Victorian Purchasing Guide for RII Resources and … · Web viewSupervise underground in-seam directional drilling operations 65 RIINHB501E Plan drilling 60 RIIOGD201D Assist in maintaining

Victorian Purchasing Guidefor

RII Resources and Infrastructure IndustryRelease 2

April 2016

© State of Victoria (Department of Education and Training) 2016.Copyright of this material is reserved to the Crown in the right of the State of Victoria. This work is licensed under a Creative Commons Attribution-NoDerivs 3.0 Australia licence (http://creativecommons.org/licenses/by-nd/3.0/au/). You are free use, copy and distribute to anyone in its original form as long as you attribute the Department of Education and Training (DET) as the author, and you license any derivative work you make available under the same licence.

DisclaimerIn compiling the information contained in and accessed through this resource, DET has used its best endeavours to ensure that the information is correct and current at the time of publication but takes no responsibility for any error, omission or defect therein.To the extent permitted by law DET, its employees, agents and consultants exclude all liability for any loss or damage (including indirect, special or consequential loss or damage) arising from the use of, or reliance on the information contained herein, whether caused or not by any negligent act or omission. If any law prohibits the exclusion of such liability, DET limits its liability to the extent permitted by law, for the resupply of the information.

Third party sitesThis resource may contain links to third party websites and resources. DET is not responsible for the condition or content of these sites or resources as they are not under its control.Third party material linked from this resource is subject to the copyright conditions of the third party. Users will need to consult the copyright notice of the third party sites for conditions of usage.

RII Resources and Infrastrucure Industry- February 2016Page 2 of 51

http://creativecommons.org/licenses/by-nd/3.0/au/

Victorian Purchasing Guide - Version History

Training Package Version

Date VPGReleased

Comments

RII Resources and Infrastructure Industry Training PackageRelease 2

5 April 2016

RII Release 2 contains:- One (1) new qualification

RII21315 Certificate II in Cross Industry Operations- Six (6) new units of competency- Fifty one (51) revised units of competency

RII Release 1.4 8 February 2015

ISC Upgrades

RII Release 1.3 Not Published

ISC upgrades


ISC upgrades


ISC upgrades

RII Resources and Infrastructure Industry

Not Published

This Victorian Purchasing Guide reflects the initial release of the RII Resources and Infrastructure Industry Training Package (Release 1.0)


RII Resources and Infrastructure Industry Training Package Victorian Purchasing Guide

CONTENTS

INTRODUCTION 5What is a Victorian Purchasing Guide? 5

Victorian Government subsidised training 5

QUALIFICATIONS 6

UNITS OF COMPETENCY 8

CONTACTS AND LINKS 49

GLOSSARY 52


INTRODUCTION

What is a Victorian Purchasing Guide?

The Victorian Purchasing Guide (VPG) provides information for use by Registered Training Organisations (RTOs) in the provision of Victorian government subsidised training.

Specifically, the VPG provides the following information related to the delivery of nationally endorsed Training Packages in Victoria:

maximum and minimum payable hours available for each qualification. nominal hours for each unit of competency within the Training Package.

They also contain sample training programs which reflect a vocational outcome for the particular qualification it has been developed for.

Victorian Government subsidised training

To deliver government subsidised training in Victoria, an RTO must have an approved VET funding contract with the Department of Education and Training (DET).

The VET funding contract and related guidelines set out the requirements that RTOs must abide by to maintain compliance as contracted providers in receipt of government subsidy. The contract and guidelines set standards of behaviour, as well as prescribing minimum requirements with regard to provider practice in the delivery of training services.

For further information relating to obtaining a VET funding contract, please visit the Skills Victoria Training System (SVTS) website: http://www.education.vic.gov.au/svts


http://www.education.vic.gov.au/svts

QUALIFICATIONS

Code Title Minimum Payable Hours

Maximum Payable Hours

RII10115 Certificate I in Resources and Infrastructure Operations 135 140

RII20115 Certificate II in Resources and Infrastructure Work Preparation 285 300

RII20215 Certificate II in Surface Extraction Operations 255 270

RII20315 Certificate II in Underground Coal Mining 305 320

RII20415 Certificate II in Underground Metalliferous Mining 380 400

RII20515 Certificate II in Resource Processing 325 340

RII20615 Certificate II in Mining Field/Exploration Operations 455 480

RII20715 Certificate II in Civil Construction 495 520

RII20815 Certificate II in Bituminous Surfacing 415 435

RII20915 Certificate II in Drilling Operations 375 395

RII21015 Certificate II in Drilling Oil/Gas (Off shore) 375 395

RII21115 Certificate II in Drilling Oil/Gas (On shore) 350 370

RII21215 Certificate II in Well Servicing Operations 325 340

RII21315 Certificate II in Cross Industry Operations 325 340

RII30115 Certificate III in Surface Extraction Operations 570 600

RII30215 Certificate III in Underground Coal Operations 620 650

RII30315 Certificate III in Underground Metalliferous Mining 640 670

RII30415 Certificate III in Resource Processing 430 450

RII30515 Certificate III in Mining Exploration 540 570

RII30615 Certificate III in Small Mining Operations 475 500

RII30715 Certificate III in Mine Emergency Response and Rescue 470 495

RII30815 Certificate III in Civil Construction Plant Operations 1170 1230

RII30915 Certificate III in Civil Construction 1340 1410

RII31215 Certificate III in Civil Foundations 760 800

RII31615 Certificate III in Trenchless Technology 810 850

RII31815 Certificate III in Drilling Operations 530 555

RII31915 Certificate III in Drilling Oil/Gas (Off shore) 430 450

RII32015 Certificate III in Drilling Oil/Gas (On shore) 390 410

RII32215 Certificate III in Well Servicing Operations 430 450

RII40115 Certificate IV in Surface Extraction Operations 820 860


Code Title Minimum Payable Hours

Maximum Payable Hours

RII40215 Certificate IV in Surface Coal Mining (Open Cut Examiner) 630 660

RII40315 Certificate IV in Metalliferous Mining Operations (Underground) 715 750

RII40415 Certificate IV in Underground Coal Operations 740 780

RII40515 Certificate IV in Resource Processing 540 570

RII40615 Certificate IV in Civil Construction Operations 810 850

RII40715 Certificate IV in Civil Construction Supervision 820 860

RII40815 Certificate IV in Civil Construction Design 830 870

RII40915 Certificate IV in Drilling Operations 510 535

RII41015 Certificate IV in Drilling Oil/Gas (Off shore) 520 545

RII41115 Certificate IV in Drilling Oil/Gas (On shore) 415 435

RII41215 Certificate IV in Well Servicing Operations 500 525

RII50115 Diploma of Surface Operation Management 930 980

RII50215 Diploma of Underground Metalliferous Mining Management 750 790

RII50315 Diploma of Minerals Processing 855 900

RII50415 Diploma of Civil Construction Management 970 1020

RII50515 Diploma of Civil Construction Design 1570 1650

RII50615 Diploma of Drilling Operations 760 800

RII50715 Diploma of Drilling Oil/Gas (Off shore) 1150 1210

RII50815 Diploma of Drilling Oil/Gas (On shore) 610 640

RII50915 Diploma of Underground Coal Mining Management 705 740

RII51015 Diploma of Well Servicing Operations 850 895

RII60115 Advanced Diploma of Metalliferous Mining 1400 1470

RII60215 Advanced Diploma of Extractive Industries Management 1310 1380

RII60315 Advanced Diploma of Underground Coal Mining Management 950 1000

RII60415 Advanced Diploma of Drilling Management 805 845

RII60515 Advanced Diploma of Civil Construction Design 1010 1060

RII60615 Advanced Diploma of Civil Construction 1330 1400

RII60715 Advanced Diploma of Surface Coal Mining Management 1290 1360


UNITS OF COMPETENCY

Unit Code Unit Title Nominal Hours

RIIBEF201D Plan and organise work 20RIIBEF202D Identify and rectify site operating problems 40RIIBEF301D Run on-site operations 40RIIBEF302D Monitor site production activities 20RIIBEF401D Manage non-routine, complex technical situations 80RIIBEF402D Supervise on-site operations 50RIIBEF601D Conduct business negotiations 100RIIBEF602D Establish and evaluate operational performance

management systems120

RIIBEF603D Manage decision making process 120RIIBEF604D Conduct feasibility study 100RIIBEF605D Resource site plans and objectives 120RIIBHD301D Conduct surface blast hole drilling operations 60RIIBHD302D Conduct underground development drilling 28RIIBHD303D Conduct long hole drilling 28RIIBHD304D Set-up and prepare for open cut drilling operations 40RIIBHD305D Conduct down-hole hammer drilling 40RIIBHD401D Supervise blast hole drilling operations 40RIIBHD501D Manage blast hole drilling operations 50RIIBLA201D Support shotfiring operations 30RIIBLA202E Support underground shotfiring operations 20RIIBLA203D Conduct mobile mixing of explosives 30RIIBLA204D Store, handle and transport explosives in underground coal

mines30

RIIBLA205D Store, handle and transport explosives 20RIIBLA301D Conduct surface shotfiring operations 50RIIBLA302D Conduct shotfiring operations in underground coal mines 60RIIBLA303D Conduct underground development shotfiring 50RIIBLA304D Conduct underground production shotfiring 50RIIBLA305D Conduct secondary blasting 35RIIBLA306D Conduct accretion firing 30RIIBLA307D Conduct blast survey 20RIIBLA308D Conduct electronic blasting operations 50RIIBLA401D Manage blasting operations 40RIIBLA402D Monitor and control the effects of blasting on the

environment40

RIIBLA601E Design blasts 40RIIBLA602D Establish and maintain a blasting system 120RIICAR301D Rehabilitate exploration site 40RIICAR302D Rehabilitate small mine site 40RIICAR401D Supervise rehabilitation operations 40RIICBM201D Strip pile heads 20



