4
Visual Flame Detection Inputs/Output s 4-20mA to PLC or. Relay contacts to Fire Panel NFPA 72 Approved Video to display monitor 24 Volts DC Unit requires a two pair cable as a minimum for the relay output option and a 3 conductor cable for the 4-20mA option. Three pair cable if video is required.

Visual Flame Detection Video Connection

Embed Size (px)

Citation preview

Page 1: Visual Flame Detection Video Connection

Visual Flame Detection Inputs/Outputs4-20mA to PLC or.

Relay contacts to Fire PanelNFPA 72 Approved

Video to display monitor

24 Volts DC

Unit requires a two pair cable as a minimum for the relay output option and a 3 conductor cable for the 4-20mA option.Three pair cable if video is required.

Page 2: Visual Flame Detection Video Connection

Alarm

+24volts

Twisted Pair Cable

Coaxial Cable

Video Monitor

Basic Connection Topology

Page 3: Visual Flame Detection Video Connection

+24vdc +12vdc

Three pair twisted, individual screen instrument cable. One pair power, one pair video, one pair 4-20mA or relay output.

Coaxial cable

4-20mA to PLC/Fire & Gas Control System

Internal panel wiring twisted pair

Field terminals

This slide shows the basic design for a Visual Flame Detection system, including the VIPX1600 that will support up to 4, 8, 12 or 16 Cameras and provide video across Ethernet. If more than 16 detectors are required, then further VIPX1600’s may be added and connected together, through a network switch to the control system, in order to display video.

VIPX1600VTP4

Page 4: Visual Flame Detection Video Connection

Remote Video Transmission

Network

• Handles up to 16 cameras in increments of 4 inputs

• Allows video over IP

• Video viewed in a simple web browser

• Data recorded over a network

• Managed using video management s/w

• Direct external storage capability