Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
© 2020 EWS GmbH & Co. KG page 1 of 4 Date: April 2020
Record of on-site visit / date: by:
Plant location: via fax to: +49 (0) 4608 16 63
The delivery address corresponds to the location of the plant. Please state a differing delivery address in the section “Other information / customer preferences“.
Full Name:
Company:
Street:
Zip Code/City:
Phone/Fax:
E-mail:
Commission:
Installation period:
1.
Type of building / roof specification (mandatory)
We cannot provide a detailed project planning and offer without the following information!
Single family home Apartment house Storage Stable Others:
Project type: New system Expansion* Repowering* *Please state the plant size for the existing plant (quantity of modules / inverter)
Pitched roof / Flat roof
Roof area size: a = m; b = m
Roof pitch: c = °
Alignment: ° (deviation of side b from South)
Ridge height/height of construction: d = m
Eaves height: e = m
Attica height (flat roof) = mm
Roofing:
Corrugated sheet Shingle Fibre cement → asbestos-containing? yes no
Roof tile Plain tile Sandwich (Please attach data specification.)
Bitumen (tar paper) Interlayer, type Web width
Other:
Troughed sheet (see graphic on the right):
Upper seam width: a = mm
Lower seam width: b = mm
Trapezoid height: c = mm
Raised seam spacing: d = mm
Sheet gauge: f = mm
Insulation lies above the carrying roof construction (rafter/purlin)
Thickness: e = mm
Company stamp
PV
© 2020 EWS GmbH & Co. KG page 2 of 4 Date: April 2020
Substructure
Type A – rafter roof or Type B – purlin roof
Sparrenabstand: a= mm
: a= mm
Rafter span: a= mm Purlin span: a= mm
Rafter strength: b= mm Purlin strength: b= mm
Rafter width: c= mm Purlin width: c= mm
Lath width: d= mm Binder span: d= mm
Lath strength: e= mm
Rafter-/purlin material
Steel structure: Wood construction: Concrete:
Z-section C-profile Solid wood Armored concrete
Double-T-section Square-profile Lightweight construction Aerated concrete
Others: Please sketch the profile of the subconstruction on page 4.
Roof connection via:
Roof hook: Adjustable in height Standard
Stair bolt Trapezoidal sheet connector Please sketch the profile on page 1.
Roof shows warpings on: ca. cm per 6 m.
Others:
Project planning Unless indicated otherwise, we assume a single layer mounting system with horizontal module alignment/elevation and maximum coverage of the surface.
Maximum output per area (Use of the highest performing modules of the preferred producer)
Maximum coverage of the surface
Size of system limited to: kWp
Dimensioning mounting system: Module alignment:
Single layer Horizontal Vertical
Two-layer (cross connector)
Maintenance gangway necessary No preference
Elevation:
Elevation requested by*: ° *In case of missing detail, we assume an elevation of 10° or 15°.
Direction of elevation: South East-West
Connection to elevation:
Mechanical Optimised ballasting*
(e.g. hanger bolt) *only horizontal module alignment possible max. 15°
Ballasting (max. ballasting / m² roof area = kg according to static): kg/m2
d
© 2020 EWS GmbH & Co. KG page 3 of 4 Date: April 2020
2.
Choice of components / details on project planning (optional)
Unless indicated otherwise, we select the components according to their availability or make general assumptions.
Module preference
REC, type: LG Solar, type:
Luxor Solar, type: Jinko Solar, type:
Trina Solar, type: no preference
Module frame
Silver Black
No preference
Back sheet:
White Black
Transparent No preference
Inverter preference / battery system
Battery system requested Capacity: ____ kWh
Fronius, type: SMA, type:
KOSTAL, type: SolarEdge, type:
Delta, type: LG Chem, type:
BYD, type: LG ESS, type:
FENECON, type: No preference
Adapt system / battery size to the power consumption:
Annual consumption: kWh electricity costs: Cent/kWh net gross
Load profile: (e.g.: 2 person household, commercial)
Mounting system preference
ALTEC Metalltechnik K2 Systems ALUMERO No preference
Data evaluation
Via Display: Master display: B: H: mm for Indoor or Outdoor
Via PC: Cable connection WLAN
Network connection Cell-phone connection
Component preference:
like inverter producer Solar-Log (Solare Datensysteme GmbH)
3.
Additional information (optional)
This set of data can be used to estimate the costs and to calculate the return on investment for the final customer.
Wiring and installation
Idle energy meter: Yes No Existing energy meter: pcs Electricity supplier:
1. Meter point administration no.: 2. Meter point administration no.:
Inverter position: Indoor Outdoor
Cableway:
PV modules to inverter*: m In case of missing detail, we assume a cableway higher than 10m.
Inverter to grid connection point: m
Services provided onsite:
Lightning protection system at hand: Yes (please sketch on page 4) No
Inverter specifications
Specification with regard to the power grid: Transformer required Yes No
Specification with regard to feed-in: Single-phase Three-phase
Power reduction for photovoltaic systems requested:
© 2020 EWS GmbH & Co. KG page 4 of 4 Date: April 2020
Sketch
Please sketch and dimension the structural conditions. (e.g. chimney, roof-light, skylight, trees, shadow etc.)
Examples:
B
Other information / customer preference
Please make sure the recorded data is correct. EWS will not review it and therefore cannot be held responsible for any problems and damage due to inaccurate data or information.
Site plan View from the South
N
O
S
W