VOLUME–IIIengineeringprojects.com/Tender/UploadFiles/3565_BOQ.pdf · 2018. 7. 30. · A.2 Non-Schedule Items 4,35,250.00 B.1 DSR-2012 Items with 28% CI 21,24,690.74 B.2 Non-Schedule

ANISO9001&14001COMPANY

TENDER DOCUMENT

TENDER No: NERO/CON/ASR/SRIKONA/311 dated 26.07.2018

FOR

TENDER FOR CONSTRUCTION OF 04(FOUR) NOS. TYPE-V ACCOMMODATION IN 01 BLOCKS OF (G+I) AND 01 NO TYPE-VI (G+I)

INCLUDING INFRASTRUCTURAL DEVELOPMENT WORKS FOR ASSAM RIFLES AT SRIKONA, ASSAM.

VOLUME–III

PRICE BID/BILL OF QUANTITY

Sl. No. ITEM DESCRIPTION

Amount After adding percentage

above/below/At par (Rs)

Base Cost (Rs)

GST (Rs)

Other Taxes (Rs)

Cess (Rs)

Total (To Match with Column 3)

(Rs)

1 2 3 4 5 6 7 8 (4+5+6+7)BUILDING PART (A)A.1 DSR Items with 28% CIA.2 Non-Schedule Items

DEVELOPMENT PART (B)B.1 DSR Items with 28% CIB.2 Non-Schedule Items

TOTAL

ENGINEERING PROJECTS (INDIA) LTD.(A Govt. of India Enterprise)NERO, Guwahati-781022

Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I) including infrastructuraldevelopment works for Assam Rifles at Srikona, Assam

ANNEXURE-AA

In Figures

In Words

BUILDING PART (A)

A.1 DSR-2012 Items with 28% CI 26604539.29

A.2 Non-Schedule Items 4,35,250.00

B.1 DSR-2012 Items with 28% CI 21,24,690.74

B.2 Non-Schedule Items 45,935.34TOTAL (PART A + PART B) 292,10,415.37

Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I) includinginfrastructural development works for Assam Rifles at Srikona, Assam

SUMMARY OF PRICES

ENGINEERING PROJECTS (INDIA) LTD.(A Govt. of India Enterprise)

NERO, Guwahati-781022

PRICE BID-CUM- BILL OF QUANTITIES

Bidders's Cost% Above/Below/At par

SL. NO. SECTION Estimated Cost (Rs)

The Quoted cost shall be inclusive of All Taxes, cess & GST. Bidder should fill up Annexure-AA clearly indicating Cost and levies (GST, other Taxes & Cess)

Amount after adding percentage above or below or at Par

(Rs)

DEVELOPMENT PART (B)

SL. NO. SECTION DSR 2012 Amount (Rs)

Non Schedule Amount (Rs.)

BUILDING PART (A)Type-V

a) Building (Annexure-I) 140,95,646.40 67,900.00b) Internal Sanitary and fittings (Annexure-II)i) Sanitary Instalation 1,71,059.00 0.00ii) Internal Water supply 1,31,714.80 0.00iii) Internal Drainage 1,02,828.05 43,500.00c) Internal Electrification (Annexure-III) 2,65,495.00 1,23,024.00

Type-VId) Building (Annexure-IV) 57,32,398.52 16,150.00e) Internal Sanitary and fittings (Annexure-V)i) Sanitary Instalation 54,788.15 0.00ii) Internal Water supply 56,892.25 0.00iii) Internal Drainage 49,078.15 1,740.00f) Internal Electrification (Annexure-VI) 1,24,896.00 1,82,936.00

TOTAL PART(A) 207,84,796.32 4,35,250.00

ENGINEERING PROJECTS (INDIA) LTD.(A Govt. of India Enterprise)

NERO, Guwahati-781022

PRICE BID-CUM- BILL OF QUANTITIES

Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I) including infrastructural development works for Assam Rifles at Srikona, Assam

SUMMARY OF PRICES

a) Septic Tank & Soakpit (Annexure-VII) 2,83,218.47 0.00

b) Approch Path and Hard Standing (Annexure-VIII) 2,55,455.30 45,935.34

c) External Water Supply Line (Annexure-IX) 1,04,514.00 0.00

d) Retaining wall (Annexure-X) 5,67,278.13 0.00

e) Misc. works (Annexure-XI) 4,49,448.75 0.00TOTAL PART(B) 16,59,914.64 45,935.34

DEVELOPMENT PART (B)

(Annexure-I)

Sl. No Description Unit Qty. Rate(Rs.)

Amount(Rs.)

SUB HEAD - I EARTH WORK

1Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil

cum 776.33 130.80 1,01,543.40

All kinds of soil

2Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundationsetc. in layers not exceeding 20 cm in wateriing, lead upto to 50m and lift upto 1.5m cum 157.29 83.80 13,180.57

3Supplying and filling in plinth with sand under floors including, watering, rammingconsolidating and dressing complete. cum 14.53 749.30 10,889.95

4

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees andsaplings of girth upto 30 cm measured at a height of 1 m above ground leveland removalof rubbish upto a distance of 50 m outside the periphery of the area cleared. 100sqm 474.12 482.00 2,284.68

5 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%

Litre 193.78 185.95 36,033.39

6

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termitetreatment (excluding the cost of chemical emulsion): Along external wall where the apronis not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of thesubstructure to a depth of 300 mm including excavation channel along the wall & roddingetc. complete:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

metre 172.00 11.80 2,029.60

ENGINEERING PROJECTS (INDIA) LIMITED

A. CIVIL WORKS FOR TYPE-V QUARTER

Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I) including infrastructural development works for Assam Rifles at Srikona, Assam.

(A GOVERNMENT OF INDIA ENTERPRISE)NERO,Guwahati


Amount(Rs.)

7

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termitetreatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

sqm 193.78 88.25 17,101.09

SUB HEAD - II CONCRETE WORK

1 Providing and laying in position cement concrete of specified grade excluding the cost ofcentring and shuttering - All work upto plinth level1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

cum 65.00 3,888.20 2,52,733.00

2

Providing and laying cement concrete in retaining walls, return walls,walls (any thickness)including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills,fillets etc. up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 0.71 5,272.40 3,717.04

3Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1cement : 2 coarse sand(zone -III) : 4 graded stone aggregate 12.5 mm nominal size) sqm 50.14 207.55 10,406.56

4Applying a coat of residual petroleum bitumen of penetration VG 10 of approved qualityusing 1.7 kg per square metre on damp proof course after cleaning the surface withbrushes and finally with a piece of cloth lightly soaked in kerosene oil.

sqm 50.14 96.65 4,846.03

5

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast40mm nominal size well rammed and consolidated and grouted with fine sand includingfinishing the top smooth.

sqm 129.00 338.75 43,698.75


Amount(Rs.)

SUB HEAD - III RCC WORK

1

Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as perapproved design mix, including pumping of concrete to site of laying but excluding thecost of centering, shuttering, finishing and reinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge.All work upto plinth level cum 182.83 5,242.15 9,58,396.86All work plinth level upto roof level cum 267.30 5,781.50 15,45,382.01

2Add for using extra cement in items of design mix over and above the specified cementcontent therein quintal 100.00 589.8 58,980.00

3Centring and shuttering including strutting, propping etc. and removal of formfor:removal of form for:

a Foundations,footings,bases of columns including beams etc. for mass concrete sqm 325.00 166.90 54,242.50

b Walls ( any thickness) including attached pilasters, butteresses, plinth and string coursesetc. sqm 50.00 378.60 18,930.00

c Suspended floors, roofs, landings, balconies and access platform sqm 825.00 311.20 2,56,740.00d Shelves ( Cast in situ) sqm 9.72 311.20 3,024.86e Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 500.00 262.35 1,31,175.00

f Columns, pillars, piers, abutments, posts and struts sqm 400.00 365.60 1,46,240.00

g Stairs,(excluding landings) except spiral-staircasess. sqm 1.74 326.30 566.77

h Weather shade,chajjas,corbels etc inc sqm 15.30 411.10 6,289.83


Amount(Rs.)

4

Providing, hoisting and fixing upto floor five level precast reinforced cement concrete inlintels, beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering and finishing smooth with 6 mm thickcement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces but excluding the cost ofreinforcement with 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mmnominal size).

cum 3.00 6,754.00 20,262.00

5Steel Reinforcement for R.C.C work including straightening, cutting, bending,placing in position and binding all complete upto plinth level

Thermo-Mechanically Treated bars of grade Fe 500 D or more Kg 12,000.00 62.25 7,47,000.00

6Steel Reinforcement for R.C.C work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe 500 D or more Kg 54,000.00 62.25 33,61,500.00

7

Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stoneaggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire includingcentering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.

50 mm thick sqm 0.00 598.15 0.00

8Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C.projections. metre 155.20 22.25 3,453.20

SUB HEAD -IV BRICKWORK

1 Brick work with common burnt clay FPS (non modular) bricks of class designation 75 infoundation and plinth in:Cement mortar 1:4( 1 cement : 4 coarse sand ) cum 5.00 3,508.25 17,541.25

2Brick work with common burnt clay FPS (non modular) bricks of class designation 75 inSuperstructure above plinth upto floor V level in all shapes and sizes in cement mortar1:6 (1 cement : 6 coarse sand)Cement mortar 1:6( 1 cement : 6 coarse sand ) cum 234.16 3,876.15 9,07,635.99


Amount(Rs.)

3Half brick masonry with common burnt clay FPS ( non modular ) bricks of classdesignation 7.5 in Superstructure above plinth upto floor V level

Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 1,068.92 476.85 5,09,714.50

4Extra for providing and placing in position 2 Nos. 6mm dia MS bars at every 3rd course ofhalf brick masonry sqm 1,068.92 63.20 67,555.74

SUB HEAD -V MARBLE & GRANITE WORKS

1

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters, window sills , facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mmthick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding andpolishing to edges to give high gloss finish etc. complete at all levels.