RIICBM301D Maintain concrete bridges 80RIICBM302D Install pre-cast girders 80RIICBM303D Install pre-cast parapets 80RIICBM304D Operate a bridge inspection unit 80RIICBM305D Install pre-cast concrete bridge decks 80RIICBM306D Undertake concreting work on concrete bridges 80RIICBM307D Construct formwork and false work on concrete bridges 120RIICBS201D Conduct tack coat spraying operations 20RIICBS202D Hand spread asphalt 18RIICBS203D Safely handle bituminous materials 18RIICBS204D Conduct aggregate spreader box operations 18RIICBS205D Roll aggregate in sprayed sealing operations 26RIICBS206D Conduct pavement sweeping operations 18RIICBS207D Take samples of materials used in road surfacing 10RIICBS208D Conduct road maintenance operations 36RIICBS301D Conduct profile planer operations 80RIICBS302D Conduct paver screeding operations 58RIICBS303D Conduct materials transfer vehicle operations 56RIICBS304D Compact asphalt with rollers 44RIICBS305D Conduct asphalt paver operations 52RIICBS306D Conduct slurry sealing operations 80RIICBS307D Conduct bitumen sprayer operations 100RIICBS308D Load aggregate using a purpose built loader 20RIICBS309D Conduct self-propelled aggregate spreader operations 30RIICBS310D Conduct patching operations 60RIICBS311D Produce asphalt products 100RIICBS312D Conduct bitumen tanker operations 64RIICBS401D Apply the principles of asphalt paving and compaction 40RIICBS402D Apply the principles for the application of bituminous sprayed

treatment45

RIICBS403D Apply the principles for the application of polymer modified binder

25

RIICBS404D Apply the principles for the selection and use of bituminous emulsion

20

RIICBS405D Apply the principles for the application of slurry surfacing 40RIICBS406D Apply the principles of pavement profiling using a profiler 30RIICBS407D Apply the principles for the manufacture and delivery of hot

mix asphalt40

RIICBS408D Apply the principles for the manufacture of cold mix 40RIICBS409D Apply the principles for the manufacture of polymer modified

binder40

RIICBS410D Apply the principles for the manufacture of bituminous emulsion

40

RIICBS411D Apply the principles for the manufacture of slurry surfacing 40RIICCM201D Carry out measurements and calculations 20



RIICCM202D Identify, locate and protect underground services 30RIICCM203D Read and interpret plans and specifications 40RIICCM204D Place and fix reinforcement materials 40RIICCM205E Carry out manual excavation 8RIICCM206D Support plant operations 8RIICCM207D Spread and compact materials manually 12RIICCM208D Carry out basic levelling 16RIICCM209D Carry out concrete work 40RIICCM210D Install trench support 16RIICCM211D Erect and dismantle temporary fencing and gates 40RIICCM301D Construct and dismantle fences and gates 40RIICCR401D Develop and maintain positive community relations 30RIICCR501D Conduct sales in construction materials operations 80RIICCR601D Manage customer relationships 60RIICFW301D Construct underpinning 60RIICFW302D Install temporary and permanent rock anchors 24RIICFW303D Install primary ground support 24RIICFW304D Conduct pile driving operations 40RIICFW305D Conduct cast in-situ pilings operations 40RIICFW306D Direct pile driving operations 40RIICFW307D Direct cast in-situ piling operations 40RIICOM201D Communicate in the workplace 20RIICOM301D Communicate information 30RIICOM302D Communicate workplace information 20RIICPL301D Install water mains pipelines 40RIICPL302D Install stormwater systems 40RIICPL303D Install sewer pipelines 40RIICPL304D Install pre-cast gully pits 40RIICPL305D Install pre-cast access chambers 40RIICPL401D Apply the principles for the installation of underground

service using open excavation60

RIICRC201D Repair potholes 36RIICRC202D Install signs 16RIICRC203D Install sub-soil drainage 20RIICRC204D Install and maintain roadside fixtures 30RIICRC205D Install utility poles 40RIICRC206D Install pre-cast concrete crash barriers 40RIICRC207D Install noise barriers 40RIICRC208D Lay pipes 40RIICRC209D Lay reinforced concrete box culverts 40RIICRC301D Maintain drainage systems 16RIICRC302D Place and form concrete kerb, channel and fixtures 36RIICRC303D Lay pavers 24



RIICRC304D Maintain sealed roads 32RIICRC305D Conduct road construction paver screeding operations 58RIICRC306D Conduct earthworks 80RIICRC307D Conduct road pavement construction 24RIICRC308D Conduct paver operations 80RIICRC309D Conduct stabiliser operations 80RIICRC310D Construct and maintain roads 60RIICRC311D Conduct concrete road paver operations 60RIICRC312D Setup and maintain concrete paver stringlines 40RIICRC313D Conduct concrete road curing and texturing operations 24RIICRC314D Handle concrete materials 24RIICRC315D Use concreting materials and equipment 60RIICRC316D Place and compact concrete 170RIICRC317D Finish concrete pavements 40RIICRC318D Cure Concrete 16RIICRC319D Saw and cut concrete pavements to initiate planned cracks 16RIICRC320D Seal concrete pavements 12RIICRC321D Use automated paving guidance systems 80RIICRC322D Receive, check and record concrete deliveries 8RIICRC323D Insert tie bars in fresh concrete 8RIICRC401D Apply the principles of flexible pavement construction 50RIICRC402D Apply the principles of rigid pavement construction 50RIICRC403D Apply the principles of the stabilisation of materials 50RIICRC404D Inspect and report on pavement condition 40RIICRC405D Carry out pavement condition measurement 50RIICRC406D Apply the principles of pavement maintenance 50RIICRM201E Escort mobile works 24RIICRM202D Handle and store road marking materials 8RIICRM203D Conduct pedestrian road marking operations 24RIICRM204D Prepare surface for road marking 16RIICRM205D Conduct road marking measuring operations 16RIICRM206D Conduct airless and atomised spraying operations 20RIICRM207D Install raised pavement markers 16RIICRM301D Conduct ride on road marking operations 16RIICRM302D Conduct long line road marking operations 40RIICRM303D Conduct thermo plastic road marking operations 30RIICSG401D Apply the principles of civil concrete structures construction 100RIICSG402D Apply the principles of civil steel structures construction 100RIICSG403D Apply the principles of civil timber structures construction 100RIICSG404D Apply the principles of civil masonry, crib and gabion

structure construction100

RIICSG405D Carry out inspections of civil structures 100RIICSG406D Apply principles of maintenance of civil structures 100



RIICTB201D Maintain timber bridges 64RIICTB202D Apply bridge durability treatment 40RIICTB203D Produce drawings and sketches 24RIICTB301D Undertake visual inspection 64RIICTB302D Install temporary support members 40RIICTB303D Erect a temporary modular support system (bailey) on an

existing bridge48

RIICTB304D Install or replace sub-structure members 48RIICTB305D Install or replace super-structure members 48RIICTB306D Splice and connect timber members 40RIICTB307D Assemble a temporary modular bridge 48RIICTB308D Install or replace truss members 40RIICTB309D Construct, maintain and remove coffer dams 60RIICTB310D Construct specialised timber deck systems 64RIICTC301D Install tunnelling constructions services 80RIICTC302D Line tunnel 80RIICTC303D Excavate tunnel by machine 32RIICTC304D Muck out tunnel earthworks 16RIICTC305D Construct portals 24RIICTC401D Apply the principles of tunnel construction 100RIICTT301D Conduct fluid assisted directional boring 80RIICTT302D Conduct impact moling, ramming and augering 80RIICTT303D Control micro tunnelling and pipe-jacking 80RIICTT304D Undertake on-line replacement for existing pipeline systems 80RIICTT305D Undertake localised repair and sealing of existing pipeline

systems80

RIICTT306D Install cure in-place linings for existing pipeline systems 80RIICTT307D Spray linings for existing pipeline systems 80RIICTT308D Install close-fit linings for existing pipeline systems 80RIICTT309D Install slip lining in existing pipeline systems 80RIICTT310D Renovate large diameter pipes and chambers 80RIICTT401D Apply the principles for the installation of underground

services using trenchless technology60

RIICTT402D Apply the principles for the repair and rehabilitation of underground services using trenchless technology

60

RIICWD501D Prepare detailed design of foundations 100RIICWD502D Prepare detailed design of lighting 100RIICWD503D Prepare work zone traffic management plan 50RIICWD504D Prepare detailed design of environmental controls 100RIICWD505D Prepare detailed design of landscaping 100RIICWD506D Prepare detailed design of canals 100RIICWD507D Prepare detailed geotechnical design 100RIICWD508D Prepare detailed design of rural roads 100RIICWD509D Prepare detailed design of urban roads 100



