Simplifying Machinery Diagnostics

VIBRATION TRAINING BROCHURE - 2020

- ISO Vibration Training Courses

- ISO Vibration Analyst Certifications

- Short Courses on Machinery Vibrations

- Turbo Machinery and Advanced Vibration Courses

Simplifying Machinery Diagnostics

INTRODUCTION TO MACHINERY VI-BRATIONS (IMV)

BASIC MACHEINRY VIBRATIONS

(BMV) MACHINERY VIBRATION ANALYSIS

(MVA) BALACNING OF ROTATING MACHIN-

ERY (BRM) ISO VIBRATION ANALYST CATEGO-

RY—I, II, AND III CERTIFICATIONS

TRAINING COURSES & CERTIFICATION

INTRODUCTION

E Vibration Consultancy is a leading and growing industrial consultancy and training company in India. We are providing vibration training courses and ISO vibration analyst certification for the industrial engi-neers and professionals who like to grow their career, knowledge and confidence level on machinery diagnostics. Our training courses designed such a way that every training participant gain maximum technical knowledge and expertise on machinery vibra-tion theory and its applications.

ISO VIBRATION COURSES AND CERTIFICATION

Vibration Institute - USA is a non-profit organization, global leader in Vi-

bration Analysis Training and Certification program. Their training and

certification programs are worldwide recognized one and well known.

We are one of the recognized international representatives for Vibration

Institute – USA and conduct ISO compliance vibration training and Vibra-

tion Analyst certification programs in India.

In agreement with Vibration Institute - USA, we offer below ISO training

courses and certifications program to benefit Industries and profession-

als.

- Introduction to Machinery Vibrations (IMV)

- Basic Machinery Vibrations (BMV)

- Machinery Vibration Analysis (MVA)

- Balancing of Rotating Machinery Vibrations (BRM)

- Vibration Analyst Category - I, II and III Certification

Our training program follows and compliance with the training require-

ments and process stated in ISO 18436 – Part 2 & 3, Condition Monitor-

ing and Diagnostics.

SHORT COURSES

Machinery Vibrations and Fault

Analysis

Machinery Vibrations and Control

Machinery Balancing

TURBO MACHINERY AND

ADNAVCED COURSES

Machinery Diagnostics Course

Advanced Machinery Diagnostics

Course

Advanced Machinery Vibrations,

Balancing and Control

SHORT, TURBO-MACHIENRY AND ADVANCED COURSES

The short courses, turbo-machinery and advanced courses specially de-

signed for industrial requirement to enhance practical monitoring, analy-

sis and diagnostics knowledge of professional engineers in the machinery

field.

For all the training courses, the instructor shall be a certified Vibration

Analyst – IV and we are the only company in India have certified Vibration

Analyst Category - IV to teach and train industrial professionals.

We periodically organize all vibration training courses and certification

examinations in major cities of India.

The training courses and certification exams shall conduct on require-

ment basis also at customer premises itself as a corporate training

course. For more information on training and certification visit our web-

site or contact us.

Simplifying Machinery Diagnostics

IMV COURSE DURATION

04 DAYS

IMV COURSE OUTCOMES

Understand vibration concept and measurements

Vibration data collection using vibra-

tion analyzer Perform simple testing and vibration

fault analysis

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engineers/technicians who want to develop career in rotating machinery vibra-tions.

INTRODUCTION TO MACHINERY VIBRATIONS (IMV)

COURSE OVERVIEW

This is a four days course designed for any engineers who shall prefer to

become machinery vibration diagnosticians and to develop career in ma-

chinery vibration analysis. This course will help fresh vibration analysts to

understand basic vibration, how to perform vibration analysis on machin-

eries and prepare for the Vibration Institute certification examination ISO

category - I.

