128

Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Embed Size (px)

Citation preview

Page 1: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting
Page 2: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 2Versa Fittings

TERMS AND CONDITIONS OF SALE

Warranty and Limitation of Liability:

1. All Versa products are guaranteed against defects resulting from faulty workmanship or materials, for product returned within 60 days of purchase, subject to the limitations, exceptions, disclaimers and conditions stipulated hereunder or specifi ed with respect to particular products and posted, updated or amended on the Versa website or stipulated in Versa Media.

2. Versa will replace, free of charge, any products which are found to be defective in workmanship or material, provided that the following conditions are met:

Versa is promptly notifi ed in writing of such defect immediately upon discovery of same and the defective product is promptly returned to Versa. Claimant must provide documentary evidence of failure, as well as the failed components or representative samples of product(s) that are alleged to have failed and agree to inspection by Versa of the system in which the alleged defective product(s) was/(were) installed.

the products have not been altered or modifi ed after leaving Versa’s premises, have not been used in more than one installation, show no evidence of disassembly or tampering, are not and have not been subjected to abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair and the defect is not due, without limitation, to faulty installation, misalignment of products, vibration, ordinary wear and tear, corrosion, erosion, U.V. degradation, incompatible lubricants, pastes and thread sealants, unusual pressure surges or pulsation, water hammer, temperature shocking or fouling, acts of nature such as earthquakes, fi re, fl ood or lightning or any other event of force majeure.

if the product is perishable, the product has been used or installed prior to the expiry date printed on the product.

the products have been used in applications or under conditions that are in accordance with the technical information or Media available from Versa.

3. With respect to the goods not of Versa’s own manufacture, this warranty shall apply only to the extent that Versa is able to enforce a claim for liability against the manufacturer thereof.

4. Versa is not responsible for any damage to any products while being crated or transported by a third party provider or to damage caused by the installation other than by a qualifi ed technician.

Versa disclaims any liability or responsibility:

for labour, materials and/or other expenses required to replace the defective product or to repair any damage resulting from the use thereof

for the purchaser’s calculations, product drawings or engineering design specifi cations

regarding the accuracy of any plans, drawings or specifi cations furnished to the purchaser as part of the sale of any of its products

for loss or damage resulting from failure to abide by Versa’s warnings, safety instructions or other precautionary guidelines.

Any claim of liability asserted against Versa whether in contract or in tort (including negligence) or otherwise with respect to or arising out of the sale, delivery, installation, repair or use of any products sold to purchaser shall not exceed the purchase price of the products determined to be defective. It is the responsibility of the purchaser to obtain and pay for emergency repairs.

Versa’s liability in respect to the sale is strictly limited to the replacement of products and Versa shall not, in any event be liable for any damages whether for the loss of use or business interruption or any other claim for incidental, consequential, special or punitive damages. There is no warranty, condition or representation of any nature whatsoever, expressed or implied, by statute or otherwise, except as herein contained. Versa disclaims any implied warranties of merchantability and/or fi tness of its products for a special purpose or other warranty of quality.

Order Acceptance: All orders given to, or accepted by our representatives are subject to credit approval and acceptance by Versa. Fulfi llment of orders and agreements made by us are contingent upon strikes, fi res, accidents, and other causes beyond our control. Minimum net invoice value is $50.00 CDN.

Pricing / FOB: Pricing is subject to change without notice. Versa reserves the right to ship all orders on the basis of the price in effect at the time of shipment. Freight is FOB our warehouse.

Special Order Items: Orders for special parts are nonreturnable. Cancellation of an order may result in charges for tooling, engineering, materials and labour already performed. We reserve the right to ship 10% over or under the order quantity.

Returns/Shortages: A return authorization number must be issued by us before any returns will be accepted. Please contact our order desk for assistance in this regard. Claims for shortages will not be allowed unless made within 10 days of receipt of the merchandise.

IMPORTANT NOTICE

All line drawings and photos, in all Versa Media, are displayed solely to assist in product identifi cation. If a specifi c pattern or dimension is required, a Versa offi ce should be contacted for verifi cation before ordering the product. The products described herein, including without limitation, product features, specifi cations, designs, appearance, availability and pricing, are subject to change by Versa at any time without notice.

AGGRESSIVE WATER WARNING!

Water quality can signifi cantly infl uence the life of certain products. Purchasers of these products must test for corrosive elements, acidity, alkalinity and other relevant contaminants, including chlorine, and treat or condition the water appropriately. Failure to do so will void warranty and may lead to premature failure of tubes, valves and fi ttings.

WARNING!FAILURE OR IMPROPER USE OR IMPROPER SELECTION OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE

Versa Fittings & Mfg. Inc. (Versa) catalogues, literature, web pages, electronic documents, quotations etc. (Media) provide product options for further investigation by purchasers having technical expertise. It is important that purchasers analyze all aspects of their applications and review the information concerning these products in Versa’s Media. Due to the wide variety of applications and operating conditions for these products, the purchaser, through his/her own analysis and testing, is solely responsible for making the fi nal selection of the product and assuring that all performance, safety and warning requirements of the application are met. If the purchaser is undecided about whether any product option meets with the purchaser’s requirements, Versa strongly recommends that the purchaser retain professional or technical advisors with the requisite expertise to assist the purchaser. The products as described herein, including without limitation, product characteristics, specifi cations and availability, are subject to change by Versa at any time without notice.

Page 3: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 3

Please Note: Pictures are for identifi cation purposes only and may not refl ect actual fi tting pattern. Please confi rm specifi c patterns with our customer service before ordering.

INDEXAir Conditioning Mounting Brackets Page 65Air Hose Assemblies Page 49Air shift Transmission Fittings Page 50Ball Valves - Full Port Page 19Ball Valves - Gas - CSA Approved Page 20Ball Valves - Stainless Steel Page 19Black Malleable Pipe Fittings - Sch. 40 Pages 71 - 75Black Malleable Pipe Fittings Repair Kit Page 84Black Steel Pipe Nipples - Sch. 40 Pages 75 - 77Brass Bar Stock Fittings Pages 33 & 34Brass Closet Bolt Page 33Brass Ferrules Page 42Brass Hydraulic Brake Fittings Pages 55 & 56Bulkhead Adapters (Terminal Bolts) Page 54Clamps - Constant Tension Page 37Clamps - SmartSeal™ Constant Tension Page 37Clamps - Gear Pages 38 & 39Clamps - Lined Gear Clamps Page 41Clamps - “O” Pages 37 & 38Clamps - Snaplock® Quick Release Page 41Clamps - T-Bolt Page 41Clamps - Wrap Around Page 41Clear PVC Tube Page 48Clips Page 44Compression Fittings - Miscellaneous Page 32Contractor’s Water Hose Assemblies Page 49Copper Pipe Page 61Copper Tube Page 61Corrugated Stainless Steel Gas Pipe / Fittings Page 85Corrugated Stainless Steel Gas Pipe Access. / Kit Pages 86 & 87D.O.T. Air Brake Fittings For Copper Tube Pages 50 & 51D.O.T. Air Brake Fittings For Nylon Tube Pages 51 & 52D.O.T. Air Brake Fittings Repair Kit Page 60D.O.T. Bulk Rubber Air Brake Hose Page 56D.O.T. Nylon Air Brake Tubing Page 56D.O.T. Push To Connect Fittings Pages 54 & 55D.O.T. Reusable Air Brake Hose Fittings Pages 53 & 54D.O.T. Rubber Air Brake Hose Assemblies Pages 56 - 59Drop Ear Fittings Page 31Drum Faucet Page 18Faucet Accessories Page 33Fittings - Compression Pages 6 & 7Fittings - Flare Pages 4 & 5Fittings - Garden Hose Pages 11 & 12Fittings - Pipe Pages 7 - 9Fittings - Poly-Barb Page 14Fittings - Push To Connect Pages 15 & 16Fittings - Versa-Flo Pages 13 & 14Galvanized Pipe Fittings - Sch. 40 Pages 78 - 82Galvanized Steel Pipe Nipples - Sch. 40 Pages 82 - 84Gladhand Couplings Page 60Grease Whip Assemblies Page 60Hangers and Accessories Page 42Hose - Miscellaneous Page 60Hose Barbs - Lok-On Pages 12 & 13Hose Barbs - Standard Pages 10 & 11Humidifier Accessories Page 33John Guest Push To Connect Page 36Kynar Check Valve Page 29

Kynar Higher Pressure Compression Fittings Pages 27 - 29Kynar Standard Compression Fittings Pages 25 - 27Lead Free Cast Brass Fittings Pages 121 - 124Lead Free Red Brass Pipe Nipples Pages 124 & 125Manufacturing Capabilities Page 99Merchant Steel Couplings Pages 126 & 127Natural Gas & Propane Outlet Box/Kit Page 87Nickel Plated Brass Compression Fittings Page 32Nipple Trays Page 84Nylon Garden Hose Fittings Page 31Nylon Higher Pressure Compression Fittings Pages 24 & 25Nylon Hose Barb Fittings Pages 30 & 31Nylon Pipe Fittings Pages 29 & 30Nylon Standard Compression Fittings Pages 22 & 23Nylon Tube Page 47Perforated Suspension Straps Page 43PEX FIttings & Accessories Pages 34 & 35PEX Pipe Page 34Pipe Hooks Page 43Pipe Stays and Accessories Page 43Polyethylene Tube Page 47Polyurethane Tube Page 48Quick Disconnects - Aeroquip 5100 Interchange Page 21Quick Disconnects - ARO 210 Interchange Pages 20 & 21Quick Disconnects - Industrial Interchange Page 21Quick Disconnects - Snow Plow Set Page 21Rubber Hose Page 46Self-Storing Air Hose (Bulk) Page 48Self-Storing Air Hose Assemblies Page 48Silicone Tube Page 48Split Loom Page 60Stainless Steel Gas Dryer Connectors / Adaptors Pages 68 & 69Stainless Steel Gas Heater Connectors / Adaptors Pages 69 & 70Stainless Steel Gas Range Connectors / Adaptors Pages 66 & 67Steel J.I.C. 37° Flare Adaptors Pages 89 - 100Steel J.I.C. 37° Swivel Adaptors Pages 100 - 102Steel Pipe Page 71Steel Pipe Adaptors Pages 102 - 108Steel Hose Nipples Page 126Steel O-Ring Boss Adaptors Pages 112 - 119Steel O-Ring Boss Hose Adaptors Pages 120Steel Swivel NPSM Adaptors Pages 108 - 111Steel Beaded Hose Adaptors Pages 111 - 112Tapes & Fluids Page 65Teflon Tape Page 10Thermo-Plastic Hose Page 45Thread Sealants Pages 65 & 66Underground Piping Products Pages 87 & 88Valves - Boiler Drain Page 19Valves - Brass Vacuum Breaker Page 19Valves - Drain Cocks Page 17Valves - Gate Page 18Valves - Needle Page 18Valves - Spring Bottom Page 17Valves - Swing Check Page 19Valves - Tank Page 19Valves - Truck Page 20Valves - Water Stop Page 18Wrot Copper Fittings Pages 62 - 65

Page 4: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 4

Fittings - Flare Fittings - Flare

Forged Nut - ShortPart No.40-440-640-840-1040-6-440-8-6

Tube Size1/43/81/25/8

3/8 x 1/41/2 x 3/8

Extruded Nut - LongPart No.41-441-641-841-1041-12

Tube Size1/43/81/25/83/4

Extruded Nut - ShortPart No.41S-341S-441S-541S-641S-841S-10

Tube Size3/161/45/163/81/25/8

Union - Tube Both EndsPart No.42-342-442-542-642-842-1042-6-442-8-6

Tube Size3/161/45/163/81/25/8

3/8 x 1/41/2 x 3/8

Union Tee - Tube All EndsPart No.44-344-444-644-844-10

Tube Size3/161/43/81/25/8

Female ConnectorPart No.46-4A46-4B46-6B46-6C46-6D46-6E46-8C46-8D46-10D46-10E

Tube x FPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 3/81/2 x 1/25/8 x 1/25/8 x 3/4

Tube x MPT3/16 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x 3/85/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/4

Part No.48-3A48-4A48-4B48-4C48-5A48-6A48-6B48-6C48-6D48-6E48-8B48-8C48-8D48-8E48-10C48-10D48-10E48-12D48-12E

Male Connector

Page 5: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 5

Fittings - Flare

Male Elbow ( 90 Deg. )Part No.49-4A49-4B49-5A49-6A49-6B49-6C49-6D49-8C49-8D49-8E49-10D49-10E49-12D49-12E

Tube x MPT1/4 x 1/81/4 x 1/45/16 x 1/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/21/2 x 3/45/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/4

Female Elbow ( 90 Deg. )Part No.50-4A50-4B50-6B50-6C50-6D50-8D50-10D

Tube x FPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/25/8 x 1/2

Fittings - Flare

Union Elbow ( 90 Deg. ) - Tube Both EndsPart No.55-455-655-8

Tube Size1/43/81/2

Sealing CapPart No.56-456-656-8

Tube Size1/43/81/2

Sealing BonnetPart No.57-457-657-8

Tube Size1/43/81/2

Sealing PlugPart No.58-458-658-8

Tube Size1/43/81/2

Cross - Tube All EndsPart No.52-6

Tube Size3/8

Part No.54-4A54-4B54-6B54-6C54-8C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/8

Male Elbow ( 45 Deg. )

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 6: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 6

Fittings - Compression

Standard SleevePart No.60-260-360-460-560-660-860-10

Tube Size1/83/161/45/163/81/25/8

Standard NutPart No.61-261-361-461-561-661-861-10

Tube Size1/83/161/45/163/81/25/8

Union - Tube Both EndsPart No.62-362-462-562-662-862-1062-6-462-8-662-10-6

Tube Size3/161/45/163/81/25/8

3/8 x 1/41/2 x 3/85/8 x 3/8

Fittings - Compression

Union Tee - Tube All EndsPart No.64-264-364-464-564-664-864-10

Tube Size1/83/161/45/163/81/25/8

Union Elbow ( 90 Deg. ) - Tube Both EndsPart No.65-465-565-665-865-10

Tube Size1/45/163/81/25/8

Female ConnectorPart No.66-4A66-4B66-6B66-6C66-6D66-8C66-8D66-10D

Tube x FPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/25/8 x 1/2

Male ConnectorPart No.68-2A68-3A68-4A68-4B68-5A68-5B68-6A68-6B68-6C68-6D68-8C68-8D68-10C68-10D

Tube x MPT1/8 x 1/83/16 x 1/81/4 x 1/81/4 x 1/45/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/2

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 7: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 7

Part No.108-A108-B108-C108-D

FPT1/81/43/81/2

Cap

Male Elbow ( 90 Deg. )Part No.69-3A69-4A69-4B69-5A69-5B69-6A69-6B69-6C69-8C69-8D69-10C69-10D

Tube x MPT3/16 x 1/81/4 x 1/81/4 x 1/45/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/2

Fittings - Pipe

Elbow ( 90 Deg. ) - FPT Both EndsPart No.100-A100-B100-C100-D

FPT1/81/43/81/2

Fittings - Compression

Tee - FPT All EndsPart No.101-A101-B101-C101-D

FPT1/81/43/81/2

FPT1/81/43/81/2

Cross - FPT All EndsPart No.102-A102-B102-CC102-D

Coupling - FPT Both EndsFPT1/8 1/43/81/2

Part No.103-A103-B103-C103-D

Fittings - Pipe

Branch Tee - FPT x FPT x MPTPart No.106-A106-B106-C

Size1/81/43/8

FPT1/8 1/4

Part No.104-A104-B

Union (3 pc.) - FPT Both Ends

Elbow (45 Deg.) - FPT Both EndsFPT1/8 1/4

Part No.105-A105-B

Run Tee - FPT x MPT x FPTPart No.107-A107-B107-C107-D

Size1/81/43/81/2

Page 8: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 8

Square Head PlugPart No.109-A109-B109-C109-D

BushingMPT x FPT

1/4 x 1/83/8 x 1/83/8 x 1/41/2 x 1/81/2 x 1/41/2 x 3/83/4 x 3/83/4 x 1/2

Part No.110-BA110-CA110-CB110-DA110-DB110-DC110-EC110-ED

MPT1/81/43/81/2

Lock NutPart No.111-A111-B111-C111-D

FPT1/81/43/81/2

Close NipplePart No.112-A112-B112-C112-D112-E

MPT1/81/43/81/23/4

Long NipplePart No.113-A11/2113-A2113-A21/2113-A3113-A31/2113-A4

113-B11/2113-B2113-B21/2113-B3113-B31/2113-B4

113-C11/2113-C2113-C21/2113-C3113-C31/2113-C4

113-D11/2113-D2113-D21/2113-D3113-D31/2113-D4

MPT x Length1/8 x 1-1/2

1/8 x 21/8 x 2-1/2

1/8 x 31/8 x 3-1/2

1/8 x 4

1/4 x 1-1/21/4 x 2

1/4 x 2-1/21/4 x 3

1/4 x 3-1/21/4 x 4

3/8 x 1-1/23/8 x 2

3/8 x 2-1/23/8 x 3

3/8 x 3-1/23/8 x 4

1/2 x 1-1/21/2 x 2

1/2 x 2-1/21/2 x 3

1/2 x 3-1/21/2 x 4

Fittings - Pipe Fittings - Pipe

Page 9: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 9

Street Elbow ( 90 Deg. ) - ExtrudedPart No.115-A115-B115-C115-D

FPT x MPT1/8 x 1/81/4 x 1/43/8 x 3/81/2 x 1/2

Street Elbow ( 90 Deg. ) - ForgedPart No.116-A116-B116-C116-D

FPT x MPT1/8 x 1/81/4 x 1/43/8 x 3/81/2 x 1/2

Countersunk Hex PlugPart No.118-A118-B118-C118-D

MPT1/81/43/81/2

Reducing Coupling - FPT Both EndsPart No.119-BA119-CB119-DC

FPT x FPT1/4 x 1/83/8 x 1/41/2 x 3/8

Part No.120-AA120-BA120-BB120-CB120-CC120-DC120-DD

FPT x MPT1/8 x 1/81/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Pipe Adaptor

Fittings - Pipe

Please Note: Items prefi xed with “LF” are of lead free brass. Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Hex Nipple - MPT Both endsPart No.122-A122-B122-C122-D122-BA122-CB122-DC

MPT1/81/43/81/2

1/4 x 1/83/8 x 1/41/2 x 3/8

Street Elbow ( 45 Deg. ) - ExtrudedPart No.124-A124-B124-C124-D

FPT x MPT1/8 X 1/81/4 X 1/43/8 X 3/81/2 X 1/2

Fittings - Pipe

Hex Head PlugPart No.121-A121-B121-C121-D

MPT1/81/43/81/2

Page 10: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 10

Female Hose BarbPart No.126-4A126-4B126-5B126-6A126-6B126-6C126-6D126-8C126-8D

Female S.A.E. Swivel Hose BarbPart No.128-4X4128-4X6128-6X6128-8X8

Hose I.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Hose I.D. x FSAE1/4 x 1/41/4 x 3/83/8 x 3/81/2 x 1/2

Tefl on Tape

White Tefl on TapePart No.121-M8

Description1/2”x 480”

Hose Barbs - Standard

Male Hose BarbPart No.125-3A125-4A125-4B125-4C125-4D125-5A125-5B125-5C125-6A125-6B125-6C125-6D125-6E125-8B125-8C125-8D125-8E125-10C125-10D125-10E125-12D125-12E125-16E125-16F

Hose I.D. x MPT3/16 x 1/81/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/25/16 x 1/85/16 x 1/45/16 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 1/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x 3/85/8 x 1/25/8 x 3/43/4 x 1/23/4 x 3/41 x 3/41 x 1

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Hose Barb Splicer - Barb Both EndsPart No.129-3129-4129-5129-6129-8

Hose I.D.3/161/45/16 3/81/2

Female Swivel N.P.S.M. - Gasket SealPart No.130-4A130-4B130-6B130-6C130-8D

Hose I.D. x FNPSM1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 1/2

Hose Barbs - Standard

Page 11: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 11

Hose Barbs - Standard

Male Hose Barb Elbow ( 90 Deg. )Part No.139-4A139-4B139-6B139-6C139-8B139-8C139-10C139-10D

Hose I.D. x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/85/8 x 3/85/8 x 1/2

Male Hose Barb Elbow ( 45 Deg. )Part No.140-6A140-6B140-6C

Hose I.D. x MPT3/8 x 1/83/8 x 1/43/8 x 3/8

Fittings - Garden Hose

Female Swivel N.P.S.M. - 30 Deg. Ball SeatPart No.131-4B131-5B131-6B131-6C131-8D131-12E

Hose I.D. x FNPSM1/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 1/23/4 x3/4

Male Hose BarbHose I.D. x MGHT

3/8 x 3/41/2 x 3/45/8 x 3/43/4 x 3/4

1 x 1

Part No.193-6193-8193-10193-12193-16

Male Pipe Swivel AdaptorPart No.194-B194-C

MPT x FGHT1/4 x 3/43/8 x 3/4

Female Swivel Hose BarbPart No.195-6195-8195-10195-12195-16

Hose I.D. x FGHT3/8 x 3/41/2 x 3/45/8 x 3/43/4 x 3/4

1 x 1

Part No.196-C196-D196-E196-F196-16F

MPT x MGHT3/8 x 3/41/2 x 3/43/4 x 3/41 x 3/41 x 1

Male Adaptor

Page 12: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 12

Male Hose BarbPart No.725-4A725-4B725-6A725-6B725-6C725-6D725-8B725-8C725-8D725-10D725-12E

Hose I.D. x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/25/8 x 1/23/4 x 3/4

Hose Barbs - Lok-On

Fittings - Garden Hose

Male Coupling - Garden Hose Both EndsPart No.196-W

MGHT x MGHT3/4 x 3/4

Fittings - Garden Hose

Adaptor - Female Pipe x Male Garden HosePart No.197-D197-E

FPT x MGHT1/2 x 3/43/4 x 3/4

Adaptor - Male Pipe x Female Garden HosePart No.199-D199-E

MPT x FGHT1/2 x 3/43/4 x 3/4

Swivel Adaptor - Female Pipe x Female Garden HosePart No.199S-D199S-E

FPT x FGHT1/2 x 3/43/4 x 3/4

CapPart No.200-W

FGHT3/4

Standard Knurled NutPart No.201-W

FGHT3/4

Swivel UnionPart No.203-W

FGHT x FGHT3/4 x 3/4

Standard Garden Hose Washer - RubberPart No.GHW-12R

GH3/4

Adaptor - Female Pipe x Female Garden HosePart No.198-D198-E

FPT x FGHT1/2 x 3/43/4 x 3/4

Female Hose BarbPart No.726-4A726-4B726-6B726-6C726-8C726-8D

Hose I.D. x FPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Page 13: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 13

Hose Barbs - Lok-On

Female S.A.E. Swivel Hose BarbPart No.728-44728-66728-68728-88728-1010728-1212

Hose I.D. x FSAE1/4 x 1/43/8 x 3/83/8 x 1/21/2 x 1/25/8 x 5/83/4 x 3/4

Hose Barb Splicer - Barb Both EndsPart No.729-4729-6729-8729-10729-12

Hose I.D.1/43/81/25/83/4

Male Inverted Flare Swivel BarbPart No.735-44735-66

Hose I.D. x Tube1/4 x 1/43/8 x 3/8

Part No.738-44738-66738-88738-1010738-1212

Hose I.D. x FJIC1/4 x 1/43/8 x 3/81/2 x 1/25/8 x 5/83/4 x 3/4

Female J.I.C. Swivel Hose BarbMale S.A.E. Hose BarbPart No.727-44727-66727-88

Hose I.D. x MSAE1/4 x 1/43/8 x 3/81/2 x 1/2

Male J.I.C. Hose BarbPart No.737-44737-66737-88

Hose I.D. x MJIC1/4 x 1/43/8 x 3/81/2 x 1/2

Hose Barbs - Lok-On

Fittings - Versa-Flo

Plastic SleevePart No.260VF-4260VF-6

Tube Size1/43/8

Brass Nut & Plastic SleevePart No.261VF-4261VF-6

Tube Size1/43/8

Union - Tube Both EndsPart No.262VF-4262VF-6

Tube Size1/43/8

Part No.264VF-4264VF-6

Tube Size1/43/8

Union Tee - Tube All Ends

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 14: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 14

Fittings - Versa-Flo

Female ConnectorPart No.266VF-4B266VF-6B

Tube x FPT1/4 x 1/43/8 x 1/4

Part No.268VF-4A268VF-4B268VF-6A268VF-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/4

Male Connector

Part No.269VF-4A269VF-4B269VF-6A269VF-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/4

Part No.271VF-4A271VF-4B271VF-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/4

Male Run Tee - Tube x MPT x Tube

Male Branch Tee - Tube x Tube x MPTPart No.272VF-4A272VF-4B272VF-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/4

Fittings - Poly-Barb

Union - Tube Both EndsPart No.962-5/32962-4962-6962-4-5/32962-6-4

Tube Size5/321/43/8

1/4 x 5/323/8 x 1/4

Union Tee - Tube All EndsPart No.964-4964-6

Tube Size1/43/8

Union Elbow ( 90 Deg. ) - Tube Both EndsPart No.965-4965-6

Tube Size1/43/8

Female ConnectorPart No.966-4A

Tube x FPT1/4 x 1/8

Male ConnectorPart No.968-4A968-4B968-6A968-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/4

Male Elbow ( 90 Deg. )Part No.969-4A969-4B969-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/4

Male Elbow ( 90 Deg. )

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 15: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 15

Price / Each

Part No.PTC69S-2APTC69S-2BPTC69S-5/32APTC69S-5/32BPTC69S-4APTC69S-4BPTC69S-4CPTC69S-5APTC69S-5BPTC69S-5CPTC69S-6APTC69S-6BPTC69S-6CPTC69S-6DPTC69S-8BPTC69S-8CPTC69S-8D

Tube x MPT1/8 x 1/81/8 x 1/45/32 x 1/85/32 x 1/41/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/45/16 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Male Swivel Elbow - 90 Deg.

Male Rigid Elbow - 90 Deg.Part No.PTC69-4APTC69-4BPTC69-6BPTC69-6C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/8

Tube x MPT1/8 x 1/81/8 x 1/45/32 x 1/85/32 x 1/41/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/45/16 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Part No.PTC68-2APTC68-2BPTC68-5/32APTC68-5/32BPTC68-4APTC68-4BPTC68-4CPTC68-5APTC68-5BPTC68-5CPTC68-6APTC68-6BPTC68-6CPTC68-6DPTC68-8BPTC68-8CPTC68-8D

Male Connector

Fittings - Push To Connect

Union - Tube Both EndsPart No.PTC62-2PTC62-5/32PTC62-4PTC62-4-5/32PTC62-5PTC62-6PTC62-6-4PTC62-8PTC62-8-6

Tube Size1/85/321/4

1/4 x 5/325/163/8

3/8 x 1/41/2

1/2 x 3/8

Union Tee - Tube All EndsPart No.PTC64-2PTC64-5/32PTC64-4PTC64-5PTC64-6PTC64-8

Female ConnectorPart No.PTC66-2APTC66-2BPTC66-5/32APTC66-5/32BPTC66-4APTC66-4BPTC66-6BPTC66-6C

Tube x FPT1/8 x 1/81/8 x 1/45/32 x 1/85/32 x 1/41/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/8

Union Elbow 90 Deg. - Tube Both EndsPart No.PTC65-2PTC65-5/32PTC65-4PTC65-5PTC65-6PTC65-8

Tube Size1/85/321/45/163/81/2

Fittings - Push To Connect

Tube Size1/85/321/45/163/81/2

Page 16: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 16

Male Swivel Branch TeePart No.PTC72S-2APTC72S-2BPTC72S-5/32APTC72S-5/32BPTC72S-4APTC72S-4BPTC72S-6BPTC72S-6CPTC72S-6DPTC72S-8BPTC72S-8CPTC72S-8D

Tube x MPT1/8 x 1/81/8 x 1/45/32 x 1/85/32 x 1/41/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Male Swivel Run TeePart No.PTC71S-2APTC71S-2BPTC71S-5/32APTC71S-4APTC71S-4BPTC71S-6BPTC71S-6CPTC71S-6DPTC71S-8BPTC71S-8CPTC71S-8D

Tube x MPT1/8 x 1/81/8 x 1/45/32 x 1/81/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Female Swivel Elbow - 90 Deg.Part No.PTC70S-5/32APTC70S-5/32BPTC70S-4APTC70S-4BPTC70S-6APTC70S-6B

Tube x FPT5/32 x 1/85/32 x 1/41/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/4

Fittings - Push To Connect

Bulkhead UnionTube Size

1/85/321/45/163/81/2

Part No.PTC77-2PTC77-5/32PTC77-4PTC77-5PTC77-6PTC77-8

Fittings - Push To Connect

Page 17: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 17

Part No.240-A240-B240-C240-D

MPT1/81/43/81/2

External Seat

Part No.239-B

MPT1/4

Extended Bibb - External Seat

Part No.242-A242-B

All Brass - Internal SeatMPT1/81/4

Valves - Drain Cocks

Part No.243-A243-B

Internal SeatMPT1/81/4

Extended Bibb (90 Deg.) - Internal SeatMPT1/81/4

Part No.245-A245-B

Part No.2103-A2103-B

Part No.2120-A2120-B

FPT1/81/4

FPT x MPT1/8 x 1/81/4 x 1/4

Spring Bottom Valve - FPT x FPT

Spring Bottom Valve - FPT x MPT

Valves - Spring Bottom

Part No.241-A241-B241-C

Ground Plug Lever HandleMPT1/81/43/8

Part No.T241-B

Ground Plug “T” HandleMPT1/4

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 18: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 18

Valves - Needle

Female Pipe x Female PipePart No.3103-A3103-B

FPT1/81/4

FPT x MPT1/8 x 1/81/4 x 1/4

Part No.3120-A3120-B

Part No.3122-A3122-B

MPT1/81/4

Female Pipe x Male Pipe

Male Pipe x Male Pipe

Compression x CompressionPart No.3062-43062-6

Tube Size1/43/8

Straight - Compression x Male PipePart No.3068-4A3068-4B3068-6B

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/4

Part No.3069-4A3069-4B3069-6B

Elbow ( 90 Deg. ) - Compression x Male PipeTube x MPT

1/4 x 1/81/4 x 1/43/8 x 1/4

Part No.217-B217-C217-D217-E217-F217-G217-H217-I217-J217-K217-L

FPT Size1/43/81/23/41

1-1/41-1/2

22-1/2

34

Gate Valve - FPT x FPT- 200 WOG

Nom. (OD)1/2 (5/8)3/4 (7/8)1 (1-1/8)

Gate Valve - C x C - 200 WOGPart No. SW217-10SW217-14SW217-18

Part No.CSW217-10CSW217-14

Nom. (OD)1/2 (5/8)3/4 (7/8)

Brass Water Stop Valve - C x C

Valves - Water Stop

Valves - Gate

Drum and Barrel Faucet - Self ClosingPart No.G261

MPT3/4

Drum Faucet

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 19: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 19

Part No.224-D224-E

Boiler Drain Valve - 45°MGHT x MPT

3/4 x 1/23/4 x 3/4

FGHT x MGHT3/4 x 3/4

Part No.BVB-12

Brass Vacuum Breaker (Anti-Siphon Valve)

Valve - Brass Vacuum Breaker

Part No.293-D293-E293-F293-G293-H293-I

Brass Swing Check Valve - FPT x FPTPipe Size

1/23/41

1-1/41-1/2

2

Part No.SW293-10SW293-14SW293-18

Brass Swing Check Valve - C x CNom. (OD)

1/2 (5/8)3/4 (7/8)1 (1-1/8)

Valves - Boiler Drain

Valve - Tank

Tank Valve (Snifter Valve)Part No.684-B

DescriptionAir Valve x 1/4 MPT

Valves - Swing Check Ball Valves- Stainless Steel

SS316 Stainless Steel - Full Port - 1000 WOGFPT1/43/81/23/41

1-1/41-1/2

2

Part No.6SSBV2103-B-FP6SSBV2103-C-FP6SSBV2103-D-FP6SSBV2103-E-FP6SSBV2103-F-FP6SSBV2103-G-FP6SSBV2103-H-FP6SSBV2103-I-FP

Ball Valves - Full Port

Full Port Ball Valve -FPT x FPT - 600 WOGPart No. BV2103-B-FPBV2103-C-FPBV2103-D-FPBV2103-E-FPBV2103-F-FPBV2103-G-FPBV2103-H-FPBV2103-I-FPBV2103-J-FPBV2103-K-FPBV2103-L-FP

Full Port Ball Valve - C x C - 600 WOG

FPT Size1/43/81/23/41

1-1/41-1/2

22-1/2

34

Nom. (OD)1/2 (5/8)3/4 (7/8)1 (1-1/8)

1-1/4 (1-3/8)1-1/2 (1-5/8)

2 (2-1/8)

Part No. SWBV2103-10-FPSWBV2103-14-FPSWBV2103-18-FPSWBV2103-22-FPSWBV2103-26-FPSWBV2103-34-FP

Page 20: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 20

Part No.35C4-4F

Description1/4 Body x 1/4 FPT

Description1/4 Body x 1/4 Hose

Part No.35C4-4H

Female Coupler

Hose Coupler

Ball Valves - Gas - C.S.A. Approved(Formerly C.G.A.)

Indoor - Lever Handle - Flare x FPTPart No.BV4046-6DBV4046-8D

Tube OD x FPT3/8 x 1/21/2 x 1/2

Part No.BV4048-6DBV4048-8D

Tube OD x MPT3/8 x 1/21/2 x 1/2

Indoor - Lever Handle - Flare x MPT

Indoor - Lever Handle - FPT x FPTPart No.BV4103-CBV4103-DBV4103-EBV4103-F

FPT Size3/81/23/41

Valves - Truck

Part No.1049-6C1049-8C1049-10D

Tube x MPT3/8 x 3/81/2 x 3/85/8 x 1/2

Truck Valve ( 90 Deg. ) - Flare x MPT

Part No.1139-6C1139-10C1139-10D1139-12D

Hose I.D. x MPT3/8 x 3/85/8 x 3/85/8 x 1/23/4 x 1/2

Truck Valve ( 90 Deg. ) - Hose x MPT

Part No.2101-B2101-C

FPT1/43/8

Truck Valve 3-Way - FPT All Ends

Part No.2102-B2102-C

FPT1/43/8

Truck Valve 4-Way - FPT All Ends

Quick Disconnects - ARO 210 Interchange

Part No.BV2103-D-CGABV2103-E-CGABV2103-F-CGABV2103-G-CGABV2103-H-CGABV2103-I-CGA

FPT Size1/23/41

1-1/41-1/2

2

Outdoor - Lever Handle - FPT x FPT

Indoor - Lever Handle - Flare x FlarePart No.BV4042-6BV4042-8

Tube OD3/81/2

Page 21: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 21

Female NipplePart No.36N4-4F

Description1/4 Body x 1/4 FPT

Part No.36N4-4H

Part No.36N4-4M

Part No.36C4-4F

Part No.36C4-4H

Part No.36C4-4M

Hose Nipple

Male Nipple

Female Coupler

Hose Coupler

Male Coupler

Description1/4 Body x 1/4 Hose

Description1/4 Body x 1/4 MPT

Description1/4 Body x 1/4 FPT

Description1/4 Body x 1/4 Hose

Description1/4 Body x 1/4 MPT

Part No.51CW12-12F51CW16-16F51CW20-20F

Part No.51N12-12F51N16-16F51N20-20F

Female Wing Coupler

Female Nipple

Description3/4 Body x 3/4 FPT

1 Body x 1 FPT1-1/4 Body x 1-1/4 FPT

Description3/4 Body x 3/4 FPT

1 Body x 1 FPT1-1/4 Body x 1-1/4 FPT

Quick Disconnects - Snow Plow Set

Part No.40C4-4F40N4-4F

Description1/4 Body x 1/4 FPT Coupler1/4 Body x 1/4 FPT Nipple

Female Coupler / Nipple - 3000 WPSI

Quick Disconnects - Aeroquip 5100 Interchange

Description1/4 Body x 1/4 MPT

Part No.35N4-4M

Male Nipple

Quick Disconnects - ARO 210 Interchange

Quick Disconnects - Industrial Interchange

Female Nipple

Hose Nipple

Part No.35N4-4F

Description1/4 Body x 1/4 FPT

Part No.35N4-4H

Description1/4 Body x 1/4 Hose

Part No.35C4-4M

Description1/4 Body x 1/4 MPT

Male Coupler

Quick Disconnects - Industrial Interchange

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 22: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 22

Standard Ferrule NutPart No.361-2361-4361-5361-6361-8

Tube O.D.1/81/45/163/81/2

Part No.362-4362-4-2362-5362-5-4362-6362-6-4362-8362-8-6

Tube O.D.1/4

1/4 x 1/85/16

5/16 x 1/43/8

3/8 x 1/41/2

1/2 x 3/8

Standard Union - Tube Both Ends

Standard Union Tee - Tube All EndsPart No.364-2364-4364-5364-6364-8

Tube O.D.1/81/45/163/81/2

Part No.365-4365-5365-6365-8

Tube O.D.1/45/163/81/2

Standard Union Elbow 90° - Tube Both Ends

Part No.366-4A366-4B366-5B366-6B366-6C366-6D366-8C366-8D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Standard Female Connector - Tube x Female PipeStandard Blind Nut

Part No.361C-2361C-4361C-5361C-6361C-8

Tube O.D.1/81/45/163/81/2

Part No.368-2A368-4A368-4B368-4C368-5A368-5B368-6A368-6B368-6C368-6D368-8A368-8B368-8C368-8D

Standard Male Connector - Tube x Male PipeTube O.D. x MPT

1/8 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/81/2 x 1/41/2 x 3/81/2 x 1/2

Nylon Standard Compression FittingsNylon Standard Compression Fittings

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 23: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 23

Part No.369-2A369-4A369-4B369-4C369-5A369-5B369-6B369-6C369-8B369-8C369-8D

Standard Male Elbow 90° - Tube x Male PipeTube O.D. x MPT

1/8 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/2

Part No.370-2B370-4A370-4B370-5B370-6B370-6C370-8C370-8D

Tube O.D. x FPT1/8 x 1/41/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Standard Female Elbow 90° - Tube x Female Pipe

Part No.371-4A371-4B371-5B371-6B371-6C371-8C371-8D

Standard Male Run Tee - Tube x Male Pipe

Standard Male Branch Tee - Tube x Male Pipe

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Standard Bulkhead Union - Tube x TubePart No.377-4377-5377-6377-8

Tube O.D.1/45/163/81/2

Part No.372-4A372-4B372-5B372-6B372-6C372-8C372-8D

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Part No.381-4381-5381-6381-8

Tube O.D.1/45/163/81/2

Nylon Standard Compression Fittings

Inserts - Tube

Part No.377LN-4377LN-5377LN-6377LN-8377LN-12

Tube O.D.1/45/163/81/23/4

Standard Bulkhead Union Nut - Tube

Nylon Standard Compression Fittings

For alternate material, please prefi x the part number with “P” for Natural Polypropylene or “C” for Celcon (eg:P362-6).