RIICWD510D Prepare detailed design of busways 100RIICWD511D Prepare detailed design of sub-divisions 100RIICWD512D Prepare detailed design of motorways and interchanges 100RIICWD513D Prepare detailed design of rail civil infrastructure 100RIICWD514D Prepare detailed design of dams 100RIICWD515D Prepare detailed design of airfield civil works 100RIICWD516D Prepare detailed design of bicycle ways 50RIICWD517D Prepare detailed design of industrial hardstands 100RIICWD518D Prepare detailed design of open car parks 50RIICWD519D Prepare detailed design of inter modal facilities civil works 100RIICWD520D Prepare detailed design of rigid pavements 100RIICWD521D Prepare detailed design of flexible pavements 100RIICWD522D Prepare stabilised material mix design 100RIICWD523D Prepare asphalt mix design 60RIICWD524D Prepare design of sprayed seal surfacing 60RIICWD525D Select pavement surfacing 60RIICWD526D Prepare detailed traffic analysis 100RIICWD527D Prepare detailed design of traffic signals 100RIICWD528D Prepare detailed design of traffic management systems 100RIICWD529D Prepare detailed design of underground services 100RIICWD530D Prepare detailed design of surface drainage 100RIICWD531D Prepare detailed design of subsurface drainage 100RIICWD532D Prepare detailed design of tunnels 100RIICWD533D Prepare detailed design of civil concrete structures 100RIICWD534D Prepare detailed design of civil steel structures 100RIICWD535D Prepare detailed design of civil timber structures 100RIICWD536D Prepare detailed design of civil masonry, crib and gabion

structures100

RIICWD537D Prepare detailed design of marine structures civil works 120RIICWD601D Manage the civil works design process 300RIICWM401D Supervise civil works 80RIICWM402D Supervise civil works contractors 100RIICWM501D Implement civil construction plan 120RIICWM502D Implement civil works maintenance program 120RIICWM503D Prepare civil works cost estimate 100RIICWM504D Prepare civil works bill of quantities 100RIICWM505D Prepare civil works schedule of rates 100RIICWM601D Establish civil constructions plans 300RIICWM602D Establish civil works maintenance programs 300RIIDES301D Inspect, test and maintain diesel engine systems and their

ancillary systems80

RIIDES302D Inspect, test and maintain joints on diesel engine systems 40RIIDES303D Inspect, test and maintain cooling systems on diesel engine

systems20



RIIDES304D Inspect, test and maintain inlet systems on diesel engine systems

20

RIIDES305D Inspect, test and maintain exhaust systems on diesel engine systems

20

RIIDES306D Inspect, test and maintain safety shutdown systems on diesel engine systems

40

RIIDES307D Test, determine the cause and rectify excessive emission levels on diesel engine systems

20

RIIDML401D Apply the principles of demolitions 100RIIEGS201D Operate in isolated and remote situations 40RIIEGS202D Conduct field work 40RIIEGS301D Operate and maintain instruments and field equipment 40RIIEGS302D Plan and undertake field trip 40RIIEGS303D Provide geological field assistance 40RIIEGS304D Mobilise equipment and materials 40RIIEGS305D Navigate in remote or trackless areas 40RIIEGS306D Prepare drill site 40RIIENV201D Identify and assess environmental and heritage concerns 20RIIENV202D Suppress airborne contaminants 30RIIENV301D Conduct atmospheric monitoring 40RIIENV302D Apply environmentally sustainable work practices 30RIIENV401D Supervise dust and noise control 40RIIENV402D Implement and monitor environmental policies 40RIIENV501D Implement and maintain environmental management plan 120RIIENV502D Undertake process or project environmental impact

assessment120

RIIENV601D Establish and maintain the environmental management system

100

RIIERR201D Conduct fire team operations 40RIIERR202E Contribute to the control of emergencies and critical

situations30

RIIERR203D Escape from hazardous situation unaided 40RIIERR204D Provide aided rescue to endangered personnel 40RIIERR205D Apply initial response First Aid 20RIIERR301D Respond to mine incident 20RIIERR302D Respond to local emergencies and incidents 20RIIERR303D Operate in self-contained regenerative oxygen breathing

apparatus20

RIIERR304D Control emergencies and critical situations 30RIIERR305D Control underground fires 30RIIERR306D Conduct underground search 20RIIERR307D Extricate casualties from underground incident 30RIIERR308D Extricate and transport people involved in incidents 40RIIERR309D Establish and operate from fresh air base 20RIIERR310D Provide support for rescue operations 20RIIERR311D Assess and implement life support systems and stabilise 40



casualtiesRIIERR401D Apply and monitor surface operations emergency

preparedness and response systems60

RIIERR402D Apply and monitor underground coal mine emergency preparedness and response systems

60

RIIERR403D Lead rescue team 40RIIERR404D Apply and monitor underground Metalliferous mine

emergency preparedness and response systems60

RIIERR501D Implement underground coal mine emergency preparedness and response systems

60

RIIERR503D Implement emergency preparedness and response systems 70RIIERR504D Manage major incidents and emergencies 120RIIERR601D Establish and maintain mine emergency preparedness and

response systems120

RIIERR602D Establish and maintain underground coal mine emergency preparedness and response systems

80

RIIFIA401D Manage financial records 50RIIGOV201D Comply with site work processes/procedures 20RIIGOV401D Apply, monitor and report on compliance systems 80RIIGOV501D Identify, implement and maintain legal compliance

requirements80

RIIGOV601D Establish, maintain and develop a statutory compliance management system

120

RIIHAN201D Operate a forklift 40RIIHAN202D Handle and store cargo 20RIIHAN203D Conduct lifting operations 40RIIHAN204D Load and unload cargo/goods 20RIIHAN205D Secure cargo 12RIIHAN206D Transport plant, equipment and personnel 30RIIHAN207D Operate personnel and materials hoists 30RIIHAN208D Perform dogging 80RIIHAN209D Perform basic rigging 40RIIHAN210D Perform intermediate rigging operations 40RIIHAN211D Conduct basic scaffolding operations 56RIIHAN212D Conduct non-slewing crane operations 40RIIHAN213D Work effectively in the drilling Industry 50RIIHAN301D Operate elevating work platform 40RIIHAN302D Conduct intermediate scaffolding operations 40RIIHAN304D Conduct slewing crane operations 80RIIHAN305D Operate a gantry or overhead crane 40RIIHAN306D Carry out lifting using multiple cranes 40RIIHAN307D Operate a vehicle loading crane 40RIIHAN308E Load and unload plant 20RIIHAN309E Conduct telescopic materials handler operations 80RIIHAN310D Conduct crane operations underground 40RIIHAN311E Conduct operations with integrated tool carrier 80



RIIHAN401D Organise and monitor wharf/terminal operations 24RIIHAN402D Process movement of containers and cargo 28RIIIMG301D Maintain site records 10RIILAT401D Provide leadership in the supervision of Indigenous

employees50

RIILAT402D Provide leadership in the supervision of diverse work teams 50RIILAT601D Manage group processes 120RIIMCO201D Conduct spreader operations 60RIIMCO202D Conduct mobile slew conveyor operations 40RIIMCO301D Conduct control centre operations 60RIIMCO302D Conduct surface miner operations 60RIIMCO303D Conduct auger miner operations 80RIIMCP202D Conduct rail dispatch operations 40RIIMCP301D Monitor plant operations for coal preparation 60RIIMCU201D Operate power tram 40RIIMCU202D Conduct tracked vehicle/plant operations 40RIIMCU203D Conduct wheeled vehicle operations (non-articulated) 40RIIMCU204D Conduct wheeled vehicle operations (articulated) 40RIIMCU205D Conduct rotational drilling 40RIIMCU206D Install, maintain and recover gas drainage systems 40RIIMCU207D Install, maintain and recover electrical services 20RIIMCU208D Conduct basic strata control operations 40RIIMCU209D Conduct roadway maintenance 20RIIMCU210D Conduct stonedusting operations 20RIIMCU211D Install and maintain explosion barriers 20RIIMCU212E Construct and maintain basic ventilation devices 20RIIMCU213D Conduct feeder breaker operations 40RIIMCU214D Conduct face ventilation operations 40RIIMCU215D Operate longwall ancillary equipment 40RIIMCU216D Maintain lamp cabin operations 40RIIMCU301D Conduct specialised strata control operations 40RIIMCU302E Construct and maintain ventilation devices 40RIIMCU303D Conduct continuous miner operations 120RIIMCU304D Conduct shuttle car operations 40RIIMCU305D Conduct outburst mining operations 40RIIMCU306D Conduct shearer operations 40RIIMCU307D Conduct longwall face equipment operations 120RIIMCU308D Install and recover longwall equipment 40RIIMCU309D Operate breaker line supports 40RIIMCU310D Conduct flexible conveyor train (FCT) operations 40RIIMCU311D Monitor control processes 40RIIMCU401D Conduct special roadway operations 60RIIMCU402D Apply spontaneous combustion management measures 40



RIIMCU403D Apply and monitor the gas management plan 60RIIMCU404E Apply and monitor the gas drainage management plan 60RIIMCU405D Apply and monitor the outburst management plan 60RIIMCU406D Apply and monitor the inrush management plan 70RIIMCU407D Apply and monitor the strata management plan 60RIIMCU408D Apply the spontaneous combustion management plan 60RIIMCU501D Implement the spontaneous combustion management plan 60RIIMCU502D Implement the gas management plan 60RIIMCU503D Implement the gas drainage management plan 60RIIMCU504D Implement the outburst management plan 60RIIMCU505D Implement the inrush management plan 80RIIMCU506D Implement strata management plan 60RIIMCU601D Establish and maintain the spontaneous combustion

management plan80

RIIMCU602D Establish and maintain the gas management system 80RIIMCU603D Establish and maintain the gas drainage management plan 80RIIMCU604D Establish and maintain the outburst management plan 80RIIMCU605D Establish and maintain the inrush management plan 100RIIMCU606D Establish and maintain the mining method and strata

management systems80

RIIMEX201D Suppress dust in open-cut environment 30RIIMEX202D Install open-cut mine ground support 25RIIMEX203D Break oversize rock 32RIIMEX204D Conduct workboat/barge operations 30RIIMEX301D Conduct Dredging Operations 40RIIMEX302D Assess ground conditions 20RIIMEX401D Apply pit plan 190RIIMEX402D Supervise dredging operations 40RIIMEX403D Apply the principles of canal construction 100RIIMEX404D Apply and monitor systems for stable mining 80RIIMEX405D Apply and monitor systems and methods of surface coal

mining80

RIIMEX406D Apply and monitor mine transport system and production equipment

60

RIIMEX501D Implement pit plan 90RIIMEX502D Implement systems and methods of mining 70RIIMEX503D Manage dredging operations 60RIIMEX601D Plan pit development 120RIIMEX602D Establish and maintain surface mining ground control and

slope stability systems120

RIIMEX603D Establish and maintain underground mining ground control and stable mining systems