COURSE DATE & LOCATION

COURSE MATERIALS Each participant will receive IMV course notes, workshop book, student PPT and exam study

topics Scientific calculator, ruler and stationeries Course completion certificate

LOCATION DATE DEADLINES

CHENNAI 21-24 Sep 2020 21 Aug 2020

COURSE & CERTIFICATION EXAM FEE

IMV Course Fee ₹43,900/- plus 18.0% GST Vibration Analyst Category – I (Optional) ₹33,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

COURSE PROGRAM DAY 1 Machinery Vibrations - Background, definitions, sources, effects, predic-tive maintenance, measurement concepts, equipment, physics, units, properties, measurement, amplitude, frequency, time, orbit domains, measures, conversions, analysis, excitation, natural frequencies, reso-nance and critical speeds Workshop DAY 2 Data Collection - Physical observations, transducers, frequency spans, measures, triggering, transducers mounting, transducer locations and instruments Machine Knowledge and Testing - Fault Sources, design and function of machines, periodic and permanent monitoring, acceptance testing Workshop DAY 3 Frequency Spectrum Analysis - Introduction, identification, matching and procedures Machine Faults and Analysis - Mass unbalance, misalignment, looseness, bearing defects and electrical defects Vibration Severity Criteria, procedures and vibration charts Workshop

IMV COURSE DURATION

04 DAYS

IMV COURSE OUTCOMES

Understand vibration concept and measurements

Vibration data collection using vibra-

tion analyzer Perform simple testing and vibration

fault analysis

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engineers/technicians who want to develop career in rotating machinery vibra-tions.

COURSE & CERTIFICATION EXAM FEE

IMV Course Fee ₹43,900/- plus 18.0% GST Vibration Analyst Category – I (Optional) ₹33,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

DAY 4 Course Review & Training Exam Vibration Analyst Category – I Exam (Optional)

COURSE INSTRUCTOR The course instructor is Mr. Dakshina M. Ramsekar turbo-machinery di-agnostician, certified Vibration Analyst Category – IV and member of Vi-bration Institute – USA. He has having more than 21 years of good practi-cal hands-on experience in rotating machinery vibration analysis, condi-tion monitoring, reliability engineering, troubleshooting, inspection, maintenance, and engineering projects in India and Middle East countries consultancy, power and petrochemical process industries. He is specialist in turbo machinery diagnostics, rotor dynamics, in-situ balancing of ro-tating machinery, modal and structural vibration analysis. He did many in-situ balancing of rotating machinery, worked on numerous machinery vibration problems, solved chronic equipment structural and design is-sues.

COURSE & CERTIFICATION EXAM FEE IMV Course Fee - ₹43,900/- plus 18.0% GST ISO Vibration Analyst Category – I fee (Optional) - ₹33,750/- plus

18.0% GST

IMV COURSE DURATION

04 DAYS

IMV COURSE OUTCOMES

Understand vibration concept and measurements

Vibration data collection using vibra-

tion analyzer Perform simple testing and vibration

fault analysis

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engineers/technicians who want to develop career in rotating machinery vibra-tions.

COURSE & CERTIFICATION EXAM FEE

IMV Course Fee ₹43,900/- plus 18.0% GST Vibration Analyst Category – I (Optional) ₹33,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

The fee is inclusive of tax, course materials, stationeries, snacks and lunch. The individual or self-sponsored participants who register 60 days in ad-vance shall get 10% discount on published fee. The company sponsoring participants who register 60 days in advance and more than two candidates from the same company shall get 10% dis-count on published fee.

REGISTRATION

Interested candidates download the registration form from our website, fill and mail us to info@evibraionconsultancy.com or fill online registra-tion form and submit.

IMV COURSE DURATION

04 DAYS

IMV COURSE OUTCOMES

Understand vibration concept and measurements

Vibration data collection using vibra-

tion analyzer Perform simple testing and vibration

fault analysis

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engineers/technicians who want to develop career in rotating machinery vibra-tions.

COURSE & CERTIFICATION EXAM FEE

IMV Course Fee ₹43,900/- plus 18.0% GST Vibration Analyst Category – I (Optional) ₹33,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

BMV COURSE DURATION

05 DAYS

BMV COURSE OUTCOMES

Understanding of vibration principles and techniques

Setup vibration monitoring program

and perform better analysis Perform basic resonance testing,

basic balancing of the rotating equip-ment

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engi-neers/technicians who want to en-hance vibration knowledge and to implement vibration monitoring in the plant

BASIC MACHINERY VIBRATIONS (BMV)

COURSE OVERVIEW

This is a five days course designed for engineers who are working in in-dustries have some machinery vibration monitoring and analysis experi-ence. This course shall help professionals to understand vibration princi-ples, how to perform vibration analysis on machineries, setup plant vibra-tion data collection, basic balancing and prepare for the Vibration Insti-tute certification examination ISO category II.

