Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
VOLUME 02 OF
PLUMBING DRAINAGE, FIREFIGTING,
SWIMMING POOL AND SOLAR WATER
HEATING
A
PHOTO
A1.01 APARTMENT WC DESCRIPTION
WC Suite Consisting of P-
Trap Rimless WC Pan Close
Couple Cistern with With top
flush fitting & Heavy Duty soft
close toilet seat.Pex-225 angle
valve 1/2"x1/2", 4" pan
connector and 1/2"x1/2"as
PEX-222-30 and flexible c.p
connector. To as Duravit
DURASTYLE ECO or
equal and approved
A1.02 DSQ WC
WC close couple with dual
flush cistern, soft close seat
and cover, Pex-225 angle valve
1/2"x1/2", 4" pan connector
and 1/2"x1/2"as PEX-222-30
and flexible c.p connector. TO
BE AS NOVA EROS or equal
and approved.
ENGINEERS SANITARYWARE FITTINGS AND
ACCESSORIES - SCHEDULE
The Schedule below is just guide for the bidder to
understand the type and the quality of fitting expected
in the bid. Please note the table below will be the bench
mark for evaluation purposes.
Page 1 of Vol 02
A1.03 CLOAKROOM MIRROR
Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch
Tempered glass.
Bevel: 1” beveled edge
A1.04 CLOAK ROOM WHB
Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated
bottle-trap complete with
waste fitting. To be as
KAIGFAN CODE: 71662L/R
or equal and approved.
A1.05 STANDARD BATHROOM MIRROR
Frameless Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch
Tempered glass
Bevel: 1” beveled edge
A1.06 BATHROOM WHB
Wall-hung basin
Size:520X445X395mm Fixing
to wall with back
1No 32mm chrome plated l
bottle-trap complete with
waste fittings. To be as
KAIGFAN CODE: 8021 or
equal and approved
Page 2 of Vol 02
A1.07 MASTER MIRROR
Frameless Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch
Tempered glass
Bevel: 1” beveled edge
A1.08 MASTER WHB
Double acrylic Wash Hand
Basin complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l
bottle-trap complete with
waste fittings. As TEKWISE
equal and approve
A1.09 MIXER FOR ALL 4 WHB ABOVE
WashHand basin mixer as
TAPIS MACHHIATO or
equal and approved
Complete with 2No 1/2'' flex
pipes, 2No angle valve
1/2"x1/2",
A1.10 DSQ MIRROR
Polished Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
Page 3 of Vol 02
A1.11 DSQ AND MULTIPURPOSE WHB
Wash hand basin 450x340mm
1 t/h No. LW241CJ with half
wall pedestal with fixing
crews,, Pex-225 angle valve
1/2"x1/2", chrome plated bottle
trap and waste fittings.
A1.12 DSQ AND MULTIPURPOSE TAP
Pillar tap complete with 1/2''
angle valves and flexible pipe
connection as tapis or equal
and approved.
A1.13 SHOWER KIT
4-way concealed shower mixer
with diverter, stainless steel
Round shower head 200mm
with 400mm stainless steel arm
and bath spout as TAPIS
MACHHIATO or equal and
approved.
A1.14 BATHTUB
White Acrylic Freestanding
Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated
Combine waste/overflow chain
fittings as KAIGFAN KA-
51572A cat.WHO-74SS or
equal and approved
A1.15 BATHTUB FLOOR MOUNTED MIXER
Floor standing faucet and
shower as KAIGFAN CODE:
K-C15242 or equal and
approved
A1.16 INSTANT SHOWER-DSQ AND MULTI.
Instant shower for salty water
(white)
INCLUDING FACTORY
MADE ARM as
LORENZETTI or equal and
approved
Page 4 of Vol 02
A1.17 SHOWER STOP cork-DSQ AND MULTI.
Shower stop cork as tapis or
equal and approved
A1.18 BIB TAP-DSQ AND MULTI.
Bip-tap as tapis or equal and
approved
A1.19 3 BR KITCHEN SINK
Double bowl single drainer
Ultra Deep Bowl Stainless
Steel Kitchen Sink
(LEFT HAND BOWL) 2No
32mm chrome plated l bottle-
trap complete with waste
fittings as FRANKE or equal
and approved
A1.20 2 BR KITCHEN SINK
Double bowl single drainer
Ultra Deep Bowl Stainless
Steel Kitchen Sink (RIGHT
HAND BOWL)
2No 32mm chrome plated l
bottle-trap complete with
waste fittings FRANKE or
equal and approved
A1.21 KITCHEN SINK MIXER
Sink mounted swivel/rigid
gooseneck pillar kitchen mixer
Complete with 2No 1/2'' flex
pipes as Tapis or equal and
approved
Page 5 of Vol 02
A1.22 UTILITY SINK FAUCET
Single hole single temperature
wall mount faucet with
polished chrome plated brass
body, 6" swivel/rigid
gooseneck with stream
regulator outlet, compression
cartridge with spring check,
lever handle and 1/2" NPT
female inlet as tapis or equal
and approved. 32mm chrome
plated l bottle-trap complete
with waste fittings
A1.23 COMMON AREA URINALS
Urinal bowls as Duravit D-
code cat no. 082930007 or
equal and approved complete
with 1NO. divider as duravit or
equal and approved, 32mm
Chrome plated hinged domed
outlet grating, 32mm chrome
plated urinal bottle-trap,
Complete with a Concealed
flush valve as docol or Equal
and approved
A1.24 SHOWER DRAIN GRATINGS
Stainless steel floor trap
grating diameter 100mm
Page 6 of Vol 02
A1.25 TOILET ROLL HOLDERS
Chrome plated Toilet Roll
holder
Size:140X90X30mm as
LARSD
CODE: GC5151 or equal and
approved
A1.26 TOILET ROLL HOLDERS FOR DSQ
Chrome plated toilet roll
holder
A1.27 TOWEL RING
Chrome plated Towel Ring
Size:200X84X29mm as
LARSD
CODE: GC5160 or equal and
approved
A1.28 TOILET BRUSH
Toilet Brush
Size:373X118X113mm as
LARSD
CODE: GC5157 or equal and
approved
A1.29 SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as
LARSD
CODE: GC5100 series
60 cm or equal and approved
A1.30 SHOWER BASKET
Chrome plated Shower Basket
Size:265X165X60mm as
LARSD
CODE: 103B or equal and
approved
A1.31 TOWEL HOOK- GYM AND RESTAURANT
Chrome plated Towel hook
Size:265X165X60mm as
LARSD
CODE: 103B 60 cm or equal
and approved
Page 7 of Vol 02
B
ITEM
PHOTO DESCRIPTION BIDDERS
PROPOSED
BRAND AND
MODEL
COUNTY OF
ORIGIN
A1.01 APARTMENT WC
A1.02 DSQ WC
A1.03 CLOAKROOM MIRROR
A1.04 CLOAK ROOM WHB
A1.05 STANDARD BATHROOM MIRROR
A1.06 BATHROOM WHB
Technical product catalogues and specifications for quoted fitting MUST
BIDDERS PROPOSED SANITARY FITTINGS ( All Bidders MUST fill
Page 8 of Vol 02
A1.07 MASTER MIRROR
A1.08 MASTER WHB
A1.09 MIXER FOR ALL 4 WHB ABOVE
A1.10 DSQ MIRROR
A1.11 DSQ AND MULTIPURPOSE WHB
A1.12 DSQ AND MULTIPURPOSE TAP
A1.13 SHOWER KIT
Page 9 of Vol 02
A1.14 BATHTUB
A1.15 BATHTUB FLOOR MOUNTED MIXER
A1.16 INSTANT SHOWER-DSQ AND MULTI.
A1.17 SHOWER STOP cork-DSQ AND MULTI.
A1.18 BIB TAP-DSQ AND MULTI.
A1.19 3 BR KITCHEN SINK
A1.20 2 BR KITCHEN SINK
Page 10 of Vol 02
A1.21 KITCHEN SINK MIXER
A1.22 UTILITY SINK FAUCET
A1.23 COMMON AREA URINALS
A1.24 SHOWER DRAIN GRATINGS
A1.25 TOILET ROLL HOLDERS
A1.26 TOILET ROLL HOLDERS FOR DSQ
A1.27 TOWEL RING
Page 11 of Vol 02
A1.28 TOILET BRUSH
A1.29 SHOWER TOWEL RAIL-60CM
A1.30 SHOWER BASKET
A1.31 TOWEL HOOK- GYM AND RESTAURANT
Page 12 of Vol 02
MECHANICAL INSTALLATIONS
A1Sanitaryware & Fittings - Supply and FIX
ONLY
Item Description Qty Rate Amount (
Ksh)
A1.01
APARTMENTS WC WC
Suite Consisting of P-Trap Rimless WC Pan
Close Couple Cistern with With top flush
fitting & Heavy Duty soft close toilet seat.Pex-
225 angle valve 1/2"x1/2", 4" pan connector
and 1/2"x1/2"as PEX-222-30 and flexible c.p
connector. To as Duravit DURASTYLE ECO
or equal and approved
4
A1.02
DSQ WC WC
close couple with dual flush cistern, soft close
seat and cover, Pex-225 angle valve 1/2"x1/2",
4" pan connector and 1/2"x1/2"as PEX-222-30
and flexible c.p connector. TO BE AS NOVA
EROS or equal and approved.
1
A1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
4
A1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 1
A1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
4
Supply and Fix only the following sanitaryware &
fittings including all materials and jointings to
supply, waste and overflow pipe fittings.ALL RATES
ARE VAT INCL
Block A Bedroom+DSQ
Page 14 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A1.06
MASTER WASHHAND BASIN
Double acrylic Wash Hand Basin complete
with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap
complete with waste fittings. As TEKWISE
C/W mixer as TAPIS MACHHIATO or equal
and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve
1
A1.07
CLOAK ROOM WHB Counter
top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap
complete with waste fitting. To be as
KAIGFAN CODE: 71662L/R C/W mixer as
TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
1
A1.08
STANDARD BATHROOM WHB
Counter top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap
complete with waste fitting. To be as
KAIGFAN CODE: 71662L/R C/W mixer as
TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
2
Page 15 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A1.09
DSQ AND MULTIPURPOSE WHBDSQ
Wash hand basin 450x340mm 1 t/h No.
LW241CJ with half wall pedestal with fixing
crews,, Pex-225 angle valve 1/2"x1/2", chrome
plated bottle trap and waste fittings. C/W Pillar
tap complete with 1/2'' angle valves and flexible
pipe connection as tapis or equal and approved.
1
A1.10
CLOAK ROOM -
Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
1
A1.11
STANDARD BATHROOM MIRROR
Frameless Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
2
A1.12
MASTER BATHROOM MIRROR
Frameless Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
1
Page 16 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A1.13
DSQ MIRROR Polished
Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
1
A1.14
SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
3
A1.15
ROBE HOOK Chrome
plated Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approved
5
A1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
5
A1.17
3 BR UNIT KITCHEN SINK
Double bowl single drainer Ultra Deep Bowl
Stainless Steel Kitchen Sink
(LEFT HAND BOWL) 2No 32mm chrome
plated l bottle-trap complete with waste fittings
as FRANKE Sink mounted swivel/rigid
gooseneck pillar kitchen mixer as Tapis or
equal and approved Complete with 2No 1/2''
flex pipes or equal and approved
1
Page 17 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A1.18
2 BR UNIT KITCHEN SINK
Double bowl single drainer Ultra Deep Bowl
Stainless Steel Kitchen Sink (RIGHT HAND
BOWL)
2No 32mm chrome plated l bottle-trap
complete with waste fittings FRANKE or equal
and approved Sink mounted swivel/rigid
gooseneck pillar kitchen mixer as Tapis or
equal and approved Complete with 2No 1/2''
flex pipes or equal and approved
0
A1.19
BATH TUB White
Acrylic Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine
waste/overflow chain fittings as KAIGFAN KA-
51572A cat.WHO-74SS. Floor standing faucet
and shower as KAIGFAN CODE: K-C15242
or equal and approved
1
A1.20
SHOWER FITTINGS
4-way concealed shower mixer with diverter,
stainless steel Round shower head 200mm with
400mm stainless steel arm and bath spout as
TAPIS
MACHHIATO or equal and approved.
3
A1.21
DSQ SHOWER; Instant
shower for salty water (white)
INCLUDING FACTORY MADE ARM as
LORENZETTI C/W Shower stop cork as tapis
or equal and approved or equal and approved
1
A1.22
SOAP BASKET
Chrome plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
5
A1.23 Bip-tap as tapis or equal and approved 1
Page 18 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A1.24
UTILITY SINK FAUCET
Single hole single temperature wall mount
faucet with polished chrome plated brass body,
6" swivel/rigid gooseneck with stream regulator
outlet, compression cartridge with spring check,
lever handle and 1/2" NPT female inlet as tapis
or equal and approved. 32mm chrome plated l
bottle-trap complete with waste fittings
1
A1.25
URINAL Urinal bowls as Duravit D-code cat
no. 082930007 or equal and approved complete
with 1NO. divider as duravit or equal and
approved, 32mm Chrome plated hinged domed
outlet grating, 32mm chrome plated urinal
bottle-trap, Complete with a Concealed flush
valve as docol or Equal and approved
0
A1.26Sub Total For Supply and Fix only of
Sanitary Fittings for 1No. Unit cf to Block A
Page 19 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A2
Item Description Qty Rate Amount (
Ksh)
A2.01 50mm bore water pipes 4
A2.02 40mm ditto 0
A2.03 32mm ditto 28
A2.04 25mm ditto 74
A2.05 20mm ditto 42
A2.06 15mm ditto 8
A2.07 50mm bends and elbows 0
A2.08 40mm ditto 0
A2.09 32mm ditto 10
A2.10 25mm ditto 18
A2.11 20mm ditto 18
A2.12 15mm ditto 7
A2.13 50mm Tee 1
A2.14 40mm ditto 0
A2.15 32mm ditto 3
A2.16 25mm Tee 3
A2.17 20mm ditto 3
A2.18 15mm ditto 0
A2.19 50x32x50mm reducer 1
A2.20 32x25x32mm reducer 2
A2.21 32x20x32mm reducer 3
A2.22 32x15mm reducer 0
A2.23 25x20x25mm reducer 12
A2.24 25x15x25mm ditto 10
A2.25 20x15x20mm ditto 5
A2.26 50mm non-return valve as Pegler 0
A2.27 40mm ditto 0
A2.28 32mm ditto 0
A2.29 25mm ditto 0
A2.30 20mm ditto 0
A2.31 15mm ditto 0
A2.32 50mm gate valve as Pegler 0
A2.33 40mm ditto 0
A2.34 32mm ditto 2
A2.35 25mm ditto 6
A2.36 20mm ditto 0
Internal Plumbing - SUPPLY AND INSTALL
Supply and Install the following in PPR-C PN20
Block A Bedroom+DSQ
Page 20 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A2.37 15mm ditto 0
A2.38 50mm pipe sockets 2
A2.39 40mm ditto 0
A2.40 32mm ditto 15
A2.41 25mm ditto 37
A2.42 20mm ditto 18
A2.43 15mm ditto 10
A2.44 50mm pipe Union 1
A2.45 40mm ditto 0
A2.46 32mm ditto 10
A2.47 25mm ditto 3
A2.48 20mm ditto 12
A2.49 15mm ditto 3
A2.50 50 x 40mm male pipe adaptor 0
A2.51 32x25mm ditto 4
A2.52 25x20mm ditto 6
A2.53 20x15mm ditto 18
A2.54 50 x 40mm female pipe adaptor 0
A2.55 32x25mm ditto 8
A2.56 25x20mm ditto 8
A2.57 20x15mm ditto 12
A2.58 32 x 1" Transition fittings 4
A2.59 20 x 3/4" ditto 0
A2.60 15 x 1/2" ditto 8
A2.61
15mm diameter 300mm long flexible
connectors complete with chrome plated stop
cork
15
A2.62
20mm diameter 300mm long flexible
connectors complete with chrome plated stop
cork
1
A2.6315mm screw thread nipple complete with 2No.
Back nut0
A2.6425mm screw thread nipple complete with 2No.
