Vertical Machining Centers - Bulmakmetal Ltdbulmakmetal.com/wp-content/uploads/2016/10/MILLAC_VII_series-E-2a...OSP-P300 The innovation that ... Okuma Control OSP-P300M Interactive

Vertical Machining Centers

1 2

Thermo-FriendlyConcept

Collision AvoidanceSystem

MachiningNavi

Vertical Machining Centers

Highly rigid slide guideway structure for powerful cutting and reduced cycle timeThermo-Friendly Concept enables improved productivity with high dimensional stability

Premium DesigningHarmonious human-machine interaction produces new forms.Add to that, reliably cultivated and sustainable innovation from a comfortable work place found in a pleasing factory environment.With superior quality and value, Premium Designing has begun.

Photos shown in this brochure may also show optional equipment.

3 4

■ Bed columnStrong base column construction has optimally-placed ribs to counter chatter and twisting during heavy-duty cutting. Traditional box ways is used for all axes to give high accuracy and rigidity over the long term.

0

500

1,000

500

1,00

0

1,50

0

2,00

0

2,50

0

3,00

0

MILLAC 761V

Spindle speed [min-1]

Motor output (OSP)

Motor output (FANUC)


Motor output (OSP)



Motor output (OSP)



Motor output (OSP)


50 to 15,000

26/18.5 kW

22/18.5 kW

60 to 6,000

18.5/11 kW

18.5/11 kW

80 to 12,000

22/18.5 kW

22/18.5 kW

60 to 10,000

22/18.5 kW

22/18.5 kW

30 to 6,000

15/11 kW

15/11 kW

20 to 4,000

15/11 kW

15/11 kW

50 to 15,000

26/18.5 kW

22/18.5 kW

50 to 12,000

26/18.5 kW

22/18.5 kW

20 to 4,000

18.5/15 kW

18.5/15 kW

30 to 6,000

18.5/15 kW

18.5/15 kW

20 to 4,000

22/18.5 kW

22/18.5 kW

30 to 6,000

22/18.5 kW

22/18.5 kW

Integralmotor/spindle

Integralmotor/spindle

Gear

No.40

No.50

MILLAC 468V MILLAC 561V MILLAC 611V MILLAC 761V MILLAC 852V MILLAC 1052V

Diverse lineup to meet all kinds of needs

Reassuring high-rigidity construction gives powerful, high-speed heavy-duty cutting

Note: Platform raised machine may be required with some applications.

■ Recommended Chip Conveyors (Please contact an Okuma sales representative for details.)

■ Spindle specifications

■ Off-machine lift-up chip conveyors

Workpiece material Steel

Chip shape

In-machine

Off-machine

Screw type

Hinge type

Scraper type

Scraper type (with drum �lter)

Hinge + scraper (with drum �lter)

FC Aluminum / Nonferrous Mixed (general use)

—

—

(*1)

—

(Dry)

(Wet) with magnet

(Wet) (*2)

—

—(*3)

(*4)

—

—

Name

Shape

Hinge type Scraper type Scraper type (with drum �lter) Hinge + scraper (with drum �lter)

: Recommended : Recommended with conditions

Highly rigid construction*1. When there are many �ne chips *2. When chips are longer than 100 mm *3. When chips are shorter than 100 mm *4. When there are few �ne chipsNote: Fire prevention measures are necessary, as use of oil-based coolant may cause �re.

Trying to cool beyond what is reasonable to limit thermal deformation

5 6

0 4 8 12 16 20 24

28°C

8°C20°C

—20.0—10.0

0.010.020.0

18222630

0 3 6 9 12 15 18 21 24

—20.0—10.0

0.010.020.0

18222630

28°C

8°C20°C

OSP-P300

The innovation that accepts temperature changes Thermo-Friendly Concept*


Thermo-Friendly Concept

Machine coversPeripheral equipment placementMachine “hot spots” diffused

Machine designs thatequalize ambient

temperatures

Symmetrically builtThick walls

Simple machlneconstruction

TAS-CTAS-S

Highly Accurate Compensation Technology

1. Minimal thermal deformation

2. Manageable thermal deformation

3. Accurate compensation

TAS-C: Thermo Active Stabilizer – Construction*TAS-S: Thermo Active Stabilizer – Spindle*

Super thermostability minimizes machiningdimensional changes over time

*MILLAC 468V /561V have optional speci�cations.MILLAC 611V /761V /852V /1052V have standard speci�cations.

Time (H)

MILLAC 561V uses thermo active stabilizer—construction (TAS-C) (Opt)

Sample machining dimensional change over time: / 8ºC change in room temperature

Sample machining dimensional change over time: / 8ºC change in room temperature

Dim

ensi

onal

cha

nge

(μm

)

Roo

m t

emp

erat

ure

(ºC

)

Time (H)

Dim

ensi

onal

cha

nge

(μm

)

Roo

m t

emp

erat

ure

(ºC

)

* The “actual data” referred to above for this brochure represent examples, and may not be obtained due to differences in specifications, tooling, cutting, and other conditions.

* Positioned on X, Y, and X directions and machined with ø10 carbide end mill at 4,000 min-1

Measurement position: Table center with use of coolant.Data are with full enclosure shielding specifications.

* Data are with full enclosure shielding specifications.

MILLAC 1052V (X-axis travel 2,050 mm specs)

X axisY axisZ axis

Y: 13 μm

Z: 11 μm

X: 3 μm

X: 6 μm Z: 8 μm Y: 6 μmWith TAS-C

■ World’s first “Collision-Free Machine”CAS prevents collisions in automatic or manual mode, providing risk-free protection for the machine and great con�dence for the operator.

Okuma Intelligent Technology for competitive machine shops

IntelligentTechnology

Collision Avoidance SystemCollision prevention

■ Finding the best cutting conditions quicklySensors built in to the machine detect and analyze machining chatter. Machining Navi then navigates to the effective measures in a wide range of spindle speeds, from low to high.

Machining Navi M-i (Optional: OSP-P300M only)

Cutting condition search for milling

■ Adjust cutting conditions while monitoring the dataBased on the chatter noise captured by the microphone, Machining Navi displays a number of optimal spindle speed possibilities on the screen. The operator can change to the indicated spindle speed with a single touch and immediately con�rm the result.

Machining Navi M-g (Optional: OSP-P300M only)

Cutting condition search for milling

Chatter

Select and con�rm any of anumber of possible spindlespeeds with a single touch

Machining NaviON

Machining NaviOFF

Machining Navi(OSP) provides the

answer!

This sign indicates a change to the optimum spindle speed.

This sign indicates that spindle speed is being changed.

This sign indicates that the cutting load needs to be reduced.

(Optional: OSP-P300M only)

Thermo-Friendly Concept

Collision Avoidance System Machining Navi

7 8

Communication

Getting the best from human operators and advanced machine tools

Human-machineinteraction

Okuma Control OSP-P300M Interactive operations for machining centers (Optional) Advanced One-Touch IGF-M

Satisfaction from complete control of a machine toolAs a “machine & control” builder, Okuma makes further strides in machine tool manufacturing with

this superb control featuring "Easy Operation." Okuma took a close look at the way machinists

actually operate machine tools, to help them create smoother and more effective ways of producing

parts. Novice operators as well as professional machinists get complete control—and satisfaction.

Moreover, what you want to see and do conveniently come together in a “single-mode operation.”

First, select one of three operation screens. Then simply touch the screen or press a function key to

see and do your job.

With spreadsheet simplicity —tool offsets, tilt, shape, life, etc—all the tool data required to cut a part can be registered here.Since the registered tool data is also used by Okuma auto programming (Advanced One-Touch IGF) and a collision check function (Collision Avoidance System), this screen will complete the entire registering process.

The touch sensor screen pops up from the tool registration screen. Tool compensation values are set while looking at a guidance message.

Easy tool registration

Machining processes can be newly added or revised on the Machining Order Table. Each process can be set freely with tool units, and know-how can be input with the edit function with a high degree of freedom. The recommended value is automatically set when new additions are made.

■ The objective: simple programming

■ Tool path, cutting conditions...

■ Approach/relief, cutting depth movement

Key items changed directly on Machining Order Table

Details are established in window

Processes can be added or have their order changed for each tool

on the Machining Order Table

Can be operated directly from Machining Order Table.When a problem is detected it can be quickly corrected and checked, speeding up �rst part machining.

