Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 2/15
Date:22-Nov-11
www.doppler.gr
Contents
3D LAYOUT ................................................................................................................................... 3
TECHNICAL SPECIFICATIONS 375KG (ECO2I) ............................................................................ 4
TECHNICAL SPECIFICATIONS 375KG (ECO2IS) .......................................................................... 5
TECHNICAL SPECIFICATIONS 450KG (ECO2I) ............................................................................ 6
TECHNICAL SPECIFICATIONS 450KG (ECO2IS) .......................................................................... 7
TECHNICAL SPECIFICATIONS 630KG (ECO2I) ............................................................................ 8
TECHNICAL SPECIFICATIONS 630KG (ECO2IS) .......................................................................... 9
TECHNICAL SPECIFICATIONS 1000KG (ECO2I) ........................................................................ 10
TECHNICAL SPECIFICATIONS 1000KG (ECO2IS) ...................................................................... 11
TECHNICAL SPECIFICATIONS 1200KG (ECO2I) ........................................................................ 12
TECHNICAL SPECIFICATIONS 1600KG (ECO2I) ........................................................................ 13
ARRANGEMENT ........................................................................................................................... 14
SINGLE ENTRANCE / DOUBLE ENTRANCE .............................................................................................. 14
CERTIFICATION .......................................................................................................................... 15
MANUFACTURER 'S DECLARATION ........................................................................................................... 15
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 3/15
Date:22-Nov-11
www.doppler.gr
3D Layout
1. SHAFT WALL
2. LANDING DOOR
3. BED PLATE
4. MOTOR
5 WIRE ROPE
6. COUNTERWEIGHT SLING
7. CAR SLING
8. GUIDE RAIL BRACKET
9. GUIDE RAIL
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 4/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 375kg (ECO2i)
EN81‐1 out of EN81‐1* EN81‐1 out of EN81‐1*
3350mm 2900mm 3400mm 2900mm
1060mm 800mm 1060mm 800mm
30000 mm 1030mm**
1250 Kg 800mm**
T70x65x9 TFS 302 H
T50x50x5 Steel
Minimum pit depth:
Maximum travel:
TRACTION MRL LIFT ECO2i (Roping 2:1)
Distance between CW guide rails:
Car sling:
Counterweight type:
Car guide rails:
Counterweight guide rails:
Distance between car guide rails:
Maximum suspended load (P + Q):
Rated load: 375 Kg (4 persons)
Travelling speed: 1 m/s 1,6 m/s
Shaft requirements:
Minimum headroom:
Traction sheave: Ø240‐Ø6,5mm
Car sling pulleys: Ø240‐6‐Ø6,5mm
CW pulley: Ø240‐6‐Ø6,5mm
5xØ6,5 mm
Drako 250T
Pulleys / Ropes
Ropes:
Motor 1 m/s*** 1,6 m/s***
G300‐Τ0 G300‐Τ0
3,0kW 4,5kWAlberto Sassi
DYNATECH PR2500UD
DOPPLER 1250‐9
MacPuarsa ATI/LD‐VA/M150
Safety gear
1 m/s 1,6 m/s
ACLA 165x80 ACLA 180x332Buffer
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 5/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 375kg (ECO2is)
30000 mm 1030mm**
1250 Kg 800mm**
T70x65x9 TFS 342 H
T50x50x5 Steel
Travelling speed:
Shaft requirements:
Distance between CW guide rails:
TRACTION MRL LIFT ECO2is (Roping 2:1)Rated load: 375 Kg (4 persons)
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
1 m/s
Low pit
3050mm
250mm
Minimum headroom:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q):
