Upload
dangkien
View
213
Download
0
Embed Size (px)
Citation preview
Page 62
Irwin IndustrialVendor Code: VIS
Vise-Grip
006R 6" C-Clamp w/Regular Tips 0-2" 11/2"
09DR 9" C-Clamp w/Ext. Throat RT 0-41/2" 43/4"
011R 11" C-Clamp w/Regular Tips 0-4" 25/8"
18DR 18" C-Clamp w/Ext. Throat RT 0-8" 91/2"
018R 18" C-Clamp w/Regular Tips 0-8" 91/2"
024R 24" C-Clamp w/Regular Tips 0-121/2" 151/2"
04SP 4" C-Clamp w/Swivel Pads 0-15/8" 11/4"
06SP 6" C-Clamp w/Swivel Pads 0-21/8" 11/2"
09SP 9" C-Clamp w/Swivel Pads 0-41/2" 43/4"
11SP 11" C-Clamp w/Swivel Pads 0-37/8" 25/8"
18SP 18" C-Clamp w/Swivel Pads 0-8" 91/2"
24SP 24" C-Clamp w/Swivel Pads 0-10" 151/2"
11HD 11" Hold Down Clamp 0-33/4" 21/2"
Part No.Jaw
Adjustment Jaw DepthDescription
Locking C-ClampsAdjustment for quick pre-adjusting and repeat clamping.Locks to work with hand squeeze. Easy-release trigger.
Part No. 11SP
4WR-3 4" Curved Jaws Yes 0-15/16" 7/32"
5WR-3 5" Curved Jaws Yes 0-11/4" 1/4"
7WR-3 7" Curved Jaws Yes 0-15/8" 5/16"
10WR-3 10" Curved Jaws Yes 0-17/8" 7/16"
7R-3 7" Straight Jaws No 0-11/8" 1/2"
10R-3 10" Straight Jaws No 0-15/8" 5/8"
7CR-3 7" Curved Jaws No 0-15/8" 5/16"
10CR-3 10" Curved Jaws No 0-17/8" 7/16"
4LN-3 4" Long Nose Yes 0-15/8" 0-11/16" 1/8" 1/4"
6LN-3 6" Long Nose Yes 0-21/4" 0-15/16" 5/32" 5/16"
9LN-3 9" Long Nose Yes 0-27/8" 0-15/16" 3/16" 13/32"
Part No.Jaw Adjustment
Tip Base
Jaw Thickness
Tip BaseDescription
WireCutter
Part No. 9LN-3
Long Nose Locking Pliers with Wire CutterLong nose jaws reach into tight spots where other tools can’t. Built-in wirecutter. Adjusts easily for proper locking pressure. Available in 4", 6" and 9".
Curved Jaw Locking Pliers with Wire CutterThe wire cutter will handle anything up to 1/4" bolt. One bite cuts smallerwires; progressive bites cut through the big ones. Heat treated formaximum toughness and durability. Available in 4", 5", 7", and 10".
Part No. 10WR-3
Straight Jaw Locking PliersModern version of the original VISE-GRIP locking pliers/wrench.Built rugged. VISE-GRIP tools lock instantly, release quickly andadjust to pliers action. Available in 7" and 10".
Part No. 10R-3
Page 63
Irwin IndustrialVendor Code: VIS
06LC 6" Large Locking Plier 0-2"
12LC-3 12" Large Locking Plier 0-31/8"
020R 9" Locking Chain Clamp
20EXT 18" Extension Chain
20REP 18" Replacement Chain
310S 10" Locking Bar Clamp 0-10" 21/2"
008R 8" Sheet Metal Tool 0-31/8" 13/4"
09AC 9" Locking Panel Clamp 0-3/8"
009R 9" Locking Welding Clamp 0-23/4" 15/8"
00RR 7" Pinch Off Tool 0-1/4" 1"
Vise-Grip
SPECIALTY TOOLS
Locking Welding ClampHolds parts in proper alignment-even when the material isnot identical in thickness. Positive lock leaves hands free.
Part No. 009R
Part No.
Jaw Width or Jaw
Adjustment
ThroatDepthDescription
Locking Sheet Metal ToolLocks to work with powerful grip for smooth and accurate bendingand seaming. Adjusting screw and easy release trigger.