COURSE DATE & LOCATION

COURSE MATERIALS Each participant will receive BMV course notes, workshop book, student PPT and exam study

topics Scientific calculator, ruler and stationeries Course completion certificate

Simplifying Machinery Diagnostics

LOCATION DATE DEADLINES

CHENNAI 20-24 Apr 2020 20 Mar 2020

CHENNAI 14-18 Dec 2020 14 Nov 2020

COURSE & CERTIFICATION EXAM FEE

BMV Course Fee ₹51,500/- plus 18.0% GST Vibration Analyst Category - II (Optional) ₹37,500/- plus 18.0% GST

COURSE PROGRAM DAY 1 Machinery Vibrations – Physical nature of vibrations, period, frequency, amplitude, phase, measures, conversions, analysis, units, natural fre-quencies, forcing frequencies, resonance, critical speeds, and damping Workshop DAY 2 Data Acquisition – Selection of measures, transducers, triggering devices, transducer locations/mountings, frequency span and data display Data Processing – Oscilloscopes, FFT Analyzers, Data Sampling, Aliasing, Windowing, Dynamic Range, FFT Analyzer/Data Collector Setup Workshop DAY 3 Fault Diagnostics – Operating speed, rolling element bearings, gearboxes, electric Motors, pumps, fans and compressors Machine Condition Evaluation – Shaft vibration, bearing and casing Vi-bration Workshop

BMV COURSE DURATION

05 DAYS

BMV COURSE OUTCOMES

Understanding of vibration principles and techniques

Setup vibration monitoring program

and perform better analysis Perform basic resonance testing,

basic balancing of the rotating equip-ment

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engi-neers/technicians who want to en-hance vibration knowledge and to implement vibration monitoring in the plant

COURSE & CERTIFICATION EXAM FEE

BMV Course Fee ₹51,500/- plus 18.0% GST Vibration Analyst Category - II (Optional) ₹37,500/- plus 18.0% GST

Simplifying Machinery Diagnostics

DAY 4

Machine Testing – Test plans, testing equipment, site inspection, baseline test, resonance and critical speed testing, specifications, data repre-sentation and reports

Periodic Monitoring - Machinery categorization, measures and selection,

frequency of data collection, trending, alarms and reporting Basic Balancing – Mass unbalance and causes, types of unbalance, unbal-

ance force, balancing equipment, pre-balancing checks, measurement, balancing pitfalls, trial weight selections, vectors and balance weights, mass splitting and consolidations

Workshop DAY 5 Course Review & Training Exam Vibration Analyst Category – II Exam (Optional)

COURSE INSTRUCTOR The course instructor is Mr. Dakshina M. Ramsekar turbo-machinery di-agnostician, certified Vibration Analyst Category – IV and member of Vi-bration Institute – USA. He has having more than 21 years of good practi-cal hands-on experience in rotating machinery vibration analysis, condi-tion monitoring, reliability engineering, troubleshooting, inspection, maintenance, and engineering projects in India and Middle East countries consultancy, power and petrochemical process industries. He is specialist in turbo machinery diagnostics, rotor dynamics, in-situ balancing of ro-tating machinery, modal and structural vibration analysis. He did many in-situ balancing of rotating machinery, worked on numerous machinery vibration problems, solved chronic equipment structural and design is-sues.

BMV COURSE DURATION

05 DAYS

BMV COURSE OUTCOMES

Understanding of vibration principles and techniques

Setup vibration monitoring program

and perform better analysis Perform basic resonance testing,

basic balancing of the rotating equip-ment

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engi-neers/technicians who want to en-hance vibration knowledge and to implement vibration monitoring in the plant

COURSE & CERTIFICATION EXAM FEE

BMV Course Fee ₹51,500/- plus 18.0% GST Vibration Analyst Category - II (Optional) ₹37,500/- plus 18.0% GST

Simplifying Machinery Diagnostics

COURSE & CERTIFICATION EXAM FEE BMV Course Fee - ₹51,500/- plus 18.0% ISO Vibration Analyst Category – II Fee (Optional) - ₹37,500/- plus

18.0% GST The fee is inclusive of tax, course materials, stationeries, snacks and lunch. The individual or self-sponsored participants who register 60 days in ad-vance shall get 10% discount on published fee. The company sponsoring participants who register 60 days in advance and more than two candidates from the same company shall get 10% discount on published fee.

