CURRICULUM REVISION PROJECT

2012

TEACHER GUIDE FOR

(LINEAR INTEGRATED CIRCUITS - 17445)

FOURTH SEMESTERELECTRONICS ENGINEERING GROUP

DECEMBER 2013

MAHARASHTRA STATEBOARD OF TECHNICAL EDUCATION, Mumbai

(Autonomous) (ISO 9001:2008) (ISO/IEC 27001:2005)

1

CURRICULUM DEVELOPMENT CELL, MSBTE, MUMBAI.

TEACHER’S GUIDE AND SAMPLE QUESTION PAPER

Name of Subject (with code):Linear integrated circuits(17445)

Designation Team of Design

Education Technology Consultant Prof. Joshi C REducation Advisor Prof. Chaudhari E. M. Ic. Principal,

Government Polytechnic, Karad

Project Institution Government Polytechnic, Karad

Project Period DEC 2013 to JAN 2014

Prof. Salunkhe A. V.

Project Co-ordinator Government Polytechnic, Karadamitv.salunkhe@rediffmail.comMob: 96890908701. Prof. Barbole A. J.Government Polytechnic, Karadaasha.barbole@gmail.comMob: 88054593672. Prof. Jagtap J. B.

Subject ExpertsKarmaveerBhauraoPatilCollege of Engg. &Polytechnic,Panmalewadi, Varye, Satarajagtapsir@gmail.comMob:94238668143. Prof. Sawant R. K.Government Polytechnic, Kolhapurranjitsawant@yahoo.comMob: 9822878804

© 2012, Maharashtra State Board of Technical Education,49, Kherwadi, Aliyawar Jung Road, Bandra (East), Mumbai-400051. Maharashtra State, India.

No part of this Laboratory Manual be reproduced in any form or by any means, without permission in writing from MSBTE Mumbai.

FIRST PRINT, JUNE 2013

2

1. APPROACH TO CURRICULUM DESIGN1.1 Background:

MSBTE is introducing the revised curriculum under ‘G’ scheme from the academic year 2012-13.There are many institutions in the state running different diploma courses. In order to ensure uniform and effective implementation of the curriculum it is necessary that every teacher is aware of approach for curriculum design, educational principles to be adopted, learning resources to be used and evaluation methods. The teacher guide prepared for each subject will provide the inputs related to above mentioned aspects to achieve uniform and effective implementation of curriculum of various subjects.

1.2 CURRICULUM PHILOSOPHYMSBTE has adopted systems approach while designing the scientific based curriculum since 1995. The same approach has been adopted while revising the curriculum in semester pattern.Fig. No. 1 shows the systems diagram. This diagram provides the holistic view for curriculum designing, development, implementation and evaluationThe input to polytechnic education system is the students having 10+ qualifications. The teaching learning process occurs in the institution for six/eight semesters. The output of the system i. e. Diploma pass out is normally the input to industries. (Some students do go for higher education). While designing the curriculum the expectations of the industries play a major role. Due to globalization and competition the industries expect that pass outs have generic and technological skills along with right attitude.To fulfill the needs derived from systems approach following conceptual framework is considered.

1.3 Curriculum:“Curriculum is an educational program designed and implemented to achieve specified educational objectives”

This definition takes into account the fact that Education is purposeful There is an organized plan of action contemplated Such a plan is translated into action through appropriate strategies of

implementation.

3

REGULATING AGENCIES

M.H.R.D., A.I.C.T.E.

5) MGTMOE

DTE, DIIC, MSBTEPOLYTECHNICS

3 INPUT1. Students2. State level 4) PROCESS EDUCATIONAL PROCESSES

RO levelAdministrator

Principals State Institutional Curriculum LRDC Instructional Student’sHODs Planning Planning Design & Design LearningTeachers & Develop LRUC

Tech. SupportStaffMinisterial Staff

3. IdentifiedResource, ENABLINGPersons PROCESSES

4. IdentifiedFaculty

(Trainers)

I.IState.I.Project I.I.I. H.R.D. Organisational M.I.S

PlanningDevelopment

`

6) RESOURCES

PHYSICAL HUMAN INFORMATION FINANCE TIME ENERGY

2) OUTPUT 1) CUSTOMER

DiplomaEngineer External

with 1.Industries

desired 2. Serviceskills Sector

InternalManpowerStaff of:having

knowledge, 1. MOEskills and 2. DTE/attitudes DIIC/required to

MSBTEuse,operate, &

evaluate,Regional

update and Officesmaintain ANDMIS Faculty

Feed BackFig 1 Systems Approach

4

1.4 Curriculum goals

1. To develop l. confidence in students by providing more exposure to industry

experience and world of work at global leve

2. To provide conceptual knowledge and develop analytical ability

3. To develop communication skill with good English by providing sufficient practice

4. To enhance latest technical knowledge industry interaction and media

5. To develop learning to learn skills and life skills to cope up with industrial culture

6. To impart managerial skills by providing appropriate theoretical inputs

7. To develop problem solving ability through technical projects.

1.5 DESIRED SKILLS

Industries expect from the diploma engineer the abilities and skills of general nature and

specific to the job performance. The curriculum aims at developing life skills and

technological skills so that the diploma pass outs would be suitable for industry. The

skills are listed below:

Life Skills:

Search information from various sources

Develop communication ability

Develop Presentation skill

Work as a member of a team/group and as leader

Collect field data

Develop Learning to learn

Write report for given task/work/project

Develop computer proficiency

Develop observation skills.

Technological Skills:

Diploma engineers should possess following intellectual and motor skills in order

to satisfactorily perform duties assigned to them:

A) Intellectual skills.

1) Draw labeled block diagram of Op-amp.

2) To specify and define different parameters of op-amp.

5

3) Interpret ideal transfer characteristics of op-amp.

4) Differentiate open loop and closed loop configurations of Op-amp.

5) Identify inverting and non-inverting configuration.

6) Construct integrator and differentiator.

7) Compute component values for instrumentation amplifier.

8) Explain IC LM-324.

9) Explain different applications of Op-amp.

10) Distinguish the types of filter.

11) Explain active and passive filters.

12) Explain different parameters of filter.

13) Draw block diagram of IC 555.

14) Understand industrial applications of IC 555,565.

15) Explain concept of oscillator.

16) Explain different types of oscillators.

17) Develop multivibrators and oscillators for given values.

B) Motor Skills.

1) Measure various op-amp parameters and.

2) Assemble the various circuits and observe the output waveforms.

3) Plot frequency response and determine cut-off frequency.

4) Development of small circuit.

1.6 Salient Changes in the curriculum:

For First Semester Basic Science is divided into two parts- Basic Physics and Basic

Chemistry. Theory examination of both parts as well as practical examination of both parts will be conducted on separate days. Sum of theory marks of both parts shall be considered for passing theory examination of Basic Science. Similarly it is applicable to practical examination. It is mandatory to appear for theory and practical examination of both parts. Candidate remaining absent in any examination of any section will not be declared successful for that exam head.