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra area of slab over 0.50 sqmsqm 37.50 1,980.80 74,280.00

2Extra for providing edge moulding to 18mm thick marble stone counters,Vanities etc. overItem No. 8.2 including machine polishing to edge to give high gloss finish etc. completeas per design approved by Engineer-in-Charge

Marble work Metre 48.50 105.70 5,126.45

3Extra for fixing marble /granite stone, over and above corresponding basic item, in faciaand drops of width upto 150 mm with epoxy resin based adhesive, including cleaningetc.complete.

Metre 33.60 185.80 6,242.88

4

Extra for providing opening of required size & shape for wash basins/kitchen sink inkitchen platform, vanity counters and similar location in marble/stone work includingnecessary holes for pillar taps etc .including rubbing and polishing of cut edges etc.complete.

each 8.00 281.80 2,254.40


Amount(Rs.)

SUB HEAD -VI WOOD & PVC WORKS

1

Providing and fixing ISI marked flush door shutters non -decorative type, core of blockboard construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 86.52 1,578.30 1,36,554.52

2Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on alledges of shutters (over all area of door shutter to be measured) sqm 86.52 325.20 28,136.30

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or gradedwood particle board medium density grade I, IS : 3087 marked, including top cover of 6mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.

m 59.60 298.45 17,787.62

3Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.flats, square or round bars etc. including priming coat with approved steel primer allcomplete.Fixed to steel windows by welding kg 1,200.00 90.75 1,08,900.00

4

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mmdiameter bolts, nuts and wooden plugs and embedding in cement concrete block30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mmnominal size).

each 80.00 96.75 7,740.00

4aProviding and fixing oxidised M.S. Safety chain with necessary fixturesfor doors, (weighting not less than 450 gms). each 8.00 75.45 603.60

5Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating notless than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade,with nuts and screws etc. complete :

300x16mm each 60.00 203.80 12,228.00


Amount(Rs.)

6Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not lessthan grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade withnuts and screws etc. complete-

a 250 X 10 mm each 60.00 86.45 5,187.00b 200X 10 mm each 60.00 71.05 4,263.00

7Providing and fixing aluminium handles ISI marked anodised ( anodic coating not lessthan grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade withnuts and screws etc. complete-125 mm each 120.00 62.50 7,500.00

8Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodiccoating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colourand shade, with necessary screws etc. complete.

each 60.00 71.55 4,293.00

Twin rubber stopper

9

Providing and fixing factory made PVC door frame of size 50x47 mm with a wallthickness of 5 mm. made out of extruded 5 rigid PVC foam sheet mitred at corners andjoined with 2 Nos. of 150 mm long brackets of 15x15mm M.S. square tube,the verticaldoor profiles to be reinforced with 19x19 mm M.S. squire tube of 19 guage,EPDM rubbergasket weather seal to be provided through out the frame. The door frame to be fixed tothe wall using M.S. screws of 65/100 mm size complete as per manufactures specificationand direction of Engineer-in-charge

metre 59.40 404.60 24,033.24

10

Providing and fixing factory made panel PVC door shuttersfrom M.S. tube of 19 guagethickness, size 19x19 mm for styles and 15x15 mm for top and bottom rails,covered withheat moulded PVC "C" channel of 5 mm thick and 75 mm wide PVC sheets for toprail,lock rail and bottom rail on either side and 5 mm thick 20mm wide cross PVC sheet asgap insert for top rail and bottom rial,panelling of 5mm thick PVC sheet fitted in the M.S.frame welded/sealed to the styles and rails with 5x30mm PVC sheet beading on eitherside and joined together with solvent cement adhesive etc., complete as per manufacturespecification and direction of Engineer-in-charge fixed to frames with 4 Nos.M.S. powdercoated butt hinges (For W.C. and bathroom shutters).

30 mm thick prelaminated PVC door shutters Sqm 18.90 2,958.00 55,906.20Providing and fixing skirting with Pre laminated-------Priming coat on unexposed surface 18 mm thick Sqm 100.80 1,395.40 1,40,656.32


Amount(Rs.)

Providing and fixing 18mm thick 150m wide pelmet of coir venner board-----------allcomplete mts 59.60 406.75 24,242.30

11Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows andclerestory windows using wire gauge with average width of aperture 1.4 mm in bothdirections with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading Sqm 80.00 1,160.30 92,824.00SUB HEAD -VII STEEL WORK

1Structural steel work in single section fixed without connecting plate including cuttinghoisting, fixing in position & applying priming coat of approved steel primer all complete. kg 100.00 59.90 5,990.00

2Providing and fixing 1mm thick M.S. sheet door with frame of 40x40xmm angle iron and3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6mm for diagonal braces. sqm 10.08 2,551.45 25,718.62

3

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators,side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12B etc. complete of standard rolled steel sections, joints mitred and flash butt welded andsash bars tenoned and riveted, including providing and fixing of hinges, pivots, includingpriming coat of approved steel primer, but excluding the cost of other fittings, complete allas per approved design, (sectional weight of only steel members shall be measured forpayment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cmof C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) kg 6,270.00 96.30 6,03,801.00

4

Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured fromcommercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, beadand if required angle threshold of mild steel angle of section 50x25 mm, or base ties of1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means,including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate andshock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:

Profile C Fixing with adjustable lugs with split end tail to each jamb metre 100.80 370.00 37,296.00


Amount(Rs.)

Profile E Fixing with adjustable lugs with split end tail to each jamb metre 3.78 404.85 1,530.33

5

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clampof internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surfacehacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box bymeans of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be madeof 12mm dia M.S. bar bent to shape as per standard drawing.

each 32.00 117.45 3,758.40

6Steel work welded in built-up section/framed work including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer using structural steel etc.as requiredIn gratings, frames, guard bar, ladders, balcony and staircase railings, brackets, gatesand similar works Kg. 3,264.00 77.90 2,54,265.60

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S.Flat 15x3 mm and nuts & bolts complete.Providing & fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows, all complete with :

7 4.0 mm thick glass panes sqm 130.00 657.75 85,507.50SUB HEAD -VIII FLOORING

1Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding thecost of nosing of steps etc. complete

sqm 125.03 280.05 35,015.44

40 mm thick with 20 mm nominal size stone aggregate

2Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement 3 coarsesand) finished with a floating coat of neat cement. 18mm thick sqm 8.88 258.20 2,292.82

3

40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer28 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey yellowor green marble chips of sizes from 7 mm to 10 mm nominal size, laid in cement marblepowder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cementmarble powder mix : 3 marble chips) by volume, including cement slurry etc. complete :

Medium shade pigment using 50%white cement and 50% ordinary cement sqm 533.16 537.85 2,86,760.11


Amount(Rs.)

4

Marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, toplayer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizesfrom smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marblechips) by volume :18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1cement : 3 coarse sand) :Medium shades pigment using 50% white cement and 50% ordinary cement sqm 53.32 621.90 33,157.22

5

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with greycement slurry mixed with pigment to match the shade of the slab, including rubbing andpolishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick sqm 42.89 945.70 40,561.07

6

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cementslurry mixed with pigment to match the shade of the slabs, including rubbing and polishingcomplete.

sqm 19.72 954.10 18,814.85

7

Providing and fixing Ist quallity ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacture) of approved make in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge inskirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointingin white cement mixed with pigment of matching shade complete.

Sqm 289.20 724.25 2,09,453.10

8Prroviding and laying ceramic tiles if size 300x300 ( thickness to be specified bymanufacturere)------------ with white maching pigment etc. Sqm 105.00 764.55 80,277.75

SUB HEAD -IX ROOFING

1

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat ofneat cement, rounding the edges and making and finishing the outlet complete.

each 12.00 148.75 1,785.00


Amount(Rs.)

2Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming toIS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mmgap for thermal expansion, (i) Single socketed pipes.75 mm diameter metre 15.00 124.90 1,873.50

3

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories forunplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, includingjointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

a Coupler75 mm diameter each 7.00 97.60 683.20

b Single tee without door75x75x75 mm each 8.00 184.70 1,477.60

c Bend 87.5°75 mm bend each 4.00 104.55 418.20

4

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S.screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1cement : 4 coarse sand)and making good the wall etc. complete.75 mm each 15.00 127.15 1,907.25SUB HEAD - X - Finishing

1 12mm cement plaster of mix:1:4( 1 cement : 4 fine sand) sqm 1,596.40 112.50 1,79,595.00

2 15mm cement plaster of mix:1:6 ( 1 cement : 6 fine sand) sqm 1,596.40 130.20 2,07,851.28

318 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 finesand).

sqm 2,517.52 182.90 4,60,454.41

4 6mm cement plaster to ceiling of mix:1:3 (1 cement : 3 fine sand) sqm 982.50 101.00 99,232.50

5

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

per bag of 50 kgcement

usedin the mix

100.00 37.40 3,740.00


Amount(Rs.)

6 Extra for plastering exterior walls of height more than 10 m from ground level for everyadditional height of 3 m or part thereof.

SQM 755.26 28.85 21,789.14

7 White washing with lime to give an even shadeNew work(three or more coats) sqm 982.50 11.75 11,544.38

8 Colour washing such as green, blue or buff to give an even shadeNew work (two or more coats) with a base coat of white washing with lime sqm 600.00 16.15 9,690.00

9Distempering with oil bound washable distemper of approved brand and manufacture togive an even shade :

New work (two or more coats) over and including water tinnable priming coat with cementprimer sqm 3,192.80 66.70 2,12,959.76

10Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade

New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coatof exterior primer applied @ 2.20 kg/ 10 sqm) sqm 2,345.00 80.45 1,88,655.25

11 Applying priming coat

aWith ready mixed pink or Grey primer of approved brand and manufacture on wood work(hard and soft wood) sqm 207.65 25.85 5,367.70

bWith ready mixed red oxide zinc chromate primer of approved brand and manufacture onsteel galvanised iron/ steel works sqm 458.76 20.70 9,496.33

cWith ready mixed red oxide zinc chromate primer of approved brand and manufacture onsteel work (second coat) sqm 458.76 11.40 5,229.86

12Painting with synthetic enamel paint of approved brand and manufacture to give an evenshadeTwo or more coats on new work. sqm 666.41 53.85 35,886.07

13Providing and applying white cement based putty of average thickness 1 mm, of approvedbrand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete.

sqm 4,175.30 76.05 3,17,531.57


Amount(Rs.)

