PLUMBINGCONSTRUCTION OF BANK BUILDING ON PLOT CTS NO.770-771, T.P.S.VI, AT S.V.ROAD, ANDHERI (W), MUMBAI FOR BANK OF INDIABILL OF QUANTITIES & OFFER FOR PLUMBING WORKYOGI IMPEXSr.No.DESCRIPTIONQTYUNITRATEAMOUNT3PLUMBING WORKS1(A) External Sewerage & Storm water SystemSupplying and laying glazed stoneware pipes laid to required alignment and slopes with joints in CM 1:1 including nacessary excavation in earth or murum bailing & pumping out water from trenches with shoring wherever necessary,providing 1:3:6 150 mm thick concrete bedding and benching, refilling, the trenches, removing away the surplus earth or dumping it on site as directed. up to a depth of 2500 mm invert level.a230 mm dia S W pipe15RM1,50022,500b150 mm dia S W PipeDepth up to 2000 mm70RM98068,600c100 mm dia S W PipeDepth up to 300 mm14RM78010,9202Supplying and fixing 230 x 150 mm diameter stoneware gully traps with cement mortar 1:1 & 1:2:4 concrete around including constructing 300 x 300 mm clear size chamber in 230mm brick masonry 1:5 CM with 20mm thk. Smooth plaster and neat cement finish internally complete with 300 x 300 cast iron medium duty cover & frame of approved make.7No2,85019,9503Constructing rectangular inspection chamber 900 x 450mm clear size in brick masonary in CM1:5 with 150 mm thk. 1:2:4 PCC bedding, necessary benching in PCC 1:2:4 and 20mm thk.cement plaster 1:4 and neat cement finished smooth inside & rough cement plaster outside,CI steps as necessary with heavy duty air-tight, water tight full size CI cover and frame ( weight not less than 125 Kg.) with necessary excavation in earth or murum, refilling the earth back in layers, ramming and consolidating, removing away the surplus earth or dumping it on site as required (depth 1500 to invert)10No19,800198,0004Constructing conical inspection chamber 1350mm dia at bottom and 600 mm dia at top inside clear size in brick masonry CM1:5 as per ISS with 230 mm thk. 1:2:4 PCC bedding, necessary benching in PCC 1:2:4/ and 20mm thk.cement plaster 1:4 and neat cement finished smooth inside & rough cement plaster outside with air & water-tight heavy duty full size CI cover & frame (weight not less than 200 Kg) necessary excavation in all soils, refilling the earth back in layers, ramming and consolidating, removing away the surplus earth or dumping it on site as required.For depth up to 2.5 Mt. invert.1No48,00048,0005Providing and fixing 230 x 150mm size SW disconnecting (sewer) trap to be fixed in concrete in the last manhole.1No2,2002,2006Providing and fixing 100 mm dia SW bend tees, junctions etc.2No1603207Laying 1:2:4 PCC pipe supports, haunching or bedding as directed including concreting and curing.8Cu.Mt.4,80038,4008Constructing storm water channels in brick masonry CM1:5 as per ISS with 230 mm thk. 1:2:4 PCC bedding, necessary benching in PCC 1:2:4/ and 20mm thk.cement plaster 1:4 and neat cement finished smooth inside & rough cement plaster outside with heavy duty full size CI Grating & frame necessary excavation in all soils, refilling the earth back in layers, ramming and consolidating, removing away the surplus earth or dumping it on site as required.450 wide & avarage 450 mm deep90RMCivil Item0.09Providing and laying in position RC NP2 class pipes with collar joints CM 1:1 laid to required slope curing and testing the joints as directed - do - as item no.1.1a150 mm dia.20RM1,50030,000b300 mm dia.20RM3,20064,000c450 mm dia.15RM4,80072,00010Making Drop connection arrangement in inspection chambers / manholes with necessary plug connections , pipe ect complete as per standerd practice and requirement of local municipal authorities1Job8,0008,00011Making Sewer drain connection on municipal sewer drain as per instructions of BMC with necessary approvals & NOC from concerned local authorities complete with all incidencial expenses to avail of DCC.1Job200,000200,00012Making storm water connection on municipal storm drain as per instructions of BMC with necessary approvals & NOC from concerned local authorities complete with all incidencial expenses to avail of final approval.1Job180,000180,00013Constructing Ring wells. Considering excavation, upto Hard formation 1500 mm. Dia approx. 