8/7/2019 VF_QSG-SP

1/2

GetaQuickStart MediaFlex RouterD E F A U L T S

Network name V54-xxxxxx (provider)(where xxxx is the last 6-digits of MAC address)

V54-HOME001 (user)

Security WPA-PSK (provider SSID)Disabled (user SSID)

IP addressing 192.168.1.1 (router LAN ports)192.168.0.1 (router WAN port)192.168.0.254 (adapter)

Username/Password u/n: super p/w: sp-admin (provider)u/n: admin p/w: password (user)

PowerIndicator

WANConnectivity

WLANDeviceAssociation

SignalQuality

Your Mediaex router has a

basic deault confguration

or auto-provisioning process

described below. However,

i you wish to change any o

the deault parameters (SSID,

encryption type, encryption

key, password etc.), you must

confgure the Mediaex router

beore perorming the auto-

provisioning set-up

(see User Manual).L E D G U I D E

(complete explanation o LED behavior in User Manual

Power on

WAN connectedgreen=100 Mbpsamber=10 Mbps

No associateddevices

Device(s)associated

Associated stationwith lowest signalstrength connectedperectly

Associated stationwith lowest signalstrength connectedOK

Associated stationwith lowest signalstrength connectedpoorly

Hardware problem

Blinking

Blinking

Adapter Router

When autoprovisioncomplete, disconnect cable

Autoprovisioningin process

Autoprovisioningcomplete

ADAPTER LEDs

2 right LEDs are blinking 2 right LEDs are o

Amber

Green

Green/Amber

Green

Green

Green

Green/Red

Red

F O R T H E S E R V I C E P R O V I D E R

Plug in A/C adapters and connectto Ruckus router and adapter.

Autoprovision by directly connecting Ruckus routerto Ruckus adapter with an Ethernet cable (supplied)

Plug one end o the Ethernet cable into LAN porto DSL modem or broadband gateway and theother into the WAN port o the MediaFlex router

Attach Ruckus adapter to receiving devices(eg. set top box, game machine, computer, etc.), turn on TVto ensure connectivity and (optional) turn on wirelesslaptop to connect o the Internet

062906

1

2

3

4

I you have PPPoE serviceturn over or instructions

8/7/2019 VF_QSG-SP

2/2

GetaQuickStartwithPPPoEg

Power on Ruckus router and plug one end o

the Ethernet cable (supplied) into any o the

frst our LAN ports and the other into yourcomputers Ethernet port

Run Web browser and enter the deault IP addresso router (192.168.1.1) in address bar, then enterthe required username and password to login to

Ruckus router

From Main Menu, click onInternet under the Confgurationoption. Then select on thePPPoE

radio button and enter the required

username and password or the

PPPoE service and click the Update

Settings button

Once confgured, ollow allsteps (1-4) on other side othis Quick Start sheet.

062906

1

2

3

4

NOTE: Many service providers require username and password authentication beore providingbroadband connectivity. To do this, you must enter your specifc confguration inormation or PP-PoE service to work. This inormation can be obtained rom your Internet Service Provider.

F O R T H E S E R V I C E P R O V I D E R