SUB HEAD - XIII WATERPROOFING WORK

1

Providing and laying water proofing treatment to vertical and horizontal surfaces ofdepressed portion of toilet and kitchen and the like consisting of:1). First course of applying cement slurry @ 4.4 Kg. / sq. m. mixed with water proofing

compound, 2). Second course of 20mm Cement plaster 1:3 mixed with WP compound, 3). IIIrd course of appling blown or residual bitumen at 1.7 Kg/Sqm, 4). IVth course of 400 micron PVC sheet

Sqm 83.40 505.90 42,192.06

2

Providing and laying integral cement based water proofing treatment includingpreparation of surface as required for treatment of roofs, balconies, terraces etcconsisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed withwater proofing compound conforming to IS. 2645 and approved by Engineer-in-chargeover the RCC slab including adjoining walls upto 300mm height including cleaning thesurface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm sizewith 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thicklayer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge to required slopeand treating similarly the adjoining walls upto 300 mm height including rounding ofjunctions of walls and slabs

Sqm 499.50 786.70 3,92,956.65


Amount(Rs.)

(c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4coarse sand) admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge including laying glass fibre cloth of approved quality intop layer of plaster and finally finishing the surface with trowel with neat cement slurry andmaking pattern of 300x300 mm square 3mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of twoweeks for curing and for final test. All above operations to be done in order and asdirected and specified by the Engineer-in-Charge :With average thickness of 120mm and minimum thickness at khurra as 65 mm.P/L APP modified prefabricated five layer 3 mm thick waterproofing membrane. Sqm 206.43 422.80 87,276.49

TOTAL DSR-2012 ITEMS (IN Rs.) (A) 140,95,646.40NON SCHEDULE ITEMS

1 Providing and fixing Chicken Wire Mesh at the Joint of RCC & B/w Sqm 750.00 90.00 67,500.002 P/F Magic Eye on Ent Door each 4.00 100.00 400.00

TOTAL NON SCHEDULE ITEMS (B) 67,900.00

(Annexure-II)

SL. NO DESCRIPTION UNIT QTY. Rate

(Rs.)Amount

(Rs.)DSR ITEMS

1

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors whereverrequired :WC pan ISI marked white solid plastic seat and lid Each 12.00 2,885.10 34,621.20

2

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillartaps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require:

aWhite Vitreous China Flat back wash basin size 550x 400 mmwith single 15 mm C.P. brass pillar tap

Each 12.00 1,460.50 17,526.00

3Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings

Each 12.00 894.70 10,736.40

ENGINEERING PROJECTS (INDIA) LIMITED(A GOVERNMENT OF INDIA ENTERPRISE)


b) Internal Sanitary and fittings 1) Sanitary Instalation for Type-V Qtrs.

NERO,Guwahati


(Rs.)Amount

(Rs.)

4

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including paintingof fittings and brackets, cutting and making good the walls whereverrequired :510x1040 mm bowl depth 200 mm Each 8.00 5,640.10 45,120.80

5Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Flexible pipe

a 32 mm dia Each 12.00 65.30 783.60 b 40 mm dia Each 12.00 67.60 811.20

6

Providing and fixing 600x450 mm beveled edge mirror of superior glass (ofapproved quality) complete with 6 mm thick hard board ground fixed towooden cleats with C.P. brass screws and washers complete.

Each

12.00 674.05 8,088.60

7

Providing and fixing 600x120x5mm glass shelf with edges round ofsupported on anodised aluminium angle frame with C.P. brass bracketsand guard rail complete fixed with 40mm long screws,rawl plugs etc.,complete

Each

12.00 341.25 4,095.00

8 Providing and fixing toilet paper holderVitreous china Each 12.00 259.75 3,117.00

9

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with minimum distances of 37 mm from wall face with concealedfittings arrangement of approved quality and colour, weighing not less than88 gms.

Each

12.00 169.85 2,038.20

10Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittings arrangement ofapproved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide andeffective height of 88 mm, weighing not less than 170 gms

Each 12.00 375.70 4,508.40


(Rs.)Amount

(Rs.)

11Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore Each 40.00 61.70 2,468.00

12 Providing and Fixing shower rose with 15 or 20mm inlet150mm diameter Nos. 16.00 77.85 1,245.60

13 Providing and fixing C.P. brass bib cock of approved quality conforming toIS:8931 :a)15 mm nomial bore Nos. 16.00 397.50 6,360.00

14Providing and fixing C.P. brass long nose bib cock of approved qualityconforming to IS standards and weighing not less than 810 gms.

15 mm nominal bore Nos. 20.00 411.40 8,228.00

15Providing and fixing C.P. brass stop cock (concealed) of standard designand of approved make conforming to IS:8931.15 mm nominal bore Nos. 12.00 426.55 5,118.60

16Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931

a) 15 mm nominal bore Nos. 32.00 449.35 14,379.20

17Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.

Nos. 12.00 151.10 1,813.20

TOTAL OF DSR 2012 ITEMS 1,71,059.00

(Annexure-II)


(Rs.)Amount

(Rs.)DSR ITEMS

1

Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittingsincluding fixing the pipe with suports, clamps at 1.00 m spacing. This includes jointingof pipes & fittings with one step CPVC solvent cement and the cost of cutting chasesand making good the same including testing of joints complete as per direction ofEngineer-In-Charge.Concealed work including cutting chases and making good the walls etc.

a 15 mm dia Metre 128.00 218.65 27987.20b 20 mm dia Metre 24.00 243.05 5833.20

2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings with one step CPVC solvent cement and testing of joints complete as perdirection of Engineer in Charge.Internal work - Exposed on wall and terrace

a 15 mm nominal outer dia Pipes Metre 12.00 133.95 1607.40b 20 mm nominal outer dia Pipes Metre 48.00 157.15 7543.20c 25 mm nominal outer dia Pipes Metre 48.00 197.9 9499.20d 32 mm nominal outer dia Pipes Metre 70.00 252.65 17685.503 Providing and Fixing brass Stop Cock of Approved Quality

15 mm nominal bore each 24.00 205.6 4934.40

b) Internal Sanitary and fittings ii) Internal Water supply for Type-V Qtrs.

Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I)including infrastructural development works for Assam Rifles at Srikona, Assam


NERO,Guwahati


(Rs.)Amount

(Rs.)

4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwedend )

a 25 mm nominal bore each 6.00 372.95 2237.70c 32 mm nominal bore. each 6.00 450.90 2705.40

5 Providing and fixing ball valve (brass) of approved quality, High or low pressure, withplastic floats complete :

b 20 mm nominal bore each 8.00 360.2 2881.60

6

Providing and placing on terrace (at all floor levels) polyethylene water storage tank,ISI : 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank.

per litre 8000.00 6.10 48800.00

TOTAL COST OF DSR 2012 ITEMS 1,31,714.80

(Annexure-II)


(Rs.)Amount

(Rs.)DSR ITEMS

1

Excavating trenches of required width for pipes, cables, etc including excavation for sockets,anddressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavatedsoil, and then returning the soil as required, in layers not exceeding 20 cm in depth, includingconsolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soilas directed,within a lead of 50 m :All kinds of soilPipes, cables etc, not exceeding 80 mm dia. Metre 10.00 138.05 1,380.50

2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. kilogram 50.00 77.90 3,895.00

3Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermalexpansion, (i) Single socketed pipes.75 mm diameter Metre 50.00 124.90 6,245.00

4Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticisedRigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal expansion.

a Single Push fit coupler75 mm diameter each 40.00 116.15 4,646.00

b Single Tee with door75x75x75 mm dia each 40.00 207.95 8,318.00

c Bend 87.5 Deg75 mm dia each 10.00 104.55 1,045.50

Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I) including infrastructuraldevelopment works for Assam Rifles at Srikona, Assam.

iii) Internal Drainage for Type-V Qtrs.b) Internal Sanitary and fittings


NERO,Guwahati


(Rs.)Amount

(Rs.)d Shoe (Plain)

75 MM DIA each 10.00 16.80 168.00

5

Providing and Fixing on wall face unplasticised - PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S. screws ofrequired length including cutting brick work and fixing in cement mortar 1:4 (1 Cement: 4 Coarsesand) and making good the walls etc. complete75 mm dia each 16.00 127.15 2,034.40

6 Providing and fixing PTMT grating of approved quality and colour.a Circular typeb 125 mm nominal dia with 25 mm waste hole Nos. 28.00 45.55 1,275.40

7 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar inthe proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

150 mm diameter Metre 15.00 219.05 3 286

8Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

150 mm diameter S.W. pipe Metre 15.00 607.70 9 116

9Providing and fixing square-mouth S.W. gully trap class SP-1 complete withh C.I. grating brickmasonry chamber withh water tight C.I. cover withh frame o f 300 x300 mm size (inside) the weight ofcover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type withh common burnt clay F.P.S. (non modular) bricks of class designation7.5

Nos. 6.00 1602.40 9 614

10

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) withh R.C.C.top slab withh 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominalsize), inside plastering 12 mm thick withh cement mortar 1:3 (1 cement : 3 coarse sand) finishedwithh floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size) finished withh a floating coat of neatcement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover withh frame (light duty) 455x610 mminternal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kgand weight of frame 15 kg) :

a Withh common burnt clay F.P.S. (non-modular ) bricks of class designation 7.5 Nos. 6.00 8634.10 51 805TOTAL OF DSR 2012 ITEMS 1,02,828.05


(Rs.)Amount

(Rs.)NON DSR ITEMS

1

Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with allrequired specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends,double junctions, vent cowls,traps etc. with or without door including cutting masonry or concretefloors, sunshades, etc and making the holes good after finishing the work. wherever necessary andjointing pipes with approved quality resin cement and fixing pipes with MS fixing clampsscrewed on to wooden plugs embedded in masonry wherever required and painting the clampswith two coats of enamel paint over one coat primer. This includes testing of joints complete at alllevels. for waste water lines

110mm or nearest outer dia. RM 100.00 435.00 43,500.00 TOTAL OF NON DSR ITEMS 43,500.00

(Annexure-III)

Sl. No. Description Unit QTY Rate

(Rs.)Amount

(Rs.)SUB HEAD-1: W I R I N G & SUBMAIN

1.0

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable in surface / recessed medium classPVC conduit, with modular switch, modular plate, suitable GI box and earthing thepoint with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc asrequired.Group-B Point 144.00 544.00 78336.00

2.0Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductorsingle core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Metre 216.00 162.00 34992.00

3.0Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSPVC insulated copper conductor, single core cable in surface/ recessed medium classPVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 56.00 131.00 7336.00

4.0 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 44.00 206.00 9064.00

5.0 Supplying and fixing following modular switch/ socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required.

6.0 Bell push Each 4.00 98.50 394.00


NERO,Guwahati

c) Internal Electrification for Type-V Qtrs.


