Shri Guru GobindSinghji

Institute of Engineering & Technology

Vishnupuri, Nanded (Maharashtra State) PIN 431606 INDIA

Tantra-Vaani A Collection of Reports of FDP’s conducted under TEQIP-II at SGGS IE&T Volume-I No. 8 e-version available on : www.sggs.ac.in/TEQIP-II/fdpreports Apr-June, 2016 Inspiration Hon. Baba Kalyani, Bharat Forge Ltd. Pune. Mentors Dr. SubhashBabu, IIT Bombay. Chief Patron Dr. Laxman M. Waghmare Editor: Dr. Anil B. Gonde Co-editors: Dr. Abhijeet V. Nandedkar Dr. Arun R. Patil

Application’s of PLC and SCADA

Dr. Asutkar, Dr. Holambe, Mr. Venkata Sarath, Mr. Sayed, Dr. Chile inaugurated the workshop

Director's Message

The overall development of the

students is dependent on the teachers

‘skills pertaining to teaching,

evaluation, research, tutorship,

mentorship and guidance in line with

advancing technologies over current

real world challenges. The Faculty

Development programs under

TEQIP-II at SGGSIE&T, Nanded,

have been designed with the specific

goals of enhancing the technical and

soft skills of its participating

members. A few programmes are

intentionally designed to imbibe the

research instinct among the faculty

members of the institute and from

outside colleges. I congratulate all

the coordinators for successful

conduction of all the programs and

wish the same fruitful cooperation in

the near future.

A five Days Workshop on

"Application’s of PLC and SCADA"

A five days workshop on “Application’s of PLC and SCADA” was held

during 26th

- 30th

April 2016, organized by Department of Instrumentation Engineering at

Shri Guru Gobind Singhji Institute of Engineering & Technology, Vishnupuri, Nanded,

an autonomous institute affiliated to the Government of Maharashtra state. It was

sponsored by TEQIP-II of Government of India.

The workshop focused on practical aspect of role of PLC and SCADA in Core

Industries. The workshop was entirely planned and coordinated by Dr. R. H. Chile, Dr. S.

T. Hamde and Mr. J. G. Parkhe. Experts for the workshop were Mr. Venkata Sarath and

Mr. Sayed MD Asadur Rahman, Innovians Technology, Noida, U. P. The inaugural

function of the workshop was held at 09.30 AM on April 26, 2016. The inauguration

accomplished in the presence of the invited experts Mr. Venkata Sarath and Mr. Sayed

MD Asadur Rahman, Dr. V. G. Asutkar, Head, Department of Instrumentation

Engineering, Dr. R. H. Chile, Dr. S. T. Hamde Professor, Department of Instrumentation

Engineering. The inauguration was anchored by Ms. Kalyani Aundhekar, Student from

Department of Instrumentation Engineering.

Mr. Venkat Sarath addressing during inaugural function

Mr. Sayed Rahman addressing during inaugural function

“Failure will never overtake me if my determination to succeed is strong enough."- Dr. APJ Abdul Kalam Page-1

Participants received certificates from Dr. R.S. Holambe Particpants received certificates from Dr. V. G. Asutkar

The Day 1 included the session on introduction to PLC, types of PLCs and programming PLCs. During this session SCADA

development tools and PLC programming tools are summarized. Installation of Micrologics 1200c a PLC programming tool was

covered during this session.

The day 2 is covered with continuation of SCADA development for basic applications. Theoretical session with hands on training

regarding SCADA developing tool was discussed throughout the day.

The day 3 and day 4 included PLC programming for various applications. The industrial applications are covered during this session.

The Day 5 focused on more practice on PLC programming, SCADA development and Human Machine Interface. The fifth day was

concluded by valedictory function with felicitation of experts, followed by HOD and faculty member’s address and certificate

distribution. The students gave feedbacks about the workshop and the function ended with vote of thanks. Around 44 students from

T.Y. B.Tech Instrumentation actively participated in the workshop.

TEQIP-II Sponsored Faculty Development Program

“Product Lifecycle Management”

Department of Mechanical Engineering organised a Faculty

development program during 25th

to 30th

May2016, on concepts

of “Product Lifecycle Management”. The program was

coordinated by Dr. JVL Venkatesh (Head, Department of

Mechanical Engineering) and Mr. Rajmore K.G. and Kondekar

G. R. worked as organising faculty members. Industry experts

Mr. Kiranjeet singh Sandhu, Siemens GDC, Pune (25th

to 27th

May 2016) and Mr. Suhas Chaudhary, Parametric Technologies

Ltd. Pune (28th

to 30th

May 2016) played a role of speaker cum

Trainer (Resource Person) for this program. These industry

experts have taught the basics of product lifecycle management

(PLM) to participants aided with hands on practice with PLM

tools.