Part No. 008R
Locking Chain ClampHolds and locks around any size or shape that the chain can be wrappedaround. Adjusts to ratchet action in either direction.
Part No. 020R
Large Jaw Locking PliersThe unique jaw shape opens to 3-1/8", large enough to handlemost situations requiring a large wrench.
Part No. 12LC-3
Replacement Hardware
Locking WrenchesHeavy-duty jaw will twist faster before breaking. Jaws lockonto three sides which will not slip or mar. Adjustable to over16 wrench sizes and jaw tips knurled for gripping. Adjustingscrew for changing size and pressure. Guarded release triggerfor quick opening. High grade steel construction for maximumtoughness and durability.
Part No. 07LW
Part No. DescriptionWrench Size
Range
04LW 4" Locking Wrench w/Wire Cutter 1/4" - 9/16"
07LW 7" Locking Wrench w/Wire Cutter 7/16" - 3/4"
10LW 10" Locking Wrench w/Wire Cutter 5/8" - 11/8"
PipePart No. Capacity Description
274105 1" 8" Cast Iron Pipe Wrench
274101 1-1/2" 10" Cast Iron Pipe Wrench
274106 2" 12" Cast Iron Pipe Wrench
274102 2" 14" Cast Iron Pipe Wrench
274103 2-1/2" 18" Cast Iron Pipe Wrench
274104 3" 24" Cast Iron Pipe Wrench
274107 5" 36" Cast Iron Pipe Wrench
274108 6" 48" Cast Iron Pipe Wrench
Cast Iron Pipe WrenchesVISE-GRIP pipe wrenches are designed to last alifetime. The rugged cast iron housing performs inthe most extreme professional applications. Theforged upper jaw with hardened teeth provides anincredible bite and the easy spin action of theadjusting nut gets the work done quickly.
Part No. Springs Screws010R, 10WR, 10CR 0008 0007020R, 310S 0008 0007007R, 07WR, 07CR, 09LN 0022 0021008R, 009R, 00RR, 07LW 0022 0021011R, 11SP, 11HD, 12LC, 10LW 0008 000705WR, 06LN, 06BN 0052 0051006R, 06SP, 0052 005104WR, 04LN, 04SP, 04LW 0092 0091018R, 18SP 0034 0007024R. 24SP 0034 0007
NEW!
Page 64
Irwin IndustrialVendor Code: VIS
Laser LevelThe STRAIT-LINE® Laser Level projects a laser guideline up to 30 feetlong on any surface. Fast and easy one-person operation saves time onvirtually any project. The laser beam will not harm finished surfaces, andthe tool’s reinforced glass nylon case withstands use at building sitesand other tough work areas. The STRAIT-LINE® Laser Level features anergonomic design that fits the hand comfortably and is compact enoughto take anywhere you need to make a line without leaving a mark.
Lens CoverOn-Off Switch
Push Tab
Alignment Notch
ABS-Impact Resistant Casing
Dual Bubble Levels
Recessed Rubber Grip
Part No. 64001
Strait-Line / Marathon
Speed-Line Chalk Reel• Retrieves chalk line 3-1/2 times faster than a standard chalk reel.• Patented hook storage and door locking mechanism virtually eliminate spills and line tangles.• Crank handle clutch release allows release of the line without spinning the crank handle.• Lightweight ABS impact-resistant case increases durability.• Twisted cotton line holds more chalk for multiple line strikes.• Holds approximately 2 oz. of chalk.
Part No. Description
64310 100’ Chalk Box
64110 100’ Metal Case Chalk Reel
64901 8 oz Blue Chalk
64902 8 oz Red Chalk
64903 8 oz Yellow Chalk
64904 8 oz White Chalk
NEW!
NEW!
Marathon Portable Corded Circular Saw Blades• Thin kerf for fast cuts.• Construction carbide teeth for longer life.• Fully hardened plate runs truer longer.• Reinforced shoulder for added durability.• Specially engineered vents reduced heat build-up and warping.
Part No. Description
14030 7-1/4" x 24th Saw Blade
14031 7-1/4" x 40th Saw Blade
14070 10" x 40th Saw Blade
NEW!