REGISTRATION Interested candidates download the registration form from our website, fill and mail us to info@evibraionconsultancy.com or fill online registra-tion form and submit.

Simplifying Machinery Diagnostics

BMV COURSE DURATION

05 DAYS

BMV COURSE OUTCOMES

Understanding of vibration principles and techniques

Setup vibration monitoring program

and perform better analysis Perform basic resonance testing,

basic balancing of the rotating equip-ment

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engi-neers/technicians who want to en-hance vibration knowledge and to implement vibration monitoring in the plant

COURSE & CERTIFICATION EXAM FEE

BMV Course Fee ₹51,500/- plus 18.0% GST Vibration Analyst Category - II (Optional) ₹37,500/- plus 18.0% GST

MVA COURSE DURATION

05 DAYS

MVA COURSE OUTCOMES

Better understanding of vibration principles and techniques

Understand signal processing and data acquisition

Enhanced skill on fault diagnostics and analysis

Setup and manage vibration moni-toring programs

Acceptance testing, resonance and critical speed identification

Perform in-site single plane balanc-ing and basic vibration control

WHO SHOULD ATTEND?

Managers, Superintendents & Chief Engineers, Vibration Analyst, Engi-neers

Supervisors, Technicians, other tech-nical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

MACHINERY VIBRATION ANALYSIS (MVA)

COURSE OVERVIEW

This is a five days course designed for engineers who are working in in-

dustries and have a basic machinery knowledge, vibration monitoring and

analysis experience. This course shall provide advanced skill and neces-

sary knowledge to set up condition monitoring programs, fault diagnos-

tics, trouble shooting, in-situ singe plane balancing and prepare for the

Vibration Institute certification examination ISO category III.

COURSE DATE & LOCATION

COURSE MATERIALS Each participant will receive MVA course notes, workshop book, student PPT and exam study

topics Scientific calculator, ruler and stationeries Course completion certificate

LOCATION DATE DEADLINES

CHENNAI 10-14 Aug 2020 10 Jul 2020

CHENNAI 02-06 Aug 2020 02 Oct 2020

COURSE & CERTIFICATION EXAM FEE

MVA Course Fee ₹55,500/- plus 18.0% GST Vibration Analyst Category - III (Optional) ₹41,250/- plus 18.0% GST

Simplifying Machinery Diagnostics

COURSE PROGRAM DAY 1 Theory of Machinery Vibrations – Physical nature of vibrations, vibratory motions, angular rate and phase, acceleration, velocity and displacement relationship, conversions, machinery vibration response and machine whirling and instabilities Data Acquisition and Data Processing – Vibration transducers and fre-quency response, measurement selections, transducer selections, mounting, locations and scaling Vibration Instruments Uses and Limitations – Vibration analyzer and da-ta collectors, oscilloscope, tracking filter, digital signal processing, aliasing windows, dynamic range, averaging, overall amplitude and waterfall Workshop DAY 2 Time and Frequency Analysis – Times domain and waveform shape anal-ysis, spectrum analysis, synchronous and non-synchronous, amplitude and frequency modulation, harmonics and orders, beats, sum and differ-ence frequency and demodulation techniques Orbit and Phase Analysis – Orbit display and constructions, orbit whirl and analysis rule, phase analysis, measurement and angular rate Resonance and Critical Speed Analysis – Basic concepts, natural frequen-cy, mode shape, operational deflection shape, resonance testing and pro-cedures, campbell/interference diagram, bode and polar plots Workshop

MVA COURSE DURATION

05 DAYS

MVA COURSE OUTCOMES

Better understanding of vibration principles and techniques

Understand signal processing and data acquisition

Enhanced skill on fault diagnostics and analysis

Setup and manage vibration moni-toring programs

Acceptance testing, resonance and critical speed identification

Perform in-site single plane balanc-ing and basic vibration control

WHO SHOULD ATTEND?