120

RIIMEX604D Establish and maintain surface product haulage and transport systems

120

RIIMEX605D Establish, implement and maintain operational management plans

120



RIIMPG201D Connect and disconnect reefer refrigeration units 20

RIIMPG301D Control and monitor automated plant/machinery 40RIIMPO201D Operate roller/compactor underground 24RIIMPO202D Undertake towing underground 20RIIMPO203D Support bucket wheel system operations 60RIIMPO204D Conduct conveyor shifting dozer operations 40RIIMPO205D Operate roller/compactor 20RIIMPO206D Conduct bulk water truck operations 30RIIMPO208E Operate support equipment 60RIIMPO210D Conduct underground truck operations 24RIIMPO301D Conduct hydraulic excavator operations 40RIIMPO302D Conduct hydraulic shovel operations 45RIIMPO303D Conduct rope shovel operations 50RIIMPO304D Conduct wheel loader operations 40RIIMPO305E Conduct coal stockpile dozer operations 40RIIMPO306D Operate plant/machinery on live stockpiles 30RIIMPO307D Conduct wheel grader operations in underground mines 60RIIMPO308E Conduct tracked dozer operations 40RIIMPO309E Conduct wheeled dozer operations 40RIIMPO310E Conduct grader operations 40RIIMPO312D Conduct scraper operations 40RIIMPO313D Conduct face loader operations 40RIIMPO314D Operate small open cut mine equipment 30RIIMPO315D Conduct tractor operations 60RIIMPO316D Conduct self propelled compactor operations 40RIIMPO317E Conduct roller operations 80RIIMPO318E Conduct civil construction skid steer loader operations 80RIIMPO319D Conduct backhoe/loader operations 200RIIMPO320E Conduct civil construction excavator operations 200RIIMPO321E Conduct civil construction wheeled front end loader

operations160

RIIMPO322D Conduct civil construction tracked front end loader operations

80

RIIMPO323D Conduct civil construction dozer operations 240RIIMPO324E Conduct civil construction grader operations 240RIIMPO325D Conduct civil construction scraper operations 160RIIMPO326D Conduct civil construction water cart operations 40RIIMPO327D Conduct pipe layer operations 80RIIMPO328D Conduct continuous bucket trencher operations 40RIIMPO329D Conduct dragline operations 120RIIMPO330D Conduct bucket-wheel operations 80RIIMPO331D Conduct operations with stockpile dozer 40



RIIMPO333D Conduct underground load, haul and dump truck operations 80RIIMPO334D Conduct skid steer loader operations with attachments 80RIIMPO335D Conduct skid steer loader operations without attachments 60RIIMPO336D Conduct belly dump truck operations 40RIIMPO337D Conduct articulated haul truck operations 40RIIMPO338D Conduct rigid haul truck operations 40RIIMPO401D Supervise mobile plant operations 40RIIMPO402D Apply the principles of earthworks construction 100RIIMPO403D Monitor interaction of heavy and light vehicles and mining

equipment60

RIIMPO501D Implement, monitor, rectify and report on mobile plant and equipment systems

80

RIIMPO502D Manage the interaction of heavy and light vehicles and mining equipment

100

RIIMPO503D Manage laser levelling of operating plant 80RIIMSM301D Establish a mining claim 30RIIMSM302D Plan small mine operations 40RIIMSM303D Install underground shaft 40RIIMSM304D Inspect small mines operations 30RIIMSM305D Conduct materials extraction operations underground 40RIIMSM306D Design and maintain pillar system and ground control 40RIIMSM307D Install and maintain ventilation systems and equipment 40RIINHB201D Load, secure and unload drilling equipment and materials 40RIINHB202D Set up/pack up drill site 40RIINHB203D Support drilling process 60RIINHB205E Assist continuous flight auger drilling 40RIINHB206E Assist large diameter auger drilling 40RIINHB208D Assist diamond core drilling 40

RIINHB209D Assist guided boring 40RIINHB210D Assist surface directional drilling 40RIINHB211D Assist mud rotary drilling 40RIINHB213D Assist cable tool drilling 45RIINHB216D Assist underground in-seam directional drilling 40RIINHB217D Assist horizontal direction drilling 40RIINHB218D Assist grouting or cementing operations 40RIINHB219D Assist with air drilling 40RIINHB301D Set up and prepare for drilling operations 65RIINHB302D Conduct reaming 65RIINHB303D Install product pipe 40RIINHB304D Conduct air drilling 65RIINHB305E Conduct continuous flight auger drilling 65RIINHB306E Conduct large diameter auger drilling 65RIINHB307D Conduct conventional core drilling 65RIINHB308D Conduct wireline core drilling 65



RIINHB309E Conduct guided boring 65RIINHB310D Conduct surface directional drilling 65RIINHB311D Conduct mud rotary drilling 65RIINHB312D Conduct raise boring 65RIINHB313D Conduct cable tool drilling 65RIINHB315D Conduct top-hole hammer drilling 65RIINHB316D Conduct underground in-seam directional drilling 40RIINHB317D Install underground in-seam directional drilling standpipes 40RIINHB318D Install and operate water and gas control equipment 40RIINHB319D Install de-watering conduit and gas drainage equipment 40RIINHB320D Construct monitoring bores 65RIINHB322D Construct multiple aquifer production bores 65RIINHB323D Conduct horizontal directional drilling 65RIINHB324D Carry out grouting or cementing operations 40RIINHB325D Construct and complete single aquifer production bores 70RIINHB401D Plan and supervise the mobilisation of equipment, crew and

materials50

RIINHB402D Supervise mineral exploration drilling operations 50RIINHB403D Supervise geotechnical drilling operations 50RIINHB404D Supervise seismic drilling operations 50RIINHB405E Supervise water well drilling operations 50RIINHB406D Supervise foundation drilling operations 50RIINHB407D Supervise horizontal directional drilling operations 50RIINHB408D Supervise environmental drilling operations 50RIINHB409D Supervise mineral production and development drilling

operations50

RIINHB410D Supervise surface directional drilling operations 50RIINHB411D Construct artesian (flowing) aquifer production bores 65RIINHB412D Construct geothermal wells 65RIINHB413D Supervise underground in-seam directional drilling

operations65

RIINHB501E Plan drilling 60RIIOGD201D Assist in maintaining rig safety and emergency procedures 40RIIOGD202D Carry out equipment and basic rig maintenance 40RIIOGD203E Prepare and operate drilling fluid systems 30RIIOGD204E Perform rig floor operations 50RIIOGD205D Support blow out prevention operations 20RIIOGD206D Assist with coal seam gas control 20RIIOGD209E Operate and maintain ancillary equipment 40RIIOGD301E Conduct and maintain derrick operations 50RIIOGD302E Trip casing 30RIIOGD303E Trip pipe 30RIIOGD304D Apply effective coal seam gas control practices 40RIIOGD305D Apply blow out prevention operational procedures 40



RIIOGD401D Rig up, conduct pre-spud operations and rig down 30RIIOGD402D Participate in nippling-up and pressure test 30RIIOGD403D Conduct drilling operations 30RIIOGD404D Coordinate air drilling operations 30RIIOGD405D Carry out well control and blow out prevention 65RIIOGD406D Shut down rig 30RIIOGD501E Manage rig operations 40RIIOGD502D Plan and evaluate rig operations 40RIIOGD503D Oversee drilling operations 80RIIOGD504D Manage drilling operations 80RIIOGD505D Manage drilling induction and orientation 50RIIOGD506D Manage rig move and camp move 50RIIOGD507D Manage and monitor rig-up and rig-up to spud operations 50RIIOGD508D Manage well completion and abandonment 50RIIOGD601D Manage multiple drilling operations 80RIIOGF201D Carry out deck operations 20RIIOGF202D Assist in the transfer of passengers and freight during

helicopter operations20

RIIOGF203D Contribute to the control of offshore emergencies 20RIIOGF301D Monitor, operate and maintain mud pits and equipment 30RIIOGF302D Operate drilling fluids and mud pits 40RIIOGN201E Carry out rig lease operations 30RIIOGN302E Operate mud pumps 20RIIOGN303D Operate mud systems 40RIIPBE201D Conduct aeration process 28RIIPBE202D Conduct digestion process 32RIIPBE203D Conduct precipitation operations 32RIIPBE204D Conduct reduction process 32RIIPBE205D Conduct roasting operations 32RIIPBE301D Conduct calcinations activities 26RIIPBE302D Conduct bacterial oxidation 32RIIPBE303D Conduct filtering process 26RIIPBE304D Conduct heavy media separation 32RIIPBE305D Conduct high tension separation 28RIIPBE306D Conduct leaching process 32RIIPBE307D Conduct pressure oxidation 32RIIPBE308D Conduct thickening and clarifying process 24RIIPBE309D Conduct wet gravity separation 28RIIPBE310D Conduct flotation process 38RIIPBE311D Conduct magnetic separation 28RIIPBP202D Conduct air cleaning activities 32RIIPBP301D Process lime products 32RIIPBP302D Control operations in acid plant 40