Traction sheave: Ø240‐Ø6,5mm
Car sling pulleys: Ø240‐6‐Ø6,5mm
CW pulley: Ø240‐6‐Ø6,5mm
5xØ6,5 mm
Drako 250T
Pulleys / Ropes
Ropes:
Motor 1 m/s***
G300‐Τ0
3,0kWAlberto Sassi
Safety gear DYNATECH PR2500UD
1 m/s
ACLA 165x80Buffer
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 6/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 450kg (ECO2i)
EN81‐1 out of EN81‐1* EN81‐1 out of EN81‐1*
3350mm 2900mm 3400mm 2900mm
1060mm 800mm 1060mm 800mm
30000 mm 1130mm**
1250 Kg 800mm**
T70x65x9 TFS 302 H
T50x50x5 Steel
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum headroom:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q): Distance between CW guide rails:
TRACTION MRL LIFT ECO2i (Roping 2:1)Rated load: 450 Kg (5 persons)
Travelling speed: 1 m/s 1,6 m/s
Shaft requirements:
Traction sheave: Ø240‐Ø6,5mm
Car sling pulleys: Ø240‐6‐Ø6,5mm
CW pulley: Ø240‐6‐Ø6,5mm
5xØ6,5 mm
Drako 250T
Pulleys / Ropes
Ropes:
Motor 1 m/s*** 1,6 m/s***
G300‐Τ0 G300‐Τ0
3,5kW 4,5kW
GETM1,9D‐100 GETM1,9D‐160
3kW 4,8kW
Alberto Sassi
Doppler
DYNATECH PR2500UD
DOPPLER 1250‐9
MacPuarsa ATI/LD‐VA/M150
1 m/s 1,6 m/s
ACLA 165x80 ACLA 180x332Buffer
Safety gear
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 7/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 450kg (ECO2is)
30000 mm 1130mm**
1250 Kg 800mm**
T70x65x9 TFS 342 H
T50x50x5 Steel
Maximum suspended load (P + Q): Distance between CW guide rails:
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
1 m/s
Low pit
3050mm
250mm
TRACTION MRL LIFT ECO2is (Roping 2:1)Rated load: 450 Kg (5 persons)
Travelling speed:
Shaft requirements:
Minimum headroom:
Pulleys / Ropes
Traction sheave: Ø240‐Ø6,5mm
Car sling pulleys: Ø240‐6‐Ø6,5mm
CW pulley: Ø240‐6‐Ø6,5mm
Ropes: 5xØ6,5 mm
Drako 250T
Motor 1 m/s***
Alberto Sassi G300‐Τ0
3,5kW
Doppler GETM1,9D‐100
3kW
Safety gear DYNATECH PR2500UD
Buffer 1 m/s
ACLA 165x80
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 8/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 630kg (ECO2i)
EN81‐1 out of EN81‐1* EN81‐1 out of EN81‐1*
3350mm 2900mm 3400mm 2900mm
1060mm 800mm 1060mm 800mm
30000 mm 1180mm**
1420 Kg 1200mm**
T70x65x9 TFS 302 H
T50x50x5 Steel / Concrete
Minimum headroom:
Minimum pit depth:
TRACTION MRL LIFT ECO2i (Roping 2:1)Rated load: 630 Kg (8 persons)
Travelling speed:
Shaft requirements:
1 m/s 1,6 m/s
Counterweight guide rails: Counterweight type:
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q): Distance between CW guide rails:
Car guide rails: Car sling:
Pulleys / Ropes
Traction sheave: Ø240‐Ø6,5mm
Car sling pulleys: Ø240‐6‐Ø6,5mm
CW pulley: Ø240‐6‐Ø6,5mm
Ropes: 6xØ6,5 mm
Drako 250T
Motor 1 m/s*** 1,6 m/s***
G300‐Τ0 G300‐Τ0
4,0kW 4,5kW
GETM1,9D‐100 GETM1,9D‐160
4,1kW 6,6kWDoppler
Alberto Sassi
DYNATECH PR2500UD
DOPPLER 1430‐9
MacPuarsa ATI/LD‐VA/M150
1 m/s 1,6 m/s
ACLA 165x80 ACLA 180x332Buffer
Safety gear
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 9/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 630kg (ECO2is)
30000 mm 1180mm**
1420 Kg 1200mm**
T70x65x9 TFS 342 H
T50x50x5 Steel / Concrete
Maximum suspended load (P + Q): Distance between CW guide rails:
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
1 m/s
Low pit
3050mm
250mm
TRACTION MRL LIFT ECO2is (Roping 2:1)Rated load: 630 Kg (8 persons)
Travelling speed:
Shaft requirements:
Minimum headroom:
Traction sheave: Ø240‐Ø6,5mm
Car sling pulleys: Ø240‐6‐Ø6,5mm
CW pulley: Ø240‐6‐Ø6,5mm
6xØ6,5 mm
Drako 250T
Pulleys / Ropes
Ropes:
Motor 1 m/s***
G300‐Τ0
4,0kW
GETM1,9D‐100
4,1kW
Alberto Sassi
Doppler
Safety gear DYNATECH PR2500UD
Buffer1 m/s