Back nut0
Page 21 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A2.65 50mm float/ball valve 0
A2.6650mm long screw thread nipple complete with
2No. Back nut0
A2.67
Water check meter
32mm Dispalcement or Velocity Water check
meters, ISO 9001 certified Type approval
certificate (either according to EN ISO 4064
from 2005 or 2014, or OIML R49 from 2003 or
2013). Required Certificates
- Manufacturer’s authorization
- KEBS certificate
1
A2.68Testing & Commissioning: including the
sterilisation and flushing, 1
A2.69Sub - total for Internal plumbing c/f to
Block A price collection page
Page 22 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A3
Block A 3 bedroom +dsq
Item Description
A3.01 125mm HDPE waste pipes 0
A3.02 100mm HDPE waste pipes 32
A3.03 70mm ditto 2
A3.04 60mm ditto 3
A3.05 56mm ditto 28
A3.06 100mm Access bend 0
A3.07 125mm HDPE BRANCH SWEPT 0
A3.08 100mm HDPE BRANCH SWEPT 5
A3.09 125X125X60mm HDPE Branch 0
A3.10 100X100X70mm HDPE Branch 1
A3.11 100X100X60mm HDPE Branch 1
A3.12 100X100X56mm HDPE Branch 6
A3.13 70X70X60mm HDPE Branch 1
A3.14 60X60X60mm HDPE Branch 1
A3.15 56X56X56mm HDPE Branch 7
A3.16 100x100mm HDPE bends 6
A3.17 60x60mm ditto 6
A3.18 56x56mm ditto 39
A3.19 125X100mm reducer 0
A3.20 100x90mm reducer 5
A3.21 70x56mm ditto 2
A3.22 60x56mm ditto 3
A3.23 100x100mm fusion connector 5
A3.24 70mm ditto 1
A3.25 60mm ditto 1
A3.26 56mm ditto 6
A3.27100mm diameter Vent cowl and Weathering
slate to suite 100mm Hdpe pipe0
A3.28 100 x 56 x 56 mm 2 way HDPE floor trap c/w
stainless steel gratting and cover.11
A3.2990x90mm bend with long leg and seal for WC
connection5
A3.30 110mm HDPE Solvent fitting RO
A3.31Sub -Total For Foul drainage c/f to Block A
price collection page VAT INCL
Foul Drainage works -SUPPLY AND INSTALL
Supply and install the following in HDPE Tech Soil
Block A
Page 23 of Vol 02
Item Description Qty Rate Amount (
Ksh)
A1 Sanitaryware & Fittings - Supply and Fix only
A2 Internal Plumbing
A3 Internal drainage
A4 Contingency Sum 20,000
A5
Sub Total For Sanitary Fittings - Supply
and Fix only, Internal Plumbing and
Drainage works for 1No Unit
A6
Sub Total For Sanitary Fittings - Supply
and Fix only, Internal Plumbing and
Drainage works for 64No Unit C/F to
VOLUME 02 summary PAGE
UNI
TS64
Block A Price Collection Page
Page 24 of Vol 02
MECHANICAL INSTALLATIONS
B1
Supply and Fix only the following
sanitaryware & fittings including all
materials and jointings to supply, waste and
overflow pipe fittings
Block B 3 Bedrm+Dsq 2Bedrm
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B1.01
APARTMENTS WC WC Suite Consisting of P-
Trap Rimless WC Pan Close Couple Cistern with
With top flush fitting & Heavy Duty soft close
toilet seat.Pex-225 angle valve 1/2"x1/2", 4" pan
connector and 1/2"x1/2"as PEX-222-30 and
flexible c.p connector. To as Duravit
DURASTYLE ECO or equal and approved
4 3
B1.02
DSQ WC close couple with dual flush cistern, soft
close seat and cover, Pex-225 angle valve
1/2"x1/2", 4" pan connector and 1/2"x1/2"as PEX-
222-30 and flexible c.p connector. TO BE AS
NOVA EROS or equal and approved.
1
1
B1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
4 3
B1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 1 0
B1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
4
B1.06
MASTER WASHHAND BASIN Double
acrylic Wash Hand Basin complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete
with waste fittings. As TEKWISE C/W mixer as
TAPIS MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve
1 0
Sanitaryware & Fittings - SUPPLY AND FIX ONLY
Page 24 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B1.07
CLOAK ROOM WHB Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete
with waste fitting. To be as KAIGFAN CODE:
71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
1 1
B1.08
STANDARD BATHROOM WHB
Counter top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete
with waste fitting. To be as KAIGFAN CODE:
71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
2 2
B1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash
hand basin 450x340mm 1 t/h No. LW241CJ with
half wall pedestal with fixing crews,, Pex-225
angle valve 1/2"x1/2", chrome plated bottle trap
and waste fittings. C/W Pillar tap complete with
1/2'' angle valves and flexible pipe connection as
tapis or equal and approved.
1 0
B1.10
CLOAK ROOM - Frameless Bevel Edged
Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
1
1
B1.11
STANDARD BATHROOM MIRROR
Frameless Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
2
2
Page 25 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B1.12
MASTER BATHROOM MIRROR Frameless
Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
1 0
B1.13
DSQ MIRROR Polished Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
1 0
B1.14
SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
3 2
B1.15
ROBE HOOK Chrome plated Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approve
5 3
B1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
6 4
B1.17
3 BR UNIT KITCHEN SINK Double
bowl single drainer Ultra Deep Bowl Stainless
Steel Kitchen Sink
(LEFT HAND BOWL) 2No 32mm chrome plated
l bottle-trap complete with waste fittings as
FRANKE Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and
approved Complete with 2No 1/2'' flex pipes or
equal and approved
1 0
Page 26 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B1.18
2 BR UNIT KITCHEN SINK Double
bowl single drainer Ultra Deep Bowl Stainless
Steel Kitchen Sink (RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete
with waste fittings FRANKE or equal and
approved Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and
approved Complete with 2No 1/2'' flex pipes or
equal and approved
0 1
B1.19
BATH TUB White Acrylic Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine
waste/overflow chain fittings as KAIGFAN KA-
51572A cat.WHO-74SS. Floor standing faucet and
shower as KAIGFAN CODE: K-C15242 or
equal and approved
1 0
B1.20
SHOWER FITTINGS
4-way concealed shower mixer with diverter,
stainless steel Round shower head 200mm with
400mm stainless steel arm and bath spout as
TAPIS
MACHHIATO or equal and approved.
3 2
B1.21
DSQ SHOWER; Instant
shower for salty water (white)
INCLUDING FACTORY MADE ARM as
LORENZETTI C/W Shower stop cork as tapis or
equal and approved or equal and approved
1 0
Page 27 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B1.22
SOAP BASKET Chrome
plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
5 2
B1.23 Bip-tap as tapis or equal and approved 1 1
B1.24
UTILITY SINK FAUCET Single hole single
temperature wall mount faucet with polished
chrome plated brass body, 6" swivel/rigid
gooseneck with stream regulator outlet,
compression cartridge with spring check, lever
handle and 1/2" NPT female inlet as tapis or equal
and approved. 32mm chrome plated l bottle-trap
complete with waste fittings
1 1
B1.25
URINAL Urinal bowls as Duravit D-code cat
no. 082930007 or equal and approved complete
with 1NO. divider as duravit or equal and
approved, 32mm Chrome plated hinged domed
outlet grating, 32mm chrome plated urinal bottle-
trap, Complete with a Concealed flush valve as
docol or Equal and approved
0 0
B1.26Sub Total For Supply and Fix only of Sanitary
Fittings c/f to Block B price collection page1unit
Page 28 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B2 Internal Plumbing - SUPPLY AND INSTALL
Block B 3 Bedrm+Dsq 2Bedrm
Item Description
Rates
(Kshs.) VAT
INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B2.01 50mm bore water pipes 4 4
B2.02 40mm ditto 0 0
B2.03 32mm ditto 28 16
B2.04 25mm ditto 74 66
B2.05 20mm ditto 42 36
B2.06 15mm ditto 8 6
B2.07 50mm bends and elbows 0 0
B2.08 40mm ditto 0 0
B2.09 32mm ditto 10 8
B2.10 25mm ditto 18 21
B2.11 20mm ditto 18 26
B2.12 15mm ditto 7 7
B2.13 50mm Tee 1 1B2.14 40mm ditto 0 0B2.15 32mm ditto 3 3
B2.16 25mm Tee 3 8
B2.17 20mm ditto 3 8
B2.18 15mm ditto 0 0
B2.19 50x32x50mm reducer 1 1
B2.20 32x25x32mm reducer 2 2
B2.21 32x20x32mm reducer 3 3
B2.22 32x15mm reducer 0 0
B2.23 25x20x25mm reducer 12 12
B2.24 25x15x25mm ditto 10 10
B2.25 20x15x20mm ditto 5 5
B2.26 50mm non-return valve as Pegler 0 0
B2.27 40mm ditto 0 0
B2.28 32mm ditto 0 1
B2.29 25mm ditto 0 2
B2.30 20mm ditto 0 0
B2.31 15mm ditto 0 0
Supply and Install the following in PPR-C PN20 (Polypropylene Random
Copolymer) iternal water pipework systems with fittings fixed and welding to
be in accordance to the manufacturer’s printed instructions as described. All
PPR-C bends,Tees,reducing Tees,reducers etc. are to be formed in
accordance to the manufacturer’s printed instructions. The installations to
have the various sizes of connectors, adaptors, sockets, reducers holdbats,
clips, grating, covers etc. as required for satisfactory functions.All pipes for
hot water to be insulated using Almaflex insulator or equal and approved.
Page 29 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B2.32 50mm gate valve as Pegler 0 0
B2.33 40mm ditto 0 0
B2.34 32mm ditto 2 1
B2.35 25mm ditto 6 2
B2.36 20mm ditto 0 0
B2.37 15mm ditto 0 0
B2.38 50mm pipe sockets 2 1
B2.39 40mm ditto 0 0
B2.40 32mm ditto 15 2
B2.41 25mm ditto 37 33
B2.42 20mm ditto 18 12
B2.43 15mm ditto 10 8
B2.44 50mm pipe Union 1 1
B2.45 40mm ditto 0 0
B2.46 32mm ditto 10 3
B2.47 25mm ditto 3 3
B2.48 20mm ditto 12 8
B2.49 15mm ditto 3 3
B2.50 50 x 40mm male pipe adaptor 0 0
B2.51 32x25mm ditto 4 4
B2.52 25x20mm ditto 6 6
B2.53 20x15mm ditto 18 13
B2.54 50 x 40mm female pipe adaptor 0 0
B2.55 32x25mm ditto 8 6
B2.56 25x20mm ditto 8 6
B2.57 20x15mm ditto 12 10
B2.58 32 x 1" Transition fittings 4 2
B2.59 20 x 3/4" ditto 0 0
B2.60 15 x 1/2" ditto 8 6
B2.61
15mm diameter 300mm long flexible
connectors complete with chrome plated stop
cork
15 15
B2.62
20mm diameter 300mm long flexible
connectors complete with chrome plated stop
cork
1 1
Page 30 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B2.6315mm screw thread nipple complete with
2No. Back nut0 0
B2.6425mm screw thread nipple complete with
2No. Back nut0 0
B2.65 50mm float/ball valve 0 0
B2.6650mm long screw thread nipple complete with
2No. Back nut0 0
B2.67
Water check meter
32mm Dispalcement or Velocity Water check
meters, ISO 9001 certified Type approval
certificate (either according to EN ISO 4064
from 2005 or 2014, or OIML R49 from 2003
or 2013). Required Certificates
- Manufacturer’s authorization
- KEBS certificate
1 1
B2.68
Testing & Commissioning: Allow for the
sterilisation and flushing, setting to work,
testing and commissioning.
1 1
B2.69Sub - total for Internal plumbing c/f to
Block B price collection page 1 1
Page 31 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B3Foul Drainage works -SUPPLY AND
INSTALL
Block B 3 Bedrm+Dsq 2Bedrm
Item Description
Rates
(Kshs.)
VAT
INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B3.01 125mm HDPE waste pipes - 4
B3.02 100mm HDPE waste pipes 32 17
B3.03 70mm ditto 2 -
B3.04 60mm ditto 3 7
B3.05 56mm ditto 28 9
B3.06 100mm Access bend - -
B3.07 125mm HDPE BRANCH SWEPT - 1
B3.08 100mm HDPE BRANCH SWEPT 5 1
B3.09 125X125X60mm HDPE Branch - 1
Supply and install the following in HDPE Tech Soil and waste systems to BS EN 1519 with fittings
fixed in accordance to the manufacturer’s printed instructions and BS EN 12056 and
manufactured by as described. All HDPE branches, Tees, reducing Tees, reducers, cover,
gratings,clips, etc. are to be formed in accordance to the manufacturer’s printed instruction. The
installations to have the various sizes of connectors, adaptors, sockets, reducers holdbats, clips
etc. as required for satisfactory functions.
Page 32 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
B3.10 100X100X70mm HDPE Branch 1 -
B3.11 100X100X60mm HDPE Branch 1 1
B3.12 100X100X56mm HDPE Branch 6 6
B3.13 70X70X60mm HDPE Branch 1 -
B3.14 60X60X60mm HDPE Branch 1 -
B3.15 56X56X56mm HDPE Branch 7 6
B3.16 100x100mm HDPE bends 6 3
B3.17 60x60mm ditto 6 5
B3.18 56x56mm ditto 39 11
B3.19 125X100mm reducer - 1
B3.20 100x90mm reducer 5 3
B3.21 70x56mm ditto 2 -
B3.22 60x56mm ditto 3 3
B3.23 100x100mm fusion connector 5 3
B3.24 70mm ditto 1 -
B3.25 60mm ditto 1 1
B3.26 56mm ditto 6 3
B3.27100mm diameter Vent cowl and Weathering
slate to suite 100mm Hdpe pipe - -
B3.28 100 x 56 x 56 mm 2 way HDPE floor trap
c/w stainless steel gratting and cover. 11 7
B3.2990x90mm bend with long leg and seal for WC
connection 5 3
B3.30 110mm HDPE Solvent fitting RO -
B3.31Sub Total For Internal drainage c/f to
Block B price collection page 1 1
Page 33 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
Block B Price Collection Page
B1Sanitaryware & Fittings - SUPPLY & FIX
ONLY
B2 Internal Plumbing
B3 Internal drainage
B4 Contingency Sum 20,000
B5
Sub Total For Sanitary Fittings -Supply
and Fix only, Internal Plumbing and
Drainage works
B6
Sub Total For Sanitary FittingsSupply and
Fix only , Internal Plumbing and Drainage
works VAT INCL CF toVOLUME 02
summary PAGE
UNITS 32 64
Page 34 of Vol 02
MECHANICAL INSTALLATIONS
C1 Sanitaryware & Fittings - SUPPLY AND FIX ONLY
SUPPLY AND Fix only the following sanitaryware & fittings including
all materials and jointings to supply, waste and overflow pipe fittings
Block C
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C1.01
APARTMENTS WC WC Suite Consisting of P-Trap
Rimless WC Pan Close Couple Cistern with With top flush fitting &
Heavy Duty soft close toilet seat.Pex-225 angle valve 1/2"x1/2", 4" pan
connector and 1/2"x1/2"as PEX-222-30 and flexible c.p connector. To as
Duravit DURASTYLE ECO or equal and approved
3 3
C1.02
DSQ WC WC close couple with dual flush cistern, soft close seat and
cover, Pex-225 angle valve 1/2"x1/2", 4" pan connector and 1/2"x1/2"as
PEX-222-30 and flexible c.p connector. TO BE AS NOVA EROS or
equal and approved.
1
0
C1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
3 3
C1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 1 0
C1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
4 3
C1.06
MASTER WASHHAND BASIN Double acrylic Wash Hand Basin
complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete with waste fittings. As
TEKWISE C/W mixer as TAPIS MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2", equal and approve
- 0
C1.07
CLOAK ROOM WHB Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with waste fitting. To be
as KAIGFAN CODE: 71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2", equal and approve or
equal and approved
1 1
C1.08
STANDARD BATHROOM WHB Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with waste fitting. To be
as KAIGFAN CODE: 71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2", equal and approve or
equal and approved
2 2
C1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash hand basin
450x340mm 1 t/h No. LW241CJ with half wall pedestal with fixing
crews,, Pex-225 angle valve 1/2"x1/2", chrome plated bottle trap and
waste fittings. C/W Pillar tap complete with 1/2'' angle valves and flexible
pipe connection as tapis or equal and approved.
1 0
2 Bedrm+Dsq 2 Bedrm No Dsq
Page 37 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C1.10
CLOAK ROOM - Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
1
1
C1.11
STANDARD BATHROOM MIRROR Frameless Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
2
2
C1.12
MASTER BATHROOM MIRROR Frameless Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
0
C1.13
DSQ MIRROR Polished Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
1
0
C1.14
SHOWER TOWEL RAIL-60CM Chrome plated
Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
2 2
C1.15
ROBE HOOK Chrome plated Towel hook Size:265X165X60mm as
LARSD
CODE: 103B 60 cm or equal and approve
4 3
C1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
5 4
Page 38 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C1.17
3 BR UNIT KITCHEN SINK Double bowl single drainer Ultra
Deep Bowl Stainless Steel Kitchen Sink
(LEFT HAND BOWL) 2No 32mm chrome plated l bottle-trap complete
with waste fittings as FRANKE Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and approved Complete with 2No
1/2'' flex pipes or equal and approved
0 0
C1.18
2 BR UNIT KITCHEN SINK Double bowl single drainer Ultra
Deep Bowl Stainless Steel Kitchen Sink (RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete with waste fittings
FRANKE or equal and approved Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and approved Complete with 2No
1/2'' flex pipes or equal and approved
1 1
C1.19
BATH TUB White Acrylic Freestanding Bath Size: 1500 by 720 x
610mm Complete with chrome plated Combine waste/overflow chain
fittings as KAIGFAN KA-51572A cat.WHO-74SS. Floor standing faucet
and shower as KAIGFAN CODE: K-C15242 or equal and approved
0 0
C1.20
SHOWER FITTINGS 4-way concealed
shower mixer with diverter, stainless steel Round shower head 200mm
with 400mm stainless steel arm and bath spout as TAPIS
MACHHIATO or equal and approved.
2 2
C1.21
DSQ SHOWER; Instant shower for salty water
(white)
INCLUDING FACTORY MADE ARM as LORENZETTI C/W Shower
stop cork as tapis or equal and approved or equal and approved
1 0
C1.22
SOAP BASKET Chrome plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved 3 2
C1.23 Bip-tap as tapis or equal and approved 1 1
C1.24
UTILITY SINK FAUCET Single hole single temperature
wall mount faucet with polished chrome plated brass body, 6" swivel/rigid
gooseneck with stream regulator outlet, compression cartridge with spring
check, lever handle and 1/2" NPT female inlet as tapis or equal and
approved. 32mm chrome plated l bottle-trap complete with waste fittings
1 1
C1.25
URINAL Urinal bowls as Duravit D-code cat no. 082930007 or equal
and approved complete with 1NO. divider as duravit or equal and
approved, 32mm Chrome plated hinged domed outlet grating, 32mm
chrome plated urinal bottle-trap, Complete with a Concealed flush valve as
docol or Equal and approved
0 0
C1.26Sub Total For Supply and Fix only of Sanitary Fittings c/f to Block C
price collection page1 Unit
Page 39 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C2 Internal Plumbing - SUPPLY AND INSTALL
Supply and Install the following in PPR-C PN20 (Polypropylene Random
Copolymer) iternal water pipework systems with fittings fixed and
welding to be in accordance to the manufacturer’s printed instructions as
described. All PPR-C bends,Tees,reducing Tees,reducers etc. are to be
formed in accordance to the manufacturer’s printed instructions. The
installations to have the various sizes of connectors, adaptors, sockets,
reducers holdbats, clips, grating, covers etc. as required for satisfactory
functions.All pipes for hot water to be insulated using Almaflex insulator
or equal and approved.