Page 24: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 24

Plastic Gripper NutPart No.361PG-4361PG-5361PG-6361PG-8361PG-10361PG-12361PG-14

Tube O.D.1/45/163/81/25/83/47/8

Part No.362PG-4362PG-5362PG-5-4362PG-6362PG-6-4362PG-8362PG-8-6362PG-10362PG-10-6362PG-10-8362PG-12362PG-14362PG-14-10

Tube O.D.1/45/16

5/16 x 1/43/8

3/8 x 1/41/2

1/2 x 3/85/8

5/8 x 3/85/8 x 1/2

3/47/8

7/8 x 5/8

Plastic Gripper Union - Tube Both Ends

Plastic Gripper Union Tee - Tube All EndsPart No.364PG-4364PG-5364PG-6364PG-8364PG-10364PG-10-6364PG-12364PG-14364PG-14-10364PG-14-10-10

Tube O.D.1/45/163/81/25/8

5/8 x 3/83/47/8

7/8 x 7/8 x 5/87/8 x 5/8 x 5/8

Part No.365PG-4365PG-5365PG-6365PG-8365PG-10365PG-12365PG-14365PG-14-10

Tube O.D.1/45/163/81/25/83/47/8

7/8 x 5/8

Plastic Gripper Union Elbow 90° - Tube Both Ends

Part No.366PG-4A366PG-4B366PG-5B366PG-6B366PG-6C366PG-6D366PG-8C366PG-8D366PG-10D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/25/8 x 1/2

Plastic Gripper Female Connector - Tube x Female Pipe

Part No.368PG-4A368PG-4B368PG-4C368PG-5A368PG-5B368PG-6A368PG-6B368PG-6C368PG-6D368PG-8A368PG-8B368PG-8C368PG-8D368PG-10C368PG-10D368PG-12D368PG-12E368PG-14E

Plastic Gripper Male Connector - Tube x Male PipeTube O.D. x MPT

1/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/81/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/23/4 x 1/23/4 x 3/47/8 x 3/4

Nylon Higher Pressure CompressionFittings - Plastic Tube

Nylon Higher Pressure CompressionFittings - Plastic Tube

Page 25: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 25

Part No.370PG-4A370PG-4B370PG-5B370PG-6B370PG-6C370PG-8C370PG-8D370PG-10D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/2

Plastic Gripper Female Elbow 90° - Tube x Female Pipe

Part No.371PG-4A371PG-4B371PG-5B371PG-6B371PG-6C371PG-8C371PG-8D371PG-10D371PG-12D371PG-12E371PG-14E

Plastic Gripper Male Run Tee - Tube x Male PipeTube O.D. x MPT

1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/23/4 x 1/23/4 x 3/47/8 x 3/4

Plastic Gripper Male Branch Tee - Tube x Male PipePart No.372PG-4A372PG-4B372PG-5B372PG-6B372PG-6C372PG-8C372PG-8D372PG-10D

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/2

Plastic Gripper Bulkhead Union - Tube x TubePart No.377PG-4377PG-5377PG-6377PG-8377PG-12

Tube O.D.1/45/163/81/23/4

Nylon Higher Pressure CompressionFittings - Plastic Tube

For alternate material, please prefix the part number with “P” for Natural Polypropylene or “C” for Celcon (eg: P362PG-6). For hard surface tubing (hard plastic tube or soft metal tube), please replace the plastic gripper “PG” in the part number with the stainless gripper “SG” (eg: 362SG-6).

Kynar Standard Compression Fittings

Kynar Ferrule NutPart No.K361-2K361-4K361-5K361-6K361-8

Tube O.D.1/81/45/163/81/2

Kynar Cap NutPart No.K361C-2K361C-4K361C-5K361C-6K361C-8

Tube O.D.1/81/45/163/81/2

Nylon Higher Pressure CompressionFittings - Plastic Tube

Part No.369PG-4A369PG-4B369PG-4C369PG-5A369PG-5B369PG-6B369PG-6C369PG-8B369PG-8C369PG-8D369PG-10C369PG-10D

Plastic Gripper Male Elbow 90° - Tube x Male PipeTube O.D. x MPT

1/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/2

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 26: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 26

Part No.K362-4K362-4-2K362-5K362-5-4K362-6K362-6-4K362-8K362-8-6

Tube O.D.1/4

1/4 x 1/85/16

5/16 x 1/43/8

3/8 x 1/41/2

1/2 x 3/8

Kynar Union - Tube Both Ends

Kynar Union Tee - Tube All EndsPart No.K364-2K364-4K364-5K364-6K364-8

Tube O.D.1/81/45/163/81/2

Part No.K365-4K365-5K365-6K365-8

Tube O.D.1/45/163/81/2

Kynar Union Elbow 90° - Tube Both Ends

Part No.K366-4AK366-4BK366-5BK366-6BK366-6CK366-6DK366-8CK366-8D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Kynar Female Connector - Tube x Female Pipe

Kynar Standard Compression Fittings

Part No.K369-2AK369-4AK369-4BK369-4CK369-5AK369-5BK369-6BK369-6CK369-8BK369-8CK369-8D

Kynar Male Elbow 90° - Tube x Male PipeTube O.D. x MPT

1/8 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/2

Part No.K370-2BK370-4AK370-4BK370-5BK370-6BK370-6CK370-8CK370-8D

Tube O.D. x FPT1/8 x 1/41/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Kynar Female Elbow 90° - Tube x Female Pipe

Part No.K368-2AK368-4AK368-4BK368-4C K368-5AK368-5BK368-6AK368-6BK368-6CK368-6DK368-8AK368-8BK368-8CK368-8D

Kynar Male Connector - Tube x Male PipeTube O.D. x MPT

1/8 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/81/2 x 1/41/2 x 3/81/2 x 1/2

Kynar Standard Compression Fittings

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 27: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 27

Kynar Bulkhead Union - Tube x TubePart No.K377-4K377-5K377-6K377-8

Tube O.D.1/45/163/81/2

Part No.K377LN-4K377LN-5K377LN-6K377LN-8K377LN-12

Tube O.D.1/45/163/81/23/4

Kynar Bulkhead Union Nut - Tube

Kynar Standard Compression Fittings

Part No.K381-4K381-5K381-6K381-8

Tube O.D.1/45/163/81/2

Kynar Inserts - Tube

Plastic Gripper NutPart No.K361PG-4K361PG-5K361PG-6K361PG-8K361PG-10K361PG-12K361PG-14

Tube O.D.1/45/163/81/25/83/47/8

Part No.K362PG-4K362PG-5K362PG-5-4K362PG-6 K362PG-6-4K362PG-8K362PG-8-6K362PG-10K362PG-10-6K362PG-10-8K362PG-12K362PG-14K362PG-14-10

Tube O.D.1/45/16

5/16 x 1/43/8

3/8 x 1/41/2

1/2 x 3/85/8

5/8 x 3/85/8 x 1/2

3/47/8

7/8 x 5/8

Plastic Gripper Union - Tube Both Ends

Part No.K371-4AK371-4BK371-5BK371-6BK371-6CK371-8CK371-8D

Kynar Male Run Tee - Tube x Male Pipe

Kynar Male Branch Tee - Tube x Male Pipe

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Part No.K372-4AK372-4BK372-5BK372-6BK372-6CK372-8CK372-8D

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Kynar Standard Compression Fittings

Kynar Higher Pressure CompressionFittings - Plastic Tube

Page 28: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 28

Plastic Gripper Union Tee - Tube All EndsPart No.K364PG-4K364PG-5K364PG-6K364PG-8K364PG-10K364PG-10-6K364PG-12K364PG-14K364PG-14-10K364PG-14-10-10

Tube O.D.1/45/163/81/25/8

5/8 x 3/83/47/8

7/8 x 7/8 x 5/87/8 x 5/8 x 5/8

Part No.K365PG-4K365PG-5K365PG-6K365PG-8K365PG-10K365PG-12K365PG-14K365PG-14-10

Tube O.D.1/45/163/81/25/83/47/8

7/8 x 5/8

Plastic Gripper Union Elbow 90° - Tube Both Ends

Part No.K366PG-4AK366PG-4BK366PG-5BK366PG-6BK366PG-6CK366PG-6DK366PG-8CK366PG-8DK366PG-10D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/25/8 x 1/2

Plastic Gripper Female Connector - Tube x Female Pipe

Part No.K368PG-4AK368PG-4BK368PG-4CK368PG-5AK368PG-5BK368PG-6AK368PG-6BK368PG-6CK368PG-6DK368PG-8AK368PG-8BK368PG-8CK368PG-8DK368PG-10CK368PG-10DK368PG-12DK368PG-12EK368PG-14E

Plastic Gripper Male Connector - Tube x Male PipeTube O.D. x MPT

1/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/81/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/23/4 x 1/23/4 x 3/47/8 x 3/4

Part No.K369PG-4AK369PG-4BK369PG-4CK369PG-5AK369PG-5BK369PG-6BK369PG-6CK369PG-8BK369PG-8CK369PG-8DK369PG-10CK369PG-10D

Plastic Gripper Male Elbow 90° - Tube x Male PipeTube O.D. x MPT

1/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/43/8 x 3/81/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/2

Kynar Higher Pressure CompressionFittings - Plastic Tube

Kynar Higher Pressure CompressionFittings - Plastic Tube

Page 29: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 29

Plastic Gripper Bulkhead Union - Tube x TubePart No.K377PG-4K377PG-5K377PG-6K377PG-8K377PG-12

Tube O.D.1/45/163/81/23/4

Kynar Higher Pressure CompressionFittings - Plastic Tube

For hard surface tubing (hard plastic tube or soft metal tube), please replace the plastic gripper “PG” in the part number with the stainless gripper “SG”(eg: K362SG-6)

Kynar Check Valves - Viton O-Ring

220 PSI@180°F - 1-2.5 PSI Crack - Male x Male PipePart No.KCV-AKCV-BKCV-CKCV-D

MPT1/81/43/81/2

Part No.K370PG-4AK370PG-4BK370PG-5BK370PG-6BK370PG-6CK370PG-8CK370PG-8DK370PG-10D

Tube O.D. x FPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/2

Plastic Gripper Female Elbow 90° - Tube x Female Pipe

Part No.K371PG-4AK371PG-4BK371PG-5BK371PG-6BK371PG-6CK371PG-8CK371PG-8DK371PG-10DK371PG-12DK371PG-12EK371PG-14E

Plastic Gripper Male Run Tee - Tube x Male PipeTube O.D. x MPT

1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/23/4 x 1/23/4 x 3/47/8 x 3/4

Plastic Gripper Male Branch Tee - Tube x Male PipePart No.K372PG-4AK372PG-4BK372PG-5BK372PG-6BK372PG-6CK372PG-8CK372PG-8DK372PG-10D

Tube O.D. x MPT1/4 x 1/81/4 x 1/45/16 x 1/43/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/2

Kynar Higher Pressure CompressionFittings - Plastic Tube

Nylon Pipe Fittings

Hex Pipe Bushing - Male x Female PipePart No.N110-BAN110-CAN110-CBN110-DAN110-DBN110-DCN110-EAN110-EBN110-ECN110-ED

MPT x FPT1/4 x 1/83/8 x 1/83/8 x 1/41/2 x 1/81/2 x 1/41/2 x 3/83/4 x 1/83/4 x 1/43/4 x 3/83/4 x 1/2

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 30: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 30

Hex Pipe Plug - Male PipePart No.N121-AN121-BN121-CN121-D

MPT1/81/43/81/2

Hex Pipe Nipple - Male x Male PipePart No.N122-AN122-BN122-BAN122-CN122-CAN122-CBN122-DN122-DAN122-DBN122-DCN122-EN122-ECN122-EDN122-F

MPT1/81/4

1/4 x 1/83/8

3/8 x 1/83/8 x 1/4

1/21/2 x 1/81/2 x 1/41/2 x 3/8

3/43/4 x 3/83/4 x 1/2

1

Nylon Pipe Fittings

For alternate material, please prefi x the part number with “P” for Black Polyethylene (eg: P122-B). Other materials may also be available.

Nylon Hose Barb Fittings

Hose Barb Tee - Hose All EndsPart No.N123-2N123-5/32N123-3N123-4N123-5N123-6N123-8N123-10N123-12N123-16

MPT1/85/323/161/45/163/81/25/83/41

Male Hose Barb - Hose x Male PipePart No.N125-3AN125-3BN125-4AN125-4BN125-4CN125-4DN125-5AN125-5BN125-5CN125-6AN125-6BN125-6CN125-6DN125-8CN125-8DN125-10DN125-10EN125-12EN125-16F

Hose ID x MPT3/16 x 1/83/16 x 1/41/4 x 1/81/4 x 1/41/4 x 3/81/4 x 1/25/16 x 1/85/16 x 1/45/16 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/25/8 x1/25/8 x 3/43/4 x 3/4

1 x 1

Hose Barb Mender - Hose Both EndsPart No.N129-2N129-3N129-4N129-5N129-6N129-8N129-10N129-12N129-16

MPT1/83/161/45/163/81/25/83/41

Nylon Hose Barb Fittings

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 31: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 31

Male Hose Barb Elbow 90° - Hose x Male PipePart No.N139-3AN139-4AN139-4BN139-4CN139-5AN139-5BN139-6AN139-6BN139-6CN139-6DN139-6EN139-8CN139-8DN139-8EN139-10DN139-10EN139-12DN139-12EN139-16EN139-16F

Hose ID x MPT3/16 x 1/81/4 x 1/81/4 x 1/41/4 x 3/85/16 x 1/85/16 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/23/8 x 3/41/2 x 3/81/2 x 1/21/2 x 3/45/8 x1/25/8 x 3/43/4 x 1/23/4 x 3/41 x 3/41 x 1

Part No.N139T-4N139T-6N139T-8N139T-10N139T-12N139T-16

Hose ID1/43/81/25/83/41

Hose Barb Elbow 90° - Hose Both Ends

Nylon Garden Hose Fittings

Nylon Hose Barb Fittings

For alternate material, please prefi x the part number with “P” for Black Polyethylene (eg: P125-4B). Other materials may also be available.

Part No.N193-4N193-6N193-8N193-10N193-12

Hose ID x MGHT1/4 x 3/43/8 x 3/41/2 x 3/45/8 x 3/43/4 x 3/4

Part No.N195-4N195-6N195-8N195-10N195-12

Hose ID x FGHT1/4 x 3/43/8 x 3/41/2 x 3/45/8 x 3/43/4 x 3/4

Female Garden Hose Barb - Hose x Female GHT

Part No.N196-CN196-DN196-E

MPT x MGHT3/8 x 3/41/2 x 3/43/4 x 3/4

Male Garden Hose Adaptor - Male Pipe x Male GHT

Part No.N200-W

FGHT3/4

Garden Hose Cap - Female GHT

For alternate material, please prefi x the part number with “P” for Black Polyethylene (eg: P193-8). Other materials may also be available.

Male Garden Hose Barb - Hose x Male GHT

Part No.DE70C-10D

** Brass Drop Ear Elbow 90° - C x FPT

** Brass Drop Ear Elbow 90° - C x C Part No.DE65C-10

Copper x FPT1/2 x 1/2

Copper Pipe Size1/2

Drop Ear Fittings

Nylon Garden Hose Fittings

** Not Lead Free - Please Contact Customer Service For Pricing and Availability On Lead Free Pattern

Page 32: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 32

** Compression Adaptor - Male Comp. x Female FlarePart No.201-80

Tube O.D.3/8Comp x 1/4Flare

** Compression Adaptor - Male Comp. x Female Comp.Part No.201-79

Tube O.D. 3/8Male x 1/4Fem

Tube O.D.1/43/81/25/8

Part No.C61-4C61-6C61-8C61-10

** Compression Cap

Brass Compression Adaptors

** Compression Adaptor - Compression x CopperPart No.66BS-10-6

Tube OD x * Copper3/8 x 1/2

** Brass Insert

Tube O.D.1/43/81/25/8

Part No.481-4481-6481-8481-10

Tube O.D.1/43/81/25/8

Part No.480-4480-6480-8480-10

Delrin Compression Sleeve

Nickel Plated Brasss Compression Fittings

Part No.61P-661P-861P-10

Tube O.D.3/81/25/8

** Nut

** Reducing UnionPart No.62P-10-6

Tube O.D.5/8 x 3/8

Part No.65P-10-6

Tube OD Size5/8 x 3/8

** Plated Compression Reducing Union Elbow 90°

Part No.66BSP-10-6

Copper x Tube OD1/2 (5/8OD) x 3/8

** Plated Sweat x Compression Adaptor

** Elbow 90 Deg.Part No.69P-6C

Tube O.D. x MPT3/8 x 3/8

Part No.68P-6C68P-6D

Tube O.D. x MPT3/8 x 3/83/8 x 1/2

** Connector

** Not Lead Free - Please Contact Customer Service For Pricing and Availability On Lead Free Pattern

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 33: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 33

** Tub Spout NipplesPart No.113-D31/4SP113-D41/2SP

MPT x Length(inch)1/2 x 3-1/41/2 x 4-1/2

** Faucet Tailpiece Coupling NutPart No.700-01

Thread Size1/2 NPS

Thread Size15/16-14

Part No.700-02

** Ballcock Coupling Nut

** Faucet Tailpiece LocknutThread Size

1/2 NPSPart No.700-06

** Emco Faucet SeatsPart No.EMCO SEATS

Thread Size9/16-27

Humidifi er Accessories

** Humidifi er Bushing - SolderPart No.700-03

FTG x FPT1/2 (5/8 OD) x 1/8

** Humidifi er ValvePart No.3069-4T

Tube OD x MPT1/4 x 1/8

** Self-Piercing Humidifi er Valve KitPart No.S3069-ST-4

Tube O.D. x Copper1/4 x 1/2

Part No.S3069-PC

Copper x FPT Tap1/2 (5/8 OD) x 1/8

Steel Clamp Assembly

Part No.R15-5

Sealing Washer - Between Pipe And Clamp Description

Washer for S3069-4T

Faucet Accessories

Part No.WALTEC SEATS

Thread Size9/16-24

** Waltec Faucet Seats

Brass Bar Stock Fittings

Brass Closet BoltPart No.CLOSET BOLT

Tube O.D.5/16 x 2-1/4” long

Brass Closet BoltPart No.66BS-10D66BS-10E66BS-14D66BS-14E

** Female Adaptor - C x FPTCopper x Female Pipe1/2 (5/8 OD) x 1/21/2 (5/8 OD) x 3/43/4 (7/8 OD) x 1/23/4 (7/8 OD) x 3/4

** Not Lead Free - Please Contact CustomerService For Pricing and Availability On Lead Free Pattern

Page 34: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 34

Please Note: All copper pipe sizes are nominal pipe dimensions.

Part No.104BS-10104BS-14

Part No.68BS-10D68BS-10E68BS-14D68BS-14E

** Male Adaptor - C x MPT

** Union (3 Piece) - C x C

Copper x Male Pipe1/2 (5/8 OD) x 1/21/2 (5/8 OD) x 3/43/4 (7/8 OD) x 1/23/4 (7/8 OD) x 3/4

Copper Pipe Size1/2 (5/8 OD)3/4 (7/8 OD)

Bar Stock Fittings

Pex Pipe

SDR 9 Crosslinked (Silane Method) Non-BarrierPart No.PEX-8X100PEX-8BLX100PEX-8REDX100PEX-12X100PEX-12BLX100PEX-12REDX100

Size x Length x Colour1/2 x 100 ft x White1/2 x 100 ft x Blue1/2 x 100 ft x Red

3/4 x 100 ft x White3/4 x 100 ft x Blue3/8 x 100 ft x Red

Please Note:Also available in 20 ft. and 250 ft. coils

Red Oxygen BarrierPart No.HPEX-8X250HPEX-12X250

Please Note: Also available in 500 ft. and 1000 ft. coils

Size x Length1/2 x 250 ft3/4 x 250 ft

PEX Fittings & Accessories

** Test PlugPart No.PEX109-8PEX109-12

Size1/23/4

** Male Sweat CouplingPart No.PEX125BS-8-10PEX125BS-8-14PEX125BS-12-10PEX125BS-12-14

Pex x Copper1/2 x 1/2 (5/8 OD)1/2 x 3/4 (7/8 OD)3/4 x 1/2 (5/8 OD)3/4 x 3/4 (7/8 OD)

** Male Pipe AdaptorPart No.PEX125-8DPEX125-8EPEX125-12DPEX125-12E

Pex x MPT1/2 x 1/21/2 x 3/43/4 x 1/23/4 x 3/4

** Female Pipe AdaptorPart No.PEX126-8DPEX126-8EPEX126-12E

Pex x FPT1/2 x 1/21/2 x 3/43/4 x 3/4

** TeePart No.PEX123-8PEX123-12PEX123-12-8PEX123-12-8-8PEX123-12-8-12

Size1/23/4

3/4 x 1/23/4 x 1/2 x 1/23/4 x 1/2 x 3/4

** Not Lead Free - Please Contact Customer Service For Pricing and Availability On Lead Free Pattern

Page 35: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 35

PEX Fittings & Accessories

Pex Stub Outs and Nickel Plated SleevesPart No.PEXSTUBOUTFLG-8

PEXSTUBOUTFLG-12

PEXPLATEDSLV-8

PEXPLATEDSLV-12

Size1/2

3-1/2” x 6” x 1-1/4 Sq. Flange3/4

4-1/2” x 8” x 1-1/4 Sq. Flange1/2

12” Long3/4

12” Long

** Coupling - PEX x PEXPart No.PEX129-8PEX129-12PEX129-12-8

Size1/23/4

3/4 x 1/2

Pex Pipe Hook - C/W NailPart No.PEXHOOK-8PEXHOOK-12

Size1/23/4

** Female Sweat Coupling - PEX x CopperPart No.PEX126BS-8-10PEX126BS-8-14PEX126BS-12-10PEX126BS-12-14

Pex x Copper1/2 x 1/2 (5/8 OD)1/2 x 3/4 (7/8 OD)3/4 x 1/2 (5/8 OD)3/4 x 3/4 (7/8 OD)

** Union Elbow - PEX x PEXPart No.PEX139T-8PEX139T-12PEX139T-12-8

Size1/23/4

3/4 x 1/2

** Pex Ball Valve - PEX x PEXPart No.PEXBV2103-8PEXBV2103-12

Size1/23/4

** PEX 1/4 Turn Stop ValvePart No.PEXBV62-8

PEXBV68-86

PEXBV69-86

Description1/2 PEX x 1/2 PEX

Straight1/2 PEX x 3/8 Comp

Straight1/2 PEX x 3/8 Comp

90° Degree

Black Copper PEX Crimp RingPart No.PEX RING-8PEX RING-12

Size1/23/4

Oetiker Style PEX Clamp RingPart No.PEX RING-OE-8PEX RING-OE-12PEX RING-OE-16

Size1/23/41

PEX Fittings & Accessories

** Not Lead Free - Please Contact Customer Service For Pricing and Availability On Lead Free Pattern

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 36: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Special Net Price Program -- 350315 Page 36Versa Fittings

Ask us for a copy of the John GuestPlumbing Catalogue for PEX

Push-to-connect for PEX!

Also available now...

John Guest Push To Connect

Page 37: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 37

Constant Tension Clamps

All Stainless - High TensionPart No.CTCH5-175X10CTCH5-212X10CTCH5-262X10CTCH5-312X10CTCH5-362X10CTCH5-412X10CTCH5-462X10CTCH5-512X10CTCH5-562X10CTCH5-612X10CTCH5-662X10CTCH5-712X10CTCH5-762X10CTCH5-812X10CTCH5-862X10CTCH5-912X10

Clamping Diameter1 - 1-3/4

1-1/4 - 2-1/81-3/4 - 2-5/82-1/4 - 3-1/82-3/4 - 3-5/83-1/4 - 4-1/83-3/4 - 4-5/84-1/4 - 5-1/84-3/4 - 5-5/85-1/4 - 6-1/85-3/4 - 6-5/86-1/4 - 7-1/86-3/4 - 7-5/87-1/4 - 8-1/87-3/4 - 8-5/88-1/4 - 9-1/8

Stainless Band/Housing/Spring - Plated Screw - High TensionPart No.CTCH6-175X10CTCH6-212X10CTCH6-262X10CTCH6-312X10CTCH6-362X10CTCH6-412X10CTCH6-462X10CTCH6-512X10CTCH6-562X10CTCH6-612X10CTCH6-662X10CTCH6-712X10CTCH6-762X10CTCH6-812X10CTCH6-862X10CTCH6-912X10

Clamping Diameter1 - 1-3/4

1-1/4 - 2-1/81-3/4 - 2-5/82-1/4 - 3-1/82-3/4 - 3-5/83-1/4 - 4-1/83-3/4 - 4-5/84-1/4 - 5-1/84-3/4 - 5-5/85-1/4 - 6-1/85-3/4 - 6-5/86-1/4 - 7-1/86-3/4 - 7-5/87-1/4 - 8-1/87-3/4 - 8-5/88-1/4 - 9-1/8

Part No.HC8-6HC8-8HC8-10HC8-12HC8-14HC8-16HC8-18HC8-20HC8-22HC8-24HC8-26HC8-28HC8-32HC8-36

Clamping Diameter8.9-10.5mm11.4-13.3mm15.1-17.0mm17.0-19.8mm19.8-22.6mm22.8-25.6mm25.5-28.6mm28.5-31.6mm31.5-34.6mm35.0-38.1mm37.9-41.0mm42.4-45.4mm48.4-51.5mm54.4-57.5mm

1 Ear (Mechanical Interlock) - Galvanized

“O” Clamps

SmartSeal™ Constant Tension Clamps

All StainlessPart No.SSTC5-20X10SSTC5-22X10SSTC5-24X10SSTC5-28X10SSTC5-32X10SSTC5-34X10SSTC5-36X10SSTC5-40X10SSTC5-44X10SSTC5-48X10SSTC5-52X10SSTC5-56X10SSTC5-60X10SSTC5-64X10SSTC5-72X10SSTC5-80X10SSTC5-88X10

Clamping Diameter1-1/16 - 1-9/161-1/8 - 1-11/161-31/6 - 1-13/161-5/16 - 2-1/161-9/16 - 2-5/161-5/8 - 2-7/161-11/16 - 2-9/161-13/16 - 2-13/162-1/16 - 3-1/162-3/16 - 3-5/162-3/8 - 3-9/162-1/2 - 3-13/162-11/16 - 4-1/162-13/16 - 4-5/163-3/16 - 4-13/163-9/16 - 5-5/163-13/16 - 5-13/16

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 38: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 38

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Part No.HC9-3HC9-4HC9-5HC9-6HC9-8HC9-9HC9-91/2HC9-10HC9-12HC9-13HC9-14HC9-15HC9-16HC9-17HC9-18HC9-21HC9-23HC9-24HC9-26HC9-28

2 Ear - Zinc PlatedClamping Diameter

3.4-5.0mm5.0-7.0mm7.0-9.0mm8.1-11.0mm

10.8-13.0mm12.5-15.0mm14.0-17.0mm15.0-18.0mm16.2-20.0mm18.0-22.0mm19.0-23.0mm21.0-25.0mm22.5-27.0mm24.0-28.0mm26.3-31.0mm29.3-34.0mm32.0-37.0mm35.0-40.0mm37.6-43.0mm40.6-46.0mm

“O” Clamps

“O” Clamps - 2 Ear Service Kit

Kit Contains: 1 Pincer (Straight Or Side Jaw - See Description) 2 Ear “O” Clamps (HC9 Series) In Following Quantities 15 pcs. each of: 5/16 (-5), 3/8 (-6), 1/2 (-8), 9/16 (-9), 5/8 (-10) 12 pcs. each of: 3/4 (-12), 7/8 (-14), 15/16 (-15), 1 (-16)

Part No.SK1098SK1099

DescriptionStraight Jaw Pincer

Side Jaw Pincer

“O” Clamps - Crimping Pincers

Crimping PincersPart No.HC9-RHHC9-S

DescriptionStraight Jaw Pincer

Side Jaw Pincer

All StainlessPart No.* HC5-4* HC5-6HC5-6WHC5-8HC5-10HC5-12HC5-16HC5-20HC5-24HC5-28HC5-32HC5-36HC5-40HC5-44HC5-48HC5-52HC5-56HC5-60HC5-64HC5-72HC5-80HC5-88HC5-96HC5-104

* HC5-4X10* HC5-6X10HC5-6WX10HC5-8X10HC5-10X10HC5-12X10HC5-16X10HC5-20X10HC5-24X10HC5-28X10HC5-32X10HC5-36X10HC5-40X10HC5-44X10HC5-48X10HC5-52X10HC5-56X10HC5-60X10HC5-64X10HC5-72X10HC5-80X10HC5-88X10HC5-96X10HC5-104X10

Clamping Diameter1/4 - 5/85/16 - 7/83/8 - 7/87/16 - 1

1/2 - 1-1/161/2 - 1-1/4

11/16 - 1-1/23/4 - 1-3/4

1 - 21-1/4 - 2-1/41-1/2 - 2-1/21-3/4 - 2-3/4

2 - 32-1/4 - 3-1/42-1/2 - 3-1/22-3/4 - 3-3/4

3 - 43-1/4 - 4-1/42-1/2 - 4-1/2

3 - 53-1/2 - 5-1/2

4 - 64-1/2 - 6-1/2

5 - 7

1/4 - 5/85/16 - 7/83/8 - 7/87/16 - 1

1/2 - 1-1/161/2 - 1-1/4

11/16 - 1-1/23/4 - 1-3/4

1 - 21-1/4 - 2-1/41-1/2 - 2-1/21-3/4 - 2-3/4

2 - 32-1/4 - 3-1/42-1/2 - 3-1/22-3/4 - 3-3/4

3 - 43-1/4 - 4-1/42-1/2 - 4-1/2

3 - 53-1/2 - 5-1/2

4 - 64-1/2 - 6-1/2

5 - 7* These Clamps Have Narrow Bands

Gear Clamps

Page 39: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 39

* These Clamps Have Narrow Bands

Stainless Band & Plated ScrewPart No.* HC6-4* HC6-6HC6-6WHC6-8HC6-10HC6-12HC6-16HC6-20HC6-24HC6-28HC6-32HC6-36HC6-40HC6-44HC6-48HC6-52HC6-56HC6-60HC6-64HC6-72HC6-80HC6-88HC6-96HC6-104

* HC6-4X10* HC6-6X10HC6-6WX10HC6-8X10HC6-10X10HC6-12X10HC6-16X10HC6-20X10HC6-24X10HC6-28X10HC6-32X10HC6-36X10HC6-40X10HC6-44X10HC6-48X10HC6-52X10HC6-56X10HC6-60X10HC6-64X10HC6-72X10HC6-80X10HC6-88X10HC6-96X10HC6-104X10

Clamping Diameter1/4 - 5/85/16 - 7/83/8 - 7/87/16 - 1

1/2 - 1-1/161/2 - 1-1/4

11/16 - 1-1/23/4 - 1-3/4

1 - 21-1/4 - 2-1/41-1/2 - 2-1/21-3/4 - 2-3/4

2 - 32-1/4 - 3-1/42-1/2 - 3-1/22-3/4 - 3-3/4

3 - 43-1/4 - 4-1/42-1/2 - 4-1/2

3 - 53-1/2 - 5-1/2

4 - 64-1/2 - 6-1/2

5 - 7

1/4 - 5/85/16 - 7/83/8 - 7/87/16 - 1

1/2 - 1-1/161/2 - 1-1/4

11/16 - 1-1/23/4 - 1-3/4

1 - 21-1/4 - 2-1/41-1/2 - 2-1/21-3/4 - 2-3/4

2 - 32-1/4 - 3-1/42-1/2 - 3-1/22-3/4 - 3-3/4

3 - 43-1/4 - 4-1/42-1/2 - 4-1/2

3 - 53-1/2 - 5-1/2

4 - 64-1/2 - 6-1/2

5 - 7

Gear Clamps

Large Hose Clamp Rack- holds 250 of the most popular size gear clamps- sold empty or c/w all stainless or plated screw gear clamp 450pc. assortments

Part No.LCR-EMPTY

LCR-HC5

LCR-HC6

DescriptionEmpty rack

Rack & all stainless gear clamp ass’t

Rack & plated screw gear clamp ass’t

Gear Clamp Racks

Small Hose Clamp Rack- holds 130 of the most popular size clamps- sold empty or c/w all stainless or plated screw gear clamp 250pc. assortments

Part No.SCR-EMPTY

SCR-HC5

SCR-HC6

DescriptionEmpty rack

Rack & all stainless gear clamp ass’t

Rack & plated screw gear clamp ass’t

Page 40: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 40

Part No.HDTC6-138X10HDTC6-150X10HDTC6-163X10HDTC6-175X10HDTC6-188X10HDTC6-200X10HDTC6-213X10HDTC6-225X10HDTC6-238X10HDTC6-250X10HDTC6-263X10HDTC6-275X10HDTC6-288X10HDTC6-300X10HDTC6-313X10HDTC6-325X10HDTC6-338X10HDTC6-350X10HDTC6-363X10HDTC6-375X10HDTC6-400X10HDTC6-425X10HDTC6-450X10HDTC6-475X10HDTC6-500X10HDTC6-525X10HDTC6-550X10HDTC6-575X10HDTC6-600X10HDTC6-625X10HDTC6-650X10HDTC6-675X10HDTC6-700X10HDTC6-725X10HDTC6-750X10HDTC6-775X10HDTC6-800X10HDTC6-825X10HDTC6-850X10

Clamping Diameter35.1-39.9mm38.1-42.9mm41.3-47.8mm44.5-50.8mm47.6-55.6mm50.8-58.7mm54.1-62.0mm57.2-65.0mm60.3-68.3mm63.5-71.4mm66.7-74.7mm69.9-77.7mm73.0-81.0mm76.2-84.1mm79.4-87.4mm82.6-90.4mm85.7-93.7mm88.9-96.8mm92.1-100.1mm95.3-103.1mm101.6-109.5mm108.0-115.8mm114.3-122.2mm120.7-128.5mm127.0-134.9mm133.4-141.2mm139.7-147.6mm146.1-153.9mm152.4-160.3mm158.8-166.6mm165.1-173.0mm171.5-179.3mm177.8-185.7mm184.2-192.0mm190.5-198.4mm196.9-204.7mm203.2-211.1mm209.6-217.4mm215.9-223.8mm