For second semester Applied Science is divided into two sections- Applied Physics and Applied Chemistry where the theory examination of 50 marks each and practical

6

examination of 25 Marks each will be conducted separately and the minimum passing

marks for Applied Science will be the combination of both the sections. . It is mandatory

to appear for theory and practical examination of both parts. Candidate remaining absent

in any examination of any section will not be declared successful for that exam head.

The components of Development of Life Skills were taught in two semesters. In

Development of Life Skills –I the topics related to personal development, such as Learning to Learn Skills, personality development, presentation skills etc. were included. In Development of Life Skills – II the topics related to Team Building, Leadership, group behavior etc. were covered. In the revised curriculum the scope of development of life skills has been broaden to include behavioral science component. Therefore the subject Development of Life Skills – II has been renamed and it is now included at Vth Semester in the revised curriculum under the title Behavioral Science.

The subject of Professional Practices was introduced to integrate the skills acquired in

Development of Life Skills, through technical subjects from second to sixth semester. The experience in implementing the contents of the subject shows that there are limited activities possible in second semester as the technical knowledge given to the students is very limited. Also at sixth semester the student are doing projects in which they are performing many activities included in the Professional Practices and therefore it is proposed that the subject of Professional Practices be prescribed only for three semesters vis. Third, fourth and fifth semesters.

Introduction of Environment Studies at fourth Semester for all courses

From the experience of implementation of Elective Subjects at V and VI semesters in last five years, it is proposed to have only one elective at the sixth semester for all courses. However the specialized courses like Medical Electronics, Electronics and Video Engineering will not have provision for electives. For elective, student will have to choose one from the given two/three subjects.

While revising the curriculum redundant /obsolete topics/sub topics are being replaced by new/advance technology topics/sub topics.

In Electronics Engineering Group LIC has been added as an independent subject. Topics on applications of IC 741,IC 555 and IC 565 have been included in the subject.

7

2. OBJECTIVES

2.1 Introduction

Objectives are the statements which describe the expected learning outcome. Such

statements enable teachers to plan instructional process with appropriate resources. These

objectives also provide a direction to frame proper questions to assess the learning

outcome. During last decade there has been research on cognitive approach in

psychology. This approach is based on biological structure of brain and meta-cognitive

knowledge dimension. Important elements of this approach which form basics of learning

are explained below.

2.2 Domains of Learning:

Learning is a process by which students develop relatively permanent change in mental

associations through experience. This is how learning is defined by cognitive psychologists.

Behavioral; psychologists define learning as a relatively permanent change in behavior.

There are following domains of learning:

A: Cognitive Domain relates to intellectual skills or abilities

B: Affective Domain relates to emotions, feelings, likes, dislikes etc.

C: Psychomotor Domain relates to manipulative skills of hands, legs. Eye-hand coordination

in Engineering & Technology courses, endeavor is made to design curriculum with a focus on

development of cognitive skills through classroom teaching. Where as manipulative

(psychomotor) skills are developed in workshops, laboratories & seminars where students work

individually or in a group. Development of affective skills attitudes and value is supposed to be

acquired through projects and co curricular activities. These are also developed from the work

culture or institutions.

How far a student has developed these abilities/skills especially from cognitive and

psychomotor domains is assessed on the basis of suitable examinations. When classroom and

laboratory teaching is viewed in this light, evaluation becomes an integral part of teaching –

learning process.

2.3 LEVELS OF LEARNING:

Question paper is a tool/ instrument designed to test the extent of learning of the student. Various

questions set in a question paper should assess the abilities of students to respond to level of

8

learning. Dr. Bloom a German educationist classified levels of learning in cognitive domain for

the purpose of writing objectives and assessment. Dr. Bloom’s revised taxonomy is based on

cognitive psychology and is two dimensional. First dimension is cognitive process dimension ad

other is knowledge dimension. Details of these two dimensions are given below.

2.4.1 Cognitive Domain:

Dr. Benjamin Bloom (1956) analysed questions asked in various examinations in American

situation and proposed a hierarchical arrangement of instructional objectives (Intellectual

abilities) tested by these questions.

The lowest level of cognitive learning achieved by a student is demonstrated by the recall of

information that the student retrieves from his long term memory. So, the storage and retrieval of

specific facts, concepts, principles, laws, definitions, properties, procedures etc. directly from

memory was classified as a knowledge level objective. Thus questions testing memory of

students were treated as at the lowest level of the hierarchy of intellectual abilities. The other

levels of hierarchy proposed by Dr. Bloom in 1956 relate to the degree of information processing

required in the brain needed to provide answer to a question. The various levels in the cognitive

hierarchy proposed by Dr. Bloom in 1956 and further revised in 2001 are given below in the

diagrammatic form.

6

5

4

Create

Evaluate

3

2

Analyse

Apply

1Understand

Remember9

Following are the details of each level which indicate the general and specific objectives. Further

appropriate verbs are given which are useful in setting good questions. In this table only four

levels are considered for diploma students.

Description of the Major Levels in the Illustrative General Illustrative verbscognitive Domain (Bloom’s Taxonomy) Instructional Objectives for stating

specific learningoutcomes

Remember – Knowledge is defined as the Knows common terms, Define, describe,remembering of previously learned specific facts, basic identify label, list,material. This may involve the recall of a concepts, principles, match, name,wide range of material, from specific facts methods & procedures outline,to complete theories, but all that is required reproduce, select,to mind of the appropriate information. This staterepresents the lowest level of learningoutcomes in the cognitive domainUnderstand – This is defined as the ability Understands fact, Convert,to grasp the meaning of material. This may principles Interprets distinguishbe shown by translating material from one verbal material, estimate, explain,form to another (words or numbers) by Interprets charts, tables, extend, generalize,interpreting material (explaining or graphs. give examples;summarizing), and by estimating future Translates verbal infer, paraphrase,trends (predicting consequences or effects). material to predict, rewrite,Draw sketches these learning outcomes go mathematical formula. summarize, drawone step beyond the simple remembering of Estimates labeled sketches.material and represent the lowest level of consequences impliedunderstanding. in data. Justifies

methods & procedures.Apply – Application refers to the ability to Applies principles to Change, compile,use learned material in new and concrete new situations. Applies demonstrate,situations. This may include the application theories to practical discoverof such things as concepts, principles, rules, situations. Solves manipulate,methods, laws and theories. Learning mathematical problem. modify operate,outcomes in this area require a higher level Construct charts, predict, prepare,

10

of understanding than those under the level graphs Demonstrates produce, show,described earlier. correct usage of a solve, use.

procedureAnalyze – Analysis refers to the ability to Recognizes unstated Breakdown,break down material into its component assumptions and diagram,parts so that its organizational structure may logical fallacies in differentiate,be understood. This may include the reasoning. discriminate,identification of the parts, analysis of the Distinguishes between distinguish,relationship between parts, and recognition facts and inferences. identify illustrate,of the organizational principles involved. Evaluates relevance/ infer, outline,Learning outcomes here represent a higher adequacy of data. point out, relate,intellectual level than “understand” and select, separate,apply because they require an understanding subdivide.of both the content and the structural formof the material.