Block c
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C2.01 50mm bore water pipes 4 4
C2.02 40mm ditto 0 0
C2.03 32mm ditto 27 16
C2.04 25mm ditto 76 66
C2.05 20mm ditto 41 36
C2.06 15mm ditto 7 6
C2.07 50mm bends and elbows 0 0
C2.08 40mm ditto 0 0
C2.09 32mm ditto 9 8
C2.10 25mm ditto 24 21
C2.11 20mm ditto 30 26
C2.12 15mm ditto 8 7
C2.13 50mm Tee 1 1
C2.14 40mm ditto 0 0
C2.15 32mm ditto 3 3
C2.16 25mm Tee 9 8
C2.17 20mm ditto 9 8
C2.18 15mm ditto 0 0
C2.19 50x32x50mm reducer 1 1
C2.20 32x25x32mm reducer 2 2
C2.21 32x20x32mm reducer 3 3
C2.22 32x15mm reducer 0 0
C2.23 25x20x25mm reducer 14 12
C2.24 25x15x25mm ditto 12 10
C2.25 20x15x20mm ditto 6 5
C2.26 50mm non-return valve as Pegler 0 0
C2.27 40mm ditto 0 0
C2.28 32mm ditto 1 1
C2.29 25mm ditto 2 2
C2.30 20mm ditto 0 0
C2.31 15mm ditto 0 0
C2.32 50mm gate valve as Pegler 0 0
C2.33 40mm ditto 0 0
C2.34 32mm ditto 1 1
C2.35 25mm ditto 2 2
C2.36 20mm ditto 0 0
C2.37 15mm ditto 0 0
C2.38 50mm pipe sockets 1 1
2 Bedrm No Dsq 2 Bedrm+Dsq
Page 40 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C2.39 40mm ditto 0 0
C2.40 32mm ditto 2 2
C2.41 25mm ditto 38 33
C2.42 20mm ditto 14 12
C2.43 15mm ditto 9 8
C2.44 50mm pipe Union 2 1
C2.45 40mm ditto 0 0
C2.46 32mm ditto 3 3
C2.47 25mm ditto 3 3
C2.48 20mm ditto 9 8
C2.49 15mm ditto 3 3
C2.50 50 x 40mm male pipe adaptor 0 0
C2.51 32x25mm ditto 5 4
C2.52 25x20mm ditto 7 6
C2.53 20x15mm ditto 15 13
C2.54 50 x 40mm female pipe adaptor 0 0
C2.55 32x25mm ditto 7 6
C2.56 25x20mm ditto 7 6
C2.57 20x15mm ditto 12 10
C2.58 32 x 1" Transition fittings 2 2
C2.59 20 x 3/4" ditto 0 0
C2.60 15 x 1/2" ditto 7 6
C2.6115mm diameter 300mm long flexible connectors complete with chrome
plated stop cork10 15
C2.6220mm diameter 300mm long flexible connectors complete with chrome
plated stop cork1 1
C2.63 15mm screw thread nipple complete with 2No. Back nut 0 0
C2.64 25mm screw thread nipple complete with 2No. Back nut 0 0
C2.65 50mm float/ball valve 0 0
C2.66 50mm long screw thread nipple complete with 2No. Back nut 0 0
C2.67
Water check meter
32mm Dispalcement or Velocity Water check meters, ISO 9001 certified
Type approval certificate (either according to EN ISO 4064 from 2005 or
2014, or OIML R49 from 2003 or 2013). Required Certificates
- Manufacturer’s authorization
- KEBS certificate
1 1
C2.68Testing & Commissioning: Allow for the sterilisation and flushing, setting
to work, testing and commissioning.1 1
C2.69 Sub - total for Internal plumbing c/f to Block C price collection page 1 1
Page 41 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C3 Foul Drainage works -SUPPLY AND INSTALL
Block C
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
C3.01 125mm HDPE waste pipes 4 4
C3.02 100mm HDPE waste pipes 21 17
C3.03 70mm ditto 0 0
C3.04 60mm ditto 9 7
C3.05 56mm ditto 14 9
C3.06 100mm Access bend 0 0
C3.07 125mm HDPE BRANCH SWEPT 1 1
C3.08 100mm HDPE BRANCH SWEPT 2 1
C3.09 125X125X60mm HDPE Branch 1 1
C3.10 100X100X70mm HDPE Branch 0 0
C3.11 100X100X60mm HDPE Branch 2 1
C3.12 100X100X56mm HDPE Branch 7 6
C3.13 70X70X60mm HDPE Branch 0 0
C3.14 60X60X60mm HDPE Branch 0 0
C3.15 56X56X56mm HDPE Branch 7 6
C3.16 100x100mm HDPE bends 4 3
C3.17 60x60mm ditto 6 5
C3.18 56x56mm ditto 18 11
C3.19 125X100mm reducer 1 1
C3.20 100x90mm reducer 4 3
C3.21 70x56mm ditto 0 0
C3.22 60x56mm ditto 4 3
C3.23 100x100mm fusion connector 4 3
C3.24 70mm ditto 0 0
C3.25 60mm ditto 2 1
C3.26 56mm ditto 4 3
C3.27100mm diameter Vent cowl and Weathering slate to suite 100mm Hdpe
pipe0 0
C3.28 100 x 56 x 56 mm 2 way HDPE floor trap c/w stainless steel gratting and
cover.8 7
C3.29 90x90mm bend with long leg and seal for WC connection 4 3
C3.30 110mm HDPE Solvent fitting 0 0
C3.31 Sub Total For Internal drainage c/f to Block C price collection page 1 1
2 Bedrm No Dsq 2 Bedrm+Dsq
Supply and install the following in HDPE Tech Soil and waste systems to BS EN 1519 with fittings fixed in accordance to the
manufacturer’s printed instructions and BS EN 12056 and manufactured by as described. All HDPE branches, Tees, reducing
Tees, reducers, cover, gratings,clips, etc. are to be formed in accordance to the manufacturer’s printed instruction. The
installations to have the various sizes of connectors, adaptors, sockets, reducers holdbats, clips etc. as required for satisfactory
functions.
Page 42 of Vol 02
Item Description
Rates
(Kshs.)
VAT INCL
Qty Costs
(Kshs.) Qty
Costs
(Kshs.)
Block C Price Collection Page
C1 Sanitaryware & Fittings - SUPPLY & FIX ONLY
C2 Internal Plumbing
C3 Internal drainage
C4 Contingency Sum 16,000
C5Sub Total For Sanitary Fittings - Supply and Fix only, Internal
Plumbing and Drainage works
C6
Sub Total For Sanitary Fittings - Supply and Fix only , Internal
Plumbing and Drainage works VAT INCL C/F VOLUME 02
summary PAGE
UNITS 62 2
Page 43 of Vol 02
MECHANICAL INSTALLATIONS
D1Sanitaryware & Fittings - SUPPLY AND FIX
ONLY
Block D
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D1.01
APARTMENTS WC WC Suite
Consisting of P-Trap Rimless WC Pan Close Couple
Cistern with With top flush fitting & Heavy Duty soft
close toilet seat.Pex-225 angle valve 1/2"x1/2", 4" pan
connector and 1/2"x1/2"as PEX-222-30 and flexible c.p
connector. To as Duravit DURASTYLE ECO or
equal and approved
3 3
D1.02
DSQ WC WC close
couple with dual flush cistern, soft close seat and cover,
Pex-225 angle valve 1/2"x1/2", 4" pan connector and
1/2"x1/2"as PEX-222-30 and flexible c.p connector.
TO BE AS NOVA EROS or equal and approved.
1
0
D1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
3 3
D1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 1 0
D1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
4 3
2 Bedrm+Dsq 2 Bedrm no
Dsq
Supply and Fix only the following sanitaryware & fittings including all materials and jointings to
supply, waste and overflow pipe fittings
Page 49 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D1.06
MASTER WASHHAND BASIN Double acrylic
Wash Hand Basin complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete with
waste fittings. As TEKWISE C/W mixer as TAPIS
MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve
- 0
D1.07
CLOAK ROOM WHB Counter top
basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with
waste fitting. To be as KAIGFAN CODE: 71662L/R
C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
1 1
D1.08
STANDARD BATHROOM WHB
Counter top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with
waste fitting. To be as KAIGFAN CODE: 71662L/R
C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
2 2
D1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash hand
basin 450x340mm 1 t/h No. LW241CJ with half wall
pedestal with fixing crews,, Pex-225 angle valve
1/2"x1/2", chrome plated bottle trap and waste fittings.
C/W Pillar tap complete with 1/2'' angle valves and
flexible pipe connection as tapis or equal and approved.
1 0
D1.10
CLOAK ROOM -
Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
1
1
D1.11
STANDARD BATHROOM MIRROR Frameless
Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
2
2
Page 50 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D1.12
MASTER BATHROOM MIRROR Frameless Bevel
Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
0
D1.13
DSQ MIRROR Polished Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
1
0
D1.14
SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
2 2
D1.15
ROBE HOOK Chrome plated Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approve
4 3
D1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
5 4
D1.17
3 BR UNIT KITCHEN SINK Double bowl
single drainer Ultra Deep Bowl Stainless Steel Kitchen
Sink
(LEFT HAND BOWL) 2No 32mm chrome plated l
bottle-trap complete with waste fittings as FRANKE
Sink mounted swivel/rigid gooseneck pillar kitchen
mixer as Tapis or equal and approved Complete with
2No 1/2'' flex pipes or equal and approved
0 0
D1.18
2 BR UNIT KITCHEN SINK Double bowl
single drainer Ultra Deep Bowl Stainless Steel Kitchen
Sink (RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete with
waste fittings FRANKE or equal and approved Sink
mounted swivel/rigid gooseneck pillar kitchen mixer as
Tapis or equal and approved Complete with 2No 1/2''
flex pipes or equal and approved
1 1
Page 51 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D1.19
BATH TUB White Acrylic Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine waste/overflow
chain fittings as KAIGFAN KA-51572A cat.WHO-
74SS. Floor standing faucet and shower as KAIGFAN
CODE: K-C15242 or equal and approved
0 0
D1.20
SHOWER FITTINGS 4-
way concealed shower mixer with diverter, stainless
steel Round shower head 200mm with 400mm stainless
steel arm and bath spout as TAPIS
MACHHIATO or equal and approved.
2 2
D1.21
DSQ SHOWER; Instant shower
for salty water (white)
INCLUDING FACTORY MADE ARM as
LORENZETTI C/W Shower stop cork as tapis or
equal and approved or equal and approved
1 0
D1.22
SOAP BASKET Chrome
plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
3 2
D1.23 Bip-tap as tapis or equal and approved 1 1
D1.24
UTILITY SINK FAUCET Single hole
single temperature wall mount faucet with polished
chrome plated brass body, 6" swivel/rigid gooseneck
with stream regulator outlet, compression cartridge
with spring check, lever handle and 1/2" NPT female
inlet as tapis or equal and approved. 32mm chrome
plated l bottle-trap complete with waste fittings
1 1
D1.25
URINAL Urinal bowls as Duravit D-code cat no.
082930007 or equal and approved complete with 1NO.
divider as duravit or equal and approved, 32mm
Chrome plated hinged domed outlet grating, 32mm
chrome plated urinal bottle-trap, Complete with a
Concealed flush valve as docol or Equal and approved
0 0
D1.26Sub Total For Supply and Fix onlyof Sanitary
Fittings c/f to Block D price collection page1 Unit
Page 52 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D2 Internal Plumbing - SUPPLY AND INSTALL
Block D
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D2.01 50mm bore water pipes 4 4
D2.02 40mm ditto 0 0
D2.03 32mm ditto 27 16
D2.04 25mm ditto 76 66
D2.05 20mm ditto 41 36
D2.06 15mm ditto 7 6
D2.07 50mm bends and elbows 0 0
D2.08 40mm ditto 0 0
D2.09 32mm ditto 9 8
D2.10 25mm ditto 24 21
D2.11 20mm ditto 30 26
D2.12 15mm ditto 8 7
D2.13 50mm Tee 1 1
D2.14 40mm ditto 0 0
D2.15 32mm ditto 3 3
D2.16 25mm Tee 9 8
D2.17 20mm ditto 9 8
D2.18 15mm ditto 0 0
D2.19 50x32x50mm reducer 1 1
D2.20 32x25x32mm reducer 2 2
D2.21 32x20x32mm reducer 3 3
D2.22 32x15mm reducer 0 0
D2.23 25x20x25mm reducer 14 12
Supply and Install the following in PPR-C PN20 (Polypropylene Random Copolymer) iternal water
pipework systems with fittings fixed and welding to be in accordance to the manufacturer’s printed
instructions as described. All PPR-C bends,Tees,reducing Tees,reducers etc. are to be formed in
accordance to the manufacturer’s printed instructions. The installations to have the various sizes of
connectors, adaptors, sockets, reducers holdbats, clips, grating, covers etc. as required for
satisfactory functions. All pipes for hot water to be insulated using Almaflex insulator or equal and
approved.
2 Bedrm+Dsq 2 Bedrm No
Dsq
Page 53 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D2.24 25x15x25mm ditto 12 10
D2.25 20x15x20mm ditto 6 5
D2.26 50mm non-return valve as Pegler 0 0
D2.27 40mm ditto 0 0
D2.28 32mm ditto 1 1
D2.29 25mm ditto 2 2
D2.30 20mm ditto 0 0
D2.31 15mm ditto 0 0
D2.32 50mm gate valve as Pegler 0 0
D2.33 40mm ditto 0 0
D2.34 32mm ditto 1 1
D2.35 25mm ditto 2 2
D2.36 20mm ditto 0 0
D2.37 15mm ditto 0 0
D2.38 50mm pipe sockets 1 1
D2.39 40mm ditto 0 0
D2.40 32mm ditto 2 2
D2.41 25mm ditto 38 33
D2.42 20mm ditto 14 12
D2.43 15mm ditto 9 8
D2.44 50mm pipe Union 2 1
D2.45 40mm ditto 0 0
D2.46 32mm ditto 3 3
D2.47 25mm ditto 3 3
D2.48 20mm ditto 9 8
D2.49 15mm ditto 3 3
D2.50 50 x 40mm male pipe adaptor 0 0
D2.51 32x25mm ditto 5 4
D2.52 25x20mm ditto 7 6
D2.53 20x15mm ditto 15 13
D2.54 50 x 40mm female pipe adaptor 0 0
D2.55 32x25mm ditto 7 6
D2.56 25x20mm ditto 7 6
D2.57 20x15mm ditto 12 10
D2.58 32 x 1" Transition fittings 2 2
D2.59 20 x 3/4" ditto 0 0
D2.60 15 x 1/2" ditto 7 6
D2.6115mm diameter 300mm long flexible connectors
complete with chrome plated stop cork10 15
D2.6220mm diameter 300mm long flexible connectors
complete with chrome plated stop cork1 1
D2.6315mm screw thread nipple complete with 2No. Back
nut0 0
D2.6425mm screw thread nipple complete with 2No. Back
nut0 0
Page 54 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D2.65 50mm float/ball valve 0 0
D2.6650mm long screw thread nipple complete with 2No.
Back nut0 0
D2.67
Water check meter
32mm Dispalcement or Velocity Water check meters,
ISO 9001 certified Type approval certificate (either
according to EN ISO 4064 from 2005 or 2014, or
OIML R49 from 2003 or 2013). Required Certificates
- Manufacturer’s authorization
- KEBS certificate
1 1
D2.68
Testing & Commissioning: Allow for the sterilisation
and flushing, setting to work, testing and
commissioning.
1 1
D2.69Sub - total for Internal plumbing c/f to Block D
price collection page 1 1
Page 55 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D3 Foul Drainage works -SUPPLY AND INSTALL
Block D
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D3.01 125mm HDPE waste pipes 4 4
D3.02 100mm HDPE waste pipes 21 17
D3.03 70mm ditto 0 0
D3.04 60mm ditto 9 7
D3.05 56mm ditto 14 9
D3.06 100mm Access bend 0 0
D3.07 125mm HDPE BRANCH SWEPT 1 1
D3.08 100mm HDPE BRANCH SWEPT 2 1
D3.09 125X125X60mm HDPE Branch 1 1
D3.10 100X100X70mm HDPE Branch 0 0
D3.11 100X100X60mm HDPE Branch 2 1
D3.12 100X100X56mm HDPE Branch 7 6
D3.13 70X70X60mm HDPE Branch 0 0
D3.14 60X60X60mm HDPE Branch 0 0
D3.15 56X56X56mm HDPE Branch 7 6
D3.16 100x100mm HDPE bends 4 3
D3.17 60x60mm ditto 6 5
D3.18 56x56mm ditto 18 11
D3.19 125X100mm reducer 1 1
D3.20 100x90mm reducer 4 3
D3.21 70x56mm ditto 0 0
D3.22 60x56mm ditto 4 3
2 Bedrm+Dsq 2 Bedrm No
Dsq
Supply and install the following in HDPE Tech Soil and waste systems to BS EN 1519 with fittings
fixed in accordance to the manufacturer’s printed instructions and BS EN 12056 and manufactured
by as described. All HDPE branches, Tees, reducing Tees, reducers, cover, gratings,clips, etc. are to
be formed in accordance to the manufacturer’s printed instruction. The installations to have the
various sizes of connectors, adaptors, sockets, reducers holdbats, clips etc. as required for
satisfactory functions.