Selectedoverall

Selectedrange

Mid-/singlecycle start

Tool path, cutting conditions... Approach/relief, cutting depth movement

■ Simple operations for 1st part machining jobs

Mid-/single cycle start by simply selecting target on Machining Order Table

Immediate editing from Machining Order Table

■ Setup operations

■ Trial/continuous cuts■ Programming ■ Tool preparations

9 10

Tank removal



MachiningNavi

� Machine Specifications

� Spindle torque/output graphs

� Dimensional drawing/Installation drawing

Vertical Machining Center


[ ] : Optional

Travels

Table

Spindle

Feedrate

Motors

ATC

Machine size

Control

X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindle

Tool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight

mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)mm (in.)kg (lb)

mm (in.)min-1

mm (in.)m/min (fpm)

mm/min (ipm)

kW (hp)

toolmm (in.)mm (in.)kg (lb)

mm (in.)mm (in.)kg (lb)

No. 50 SpecsMILLAC 468V

No. 40 Specs

60 to 6,000

7/24 taper No. 50ø90 (3.54)

OSP 18.5/11 (25/15) (15%ED/cont)FANUC 18.5/11 (25/15) (40%ED/cont)

20 (44)

50 to 15,000

7/24 taper No. 40ø70 (2.76)

OSP 26/18.5 (35/25) (10 min/cont)FANUC 22/18.5 (30/25) (15 min/cont)

10 (22)

820 (32.28)460 (18.11)450 (17.72)

150 to 600 (5.91 to 23.62) 1,050 × 460 (41.34 x 18.11)

930 (36.61)500 (1,100)510 (20.08)

Stepless (integral motor/spindle)

X-Y: 32, Z: 24 (X-Y: 105, Z: 79 )X-Y-Z: 15,000 (591)

20 [30]ø120/ø150 (ø4.72/ø5.91)

350 (13.78)

2,790 (109.84)OSP: 2,265 × 2,805 (89.17 x 110.43), FANUC: 2,200 × 2,780 (86.61 x 109.45)

6,000 (13,200)OSP-P300M, FANUC 31i-B

UnitItem

No. 50 6,000 min-1 spindle (OSP)Maximum output: 18.5/11 kW (15%ED/cont)Maximum torque: 326/175 N-m (15%ED/cont)

No. 50 6,000 min-1 spindle (FANUC)Maximum output: 18.5/11 kW (40%ED/cont)Maximum torque: 326/175 N-m (15%ED/cont)

No. 40 15,000 min-1 spindle (OSP)Maximum output: 26/18.5 kW (10 min/cont)Maximum torque: 199/146 N-m (10 min/cont)

Spindle speed min-1

11 kW (cont)

18.5 kW (cont)

15 kW (10 min)26 kW (10 min)

100

720 2,500 4,000

15,000

50 500 1,000 5,000 10,000

100

500

1,000

10

100

50

10

5

1

146 N-m (cont)

199 N-m (10 min)

Spindle speed min-1

18.5 kW (15%ED)

11 kW (cont)

7.5 kW (cont)

100

60 410

785

1,150 6,000

50 500 1,000 5,000

100

500

1,000

10

100

50

10

5

1

175 N-m (cont)

91 N-m (cont)326 N-m (15%ED)

154 N-m (15%ED)

Spindle speed min-1

18.5 kW (40%ED)

7.5 kW (15%ED)

5.5 kW (cont)

100

60 220 425

300 850 3,250

3,000 6,000

50 500 1,000 5,000

100

500

1,000

10

100

50

10

5

1

175 N-m (cont)

124 N-m (cont)326 N-m (15%ED)

208 N-m (40%ED)

11 kW (cont)

14 kW (15%ED)

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

2,51

0

2,060 (81.10)90

(3.54)

415

835

535

105

2,200 (86.61)

830

640 (25.20)175 (6.89)

3,015 (118.70)

210

[140

]

(8.2

7 [5

.51]

)

295

[270

]

3,01

5 [2

,920

] (11

8.70

[114

.96]

)

2,80

5 [2

,780

] (82

.09

[109

.45]

)

2,805 [2,780] (82.09 [109.45])120 (4.72)2,510 (98.82)

46050 to 510

295 [270](11.61 [10.63])

(Y-axis travel 460)

85

510

510 (20.08)

1,26

0 (4

9.61

)93

0 (3

6.61

)15

0 (5

.91)

2,79

0 (1

09.8

4)

840

(33.

07)

450

(17.

72)

Z-a

xis

trav

el

855 (33.66) (door opening)

410X-axistravell

2,37

0 (9

3.31

)

2,265 [2,200] (89.17 [86.61] )2,200 (86.61)

1,050

65 [0]

No. 50 6,000 min-1,OSP-P300M specs[ ]: FANUC specs

Electrical wiring inlet 3-ø42 hole (H = 850 from §oor) (Electric cabinet bottom face)

Air intake Rc 3/8(H = 1,295 from §oor)

Foundation blocks (6)

(coolant tank removal dimensions)

410 (16.14)X-axis travel

11 12

CNC

Spindle speed

Spindle nose constraint

Spindle cooling system

ATC magazine

ATC air blower

Full-enclosure

Slideway lubricating equipemnt

OSP-P300M

FANUC 31i-B

60 to 6,000 min-1 No. 50

Spindle motor 18.5/11 kW

50 to 15,000 min-1 No. 40

Spindle motor 26/18.5 kW (OSP)

22/18.5 kW (FANUC)

BIG-PLUS® (No. 50)

Oil controller

20 tools

With ceiling

Specifications Remarks

In-machine conveyor

Chip pan

Coolant supply system

Coolant nozzle

Work lamp

Spindle air curtain

Air cleaner (�lter)

Door interlock

Pulse handle

Electronic buzzer

Foundation blocks / Jack bolts

Tool / Tool box

Tool release lever

Gutter: Coil type (1 each left and right)

Tank: 200 L, Pump motor: 180 W

3 �exible nozzles

LED

Including regulator

Single axis, switchable

At operation end and alarm times

Hand tools

Specifications Remarks

Specifications Remarks Specifications Remarks

■ Max tool size (adjacent tools)

■ Maximum tools used (w/o adjacent tools)


■ Maximum tools used (w/o adjacent tools)

No.40 No.50

ø150

(ø5.

91)

ø44.

45(ø

1.75

)

350 (13.78)

(*1)

ø120

(ø4.

72)

ø44.

45(ø

1.75

)

350 (13.78)

35 (1.38)

35 (1.38)

ø63

(ø2.

48)

(*1)

ø120

(ø4.

72)

ø69.

85(ø

2.75

)

350 (13.78)

50 (1.97)

50 (1.97)

ø100

(ø3.

94)

(*1)

ø69.

85(ø

2.75

)

(*1)

ø150

(ø5.

91)

350 (13.78)

80(3

.15)

80(3

.15)

100

(3.9

4)10

0(3

.94)

100

(3.9

4)

1,050 (41.34)

460

(18.

11)

30 (1.18)

T-slot detail

18H8

20(0

.79)

12(0

.47)46

0 (1

8.11

)460 (18.11) 125 8522 (0.87)

SpindleZ-axis Slide Cover

Z-axis slideway

Table

482 (18.98)

Z-ax

is tr

avel

450

150

(17.

71)

(5.9

1)

Inside of full enclosureshielding

Inside of full enclosureshielding

Outside of full enclosureshielding

585 (23.03)

Spindle

X-axis travel 410140 X-axis travel 410

Z-ax

is tr

avel

450

150

(5.9

1)

[350

](1

3.78

)(1

7.71

)

Table

1401,050 (41.34)

[ ]: High column specs

■ Machining Capacity ■ Maximum tool dimensions

■ Table size

■ Working range

■ Standard Specifications · Accessories

■ Optional Specifications · Options

(Material : S45C)

Tool

ø125 face mill8 blades

148 (485.59)360 (21.98) 800 (31.50)5 (0.20) 90 (3.54)

Cutting Capacity(cm3/min) (in3/min)

Cutting Speed(m/min) (fpm)

Feedrate(mm/min) (ipm)

Cutting Depth(mm) (in.)

Cutting Width(mm) (in.)

No.50 Spindle 6,000 min-1

integral motor

Data listed in the catalog are actual data. These values may not be obtained depending on speci�cations, tooling, and cutting conditions and other factors.

0.5 MPa, 1.5 MPa

Okuma pull stud for 1.5 MPa, 1.5 MPa

large capacity, and 7 MPa required.

3-axis round handle, 3-axis round handle +

1-axis mobile type switch

OSP has synchronized tapping

Oil pan: chip �usher type

Hinge conveyor, scraper conveyor

See recommended chip conveyor speci�cations, P4.

Tilt with/without

20 mm

BIG-PLUS® (No. 40)

NC, tilt, indexing

+ 200 mm, including full enclosure

shielding for high columns

30 tools (both No. 40, No. 50)

1,050 × 460 × 70 mm

X-Y-Z axis

X-Y-Z axis

Infrared communication type

Touch type

Forms set together with below options.