4 mt. deep, 1500 mm dia RCC rings approx. 12 nos., stone filling, filtration and packing material, casing pipe about 7 mt deep ,filtration and nylon net and cancealed chember with material and labour with RCC cover complete as directed.2NoCivil ItemSEPARATE CIVIL JOB14Excavation & Backfilling for Under ground SW Piping170Cum0.00.0External Sewerage & Storm water System (A) - Total962,890(B) Roof Drainage System1Supplying & fixing C.I. spun pipe of approved ISI quality with necessary fittings ( as per IS 3989-84) as required and with lead caulked joints complete with holder bats;MS clamps, dash fasteners fixed to walls,beams, or ceiling as required slope and necessary special heavy detachable MS bracket and clamps as directed including two coats of approved shade of paint over a coat of primer after testing hydraulically.a100 mm dia. Pipe22RM2,36051,920b150 mm dia. Pipe110RM4,350478,5002Supplying and fixing 230 mm lead bell mouth made out of lead sheet of 3mm thick weighting 30kg/sqm.with 150mm lead pipe complete with full size CI dome shaped rain water grating, sealing the bell mouth to the structure with approved epoxy resin etc. complete4No4,85019,4003Supplying and fixing 150 mm lead bell mouth made out of lead sheet of 3mm thick weighing 30kg/sqm.with 150mm lead pipe complete with full size CI dome shaped rain water grating, sealing the bell mouth to the structure with approved epoxy resin5No4,45022,250Roof Drainage System (B) - Total572,070( C) Soil Waste and Vent Pipe System1Providing and laying 100mm dia CI spun soil pipes of first quality as per IS 3989-84 with all specials as required, lead caulked joints and testing, laid in floor slab to the required slope or clamping to wall and ceiling with necessary Anchor fastners, cradles, laid on floor to slope including the painting of exposed pipes with 2 coats of approved paint over one coat primer as directed after testing.210RM2,420508,2002Providing and laying 80mm dia CI spun soil pipes with all specials as required, lead caulked joints and laid or fixed as above including painting complete with tests as specified - do - as above.330RM2,200726,0003aProviding and fixing 100mm dia CI vent cowl with lead joints5No7503,750bDo - 80 mm dia - do - as above11No5506,0504aProviding and fixing 32mm dia heavy duty oriplast PVC pipes in chases complete with wrapping and coating with FRP tape including necessary fittings, making holes in slab & redoing the same as instructed.20RM2505,000bDo - 40mm dia - do - as above15RM3004,500cDo - 50mm dia - do - as above10RM3503,5005aProviding and fixing 32 mm dia 'C' class GI pipe in chases including clamps and necessary fittings to match 'C' class pipe and making good the chases.25RM1,15028,750bdo - as above 40 mm dia -do - as above20RM1,35027,000cdo - as above 50 mm dia -do - as above15RM1,65024,7506Providing and fixing 100 x 80mm CI deep seal nahani traps upto 450 mm long arm CP heavy grating with or without vent connection as required.55No1,10060,5007Providing and fixing brass clean out plug with GI socket and lead caulked joint.a100 mm dia2No2,8005,600b80 mm dia13No2,70035,1008aProviding and fixing 100 x 100 C.I. "P" traps upto 450 mm long arm and C.P. heavy grating on top (as floor trap) with lead caulked joints,necessary supports etc complete.9No2,00018,000bProviding and fixing 100 x 80 C.I. "P" traps upto 450 mm long arm and C.P. heavy grating on top (as floor trap) with lead caulked joints,necessary supports etc complete.7No1,1007,7009Supplying and fixing C.I double-flanged sluice valve as per IS:780-PN-1.0 of approved make with necessary nuts, bolts,flanges, rubber gasket etc. complete as specified.a150 mm Nominal Bore4No.850034,000Soil Waste and Vent Pipe System - (C) Total1,498,400(D) Sanitary Fixtures1awall hung European type WC in pastel shade with CI brackets and chair & pan connector for vent pipe.bHindware - cat no. 92024 oe equivalent approvedc32mm dia CP brass flush valve of approved makejaquar 1093 Metropole or equivalent approveddDeluxe black solid backelite WC cover & seat with CP hinges and rubber buffers (ISI - A Grade) of matching shade.eFixing EWC to wall as directed.26Sets15,500403,0002Providing and fixing below counter type circular/oval wash basin approved make with central hole in pastel shadeaHind ware 10049 oval or equivalent approved makebCI concealed type brackets fixed to wallwith GI rag bolt.c32 mm heavy quality CP brass wastefitting with rubber plug and CP ball chaind32 mm heavy quality CP brass bottle trap C P jaquar 767 oe equivalent approved make with cleaning eye, extension piece & wall flange.e15 mm CP brass pillar tap Jaquar solo 6011 pillar cock or equivalent approved make with wall flange etc. complete.fPainting exposed surfaces of brackets with two coats of white enamel paint over one coat of approved primer.g15 mm CP brass heavy grade flexible inlet connection with CP nuts (minimum length 450mm) made to measure.h15 mm CP brass heavy quality angle stop cock jaquar solo 6053 angular stop valve with wall flange or equivalent approved make .37Sets9,200340,4003Supplying and fixing Porcelain China ware urinals in pestal Shade comprising.aHind ware pastel shade cat no 60007 with in built senser , or equivalent approved makebCP brass flush pipes, spreaders and inlet caps as necessary made to measurec32 mm heavy quality CP brass bottle trap C P jaquar 767 oe equivalent approved make with cleaning eye, extension piece & wall flange.23Sets25,000575,0004Supplying and fixing heavy quality stainless steel towel rod 750mm long with approved type SS brackets concealed type screw of approved make (ESSESS or equivalent make)15No1,45021,7505Providing and fixing approved type SS coat hooks with concealed type screws. Jaquar 1161 or equivalent approved make26No60015,6006Providing and fixing CP brass liquid soap dispensers, of approved make with nozzle and piston arrangement.37No3,300122,1007Providing and fixing races type toilet paper holder in vitreous China to suit wall tile size in pastel shade. Jaquar 1551 or equivalent approved make26No1,62042,1208Providing and fixing health faucet for ablution at toilets in heavy quality of Jaquar 563 with pvc tube & 6053 angle cock or equivalent approved make26No1,50039,0009Providing and fixing standard size ISI certified electrical storage water heater of approved make complete with vaccum and pressure release device and vent valve made in copper vessel and adequately insulated of approved make.70 litre capacity1No24,50024,50010Providing and fixing SS sink with integrated single drain board similar to NIRALI or approved make of 1145 x 510 side basket strainer outlet. Angle stop cock long body, C P swinging sink cock, C.P. bottle trap, C.P. extension pipe,wall flange etc. complete.5No19,50097,50011Providing and fixing SS sink without drain board similar to NIRALI or approved make of 1145 x 510 side basket strainer outlet. Angle stop cock long body, C P swinging sink cock, C.P. bottle trap, C.P. extension pipe,wall flange etc. complete.4No19,50078,000Sanitary Fixtures. - (D) - Total1,758,970(E) Water Supply Distribution1Supplying and laying G.I C-Class pipes with necessary fittings and pipes wrapping with hessian cloth over a coat of bitumastic paint including nacessary excavation in earth or murum bailing & pumping out water from trenches with shoring wherever necessary,providing 1:3:6 150 mm thick concrete bedding & pedestals benching, refilling, the trenches, removing away the surplus earth or dumping it on site as directed complete including hydraulic testing at 10.54Kg pressure (depth upto 1.00M).a65 mm dia as above25RM1,20030,000b25 mm dia as above10RM5005,000c20 mm dia as above20RM3807,600d15 mm dia as above40RM28011,2002Providing and fixing heavy duty 'C' class GI pipes including necessary specials, anchor fastners,Brackets, clamps to wall or ceiling ,necessary concrete pedestals etc complete, and