7.0 Supplying and fixing stepped type electronic fan regulator on the existing modularplate switch box including connections but excluding modular plate etc. as required. Each 24.00 322.00 7728.00

8.0 Supplying and fixing modular blanking plate on the existing modular plate & switch boxexcluding modular plate as required. Each 20.00 22.00 440.00

9.0

Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 3 pin 5/6 amps modular socketoutlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to beused in non residential buildings).

Each 68.00 288.00 19584.00

10.0Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modularsocket outlet and 15/16 amps modular switch, connection etc. as required.

Each 36.00 366.00 13176.00

11.0 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. Each 4.00 54.50 218.00

12.0

Installation, testing and commissioning of ceiling fan, including wiring the down rods ofstandard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,single core cable, including providing and fixing phenolic laminated sheet cover on the fanbox etc. as required.

Each 20.00 99.00 1980.00

13.0 Installation of exhaust fan in the existing opening, including making good the damage,connection, testing, commissioning etc. as required.Upto 450 mm sweep Each 16.00 163.00 2608.00

14.0 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 16.00 68.50 1096.00

SUB HEAD -II : DISTRIBUTION BOARD

1.0

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distributionboard, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator)

2+8 Way Double Door Each 4.00 857.00 3428.00

2.0Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuitbreaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required.

Single pole Each 40.00 141.00 5640.00Double Pole each 20.00 379.00 7580.00

3.0 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. asrequired. Each 4.00 5.50 22.00

SUB HEAD - IV : EARTHING & LIGHTNING PROTECTION SYSTEM

1.0Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and wateringpipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Set 6.00 3996.00 23976.00

2.0Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrodeincluding connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. asrequired.

Metre 20.00 364.00 7280.00

3.0 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.as required. Metre 10.00 120.00 1200.00

4.0Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I.tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate includingholes etc. complete as required.

Each 2.00 326.00 652.00

5.0 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any othermetallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 2.00 60.50 121.00

6.0 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall forlightning conductor complete as required.(For horizontal run) Metre 82.00 58.00 4756.00

7.0 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall forlightning conductor complete as required.(For vertical run) Metre 60.00 81.50 4890.00

8.0 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long,with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Each 20.00 58.50 1170.00

9.0 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground asrequired. Metre 100.00 125.00 12500.00

SUB HEAD - V : LIGHTING FIXTURE & FAN

1.0

Installation, testing and commissioning of pre-wired, fluorescent fitting / compactfluorescent fitting of all types, complete with all accessories and tube etc. directly onceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copperconductor, single core cable and earthing etc. as required.

Each 40.00 69.50 2780.00

2.0

Installation, testing and commissioning of ceiling fan, including wiring the down rods ofstandard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor,single core cable, including providing and fixing phenolic laminated sheet cover on the fanbox etc. as required.

Each 24.00 99.00 2376.00

TV TELEPHONE 0.00

3.0Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PEinsulated, shielded with fine tinned copper braid and protected with PVC sheath in theexisting surface/ recessed steel/ PVC conduit as required.

Metre 200.00 22.00 4400.00

4.0Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

0.00

25 mm Metre 40.00 64.50 2580.00

5.0 Supplying and fixing following modular switch/ socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. 0.00

TV antenna socket outlet Each 16.00 93.00 1488.00

6.0 Supplying and fixing following size/ modules, GI box alongwith modular base & coverplate for modular switches in recess etc as required. 0.00

1 or 2 Module (75mmX75mm) Each 12.00 142.00 1704.00 2,65,495.00 TOTAL OF DSR-2012 ITEMS

NON SCHEDULE ITEMSSupply of Light fixture as given below

1.0 Supply of 20W wall mounted LED Batten light Equivalent to Philips, Wipro, Bajaj, Havels. Each 36.00 1049.00 37764.00

2.0 Supply of 10W surface mounted circular LED light Equivalent to Philips, Wipro, Bajaj,Havels. Each 20.00 1800.00 36000.00

3.0 Supply of 12W LED Wall Bracket Light. Equivalent to Philips, Wipro, Bajaj, Havels. Each 8.00 450.00 3600.004.0 Supply of 9W PL Bulk head light. Equivalent to Philips, Wipro, Bajaj, Havels. Each 4.00 724.00 2896.00

5.0 Supply of Ceiling Fan of 1200mm sweep complete erected in position with allaccessories.(Make- Havels) or Equivalent to Orient, Cropton Greave. Each 12.00 2097.00 25164.00

6.0 Supplying of Exhaust Fan Heavy duty 230V A.C 50 cycles 375 mm 1400 RPMcomplete erected in position with all accessories.(Make- Havels) Each 4.00 4400.00 17600.00

1,23,024.00 TOTAL (B) OF NON SCHEDULE ITEMS

(Annexure-IV)

S. No Description Unit Qty. Rate

(Rs.)Amount

(Rs.)SUB HEAD - I EARTH WORK

1

Earth work in excavation in foundation trenches or drains (not exceeding1.5 m in width or 10 sqm on plan) including dressing of sides andramming of bottoms, lift upto 1.5 m, including getting out the excavatedsoil and disposal of surplus excavated soil

cum 270.87 130.80 35,429.53

All kinds of soil

2Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in wateriing, lead uptoto 50m and lift upto 1.5m

cum 157.29 83.80 13,180.57

3 Supplying and filling in plinth with sand under floors including, watering,ramming consolidating and dressing complete. cum 14.53 749.30 10,889.95

4

Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1 m aboveground leveland removal of rubbish upto a distance of 50m outside theperiphery of the area cleared.

100sqm 4.74 482.00 2,284.68

5Supplying chemical emulsion in sealed containers including delivery asspecified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%

Litre 193.78 185.95 36,033.39



A. CIVIL WORKS FOR TYPE-VI QUARTER

NERO,Guwahati


(Rs.)Amount

(Rs.)

6

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONALanti-termite treatment (excluding the cost of chemical emulsion): Alongexternal wall where the apron is not provided using chemical emulsion @7.5 liters / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

metre 172.00 11.80 2,029.60

7

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONALanti-termite treatment (excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ oneliter per hole, 300 mm apart including drilling 12 mm diameter holes andplugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match theexisting : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

sqm 193.78 88.25 17,101.09

SUB HEAD - II CONCRETE WORK

1 Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinth level

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mmnominal size)

cum 40.52 3,888.20 1,57,566.58

2

Providing and laying cement concrete in retaining walls, return walls,walls(any thickness) including attached pilasters, columns, piers, abutments,pillars, posts, struts, buttresses, string or lacing courses, parapets,coping, bed blocks, anchor blocks, plain window sills, fillets etc. up tofloor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) cum 0.71 5,272.40 3,717.04


(Rs.)Amount

(Rs.)

3Providing and laying damp-proof course 40 mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand(zone -III) : 4 graded stoneaggregate 12.5 mm nominal size)

sqm 40.77 207.55 8,461.29

4

Applying a coat of residual petroleum bitumen of penetration VG 10 ofapproved quality using 1.7 kg per square metre on damp proof courseafter cleaning the surface with brushes and finally with a piece of clothlightly soaked in kerosene oil.

sqm 40.77 96.65 3,940.18

5

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal size well rammed andconsolidated and grouted with fine sand including finishing the topsmooth.

sqm 129.00 338.75 43,698.75

SUB HEAD - III RCC WORK

1

Providing and laying in position machine batched and machine mixeddesign mix M-25 grade cement concrete for reinforced cement concretework, using cement content as per approved design mix, includingpumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting ofconcrete, improve workability without impairing strength and durability asper direction of Engineer-in-charge.

All work upto plinth level cum 63.21 5,242.15 3,31,365.48All work upto ROOF level cum 120.70 5,781.50 6,97,809.30

2 Add for using extra cement in items of design mix over and above thespecified cement content therein quintal 100.00 589.8 58,980.00


(Rs.)Amount

(Rs.)

3 Centring and shuttering including strutting, propping etc. andremoval of form for:removal of form for:

a Foundations,footings,bases of columns including beams etc. for massconcrete sqm 254.99 166.90 42,557.83

b Walls ( any thickness) including attached pilasters, butteresses, plinthand string courses etc.

sqm 50.00 378.60 18,930.00

c Suspended floors, roofs, landings, balconies and access platform sqm 313.92 311.20 97,691.90

d Shelves (Cast in situ) sqm 9.72 311.20 3,024.86

e Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 610.81 262.35 1,60,246.27f Columns, pillars, piers, abutments, posts and struts sqm 147.17 365.60 53,804.62g Stairs,(excluding landings) except spiral-staircasess. sqm 26.80 326.30 8,745.92h Weather shade,chajjas,corbels etc inc sqm 13.37 411.10 5,494.35

4

Providing, hoisting and fixing upto floor five level precast reinforcedcement concrete in lintels, beams and bressumers including setting incement mortar 1:3 (1 cement : 3 coarse sand), cost of required centeringand shuttering and finishing smooth with 6 mm thick cement plaster 1:3(1 cement: 3 fine sand) on exposed surfaces but excluding the cost ofreinforcement with 1:2:4 (1 cement: 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size).

cum 3.00 6,754.00 20,262.00

5Steel Reinforcement for R.C.C work including straightening, cutting,bending, placing in position and binding all complete upto plinthlevel Thermo-Mechanically Treated bars of grade Fe 500 D or more Kg 5,000.00 62.25 3,11,250.00


(Rs.)Amount

(Rs.)