Stainless Bolt/Band/Housing - Plated Screw/Trunnion

T-Bolt Clamps

Part No.HDTC5-138X10HDTC5-150X10HDTC5-163X10HDTC5-175X10HDTC5-188X10HDTC5-200X10HDTC5-213X10HDTC5-225X10HDTC5-238X10HDTC5-250X10HDTC5-263X10HDTC5-275X10HDTC5-288X10HDTC5-300X10HDTC5-313X10HDTC5-325X10HDTC5-338X10HDTC5-350X10HDTC5-363X10HDTC5-375X10HDTC5-400X10HDTC5-425X10HDTC5-450X10HDTC5-475X10HDTC5-500X10HDTC5-525X10HDTC5-550X10HDTC5-575X10HDTC5-600X10HDTC5-625X10HDTC5-650X10HDTC5-675X10HDTC5-700X10HDTC5-725X10HDTC5-750X10HDTC5-775X10HDTC5-800X10HDTC5-825X10HDTC5-850X10

Clamping Diameter35.1-39.9mm38.1-42.9mm41.3-47.8mm44.5-50.8mm47.6-55.6mm50.8-58.7mm54.1-62.0mm57.2-65.0mm60.3-68.3mm63.5-71.4mm66.7-74.7mm69.9-77.7mm73.0-81.0mm76.2-84.1mm79.4-87.4mm82.6-90.4mm85.7-93.7mm88.9-96.8mm92.1-100.1mm95.3-103.1mm101.6-109.5mm108.0-115.8mm114.3-122.2mm120.7-128.5mm127.0-134.9mm133.4-141.2mm139.7-147.6mm146.1-153.9mm152.4-160.3mm158.8-166.6mm165.1-173.0mm171.5-179.3mm177.8-185.7mm184.2-192.0mm190.5-198.4mm196.9-204.7mm203.2-211.1mm209.6-217.4mm215.9-223.8mm

All Stainless

T-Bolt Clamps

Page 41: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 41

Part No.HC7-6HC7-8HC7-10HC7-12HC7-16HC7-20HC7-24HC7-28HC7-32HC7-36HC7-40HC7-44HC7-48HC7-52HC7-56HC7-60HC7-64HC7-72

Stainless Band/Housing & Plated Screw Clamping Diameter

5/8 - 3/45/8 - 13/163/4 - 15/167/8 - 1-1/81 - 1-3/8

1-1/8 - 1-5/81-1/4 - 1-15/161-5/6 - 2-1/41-9/6 - 2-1/2

1-13/16 - 2-3/42-1/16 - 3

2-5/16 - 3-1/42-9/16 - 3-1/22-13/16 - 3-3/4

3-1/16 - 43-9/16 - 4-1/43-9/16 - 4-1/2

4-1/16 - 5

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Lined Gear Clamps

All StainlessPart No.HC7-6SSHC7-8SSHC7-10SSHC7-12SSHC7-16SSHC7-20SSHC7-24SSHC7-28SSHC7-32SSHC7-36SSHC7-40SSHC7-44SSHC7-48SSHC7-52SSHC7-56SSHC7-60SSHC7-64SSHC7-72SS

Clamping Diameter5/8 - 3/4

5/8 - 13/163/4 - 15/167/8 - 1-1/81 - 1-3/8

1-1/8 - 1-5/81-1/4 - 1-15/161-5/6 - 2-1/41-9/6 - 2-1/2

1-13/16 - 2-3/42-1/16 - 3

2-5/16 - 3-1/42-9/16 - 3-1/22-13/16 - 3-3/4

3-1/16 - 43-9/16 - 4-1/43-9/16 - 4-1/2

4-1/16 - 5

Snaplock® Quick Release Clamps

All Stainless

Zinc Plated - EPDM Cushion - 1/4 Bolt HolePart No.TS17R-4TS17R-5TS17R-6TS17R-8TS17R-10TS17R-12TS17R-14TS17R-16TS17R-18TS17R-20TS17R-24TS17R-28TS17R-32TS17R-38TS17R-40TS17R-48TS17R-64

Clamping Diameter1/45/163/81/25/83/47/81

1-1/81-1/41-1/21-3/4

22-3/82-1/2

34

Part No.SLHC5-36SLHC5-72SLHC5-88SLHC5-104SLHC5-128SLHC5-152SLHC5-188

Clamping Diameter1 - 2-3/4

2 - 52 - 6

2-7/8 - 71-3/4 - 8-1/2

2 - 102 - 12-1/4

Stainless Band - Plated Screw/BridgePart No.SLHC6-36SLHC6-72SLHC6-88SLHC6-104SLHC6-128SLHC6-152SLHC6-188

Clamping Diameter1 - 2-3/4

2 - 52 - 6

2-7/8 - 71-3/4 - 8-1/2

2 - 102 - 12-1/4

Wrap Around Clamps

Page 42: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 42

Hangers and Accessories

Clevis Hangers For Steel Pipe

Part No.MPCC-3/8

Standard Universal Beam Clamp

Part No.MPCLEVIS-DMPCLEVIS-EMPCLEVIS-FMPCLEVIS-GMPCLEVIS-HMPCLEVIS-IMPCLEVIS-JMPCLEVIS-KMPCLEVIS-L

Pipe Size1/23/41

1-1/41-1/2

22-1/2

34

Part No.THREAD ROD-3/8

Threaded Rod

** Please Note: All copper pipe sizes are nominal pipe dimensions.

Swivel Hangers For Copper Pipe Part No.CT69-10CT69-14CT69-18CT69-22CT69-26CT69-34

** Pipe Size1/23/41

1-1/41-1/2

2

Threaded Rod NutPart No.ROD NUT-3/8

Thread Rod Size3/8

Description3/8 x 10 ft.

Thread Rod Size3/8

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Brass Ferrules

Long Ferrules Part No.FBL-400FBL-425FBL-450FBL-475FBL-500FBL-525FBL-550FBL-575FBL-600FBL-625FBL-650FBL-675FBL-700FBL-725FBL-750FBL-775FBL-800FBL-825FBL-850FBL-875FBL-900FBL-925FBL-950FBL-975FBL-1000FBL-1050

I.D. x Length x Hole.400 x .718 x .265.425 x .718 x .265.450 x .718 x .328.475 x .718 x .328.500 x .718 x .328.525 x .718 x .406.550 x .718 x .406.575 x .968 x .406.600 x .968 x .453.625 x .968 x .453.650 x .968 x .453.675 x .968 x .500.700 x .968 x .500.725 x .968 x .500.750 x .968 x .500.775 x .968 x .593.800 x .968 x .593.825 x .968 x .687.850 x .968 x .687.875 x .968 x .750.900 x .968 x .750.925 x .968 x .750.950 x .968 x .750.975 x .968 x .8751.000 x .968 x .8751.050 x .968 x .875

Page 43: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 43

Part No.CS-8X25-22GCS-12X25-24G

Description1/2 x 25ft x 22 Gauge 3/4 x 25ft x 24 Gauge

Copper Strap

Nylon Coated Steel Strap Part No.NCS-8X25-24G

Description1/2 x 25ft x 24 Gauge

Perforated Suspension Straps

Part No.GS-8X25-24GGS-12X25-24G

Description1/2 x 25ft x 24 Gauge 3/4 x 25ft x 24 Gauge

Galvanized Steel Strap

Plain Steel Strap Part No.PS-12X25-24G

Description3/4 x 25ft x 24 Gauge

Pipe Hook For Copper PipePart No.CPH-10CPH-14CPH-18

Pipe Hook For Steel PipePart No.SPH-DSPH-ESPH-F

Pipe Hooks

** Pipe x Length1/2 x 6 inches3/4 x 6 inches1 x 6 inches

Pipe x Length1/2 x 6 inches3/4 x 6 inches1 x 6 inches

One rod and one anchor will hang several pipe runs. You are able to use hanger rods that are supporting existing pipe. Pipe Stays can be infi nitely positioned on the rod (no premeasuring rod lengths to get proper fall). Running new lines through existing crowded ceiling spaces is aggravating so try hanging pipe off existing rods(conserve space and time).

Pipe Stay Clevis (For 3/8 Rod) Part No.PS-CLEVIS

Contents Per Pack10 Clevis & 15 Bolts

Pipe Stays and Accessories

Pipe Stay - Short (3-5 mil Black Epoxy Coating) Part No.PSS-10PSS-34

PSS-DPSS-EPSS-FPSS-GPSS-HPSS-I

Part No.PSL-10

PSL-DPSL-EPSL-F

Part No.PSD-10

PSD-D

** Pipe Size1/2 Copper2 Copper

1/2 Steel / 3/4 Copper3/4 Steel / 1 Copper

1 Steel / 1-1/4 Copper1-1/4 Steel / 1-1/2Copper

1-1/2 Steel2 Steel

** Pipe Size1/2 Copper

1/2 Steel / 3/4 Copper3/4 Steel / 1 Copper

1 Steel / 1-1/4 Copper

Pipe Stay - Long (3-5 mil Black Epoxy Coating)

** Pipe Size2 x 1/2 Copper

2 x 1/2 Steel / 3/4 Copper

Double Pipe Stay - Short (3-5 mil Black Epoxy Coating)

Page 44: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 44

Part No.TS19-44TS19-66

Zinc Plated Steel Duplex ClipTube OD

1/43/8

Clips

Copper Coated Steel Clip - 2 Hole Part No.TS14C-6TS14C-8TS14C-10TS14C-14TS14C-18

Solid Copper Clip - 2 Hole Part No.TS15-6TS15-8TS15-10TS15-14TS15-18

Tube OD3/81/25/87/8

1-1/8

Tube OD3/81/25/87/8

1-1/8

Zinc Plated Steel Clip For Steel Pipe - 2 Hole Part No.TS14-DTS14-ETS14-FTS14-GTS14-HTS14-ITS14-JTS14-KTS14-L

Pipe Size1/23/41

1-1/41-1/2

22-1/2

34

Part No.TS20-4TS20-6TS20-8TS20-12

Part No.TS20C-4TS20C-6TS20C-8TS20C-14

Tube OD1/43/81/23/4

Tube OD1/43/81/27/8

Copper Coated Steel Clip - 1 Hole

Zinc Plated Steel Clip - 1 Hole

Clips

Page 45: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 45

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Part No.DWH-10X50DWH-10X100

Part No.PVC-63X100PVC-63X300PVC-84X100PVC-84X300PVC-95X100PVC-95X300PVC-106X100PVC-106X300PVC-128X100PVC-128X300PVC-1410X100PVC-1410X300PVC-1712X100PVC-1712X300PVC-2116X100PVC-2116X200PVC-2820X100PVC-3224X100

I.D. x *Pressure x Length3/16 - 250 PSI x 100 ft.3/16 - 250 PSI x 300 ft.1/4 - 250 PSI x 100 ft.1/4 - 250 PSI x 300 ft.5/16 - 250 PSI x 100 ft.5/16 - 250 PSI x 300 ft.3/8 - 225 PSI x 100 ft.3/8 - 225 PSI x 300 ft.1/2 - 200 PSI x 100 ft.1/2 - 200 PSI x 300 ft. 5/8 - 200 PSI x 100 ft.5/8 - 200 PSI x 300 ft.3/4 - 150 PSI x 100 ft.3/4 - 150 PSI x 300 ft.1 - 125 PSI x 100 ft.1 - 125 PSI x 200 ft.

1-1/4 - 100 PSI x 100 ft.1-1/2 - 100 PSI x 100 ft.

Part No.RVH-4RVH-6RVH-8RVH-12

I.D. x *Pressure1/4 - 250 PSI3/8 - 250 PSI1/2 - 250 PSI3/4 - 175 PSI

Part No.RVH-4-BLUERVH-6-BLUERVH-8-BLUE

I.D. x *Pressure1/4 - 250 PSI3/8 - 250 PSI1/2 - 250 PSI

Dishwasher Discharge Hose - VinylClear Braided PVC Hose

Red Braided PVC Hose

Blue Braided PVC Hose

* Working Pressure at 20° C (68° F)

I.D. x *Pressure x Length5/8 x 20 PSI x 50 ft.

5/8 x 20 PSI x 100 ft.

Thermo-Plastic Hose Thermo-Plastic Hose

Clear NSF 51 Braided PVC HosePart No.PVC-84NSFX100PVC-84NSFX300PVC-106NSFX100PVC-106NSFX300PVC-128NSFX100PVC-128NSFX300PVC-1410NSFX100PVC-1410NSFX300PVC-1712NSFX100PVC-1712NSFX300PVC-2116NSFX100PVC-2116NSFX200PVC-2820NSFX100PVC-3224NSFX100

I.D. x *Pressure x Length1/4 - 250 PSI x 100 ft.1/4 - 250 PSI x 300 ft.3/8 - 225 PSI x 100 ft.3/8 - 225 PSI x 300 ft.1/2 - 200 PSI x 100 ft.1/2 - 200 PSI x 300 ft. 5/8 - 200 PSI x 100 ft.5/8 - 200 PSI x 300 ft.3/4 - 150 PSI x 100 ft.3/4 - 150 PSI x 300 ft.1 - 125 PSI x 100 ft.1 - 125 PSI x 200 ft.

1-1/4 - 100 PSI x 100 ft.1-1/2 - 100 PSI x 100 ft.

Also available in 500 ft. wooden reels.

Also available in 500 ft. wooden reels.

Part No.1366-61366-8

I.D. x *Pressure3/8 - 600 PSI1/2 - 600 PSI

Weed Spray Hose - Yellow - Ribbed

Note: Not for use with hydrocarbon based spray solutions.

Part No.PVC-84WIREPVC-106WIREPVC-128WIREPVC-1410WIREPVC-1712WIREPVC-2116WIREPVC-2820WIREPVC-3224WIRE

I.D. x *Pressure x Vacuum1/4 - 110 PSI x 28” Hg3/8 - 110 PSI x 28” Hg1/2 - 90 PSI x 28” Hg 5/8 - 90 PSI x 28” Hg3/4 - 75 PSI x 28” Hg1 - 75 PSI x 28” Hg

1-1/4 - 60 PSI x 28” Hg1-1/2 - 60 PSI x 28” Hg

Clear Vacuum Transfer PVC Hose - Wire Helix

Page 46: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 46

Part No.RH-4RH-6RH-8RH-12RH-16

I.D. x *Pressure1/4 - 150 PSI3/8 - 150 PSI1/2 - 150 PSI3/4 - 150 PSI1 - 150 PSI

Part No.BCH-6BCH-8BCH-12BCH-16

Rubber Hose

Black Rubber Hose - Single Braid

Red Rubber Hose - Single Braid

I.D. x *Pressure3/8 - 150 PSI1/2 - 150 PSI3/4 - 150 PSI1 - 150 PSI

Part No.BCH-8/2BCH-12/2BCH-16/2

Black Rubber Hose - Double Braid I.D. x *Pressure

1/2 - 300 PSI3/4 - 300 PSI1 - 200 PSI

Part No.RH-4/2RH-6/2RH-8/2RH-12/2RH-16/2

I.D. x *Pressure1/4 - 300 PSI3/8 - 300 PSI1/2 - 300 PSI3/4 - 300 PSI1 - 200 PSI

Red Rubber Hose - Double Braid

Also available in 700 ft. wooden reels.

Also available in 700 ft. wooden reels.

Also available in 700 ft. wooden reels.

Also available in 700 ft. wooden reels.

Part No.761-4761-6761-8761-10761-12

I.D. x *Pressure1/4 - 250 PSI3/8 - 250 PSI1/2 - 250 PSI5/8 - 250 PSI3/4 - 250 PSI

Push-On Hose - Black

Rubber Hose

* Working Pressure at 20° C (68° F)

Part No.761-4-BLUE761-6-BLUE761-8-BLUE761-10-BLUE761-12-BLUE

I.D. x *Pressure1/4 - 250 PSI3/8 - 250 PSI1/2 - 250 PSI5/8 - 250 PSI3/4 - 250 PSI

Push-On Hose - Blue

Also available in other colours and 250 &700 ft. wooden reels.Please contact our customer service for details and pricing.

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 47: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 47

Part No.360-4X100360-4X500360-4X1000360-5X100360-5X500360-6X100360-6X500360-6X1000360-8X100360-8X500360-10X100360-10X500360-12X100360-12X500

Part No.485-2X100485-3X100485-4X100485-6X100485-8X100

Part No.FR360-5/32X500FR360-4X250FR360-4X500FR360-4X1000FR360-6X250FR360-6X500

O.D. x I.D. x Length1/4 x .170 x 100Ft.1/4 x .170 x 500Ft.1/4 x .170 x 1000Ft.5/16 x 3/16 x 100Ft.5/16 x 3/16 x 500Ft.3/8 x 1/4 x 100Ft.3/8 x 1/4 x 500Ft.3/8 x 1/4 x 1000Ft.1/2 x 3/8 x 100Ft.1/2 x 3/8 x 500Ft.5/8 x 1/2 x 100Ft.5/8 x 1/2 x 500Ft.3/4 x 5/8 x 100Ft.3/4 x 5/8 x 500Ft.

Part No.486-2X100486-3X100486-4X100486-6X100486-8X100

Natural Food Grade Tubing

Part No.360-4BKX100360-4BKX500360-4BKX1000360-5BKX100360-5BKX500360-6BKX100360-6BKX1000360-8BKX100360-8BKX500360-10BKX100360-12BKX100

Black Non-Food Grade TubingO.D. x I.D. x Length1/4 x .170 x 100Ft.1/4 x .170 x 500Ft.1/4 x .170 x 1000Ft.5/16 x 3/16 x 100Ft.5/16 x 3/16 x 500Ft.3/8 x 1/4 x 100Ft.3/8 x 1/4 x 1000Ft.1/2 x 3/8 x 100Ft.1/2 x 3/8 x 500Ft.5/8 x 1/2 x 100Ft.3/4 x 5/8 x 100Ft.

Natural Flexible Nylon Tubing - 100 Ft. Coils

Natural Semi-Rigid Nylon Tubing - 100 Ft. Coils

O.D. x I.D.1/8 x .0963/16 x .1381/4 x .1903/8 x .2951/2 x 3/8

O.D. x I.D. x Length5/32 x .096 x 500Ft.1/4 x .170 x 250Ft.1/4 x .170 x 500Ft

1/4 x .170 x 1000Ft.3/8 x 1/4 x 250Ft.3/8 x 1/4 x 500Ft.

Black Fire Retardent Tubing

Nylon Tube

O.D. x I.D.1/8 x .0963/16 x .1381/4 x .1903/8 x .2951/2 x 3/8

Part No.485-4BK-UVX100485-6BK-UVX100485-8BK-UVX100

O.D. x I.D.1/4 x .1903/8 x .2951/2 x 3/8

Black U.V. Resistant Flexible Nylon Tubing - 100 Ft. Coils

Other colours available upon request. Minimums may apply.

Polyethylene Tube

Part No. FR360-5/32WELDFR360-4WELD

O.D. x I.D. x Length 5/32 x .096 x 500Ft.1/4 x .170 x 250Ft.

Black Fire Retardent Tubing - 2 Tubes Welded TogetherPrice / Foot

Page 48: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 48

Blue Polyurethane Self-Storing Ass’y - MPT Swivel EndsPart No.1936-4X101936-4X151936-4X201936-4X251936-4X301936-4X501936-6X101936-6X151936-6X201936-6X251936-6X301936-6X501936-8X251936-8X50

I.D. x Length x Ends1/4 x 10Ft. x 1/41/4 x 15Ft. x 1/41/4 x 20Ft. x 1/41/4 x 25Ft. x 1/41/4 x 30Ft. x 1/41/4 x 50Ft. x 1/43/8 x 10Ft. x 3/83/8 x 15Ft. x 3/83/8 x 20Ft. x 3/83/8 x 25Ft. x 3/83/8 x 30Ft. x 3/83/8 x 50Ft. x 3/81/2 x 25Ft. x 1/21/2 x 50Ft. x 1/2

I.D. x Length x Ends1/4 x 12-1/2Ft. x 1/4

1/4 x 25Ft. x 1/41/4 x 50Ft. x 1/41/4 x 100Ft. x 1/4

Red Nylon Self-Storing Ass’y - MPT Swivel Ends

Self-Storing Air Hose (Bulk)

Part No.1935-4X121/21935-4X251935-4X501935-4X100

Red Nylon Self-Storing Hose - No EndsPart No.1985-4X121/21985-4X251985-4X501985-4X1001985-6X251985-6X501985-6X1001985-8X251985-8X501985-8X100

Self-Storing Air Hose Assemblies

I.D. x Length1/4 x 12-1/2Ft.

1/4 x 25Ft.1/4 x 50Ft.1/4 x 100Ft.3/8 x 25Ft.3/8 x 50Ft.3/8 x 100Ft.1/2 x 25Ft.1/2 x 50Ft.1/2 x 100Ft.

Part No.JFT-42X100JFT-53X100JFT-64X100JFT-75X100JFT-86X100JFT-106X100JFT-108X100JFT-1310X100JFT-1410X100JFT-1612X100

O.D. x I.D.1/4 x 1/8

5/16 x 3/163/8 x 1/4

7/16 x 5/161/2 x 3/85/8 x 3/85/8 x 1/2

13/16 x 5/87/8 x 5/81 x 3/4

Clear Food Grade PVC Tubing - 100 Ft. Coils

Clear PVC Tube

Silicone Tube

Part No.SLT-42X100SLT-53X100SLT-64X100SLT-75X100SLT-86X100SLT-106X100SLT-128X100

O.D. x I.D.1/4 x 1/8

5/16 x 3/163/8 x 1/4

7/16 x 5/161/2 x 3/85/8 x 3/83/4 x 1/2

Natural Food Grade Silicone Tubing - 100 Ft. Coils

Part No.PUTES-42X100PUTES-64X100PUTES-86X100PUTES-128X100

O.D. x I.D.1/4 x 1/83/8 x 1/41/2 x 3/83/4 x 1/2

Natural Ester Polyurethane Tubing - 100 Foot Coils

Polyurethane Tube

Page 49: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 49

Contractor’s Water Hose Assemblies

I.D. x Length x Ends1/2 x 25Ft. x 3/4 GHT1/2 x 50Ft. x 3/4 GHT1/2 x 100Ft. x 3/4 GHT

Blue PVC (Feels Like Rubber) - Male x Female GHTPart No.CWH8BLU-25CWH8BLU-50CWH8BLU-100

I.D. x Length x Ends1/2 x 25Ft. x 3/4 GHT1/2 x 50Ft. x 3/4 GHT1/2 x 100Ft. x 3/4 GHT5/8 x 25Ft. x 3/4 GHT5/8 x 50Ft. x 3/4 GHT5/8 x 100Ft. x 3/4 GHT3//4 x 25Ft. x 3/4 GHT3/4 x 50Ft. x 3/4 GHT3/4 x 100Ft. x 3/4 GHT

1 x 50Ft. x 3/4 GHT

Black Rubber (EPDM) - Male x Female GHTPart No.CWH8BLK-25CWH8BLK-50CWH8BLK-100CWH10BLK-25CWH10BLK-50CWH10BLK-100CWH12BLK-25CWH12BLK-50CWH12BLK-100CWH16BLK-50

Non-Marking Nextrile PVC - 300 PSI WP @ 21°C

Abrasion Resistant EPDM - 100 PSI WP @ 21°C

I.D. x Length x Ends5/8 x 25Ft. x 3/4 GHT5/8 x 50Ft. x 3/4 GHT5/8 x 100Ft. x 3/4 GHT

White PVC - Male x Female GHTPart No.CWH10WHT-25CWH10WHT-50CWH10WHT-100

Non-Marking PVC - 120 PSI WP @ 21°C

Air Hose Assemblies

I.D. x Length x Ends1/4 x 25Ft. x 1/41/4 x 50Ft. x 1/41/4 x 100Ft. x 1/43/8 x 25Ft. x 1/43/8 x 50Ft. x 1/43/8 x 100Ft. x 1/4

Polyurethane - Male Pipe x Male PipePart No.PUA4BL-25BPUA4BL-50BPUA4BL-100BPUA6BL-25BPUA6BL-50BPUA6BL-100B

210 PSI WP @ 21°C

Blue PVC - Male Pipe x Male PipePart No.RVH4BL-25BRVH4BL-50BRVH4BL-100BRVH6BL-25BRVH6BL-50BRVH6BL-100B

I.D. x Length x Ends1/4 x 25Ft. x 1/41/4 x 50Ft. x 1/41/4 x 100Ft. x 1/43/8 x 25Ft. x 1/43/8 x 50Ft. x 1/43/8 x 100Ft. x 1/4

Red PVC - Male Pipe x Male PipePart No.RVH4-25BRVH4-50BRVH4-100BRVH6-25BRVH6-50BRVH6-100B

300 PSI WP @ 21°C

I.D. x Length x Ends1/4 x 25Ft. x 1/41/4 x 50Ft. x 1/41/4 x 100Ft. x 1/43/8 x 25Ft. x 1/43/8 x 50Ft. x 1/43/8 x 100Ft. x 1/4

I.D. x Length x Ends1/4 x 25Ft. x 1/41/4 x 50Ft. x 1/43/8 x 25Ft. x 1/43/8 x 50Ft. x 1/43/8 x 100Ft. x 1/4

Red Rubber (EPDM) - Male Pipe x Male Pipe

200 PSI WP @ 21°C

Part No.RH4-25BRH4-50BRH6-25BRH6-50BRH6-100B

Garden Hose Nozzle - Adjustable Pistol Grip Description

3/4 GH ThreadPart No.GH NOZZLE

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 50: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 50

Part No.1161-41161-61161-81161-101161-12

Tube Size1/43/81/25/83/4

Nut

Air Shift Transmission Fittings

Part No.860-2860-5/32

Sleeve

Nut Part No.861-2861-5/32

Tube Size1/85/32

Union - Tube Both EndsPart No.862-2862-5/32

Tube Size1/85/32

Male ConnectorPart No.868-2A868-5/32A

Tube x MPT1/8 x 1/85/32 x 1/8

Part No.869-2A869-5/32A

Tube x MPT1/8 x 1/85/32 x 1/8

Male Elbow ( 90 Deg. )

Tube Size1/85/32

Female ConnectorPart No.1166-6B1166-6C

Tube x FPT3/8 x 1/43/8 x 3/8

Part No.1162-41162-61162-81162-101162-12

Tube Size1/43/81/25/83/4

Union Tee - Tube All EndsPart No.1164-41164-61164-81164-10

Tube Size1/43/81/25/8

Union - Tube Both Ends

SleevePart No.1160-41160-61160-81160-101160-12

Tube Size1/43/81/25/83/4

D.O.T. Air Brake Fittings For Copper Tube** Not For Use On Nylon Tubing **

Male ConnectorPart No.1168-4A1168-4B1168-4C1168-6A1168-6B

Tube x MPT1/4 x 1/81/4 x 1/41/4 x 3/83/8 x 1/83/8 x 1/4

D.O.T. Air Brake Fittings For Copper Tube** Not For Use On Nylon Tubing **

Page 51: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 51

Union - Tube Both EndsPart No.1462-41462-61462-81462-101462-12

Tube Size1/43/81/25/83/4

Part No.1460-41460-61460-81460-101460-12

Sleeve

Part No.1461-41461-61461-81461-101461-12

NutTube Size

1/43/81/25/83/4

Tube Size1/43/81/25/83/4

Male Connector (Continued)Part No.1168-6C1168-6D1168-8B1168-8C1168-8D1168-10C1168-10D1168-12E

Tube x MPT3/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/23/4 x 3/4

Part No.1169-4A1169-4B1169-6A1169-6B1169-6C1169-6D1169-8B1169-8C1169-8D1169-10C1169-10D1169-12E

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/23/4 x 3/4

Male Elbow - 90 Deg.

Male Run TeePart No.1171-4A1171-4B1171-6B1171-6C1171-8C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/8

Male Branch TeePart No.1172-4A1172-4B1172-6B1172-6C1172-8C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/8

Male Elbow - 45 Deg.Tube x MPT

1/4 x 1/83/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/2

Part No.1174-4A1174-6B1174-6C1174-8C1174-8D 1174-10D

D.O.T. Air Brake Fittings For NylonTube

D.O.T. Air Brake Fittings For Copper Tube** Not For Use On Nylon Tubing **

D.O.T. Air Brake Fittings For Copper Tube** Not For Use On Nylon Tubing **

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 52: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 52

D.O.T. Air Brake Fittings For NylonTube

Part No.1464-41464-61464-81464-10

Tube Size1/43/81/25/8

Union Tee - Tube All Ends

Female ConnectorPart No.1466-6B1466-6C

Male Connector

Tube x FPT3/8 x 1/43/8 x 3/8

Part No.1468-4A1468-4B1468-4C1468-6A1468-6B1468-6C1468-6D1468-8B1468-8C1468-8D1468-10C1468-10D1468-12D1468-12E

Tube x MPT1/4 x 1/81/4 x 1/41/4 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/25/8 x 3/85/8 x 1/23/4 x 1/23/4 x 3/4

Part No.1469-10C1469-10D1469-12D1469-12E

Tube x MPT5/8 x 3/85/8 x 1/23/4 x 1/23/4 x 3/4

Male Elbow - 90 Deg. (Continued)

Part No.1471-4A1471-4B1471-6B1471-6C1471-8C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/8

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/81/2 x 3/8

Part No.1472-4A1472-4B1472-6B1472-6C1472-8C

Male Run Tee

Male Branch Tee

D.O.T. Air Brake Fittings For NylonTube

Tube x MPT1/4 x 1/83/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/25/8 x 1/2

Part No.1474-4A1474-6B1474-6C1474-8C1474-8D1474-10D

Male Elbow - 45 Deg.

Part No.1469-4A1469-4B1469-6A1469-6B1469-6C1469-6D1469-8B1469-8C1469-8D

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Male Elbow - 90 Deg.

Nylon Air Brake Tube Inserts - Size By Tube ODPart No.1481-41481-61481-81481-101481-12

Tube OD1/43/81/25/83/4

Page 53: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 53

Female Straight Thread Connector - Body Part No.B1500-6B1500-8

Hose x FST3/8 x 3/4-201/2 x 7/8-20

Part No.1500-61500-8

Hose x FST3/8 x 3/4-201/2 x 7/8-20

Female Straight Thread Connector - Assembled

Male Connector - Body Part No.B1492-6BB1492-6CB1492-6DB1492-8CB1492-8D

Hose x MPT3/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Splicer - Body Part No.B1492-6SB1492-8S

Hose Size3/81/2

Male Connector Assembled Part No.1492-6B1492-6C1492-6D1492-8C1492-8D

Hose x MPT3/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Splicer Assembled Part No.1492-6S1492-8S

Hose Size3/81/2

Male Connector Assembled C/W Spring GuardPart No.1493-6B1493-6C1493-6D1493-8C1493-8D

Hose x MPT3/8 x 1/43/8 x 3/83/8 x 1/21/2 x 3/81/2 x 1/2

Spring Nut Hose Size

3/81/2

Part No.1494N-61494N-8

Part No.1494S-61494S-8

Hose Size3/81/2

Spring

Splicer Assembled C/W Spring Guards Part No.1493-6S1493-8S

Hose Size3/81/2

D.O.T. Reusable Air Brake Hose Fittings

Sleeve Part No.1490-61490-8

Tube Size3/81/2

Nut Part No.1491-61491-8

Tube Size3/81/2

D.O.T. Reusable Air Brake Hose Fittings

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 54: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 54

D.O.T. Reusable Air Brake Hose Fittings

Part No.1501-6B1501-6C1501-8C1501-8D

Male Adaptor - Straight Male Thread x Male PipeMST x MPT3/4-20 x 1/43/4-20 x 3/87/8-20 x 3/87/8-20 x 1/2

Female Swivel Connector C/W Male AdaptorPart No.1502-6B1502-6C1502-8C1502-8D

Hose x MPT3/8 x 1/43/8 x 3/81/2 x 3/81/2 x 1/2

Bulkhead Adaptors (Terminal Bolts)

Bulkhead Adaptors (Terminal Bolts)

Steel Bulkhead - FPT x FPTPart No.1495-L1495-S1495-C

Pipe Size x Length1/4 x 1-1/2”1/4 x 31/32”3/8 x 1-3/8”

Brass Bulkhead - FPT x FPTPart No.1495-AB1495-LB1495-SB1495-CB1495-DB

Pipe Size x Length1/8 x 1-1/2”1/4 x 1-1/2”1/4 x 31/32”3/8 x 1-5/16”1/2 x 1-1/2”

Steel Bulkhead - MPT x FPTPart No.1496-DB1496-DC

MPT x FPT1/2 x 1/41/2 x 3/8

Part No.1497-DB

MPT x MPT x FPT1/2 x 1/2 x 1/4

Steel Bulkhead - MPT x MPT x FPT

Brass Bulkhead - Tube x FPTPart No.1489N-6C1489N-8C

Nylon Tube x FPT3/8 x 3/81/2 x 3/8

D.O.T. Push To Connect Fittings

Union - Tube Both EndsPart No.APTC62-4APTC62-6APTC62-8

Tube Size1/43/81/2

Union Tee - Tube All EndsPart No.APTC64-4APTC64-6APTC64-8

Tube Size1/43/81/2

Female ConnectorPart No.APTC66-4AAPTC66-4BAPTC66-6BAPTC66-6C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/8

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 55: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 55

Male Swivel Branch TeePart No.APTC72S-4AAPTC72S-4BAPTC72S-6BAPTC72S-6C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/8

Male Branch TeeTube x MPT

1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/8

Part No.APTC72-4AAPTC72-4BAPTC72-6BAPTC72-6C

Part No.7898790079017933

Towed Trailer Brake Tees

Part No.APTC69S-4AAPTC69S-4BAPTC69S-6BAPTC69S-6CAPTC69S-6DAPTC69S-8BAPTC69S-8CAPTC69S-8D

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Male Swivel Elbow - 90 Deg.

Male Swivel Run TeePart No.APTC71S-4AAPTC71S-4BAPTC71S-6BAPTC71S-6C

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/43/8 x 3/8

Part No.APTC71-4AAPTC71-6B

Tube x MPT1/4 x 1/83/8 x 1/4

Male Run Tee

Male Elbow - 90 Deg.Part No.APTC69-4AAPTC69-4BAPTC69-6AAPTC69-6BAPTC69-6CAPTC69-6DAPTC69-8BAPTC69-8CAPTC69-8D

Tube x MPT1/4 x 1/81/4 x 1/43/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

D.O.T. Push To Connect Fittings

Tube x MPT1/4 x 1/81/4 x 1/41/4 x 3/83/8 x 1/83/8 x 1/43/8 x 3/83/8 x 1/21/2 x 1/41/2 x 3/81/2 x 1/2

Part No.APTC68-4AAPTC68-4BAPTC68-4CAPTC68-6AAPTC68-6BAPTC68-6CAPTC68-6DAPTC68-8BAPTC68-8CAPTC68-8D

Male Connector

D.O.T. Push To Connect Fittings

Brass Hydraulic Brake Fittings

Inv Fem- Inv Male- Inv Fem1/4 x 1/4 x 1/4

3/16 x 3/16 x 3/161/4 x 1/4 x 3/16

9/16-18 x 9/16-18 x 3/8-24

Page 56: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 56

Dual Master Cylinder Adaptors

Part No. * 772778187828782979087909791079117912791379157916* Seals On Hex Face

Brass Hydraulic Brake Fittings

Inv Female x Inv Male (Exceptions Noted)

1/4 x 5/163/16 x 1/41/4 x 3/161/4 x 5/16

1/4 x 9/16-183/16 x 5/16

3/16 x 9/16-203/16 x 9/16-189/16-18 x 5/16

1/2-20 x 9/16-183/8 x 5/165/16 x 3/8

D.O.T. Nylon Air Brake Tubing

Black Tubing Part No.1485-21485-2X1001485-2X10001485-41485-4X1001485-4X10001485-51485-5X1001485-5X5001485-61485-6X1001485-6X5001485-81485-8X1001485-8X5001485-101485-10X501485-10X2501485-121485-12X501485-12X250

Description1/8O.D. x CUT

1/8O.D. x 100FT.1/8O.D. x 1000FT.

1/4O.D. x CUT1/4O.D. x 100FT.1/4O.D. x 1000FT.5/16O.D. x CUT

5/16O.D. x 100FT.5/16O.D. x 500FT.

3/8O.D. x CUT3/8O.D. x 100FT.3/8O.D. x 500FT.1/2O.D. x CUT

1/2O.D. x 100FT.1/2O.D. x 500FT.5/8O.D. x CUT5/8O.D. x 50FT.5/8O.D. x 250FT.3/4O.D. x CUT3/4O.D. x 50FT.3/4O.D. x 250FT.