2.4.2 Categories of Knowledge Dimension

After considering the various designations of knowledge types, especially developments

in cognitive psychology that have taken place since the original framework of Bloom’s

taxonomy, knowledge is categorised in 4 types – Factual , Conceptual, Procedural and Meta-

cognitive.

Factual Knowledge (A) is knowledge of discrete, isolated content elements. It includes

knowledge of terminology and knowledge of specific details and elements. In contrast,

Conceptual Knowledge (B) is knowledge of “more complex, organised knowledge form”. It

includes knowledge of classifications and categories, principles and generalizations and theories,

models and structures.

Procedural Knowledge (C) is “knowledge of how to do something”. It includes knowledge of

skills and algorithms, techniques and methods, as well as knowledge of criteria used to determine

and/or justify “when to do what” within specific fields and disciplines.

Meta-cognitive knowledge (D) is “knowledge about cognition in general as well as awareness of

and knowledge about one’s own cognition. It encompasses strategic knowledge, knowledge

about cognitive tasks, including contextual and conditional knowledge; and self-knowledge”.

Assessment is required to be done on the basis of categories of knowledge and levels of learning.

Table below indicates the two dimensional grid based on Blooms Taxonomy for setting

questions.

11

KnowledgeCOGNITIVE PROCESS DIMENSION

Dimension 1 Remember 2 Understand 3 Apply 4 Analyze

A. FactualKnowledge

B. ConceptualKnowledge

C. ProceduralKnowledge

D. Meta-cognitiveKnowledge

2.5 Components of Curriculum:

2.5.1 Rationale: It indicates the logical basis for the inclusion of the subject in the curriculum It also indicates the importance of the subject related to entire curriculum.

Rationale tells the students the connection of subjects related to study of higher level subjects and also the use in their job/profession.

2.5.2 Objectives: Objectives indicate what the student will be able to do/perform after he/she completes the study of the subject. It also in other words indicates the scope of the subject.

Objectives indicate what is achievable and hence gives direction to the student about how to study the subject, what important things are to be observed and performed during practicals.

Just as rationale indicates the use of the knowledge gained while studing the subject, objectives indicate how efficiently and effectively one can work if the objectives are fulfilled while studying the subject.

2.5.3 Learning Structure: It graphically/pictorially indicates the content of the curriculum of the subject and what is to be learnt in the subject. As you know that Cognitive Domain knowledge is divided in four components as mentioned in the Two dimensional grid. Of this Factual, Conceptual and Procedural knowledge components are identified in the curriculum of the subject along with the applications.

12

Facts, Concepts, Principles are used in developing procedures and applications. So these are given sequentially below procedure as Principles, Concepts and Facts in their order. Learning structure also provide an idea about how to develop the subject logically to achieve the objectives.

2.5.4 Contents: List of topics and subtopics to be included in the curriculum of the subject is given in the contents. This helps in achieving the rationale and objectives identified. Contents indicate the importance of the topics, sub topics in development of the subject and accordingly weightages in terms of Hours required to teach the subject components, so that the desired learning takes place. Marks to be allotted while testing the knowledge gained by the student are also indicated.

2.5.5 Practicals: While designing the curriculum the objectives are identified. To achieve these objectives students have to develop certain intellectual and motor skills. These skills are developed through well designed Practicals. So in the curriculum the list of the skills to be developed through Practicals is given. The list of Practicals is so developed that after performing the Practicals identified skills will be developed. Here it is necessary that the teacher gives enough opportunity to all the students to perform the practical properly to develop the skills in each one of them.

The skills will be developed if the students actually perform certain activities or tasks. Therefore it is necessary that any practical included in the curriculum necessarily involve some activities to be done by the students. So one has to think and innovate to modify the study experiments so that students will be asked to perform some activity. It could be in terms of identifying components, listing of materials used for manufacturing the components, stating importance of use of certain materials etc.

So any curriculum of a subject is so designed that it achieves the objectives of that subject as well as fulfill the objectives of the entire curriculum

3. CONTENT ANALYSIS

3.1 Components of Content Analysis:

As we have discussed earlier, any curriculum or syllabus of a SUBJECT given to the teacher is

organised in terms of UNITS which include TOPICS or SUB-TOPICS as the case may be

indicating the TIME in which it is expected to be taught to the students. Components of a topic

or part thereof are analysed here at a micro level.

13

Before we begin actual teaching of any topic (lesson), we must carefully and critically analyse it

so that we can plan for teaching - select appropriate media, methods and techniques of teaching

and arrange the suitable resources to be required. This analysis of the content of a Topic results

in identification of the following components of the content:

1. Facts

2. Concepts

3. Principles (rules, laws, theories)

4. Applications

5. Procedures

6. Skills (Psychomotor Skills), and

7. Attitudes (underlying affective behaviors as quite often these are not specifically

mentioned in the curriculum, still they are to be developed lesson after lesson gradually).

When we undertake the exercise of content analysis, we ourselves understand the subject fully

well and at the same time we become clear as to what we are going to teach. It also gives us an

idea as to which methods of teaching and media of instruction we should prepare and use and

also what resources including time we will require. This analysis will also enable us to design

assignments as well as how we are going to assess students learning.

Since the nature of the components of content (1 to 7) differs from one another. These are

learned by the students differently as different mental processes are involved in learning these

components. The immediate implication of this varying nature of components is that these need

to be taught differently and assessed differently. For example, if you look at components I to 5

all of which belong to Cognitive Domain of Learning; Component 6 belongs to Psychomotor

Domain and Component 7 belongs to Affective Domain (cannot be taught as these attitudes are

caught), you will find that these differ from one another. The classification of human behaviors

(activities) into the above three domains of learning entails the use of entirely different methods

and media of instruction. Different locations of learning (classroom, laboratories, workshops,

field visits) need to be selected.

Now we will discuss these components in some detail and see how each one of these should be

taught and assessed differently.

3.1.1 FACTS:

14

These are universally accepted and commonly understood items about which there cannot

be much argument and discussion. These are required only to be informed. For example: The sun

rises in east and sets in the west; names of scientists and the year in which their theories were

propounded; the rules and regulations of admission and examination prescribed by the University

are some of the examples of facts. Sometimes, they need not be emphasised in the class as the

students already know them. But information can be passed on by word of mouth, if deemed

necessary.

3.1.2 CONCEPTS:

A concept is an abstraction or an idea that permits the learner to classify a variety of

related phenomena into a convenient and meaningful category. Concept of something is like a

picture formation of that thing which helps in conceptualizing it. Gagne says that concept

learning produces a certain fundamental change in human performance that is independent of

subject or content. Concepts can be divided into the following two categories:

1. Concrete Concepts: those which can be seen, touched and manipulated e.g.

house, book, table, chair, cat, dog, any machine or apparatus, overhead projector,

chalkboard and duster.