Mr. K. G. Rajmore introduced the speaker

Mr. Kiranjeet Singh Sandhu addressing the students

The program was aimed to spread the knowledge of Product

Lifecycle Management to faculty in nearby institutes.Initially it

was planned for 20 participants but later nearly 27 participants

were registered from different institutes by paying nominal

registration fees of Rs. 1000 each. Research scholars hadonly Rs.

500 fees, however registration fees wasacquiredaiming to

compensate charges of registration and lunch only. Departmental

facilities like computers and PLM software (Teamcenter8,

Windchill 10.2, Nx.4 and Creo 3.0) were provided free of cost.

The program was held for six days from 25th to 30th May 2016,

covering different topics as given below.

“Don’t take rest after your first victory because if you fail in second, more lips are waiting to say that your first victory

was just luck.” - APJ Abdul Kalam Page-2

Mr. Kiranjeet Singh Sandhu addressing the students

Mr. Kiranjeet Singh Sandhu addressing the students

The program was held for six days from 25th to 30th May 2016, covering different topics as given below.

Day 1 – 25th

May 16

Introduction to PLM:

1. Introduction to PLM and its Tools

2. Creating items / revising item

3. Working with dataset

4. Managing Navigation pane and views

5. Home folder and new stuff folder

6. Creating relations.

7. Check in and check out

Day 2 – 26th

May 16

Managing Organization:

1. Creating person, user, groups, role

2. Creating organization

3. Adding and removing user from organization

4. Activating and deactivating users

Day 3 – 27th

May 16

Managing Assembly Structure (configuration):

1. Creating assembly

2. Editing assembly / BOM properties

3. Comparing assembly/ printing assembly Duplicating

4. Creating variant and conditions

5. Introduction to revision rule and effectivity etc.

6. Precise and imprecise difference.

Day 4 – 28th

May 16

Overview of Windchill:

1. PLM/PDM Overview

2. Objects, Products and Libraries

3. Windchill Data Model

4. Teams

5. Windchill Workgroup Manager Integration for

AutoCAD

Day 5 – 29th

May 16

Document and process Management:

1. Desktop Integration for Windchill

2. Document Management

3. Report Manager

4. Lifecycle

5. Versioning Schemes

Day 6 – 30th

May 16

CAD Integration and Visualization:

1. CAD Integration Architecture

2. EPM Documents and WT Part

3. CAD Naming and Numbering

4. Workspace Management

5. Family Table Management

6. Visualization – Object Adapter

7. ENOVIA – Overview

Dr. JVL distributed the certificates to participants

Group photograph of all the participants and experts

“All Birds find shelter during a rain. But Eagle avoids rain by flying above the Clouds.” - A.P.J Abdul Kalam Page-3

Mr. Sanjay Waigaonkar addressing the students

A Guest Lecture on

Opportunities for higher studies 25

th April, 2016

Dept. of Mechanical Engineering of SGGS IE&T

conducted a Guest lecture for the M. Tech PLM and M.

Tech. CAD/CAM students on “Opportunities for higher

studies in renowned institutes in India’. Institutes like

IITS and NITS and their admission process for getting

admission to Ph. D. are elaborated by Mr. Sanjay

Waigaonkar. He has included important information for

getting admissions in BITS, Pilani and Goa also. He has

given overview of research work going on at BITS and

under his guidance also. All the participants interacted and

discussed their doubts with the guest speaker. The

participants expressed their satisfaction about the guest

lecture and gave positive feedback about the speaker and

the session arrangement as well. TEQIP II Sponsored Expert Lecture on

Challenges in wireless communication Nowdays, Wireless communication is emerging area. Intensive

research is going on in this area. We have invited Dr. Abhay S. Gandhi

– Associate Dean, VNIT, Nagpur and Dr. Prabhat Kumar, Assistant

Professor, Department of Electronics and Communication

Engineering, VNIT, Nagpur for expert talk on this topic. Dr. Abhay

Gandhi spoke about Challenges in Radio Frequency Design and its

related issues with continuation with this Dr. Prabhat Kumar spoke

about Achieving High Data Rates Using Full Duplex Cooperative

Relaying. This expert lectures enhanced understanding of current

challenges in Wireless communications of Research scholars. All the

participants interacted with the experts and cleared their doubts. Dr. U.

V. Kulkarni & Mrs. M. S. Mahindrakar worked as Course

Coordinators to conduct this session successfully. Dr. Abhay S. Gandhi addressing the students

IBM Mainframe Course

The Dept. of CSE conducted a IBM Mainframe Course Program on 27th

April, 2016. The course was for the students those who have

completed the IBM Mainframe Technology Program. The course was to make students aware about the future job opportunities in

IBM. More than 100 students were present for the program. At the end of the program there was the Certificate Distribution

Ceremony for all the students those who have completed the IBM Mainframe Technology Course.