D.O.T. Bulk Rubber Air Brake Hose

Bulk Air Brake Hose (x 250 Ft. On Reels)Part No.HAB-6HAB-6X250HAB-8HAB-8X250

Description3/8 I.D.

3/8 I.D. x 250 Ft.1/2 I.D.

1/2 I.D. x 250 Ft.

D.O.T. Rubber Air Brake Assembly

Part No.HAB-6-14BHAB-6-16BHAB-6-18BHAB-6-20BHAB-6-22BHAB-6-24BHAB-6-26BHAB-6-28BHAB-6-30BHAB-6-32BHAB-6-34BHAB-6-36BHAB-6-38BHAB-6-40BHAB-6-42BHAB-6-44BHAB-6-46BHAB-6-48BHAB-6-50BHAB-6-52BHAB-6-54BHAB-6-56BHAB-6-58BHAB-6-60BHAB-6-62BHAB-6-64BHAB-6-66BHAB-6-68BHAB-6-70BHAB-6-72BHAB-6-74BHAB-6-76BHAB-6-80BHAB-6-84BHAB-6-96B

Length (Inches)1416182022242628303234363840424446485052545658606264666870727476808496

3/8 I.D. Hose C/W 1/4 MPT Swivel x 1/4 MPT Fixed

Page 57: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 57

D.O.T. Rubber Air Brake Assembly

Part No.HAB-6-14B-SWHAB-6-16B-SWHAB-6-18B-SWHAB-6-20B-SWHAB-6-22B-SWHAB-6-24B-SWHAB-6-26B-SWHAB-6-28B-SWHAB-6-30B-SWHAB-6-32B-SWHAB-6-34B-SWHAB-6-36B-SWHAB-6-38B-SWHAB-6-40B-SWHAB-6-42B-SWHAB-6-44B-SWHAB-6-46B-SWHAB-6-48B-SWHAB-6-50B-SWHAB-6-52B-SWHAB-6-54B-SWHAB-6-56B-SWHAB-6-58B-SWHAB-6-60B-SWHAB-6-62B-SWHAB-6-64B-SWHAB-6-66B-SWHAB-6-68B-SWHAB-6-70B-SWHAB-6-72B-SWHAB-6-74B-SWHAB-6-76B-SWHAB-6-80B-SWHAB-6-84B-SWHAB-6-96B-SW

Length (Inches)1416182022242628303234363840424446485052545658606264666870727476808496

3/8 I.D. Hose C/W 1/4 MPT Swivel x 1/4 MPT Swivel

D.O.T. Rubber Air Brake Assembly

3/8 I.D. Hose C/W 3/8 MPT Swivel x 3/8 MPT FixedPart No.HAB-6-14CHAB-6-16CHAB-6-18CHAB-6-20CHAB-6-22CHAB-6-24CHAB-6-26CHAB-6-28CHAB-6-30CHAB-6-32CHAB-6-34CHAB-6-36CHAB-6-38CHAB-6-40CHAB-6-42CHAB-6-44CHAB-6-46CHAB-6-48CHAB-6-50CHAB-6-52CHAB-6-54CHAB-6-56CHAB-6-58CHAB-6-60CHAB-6-62CHAB-6-64CHAB-6-66CHAB-6-68CHAB-6-70CHAB-6-72CHAB-6-74CHAB-6-76CHAB-6-80CHAB-6-84CHAB-6-96C

Length (Inches)1416182022242628303234363840424446485052545658606264666870727476808496

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 58: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 58

D.O.T. Rubber Air Brake AssemblyD.O.T. Rubber Air Brake Assembly

3/8 I.D. Hose C/W 3/8 MPT Swivel x 3/8 MPT SwivelPart No.HAB-6-14C-SWHAB-6-16C-SWHAB-6-18C-SWHAB-6-20C-SWHAB-6-22C-SWHAB-6-24C-SWHAB-6-26C-SWHAB-6-28C-SWHAB-6-30C-SWHAB-6-32C-SWHAB-6-34C-SWHAB-6-36C-SWHAB-6-38C-SWHAB-6-40C-SWHAB-6-42C-SWHAB-6-44C-SWHAB-6-46C-SWHAB-6-48C-SWHAB-6-50C-SWHAB-6-52C-SWHAB-6-54C-SWHAB-6-56C-SWHAB-6-58C-SWHAB-6-60C-SWHAB-6-62C-SWHAB-6-64C-SWHAB-6-66C-SWHAB-6-68C-SWHAB-6-70C-SWHAB-6-72C-SWHAB-6-74C-SWHAB-6-76C-SWHAB-6-80C-SWHAB-6-84C-SWHAB-6-96C-SW

Length (Inches)1416182022242628303234363840424446485052545658606264666870727476808496

1/2 I.D. Hose C/W 1/2 Female Flare Swivel On Both EndsPart No.HAB-8-14FSHAB-8-16FSHAB-8-18FSHAB-8-20FSHAB-8-22FSHAB-8-24FSHAB-8-26FSHAB-8-28FSHAB-8-30FSHAB-8-32FSHAB-8-34FSHAB-8-36FSHAB-8-38FSHAB-8-40FSHAB-8-42FSHAB-8-44FSHAB-8-46FSHAB-8-48FSHAB-8-50FSHAB-8-52FSHAB-8-54FSHAB-8-56FSHAB-8-58FSHAB-8-60FSHAB-8-62FSHAB-8-64FSHAB-8-66FSHAB-8-68FSHAB-8-70FSHAB-8-72FSHAB-8-74FSHAB-8-76FSHAB-8-80FSHAB-8-84FSHAB-8-96FS

Length (Inches)1416182022242628303234363840424446485052545658606264666870727476808496

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 59: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 59

D.O.T. Rubber Air Brake Assembly

Part No.HAB-8-14C-SWHAB-8-16C-SWHAB-8-18C-SWHAB-8-20C-SWHAB-8-22C-SWHAB-8-24C-SWHAB-8-26C-SWHAB-8-28C-SWHAB-8-30C-SWHAB-8-32C-SWHAB-8-34C-SWHAB-8-36C-SWHAB-8-38C-SWHAB-8-40C-SWHAB-8-42C-SWHAB-8-44C-SWHAB-8-46C-SWHAB-8-48C-SWHAB-8-50C-SWHAB-8-52C-SWHAB-8-54C-SWHAB-8-56C-SWHAB-8-58C-SWHAB-8-60C-SWHAB-8-62C-SWHAB-8-64C-SWHAB-8-66C-SWHAB-8-68C-SWHAB-8-70C-SWHAB-8-72C-SWHAB-8-74C-SWHAB-8-76C-SWHAB-8-80C-SWHAB-8-84C-SWHAB-8-96C-SW

1/2 I.D. Hose C/W 3/8 MPT Swivel x 3/8 MPT SwivelLength (Inches)

1416182022242628303234363840424446485052545658606264666870727476808496

D.O.T. Rubber Air Brake Assembly

1/2 I.D. Hose C/W 3/8 MPT Swivel x 3/8 MPT FixedPart No.HAB-8-14CHAB-8-16CHAB-8-18CHAB-8-20CHAB-8-22CHAB-8-24CHAB-8-26CHAB-8-28CHAB-8-30CHAB-8-32CHAB-8-34CHAB-8-36CHAB-8-38CHAB-8-40CHAB-8-42CHAB-8-44CHAB-8-46CHAB-8-48CHAB-8-50CHAB-8-52CHAB-8-54CHAB-8-56CHAB-8-58CHAB-8-60CHAB-8-62CHAB-8-64CHAB-8-66CHAB-8-68CHAB-8-70CHAB-8-72CHAB-8-74CHAB-8-76CHAB-8-80CHAB-8-84CHAB-8-96C

Length (Inches)1416182022242628303234363840424446485052545658606264666870727476808496

Page 60: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 60

Rubber Heater HosePart No.HH-8HH-10HH-12

Size ( I.D. )1/25/83/4

Fuel Line & Vapour Emission HosePart No.FLH-3FLH-4FLH-5FLH-6

Size ( I.D. )3/161/45/163/8

Silicone Heater Hose Part No.SHH-10SHH-12SHH-16

Size ( I.D. )5/83/41

Silicone Coolant Hose Part No.SCH-20SCH-24SCH-32

Size ( I.D. )1-1/41-1/2

2

Grease Whip Assemblies - 3/16 x 1/8 MPT Both EndsLength (Inches)

812182436

Part No.GWH-8GWH-12GWH-18GWH-24GWH-36

Hose - Miscellaneous

Grease Whip Assemblies - SAE100R1 Hose

Part No. SLPB-6X100SLPB-8X100SLPB-10X100

Convoluted Split Loom - Black Polyethylene

Split Loom

Size ( I.D. )3/81/25/8

Gladhand Couplings

Gladhand - EmergencyPart No.GHE-S

Size x Colour1/2 FPT x Red

Gladhand - ServicePart No.GHS-S

Size x Colour1/2 FPT x Blue

Air Brake Fittings Repair Kit

Air Brake “QWIK FIX” KitPart No.KIT-AB-1

DescriptionAssorted Air Brake

Repair Parts

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 61: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 61

Refrigeration Copper Tube

Type G/Gas Copper Tube - Third Party Certifi edDescription

3/8 OD x 50 FT.3/8 OD x 100 FT.1/2 OD x 50 FT.1/2 OD x 100 FT.5/8 OD x 50 FT.5/8 OD x 100 FT.3/4 OD x 50 FT.

Type G/Gas Copper Tube c/w Yellow Polyethylene Coating Third Party Certifi ed

Description3/8 OD x 60 FT.3/8 OD x 100 FT.3/8 OD x 250 FT.1/2 OD x 60 FT.1/2 OD x 100 FT.1/2 OD x 250 FT.5/8 OD x 60 FT.5/8 OD x 100 FT.5/8 OD x 250 FT.3/4 OD x 60 FT.3/4 OD x 100 FT.Description

1/4 OD x 50 FT.3/8 OD x 50 FT.1/2 OD x 50 FT.5/8 OD x 50 FT.3/4 OD x 50 FT.7/8 OD x 50 FT. Orange Polyethylene Coated Oil Copper Tubing

Description3/8 OD x 50 FT.3/8 OD x 100 FT.1/2 OD x 50 FT.1/2 OD x 100 FT.

Some sizes are available in different lengths, please check with our customer service for details.

Prices on request due to the fl uctuating metal price.

Part No.CT-4X50CT-6X50CT-8X50CT-10X50CT-12X50CT-14X50

Part No.CTG-6X50CTG-6X100CTG-8X50CTG-8X100CTG-10X50CTG-10X100CTG-12X50

Part No.CTLG-6X60CTLG-6X100CTLG-6X250CTLG-8X60CTLG-8X100CTLG-8X250CTLG-10X60CTLG-10X100CTLG-10X250CTLG-12X60CTGL-12X100

Part No.OPCT-6X50OPCT-6X100OPCT-8X50OPCT-8X100

Part No.CT-4X25CT-6X25CT-8X25CT-10X25CT-12X25

General Purpose Copper TubeDescription

1/4 OD x 25FT.3/8 OD x 25FT.1/2 OD x 25FT.5/8 OD x 25FT.3/4 OD x 25FT.

.

Type K Copper Tube - Third Party Certifi edPart No.CTK-6X100CT-8.049X60CT-8.049X100CT-10.049X100CT-12.049X66CT-14.065X66

Type L Straight Length Copper Pipe - 12 Feet LongPart No.CTL-10X12CTL-14X12CTL-18X12CTL-22X12CTL-26X12CTL-34X12CTL-42X12CTL-50X12

Copper Pipe Size1/2 Nom.(5/8 OD)3/4 Nom.(7/8 OD)1 Nom.(1-1/8 OD)

1-1/4 Nom.(1-3/8 OD)1-1/2 Nom.(1-5/8 OD)

2 Nom.(2-1/8 OD)2-1/2 Nom.(2-5/8 OD)

3 Nom.(3-1/8 OD)

Copper Pipe

Part No.CTM-10X12CTM-14X12CTM-18X12CTM-22X12CTM-26X12CTM-34X12CTM-42X12CTM-50X12

Copper Pipe Size1/2 Nom.(5/8 OD)3/4 Nom.(7/8 OD)1 Nom.(1-1/8 OD)

1-1/4 Nom.(1-3/8 OD)1-1/2 Nom.(1-5/8 OD)

2 Nom.(2-1/8 OD)2-1/2 Nom.(2-5/8 OD)

3 Nom.(3-1/8 OD)

Type M Straight Length Copper Pipe - 12 Feet Long

Copper Pipe Size1/4 K (3/8 OD) x 100 FT.3/8 K (1/2 OD) x 60 FT.3/8 K (1/2 OD) x 100 FT.1/2 K (5/8 OD) x 100 FT.5/8 K (3/4 OD) x 66 FT.3/4 K (7/8 OD) x 66 FT.

Copper Tube Copper Tube

Page 62: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 62

Coupling With Stop - C x C

Wrot Copper Fittings

Part No.SWT62-4SWT62-6SWT62-8SWT62-10SWT62-12SWT62-14SWT62-18SWT62-22SWT62-26SWT62-34SWT62-42SWT62-50SWT62-66

Copper Pipe Size1/81/43/81/25/83/41

1-1/41-1/2

22-1/2

34

Reducing Coupling With Stop - C x CPart No.SWT62-6-4SWT62-8-6SWT62-10-6SWT62-10-8SWT62-14-6SWT62-14-8SWT62-14-10SWT62-18-10SWT62-18-14SWT62-22-10SWT62-22-14SWT62-22-18SWT62-26-10SWT62-26-14SWT62-26-18SWT62-26-22SWT62-34-10SWT62-34-14SWT62-34-18SWT62-34-22SWT62-34-26SWT62-42-26SWT62-42-34SWT62-50-34SWT62-50-42

Part No.SWT64-10-6SWT64-10-8SWT64-10-8-10SWT64-10-8-8SWT64-10-14SWT64-14-10SWT64-14-10-14SWT64-14-10-10SWT64-14-18SWT64-18-10SWT64-18-10-18SWT64-18-10-10SWT64-18-10-14SWT64-18-14SWT64-18-14-10SWT64-18-14-18SWT64-18-14-14SWT64-18-22SWT64-18-26SWT64-22-10SWT64-22-10-22SWT64-22-14SWT64-22-14-22SWT64-22-14-14SWT64-22-18SWT64-22-18-22SWT64-22-18-18SWT64-22-26

Part No.SWT64-4SWT64-6SWT64-8SWT64-10SWT64-12SWT64-14SWT64-18SWT64-22SWT64-26SWT64-34SWT64-42SWT64-50

Copper Pipe Size1/4 x 1/83/8 x 1/41/2 x 1/41/2 x 3/83/4 x 1/43/4 x 3/83/4 x 1/21 x 1/21 x 3/4

1-1/4 x 1/21-1/4 x 3/41-1/4 x 1

1-1/2 x 1/21-1/2 x 3/41-1/2 x 1

1-1/2 x 1-1/42 x 1/22 x 3/42 x 1

2 x 1-1/42 x 1-1/2

2-1/2 x 1-1/22-1/2 x 2

3 x 23 x 2-1/2

Copper Pipe Size1/2 x 1/2 x 1/41/2 x 1/2 x 3/81/2 x 3/8 x 1/21/2 x 3/8 x 3/81/2 x 1/2 x 3/43/4 x 3/4 x 1/23/4 x 1/2 x 3/43/4 x 1/2 x 1/23/4 x 3/4 x 11 x 1 x 1/21 x 1/2 x 1

1 x 1/2 x 1/21 x 1/2 x 3/41 x 1 x 3/4

1 x 3/4 x 1/21 x 3/4 x 1

1 x 3/4 x 3/41 x 1 x 1-1/41 x 1 x 1-1/2

1-1/4 x 1-1/4 x 1/21-1/4 x 1/2 x 1-1/41-1/4 x 1-1/4 x 3/41-1/4 x 3/4 x 1-1/41-1/4 x 3/4 x 3/41-1/4 x 1-1/4 x 11-1/4 x 1 x 1-1/4

1-1/4 x 1 x 11-1/4 x 1-1/4 x1-1/2

Reducing Tee - C x C x C

Copper Pipe Size1/81/43/81/25/83/41

1-1/41-1/2

22-1/2

3

Tee - C x C x C

12

3

12

3

Wrot Copper Fittings

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 63: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 63

Wrot Copper Fittings

Part No.SWT64-26-10SWT64-26-10-26SWT64-26-14SWT64-26-14-26SWT64-26-14-14SWT64-26-18SWT64-26-18-26SWT64-26-18-18SWT64-26-22SWT64-26-22-26SWT64-26-22-22SWT64-26-34SWT64-34-10SWT64-34-10-34SWT64-34-14SWT64-34-14-34SWT64-34-18SWT64-34-18-34SWT64-34-18-18SWT64-34-22SWT64-34-22-34SWT64-34-22-22SWT64-34-26SWT64-34-26-34SWT64-34-26-26SWT64-42-22SWT64-42-26SWT64-42-34SWT64-50-22SWT64-50-26SWT64-50-34SWT64-66-22

Copper Pipe Size1-1/2 x 1-1/2 x 1/21-1/2 x 1/2 x 1-1/21-1/2 x 1-1/2 x 3/41-1/2 x 3/4 x 1-1/21-1/2 x 3/4 x 3/41-1/2 x 1-1/2 x 11-1/2 x 1 x 1-1/2

1-1/2 x 1 x 11-1/2 x 1-1/2 x 1-1/41-1/2 x 1-1/4 x 1-1/21-1/2 x 1-1/4 x 1-1/4

1-1/2 x 1-1/2 x 22 x 2 x 1/22 x 1/2 x 22 x 2 x 3/42 x 3/4 x 22 x 2 x 12 x 1 x 22 x 1 x 1

2 x 2 x 1-1/42 x 1-1/4 x 2

2 x 1-1/4 x 1-1/42 x 2 x 1-1/22 x 1-1/2 x 2

2 x 1-1/2 x 1-1/22-1/2 x 2-1/2 x 1-1/42-1/2 x 2-1/2 x 1-1/2

2-1/2 x 2-1/2 x 23 x 3 x 1-1/43 x 3 x 1-1/2

3 x 3 x 24 x 4 x 1-1/4

Reducing Tee - C x C x C (Continued)

Wrot Copper Fittings

Part No.SWT65-6SWT65-8SWT65-10SWT65-12SWT65-14SWT65-18SWT65-22SWT65-26SWT65-34SWT65-42SWT65-50SWT65-66

Copper Pipe Size1/43/81/25/83/41

1-1/41-1/2

22-1/2

34

Part No.SWT65-10-LRSWT65-12-LRSWT65-14-LRSWT65-18-LRSWT65-22-LRSWT65-26-LRSWT65-34-LR

Copper Pipe Size1/25/83/41

1-1/41-1/2

2

Part No.SWT66-8CSWT66-10CSWT66-10DSWT66-10ESWT66-14DSWT66-14ESWT66-18DSWT66-18ESWT66-18FSWT66-22GSWT66-26HSWT66-34ISWT66-42JSWT66-50K

Copper x Female Pipe3/8 x 3/81/2 x 3/81/2 x 1/21/2 x 3/43/4 x 1/23/4 x 3/41 x 1/21 x 3/41 x 1

1-1/4 x 1-1/41-1/2 x 1-1/2

2 x 22-1/2 x 2-1/2

3 x 3

Part No.SWT68-8CSWT68-10CSWT68-10DSWT68-10ESWT68-14DSWT68-14ESWT68-18DSWT68-18ESWT68-18FSWT68-22GSWT68-26HSWT68-34ISWT68-42JSWT68-50K

Copper x Male Pipe3/8 x 3/81/2 x 3/81/2 x 1/21/2 x 3/43/4 x 1/23/4 x 3/41 x 1/21 x 3/41 x 1

1-1/4 x 1-1/41-1/2 x 1-1/2

2 x 22-1/2 x 2-1/2

3 x 3

Elbow 90° Short Radius - C x C

Elbow 90° Long Radius - C x C

Female Adaptor - C x FPT

Male Adaptor - C x MPT

Please Note: All copper pipe sizes are nominal pipe dimensions.

12

3

12

3

Page 64: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 64

Part No.SWT104-10SWT104-14SWT104-18SWT104-22SWT104-26SWT104-34

Copper Pipe Size1/23/41

1-1/41-1/2

2

Union (3 Piece) - C x C

Part No.SWT105-4SWT105-6SWT105-8SWT105-10SWT105-14SWT105-18SWT105-22SWT105-26SWT105-34SWT105-42SWT105-50

Copper Pipe Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

3

Wrot Copper Fittings

Elbow 45° - C x C

Wrot Copper Fittings

Please Note: All copper pipe sizes are nominal pipe dimensions.

Copper Pipe Size1/2 x 1/41/2 x 3/83/4 x 1/21 x 1/21 x 3/4

1-1/4 x 1/21-1/4 x 3/41-1/4 x 1

1-1/2 x 1/21-1/2 x 3/41-1/2 x 1

1-1/2 x 1-1/42 x 1/22 x 3/42 x 1

2 x 1-1/42 x 1-1/22-1/2 x 1

2-1/2 x 1-1/42-1/2 x 1-1/2

2-1/2 x 23 x 1-1/2

3 x 2

Part No.SWT110-10-6SWT110-10-8SWT110-14-10SWT110-18-10SWT110-18-14SWT110-22-10SWT110-22-14SWT110-22-18SWT110-26-10SWT110-26-14SWT110-26-18SWT110-26-22SWT110-34-10SWT110-34-14SWT110-34-18SWT110-34-22SWT110-34-26SWT110-42-18SWT110-42-22SWT110-42-26SWT110-42-34SWT110-50-26SWT110-50-34

Part No.SWT116-10SWT116-12SWT116-14SWT116-18SWT116-22SWT116-26SWT116-34

Copper Pipe Size1/25/83/41

1-1/41-1/2

2

Street Elbow 90° Short Radius - FTG x CPart No.SWT108-6SWT108-8SWT108-10SWT108-14SWT108-18SWT108-22SWT108-26SWT108-34SWT108-42SWT108-50SWT108-66

Copper Pipe Size1/43/81/23/41

1-1/41-1/2

22-1/2

34

Cap - C

Bushing - FTG x C

Page 65: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 65

Part No.SWT116-10-LRSWT116-12-LRSWT116-14-LRSWT116-18-LRSWT116-22-LRSWT116-26-LRSWT116-34-LR

Part No.SWT124-10SWT124-14SWT124-18SWT124-22SWT124-26SWT124-34

Copper Pipe Size1/25/83/41

1-1/41-1/2

2

Copper Pipe Size1/23/41

1-1/41-1/2

2

Street Elbow 90° Long Radius - FTG x C

Street Elbow 45° - FTG x C

Please Note: All copper pipe sizes are nominal pipe dimensions.

Description30" x 15" x 1/8" thick

30" x 15" x 3/16" thick

36" x 20" x 3/16" thick

48" x 24" c/w cross brace

Part No.M-MB-30L

M-MB-5

M-MB-36 M-MB-48CB

Heavy Duty 2"x 2" Steel Angle Iron - Painted Black

Air Conditioning Mounting Brackets

Other sizes are available. Please contact your territory manager or our customer service.

Wrot Copper Fittings

Yellow PVC Printed "Natural Gas" Tape

Tapes & Fluids

Part No.NATURAL GAS TAPE

Description48mm x 33 metre Roll

Part No.PIPE WRAP

Description48mm x 33 metre Roll

Black Polyethylene ( 10 mil ) Gas Pipe Wrap

Part No.LD500LD4L

Description500ml Spray Bottle

4 litres Jug

All Purpose Leak Detector

Part No.CO1LCO4L

Description1 litre Bottle4 litres Jug

Clear Cutting Oil

Part No.FO3.5L

"Fast Orange" Hand Cleaner c/w Pumice Description

3.5 litres

Thread Sealants

Masters Metallic CompoundDescription

250ml (brush top)1 litre (plain top)4 litres (plain top)

Part No.CP250BTCP1LCP4L

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 66: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 66

Thread Sealants

Masters Non-Metallic CompoundDescription

250ml (brush top)1 litre (plain top)4 litres (plain top)

Masters Pro-Dope C/W Tefl on®Description

250ml (brush top)1 litre (plain top)4 litres (plain top)

Description250ml (brush top)1 litre (plain top)4 litres (plain top)

Masters No-Leak

Part No.NM250BTNM1LNM4L

Part No.PD250BTPD1LPD4L

Part No.NL250BTNL1LNL4L

U.L.C. Rated Yellow Tefl on Tape

U.L.C. Rated Pink/Orange Tefl on Tape

Part No.ULC121-M8YW

Part No.ULC121-M8PK

Description1/2" Wide x 480" Long

Description1/2" Wide x 540" Long

Length12"18"24"36"48"60"72"

Gas Connector (1/2 ID x 5/8 OD) - 3/4 FPT x 3/4 FPT

Gas Connector (1/2 ID x 5/8 OD) - 1/2 FPT x 1/2 FPT

Gas Connector (1/2 ID x 5/8 OD) - 3/4 FPT x 1/2 FPT

Part No.SSC110-ED12SSC110-ED18SSC110-ED24SSC110-ED36SSC110-ED48SSC110-ED60SSC110-ED72

Gas Connector (1/2 ID x 5/8 OD) - 3/4 MPT x 1/2 FPT

Stainless Steel Gas Range Connectors

Part No.SSC103-D12SSC103-D18SSC103-D24SSC103-D36SSC103-D48SSC103-D60SSC103-D72

Part No.SSC103-E12SSC103-E18SSC103-E24SSC103-E36SSC103-E48SSC103-E60SSC103-E72

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Part No.SSC119-ED12SSC119-ED18SSC119-ED24SSC119-ED36SSC119-ED48SSC119-ED60SSC119-ED72

Length12"18"24"36"48"60"72"

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 67: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 67

Part No.SSC120-ED12SSC120-ED18SSC120-ED24SSC120-ED36SSC120-ED48SSC120-ED60SSC120-ED72

Gas Connector (1/2 ID x 5/8 OD) - 3/4 FPT x 1/2 MPT

Gas Connector (1/2 ID x 5/8 OD) - 3/4 FPT x 3/4 MPT

Part No.SSC122-D12SSC122-D18SSC122-D24SSC122-D36SSC122-D48SSC122-D60SSC122-D72

Gas Connector (1/2 ID x 5/8 OD) - 1/2 MPT x 1/2 MPT

Gas Connector (1/2 ID x 5/8 OD) - 1/2 FPT x 1/2 MPTPart No.SSC120-D12SSC120-D18SSC120-D24SSC120-D36SSC120-D48SSC120-D60SSC120-D72

Part No.SSC120-E12SSC120-E18SSC120-E24SSC120-E36SSC120-E48SSC120-E60SSC120-E72

Stainless Steel Gas Range Connectors

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Part No.SSC122-ED12SSC122-ED18SSC122-ED24SSC122-ED36SSC122-ED48SSC122-ED60SSC122-ED72

Gas Connector (1/2 ID x 5/8 OD) - 3/4 MPT x 1/2 MPT

Part No.SSC122-E12SSC122-E18SSC122-E24SSC122-E36SSC122-E48SSC122-E60SSC122-E72

Gas Connector (1/2 ID x 5/8 OD) - 3/4 MPT x 3/4 MPT

Stainless Steel Gas Range Connectors

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Description15/16-16 x 1/2 FPT15/16-16 x 3/4 FPT

Part No.SSC46-10DSSC46-10E

Description15/16-16 x 1/2 MPT15/16-16 x 3/4 MPT

Part No.SSC48-10DSSC48-10E

Steel Female Adaptor For 5/8 OD Connectors

Steel Male Adaptor For 5/8 OD Connectors

Stainless Steel Gas Range Connector Adaptors

Page 68: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 68

Part No.SSC103-8C12SSC103-8C18SSC103-8C24SSC103-8C36SSC103-8C48SSC103-8C60SSC103-8C72

Gas Connector (3/8 ID x 1/2 OD) - 3/8 FPT x 3/8 FPT

Gas Connector (3/8 ID x 1/2 OD) -1/2 FPT x 1/2 FPTPart No.SSC103-8D12SSC103-8D18SSC103-8D24SSC103-8D36SSC103-8D48SSC103-8D60SSC103-8D72

Stainless Steel Gas Dryer Connectors

Gas Connector (3/8 ID x 1/2 OD) - 1/2 FPT x 3/8 FPTPart No.SSC119-8DC12SSC119-8DC18SSC119-8DC24SSC119-8DC36SSC119-8DC48SSC119-8DC60SSC119-8DC72

Part No.SSC120-8DC12SSC120-8DC18SSC120-8DC24SSC120-8DC36SSC120-8DC48SSC120-8DC60SSC120-8DC72

Gas Connector (3/8 ID x 1/2 OD) - 1/2 FPT x 3/8 MPT

Gas Connector (3/8 ID x 1/2 OD) - 1/2 FPT x 1/2 MPTPart No.SSC120-8D12SSC120-8D18SSC120-8D24SSC120-8D36SSC120-8D48SSC120-8D60SSC120-8D72

Gas Connector (3/8 ID x 1/2 OD) - 3/8 FPT x 3/8 MPT

Stainless Steel Gas Dryer Connectors

Part No.SSC120-8C12SSC120-8C18SSC120-8C24SSC120-8C36SSC120-8C48SSC120-8C60SSC120-8C72

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Gas Connector (3/8 ID x 1/2 OD) - 3/8 MPT x 3/8 MPTPart No.SSC122-8C12SSC122-8C18SSC122-8C24SSC122-8C36SSC122-8C48SSC122-8C60SSC122-8C72

Gas Connector (3/8 ID x 1/2 OD) - 1/2 MPT x 1/2 MPTPart No.SSC122-8D12SSC122-8D18SSC122-8D24SSC122-8D36SSC122-8D48SSC122-8D60SSC122-8D72

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Page 69: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 69

Stainless Steel Gas Dryer Connectors

Gas Connector (3/8 ID x 1/2 OD) - 1/2 MPT x 3/8 MPTPart No.SSC122-8DC12SSC122-8DC18SSC122-8DC24SSC122-8DC36SSC122-8DC48SSC122-8DC60SSC122-8DC72

Length12"18"24"36"48"60"72"

Stainless Steel Gas Dryer Connector Adaptors

Steel Female Adaptor For 1/2 OD ConnectorsPart No.SSC46-8CSSC46-8D

Description1/2 OD x 3/8 FPT 1/2 OD x 1/2 FPT

Part No.SSC48-8CSSC48-8D

Description1/2 OD x 3/8 MPT 1/2 OD x 1/2 MPT

Steel Male Adaptor For 1/2 OD Connectors

Gas Connector (1/4 ID x 3/8 OD) - 3/8 FPT x 3/8 FPT

Gas Connector (1/4 ID x 3/8 OD) - 1/2 FPT x 1/2 FPT

Part No.SSC103-6C12SSC103-6C18SSC103-6C24SSC103-6C36SSC103-6C48SSC103-6C60SSC103-6C72

Part No.SSC103-6D12SSC103-6D18SSC103-6D24SSC103-6D36SSC103-6D48SSC103-6D60SSC103-6D72

Gas Connector (1/4 ID x 3/8 OD) - 1/2 FPT x 3/8 FPTPart No.SSC119-6DC12SSC119-6DC18SSC119-6DC24SSC119-6DC36SSC119-6DC48SSC119-6DC60SSC119-6DC72

Part No.SSC120-6C12SSC120-6C18SSC120-6C24SSC120-6C36SSC120-6C48SSC120-6C60SSC120-6C72

Gas Connector (1/4 ID x 3/8 OD) - 3/8 FPT x 3/8 MPT

Stainless Steel Gas Heater Connectors

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 70: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 70

Gas Connector (1/4 ID x 3/8 OD) - 1/2 FPT x 1/2 MPTPart No.SSC120-6D12SSC120-6D18SSC120-6D24SSC120-6D36SSC120-6D48SSC120-6D60SSC120-6D72

Gas Connector (1/4 ID x 3/8 OD) - 1/2 FPT x 3/8 MPTPart No.SSC120-6DC12SSC120-6DC18SSC120-6DC24SSC120-6DC36SSC120-6DC48SSC120-6DC60SSC120-6DC72

Gas Connector (1/4 ID x 3/8 OD) - 3/8 MPT x 3/8 MPTPart No.SSC122-6C12SSC122-6C18SSC122-6C24SSC122-6C36SSC122-6C48SSC122-6C60SSC122-6C72

Gas Connector (1/4 ID x 3/8 OD) - 1/2 MPT x 1/2 MPTPart No.SSC122-6D12SSC122-6D18SSC122-6D24SSC122-6D36SSC122-6D48SSC122-6D60SSC122-6D72

Stainless Steel Gas Heater Connectors

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Length12"18"24"36"48"60"72"

Stainless Steel Gas Heater Connector Adaptors

Gas Connector (1/4 ID x 3/8 OD) - 1/2 MPT x 3/8 MPTPart No.SSC122-6DC12SSC122-6DC18SSC122-6DC24SSC122-6DC36SSC122-6DC48SSC122-6DC60SSC122-6DC72

Steel Female Adaptor For 3/8 OD ConnectorsDescription

3/8 OD x 3/8 FPT 3/8 OD x 1/2 FPT

Part No.SSC46-6CSSC46-6D

Part No.SSC48-6CSSC48-6D

Description3/8 OD x 3/8 MPT 3/8 OD x 1/2 MPT

Steel Male Adaptor For 3/8 OD Connectors

Stainless Steel Gas Heater Connectors

Length12"18"24"36"48"60"72"

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 71: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 71

Black Pipe - Plain Ends10-1/2 Foot Lengths - Schedule 40Part No.MPP-DX101/2MPP-EX101/2MPP-FX101/2MPP-GX101/2MPP-HX101/2MPP-IX101/2

Size1/23/41

1-1/41-1/2

2

Also available threaded and coupled,please check with our customer service for details.Prices on request due to the fl uctuating metal price.