High column 200 mm

Pallet size 820 × 460 mm

Tap pallet, T-slot pallet

Hydraulic unit (APC drive)

ATC magazine

Sub table

Reference tool

Ring gauge

AbsoScale detection (OSP)

Scale feedback (FANUC)

Auto gauging, auto zero offset

Auto tool lengh compensation/auto

tool breakage detection function

TAS-S: Thermo Active dimension

Stabilizer – Spindle (OSP)

TAS-C: Thermo Active dimension

Stabilizer – Construction (OSP)

Spindle thermal deformation

compensation (FANUC)

Ambient thermal deformation


Rotary 2-pallet APC

Status indicator

Chip air blower

Auto power shut-off

Oil-hole coolant system

Thru-spindle coolant

Thru-spindle semi-dry device

Auto open/close front cover

Pulse handle

Rigid tapping

In-machine chip discharge

Off-machine chip

discharge

Chip bucket

Raised machine

Angle head preps

Manual clamp �xture

Hydraulic and pneumatic �xtures


Rotary table

High column

(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.Always be sure to check dimensions in tooling catalogues or other literature.

Y-axistravel 230

(9.06) (9.06) (4.92) (3.35) (5.51) (5.51)(16.14) (16.14)

Y-axistravel 230

13 14



MachiningNavi

■ Machine Specifications

■ Spindle torque/output graphs

■ Dimensional drawing/Installation drawing



[ ] : Optional

No. 50 6,000 min-1 No. 50 10,000 min-1

MILLAC 561VNo. 40 12,000 min-1

30 to 6,0002 ranges

15/11 (20/15) (30 min/cont)

2,755 (108.46)

7/24 taper No. 50ø100 (3.94)

20 [30, 40]ø120/ø150 (ø4.72/ø5.91)

350 (13.78)20 (44)

80 to 12,000

7/24 taper No. 40ø70 (2.76)

20 [40]ø90/ø115 (ø3.54/ø4.53)

300 (13.78)8 (11)

2,825 (111.22)

1,050 (41.34)560 (22.05)520 (20.47)

170 to 690 (6.69 to 27.17)1,350 × 560 (53.15 x 22.05)

950 (37.40)1,000 (2,200)590 (23.23)

60 to 10,000

X-Y: 32, Z: 24 (X-Y: 105, Z: 79) X-Y-Z: 15,000 (591)

2,930 (115.35)2,650 × 3,285 (104.33 × 129.33)

7,000 (15,400)OSP-P300M, FANUC 31i-B


22/18.5 (30/25) (15 min/cont)

Travels

Table

Spindle

Feedrate

MotorsATC

Machine size

Control

X axis (table R/L)Y axis (table F/B)Z axis (spindle U/D)Table top to spindle noseWork surfaceFloor to table topMax load capacityColumn to spindle centerSpindle speedSpeed rangesTapered boreBearing diaRapid traverseCutting feedrateSpindleTool storageMax tool dia (w, w/o adj tool)Max tool lengthMax tool weightHeightFloor spaceWeight

UnitItem


mm (in.)min-1

mm (in.)m/min (fpm)

mm/min (ipm)kW (hp)



No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 15/11 kW (30 min/cont)Maximum torque: 376/276 N-m (30 min/cont)

No. 50 10,000 min-1 spindle (OSP)Maximum output: 23.7/18.5 kW (3 min/cont)Maximum torque: 205/125 N-m (3 min/cont)

No. 50 10,000 min-1 spindle (FANUC)Maximum output: 22/18.5 kW (15 min/cont)Maximum torque: 204/119 N-m (25%ED/cont)

10060

865 1,200 3,500

500 1,000 5,000

100

10

10

5

1

10,000

22 kW (15 min)

18.5 kW (15 min)

15 kW (cont)

18.5 kW (cont)

2,500

204 N-m (25%ED)147 N-m (15 min)

119 N-m (cont)

276 N-m (cont)

376 N-m (30 min)

15 kW (30 min)

11 kW (cont)

30 100

381 1,348 1,696

500 1,000 5,000

100

10

10

5

1

6,000

60 100

1,100 2,000

500 1,000 5,000

100

10

10

5

1

23.7 kW (3 min)

10,000

205 N-m (3 min)151 N-m (15 min)

125 N-m (cont)

22 kW (15 min)

17.5 kW (15 min)

14.5 kW (cont)18.5 kW (cont)

1,500

500

1,000 100

50 500

1,000 100

50 500

1,000 100

50

Spindle speed min-1Spindle speed min-1 Spindle speed min-1

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Air intake Rc 3/8 0.5MPa(H = 1,420 from §oor)

No. 50 6,000 min-1 specs

480(18.90)2,650 (104.33)

3,130 (123.23)

1,000

790210

1,140

165

(6.5

0)2,

235

(87.

99)

215

(8.4

6)1,

130

(44.

49)

695

(27.

36)

195

(7.6

8)

Jack bolt (6 locations)

205

(8.07

)3,

490

(137

.40)

3,28

5 (1

29.3

3)

2,96

0

1,10

510

0(3

.94)

80

250(9.84)

500(19.69)

575(22.64)

1,75

5

325

325(12.80)

950

(37.

40)

170

to 6

90(Z-

axis

trave

l 520

)1,

115

(43.

90)

2,75

5 (1

08.4

6)

560

Air unit

Coolant tank

50 to 610(Y-axis travel 560)

2,960 (116.54)

3,285 (129.33)

X-axis travel525 1,350

2,650 (104.33)

X-axis travel525

1,325 (52.17)1,325 (52.17)

940

(37.

01)

915

(36.

02)

Operation panel

535 (21.06)1,000 (39.37)1,115 (43.90)(door opening)

Electrical wiring inlet 3-ø42 hole (H = 935 from §oor) (Electric cabinet bottom face)

Tank removal

80

15 16

No. 50 spindle 6,000 min-1

2-speed gear headø125 face mill,

6 blades


integral motor (options)ø80 face mill,

6 blades


integral motor (options)ø100 face mill,

5 blades

252 (15.38)

588 (35.90)

350 (21.37)

120 (393.72)

250 (820.25)

170 (557.77)

7 (0.28)

5 (0.20)

5 (0.20)

90 (3.54)

56 (2.20)

70 (2.76)

400 (15.75)

2,100 (82.68)

1,000 (39.37)

CNC

Spindle speed



ATC magazine

ATC air blower

Full-enclosure


In-machine conveyor

Chip pan

OSP-P300M

FANUC 31i-B

30 to 6,000 min-1 No. 50

Spindle motor 15/11 kW

BIG-PLUS®

Oil controller

20 tools

With ceiling

Gutter: chip �usher type


Coolant nozzle

Work lamp

Spindle air curtain


Door interlock

Pulse handle

Electronic buzzer


Tool / Tool box

Tool release lever


3 �exible nozzles

LED

Including regulator



Hand tools

■ Max tool size (adjacent tools) ■ Maximum tools used (w/o adjacent tools)

No.50

350 (13.78)

ø100

(ø3.

94)

ø150

(ø5.

91)

(*1)

50(1.97)

50 (1.97) 350 (13.78)

ø100

(ø3.

94)

ø120

(ø4.

72)

(*1)

30 (1.18)

T-slot detail

18H8

20(0

.79)

12(0

.47)56

0 (2

2.05

)

1,350 (53.15)

80(3

.15)

80(3

.15)

100

(3.9

4)10

0(3

.94)

100

(3.9

4)10

0(3

.94)

560

(22.

05)

X-axis travel 525 X-axis travel 525

Table

1,350 (53.15)

Z-axis Slide Cover

Y-axistravel 280

(11.02) (11.02)27.5(1.08)

560 (22.05)

22.5(0.89)

Spindle

Z-axis slideway

Table20 (0.79)

590 (23.23)

Y-axistravel 280

Z-a

xis

trav

el 5

2017

0(2

0.47

)(6

.69)


Spindle

(20.

47)

(6.6

9)Z

-axi

s tr

avel

520

170

[370

](1

4.57

)




■ Table size

■ Working range





No. 50 integral motor/spindle

22/18.5 kW


22/18.5 kW

40 tools; 30 tools possible with No. 50 spindle only

Nozzle type

370 W

Ring type

Nozzle type

0.5 MPa, 1.5 MPa



Oil pan: oil pan washer

Gutter: Coil type, 1 each left and right



Tilt with/without

50 mm

Belt type

NC, slope, orientation

1,350 × 560 × 90 mm

+200 mm


Touch type

X-Y-Z axis

X-Y-Z axis


High column 200 mm

Pallet size 1,150 × 520 mm


Hydraulic unit (APC drive)

Reference tool

Ring gauge

Angle head preps



High column














Status lamp

Foundation bolt

Parallel 2-pallet APC

Spindle speed

10,000 min-1

Spindle speed

12,000 min-1

ATC magazine

Chip air blower

Coolant pump

Coolant nozzle

Semi-dry unit

Coolant level sensor

Coolant temperature regulator

Oil hole device


In-machine chip

discharge

Off-machine chip

discharge

Chip bucket

Raised machine

Workpiece washing gun

Air gun mount

Oil skimmer

Mist collector

Auto open/close front cover

Rotary table

Sub table

ø69.