Page 56 of Vol 02
Item Description Rates
(Kshs.) Qty
Costs
(Kshs.) Qty
Costs
(Kshs.)
D3.23 100x100mm fusion connector 4 3
D3.24 70mm ditto 0 0
D3.25 60mm ditto 2 1
D3.26 56mm ditto 4 3
D3.27100mm diameter Vent cowl and Weathering slate to
suite 100mm Hdpe pipe0 0
D3.28 100 x 56 x 56 mm 2 way HDPE floor trap c/w stainless
steel gratting and cover.8 7
D3.2990x90mm bend with long leg and seal for WC
connection4 3
D3.30 110mm HDPE Solvent fitting 0 0
D3.31Sub Total For Internal drainage c/f to Block D
price collection page 1 1
Block D Price Collection Page
D1 Sanitaryware & Fittings - Supply and Fix only
D2 Internal Plumbing
D3 Internal drainage
D4 Contingency Sum 16,000
D5Sub Total For Supply and Fix only, Internal
Plumbing and Drainage works VAT INCL
D6
Sub Total For Sanitary Fittings - Spply Only,
Sanitary Fittings - Fix Only , Internal Plumbing and
Drainage works VAT INCL C/F VOLUME 02
summary PAGE
UNITS 62 2
Page 57 of Vol 02
MECHANICAL INSTALLATIONS
E1Sanitaryware & Fittings - SUPPLY AND FIX
ONLY
CareTaker HSE
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E1.01
APARTMENTS WC WC Suite Consisting of P-
Trap Rimless WC Pan Close Couple Cistern with
With top flush fitting & Heavy Duty soft close toilet
seat.Pex-225 angle valve 1/2"x1/2", 4" pan connector
and 1/2"x1/2"as PEX-222-30 and flexible c.p
connector. To as Duravit DURASTYLE ECO or
equal and approved
0
E1.02
DSQ WC WC close couple with dual flush cistern,
soft close seat and cover, Pex-225 angle valve
1/2"x1/2", 4" pan connector and 1/2"x1/2"as PEX-
222-30 and flexible c.p connector. TO BE AS NOVA
EROS or equal and approved.
1
Supply and Fix only the following sanitaryware & fittings including all materials
and jointings to supply, waste and overflow pipe fittings
Page 60 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
0
E1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 1
E1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
0
E1.06
MASTER WASHHAND BASIN Double
acrylic Wash Hand Basin complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete with
waste fittings. As TEKWISE C/W mixer as TAPIS
MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve
-
E1.07
CLOAK ROOM WHB Counter top
basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with
waste fitting. To be as KAIGFAN CODE: 71662L/R
C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
1
E1.08
STANDARD BATHROOM WHB
Counter top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with
waste fitting. To be as KAIGFAN CODE: 71662L/R
C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
0
Page 61 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash
hand basin 450x340mm 1 t/h No. LW241CJ with
half wall pedestal with fixing crews,, Pex-225 angle
valve 1/2"x1/2", chrome plated bottle trap and waste
fittings. C/W Pillar tap complete with 1/2'' angle
valves and flexible pipe connection as tapis or equal
and approved.
0
E1.10
CLOAK ROOM -
Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
0
E1.11
STANDARD BATHROOM MIRROR Frameless
Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
1
E1.12
MASTER BATHROOM MIRROR Frameless
Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
E1.13
DSQ MIRROR Polished Edged
Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
0
Page 62 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E1.14
SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
1
E1.15
ROBE HOOK Chrome plated
Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approve
1
E1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
0
E1.17
3 BR UNIT KITCHEN SINK Double bowl
single drainer Ultra Deep Bowl Stainless Steel
Kitchen Sink
(LEFT HAND BOWL) 2No 32mm chrome plated l
bottle-trap complete with waste fittings as FRANKE
Sink mounted swivel/rigid gooseneck pillar kitchen
mixer as Tapis or equal and approved Complete with
2No 1/2'' flex pipes or equal and approved
0
Page 63 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E1.18
2 BR UNIT KITCHEN SINK Double bowl
single drainer Ultra Deep Bowl Stainless Steel
Kitchen Sink (RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete with
waste fittings FRANKE or equal and approved Sink
mounted swivel/rigid gooseneck pillar kitchen mixer
as Tapis or equal and approved Complete with 2No
1/2'' flex pipes or equal and approved
1
E1.19
BATH TUB White Acrylic
Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine
waste/overflow chain fittings as KAIGFAN KA-
51572A cat.WHO-74SS. Floor standing faucet and
shower as KAIGFAN CODE: K-C15242 or equal
and approved
0
E1.20
SHOWER FITTINGS 4-
way concealed shower mixer with diverter, stainless
steel Round shower head 200mm with 400mm
stainless steel arm and bath spout as TAPIS
MACHHIATO or equal and approved.
0
E1.21
DSQ SHOWER; Instant
shower for salty water (white)
INCLUDING FACTORY MADE ARM as
LORENZETTI C/W Shower stop cork as tapis or
equal and approved or equal and approved
1
E1.22
SOAP BASKET Chrome
plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
1
E1.23 Bip-tap as tapis or equal and approved 1
Page 64 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E1.24
UTILITY SINK FAUCET Single hole
single temperature wall mount faucet with polished
chrome plated brass body, 6" swivel/rigid gooseneck
with stream regulator outlet, compression cartridge
with spring check, lever handle and 1/2" NPT female
inlet as tapis or equal and approved. 32mm chrome
plated l bottle-trap complete with waste fittings
1
E1.25
URINAL Urinal bowls
as Duravit D-code cat no. 082930007 or equal and
approved complete with 1NO. divider as duravit or
equal and approved, 32mm Chrome plated hinged
domed outlet grating, 32mm chrome plated urinal
bottle-trap, Complete with a Concealed flush valve as
docol or Equal and approved
0
E1.26
Sub Total For Supply and Fix only of Sanitary
Fittings for 1No. Unit cf to CareTaker HSE price
summary page
Page 65 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E2 Internal Plumbing - SUPPLY AND INSTALL
CareTaker HSE
Item Description Qty
Rates
(Kshs.)V
AT
INCL
Costs
(Kshs.)
E2.01 50mm bore water pipes 0
E2.02 40mm ditto 0
E2.03 32mm ditto 50
E2.04 25mm ditto 40
E2.05 20mm ditto 20
E2.06 15mm ditto 7
E2.07 50mm bends and elbows 0
E2.08 40mm ditto 0
E2.09 32mm ditto 5
E2.10 25mm ditto 12
E2.11 20mm ditto 15
E2.12 15mm ditto 4
E2.13 50mm Tee 0
E2.14 40mm ditto 0
E2.15 32mm ditto 1
E2.16 25mm Tee 5
E2.17 20mm ditto 5
E2.18 15mm ditto 0
Supply and Install the following in PPR-C PN20 (Polypropylene Random
Copolymer) iternal water pipework systems with fittings fixed and welding to be in
accordance to the manufacturer’s printed instructions as described. All PPR-C
bends,Tees,reducing Tees,reducers etc. are to be formed in accordance to the
manufacturer’s printed instructions. The installations to have the various sizes of
connectors, adaptors, sockets, reducers holdbats, clips, grating, covers etc. as
required for satisfactory functions. All pipes for hot water to be insulated using
Almaflex insulator or equal and approved.
Page 66 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E2.19 50x32x50mm reducer 0
E2.20 32x25x32mm reducer 1
E2.21 32x20x32mm reducer 0
E2.22 32x15mm reducer 0
E2.23 25x20x25mm reducer 4
E2.24 25x15x25mm ditto 6
E2.25 20x15x20mm ditto 3
E2.26 50mm non-return valve as Pegler 0
E2.27 40mm ditto 0
E2.28 32mm ditto 0
E2.29 25mm ditto 1
E2.30 20mm ditto 0
E2.31 15mm ditto 0
E2.32 50mm gate valve as Pegler 0
E2.33 40mm ditto 0
E2.34 32mm ditto 1
E2.35 25mm ditto 0
E2.36 20mm ditto 0
E2.37 15mm ditto 0
E2.38 50mm pipe sockets 0
E2.39 40mm ditto 0
E2.40 32mm ditto 2
E2.41 25mm ditto 12
E2.42 20mm ditto 7
E2.43 15mm ditto 5
E2.44 50mm pipe Union 0
E2.45 40mm ditto 0
E2.46 32mm ditto 1
E2.47 25mm ditto 1
E2.48 20mm ditto 5
E2.49 15mm ditto 1
E2.50 50 x 40mm male pipe adaptor 0
E2.51 32x25mm ditto 2
E2.52 25x20mm ditto 1
E2.53 20x15mm ditto 7
E2.54 50 x 40mm female pipe adaptor 0
E2.55 32x25mm ditto 1
Page 67 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E2.56 25x20mm ditto 7
E2.57 20x15mm ditto 6
E2.58 32 x 1" Transition fittings 1
E2.59 20 x 3/4" ditto 0
E2.60 15 x 1/2" ditto 5
E2.6115mm diameter 300mm long flexible connectors
complete with chrome plated stop cork5
E2.6220mm diameter 300mm long flexible connectors
complete with chrome plated stop cork0
E2.6315mm screw thread nipple complete with 2No. Back
nut0
E2.6425mm screw thread nipple complete with 2No. Back
nut0
E2.65 50mm float/ball valve 0
E2.6650mm long screw thread nipple complete with 2No.
Back nut0
E2.67
Water check meter
32mm Dispalcement or Velocity Water check meters,
ISO 9001 certified Type approval certificate (either
according to EN ISO 4064 from 2005 or 2014, or
OIML R49 from 2003 or 2013). Required
Certificates
- Manufacturer’s authorization
- KEBS certificate
1
E2.68
Testing & Commissioning: Allow for the sterilisation
and flushing, setting to work, testing and
commissioning.
1
E2.69Sub - total for Internal plumbing c/f to
CareTaker HSE price collection page
Page 68 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E3 Foul Drainage works -SUPPLY AND INSTALL
Supply and install the following in HDPE Tech Soil
and waste systems to BS EN 1519 with fittings fixed
in accordance to the manufacturer’s printed
instructions and BS EN 12056 and manufactured by
as described. All HDPE branches, Tees, reducing
Tees, reducers, cover, gratings,clips, etc. are to be
formed in accordance to the manufacturer’s printed
instruction. The installations to have the various
sizes of connectors, adaptors, sockets, reducers
holdbats, clips etc. as required for satisfactory
functions.
CareTaker HSE
Item Description Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
E3.01 125mm HDPE waste pipes 0
E3.02 100mm HDPE waste pipes 42
E3.03 70mm ditto 0
E3.04 60mm ditto 7
E3.05 56mm ditto 9
E3.06 100mm Access bend 0
E3.07 125mm HDPE BRANCH SWEPT 1
E3.08 100mm HDPE BRANCH SWEPT 1
E3.09 125X125X60mm HDPE Branch 1
E3.10 100X100X70mm HDPE Branch 0
E3.11 100X100X60mm HDPE Branch 1
E3.12 100X100X56mm HDPE Branch 6
E3.13 70X70X60mm HDPE Branch 0
E3.14 60X60X60mm HDPE Branch 0
E3.15 56X56X56mm HDPE Branch 6
E3.16 100x100mm HDPE bends 3
Page 69 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
E3.17 60x60mm ditto 5
E3.18 56x56mm ditto 11
E3.19 125X100mm reducer 1
E3.20 100x90mm reducer 3
E3.21 70x56mm ditto 0
E3.22 60x56mm ditto 3
E3.23 100x100mm fusion connector 3
E3.24 70mm ditto 0
E3.25 60mm ditto 1
E3.26 56mm ditto 3
E3.27100mm diameter Vent cowl and Weathering slate to
suite 100mm Hdpe pipe1
E3.28 100 x 56 x 56 mm 2 way HDPE floor trap c/w
stainless steel gratting and cover.7
E3.2990x90mm bend with long leg and seal for WC
connection3
E3.30 110mm HDPE Solvent fitting 0
E3.31Sub -Total For Foul drainage c/f to CareTaker
HSE price collection page VAT INCL
Page 70 of Vol 02
Item Description Qty
Rates
VAT
INCL
(Kshs.)
Costs
(Kshs.)
CareTaker HSE Price Collection Page
E1 Sanitaryware & Fittings - Supply and Fix only
E2 Internal Plumbing
E3 Internal drainage
E4 Contingency Sum 15,000
E5
Supply and Fix only, Internal Plumbing and
Drainage works cf to VOLUME 02 summary
PAGE
Page 71 of Vol 02
MECHANICAL INSTALLATIONS
F1
Supply and Fix only the following sanitaryware &
fittings including all materials and jointings to
supply, waste and overflow pipe fittings NB;All
Rates are VAT INCL
gatehouse
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F1.01
APARTMENTS WC WC Suite
Consisting of P-Trap Rimless WC Pan Close
Couple Cistern with With top flush fitting & Heavy
Duty soft close toilet seat.Pex-225 angle valve
1/2"x1/2", 4" pan connector and 1/2"x1/2"as PEX-
222-30 and flexible c.p connector. To as Duravit
DURASTYLE ECO or equal and approved
0
F1.02
DSQ WC WC close
couple with dual flush cistern, soft close seat and
cover, Pex-225 angle valve 1/2"x1/2", 4" pan
connector and 1/2"x1/2"as PEX-222-30 and
flexible c.p connector. TO BE AS NOVA EROS or
equal and approved.
1
F1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
1
F1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 1
F1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
0
Sanitaryware & Fittings - SUPPLY AND FIX ONLY
Page 80 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F1.06
MASTER WASHHAND BASIN Double
acrylic Wash Hand Basin complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete
with waste fittings. As TEKWISE C/W mixer as
TAPIS MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve
0
F1.07
CLOAK ROOM WHB Counter top
basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete
with waste fitting. To be as KAIGFAN CODE:
71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
0
F1.08
STANDARD BATHROOM WHB
Counter top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete
with waste fitting. To be as KAIGFAN CODE:
71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
0
Page 81 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash
hand basin 450x340mm 1 t/h No. LW241CJ with
half wall pedestal with fixing crews,, Pex-225 angle
valve 1/2"x1/2", chrome plated bottle trap and
waste fittings. C/W Pillar tap complete with 1/2''
angle valves and flexible pipe connection as tapis or
equal and approved.
1
F1.10
CLOAK ROOM -
Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
0
F1.11
STANDARD BATHROOM MIRROR
Frameless Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
F1.12
MASTER BATHROOM MIRROR Frameless
Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
F1.13
DSQ MIRROR Polished
Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
1
Page 82 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F1.14
SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
0
F1.15
ROBE HOOK Chrome plated Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approve
0
Page 83 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
0
F1.17
3 BR UNIT KITCHEN SINK Double
bowl single drainer Ultra Deep Bowl Stainless
Steel Kitchen Sink
(LEFT HAND BOWL) 2No 32mm chrome plated l
bottle-trap complete with waste fittings as
FRANKE Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and approved
Complete with 2No 1/2'' flex pipes or equal and
approved
0
F1.18
2 BR UNIT KITCHEN SINK Double
bowl single drainer Ultra Deep Bowl Stainless Steel
Kitchen Sink (RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete
with waste fittings FRANKE or equal and approved
Sink mounted swivel/rigid gooseneck pillar kitchen
mixer as Tapis or equal and approved Complete
with 2No 1/2'' flex pipes or equal and approved
0
F1.19
BATH TUB White
Acrylic Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine
waste/overflow chain fittings as KAIGFAN KA-
51572A cat.WHO-74SS. Floor standing faucet and
shower as KAIGFAN CODE: K-C15242 or equal
and approved
0
F1.20
SHOWER FITTINGS
4-way concealed shower mixer with diverter,
stainless steel Round shower head 200mm with
400mm stainless steel arm and bath spout as TAPIS
MACHHIATO or equal and approved.
0
Page 84 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F1.21
DSQ SHOWER; Instant
shower for salty water (white)
INCLUDING FACTORY MADE ARM as
LORENZETTI C/W Shower stop cork as tapis or
equal and approved or equal and approved
1
F1.22
SOAP BASKET Chrome
plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
1
F1.23 Bip-tap as tapis or equal and approved 1
F1.24
UTILITY SINK FAUCET Single
hole single temperature wall mount faucet with
polished chrome plated brass body, 6" swivel/rigid
gooseneck with stream regulator outlet,
compression cartridge with spring check, lever
handle and 1/2" NPT female inlet as tapis or equal
and approved. 32mm chrome plated l bottle-trap
complete with waste fittings
1
F1.25
URINAL Urinal bowls as Duravit D-code cat no.