2. Abstract Concepts: those which cannot be seen and touched and handled but can

only be imagined e.g. force, work, fractions, decimal, bending moment, moment of

inertia, friction, heat, and induction. Teaching of concrete concepts is not that difficult

because the teacher can show the object physically or its picture. On the contrary,

teaching of an abstract concept offers difficulty to the teacher as well as for students to

understand. These concepts can be learned by heart without understanding as children

mug up Nursery Rhymes without understanding even a single word. But at the stage of

higher tearing, this type of rote learning is not desirable. Adolescents (teenagers) and

adults do not accept things without understanding.

3.1.3 Concept Attributes:

15

We identify a concept and understand it, once we are told about its qualities

characteristics, and features. They are technically called concept attributes. While teaching a

concept to our students we must spell out as many attributes as possible for better understanding

of the concept.

Example: The Concept Operational Amplifier

Attributes:

1. Operational amplifier is an amplifier.

2. It is useful for mathematical operations.

3. Basically OPAMP is differential amplifier.

4. It provides 00 or 1800 phase shift between input and output.5. Its input and output impedance is better than transistorised amplifier.

Towards the end of this Theme Paper a number of examples of concept attributes are

given for your guidance.

The following questions pertaining to a concept (object or process) will be helpful in writing

concept attributes:

1. What it is.

2. What are its constituent parts?

3. How it works.

4. How it is similar to and different from other known concepts.

5. What are its uses?

3.1.4 PRINCIPLES:

A principle is a statement of relationship between two or more concepts. Principles are

sometimes called rules, laws or generalizations. In others words, relationship between two or

more concepts which is scientific and universally true is called a Principle.

For Example: (related concepts are underlined)

1. For OPAMP Large Signal Voltage gain = Output voltage / Input voltage.

2. CMRR = Differential Voltage Gain / Common mode Voltage Gain.

CMRR = Ad / Acm

16

CMRR is a principle, where Differential Voltage Gain (Ad) , Common mode Voltage Gain (Acm)

are the concepts. While teaching a principle we must recall the concepts which it involves. These concepts might have been taught in the previous lesson. As you already know, concept learning is a prerequisite to Principle learning. Thus we recall the concepts of Differential Voltage Gain and Common mode Voltage Gain by asking questions to the students. Only after that we must tell the relationship among them.

3.1.5 APPLICATIONS:

Whatever principles, laws and theories have been learned are only academic exercises unless

these are applied to solve a practical problem. In other words, we call this application transfer of

learning to a new situation. If you recall, the process of learning dealt with in Theme Paper 2,

you will appreciate that the litmus test of learning having occurred is its application in a new

situation or solving a new problem.

For example:

1. The voltage gain can be applied to find out the output voltage when input is applied to

OPAMP.

2. Design of a structure can be made based on related principles and theories.

3. Principles of learning and events of instruction can be applied in ‘Designing a lesson

Plan' and 'Presenting the lesson in the classroom".

4, Above principles can also be applied while preparing textbooks, workbooks, learning

packages and laboratory manuals to be used by the students.

3.1.6 PROCEDURES:

While analysing the content of a topic you might come across certain standard procedures

which are prescribed to perform an operation or a given task. These procedures should be clearly

identified and taught accordingly not to be left to chance. We should not pre-suppose that the

students understand them. We cannot afford to take these things for granted.

For Example:

1. Procedure of building circuits.

2. Procedure to apply input signal.

3. Procedure to operate CRO to verify output of circuit.

3.1.7 SKILLS (PSYCHOMOTOR):

17

A skill is an ability to perform a task expertly and well. The skilled performance; must meet a

pre-specified standard of acceptable performance. A skill has the following three characteristics:

1. It represents a chain of motor responses;

2. It involves the co-ordination of hand and eye movements, and

3. It requires the organization of chains into complex response patterns.

Skills could be intellectual (thinking, understanding); interactive (communication skills) and

social (socialising, mixing up with others) also. But normally when we use the word skills, it

refers to psychomotor skills.

For Example:

1. Place components and connectors on breadboard,

2. Adjust the settings of signal generator,

3. Adjust power supply voltages, and

4. Adjust the CRO or measuring instrument.

Laboratories and workshops of Polytechnics are the locations where these skills are developed

among the students under the guidance of expert instructors of operators. Drill and practice are

the main methods of teaching and learning these skills through model demonstrations and careful

observations thereof.

Alongside developing these skills, desirable attitudes like cooperation, team work, leadership,

safety, cost consciousness are also developed.

3.2 TEACHING OF CONCEPTS;

In order to teach concepts effectively the following steps have been suggested by De Cecco &

Crawford (1974).

Steps Suggested:

1. Describe the performance expected of the student after he has learned the concept.2. Reduce the number of attributes to be learned in complex concepts and make important

attributes dominant.3, Provide the student with verbal indicators (explanation).4. Provide positive and negative examples (non-examples) of the concept.

5. Present the examples in close succession or simultaneously.6. Provide occasions for student responses and the reinforcement of these responses, and7. Assess the learning of the concept.

18

3.3 TEACHING OF PRINCIPLES:

De Cecco & Crawford (1974) has suggested the following steps for teaching principles

effectively.

Steps:

1. Describe the performance expected of the student after he has learned theprinciple.

2. Decide and indicate which concepts or principles the students must recall in learning the new principle.

3. Assist the student in the recall of component concepts.4. Help the student in the recall of component concepts.5. Help the student to combine the concepts and put them in a proper order.6. Provide for practice of the principle and for reinforcement of student responses.7. Assess the learning of the principle.

3.4 CONCLUSION:

To sum up, it can be said that. it is essential for the teachers to develop the skills of 'Content Analysis' of their subjects. It brings content clarity among teachers themselves. More importantly, Content Analysis will be a pre-requisite for writing Instructional Objectives of the topic to be taught. You will study Instructional Objectives in a separate Theme Paper in detail. Teaching and learning process is bound to be effective once these crucial academic activities are undertaken.

19

4. CURRICULUM:

20

21

22

23

24

25

5. IMPLEMENTATION STRATEGY:

5.1 Planning of Lectures for a Semester with Content Detailing:Teacher shall implement the methodology/ techniques mentioned in the following table while teaching the topics. Along with this teacher may use additional/alternative methods to make students learning meaningful.

e.g.

Topic I Name: Operational Amplifier

Knowledge Example/s of category Teaching methodologyCategoryFACT Transistor Amplifier Give them example of audio amplifiers used in

music systems.Gain Show the actual demo of amplifier using

simulation s/w.Eight Pin ICs Show the IC’s.(Pictures or actual IC)

Explain it with reference of number line.Level translator

Push-Pull amplifierCONCEPT Differential Amplifier Define, Explain their block diagrams and

Operational Amplifier with the examples.