85(ø

2.75

)

ø69.

85(ø

2.75

)

(20.67) (20.67)

ToolCutting Capacity

(cm3/min) (in3/min)Cutting Speed(m/min) (fpm)




(Material : S45C)

17 18

This operation panel is standard.



MachiningNavi






No. 50 6,000 min-1No. 50 4,000 min-1

MILLAC 611VNo. 40 15,000 min-1No. 50 12,000 min-1

20 to 4,0002 ranges

ø100 (3.94)

15/11 (20/15) (30 min/cont)

3,410 × 3,695 (134.25 x 145.47)

50 to 15,000

7/24 taper No. 40ø70 (2.76)

ø115/ø115 (ø4.53/ø4.53)300 (11.81)

8 (11)

1,300 (51.18)610 (24.02)560 (22.05)

200 to 760 (7.87 to 29.92)1,600 × 610 (62.99 × 24.02)

900 (35.43)1,500 (3,300)650 (25.59)

X-Y: 20, Z: 16 (X-Y: 66, Z: 52)X-Y-Z: 10,000 (394)

20 [30, 42]

2,910 (114.57)

9,300 (20,460)OSP-P300M, FANUC 31i-B

50 to 12,000

ø90 (3.54)

30 to 6,000

7/24 taper No. 50

ø120/ø150 (ø4.72/ø5.91)400 (15.75)

20 (44)


OSP:26/18.5 (35/25) (10 min/cont)FANUC:22/18.5 (30/25) (15 min/cont)

3,410 × 3,525 (134.25 x 138.78)

[ ] : Optional

Travels

Table

Spindle

Feedrate

Motors

ATC

Machine size

Control




mm (in.)min-1

mm (in.)m/min (fpm)

mm/min (ipm)

kW (hp)



UnitItem



276 N-m (cont)

376 N-m (30 min)

15 kW (30 min)

11 kW (cont)

30

100

381 1,348 1,696

50 500 1,000 5,000

100

10

10

5

1

6,000


11 kW (cont)

18.5 kW (cont)

15 kW (10 min)26 kW (10 min)

100

720 2,500 4,000

12,000

50 500 1,000 5,000 10,000

100

500

10

50

10

5

1

146 N-m (cont)

199 N-m (10 min)376 N-m (cont)

512 N-m (30 min)

15 kW (30 min)

11 kW (cont)

50

100

28020

899

4,0001,246

50 500 1,000 5,000

100

500

10

10

1

1,000 100 1,000 100 1,000 100

50500


Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

2,18

5 (8

6.02

) (b

ed le

ngth

)

255

(10.

04)

1,11

0(4

3.70

)71

5(2

8.15

)35

(1.3

8)

70 (2

.76)

310

(12.

20)

650

(25.

59)

Leveling block

3,69

5 (1

45.4

7)

1,87

5 (7

3.82

)1,

100

(43.

31)

(5.5

1)14

0

80(3

.15)

30 (1

.18)

3,14

5 (1

23.8

2)55

0(2

1.65

)

790315 420

526(20.71)

620(24.41)

710(27.95)

1,350 (bed width)

Electrical wiring inlet ø42 hole (H = 920 from ¦oor)

1,250

3,410 (134.25) 160 (6.30)

3,570 (140.55)

3,695 (145.47)3,145 (123.82)

550(21.65)

2,495650

650

610

2,84

0 (1

11.8

1)

2,91

0 (1

14.5

7)

2,76

0

2,74

020

(0.7

9)88

0

60 to670

200

to 7

60(Z

-axi

s tr

avel

560

)



1,415 (55.71) (door opening)

3,410 (134.25)

1,600 (62.99)

No. 50 4,000/6,000 min-1 specs

(Electric cabinet bottom face)

Tankremoval

Air intake Rc 3/8(H = 1,200 from ¦oor)

19 20

304 (18.56) 120 (393.72) 675 (26.57)5 (0.20) 90 (3.54)■ Max tool size (adjacent tools) ■ Maximum tools used (w/o adjacent tools)

No.50

50(1.97)

400 (15.75)

ø150

(ø5.

91)ø6

9.85

ø100

(ø3.

94)

50 (1.97)(35) (1.38)

400 (15.75) (300) (11.81)

(ø4.

72)

ø120

(ø11

5)(ø

4.53

)

(ø3.

94)

ø100

(ø63

)(ø

2.48

)

(ø2.

75)

(ø2.

75)

ø69.

85

(ø44

.45)

(ø1.

75)

(*1)(*1)

85 (3.3

5)85 (3.3

5)11

0(4

.33)

110

(4.3

3)11

0(4

.33)

110

(4.3

3)

1,600 (62.99)

610

(24.

02)

45 (1

.77)

655

(25.

79)

610

(24.

02)

30 (1

.18)

15 (0

.59)

30(1.18)

T-slot detail

18H8

20(0

.79)

12(0

.47)

Spindle

X-axis travel 650(25.59)

X-axis travel 650(25.59)

Table

1,600(62.99)

Y-axis travel 610(24.02)

60(2.36)

610(24.02)

30 (1.18)

Z-axis Slide Cover

Z-axis slideway

Table20 (0.79)

650 (25.59)

Z-a

xis

trav

el 5

60(2

2.05

)(7

.87)

200

(400

)(1

5.75

)

Z-a

xis

trav

el 5

60(2

2.05

)(7

.87)

200

[400

](1

5.75

)




■ Table size

■ Working range



Speci�cations in parentheses are No. 40 (15,000 min-1 specs). Same without adjacent tool.(*1): Interference with outer part of ATC tool change arm and tooling may occur with commercially available milling chucks, etc.

Always be sure to check dimensions in tooling catalogues or other literature.


2-range gear headø125 face mill,

6 blades

No. 50 2-speed gear head 15/11 kW


26/18.5 kW (OSP)

22/18.5 kW (FANUC)


26/18.5 kW (OSP)

22/18.5 kW (FANUC)

30 tools, 42 tools

Nozzle type

370 W

Ring type

Nozzle type

0.5 MPa, 1.5 MPa



Coil-type chip conveyor Table rear

Oil pan part



BIG-PLUS®

No. 50 12,000 min-1

No. 40 15,000 min-1

Tilt with/without

100 mm

NC, slope, orientation

1,600 × 610 × 90 mm

+200 mm


Touch type

X-Y-Z axis

X-Y-Z axis


High column 200 mm



Chip bucket

Raised machine


Air gun mount

Angle head preps



Oil skimmer

Mist collector

Rotary table

Sub table

High column




Main operating panel

pendant type



Status lamp

Foundation bolt


Spindle speed

6,000 min-1

Spindle speed

12,000 min-1

Spindle speed

15,000 min-1

ATC magazine

Chip air blower

Coolant pump

Coolant nozzle

Semi-dry unit


Coolant temperature regulator

Oil hole device



In-machine chip üshing

speci�cations

Off-machine chip

discharge




OSP-P300M

FANUC 31i-B

20 to 4,000 min-1 No. 50 (2-range gear drive)

Spindle motor 15/11 kW (30 min/cont)

BIG-PLUS®

(No.50 4,000, 6,000 min-1 specs)

Oil controller

20 tools

With ceiling


3 ëxible nozzles

LED

CNC

Spindle speed



ATC magazine

ATC air blower

Full-enclosure


Chip pan


Coolant nozzle

Work lamp

Spindle air curtain

Including regulator



Hand tools


Door interlock

Pulse handle

Electronic buzzer


Tool / Tool box

Tool release lever

Bed-mounted operation panel














(Material : S45C)

21 22



MachiningNavi






No. 50 6,000 min-1No. 50 4,000 min-1


20 to 4,0002 ranges

ø100 (3.94)

18.5/15 (25/20) (30 min/cont)

50 to 15,000

7/24 taper No. 40ø70 (2.76)

ø115/ø115 (ø4.53/ø4.53)300 (11.81)

8 (11)

1,540 (60.63)760 (29.92)660 (25.98)

200 to 860 (7.87 to 33.86)1,800 × 720 (70.87 x 28.35)

1,030 (40.55)2,000 (4,400)800 (31.50)

X-Y-Z: 16 (52)X-Y-Z: 10,000 (394)

36 [54]

3,230 (127.17)4,300 × 4,060 (169.29 x 159.84)