082930007 or equal and approved complete with
1NO. divider as duravit or equal and approved,
32mm Chrome plated hinged domed outlet grating,
32mm chrome plated urinal bottle-trap, Complete
with a Concealed flush valve as docol or Equal and
approved
0
F1.26Sub Total For Fix only of Sanitary Fittings for
1No. Unit
F1.27Sub Total For Supply and Fix only of Sanitary
Fittings c/f to Gate House price collection page1
F2 Internal Plumbing - SUPPLY AND INSTALL
Page 85 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
gatehouse
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F2.01 50mm bore water pipes 0
F2.02 40mm ditto 0
F2.03 32mm ditto 5
F2.04 25mm ditto 20
F2.05 20mm ditto 20
F2.06 15mm ditto 2
F2.07 50mm bends and elbows 0
F2.08 40mm ditto 0
F2.09 32mm ditto 5
F2.10 25mm ditto 5
F2.11 20mm ditto 5
F2.12 15mm ditto 4
F2.13 50mm Tee 0
F2.14 40mm ditto 0
F2.15 32mm ditto 1
F2.16 25mm Tee 5
F2.17 20mm ditto 5
F2.18 15mm ditto 0
F2.19 50x32x50mm reducer 0
F2.20 32x25x32mm reducer 1
Supply and Install the following in PPR-C PN20 (Polypropylene Random
Copolymer) iternal water pipework systems with fittings fixed and welding to be
in accordance to the manufacturer’s printed instructions as described. All PPR-C
bends,Tees,reducing Tees,reducers etc. are to be formed in accordance to the
manufacturer’s printed instructions. The installations to have the various sizes of
connectors, adaptors, sockets, reducers holdbats, clips, grating, covers etc. as
required for satisfactory functions. All pipes for hot water to be insulated using
Almaflex insulator or equal and approved.
Page 86 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F2.21 32x20x32mm reducer 0
F2.22 32x15mm reducer 0
F2.23 25x20x25mm reducer 4
F2.24 25x15x25mm ditto 6
F2.25 20x15x20mm ditto 3
F2.26 50mm non-return valve as Pegler 0
F2.27 40mm ditto 0
F2.28 32mm ditto 0
F2.29 25mm ditto 1
F2.30 20mm ditto 0
F2.31 15mm ditto 0
F2.32 50mm gate valve as Pegler 0
F2.33 40mm ditto 0
F2.34 32mm ditto 1
F2.35 25mm ditto 0
F2.36 20mm ditto 0
F2.37 15mm ditto 0
F2.38 50mm pipe sockets 0
F2.39 40mm ditto 0
F2.40 32mm ditto 2
F2.41 25mm ditto 12
Page 87 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F2.42 20mm ditto 7
F2.43 15mm ditto 5
F2.44 50mm pipe Union 0
F2.45 40mm ditto 0
F2.46 32mm ditto 1
F2.47 25mm ditto 1
F2.48 20mm ditto 5
F2.49 15mm ditto 1
F2.50 50 x 40mm male pipe adaptor 0
F2.51 32x25mm ditto 2
F2.52 25x20mm ditto 1
F2.53 20x15mm ditto 7
F2.54 50 x 40mm female pipe adaptor 0
F2.55 32x25mm ditto 1
F2.56 25x20mm ditto 7
F2.57 20x15mm ditto 6
F2.58 32 x 1" Transition fittings 1
F2.59 20 x 3/4" ditto 0
F2.60 15 x 1/2" ditto 5
F2.6115mm diameter 300mm long flexible connectors
complete with chrome plated stop cork5
F2.6220mm diameter 300mm long flexible connectors
complete with chrome plated stop cork0
F2.6315mm screw thread nipple complete with 2No.
Back nut0
F2.6425mm screw thread nipple complete with 2No.
Back nut0
Page 88 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F2.65 50mm float/ball valve 0
F2.6650mm long screw thread nipple complete with 2No.
Back nut0
F2.67
Water check meter
32mm Dispalcement or Velocity Water check
meters, ISO 9001 certified Type approval
certificate (either according to EN ISO 4064 from
2005 or 2014, or OIML R49 from 2003 or 2013).
Required Certificates
- Manufacturer’s authorization
- KEBS certificate
1
F2.68
Testing & Commissioning: Allow for the
sterilisation and flushing, setting to work, testing
and commissioning.
1
F2.69Sub - total for Internal plumbing c/f to price
collection page
F2.70Sub - total for Internal plumbing c/f to Gate
House price collection page 1
Page 89 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F3 Foul Drainage works -SUPPLY AND INSTALL
Guard house
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F3.01 100mm HDPE waste pipes 5
F3.02 70mm ditto 3
F3.03 60mm ditto 2
F3.04 56mm ditto 0
F3.05 100mm Access bend 0
F3.06 100mm HDPE BRANCH SWEPT 3
F3.07 100X100X70mm HDPE Branch 2
F3.08 100X100X60mm HDPE Branch 4
F3.09 100X100X56mm HDPE Branch 0
F3.10 100x100mm HDPE bends 1
F3.11 60x60mm ditto 0
F3.12 56x56mm ditto 3
F3.13 100x90mm reducer 1
Supply and install the following in HDPE Tech Soil and waste systems to BS EN
1519 with fittings fixed in accordance to the manufacturer’s printed instructions
and BS EN 12056 and manufactured by as described. All HDPE branches, Tees,
reducing Tees, reducers, cover, gratings,clips, etc. are to be formed in
accordance to the manufacturer’s printed instruction. The installations to have
the various sizes of connectors, adaptors, sockets, reducers holdbats, clips etc. as
required for satisfactory functions.
Page 90 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
F3.14 70x56mm ditto 2
F3.15 60x56mm ditto 1
F3.16 100x100mm fusion connector 0
F3.17 70mm ditto 2
F3.18 60mm ditto 1
F3.19100mm diameter Vent cowl and Weathering slate to
suite 100mm Hdpe pipe1
F3.20 100 x 56 x 56 mm 2 way HDPE floor trap c/w
stainless steel gratting and cover.1
F3.21 110mm HDPE Solvent fitting 0
F3.22Sub -Total For Foul drainage c/f to price
collection page VAT INCL
F3.23Sub Total For Internal drainage c/f to Gate
House price collection page 1
Gate House Price Collection Page
F1 Sanitaryware & Fittings - Supply and Fix only
F2 Internal Plumbing
F3 Internal drainage
F4 Contingency Sum 5,000
F5
Sub Total For Sanitary Fittings - Supply and
Fix only , Internal Plumbing and Drainage
works cf to VOLUME 02 summary PAGE
Page 91 of Vol 02
MECHANICAL INSTALLATIONS
G1Sanitaryware & Fittings - SUPPLY ND FIX
ONLY
Supply and Fix only the following sanitaryware &
fittings including all materials and jointings to
supply, waste and overflow pipe fittings
Swimming Pool Changing Room
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G1.01
WC Suite Consisting of P-Trap Rimless WC Pan
Close Couple Cistern with With top flush fitting &
Heavy Duty soft close toilet seat.Pex-225 angle valve
1/2"x1/2", 4" pan connector and 1/2"x1/2"as PEX-
222-30 and flexible c.p connector. To as Duravit
DURASTYLE ECO or equal and approved
4
G1.02
DSQ WC close couple with dual flush cistern, soft
close seat and cover, Pex-225 angle valve 1/2"x1/2",
4" pan connector and 1/2"x1/2"as PEX-222-30 and
flexible c.p connector. TO BE AS NOVA EROS or
equal and approved.
0
G1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
0
G1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 4
G1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
0
Page 99 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G1.06
MASTER WASHHAND BASIN Double acrylic
Wash Hand Basin complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete with
waste fittings. As TEKWISE C/W mixer as TAPIS
MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve
0
G1.07
CLOAK ROOM WHB Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with
waste fitting. To be as KAIGFAN CODE: 71662L/R
C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
0
G1.08
STANDARD BATHROOM WHB
Counter top basin; Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with
waste fitting. To be as KAIGFAN CODE: 71662L/R
C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2",
equal and approve or equal and approved
0
Page 100 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash hand
basin 450x340mm 1 t/h No. LW241CJ with half
wall pedestal with fixing crews,, Pex-225 angle valve
1/2"x1/2", chrome plated bottle trap and waste
fittings. C/W Pillar tap complete with 1/2'' angle
valves and flexible pipe connection as tapis or equal
and approved.
6
G1.10
CLOAK ROOM -
Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
0
G1.11
STANDARD BATHROOM MIRROR Frameless
Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
G1.12
MASTER BATHROOM MIRROR Frameless Bevel
Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
2
Page 101 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G1.13
DSQ MIRROR Polished Edged
Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
0
G1.14
SHOWER TOWEL RAIL-60CM
Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
4
G1.15
ROBE HOOK Chrome plated Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approve
4
G1.16
TOWEL RING Chrome plated Towel Ring
Size:200X84X29mm as LARSD
CODE: GC5160 or equal and approved
6
G1.17
3 BR UNIT KITCHEN SINK Double bowl single
drainer Ultra Deep Bowl Stainless Steel Kitchen
Sink
(LEFT HAND BOWL) 2No 32mm chrome plated l
bottle-trap complete with waste fittings as FRANKE
Sink mounted swivel/rigid gooseneck pillar kitchen
mixer as Tapis or equal and approved Complete with
2No 1/2'' flex pipes or equal and approved
0
Page 102 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G1.18
2 BR UNIT KITCHEN SINK Double bowl single
drainer Ultra Deep Bowl Stainless Steel Kitchen Sink
(RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete with
waste fittings FRANKE or equal and approved Sink
mounted swivel/rigid gooseneck pillar kitchen mixer
as Tapis or equal and approved Complete with 2No
1/2'' flex pipes or equal and approved
0
G1.19
BATH TUB White Acrylic Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine
waste/overflow chain fittings as KAIGFAN KA-
51572A cat.WHO-74SS. Floor standing faucet and
shower as KAIGFAN CODE: K-C15242 or equal
and approved
0
Page 103 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G1.20
SHOWER FITTINGS 4-
way concealed shower mixer with diverter, stainless
steel Round shower head 200mm with 400mm
stainless steel arm and bath spout as TAPIS
MACHHIATO or equal and approved.
0
G1.21
DSQ SHOWER; Instant shower for salty water
(white)
INCLUDING FACTORY MADE ARM as
LORENZETTI C/W Shower stop cork as tapis or
equal and approved or equal and approved
4
G1.22
SOAP BASKET Chrome
plated Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
4
G1.23 Bip-tap as tapis or equal and approved 1
G1.24
UTILITY SINK FAUCET Single hole single
temperature wall mount faucet with polished chrome
plated brass body, 6" swivel/rigid gooseneck with
stream regulator outlet, compression cartridge with
spring check, lever handle and 1/2" NPT female inlet
as tapis or equal and approved. 32mm chrome plated
l bottle-trap complete with waste fittings
1
G1.25
URINAL Urinal bowls as Duravit D-code cat no.
082930007 or equal and approved complete with
1NO. divider as duravit or equal and approved,
32mm Chrome plated hinged domed outlet grating,
32mm chrome plated urinal bottle-trap, Complete
with a Concealed flush valve as docol or Equal and
approved
2
G1.26
Sub Total For Supply and Fix only of Sanitary
Fittings for 1No. Unit cf Swimming Pool
Changing Room price summary page
Page 104 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G2
Swimming Pool Changing Room
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G2.01 50mm bore water pipes 50
G2.02 40mm ditto 67
G2.03 32mm ditto 28
G2.04 25mm ditto 102
G2.05 20mm ditto 42
G2.06 15mm ditto 8
G2.07 50mm bends and elbows 8
G2.08 40mm ditto 8
G2.09 32mm ditto 10
G2.10 25mm ditto 18
G2.11 20mm ditto 18
G2.12 15mm ditto 7
G2.13 50mm Tee 1
G2.14 40mm ditto 0
G2.15 32mm ditto 3
G2.16 25mm Tee 3
G2.17 20mm ditto 3
G2.18 15mm ditto 0
G2.19 50x32x50mm reducer 3
G2.20 32x25x32mm reducer 2
G2.21 32x20x32mm reducer 3
G2.22 32x15mm reducer 0
G2.23 25x20x25mm reducer 12
G2.24 25x15x25mm ditto 10
G2.25 20x15x20mm ditto 5
G2.26 50mm non-return valve as Pegler 0
G2.27 40mm ditto 0
G2.28 32mm ditto 0
G2.29 25mm ditto 0
G2.30 20mm ditto 0
G2.31 15mm ditto 0
G2.32 50mm gate valve as Pegler 2
G2.33 40mm ditto 0
Internal Plumbing - SUPPLY AND INSTALL
Supply and Install the following in PPR-C PN20
Page 105 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G2.34 32mm ditto 3
G2.35 25mm ditto 6
G2.36 20mm ditto 0
G2.37 15mm ditto 0
G2.38 50mm pipe sockets 25
G2.39 40mm ditto 34
G2.40 32mm ditto 15
G2.41 25mm ditto 51
G2.42 20mm ditto 18
G2.43 15mm ditto 10
G2.44 50mm pipe Union 17
G2.45 40mm ditto 22
G2.46 32mm ditto 10
G2.47 25mm ditto 3
G2.48 20mm ditto 12
G2.49 15mm ditto 3
G2.50 50 x 40mm male pipe adaptor 2
G2.51 32x25mm ditto 4
G2.52 25x20mm ditto 6
G2.53 20x15mm ditto 18
G2.54 50 x 40mm female pipe adaptor 2
G2.55 32x25mm ditto 8
G2.56 25x20mm ditto 8
G2.57 20x15mm ditto 12
G2.58 32 x 1" Transition fittings 6
G2.59 20 x 3/4" ditto 12
G2.60 15 x 1/2" ditto 8
G2.6115mm diameter 300mm long flexible connectors
complete with chrome plated stop cork16
G2.6220mm diameter 300mm long flexible connectors
complete with chrome plated stop cork1
G2.6315mm screw thread nipple complete with 2No. Back
nut0
Page 106 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G2.6425mm screw thread nipple complete with 2No. Back
nut10
G2.65 50mm float/ball valve 0
G2.6650mm long screw thread nipple complete with 2No.
Back nut0
G2.67
Water check meter
32mm Dispalcement or Velocity Water check meters,
ISO 9001 certified Type approval certificate (either
according to EN ISO 4064 from 2005 or 2014, or
OIML R49 from 2003 or 2013). Required
Certificates
- Manufacturer’s authorization
- KEBS certificate
3
G2.68
Testing & Commissioning: Allow for the sterilisation
and flushing, setting to work, testing and
commissioning.
1
G2.69
Sub - total for Internal plumbing c/f to
Swimming Pool Changing Room price collection
page
Page 107 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G3
Swimming Pool Changing Room
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G3.01 100mm HDPE waste pipes 48
G3.02 50mm ditto 64
G3.03 40mm ditto 45
G3.04 32mm ditto 0
G3.05 100mm Access bend 0
G3.06 100mm 90 degrees bend 15
G3.07 50mm ditto 5
G3.08 40mm ditto 12
G3.09 32mm ditto 0
G3.10 100X100mm HDPE Tee/Branch 45DEGREE 16
G3.11 100X50mm 45 DEGREE 25
G3.12 100X40mm 45 DEGREE 4
G3.13 50x50mm Tee 4
G3.14 40mm ditto 3
G3.15 100mm inspection plug 5
G3.16 50mm ditto 4
G3.17 40mm ditto 5
G3.18 100x50mm reducer 15
Supply and install the following in HDPE Tech Soil and waste systems to BS EN
1519 with fittings fixed in accordance to the manufacturer’s printed instructions and
BS EN 12056 and manufactured by as described. All HDPE branches, Tees, reducing
Tees, reducers, cover, gratings,clips, etc. are to be formed in accordance to the
manufacturer’s printed instruction. The installations to have the various sizes of
connectors, adaptors, sockets, reducers holdbats, clips etc. as required for
satisfactory functions.
Foul Drainage works -SUPPLY AND INSTALL
Page 108 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
G3.19 32x40mm ditto 5
G3.20 40x50mm ditto 16
G3.21 100 fusion connector 15
G3.22 50mm ditto 16
G3.23 40mm ditto 5
G3.24100mm diameter Vent cowl and Weathering slate to
suite 100mm Hdpe pipe7
G3.25 100 x 50 x 40 mm 2 way HDPE floor trap c/w
stainless steel gratting and cover.16
G3.26 110mm WC connector 9
G3.27 110mm HDPE Solvent fitting 0
G3.28
Sub -Total For Foul drainage c/f to Swimming
Pool Changing Room price collection page VAT
INCL
Swimming Pool Changing Room Price Collection Page
G1 Sanitaryware & Fittings - Supply and Fix only
G2 Internal Plumbing
G3 Internal drainage
G4 Contingency Sum 35,000
G5
Sub Total For Sanitary Fittings - Supply and Fix
only , Internal Plumbing and Drainage works to
VOLUME 02 summary PAGE
Page 109 of Vol 02
MECHANICAL INSTALLATIONS
H1 Sanitaryware & Fittings - SUPPLY AND FIX ONLY
Common Washrooms GF
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H1.01
WC Suite Consisting of P-Trap Rimless WC Pan Close Couple Cistern
with With top flush fitting & Heavy Duty soft close toilet seat.Pex-225
angle valve 1/2"x1/2", 4" pan connector and 1/2"x1/2"as PEX-222-30 and
flexible c.p connector. To as Duravit DURASTYLE ECO or equal and
approved
6
H1.02
DSQ WC WC close couple with dual flush cistern, soft close seat and
cover, Pex-225 angle valve 1/2"x1/2", 4" pan connector and 1/2"x1/2"as
PEX-222-30 and flexible c.p connector. TO BE AS NOVA EROS or equal
and approved.
0
H1.03
TOILET ROLL HOLDER
Chrome plated Toilet Roll holder
Size:140X90X30mm as LARSD
CODE: GC5151 or equal and approved
6
H1.04DSQ TOILET ROLL HOLDER
Chrome plated toilet roll holder 6
H1.05
TOILET BRUSH HOLDER
Size:373X118X113mm as LARSD
CODE: GC5157 or equal and approved
6
H1.06
MASTER WASHHAND BASIN Double acrylic Wash Hand Basin
complete with cabinet
Size:1500X460X530mm
Wall Hung
2No 32mm chrome plated l bottle-trap complete with waste fittings. As
TEKWISE C/W mixer as TAPIS MACHHIATO or equal and approved
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2", equal and approve
0
H1.07
CLOAK ROOM WHB Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with waste fitting. To be
as KAIGFAN CODE: 71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2", equal and approve or
equal and approved
0
H1.08
STANDARD BATHROOM WHB Counter top basin;
Size:405X200X105mm
1No 32mm chrome plated bottle-trap complete with waste fitting. To be
as KAIGFAN CODE: 71662L/R C/W mixer as TAPIS MACHHIATO
2No 1/2'' flex pipes, 2No angle valve 1/2"x1/2", equal and approve or
equal and approved
0
H1.09
DSQ AND MULTIPURPOSE WHBDSQ Wash hand basin 450x340mm
1 t/h No. LW241CJ with half wall pedestal with fixing crews,, Pex-225
angle valve 1/2"x1/2", chrome plated bottle trap and waste fittings. C/W
Pillar tap complete with 1/2'' angle valves and flexible pipe connection as
tapis or equal and approved.