Balanced o/p Analogy of weighing balance&Unbalanced o/p When DC level is zero in output-balaced

When dc level is present in o/p-unbalanced

26

Show the waveforms of i/p voltage, o/pvoltages at collectors, between collectors andthen explain inverting input non-inverting i/p

Inverting i/p balanced and unbalanced o/p

Non-Inverting i/p Tell meaning of offset, explain how/why it isgenerated, how to and why to null, with helpof open loop op-amp.

Define parameter, Describe with diagramsOffset voltage

Offset null

OPAMP parameters Show the actual demo of OPAMP parametersmeasurement & effect of these parameters onperformance of opamp using simulation s/w

PRINCIPLE Differential gain Define the term and describe with circuitdiagram.

Common mode gain Discuss the meaning of common mode, definethe term and describe with circuit diagram.

Discuss significance of CMRR. Define andCMRR explain the CMRR.

Discuss significance of SVRR. Define andSVRR explain the SVRR

Discuss the meaning of Slew.SR Define Slew rate and describe with

waveforms of ideal and practical squrewavevoltage with respect to time.Define the term and discuss it’s significance.

Large signal gain Discuss proportionality between Gain andBandwidth, explain with example.

Gain bandwidth Also measure and show the effect of theseproduct parameters on output in laboratory

Learning Resources:

Books:

27

Title:1)Ramakant Gaikwad – Operational Amplifier and Linear Integrated Circuits2) K. R. Botkar – Integrated Circuits3) R. F. Coughlin – Operational Amplifier And Linear Integrated Circuits

Teaching Aids:Black Board,PPT: Detail circuit diagram of OPAMP.

Lecture Topic/ Subtopic to be coveredNo.1 Review of Amplifier and concept of OPAMP.

Discus why named Operational Amplifier?List the general operations and mathematical operations possible with OPAMP, Justify its name asoperational amplifier.Block Diagram of OPAMP and function of each block of OPAMP:Input Stage (DIBO), Intermediate stage (DIUO), Level shifter and Output Stage (complementarypush-pull amplifier).

2 Configurations of transistor based differential amplifier:Description of balanced/unbalanced differential amplifiers (DIBO, DIUO, SIBO, SIUO).Discus the terms: Inverting and non Inverting input terminals.

3 Describe with circuit diagram: Differential amplifiers with constant current source, Level shifterand complementary push-pull amplifier.

4 Draw and describe: Equivalent Circuit of opamp, SymbolsDiscus: Detail circuit diagram of OPAMP with PPT (no marks)

5 Pin diagram and pin functions of IC 741 (Op-Amp).Discus the concept of output offset voltage and offset null (specific functions of Pin 1 and 5 of IC741).

6 Definition/Description/Significance of Parameters of OPAMP:Input offset Voltage, Input Offset Current and Offset Voltage Adjustment Range.

7 Definition/Description/Significance of Parameters of OPAMP:Input Bias current, Differential Input Resistance, Input Capacitance, Input Voltage Range, CMRR.

8 Definition/Description/Significance of Parameters of OPAMP:Supply Voltage, SVRR, Output Resistance, Large Signal Voltage Gain.

9 Definition/Description/Significance of Parameters of OPAMP:Slew Rate, Gain bandwidth product, Output Short Circuit Current

10 Definition/Description/Significance of Parameters of OPAMP:Output Voltage Swing,Draw and discus: Transfer Characteristic of OPAMP (Ideal and practical)

Topic Name: Op-AMP Configuration:2

Knowledge Example/s of category Teaching methodologyCategoryFACT Inverting, Non-Inverting and Actual demo of i/p & o/p pattern of amplifier

Differential amplifier with simulation s/w or animated videos.

Ground Define and discuss meaning of ground.

28

CONCEPT Virtual ground Discuss meaning of virtual and describe concept

Virtual shortof virtual ground and virtual short with circuit

diagrams.

Addition, Subtraction, Discuss how these operations are performed onScaling of voltage signals voltage signal, give some example and show o/p

using simulation s/w or in laboratory.Differentiator Describe the term differentiator. Draw the

Integrator circuit and derive relationship between i/p and

o/p. Show i/p and o/p waveforms.

Frequency compensation Explain with diagram

PRINCIPLE Open loop gain Discuss the terms open loop, close loop and

close loop gainfeedback gain.

feedback gainPROCEDURE Derive: open/close loop gain By interacting with students develop/derive the

(inv, noninv, differential expression step by step.amplifier)

O/p expression for By interacting with students develop/derive theintegrator & differentiator expression step by step.using OPAMP

APPLICATION Inverter, Voltage follower, Solve the problems and design of circuits.Addition, Subtraction, Refer the examples in animated PPT’s mentionAveraging, scaling and get questions (from ppts) solved byoperations using OPAMP, students.design of above circuits

Learning Resources:Books:Title:1)Ramakant Gaikwad – Operational Amplifier and Linear Integrated Circuits

2) K. R. Botkar – Integrated Circuits3) R. F. Coughlin – Operational Amplifier And Linear Integrated Circuits

Teaching Aids:Black Board,PPT: Details of - Ground, virtual ground, virtual shorts. Websites:http://www.wisc-online.com/Objects/ViewObject.aspx?ID=SSE7306

http://www.wisc-online.com/Objects/ViewObject.aspx?ID=SSE5403 http://www.wisc-online.com/Objects/ViewObject.aspx?ID=SSE5303

29

Lecture Topic/ Subtopic to be coveredNo.1 Circuits, Operations & Comparison:

Open loop and closed loop configuration of Op-Amp2 Discuss concepts with diagram: Virtual ground, virtual short concept.3 Circuits, Operations & Comparison:

Open loop configuration – Inverting , Non-inverting, Differential4 Circuits, Operations, derivation & design:

Close loop configuration: – Inverting amplifier, Inverter (Sign changer)Refer the site for animated ppt of inverting amplifierhttp://www.wisc-online.com/Objects/ViewObject.aspx?ID=SSE5403

5 Circuits, Operations, derivation & design:Non- inverting amplifier, unity gain amplifier (Voltage follower )

6 Circuits, Operations, derivation & design:Inverting configuration: Adders (summing amplifier, scaling Amplifier, averagingamplifier)Refer the site for animated ppt of summing amplifierhttp://www.wisc-online.com/Objects/ViewObject.aspx?ID=SSE7306

7 Circuits, Operations, derivation & design:Non-inverting configuration: Adders (summing amplifier, averaging amplifier)

8 Circuits, Operations, derivation & design:Differential Amplifier configuration as Subtractor.

9 Circuits, Operations, derivation & design:Basic IntegratorRefer the site for animated ppt of integratorhttp://www.wisc-online.com/Objects/ViewObject.aspx?ID=SSE5303

10 Circuits, Operations, derivation & design:Basic Differentiator

11 Discuss: Basic concept of frequency compensation of Op-Amp and Offset nulling.12 Numerical based on designing of above circuit.