RIIPEO201D Conduct conveyor operations 40RIIPEO202D Provide deck support for conveyor-car high wall mining

operations40

RIIPEO203D Conduct stacker operations 30RIIPEO204D Conduct shore side mooring operations 30RIIPEO205D Conduct ship loading operations 30RIIPEO206D Lay and recover cables and hoses 20RIIPEO207D Coordinate conveyor system shift 20RIIPEO208D Extend, retract and maintain conveyor componentry 20RIIPEO301D Conduct conveyor-car high wall mining operations 40RIIPEO302D Operate and monitor ore car dumpers 40RIIPGP201D Conduct pump operations 16RIIPGP202D Handle reagents 28RIIPGP203D Operate compressors 24RIIPGP204D Carry out bore-field operations 30RIIPGP205D Handle, store and use cyanide 30RIIPGP301D Conduct drying activities 26RIIPGP302D Monitor and operate auxiliary plant and equipment 40RIIPHA201D Operate raw material feed systems 20RIIPHA301D Conduct milling/grinding 32RIIPHA302D Operate and monitor filter processes 24RIIPHA303D Operate agglomeration circuit 32RIIPRE201D Conduct solvent extraction 36RIIPRE202D Prepare and carry out electrolytic cleaning process 26RIIPRE203D Prepare for sintering activities 14RIIPRE204D Sinter materials 14RIIPRE301D Conduct electrowinning/electro-refining operations 36RIIPRE302D Conduct elution processes 32RIIPRE303D Conduct gold room operations 40RIIPRE304D Monitor casting quality 24RIIPRM501D Implement, monitor, rectify and report on contracts 80RIIPRO201D Conduct crushing operations 30RIIPRO202D Conduct screening and conveying operations 30RIIPRO203D Operate programmable logic control systems 30RIIPRO204D Bulk package and store product 20RIIPRO205D Conduct blending plant operations 30RIIPRO301D Conduct crushing and screening plant operations 50RIIPRO302D Perform process control room operations 50RIIPRO303D Conduct sand wash plant operations 30RIIPRO401D Supervise processing operations 60RIIPRO402D Supervise recycled materials operations 40RIIPRO501D Implement site processing plant operations 40RIIPRO502D Develop, implement and maintain process control systems 40



RIIPRO601D Design processing plant 150RIIPSM201D Tap furnaces 24RIIPSM202D Prepare for pelletising activities 14RIIPSM203D Produce pellets 14RIIPSM301D Cast a blast furnace 34RIIPSM302D Cast ingots 20RIIPSM303D Operate a blast furnace 70RIIPSM304D Operate furnaces 32RIIPSM305D Operate converters 32RIIPSM306D Supply molten metal and additives to furnaces 28RIIPSM307D Control molten metal in holding furnace/vessel 32RIIPSM308D Monitor and maintain furnace gas efficiency 32RIIPSM309D Monitor and maintain flue gas efficiency 32RIIQUA201D Maintain and monitor site quality standards 20RIIQUA401D Apply a quality management system on site 60RIIQUA501D Implement, monitor and develop quality management plans 100RIIQUA601D Establish and maintain a quality system 100RIIRAI401D Apply and monitor mine services and infrastructure systems 60RIIRAI402D Apply and monitor site plant and resource management plan 60RIIRAI501D Implement mine transport systems and production

equipment60

RIIRAI502D Implement site plant and resource management plan 70RIIRAI503D Implement site services and infrastructure systems 70RIIRAI504D Select and install surface plant and equipment 70RIIRAI505D Implement the surface mine mechanical plant management

plan100

RIIRAI506D Implement, monitor, rectify and report on inventory control system

80

RIIRAI507D Implement the underground coal mine mechanical plant management plan

80

RIIRAI508D Implement mine services systems 80RIIRAI509D Implement mine fixed plant and infrastructure systems 80RIIRAI510D Implement, monitor, rectify and report on interfaces between

electrical and mechanical componentry80

RIIRAI601D Establish and maintain the site infrastructure and fixed plant systems

120

RIIRAI602D Establish and maintain mine mechanical plant, services and infrastructure systems

120

RIIRAI603D Establish and maintain mine transport systems and production equipment

80

RIIRAI604D Establish and maintain mine services and infrastructure systems

80

RIIRAI605D Establish and maintain an underground mine mechanical plant management system

100

RIIRAI606D Establish and maintain mine closure management systems 120RIIRAI607D Establish quarry operations 100



RIIRAI608D Establish quarry development 180RIIRAI609D Establish and maintain electrical installations, reticulation

and protection system120

RIIRAI610D Establish and maintain mechanical standard and engineering practices for transport and production equipment

120

RIIRAI611D Establish and maintain a surface mine mechanical plant management system

100

RIIRAI612D Establish and maintain underground product haulage and transport systems

120

RIIRIS201D Conduct local risk control 20RIIRIS202D Respond to site based spills 20RIIRIS301D Apply risk management processes 40RIIRIS401D Apply site risk management system 40RIIRIS402D Carry out the risk management processes 60RIIRIS403D Manage and coordinate spill response 50RIIRIS501D Implement and maintain management system to control risk 80RIIRIS601D Establish and maintain the risk management system 100RIIRTM201D Position and set-up a variable message sign 40RIIRTM202D Position and set-up portable traffic signals 40RIIRTM203D Work as a safety observer spotter 20RIIRTM301D Operate a truck or trailer mounted attenuator 40RIISAM201D Handle resources and infrastructure materials and safely

dispose of nontoxic materials16

RIISAM202D Isolate and access plant 30RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIISAM205D Cut, weld and bend materials 40RIISAM207D Apply operational maintenance skills 40RIISAM208D Perform plant operational maintenance 50RIISAM209D Carry out operational maintenance 40RIISAM210D Remove and fit wheel assemblies 40RIISAM211D Remove, repair and refit tyres and tubes 40RIISAM212D Service mine plant and equipment 40RIISAM213D Position and set up mobile lighting 10RIISAM214D Provide support to electrical tradesperson 40RIISAM215D Carry out drilling Industry operational maintenance 40RIISAM301E Test operational functions of vehicles and equipment 30RIISAM302D Service and handover plant and machines 30RIISAM303D Shut down dredge for operator maintenance 40RIISAM304D Install, commission and maintain major conveyor equipment

and systems80

RIISAM305D Repair and splice conveyor belting 40RIISAM306D Service and maintain conveyors, feeders and hoppers 40



RIISAM307D Service and maintain crushers 40RIISAM308D Service and maintain screens 40RIISAM309D Service and maintain pumps 40RIISAM310D Install and commission plant, machinery and services 40RIISAM311D Maintain winder equipment 40RIISAM312D Inspect and maintain shafts and structures 24RIISAM313D Monitor, inspect and service ropes and attachments 32RIISAM314D Manage oil and gas drilling equipment maintenance 40RIISAM401D Apply site plant, equipment and infrastructure maintenance

management plan40

RIISAM402D Supervise operation of electrical equipment and installations 40RIISAM403D Commission/recommission plant 66RIISAM501D Implement and maintain the site plant, equipment and

infrastructure maintenance plan60

RIISAM502D Manage general drilling equipment maintenance 60RIISAM601D Establish and maintain plant, equipment and infrastructure

maintenance system120

RIISAM602D Establish and maintain maintenance management system for mechanical plant and equipment

120

RIISDM501D Conduct mine surveying operations 80RIISRM301D Blend stockpile materials 20RIISRM302D Conduct stockpile reclaiming operations 40RIISRM303D Move and position materials to form stockpiles 24RIISRM304D Maintain stockpiles 20RIISRM401D Apply and monitor the site stockpile management plan 60RIISRM501D Implement the stockpile management plan 60RIISRM502D Design stockpile formations and reclaiming systems 40RIISRM601D Establish and maintain the stockpile management system 120RIISTD201D Read and interpret maps 40RIISTD202D Collect routine site samples 40RIISTD301D Take environmental samples and measurements 120RIISTD302D Process data and maintain accurate records 40RIIUMM201D Install ground support 30RIIUMM202D Install and maintain vent 24RIIUMM203D Prepare and perform manual scaling operations 14RIIUMM301D Conduct wet filling activities 16RIIUMM302D Install sets 32RIIUMM303D Conduct hand held mining 40RIIUMM304D Construct and maintain underground roads 40RIIUMM305D Install and remove a secondary fan 16RIIUMM306D Conduct mechanical scaling 22RIIUMM307D Maintain underground stockpiles 24RIIUND201D Install, maintain and recover reticulation systems 24RIIUND202D Operate from elevated work platform underground 30



RIIUND204D Refuel vehicles/machines underground 32RIIUND205D Respond to a workforce incident 32RIIUND206D Install hand held underground ground support 20RIIUND207D Conduct underground lifting operations 40RIIUND208D Conduct skip operations 24RIIUND209D Operate automated winder 24RIIUND301D Operate manual winder 32RIIUND302D Conduct cage operations 32RIIUND303D Operate winder for shaft sinking 32RIIUND304D Recover equipment 30RIIUND305D Recover underground equipment 40RIIUND306D Conduct line of sight remote operations 28RIIUND307D Conduct tele-remote operations 28RIIUND308D Conduct control room operations 40RIIUND309D Conduct mechanical underground ground support drilling

and installation40

RIIUND310D Apply shot-crete underground 40RIIUND401D Apply and monitor the ventilation management plan 60RIIUND501D Implement the ventilation management plan 70RIIUND601D Establish and maintain the ventilation management system 120RIIUND602D Establish and maintain mine services systems 120RIIUND603D Manage, operate and maintain the mine ventilation system 60RIIVEH201D Operate light vehicle 30RIIVEH202E Operate a medium vehicle 30RIIVEH203D Operate light vehicle underground 40RIIVEH301D Conduct rail haulage operations 40RIIVEH302D Operate multi-combination vehicle 40RIIVEH303E Drive heavy combination vehicle 40RIIVEH304D Conduct tip truck operations 60RIIVEH305E Operate and maintain a four wheel drive vehicle 40RIIVEH306D Operate mine service vehicle 20RIIVEH307E Operate heavy rigid vehicle 40RIIWBP201D Treat and dispose of rejects and tailings 30RIIWBP202D Distribute tailings 16RIIWBP203D Monitor tailings dam environment 16RIIWBP401D Apply and monitor site waste and by-products management

plan60

RIIWBP501D Implement site waste and by-product management plan 70RIIWBP502D Plan and monitor recycled material operations 40RIIWBP601D Establish and maintain waste and by-product management

system120

RIIWHS201D Work safely and follow WHS policies and procedures 20RIIWHS202D Enter and work in confined spaces 30RIIWHS203D Maintain amenities 20