testing 10.54 kg/sqcm.hydraulic pressure including two coats of enamel paint over a coat of primera150 mm dia10RM250025,000b100 mm dia10RM175017,500c80 mm dia125RM1200150,000d65 mm dia125RM1050131,250e50 mm dia35RM74526,075f40 mm dia30RM55016,500g32 mm dia55RM47526,125h25 mm dia40RM37515,000i20 mm dia50RM27513,750j15 mm dia60RM22013,2003Providing and fixing 'C' class GI pipes including specials as necessary in chase in walls clamping wrapping with superrior make hessian cloth or FRP tape or equivalent treatment over 2 coats of bitumastic paint as per standard practice joint teflon taped for concealed work including testing of pipes to 10.54 kg/sqcm.before wrapping.a40 mm dia - do -25RM65016,250b32 mm dia - do -35RM57520,125c25 mm dia - do -45RM47521,375d20 mm dia - do -160RM36057,600e15 mm dia - do -300RM31093,0004Providing and fixing heavy quality GM peet valves (fullway valves) of approved make.a150 mm Nominal bore.2No20,00040,000b100 mm Nominal bore.2No13,50027,000c80 mm Nominal bore12No7,00084,000d65 mm Nominal bore8No6,50052,000e50 mm Nominal bore2No3,5007,000f40 mm Nominal bore4No2,1008,400g32 mm Nominal bore30No1,55046,500h25 mm Nominal bore12No1,10013,200i20 mm Nominal bore14No6509,100j15 mm Nominal bore12No5806,9605aProviding and fixing 100 mm NB basket strainer and foot valve for suction tank with brass moving parts.2No7,80015,600bProviding and fixing 150 mm NB,CI double flanged ISI heavy quality tested sluice valve of standard water works pattern tested to 160 mt.head with hand wheel on top CI body phosphor bronze gate and spindle all certified by BMC.4No9,50038,0006aProviding and fixing 100 mm NB,CI double flanged ISI heavy quality tested sluice valve of standard water works pattern tested to 160 mt.head with hand wheel on top CI body phosphor bronze gate and spindle all certified by BMC.2No8,50017,000bProviding and fixing 80 mm NB,CI double flanged ISI heavy quality tested sluice valve of standard water works pattern tested to 160 mt.head with hand wheel on top CI body phosphor bronze gate and spindle all certified by BMC.4No7,50030,0007Supplying and fixing 600 mm dia CI circular manhole cover and frame weighing 28 kgs, fixed to RCC cover slab with handles and locking arrangement as per municipal rules.12No4,80057,6008Providing and fixing 40 mm inlet size high pressure tested ball valve with copper float and brass moving parts, ISI certified make2No6,80013,6009Providing and fixing brass mosquito proof coupling as per municipal requirements for 100 mm overflow pipes.4No4001,60010Providing and fixing 50 mm NB GI vent pipe 600 to 750 mm high with double GI bends mosquito proof coupling (brass) at free end, fixing to concrete cover slab etc. complete.10No2,80028,00011Supplying and fixing air release valve of approved make.a15 mm dia6No4502,70012Supplying & Fixing Hot water insulation of "AEROFLEX" make E.D.P.M. rubber; 12mm tube sections with necessary cheasing in wall & Re doing the same as per standard practice.15 mm dia pipe10RM6006,00013Supplying & Installing Vertical centrifugal pumps having with S.S. Impeller, SS shaft, SS casing, each pump capable of delivering 250 LPM at 50 Mtrs.and driven by suitable H.P, 3 PH, 415V, 2900 RPM, TEFC / motor, complete as directed2Nos.65,000130,00014Supplying & fixing approved make 80mm. Dia cast iron double flanged vertical special design non-return valves having bronze seated stem guided flep with synthetic rubber disc type sealing washer and side bolted opening for easy removal of internal parts2Nos.29,50059,00015Supplying & fixing sheet steetclad control panel for 2 x 7.5 HP Pumps having suitably rated in coming isolating switch, incoming Voltmeter DOL starters with hand reser overload relay, OFF/AUTO/MANUAL selector switch, electronic level relay etc complete as directed1Set32,50032,500Water supply Distribution (E)Total of E1,422,310FMunicipal water connection to under-ground tanks at basement. - (F)1Providing and fixing 65 mm size municipal approved water meter with necessary flanges, CI pot strainer 