Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
CUSTOM GARMENT BRAND PLACEMENT GUIDELINES
ALL TOPS
60mm
Logo Placement Guidelines ● Custom Apparel . v1
40-80mm
10-20mm
40mmFLYING V ICONCHEST POSITION REQUIRED
*** SPECIFIC LOCATIONS ARE DEFINED IN ART FILES
PRIMARY IDENTITYBACK POSITION REQUIRED
VERGE WORDMARKINSIDE COLLAR POSITION OPTIONAL
The Verge Wordmark can be placed at the back center of the inside collar
The word mark must be 40-80mm in width
The Flying V Icon can be placed on the outside collar 20-40mm from the zipper on the left or right side
The icon must be 10-20mm in height
The preferred position of the PRIMARY IDENTITY at center of the back pocket on ALL TOPS. All of the upper back panel and the full area of the pocket panels are also acceptable locations.
The icon must be at least 60mm in height
The Verge Wordmark can be placed at the back center of the outside collar
The wordmark must be 40-80mm in width
40-80mmVERGE WORDMARKOUTSIDE COLLAR POSITION OPTIONAL
FLYING V ICONOUTSIDE COLLAR POSITION OPTIONAL
FRONT BACKThe preferred position of the Flying V Icon is on the upper right chest, located near the collar and shoulder seam on ALL tops. Left side location is also acceptable
The icon must be 20- 40mm in height
The Flying V Iconcan roatate 360◦
on product applications
Logo Placement Guidelines ● Custom Apparel . v1
CUSTOM GARMENT BRAND PLACEMENT GUIDELINES
ALL BOTTOMS
40mm
*** SPECIFIC LOCATIONS ARE DEFINED IN ART FILES
FLYING V ICONSHORT PANEL LOGOS REQUIRED
The Flying V icon must be positioned on ONE POSITION PER SIDE of the following locations as seen in example on ALL long and regular bottoms:
● Lower, outside edges of rear panel● Upper, center area of side panels● Lower, front side panels
The icon must be 20-40mm in height
VERGE WORDMARKGRIPPER BANDS - BOTTOM OPTIONAL
The Verge Wordmark must be positioned on ONE POSITION PER SIDE of the following locations as seen in example on ALL long and regular bottoms:
● Positioned at center on gripper band on the short (printed in 3 locations)● They must mirror other side of garment
The Flying V Iconcan roatate 360◦
on product applications
Logo Placement Guidelines ● Custom Apparel . v1
CUSTOM GARMENT BRAND PLACEMENT GUIDELINES
ALL SPEEDSUITS *** SPECIFIC LOCATIONS ARE DEFINED IN ART FILES
The Verge Wordmark can be placed at the back center of the outside collar
The wordmark must be 40-80mm in width
40-80mmVERGE WORDMARKOUTSIDE COLLAR POSITION OPTIONAL
60mmPRIMARY IDENTITY BACK POSITION REQUIREDThe preferred position of the PRIMARY IDENTITY at center of the back pocket on ALL TOPS. All of the upper back panel and the full area of the pocket panels are also acceptable locations.
The icon must be at least 60mm in height
VERGE WORDMARKGRIPPER BANDS - BOTTOM OPTIONAL
The Wordmark can be positioned at center on the gripper band on the short. It will be printed in 3 locationson on the gripper band
40mmFLYING V ICONSHORT PANEL LOGOS REQUIRED
The Flying V icon must be positioned on ONE POSITION PER SIDE of the following locations as seen in example on ALL long and regular bottoms:
● Lower, outside edges of rear panel● Upper, center area of side panels● Lower, front side panels
The icon must be 20-40mm in height
The Flying V Iconcan roatate 360◦
on product applications
40mmFLYING V ICONCHEST POSITION REQUIRED
The preferred position of the Flying V Icon is on the upper right chest, located near the collar and shoulder seam on ALL tops. Left side location is also acceptable
The icon must be 20-40mm in height