Managers, Superintendents & Chief Engineers, Vibration Analyst, Engi-neers

Supervisors, Technicians, other tech-nical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the

COURSE & CERTIFICATION EXAM FEE

MVA Course Fee ₹55,500/- plus 18.0% GST Vibration Analyst Category - III (Optional) ₹41,250/- plus 18.0% GST

Simplifying Machinery Diagnostics

DAY THREE

Condition Evaluation and Condition Monitoring – Casing and shaft vibra-tion evaluation, ISO standards, vibration guidelines for condition evalua-tion and band evaluation Fault Analysis – Rolling element and fluid film bearing analysis, pumps, fans, blower, compressors, gearbox, motor & generators analysis Workshop DAY FOUR Vibration Control – Force and vibration relationship, corrections tech-niques – force reduction, mass addition and tuning, vibration absorbers, isolation and damping Balancing – Causes of unbalance, types of unbalance, balancing equip-ment, pre-balancing check, balancing phase measurement, high spot and heavy spot relationship, trial weight selections, trial weight effects, bal-ancing pitfalls, single plane balancing - vector method – weight addition and removal, three point method, balance sensitivity and phase lag, weight splitting and consolidation, residual unbalance and acceptable vibrations, basic two-plane balancing Workshop DAY FIVE Course Review Training Exam Vibration Analyst Category – III Exam (Optional)

Simplifying Machinery Diagnostics

MVA COURSE DURATION

05 DAYS

MVA COURSE OUTCOMES

Better understanding of vibration principles and techniques

Understand signal processing and data acquisition

Enhanced skill on fault diagnostics and analysis

Setup and manage vibration moni-toring programs

Acceptance testing, resonance and critical speed identification

Perform in-site single plane balanc-ing and basic vibration control

WHO SHOULD ATTEND?

Managers, Superintendents & Chief Engineers, Vibration Analyst, Engi-neers

Supervisors, Technicians, other tech-nical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

COURSE & CERTIFICATION EXAM FEE

MVA Course Fee ₹55,500/- plus 18.0% GST Vibration Analyst Category - III (Optional) ₹41,250/- plus 18.0% GST

COURSE INSTRUCTOR The course instructor is Mr. Dakshina M. Ramsekar - turbo-machinery diagnostician, certified Vibration Analyst Category – IV and member of Vibration Institute – USA. He has having more than 21 years of good practical hands-on experience in rotating machinery vibration analysis, condition monitoring, reliability engineering, troubleshooting, inspection, maintenance, and engineering projects in India and Middle East countries consultancy, power and petrochemical process industries. He is specialist in turbo machinery diagnostics, rotor dynamics, in-situ balancing of ro-tating machinery, modal and structural vibration analysis. He did many in-situ balancing of rotating machinery, worked on numerous machinery vibration problems, solved chronic equipment structural and design is-sues.

COURSE & CERTIFICATION EXAM FEE MVA Course Fee - ₹55,500/- plus 18.0% GST Vibration Analyst Category – III Fee (Optional) - ₹41,250/- plus 18.0% GST

The fee is inclusive of tax, course materials, stationeries, snacks and lunch. The individual or self-sponsored participants who register 60 days in advance shall get 10% discount on published fee.

The company sponsoring participants who register 60 days in advance and more than two candidates from the same company shall get 10% dis-count on published fee.

REGISTRATION Interested candidates download the registration form from our website, fill and mail us to info@evibraionconsultancy.com or fill online registra-tion form and submit.

MVA COURSE DURATION

05 DAYS

MVA COURSE OUTCOMES

Better understanding of vibration principles and techniques

Understand signal processing and data acquisition

Enhanced skill on fault diagnostics and analysis

Setup and manage vibration moni-toring programs

Acceptance testing, resonance and critical speed identification

Perform in-site single plane balanc-ing and basic vibration control

WHO SHOULD ATTEND?

Managers, Superintendents & Chief Engineers, Vibration Analyst, Engi-neers

Supervisors, Technicians, other tech-nical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

COURSE & CERTIFICATION EXAM FEE

MVA Course Fee ₹55,500/- plus 18.0% GST Vibration Analyst Category - III (Optional) ₹41,250/- plus 18.0% GST

Simplifying Machinery Diagnostics

BRM COURSE DURATION

04 DAYS

BRM COURSE OUTCOMES

Better understand balancing princi-ples and techniques

Perform single and two plane field

balancing Understand balancing machine bal-

ancing principles, balancing machine calibrations and perform shop bal-ancing

WHO SHOULD ATTEND?