8
Supply and Fix only the following sanitaryware & fittings including all materials and jointings to supply, waste and
overflow pipe fittings
Page 115 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H1.10
CLOAK ROOM - Frameless Bevel Edged Mirror
Size: 1200 X 950
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass.
Bevel: 1” beveled edge
0
H1.11
STANDARD BATHROOM MIRROR Frameless Bevel Edged Mirror
Size: 1200 X 605mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
0
H1.12
MASTER BATHROOM MIRROR Frameless Bevel Edged Mirror
Size: 1650 X 1850mm
Fixing: Screwless
Edge finish: Polished edges
Material and thickness: ¼ inch Tempered glass
Bevel: 1” beveled edge
4
H1.13
DSQ MIRROR Polished Edged Mirror
Size: 800 X 600mm
Fixing: With screws
Edge finish: Polished edges
Material and thickness: 4mm
0
H1.14
SHOWER TOWEL RAIL-60CM Chrome plated Towel bar
Size:600X112X30mm as LARSD
CODE: GC5100 series
60 cm or equal and approved
2
H1.15
ROBE HOOK Chrome plated Towel hook
Size:265X165X60mm as LARSD
CODE: 103B 60 cm or equal and approve
6
H1.16 PAPER TOWEL DISPENSOR as mediclinic or equal and approved 4
H1.17
3 BR UNIT KITCHEN SINK Double bowl single drainer Ultra Deep
Bowl Stainless Steel Kitchen Sink
(LEFT HAND BOWL) 2No 32mm chrome plated l bottle-trap complete
with waste fittings as FRANKE Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and approved Complete with 2No
1/2'' flex pipes or equal and approved
0
Page 116 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H1.18
2 BR UNIT KITCHEN SINK Double bowl single drainer Ultra Deep
Bowl Stainless Steel Kitchen Sink (RIGHT HAND BOWL)
2No 32mm chrome plated l bottle-trap complete with waste fittings
FRANKE or equal and approved Sink mounted swivel/rigid gooseneck
pillar kitchen mixer as Tapis or equal and approved Complete with 2No
1/2'' flex pipes or equal and approved
0
H1.19
BATH TUB White Acrylic Freestanding Bathtub
Size: 1500 by 720 x 610mm
Complete with chrome plated Combine waste/overflow chain fittings as
KAIGFAN KA-51572A cat.WHO-74SS. Floor standing faucet and shower
as KAIGFAN CODE: K-C15242 or equal and approved
0
H1.20
SHOWER FITTINGS 4-way concealed shower
mixer with diverter, stainless steel Round shower head 200mm with
400mm stainless steel arm and bath spout as TAPIS
MACHHIATO or equal and approved.
0
H1.21
MULTI PURPOSE SHOWER; Instant
shower for salty water (white)
INCLUDING FACTORY MADE ARM as LORENZETTI C/W Shower
stop cork as tapis or equal and approved or equal and approved
2
Page 117 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H1.22
SOAP BASKET Chrome plated
Shower Basket
Size:265X165X60mm as LARSD
CODE: 103B or equal and approved
2
H1.23 Bip-tap as tapis or equal and approved 2
H1.24
UTILITY SINK FAUCET Single hole single
temperature wall mount faucet with polished chrome plated brass body, 6"
swivel/rigid gooseneck with stream regulator outlet, compression cartridge
with spring check, lever handle and 1/2" NPT female inlet as tapis or
equal and approved. 32mm chrome plated l bottle-trap complete with waste
fittings
2
H1.25
URINAL Urinal bowls as Duravit D-code cat
no. 082930007 or equal and approved complete with 1NO. divider as
duravit or equal and approved, 32mm Chrome plated hinged domed outlet
grating, 32mm chrome plated urinal bottle-trap, Complete with a
Concealed flush valve as docol or Equal and approved
4
H1.26Sub Total For Supply and Fix only of Sanitary Fittings for 1No. Unit
Common Washrooms GF price summary Page
Page 118 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H2
Common Washrooms GF
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H2.01 50mm bore water pipes 50
H2.02 40mm ditto 67
H2.03 32mm ditto 28
H2.04 25mm ditto 102
H2.05 20mm ditto 42
H2.06 15mm ditto 8
H2.07 50mm bends and elbows 8
H2.08 40mm ditto 8
H2.09 32mm ditto 10
H2.10 25mm ditto 18
H2.11 20mm ditto 18
H2.12 15mm ditto 7
H2.13 50mm Tee 1
H2.14 40mm ditto 0
H2.15 32mm ditto 3
Internal Plumbing - SUPPLY AND INSTALL
Supply and Install the following in PPR-C PN20 (Polypropylene Random Copolymer) iternal water pipework systems
with fittings fixed and welding to be in accordance to the manufacturer’s printed instructions as described. All PPR-C
bends,Tees,reducing Tees,reducers etc. are to be formed in accordance to the manufacturer’s printed instructions. The
installations to have the various sizes of connectors, adaptors, sockets, reducers holdbats, clips, grating, covers etc. as
required for satisfactory functions.All pipes for hot water to be insulated using Almaflex insulator or equal and
approved.
Page 119 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H2.16 25mm Tee 3
H2.17 20mm ditto 3
H2.18 15mm ditto 0
H2.19 50x32x50mm reducer 3
H2.20 32x25x32mm reducer 2
H2.21 32x20x32mm reducer 3
H2.22 32x15mm reducer 0
H2.23 25x20x25mm reducer 12
H2.24 25x15x25mm ditto 10
H2.25 20x15x20mm ditto 5
H2.26 50mm non-return valve as Pegler 0
H2.27 40mm ditto 0
H2.28 32mm ditto 0
H2.29 25mm ditto 0
H2.30 20mm ditto 0
H2.31 15mm ditto 0
H2.32 50mm gate valve as Pegler 2
H2.33 40mm ditto 0
H2.34 32mm ditto 3
H2.35 25mm ditto 6
H2.36 20mm ditto 0
H2.37 15mm ditto 0
H2.38 50mm pipe sockets 25
H2.39 40mm ditto 34
H2.40 32mm ditto 15
H2.41 25mm ditto 51
H2.42 20mm ditto 18
H2.43 15mm ditto 10
H2.44 50mm pipe Union 17
H2.45 40mm ditto 22
H2.46 32mm ditto 10
H2.47 25mm ditto 3
H2.48 20mm ditto 12
H2.49 15mm ditto 3
H2.50 50 x 40mm male pipe adaptor 2
H2.51 32x25mm ditto 4
H2.52 25x20mm ditto 6
H2.53 20x15mm ditto 18
Page 120 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H2.54 50 x 40mm female pipe adaptor 2
H2.55 32x25mm ditto 8
H2.56 25x20mm ditto 8
H2.57 20x15mm ditto 12
H2.58 32 x 1" Transition fittings 6
H2.59 20 x 3/4" ditto 12
H2.60 15 x 1/2" ditto 8
H2.6115mm diameter 300mm long flexible connectors complete with chrome
plated stop cork16
H2.6220mm diameter 300mm long flexible connectors complete with chrome
plated stop cork1
H2.63 15mm screw thread nipple complete with 2No. Back nut 0
H2.64 25mm screw thread nipple complete with 2No. Back nut 10
H2.65 50mm float/ball valve 0
H2.66 50mm long screw thread nipple complete with 2No. Back nut 0
H2.67
Water check meter
32mm Dispalcement or Velocity Water check meters, ISO 9001 certified
Type approval certificate (either according to EN ISO 4064 from 2005 or
2014, or OIML R49 from 2003 or 2013). Required Certificates
- Manufacturer’s authorization
- KEBS certificate
3
H2.68Testing & Commissioning: Allow for the sterilisation and flushing, setting
to work, testing and commissioning.1
H2.69Sub - total for Internal plumbing c/f to Common Washrooms GF
price collection page
Page 121 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H3
Common Washrooms GF
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H3.01 100mm HDPE waste pipes 48
H3.02 50mm ditto 64
H3.03 40mm ditto 45
H3.04 32mm ditto 0
H3.05 100mm Access bend 0
H3.06 100mm 90 degrees bend 15
H3.07 50mm ditto 5
H3.08 40mm ditto 12
H3.09 32mm ditto 0
H3.10 100X100mm HDPE Tee/Branch 45DEGREE 16
H3.11 100X50mm 45 DEGREE 25
Foul Drainage works -SUPPLY AND INSTALL
Supply and install the following in HDPE Tech Soil and waste systems to BS EN 1519 with fittings fixed in
accordance to the manufacturer’s printed instructions and BS EN 12056 and manufactured by as described. All
HDPE branches, Tees, reducing Tees, reducers, cover, gratings,clips, etc. are to be formed in accordance to the
manufacturer’s printed instruction. The installations to have the various sizes of connectors, adaptors, sockets,
reducers holdbats, clips etc. as required for satisfactory functions.
Page 122 of Vol 02
Item Description Qty Rates
(Kshs.)
Costs
(Kshs.)
H3.12 100X40mm 45 DEGREE 4
H3.13 50x50mm Tee 4
H3.14 40mm ditto 3
H3.15 100mm inspection plug 5
H3.16 50mm ditto 4
H3.17 40mm ditto 7
H3.18 100x50mm reducer 15
H3.19 32x40mm ditto 10
H3.20 40x50mm ditto 16
H3.21 100 fusion connector 15
H3.22 50mm ditto 16
H3.23 40mm ditto 5
H3.24100mm diameter Vent cowl and Weathering slate to suite 100mm Hdpe
pipe7
H3.25 100 x 50 x 40 mm 2 way HDPE floor trap c/w stainless steel gratting and
cover.16
H3.26 110mm WC connector 9
H3.27 110mm HDPE Solvent fitting 0
H3.28Sub -Total For Foul drainage c/f to Common Washrooms GF price
collection page VAT INCL
H1 Sanitaryware & Fittings - Supply and Fix only
H2 Internal Plumbing
H3 Internal drainage
H4 Contingency Sum 35,000
H5Sub Total For Sanitary Fittings - Supply and Fix only , Internal
Plumbing and Drainage works cf to VOLUME 02 summary PAGE
Common Washrooms GF Price Collection Page
Page 123 of Vol 02
I1Common Soil Water Drainage - SUPPLY
AND INSTALL
Item Description Units Qty
Rates
(Kshs.)
VAT
Costs
(Kshs.)
I1.01 200mm bore HDPE pipes Lm 477
I1.02 150mm bore HDPE pipes Lm 203
I1.03 100mm bore ditto Lm 559
I1.04 200mm HDPE bends 90 Degree No 25
I1.05 150mm HDPE bends 90 Degree No 10
I1.06 100mm ditto No 121
I1.07 200x200x100mm HDPE TEE 45 Degree No 93
I1.08 150x150x100mm HDPE TEE 45 Degree No 25
I1.09 100x100x100mm ditto No 25
I1.10 200x110mm HDPE reducer No 93
I1.11 150x110mm HDPE reducer No 25
I1.12 200mm Expansion fitting No 32
I1.13 150mm Expansion fitting No 5
I1.14 100mm ditto No 75
I1.15 100mm Vent and cowl No 136
I1.16 NCC water connection item 1
I1.17Sub-Total For Soil water drainage c/f to
VOLUME 02 summary PAGE
Supply and install the following in HDPE Tech Soil and waste systems to BS EN 1519
with fittings fixed in accordance to the manufacturer’s printed instructions and BS
EN 12056 and manufactured by as described. All HDPE branches, Tees, reducing
Tees, reducers, cover, gratings,clips, etc. are to be formed in accordance to the
manufacturer’s printed instruction. The installations to have the various sizes of
connectors, adaptors, sockets, reducers holdbats, clips, Factory Manufactured pipe
support hungers etc. as required for satisfactory functions.
Page 125 of Vol 02
J1 Parking floor Drainage - SUPPLY AND INSTALL
Item DescriptionUnit
sQty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
J1.01 150mm bore Heavy duty grey pipes Lm 476
J1.02 100mm bore Heavy duty grey pipes Lm 966
J1.03 150mm Sweep bend No 92
J1.04 100mm Sweep bend No 89
J1.05 100mm Access bend No 15
J1.06 150mm single Upvc Tee No 21
J1.07 100mm single Upvc Tee No 121
J1.08 150mm rain water strainer No 0
J1.09250x 100mm heavyduty steeel floor drains
complete with gratingNo 121
J1.10 100x100mm upvc adaptor No 121
J1.11100mm diameter gulley pots c/w chamber and
mild steel gratingNo 85
J1.12
Fullbora outlet with grating and 100mm vertical
rainwater outlet.The fullbora to be made from
durable corrossion resistant steel material c/w
fixing contact sheet to suite installation on flat
slab.
No 10
Supply and install the following in UPVC soil, waste systems to BS 4514 and 5225 with
fittings fixed in accordance to the manufacturer’s printed instructions and BS 5572 and
manufactured by “KEY TERRAIN” as described. All UPVC branches,Tees,reducing
Tees,reducers etc. are to be formed in accordance to the manufacturer’s printed instruction.
The installations to have the various sizes of connectors, adaptors, sockets, reducers holdbats,
clips, grating, covers,Factory Manufactured pipe support hungers etc. as required for
satisfactory functions.
Page 126 of Vol 02
Item DescriptionUnit
sQty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
J1.13
Supply, deliver and install 1No. duty and 1No.
standby submersible drainage pumps as Dayliff
DWW 30M. Each pump shall have a flowrate of
10m3/hour against a head of 20m. The pumps to
come on alternatelly such that any of the
combination can act as the duty and non is
purely standby. When any of the pump reaches
75% of its peak performance the other should
come on automatically The pump shall be
supplied complete with pressure vessel, float
switches The bidder must allow for all the
coupling, flanges, connectors, joints, etc connect
to the existing pipe work and also where
necessary pipes clips, holderbats plugged and
screws and brackets must be compatible to
modbus BMS protocol and sim card provision.
Set 3
J1.14
Sub-Total For Parking drainage c/f to price
collection page cf to VOLUME 02 summary
PAGE
Page 127 of Vol 02
K1
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
K1.01 150mm bore HDPE pipes Lm 270
K1.02 100mm bore ditto Lm 2,200
K1.03 150mm HDPE bends 90 Degree No 24
K1.04 100mm ditto No 35
K1.05150x150x100mm HDPE TEE 45
DegreeNo 25
K1.06 150x110mm HDPE reducer No 35
K1.07 100mm EXPANSION adaptors No 315
K1.08
ROOF OUTLET 100mm Geberit
Roof outlet with contact sheet
[Code number: 359.037.00.1]
complete with adaptor to HDPE
pipes
No 36
K1.09
Sub-Total For rain water
drainage c/f to VOLUME 02
summary PAGE
Supply and install the following in HDPE Tech Soil and waste systems to
BS EN 1519 with fittings fixed in accordance to the manufacturer’s
printed instructions and BS EN 12056 and manufactured by as described.
All HDPE branches, Tees, reducing Tees, reducers, cover, gratings,clips,
etc. are to be formed in accordance to the manufacturer’s printed
instruction. The installations to have the various sizes of connectors,
adaptors, sockets, reducers holdbats, clips, Factory Manufactured pipe
support hungers etc. as required for satisfactory functions.
RAINWATER Water Drainage - SUPPLY AND INSTALL
Page 128 of Vol 02
L1
Item Description Unit Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
L1.01 40mm ditto LM 70
L1.02 50mm ditto LM 50
L1.03 65mm ditto LM 421
L1.04 75mm ditto LM 0
L1.05 40mm elbows/bends No. 20
L1.06 50mm ditto No. 70
L1.07 65mm ditto No. 35
L1.08 75mm ditto No. 0
L1.09 75mm Tees No. 0
L1.10 65mm ditto No. 6
L1.11 50mm ditto No. 5
L1.12 40mm ditto No. 10
L1.13 75x65 mm Reducer No. 0
L1.14 65x50mm Reducer No. 6
L1.15 50x40mm Reducer No. 2
L1.16 50x32mm Reducer No. 2
L1.17 50mm non-return valve as Pegler No. 4
L1.18 65mm ditto No. 2
L1.19 50mm ditto No. 0
WATER RETICULATION Supply and fix the following in PPR-C PN 25 (Polypropylene Random
Copolymer) PN25 internal water pipework systems with fittings fixed
and welding to be in accordance to the manufacturer’s printed
instructions as described. All PPR-C bends,Tees,reducing
Tees,reducers etc. are to be formed in accordance to the manufacturer’s
printed instructions. The installations to have the various sizes of
connectors, adaptors, sockets, reducers holdbats, clips etc. as required
for satisfactory functions. ( All the Pipe Diameters are INTERNAL
DIAMETERS AND PN25 RATED. All PPR pipe work expoesed i to
direct sunlight in the roof area to be insulated using armaflex
insulation material to engineers approval.
Page 129 of Vol 02
Item Description Unit Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
L1.20 75mm unions No. 0
L1.21 65mm ditto No. 80
L1.22 50mm ditto No. 10
L1.23
Cold Water elevated Tanks
65,000 litres capacity tank, overall size 7.32m x
3.66m x 2.44m high located High level supprt
structure to be provided by others with the
following components.