Mr. Amol Mahamuni addressing the students

Mr. Amol Mahamuni & Prof. P. S. Nalawade distributing certificates

"All of us do not have equal talent. But , all of us have an equal opportunity to develop our talents.” - A.P.J Abdul Kalam Page-4

A One Week STTP on

“Matlab in Research and Data Analytics”

2nd

-7th

May, 2016

Looking at the need of M.Tech Students and Research Scholars Department of Information Technology has organized One Week

STTP On Matlab in Research and Data Analytics from May 2- May 7, 2016 sponsored by Center of Excellence in Signal and Image

Processing. We received huge response to the course from all over Maharashtra. The total number of participants registered are 122.

Total inflow (IRG) generated Rs. 1,59,000/-

Dr. L. M. Waghmare, Director, SGGS IE&T Nanded inaugurated the program along with the chief guest Dr. U. S. N. Raju, Associate

Professor, NIT Warangal, and Dr. Rajan Chile, Dr. JVL Megha, Prof. M V Vaidya and Prof. Pakle.

Dr. L. M. Waghmare, Dr. Raju, Dr, Chile, Dr. Megha in inauguration Prof. Pakle welcomed the dignitaries

Dr. U. S. N. Raju was chief guest and key note speaker for the Inauguration Program. He addressed the audience and explained the

very essence of this course in the domain of engineering research.

The audience for inaufural function Dr. Raju addressing the audience in an inaufural function

There was a tremendous response from the participants to this program. Total 82 participants from the host institute and 40

participants from other institutes registered for this course.

The STTP Banner

The audience for inaufural function

“If you want to shine like a sun. First burn like a sun.” - A.P.J. Abdul Kalam Page-5

A One Week STTP on “Matlab in Research and Data Analytics”

Matlab basics were covered in first two days by Dr. B. M. Patre, Professor and Head, Department of Electrical Engineering,

SGGSIET, Nanded. The contents delivered are:

Working with the MATLAB user interface, Analyzing vectors and matrices, Visualizing vector and matrix data, Working with data

files, Complex Numbers, Matrices, Arrays, Functions, Plots, 2D-3D Plots; Automating commands with scripts; Writing programs

with logic and flow control etc.

Theory session by Dr. B.M. Patre

Theory session by Dr. B.M. Patre

Laboratory session by Mr. Pandurang Londhe

Laboratory session by Mr. Sushant Pawar

On third day, Mr. J. Premkumar from Capricot technology, Hyderabad delivered hands-on sessions on Computer vision toolbox. Mr.

Sanjeev Kubakkaddi, well-known Entrepreneur from ITIE Academy, Bangalore conducted hands-on sessions on Image processing

toolbox and related research areas using MATLAB. Dr. Suhas Gajre felicitated him.

Mr. Premkumar covered Computer vision toolbox

Dr. Suhas Gajre felicitated Mr. Sanjeev Kubakkaddi

“Man needs difficulties in life because they are necessary to enjoy the success.” - A.P.J Abdul Kalam

Page-6

A One Week STTP on “Matlab in Research and Data Analytics”

Fourth day, we had session on Neural Networks toolbox by Dr. U. V. Kulkarni, Professor, Department of Computer science and

Engineering, SGGSIET, Nanded. Participants had immersive experience in Neural networks with his session.

Theory session by Dr. U. V. Kulkarni

Laboratory session by Dr. U. V. Kulkarni

Last day was concluded with Report writing with LATEX by Mr. Pandurang Londhe and Mr. G. K. Pakle. We also conducted Course

examination on Fifth day and awarded pen drives as prizes to winners.

Latex session by Mr. Pandurang Londhe and Prof. Pakle

Test conducted on the last day

Latex session by Mr. Pandurang Londhe and Prof. Pakle

Test conducted on the last day

“Science should be applied for the greater good of mankind rather than in commercial sense.” APJ Abdul Kalam Page-7

A one week STTP on

Big Data Analytics 20-25 June, 2016

Department of computer science and engineering has conducted a one week short term training Programme on “Big Data

Analytics” under TEQIP-II. This training program was conducted on 20-25 June, 2016 during 10:00 AM to 6:00 PM. The speaker of

this training was Dr. U. S. N. Raju Asst. Professor, Dept. of CS&E, and N.I.T. Warangal.

Training has been inaugurated in presence of Dr. L. M. Waghmare, Director of SGGSIE&T and Prof. P. S. Nalawade, HOD,

CSE Dept. SGGSIET, Nanded on June 20, 2016 at 09:30 AM in A4 Hall. Total 82 including student and faculty members

participated in this training. SGGSIE&T Student as well Faculty had charged Rs.1000 and other than Student as well as Faculty had

charged Rs. 1500 as course registration fees.