6Steel Reinforcement for R.C.C work including straightening, cutting,bending, placing in position and binding all complete above plinth level toroofThermo-Mechanically Treated bars of grade Fe 500 D or more Kg 18,000.00 62.25 11,20,500.00

7 Add or deduct for plaster drip course/ groove in plastered surface ormoulding to R.C.C. projections. metre 122.80 22.25 2,732.30

SUB HEAD -IV BRICKWORK1 Brick work with common burnt clay FPS ( non modular )bricks of class

designation 75 in foundation and plinth in:Cement mortar 1:4( 1 cement : 4 coarse sand ) cum 12.02 3,508.25 42,163.62

2Brick work with common burnt clay FPS ( non modular ) bricks of classdesignation 75 in Superstructure above plinth upto floor V level in allshapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)Cement mortar 1:6(1 cement : 6 coarse sand) cum 77.22 3,876.15 2,99,310.29

3 Half brick masonry with common burnt clay FPS ( non modular ) bricks ofclass designation 7.5 in Superstructure above plinth upto floor V level

Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 159.29 476.85 75,957.44

4 Extra for providing and placing in position 2 Nos. 6mm dia MS bars atevery 3rd course of half brick masonry sqm 159.29 63.20 10,067.13


(Rs.)Amount

(Rs.)SUB HEAD -V MARBLE & GRANITE WORKS

1

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete atall levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra area of slabover 0.50 sqm sqm 4.95 1,980.80 9,804.96

2

Extra for providing edge moulding to 18mm thick marble stonecounters,Vanities etc. over Item No. 8.2 including machine polishing toedge to give high gloss finish etc. complete as per design approved byEngineer-in-ChargeMarble work Metre 13.20 105.70 1,395.24

3Extra for fixing marble /granite stone, over and above correspondingbasic item, in facia and drops of width upto 150 mm with epoxy resinbased adhesive, including cleaning etc.complete.

Metre 0.99 185.80 183.94

4

Extra for providing opening of required size & shape for washbasins/kitchen sink in kitchen platform, vanity counters and similarlocation in marble/stone work including necessary holes for pillar tapsetc .including rubbing and polishing of cut edges etc. complete.

each 2.00 281.80 563.60


(Rs.)Amount

(Rs.)SUB HEAD -VI WOOD & PVC WORKS

1

Providing and fixing ISI marked flush door shutters non -decorative type,core of block board construction with frame of 1st class hard wood andwell matched commercial 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges withnecessary screws.

sqm 33.39 1,578.30 52,699.44

2 Extra for providing lipping with 2nd class teak wood battens 25 mmminimum depth on all edges of shutters (over all area of door shutter tobe measured)

sqm 33.39 325.20 10,858.43

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3layer or graded wood particle board medium density grade I, IS : 3087marked, including top cover of 6 mm commercial ply wood conforming toIS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type)curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S.flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm longetc. all complete.

m 35.70 298.45 10,654.67

3Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete.Fixed to steel windows by welding kg 642.60 90.75 58,315.95

4

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding incement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand:6 graded stone aggregate 20mm nominal size).

each 10.00 96.75 967.50


(Rs.)Amount

(Rs.)

4a Providing and fixing oxidised M.S. Safety chain with necessary fixtures fordoors, (weighting not less than 450 gms). each 1.00 75.45 75.45

5Providing and fixing aluminium sliding door bolts, ISI marked anodisedanodic coating not less than grade AC 10 as per IS : 1868), transparentor dyed to required colour or shade, with nuts and screws etc. complete:300x16mm each 27.00 203.80 5,502.60

6Providing and fixing aluminium tower bolts ISI marked anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyed torequired colour or shade with nuts and screws etc. complete-

a 250 X 10 mm each 27.00 86.45 2,334.15b 200X 10 mm each 27.00 71.05 1,918.35

7Providing and fixing aluminium handles ISI marked anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyed torequired colour or shade with nuts and screws etc. complete-125 mm each 54.00 62.50 3,375.00

8

Providing and fixing aluminium hanging floor door stopper, ISImarked,anodised (anodic coating not less than grade AC 10 as perIS:1868) transparent or dyed to required colour and shade, withnecessary screws etc. complete.

each 27.00 71.55 1,931.85

Twin rubber stopper

9

Providing and fixing factory made PVC door frame of size 50x47 mm witha wall thickness of 5 mm. made out of extruded 5 rigid PVC foam sheetmitred at corners and joined with 2 Nos. of 150 mm long brackets of15x15mm M.S. square tube,the vertical door profiles to be reinforced with19x19 mm M.S. squire tube of 19 guage,EPDM rubber gasket weatherseal to be provided through out the frame. The door frame to be fixed tothe wall using M.S. screws of 65/100 mm size complete as permanufactures specification and direction of Engineer-in-charge

metre 38.85 404.60 15,718.71


(Rs.)Amount

(Rs.)

10

Providing and fixing factory made panel PVC door shuttersfrom M.S.tube of 19 guage thickness, size 19x19 mm for styles and 15x15 mm fortop and bottom rails,covered with heat moulded PVC "C" channel of 5 mmthick and 75 mm wide PVC sheets for top rail,lock rail and bottom rail oneither side and 5 mm thick 20mm wide cross PVC sheet as gap insert fortop rail and bottom rial,panelling of 5mm thick PVC sheet fitted in the M.S.frame welded/sealed to the styles and rails with 5x30mm PVC sheetbeading on either side and joined together with solvent cement adhesiveetc., complete as per manufacture specification and direction of Engineer-in-charge fixed to frames with 4 Nos.M.S. powder coated butt hinges (ForW.C. and bathroom shutters).30 mm thick prelaminated PVC door shutters Sqm 11.03 2,958.00 32,611.95Providing and fixing 18mm thick 150mm wide pelmet of coir veneer board---all complete mts 35.70 406.75 14,520.98

11 Providing and fixing fly proof stainless steel grade 304 wire gauge, towindows and clerestory windows using wire gauge with average width ofaperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

With 12 mm mild steel U beading Sqm 35.70 1,160.30 41,422.71SUB HEAD -VII STEEL WORK

1 Structural steel work in single section fixed without connecting plateincluding cutting hoisting, fixing in position & applying priming coat ofapproved steel primer all complete.

kg 100.00 59.90 5,990.00

2

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40xmmangle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat ofapproved steel primer.Using M.S. angels 40x40x6mm for diagonal braces. sqm 8.10 2,551.45 20,666.75


(Rs.)Amount

(Rs.)3 Providing and fixing factory made ISI marked steel glazed doors, windows

and ventilators, side /top /centre hung, with beading and all memberssuch as F7D, F4B, K11 B and K12 B etc. complete of standard rolledsteel sections, joints mitred and flash butt welded and sash bars tenonedand riveted, including providing and fixing of hinges, pivots, includingpriming coat of approved steel primer, but excluding the cost of otherfittings, complete all as per approved design, (sectional weight of onlysteel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size)

kg 2,489.85 96.30 2,39,772.56

4

Providing and fixing pressed steel door frames conforming to IS:4351,manufactured from commercial mild steel sheet of 1.60 mmthickness,including hinges, jamb, lock jamb, bead and if required anglethreshold of mild steel angle of section 50x25 mm, or base ties of 1.60mm, pressed mild steel welded or rigidly fixed together by mechanicalmeans, including M.S. pressed butt hinges 2.5 mm thick with mortarguards, lock strikeplate and shock absorbers as specified and applying acoat of approved steel primer after pre-treatment of the surface asdirected by Engineer-in-charge:Profile-C Fixing with adjustable lugs with split end tail to each jamb metre 25.20 370.00 9,324.00

Profile E Fixing with adjustable lugs with split end tail to each jamb metre 22.68 404.85 9,182.00


(Rs.)Amount

(Rs.)

5

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box forceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mmthick M.S. sheet with its top surface hacked for proper bonding, top lidshall be screwed into the cast iron/ M.S. sheet box by means of 3.3mmdia. round headed screws, one lock at the corners. Clamp shall be madeof 12mm dia M.S. bar bent to shape as per standard drawing.

each 12.00 117.45 1,409.40

6Steel work welded in built-up section/framed work including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required

In gratings, frames, guard bar, ladders, balcony and staircase railings,brackets, gates and similar works Kg. 957.60 77.90 74,597.04

Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete.Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :

7 4.0 mm thick glass panes sqm 45.27 657.75 29,776.34SUB HEAD -VIII FLOORING

1Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete

sqm 15.50 280.05 4,340.78

40 mm thick with 20 mm nominal size stone aggregate

2 Cement plaster skirting (upto 30cm height) with cement morter 1:3(1cement:3 coarse sand) finished with a floating coat of neat cement. 18mm thick sqm 2.43 258.20 627.43


(Rs.)Amount

(Rs.)

3

40 mm thick marble chips flooring, rubbed and polished to granolithicfinish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and toplayer 12 mm thick with white, black, chocolate, grey yellow or greenmarble chips of sizes from 7 mm to 10 mm nominal size, laid in cementmarble powder mix 3:1 (3 cement : 1 marble powder) by weight inproportion of 2:3 (2 cement marble powder mix : 3 marble chips) byvolume, including cement slurry etc. complete :

Medium shade pigment using 50%white cement and 50% ordinary cement sqm 201.84 537.85 1,08,559.64

4

Marble chips skirting up to 30 cm height, rubbed and polished togranolithic finish, top layer 6 mm thick with white, black, chocolate, grey,yellow or green marble chips of sizes from smallest to 4 mm nominal size,laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) byweight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips)by volume :18 mm thick with under layer 12 mm thick in cement plaster1:3 (1 cement : 3 coarse sand) :

Medium shades pigment using 50% white cement and 50% ordinarycement sqm 20.18 621.90 12,552.43

5

Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shade ofthe slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick sqm 22.14 945.70 20,937.80


(Rs.)Amount

(Rs.)