1) Tank Plates; 6mm thick of 1m square, hot
pressed from mild steel plates in one piece.
2) Covers; To be provided to in accordance to
BS449
3) Float Valve Chambers in compliance with
WRAS
4) Cleats and Stays fabricated from steel. Angle
and channel stiffeners to be provided.
5) Bolts, Nuts and Washers construction to comply
with the requirements of BS.1564
6) Joining material for flanges of the tank plates,
under the tank cleats and for sealing the cover
plates
8) Protective treatment to be shop finish to BS EN
ISO 1461:1999
9) Ant-vermin screens
10) External and internal ladders and hand rails to
BS 4211
11) Tank shall have provisions for100mm outlet,
12) mm supply pipe, 100mm overflow, 50mm
warning pipe ,100mm washout internal and other
accessories.
No 2
Page 130 of Vol 02
Item Description Unit Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
L1.24
Cold Water elevated Tanks; 98,000 litres
capacity tank, overall size 10.98m x 3.66m x 2.44m
high located High level supprt structure to be
provided by others with the following components.
1) Tank Plates; 6mm thick of 1m square, hot
pressed from mild steel plates in one piece.
2) Covers; To be provided to in accordance to
BS449
3) Float Valve Chambers in compliance with
WRAS
4) Cleats and Stays fabricated from steel. Angle
and channel stiffeners to be provided.
5) Bolts, Nuts and Washers construction to comply
with the requirements of BS.1564
6) Joining material for flanges of the tank plates,
under the tank cleats and for sealing the cover
plates
8) Protective treatment to be shop finish to BS EN
ISO 1461:1999
9) Ant-vermin screens
10) External and internal ladders and hand rails to
BS 4211
11) Tank shall have provisions for100mm outlet,
12) mm supply pipe, 100mm overflow, 50mm
warning pipe ,100mm washout internal and other
accessories.
No 2
Page 131 of Vol 02
Item Description Unit Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
L1.25
Water booster pump.
Automatic duplicate Duty and
Standby submersible pumpset. Each
pump capable of delivering water at
a Flow rate of 10cu meters/hr each
against a positive head of 30metres.
The pumpset shall be supplied
complete with pressure vessels,
float switches, control panels, and
any other necessary fittings . The
pumpset to comprise of 2 No
grundfos or dayliff pumps or equal
and approved .
SET 2
Page 132 of Vol 02
Item Description Unit Qty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs.)
L1.26
Water booster pump.
Supply and install Automatic
duplicate Variable speed water
transfer pumps set of 3 verticle
multi-stage pumps operating as 2
Duty and 1 Standby capable of
delivering water 30 cu meters/hr
each against a positive head of
120metres. The pumpset shall be
supplied complete with VFD control
panel, pressure vessels, float
switches, pressure swit ches, control
panels, and any other necessary
fittings . The pumpset to as DAB
Centrifugal Pump 3NKVE 15/10 S
T E1 MCE 400-50 IE3 or equal and
approved .
SET 1
L1.27 NCC water connection item 1
L1.28 Testing and commissioning item 1
L1.29
Sub - total for water reticulation
c/f to Water reticulation Price
collection page.
H1 Water Reticulation
H2 Contingency 600,000
H3
Total for Water reticulation and
Central Tanks cf to VOLUME
02 summary PAGE
WATER RETICULATION PRICE
Page 133 of Vol 02
M HOSEREEL
ITEM DESCRIPTION 3 rd frUNI
T
QT
Y
Rates
(Kshs.)
VAT
INCL
AMOUN
T
(Kshs.)
M1.01 65mm bore water pipes 0 Lm 46
M1.02 25mm bore water pipes 6 Lm 132
M1.03 20mm bore water pipes 6 Lm 132
M1.04 25mm nipples 4 No. 94
M1.05 20mm nipples 4 No. 94
M1.06 63mm bends and elbows 0 No 24
M1.07 65mm Tee 4 No 94
M1.08 65x25mm Reducer 4 No 94
M1.09 25x20mm ditto 4 No 94
M1.10 65mm gate valve as Pegler 0 No 6
M1.11 25mm valves 4 No 94
M1.12 25mm Pressure reducing valve 4 No 94
M1.13 65mm pipe union 0 No 15
M1.14 25mm pipe union 4 No 94
M1.15
Automatic, non-recessed swing type
hosereel as Angus fire Armour model-1 or
equal and approved. Hosereel shall have
the following characteristics
-Full 180 degree swing, delivery valve
25mm BSP inlet to BS5274
-25mmx30m long hose pipe
-Mild steel feed pipe to BS1387 class "B."
4 No. 94
Supply and install the following dry riser equipments manufactured in accordance
with BS 5041 part 2. The valves have instaneous coupling to BS 336 for connection to
fire fighting hose.S The installion to be as described in NFPA . Black or galvanized
steel pipe shall be either ASTM A 53 seamless grooved for pipe bigger than 65mm
while 50mm and below to be threaded or electric welded,all Tees shall be grooved
mechanical tees Grade A or B to Engineers approval
Page 134 of Vol 02
ITEM DESCRIPTION 3 rd frUNI
T
QT
Y
Rates
(Kshs.)
VAT
INCL
AMOUN
T
(Kshs.)
M1.16
Automatic duplicate (2No.) Fire hosereel
water booster pumps set comprising one
duty the other standby. The pumps Shall be
set such that if the duty pump fails to start,
the standby shall start automatically within
5seconds. Each pump should be capable of
delivering water at 2.3litre /second against
a positive head of 55 metres. The pumps
shall be supplied complete with control
panel, pressure vessel, pressure gauge,
pressure switch float switch and any other
necessary fittings . This is strictly a fire
hosereel pump set and must be fire rated.
Pumps to be as Grundfos CR10-6 or equal
and approved.
0 No. 0
M1.17 Testing and commissioning item 1
M1.18 Contingency item 1 200,000
M1.19Total for hosereels system cf to
VOLUME 02 summary PAGE
Page 135 of Vol 02
N PORTABLE FIRE EXTINGUISHER
Item DescriptionUnit
sQty
Rates
(Kshs.)
VAT
INCL
Costs
(Kshs)
N1.01 4.5kg CO2 gas fire extinguisher No 99
N1.02 9 litre water fire extinguisher No 99
N1.03 9 Kg DCP fire extinguisher No 99
N1.04 Fire ball extinguisher No 2
N1.05 Fire blanket No 2
N1.06 Contingency item 1 300,000
N1.07
Total for portable Fire
Extinguishers cf to
VOLUME 02 summary
PAGE
Supply, and install the following fire
fighting equipment (stored in vandal
proof protective cabinets) manufactured
to BS EN3 and are in themselves
something of established standard for
quality around the world
Page 136 of Vol 02
O SPRINKLER INSTALLATIONS
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs (Ksh.)
O1.01
1No. Electrically driven Pump Fire rated.
The pump to be capable of delivering 1000
gpm at set pressure of 10 bars each
(minimum) complete with isolating valves,
non-return valves, strainers, pressure
gauges and automatic Engine starting
Mechanism to be comnected to the control
panel. Electric Fire Pump Controllers shall
be fire rated and designed to control and
monitor the fire pumps, fulfilling the
requirements described by the fire-pump
controller standards. .The fire-pump
controllers monitor the operation status and
in the case of fire, the controller will
receive a signal from the pressure switch
and start the fire-pump. Fire controllers
shall be wired fail-safe, and in the event of
any control cable becoming loose will start
the fire pumps. The controllers shall
operate the pumps in an automatic on /
manual off condition. Once the fire pump
has started via the controller, shall not stop
until it is manually shut down.n. The fire
pump shall comply to NFPA standards.The
pump to be as bristol or equal and
approved.
No. 1
Supply Install test and commisstion and paint the appropriate colour code (signal
red) the following fire fighting pipe work. Materials for piping and the standards
covering these installations shall be as described in NFPA 13. Black or galvanized
steel pipe shall be either ASTM A 53 seamless PRESSED grooved for pipe bigger
than 65mm while 50mm and below to be threaded or electric welded,all Tees shall be
grooved mechanical tees Grade A or B to Engineers approval
Page 137 of Vol 02
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs (Ksh.)
O1.02
Jockey pump Capable of delivering
50L/Min at set pressure of 7.0 bars each
(minimum) complete with isolating valves,
non-return valves, strainers, pressure
gauges and automatic Engine starting
Mechanism to be comnected to the control
panel
Jocky Fire Pump Controllers shall be
designed to control and monitor the fire
pumps, fulfilling the requirements
described by the fire-pump controller
standards. The The fire-pump controllers
monitor the operation status and in the case
of fire, the controller will receive a signal
from the pressure switch and start the fire-
pump. Fire controllers shall be wired fail-
safe, and in the event of any control cable
becoming loose will start the fire pumps.
The controllers shall operate the pumps in
an automatic on / manual off condition.
Once the pressure drop the duty jockey
pump shall start and in event it is unable
build up pressure the system shall start
automatically shall not stop until it is
manually shut down. The pump to be as
bristol or equal and approved.
No. 1
Page 138 of Vol 02
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs (Ksh.)
O1.03
Fire Rated Fire fighting Pump set comprising of :
1No. Diesel driven Pump . The pump to be
capable of delivering 1000gpm at set pressure of
10.0 bars each (minimum) complete with
isolating valves, non-return valves, strainers,
pressure gauges, engine, 200 litre Diesel storage
tank full of diesel and automatic Engine starting
Mechanism to be comnected to the control panel
Diesel Fire Pump Controllers shall be fire rated
and designed to control and monitor the fire
pumps, fulfilling the requirements described by
the fire-pump controller standards. The fire-
pump controllers monitor the operation status
and in the case of fire, the controller will receive
a signal from the pressure switch and start the
fire-pump. Fire controllers shall be wired fail-
safe, and in the event of any control cable
becoming loose will start the fire pumps. The
controllers shall operate the pumps in an
automatic on / manual off condition. Once the
fire pump has started via the controll. the pump
shall comply to NFPA standards. The pump to be
as bristol or equal and approved.
No. 1
O1.04300litres diaphragm pressure vessel rated
10barNo. 1
O1.05 Sprinkler control system item 1
O1.06Sprinkler pumps pressure switch with the
drain cork and pressure guagesNo. 1
O1.07 Low level Float switch No. 1
O1.08 100mm dial pressure guages No. 1
O1.09
Electrical connection from the isolator to
the control panel and from control to
electric motor including cabling and
conduiting
item 1
O1.10Control panel to suit the pumps controls as
described above item 1
O1.11
Sprinkler system installation control vavle
of wet system type, complete with stop
valve, alarm valve, combine drain and test
valve , pressure guages, alarm motor stop
valve, strainers, alarm motor and gong, as
manufactured by Mather and Platt of
England or equal approved.
item 1
Page 139 of Vol 02
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs (Ksh.)
O1.11
Sprinkler system installation zone control
valves dia 100mm complete with flow
gauge and pressure gauge 100mm dial
item 12
O1.12
Pendant sprinkler head with universal
deflector and standard response 68 DEG K
factor 5.6 to NFPA standards
No. 1250
O1.13Sprinkler accessories cabinates complete
with sprinkler wrenches and spannersNo. 1
O1.14
150mm diameter check valve as
GLENFIELD incorporating strainer and
flanges
No. 2
O1.14 150mm diameter control valve No. 3
O1.15 Spare sprinkler heads No. 50
O1.16
100mm diameter fire brigade 2-way
breeching inlet valve comlplete with
cabinet to be connected to the sprinkler
system
No. 1
O1.17 150mm Diameter tubing in wall and ceiling LM 155
O1.18 100mm Diameter tubing in wall and ceiling LM 550
O1.19 80mm Diameter Ditto LM 75
O1.20 65mm Diameter Ditto LM 250
O1.21 50mm Diameter Ditto LM 815
O1.22 40mm Diameter Ditto LM 685
O1.23 32mm Diameter Ditto LM 1107
O1.24 25mm Diameter Ditto LM 1502
O1.25 150 x 150 x 150 x 150mm grooved Cross No. 6
O1.26 100 x 100 x 100 x 100mm grooved Cross No. 6
O1.27 150 x 150 x 150mm Grooved Tee No. 15
O1.28 150 x 150 x 100mm Grooved Tee No. 3
O1.29 150 x 150 x 50mm Grooved Tee No. 3
O1.30 150 x 100 x 100mm Grooved Tee No. 6
O1.31 100 x 100 x 100mm Grooved tee No. 24
O1.32 100 x 100 x 80mm Grooved tee No. 4
O1.32 100 x 100 x 65mm Grooved tee No. 64
O1.33 100 x 100 x 50mm Grooved tee No. 135
O1.34 100 x 100 x 40mm Grooved tee No. 35
O1.35 80 x 80 X 65mm Grooved tee No. 5
O1.36 80 x 80 x 80mm Grooved tee No. 5
O1.37 80 x 80 x 50mm Grooved tee No. 26
O1.38 65 x 65 x 65mm Threaded tee No. 180
Page 140 of Vol 02
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs (Ksh.)
O1.39 65 x 65 x 50mm Grooved tee No. 6
O1.40 65 x 65 x 25mm tee No. 10
O1.41 65 x 50 x 50mm tee No. 10
O1.42 50 x 50 x 50mm Threaded Tee No. 215
O1.43 40 x 40 x 40mm Threaded Tee No. 345
O1.44 32 x 32 x 32mm Threaded Tee No. 325
O1.45 25 x 25 x 25mm Threaded Tee No. 86
O1.46 150x 100mm Grooved reducer No. 15
O1.47 100x 80mm Grooved reducer No. 12
O1.48 100x 65mm Grooved reducer No. 5
O1.49 100x 50mm Grooved reducer No. 3
O1.50 80x 65mm Grooved reducer No. 9
O1.51 65x50mm Threaded reducer No. 85
O1.52 65x40mm Threaded reducer No. 55
O1.52 65x25mm Threaded reducer No. 5
O1.52 65x20mm Threaded reducer No. 135
O1.53 50x40mm Threaded reducer No. 243
O1.54 50x32mm Threaded reducer No. 65
O1.55 50x20mm Threaded reducer No. 135
O1.56 40x32mm Threaded reducer No. 295
O1.57 40x25mm Threaded reducer No. 25
O1.58 40x20mm Threaded reducer No. 351
O1.59 32x25mm Threaded reducer No. 380
O1.59 32x20mm Threaded reducer No. 298
O1.60 25x20mm Threaded reducer No. 328
O1.61 150 x150mm Grooved Elbow No. 3
O1.62 100x100mm Grooved Elbow No. 5
O1.62 80x80mm Grooved Elbow No. 5
O1.63 65x65mm Threaded Elbow No. 10
O1.64 50x50mm Threaded Elbow No. 10
O1.65 40x40mm Threaded Elbow No. 10
O1.66 32x32mm Threaded Elbow No. 5
O1.67 25x25mm Threaded Elbow No. 265
O1.68 150x150mm grooved coupling No. 133
O1.69 100x100mm grooved coupling No. 387
O1.70 80x80mm grooved coupling No. 65
O1.71 65x65mm grooved coupling No. 435
O1.64 50x50mm Threaded coupling No. 117
O1.65 40x40mm Threaded coupling No. 25
O1.66 32x32mm Threaded coupling No. 400
O1.67 25x25mm Threaded coupling No. 570
O1.7220mm plugs with 15mm threaded screws
for sprinkler headsNo. 1000
O1.73 150mm Diameter check Valves No. 1
Page 141 of Vol 02
Item Description Units Qty
Rates
(Kshs.)
VAT
INCL
Costs (Ksh.)
O1.74150mm diameter Monitored butterfly valve
incorporating flanges. No. 3
O1.74100mm diameter Monitored butterfly valve
incorporating flanges. No. 12
O1.7582.2mm Diameter Orifice plastes as per
F.O.C. Rules for 100mm pipesitem 2
O1.76
Pipe Hangers
As Hira walraven BIS Heavy Duty
Industrial Clamps, 5'' Locking Bolts,
HD1501 (M8/10, M10/12 (cat No. BUP
1000),BIS Rubber Lined Split Clamp,All
hangers to be sound insulating as DN 4109,
and 800mm raw bolt. All the hangers to be
equaly spaced at a distance of 600mm.for
the entire length of the pipeline and shop
fabricated angline hangers to engineers
approval
item 1
O1.77 Sprinkler system flow switch and drain item 16
O1.78
Allow for painting to Engineers
requirement and colour coding to BS 1710:
1984 (1991). To engineers approval
item 1
O1.79
Allow for testing the heads of the Sprinkler
installation system during progress of the
works and again at the completion to the
satisfaction of the Engineer and the Local
Authority
Item 1
O1.80
Allow for other items not listed above but
necessary for the correct and satisfactory
functioning of the sprinkler system (please
Specify here Below)
0
O1.81 0
O1.82 0
O1.83 0
O1.84 Contingency item 1 800,000
O1.85Total for sprinkler cf to VOLUME 02
summary PAGE
Page 142 of Vol 02
P
Item DescriptionUNI
T
QT
Y
Rates
(Kshs.)
VAT INCL
AMOUNT
(Kshs.)
P1.01
150mm diameter fire brigade 2-way breeching
inlet valve complete with cabinate to be
connected to the sprinkler system
No. 1
P1.02 100mm Diameter tubing on wall LM 387
P1.03 65mm Diameter Ditto LM 43
P1.04 100 x 100 x 65mm tee No. 86
P1.05 100x 65mm reducer No. 86
P1.06 100mm Bend No. 32
P1.07 100mm Diameter Unions No. 4
P1.08 100mm flanges No. 75
P1.09 65mm flanges No. 145
P1.10
65mm dry riser Landing valve c/w dry riser
landing valve box with standard label and
chain cap
No. 86
P1.11
Hose crandle; 30m long x64mm bore
collapsible flat hose pipe with swinging angle
of 180o complete with Nozzle.