12,500 (27,500)OSP-P300M, FANUC 31i-B

50 to 12,000

ø90 (3.54)



30 to 6,000

7/24 taper No. 50

ø120/ø200 (ø4.72/ø5.91)400 (15.75)

20 (44)

[ ] : Optional

Travels

Table

Spindle

Feedrate

Motors

ATC

Machine size

Control




mm (in.)min-1

mm (in.)m/min (fpm)

mm/min (ipm)

kW (hp)



UnitItem

No. 50 4,000 min-1 spindle (OSP, FANUC)Maximum output: 18.5/15 kW (30 min/cont)Maximum torque: 587/476 N-m (30 min/cont)



11 kW (cont)

18.5 kW (cont)

15 kW (10 min)26 kW (10 min)

100

720 2,500 4,000

12,000

50 500 1,000 5,000 10,000

100

500

10

50

10

5

1

146 N-m (cont)

199 N-m (10 min)18.5 kW (30 min)

15 kW (cont)

100

301 1,33920

899

4,000

50 500 1,000 5,000 10,000

100

500

1,000

10

100

50

10

5

1

476 N-m (cont)

587 N-m (30 min)

18.5 kW (30 min)

15 kW (cont)

100

367 1,63430

1.348

6,000

50 500 1,000 5,000 10,000

100

500

1,000

10

100

50

10

5

1

390 N-m (cont)

481 N-m (30 min)1,000 100

2,38

0 (9

3.70

) (be

d bo

ttom

leng

th)

ATC 36 tool spec

ATC 54 tool(Option)

650

(25.

59)

480

(18.

90)

770

(30.

31)

1,07

0(4

2.13

)35

(1.3

8)

70(2

.76)

400

(15.

75)

Door opening

1,710 (bed bottom width)

1,880 (door opening)Table outline with Y axis at forwardmost part

210

4,790 (188.58)

4,300 (169.29)490(19.29)

820 82035

190

525(20.67)680 (26.77)1,830 (72.05)

285475475285

60

(ATC

54 to

ols sp

ec)

890

(35.

04)

4,06

0 (1

59.8

4)3,

510

2,15

01,

150

170

8040

4,95

0 (1

94.8

8) (A

TC 5

4 to

ols

spec

)

60

550

(21.

65)

720

430

35(1

.38)

35

3,23

0 (1

27.1

7)

380Y-axis travel

660

(25.

98)

Z-ax

is tr

avel

2,380 (bed bottom length)650

4,950 (194.88) (ATC 54 tools spec)

3,510

800

720

890 (35.04) 4,060 (159.84)

Removable chip bucket(w/casters)

490(19.29)

120

(4.7

2)91

0 (3

5.83

)

200

(7.8

7)18

558

043

0

480

Status lamp

550

770X-axis travel

770X-axis travel

1,710 (bed bottom width)

1,800 (table)

1,880 (door opening)

4,300 (169.29)

4,790 (188.58)

No. 50 4,000/6,000 min-1 specs Electrical wiring inlet ø42 hole (H = 1,125 from ¦oor) (Electric cabinet bottom face)

ATC 54 tools(Option)

ATC 36 tools

(ATC 54 tools spec)

Tankremoval

Air intake Rc 3/8(H = 1,460 from ¦oor)


Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

23 24

540 (32.96)

485 (29.61)

252 (15.38)

252 (15.38)

165 (541.37)

165 (541.37)

25 (82.03)

25 (82.03)

1,200 (47.24)

770 (30.31)

210 (8.27)

210 (8.27)

5 (0.20)

7 (0.28)

40 (1.57)

30 (1.18)

90 (3.54)

90 (3.54)

30 (1.18)

40 (1.57)

OSP-P300M

FANUC 31i-B

4,000 min-1 No. 50 (2-speed gear head)


BIG-PLUS

(No. 50 4,000, 6,000 min-1 specs)

Oil controller

36 tools

With ceiling



3 �exible nozzles

LED


No.50

ø100

(ø3.

94)

ø120

(ø4.

72)

50(1.97) 400 (15.75)

ø69.

85(ø

2.75

)

(*1)

ø100

(ø3.

94)

ø200

(ø7.

87)

ø69.

85(ø

2.75

)

50(1.97) 400 (15.75)

(*1)

1,800 (70.87)

720

(28.

35)

85 (3

.35)

45 (1

.77)

30(1.18)

T-slot detail

18H8

20(0

.79)

12(0

.47)76

5 (3

0.12

)

45 (1

.77)

720

(28.

35)

Y-axis trave380

720 (28.35)

765(30.12)

(30.31) (30.31)

(14.96) (14.96)

55 (2.17)

800 (31.50)

60(2.36)

Column slideway

Z-a

xis

trav

el 6

60(2

5.98

)

(25.

98)

Z-axis Slide Cover


Table

1,800 (70.87)X-axis travel 770 X-axis travel 770

Z-a

xis

trav

el 6

60

Y-axis trave380

Table




■ Table size

■ Working range



Data listed in the catalog are actual data. These values may not be obtained depending on speci¥cations, tooling, and cutting conditions and other factors.



2-range gear head


ø40 roughingend mill

No. 50 2-speed gear head

18.5/15 kW


26/18.5 kW (OSP)

22/18.5 kW (FANUC)


26/18.5 kW (OSP)

22/18.5 kW (FANUC)

54 tools

Ring type

Nozzle type

Pump motor : 550 W

0.5 MPa, 1.5 MPa



Oil pan part


See recommended chip conveyor speci¥cations, P4.

BIG-PLUS®

No. 50 12,000 min-1

No. 40 15,000 min-1

Tilt with/without

100 mm

Belt type

NC, tilt, indexing

1,800 × 720 × 100 mm

+200 mm


Touch type

X-Y-Z axis

X-Y-Z axis


High column 200 mm



Raised machine


Air gun mount

Angle head preps

Manual clamp ¥xture

Hydraulic and pneumatic ¥xtures

Oil skimmer

Mist collector

Rotary table

Sub table

Reference tool

Ring gauge

High column






Status lamp

Foundation bolt


Spindle speed

6,000 min-1

Spindle speed

12,000 min-1

Spindle speed

15,000 min-1

ATC magazine

Chip air blower

Coolant nozzle

Semi-dry unit


Coolant supply systems

Oil hole device


In-machine chip �ushing

speci¥cations

Off-machine chip

discharge


Chip bucket

CNC

Spindle speed



ATC magazine

ATC air blower

Full-enclosure


In-machine conveyor

Chip pan


Coolant nozzle

Work lamp

Spindle air curtain

Air cleaner (¥lter)

Pulse handle

Electronic buzzer


Tool / Tool box

Tool release lever









Including regulator



Hand tools

(3.35

)(3.

35)

(4.33

)(4.

33)

(4.33

)(4.

33)(

4.33

)85

8511

011

011

011

011

0

(7.8

7)20

0

[400

](1

5.75

)

(7.8

7)20

0

[400

](1

5.75

)






(Material : S45C)

®

25 26



MachiningNavi




< >: X-axis travel 3,050 specs [ ] : Optional



No. 50 6,000 min-1No. 50 4,000 min-1


20 to 4,000 50 to 15,000

7/24 taper No. 40ø70 (2.76)

ø115/ø115 (ø4.53/ø4.53)300 (11.81)

8 (11)

2,050 <3,050> (80.71 <120.08>)850 (33.46)750 (29.53)

200 to 950 <160 to 910> (7.87 to 37.40 <6.30 to 35.83>2,200 <3,200> × 850 (86.61 <125.98> × 33.46)

1,060 <1,100> (41.73 <43.31>)2,500 <3,800> (5,500 <8,360>

900 (35.43)

X-Y-Z: 16 <X-Y: 12, Z: 16> (X-Y-Z: 52 <X-Y: 39, Z: 52>)X-Y-Z: 10,000 (394)

36 [54]

5,460 × 4,445 <7,460 × 4,445> (214.96 × 175 <293.70 × 175>)15,000 <18,500> (33,000 <40,700>)

OSP-P300M, FANUC 31i-B

50 to 12,000

ø90 (3.54)

30 to 6,000

7/24 taper No. 50

ø120/ø200 (ø4.72/ø7.87)400 (15.75)

20 (44)


2 ranges

ø100 (3.94)

18.5/15 (25/20) (30 min/cont)

3,350 (131.89)



3,320 (130.71)

Travels

Table

Spindle

Feedrate

Motors

ATC

Machine size

Control




mm (in.)min-1

mm (in.)m/min (fpm)

mm/min (ipm)

kW (hp)



UnitItem

No. 50 4,000 min-1 (OSP, FANUC)Maximum output: 18.5/15 kW (30 min/cont)Maximum torque: 587/476 N-m (30 min/cont)



11 kW (cont)

18.5 kW (cont)

15 kW (10 min)26 kW (10 min)

100

720 2,500 4,000

12,000

50 500 1,000 5,000 10,000

100

500

10

50

10

5

1

146 N-m (cont)

199 N-m (10 min)18.5 kW (30 min)

15 kW (cont)

100

301 1,33920

899

4,000

50 500 1,000 5,000 10,000

100

500

1,000

10

100

50

10

5

1

476 N-m (cont)

587 N-m (30 min)

18.5 kW (30 min)

15 kW (cont)

100

367 1,63430

1.348

6,000

50 500 1,000 5,000 10,000

100

500

1,000

10

100

50

10

5

1

390 N-m (cont)

481 N-m (30 min)1,000 100


Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Air intake Rc 3/8(H = 1,360 from §oor)

640

(25.