Topic Name: Applications of Op-Amp3

Knowledge Example/s of category Teaching methodologyCategoryFACT Diode, Log & Antilog Revision of topics with Question answer

operationsCONCEPT Transducers Discuss the terms e.g. ears, eyes.

Signal conditioning and Define signal conditioning and signalsignal processing processing and state it’s need.

Instrumentation Discuss why it is called as instrumentation

30

Amplifier amplifier

Log & Antilog amplifier Draw and describe log and antilog withdiagrams

Multiplier Discuss concept with block diagramDivider

S/H Circuit Draw circuit and describe output.Comparators & detectors Actual demo of i/p & o/p pattern of

different circuits with simulation s/w(multisim/labview)

PROCEDURE Derive output expression: By interacting with students develop/deriveInstrumentation amplifier the expression step by step.

APPLICATION I to V & V to I Draw Circuits and describe it’s operationConverters, ZCD, ST, with i/p-o/p patterns.WD, PD,PPD

Learning Resources:Books:Title:1)Ramakant Gaikwad – Operational Amplifier and Linear Integrated Circuits

2) K. R. Botkar – Integrated Circuits3) R. F. Coughlin – Operational Amplifier And Linear Integrated Circuits

Teaching Aids: Black Board

Lecture Topic/ Subtopic to be coveredNo.1 Need for signal conditioning and signal processing2 Instrumentation amplifier: Circuit diagram, operation, derivation of output voltage3 Instrumentation amplifier: IC LM 324: Pin diagram pin functions and specifications, advantages and

applications4 Draw Voltage to current converter with floating load and derive o/p expression

Draw Voltage to current converter with grounded load and derive o/p expression5 Draw Current to voltage converter and derive o/p expression (Also discuss this configuration as

special case of inverting amplifier)Draw circuit and i/p-o/p patterns: Sample and hold circuit.

6 Draw, derive & describe relationship between i/p – o/p: Logarithmic and antilogarithmic amplifiers(using Diodes) [ Note: No marks for derivation]

7 Discuss Concept & describe with the help of circuits:Voltage Comparator (inv & noninv configurations), Detector

8 Draw, describe operation: Zero crossing detector (inv & noninv configuration)Draw & discuss the relationship between i/p –o/p patterns.

9 Draw, describe operation: Schmitt triggerDraw & discuss the relationship between i/p –o/p patterns.

31

10 Draw, describe operation: Window detectorDraw & discuss the relationship between i/p –o/p patterns.

11 Draw, describe operation: Phase detectorDraw & discuss the relationship between i/p –o/p patterns. Draw, describe operation: Active peak detectorDraw & discuss the relationship between i/p –o/p patterns. Also discuss why named as Active peak detector?

12 Draw, describe operation: Peak to peak detectorDraw & discuss the relationship between i/p –o/p patterns.

Topic Name: Filters4

Knowledge Example/s of category Teaching methodologyCategoryFACT Frequency response, BW, Revision of topics with question answer.

Cutoff frequency, Pass Plot/show pattern to differentiateband, Stop band, Pass-band different bands (pass/stop/reject).gain

CONCEPT Filter, Roll of rate, Order of Discuss circuits, its operation, Comparefilter, Center frequency, different filters. Simulate circuit and plotLPF, HPF, BPF, BRF, (wide frequency response.band, narrow band), All passfilter

PRINCIPLE Q factor Measure to decide Quality.Discus the concept, also classification offilters based on it.

APPLICATION Design of filters Solve numerical based on Filter Design

Learning Resources:Books:Title:1)Ramakant Gaikwad – Operational Amplifier and Linear Integrated Circuits

2) K. R. Botkar – Integrated Circuits3) R. F. Coughlin – Operational Amplifier And Linear Integrated Circuits

Teaching Aids: Black Board,

Lecture Topic/ Subtopic to be coveredNo.1 Define filter (frequency selective circuit)

Classification of filters based on: components/frequency response/nature of pass band/roll off rate.,Comparison between passive and active filters

2 List: Merits and demerits of active filters over passive filters,Draw & describe: Ideal and actual characteristics/response of filter.

3 Define & describe: cut off frequency, Pass band, Stop band, center frequency,roll off rate, BW, Q-factor, order of filter

4 Draw & describe operation of First order and second order Butterworth Low pass filter; also stateexpression for pass band gain and cutoff frequency.

32

5 Draw & describe operation of First order and second order Butterworth High pass filter; also stateexpression for pass band gain and cutoff frequency.

6 Draw & describe operation of Band pass filter (wide band pass, narrow band pass filter) also stateexpression for pass band gain and cutoff frequency.Condition to define filter as wide band & narrow band (Q factor).

7 Draw & describe operation of Band reject filter (wide band reject, narrow band reject filter) alsostate expression for pass band gain and cutoff frequency.

8 Draw & describe operation of All pass filter.State the need of All pass filter.

9 Numerical based on design of different filters.10 Numerical based on design of different filters.

Topic Name: Timer5

Knowledge Category Example/s of category Teaching methodologyFACT Comparator Revision of topics with question answer.

SR Flip-Flop Discuss truth table of SR flip-flop

Transistor as switch Explain /revise how transistor used asswitch.

FilterCONCEPT Multivibrator (Astable Mention the examples from day to day

Monostable, bistable) life to elaborate the concept of stablestates and unstable states, also correlatethem with Multivibrator.

Phase detector Draw and describe working with circuitVCO diagram.Phase Lock Loop Draw and describe working with circuit

diagramTimer Give any example of timer in use

PRINCIPLE Frequency of Discuss circuit & its operation show theoscillations and duty demo of variation in time period bycycle for astable, Tp of changing component value.monostablemultivibrator

PROCEDURE Design: AMV, MMV Provide design steps & ask students todevelop circuits for different time period.

33

APPLICATION Water level controller, Discuss circuits & its operationTouch plate switch, Give them mini project based on theseFrequency divider. applications.

Multiplier,FM Demodulator

Learning Resources:Books:Title:1)Ramakant Gaikwad – Operational Amplifier and Linear Integrated Circuits

2) K. R. Botkar – Integrated Circuits3) R. F. Coughlin – Operational Amplifier And Linear Integrated Circuits

Teaching Aids:Black Board,PPT:Websites: http://www.daenotes.com/electronics/digital-electronics/555-timer-ic-stable-multivibrator

Lecture Topic/ Subtopic to be coveredNo.1 Discus: Concept of Timer, Need of Timer,

Specifically discus different circuits which can provide time delay & then introduce IC 555 as timer.2 Draw block diagram of IC 555 & discuss function of each block.

Draw pin diagram of IC 555 & discuss function of each pin.Discus the operation of Timer (IC 555) with the help of its block diagram.