Steel Pipe Black Malleable Pipe Fittings - Sch. 40

Black Malleable Elbow 90° - FPT x FPTPart No. MP100-AMP100-BMP100-BAMP100-CMP100-CAMP100-CBMP100-DMP100-DAMP100-DBMP100-DCMP100-EMP100-EAMP100-EBMP100-ECMP100-EDMP100-FMP100-FCMP100-FDMP100-FEMP100-GMP100-GDMP100-GEMP100-GFMP100-HMP100-HDMP100-HEMP100-HFMP100-HGMP100-IMP100-IDMP100-IEMP100-IFMP100-IGMP100-IHMP100-JMP100-JFMP100-JGMP100-JHMP100-JIMP100-KMP100-KHMP100-KIMP100-KJMP100-L

Black Pipe - Plain Ends21 Foot Lengths - Schedule 40

Size1/23/41

1-1/41-1/2

2

Part No.MPP-DX21MPP-EX21MPP-FX21MPP-GX21MPP-HX21MPP-IX21

Size (Box Qty)1/8 (50)1/4 (35)

1/4 x 1/8 (40)3/8 (45)

3/8 x 1/8 (60)3/8 x 1/4 (60)

1/2 (50)1/2 x 1/8 (50)1/2 x 1/4 (50)1/2 x 3/8 (50)

3/4 (35)3/4 x 1/8 (30)3/4 x 1/4 (30)3/4 x 3/8 (30)3/4 x 1/2 (30)

1 (20)1 x 3/8 (25)1 x 1/2 (25)1 x 3/4 (25)1-1/4 (20)

1-1/4 x 1/2 (10)1-1/4 x 3/4 (10)1-1/4 x 1 (10)

1-1/2 (10)1-1/2 x 1/2 (15)1-1/2 x 3/4 (15)1-1/2 x 1 (15)

1-1/2 x 1-1/4 (15)2 (8)

2 x 1/2 (10)2 x 3/4 (10)2 x 1 (10)

2 x 1-1/4 (10)2 x 1-1/2 (10)

2-1/2 (6)2-1/2 x 1 (8)

2-1/2 x 1-1/4 (8)2-1/2 x 1-1/2 (8)

2-1/2 x 2 (8)3 (7)

3 x 1-1/2 (6)3 x 2 (6)

3 x 2-1/2 (6)4 (6)

Please Note:Black pricing based on box qty. stated in brackets

Page 72: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 72

1 2

3Black Malleable Tee - FPT x FPT x FPT

Part No. MP101-AMP101-BMP101-BAMP101-CMP101-CBMP101-DMP101-DBMP101-DCMP101-DEMP101-DFMP101-EMP101-EBMP101-ECMP101-EDMP101-EDDMP101-EDEMP101-EDFMP101-EFMP101-FMP101-FBMP101-FCMP101-FDMP101-FDDMP101-FDEMP101-FDFMP101-FEMP101-FEDMP101-FEEMP101-FEFMP101-FGMP101-FHMP101-FIMP101-GMP101-GCMP101-GDMP101-GDDMP101-GDEMP101-GDFMP101-GDGMP101-GEMP101-GEDMP101-GEEMP101-GEFMP101-GEGMP101-GFMP101-GFDMP101-GFEMP101-GFFMP101-GFGMP101-GH

Part No. MP101-HMP101-HDMP101-HDGMP101-HDHMP101-HEMP101-HEDMP101-HEEMP101-HEFMP101-HEGMP101-HEHMP101-HFMP101-HFEMP101-HFFMP101-HFGMP101-HFHMP101-HGMP101-HGFMP101-HGGMP101-HGHMP101-HIMP101-IMP101-IDMP101-IDDMP101-IDIMP101-IEMP101-IEEMP101-IEIMP101-IFMP101-IFEMP101-IFFMP101-IFGMP101-IFHMP101-IFIMP101-IGMP101-IGGMP101-IGHMP101-IGIMP101-IHMP101-IHDMP101-IHEMP101-IHGMP101-IHHMP101-IJMP101-JMP101-JFMP101-JIMP101-KMP101-KFMP101-KGMP101-KHMP101-KIMP101-KJMP101-L

Black Malleable Pipe Fittings - Sch. 40Black Malleable Pipe Fittings - Sch. 40

Black Malleable Tee (Continued) - FPT x FPT x FPT

Size (Box Qty)1/8 (80)1/4 (50)

1/4 x 1/4 x 1/8 (40)3/8 (30)

3/8 x 3/8 x 1/4 (45)1/2 (40)

1/2 x 1/2 x 1/4 (30)1/2 x 1/2 x 3/8 (30)1/2 x 1/2 x 3/4 (30)1/2 x 1/2 x 1 (25)

3/4 (35)3/4 x 3/4 x 1/4 (30)3/4 x 3/4 x 3/8 (30)3/4 x 3/4 x 1/2 (30)3/4 x 1/2 x 1/2 (30)3/4 x 1/2 x 3/4 (30)3/4 x 1/2 x 1 (25)3/4 x 3/4 x 1 (25)

1 (20)1 x 1 x 1/4 (25)1 x 1 x 3/8 (25)1 x 1 x 1/2 (25)

1 x 1/2 x 1/2 (25)1 x 1/2 x 3/4 (25)1 x 1/2 x 1 (25)1 x 1 x 3/4 (25)

1 x 3/4 x 1/2 (25)1 x 3/4 x 3/4 (25)1 x 3/4 x 1 (25)

1 x 1 x 1-1/4 (16)1 x 1 x 1-1/2 (15)

1 x 1 x 2 (8)1-1/4 (14)

1-1/4 x 1-1/4 x 3/8 (16)1-1/4 x 1-1/4 x 1/2 (16)1-1/4 x 1/2 x 1/2 (16)1-1/4 x 1/2 x 3/4 (16)1-1/4 x 1/2 x 1 (16)

1-1/4 x 1/2 x 1-1/4 (16)1-1/4 x 1-1/4 x 3/4 (16)1-1/4 x 3/4 x 1/2 (16)1-1/4 x 3/4 x 3/4 (16)1-1/4 x 3/4 x 1 (16)

1-1/4 x 3/4 x 1-1/4 (16)1-1/4 x 1-1/4 x 1 (16)1-1/4 x 1 x 1/2 (16)1-1/4 x 1 x 3/4 (16)1-1/4 x 1 x 1 (16)

1-1/4 x 1 x 1-1/4 (16)1-1/4 x 1-1/4 x 1-1/2 (15)

Size (Box Qty)1-1/2 (15)

1-1/2 x 1-1/2 x 1/2 (15)1-1/2 x 1/2 x 1-1/4 (15)1-1/2 x 1/2 x 1-1/2 (15)1-1/2 x 1-1/2 x 3/4 (15)1-1/2 x 3/4 x 1/2 (15)1-1/2 x 3/4 x 3/4 (15)1-1/2 x 3/4 x 1 (15)

1-1/2 x 3/4 x 1-1/4 (15)1-1/2 x 3/4 x 1-1/2 (15)

1-1/2 x 1-1/2 x 1-1/4 (15)1-1/2 x 1 x 3/4 (15)1-1/2 x 1 x 1 (15)

1-1/2 x 1 x 1-1/4 (15)1-1/2 x 1 x 1-1/2 (15)

1-1/2 x 1-1/2 x 1-1/4 (15)1-1/2 x 1-1/4 x 1 (15)

1-1/2 x 1-1/4 x 1-1/4 (15)1-1/2 x 1-1/4 x 1-1/2 (15)

1-1/2 x 1-1/2 x 2 (8)2 (10)

2 x 2 x 1/2 (8)2 x 1/2 x 1/2 (8)2 x 1/2 x 2 (8)2 x 2 x 3/4 (8)

2 x 3/4 x 3/4 (8)2 x 3/4 x 2 (8)2 x 2 x 1 (8)

2 x 1 x 3/4 (8)2 x 1 x 1 (8)

2 x 1 x 1-1/4 (8)2 x 1 x 1-1/2 (8)

2 x 1 x 2 (8)2 x 2 x 1-1/4 (8)

2 x 1-1/4 x 1-1/4 (8)2 x 1-1/4 x 1-1/2 (8)

2 x 1-1/4 x 2 (8)2 x 2 x 1-1/2 (8)

2 x 1-1/2 x 1/2 (8)2 x 1-1/2 x 3/4 (8)

2 x 1-1/2 x 1-1/4 (8)2 x 1-1/2 x 1-1/2 (8)

2 x 2 x 2-1/2 (8)2-1/2 (8)

2-1/2 x 2-1/2 x 1 (8)2-1/2 x 2-1/2 x 2 (8)

3 (6)3 x 3 x 1 (6)

3 x 3 x 1-1/4 (6)3 x 3 x 1-1/2 (6)

3 x 3 x 2 (6)3 x 3 x 2-1/2 (6)

4 (6)

Page 73: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 73

Black Malleable Pipe Fittings - Sch. 40Black Malleable Pipe Fittings - Sch. 40

Part No. MP102-AMP102-BMP102-CMP102-DMP102-EMP102-FMP102-GMP102-HMP102-IMP102-JMP102-KMP102-L

Part No. MP104-AMP104-BMP104-CMP104-DMP104-EMP104-FMP104-GMP104-HMP104-IMP104-JMP104-KMP104-L

Part No. MP103-AMP103-BMP103-CMP103-DMP103-EMP103-FMP103-GMP103-HMP103-IMP103-JMP103-KMP103-L

Black Malleable Coupling - FPT x FPT

Black Malleable Cross - FPT x FPT x FPT x FPT Black Malleable Elbow 45° - FPT x FPT

Black Malleable Union (Brass to Iron Seat) - FPT x FPT Black Malleable Square Head Plug - MPT

Black Malleable Cap - FPT

Part No. MP105-AMP105-BMP105-CMP105-DMP105-EMP105-FMP105-GMP105-HMP105-IMP105-JMP105-KMP105-L

Part No. MP108-AMP108-BMP108-CMP108-DMP108-EMP108-FMP108-GMP108-HMP108-IMP108-JMP108-KMP108-L

Part No. MP109-AMP109-BMP109-CMP109-DMP109-EMP109-FMP109-GMP109-HMP109-IMP109-JMP109-KMP109-L

Size (Box Qty)1/8 (30)1/4 (40)3/8 (25)1/2 (30)3/4 (20)1 (15)

1-1/4 (20)1-1/2 (18)

2 (10)2-1/2 (12)

3 (8)4 (4)

Size (Box Qty)1/8 (70)1/4 (40)3/8 (50)1/2 (40)3/4 (50)1 (25)

1-1/4 (16)1-1/2 (18)

2 (12)2-1/2 (8)

3 (8)4 (7)

Size (Box Qty)1/8 (30)1/4 (20)3/8 (20)1/2 (50)3/4 (35)1 (20)

1-1/4 (15)1-1/2 (10)

2 (6)2-1/2 (8)

3 (7)4 (7)

Size (Box Qty)1/8 (50)1/4 (30)3/8 (30)1/2 (50)3/4 (40)1 (20)

1-1/4 (20)1-1/2 (10)

2 (12)2-1/2 (9)

3 (10)4 (6)

Size (Box Qty)1/8 (120)1/4 (80)3/8 (60)1/2 (75)3/4 (40)1 (35)

1-1/4 (25)1-1/2 (25)

2 (18)2-1/2 (28)

3 (21)4 (7)

Size (Box Qty)1/8 (300)1/4 (150)3/8 (100)1/2 (50)3/4 (30)1 (20)

1-1/4 (40)1-1/2 (30)

2 (20)2-1/2 (16)

3 (16)4 (8)

Please Note:Black pricing based on box qty. stated in brackets

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 74: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 74

Black Malleable Pipe Fittings - Sch. 40Black Malleable Pipe Fittings - Sch. 40

Part No. MP110-BAMP110-CAMP110-CBMP110-DAMP110-DBMP110-DCMP110-EAMP110-EBMP110-ECMP110-EDMP110-FBMP110-FCMP110-FDMP110-FEMP110-GAMP110-GBMP110-GCMP110-GDMP110-GEMP110-GFMP110-HBMP110-HCMP110-HDMP110-HEMP110-HFMP110-HGMP110-ICMP110-IDMP110-IEMP110-IFMP110-IGMP110-IHMP110-JDMP110-JFMP110-JGMP110-JHMP110-JIMP110-KFMP110-KGMP110-KHMP110-KIMP110-KJMP110-LFMP110-LGMP110-LHMP110-LIMP110-LJMP110-LK

Part No. MP111-DMP111-EMP111-FMP111-GMP111-HMP111-I

Black Malleable Bushing - MPT x FPT Black Malleable Lock Nut - FPS

Black Malleable Street Elbow 90° - FPT x MPTPart No. MP116-AMP116-BMP116-CMP116-DMP116-EMP116-FMP116-GMP116-HMP116-IMP116-JMP116-KMP116-L

Black Malleable Countersunk Hex/Square Plug - MPTPart No. MP118-AMP118-BMP118-CMP118-DMP118-EMP118-FMP118-GMP118-HMP118-I

Size (Box Qty)1/4 x 1/8 (120)3/8 x 1/8 (75)3/8 x 1/4 (75)1/2 x 1/8 (100) 1/2 x 1/4 (100)1/2 x 3/8 (100)3/4 x 1/8 (50)3/4 x 1/4 (50)3/4 x 3/8 (50)3/4 x 1/2 (50)1 x 1/4 (50)1 x 3/8 (50)1 x 1/2 (50)1 x 3/4 (50)

1-1/4 x 1/8 (30)1-1/4 x 1/4 (30)1-1/4 x 3/8 (30)1-1/4 x 1/2 (30)1-1/4 x 3/4 (30)1-1/4 x 1 (30)

1-1/2 x 1/4 (25)1-1/2 x 3/8 (25)1-1/2 x 1/2 (25)1-1/2 x 3/4 (25)1-1/2 x 1 (25)

1-1/2 x 1-1/4 (25)2 x 3/8 (20)2 x 1/2 (20)2 x 3/4 (20)2 x 1 (20)

2 x 1-1/4 (20)2 x 1-1/2 (20)

2-1/2 x 1/2 (15)2-1/2 x 1 (15)

2-1/2 x 1-1/4 (15)2-1/2 x 1-1/2 (15)

2-1/2 x 2 (15)3 x 1 (12)

3 x 1-1/4 (12)3 x 1-1/2 (12)

3 x 2 (12)3 x 2-1/2 (12)

4 x 1 (5)4 x 1-1/4 (5)4 x 1-1/2 (5)

4 x 2 (5)4 x 2-1/2 (5)

4 x 3 (5 )

Size (Box Qty)1/8 (100)1/4 (100)3/8 (100)1/2 (100)3/4 (50)1 (50)

1-1/4 (50)1-1/2 (25)

2 (20)

Size (Box Qty)1/2 (100)3/4 (60)1 (40)

1-1/4 (30)1-1/2 (45)

2 (25)

Size (Box Qty)1/8 (60)1/4 (35)3/8 (40)1/2 (60)3/4 (35)1 (30)

1-1/4 (25)1-1/2 (9)

2 (10)2-1/2 (9)

3 (7)4 (6)

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 75: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 75

Black Malleable Reducing Coupling - FPT x FPTPart No. MP119-BAMP119-CAMP119-CBMP119-DAMP119-DBMP119-DCMP119-EAMP119-EBMP119-ECMP119-EDMP119-FBMP119-FCMP119-FDMP119-FEMP119-GCMP119-GDMP119-GEMP119-GFMP119-HDMP119-HEMP119-HFMP119-HGMP119-IDMP119-IEMP119-IFMP119-IGMP119-IHMP119-JFMP119-JGMP119-JHMP119-JIMP119-KFMP119-KGMP119-KHMP119-KIMP119-KJMP119-LHMP119-LIMP119-LJMP119-LK

Part No. MP124-AMP124-BMP124-CMP124-DMP124-EMP124-FMP124-GMP124-HMP124-I

Part No. MPF-DMPF-EMPF-FMPF-GMPF-HMPF-I

Black Malleable Floor Flange - FPT

Black Malleable Street Elbow 45° - FPT x MPT

Black Malleable Pipe Fittings - Sch. 40Black Malleable Pipe Fittings - Sch. 40

Black Steel Close Nipple - MPT x MPTPart No. MP112-AMP112-BMP112-CMP112-DMP112-EMP112-FMP112-GMP112-HMP112-IMP112-JMP112-KMP112-L

Black Steel Pipe Nipples - Sch. 40

Size (Box Qty)1/4 x 1/8 (50)3/8 x 1/8 (30)3/8 x 1/4 (30)1/2 x 1/8 (40)1/2 x 1/4 (40)1/2 x 3/8 (40)3/4 x 1/8 (60)3/4 x 1/4 (60)3/4 x 3/8 (60)3/4 x 1/2 (60)1 x 1/4 (25)1 x 3/8 (25)1 x 1/2 (25)1 x 3/4 (25)

1-1/4 x 3/8 (15)1-1/4 x 1/2 (15)1-1/4 x 3/4 (15)1-1/4 x 1 (15)

1-1/2 x 1/2 (12)1-1/2 x 3/4 (12)1-1/2 x 1 (12)

1-1/2 x 1-1/4 (12)2 x 1/2 (12)2 x 3/4 (12)2 x 1 (12)

2 x 1-1/4 (12)2 x 1-1/2 (12)2-1/2 x 1 (10)

2-1/2 x 1-1/4 (10)2-1/2 x 1-1/2 (10)

2-1/2 x 2 (10)3 x 1 (12)

3 x 1-1/4 (12)3 x 1-1/2 (12)

3 x 2 (12)3 x 2-1/2 (12)4 x 1-1/2 (6)

4 x 2 (6)4 x 2-1/2 (6)

4 x 3 (6)

Size (Box Qty)1/8 (70)1/4 (40)3/8 (50)1/2 (75)3/4 (40)1 (25)

1-1/4 (10)1-1/2 (10)

2 (12)

Size (Box Qty)1/2 (25)3/4 (20)1 (20)

1-1/4 (15)1-1/2 (12)

2 (8)

Size x Length (Box Qty)1/8 x 3/4 (25)1/4 x 7/8 (25)3/8 x 1 (25)

1/2 x 1-1/8 (25)3/4 x 1-3/8 (25)1 x 1-1/2 (25)

1-1/4 x 1-5/8 (25)1-1/2 x 1-3/4 (25)

2 x 2 (25)2-1/2 x 2-1/2 (25)

3 x 2-5/8 (25)4 x 2-7/8 (25)

Please Note:Black pricing based on box qty. stated in brackets

Page 76: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 76

Black Steel Pipe Nipples - Sch. 40

Part No. MP113-A11/2 MP113-A2MP113-A21/2MP113-A3MP113-A31/2MP113-A4MP113-A41/2MP113-A5MP113-A51/2MP113-A6MP113-A7MP113-A8MP113-A9MP113-A10MP113-A11MP113-A12

MP113-B11/2MP113-B2MP113-B21/2MP113-B3MP113-B31/2MP113-B4MP113-B41/2MP113-B5MP113-B51/2MP113-B6MP113-B7MP113-B8MP113-B9MP113-B10MP113-B11MP113-B12

MP113-C11/2MP113-C2MP113-C21/2MP113-C3MP113-C31/2MP113-C4MP113-C41/2MP113-C5MP113-C51/2MP113-C6MP113-C7MP113-C8MP113-C9MP113-C10MP113-C11MP113-C12

Black Steel Pipe Nipples - Sch. 40

Black Steel Pipe Nipple - MPT x MPT

Part No.MP113-D11/2MP113-D2MP113-D21/2MP113-D3MP113-D31/2MP113-D4MP113-D41/2MP113-D5MP113-D51/2MP113-D6MP113-D7MP113-D8MP113-D9MP113-D10MP113-D11MP113-D12

MP113-E11/2MP113-E2MP113-E21/2MP113-E3MP113-E31/2MP113-E4MP113-E41/2MP113-E5MP113-E51/2MP113-E6MP113-E7MP113-E8MP113-E9MP113-E10MP113-E11MP113-E12

MP113-F2MP113-F21/2MP113-F3MP113-F31/2MP113-F4MP113-F41/2MP113-F5MP113-F51/2MP113-F6MP113-F7MP113-F8MP113-F9MP113-F10MP113-F11MP113-F12

Black Steel Pipe Nipple - MPT x MPT (Continued)

Size x Length (Box Qty)1/8 x 1-1/2 (25)

1/8 x 2 (25)1/8 x 2-1/2 (25)

1/8 x 3 (25)1/8 x 3-1/2 (25)

1/8 x 4 (25)1/8 x 4-1/2 (25)

1/8 x 5 (25)1/8 x 5-1/2 (25)

1/8 x 6 (25)1/8 x 7 (10)1/8 x 8 (10)1/8 x 9 (10)1/8 x 10 (10)1/8 x 11 (10)1/8 x 12 (10)

1/4 x 1-1/2 (25)1/4 x 2 (25)

1/4 x 2-1/2 (25)1/4 x 3 (25)

1/4 x 3-1/2 (25)1/4 x 4 (25)

1/4 x 4-1/2 (25)1/4 x 5 (25)

1/4 x 5-1/2 (25)1/4 x 6 (25)1/4 x 7 (10)1/4 x 8 (10)1/4 x 9 (10)1/4 x 10 (10)1/4 x 11 (10)1/4 x 12 (10)

3/8 x 1-1/2 (25)3/8 x 2 (25)

3/8 x 2-1/2 (25)3/8 x 3 (25)

3/8 x 3-1/2 (25)3/8 x 4 (25)

3/8 x 4-1/2 (25)3/8 x 5 (25)

3/8 x 5-1/2 (25)3/8 x 6 (25)3/8 x 7 (10)3/8 x 8 (10)3/8 x 9 (10)3/8 x 10 (10)3/8 x 11 (10)3/8 x 12 (10)

Size x Length (Box Qty)1/2 x 1-1/2 (25)

1/2 x 2 (25)1/2 x 2-1/2 (25)

1/2 x 3 (25)1/2 x 3-1/2 (25)

1/2 x 4 (25)1/2 x 4-1/2 (25)

1/2 x 5 (25)1/2 x 5-1/2 (25)

1/2 x 6 (25)1/2 x 7 (10)1/2 x 8 (10)1/2 x 9 (10)1/2 x 10 (10)1/2 x 11 (10)1/2 x 12 (10)

3/4 x 1-1/2 (25)

3/4 x 2 (25)3/4 x 2-1/2 (25)

3/4 x 3 (25)3/4 x 3-1/2 (25)

3/4 x 4 (25)3/4 x 4-1/2 (25)

3/4 x 5 (25)3/4 x 5-1/2 (25)

3/4 x 6 (25)3/4 x 7 (10)3/4 x 8 (10)3/4 x 9 (10)3/4 x 10 (10)3/4 x 11 (10)3/4 x 12 (10)

1 x 2 (25)1 x 2-1/2 (25)

1 x 3 (25)1 x 3-1/2 (25)

1 x 4 (25)1 x 4-1/2 (25)

1 x 5 (25)1 x 5-1/2 (25)

1 x 6 (25)1 x 7 (10)1 x 8 (10)1 x 9 (10)1 x 10 (10)1 x 11 (10)1 x 12 (10)

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 77: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 77

Black Steel Pipe Nipples - Sch. 40 Black Steel Pipe Nipples - Sch. 40

Part No.MP113-G2MP113-G21/2MP113-G3MP113-G31/2MP113-G4MP113-G41/2MP113-G5MP113-G51/2MP113-G6MP113-G7MP113-G8MP113-G9MP113-G10MP113-G11MP113-G12

MP113-H2MP113-H21/2MP113-H3MP113-H31/2MP113-H4MP113-H41/2MP113-H5MP113-H51/2MP113-H6MP113-H7MP113-H8MP113-H9MP113-H10MP113-H11MP113-H12

MP113-I21/2MP113-I3MP113-I31/2MP113-I4MP113-I41/2MP113-I5MP113-I51/2MP113-I6MP113-I7MP113-I8MP113-I9MP113-I10MP113-I11MP113-I12

Part No.MP113-J3MP113-J31/2MP113-J4MP113-J41/2MP113-J5MP113-J51/2MP113-J6MP113-J7MP113-J8MP113-J9MP113-J10MP113-J11MP113-J12

MP113-K3MP113-K31/2MP113-K4MP113-K41/2MP113-K5MP113-K51/2MP113-K6MP113-K7MP113-K8MP113-K9MP113-K10MP113-K11MP113-K12

MP113-L4MP113-L41/2MP113-L5MP113-L51/2MP113-L6MP113-L7MP113-L8MP113-L9MP113-L10MP113-L11MP113-L12

Black Steel Pipe Nipple - MPT x MPT (Continued)

Black Steel Pipe Nipple - MPT x MPT (Continued)Size x Length (Box Qty)

1-1/4 x 2 (25)1-1/4 x 2-1/2 (25)

1-1/4 x 3 (25)1-1/4 x 3-1/2 (25)

1-1/4 x 4 (25)1-1/4 x 4-1/2 (25)

1-1/4 x 5 (25)1-1/4 x 5-1/2 (25)

1-1/4 x 6 (25)1-1/4 x 7 (10)1-1/4 x 8 (10)1-1/4 x 9 (10)1-1/4 x 10 (10)1-1/4 x 11 (10)1-1/4 x 12 (10)

1-1/2 x 2 (25)1-1/2 x 2-1/2 (25)

1-1/2 x 3 (25)1-1/2 x 3-1/2 (25)

1-1/2 x 4 (25)1-1/2 x 4-1/2 (25)

1-1/2 x 5 (25)1-1/2 x 5-1/2 (25)

1-1/2 x 6 (25)1-1/2 x 7 (10)1-1/2 x 8 (10)1-1/2 x 9 (10)1-1/2 x 10 (10)1-1/2 x 11 (10)1-1/2 x 12 (10)

2 x 2-1/2 (25)2 x 3 (25)

2 x 3-1/2 (25)2 x 4 (25)

2 x 4-1/2 (25)2 x 5 (25)

2 x 5-1/2 (25)2 x 6 (25)2 x 7 (10)2 x 8 (10)2 x 9 (10)2 x 10 (10)2 x 11 (10)2 x 12 (10)

Size x Len gth (Box Qty)2-1/2 x 3 (25)

2-1/2 x 3-1/2 (25)2-1/2 x 4 (25)

2-1/2 x 4-1/2 (25)2-1/2 x 5 (25)

2-1/2 x 5-1/2 (25)2-1/2 x 6 (25)2-1/2 x 7 (10)2-1/2 x 8 (10)2-1/2 x 9 (10)2-1/2 x 10 (10)2-1/2 x 11 (10)2-1/2 x 12 (10)

3 x 3 (25)3 x 3-1/2 (25)

3 x 4 (25)3 x 4-1/2 (25)

3 x 5 (25)3 x 5-1/2 (25)

3 x 6 (25)3 x 7 (10)3 x 8 (10)3 x 9 (10)3 x 10 (10)3 x 11 (10)3 x 12 (10)

4 x 4 (25)4 x 4-1/2 (25)

4 x 5 (25)4 x 5-1/2 (25)

4 x 6 (25)4 x 7 (10)4 x 8 (10)4 x 9 (10)4 x 10 (10)4 x 11 (10)4 x 12 (10)

Please Note:Black pricing based on box qty. stated in brackets

Page 78: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 78

1 2

3

Part No. GP100-AGP100-BGP100-BAGP100-CGP100-CAGP100-CBGP100-DGP100-DAGP100-DBGP100-DCGP100-EGP100-EAGP100-EBGP100-ECGP100-EDGP100-FGP100-FCGP100-FDGP100-FEGP100-GGP100-GDGP100-GEGP100-GFGP100-HGP100-HDGP100-HEGP100-HFGP100-HGGP100-IGP100-IDGP100-IEGP100-IFGP100-IGGP100-IHGP100-JGP100-JFGP100-JGGP100-JHGP100-JIGP100-KGP100-KIGP100-KJGP100-L

Galvanized Elbow 90° - FPT x FPT Galvanized Tee - FPT x FPT x FPT

Galvanized Pipe Fittings - Sch. 40

Part No. GP101-AGP101-BGP101-CGP101-CBGP101-DGP101-DBGP101-DCGP101-DEGP101-DFGP101-EGP101-ECGP101-EDGP101-EDDGP101-EDEGP101-EDFGP101-EFGP101-FGP101-FBGP101-FCGP101-FDGP101-FDDGP101-FDEGP101-FDFGP101-FEGP101-FEDGP101-FEEGP101-FEFGP101-FGGP101-FHGP101-FIGP101-GGP101-GCGP101-GDGP101-GDDGP101-GDEGP101-GDFGP101-GDGGP101-GEGP101-GEDGP101-GEEGP101-GEFGP101-GEGGP101-GFGP101-GFDGP101-GFEGP101-GFFGP101-GFGGP101-GH

Size (Box Qty)1/8 (50)1/4 (35)

1/4 x 1/8 (40)3/8 (45)

3/8 x 1/8 (60)3/8 x 1/4 (60)

1/2 (50)1/2 x 1/8 (50)1/2 x 1/4 (50)1/2 x 3/8 (50)

3/4 (35)3/4 x 1/8 (30)3/4 x 1/4 (30)3/4 x 3/8 (30)3/4 x 1/2 (30)

1 (20)1 x 3/8 (25)1 x 1/2 (25)1 x 3/4 (25)1-1/4 (20)

1-1/4 x 1/2 (10)1-1/4 x 3/4 (10)1-1/4 x 1 (10)

1-1/2 (10)1-1/2 x 1/2 (15)1-1/2 x 3/4 (15)1-1/2 x 1 (15)

1-1/2 x 1-1/4 (15)2 (8)

2 x 1/2 (10)2 x 3/4 (10)2 x 1 (10)

2 x 1-1/4 (10)2 x 1-1/2 (10)

2-1/2 (6)2-1/2 x 1 (8)

2-1/2 x 1-1/4 (8)2-1/2 x 1-1/2 (8)

2-1/2 x 2 (8)3 (7)

3 x 2 (6)3 x 2-1/2 (6)

4 (6)

Size (Box Qty)1/8 (80)1/4 (50)3/8 (30)

3/8 x 3/8 x 1/4 (45)1/2 (40)

1/2 x 1/2 x 1/4 (30)1/2 x 1/2 x 3/8 (30)1/2 x 1/2 x 3/4 (30)1/2 x 1/2 x 1 (25)

3/4 (35)3/4 x 3/4 x 3/8 (30)3/4 x 3/4 x 1/2 (30)3/4 x 1/2 x 1/2 (30)3/4 x 1/2 x 3/4 (30)3/4 x 1/2 x 1 (25)3/4 x 3/4 x 1 (25)

1 (20)1 x 1 x 1/4 (25)1 x 1 x 3/8 (25)1 x 1 x 1/2 (25)

1 x 1/2 x 1/2 (25)1 x 1/2 x 3/4 (25)1 x 1/2 x 1 (25)1 x 1 x 3/4 (25)

1 x 3/4 x 1/2 (25)1 x 3/4 x 3/4 (25)1 x 3/4 x 1 (25)

1 x 1 x 1-1/4 (16)1 x 1 x 1-1/2 (15)

1 x 1 x 2 (8)1-1/4 (14)

1-1/4 x 1-1/4 x 3/8 (16)1-1/4 x 1-1/4 x 1/2 (16)1-1/4 x 1/2 x 1/2 (16)1-1/4 x 1/2 x 3/4 (16)1-1/4 x 1/2 x 1 (16)

1-1/4 x 1/2 x 1-1/4 (16)1-1/4 x 1-1/4 x 3/4 (16)1-1/4 x 3/4 x 1/2 (16)1-1/4 x 3/4 x 3/4 (16)1-1/4 x 3/4 x 1 (16)

1-1/4 x 3/4 x 1-1/4 (16)1-1/4 x 1-1/4 x 1 (16)1-1/4 x 1 x 1/2 (16)1-1/4 x 1 x 3/4 (16)1-1/4 x 1 x 1 (16)

1-1/4 x 1 x 1-1/4 (16)1-1/4 x 1-1/4 x 1-1/2 (15)

Galvanized Pipe Fittings - Sch. 40

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 79: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 79

1 2

3

Part No. GP101-HGP101-HDGP101-HEGP101-HEEGP101-HEFGP101-HEGGP101-HEHGP101-HFGP101-HFEGP101-HFFGP101-HFGGP101-HFHGP101-HGGP101-HGFGP101-HGGGP101-HGHGP101-HIGP101-IGP101-IDGP101-IDIGP101-IEGP101-IFGP101-IFFGP101-IFGGP101-IFHGP101-IGGP101-IGGGP101-IGHGP101-IHGP101-IHHGP101-JGP101-JFGP101-KGP101-L

Galvanized Pipe Fittings - Sch. 40 Galvanized Pipe Fittings - Sch. 40

Galvanized Tee - FPT x FPT x FPT (Continued)Part No. GP102-AGP102-BGP102-CGP102-DGP102-EGP102-FGP102-GGP102-HGP102-IGP102-JGP102-KGP102-L

Galvanized Cross - FPT x FPT x FPT x FPT

Part No. GP103-AGP103-BGP103-CGP103-DGP103-EGP103-FGP103-GGP103-HGP103-IGP103-JGP103-KGP103-L

Galvanized Coupling - FPT x FPT

Part No. GP104-AGP104-BGP104-CGP104-DGP104-EGP104-FGP104-GGP104-HGP104-IGP104-JGP104-KGP104-L

Galvanized Union (Brass to Iron Seat) - FPT x FPT

Size (Box Qty)1-1/2 (15)

1-1/2 x 1-1/2 x 1/2 (15)1-1/2 x 1-1/2 x 3/4 (15)1-1/2 x 3/4 x 3/4 (15)1-1/2 x 3/4 x 1 (15)

1-1/2 x 3/4 x 1-1/4 (15)1-1/2 x 3/4 x 1-1/2 (15)1-1/2 x 1-1/2 x 1 (15)1-1/2 x 1 x 3/4 (15)1-1/2 x 1 x 1 (15)

1-1/2 x 1 x 1-1/4 (15)1-1/2 x 1 x 1-1/2 (15)

1-1/2 x 1-1/2 x 1-1/4 (15)1-1/2 x 1-1/4 x 1 (15)

1-1/2 x 1-1/4 x 1-1/4 (15)1-1/2 x 1-1/4 x 1-1/2 (15)

1-1/2 x 1-1/2 x 2 (8)2 (10)

2 x 2 x 1/2 (8)2 x 1/2 x 2 (8)2 x 2 x 3/4 (8)

2 x 2 x 12 x 1 x 1 (8)

2 x 1 x 1-1/4 (8)2 x 1 x 1-1/2 (8)2 x 2 x 1-1/4 (8)

2 x 1-1/4 x 1-1/4 (8)2 x 1-1/4 x 1-1/2 (8)

2 x 2 x 1-1/2 (8)2 x 1-1/2 x 1-1/2 (8)

2-1/2 (8)2-1/2 x 2-1/2 x 1 (8)

3 (6)4 (6)

Size (Box Qty)1/8 (30)1/4 (40)3/8 (25)1/2 (30)3/4 (20)1 (15)

1-1/4 (20)1-1/2 (18)

2 (10)2-1/2 (12)

3 (8)4 (4)

Size (Box Qty)1/8 (70)1/4 (40)3/8 (50)1/2 (40)3/4 (50)1 (25)

1-1/4 (16)1-1/2 (18)

2 (12)2-1/2 (8)

3 (8)4 (7)

Size (Box Qty)1/8 (30)1/4 (20)3/8 (20)1/2 (50)3/4 (35)1 (20)

1-1/4 (15)1-1/2 (10)

2 (6)2-1/2 (8)

3 (7)4 (7)

Please Note:Galvanized pricing based on box qty. stated in brackets

Page 80: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 80

Galvanized Pipe Fittings - Sch. 40Galvanized Pipe Fittings - Sch. 40

Part No. GP108-AGP108-BGP108-CGP108-DGP108-EGP108-FGP108-GGP108-HGP108-IGP108-JGP108-KGP108-L

Part No. GP109-AGP109-BGP109-CGP109-DGP109-EGP109-FGP109-GGP109-HGP109-IGP109-JGP109-KGP109-L

Part No. GP105-AGP105-BGP105-CGP105-DGP105-EGP105-FGP105-GGP105-HGP105-IGP105-JGP105-KGP105-L

Galvanized Elbow 45° - FPT x FPT

Galvanized Cap - FPT x FPT

Galvanized Square Head Plug - MPT

Part No. GP110-BAGP110-CAGP110-CBGP110-DAGP110-DBGP110-DCGP110-EAGP110-EBGP110-ECGP110-EDGP110-FAGP110-FBGP110-FCGP110-FDGP110-FEGP110-GBGP110-GCGP110-GDGP110-GEGP110-GFGP110-HBGP110-HCGP110-HDGP110-HEGP110-HFGP110-HGGP110-ICGP110-IDGP110-IEGP110-IFGP110-IGGP110-IHGP110-JFGP110-JGGP110-JIGP110-KFGP110-KGGP110-KHGP110-KIGP110-KJGP110-LFGP110-LGGP110-LHGP110-LIGP110-LJGP110-LK

Galvanized Bushing - MPT x FPTSize (Box Qty)

1/8 (50)1/4 (30)3/8 (30)1/2 (50)3/4 (40)1 (20)

1-1/4 (20)1-1/2 (10)

2 (12)2-1/2 (9)

3 (10)4 (6)

Size (Box Qty)1/8 (120)1/4 (80)3/8 (60)1/2 (75)3/4 (40)1 (35)

1-1/4 (25)1-1/2 (25)

2 (18)2-1/2 (28)

3 (21)4 (7)

Size (Box Qty)1/8 (300)1/4 (150)3/8 (100)1/2 (50)3/4 (30)1 (20)

1-1/4 (40)1-1/2 (30)

2 (20)2-1/2 (16)

3 (16)4 (8)

Size (Box Qty)1/4 x 1/8 (120)3/8 x 1/8 (75)3/8 x 1/4 (75)1/2 x 1/8 (100) 1/2 x 1/4 (100)1/2 x 3/8 (100)3/4 x 1/8 (50)3/4 x 1/4 (50)3/4 x 3/8 (50)3/4 x 1/2 (50)1 x 1/8 (50)1 x 1/4 (50)1 x 3/8 (50)1 x 1/2 (50)1 x 3/4 (50)

1-1/4 x 1/4 (30)1-1/4 x 3/8 (30)1-1/4 x 1/2 (30)1-1/4 x 3/4 (30)1-1/4 x 1 (30)

1-1/2 x 1/4 (25)1-1/2 x 3/8 (25)1-1/2 x 1/2 (25)1-1/2 x 3/4 (25)1-1/2 x 1 (25)

1-1/2 x 1-1/4 (25)2 x 3/8 (20)2 x 1/2 (20)2 x 3/4 (20)2 x 1 (20)

2 x 1-1/4 (20)2 x 1-1/2 (20)2-1/2 x 1 (15)

2-1/2 x 1-1/4 (15)2-1/2 x 2 (15)

3 x 1 (12)3 x 1-1/4 (12)3 x 1-1/2 (12)

3 x 2 (12)3 x 2-1/2 (12)

4 x 1 (5)4 x 1-1/4 (5)4 x 1-1/2 (5)

4 x 2 (5)4 x 2-1/2 (5)

4 x 3 (5 )