ACLA 165x80 * Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 10/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 1000kg (ECO2i)
EN81‐1 out of EN81‐1* EN81‐1 out of EN81‐1*
3450mm 3100mm 3650mm 3300mm
1140mm 800mm 1340mm 1000mm
30000 mm 1180‐1480mm**
2200 Kg 1400‐1200mm**
T89x62x16 TFS 402 H
T70x65x9 Steel / Concrete
TRACTION MRL LIFT ECO2i (Roping 2:1)Rated load: 1000 Kg (13 persons)
Travelling speed: 1 m/s 1,6 m/s
Shaft requirements:
Minimum headroom:
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q): Distance between CW guide rails:
Traction sheave: Ø320‐Ø8mm
Car sling pulleys: Ø320‐8‐Ø8mm
CW pulley: Ø320‐8‐Ø8mm
7xØ8 mm
Drako 8x19 S‐FC
Pulleys / Ropes
Ropes:
Motor 1 m/s*** 1,6 m/s***
G400‐L1 G400‐L2
7,7kW 13,4kW
WR 1000‐100 WR 1000‐160
6,9 Kw 11,1kW
Alberto Sassi
Doppler
Safety gear DYNATECH PR2500UD
1 m/s 1,6 m/s
ACLA 165x80 HAS HHT 2Buffer
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 11/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 1000kg (ECO2is)
30000 mm 1180‐1480mm**
2200 Kg 1400‐1200mm**
T89x62x16 TFS 442
T70x65x9 Steel
TRACTION MRL LIFT ECO2is (Roping 2:1)Rated load: 1000 Kg (13 persons)
Travelling speed: 1 m/s
Shaft requirements: Low pit
Minimum headroom: 3200mm
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum pit depth: 250mm
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q): Distance between CW guide rails:
Traction sheave: Ø320‐Ø8mm
Car sling pulleys: Ø320‐8‐Ø8mm
CW pulley: Ø320‐8‐Ø8mm
7xØ8 mm
Drako 8x19 S‐FC
Pulleys / Ropes
Ropes:
Motor 1 m/s***
G400‐L1
7,7kW
WR 1000‐100
6,9 Kw
Alberto Sassi
Doppler
Safety gear DYNATECH PR2500UD
Buffer1 m/s
ACLA 165x80 * Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 12/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 1200kg (ECO2i)
EN81‐1 out of EN81‐1* EN81‐1 out of EN81‐1*
3450mm 3100mm 3650mm 3300mm
1140mm 800mm 1340mm 1000mm
30000 mm 1180‐1480mm**
2550 Kg 1400‐1200mm**
T114x89x16 TFS 402 H
T70x65x9 Steel
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q): Distance between CW guide rails:
TRACTION MRL LIFT ECO2i (Roping 2:1)Rated load: 1200 Kg (16 persons)
Travelling speed: 1 m/s 1,6 m/s
Shaft requirements:
Minimum headroom:
Traction sheave: Ø320‐Ø8mm
Car sling pulleys: Ø320‐8‐Ø8mm
CW pulley: Ø320‐8‐Ø8mm
8xØ8 mm
Drako 8x19 S‐FC
Pulleys / Ropes
Ropes:
Motor 1 m/s*** 1,6 m/s***
G400‐L2 G400‐L2
8,4kW 13,4kW
WR 1250‐100 WR 1250‐160
8,6kW 13,8kW
Alberto Sassi
Doppler
Safety gear DYNATECH PR4000UD
1 m/s 1,6 m/s
ACLA 165x80 HAS HHT 3Buffer
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 13/15
Date:22-Nov-11
www.doppler.gr
Technical Specifications 1600kg (ECO2i)
EN81‐1 out of EN81‐1* EN81‐1 out of EN81‐1*
3450mm 3100mm 3650mm 3300mm
1200mm 800mm 1400mm 1000mm
30000 mm 1480‐1700mm**
3100 Kg 1400mm**
T114x89x16 TFS 502 H
T70x65x9 Steel
Car guide rails: Car sling:
Counterweight guide rails: Counterweight type:
Minimum pit depth:
Maximum travel: Distance between car guide rails:
Maximum suspended load (P + Q): Distance between CW guide rails:
TRACTION MRL LIFT ECO2i (Roping 2:1)Rated load: 1600 Kg (21 persons)
Travelling speed: 1 m/s 1,6 m/s
Shaft requirements:
Minimum headroom:
Traction sheave: Ø360‐Ø9mm
Car sling pulleys: Ø360‐8‐Ø9mm
CW pulley: Ø360‐8‐Ø9mm
8xØ9 mm
Drako 8x19 S‐FC
Pulleys / Ropes
Ropes:
Motor 1 m/s*** 1,6 m/s***
G400‐L2 G400‐L2
9,3kW 20,3kW
WR 1600‐100 WR 1600‐160
11,1kW 17,7kW
Alberto Sassi
Doppler
Safety gear DYNATECH PR4000UD
1 m/s 1,6 m/s
ACLA 165x80 HAS HHT 3Buffer
* Minimum shaft requirements using risk analysis. ** Typical distances between guide rails for car and CW. ** * Typical machine calculation with inox cabin, 15m travel and 180 starts/hour.