Part No. 64110
Page 65
Irwin IndustrialVendor Code: VIS
Prosnip / Unibit / Speedbor
Step DrillsSelf Starting, Multiple Hole SizesExclusive single radial concave flute design allows the drillingof perfectly round holes in thin materials. Constructed of industrial gradehigh-speed molybdenum steel, heat treated to a hardness of between61 and 63 on the Rockwell C scale assures maximum strength and long life.Self starting tips won’t skid like standard twist drill bits. Bits laser marked.
Part No. UNIBIT 3
UNIBIT 1 13 1/8"-1/2" 1/4" 1/8"
UNIBIT 10 1 1/2" 1/4"
UNIBIT 11 1 7/8" 3/8"
UNIBIT 13 1 1-1/8" 1/2"
UNIBIT 2 6 3/16"-1/2" 1/4" 3/8"
UNIBIT 20 8 9/16"-1" 1/2" 1/8"
UNIBIT 3 9 1/4"-3/4" 3/8" 1/8"
UNIBIT 4 12 3/16"-7/8" 3/8" 1/8"
Part No.No. ofHoles
ShankSize
HoleSizes
MaterialThickness
Part No. 0502 - Three piece Unibit setContains one each Unibit 1, Unibit 2, Unibit 3.
Aviation SnipsHot drop forged chromium steel blades. Serrated blade for positive bite.Designed for rapid outside trim and clean cuts.
Part No. 21001
Offset SnipsKeeps hands safely above work on long inside cuts. Forged molybdenumsteel blades. Exclusive pinch-point wire cutter. Cuts up to 1.245mm/18gauge mild metal. Serrated blade for positive bite.
Part No. 20001
Part No. Cuts Size
21005 Aviation Snip Left & Straight 10"
21001 Aviation Snip Right & Straight 10"
21002 Aviation Snip Straight & Wide Curves 10"
21003 Utility Snip Straight & Curves 10"
20001 Offset Snip Left & Straight 91/2"
20002 Offset Snip Right & Straight 91/2"
Flat Bit Sets• Patented micro-groove cutting edge and spurs produce a smoother
hole finish.• Double spur design scribes the hole before the chips are made,
producing a cleaner hole and reducing vibration.• 1/4" hex shank fits all drills and 1/4" quick change adapters.
NEW!
Part No. Description
88899 6 piece set
88894 13 piece set
Part No. 88899
Page 66
Irwin IndustrialVendor Code: VIS
Standard Length Flat Bits• Patented micro-groove cutting edge and spurs produce a smoother hole finish.• Double spur design scribes the hole before the chips are made, producing a cleaner hole and reducing vibration.• All bits have a 1/4" hex shank that fits all drills and 1/4" quick change adapters.• All bits are 6" long.
Part No. Diameter
88804 1/4"
88805 5/16"
88806 3/8"
88807 7/16"
88808 1/2"
88809 9/16"
88810 5/8"
88811 11/16"
Part No. Diameter
88812 3/4"
88813 13/16"
88814 7/8"
88815 15/16"
88816 1"
88818 1-1/8"
88820 1-1/4"
88822 1-3/8"
88824 1-1/2"
NEW!
