1
The Voltage Controller for Servo Stabilizer (VCSS) senses the output voltage of the Voltage Stabilizer (230 V AC) and controls it within the set limits. The control limits are set by setting the Level & Gap settings. When the output voltage goes outside the set limits, the output Raise / Lower signal is given after the set delay is over. LED indication is provided to indicate the control action and a pair of NO contacts for Raise/Lower closes depending on whether the voltage has to be Raised or Lowered.Provision for setting Undervoltage (UV) and Overvoltage (OV) limits is also available. A pair of C/O contacts for both UV & OV is provided for external use (alarm or trip). A hysteresis of approximately 1V is provided for Raise & Lower & 5V for UV & OV. EE-401 Display for Control Vg. and Parameter setting Level & Gap settings for setting limits Variable Time Delay settings Features Auxiliary Supply : 95 to 350 V AC/DC Level Setting : Adjustable from 207V to 253V Gap Setting : Adjustable from 2V to 20V Undervoltage Setting : Adjustable from 180V to 230V Overvoltage Setting : Adjustable from 220V to 260V Time Delay Setting : Adjustable from 1 sec to 10 sec Output Contacts : 1 pair of (NO) contacts each for Raise & Lower with 5A @ 240VAC or 24VDC contact rating. 1 pair of C/O contacts for UV & OV with same rating o o Operating Temp. : 0 C to 50 C Overall Size : 96mm X 96mm X 110mm (H X W X D) Projection mounting : 96mm Centre to Centre, 4Ø x 2 holes Panel mounting : 90 x 90 mm cutout Weight : 1Kg. (approx.) Technical Specifications Voltage Controller for Servo Stabilizer : EE-401 Independent Undervoltage & Overvoltage settings for cut off LED Indication for Raise, Lower, UV, OV & Time Delay Operations Projection / Wall mountng EMCO ELECTRONICS Unit No. 13, Kedarnath, Tungareshwar Industrial Complex No. 1, Sativali, Vasai (E), Thane - 401 208. Factory : Tel.: +91-250-648 1782 / 1804 / 0114. E-mail : [email protected] www.emcoelectronics.org 302, Vasan Udyog Bhavan, Senapati Bapat Marg, Opp. Phoenix Mill / Big Bazar, Lower Parel (W), Mumbai - 400 013. H.O. : Tel.: +91-22-2490 2283 / 2492 3183 E-mail : [email protected] 15, Wood Street, (1st Floor) Richmond Road, Bangalore - 560 025. South : Tel.: +91-80-2557 0251 E-mail : [email protected] An ISO 9001:2008 Mfg. Co. Note : Images shown are for representational purpose only. Actual Product may differ. Product specifications are subject to change without prior notice.

Voltage Controller for Servo Stabilizer : EE-401emcoelectronics.org/wp-content/uploads/Catalogs_UM...The Voltage Controller for Servo Stabilizer (VCSS) senses the output voltage of

  • Upload
    others

  • View
    18

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Voltage Controller for Servo Stabilizer : EE-401emcoelectronics.org/wp-content/uploads/Catalogs_UM...The Voltage Controller for Servo Stabilizer (VCSS) senses the output voltage of

The Voltage Controller for Servo Stabilizer (VCSS) senses the output voltage of the Voltage Stabilizer (230 V AC) and controls it within the set limits. The control limits are set by setting the Level & Gap settings. When the output voltage goes outside the set limits, the output Raise / Lower signal is given after the set delay is over. LED indication is provided to indicate the control action and a pair of NO contacts for Raise/Lower closes depending on whether the voltage has to be Raised or Lowered.Provision for setting Undervoltage (UV) and Overvoltage (OV) limits is also available. A pair of C/O contacts for both UV & OV is provided for external use (alarm or trip). A hysteresis of approximately 1V is provided for Raise & Lower & 5V for UV & OV.

EE-401

Display for Control Vg. and Parameter settingLevel & Gap settings for setting limitsVariable Time Delay settings

Features

Auxiliary Supply : 95 to 350 V AC/DCLevel Setting : Adjustable from 207V to 253VGap Setting : Adjustable from 2V to 20VUndervoltage Setting : Adjustable from 180V to 230VOvervoltage Setting : Adjustable from 220V to 260VTime Delay Setting : Adjustable from 1 sec to 10 secOutput Contacts : 1 pair of (NO) contacts each for Raise & Lower with 5A @ 240VAC or 24VDC contact rating.

1 pair of C/O contacts for UV & OV with same ratingo oOperating Temp. : 0 C to 50 C

Overall Size : 96mm X 96mm X 110mm (H X W X D)Projection mounting : 96mm Centre to Centre, 4Ø x 2 holesPanel mounting : 90 x 90 mm cutoutWeight : 1Kg. (approx.)

Technical Specifications

Voltage Controller for Servo Stabilizer : EE-401

Independent Undervoltage & Overvoltage settings for cut offLED Indication for Raise, Lower, UV, OV & Time Delay OperationsProjection / Wall mountng

EMCO ELECTRONICSUnit No. 13, Kedarnath, Tungareshwar Industrial Complex No. 1, Sativali,Vasai (E), Thane - 401 208.

Factory : Tel.: +91-250-648 1782 / 1804 / 0114.

E-mail : [email protected]

www.emcoelectronics.org

302, Vasan Udyog Bhavan, Senapati Bapat Marg, Opp. Phoenix Mill / Big Bazar, Lower Parel (W), Mumbai - 400 013.

H.O. :

Tel.: +91-22-2490 2283 / 2492 3183 E-mail : [email protected]

15, Wood Street, (1st Floor) Richmond Road, Bangalore - 560 025.South : Tel.: +91-80-2557 0251 E-mail : [email protected]

An ISO 9001:2008Mfg. Co.

Note : Images shown are for representational purpose only. Actual Product may differ. Product specifications are subject to change without prior notice.