20)

2,83

5(1

11.6

1)42

0(1

6.54

)

45(1

.77)

1,08

0(4

2.52

)18

5(7

.28)

597.

5(2

3.52

)60

2.5

(23.

72)

255

(10.

04)

70 (2.7

6)

745(29.33)

605(23.82)

520(20.47)

1901,060 (41.73)75 (2.95) 75 (2.95)

235

705

(27.

76)

5,780 (227.56)

5,460 (214.96)

2,500

1,290

320(12.60)

1,290

8050

1,15

02,

460

3,89

573

0

4,62

5 (1

82.0

9)

550

5,33

0 (2

09.8

4) (A

TC 5

4 to

ols

spec

)

280

780

1,34

0850

2,200

850 (table)70 to 920(Y-axis travel 850)

5,150 (202.76) (ATC 54 tools spec)(ATC 54 tools spec)705 (27.76)

2,605650 640

3,895

4,445 (175)

550

200

to 9

50(Z

-axi

s tr

avel

750

)

Table top

3,35

0 (1

31.8

9)

3,23

0 (1

27.1

7)12

0 (4

.72)

900 20

940

1,025X-axis travel

1,025X-axis travel

2,500 (door opening)

5,460 (214.96)

2,650

1,290 1,4401,440 1,290

5,780 (227.56)

320(12.60)

2,200 (table)

No. 50 4,000/6,000 min-1, X-axis travel 2,050 specs

ATC 54 tool(Option)

Electrical wiring inlet ø42 hole (H = 1,140 from §oor) (Electric cabinet bottom face)

(ATC

54 to

ols sp

ec)

Door opening Table outline with Y axis at forwardmost part Removable chip bucket(w/casters)

Removable chip bucket(w/casters)

ATC 54 tools(Option)

ATC 36 tools

Status lamp

Tank removalTank removal

27 28

OSP-P300M

FANUC 31i-B



BIG-PLUS®

(No. 50 4,000, 6,000 min-1 specs)

Oil controller

36 tools

With ceiling



3 �exible nozzles

( )


No.50

(*1)

ø200

(ø7.

87)

400 (15.75)

(*1)

2,200 (86.61) [3,200 (125.98)]

850

(33.

46)

95 (

3.74

)

T-slot detail

18H8

895

(35.

24)

850

(33.

46)

9511

011

011

011

011

011

095

2,200 [3,200]

Z-a

xis

trav

el 7

50

< >: High column specs [ ] specifications are X-axis travel 3,050 mm (120.08 in.) specs

Y-axis travel 425

20 (0.78)

900 (35.43)

70

[160]

200

([6.3

0])

(7.8

7)

Z-a

xis

trav

el 7

50Column slideway

Z-axis Slide Cover

<400 [360]

(15.75

)

([14.1

7])>

[160]

200

([6.3

0])

(7.8

7)

<400 [360]

(15.75

)

([14.1

7])>

34 (1.34)

Table

Table

X-axis travel 1,025 [1,525] X-axis travel 1,025 [1,525]895

850 (33.46) Y-axis travel 425




■ Table size

■ Working range



Data listed in the catalog are actual data. These values may not be obtained depending on speci¥cations, tooling, and cutting conditions and other factors.



2-range gear head




18.5/15 kW


26/18.5 kW (OSP)

22/18.5 kW (FANUC)


26/18.5 kW (OSP)

22/18.5 kW (FANUC)

54 tools

Ring type

Pump motor : 550 W

0.5 MPa, 1.5 MPa



Oil pan part


See recommended chip conveyor speci¥cations, P4.

BIG-PLUS®

No. 50 12,000 min-1

No. 40 15,000 min-1

Tilt with/without

100 mm

Belt type

NC, tilt, indexing

2,200 × 850 × 100 mm

+200 mm


Touch type

X-Y-Z axis

X-Y-Z axis


High column 200 mm



Raised machine


Air gun mount

Angle head preps

Manual clamp ¥xture

Hydraulic and pneumatic ¥xtures

Oil skimmer

Mist collector

Rotary table

Sub table

Reference tool

Ring gauge

High column






Status lamp

Foundation bolt


Spindle speed

6,000 min-1

Spindle speed

12,000 min-1

Spindle speed

15,000 min-1

ATC magazine

Chip air blower

Coolant nozzle



Oil hole device


In-machine chip �ushing

speci¥cations

Off-machine chip

discharge


Chip bucket

CNC

Spindle speed



ATC magazine

ATC air blower

Full-enclosure


In-machine conveyor

Chip pan


Coolant nozzle

Work lamp

Spindle air curtain

Air cleaner (¥lter)

Pulse handle

Electronic buzzer


Tool / Tool box









LED

Including regulator



X-axis travel2,050 mm speci¥cations only

ø69.

85(ø

2.75

)

ø69.

85(ø

2.75

)

50(1.97) 50

(1.97)400 (15.75)

ø100

(ø3.

94)

ø100

(ø3.

94)

ø120

(ø4.

72)

45 (1

.77)

(4.33

)(4.

33)

(4.33

)(4.

33)

(4.33

)(3.

74)

(3.74

)(4.

33)

45 (1

.77)

(35.24)(40.35 [60.04]) (86.61 [125.98]) (40.35 [60.04])

(16.73)(16.73)(2.76)

(29.

53)

(29.

53)

30(1.18)

20(0

.79)

12(0

.47)






540 (32.96)

485 (29.61)

252 (15.38)

252 (15.38)

165 (541.37)

165 (541.37)

25 (82.03)

25 (82.03)

1,200 (47.24)

770 (30.31)

210 (8.27)

210 (8.27)

5 (0.20)

7 (0.28)

40 (1.57)

30 (1.18)

90 (3.54)

90 (3.54)

30 (1.18)

40 (1.57)

(Material : S45C)

29 30



MachiningNavi






Large Vertical Machining Center

No. 50 6,000 min-1No. 50 4,000 min-1


50 to 15,000

7/24 taper No. 40ø70 (2.76)

ø115/ø115 (ø4.53/ø4.53)300 (11.81)

8 (11)

20 to 4,0002 ranges

ø100 (3.94)

22/18.5 (30/25) (30 min/cont)

2,050 <3,050> (80.71 <120.08>)1,060 (41.73)800 (31.50)

200 to 1,000 <160 to 960> (7.87 to 39.37 <6.30 to 37.80>)2,200 <3,200> × 1,050 (86.61 <125.98> × 41.34)

1,060 <1,150> (41.73 <45.28>)5,000 (11,000)1,100 (43.31)

X-Y-Z: 16 <X-Y: 12, Z: 16> (X-Y-Z: 52 <X-Y: 39, Z: 52>)X-Y-Z: 10,000 (394)

36 [54]

3,520 <3,570> (138.58 <140.55>)6,760 × 4,470 <9,065 × 4,495> (266.14 × 175.98 <356.89 × 176.67>)

24,000 <27,000> (52,800 <59,400>)OSP-P300M, FANUC 31i-B

50 to 12,000

ø90 (3.54)



30 to 6,000

7/24 taper No. 50

ø120/ø200 (ø4.72/ø7.87)400 (15.75)

20 (44)

Travels

Table

Spindle

Feedrate

Motors

ATC

Machine size

Control




mm (in.)min-1

mm (in.)m/min (fpm)

mm/min (ipm)

kW (hp)



UnitItem

No. 50 4,000 min-1 spindle (OSP, FANUC)Maximum output: 22/18.5 kW (30 min/cont)Maximum torque: 827/695 N-m (30 min/cont)

No. 50 6,000 min-1 spindle (OSP, FANUC)Maximum output: 22/18.5 kW (30 min/cont)Maximum torque: 511/430 N-m (30 min/cont)

22 kW (30 min)

18.5 kW (cont)

30

100

411 1,348 1,828 6,000

50 500 1,000 5,000

100

500

1,000

10

100

50

10

5

1

430 N-m (cont)

511 N-m (30 min)


11 kW (cont)

18.5 kW (cont)

15 kW (10 min)26 kW (10 min)

100

720 2,500 4,000

12,000

50 500 1,000 5,000 10,000

100

500

1,000

10

100

50

10

5

1

146 N-m (cont)

199 N-m (10 min)

695 N-m (cont)

827 N-m (30 min)

22 kW (30 min)

18.5 kW (cont)

20

100

254 899 1,129 4,000

50 500 1,000 5,000

100

500

1,000

10

100

50

10

5

1


Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Out

put

Torq

ue

N-m kW

Air intake Rc 3/8(H = 530 from §oor)

2,690 (105.91)5,460 (214.96)

1,100 1,100 205 (8.07)205(8.07)

1,625 (63.98)

4,20

0 (1

65.3

5)

2,87

0 (1

12.9

9)1,

330

(52.