No. 86
WET RISER INSTALLATIONS
Supply and install the following dry riser equipments manufactured in accordance
with BS 5041 part 2. The valves have instaneous coupling to BS 336 for connection to
fire fighting hose.S The installion to be as described in NFPA . Black or galvanized
steel pipe shall be either ASTM A 53 seamless grooved for pipe bigger than 65mm
while 50mm and below to be threaded or electric welded,all Tees shall be grooved
mechanical tees Grade A or B to Engineers approval
Page 144 of Vol 02
Item DescriptionUNI
T
QT
Y
Rates
(Kshs.)
VAT INCL
AMOUNT
(Kshs.)
P1.12
Automatic duplicate (2No.) Wet riser water
booster pumps set comprising one duty the
other standby. The pumps Shall be set such
that if the duty pump fails to start, the standby
shall start automatically within 5seconds. Each
pump should be capable of delivering water at
10 litre /second against a positive head of 100
metres. The pumps shall be supplied complete
with control panel, pressure vessel, pressure
gauge, pressure switch float switch and any
other necessary fittings . This is strictly a fire
hosereel pump set and should be to be as
Grundfos CR10-6 or equal and approved. Must
be compatible to modbus BMS protocol and
sim card provision.
Set 0
P1.13
Supply, instal, Test and Commission Wet
Riser set
Comprising of CR 32-8 (duty and standby) for
30M3/hr at
10 bar, The pumps shall be supplied complete
with control
panel, pressure vessel, pressure gauge, pressure
switch and
any other necessary fittings.
Set 0
P1.14Allow for painting to Engineers requirement
and colour coding to BS 1710: 1984 (1991).item 1
P1.15 Testing and Commissioning Item 1
P1.16 Contigency Item 1 300,000
P1.17Total for Wet riser cf to VOLUME 02
summary PAGE
Page 145 of Vol 02
ITEM DESCRIPTIONCosts (Kshs.) VAT
INCL
Q1.02 Block A
Q1.03 3 Bedroomed House Units DSQ (64 No. Units)
Q1.04 Block B
Q1.05 3 Bedroomed House Units DSQ (32 No. Units)
Q1.062 Bedroomed House Units WITHOUT DSQ ( 64 No.
Units)
Q1.07 Block C
Q1.082 Bedroomed House Units WITH DSQ (62 No.
Units)
Q1.092 Bedroomed House Units WITHOUT DSQ ( 2 No.
Units)
Q1.10 Block D
Q1.112 Bedroomed House Units WITH DSQ (62 No.
Units)
Q1.122 Bedroomed House Units WITHOUT DSQ ( 2 No.
Units)
Q1.03 Care Takers House
Q1.14 Guard House
Q1.15 Swimming Pool Changing rooms
Q1.16 Common GF Washrooms
Q1.17 Common Soil waste Water Drainage
Q1.18 Common Parking FL Water Drainage
Q1.19 Common Rain Water Drainage
VOLUME 02 PRICE SUMMARY PAGE
Page 146 of Vol 02
ITEM DESCRIPTIONCosts (Kshs.) VAT
INCL
Q1.20 Water Reticulation incl Tanks & Pumps
Q1.21 Firefighting - Hosereel
Q1.22 Firefighting - Portables
Q1.23 Firefighting - Sprinkers
Q1.24 Firefighting - Hybrid/Sprinkler Wet riser
Q1.25 PC Sum- Water Treatment Plant 7,540,000
Q1.27
Sum for training of client / user (At least 5 No.
Users). The trained personnel must sign against the
items they were trained on and this submitted to the
engineer as part of completion document
Q1.28
Sum for Testing and commissioning of the entire
installations set complete with all accessories,
interconnections, controls, BMS link & activation
and the necessary programing where necessary.
Q1.29
Sum for 24 months comprehensive maintenance
(Consumable, parts and labour) from date of practical
completion.
Q1.30
Total for Plumbing Drainage & FireFighting
VAT inclusive to GRAND PRICE SUMMARY
PAGE IN VOLUME 01
Page 147 of Vol 02
VOLUME 03 OF
PLUMBING DRAINAGE, FIREFIGTING,
SWIMMING POOL AND SOLAR WATER
HEATING
Solar water heating system: Supply and install
A1
Item Description Unit Qty
Rates
(Kshs.)VAT
INCL
Cost
(Kshs.)
Solar collecting panels
A1.01
2.3m2 solar panels of complete with
insulation, high heat absorbing surface made
from absorptive aluminium, nickel or titanium
surface with blue selective coating technology,
one-piece nodized profile and a safety glass
with high permiability. High operating
temperature. Heat exchanger of copper tubes,
50 mm fibre glass insulation, all the necessary
interconnectors, brass interconnectors,
dielectric unions, washout valves, pressure &
Temperature release valves, and air release
valve. Mild steel support framework, tiled roof
underlay and any other accesories for the solar
panels to Engineers Approval. Solar panels
shall be manufactured and tested as per EN
12975 & EN 12976. The solar collector panels
to be certified according to SOLAR
KEYMARK CERTIFICATION
set 416
The Contractor shall suppy and install solar panels as described
below: The bidder must allow for repair of any damage incured
in the course of their works.Catalogues and brochures must be
attached to the bid. Source of the panels and Hotwater cylinders
must be indicated clearly.
Page 1 of Vol 03
Item Description Unit Qty
Rates
(Kshs.)VAT
INCL
Cost
(Kshs.)
A1.02
Indirectly heated Solar HWC capacity 250
liters Manufactured from mild steel or stainless
steel. The cylinder capable of maximum
working pressure of 10bars,operating
temperatures of 95 deg celsius and water test
pressure of 15 Bars. steel coil tubes maximum
pressure tested at 25bar. 1x3kw immersion
heater c/w thermostats, sensors thermomerter
and any necesssary accesories. Corrosion
protected with high quality glass-enamel
coating and anode protection rod. Polyurethane
foam Insulation thickness 50- 65mm thickness
insulation of 40-55kg/m3 polyurethane, inlet
and outlet fittings, Automatic Air- vent with a
gauge, 2. etc. the Cylinder to comply to EN
12976-1,10130/2006,DIN 4753-3 .
No 96
A1.03
Indirectly heated Solar HWC capacity 200
liters Manufactured from mild steel or stainless
steel. The cylinder capable of maximum
working pressure of 10bars,operating
temperatures of 95 deg celsius and water test
pressure of 15 Bars. steel coil tubes maximum
pressure tested at 25bar. 1x3kw immersion
heater c/w thermostats, sensors thermomerter
and any necesssary accesories. Corrosion
protected with high quality glass-enamel
coating and anode protection rod. Polyurethane
foam Insulation thickness 50- 65mm thickness
insulation of 40-55kg/m3 polyurethane, inlet
and outlet fittings, Automatic Air- vent with a
gauge, 2. etc. the Cylinder to comply to EN
12976-1,10130/2006,DIN 4753-3 .
No 192
Page 2 of Vol 03
Item Description Unit 0
Rates
(Kshs.)VAT
INCL
Cost
(Kshs.)
A1.04
Pump Station: The assembly consists of all
required components such as duty and standby
3-speed circulator pump as Grundfos UPS 200
series 65-120 , the gravity brake, the pressure
relief valve, air bleeding valve, the pressure
gauge, Temperature gauge, a full bore isolating
valve in the flow and return with integral
thermometer, a flow meter and thermal
protection, Pegler Gate Valves and non return
valves, and expansion Vessel [200L].
Item 36 -
A1.05
Differential Temperature controller with sensor
located at the top of the collector (hottest
point) and the return line to the panels (Coldest
point). This is to operate the glyco re-ciculator
pump to open/close on at preset temperature
differential.
No 288 -
A1.06
Solar controller capable of controlling Electric
Heat element, at preset time & temperature,
and three-way diverter solenoid valve
No 36
A1.07
Supply and install pipework as described
below. Materials for piping fibre reinforced
PPR or greater. Contractor should factor in
rates for Hot water pipe inslulation using
24mm thick Class 'O' Almaflex flexible, closed
cell, elastometric, nitrile rubber insulation.
Bidder to allow for ready mixed (50%/50%)
propylene glyco as Tyfocor L in the system
A1.08 40mm pipes Lm 1080
A1.09 32mm ditto Lm 2160
A1.10 25mm ditto Lm 864
A1.11 40mm Tee pipes No 288
A1.12 32mm ditto No 288
A1.13 25mm ditto No 288
A1.14 40mm bend/elbows No 144
Page 3 of Vol 03
Item Description Unit Qty
Rates
(Kshs.)VAT
INCL
Cost
(Kshs.)
A1.15 32mm ditto No 72
A1.16 25mm ditto No 180
A1.1740x32mm reducer
No 36
A1.18 40x25mm No 54
A1.19 32x25mm No 144
A1.20 40mm Gate valves as peglar No 54
A1.21 32mm Gate valves as peglar No 36
A1.22 25mm Gate valves as peglar No 576
A1.23Non-Return Valve:25mm non-return valve as
peglarNo 72
A1.24
Diverter Valve: 25mm Three-way diverter
solenoid Valve operating on temperature
differential including all other components for
the proper working of the system.
No 288
A1.25 Ball Valve: 32mm Three-way ball Valve No 288
A1.26 Glyco refilling Valve; 32mm valve No 36
A1.27 Flow balancing valve; 25mm No 54
A1.28 Contigency Item 1 1,000,000
A1.29Sub Total for 288 units to Solar Price
summary Page
Page 4 of Vol 03
A2 Solar Price Summary page
A2.02 Sub Total for 288 units Item 1
A2.03
Allow for electrical connections from the
nearest power source. This includes RCBO
protection, 20Amp DP control switch with
neon indicator, wiring and conduiting. [Note:
power will be brought to within 2m to the
equipment
Item 1
A2.04
Allow for galvanised black steel pipes for solar
panels interconnections, and pipe connection
upto the riser ducts to the panels complete with
insulation as almaflex insulation material equal
and approved.
Item 1
A2.06
Sum for testing, system configuration &
commissioning of the entire installations set
complete with all accessories, interconnections,
controls and the necessary programing.
Item 1
A2.07
Sum for 24 Months comprehensive
maintenance (Consumable, parts and labour)
from date of practical completion.
Item 1
A2.08
Total Price for VOLUME 3 (Solar Water
Heating System) VAT INCL to GRAND
PRICE SUMMARY IN VOLUME 01
Page 5 of Vol 03
VOLUME 04 OF
PLUMBING DRAINAGE,
FIREFIGTING, SWIMMING POOL
AND SOLAR WATER HEATING
SWIMMING POOL INSTALLATIONS
Item Description Unit Qty Rates
(Kshs.) Cost (Kshs.)
A1.01
Pool Pump: DPL 1100 VS Variable Speed
pump 2No. Duty and assisting capable of
delivering water at a Flow rate of 14 m3/h
each against a head of 20M, When any of
the pump reaches 75% of its peak
performance the other should come on
automatically. The pump shall be supplied
complete with Control panel with timer,
cabling, pressure gauges, switch, flanges,
connectors, joints, connect to the outlet
pipe work and also where necessary pipes
clips, holderbats plugged and screws and
brackets, The pump must be Must be
compatible to modbus BMS protocol and
sim card provision.
Set 1
A1.02
Pool Filter, Diameter 630 x720mm
complete with media. To be as DAYLIFF
Superflo Q160 or equal and approved.
No 2
A1.03
Portable Chemical Test Kit (Test residual
Chlorine and pH) as Astralpool/JV, or equal
and approved.
No 1
A1.04
Water Test Gauge, Autodetection of
circulating water PH value and OPH,
dosage auto control of chroline. To be as
Chemtrol/JV, Seko/JV, Aqua/JV
No. 1
A1.05Certikin eyeball wall inlets of 5m
3/h c/w
water barNo. 6
A1.06Total For VOLUME 04 (swimming pool
Installations) With VAT c/f to GRAND No. 5
The Contractor shall supply and Install the Works. Technical data for all installations and shop
drawings must be attached.
NOTE: The systems are Manufacturers designed. All the Quantities, sizes and fittings must be verified by the bidders
and in event of an omission in this bid document, the bidder shall insert the additional item/s on item No.A1.19.
Otherwise any additional cost emaniting from omitted items or malfunctioning of the system shall be born by the
bidder.
Page 2 of Volume 04
Item Description Unit Qty Rates
(Kshs.) Cost (Kshs.)
A1.07Certikin HD33D 220mm x 150mm sunction
outlet of 5m3/h c/w water bar
No. 8
A1.08 4 Step stainless steel ladder No. 3
A1.09
Handrail complete with bracket. All
handrail and support fixtures shall be
polished Stainless of 43 mm tube diameter.
LM 70
A1.10600mm grating made of polypropylene (PP)
and stabilised against UVLM 40
A1.11
Life Buoy in orange plastic with Exterior
diameter of 730 mm. To be as astralpool or
equal and approved.
No. 3
A1.12 125W Double transformers for lights No. 2
A1.13
LED lights 15W underwater lights with
seven colour changing light with selectable
remote control c/w adapter flange to convert
sealed beam niches to accept replacement
LED alternatives. Also to include deck
boxes
No. 6
A1.14CLEARWATER C170S salt water
chlorinatorNo. 1
A1.15
Dosing Pump: Automatic capable of dosing
13Lts/hr. The pumps shall be supplied
complete Electromagnetic diaphram pulse
and any other necessary fittings . The pumps
to be as Miltonroy/US, ProMinent/GER,
GB/BJ
No. 1
A1.16
Dosing Bucket capacity 200Litres, the material
shall be P.E. The Dosing Bucket to be as
GB/BJ
No. 1
A1.17
Cleaning equipment comprising Vacuum
sweeper, 2x12m vacuum hose, hose
connector, floor brush, algae brush, leaf
rake, leaf skimmer, 2 No. aluminium
handles and pool water test kit
Item 1
A1.18
4 Probe Type Water Control Module, Stop
pump at the Lowest water Level. Lower
Limit water-Level auto replenished and the
upper stopped auto. To be as Omron/JP,
Fuji/JP, Mitsubishi/JP or equal and
approved.
Item 1
A1.19 Any other additional items
A1.20Sub - total for equipment With VAT c/f
to Price Summary page
Page 3 of Volume 04
Item Description Unit Qty Rates
(Kshs.) Cost (Kshs.)
A2
A2.01 DN100mm with water bar Lm 60
A2.02 DN75mm Ditto No 4
A2.03 DN50mm Ditto Lm 155
A2.04 DN40mm Ditto Lm 18
A2.06 DN100mm Bends and Elbows No 8
A2.07 DN75mm Ditto No 0
A2.08 DN50mm Ditto No 42
A2.09 DN40mm Ditto No 4
A2.11 DN100mm Tee No 14
A2.12 DN75mm Ditto No 0
A2.13 DN50mm Ditto No 18
A2.14 DN40mm Ditto No 2
A2.16 100x75 Reducer No 6
A2.17 100x50 Ditto No 4
A2.18 75x50 Ditto No 8
A2.19100mm butterfly valve with EPDM seals as
Astralpool or equal and approved.No 2
A2.20
100mm PVC-U double union ball valve (PE-
EPDM) as Astralpool or equal and
approved.
No 2
A2.21 DN75mm Ditto No 0
INTERNAL PLUMBING WORKS - Supply and install
Supply and install the following in Polyehtylene PN20 pipes internal water
pipework systems with fittings fixed and welding to be in accordance to the
manufacturer’s printed instructions as described. All Polyehtylene pipes
bends,Tees,reducing Tees,reducers, etc. are to be formed in accordance to
the manufacturer’s printed instructions. The installations to have the various
sizes of connectors, adaptors, sockets, reducers holdbats, paddle flanges,
clips etc. as required for satisfactory functions.
Page 4 of Volume 04
Item Description Unit Qty Rates
(Kshs.) Cost (Kshs.)
A2.22 DN50mm Ditto No 3
A2.23 DN40mm Ditto No 2
A2.25
DN40Vacuum breaker Valve, as VAC-
Alert, Hayward, Astralpool or equal and
approved
Pcs 0
A2.26
DN100mm PVC-U wafer check valve plain
with EPDM seals as Astralpool or equal and
approved.
No 2
A2.27 DN75mm Ditto No 2
A2.28 DN50mm Ditto No 4
A2.29 DN40mm Ditto No 0
A2.31 DN100 pipe sockets No 27
A2.32 DN75mm Ditto No 1
A2.33 DN50mm Ditto No 52
A2.34 DN40mm Ditto No 6
A2.36 DN100mm pipe Unions No 30
A2.37 DN75mm Ditto No 2
A2.38 DN50mm Ditto No 10
A2.39 DN40mm Ditto No 9
A2.41
Sub - total for Plumbing With VAT c/f to
SWIMMING POOL Price Summary
page
Page 5 of Volume 04
ITEM DESCRIPTION COST(KSH)
1 Swimming Pool equipment Installations
2 Swimming Pool plumbing Installations
3 PC sum for water Feature 406,000
4 Contigency 250,000
5
Sum for testing, system configuration & commissioning of the entire
installations set complete with all accessories, interconnections, controls
and the necessary programing.
6
Sum for training of client / user (At least 5 No. Users). The trained
personnel must sign against the items they were trained on and this
submitted to the engineer as part of completion document
7Total For VOLUME 04 (swimming pool Installations) With VAT
c/f to GRAND PRICE SUMMARY PAGE IN VOLUME 01
SWIMMING POOL SUMMARY PAGE
Page 6 of Volume 04