6

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillarslaid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarsesand) and jointed with grey cement slurry mixed with pigment to match theshade of the slabs, including rubbing and polishing complete.

sqm 26.45 954.10 25,235.95

7

Providing and fixing Ist quallity ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved makein all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge in skirting, risers of steps and dadosover 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand)and jointing with grey cement slurry @ 3.3 kg per sqm including pointingin white cement mixed with pigment of matching shade complete.

Sqm 90.39 724.25 65,464.96

8 Prroviding and laying ceramic tiles if size 300x300 ( thickness to bespecified by manufacturere)------------ with white maching pigment etc. Sqm 29.07 764.55 22,225.47

SUB HEAD -IX ROOFING

1

Making khurras 45x45 cm with average minimum thickness of 5 cmcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarsesand) and a coat of neat cement, rounding the edges and making andfinishing the outlet complete.

each 2.00 148.75 297.50

2

Providing and fixing on wall face unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.75 mm diameter metre 15.00 124.90 1,873.50


(Rs.)Amount

(Rs.)

3

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion

a Coupler75 mm diameter each 7.00 97.60 683.20

b Single tee without door75x75x75 mm each 8.00 184.70 1,477.60

c Bend 87.5°75 mm bend each 4.00 104.55 418.20

4

Providing and fixing unplasticised -PVC pipe clips of approved design tounplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length, includingcutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarsesand)and making good the wall etc. complete.75 mm each 15.00 127.15 1,907.25SUB HEAD - X - Finishing

1 12mm cement plaster of mix:1:46( 1 cement : 4 fine sand) sqm 503.55 112.50 56,649.12

2 15mm cement plaster of mix:1:6 ( 1 cement : 4 fine sand) sqm 503.55 130.20 65,561.92

318 mm cement plaster in two coats under layer 12 mm thick cementplaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thickcement plaster 1:6 (1 cement : 6 fine sand).

sqm 2,115.19 182.90 3,86,868.71

4 6mm cement plaster to ceiling of mix:1:3 (1 cement : 3 fine sand) sqm 400.76 101.00 40,476.76


(Rs.)Amount

(Rs.)

5 Extra for providing and mixing water proofing material in cement plasterwork in proportion recommended by the manufacturers.

per bag of 50 kgcement

usedin the mix

100.00 37.40 3,740.00

6 Extra for plastering exterior walls of height more than 10 m from groundlevel for every additional height of 3 m or part thereof. SQM 634.56 28.85 18,306.99

7 White washing with lime to give an even shadeNew work(three or more coats) sqm 400.76 11.75 4,708.93

8 Colour washing such as green, blue or buff to give an even shade

New work (two or more coats) with a base coat of white washing with lime sqm 600.00 16.15 9,690.00

9 Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade :New work (two or more coats) over and including water tinnable primingcoat with cement primer sqm 1,007.10 66.70 67,173.27

10 Finishing walls with Premium Acrylic Smooth exterior paint with Siliconeadditives of required shade

New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 1,945.19 80.45 1,56,490.74

11 Applying priming coat

a With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 66.78 25.85 1,726.26

b With ready mixed red oxide zinc chromate primer of approved brand andmanufacture on steel galvanised iron/ steel works sqm 190.95 20.70 3,952.67


(Rs.)Amount

(Rs.)

c With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) sqm 190.95 11.40 2,176.83

12 Painting with synthetic enamel paint of approved brand and manufactureto give an even shadeTwo or more coats on new work. sqm 257.73 53.85 13,878.76

13Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

sqm 1,407.86 76.05 1,07,067.41

SUB HEAD - XIII WATERPROOFING WORK

1

Providing and laying water proofing treatment to vertical and horizontalsurfaces of depressed portion of toilet and kitchen and the like consistingof:1) First course of applying cement slurry @ 4.4 Kg. / sq. m. mixed withwater proofing compound,2) Second course of 20mm Cement plaster 1:3 mixed with WP compound, 3) IIIrd course of appling blown or residual bitumen at 1.7 Kg/Sqm, 4) IVth course of 400 micron PVC sheet

Sqm 83.40 505.90 42,192.06


(Rs.)Amount

(Rs.)

2

Providing and laying integral cement based water proofing treatmentincluding preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cementadmixed with water proofing compound conforming to IS. 2645 andapproved by Engineer-in-charge over the RCC slab including adjoiningwalls upto 300mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge over 20 mm thick layer of cement mortarof mix 1:5 (1 cement :5 coarse sand ) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-chargeto required slope and treating similarly the adjoining walls upto 300 mmheight including rounding of junctions of walls and slabs

Sqm 59.82 786.70 47,060.39


(Rs.)Amount

(Rs.)(c) After two days of proper curing applying a second coat of cementslurry using 2.75kg/ sqm of cement admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix1:4 (1 cement :4 coarse sand) admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-charge includinglaying glass fibre cloth of approved quality in top layer of plaster andfinally finishing the surface with trowel with neat cement slurry andmaking pattern of 300x300 mm square 3mm deep.(e) The whole terrace so finished shall be flooded with water for aminimum period of two weeks for curing and for final test. All aboveoperations to be done in order and as directed and specified by theEngineer-in-Charge :With average thickness of 120mm and minimum thickness at khurra as 65mm.P/L APP modified prefabricated five layer 3 mm thick waterproofing membrane. Sqm 206.43 422.80 87,276.49

TOTAL DSR-2012 ITEMS (IN Rs.) (A) 57,32,398.52NON SCHEDULE ITEMS

1 Providing and fixing Chicken Wire Mesh at the Joint of RCC & B/w Sqm 175.00 90.00 15,750.002 P/F Magic Eye on Ent Door each 4.00 100.00 400.00

TOTAL NON SCHEDULE ITEMS (B) 16,150.00

(Annexure-V)


(Rs.)Amount

(Rs.)DSR ITEMS

1 Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever), conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required :WC pan ISI marked white solid plastic seat and lid Each 4.00 2,885.10 11,540.40

2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:

a White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.brass pillar tap Each 5.00 1,460.50 7,302.50

3 Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings Each 5.00 894.70 4,473.50

4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 withC.I. brackets and stainless steel plug 40 mm, including painting of fittings andbrackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 200 mm Each 1.00 5,640.10 5,640.10


b) Internal Sanitary and fittings 1) Sanitary Instalationfor Type-VI Qtrs.


NERO,Guwahati


(Rs.)Amount

(Rs.)5 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste

fittings complete.Flexible pipe

a 32 mm dia Each 25.00 65.30 1,632.50 b 40 mm dia Each 25.00 67.60 1,690.00 6 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.

Each 5.00 674.05 3,370.25

7 Providing and fixing 600x120x5mm glass shelf with edges round of supported onanodised aluminium angle frame with C.P. brass brackets and guard rail completefixed with 40mm long screws,rawl plugs etc., complete

Each 5.00 341.25 1,706.25

8 Providing and fixing toilet paper holderVitreous china Each 4.00 259.75 1,039.00

9 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm widewith minimum distances of 37 mm from wall face with concealed fittings arrangementof approved quality and colour, weighing not less than 88 gms.

Each 5.00 169.85 849.25

10 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleatswith CP brass screws with concealed fittings arrangement of approved quality andcolour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective heightof 88 mm, weighing not less than 170 gms Each 5.00 375.70 1,878.50

11 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length

15 mm nominal bore Each 35.00 61.70 2,159.50 12 Providing and Fixing shower rose with 15 or 20mm inlet

150mm diameter Nos. 4.00 77.85 311.40 13 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

a)15 mm nomial bore Nos. 4.00 397.50 1,590.00


(Rs.)Amount

(Rs.)14 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to

IS standards and weighing not less than 810 gms. -

15 mm nominal bore Nos. 4.00 411.40 1,645.60 15 Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931. -

15 mm nominal bore Nos. 6.00 426.55 2,559.30 16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931 -

a) 15 mm nominal bore Nos. 10.00 449.35 4,493.50 17 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

102mm, height of 75mm with concealed fitting arrangements, weighing not less than106 gms.

Nos. 6.00 151.10 906.60

TOTAL OF DSR 2012 ITEMS 54,788.15

(Annexure-V)

SL. NO DESCRIPTION UNIT QTY. Rate(Rs.)

Amount(Rs.)

DSR ITEMS1 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability

for hot & cold water supply including all CPVC plain & brass threaded fittings including fixingthe pipe with suports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings withone step CPVC solvent cement and the cost of cutting chases and making good the sameincluding testing of joints complete as per direction of Engineer-In-Charge.Concealed work including cutting chases and making good the walls etc.

a 15 mm dia Metre 45.00 218.65 9839.25b 20 mm dia Metre 45.00 243.05 10937.252 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and testing of joints complete as per direction of Engineer inCharge.Internal work - Exposed on wall and terrace

a 15 mm nominal outer dia Pipes Metre 45.00 133.95 6027.75b 20 mm nominal outer dia Pipes Metre 35.00 157.15 5500.25c 25 mm nominal outer dia Pipes Metre 25.00 197.9 4947.50d 32 mm nominal outer dia Pipes Metre 5.00 252.65 1263.25


b) Internal Sanitary and fittings ii) Internal Water supply for Type-VI Qtrs.


NERO,Guwahati

SL. NO DESCRIPTION UNIT QTY. Rate(Rs.)

Amount(Rs.)

