8/15/2019 Vibrotech Instruments Catalogue
1/1
Official Agents for Vibration Instruments of VMI INTERNATIONAL
AB - Sweden
Features:
• Measures Vibration velocity, Displacement,
Acceleration
and Bearing condition, Temperature.• Bearing noise
detection using headphone.• 5 Highest amplitude Peaks and its
frequency viewing
facility• Selectable frequency ranges.• Clear Alarm
and danger, Red and Yellow, LED indicator.•
Rechar eable Batteries and Char er
For Further Details contact:
64 MB Internal Memory
Storage capacity: 999 Points
Diagnostic Software ( SpectraPro) : Bearing
Database, 4 different bearings in each location, Spectrum with
Fault Frequencies of Gears, Belt, Electrical Motor,
Blade Pass with Side Bands & Harmonics. In Route one
measurement parameter sufficient at each point. Automatic
measurements of Displacement, Velocity,
Acceleration, Envelope & BC by instrument -
Time saving Advantage.
VIBROTECH TRAINERS & CONSULTANTS PVT LTD., &
Phone: 044 - 24486363 / 64, Fax: +91 – 44 – 24486364, Mobile :
+91 94440 43414 Email:
[email protected], [email protected] Web Site
: www.vibrotechchennai.com / www.vibrationconsultancy.com
Official Representative in India:Vibration Institute - USA (for
ISO Vibration Analyst Course & Certification)VMI International
AB - SWEDEN (Instruments measuring Rotating &
Reciprocating Machine Vibration)Vibraquipa S.L.U. - SPAIN
(Instruments measuring Ground, Building & Structure
Vibration)
Weight 400 Grams with Batteries
Weight 1200 Grams with Batteries
PORTABLE VIBRATION ANALYSERS CUM BALANCERS
2 GB Internal Memory
PORTABLE VIBRATION METERS WITH MINI ANALYSING FACILITY
CONTINUOUS VIBRATION MONITORING INSTRUMENTS
VIBER X1 VIBER X2
Every channel has:♦
Analysis output♦ mA output(RMS)♦
Independent alarm and trip relay functions♦
Transient and voltage protection on every input andoutput
The Base frame has:♦
Common power unit for all channels♦ Power supply 24VDC,
110VAC and 220VAC♦
Screw terminals for cable connections♦ Channel switch♦
Display for alarm and vibration level of selectedchannel
VIBER VM 42 – Vibration Monitor 10 Channel
VIBER X3
VIBER M2 - Vibration Monitor 1 or 2 Channel
Features:• Selectable two frequency ranges• (1.5 to
2000 HZ / 10 Hz to 2000
Hz)• Selectable three measuring
range• (0–10 mm/s, 0–20 mm/s, 0-100
mm/s)• Monitoring Transducer/cable
failure• Two Alarms levels• Single/Two channel
available
/ +
/ & /
/ &
/ / /
/ /
/ /
/ /
/ /
/ /
()
25600, ,
, 65
2
: , , ,
, ,
, ,
&
& ,
:
Features:
• Measures Vibrationvelocity and Bearing
condition• Rechargeable Batteries
and Charger
Features:
• Measures Vibration velocity, Displacement,
Acceleration and Bearing condition.• Highest
amplitude Peak viewing facility• Selectable frequency
ranges.• Clear Alarm and danger, Red and Yellow,
LED indicator.•
Rechargeable Batteries and Charger
