Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobevalves.com
Mounting PositionsMaintaining Water Levels in:• Water Storage Tanks• Water Cooling Towers• Air Conditioning Systems• High Pressure Cleaning Systems• Animal Drinking Troughs• Irrigation Applications
VORTEX FLOAT VALVE SPECIFICATION
Vortex float valves are float operated valves for use in automatic filling of water tanks, troughs, cisterns etc. The valve is configured for above water mounting. The float operates a small pilot valve which in turn operates the main diaphragm valve. Vortex float valves are a good choice where maximum flow, compact, robust, non corrosive construction and variable float levels are required.
Description
• High flow• Compact robust construction• Mounts horizontally or vertically• Made from corrosion resistant materials • Valve unscrews from tail for easy Valve seal access • Shuts down slowly to minimise water hammer• 20 - 60mm (¾” - 2 ½”) water level differential (increases as water inlet pressure increases)• Pressure rating 0.3 - 7 Bar (5 - 100 PSI)• Float position easily adjustable with no tools• Valve has switch to lock it in off position • Has port to connect Frostpro anti freeze device
eg A Vortex Float Valve with 2” BSP thread has following spec numbers VXV50
Note: Product may differ slightly from these specs due to ongoing product development.
PRODUCT CODEINLET SIZECODE
VXV 1 ¼” bsp1 ½’’ bsp2” bsp1 ¼” NPT1 ½’’ NPT2’’ NPT
3240501141122
Vortex FloatValve
Flow Graph ( All Sizes )
Features
ApplicationsTOP ENTRY WITH EXTENSION
TOP ENTRY MIDDLE EXTENSION
Two inlet diameters above overflow to avoid back siphoning N.B. Some mounting positions may not comply with local regulations
OptionsInlet Size
Specifies this Thread size
Standard Float 70mm
Floats: 70mm wide floats supplied standard.
Note: Not Suitable for underwater mounting. Refer to VXVB for Vortex underwater mounting.
NPT 1 ¼” 1 ½’’ 2”
TOP ENTRY NO EXTENSION
Tail unscrews
BSP 2”1 ¼” 1½’’
32mm 40mm 50mm1.5
1.0
0.5
0 100 200 300 400 500 600 700
2.0
2.5
Flow LPM
Imperial GPM
Inle
t Pre
ssur
e B
ar
20 40 60 80 100 120 140
35
30
25
20
15
10
5
PS
I
60
0 L
/ M
IN
3.1
VORTEX PRODUCT INFO
Vortex Dimensions
60
0 L
/ M
IN
Valve Body
White Internal Parts
Arm Assembly
Diaphragm
Seal
GF Nylon
Acetal
ABS
EPDM
Urethane
Filter
Springs, Bolts, Nuts, Pins, Screws
O’Rings
Float
PP/Nylon
304 Stainless Steel
Nitrile
HDPE
4 ¼” 108mm
1 7/16” 31mm
6 15
/16”
17
6mm
6 17/32” 164mm
6 13/16” 173mm
1 25
/32”
45
mm
2 9/
32”
58m
m
4 11
/16”
11
9mm
5 5/
32”
131m
m
Float Dimensions
70mm Float
6 13/32” 162.5mm
5 ⅞
” 14
9mm
2 ¾” 70mm
MaterialPart MaterialPart
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobevalves.com3.2
60ºC, 140ºFMaximum Operating Temperature
VORTEX DIMENSIONS & MATERIALS
2 DESCRIPTION CODE 1
2
3
4
5
6
7
8
9
10
11
VXP2010
VXP2020
VXP2030
VXP2040
VXP2050
VXP2060
VXP2070
VXP2080
VXP2090
VXP2100
VXP2110
Actuator Cap6g x 10 S/S Screw Frost Pro Plug Frost Pro O’ring Valve Cap Assembly Damping Spring Actuator Spring Bearings (set of two) Actuator Arm Bolt M6 x 65Washer M6 x 12.5
1
2
1
4
3
4
5
1
DESCRIPTIONCODE
3
2
CODE: VXV
1
2
3
4
5
VXP1010
VXP1020
VXP1030
VXP1040
VXP1050
70mm Float
Wing Bolt
Extension Arm
Bolt M5 x 12 Pan Slot
Extension Slide
1
2
3
4
VXP1
VXP2
VXP3
Float Assembly
Cap & Actuator Assembly
Diaphragm Assembly
Base Assembly
DESCRIPTION CODE
2
3
4
DESCRIPTION CODE 4Vortex Retainer
Vortex Base
Vortex O’ring
Vortex Tail 32mm
Vortex Tail 40mm
Vortex Tail 50mm
Vortex Tail 1 ¼” npt
Vortex Tail 1 ½” npt
Vortex Tail 2” npt
1
2
3
4
VXP4010
VXP4020
VXP4030
VXP4040
VXP4045
VXP4050
VXP4055
VXP4060
VXP4065
1
1
23
45
67
89
10
11
60
0 L
/ M
IN 3
DESCRIPTION CODE
1
2
VXP3
TPP3010
TPP3011
Diaphragm Assembly
Pilot Flow Filter (Fine)
Pilot Flow Filter (Coarse)
1
2
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobevalves.com 3.3
VORTEX PARTS IDENTIFICATION SHEET