Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
VPN MANUAL – Mac OS X
Accessing your computer’s AirPort,
connect to the OleMiss wireless
network. Click “Join” to continue.
Open your internet browser. If you
have not already installed the Cisco
agent the network access logon
screen will appear. Enter your webID
and password and click continue.
If you have not already installed the
Clean Access Agent you will need to
install it. Click the “Launch NAC
Windows Agent” to continue. On
some computers it may ask that you
manually load the program. Go ahead
and do so.
VPN MANUAL – Mac OS X
The file to install will attempt to open.
Click “OK” if you agree to this file
being added to your computer.
The file will download and appear in
your downloads window. Once it has
completed downloading, double-click
the file to continue.
The file will appear as a package.
Double-click the package to start the
Cisco Clean Access Agent Installer.
The installer will open in a new
window and will guide you through
installation.
VPN MANUAL – Mac OS X
Read the information displayed. If you
agree to the statement click
“Continue” to move forward with
installation.
The installer will ask you to select the
installation location. Usually your
hard drive is the only place to install
the file. If there are multiple locations
make sure you select your computer’s
hard drive and click “Continue” to
move forward.
Click “Install” to progress with the
standard installation of the Clean
Access Agent.
VPN MANUAL – Mac OS X
Once installation is completed the
Agent should run automatically. Enter
your webID as your username and
your Ole Miss password to continue.
Open your system preferences and
select “Network” to continue.
In the network menu, click the plus (+)
sign to create a new network.
VPN MANUAL – Mac OS X
Select “VPN” from the Interface drop
down menu. Select “PPTP” as the
VPN Type. You may enter whatever
you like for Service Name (good
examples are SMBHC, Honors College
VPN, etc.). Click “Create” to continue.
Back in the network menu, select the
newly created network in the left
pane. Its configuration should appear
in the right, larger pane. For server
address enter “130.74.178.33”. In
account name you should enter your
webID preceded by “honors\” so that
it appears like this: honors\jdoe12.
Encryption should remain as
automatic. Click “Authentication
Settings” to continue.
In the User Authentication menu,
select Password and enter your
honors account password. Click “OK”
to continue. Click “Apply” in the
Network menu to continue.
VPN MANUAL – Mac OS X
In order to retrieve any documents
you have saved on your honors
college accounts you can go to your
desktop and click “Go” and “Connect
to Server” in the main bar at the top
of the screen. In the address bar type
in one of these commands:
smb://130.74.178.18/docs/username
to retrieve any documents in your
user folder.
smb://130.74.178.18/desktop/username
to retrieve what exists on your SMBHC
user desktop.
smb://130.74.178.18/users/username
to connect to all your folders.
NOTE: For the purposes of the
commands above, please enter your
own username where username is
mentioned.
To add a printer, open your system
preferences and click “Print & Fax” to
continue. In the Print & Fax menu
click the plus (+) sign to add a new
printer.
VPN MANUAL – Mac OS X
In the Add Printer menu click IP. In
the Protocol drop down menu select
“Line Printer Daemon – LPD” to move
forward. Enter the address (four
printers to choose from:
130.74.178.39; 130.74.178.40;
130.74.178.44; and 130.74.178.50).
The computer can autodetect the
printer drive and find the correct
driver. Click add to continue.
Note: 130.74.178.40 is located in
Room 107.
130.74.178.39 and 130.74.178.44 are
located in the computer lab.
130.74.178 is located in Room 315.
The system will ask you to select the
options available in the printer. For
130.74.178.39, the options are
checked in the screenshot to the left.
Once you select the options, click
continue to add the printer.
Follow the same procedure with the
remaining printers. However, if the
computer cannot autodetect the
printer driver you may have to
identify it. If the computer cannot
identify the software “Generic
PostScript Printer” will appear in the
Printing Using field. If this is the case,
in the drop down menu select “Select
Printer Software” and click add to
continue.
VPN MANUAL – Mac OS X
The computer will ask you to select
the printer software. For the
130.74.178.40; 130.74.178.44; and
130.74.178.50 select HP LaserJet
P4010 Series and click OK to continue.
The system will ask you to select the
options available in the printer. For
the 130.74.178.40; 130.74.178.44;
and 130.74.178.50 you will have to
select the options later. So just click
Continue to move forward.
Open your system preferences and
select “Print & Fax” to continue. Once
the Print & Fax menu opens double-
click the 130.74.178.40;
130.74.178.44; or 130.74.178.50
printer. Click Printer Setup to
continue.
VPN MANUAL – Mac OS X
Select Driver from the top tabs and
select the options you see listed in the
screen shot to the left for the
130.74.178.40 and 130.74.178.50. For
the 130.74.178.44 leave Tray 4 as “not
installed.”