65 mm flanged cut off valve, all fixtures to be of ISI certified quality municipal tested as per by - laws.1Sets45,00045,0002Constructing water meter chamber 900 x 450 mm clear inside dimension with 230 mm thk.brick wall in CM1:5, PCC bedding 230mm thick at bottom with 1:2:4 conc., with 1 no. 900 x 450 air and water tight extra heavy duty CI manhole cover and frame as directed, 20mm thk plaster, smooth finish inside and rough out side, brick pedestals 230 x 300mm height below meter and accessories including necessary, excavation in earth, murum & loose boulder, necessary shoring, back filling in trenches in layers, consolidating and ramming including disposing surplus earth as directed and providing locking tie bar arrangement to manhole covers.1No18,00018,0003Making water connection on municipal main as per instructions of BMC with necessary approvals & NOC from concerned local authorities including nacessary plug or valve connections within owner's property as directed and all incidental expenses to avail of water supply facility.1Job250,000250,0004Constructing 450 x 450 mm size valve chambers in brick work masonry with medium duty C.I. full size frame & cover etc - same as item No. A-4 above with depth of 600 mm etc. complete.4No14,00056,0005Providing and fixing in position GI pipe outside within loose socket coupling for jointing the flanged as directed, welded to MS puddle plate 5 mm thick and size as required, for tying to main reinforcement.a150 mm dia6No210012,600b100 mm dia8No180014,400c80 mm dia8No160012,800d50 mm dia2No1,5003,000Municipal Water connection to underGround tank at basement - ( F) - Total411,800Basement Drainage - ( G)1Supplying and fixing 100 mm dia GI 'C' class pipe of IS grade, laid to required slope in trenches or clamped to ceiling including clamped fittings as per specification including two coats of approved paint over a primer20RM185037,0002Supplying and fixing 80 mm dia GI 'C' class pipe of IS grade, laid to required slope in trenches or clamped to ceiling including clamped fittings as per specification including two coats of approved paint over a primer15RM1,35020,2503Supplying and installing approved make totally submercible sump pump for wet pits with suitable coupling, complete with mounting brackets with activating probes at high and low level etc.complete with submercible motors of 1450 RPM with vibration altern- ators vertical type and approved make all ISI certified.a10 Liters/ Sec discharge at about 10 Mt. headagainst all losses with around 3 Hp motor.2No.32,50065,0004Composite control panel (common for two pumps) of approved make DOL / stardelta starter with auxiliary contacts for indicator lamps, level switches, change over facility, selector switches for ON / OFF/AUTO operation, High & Low level probs (Rombus, Pen) and control circuit fuses as per electrical consultant's requirements for above sump pumps (all accessssories should be suitable for damp and humid area) including suitable cabling from panel to pump.1Sets25,00025,0005Providing and fixing 6 mm thick MS chequered plate covers in two parts with MS angle iron supports and bracings and lifting arrangements as required for sump pits etc.2Sq.Mt.4,5006,7506Providing and fixing 65 mm horizontal / vertical type GM non return valve tested to 21 kgf/sq.cm. With flanged type connection2Nos.4,8009,6007Providing and fixing 65 mm GM peet valves, medium quality tested to 20 kgf/cm2 for control purpose.2Nos.4,1008,2008Providing and fixing CI slotted grating with frame of approved make over basement channel.400 mm size30RM3,500105,000Basement Drainage - (G) - Total276,800Total A+B+C+D+E+F+G6,903,240.00Composite VAT 8%552259.2Composite Service Tax 4.94%341020.056Total System cost7,796,519.26Note: -1)G I Pipe 'C' Class Jindal make to be use.2)All official payment to B.M.C. such as Fees, Deposits, Charges, Road Opening charges will be paid ny Owner.For M/S. VIJAY ENGINEERSPROPRIETORVat Tin No.: 27471033176VCST Tin No:-27471033176CService Tax Regd No : AAOPM7518HSD001