3 Discus the following configuration so as to design (numerical on Timer) AMV :Circuit, operation & design of AMV using Timer IC 555Circuit, operation & design of square wave generator (AMV) using Timer IC 555Refer the site for animation of multivibratorshttp://www.daenotes.com/electronics/digital-electronics/555-timer-ic-stable-multivibrator

4 Discus the following configuration so as to understand further applications:Circuit, operation & design of MMV using Timer IC 555Circuit & operation of (application of Timer IC 555) Touch plate switchCircuit & operation of (application of Timer IC 555) Frequency divider

5 Discus the following configuration so as to understand further applications:Circuit & operation of BMV using Timer IC 555Circuit & operation of (application of Timer IC 555) Water level controller

6 Numerical based on Timer:Design the circuits using Timer IC 555: AMV, square wave generator, MMV.Eg. Design AMV for fosc=1KHz

Design MMV for tp=10msce78 Discus concept PLL, need of PLL.

Draw block diagram of PLL & discuss function of each block.Discus the operation of PLL with the help of its block diagram.Discus the terms: Capture Range, Lock range, (as theses terms describe the functioning f PLL)

9 Applications of PLL:

34

Circuit & operation of PLL as FM demodulatorCircuit & operation of PLL as Multiplier

10 Draw pin diagram of IC 565 & discuss function of each pin.Discus the operation of PLL IC 565 with the help of its block diagram.

Topic Name: Oscillators6

Knowledge Category Example/s of category Teaching methodologyFACT Oscillators,AMV,MMV,BMV,VCO Revision of topics with

Question answerPRINCIPLE Frequency of oscillations of Phase Discuss circuit & its operation

shift show the demo of variation inFrequency of oscillations of Wien frequency by changing thebridge Oscillator component value.

Frequency of oscillations and duty Discuss circuit & its operationcycle for Astable multivibrator show the demo of variation inTp of monostable multivibrator time period by changing

component valuePROCEDURE Design - AMV Give numerical based on design

Design – MMV of MMV and AMVAPPLICATION Phase shift Oscillator using 741 Demonstration of operations

Wein bridge Oscillator using 741 with animated PPT.

Astable Monostable,bistable using741 & IC 555

Schmitt trigger and VCO using IC555

Learning Resources:Books:Title:1)Ramakant Gaikwad – Operational Amplifier and Linear Integrated Circuits

2) K. R. Botkar – Integrated Circuits3) R. F. Coughlin – Operational Amplifier And Linear Integrated Circuits

Teaching Aids:Black Board, PPT: Websites:

Lecture Topic/ Subtopic to be coveredNo.1 Revise the concept of oscillators and it’s types

35

2 Draw & describe operation of phase shift oscillator using IC 741.State the relation for o/p frequency.Design phase shift oscillator using IC 741 for desired frequency (No marks).

3 Draw & describe operation of Wien Bridge oscillator using IC 741.State the relation for o/p frequency.Design Wien Bridge oscillator using IC 741 for desired frequency (No marks).

4 Draw the circuit; describe operation AMV and MMV using Timer IC 555.Draw the pattern for Vcapacitor and Voutput of AMV using Timer IC 555 and correlate them.Draw i/p and o/p pattern for MMV using Timer IC 555and correlate them.

5 Draw the circuit, describe operation BMV and Schmitt trigger using Timer IC 555Draw i/p and o/p pattern for MMV using Timer IC 555 and correlate them.

6 Draw the circuit, describe operation AMV using OPAMP IC 741Draw the pattern for Vcapacitor and Voutput AMV using Timer IC 741 and correlate them.

7 Draw the circuit; describe operation MMV and BMV using OPAMP IC 741.Draw i/p and o/p pattern for MMV using OPAMP IC 741and correlate them.Draw i/p and o/p pattern for BMV using OPAMP IC 741and correlate them.

8 Discus the concept of VCO & its need.Draw the circuit, describe operation of VCO using Timer IC 555

5.2 Planning and Conduct of Test:

a) The time table and sample test paper for the test should be displayed minimum 10 days before the test.

b) Each test will be of 25 marks.c) First test should cover about 40% of curriculum and second test should cover

remaining curriculum.d) Format for question paper should be as per the sample question paper supplied by

MSBTE.

e) Guidelines for Setting Class Test Question Paper: Question no.1 Attempt any three out of four (3X3=9 Marks) Question no.2 Attempt any two out of three (2X4=8 Marks) Question no.3 Attempt any two out of three (2X4=8 Marks)

5.3 Details about conduct of assignments:

Chapter wise question bank to be prepared and given to the students as assignments.

5.4 Strategies for Conduct of Practical:

5.4.1 Approach for design of Manual: Basic approach of Lab manual is to develop better understanding of subjects and

to develop Intellectual skills and Motor skills as per subject objectives.

36

While designing the experiments, various activities should be added in the experiments so that the contents can be related to applications in the industry.

5.4.2 Suggestions for effective conduct of practical and assessment: Subject teacher shall prepare laboratory planning (D2) format in duplicate. One copy of

laboratory planning (D2) shall be displayed on Laboratory/Departmental Notice board for student’s information. Subject teacher shall conduct practical as per planning and assess regularly.

Display the given data of each experiment in the laboratory. Display the chart of all Instruments which are required to the practical of

Basic Electronics. At the beginning of the semester, Lab assistant and Subject teacher should check the

ensure that the equipment’s required to conduct practical are in conduct practical using standard calibrated instruments and maintain calibration register and maintenance register.

Teacher should refer the guidelines given in laboratory manual. Teacher should make the students aware of instructions given in the laboratory manual. Teacher should motivate the students by taking activities on related contents in theory

and practical. There should be one revision practical so that students can grasp the content deeply. Teacher should assess the students on the basis of his/her participation in a group and

performance in a group during practical as per MSBTE rule. Teacher should give Marks out of 10 for each practical.

5.4.3 Preparation for conduct of practical Experimental set up with sample reading (Expected results) should be prepared by

the concerned teacher before the commencement of each experiment. Teacher should give the instruction regarding proper handling of Instruments,

precautions while performing the experiments.

5.5 Additional guidelines to conduct course smoothly. Use PPT’s, internet, CD/DVD’s readymade charts/graphs, video may help students

to learn subject easily. Prefer use of recommended reference book for teaching/ learning purpose.

Overview of topics covered in last lecture at start of current lecture is expected. Assignments or homework based on last lecture or related to next lecture may be

helpful for all students. Preparation and Circulation of chapter wise question bank based on sample question

paper, MSBTE old question paper will definitely give good idea to students about subject.

Showing of components, portable electronics equipment’s, working models, simulations, project boards will definitely give brief idea about subject to understand electronics to the students.