3 Providing and Fixing brass Stop Cock of Approved Quality 0.00

15 mm nominal bore each 0.00 205.6 0.004 Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) 0.00

a 25 mm nominal bore each 4.00 372.95 1491.80c 32 mm nominal bore. each 4.00 450.90 1803.605 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic

floats complete :0.00

b 20 mm nominal bore each 8.00 360.2 2881.60

6 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI :12701 marked, with cover and suitable locking arrangement and making necessary holes forinlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 2000.00

6.1 12200.00

TOTAL COST OF DSR 2012 ITEMS 56,892.25

(Annexure-V)


(Rs.)Amount

(Rs.)DSR ITEMS

1

Excavating trenches of required width for pipes, cables, etc including excavationfor sockets, anddressing of sides, ramming of bottoms, depth up to 1.5 m,including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidatingeach deposited layerby ramming, watering, etc. and disposing of surplus excavated soil asdirected,within a lead of 50 m :All kinds of soilPipes, cables etc, not exceeding 80 mm dia. Metre 25.00 138.05 3,451.25

2Steel work welded in built up sections/framed work including cutting hoisting, fixingin position and applying a priming coat of approved steel primer using structuralsteel etc.as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. kilogram 200.00 77.90 15,580.00

3Providing and fixing on wall face unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter Metre 25.00 124.90 3,122.50


b) Internal Sanitary and fittings iii) Internal Drainage for Type-VI Qtrs.


NERO,Guwahati


(Rs.)Amount

(Rs.)

4

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion.

a Single Push fit coupler75 mm diameter each 4.00 116.15 464.60

b Single Tee with door75x75x75 mm dia each 4.00 207.95 831.80

c Bend 87.5 Deg75 mm dia each 4.00 104.55 418.20

d Shoe (Plain)75 MM DIA each 4.00 16.80 67.20

5

Providing and Fixing on wall face unplasticised - PVC pipe clips of approveddesign to unplasticised - PVC rain water pipes by means of 50 x 50 x 50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brickwork and fixing in cement mortar 1:4 (1 Cement: 4 Coarse sand) and making goodthe walls etc. complete75 mm dia each 10.00 127.15 1,271.50

6 Providing and fixing PTMT grating of approved quality and colour. - a Circular type - b 125 mm nominal dia with 25 mm waste hole Nos. 2.00 45.55 91.10

7Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixtureof cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testingof joints etc. complete :

150 mm diameter Metre 4 219 876

8Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bedconcrete as per standard design :

150 mm diameter S.W. pipe Metre 4 608 2 431


(Rs.)Amount

(Rs.)

9

Providing and fixing square-mouth S.W. gully trap class SP-1 complete withh C.I.grating brick masonry chamber withh water tight C.I. cover withh frame o f 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame tobe not less than 2.70 kg as per standard design:

100x100 mm size P type withh common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5

Nos. 2 1 602 3 205

10

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarsesand) withh R.C.C. top slab withh 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering12 mm thick withh cement mortar 1:3 (1 cement : 3 coarse sand) finished withhfloating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finishedwithh a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover withh frame (light duty)455x610 mm internal dimensions, total weight of cover and frame to be not lessthan 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

a Withh common burnt clay F.P.S. (non-modular ) bricks of class designation 7.5 Nos. 2 8 634 17 268TOTAL OF DSR 2012 ITEMS 49,078.15


(Rs.)Amount

(Rs.)NON DSR ITEMS

1

Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cmpressure for lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls,trapsetc. with or without door including cutting masonry or concrete floors, sunshades,etc and making the holes good after finishing the work. wherever necessary andjointing pipes with approved quality resin cement and fixing pipes with MSfixing clamps screwed on to wooden plugs embedded in masonry whereverrequired and painting the clamps with two coats of enamel paint over one coatprimer. This includes testing of joints complete at all levels. for waste water lines

110mm or nearest outer dia. RM 4 435 1,740.00 TOTAL OF Non DSR ITEMS 1,740.00

(Annexure-VI)


(Rs.)Amount

(Rs.)

SUB HEAD-1: WIRING & SUBMAIN1.0 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessedmedium class PVC conduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor singlecore cable etc as required.Group-B Point 0.00 544.00 0.00

2.0 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductorsingle core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing asrequired.

Metre 30.00 162.00 4860.00

3.0 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required.

a 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 18.00 131.00 2358.00b 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 8.00 206.00 1648.00

4.0 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.

Bell push Each 1.00 98.50 98.50


NERO,Guwahati

c) Internal Electrification for Type-VI Qtrs. Name of Works : Construction of 04 (Four) Nos. Type-V Accommodation in 01 blocks of (G+I) and 01 No Type-VI (G+I) includinginfrastructural development works for Assam Rifles at Srikona, Assam


(Rs.)Amount

(Rs.)5.0 Supplying and fixing stepped type electronic fan regulator on the existing

modular plate switch box including connections but excluding modular plate etc. asrequired.

Each 14.00 322.00 4508.00

6.0 Supplying and fixing modular blanking plate on the existing modular plate & switchbox excluding modular plate as required.

Each 29.00 22.00 638.00

7.0 Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 3 pin 5/6 amps modular socketoutlet and 5/6 amps modular switch, connection etc. as required. (For light plugsto be used in non residential buildings).

Each 13.00 288.00 3744.00

8.0 Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modularsocket outlet and 15/16 amps modular switch, connection etc. as required.

Each 7.00 366.00 2562.00

9.0 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Each 1.00 54.50 54.50

10.0 Installation of exhaust fan in the existing opening, including making good thedamage, connection, testing, commissioning etc. as required.Upto 450 mm sweep Each 5.00 163.00 815.00

11.0 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 5.00 68.50 342.50

SUB HEAD -II : DISTRIBUTION BOARD1.0 Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)2+8 Way Double Door Each 4.00 857.00 3428.00

2.0 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCB DBcomplete with connections, testing and commissioning etc. as required.


(Rs.)Amount

(Rs.)a Single pole Each 40.00 141.00 5640.00b Double Pole each 20.00 379.00 7580.00

3.0 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.as required.

Each 4.00 5.50 22.00

SUB HEAD - IV : EARTHING & LIGHTNING PROTECTION SYSTEM1.0 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,

and providing masonry enclosure with cover plate having locking arrangement andwatering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Set 6.00 3996.00 23976.00

2.0 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earthelectrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Metre 20.00 364.00 7280.00

3.0 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connectionsetc. as required.

Metre 10.00 120.00 1200.00

4.0 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long,G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plateincluding holes etc. complete as required.

Each 2.00 326.00 652.00

5.0 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or anyother metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Each 2.00 60.50 121.00

6.0 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall forlightning conductor complete as required.(For horizontal run)

Metre 100.00 58.00 5800.00

7.0 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall forlightning conductor complete as required.(For vertical run)

Metre 100.00 81.50 8150.00

8.0 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mmlong, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete asrequired.

Each 50.00 58.50 2925.00

9.0 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in groundas required.

Metre 150.00 125.00 18750.00


(Rs.)Amount

(Rs.)SUB HEAD - V : LIGHTING FIXTURE & FAN

1.0 Installation, testing and commissioning of pre-wired, fluorescent fitting / compactfluorescent fitting of all types, complete with all accessories and tube etc. directly onceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copperconductor, single core cable and earthing etc. as required.

Each 49.00 69.50 3405.50

2.0 Installation, testing and commissioning of ceiling fan, including wiring the down rodsof standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copperconductor, single core cable, including providing and fixing phenolic laminated sheetcover on the fan box etc. as required.

Each 14.00 99.00 1386.00

TV TELEPHONE 0.003.0 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected withPVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Metre 150.00 22.00 3300.00

4.0 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/recess including cutting the wall and making good the samein case of recessed conduit as required.

0.00

25 mm Metre 100.00 64.50 6450.005.0 Supplying and fixing following modular switch/ socket on the existing modular plate

& switch box including connections but excluding modular plate etc. as required.0.00

TV antenna socket outlet Each 10.00 93.00 930.006.0 Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.0.00

1 or 2 Module (75mmX75mm) Each 16.00 142.00 2272.00 1,24,896.00

NON SCHEDULE ITEMS1.0 Supply of Light fixture as given below2.0 Supply of 20W wall mounted LED Batten light Equivalent to Philips, Wipro, Bajaj,

Havels.Each 18.00 1049.00 18882.00

TOTAL OF DSR-2012 ITEMS


(Rs.)Amount

(Rs.)3.0 Supply of 10W surface mounted circular LED light Equivalent to Philips, Wipro,

Bajaj, Havels.Each 6.00 1800.00 10800.00

4.0 Supply of 12W LED Wall Bracket Light. Equivalent to Philips, Wipro, Bajaj, Havels. Each 20.00 450.00 9000.00

5.0 Supply of 9W PL Bulk head light. Equivalent to Philips, Wipro, Bajaj, Havels. Each 4.00 724.00 2896.006.0 Supply of Ceiling Fan of 1200mm sweep complete erected in position with all

accessories.(Make- Havels) or Equivalent to Orient, Cropton Greave.Each 14.00 2097.00 29358.00

7.0 Supplying of Exhaust Fan Heavy duty 230V A.C 50 cycles 375 mm 1400 RPMcomplete erected in position with all accessories.(Make- Havels)

Each 5.00 4400.00 22000.00

8.0 Supply of 2X 20W wall mounted LED Batten light. Make- Philips, Wipro, Bajaj,Havels.

eACH 18.00 2500.00 45000.00

METER BOARD9.0 Supply, installation, testing and commissioning of front operated, front / back access,

cubicle type, indoor duty, floor / wall / recess / surface mounted (as specified), totallyenclosed dust and vermin proof switchboards / panels with minimum Ingressprotection classification of IP 44, fabricated from 2 mm thick CRCA sheets with dipcoat priming and epoxy powder coated finish. The panel must be suitable for 415volts 3 phase, 4 wire, 50 Hz, system , must be able to withstand symmetrical faultlevel of 50 KA for 1 sec at 415 V and must include all interconnections, earthing andbonding requirements etc. The panel must conform to standards, as required and asgiven below. The Switchboard shall be provided with detachable gland plates for entry of cablesfrom the top / bottom as required.All live accessible parts shall be shrouded and all equipment shall be finger touchproof. The busbars shall be insulated with heat shrinkable sleeves. SMC / DMCshrouds and busbar supports suitably spaced shall be used. Hinged doors withpadlocking facility shall be provided on all outgoing feeders with switch handleslockable in OFF position.The panel shall have aluminium busbars with bar type feeder connections, spacersetc. with full sized neutral.