Managers, Superintendents & Chief Engineers , Vibration Analyst and Engineers

Supervisors, Technicians, other tech-

nical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

BALANCING OF ROTATING MACHINERY (BRM)

COURSE OVERVIEW

The Balancing of Rotating Machinery Course designed for professionals who are working in industries. The course covers single and two plane balancing technique procedures for rigid and flexible rotors. The course will prepare professionals to perform field and shop balancing on ro-tating machineries as well prepare for Vibration Institute certification

examination Balancing Category I. COURSE DATE & LOCATION

COURSE MATERIALS Each participant will receive BRM course notes, workshop book, student PPT and exam study

topics Scientific calculator, ruler and stationeries Course completion certificate

LOCATION DATE DEADLINES

CHENNAI 17-20 Aug 2020 17 Jul 2020 COURSE & CERTIFICATION EXAM FEE BRM Course Fee ₹51,500/- plus 18.0% GST Balancing Category - I Exam (Optional) ₹37,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

COURSE PROGRAM

DAY 1 Machine Balancing Basics – Purpose, mass unbalance force and causes, rotor classification, techniques, equipment, pre-balancing checks, critical speeds, trial weight selection/placement, and pitfalls Single Plane Balancing Techniques – Vector and four run method – weight addition and removal, balance sensitivity and phase lag, weight splitting and consolidation, residual unbalance and acceptable vibrations Workshop

DAY 2 Two Plane Balancing - Influence coefficient and static/couple methods, calculator and graphical methods, one-shot balancing-two plane Workshop

DAY 3

Turbine/Generator Balancing - Procedures, static/couple method, influ-ence coefficient method, plane/sensor selections, strategy for least runs Roll Balancing - Weight placement, critical speeds and bow effects Fan Balancing - Balancing techniques (single and two plane), overhung fans, balance sensitivity, critical speeds, and case histories

Simplifying Machinery Diagnostics

BRM COURSE DURATION

04 DAYS

BRM COURSE OUTCOMES

Better understand balancing princi-ples and techniques

Perform single and two plane field

balancing Understand balancing machine bal-

ancing principles, balancing machine calibrations and perform shop bal-ancing

WHO SHOULD ATTEND?

Managers Superintendents & Chief Engineers Vibration Analyst, Engineers Supervisors, Technicians, other tech-

nical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

COURSE & CERTIFICATION EXAM FEE BRM Course Fee ₹51,500/- plus 18.0% GST Balancing Category - I Exam (Optional) ₹37,750/- plus 18.0% GST

DAY 4 Course Review Training Exam Vibration Analyst Category – III Exam (Optional)

COURSE INSTRUCTOR The course instructor is Mr. Dakshina M. Ramsekar turbo-machinery di-agnostician, certified Vibration Analyst Category – IV and member of Vi-bration Institute – USA. He has having more than 21 years of good practi-cal hands-on experience in rotating machinery vibration analysis, condi-tion monitoring, reliability engineering, troubleshooting, inspection, maintenance, and engineering projects in India and Middle East countries consultancy, power and petrochemical process industries. He is specialist in turbo machinery diagnostics, rotor dynamics, in-situ balancing of ro-tating machinery, modal and structural vibration analysis. He did many in-situ balancing of rotating machinery, worked on numerous machinery vibration problems, solved chronic equipment structural and design is-sues.

COURSE & CERTIFICATION EXAM FEE BRM Course Fee - ₹51,500/- plus 18.0% GST Balancing Category – I (Optional) - ₹37,750/- plus 18.0% GST

BRM COURSE DURATION

04 DAYS

BRM COURSE OUTCOMES

Better understand balancing princi-ples and techniques

Perform single and two plane field

balancing Understand balancing machine bal-

ancing principles, balancing machine calibrations and perform shop bal-

WHO SHOULD ATTEND?

Managers

Superintendents & Chief Engineers

Vibration Analyst, Engineers

Supervisors, Technicians, other technical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

COURSE & CERTIFICATION EXAM FEE

BRM Course Fee ₹51,500/- plus 18.0% GST Balancing Category - I Exam (Optional) ₹37,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

The fee is inclusive of course materials, stationeries, snacks and lunch. The individual or self-sponsored participants who register 60 days in ad-vance shall get 10% discount on published fee. The company sponsoring participants who register 60 days in advance and more than two candidates from the same company shall get 10% dis-count on published fee.

REGISTRATION

Interested candidates download the registration form from our website, fill and mail us to info@evibraionconsultancy.com or fill online registra-tion form and submit.

BRM COURSE DURATION

04 DAYS

BRM COURSE OUTCOMES

Better understand balancing princi-ples and techniques

Perform single and two plane field

balancing Understand balancing machine bal-

ancing principles, balancing machine calibrations and perform shop bal-

WHO SHOULD ATTEND?