36)

110

2,200

190(7.48)

965(37.99)

526(20.71)

1,015(39.96)

80(3

.15)

4,20

0 (1

65.3

5)

3,29

0 (1

29.5

3)52

0(2

0.47

)27

0(1

0.63

)39

0(15

.35)

1,52

02,

290

1,05

0

690

Z-ax

is tra

vel 8

00

605

1,06

3

940

200

3,40

0 (1

33.8

6)

3,52

0 (1

38.5

8)

2,200 (86.61) (table)X-axis travel 1,025

(40.35)X-axis travel 1,025

(40.35)

Drum ¨lter-typechip conveyor

2,46

0 (9

6.85

)

5,460 (214.96)

6,760 (266.14)

1,200 (4.72)

2,440 (96.06) (door hatching)

1,10

0 (4

3.31

)

120

(4.7

2)

4,470 (175.98)

60

4,200 (165.35)

1,10015

270(10.63)

3,070 390(15.35)

740

No. 50 4,000/6,000 min-1,X-axis travel 2,050 specs

Electrical wiring inlet(H = 1,140 from §oor)

Door openingTable outline with Y axis at forwardmost part

Y-axis travel530

Y-axis travel530Table width 1,050

Status lamp

Tankremoval

31 32

720 (43.96)

756 (46.15)

360 (21.98)

165 (541.37)

165 (541.37)

25 (82.03)

1,600 (62.99)

1,200 (47.24)

300 (11.81)

5 (0.20)

7 (0.28)

30 (1.18)

90 (3.54)

90 (3.54)

40 (1.57)


No.50■ Max tool size (adjacent tools)

38(1.50)

(*1)

ø100

(ø3.

94)

ø200

(ø7.

87)

ø69.

85(ø

2.75

)

50(1.97) 400 (15.75)

38(1.50)

(*1)

2,200 (86.61) [3,200 (125.98)]

1,05

0 (4

1.34

)13

5 (5

.31)

45 (1

.77)

T-slot detail

18H8

45 (1

.77)

1,09

5 (4

3.11

)

1,05

0 (4

1.34

)

130

130

130

130

130

130

135

135

2,200 [3,200]X-axis travel 1,025 [1,525] X-axis travel 1,025 [1,525]

Z-a

xis

trav

el 8

00

Y-axis travel 530

Y-axis travel 5301,050

1,100 (43.31)

15

60

Z-a

xis

trav

el 8

00Column slideway

Z-axis Slide Cover

< >: High column specs [ ] specifications are X-axis travel 3,050 mm (120.08 in.) specs

40 (1.57)

Table

Table



■ Table size

■ Working range





2-range gear head




22/18.5 kW


26/18.5 kW (OSP)

22/18.5 kW (FANUC)


26/18.5 kW (OSP)

22/18.5 kW (FANUC)

54 tools

Ring type

Pump motor : 550 W

0.5 MPa, 1.5 MPa



Hinge conveyor

Oil pan part


Scraper type (with drum �lter) conveyor

See recommended chip conveyor speci�cations, P4

BIG-PLUS®

No. 50 12,000 min-1

No. 40 15,000 min-1

Tilt with/without

NC, tilt, indexing

2,200 × 1,050 × 100 mm

+150 mm


Touch type

3-axis mobile type

X-Y-Z axis

X-Y-Z axis


High column 150 mm

Pallet size 2,200 × 1,020 mm


Chip bucket


Air gun mount

Angle head preps



Oil skimmer

Mist collector

Rotary table

Sub table

Reference tool

Ring gauge

High column




Pulse handle



Status lamp

Foundation bolt


Spindle speed

6,000 min-1

Spindle speed

12,000 min-1

Spindle speed

15,000 min-1

ATC magazine

Chip air blower

Coolant nozzle



Oil hole device



In-machine chip üshing

speci�cations

Off-machine chip

discharge


OSP-P300M

FANUC 31i-B


Spindle motor 22/18.5 kW

BIG-PLUS®

(No. 50 4,000, 6,000 min-1 specs)

Oil controller

36 tools

With ceiling



3 ëxible nozzles



CNC

Spindle speed



ATC magazine

ATC air blower

Full-enclosure


In-machine conveyor

Chip pan


Coolant nozzle

Work lamp

Spindle air curtain


Pulse handle

Electronic buzzer


Tool / Tool box









LED

Including regulator



( )X-axis travel2,050 mm speci�cations only

ø69.

85(ø

2.75

)

ø100

(ø3.

94)

50(1.97)

400 (15.75)

ø120

(ø4.

72)

(5.31

)(5.

31)

(5.12

)(5.

12)

(5.12

)(5.

12)

(5.12

)(5.

12) 30

(1.18)

20(0

.79)

12(0

.47)

(20.87) (20.87)(41.34)(2.36)

(0.59) [160]

200

([6.3

0])

(7.8

7) <350 [310]

(13.78

)

([12.2

0])>

(31.

50)

[160]

200

([6.3

0])

(7.8

7) <350 [310]

(13.78

)

([12.2

0])>

(31.

50)

(40.35 [60.04]) (40.35 [60.04])(86.61 [125.98])






(Material : S45C)

33 34

FANUC 31i-BOkuma Control OSP-P300MBasic Specs

Programming

Operations

High speed/accuracy specs

Control

Input increment

Workpiece coordinates

Feed

Spindle control

Tool compensation

Display

Program capacity

Programming

operations

Machine

operations

Basic specs

Programming

Operations

Communications / Networking

High speed/accuracy specs

Control

Position feedback

Coordinate functions

Min/max inputs

Feed

Spindle control

Tool compensation

Display

Self-diagnostics

Program capacity

Program operations

Easy Operation

Machine operations

MacMan

■Standard Specifications

ItemsKit specs 3D AOT AOT

ItemsKit specsNML

Interactive capacities

Programming

E D E D E D DGauging

3D

E D E D E

NML

Program memory capacity 512 KB (1,280 m)No. of tool compensations: 99 setsHelical interpolationSimultaneous editing of multiple programs (background)Custom macrosOperating time/part No. displayTool life managementRigid tappingJapanese language display

99 sets200 sets400 sets499 sets999 sets

C

Power ONSpindle run-timeNC ON timeMachining

X-Y-Z axisMILLAC 468V Ⅱ, MILLAC 561V Ⅱ

MILLAC 468V Ⅱ, MILLAC 561V Ⅱ

OperationsProgram restartFast skipManual handle interruptTool compensations

MonitoringPower shutoffHour meters

High-speed / High accuracyScale feedbackSpindle Thermal GrowthCompensationConstruction Thermal GrowthCompensationOtherLamp in control boxCircuit breakerProgram protection key switchJapanese language display

Tool maximum rotational speed settingTool offsetTool compensation memoryCF card adaptorWarming up function

Soft-K kitAI contour control ⅡData server (1 GB)Nano smoothingSoft-K kit (see table at left)

AI Contouring Control kit

■Optional Specifications

128 KB (320 m)256 KB (640 m)512 KB (1,280 m)1 MB (2,560 m)2 MB (5,120 m)4 MB (10,240 m)8 MB (20,480 m)125 (64 KB)250 (128 KB)500 (256 KB)1,000(512 KB, 1 MB, 2 MB, 4 MB, 8MB)2,000 (1 MB)4,000 (2 MB, 4 MB, 8 MB)

Total 600

AI contour control Ⅱ kit1 GB4 GB

48 sets300 sets

Programming

Program memory capacities

Registered programs

Helical interpolationSimultaneous editing of multiple programs (background)Custom macrosCustom macros (additional common variables)Display of machine utilization time / No. of partsTool life managementRigid tappingNo. of read-ahead blocks extension 600 1000Data server capacity

External M codeF1-digit feed (9 digits)Arbitrary angle chamfering corner RProgrammable mirror imageWorkpiece coordinate system setsAutomatic corner overrideScalingFS15 tape formatNanosmoothingCylindrical interpolationPolar coordinate interpolation