Schedule for training was as follows:

Day Session Time Topics covered

Day1

Session1 10:00-12:00

Data is coming from many sources, Big image/Video data Processing

Data Generation, What is Big Data?, Characteristics ( 4 Vs )

Why Big Image Data Processing, How Big Image Data Processing?

Distributed Processing

Session2 12:00- 1:30

What is Hadoop?, Different Versions of Hadoop

Benefits of Hadoop , Components Of Hadoop, HDFS Architecture

Map-Reduce Architecture, Hadoop Ecosystem

Challenges of using Hadoop, Image/Video processing on Hadoop

Framework

1.30-2.15 Lunch

Session3 2:30 – 4:30

Hadoop Installation and Map-Reduce Programming, Hadoop Core

Component

Environment Setup for Hadoop, Local Standalone mode

Session4 5:00-6:00 Hadoop Ecosystem; Hadoop Lab session

Day2

Session1 10:00-12:00

Mathematical foundations of big data analytics, Map Reduce Programs

Review of Probability Theory-Random variables.

Statistical Analysis- mean, mode, median

Session2 12:00- 1:00 Mathematical foundations of big data analytics

Diagonalization of Eigen values and Eigen vectors

Session3 2:30 – 4:30 Apache spark introduction.

Session4 5:00-6:00 Practical session

Day 3

Session1 10:00-12:00 Mathematical foundations of big data analytics

Regression, Classification, Support Vector Machine.

Session2 12:00- 1:00 Mathematical foundations of big data analytics

PCA, Artificial Neural Network.

Session3 2:30 – 4:30 Big data processing with Spark

Session4 5:00-6:00 Practical session-

Hive Installation & Implementation of web application.

Day 4

Session1 10:00-12:00 Hands on installation of Python, Applications using Python

Installation of Spark.; Memory management in Spark

Session2 12:00- 1:00 Spark programming essentials

Image Enhancement-Spatial & Frequency Domain

Session3 2:30 – 4:30 Spark Components

Session4 5:00-6:00 Graph X(with examples), R & R-Studio Installation

Day 5

Session1 10:00-12:00 R-Studio Introduction ; Execution of R-commands.

Spark machine learning with MLlib(Introduction)

Session2 12:00- 1:00 Spark Streaming(Introduction)

Session3 2:30 – 4:30 Spark-SQL(with examples)

Session4 5:00-6:00 Practical session.

Day 6

Session1 10:00-12:00 R-Programming, R-commands

KNN Algorithm., Data Science Introduction

Session2 12:00- 1:00 Outline of Data Science experiment: Experiment design from problem

formulation to product development

Session3 2:30 – 4:30 Data Scientist Toolbox: R, Python, Spark, Hadoop, H2O, etc.

Research topics, how to get started with Data Science?

Session4 5:00-6:00 Valedictory

"Try not to become a man of success, but rather try to become a man of value" -- Albert Einstein Page 8

A two days workshop on

Big Data and Text Analytics Workshop 11 & 12 April 2015

Department of Computer Science and Engineering has conducted a two days workshop on “Big Data and Text Analytics”

under TEQIP-II program. This workshop was conducted on 11 & 12 April 2015 during 9:30 AM to 6:00 PMand the speaker of this

workshop was Mr. Prathamesh Kalamkar, Data scientist, Cap Gemini and Ms. Shrida Girme from Big Data Developer, Pune.

Workshop was inaugurated by Dr. L. M. Waghmare, Director of SGGSIE&T Nanded on April 11, 2015 at 09:30 AM in

CCF and in presence of Prof. S. S. Hatkar, In-charge HOD, Dept of CSE. Total 101 participants including student and faculty

registered and attended this workshop. Registration fees for the course was Rs.50/- only for faculty & student of SGGSIE&T and for

other participant’s registration fees was Rs.500/- only.

Schedule for workshop was as follows:

Day Session Time Topics covered

Day1

Session1 10:00-1:00

1)Introduction to Big Data and Hadoop

2)Understanding Hadoop architecture

3)Eco-system (Knowledge Session)

Session2 2:00- 4:00

1)Working with Hadoop Distributed File System (HDFS)

2) Setting up a single node Hadoop environment

(Practical Session)

Session3 04.15-06.15 1) Setting multi node Hadoop cluster (Practical Session)

Day2

Session1 10:00-1:00

1)Understanding Map Reduce programming model

2)writing a simple application on some dataset

(Knowledge base + practical session)

Session2 2:00- 4:00

1)Understanding PIG Latin query language and

performing installation

2)writing sample queries using PIG Latin (Knowledge

base + practical session)

Session3 4:15 – 5:15 Text Mining using R

Session4 5:15-6:00 Text Analytics using R

Mr. Prathamesh Kalamkar, Data scientist, Cap Gemini

Doubtful about 2015 or 2016 Activity?

Ms. Shrida Girme from Big Data Developer, Pune

Page-9