Page 81: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 81

Part No. GP111-DGP111-EGP111-FGP111-GGP111-HGP111-I

Galvanized Lock Nut - FPS

Galvanized Pipe Fittings - Sch. 40 Galvanized Pipe Fittings - Sch. 40

Part No. GP116-AGP116-BGP116-CGP116-DGP116-EGP116-FGP116-GGP116-HGP116-IGP116-JGP116-KGP116-L

Part No. GP118-AGP118-BGP118-CGP118-DGP118-EGP118-FGP118-GGP118-HGP118-I

Galvanized Street Elbow 90° - FPT x MPT

Galvanized Countersunk Hex/Square Plug - MPT

Part No. GP119-BAGP119-CAGP119-CBGP119-DAGP119-DBGP119-DCGP119-EAGP119-EBGP119-ECGP119-EDGP119-FBGP119-FCGP119-FDGP119-FEGP119-GCGP119-GDGP119-GEGP119-GFGP119-HDGP119-HEGP119-HFGP119-HGGP119-IDGP119-IEGP119-IFGP119-IGGP119-IHGP119-JFGP119-JGGP119-JHGP119-JIGP119-KFGP119-KGGP119-KHGP119-KIGP119-KJGP119-LHGP119-LIGP119-LJGP119-LK

Galvanized Reducing Coupling - FPT x FPTSize (Box Qty)1/4 x 1/8 (50)3/8 x 1/8 (30)3/8 x 1/4 (30)1/2 x 1/8 (40)1/2 x 1/4 (40)1/2 x 3/8 (40)3/4 x 1/8 (60)3/4 x 1/4 (60)3/4 x 3/8 (60)3/4 x 1/2 (60)1 x 1/4 (25)1 x 3/8 (25)1 x 1/2 (25)1 x 3/4 (25)

1-1/4 x 3/8 (15)1-1/4 x 1/2 (15)1-1/4 x 3/4 (15)1-1/4 x 1 (15)

1-1/2 x 1/2 (12)1-1/2 x 3/4 (12)1-1/2 x 1 (12)

1-1/2 x 1-1/4 (12)2 x 1/2 (12)2 x 3/4 (12)2 x 1 (12)

2 x 1-1/4 (12)2 x 1-1/2 (12)2-1/2 x 1 (10)

2-1/2 x 1-1/4 (10)2-1/2 x 1-1/2 (10)

2-1/2 x 2 (10)3 x 1 (12)

3 x 1-1/4 (12)3 x 1-1/2 (12)

3 x 2 (12)3 x 2-1/2 (12)4 x 1-1/2 (6)

4 x 2 (6)4 x 2-1/2 (6)

4 x 3 (6)

Size (Box Qty)1/8 (100)1/4 (100)3/8 (100)1/2 (100)3/4 (50)1 (50)

1-1/4 (50)1-1/2 (25)

2 (20)

Size (Box Qty)1/2 (100)3/4 (60)1 (40)

1-1/4 (30)1-1/2 (45)

2 (25)

Size (Box Qty)1/8 (60)1/4 (35)3/8 (40)1/2 (60)3/4 (35)1 (30)

1-1/4 (25)1-1/2 (9)

2 (10)2-1/2 (9)

3 (7)4 (6)

Please Note:Galvanized pricing based on box qty. stated in brackets

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 82: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 82

Part No. GP124-AGP124-BGP124-CGP124-DGP124-EGP124-FGP124-GGP124-HGP124-I

Galvanized Street Elbow 45° - FPT x MPT

Part No. GPF-DGPF-EGPF-FGPF-GGPF-HGPF-I

Galvanized Floor Flange - FPT

Galvanized Pipe Fittings - Sch. 40

Galvanized Steel Pipe Nipples - Sch. 40

Part No. GP112-AGP112-BGP112-CGP112-DGP112-EGP112-FGP112-GGP112-HGP112-IGP112-JGP112-KGP112-L

Galvanized Close Nipple - MPT x MPT

Galvanized Steel Pipe Nipples - Sch. 40

Part No. GP113-A11/2GP113-A2GP113-A21/2GP113-A3GP113-A31/2GP113-A4GP113-A41/2GP113-A5GP113-A51/2GP113-A6GP113-A7GP113-A8GP113-A9GP113-A10GP113-A11GP113-A12

GP113-B11/2GP113-B2GP113-B21/2GP113-B3GP113-B31/2GP113-B4GP113-B41/2GP113-B5GP113-B51/2GP113-B6GP113-B7GP113-B8GP113-B9GP113-B10GP113-B11GP113-B12

GP113-C11/2GP113-C2GP113-C21/2GP113-C3GP113-C31/2GP113-C4GP113-C41/2GP113-C5GP113-C51/2GP113-C6GP113-C7GP113-C8GP113-C9GP113-C10GP113-C11GP113-C12

Galvanized Pipe Nipple - MPT x MPTSize x Length (Box Qty)

1/8 x 1-1/2 (25)1/8 x 2 (25)

1/8 x 2-1/2 (25)1/8 x 3 (25)

1/8 x 3-1/2 (25)1/8 x 4 (25)

1/8 x 4-1/2 (25)1/8 x 5 (25)

1/8 x 5-1/2 (25)1/8 x 6 (25)1/8 x 7 (10)1/8 x 8 (10)1/8 x 9 (10)1/8 x 10 (10)1/8 x 11 (10)1/8 x 12 (10)

1/4 x 1-1/2 (25)1/4 x 2 (25)

1/4 x 2-1/2 (25)1/4 x 3 (25)

1/4 x 3-1/2 (25)1/4 x 4 (25)

1/4 x 4-1/2 (25)1/4 x 5 (25)

1/4 x 5-1/2 (25)1/4 x 6 (25)1/4 x 7 (10)1/4 x 8 (10)1/4 x 9 (10)1/4 x 10 (10)1/4 x 11 (10)1/4 x 12 (10)

3/8 x 1-1/2 (25)3/8 x 2 (25)

3/8 x 2-1/2 (25)3/8 x 3 (25)

3/8 x 3-1/2 (25)3/8 x 4 (25)

3/8 x 4-1/2 (25)3/8 x 5 (25)

3/8 x 5-1/2 (25)3/8 x 6 (25)3/8 x 7 (10)3/8 x 8 (10)3/8 x 9 (10)3/8 x 10 (10)3/8 x 11 (10)3/8 x 12 (10)

Size x Length (Box Qty)1/8 x 3/4 (25)1/4 x 7/8 (25)3/8 x 1 (25)

1/2 x 1-1/8 (25)3/4 x 1-3/8 (25)1 x 1-1/2 (25)

1-1/4 x 1-5/8 (25)1-1/2 x 1-3/4 (25)

2 x 2 (25)2-1/2 x 2-1/2 (25)

3 x 2-5/8 (25)4 x 2-7/8 (25)

Size (Box Qty)1/8 (70)1/4 (40)3/8 (50)1/2 (75)3/4 (40)1 (25)

1-1/4 (10)1-1/2 (10)

2 (12)

Size (Box Qty)1/2 (25)3/4 (20)1 (20)

1-1/4 (15)1-1/2 (12)

2 (8)

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 83: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 83

Part No.GP113-G2GP113-G21/2GP113-G3GP113-G31/2GP113-G4GP113-G41/2GP113-G5GP113-G51/2GP113-G6GP113-G7GP113-G8GP113-G9GP113-G10GP113-G11GP113-G12

GP113-H2GP113-H21/2GP113-H3GP113-H31/2GP113-H4GP113-H41/2GP113-H5GP113-H51/2GP113-H6GP113-H7GP113-H8GP113-H9GP113-H10GP113-H11GP113-H12

GP113-I21/2GP113-I3GP113-I31/2GP113-I4GP113-I41/2GP113-I5GP113-I51/2GP113-I6GP113-I7GP113-I8GP113-I9GP113-I10GP113-I11GP113-I12

Galvanized Pipe Nipple - MPT x MPT (Continued)

Part No.GP113-D11/2GP113-D2GP113-D21/2GP113-D3GP113-D31/2GP113-D4GP113-D41/2GP113-D5GP113-D51/2GP113-D6GP113-D7GP113-D8GP113-D9GP113-D10GP113-D11GP113-D12

GP113-E11/2GP113-E2GP113-E21/2GP113-E3GP113-E31/2GP113-E4GP113-E41/2GP113-E5GP113-E51/2GP113-E6GP113-E7GP113-E8GP113-E9GP113-E10GP113-E11GP113-E12

GP113-F2GP113-F21/2GP113-F3GP113-F31/2GP113-F4GP113-F41/2GP113-F5GP113-F51/2GP113-F6GP113-F7GP113-F8GP113-F9GP113-F10GP113-F11GP113-F12

Galvanized Pipe Nipple - MPT x MPT (Continued)

Galvanized Steel Pipe Nipples - Sch. 40Galvanized Steel Pipe Nipples - Sch. 40

Size x Length (Box Qty)1/2 x 1-1/2 (25)

1/2 x 2 (25)1/2 x 2-1/2 (25)

1/2 x 3 (25)1/2 x 3-1/2 (25)

1/2 x 4 (25)1/2 x 4-1/2 (25)

1/2 x 5 (25)1/2 x 5-1/2 (25)

1/2 x 6 (25)1/2 x 7 (10)1/2 x 8 (10)1/2 x 9 (10)1/2 x 10 (10)1/2 x 11 (10)1/2 x 12 (10)

3/4 x 1-1/2 (25)

3/4 x 2 (25)3/4 x 2-1/2 (25)

3/4 x 3 (25)3/4 x 3-1/2 (25)

3/4 x 4 (25)3/4 x 4-1/2 (25)

3/4 x 5 (25)3/4 x 5-1/2 (25)

3/4 x 6 (25)3/4 x 7 (10)3/4 x 8 (10)3/4 x 9 (10)3/4 x 10 (10)3/4 x 11 (10)3/4 x 12 (10)

1 x 2 (25)1 x 2-1/2 (25)

1 x 3 (25)1 x 3-1/2 (25)

1 x 4 (25)1 x 4-1/2 (25)

1 x 5 (25)1 x 5-1/2 (25)

1 x 6 (25)1 x 7 (10)1 x 8 (10)1 x 9 (10)1 x 10 (10)1 x 11 (10)1 x 12 (10)

Size x Length (Box Qty)1-1/4 x 2 (25)

1-1/4 x 2-1/2 (25)1-1/4 x 3 (25)

1-1/4 x 3-1/2 (25)1-1/4 x 4 (25)

1-1/4 x 4-1/2 (25)1-1/4 x 5 (25)

1-1/4 x 5-1/2 (25)1-1/4 x 6 (25)1-1/4 x 7 (10)1-1/4 x 8 (10)1-1/4 x 9 (10)1-1/4 x 10 (10)1-1/4 x 11 (10)1-1/4 x 12 (10)

1-1/2 x 2 (25)1-1/2 x 2-1/2 (25)

1-1/2 x 3 (25)1-1/2 x 3-1/2 (25)

1-1/2 x 4 (25)1-1/2 x 4-1/2 (25)

1-1/2 x 5 (25)1-1/2 x 5-1/2 (25)

1-1/2 x 6 (25)1-1/2 x 7 (10)1-1/2 x 8 (10)1-1/2 x 9 (10)1-1/2 x 10 (10)1-1/2 x 11 (10)1-1/2 x 12 (10)

2 x 2-1/2 (25)2 x 3 (25)

2 x 3-1/2 (25)2 x 4 (25)

2 x 4-1/2 (25)2 x 5 (25)

2 x 5-1/2 (25)2 x 6 (25)2 x 7 (10)2 x 8 (10)2 x 9 (10)2 x 10 (10)2 x 11 (10)2 x 12 (10)

Please Note:Galvanized pricing based on box qty. stated in brackets

Page 84: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 84

Part No.GP113-J3GP113-J31/2GP113-J4GP113-J41/2GP113-J5GP113-J51/2GP113-J6GP113-J7GP113-J8GP113-J9GP113-J10GP113-J11GP113-J12

GP113-K3GP113-K31/2GP113-K4GP113-K41/2GP113-K5GP113-K51/2GP113-K6GP113-K7GP113-K8GP113-K9GP113-K10GP113-K11GP113-K12

GP113-L4GP113-L41/2GP113-L5GP113-L51/2GP113-L6GP113-L7GP113-L8GP113-L9GP113-L10GP113-L11GP113-L12

Galvanized Pipe Nipple - MPT x MPT (Continued)

Galvanized Steel Pipe Nipples - Sch. 40

Part No.ntf-1/2

NTf-3/4

NTf-1

Full NippleTrays

Part No.nt-1/2

NT-3/4

NT-1

Empty NippleTrays

Nipple Trays

DescriptionSlots for 7 pcs. of each 1/2"

nipple, ranging from: 1-1/2" (2 row-14 pcs.) to 6" long in 1/2"

increments

Slots for 6 pcs. of each 3/4" nipple, ranging from: 1-1/2" (2 rows-12 pcs.) to 6" long in 1/2"

increments

Slots for 5 pcs. of each 1" nip-ple, ranging from:

2" (2 rows-10 pcs.) to 6" long in 1/2" increments

DescriptionComplete with 7 pcs. of each

1/2" nipple, ranging from:1-1/2" (2 rows-14 pcs.) to 6"

long in 1/2" increments

Complete with 6 pcs. of each 3/4" nipple, ranging from:

1-1/2" (2 rows-12 pcs.) to 6" long in 1/2" increments

Complete with 5 pcs. of each 1" nipple, ranging from:

2" (2 rows-10 pcs.) to 6" long in 1/2" increments

Size x Length (Box Qty)2-1/2 x 3 (25)

2-1/2 x 3-1/2 (25)2-1/2 x 4 (25)

2-1/2 x 4-1/2 (25)2-1/2 x 5 (25)

2-1/2 x 5-1/2 (25)2-1/2 x 6 (25)2-1/2 x 7 (10)2-1/2 x 8 (10)2-1/2 x 9 (10)2-1/2 x 10 (10)2-1/2 x 11 (10)2-1/2 x 12 (10)

3 x 3 (25)3 x 3-1/2 (25)

3 x 4 (25)3 x 4-1/2 (25)

3 x 5 (25)3 x 5-1/2 (25)

3 x 6 (25)3 x 7 (10)3 x 8 (10)3 x 9 (10)3 x 10 (10)3 x 11 (10)3 x 12 (10)

4 x 4 (25)4 x 4-1/2 (25)

4 x 5 (25)4 x 5-1/2 (25)

4 x 6 (25)4 x 7 (10)4 x 8 (10)4 x 9 (10)4 x 10 (10)4 x 11 (10)4 x 12 (10)

Please Note:Galvanized pricing based on box qty. stated in brackets

Malleable Pipe Fittings Repair Kit

Malleable “QWIK FIX” KitPart No.KIT-MP-1

DescriptionAssorted Malleable

Pipe Fittings

Page 85: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 85

Part No.PSGP68-6CPSGP68-6DPSGP68-8DPSGP68-12EPSGP68-16FPSGP68-20G

Corrugated Stainless Steel Gas Pipe Fittings

* Size x MPT3/8 x 3/83/8 x 1/21/2 x 1/23/4 x 3/4

1 x 11-1/4 x 1-1/4

Part No.PSGP62-6PSGP62-8PSGP62-12PSGP62-16

* Size3/81/23/41

* Size x FPT3/8 x 3/81/2 x 1/23/4 x 3/4

1 x 1

Part No.PSGP66-6CPSGP66-8DPSGP66-12EPSGP66-16F

Part No.PSGP64-8PSGP64-12-8-8PSGP64-12-8PSGP64-12PSGP64-16-8

* Size1/2

3/4 x 1/2 x 1/23/4 x 3/4 x 1/2

3/41 x 1 x 1/2

Union - Pipe x Pipe

Union Tee - Pipe x Pipe x Pipe

Female Adaptor - Pipe x FPT

Male Adaptor - Pipe x MPT

Yellow Jacketed Corrugated Stainless Steel Gas Pipe

* Size is the nominal dimension of the pipe and not the outside diameter

Corrugated Stainless Steel Gas Pipe Corrugated Stainless Steel Gas Pipe Fittings

Part No.PSGP-6X25PSGP-6X50PSGP-6X75PSGP-8X25PSGP-8X50PSGP-8X75PSGP-8X150PSGP-8X225PSGP-12X25PSGP-12X50PSGP-12X75PSGP-12X150PSGP-12X225PSGP-16X25PSGP-16X50PSGP-16X75PSGP-16X150PSGP-20X25PSGP-20X50PSGP-20X75PSGP-20X150

* Size x Length3/8 x 25 Ft.3/8 x 50 Ft.3/8 x 75 Ft.1/2 x 25 Ft.1/2 x 50 Ft.1/2 x 75 Ft.1/2 x 150 Ft.

1/2 x 225 Ft. Spool3/4 x 25 Ft.3/4 x 50 Ft.3/4 x 75 Ft.

3/4 x 150 Ft. Spool3/4 x 225 Ft. Spool

1 x 25 Ft.1 x 50 Ft.1 x 75 Ft.

1 x 150 Ft. Spool1-1/4 x 25 Ft.1-1/4 x 50 Ft.1-1/4 x 75 Ft.

1-1/4 x 150 Ft. Spool

Termination Plate With Fitting - Pipe x MPTPart No.PSGP68TP-8DPSGP68TP-12EPSGP68TP-16F

* Size x MPT1/2 x 1/23/4 x 3/4

1 x 1

Part No.PSGP78-8DPSGP78-128DPSGP78-12DPSGP78-12EPSGP78-16D

* Size x FPT1/2 x 1/2 x 1/23/4 x 1/2 x 1/23/4 x 3/4 x 1/23/4 x 3/4 x 3/4

1 x 1 x 1/2

Female Branch Tee - Pipe x Pipe x FPT

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 86: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 86

Part No.PSGPMAN-DDPSGPMAN-ED PSGPMAN-FDPSGPMAN-FE

Cast Manifolds, Epoxy Coated - All FPT Inlets/OutletsInlet - Oulets - Inlet 1/2 - (4 x 1/2 - 1/23/4 - (4 x 1/2 - 3/41 x (2 x 1/2) x 11 x ( 2 x 3/4) x 1

UL 467 Listed Bonding Clamp For FittingPart No.PSGPBC-DCPSGPBC-GFE

Fitting Size3/8 & 1/2

3/4, 1 & 1-1/4

Part No.PSGPTP-CPSGPTP-DPSGPTP-EPSGPTP-FPSGPTP-G

Threaded Termination Plate* Size

3/81/23/41

1-1/4

Part No.PSGPSP-3X2PSGPSP-3X7PSGPSP-3X12PSGPSP-6X17

Size3 x 23 x 73 x 126 x 17

Striker Plates, Steel Protective Shielding

Corrugated Stainless Steel Gas Pipe Accessories

* Size is the nominal dimension of the pipe and not the outside diameter

Floppy-Flex™ Galvanized Protective Armour/ConduitPart No.PSGPFF-6PSGPFF-8PSGPFF-12PSGPFF-16

PSGPFF-8X12PSGPFF-12X12PSGPFF-16X12

Size x Length3/4 (For 3/8) x 50 Ft.1 (For 1/2) x 50 Ft.

1-1/4 (For 3/4) x 25 Ft.1-1/2 (For 1) x 25 Ft.

1 (For 1/2) x 12 Inch.1-1/4 (For 3/4) x 12 Inch1-1/2 (For 1) x 12 Inch.

Part No.PSGPAPP-6PSGPAPP-8PSGPAPP-12PSGPAPP-16PSGPAPP-20

* Size3/81/23/41

1-1/4

Accessory Parts Pack(4 Retainer Rings, 2 Slide Rings, 2 Silicone O-Rings,

2 High-Temperature Sealing Gaskets)

Part No.PSGPRRP-6PSGPRRP-8PSGPRRP-12PSGPRRP-16PSGPRRP-20

Part No.PSGPORP-6PSGPORP-8PSGPORP-12PSGPORP-16PSGPORP-20

Part No.PSGPSRP-6PSGPSRP-8PSGPSRP-12PSGPSRP-16PSGPSRP-20

Part No.PSGPHTGP-6PSGPHTGP-8PSGPHTGP-12PSGPHTGP-16PSGPHTGP-20

O-Ring Parts Pack(12 Silicone O-Rings Per Pack)

* Size3/81/23/41

1-1/4

Retainer Ring Parts Pack(12 Retainer (Spreadable) Rings Per Pack)

* Size3/81/23/41

1-1/4

Slide Ring Parts Pack(12 Slide (Solid) Rings Per Pack)

* Size3/81/23/41

1-1/4

O-Ring Parts Pack(12 High Temp GasketS Per Pack)

* Size3/81/23/41

1-1/4

Corrugated Stainless Steel Gas Pipe Accessories

Page 87: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 87

Underground Piping Products

Yellow Gas Pipe - Medium Density PolyethylenePart No.MGCPE-10X125

MGCPE-10X250

MGCPE-10X500

MGCPE-EX150

MGCPE-EX250

MGCPE-EX500

MGCPE-FX150

MGCPE-FX250

MGCPE-FX500

MGCPE-GX150

MGCPE-GX250

MGCPE-GX500

Size x Length1/2 CTS (5/8 OD) SDR 7

x 125 Ft. Roll1/2 CTS (5/8 OD) SDR 7

x 250 Ft. Roll1/2 CTS (5/8 OD) SDR 7

x 500 Ft. Roll

3/4 IPS SDR 11x 150 Ft. Roll

3/4 IPS SDR 11x 250 Ft. Roll

3/4 IPS SDR 11x 500 Ft. Roll

1 IPS SDR 11x 150 Ft. Roll1 IPS SDR 11x 250 Ft. Roll1 IPS SDR 11x 500 Ft. Roll

1-1/4 IPS SDR 10x 150 Ft. Roll

1-1/4 IPS SDR 10x 250 Ft. Roll

1-1/4 IPS SDR 10x 500 Ft. Roll

Part No.MGC50100

MGC50030MGC50601MGC50035010

Permasert ® Mechanical Repair Coupling* Size

1/2 CTS

3/4 IPS1 IPS

1-1/4 IPS SDR 10

Box Contents:25Ft. - 1/2 Corrugated Stainless Steel Pipe2 Pcs. - 1/2 Male Fittings1 Pc. - 1/2 Termination Plate1 Roll - Yellow Tefl on Tape1 Bottle - Leak Detector1 Pc. - 1/2 Flare x 3/8 MPT Fitting1 Pc. - 1/2 MPT x 1/2 FPT Ball Valve Connector 24" Long1 - Installation/Training Guide

Part No.PSGPKITX25

Description1/2 x 25Ft. Kit

Corrugated Stainless Steel Gas Pipe Kit

Single Appliance Gas Installation Kit - 25Ft.

Natural Gas & Propane Outlet Box/Kit

Stainless Steel Box c/w Valved Gas Connection

White PVC Box c/w Valved Gas Connection

- Safety is it's main feature- Easy installation and attractive housing- Low pressure gas connection- Stainless steel or PVC surface mount box- CSA / Can-US approved indoor / outdoor- 75 Mbtu NG / 118 Mbtu LP- Rear or bottom connection- 1/2" NPT pipe connection- Dimensions: 7 x 5-1/4 x 2-3/8 (Stainless) 6 x 4-1/2 x 2-1/2 (PVC)- Temperature Rating: Approved to - 40 ° C- 3/8 Quick disconnect plug included

Part No.G0101-5W-50

G0101-SS-50

DescriptionWhite PVC Box

Stainless Steel Box

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 88: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 88

Underground Piping Products

Part No.MGC51005

MGC51008MGC51028

Champhering ToolSize

1/2 CTS - 1 CTS

3/4 IPS & 1 IPS1-1/4 IPS

Part No.MGC55225

Tube CutterSize

1/8 - 1-1/4

Part No.MGCTW14-500MGCTW14-1000

Tracer Wire - Copper 14 Gauge Yellow HDPE CoatedSize

500 Ft.1000 Ft.

Part No.MGC50199

MGC50929MGC50634MGC50327010

Permasert ® Mechanical TeeSize

1/2 CTS SDR .090

3/4 IPS1 IPS

1-1/4 IPS

Underground Piping Products

Part No.MGC77181

MGC79209

MGC79408

MGC75901

Anodeless Riser with Permasert® CouplingSize & Vert x Horiz3/4 IPS x 1/2 CTS

30" x 24"3/4 IPS x 3/4 IPS

30" x 25"1 IPS x 1 IPS

30" x 25"1-1/4 IPS x 1-1/4 IPS

30" x 24"

Part No.MGC71354

MGC71353

MGC71410

MGC71412

MGC71706

All-Flex Servi-Sert ® Field Assembled RiserSize & Length

1/2 IPS x 1/2 CTS36"

1/2 IPS x 1/2 CTS84"

3/4 IPS x 3/4 IPS36"

3/4 IPS x 3/4 IPS84"

1-1/4 IPS x 1 IPS36"

Part No.MGC74500

Wall Mounting BracketDescription

6" for 3/4-2IPS

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 89: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 89

Reducer - FJIC x MJICTubePart Number

S35-46 1/4 x 3/8 2406-04-06S35-54 5/16 x 1/4 2406-05-04S35-64 3/8 x 1/4 2406-06-04S35-65 3/8 x 5/16 2406-06-05S35-68 3/8 x 1/2 2406-06-08S35-84 1/2 x 1/4 2406-08-04S35-86 1/2 x 3/8 2406-08-06S35-810 1/2 x 5/8 2406-08-10S35-812 1/2 x 3/4 2406-08-12S35-104 5/8 x 1/4 2406-10-04S35-106 5/8 x 3/8 2406-10-06S35-108 5/8 x 1/2 2406-10-08S35-1012 5/8 x 3/4 2406-10-12S35-124 3/4 x 1/4 2406-12-04S35-126 3/4 x 3/8 2406-12-06S35-128 3/4 x 1/2 2406-12-08S35-1210 3/4 x 5/8 2406-12-10S35-1216 3/4 x 1 2406-12-16S35-1412 7/8 x 3/4 2406-14-12S35-164 1 x 1/4 2406-16-04S35-166 1 x 3/8 2406-16-06S35-168 1 x 1/2 2406-16-08S35-1610 1 x 5/8 2406-16-10S35-1612 1 x 3/4 2406-16-12S35-1614 1 x 7/8 2406-16-14S35-1620 1 x 1-1/4 2406-16-20 S35-208 1-1/4 x 1/2 2406-20-08S35-2012 1-1/4 x 3/4 2406-20-12S35-2016 1-1/4 x 1 2406-20-16S35-2024 1-1/4 x 1-1/2 2406-20-24S35-2412 1-1/2 x 3/4 2406-24-12S35-2416 1-1/2 x 1 2406-24-16S35-2420 1-1/2 x 1-1/4 2406-24-20S35-2432 1-1/2 x 2 2406-24-32S35-3224 2 x 1-1/2 2406-32-24

Style Number

TubePart Number Style NumberSBHLN-4 1/4 0306-04SBHLN-5 5/16 0306-05SBHLN-6 3/8 0306-06SBHLN-8 1/2 0306-08SBHLN-10 5/8 0306-10SBHLN-12 3/4 0306-12SBHLN-16 1 0306-16SBHLN-20 1-1/4 0306-20SBHLN-24 1-1/2 0306-24SBHLN-32 2 0306-32

Steel 37° J.I.C. Flare Adaptors

Bulkhead Locknut

Page 90: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 90

Female Run Tee - MJIC x FPT x MJIC

Nut (For “Sleeve”)

Tube PipePart Number Style NumberFemale Branch Tee - MJIC x MJIC x FPT

S40N-4 1/4 0318-04S40N-5 5/16 0318-05S40N-6 3/8 0318-06S40N-8 1/2 0318-08S40N-10 5/8 0318-10S40N-12 3/4 0318-12S40N-14 7/8 0318-14S40N-16 1 0318-16S40N-20 1-1/4 0318-20S40N-24 1-1/2 0318-24S40N-32 2 0318-32

S36-4A 1/4 1/8 2602-04-04-02 S36-4B 1/4 1/4 2602-04-04-04 S36-5A 5/16 1/8 2602-05-05-02S36-6B 3/8 1/4 2602-06-06-04 S36-6C 3/8 3/8 2602-06-06-06 S36-8C 1/2 3/8 2602-08-08-06 S36-8D 1/2 1/2 2602-08-08-08 S36-10D 5/8 1/2 2602-10-10-08 S36-12E 3/4 3/4 2602-12-12-12 S36-16F 1 1 2602-16-16-16 S36-20G 1-1/4 1-1/4 2602-20-20-20 S36-24H 1-1/2 1-1/2 2602-24-24-24

S37-4A 1/4 1/8 2606-04-02-04 S37-4B 1/4 1/4 2606-04-04-04 S37-6B 3/8 1/4 2606-06-04-06 S37-6C 3/8 3/8 2606-06-06-06 S37-8C 1/2 3/8 2606-08-06-08 S37-8D 1/2 1/2 2606-08-08-08 S37-10D 5/8 1/2 2606-10-08-10 S37-12E 3/4 3/4 2606-12-12-12 S37-16F 1 1 2606-16-16-16 S37-20G 1-1/4 1-1/4 2606-20-20-20

Tube PipePart Number Style Number

TubePart Number Style Number

Steel 37° J.I.C. Flare Adaptors

Page 91: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 91

Sleeve (For “Nut”)

S40S-4 1/4 0319-04S40S-5 5/16 0319-05S40S-6 3/8 0319-06S40S-8 1/2 0319-08S40S-10 5/8 0319-10S40S-12 3/4 0319-12S40S-14 7/8 0319-14S40S-16 1 0319-16S40S-20 1-1/4 0319-20S40S-24 1-1/2 0319-24S40S-32 2 0319-32

Union - MJIC x MJIC

S42-2 1/8 2403-02-02S42-4 1/4 2403-04-04S42-42 1/4 x 1/8 2403-04-02S42-5 5/16 2403-05-05S42-54 5/16 x 1/4 2403-05-04S42-6 3/8 2403-06-06S42-64 3/8 x 1/4 2403-06-04S42-65 3/8 x 5/16 2403-06-05S42-8 1/2 2403-08-08S42-86 1/2 x 3/8 2403-08-06S42-10 5/8 2403-10-10S42-12 3/4 2403-12-12S42-128 3/4 x 1/2 2403-12-08S42-1210 3/4 x 5/8 2403-12-10S42-14 7/8 2403-14-14S42-16 1 2403-16-16S42-1612 1 x 3/4 2403-16-12S42-20 1-1/4 2403-20-20S42-2016 1-1/4 x 1 2403-20-16S42-24 1-1/2 2403-24-24S42-32 2 2403-32-32

TubePart Number Style Number

TubePart Number Style Number

Steel 37° J.I.C. Flare Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 92: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 92

Union Tee - MJIC x MJIC x MJIC

Large Hex Union - MJIC x MJIC

S42LH-4 1/4 2403LH-04-04S42LH-6 3/8 2403LH-06-06S42LH-8 1/2 2403LH-08-08S42LH-10 5/8 2403LH-10-10S42LH-12 3/4 2403LH-12-12S42LH-16 1 2403LH-16-16S42LH-20 1-1/4 2403LH-20-20S42LH-24 1-1/2 2403LH-24-24

S44-2 1/8 2603-02-02-02 S44-4 1/4 2603-04-04-04 S44-5 5/16 2603-05-05-05 S44-6 3/8 2603-06-06-06 S44-64 3/8 x 3/8 x 1/4 2603-06-06-04S44-68 3/8 x 3/8 x 1/2 2603-06-06-08 S44-8 1/2 2603-08-08-08 S44-10 5/8 2603-10-10-10 S44-108 5/8 x 5/8 x 1/2 2603-10-10-08S44-12 3/4 2603-12-12-12 S44-16 1 2603-16-16-16 S44-20 1-1/4 2603-20-20-20 S44-24 1-1/2 2603-24-24-24

TubePart Number Style Number

TubePart Number Style Number

Steel 37° J.I.C. Flare Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 93: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 93

Male Branch Tee - MJIC x MJIC x MPT

Female Connector - MJIC x FPT

S46-2A 1/8 1/8 2405-02-02S46-4A 1/4 1/8 2405-04-02S46-4B 1/4 1/4 2405-04-04S46-4C 1/4 3/8 2405-04-06S46-5A 516 1/8 2405-05-02S46-5B 5/16 1/4 2405-05-04S46-6A 3/8 1/8 2405-06-02S46-6B 3/8 1/4 2405-06-04S46-6C 3/8 3/8 2405-06-06S46-8B 1/2 1/4 2405-08-04S46-8C 1/2 3/8 2405-08-06S46-8D 1/2 1/2 2405-08-08S46-8E 1/2 3/4 2405-08-12S46-10C 5/8 3/8 2405-10-06S46-10D 5/8 1/2 2405-10-08S46-12D 3/4 1/2 2405-12-08S46-12E 3/4 3/4 2405-12-12S46-14E 7/8 3/4 2405-14-12S46-16E 1 3/4 2405-16-12S46-16F 1 1 2405-16-16S46-20F 1-1/4 1 2405-20-16S46-20G 1-1/4 1-1/4 2405-20-20S46-24H 1-1/2 1-1/2 2405-24-24S46-32I 2 2 2405-32-32

S45-4A 1/4 1/8 2601-04-04-02 S45-4B 1/4 1/4 2601-04-04-04 S45-4C 1/4 3/8 2601-04-04-06 S45-5A 5/16 1/8 2601-05-05-02 S45-5B 5/16 1/4 2601-05-05-04 S45-6B 3/8 1/4 2601-06-06-04 S45-6C 3/8 3/8 2601-06-06-06 S45-6D 3/8 1/2 2601-06-06-08 S45-8C 1/2 3/8 2601-08-08-06 S45-8D 1/2 1/2 2601-08-08-08 S45-10D 5/8 1/2 2601-10-10-08 S45-12D 3/4 1/2 2601-12-12-08 S45-12E 3/4 3/4 2601-12-12-12 S45-16F 1 1 2601-16-16-16 S45-20G 1-1/4 1-1/4 2601-20-20-20 S45-24H 1-1/2 1-1/2 2601-24-24-24

Tube PipePart Number Style Number

Tube PipePart Number Style Number

Steel 37° J.I.C. Flare Adaptors

Page 94: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 94

Male Connector - MJIC x MPT

S48-2A 1/8 1/8 2404-02-02S48-3A 3/16 1/8 2404-03-02S48-4A 1/4 1/8 2404-04-02S48-4B 1/4 1/4 2404-04-04S48-4C 1/4 3/8 2404-04-06S48-4D 1/4 1/2 2404-04-08S48-5A 516 1/8 2404-05-02S48-5B 5/16 1/4 2404-05-04S48-5C 5/16 3/8 2404-05-06S48-6A 3/8 1/8 2404-06-02S48-6B 3/8 1/4 2404-06-04S48-6C 3/8 3/8 2404-06-06S48-6D 3/8 1/2 2404-06-08S48-6E 3/8 3/4 2404-06-12S48-8B 1/2 1/4 2404-08-04S48-8C 1/2 3/8 2404-08-06S48-8D 1/2 1/2 2404-08-08S48-8E 1/2 3/4 2404-08-12S48-8F 1/2 1 2404-08-16S48-10C 5/8 3/8 2404-10-06S48-10D 5/8 1/2 2404-10-08S48-10E 5/8 3/4 2404-10-12S48-12C 3/4 3/8 2404-12-06S48-12D 3/4 1/2 2404-12-08S48-12E 3/4 3/4 2404-12-12S48-12F 3/4 1 2404-12-16S48-12G 3/4 1-1/4 2404-12-20S48-14E 7/8 3/4 2404-14-12S48-16D 1 1/2 2404-16-08S48-16E 1 3/4 2404-16-12S48-16F 1 1 2404-16-16S48-16G 1 1-1/4 2404-16-20S48-16H 1 1-1/2 2404-16-24S48-20F 1-1/4 1 2404-20-16S48-20G 1-1/4 1-1/4 2404-20-20S48-20H 1-1/4 1-1/2 2404-20-24S48-24F 1-1/2 1 2404-24-16S48-24G 1-1/2 1-1/4 2404-24-20S48-24H 1-1/2 1-1/2 2404-24-24S48-32H 2 1-1/2 2404-32-24S48-32I 2 2 2404-32-32

TubePart Number Style NumberPipe

Steel 37° J.I.C. Flare Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 95: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 95