■Standard Specifications

■Optional Specifications

X, Y, Z simultaneous 3-axis, spindle control (1 axis)

OSP full range absolute position feedback (zero point return not required)

Machine coordinate system (1 set), work coordinate system (20 sets)

Decimal 8 digits,±99999.999mm to 0.001mm (±3937.0078 to 0.0001 in), 0.001°

Decimals as: 1 µm, 10 µm, 1 mm (0.0001, 1in) (1°, 0.01°, 0.001°) can be set

Override 0 to 200%, rapid traverse override 0 to 100%

Direct spindle speed command (S5), override 30 to 300%, multi-point indexing

No. of registered tools: Max 999 sets, tool length/radius compensation: 3 sets per tool

15-inch color LCD + touch panel operations

Automatic diagnostics and display of program, operation, machine, and NC system faults

Program storage capacity: 4 GB; operation backup capacity: 2 MB

Program management, editing, multitasking, scheduled program, fixed cycle, G-/M-code macros, arithmetic, logic statements,

math functions, variables, branch commands, coordinate calculate, area calculate, coordinate convert, programming help

“Single-mode operation” to complete a series of operations

Comprehensive management of tool shape and tool compensation information for each tool number

Tool data shared between machining, Advanced One-Touch IGF (optional), and Collision Avoidance System (optional)

Advanced operation panel/graphics facilitate smooth machine control

MDI, manual (rapid traverse, manual cutting feed, pulse handle), load meter, operation help, alarm help, sequence return, manual

interrupt/auto return, pulse handle overlap, parameter I/O, PLC monitor

Machining management: machining results, machine utilization, fault data compile & report, external output

USB (2 ports), Ethernet, RS-232-C interface (1 channel)

Hi-cut Pro, pitch error compensaion

TAS-S (Thermo Active Stabilizer––Spindle): MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V ⅡTAS-C (Thermo Active Stabilizer––Construction): MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V Ⅱ

Advanced One-Touch IGF-M (Real 3-D simulation included)Interactive MAP ( −MAP) −MAP−B −MAP−C

Auto gauging

Tool breakagedetectionGauging data printoutManual gauging (w/o sensor)Interactive gauging (Touch sensor, touch probe required)

External I/O, communicationsAdditional RS-232-C channels (1 channel is standard spec)DNC-B (RS-232-C to Ethernet (OSP) converter)DNC-DTAdditional USB (additional 2 ports; standard 2 ports)

Automation, Untended operationsAuto power shut-off

Warm-up (calendar timer) External programselectionCycle time reduction (Reduced cycle time)

MonitoringReal 3-D simulationSimple load monitorNC operation monitorHour meters

Work counterMOP-TOOL Tool life management

Auto scheduled program updateCommon variables(Std: 200)Program branch; 2 setsProgram notes (MSG)Coordinate systemselection (Std: 20)

Helical cutting (within 360 degrees)3-D circular interpolationSynchronized TappingⅡArbitrary angle chamferingCylindrical side facingSlope machiningTool maximum rotational speed settingF1-digit feed Programmable travel limits (G22, G23)Skip (G31)G/M code macro additional3-D tool compensationTool wear compensationDrawing conversion

User Task 2Fixture offsetInverse time feed

1,000 sets2,000 sets

Programmable mirror image (G62)Drawing enlarge / reduce (G50, G51)16 input/output variables

Spindle overload monitorHour meter, work counterPower ON, Spindle run-time,NC ON time, MachiningWith M02 and M30Adaptive control, overload monitoringCutting time and number of tools

100 sets200 sets400 sets

4 sets, 8 sets, parameter

By touch probe (w/G31)Including auto gauging

With M02 and END alarmsWorkpiece preps done OFF

X-, Y-, Z-axis

Sequence stopMid-block return

4, 8 signals

A, B, C axes [preps/install specs]

MILLAC 468V Ⅱ, MILLAC 561V ⅡMILLAC 468V Ⅱ, MILLAC 561V Ⅱ

High-speed, High-precisionAbsoScale detectionSuper-NURBSTAS-S (spindle)TAS-C (construction)

OtherControl cabinet lamp (inside) Circuit breakerSequence operationUpgraded sequencerestartAdditional pulse handleManual angle/arcJog feedExternal M signalsCollision Avoidance SystemMachining Navi M-g, M-i (cutting condition search) *1

One-Touch SpreadsheetBlock skip; 3 setsAdditional axesOSP-VPS (Virus protection system)

Push button, rotary switchBCD (2-digit, 4-digit)

File output

By touch sensor (w/G31)With tool compensation

Note: NML: normal 3D: 3D simulation E: Economy D: DeluxeAOT: Advanced One-Touch IGF-M*1. Machining Navi M-i is available with integral motor/spindles

Simultaneous X, Y, Z control, positioning, linear/circular interpolation

±999999.999 mm to 0.001 mm (±3937.0078 to 0.0001 in.), 0.001°

G54 to G59 6 sets

Direct F4 digit command, feed rate override 0 to 254%

Direct S5 command, spindle override 50 to 150%

T8 digit command, tool compensation: 64 sets

10.4-inch LCD, English language display, graphic display

Program capacity 64 KB (160 m)

63 registered programs, programmable data input

Fixed cycle, tool length measurement

Extended program editing, coordinate rotation, manual interaction

Optional block skip (1)

Pulse handle, input/output interface

Self-diagnostics, alarm buzzer

Tool compensation memory A

AI contour control I, bell-shaped acceleration/deceleration

Spindle Thermal Growth Compensation: MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V ⅡConstruction Thermal Growth Compensation: MILLAC 611V Ⅱ, MILLAC 761V Ⅱ, MILLAC 852V Ⅱ, MILLAC 1052V Ⅱ

Vertical Machining C

entersW

hen using Okum

a prod

ucts, always read

the safety precautions

mentioned

in the instruction manual and

attached to the p

roduct.

� The sp

eci�cations, illustrations, and d

escriptions in this b

rochure vary in different m

arkets and

are subject to change w

ithout notice.P

ub.N

o.MILLA

C V

series-E-(2a)-500 (M

ay 2014)

This product is subject to the Japanese government Foreign Exchange and Foreign Trade Control Act with regard to security controlled items; whereby Okuma Corporation should be noti�ed prior to its shipment to another country.

, OGUCHI-CHO, NIWA-GUN, AICHI 480-0193, JAPAN • TEL (0587) 95-7825 • FAX (0587) 95-6074

To protect your factory and equipment from �re and assure continued safe operation, observe the following �re safety precautions whenever you operate machinery. Whenever possible, avoid the use of oil-based coolants for cutting operations. Sparks caused by hot chips, tool friction, and grinding can cause �res. Always observe the following safety measures to ensure safe operation when machining �ammable materials or when performing dry machining.

Before machining any material designated by law as a �ammable substance, e.g., plastic, rubber, wood, acquaint yourself with the special characteristics of the material in terms of �re prevention, and observe the precautions given in (2) above to ensure safe operation. Example: When machining magnesium, there is a danger that magnesium chips and water-soluble coolants will react to produce hydrogen gas, resulting in an explosive �re if any chip should ignite.

Dry machining is a �re hazard because workpieces, tools, and chips are not cooled. To ensure safe operation, do not place any �ammable objects near the machine and do not allow chips to over accumulate. In addition, be sure to check cutting tools to make sure of their service life and the condition of the tool edge, and observe the precautions regarding oil-based coolants given in (2) above.

(1) Use non�ammable cutting �uid coolant. (2) When the use of an oil-based coolant is unavoidable:

Before you begin machining, check cutting tools to make sure of their service life and the condition of the tool edge, and choose cutting conditions that will not cause a �re. Periodically clean the coolant �lter to maintain suf�cient coolant discharge, and frequently verify that coolant is discharging normally. Take measures to control the outbreak of �re: Place a �re extinguisher near the machine, have an operator constantly monitor operation, and install an automatic �re extinguishing system. Do not place �ammable materials near the machine.Do not allow chips to over accumulate. Periodically clean the inside of the machine and the area surrounding it.Check that the machine is operating normally. Never run the machine unattended. Since an automatic �re extinguishing system and other peripherals are needed for grinding operations, please let us know as soon as possible if you plan to perform such operations.

Fire Safety Precautions

1. Oil-based coolant

2. Precautions regarding machining of potentially �ammable materials

3. Dry machining

•

•

•

•

•

•

•

•

•

Documents

Vertical Machining Centers - Bulmakmetal Ltdbulmakmetal.com/wp-content/uploads/2016/10/MILLAC_VII_series-E-2a...OSP-P300 The innovation that ... Okuma Control OSP-P300M Interactive