37

6. Mode of assessment:

1.1 Class Test: There will be two tests each of 25 marks. The tests will be conducted as per the MSBTE schedule. Teacher should prepare model answer of class test question papers. After completion of test, subject teacher should display model answer

on Department Notice Board. Teacher should show the answer paper of class test to the student and discuss

about the mistakes. Teacher should maintain the record of class test as per MSBTE

norms (CIAAN)

38

6.1.2 Sample Test Papers:

Sample Test Paper-I

Roll No. 17445

Institute Name:Course Name: ELECTRONICS AND TELECOMMUNICATION ENGG. CourseCode: EJSemester : IVSubject: LINEAR INTEGRATED CIRCUITSMarks: 25 Time: 1 hourInstructions:

1. All questions are compulsory2. Illustrate your answers with neat sketches wherever necessary3. Figures to the right indicate full marks4. Assume suitable data if necessary5. Preferably, write the answers in sequential order

Q1. Attempt any THREE 09a. Draw and describe ideal transfer characteristics of op-amp.b. Define operational amplifier. Draw block diagram of op-amp.c. Draw the op-amp based circuit diagram to provide following

operation Vo=5V and Vin= -1Vd. Define output offset voltage. Describe how offset nulling is achieved in op-amp.

Q2. Attempt any TWO 08a. Define:

i. SVRRii. CMRR

iii. Input offset currentiv. Output voltage swing

b. Design and draw op-amp based circuit for following operation, Fig

c. Draw three input summing amplifier using op-amp. describe how it can be used as scaling amplifier.

Q3. Attempt any TWO 08a. Draw op-amp based circuit for following

operation Vo = -(V1+V2+V3)/3

39

Also state the value of input resistor if Rf=3KΩb. List any four advantages of instrumentation amplifierc. Draw and describe I to V converter using op-amp

40

Sample Test Paper -II

Roll No. 17445

Institute Name:Course Name: ELECTRONICS AND TELECOMMUNICATION ENGG. CourseCode: EJSemester : IVSubject: LINEAR INTEGRATED CIRCUITSMarks: 25 Time: 1 hourInstructions:

1. All questions are compulsory

2. Illustrate your answers with neat sketches wherever necessary

3. Figures to the right indicate full marks

4. Assume suitable data if necessary

5. Preferably, write the answers in sequential order

Q1. Attempt any THREE 09a. Draw Non-inverting Zero Crossing Detector (ZCD). State any two applications of ZCD.b. Draw second order low pass filter and write expression for cut off frequency.c. State the need of all pass filters and draw the circuit diagram of it.d. Draw pin diagram of IC 555 and state function of reset pin.

Q2. Attempt any TWO 08a. Describe the operation of phase detector with the help of circuit diagram.b. Design second order Butterworth high pass filter with cut off frequency 20 KHzc. Draw ideal and practical response of following

i. LPFii. HPFiii. Wide BPFiv. Wide BRF

Q3. Attempt any TWO 08a. Draw block diagram and describe operation of frequency multiplier using PLL.b. Draw and describe touch plate switch using IC 555c. Suggest and draw IC 555 based circuit with supply voltage Vcc = 6V for following

operation.

Fig

41

42

6.2.3 Sample Question Paper:

Exam Seat No. 17445

Maharashtra State Board of Technical Education

Course Name: Electronics Engineering Group

Course Code: ET/EN/EX/EJ/IE/IS/IC/DE/EV/MU/IU/ED/EI

Semester: IV

Title of the Subject: LINEAR INTEGRATED CIRCUITS Subject Code: 17445

Marks: 100 Time:

Instructions:

1. All questions are compulsory

2. Illustrate your answers with neat sketches wherever necessary

3. Figures to the right indicate full marks

4. Assume suitable data if necessary

5. Preferably, write the answers in sequential order

Q1. Attempt any SIX 12A)i. Define:

a)Input offset voltage b)Slew Rate

ii. Draw circuit diagram of basic differentiator using op-ampiii. List any four specification of IC LM 324iv. State the need of signal conditioning(any two points)v. Define sample period and hold period with reference to sample and hold circuitvi. Define:

a) Q factor of filterb) Passband of filter

vii. Draw circuit diagram of narrow band reject filter using op-ampviii. State functions of following pins of IC 555

a)Thresholdb)Discharge

.

Q1. Attempt any TWO 08

43

B)i. Describe the function of input stage and level shifting stage of op-amp with it’s block

diagramii. State ideal values of following parameters of op-amp as well as state typical values of

following parameters of op-amp IC741iii. Describe the term dual i/p balanced o/p differential amplifier and dual i/p unbalanced

o/p differential amplifier and draw single i/p unbalanced o/p differential amplifier

Q2 Attempt any FOUR 16a. Compare open loop and closed loop configuration of op-amp on following basis

i. Circuit Diagramii. Gain

iii. Bandwidthiv. Application

b. Describe virtual ground and virtual short concept with reference to op-amp.c. Draw closed loop Non-Inverting amplifier using op-amp and derive expression for it’s

gain.d. Derive the expression for relation between i/p and o/p of basic integrator and

draw basic integrator.e. Design and draw the circuit for the following operation using op-amp

Vo=2V1+V2-5V3f. Suggest op-amp based circuit to convert squrewave to triangular wave and draw

the circuit diagram with input and output waveform.

Q3 Attempt any FOUR 16a. Describe the operation of instrumentation amplifier with transducer bridge with help of

neat circuit diagram.b. Draw circuit diagram of grounded load type V-I converter and derive expression for

it’s output.c. State the needs of peak to peak detector and draw it’s circuit diagram.d. Draw and describe following op-amp based operation using log and antilog amplifier

Vo=V1×V2e. Draw circuit diagram and input output waveforms of inverting ZCD and non-inverting

ZCDf. Describe the operation of op-amp based Schmitt trigger for sine to

squarewave conversion with the help of it’s circuit diagramQ4 Attempt any FOUR 16a Suggest an OPAMP based circuit to perform above operation

44

b. Design and draw low pass filter with cut off frequency 2 Khz and passband gain of 2.

c Suggest and draw op-amp based circuit using Butterworth filter to fulfill following response

d. Describe the operation of wide bandpass filter with the help of circuit diagrame. Draw the circuit diagram of op-amp based filter circuit which provides

following response and describe it’s operation.f. Classify the op-amp filters on following basis:

1.Components used2.Frequency range3. Frequency response4.Nature of passband and stopband

Q5 Attempt any FOUR 16a. Draw the block diagram of SE 555.State the function of both internal transistors in

IC 555.b. Draw and describe the operation of water level controller using IC 555.c. Draw and describe the operation of frequency divider using IC 555.d. Describe the operation of phase detector and role of VCO in PLL.e. Define and state the expression for lock range and capture range of PLL.f. Describe with the help of block diagram the operation of FM demodulator using PLL.

45

Q6 Attempt any FOUR 16a. Draw the block diagram of VCO using IC 555.Describe how output frequency

varies with the variation in voltage applied to pin 5 of IC 555.b. Draw the circuit diagram of square wave generator using IC 555. State the purpose of

external diode used in the circuit and state expression of it’s output frequency.c. Design and draw monostable multivibrator using IC555 with Tp=1ms.d. Design and draw op-amp based Wein Bridge oscillator for frequency 1KHz.e. Draw and describe operation of Bistable multivibrator using op-amp.f. How much is overall phase shift in op-amp based phase shift oscillator and how it

is achieved. Draw it’s circuit diagram.

46