Managers

Superintendents & Chief Engineers

Vibration Analyst, Engineers

Supervisors, Technicians, other technical staffs and fresh engineers/technicians who want to enhance vibration knowledge, implement and supervise vibration monitoring in the plant.

COURSE & CERTIFICATION EXAM FEE

BRM Course Fee ₹51,500/- plus 18.0% GST Balancing Category - I Exam (Optional) ₹37,750/- plus 18.0% GST

Simplifying Machinery Diagnostics

ISO VIBRATION ANALYST CERTIFICATION EXAMINATION E Vibration Consultancy is a corporate member and international repre-sentative of Vibration Institute –USA, conducts Vibration Analyst Catego-ry - I, II & III certification examination periodically followed to the training courses. The examination paper shall be from Vibration Institute, USA in a sealed envelope and opened during the time of examination by candi-dates only. The completed exam paper will send back to vibration insti-tute for their evaluation and grading. The successful candidate shall re-ceive an ISO and ANSI accredited certificate from Vibration Institute – USA.

ELIGIBILITY

General According to Vibration Institute and ISO 18346 – 2: 2014, to appear ISO Category certification exam, the candidates shall have a combination of education, training and experience sufficient to ensure that they understand the principles and procedures consistent with Clause 4 and Annex A. Education Candidates seeking classification do not need to provide evidence of formal education to establish eligibility. All candidates shall be able to use a basic scientific calculator and be familiar with the operation of personal computers. The Category III and IV candidates shall require familiarity with current VA technology. Successful completion of two or more years of mechanical technology or mechanical engineering at an accredited college, university or technical school is highly recommend-ed for candidates seeking classification to categories III and IV.

VIBRATION ANALYST CERTIFICATION

ELIGIBILITY

VIBRATION ANALYST CATEGORY - I

Experience - 06 Months

Training - 30 hours ISO Vibration Analyst Category - I training

VIBRATION ANALYST CATEGORY - II

Experience - 18 Months

Training - 38 hours ISO Vibration Analyst Category - II training

VIBRATION ANALYST CATEGORY - III

Valid ISO Vibration Analyst Category—II Certificate

Experience - 03 Years

Training - 38 hours ISO Vibration Analyst Category - III training

DATE/LOCATION OF EXAMINATION

ISO Vibration Analyst Category - I, II & III

24 Apr 2020 - Chennai

10 Aug 2020 - Chennai

06 Sep 2020 - Chennai

06 Nov 2020 - Chennai

18 Dec 2020 - Chennai

Simplifying Machinery Diagnostics

Training To be eligible to apply for the certification examination, candidates

shall provide documentary evidence of successful completion of formal

training based on the requirements stated in the Annex - A of ISO – 18436

-2. Training should take the form of formal lectures, demonstrations, train-

er-specified practical exercises or controlled self-study. Training shall as-

sessed by the trainer for evidence of adequate knowledge acquisition.

Training time shall meet the minimum requirements given in the below

Table - 1 shall include the topics identified in Annex A.

Experience To be eligible to apply for the certification examination, candidates shall provide evidence of experience in the field of machinery vibration condi-tion monitoring and diagnostics. The minimum experience requirements are shown in the below Table.

Designation of a person as category I is not a prerequisite for certification as category II. However, certification of a person as category III requires previous certification at the lower category. At each higher classification category, the breadth and depth of experience is expected to be greater than at the previous lower category.

Simplifying Machinery Diagnostics

Minimum Training Durations - Hours

Category I Category II Category III Category IV

30 Category I + 38 Category II + 38 Category III + 64

Minimum Experience - Months

Category I Category II Category III Category IV

6 18 36 60

The figures shown represent the cumulative total months of experience to be held for each classification

VIBRATION ANALYST CERTIFICATION

ELIGIBILITY

VIBRATION ANALYST CATEGORY - I

Experience - 06 Months

Training - 30 hours ISO Vibration Analyst Category - I training

VIBRATION ANALYST CATEGORY - II

Experience - 18 Months

Training - 38 hours ISO Vibration Analyst Category - II training

VIBRATION ANALYST CATEGORY - III

Valid ISO Vibration Analyst Category—II Certificate

Experience - 03 Years

Training - 38 hours ISO Vibration Analyst Category - III training

DATE/LOCATION OF EXAMINATION

ISO Vibration Analyst Category - I, II & III

24 Apr 2020 - Chennai

10 Aug 2020 - Chennai

06 Sep 2020 - Chennai

06 Nov 2020 - Chennai

18 Dec 2020 - Chennai

Examination

For all categories, the candidate should answer a number of questions within a specified duration shown in below table. The questions, cover-ing the topics as per Annex A of ISO 18436 - 2, should have been selected from a database of questions existing at the time of the examination. These questions should be generated or approved by a technical commit-tee or an appropriate assessment body (Vibration Institute – USA).