NEW!94212 1/4" Magnetic Nutsetter 1-7/8"
94232 5/16" Magnetic Nutsetter 1-7/8"
94252 3/8" Magnetic Nutsetter 1-7/8"
94272 7/16" Magnetic Nutsetter 1-7/8"
94316 1/4" Magnetic Nutsetter 2-9/16"
94336 5/16" Magnetic Nutsetter 2-9/16"
94356 3/8" Magnetic Nutsetter 2-9/16"
92005 #1 Phillips Insert Bit 1"
92011 #2 Phillips Insert Bit 1"
92019 #3 Phillips Insert Bit 1"
92075 #2 Phillips Insert Bit 1-1/4"
92105 3-4 3-4 Slotted Insert Bit 1"
92107 4-5 4-5 Slotted Insert Bit 1"
92111 6-8 6-8 Slotted Insert Bit 1"
92113 8-10 8-10 Slotted Insert Bit 1"
92203 #1 Square Recess Insert Bits 1"
92205 #2 Square Recess Insert Bits 1"
92207 #3 Square Recess Insert Bits 1"
92318 T10 TORX® Insert Bit 1"
92321 T15 TORX® Insert Bit 1"
92324 T20 TORX® Insert Bit 1"
93327 T25 TORX® Power Bit 1-15/16"
92330 T27 TORX® Insert Bit 1"
92333 T30 TORX® Insert Bit 1"
92336 T40 TORX® Insert Bit 1"
92377 T50 TORX® Insert Bit 1-1/4"
OverallPart No. Size Description Length
OverallPart No. Size Description Length
92381 T55 TORX® Insert Bit 1-1/4"
93003 #1 Phillips Power Bit 1-15/16"
93007 #2 Phillips Power Bit 1-15/16"
93011 #3 Phillips Power Bit 1-15/16"
93025 #2 Phillips Power Bit 3-1/2"
93029 #3 Phillips Power Bit 3-1/2"
93186 4-5 Slotted Power Bit with Finder 3-3/4"
93187 5-6 Slotted Power Bit with Finder 3-3/4"
93188 6-8 Slotted Power Bit with Finder 3-3/4"
93189 8-10 Slotted Power Bit with Finder 3-3/4"
93237 #1 Square Recess Power Bits (2-piece Design) 1-15/16"
93239 #2 Square Recess Power Bits (2-piece Design) 1-15/16"
93241 #3 Square Recess Power Bits (2-piece Design) 1-15/16"
93813 1/4" Bit 3/8" Square Drive Bit Holder 1-1/4"
93815 5/16" Bit 3/8" Square Drive Bit Holder 1-1/4"
93817 5/16" Bit 1/2" Square Drive Bit Holder 1-1/2"
93712 Magnetic Bit Holder 2-1/4"
93715 Magnetic Bit Holder 2-15/16"
93718 Magnetic Bit Holder 2-31/32"
Part No. 88807
Part No. 88804
Part No. 94212
Part No. 93007
Fastening Tools and Bits
Speedbor / Hanson
Page 67
Irwin IndustrialVendor Code: VIS
Handi-Clamp
Part No. WeightThroatDepth
• Jaws designed to reacharound odd shapes.
• Non-marring swivel pads.• Simple squeeze controls pressure.• High tech resin.• Quick release handle.• One handed operation.• 12 per counter display.
59200CD 2" .53 LB
506QC 1 lb, 8 oz 0-6" 3-1/4"
512QC 1 lb, 14.4 oz 0-12" 3-1/4"
518QC 2 lbs, 1.6 oz 0-18" 3-1/4"
524QC 2 lbs, 8 oz 0-24" 3-1/4"
536QC 3 lbs, 1.6 oz 0-36" 3-1/4"
Part No. WeightThroatDepth
JawAdjustment
Bar ClampsSoft but durable pads prevent marring of work. Quick release triggerand pistol grip action adjusts and tightens with just one hand.
Quick-ViseThe QUICK-VISE™ portable slide-action vise. Just mount a basewherever you do your work. Slide on the QUICK-VISE when you need it.Slide it off when you are done. With over a quarter ton of clampingpressure, you are not sacrificing strength for portability.
RQVNA Slide Action Vise
RQVNAB1 Standard Base
RQVNAB2 Workbench Base
Part No. Description • Quick-release locking mechanism.• Strong, yet lightweight, high tech resin construction.• Heat-treated steel bars.• Replaceable non-marring jaw pads.• Unique, locking base system for maximum portablility.• Clamping pressure of over 1/4 ton.
NEW!
60736 1/16-1/4 13 pc Drill Bit60737 1/16-1/2 15 pc Drill Bit60221 1/16-3/8 21 pc Drill Bit60738 1/16-1/2 29 pc Drill Bit60160 1/16-1/2 A-Z,1-60 115pc Set63137 1/16-1/2 Cobalt DB Set63138 1/16-1/2 Cobalt DB Set90108 8PC. 1/2 Reduced Set24606 41PC MS/Frac Tap & Die Set26317 41PC Metric Tap & Die Set54164 39PC T & D Super Set60748 29PC DB Sey w/Red Shd.
Part No. Size Description
Part No. 24606 Part No. 54164
Cutting Tools
Hanson / Quick-Grip
Part No. 506QC
Part No. RQVNA