RIIWHS204D Work safely at heights 20RIIWHS205D Control traffic with stop-slow bat 20RIIWHS301D Conduct safety and health investigations 30RIIWHS302D Implement traffic management plan 20RIIWHS401D Supervise work in confined spaces 60RIIWHS402D Examine and maintain mine safety 50RIIWHS403D Apply the mine work health and safety management plan 80RIIWHS404D Implement and monitor health and hygiene management

systems50

RIIWHS405D Maintain standard procedures and safe working practices 20RIIWHS601D Establish and maintain the WHS management system 120RIIWHS602D Incorporate health and hygiene factors into mine

management60

RIIWMG201D Conduct dewatering activities in surface operations 30RIIWMG202D Conduct dewatering operations in underground mining

operations30

RIIWMG203D Drain and dewater civil construction site 20RIIWMG301D Control construction site water table 24RIIWMG302D Reclaim and treat water 20RIIWMG401D Apply and monitor the site water management plan 60RIIWMG402D Monitor and coordinate waste and process water treatment 40RIIWMG501D Implement the site water management plan 70RIIWMG601D Establish and maintain water management system 120RIIWSV201E Perform well servicing rig floor operations 50RIIWSV202E Carry out well servicing rig lease operations 30RIIWSV203D Prepare equipment for well servicing air operations 30RIIWSV301E Conduct and maintain well servicing derrick operations 50RIIWSV302D Well servicing trip production tubing/work string 30RIIWSV303D Operate fluid systems 40RIIWSV304D Prepare well servicing fishing operations 40RIIWSV401D Rig up and rig down for well servicing 30RIIWSV402D Conduct well servicing milling operations 30RIIWSV403D Participate in well servicing nippling-up and pressure test 30RIIWSV404D Conduct fishing operations 30RIIWSV501D Manage well servicing induction and orientation 50RIIWSV502D Manage well completion and rig release 50RIIWSV503D Manage and monitor rig up operations 40


SAMPLE TRAINING PROGRAMS

The following pages list a range of Sample Training Programs across the different qualification levels within the Resources and Infrastructure Industry Training Package to demonstrate how units might be packaged to meet a particular vocational outcome.

Occupation / Work Function

Mining Exploration Assistance

Qualification Title Certificate II in Mining Field/Exploration OperationsQualification Code RII20615Description For people working in a mining exploration team or work as a pit technician, who

undertakes a prescribed range of functions involving known routines and procedures and who takes some responsibility for the quality of work outcomes.

Notes This training program is a sample only. For advice on how to choose electives others than those listed below, please refer to the RII Resources and Infrastructure Industry Training Package and its Qualifications Packaging Rules or contact the CMM Engineering Industries on (03) 9286 9934

Unit Code Unit Title HoursCoreRIIWHS201D Work safely and follow WHS policies and procedures 20RIIENV201D Identify and assess environmental and heritage concerns 20HLTAID003 Apply first aid 18RIICOM201D Communicate in the workplace 20RIIEGS201D Operate in isolated and remote situations 40RIIEGS202D Conduct field work 40RIIQUA201D Maintain and monitor site quality standards 20RIIRIS201D Conduct local risk control 20RIISTD202D Collect routine site samples 40RIIVEH305E Operate and maintain a four wheel drive vehicle 40ElectivesCPPSIS3016A Provide field support services 40AHCNAR303A Implement revegetation works 80RIIEGS304D Mobilise equipment and materials 40RIIEGS305D Navigate in remote or trackless areas 40

Total hours 478



Production operator

Qualification Title Certificate III in Surface Extraction OperationsQualification Code RII30115Description For people such as production operators in an open cut mine or quarry,

who perform tasks involving a broad range of skilled applications in a varied work context, using some discretion and judgement in selecting equipment, services or contingency measures

Notes This training program is a sample only. For advice on how to choose electives others than those listed below, please refer to the RII Resources and Infrastructure Industry Training Package and its Qualifications Packaging Rules or contact the CMM Engineering Industries on (03) 9286 9934.

Unit Code Unit Title HoursCoreRIIWHS201D Work safely and follow WHS policies and procedures 20RIIENV201D Identify and assess environmental and heritage concerns 20RIIRIS301D Apply risk management processes 40ElectivesRIICOM302D Communicate workplace information 20RIIGOV201D Comply with site work processes/procedures 20RIIBHD301D Conduct surface blast hole drilling operations 60RIIBLA301D Conduct surface shotfiring operations 50RIIMPO301D Conduct hydraulic excavator operations 40RIIMPO304D Conduct wheel loader operations 40RIIMPO329D Conduct dragline operations 120RIIPRO301D Conduct crushing and screening plant operations 50RIIHAN208D Perform dogging 80RIIHAN305D Operate a gantry or overhead crane 40

Total hours 600



Quarry supervisor

Qualification Title Certificate IV in Surface Extraction OperationsQualification Code RII40115Description People such as a supervisor or team leader working in an open cut mine or quarry.

They perform tasks involving a broad range of varied activities most of which are complex and non-routine. They are responsible for the quantity and quality of the output of others, contribute to the development of technical solutions to non-routine problems and apply safety management plans to the workplace


Unit Code Unit Title HoursCoreBSBSUS301 Implement and monitor environmentally sustainable work practices 40RIICOM301D Communicate information 30RIIGOV401D Apply, monitor and report on compliance systems 80RIIRIS401D Apply site risk management system 40ElectivesBSBWHS401 Implement and monitor WHS policies, procedures and programs to

meet legislative requirements50

RIIMEX401D Apply pit plan 190RIIMEX404D Apply and monitor systems for stable mining 80RIIMEX405D Apply and monitor systems and methods of surface coal mining 80RIIMPO403D Monitor interaction of heavy and light vehicles and mining

equipment60

BSBINM401 Implement workplace information system 40RIIBLA301D Conduct surface shotfiring operations 50

RIIWHS401D Supervise work in confined spaces 60RIIQUA401D Apply a quality management system on site 60

Total hours 860



Processing manager

Qualification Title Diploma of Minerals ProcessingQualification Code RII50315Description This qualification reflects the role of metal or coal processing facility managers who

perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment/roles/techniques for themselves and others. They are required to demonstrate the application of a broad range of technical, managerial, coordination and planning and implement mine management plans.


Unit Code Unit Title HoursCoreBSBCUS501 Manage quality customer service 40BSBMGT516 Facilitate continuous improvement 60RIICOM301D Communicate information 30RIIENV501D Implement and maintain environmental management plan 120RIIERR503D Implement emergency preparedness and response systems 70RIIGOV501D Identify, implement and maintain legal compliance requirements 80RIIRIS402D Carry out the risk management processes 60RIIWMG501D Implement the site water management plan 70ElectivesBSBINM501 Manage an information or knowledge management system 50BSBINN502 Build and sustain an innovative work environment 50BSBSUS301 Implement and monitor environmentally sustainable work practices 40RIIPRO502D Develop, implement and maintain process control systems 40RIIRAI501D Implement mine transport systems and production equipment 60RIIRIS403D Manage and coordinate spill response 50RIISRM502D Design stockpile formations and reclaiming systems 40RIIWBP502D Plan and monitor recycled material operations 40

Total hours 900



Quarry Manager

Qualification Title Advanced Diploma of Extractive Industries ManagementQualification Code RII60215Description Personnel working in a quarry or other extractive industries operations who perform

tasks that are broad, specialised, complex and technical and include strategic areas and initiating activities. They are responsible for the establishment of the site management systems, plans and policies and are required to demonstrate self-directed application of theoretical and technical knowledge and initiate solutions to technical problems or management requirements.


Unit Code Unit Title HoursElectivesBSBINM601 Manage knowledge and information 80BSBMGT605 Provide leadership across the organisation 60BSBMGT608 Manage innovation and continuous improvement 70BSBMGT617 Develop and implement a business plan 60RIIBEF601D Conduct business negotiations 100RIIBEF604D Conduct a feasibility study 100RIIENV601D Establish and maintain the environmental management system 100

RIIGOV601D Establish, maintain and develop a statutory compliance management system

120

RIIWHS601D Establish and maintain the WHS management system 120RIIQUA601D Establish and maintain a quality system 100RIIRAI607D Establish quarry operations 100RIIRIS601D Establish and maintain the risk management system 100RIIMEX601D Plan pit development 120RIIPRO601D Design processing plant 150

Total hours 1380



Resources and Infrastructure work preparation

Qualification Title Certificate I in Resources and Infrastructure OperationsQualification Code RII10115Description For people entering the resources and infrastructure industry. It allows individuals to

develop basic skills and knowledge to prepare for work. They may undertake a range of simple tasks under close supervision. The range of technical skills and knowledge is limited.

Notes This training program is a sample only. For advice on how to choose electives others than those listed below, please refer to the RII Resources and Infrastructure Industry Training Package and its Qualifications Packaging Rules or contact the CMM Building & Construction, Furnishing and Water on (03) 9564 1987.

Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICOM201D Communicate in the workplace 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesBSBSUS201 Participate in environmentally sustainable work practices 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40

Total hours 140



Resources and Infrastructure work trainee

Qualification Title Certificate II in Resources and Infrastructure Work PreparationQualification Code RII20115Description This qualification reflects the roles of individuals who perform mainly routine tasks

and procedures, using limited practical skills and fundamental operational knowledge, and taking some responsibility for the quality of the work outcomes.


