Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
VISITOR SEATING ANVY
Australian made Anvy, AFRDI 6 & GECA approved visitor seating
Lic: C H S–200 8GECA- 28-2006 - Furniture and Fittings
VISITOR SEATING ANVY
The Anvy is a durable and comprehensive range of chairs designed in Italy.
A strong tubular frame made of 25mm diameter steel, - available in a choice of 4 leg or sled frame, moulded seat foams for comfort and durability, optional with arms.
All parts are made for easy dissasembly and covered by GECA, Ecospecifier, Earth Saver and tested to AFRDI 6.
Lowest carbon footprint guaranteed - produced in Sydney, Melbourne, Brisbane and Perth factories, saving precious fossil fuels in transportation. Go Green.
Specification
450
460
450
500
810
4 LEG - ARMS 4 LEG - NO ARMS
510610
OPTIONAL SLED LEG
VISITOR SEATING ANVY
ArmsBlack drop armNo arms
LinkingRemoveable plastic linksNo links
FrameBlack 4 leg*Chrome 4 legBlack Sled (Stacking - no arms)*Chrome Sled (stacking - no arms)Beam Seating Option- 2 seater- 3 seater- 4 seater- 5 seater*GECA Certified
Upholstery Quick ship in corporate navy, grey and black.All other fabrics available.
Frame - 4 Leg - 25mm tubular steel with 2mm wall thickness and cross braced under the seat.
Frame - Sled - 25mm tubular steel with 2mm 2wall thickness and cross braced under the seat.
Back - inner/outer plastics, PP05 resin code, 100% recyclable.
Seat - inner/outer plastics, PP05 resin code, 100%recyclable
Seat foam - Australian-made moulded seat FR CM2/5 combustion modified. HSS-60kg/m3 density and 200N hardness AS/NZS 4088.1 flammability, AS 2282.3 density.
Back foam - Australian-made foam. AS/NZS 4088.1 flammability, AS 2282.3 density.
Materials Options
AFRDI AS/NZS 4688 LEVEL 6 TESTING INCLUDES
STATIC LOAD TESTS- 200 kg on seat applied 20 times- 76 kg on back applied 10 times- 120 kg downwards on each arm applied 10 times- 90 kg outwards on each arm applied 10 timesThese are overload tests and not to be considered as normal working loads.
FATIGUE TEST LOADS- 120 kg on seat cycled 200,000 times- 41.5 kg on back cycled 200,000 times
IMPACT TESTS- 25 kg dropped onto seat 20 times from height of 300 mm
VISITOR SEATING ANVY
The following table shows the ‘end-of-life’ properties of the chair.
The Environment
MATERIAL TYPE CHAIR COMPONENT WEIGHT (KG)
% RECYCLED COMPONENT
% RECYCLABLE AFTER USE
PLASTIC Seat inner PP05 0.79 50% 100%
Seat outer PP05 1.05 50% 100%
Back inner PP05 0.75 50% 100%
Back outer PP05 0.87 50% 100%
STEEL 4 leg frame 3.6 0% 100%
ALUMINIUM
FOAM Moulded seat foam 0.5 0% 100%
FABRIC Dunlop back foam 0.2 0% 100%
PACKAGING Plastic bag 0.11 0% Biodegradable
Total 7.87 26% 100%
The Anvy has a full product stewardship programme for recycling at 4 locations - Sydney, Melbourne, Brisbane and Perth.
• Foams are crumbed and become carpet underlay
• Steel components are melted down for re-use
• Alloys are recycled
• All plastic and nylon parts are sorted into resin codes (eg. PPO5 or PPK20) for recycling
End of Life
The Anvy is also recognised as an Earth Saver product.
Anvy also has Ecospecifier accreditation.
Chairs are fully assembled units, stacked up to 3 high and bagged for transportation.
BA
GG
ED
AN
D R
EA
DY
TO
GO
Delivery Options
VISITOR SEATING ANVY
Regular Care
CleaningSPOT CLEANING
• Treat spills and stains as soon as possible
• Gently scrape any soil or mop any liquid from the surface of the fabric
• Do not scrub
• Apply proprietary cleaning agents strictly according to instructions to remove the residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
• May be spot cleaned with drycleaning fluid
CLEANING
Clean with hot water extraction machine (hot)
• Professional cleaning recommended
• Do not use dishwashing or laundry detergents
• Use only upholstery detergent
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
OR Clean using an on-site drycleaning machine (P)
• Professional cleaning only
• Do not wet filling with solvent
• Extract solvent thoroughly after application
• Wipe gently, do not rub
CAUTION – exhaust solvent vapour outside building.
• Provide adequate ventilation during cleaning and drying
• Allow to dry thoroughly before re-use
• Avoid use of room during drying period
OR May be shampoo cleaned using upholstery shampoo
• Do not use dishwashing or laundry detergents
• Do not wet filling
• Wipe gently, do not rub
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
No maintenance required.However it can be wiped over with a damp cloth.
Protect from direct sunlight.Vacuum regularly using low suction.
FRAME UPHOLSTERY - FABRICS
Instructions for useSled and 4 Leg
• Please ensure chair base/feet are in contact with floor surface at all times
• Do not sit on back of chair
• Do not sit on arms of chair
• Do not lean back onto back legs of chair