Filter / Fabric Filter InstrumentationText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/25/2014 07:28:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/25/2014 08:28:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002586 material leakage needs skirts on 471AC100
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471AC100 Apron conveyorText
Priority 1 Account key DefaultJob type CMP Job code keyInterval 0 Planned start date 11/25/2014 07:30:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/26/2014 07:30:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002587 oil leakage and needs skirts and tightning the screws on 331BE530
Position key 331 Exhaust Gas Conditioning Department
Maint.Object key 331BE530 Bucket elevatorText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/25/2014 07:47:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/25/2014 08:47:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002605 air leak from pip
Position key 465
Maint.Object key 465.RL570 Rotor scaleText
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/26/2014 09:29:00 AMOrdered by Rajee Al-Mashni Planned end date 11/27/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002649 hole and material leakage on 471DG120
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471DG120 GATEText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/26/2014 06:35:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/26/2014 07:35:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002651 oil leakage from 321LQ120
Position key 321 Raw Mill Department
Maint.Object key 321LQ120 Lubrication equipmentText
Priority 1 Account key DefaultJob type CMU Job code keyInterval 0 Planned start date 11/26/2014 06:37:00 PMOrdered by Abed Al azeez Al manaseer Planned end date 11/26/2014 07:37:00 PM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002719 add greas to bearing
Position key 471 Clinker Transport To Storage Department
Maint.Object key 471AC100 Apron conveyor
Text add greas to bearing
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 11/27/2014 12:47:00 PMOrdered by Rajee Al-Mashni Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002722 add grease to bearing
Position key 441 Clinker Cooler Department
Maint.Object key 441FN300 Fan
Text add grease to bearing
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 11/27/2014 01:16:00 PMOrdered by Rajee Al-Mashni Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002736
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text Replace split seal at roller 1 next planning stoppage
Priority 6 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 11/27/2014 04:39:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002737
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text Replace split seal at roller 3 next planning stoppage
Priority 6 Account key Default
Job type CMU Job code key RPLCInterval 0 Planned start date 11/27/2014 04:40:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002738
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text Replace cone covers at rollers 1&3
Priority 2 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 11/27/2014 04:40:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002739
Position key 321 Raw Mill Department
Maint.Object key 321RM100 Roller mill
Text Adjust and repair the cone cover at roller 2
Priority 1 Account key DefaultJob type CMU Job code key ADJTInterval 0 Planned start date 11/27/2014 04:41:00 PM
Ordered by Ibraheem Abu Alzaben Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002740
Position key 321 Raw Mill Department
Maint.Object key 321SR150 Separator
Text Re-Tight and Re-fix missing the bolts at separator flange
Priority 1 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/27/2014 04:42:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 11/28/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002760 Replacement v-belt to fan 542
Position key 461
Maint.Object key 461.FN542 filter fan
Text Replacement v-belt to fan 542
Priority 1 Account key DefaultJob type CMU Job code key RPLCInterval 0 Planned start date 11/30/2014 12:08:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002761 Installation Cover Safety to Kpling
Position key 461
Maint.Object key 461.RF302 rotary feeder
Text Installation Cover Safety to Kpling
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/30/2014 12:10:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002762 Stood air leak from control Pressure
Position key 321 Raw Mill Department
Maint.Object key 321AS515 Air Slide
Text Stood air leak from control Pressure
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/30/2014 12:14:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002763 add grease to bearing
Position key 441 Clinker Cooler Department
Maint.Object key 441FN622 Rotary feeder
Text add grease to bearing
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 11/30/2014 12:17:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002765 Missing 3 nut at seal
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431IS170 Kiln inlet seal
Text Missing 3 nut at seal
Priority 6 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/30/2014 01:36:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002767 Repair arm door at kiln hnlet seal
Position key 431 Kiln Department , ROTAX 3
Maint.Object key 431IS170 Kiln inlet seal
Text Repair arm door at kiln hnlet seal
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/30/2014 01:46:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002768 need Check motor hydraulic
Position key 441 Clinker Cooler Department
Maint.Object key 441HY420M03 Hydraulic System Motor
Text need Check motor hydraulic
Priority 7 Account key DefaultJob type CMU Job code key INSPInterval 0 Planned start date 11/30/2014 01:52:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002769 Installation Cover Safety to Kpling
Position key 461
Maint.Object key 461.CP525 Screw compressor
Text Installation Cover Safety to Kpling
Priority 3 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/30/2014 02:06:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002771 stoop leak Water from Hose Fire
Position key 341 Raw Meal Silo Department
Maint.Object key 341SI100 Silo Instrumentations
Text stoop leak Water from Hose Fire
Priority 3 Account key DefaultJob type CMU Job code key LUBRInterval 0 Planned start date 11/30/2014 02:52:00 PMOrdered by Rajee Al-Mashni Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Work order key 002776 Prevent leakage air from pistion on the gate at tyre line(465DV040)
Position key 465
Maint.Object key
Text Prevent leakage air from pistion on the gate at tyre line(465DV040)
Priority 2 Account key DefaultJob type CMU Job code key REPRInterval 0 Planned start date 11/30/2014 03:22:00 PMOrdered by Ibraheem Abu Alzaben Planned end date 12/1/2014 12:00:00 AM
Counter interval 0.000 Next count. val. 0.000
Project key Responsible Mechanical Maintenance
Total working hours 0.000
Total working costs 0.000Total spare part costs 0.000Total Other services costs 0.000
Total costs 0.000
Modern Cement & Mining Co.
12/1/2014 14:51
1 of 132
Work order accumulation