Questions shall be of a practical nature, yet shall test the candidate re-garding the concepts and principles required to conduct machinery VA for condition monitoring of machines.

CERTIFICATION EXAM FEE Vibration Analyst Category - I : ₹33,750/- Plus 18% GST Vibration Analyst Category - II : ₹37,500/- Plus 18% GST Vibration Analyst Category - III : ₹41,250/- Plus 18% GST

REGISTRATION Interested candidates download the registration form from our website, fill and mail us to info@evibraionconsultancy.com or fill online registra-tion form and submit.

Exam Durations - Hours

Category Number of questions Examination Duration

I 60 2

II 100 3

III 100 4

IV 60 5

VIBRATION ANALYST CERTIFICATION

ELIGIBILITY

VIBRATION ANALYST CATEGORY - I

Experience - 06 Months

Training - 30 hours ISO Vibration Analyst Category - I training

VIBRATION ANALYST CATEGORY - II

Experience - 18 Months

Training - 38 hours ISO Vibration Analyst Category - II training

VIBRATION ANALYST CATEGORY - III

Valid ISO Vibration Analyst Category—II Certificate

Experience - 03 Years

Training - 38 hours ISO Vibration Analyst Category - III training

DATE/LOCATION OF EXAMINATION

ISO Vibration Analyst Category - I, II & III

24 Apr 2020 - Chennai

10 Aug 2020 - Chennai

06 Sep 2020 - Chennai

06 Nov 2020 - Chennai

18 Dec 2020 - Chennai

Simplifying Machinery Diagnostics

CORPORATE TRAINING COURSES E Vibration Consultancy Services conducts vibration training courses and certification examinations at your premises itself as corporate courses to meet your organization professional needs and interests. The following course and certification exams shall organized at your location on agreed convenient date.

ISO & VIBRATION INSTITUTE COURSES AND CERTIFICATIONS Introduction to Machinery Vibrations (IMV) – 4 Days Basic Machinery Vibrations (BMV) – 5 Days Machinery Vibration Analysis (MVA) – 5 Days Balancing of Rotating Machinery (BRM) – 4 Days ISO Vibration Certification Category - I, II & III OTHER VIBRATION TRAINING COURSES Short Courses Machinery Vibrations and Fault Analysis – 2 Days

Machinery Vibrations and Control – 2 Days

Machinery Balancing – 2 Days

CORPORATE COURSES

ISO & VIBRATION INSTITUTE COURSES AND CERTIFICATIONS

Introduction to Machinery Vibrations (IMV)

Basic Machinery Vibrations (BMV)

Machinery Vibration Analysis (MVA)

Balancing of Rotating Machinery (BRM)

ISO Vibration Certification Category - I, II & III

SHORT COURSES

Machinery Vibrations and Fault Analysis

Machinery Vibrations and Control

Machinery Balancing

TUBRO-MACHINERY AND ADVANCED VIBRATION COURSES Machinery Diagnostics Course

Advanced Machinery Diagnostics Course

Advanced Machinery Vibrations, Balanc-ing and Control

Simplifying Machinery Diagnostics

Turbo-Machinery and Advanced Vibration Courses Machinery Diagnostics Course – 5 Days Advanced Machinery Diagnostics Course – 5 Days Advanced Machinery Vibrations, Balancing and Control

– 5 Days If you would like have to additional information on any our vibration training courses and certification examinations send an email or contact us.

E VIBRATION CONSULTANCY SERVICES B-22, ASPEN BLOCK, CITILIGHTS MEADOWS NO.82, ANDAL AMMA STREET NOLAMBUR CHENNAI - 600095 PH: +91-44-26530177, +91-9080847434 WEB: www.evibrationconsultancy.com

Simplifying Machinery Diagnostics