Male Elbow 90° - MJIC x MPT

Long Male Elbow 90° - MJIC x MPT

TubePart Number Style NumberPipe

TubePart Number Style NumberPipe

S49-2A 1/8 1/8 2501-02-02S49-4A 1/4 1/8 2501-04-02S49-4B 1/4 1/4 2501-04-04 S49-4C 1/4 3/8 2501-04-06 S49-4D 1/4 1/2 2501-04-08 S49-5A 5/16 1/8 2501-05-02 S49-5B 5/16 1/4 2501-05-04 S49-5C 5/16 3/8 2501-05-06 S49-6A 3/8 1/8 2501-06-02 S49-6B 3/8 1/4 2501-06-04 S49-6C 3/8 3/8 2501-06-06 S49-6D 3/8 1/2 2501-06-08 S49-6E 3/8 3/4 2501-06-12 S49-8B 1/2 1/4 2501-08-04 S49-8C 1/2 3/8 2501-08-06 S49-8D 1/2 1/2 2501-08-08 S49-8E 1/2 3/4 2501-08-12 S49-10C 5/8 3/8 2501-10-06 S49-10D 5/8 1/2 2501-10-08 S49-10E 5/8 3/4 2501-10-12 S49-12C 3/4 3/8 2501-12-06 S49-12D 3/4 1/2 2501-12-08 S49-12E 3/4 3/4 2501-12-12 S49-12F 3/4 1 2501-12-16 S49-16E 1 3/4 2501-16-12 S49-16F 1 1 2501-16-16 S49-16G 1 1-1/4 2501-16-20 S49-16H 1 1-1/2 2501-16-24 S49-20F 1-1/4 1 2501-20-16 S49-20G 1-1/4 1-1/4 2501-20-20 S49-20H 1-1/4 1-1/2 2501-20-24 S49-24G 1-1/2 1-1/4 2501-24-20 S49-24H 1-1/2 1-1/2 2501-24-24 S49-32H 2 1-1/2 2501-32-24 S49-32I 2 2 2501-32-32

S49L-4A 1/4 1/8 2501L-04-02 S49L-4B 1/4 1/4 2501L-04-04 S49L-5A 5/16 1/8 2501L-05-02 S49L-6B 3/8 1/4 2501L-06-04 S49L-6C 3/8 3/8 2501L-06-06 S49L-6D 3/8 1/2 2501L-06-08 S49L-8C 1/2 3/8 2501L-08-06 S49L-8D 1/2 1/2 2501L-08-08 S49L-10D 5/8 1/2 2501L-10-08S49L-12E 3/4 3/4 2501L-12-12 S49L-16E 1 3/4 2501L-16-12S49L-16F 1 1 2501L-16-16 S49L-20G 1-1/4 1-1/4 2501L-20-20

Steel 37° J.I.C. Flare Adaptors

Page 96: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 96

Extra Long Male Elbow 90° - MJIC x MPT

Female Elbow 90° - MJIC x FPT

Male Run Tee - MJIC x MPT x MJIC

TubePart Number Style NumberPipe

TubePart Number Style NumberPipe

TubePart Number Style NumberPipe

S49EL-4A 1/4 1/8 2501LL-04-02 S49EL-4B 1/4 1/4 2501LL-04-04 S49EL-5A 5/16 1/8 2501LL-05-02 S49EL-5B 5/16 1/4 2501LL-05-04 S49EL-6B 3/8 1/4 2501LL-06-04 S49EL-6C 3/8 3/8 2501LL-06-06 S49EL-8C 1/2 3/8 2501LL-08-06 S49EL-8D 1/2 1/2 2501LL-08-08 S49EL-10D 5/8 1/2 2501LL-10-08 S49EL-12E 3/4 3/4 2501LL-12-12 S49EL-14E 7/8 3/4 2501LL-14-12S49EL-16F 1 1 2501LL-16-16 S49EL-20G 1-1/4 1-1/4 2501LL-20-20

S50-2A 1/8 1/8 2502-02-02S50-3A 3/16 1/8 2502-03-02 S50-4A 1/4 1/8 2502-04-02 S50-4B 1/4 1/4 2502-04-04 S50-4C 1/4 3/8 2502-04-06 S50-5A 5/16 1/8 2502-05-02 S50-5B 5/16 1/4 2502-05-04 S50-6A 3/8 1/8 2502-06-02 S50-6B 3/8 1/4 2502-06-04 S50-6C 3/8 3/8 2502-06-06 S50-6D 3/8 1/2 2502-06-08 S50-8B 1/2 1/4 2502-08-04 S50-8C 1/2 3/8 2502-08-06 S50-8D 1/2 1/2 2502-08-08 S50-10D 5/8 1/2 2502-10-08 S50-12D 3/4 1/2 2502-12-08 S50-12E 3/4 3/4 2502-12-12 S50-16F 1 1 2502-16-16S50-20G 1-1/4 1-1/4 2502-20-20S50-24H 1-1/2 1-1/2 2502-24-24

S51-4A 1/4 1/8 2605-04-02-04 S51-4B 1/4 1/4 2605-04-04-04 S51-5A 5/16 1/8 2605-05-02-05S51-6B 3/8 1/4 2605-06-04-06 S51-6C 3/8 3/8 2605-06-06-06 S51-8C 1/2 3/8 2605-08-06-08 S51-8D 1/2 1/2 2605-08-08-08 S51-10D 5/8 1/2 2605-10-08-10 S51-12E 3/4 3/4 2605-12-12-12 S51-16F 1 1 2605-16-16-16 S51-20G 1-1/4 1-1/4 2605-20-20-20 S51-24H 1-1/2 1-1/2 2605-24-24-24

Steel 37° J.I.C. Flare Adaptors

Page 97: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 97

Male Elbow 45° - MJIC x MPT

TubePart Number Style Number

TubePart Number Style NumberPipe

S52-4 1/4 2650-04-04-04-04 S52-5 5/16 2650-05-05-05-05 S52-6 3/8 2650-06-06-06-06 S52-8 1/2 2650-08-08-08-08 S52-10 5/8 2650-10-10-10-10S52-12 3/4 2650-12-12-12-12 S52-16 1 2650-16-16-16-16 S52-20 1-1/4 2650-20-20-20-20 S52-24 1-1/2 2650-24-24-24-24

S54-2A 1/8 1/8 2503-02-02S54-3A 3/16 1/8 2503-03-02S54-4A 1/4 1/8 2503-04-02S54-4B 1/4 1/4 2503-04-04S54-4C 1/4 3/8 2503-04-06S54-4D 1/4 1/2 2503-04-08S54-5A 5/16 1/8 2503-05-02S54-5B 5/16 1/4 2503-05-04S54-6A 3/8 1/8 2503-06-02S54-6B 3/8 1/4 2503-06-04S54-6C 3/8 3/8 2503-06-06S54-6D 3/8 1/2 2503-06-08S54-8B 1/2 1/4 2503-08-04S54-8C 1/2 3/8 2503-08-06S54-8D 1/2 1/2 2503-08-08S54-8E 1/2 3/4 2503-08-12 S54-10C 5/8 3/8 2503-10-06 S54-10D 5/8 1/2 2503-10-08 S54-10E 5/8 3/4 2503-10-12 S54-12D 3/4 1/2 2503-12-08 S54-12E 3/4 3/4 2503-12-12 S54-12F 3/4 1 2503-12-16 S54-16D 1 1/2 2503-16-08 S54-16E 1 3/4 2503-16-12 S54-16F 1 1 2503-16-16 S54-16G 1 1-1/4 2503-16-20 S54-20F 1-1/4 1 2503-20-16 S54-20G 1-1/4 1-1/4 2503-20-20 S54-24H 1-1/2 1-1/2 2503-24-24 S54-32I 2 2 2503-32-32

Steel 37° J.I.C. Flare Adaptors

Cross - MJIC x MJIC x MJIC x MJIC

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 98: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 98

Elbow 90° - MJIC x MJIC

Plug - MJIC

TubePart Number Style Number

TubePart Number Style NumberS58-2 1/8 2408-02 S58-3 3/16 2408-03S58-4 1/4 2408-04S58-5 5/16 2408-05S58-6 3/8 2408-06S58-8 1/2 2408-08S58-10 5/8 2408-10S58-12 3/4 2408-12S58-14 7/8 2408-14 S58-16 1 2408-16S58-20 1-1/4 2408-20S58-24 1-1/2 2408-24S58-32 2 2408-32

S55-4 1/4 2500-04-04S55-5 5/16 2500-05-05 S55-6 3/8 2500-06-06 S55-8 1/2 2500-08-08 S55-86 1/2 x 3/8 2500-08-06 S55-10 5/8 2500-10-10 S55-12 3/4 2500-12-12 S55-16 1 2500-16-16 S55-20 1-1/4 2500-20-20 S55-24 1-1/2 2500-24-24

Cap - FJICTubePart Number Style Number

S56-2 1/8 0304C-02S56-3 3/16 0304C-03S56-4 1/4 0304C-04S56-5 5/16 0304C-05S56-6 3/8 0304C-06S56-8 1/2 0304C-08S56-10 5/8 0304C-10S56-12 3/4 0304C-12S56-14 7/8 0304C-14S56-16 1 0304C-16S56-20 1-1/4 0304C-20S56-24 1-1/2 0304C-24S56-32 2 0304C-32

Steel 37° J.I.C. Flare Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 99: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 99

Bulkhead Tee - MJIC x MJIC x MJIC

SBH45-4 1/4 2703LN-04-04-04 SBH45-6 3/8 2703LN-06-06-06 SBH45-8 1/2 2703LN-08-08-08 SBH45-10 5/8 2703LN-10-10-10 SBH45-12 3/4 2703LN-12-12-12 SBH45-16 1 2703LN-16-16-16 SBH45-20 1-1/4 2703LN-20-20-20

TubePart Number Style Number

Female Bulkhead - MJIC x FPT

SBH46-4A 1/4 1/8 2705LN-02-04SBH46-4B 1/4 1/4 2705LN-04-04SBH46-6B 3/8 1/4 2705LN-04-06SBH46-6C 3/8 3/8 2705LN-06-06SBH46-8C 1/2 3/8 2705LN-06-08SBH46-8D 1/2 1/2 2705LN-08-08SBH46-10D 5/8 1/2 2705LN-08-10SBH46-12E 3/4 3/4 2705LN-12-12SBH46-16F 1 1 2705LN-16-16

TubePart Number Style NumberPipe

Male Bulkhead - MJIC x MPT

SBH48-4A 1/4 1/8 2706LN-02-04SBH48-4B 1/4 1/4 2706LN-04-04SBH48-6B 3/8 1/4 2706LN-04-06SBH48-6C 3/8 3/8 2706LN-06-06SBH48-8C 1/2 3/8 2706LN-06-08SBH48-8D 1/2 1/2 2706LN-08-08SBH48-10D 5/8 1/2 2706LN-08-10SBH48-12E 3/4 3/4 2706LN-12-12SBH48-16F 1 1 2706LN-16-16SBH48-20G 1-1/4 1-1/4 2706LN-20-20SBH48-24H 1-1/2 1-1/2 2706LN-24-24

TubePart Number Style NumberPipe

Bulkhead - MJIC x MJIC

SBH42-4 1/4 2700LN-04-04SBH42-5 5/16 2700LN-05-05SBH42-6 3/8 2700LN-06-06SBH42-8 1/2 2700LN-08-08SBH42-10 5/8 2700LN-10-10SBH42-12 3/4 2700LN-12-12SBH42-16 1 2700LN-16-16SBH42-20 1-1/4 2700LN-20-20SBH42-24 1-1/2 2700LN-24-24

TubePart Number Style Number

Steel 37° J.I.C. Flare Adaptors

Page 100: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 100

Bulkhead Elbow 45°- MJIC x MJIC

Swivel Branch Tee - MJIC x MJIC x FJIC

TubePart Number Style NumberSBH54-4 1/4 2702LN-04-04 SBH54-5 5/16 2702LN-05-05 SBH54-6 3/8 2702LN-06-06 SBH54-8 1/2 2702LN-08-08 SBH54-10 5/8 2702LN-10-10 SBH54-12 3/4 2702LN-12-12 SBH54-16 1 2702LN-16-16 SBH54-20 1-1/4 2702LN-20-20

Bulkhead Elbow 90° - MJIC x MJICTubePart Number Style Number

SBH55-4 1/4 2701LN-04-04 SBH55-5 5/16 2701LN-05-05 SBH55-6 3/8 2701LN-06-06 SBH55-8 1/2 2701LN-08-08 SBH55-10 5/8 2701LN-10-10 SBH55-12 3/4 2701LN-12-12 SBH55-16 1 2701LN-16-16 SBH55-20 1-1/4 2701LN-20-20 SBH55-24 1-1/2 2701LN-24-24

TubePart Number Style NumberSW45-4 1/4 1/4 6600-04-04-04 SW45-5 5/16 5/16 6600-05-05-05 SW45-6 3/8 3/8 6600-06-06-06 SW45-8 1/2 1/2 6600-08-08-08 SW45-10 5/8 5/8 6600-10-10-10 SW45-12 3/4 3/4 6600-12-12-12 SW45-16 1 1 6600-16-16-16 SW45-20 1-1/4 1-1/4 6600-20-20-20 SW45-24 1-1/2 1-1/2 6600-24-24-24

Bulkhead Run Tee - MJIC x MJIC x MJICTubePart Number Style Number

SBH51-4 1/4 2704LN-04-04-04 SBH51-6 3/8 2704LN-06-06-06 SBH51-8 1/2 2704LN-08-08-08 SBH51-12 3/4 2704LN-12-12-12 SBH51-16 1 2704LN-16-16-16 SBH51-20 1-1/4 2704LN-20-20-20

Swivel

Steel 37° J.I.C. Flare Adaptors

Steel 37° J.I.C. Swivel Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 101: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 101

Swivel Elbow 90° - FJIC x MJIC

Swivel Male Elbow 90° - FJIC x MPT

Swivel Run Tee - MJIC x FJIC x MJIC

SwivelPart Number Style NumberSW49-3 3/16 3/16 6500-03-03SW49-4 1/4 1/4 6500-04-04 SW49-5 5/16 5/16 6500-05-05 SW49-6 3/8 3/8 6500-06-06SW49-86 1/2 3/8 6500-06-08SW49-8 1/2 1/2 6500-08-08SW49-108 5/8 1/2 6500-08-10 SW49-10 5/8 5/8 6500-10-10 SW49-12 3/4 3/4 6500-12-12 SW49-14 7/8 7/8 6500-14-14 SW49-16 1 1 6500-16-16 SW49-20 1-1/4 1-1/4 6500-20-20 SW49-24 1-1/2 1-1/2 6500-24-24 SW49-32 2 2 6500-32-32

Tube

SW50-4A 1/4 1/8 6501-02-04SW50-4B 1/4 1/4 6501-04-04 SW50-6B 3/8 1/4 6501-04-06 SW50-6C 3/8 3/8 6501-06-06 SW50-6D 3/8 1/2 6501-08-06SW50-8C 1/2 3/8 6501-06-08 SW50-8D 1/2 1/2 6501-08-08 SW50-10D 5/8 1/2 6501-08-10 SW50-12E 3/4 3/4 6501-12-12 SW50-16F 1 1 6501-16-16 SW50-20G 1-1/4 1-1/4 6501-20-20 SW50-24H 1-1/2 1-1/2 6501-24-24SW50-32I 2 2 6501-32-32

PipePart Number Style NumberSwivel

TubePart Number Style NumberSwivelSW51-4 1/4 1/4 6602-04-04-04 SW51-5 5/16 5/16 6602-05-05-05 SW51-6 3/8 3/8 6602-06-06-06 SW51-8 1/2 1/2 6602-08-08-08 SW51-10 5/8 5/8 6602-10-10-10 SW51-12 3/4 3/4 6602-12-12-12 SW51-16 1 1 6602-16-16-16 SW51-20 1-1/4 1-1/4 6602-20-20-20 SW51-24 1-1/2 1-1/2 6602-24-24-24

Steel 37° J.I.C. Swivel Adaptors

Page 102: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 102

Male Pipe Elbow 90° - MPT x MPT

Swivel Elbow 45° - FJIC x MJICSwivelPart Number Style NumberTube

SW54-4 1/4 1/4 6502-04-04 SW54-5 5/16 5/16 6502-05-05 SW54-6 3/8 3/8 6502-06-06 SW54-8 1/2 1/2 6502-08-08 SW54-10 5/8 5/8 6502-10-10 SW54-12 3/4 3/4 6502-12-12 SW54-16 1 1 6502-16-16 SW54-20 1-1/4 1-1/4 6502-20-20 SW54-24 1-1/2 1-1/2 6502-24-24 SW54-32 2 2 6502-32-32

S99-A 1/8 5500-02-02S99-B 1/4 5500-04-04 S99-BA 1/4 x 1/8 5500-04-02 S99-C 3/8 5500-06-06 S99-CB 3/8 x 1/4 5500-06-04 S99-D 1/2 5500-08-08 S99-DB 1/2 x 1/4 5500-08-04 S99-DC 1/2 x 3/8 5500-08-06 S99-E 3/4 5500-12-12 S99-ED 3/4 x 1/2 5500-12-08 S99-F 1 5500-16-16 S99-FE 1 x 3/4 5500-16-12 S99-G 1-1/4 5500-20-20 S99-H 1-1/2 5500-24-24 S99-I 2 5500-32-32

PipePart Number Style Number

Female Pipe Elbow 90° - FPT x FPTPipePart Number Style Number

S100-A 1/8 5504-02-02 S100-B 1/4 5504-04-04 S100-BA 1/4 x 1/8 5504-04-02 S100-C 3/8 5504-06-06 S100-CB 3/8 x 1/4 5504-06-04 S100-D 1/2 5504-08-08 S100-DB 1/2 x 1/4 5504-08-04 S100-DC 1/2 x 3/8 5504-08-06 S100-E 3/4 5504-12-12 S100-F 1 5504-16-16 S100-FE 1 x 3/4 5504-16-12 S100-G 1-1/4 5504-20-20 S100-H 1-1/2 5504-24-24

Steel 37° J.I.C. Swivel Adaptors

Steel Pipe Adaptors

Page 103: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 103

Female Pipe Tee - FPT x FPT x FPTPipePart Number Style Number

S101-A 1/8 5605-02-02-02 S101-B 1/4 5605-04-04-04 S101-C 3/8 5605-06-06-06 S101-D 1/2 5605-08-08-08 S101-E 3/4 5605-12-12-12 S101-F 1 5605-16-16-16 S101-G 1-1/4 5605-20-20-20 S101-H 1-1/2 5605-24-24-24 S101-I 2 5605-32-32-32

Female Pipe Cross - FPT x FPT x FPT x FPTPipePart Number Style Number

S102-B 1/4 5652-04-04-04-04 S102-C 3/8 5652-06-06-06-06 S102-D 1/2 5652-08-08-08-08 S102-E 3/4 5652-12-12-12-12 S102-F 1 5652-16-16-16-16

Female Pipe Coupling - FPT x FPTPipePart Number Style Number

S103-A 1/8 5000-02-02 S103-B 1/4 5000-04-04S103-C 3/8 5000-06-06S103-D 1/2 5000-08-08S103-E 3/4 5000-12-12S103-F 1 5000-16-16S103-G 1-1/4 5000-20-20S103-H 1-1/2 5000-24-24S103-I 2 5000-32-32

Female Pipe Elbow 45° - FPT x FPT

S105-A 1/8 5505-02-02 S105-B 1/4 5505-04-04 S105-C 3/8 5505-06-06 S105-D 1/2 5505-08-08 S105-E 3/4 5505-12-12 S105-F 1 5505-16-16 S105-G 1-1/4 5505-20-20

PipePart Number Style Number

Steel Pipe Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 104: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 104

Male Pipe Branch Tee - FPT x FPT x MPTPipePart Number Style Number

S106-A 1/8 5604-02-02-02 S106-B 1/4 5604-04-04-04 S106-C 3/8 5604-06-06-06 S106-D 1/2 5604-08-08-08 S106-E 3/4 5604-12-12-12 S106-F 1 5604-16-16-16 S106-G 1-1/4 5604-20-20-20 S106-H 1-1/2 5604-24-24-24

Street Tee - FPT x MPT x FPTPipePart Number Style Number

S107-A 1/8 5602-02-02-02 S107-B 1/4 5602-04-04-04 S107-C 3/8 5602-06-06-06 S107-D 1/2 5602-08-08-08 S107-E 3/4 5602-12-12-12 S107-F 1 5602-16-16-16 S107-G 1-1/4 5602-20-20-20 S107-H 1-1/2 5602-24-24-24

Female Pipe Cap - FPTPipePart Number Style Number

S108-A 1/8 5406C-02S108-B 1/4 5406C-04S108-C 3/8 5406C-06S108-D 1/2 5406C-08S108-E 3/4 5406C-12

Square Head Plug - MPTPipePart Number Style Number

S109-A 1/8 5406SHP-02S109-B 1/4 5406SHP-04S109-C 3/8 5406SHP-06S109-D 1/2 5406SHP-08S109-E 3/4 5406SHP-12S109-F 1 5406SHP-16S109-G 1-1/4 5406SHP-20

Steel Pipe Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 105: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 105

Reducer Bushing - MPT x FPT

S110-BA 1/4 1/8 5406-04-02S110-CA 3/8 1/8 5406-06-02S110-CB 3/8 1/4 5406-06-04S110-DA 1/2 1/8 5406-08-02S110-DB 1/2 1/4 5406-08-04S110-DC 1/2 3/8 5406-08-06S110-EA 3/4 1/8 5406-12-02S110-EB 3/4 1/4 5406-12-04S110-EC 3/4 3/8 5406-12-06S110-ED 3/4 1/2 5406-12-08S110-FB 1 1/4 5406-16-04S110-FC 1 3/8 5406-16-06S110-FD 1 1/2 5406-16-08S110-FE 1 3/4 5406-16-12S110-GB 1-1/4 1/4 5406-20-04S110-GC 1-1/4 3/8 5406-20-06S110-GD 1-1/4 1/2 5406-20-08S110-GE 1-1/4 3/4 5406-20-12S110-GF 1-1/4 1 5406-20-16S110-HB 1-1/2 1/4 5406-24-04S110-HC 1-1/2 3/8 5406-24-06S110-HD 1-1/2 1/2 5406-24-08S110-HE 1-1/2 3/4 5406-24-12S110-HF 1-1/2 1 5406-24-16S110-HG 1-1/2 1-1/4 5406-24-20S110-IE 2 3/4 5406-32-12S110-IF 2 1 5406-32-16S110-IG 2 1-1/4 5406-32-20S110-IH 2 1-1/2 5406-32-24

MalePart Number Style Number

90° Street Elbow - MPT x FPT

S116-A 1/8 1/8 5502-02-02 S116-AB 1/8 1/4 5502-02-04 S116-B 1/4 1/4 5502-04-04 S116-BA 1/4 1/8 5502-04-02 S116-BC 1/4 3/8 5502-04-06 S116-C 3/8 3/8 5502-06-06 S116-CA 3/8 1/8 5502-06-02S116-CB 3/8 1/4 5502-06-04 S116-CD 3/8 1/2 5502-06-08 S116-D 1/2 1/2 5502-08-08 S116-DB 1/2 1/4 5502-08-04 S116-DC 1/2 3/8 5502-08-06 S116-DE 1/2 3/4 5502-08-12 S116-E 3/4 3/4 5502-12-12 S116-ED 3/4 1/2 5502-12-08 S116-F 1 1 5502-16-16 S116-FE 1 3/4 5502-16-12S116-G 1-1/4 1-1/4 5502-20-20 S116-GF 1-1/4 1 5502-20-16 S116-H 1-1/2 1-1/2 5502-24-24 S116-I 2 2 5502-32-32

Part Number Style Number

Female

Male Female

Steel Pipe Adaptors

Page 106: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 106

Hex Socket Pipe Plug - MPTPipePart Number Style Number

S118-A 1/8 5406HHP-02S118-B 1/4 5406HHP-04S118-C 3/8 5406HHP-06S118-D 1/2 5406HHP-08S118-E 3/4 5406HHP-12S118-F 1 5406HHP-16S118-G 1-1/4 5406HHP-20S118-H 1-1/2 5406HHP-24S118-I 2 5406HHP-32

Reducing Coupling - FPT x FPTPipePart Number Style Number

S119-BA 1/4 x 1/8 5000-04-02S119-CA 3/8 x 1/8 5000-06-02S119-CB 3/8 x 1/4 5000-06-04S119-DB 1/2 x 1/4 5000-08-04S119-DC 1/2 x 3/8 5000-08-06S119-EB 3/4 x 1/4 5000-12-04S119-EC 3/4 x 3/8 5000-12-06S119-ED 3/4 x 1/2 5000-12-08S119-FD 1 x 1/2 5000-16-08S119-FE 1 x 3/4 5000-16-12S119-GF 1-1/4 x 1 5000-20-16

Pipe ReducerPart Number Style NumberS120-AA 1/8 1/8 5405-02-02S120-BA 1/4 1/8 5405-02-04S120-BB 1/4 1/4 5405-04-04S120-CA 3/8 1/8 5405-02-06S120-CB 3/8 1/4 5405-04-06S120-CC 3/8 3/8 5405-06-06S120-DA 1/2 1/8 5405-02-08S120-DB 1/2 1/4 5405-04-08S120-DC 1/2 3/8 5405-06-08S120-DD 1/2 1/2 5405-08-08S120-EB 3/4 1/4 5405-04-12S120-EC 3/4 3/8 5405-06-12S120-ED 3/4 1/2 5405-08-12S120-EE 3/4 3/4 5405-12-12S120-FD 1 1/2 5405-08-16S120-FE 1 3/4 5405-12-16S120-FF 1 1 5405-16-16S120-GF 1-1/4 1 5405-16-20S120-GG 1-1/4 1-1/4 5405-20-20S120-HG 1-1/2 1-1/4 5405-20-24S120-IH 2 1-1/2 5405-24-32

MaleFemale

Steel Pipe Adaptors

Page 107: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 107

Hex Head Plug - MPTPipePart Number Style Number

S121-A 1/8 5406P-02S121-B 1/4 5406P-04S121-C 3/8 5406P-06S121-D 1/2 5406P-08S121-E 3/4 5406P-12S121-F 1 5406P-16S121-G 1-1/4 5406P-20S121-H 1-1/2 5406P-24S121-I 2 5406P-32

Hex Pipe Nipple - MPT x MPTPipePart Number Style Number

S122-A 1/8 5404-02-02S122-B 1/4 5404-04-04S122-BA 1/4 x 1/8 5404-04-02S122-C 3/8 5404-06-06S122-CA 3/8 x 1/8 5404-06-02S122-CB 3/8 x 1/4 5404-06-04S122-D 1/2 5404-08-08S122-DB 1/2 x 1/4 5404-08-04S122-DC 1/2 x 3/8 5404-08-06S122-E 3/4 5404-12-12S122-EB 3/4 x 1/4 5404-12-04S122-EC 3/4 x 3/8 5404-12-06S122-ED 3/4 x 1/2 5404-12-08S122-F 1 5404-16-16S122-FD 1 x 1/2 5404-16-08S122-FE 1 x 3/4 5404-16-12S122-G 1-1/4 5404-20-20S122-GE 1-1/4 x 3/4 5404-20-12S122-GF 1-1/4 x 1 5404-20-16S122-H 1-1/2 5404-24-24S122-HE 1-1/2 x 3/4 5404-24-12S122-HF 1-1/2 x 1 5404-24-16S122-HG 1-1/2 x 1-1/4 5404-24-20S122-I 2 5404-32-32S122-IH 2 x 1/2 5404-32-24

45° Street Elbow - MPT x FPTPipePart Number Style Number

S124-A 1/8 5503-02-02 S124-B 1/4 5503-04-04 S124-C 3/8 5503-06-06 S124-D 1/2 5503-08-08 S124-E 3/4 5503-12-12 S124-F 1 5503-16-16 S124-G 1-1/4 5503-20-20 S124-H 1-1/2 5503-24-24

Steel Pipe Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 108: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 108

Male Pipe Tee - MPT x MPT x MPTPipePart Number Style Number

SM101-A 1/8 5600-02-02-02 SM101-B 1/4 5600-04-04-04 SM101-C 3/8 5600-06-06-06 SM101-D 1/2 5600-08-08-08 SM101-E 3/4 5600-12-12-12 SM101-F 1 5600-16-16-16

Female Pipe Swivel 90° Elbow - FPT x NPSMPipePart Number Style Number

SW100-A 1/8 1/8 1502-02-02 SW100-B 1/4 1/4 1502-04-04 SW100-BA 1/4 1/8 1502-04-02 SW100-C 3/8 3/8 1502-06-06 SW100-CB 3/8 1/4 1502-06-04 SW100-CD 3/8 1/2 1502-06-08 SW100-D 1/2 1/2 1502-08-08 SW100-E 3/4 3/4 1502-12-12 SW100-EF 3/4 1 1502-12-16 SW100-F 1 1 1502-16-16 SW100-G 1-1/4 1-1/4 1502-20-20 SW100-H 1-1/2 1-1/2 1502-24-24 SW100-I 2 2 1502-32-32

Female Pipe Swivel Tee - NPSM x NPSM x NPSM

Swivel

Part Number Style NumberSwivelSW1011-A 1/8 1603-02-02-02 SW1011-B 1/4 1603-04-04-04 SW1011-C 3/8 1603-06-06-06 SW1011-D 1/2 1603-08-08-08 SW1011-E 3/4 1603-12-12-12 SW1011-F 1 1603-16-16-16

Female Pipe Swivel Branch Tee - NPSM x NPSM x FPTSwivelPart Number Style NumberPipe

SW101-A 1/8 1/8 1602-02-02-02 SW101-B 1/4 1/4 1602-04-04-04 SW101-C 3/8 3/8 1602-06-06-06 SW101-D 1/2 1/2 1602-08-08-08 SW101-CD 3/8 1/2 1602-08-06-06 SW101-E 3/4 3/4 1602-12-12-12SW101-F 1 1 1602-16-16-16 SW101-G 1-1/4 1-1/4 1602-20-20-20

Steel Pipe Adaptors

Steel Swivel NPSM Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 109: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 109

Female Pipe Swivel Elbow 45° - FPT x NPSMPipePart Number Style NumberSwivel

SW105-B 1/4 1/4 1504-04-04 SW105-C 3/8 3/8 1504-06-06 SW105-CB 3/8 1/4 1504-06-04 SW105-E 3/4 3/4 1504-12-12 SW105-F 1 1 1504-16-16 SW105-G 1-1/4 1-1/4 1504-20-20 SW105-H 1-1/2 1-1/2 1504-24-24

Female Pipe Swivel Branch Tee - NPSM x NPSM x MPTSwivelPart Number Style NumberPipe

SW106-A 1/8 1/8 1601-02-02-02 SW106-B 1/4 1/4 1601-04-04-04 SW106-BC 1/4 3/8 1601-06-04-04SW106-BD 1/4 1/2 1601-08-04-04 SW106-C 3/8 3/8 1601-06-06-06SW106-CD 3/8 1/2 1601-08-06-06 SW106-D 1/2 1/2 1601-08-08-08 SW106-E 3/4 3/4 1601-12-12-12 SW106-FE 1 3/4 1601-12-16-16 SW106-F 1 1 1601-16-16-16 SW106-G 1-1/4 1-1/4 1601-20-20-20

Female Pipe Swivel Coupling - FPT x NPSMPipePart Number Style NumberSwivel

SW103-A 1/8 1/8 1405-0202SW103-B 1/4 1/4 1405-0404SW103-BC 1/4 3/8 1405-0406SW103-CB 3/8 1/4 1405-0604SW103-C 3/8 3/8 1405-0606SW103-CD 3/8 1/2 1405-0608SW103-DC 1/2 3/8 1405-0806SW103-D 1/2 1/2 1405-0808SW103-ED 3/4 1/2 1405-1208SW103-E 3/4 3/4 1405-1212SW103-EF 3/4 1 1405-1216SW103-FE 1 3/4 1405-1612SW103-F 1 1 1405-1616SW103-G 1-1/4 1-1/4 1405-2020SW103-H 1-1/2 1-1/2 1405-2424SW103-I 2 2 1405-3232

Steel Swivel NPSM Adaptors

Page 110: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 110

Female Pipe Swivel Connector - MPT x NPSMPipePart Number Style NumberSwivel

SW120-A 1/8 1/8 1404-0202SW120-AB 1/8 1/4 1404-0204SW120-BA 1/4 1/8 1404-0402SW120-B 1/4 1/4 1404-0404SW120-BC 1/4 3/8 1404-0406SW120-BD 1/4 1/2 1404-0408SW120-CB 3/8 1/4 1404-0604SW120-C 3/8 3/8 1404-0606SW120-CD 3/8 1/2 1404-0608SW120-DB 1/2 1/4 1404-0804SW120-DC 1/2 3/8 1404-0806SW120-D 1/2 1/2 1404-0808SW120-DE 1/2 3/4 1404-0812SW120-ED 3/4 1/2 1404-1208SW120-E 3/4 3/4 1404-1212SW120-EF 3/4 1 1404-1216SW120-FE 1 3/4 1404-1612SW120-F 1 1 1404-1616SW120-FG 1 1-1/4 1404-1620SW120-GF 1-1/4 1 1404-2016SW120-G 1-1/4 1-1/4 1404-2020SW120-GH 1-1/4 1-1/2 1404-2024SW120-HG 1-1/2 1-1/4 1404-2420SW120-H 1-1/2 1-1/2 1404-2424SW120-I 2 2 1404-3232

SW116-A 1/8 1/8 1501-02-02 SW116-AB 1/8 1/4 1501-02-04 SW116-B 1/4 1/4 1501-04-04 SW116-BA 1/4 1/8 1501-04-02 SW116-BC 1/4 3/8 1501-04-06 SW116-BD 1/4 1/2 1501-04-08 SW116-C 3/8 3/8 1501-06-06 SW116-CD 3/8 1/2 1501-06-08 SW116-D 1/2 1/2 1501-08-08 SW116-DB 1/2 1/4 1501-08-04 SW116-DC 1/2 3/8 1501-08-06 SW116-DE 1/2 3/4 1501-08-12 SW116-E 3/4 3/4 1501-12-12 SW116-EC 3/4 3/8 1501-12-06 SW116-ED 3/4 1/2 1501-12-08 SW116-EF 3/4 1 1501-12-16 SW116-F 1 1 1501-16-16 SW116-FE 1 3/4 1501-16-12 SW116-FG 1 3/4 1501-16-20 SW116-G 1-1/4 1-1/4 1501-20-20 SW116-GF 1-1/4 1 1501-20-16 SW116-H 1-1/2 1-1/2 1501-24-24 SW116-I 2 2 1501-32-32

PipePart Number Style NumberSwivel

Steel Swivel NPSM Adaptors

Female Pipe Swivel Elbow 90° - MPT x NPSM

Page 111: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 111

Female Pipe Swivel Elbow 45° - MPT x NPSM

SW124-A 1/8 1/8 1503-02-02-4SW124-AB 1/8 1/4 1503-02-04-4SW124-B 1/4 1/4 1503-04-04-4SW124-BC 1/4 3/8 1503-04-06-4SW124-C 3/8 3/8 1503-06-06-4SW124-CB 3/8 1/4 1503-06-04-4SW124-CD 3/8 1/2 1503-06-08-4SW124-D 1/2 1/2 1503-08-08-4SW124-DC 1/2 3/8 1503-08-06-4SW124-E 3/4 3/4 1503-12-12-4SW124-ED 3/4 1/2 1503-12-08-4SW124-F 1 1 1503-16-16-4SW124-FE 1 3/4 1503-16-12-4SW124-FG 1 1-1/4 1503-16-20-4SW124-G 1-1/4 1-1/4 1503-20-20-4SW124-GF 1-1/4 1 1503-20-16-4SW124-H 1-1/2 1-1/2 1503-24-24-4SW124-I 2 2 1503-32-32-4

PipePart Number Style NumberSwivel

Beaded Male Hose Barb Elbow 90° - Hose I.D. x MPTPipePart Number Style NumberHose I.D.

