vestax Pmc 05-pro sl

8/10/2019 vestax Pmc 05-pro sl

1/16

Vestax Corporation

1

JAN.2005 PMC05ProSLVCAE

P/N: 4301-7148-1


2/16

OWNER'S MANUAL

2


3/16

CONGRATULATIONS

3

Vestax PMC05ProSLVCA


4/16

4


5/16

FEATURES

This machine includes SAMPLER and a DELAYfunction .You can use delay sounds or sampling loop by pushingthe EFFECT switch on the each PGM input channel andMIC input channel without connecting other effectors.You can use over-dubbing for the sampler function.It is possible to record other phrases in piles in thephrase which sample recording was carried out.Therefore, the possibility of DJ plays on the stage growsfurther.Moreover, it is also convenient for DJ play or practice of

scratch.By introducing double panel structure, the attachmentscrew of the fader circumference on the front panelcausing trouble in the case of scratch performance andthe slot on the panel were eliminated.The fader location reflecting professional DJ's opinionrealizes high performance.The VCA system is adopted as the crossfader sectionwhich serves as an important point in the case ofscratch performance.Since this system does not go through a sound signal inthe crossfader itself, it realizes a long-life and high-quality sound.

5

The input select switch can be set up in the operationdirection(vertical,holizontal, slant)Each input is equipped with the equalizer of two bandsof HI and LOW.Fine compensation for tone quality is possible.CF reverse switch is enable to exchange the side PGM1to PGM2 quickly.The curve property of a crossfader can be changed bythe volume on a top panel.Moreover, you can change a curve property into threesteps by the switch on a fader unit.

PMC-05pro3 has a select switch for headphone monitor.It is possible to monitor the signal inputted and thesignal outputted by changing each other.Since you can monitor master output with loweredMASTER LEVEL volume, it is convenient to practiceeven at night.


6/16

FUNCTIONS

qTRIM (PGM1/PGM2)

wPGM EQ (PGM1/PGM2)

ePGM BALANCE (PGM1/PGM2)

6


7/16


8/16

!7SAMPLER/DELAY SELECT SWITCH

!8DELAY TIME

!9FINE

@0FEEDBACK

@1REC SWITCH

@2REC INDICATOR

@3OVERDUB DELETE SW

@4LOOP SWITCH

@5LOOP INDICATOR

Notes

Notes

Notes

Notes

8


9/16

@6MIX VOLUME

@7EFFECT CUE SWITCH

@8EFFECT CUE INDICATOR

@9LEVEL/PLAY VOLUME

#0CURVE SWITCH

#1TAP SWITCH

#2MIC input jack

#3MIC EFFECT SWITCH

#4MIC EFFECT INDICATOR

#5

#6

MIN MAX

LEVEL

EFFECT

MIC IN

MIC

MIC LEVEL VOLUME

PHONES (headphone) jack

#

#

#

$

$

9


10/16

INPUT - PGM 1INPUT - PGM 2

POWER

LINE 2

PHONO 2

1

2

GND 2LRLR

LINE 1

FOOT SW(REC)PHONO 1

GND 1LR

LINE OUT

MADE IN CHINA UNDER LICENCEOF VESTAX TOKYO, JAPAN

SERIAL NO.

#7FOOT SWITCH JACK

#8LINE INPUT JACK

#9PHONO INPUT JACK

$0MASTER OUT JACK

$1GND TERMINAL

$2POWER JACK

$3POWER SWITCH

Notes

10

(AC-14).


11/16

HOW TO USE THE SAMPLER/DELAY

1.Set it as DELAY mode

2. Set up delay time

3. Choose the channel to whichan effect is applied

4. Apply the effect.

11


12/16

1. Set it as SAMPLER mode.

2. Select the channel to record

3. Record

4. PLAYBACK

12


13/16

1.Turn on loop playback mode

2. Start loop playback

3. Select the channel to record

4. Over dubbing

5. Playback

13


14/16

14


15/16

C

S

15


16/16

CONNECTION

SPECIFICATION

16

AC-14V 1000mA

Documents

vestax Pmc 05-pro sl