Certi�cation & Listings:Project Information:

Fixture Type:

Date:

Job Name:

Comments:

Catalog #:

VOL Voyager series

Ordering Guide / Example

The Voyager series is part of our Occu-Smart® product line. Equippedwith an integral ultrasonic motion sensor, the VOL features bi-leveloperation with adjustable standby light levels and time delay formaximum energy savings. These luminaires are ideal for corridors,stairwells, restrooms, laundry rooms and other areas where maximumlight levels are not required on a constant basis

Ultrasonic motion sensors are ideal for stairwells and corridors where 360˚ coveragecan detect motion beyond the line of sight around barriers such as staircases,workspace partitions, shelves and other obstacles in the area

See page 2 for lumen chart, dimensions & application notes

RRU-2 emergency shunt relay(see options)

LaMar Lighting Co., Inc. 485 Smith Street, Farmingdale, NY 11735 | tel 631.777.7700 fax 631.777.7705 | www.lamarled.com

VOLSeries

VOL = Voyager

Size

24 = 2’48 = 4’72 = 6’96 = 8’

Power

L = LowM = MediumH = High

Lens Options

FA = Frosted polycarbonatePF = Perforated metal (white)

CCT

30 = 3000K35 = 3500K40 = 4000K50 = 5000K

Standby Options

FO = Full on/o� operationAS = User selectable standbyoptions 5, 10, 30% nominallight output (factory shipped 10%standby level)

General Options

EM = Emergency pack >90 min., >500 lumens(higher output & run time available - consult factory)RRU21 = 120V emergency shunt relay (must specify)RRU27 = 277V emergency shunt relay (must specify)

Consult factory for additional options not shown or listed Correlated Color Temperatures (CCTs) fall within the nominal range as per ANSI C78.377A

S3

simple sensor solutions

WARRANTY

YEAR

Par

ts R

epla

cem

ent Parts R

eplacem

ent5

� � � �� � � �� � � � � � � � �

U S A

DES

IGNED BUILT SUPPORTED

80+

CRI

Speci�cations subject to change without notice - Rev 1019

VOL48FA-35AS

Features and Speci�cations:

Durable steel housing and die formed end capsE�cient LED formula impact resistant di�user, smooth exterior for easycleaning, retained by captive ends and linear channels

Construction:

Highly sensitive ultrasonic motion sensor detects motion outside direct lineof sightEasy setup with 5 minute walk test modeAdjustable sensitivity and time delay of 5, 10, 15 or 30 minutes

Sensor:

Available in 2’, 4’, 6’ & 8’ lengthsSize Options:

UL listed, ADA compliantIBEW Union made in the USA, Meets Buy America Act (ARRA)AS models are Design Lights Consortium® (DLC) quali�ed luminaires

Listing & Ratings:

Suitable for wall, ceiling or stem mountingMounting Options:

Universal voltage 120-277V standardOptional emergency backup available

Driver:

5 years - part replacement only (see our terms & conditions page atwww.lamarled.com for details)

Warranty:

Metal core (MPCB) boards for cooler operation and longer service life areassembled in the USA with Samsung 561 LEDs

LED:

Ultrasonic

re�ected wave

original wave (360˚)

Dimensions

LED Wattage Chart - 5000K

Application Notes

Speci�cations subject to change without notice - Rev 1019

LaMar Lighting Co., Inc. 485 Smith Street, Farmingdale, NY 11735 | tel 631.777.7700 fax 631.777.7705 | www.lamarled.com

Protected by one or more US PatentsNos. 7,271,543 & 7,081,715

LaMar Lighting assumes no responsibility for misapplication of �xturesDue to the rapid advancements in LED technology, please consult our website for the most current technical data.

BEFORE INSTALLATION, PLEASE CONSULT YOUR LOCAL ORDINANCES AND BUILDING CODES FOR COMPLIANCE

For safety and compliance purposes in areas designated as emergency egress, we recommend choosing a standby light level that will provide minimum code compliant lightlevels while in the standby mode (in most municipalities, this is 1 FC average)

Occu-smart bi-level LED lighting complies with ashrae 90.1-2010 and meetsthe requirements of NYC Local Law 47

5000K color temp is recommended for use with phosphorescent tapeMany phosphorescent materials may not properly charge under LED light. It is the responsibility of the end user to determine suitability of the product for their speci�capplication - Units must be correctly adjusted to provide required minimum light levels (5000K LED units will charge most photoluminescent tape products)

Wattages shown are nominal and subject to industry tolerances

48”

24” 1.125”

3.5”

36”6”

7.8”

.875 KO

6”

4X 0.25”

4’ MODEL

3.99

2” 2”

.960 K.O.MOUSE HOLE

TYP8"

24”

7.8”

1.42”12”

5.5”

.250 Mntg Hole x2

5.5”13”

2’ Model

Units with emergency battery are U.L. listed when equipped with speci�c optional battery back-up and meet requirements of the life safety code/NFPA101, NEC/OSHA andmost state and local codes

VOL Voyager series

2’ (1 Board)

AS

4’ (2 Boards)

AS

15W - 1627 lu

3W/4W/5W

24.5W - 3138 lu

6W/8W/10W

23W - 2552 lu

4W/5W/8W

43W - 5018 lu

8W/10W/16W

28.5W - 2871 lu

5W/6W/9W

55W - 5978 lu

10W/12W/18W** AS versions shown as 5%, 10% and 30% of full light output

Low (L) Medium (M) - Std High (H)

For applications with backup generators requiring that connected bi-level lighting to be switched to full light output during power outages regardless of occupancy, werecommend our VOL series with emergency shunt relays