Unit Code Unit Title HoursCoreRIIWHS201D Work safely and follow WHS policies and procedures 20RIIRIS201D Conduct local risk control 20RIIENV201D Identify and assess environmental and heritage concerns 20ElectivesRIICCM201D Carry out measurements and calculations 20RIISAM203D Use hand and power tools 80RIISAM207D Apply operational maintenance skills 40RIISTD201D Read and interpret maps 40RIIBEF201D Plan and organise work 20RIICCM203D Read and interpret plans and specifications 40

Total hours 300


Occupation / Civil construction traineeWork FunctionQualification Title Certificate II in Civil ConstructionQualification Code RII20715Description This qualification reflects the role of individuals working in an operational role in civil

construction, who undertake a prescribed range of tasks using limited practical skills and fundamental knowledge, in a defined context working under supervision.

Notes This training program is a sample only. For advice on how to choose electives others than those listed below, please refer to the RII Resources and Infrastructure Industry Training Package and its Qualifications Packaging Rules or contact the CMM Building & Construction, Furnishing and Water on (03) 9564 1987

Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM202D Identify, locate and protect underground services 30RIICCM203D Read and interpret plans and specifications 40RIICCM205E Carry out manual excavation 8RIICCM207D Spread and compact materials manually 12RIICOM201D Communicate in the workplace 20RIIWHS201D Work safely and follow WHS policies and procedures 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20ElectivesRIICCM209D Carry out concrete work 40RIICCM211D Erect and dismantle temporary fencing and gates 40RIICRC208D Lay pipes 40RIIHAN211D Conduct basic scaffolding operations 56RIIHAN301D Operate elevating work platform 40RIIWHS202D Enter and work in confined spaces 30Total Hours 516


Occupation/ Work Function

Paving and surfacing assistant

Qualification Title Certificate II in Bituminous SurfacingQualification Code RII20815Description This qualification reflects the role of individuals working in bituminous surfacing in

the civil construction industry, performing routine tasks using practical skills and fundamental operational knowledge in a defined context, working under direct supervision.


Unit Code Unit Title HoursCoreRIICBS201D Conduct tack coat spraying operations 20RIICBS203D Safely handle bituminous materials 18RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICCM207D Spread and compact materials manually 12RIICOM201D Communicate in the workplace 20RIIWHS201D Work safely and follow WHS policies and procedures 20RIISAM201D Handle resources and infrastructure materials and safely dispose of

nontoxic materials16

RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20ElectivesRIIBEF201D Plan and organise work 20RIICBS202D Hand spread asphalt 18RIICBS204D Conduct aggregate spreader box operations 18RIICBS206D Conduct pavement sweeping operations 18RIICBS208D Conduct road maintenance operations 36RIICRC201D Repair potholes 36RIIRIS202D Respond to site based spills 20

Total hours 432



Mobile plant operator

Qualification Title Certificate III in Civil Construction Plant OperationsQualification Code RII30815Description This qualification reflects the role of a skilled operator working with civil construction

plant, who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge. The individual may provide theoretical advice and support a team.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM202D Identify, locate and protect underground services 30RIICCM203D Read and interpret plans and specifications 40RIICCM205E Carry out manual excavation 8RIICCM206D Support plant operations 8RIICCM207D Spread and compact materials manually 12RIICCM208D Carry out basic levelling 16RIICOM201D Communicate in the workplace 20RIIWHS201D Work safely and follow WHS policies and procedures 20RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWMG203D Drain and dewater civil construction site 20ElectivesRIIMPO319D Conduct backhoe/loader operations 200RIIMPO321E Conduct civil construction wheeled front end loader operations 160

RIIMPO323D Conduct civil construction dozer operations 240RIIMPO324E Conduct civil construction grader operations 240RIIMPO315D Conduct tractor operations 60

Total hours 1230


Occupation/ Civil construction general workerWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in general occupations in civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesCPCCSF2004A Place and fix reinforcement materials 80RIICBS308D Load aggregate using a purpose built loader 20RIICBS309D Conduct self-propelled aggregate spreader operations 30RIICBS310D Conduct patching operations 60RIICCM209D Carry out concrete work 40RIICBM306D Undertake concreting work on concrete bridges 80RIICBM307D Construct formwork and false work on concrete bridges 120RIICRC201D Repair potholes 36RIICCM211D Erect and dismantle temporary fencing and gates 40RIICCM301D Construct and dismantle fences and gates 40RIICBS304D Compact asphalt with rollers 44RIICRC306D Conduct earthworks 80RIICRC307D Conduct road pavement construction 24RIIHAN211D Conduct basic scaffolding operations 56RIIHAN301D Operate elevating work platform 40RIIMPO319D Conduct backhoe/loader operations 200RIIMPO321E Conduct civil construction wheeled front end loader operations 160

RIIHAN307D Operate a vehicle loading crane 40Total hours 1410


Occupation / Bituminous surfacing operatorWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in the bituminous surfacing sector of civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesRIICBS202D Hand spread asphalt 18RIICBS203D Safely handle bituminous materials 18RIICBS207D Take samples of materials used in road surfacing 10RIICCM207D Spread and compact materials manually 12RIIWHS302D Implement traffic management plan 20RIIIMG301D Maintain site records 10RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIICBS201D Conduct tack coat spraying operations 20RIICBS206D Conduct pavement sweeping operations 18RIICBS208D Conduct road maintenance operations 36RIICBS302D Conduct paver screeding operations 58RIICBS303D Conduct materials transfer vehicle operations 56RIICBS304D Compact asphalt with rollers 44RIICBS305D Conduct asphalt paver operations 52RIICBS307D Conduct bitumen sprayer operations 100RIICBS310D Conduct patching operations 60RIICCM205E Carry out manual excavation 8RIICBS304D Compact asphalt with rollers 44Total hours 820


Occupation / Bridge Construction and maintenance workerWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in the bridge construction and maintenance sector of civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesRIICCM202D Identify, locate and protect underground services 30RIICCM205E Carry out manual excavation 8RIICCM206D Support plant operations 8RIICCM207D Spread and compact materials manually 12RIICCM208D Carry out basic levelling 16RIIWHS302D Implement traffic management plan 20RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIIWMG203D Drain and dewater civil construction site 20CPCCSF2004A Place and fix reinforcement materials 80RIICBM301D Maintain concrete bridges 80RIICBM302D Install pre-cast girders 80RIICBM303D Install pre-cast parapets 80RIICBM304D Operate a bridge inspection unit 80RIICBM305D Install pre-cast concrete bridge decks 80RIICBM306D Undertake concreting work on concrete bridges 80RIICBM307D Construct formwork and false work on concrete bridges 120RIICCM211D Erect and dismantle temporary fencing and gates 40RIIHAN208D Perform dogging 80Total hours 1150


Occupation / Pipe laying workerWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in the pipe laying sector of civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesRIICCM202D Identify, locate and protect underground services 30RIICCM205E Carry out manual excavation 8RIICCM206D Support plant operations 8RIICCM207D Spread and compact materials manually 12RIICCM208D Carry out basic levelling 16RIIWHS302D Implement traffic management plan 20RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIIWMG203D Drain and dewater civil construction site 20RIICCM210D Install trench support 16RIICRC208D Lay pipes 40RIICCM209D Carry out concrete work 40RIICPL301D Install water mains pipelines 40RIICPL302D Install stormwater systems 40RIICPL303D Install sewer pipelines 40RIICPL304D Install pre-cast gully pits 40RIICPL305D Install pre-cast access chambers 40RIICRC209D Lay reinforced concrete box culverts 40RIIWHS202D Enter and work in confined spaces 30Total hours 716


Occupation / Road construction and maintenance workerWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in the road construction and maintenance sector of civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesRIICCM202D Identify, locate and protect underground services 30RIICCM205E Carry out manual excavation 8RIICCM206D Support plant operations 8RIICCM207D Spread and compact materials manually 12RIICCM208D Carry out basic leveling 16RIICRC201D Repair potholes 36RIIWHS302D Implement traffic management plan 20RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIIWMG203D Drain and dewater civil construction site 20CPCCSF2004A Place and fix reinforcement materials 80RIICRC202D Install signs 16RIICRC208D Lay pipes 40RIICRC306D Conduct earthworks 80RIICRC307D Conduct road pavement construction 24RIICRC315D Use concreting materials and equipment 60RIIHAN208D Perform dogging 80RIIMPO319D Conduct backhoe/loader operations 200RIIMPO320E Conduct civil construction excavator operations 200Total hours 1166


Occupation / Road marking workerWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in the road marking sector of civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesRIICRM202D Handle and store road marking materials 8RIICRM204D Prepare surface for road marking 16RIIWHS302D Implement traffic management plan 20RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIICCM208D Carry out basic levelling 16RIICCM209D Carry out concrete work 40RIICRM201E Escort mobile works 24RIICRM203D Conduct pedestrian road marking operations 24RIICRM205D Conduct road marking measuring operations 16RIICRM206D Conduct airless and atomised spraying operations 20RIICRM207D Install raised pavement markers 16RIICRM301D Conduct ride on road marking operations 16RIICRM302D Conduct long line road marking operations 40RIICRM303D Conduct thermo plastic road marking operations 30RIIWHS205D Control traffic with stop-slow bat 20Total hours 542


Occupation / Tunnel construction workerWork FunctionQualification Title Certificate III in Civil ConstructionQualification Code RII30915Description This qualification reflects the role of a skilled operator working in civil construction,

who applies a broad range of skills in a varied work context, using some discretion and judgement and relevant theoretical knowledge.This sample program is designed for a person working in the tunnel construction sector of civil construction.