(Rs.)Amount

(Rs.)Earthing all components, frame etc. to a common internal earth bar of size 25 x 6mm Cu.Panel / Switchboard board design shall be compact and components / accessoriesof compact sizes shall be used to economise the room space available. Employerreserve the right to seek compact items inplace of larger ones.

Incoming1 No. 63 A, TPN, 35 kA, MCCB having Thermal Magnetic Trip Unit with protectionagainst Overload & Short Circuit, 0-63 A Digital Ammeter with inbuilt ASS, 3 Nos.CT 63/5A, class 1.0 for metering and LED Indication Lamp for ON, OFF & TRIP.Bus BarsElectrolytic high conductivity 3P, 4W aluminium conductor bus-bars rated 100 Amps,suitable to withstand symetrical fault level of 35 KA for 1 second at 415 volts andwith necessary heat shrinkable sleeving.Outgoings:8 Nos. 40 A DP MCB 15 KA8 Nos. 10-40 A Single -phase, 2-wire, 220 V AC Digital Energymeter2 Nos. 10A DP MCBMeter Board complete as above and as required. Each 1.00 45000.00 45000.00TOTAL (B) OF NON SCHEDULE ITEMS 1,82,936.00

Sl No.

Description of WorksA/U Quantity Rate

(Rs.)Amount

(Rs.)

External Sewage Line with Septic Tank & Soakpit (Capacity above 100 nos user-1no.)1 Earthwork in excavation by mechanical means (Hydraulic excavation) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqmon plan) including dressingof sides and ramming of bottoms, lift up to 1.5 m including getting out the excavated soil anddisposal of surplus excavated soil as directed within a lead of 50 m

(a) All kinds of soil CUM 66.00 130.80 8632.802 Providing & laying in position 125 thk.cement concrete of specified grade excluding the cost of

centering and shuttering - all works upto Plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 gradedstone aggrgate 40 mm nominal size)

CUM 3.30 3626.15 11966.30

3 Providing & laying in position 100 thk.cement concrete of specified grade excluding the cost ofcentering and shuttering - all works upto Plinth level 1:2:4(1 Cement : 2 coarse sand : 2 gradedstone aggrgate 20 mm nominal size)

CUM 3.30 4514.05 14896.37

4 Providing & laying in position specified grade of reinforces cement concrete excluding the cost ofcentering, shuttering, finishing and reinforcement - all work upto Plinth level

(a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 gradded stonne aggregate 20 mm nominal size) CUM 3.30 5094.85 16813.015 Centering & Shuttering including strutting, propping etc. and removal of form for suspended floors,

roofs, landings, balconies and access platform Sq.M 12.00 311.20 3734.40

6 Reinforcement for R.C.C work including straightening, cutting, bending placing in position andbinding all complete

(a) Themo-Mechanically Treated bars KG 800.00 62.25 49800.00


NERO,Guwahati(Annexure - VII)


Sl No.

Description of WorksA/U Quantity Rate

(Rs.)Amount

(Rs.)

7 Cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 gradded Stone aggregate) finished with afloating Coat of neat cement including cement slurry, but excluding the cost of nosing of steps etccomplete

(a) 50 mm thick with 20 mm nominal size stone aggregate Sq.M 18.00 254.70 4584.608 15 mm cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement

on the rough side of single or half brick wall Sq.M 66.00 186.50 12309.00

9 Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. atall levels in layers not exceeding 20 cm in depth consolidating each deposited layer by rammingand watering, lead upto 50 m and lift up to 1.5 m

CUM 18.00 83.80 1508.40

10 Brick work with common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 infoundation and plinth in:

a) Cement moter 1:6 (1 cement:6 coarse sand) Cum 18.00 3316.55 59697.9011 Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 gradded stonne

aggregate 40 mm nominal size) all round S.W pepes including bed concrete as per standard desing

(a) 150 mm diameter S.W. pipe RM 60.00 607.70 36462.004 Construction of brick masonary chamber of inside dimension 60 cm X 60 cm X 75 cm inside, in

brick work in cement mortar1:4 Each 6.00 5392.90 32357.40

12 Making soack pit 2.5 diameter 3.0 meter dep with 45 X 45 cm dry brick honey camb shaft withbricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as perstandard design a) With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 2.00 15228.15 30456.30

2,83,218.47 TOTAL DSR 2012-Items

Sl No. Description of Works A/U Quantity Rate

(Rs.)Amount

(Rs.)

Approach Path ,Harding and Railing (300.00sqm)1 Earthwork in excavation by mechanical means (Hydraulic excavation) / manual means

in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqmon plan)including dressing of sides and ramming of bottoms, lift up to 1.5 m including gettingout the excavated soil and disposal of surplus excavated soil as directed within a leadof 50 m

(a) All kinds of soil CUM 250.00 130.80 32700.002 Providing & laying 150mm thk.in position cement concrete of specified grade

excluding the cost of centering and shuttering - all works upto Plinth level 1:2:4 (1Cement : 3 coarse sand : 6 graded stone aggrgate 20 mm nominal size)

CUM22.00 3626.15 79775.30

3 Chequerred precast cement concrete tiles 22 mm thick in footpath and couuryard,joints----------- on 20 mm thick bed of cement moter 1:4 (1 cement:4 coarse sand). sqm

150.00 953.20 142980.002,55,455.30

4 Providing and laying of 150 mm compacted thickness with Stone aggregate of 63 to40 mm size including supply of screenings, kankar, moorum, red bajri etc sorting,spreading to template and consolidation with Manualy

CUM22.00 2087.97 45935.34

45,935.34

TOTAL Non Schedule Items

Total DSR Items


NERO,Guwahati(Annexure -VIII)


Sl No.

Description of Works A/U Quantity Rate(Rs.)

Amount(Rs.)

External Water supply line ( 200 .00 M length)1 Supply & laying G.I. pipe complete with GI

a) 65 mm dia nominal Bore RM 175.00 453.55 79371.25b) 50 mm dia nominal Bore RM 25.00 355.95 8898.75

2 Making connection of G.I. distribution brancha) 50 to 80 mm dia nominal Bore Each 5.00 630.15 3150.753 Providing & fixing bras gate CI wheel of approvaed quality.

a) 65 mm dia nominal Bore Each 5.00 1073.25 5366.25b) 50 mm dia nominal Bore Each 2.00 780.60 1561.204 Construction of brick masonary chamber of inside dimension 30 cm X 30 cm X 50 cm Each 4.00 908.95 3635.805 Painting of G.I. pipes & fittings with two coats of

a) 65 mm dia nominal Bore RM 175.00 12.95 2266.25b) 50 mm dia nominal Bore RM 25.00 10.55 263.75

1,04,514.00


NERO,Guwahati(Annexure - IX)


TOTAL DSR Items

Sl No. Description of Works A/U Quantity Rate

(Rs.)Amount

(Rs.)Retaning Wall (75.00 M length, average 2.5 m height)

1

Earthwork, in excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sq.m. on plan) including disposal of excavated earth, lead upto 50 m lift 3.0 m, disposed earth tobe levelled and neatly dressed for a) All kinds of soil

CUM 75.00 130.80 9810.00

2Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation etcin layers not exceeding 20 cm in depth, consolidationg each deposited layer by ramming andwatering lead upto 50 m and lift upto 1.5 m

CUM 22.00 83.80 1843.60

3Providing and laying in position cement concrete 1:3:6 (1 cement : 3 course sand : 6 gradedstone aggregate of 40 mm nominal size) of specified thickness including the cost of centering /shuttering etc complete upto plinth level.

CUM 32.00 3626.15 116036.80

4Providing and laying Random rubble masonry with hard stone including levelling up with cementconcrete 1 : 6 : 12 (1 cement : 6 coarse sand : 12 graded stone aggregate of 20 mm nominalsize) at all levels with cement mortars 1 : 6 (1 cement : 6 coarse sand

CUM 135.00 3059.20 412992.00

5 Providing coping work at the top of the Random rubble masonary wall with PCC 1 : 2 : 4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size). CUM 2.50 4514.05 11285.13

6 Providing pointing work at the wall of random rubble masonary with cement mortor 1:3 (1cement : 3 fine sand) Sq.M 92.00 111.80 10285.60

7 U-PVC pipes 75 dia mm MTR 75.00 67.00 5025.00

5,67,278.13 TOTAL DSR-2012


NERO,Guwahati(Annexure - X)


Sl No.

Description of Works A/U Quantity Rate(Rs.)

Amount(Rs.)

Miscellanous work(Earth cutting )1 Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in

depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 mand lift upto 1.5 m, disposed earth to be levelled and neatly dressed.a) All Kinds of Soil

CUM 2000.00 129.35 258700.00

2 Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 mand lift upto 1.5 m, disposed earth to be levelled and neatly dressed.a) Ordinary rock

CUM 125.00 197.75 24718.75

3 Carriage of earth by mechanical transport including ,unloading and stacking.( up to 1.00Km) cum 1000.00 82.23 82230.004 Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in

layers not exceeding 20 cm in depth, consolidationg each deposited layer by ramming and wateringlead upto 50 m and lift upto 1.5 m

CUM 1000.00 83.80 83800.00

TOTAL DSR-2012 Items 4,49,448.75


NERO,Guwahati(Annexure - XI)


Documents

VOLUME–IIIengineeringprojects.com/Tender/UploadFiles/3565_BOQ.pdf · 2018. 7. 30. · A.2 Non-Schedule Items 4,35,250.00 B.1 DSR-2012 Items with 28% CI 21,24,690.74 B.2 Non-Schedule