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 14/15
Date:22-Nov-11
www.doppler.gr
Arrangement Single entrance / Double entrance
Persons Load Shaft Cabin Door Type
Nr. (kg) WxD (mm) WxD (mm) WxH (mm) ECO
5 375 1500x1450 950x1050 2PT 800x2000 i
5 375 1450x1450 950x1050 2PT 800x2000 is
6 450 1600x1550 1050x1150 2PT 800x2000 i
6 450 1550x1550 1050x1150 2PT 800x2000 is
8 630 1650x1800 1100x1400 2PT 800x2000 i
8 630 1600x1800 1100x1400 2PT 800x2000 is
13 1000 1850x2500/2050x2000 1100x2100/1400x1600 2PT 1000x2000 i
13 1000 1720x2500/2020x2000 1100x2100/1400x1600 2PT 1000x2000 is
16 1200 2230x2400 1400x2000 2PT 1000x2000 i
21 1600 2280x2800 1450x2400 2PT 1000x2000 i
Persons Load Shaft Cabin Door Type
Nr. (kg) WxD (mm) WxD (mm) WxH (mm) ECO
5 375 1500x1600 950x1050 2PT 800x2000 i
5 375 1450x1600 950x1050 2PT 800x2000 is
6 450 1600x1700 1050x1150 2PT 800x2000 i
6 450 1550x1700 1050x1150 2PT 800x2000 is
8 630 1650x1950 1100x1400 2PT 800x2000 i
8 630 1600x1950 1100x1400 2PT 800x2000 is
13 1000 1850x2650/2050x2150 1100x2100/1400x1600 2PT 1000x2000 i
13 1000 1720x2650/2020x2150 1100x2100/1400x1600 2PT 1000x2000 is
16 1200 2230x2550 1400x2000 2PT 1000x2000 i
21 1600 2280x2950 1450x2400 2PT 1000x2000 i
Single entrance
Double entrance
TRACTION MRL LIFTS TYPE: ECO 2i & ECO2is
Version: 1.3
Page: 15/15
Date:22-Nov-11
www.doppler.gr
Certification
ΔΗΛΩΣΗ ΚΑΤΑΣΚΕΥΑΣΤΗ MANUFACTURER’S DECLARATION
Με το παρόν δηλώνεται ότι η εταιρεία:
This is to declare that the company:
DOPPLER S.A. ΒΙO.ΠΕ. Πολυκάστρου Πολύκαστρο, 61200
DOPPLER S.A. Industrial Park of Polikastro GR 61200, Polikastro Greece
έχει εγκαταστήσει και εφαρμόζει ένα πλήρες Σύστημα Διασφάλισης Ποιότητας σύμφωνα με την
οδηγία για τους ανελκυστήρες (95/16/ΕΚ, Παράρτημα ΧΙΙΙ, Ενότητα Η) και το πρότυπο ΕΝ ISO 9001:2000, για τo
has established and operates a Quality Assurance System pursuant to the Lift Directive (95/16/EC, Annex XIII, Module H)
and the EN ISO 9001:2000, for the
Σχεδιασμό, Κατασκευή, Συναρμολόγηση, Μελέτες εγκατάστασης, Μέθοδοι για τον Τελικό Έλεγχο των Ανελκυστήρων
Design, Manufacture, Assembly, Studies of Installation, Methods of final inspection and Testing of lifts.
Το σύστημα αυτό εξασφαλίζει ότι ο ανελκυστήρας, Νο ___________ σχεδιάστηκε σύμφωνα με ένα ανελκυστήρα που ικανοποιεί όλες τις απαιτήσεις της οδηγίας των ανελκυστήρων και ο
εγκαταστάτης μπορεί να τοποθετήσει τη σήμανση CE στον ανελκυστήρα ακολουθώντας μία από τις διαδικασίες που αναφέρονται στο άρθρο 8.2iii της οδηγίας.
This system ensures that the lift, Nr ___________ was designed in accordance with a lift that satisfies all the requirements of the Lift Directive, and the installer may affix a CE marking on the Lift following the procedure drawn up to article 8.2.iii of the Directive.
DOPPLER S.A. Βιομηχανία Ανελκυστήρων
DOPPLER S.A. Lift Manufacturers
Σταύρος Σταυρόπουλος
Πρόεδρος & Διευθύνων Σύμβουλος Stavros Stavropoulos
President & Managing Director