Unit Code Unit Title HoursCoreRIIBEF201D Plan and organise work 20RIICCM201D Carry out measurements and calculations 20RIICCM203D Read and interpret plans and specifications 40RIICOM201D Communicate in the workplace 20RIISAM203D Use hand and power tools 80RIISAM204D Operate small plant and equipment 20RIIWHS201D Work safely and follow WHS policies and procedures 20ElectivesRIICCM202D Identify, locate and protect underground services 30RIICCM205E Carry out manual excavation 8RIICCM206D Support plant operations 8RIICCM207D Spread and compact materials manually 12RIICCM208D Carry out basic levelling 16RIICRC203D Install sub-soil drainage 20RIISAM201D Handle resources and infrastructure materials and safely dispose of


RIIWMG203D Drain and dewater civil construction site 20RIICFW302D Install temporary and permanent rock anchors 24RIICFW303D Install primary ground support 24RIICRC301D Maintain drainage systems 16RIICTC301D Install tunnelling constructions services 80RIICTC302D Line tunnel 80RIICTC303D Excavate tunnel by machine 32RIICTC304D Muck out tunnel earthworks 16RIICTC305D Construct portals 24RIIWHS202D Enter and work in confined spaces 30RIIHAN211D Conduct basic scaffolding operations 56Total hours 732


Occupation / Supervisor in civil constructionWork FunctionQualification Title Certificate IV in Civil Construction SupervisionQualification Code RII40715Description This qualification reflects the role of employees working in supervisory positions in

civil construction. They perform tasks involving a broad range of varied activities most of which are complex and non-routine. They are responsible for the quantity and quality of the output of others, contribute to the development of technical solutions to non-routine problems and apply management plans to the workplace.


Unit code Unit title HoursCoreBSBMGT401 Show leadership in the workplace 50BSBMGT402 Implement operational plan 40BSBWHS401 Implement and monitor WHS policies, procedures and programs to

meet legislative requirements50

RIICWM401D Supervise civil works 80RIIRIS401D Apply site risk management system 40ElectivesLGAWORK401A Develop works maintenance schedule 60LGAWORK402A Prepare for operational works 60RIICSG402D Apply the principles of civil steel structures construction 100RIICSG405D Carry out inspections of civil structures 100

RIICWM402D Supervise civil works contractors 100MSL974001A Prepare, standardise and use solutions 100RIIGOV401D Apply, monitor and report on compliance systems 80

Total hours 860



Civil construction site manager

Qualification Title Diploma of Civil Construction ManagementQualification Code RII50415Description The Diploma of Civil Construction Management reflects the role of personnel

working on a single or a group of Civil Construction sites, who perform tasks involving a high level of autonomy and require the application of significant judgement in planning and determining the selection of equipment/roles/techniques for themselves and others. They are required to develop site specific work instructions and practices to ensure the implementation of the site management systems, plans and policies. They demonstrate the application of a broad range of technical, managerial, coordination and planning skills.


Unit Code Unit Title HoursCoreBSBWHS501 Ensure a safe workplace 60BSBWOR502 Lead and manage team effectiveness 60RIIENV501D Implement and maintain environmental management plan 120RIIQUA501D Implement, monitor and develop quality management plans 100RIIRIS501D Implement and maintain management system to control risk 80ElectivesRIICWM501D Implement civil construction plan 120BSBFIM501 Manage budgets and financial plans 70BSBINN502 Build and sustain an innovative work environment 50BSBMGT516 Facilitate continuous improvement 60BSBPMG521 Manage project integration 60BSBPMG511 Manage project scope 40RIICWM503D Prepare civil works cost estimate 100RIICWM504D Prepare civil works bill of quantities 100

Total hours 1020



Civil construction contract manager of multiple projects

Qualification Title Advanced Diploma of Civil ConstructionQualification Code RII60615Description The Advanced Diploma of Civil Construction reflects the role of managers working in

Civil Construction who perform tasks that are broad, specialised, complex and technical and include strategic areas and initiating activities. They are responsible for the establishment of the site management systems, plans and policies and are required to demonstrate self-directed application of theoretical and technical knowledge and initiate solutions to technical problems or management requirements.


Unit Code Unit Title HoursCoreBSBMGT605 Provide leadership across the organisation 60RIIENV601D Establish and maintain the environmental management system 100

RIIWHS601D Establish and maintain the WHS management system 120RIIQUA601D Establish and maintain a quality system 100RIIRIS601D Establish and maintain the risk management system 100ElectivesRIICWM601D Establish civil constructions plans 300RIIBEF601D Conduct business negotiations 100RIIBEF602D Establish and evaluate operational performance management

systems120

RIIBEF604D Conduct a feasibility study 100RIICWM503D Prepare civil works cost estimate 100RIICWM504D Prepare civil works bill of quantities 100RIICWM505D Prepare civil works schedule of rates 100

Total hours 1400


CONTACTS AND LINKS

Curriculum Maintenance Manager (CMM)

Coal, Drilling, Extractive Industries and Metalliferous Mining

Civil Construction

The CMM Service is provided by Executive Officers, across all industry areas covered by Training Packages.

They can assist with questions on payable and nominal hours.

Dennis Crowley

Box Hill Institute

Private Bag 2014, Box Hill VIC 3128

Phone: (03) 9286-9934

Fax: (03) 9286-9838

Email: [email protected]

Teresa Signorello

Holmesglen Institute of TAFE

P.O. Box 42, Chadstone VIC 3148

Phone: (03) 9564-1987

Fax: (03) 9564-1538

Email: [email protected]

Industry Skills Council (ISC)

SkillsDMC National Industry Skills Council

This ISC is responsible for developing this Resources and Infrastructure Industry Training Package, companion volumes and support material and can be contacted for further information.

02) 9324 8617

http://www.skillsdmc.com.au

[email protected]

National Register for VET in Australia

Training.gov.au (TGA)

TGA is the Australian governments’ official National Register of information on Training Packages, Accredited Courses, qualifications, units of competency and RTOs.

http://training.gov.au

Australian Government

Department of Education and Training

The Commonwealth Department is responsible for national policies and programmes that help Australians access quality vocational education and training.

https://education.gov.au/

Victorian State GovernmentRII Resources and Infrastrucure Industry- February 2016

Page 48 of 51

https://education.gov.au/

http://training.gov.au/

mailto:[email protected]

http://www.skillsdmc.com.au/




Department of Education and Training (DET)

DET is responsible for funding and the implementation of Vocational Education and Training (VET) in Victoria, including Apprenticeships and Traineeships policy.

(03) 9637 2000

www.education.vic.gov.au

National VET Regulatory Authority

Australian Skills Quality Authority (ASQA)

ASQA is the national regulator for Australia’s VET sector.

Info line: 1300 701 801

www.asqa.gov.au

Victorian State VET Regulatory Authority

Victorian Registration and Qualifications Authority (VRQA)

The VRQA is a statutory authority responsible for the registration and regulation of Victorian RTOs and for the regulation of apprenticeships and traineeships in Victoria.

(03) 9637 2806

www.vrqa.vic.gov.au

Industry Regulatory Bodies applicable to this Training Package

Department of Environment, Land, Water & Planning. (for shot firing in relation to mines and/or quarries)

The industry Regulatory body can provide advice on licensing, legislative or regulatory requirements which may impact on the delivery of training or the issuance of qualifications in this Training Package.

Phone: 136 186Web:http://delwp.vic.gov.au/

Victorian Drillers’ Licensing Board Secretariat

Licensing is compulsory for drilling wells or bores to access water from underground. Please contact Southern Rural Water

Phone: 1300 139Web:www.srw.com.auEmail:[email protected]

WorkSafe Victoria(for shot firing in relation to sectors other than mines and/or quarries) Licensing Branch

WorkSafe needs to provide written verification before High Risk Work Units can be added to an RTO’s scope of registration.

Info Line: 1800 136 089

Email:

www.worksafe.vic.gov.au

Australian Drilling Industry Training Committee Ltd

Information on the ‘National Water Well Drillers’ Licensing System’

(02) 9428-3444Web:www.aditc.com.auEmail:[email protected]

Minerals & Petroleum Regulation Branch

Information to undergo assessment by the ‘Quarry Managers’ Advisory Panel’ to gain certification as a quarry manager.

(03) 9412-4011

Vic Roads Information on registering Vic Roads work sites. (03) 9854-2666Web:www.vicroads.vic.gov.au

Energy Safe Victoria Information about staying safe and observing the law when digging near electricity cables.

General Enquires: 1800 652 563Web:www.esv.vic.gov.auDial before you dig: 1800 800 158Web:


http://www.esv.vic.gov.au/

http://www.vicroads.vic.gov.au/


http://www.aditc.com.au/

http://www.worksafe.vic.gov.au/


http://www.srw.com.au/

http://delwp.vic.gov.au/

http://www.vrqa.vic.gov.au/

http://www.asqa.gov.au/

http://www.education.vic.gov.au/

www.dialbeforeyoudig.com.au


http://www.dialbeforeyoudig.com.au/

GLOSSARY

Code Nationally endorsed Training Package qualification code.

Title Nationally endorsed Training Package qualification title.

Unit Code Nationally endorsed Training Package unit of competency code.

Unit Title Nationally endorsed Training Package unit of competency title.

Payable Hours The maximum number of hours the Victorian Government will subsidise under the Victorian Training Guarantee for the achievement of the minimum realistic vocational outcome of any qualification, as determined by the qualification packaging rules. The maximum payable hours do not cover every possible combination of core and elective units available for a specific qualification.

Nominal Hours Nominal hours reflect the anticipated time taken to deliver and assess the outcomes of a unit of competency excluding unsupervised delivery or the time taken for repeated practical application of skills. Nominal hours are determined by the Victorian State Training Authority (DET) and are primarily developed for funding purposes in Victoria.


Documents

Victorian Purchasing Guide for RII Resources and … · Web viewSupervise underground in-seam directional drilling operations 65 RIINHB501E Plan drilling 60 RIIOGD201D Assist in maintaining