S139-4A 1/4 1/8 4501-04-02S139-4B 1/4 1/4 4501-04-04S139-6B 3/8 1/4 4501-06-04S139-6C 3/8 3/8 4501-06-06S139-8C 1/2 3/8 4501-08-06S139-8D 1/2 1/2 4501-08-08S139-10C 5/8 3/8 4501-10-06S139-10D 5/8 1/2 4501-10-08S139-12D 3/4 1/2 4501-12-08S139-12E 3/4 3/4 4501-12-12S139-16F 1 1 4501-16-16S139-20F 1-1/4 1 4501-20-16S139-20G 1-1/4 1-1/4 4501-20-20S139-24H 1-1/2 1-1/2 4501-24-24

Steel Swivel NPSM Adaptors

Steel Beaded Hose Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 112: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 112

PipePart Number Style NumberS143-4A 1/4 1/8 4404-04-02S143-4B 1/4 1/4 4404-04-04S143-5A 5/16 1/8 4404-05-02S143-6B 3/8 1/4 4404-06-04S143-6C 3/8 3/8 4404-06-06S143-8C 1/2 3/8 4404-08-06S143-8D 1/2 1/2 4404-08-08S143-10C 5/8 3/8 4404-10-06S143-10D 5/8 1/2 4404-10-08S143-12D 3/4 1/2 4404-12-08S143-12E 3/4 3/4 4404-12-12S143-12F 3/4 1 4404-12-16S143-16E 1 3/4 4404-16-12S143-16F 1 1 4404-16-16S143-20F 1-/14 1 4404-20-16S143-20G 1-1/4 1-/14 4404-20-20S143-24H 1-1/2 1-1/2 4404-24-24

Hose I.D.Beaded Male Hose Barb - Hose I.D. x MPT

Steel O-Ring Boss Adaptors

Steel Beaded Hose Adaptors

O-Ring Boss Female Adaptor - FORB x MPTPart Number Style NumberO-Ring PipeSO33-4A 7/16-20 1/8 6404-04-02SO33-4B 7/16-20 1/4 6404-04-04SO33-5A 1/2-20 1/8 6404-05-02SO33-6B 9/16-18 1/4 6404-06-04SO33-6C 9/16-18 3/8 6404-06-06SO33-6D 9/16-18 1/2 6404-06-08SO33-8C 3/4-16 3/8 6404-08-06SO33-8D 3/4-16 1/2 6404-08-08SO33-10C 7/8-14 3/8 6404-10-06SO33-10D 7/8-14 1/2 6404-10-08SO33-12E 1-1/16-12 3/4 6404-12-12SO33-16F 1-5/16-12 1 6404-16-16SO33-16G 1-5/16-12 1-1/4 6404-16-20SO33-20G 1-5/8-12 1-1/4 6404-20-20SO33-24H 1-7/8-12 1-1/2 6404-24-24

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 113: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 113

TubePart Number Style NumberO-RingSO45-4 1/4 7/16-20 6803-04-04-04 SO45-5 5/16 1/2-20 6803-05-05-05 SO45-6 3/8 9/16-18 6803-06-06-06 SO45-8 1/2 3/4-16 6803-08-08-08 SO45-810 1/2 7/8-14 6803-08-08-10SO45-10 5/8 7/8-14 6803-10-10-10 SO45-12 3/4 1-1/6-12 6803-12-12-12 SO45-1210 3/4 7/8-14 6803-12-12-10SO45-16 1 1-5/16-12 6803-16-16-16 SO45-20 1-1/4 1-5/8-12 6803-20-20-20

O-Ring Boss Tee - MJIC x MJIC x MORB

O-Ring Boss Reducer - MORB x FORBPart Number Style NumberMale FemaleSO35-46 7/16-20 9/16-18 6410-04-06SO35-64 9/16-18 7/16-20 6410-06-04SO35-68 9/16-18 3/4-16 6410-06-08SO35-84 3/4-16 7/16-20 6410-08-04SO35-86 3/4-16 9/16-18 6410-08-06SO35-810 3/4-16 7/8-14 6410-08-10SO35-812 3/4-16 1-1/16-12 6410-08-12SO35-104 7/8-14 7/16-20 6410-10-04SO35-106 7/8-14 9/16-18 6410-10-06SO35-108 7/8-14 3/4-16 6410-10-08SO35-1012 7/8-14 1-1/16-12 6410-10-12SO35-126 1-1/16-12 9/16-18 6410-12-06SO35-128 1-1/16-12 3/4-16 6410-12-08SO35-1210 1-1/16-12 7/8-14 6410-12-10SO35-1216 1-1/16-12 1-5/16-12 6410-12-16SO35-1612 1-5/16-12 1-1/16-12 6410-16-12SO35-1620 1-5/16-20 1-5/8-12 6410-16-20SO35-2012 1-5/8-12 1-1/16-12 6410-20-12SO35-2016 1-5/8-12 1-5/16-12 6410-20-16SO35-2412 1-7/8-12 1-1/16-12 6410-24-12SO35-2416 1-7/8-12 1-5/16-12 6410-24-16SO35-2420 1-7/8-12 1-5/8-12 6410-24-20SO35-3220 2-1/4-12 1-5/8-12 6410-32-20SO35-3224 2-1/4-12 1-7/8-12 6410-32-24

Steel O-Ring Boss Adaptors

Page 114: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 114

O-Ring Boss Connector - MJIC x MORBTubePart Number Style NumberO-Ring

SO48-2 1/8 5/16-24 6400-02-02SO48-4 1/4 7/16-20 6400-04-04SO48-42 1/4 5/16-24 6400-04-02SO48-45 1/4 1/2-20 6400-04-05SO48-46 1/4 9/16-18 6400-04-06SO48-48 1/4 3/4-16 6400-04-08SO48-410 1/4 7/8-14 6400-04-10SO48-5 5/16 1/2-20 6400-05-05SO48-54 5/16 7/16-20 6400-05-04SO48-56 5/16 9/16-18 6400-05-06SO48-58 5/16 3/4-16 6400-05-08SO48-6 3/8 9/16-18 6400-06-06SO48-64 3/8 7/16-20 6400-06-04SO48-65 3/8 1/2-20 6400-06-05SO48-68 3/8 3/4-16 6400-06-08SO48-610 3/8 7/8-14 6400-06-10SO48-612 3/8 1-1/16-12 6400-06-12SO48-616 3/8 1-5/16-12 6400-06-16SO48-8 1/2 3/4-16 6400-08-08SO48-84 1/2 7/16-20 6400-08-04SO48-85 1/2 1/2-20 6400-08-05SO48-86 1/2 9/16-18 6400-08-06SO48-810 1/2 7/8-14 6400-08-10SO48-812 1/2 1-1/16-12 6400-08-12SO48-816 1/2 1-5/16-12 6400-08-16SO48-10 5/8 7/8-14 6400-10-10SO48-106 5/8 9/16-18 6400-10-06SO48-108 5/8 3/4-16 6400-10-08SO48-1012 5/8 1-1/16-12 6400-10-12SO48-1014 5/8 1-3/16-12 6400-10-14SO48-1016 5/8 1-5/16-12 6400-10-16SO48-12 3/4 1-1/16-12 6400-12-12SO48-128 3/4 3/4-16 6400-12-08SO48-1210 3/4 7/8-14 6400-12-10SO48-1214 3/4 1-3/16-12 6400-12-14SO48-1216 3/4 1-5/16-12 6400-12-16SO48-1220 3/4 1-5/8-12 6400-12-20SO48-16 1 1-5/16-12 6400-16-16SO48-1610 1 7/8-14 6400-16-10SO48-1612 1 1-1/16-12 6400-16-12SO48-1614 1 1-3/16-12 6400-16-14SO48-1620 1 1-5/8-12 6400-16-20SO48-20 1-1/4 1-5/8-12 6400-20-20SO48-2012 1-1/4 1-1/16-12 6400-20-12SO48-2016 1-1/4 1-5/16-12 6400-20-16SO48-2024 1-1/4 1-7/8-12 6400-20-24SO48-24 1-1/2 1-7/8-12 6400-24-24SO48-2420 1-1/2 1-5/8-12 6400-24-20SO48-2432 1-1/2 2-1/4-12 6400-24-32SO48-32 2 2-1/4-12 6400-32-32SO48-3224 2 1-7/8-12 6400-32-24

Steel O-Ring Boss Adaptors

Page 115: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 115

TubePart Number Style NumberO-Ring

TubePart Number Style NumberO-RingSO48L-4 1/4 7/16-20 6400L-04-04SO48L-5 5/16 1/2-20 6400L-05-05SO48L-6 3/8 9/16-18 6400L-06-06SO48L-68 3/8 3/4-16 6400L-06-08SO48L-8 1/2 3/4-16 6400L-08-08SO48L-10 5/8 7/8-14 6400L-10-10SO48L-12 3/4 1-1/16-12 6400L-12-12SO48L-16 1 1-5/16-12 6400L-16-16SO48L-20 1-1/4 1-5/8-12 6400L-20-20SO48L-24 1-1/2 1-7/8-12 6400L-24-24

SO49-2 1/8 5/16-24 6801-02-02 SO49-4 1/4 7/16-20 6801-04-04 SO49-46 1/4 9/16-18 6801-04-06 SO49-5 5/16 1/2-20 6801-05-05 SO49-54 5/16 7/16-20 6801-05-04 SO49-58 5/16 3/4-16 6801-05-08SO49-6 3/8 9/16-18 6801-06-06 SO49-64 3/8 7/16-20 6801-06-04 SO49-65 3/8 9/16-18 6801-06-05SO49-68 3/8 3/4-16 6801-06-08SO49-612 3/8 1-1/16-12 6801-06-12SO49-8 1/2 3/4-16 6801-08-08SO49-86 1/2 9/16-18 6801-08-06SO49-810 1/2 7/8-14 6801-08-10SO49-812 1/2 1-1/16-12 6801-08-12SO49-816 1/2 1-5/16-12 6801-08-16SO49-10 5/8 7/8-14 6801-10-10SO49-108 5/8 3/4-16 6801-10-08SO49-1012 5/8 1-1/16-12 6801-10-12SO49-1016 5/8 1-5/16-12 6801-10-16SO49-12 3/4 1-1/16-12 6801-12-12SO49-128 3/4 3/4-16 6801-12-08SO49-1210 3/4 7/8-14 6801-12-10SO49-1216 3/4 1-5/16-12 6801-12-16SO49-14 7/8 1-3/16-12 6801-14-14SO49-16 1 1-5/16-12 6801-16-16SO49-168 1 3/4-16 6801-16-08SO49-1614 1 1-3/16-12 6801-16-14SO49-1620 1 1-5/8-12 6801-16-20SO49-20 1-1/4 1-5/8-12 6801-20-20SO49-2012 1-1/4 1-1/16-12 6801-20-12SO49-24 1-1/2 1-7/8-12 6801-24-24SO49-32 2 2-1/4-12 6801-32-32

O-Ring Boss Elbow 90° - MJIC x MORB

O-Ring Boss Long Connector - MJIC x MORB

Steel O-Ring Boss Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 116: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 116

O-Ring Boss Run Tee - MJIC x MORB x MJICTubePart Number Style NumberO-Ring

SO51-4 1/4 7/16-20 6804-04-04-04 SO51-46 1/4 9/16-18 6804-04-06-04 SO51-5 5/16 1/2-20 6804-05-05-05 SO51-6 3/8 9/16-18 6804-06-06-06 SO51-68 3/8 3/4-16 6804-06-08-06SO51-8 1/2 3/4-16 6804-08-08-08 SO51-810 1/2 7/8-14 6804-08-10-08SO51-10 5/8 7/8-14 6804-10-10-10 SO51-1012 5/8 1-1/16-12 6804-10-12-10SO51-12 3/4 1-1/16-12 6804-12-12-12 SO51-14 7/8 1-3/16-12 6804-14-14-14SO51-16 1 1-5/16-12 6804-16-16-16 SO51-20 1-1/4 1-5/8-12 6804-20-20-20 SO51-24 1-1/2 1-7/8-12 6804-24-24-24SO51-32 2 2-1/4-12 6804-32-32-32

O-Ring Boss Long Elbow 90° - MJIC x MORBTubePart Number Style NumberO-Ring

SO49L-4 1/4 7/16-20 6801L-04-04 SO49L-6 3/8 9/16-18 6801L-06-06 SO49L-8 1/2 3/4-16 6801L-08-08 SO49L-10 5/8 7/8-14 6801L-10-10 SO49L-12 3/4 1-1/16-12 6801L-12-12 SO49L-16 1 1-5/16-12 6801L-16-16

Steel O-Ring Boss Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 117: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 117

Part Number Style NumberO-RingSO118-4 7/16-20 6408HHP-04SO118-5 1/2-20 6408HHP-05SO118-6 916-18 6408HHP-06SO118-8 3/4-16 6408HHP-08SO118-10 7/8-14 6408HHP-10SO118-12 1-1/16-12 6408HHP-12SO118-14 1-3/16-12 6408HHP-14SO118-16 1-5/16-12 6408HHP-16SO118-20 1-5/8-12 6408HHP-20SO118-24 1-7/8-12 6408HHP-24SO118-32 2-1/4-12 6408HHP-32

TubePart Number Style NumberO-RingSO54-4 1/4 7/16-20 6802-04-04 SO54-45 1/4 1/2-20 6802-04-05SO54-46 1/4 9/16-18 6802-04-06SO54-5 5/16 1/2-20 6802-05-05SO54-54 5/16 7/16-20 6802-05-04SO54-56 5/16 9/16-18 6802-05-06SO54-6 3/8 9/16-18 6802-06-06SO54-64 3/8 7/16-20 6802-06-04SO54-65 3/8 1/2-20 6802-06-05SO54-68 3/8 3/4-16 6802-06-08SO54-610 3/8 7/8-14 6802-06-10SO54-8 1/2 3/4-16 6802-08-08SO54-810 1/2 7/8-14 6802-08-10SO54-10 5/8 7/8-14 6802-10-10 SO54-12 3/4 1-1/16-12 6802-12-12 SO54-128 3/4 3/4-16 6802-12-08 SO54-16 1 1-5/16-12 6802-16-16 SO54-1620 1 1-5/8-12 6802-16-20 SO54-20 1-1/4 1-5/8-12 6802-20-20 SO54-2016 1-1/4 1-5/16-12 6802-20-16 SO54-24 1-1/2 1-7/8-12 6802-24-24

O-Ring Boss Elbow 45° - MJIC x MORB

O-Ring Boss Hex Socket Plug - MORB

Steel O-Ring Boss Adaptors

Page 118: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 118

Steel O-Ring Boss Adaptors

O-Ring Boss Female Pipe Connector - MORB x FPTPart Number Style NumberO-Ring PipeSO120-4A 7/16-20 1/8 6405-04-02SO120-4B 7/16-20 1/4 6405-04-04SO120-4C 7/16-20 3/8 6405-04-06SO120-5A 1/2-20 1/8 6405-05-02SO120-5B 1/2-20 1/4 6405-05-04SO120-6A 9/16-18 1/8 6405-06-02SO120-6B 9/16-18 1/4 6405-06-04SO120-6C 9/16-18 3/8 6405-06-06SO120-6D 9/16-18 1/2 6405-06-08SO120-8B 3/4-16 1/4 6405-08-04SO120-8C 3/4-16 3/8 6405-08-06SO120-8D 3/4-16 1/2 6405-08-08SO120-8E 3/4-16 3/4 6405-08-12SO120-10B 7/8-14 1/4 6405-10-04SO120-10C 7/8-14 3/8 6405-10-06SO120-10D 7/8-14 1/2 6405-10-08SO120-10E 7/8-14 3/4 6405-10-12SO120-12C 1-1/16-12 3/8 6405-12-06SO120-12D 1-1/16-12 1/2 6405-12-08SO120-12E 1-1/16-12 3/4 6405-12-12SO120-12F 1-1/16-12 1 6405-12-16SO120-14D 1-3/16-12 1/2 6405-14-08SO120-14E 1-3/16-12 3/4 6405-14-12SO120-16C 1-5/16-12 3/8 6405-16-06SO120-16D 1-5/16-12 1/2 6405-16-08SO120-16E 1-5/16-12 3/4 6405-16-12SO120-16F 1-5/16-12 1 6405-16-16SO120-16G 1-5/16-12 1-1/4 6405-16-20SO120-20E 1-5/8-12 3/4 6405-20-12SO120-20F 1-5/8-12 1 6405-20-16SO120-20G 1-5/8-12 1-1/4 6405-20-20SO120-20H 1-5/8-12 1-1/2 6405-20-24SO120-24E 1-7/8-12 3/4 6405-24-12SO120-24F 1-7/8-12 1 6405-24-16SO120-24G 1-7/8-12 1-1/4 6405-24-20SO120-24H 1-7/8-12 1-1/2 6405-24-24SO120-32H 2-1/4-12 1-1/2 6405-32-24SO120-32I 2-1/4-12 2 6405-32-32

Page 119: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 119

O-Ring Boss Male Pipe Connector - MORB x MPTPart Number Style NumberO-RingSO122-4A 7/16-20 1/8 6401-04-02SO122-4B 7/16-20 1/4 6401-04-04SO122-5B 1/2-20 1/4 6401-05-04SO122-6B 9/16-18 1/4 6401-06-04SO122-6C 9/16-18 3/8 6401-06-06SO122-8B 3/4-16 1/4 6401-08-04SO122-8C 3/4-16 3/8 6401-08-06SO122-8D 3/4-16 1/2 6401-08-08SO122-8E 3/4-16 3/4 6401-08-12SO122-10C 7/8-14 3/8 6401-10-06SO122-10D 7/8-14 1/2 6401-10-08SO122-10E 7/8-14 3/4 6401-10-12SO122-12D 1-1/16-12 1/2 6401-12-08SO122-12E 1-1/16-12 3/4 6401-12-12SO122-12F 1-1/16-12 1 6401-12-16SO122-16E 1-5/16-12 3/4 6401-16-12SO122-16F 1-5/16-12 1 6401-16-16SO122-20G 1-5/8-12 1-1/4 6401-20-20SO122-24H 1-7/8-12 1-1/2 6401-24-24SO122-32I 2-1/4-12 2 6401-32-32

Pipe

Steel O-Ring Boss Adaptors

O-Ring Boss Hex Head Plug - MORBPart Number Style NumberO-RingSO121-3 3/16 6408-03SO121-4 1/4 6408-04SO121-5 5/16 6408-05SO121-6 3/8 6408-06SO121-8 1/2 6408-08SO121-10 5/8 6408-10SO121-12 3/4 6408-12SO121-14 7/8 6408-14SO121-16 1 6408-16SO121-20 1-1/4 6408-20SO121-24 1-1/2 6408-24SO121-32 2 6408-32

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 120: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 120

O-Ring Boss Beaded Male Hose Barb 90° - Hose I.D. x MORBPart Number Style NumberO-RingSO139-4 1/4 7/16-20 4601-04-04SO139-6 3/8 9/16-18 4601-06-06SO139-8 1/2 3/4-16 4601-08-08SO139-10 5/8 7/8-14 4601-10-10SO139-108 5/8 3/4-16 4601-10-08SO139-12 3/4 1-1/16-12 4601-12-12SO139-128 3/4 3/4-16 4601-12-08SO139-1210 3/4 7/8-14 4601-12-10SO139-16 1 1-5/16-12 4601-16-16SO139-1612 1 1-1/16-12 4601-16-12SO139-1620 1 1-5/8-12 4601-16-20SO139-20 1-1/4 1-5/8-12 4601-20-20SO139-2016 1-1/4 1-5/16-12 4601-20-16SO139-2024 1-1/4 1-7/8-12 4601-20-24SO139-24 1-1/2 1-7/8-12 4601-24-24SO139-32 2 2-1/4-12 4601-32-32

Hose I.D.

O-Ring Boss Beaded Hose Barb - Hose I.D. x MORBPart Number Style NumberO-RingHose I.D.SO143-4 1/4 7/16-20 4604-04-04SO143-6 3/8 9/16-18 4604-06-06SO143-8 1/2 3/4-16 4604-08-08SO143-10 5/8 7/8-14 4604-10-10SO143-12 3/4 1-1/16-12 4604-12-12SO143-16 1 1-5/16-12 4604-16-16SO143-1612 1 1-1/16-12 4604-16-12SO143-1620 1 1-5/8-12 4604-16-20SO143-20 1-1/4 1-5/8-12 4604-20-20SO143-2016 1-1/4 1-5/16-12 4604-20-16SO143-24 1-1/2 1-7/8-12 4604-24-24SO143-2420 1-1/2 1-5/8-12 4604-24-20SO143-32 2 2-1/4-12 4604-32-32

Steel O-Ring Boss Hose Adaptors

Please Note: Pictures are for identifi cation purposes only. Please confi rm specifi c patterns with our customer service.

Page 121: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 121

Part No. LFC100-ALFC100-BLFC100-CLFC100-CALFC100-CBLFC100-DLFC100-DBLFC100-DCLFC100-ELFC100-EBLFC100-ECLFC100-EDLFC100-FLFC100-FCLFC100-FDLFC100-FELFC100-GLFC100-GDLFC100-GELFC100-GFLFC100-HLFC100-HDLFC100-HELFC100-HFLFC100-HGLFC100-ILFC100-IFLFC100-IGLFC100-IHLFC100-JLFC100-JGLFC100-JHLFC100-JILFC100-KLFC100-KILFC100-KJLFC100-L

Cast Brass Elbow 90° - FPT x FPT Cast Brass Tee - FPT x FPT x FPT

Lead Free Cast Brass Pipe Fittings - Sch. 40

Part No. LFC101-ALFC101-BLFC101-CLFC101-CBLFC101-DLFC101-DBLFC101-DCLFC101-DELFC101-ELFC101-ECLFC101-EDLFC101-EDDLFC101-EDELFC101-FLFC101-FBLFC101-FCLFC101-FDLFC101-FDDLFC101-FDELFC101-FDFLFC101-FELFC101-FEDLFC101-FEELFC101-FEFLFC101-GLFC101-GDLFC101-GDGLFC101-GELFC101-GFLFC101-HLFC101-HDLFC101-HELFC101-HFLFC101-HGLFC101-ILFC101-IDLFC101-IELFC101-IFLFC101-IGLFC101-IHLFC101-JLFC101-KLFC101-L

Size1/81/43/8

3/8 x 1/83/8 x 1/4

1/21/2 x 1/41/2 x 3/8

3/43/4 x 1/43/4 x 3/83/4 x 1/2

11 x 3/81 x 1/21 x 3/41-1/4

1-1/4 x 1/21-1/4 x 3/41-1/4 x 1

1-1/21-1/2 x 1/21-1/2 x 3/41-1/2 x 1

1-1/2 x 1-1/42

2 x 12 x 1-1/42 x 1-1/2

2-1/22-1/2 x 1-1/42-1/2 x 1-1/2

2-1/2 x 23

3 x 23 x 2-1/2

4

Size1/8

1/43/8

3/8 x 3/8 x 1/41/2

1/2 x 1/2 x 1/41/2 x 1/2 x 3/81/2 x 1/2 x 3/4

3/43/4 x 3/4 x 3/83/4 x 3/4 x 1/23/4 x 1/2 x 1/23/4 x 1/2 x 3/4

11 x 1 x 1/41 x 1 x 3/81 x 1 x 1/2

1 x 1/2 x 1/21 x 1/2 x 3/41 x 1/2 x 11 x 1 x 3/4

1 x 3/4 x 1/21 x 3/4 x 3/41 x 3/4 x 1

1-1/41-1/4 x 1-1/4 x 1/21-1/4 x 1/2 x 1-1/41-1/4 x 1-1/4 x 3/41-1/4 x 1-1/4 x 1

1-1/21-1/2 x 1-1/2 x 1/21-1/2 x 1-1/2 x 3/41-1/2 x 1-1/2 x 1

1-1/2 x 1-1/2 x 1-1/42

2 x 2 x 1/22 x 2 x 3/42 x 2 x 1

2 x 2 x 1-1/42 x 2 x 1-1/2

2-1/234

Lead Free Cast Brass Pipe Fittings - Sch. 40

3

21

Page 122: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 122

Lead Free Cast Brass Pipe Fittings - Sch. 40 Lead Free Cast Brass Pipe Fittings - Sch. 40

Part No. LFC102-ALFC102-BLFC102-CLFC102-DLFC102-ELFC102-FLFC102-GLFC102-HLFC102-I

Cast Brass Cross - FPT x FPT x FPT x FPT

Part No. LFC103-ALFC103-BLFC103-CLFC103-DLFC103-ELFC103-FLFC103-GLFC103-HLFC103-ILFC103-JLFC103-KLFC103-L

Cast Brass Coupling - FPT x FPT

Part No. LFC104-ALFC104-BLFC104-CLFC104-DLFC104-ELFC104-FLFC104-GLFC104-HLFC104-ILFC104-JLFC104-KLFC104-L

Cast Brass Union (Brass to Iron Seat) - FPT x FPT

Size1/81/43/81/23/41

1-1/41-1/2

2

Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Part No. LFC108-ALFC108-BLFC108-CLFC108-DLFC108-ELFC108-FLFC108-GLFC108-HLFC108-ILFC108-JLFC108-KLFC108-L

Part No. LFC109-ALFC109-BLFC109-CLFC109-DLFC109-ELFC109-FLFC109-GLFC109-HLFC109-ILFC109-JLFC109-KLFC109-L

Part No. LFC105-ALFC105-BLFC105-CLFC105-DLFC105-ELFC105-FLFC105-GLFC105-HLFC105-ILFC105-JLFC105-KLFC105-L

Cast Brass Elbow 45° - FPT x FPT

Cast Brass Cap - FPT x FPT

Cast Brass Square Head Plug - MPT

Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Page 123: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 123

Lead Free Cast Brass Pipe Fittings - Sch. 40Lead Free Cast Brass Pipe Fittings - Sch. 40

Part No. LFC110-BALFC110-CALFC110-CBLFC110-DALFC110-DBLFC110-DCLFC110-EALFC110-EBLFC110-ECLFC110-EDLFC110-FALFC110-FBLFC110-FCLFC110-FDLFC110-FELFC110-GBLFC110-GCLFC110-GDLFC110-GELFC110-GFLFC110-HDLFC110-HELFC110-HFLFC110-HGLFC110-IDLFC110-IELFC110-IFLFC110-IGLFC110-IHLFC110-JFLFC110-JGLFC110-JHLFC110-JILFC110-KFLFC110-KGLFC110-KHLFC110-KILFC110-KJLFC110-LILFC110-LJLFC110-LK

Cast Brass Bushing - MPT x FPTSize

1/4 x 1/83/8 x 1/83/8 x 1/41/2 x 1/81/2 x 1/41/2 x 3/83/4 x 1/83/4 x 1/43/4 x 3/83/4 x 1/21 x 1/81 x 1/41 x 3/81 x 1/21 x 3/4

1-1/4 x 1/41-1/4 x 3/81-1/4 x 1/21-1/4 x 3/41-1/4 x 1

1-1/2 x 1/21-1/2 x 3/41-1/2 x 1

1-1/2 x 1-1/42 x 1/22 x 3/42 x 1

2 x 1-1/42 x 1-1/22-1/2 x 1

2-1/2 x 1-1/42-1/2 x 1-1/2

2-1/2 x 23 x 1

3 x 1-1/43 x 1-1/2

3 x 23 x 2-1/2

4 x 24 x 2-1/2

4 x 3

Part No. LFC111-DLFC111-ELFC111-FLFC111-GLFC111-HLFC111-I

Cast Brass Lock Nut - FPS

Part No. LFC116-ALFC116-BLFC116-CLFC116-DLFC116-ELFC116-FLFC116-GLFC116-HLFC116-ILFC116-JLFC116-KLFC116-L

Part No. LFC118-DLFC118-ELFC118-FLFC118-GLFC118-HLFC118-I

Cast Brass Street Elbow 90° - FPT x MPT

Cast Brass Countersunk Hex/Square Plug - MPTSize/23/41

1-1/41-1/2

2

Size1/23/41

1-1/41-1/2

2

Size1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 124: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 124

Lead Free Cast Brass Pipe Fittings - Sch. 40 Lead Free Cast Brass Pipe Fittings - Sch. 40

Part No. LFC119-BALFC119-CALFC119-CBLFC119-DBLFC119-DCLFC119-EBLFC119-ECLFC119-EDLFC119-FBLFC119-FCLFC119-FDLFC119-FELFC119-GDLFC119-GELFC119-GFLFC119-HDLFC119-HELFC119-HFLFC119-HGLFC119-IDLFC119-IELFC119-IFLFC119-IGLFC119-IHLFC119-JFLFC119-JGLFC119-JHLFC119-JILFC119-KILFC119-KJLFC119-LILFC119-LK

Cast Brass Reducing Coupling - FPT x FPTSize

1/4 x 1/83/8 x 1/83/8 x 1/41/2 x 1/41/2 x 3/83/4 x 1/43/4 x 3/83/4 x 1/21 x 1/41 x 3/81 x 1/21 x 3/4

1-1/4 x 1/21-1/4 x 3/41-1/4 x 1

1-1/2 x 1/21-1/2 x 3/41-1/2 x 1

1-1/2 x 1-1/42 x 1/22 x 3/42 x 1

2 x 1-1/42 x 1-1/22-1/2 x 1

2-1/2 x 1-1/42-1/2 x 1-1/2

2-1/2 x 23 x 2

3 x 2-1/24 x 24 x 3

Part No. LFCCF-DLFCCF-ELFCCF-FLFCCF-GLFCCF-HLFCCF-I

Cast Companion Flange - FPTSize1/23/41

1-1/41-1/2

2

Part No. LFCFF-DLFCFF-ELFCFF-FLFCFF-GLFCFF-HLFCFF-I

Cast Brass Floor Flange - FPTSize1/23/41

1-1/41-1/2

2

Close NipplePart No.LF112-ALF112-BLF112-CLF112-DLF112-ELF112-FLF112-GLF112-HLF112-ILF112-JLF112-KLF112-L

MPT1/81/43/81/23/41

1-1/41-1/2

22-1/2

34

Part No. LFC124-ALFC124-BLFC124-CLFC124-DLFC124-ELFC124-FLFC124-GLFC124-HLFC124-I

Cast Brass Street Elbow 45° - FPT x MPTSize1/81/43/81/23/41

1-1/41-1/2

2

Lead Free Red Brass Pipe Nipples - Sch. 40

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 125: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 125

Lead Free Red Brass Pipe Nipples - Sch. 40 Lead Free Red Brass Pipe Nipples - Sch. 40

Part No. LF113-A11/2LF113-A2LF113-A21/2LF113-A3LF113-A31/2LF113-A4LF113-A41/2LF113-A5LF113-A51/2LF113-A6

LF113-B11/2LF113-B2LF113-B21/2LF113-B3LF113-B31/2LF113-B4LF113-B41/2LF113-B5LF113-B51/2LF113-B6

LF113-C11/2LF113-C2LF113-C21/2LF113-C3LF113-C31/2LF113-C4LF113-C41/2LF113-C5LF113-C51/2LF113-C6

LF113-D11/2LF113-D2LF113-D21/2LF113-D3LF113-D31/2LF113-D4LF113-D41/2LF113-D5LF113-D51/2LF113-D6

Part No. LF113-E11/2LF113-E2LF113-E21/2LF113-E3LF113-E31/2LF113-E4LF113-E41/2LF113-E5LF113-E51/2LF113-E6

LF113-F2LF113-F21/2LF113-F3LF113-F31/2LF113-F4LF113-F41/2LF113-F5LF113-F51/2LF113-F6

LF113-G2LF113-G21/2LF113-G3LF113-G31/2LF113-G4LF113-G41/2LF113-G5LF113-G51/2LF113-G6

LF113-H2LF113-H21/2LF113-H3LF113-H31/2LF113-H4LF113-H41/2LF113-H5LF113-H51/2LF113-H6

LF113-I21/2LF113-I3LF113-I31/2LF113-I4LF113-I41/2LF113-I5LF113-I51/2LF113-I6

Long NippleMPT x Length

1/8 x 1-1/21/8 x 2

1/8 x 2-1/21/8 x 3

1/8 x 3-1/21/8 x 4

1/8 x 4-1/21/8 x 5

1/8 x 5-1/21/8 x 6

1/4 x 1-1/21/4 x 2

1/4 x 2-1/21/4 x 3

1/4 x 3-1/21/4 x 4

1/4 x 4-1/21/4 x 5

1/4 x 5-1/21/4 x 6

3/8 x 1-1/23/8 x 2

3/8 x 2-1/23/8 x 3

3/8 x 3-1/23/8 x 4

3/8 x 4-1/23/8 x 5

3/8 x 5-1/23/8 x 6

1/2 x 1-1/21/2 x 2

1/2 x 2-1/21/2 x 3

1/2 x 3-1/21/2 x 4

1/2 x 4-1/21/2 x 5

1/2 x 5-1/21/2 x 6

MPT x Length3/4 x 1-1/2

3/4 x 23/4 x 2-1/2

3/4 x 33/4 x 3-1/2

3/4 x 43/4 x 4-1/2

3/4 x 53/4 x 5-1/2

3/4 x 6

1 x 21 x 2-1/2

1 x 31 x 3-1/2

1 x 41 x 4-1/2

1 x 51 x 5-1/2

1 x 6

1-1/4 x 21-1/4 x 2-1/2

1-1/4 x 31-1/4 x 3-1/2

1-1/4 x 41-1/4 x 4-1/2

1-1/4 x 51-1/4 x 5-1/2

1-1/4 x 6

1-1/2 x 21-1/2 x 2-1/2

1-1/2 x 31-1/2 x 3-1/2

1-1/2 x 41-1/2 x 4-1/2

1-1/2 x 51-1/2 x 5-1/2

1-1/2 x 6

2 x 2-1/22 x 3

2 x 3-1/22 x 4

2 x 4-1/22 x 5

2 x 5-1/22 x 6

Page 126: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 126

Part No.GP125-8DGP125-12EGP125-16FGP125-20GGP125-24HGP125-32IGP125-40JGP125-48KGP125-64LGP125-96N

Hose x MPT1/2 x 1/23/4 x 3/4

1 x 11-1/4 x 1-1/41-1/2 x 1-1/2

2 x 22-1/2 x 2-1/2

3 x 34 x 46 x 6

Galvanized Combination Hose Nipple - Hose x MPT

Steel Hose Nipples

Part No.GP129-8GP129-12GP129-16GP129-20GP129-24GP129-32GP129-40GP129-48GP129-64GP129-96

Hose1/23/41

1-1/41-1/2

22-1/2

346

Galvanized Hose Mender - Hose x Hose

Part No.MP125-8DMP125-12EMP125-16FMP125-20GMP125-24HMP125-32IMP125-40JMP125-48KMP125-64LMP125-96N

Hose x MPT1/2 x 1/23/4 x 3/4

1 x 11-1/4 x 1-1/41-1/2 x 1-1/2

2 x 22-1/2 x 2-1/2

3 x 34 x 46 x 6

Plain (Unplated) Combination Hose Nipple - Hose x MPT

Steel Hose Nipples

Part No.MP129-8MP129-12MP129-16MP129-20MP129-24MP129-32MP129-40MP129-48MP129-64MP129-96

Hose1/23/41

1-1/41-1/2

22-1/2

346

Plain (Unplated) Hose Mender - Hose x Hose

Merchant Steel Couplings

Part No.HC103-AHC103-BHC103-CHC103-DHC103-EHC103-FHC103-GHC103-HHC103-IHC103-JHC103-KHC103-LHC103-MHC103-N

Size1/81/43/81/23/41

1-1/41-1/2

2* 2-1/2

* 3* 4* 5* 6

Plain (Unplated) Half Coupling - FPS (* FPT)

Page 127: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Page 127

Merchant Steel Couplings

Part No.WS103-AWS103-BWS103-CWS103-DWS103-EWS103-FWS103-GWS103-HWS103-IWS103-JWS103-KWS103-LWS103-MWS103-N

Size1/81/43/81/23/41

1-1/41-1/2

2* 2-1/2

* 3* 4* 5* 6

Plain (Unplated) Full Coupling - FPS (* FPT)

Part No.WS103-A-GALVWS103-B-GALVWS103-C-GALVWS103-D-GALVWS103-E-GALVWS103-F-GALVWS103-G-GALVWS103-H-GALVWS103-I-GALVWS103-J-GALVWS103-K-GALVWS103-L-GALVWS103-M-GALVWS103-N-GALV

Size1/81/43/81/23/41

1-1/41-1/2

2* 2-1/2

* 3* 4* 5* 6

Galvanized Full Coupling - FPS (* FPT)

Please Note: Pictures are for identifi cation purposes only.Please confi rm specifi c patterns with our customer service.

Page 128: Versa Fittings WARNING! · PDF fileVersa Fittings Page 2 TERMS AND CONDITIONS OF SALE Warranty and Limitation of Liability: 1. All Versa products are guaranteed against defects resulting

Burnaby WarehouseVersa Fittings & Mfg. Inc.7810 Express St.Burnaby, British ColumbiaV5A 1T4Phone (604) 420-6540Fax (604) 420-6545

Calgary WarehouseVersa Fittings & Mfg. Inc.Bay 8, 4451-61st Ave. S. ECalgary, AlbertaT2C 1Z6Phone (403) 203-9300Fax (403) 279-4583

Winnipeg WarehouseVersa Fittings & Mfg. Inc.983 Century St.Winnipeg, ManitobaR3H 0W4Phone (204) 694-8068Fax (204) 694-8113

Mississauga Warehouse(Head Office & Manufacturing Plant)Versa Fittings & Mfg. Inc.290 Courtneypark Drive E.Mississauga, OntarioL5T 2S5Phone (905) 564-2600Fax (905) 564-2619Toll Free Phone (866) 832-8372Toll Free Fax (800) 567-2537

Ville Saint Laurent WarehouseRaccords Versa Inc.2313 Rue GuenetteVille Saint Laurent, QuebecH4R 2E9Phone (514) 339-1139Fax (514) 339-2601Toll Free Fax (800) 265-1093

www.versafi ttings.com