2
VENTEC LOUVRE SMOKE VENTILATION 24v Wall or Roof Mountable Aluminium or Polycarbonate Blades 1 Overlay base without thermal insulation 2 Upstand - No wider than 65mm 3 Thermal insulation of the upstand 4 Upstand and roof water insulation 1 Vent base with thermal insulation 2 Water Insulation 3 Vent thermal insulation 4 Roof thermal insulation 5 Trapezoidal sheet metal 6 Roof load-bearing structure 1 2 3 4 5 6 1 30mm 65mm 150mm min height 2 3 4 UPSTAND GUIDE TRAPEZOIDAL GUIDE The Ventec Louvre with wind deflectors is a Fully Tested and certified low profile, roof or wall mounted louvre which is designed to provide heat and smoke exhaust ventilation in protected stairwells, smoke shafts and corridors within residential apartments, hotels, warehouses, sports centres, shopping mall shops and offices. Its principle application is to protect the buildings occupants escape routes from smoke and also to create a safe means of access for fire fighters. Installation of a base with thermal insulation on a steel structire. Installation of an overlay base without thermal insulation on an upstand.

ventilationsmoke - Vent Engineering · the Ventec louvre with wind deflectors is a Fully tested and certified low profile, roof or wall mounted louvre which is designed to provide

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ventilationsmoke - Vent Engineering · the Ventec louvre with wind deflectors is a Fully tested and certified low profile, roof or wall mounted louvre which is designed to provide

ventec louvRe

BLUES: Pantone 280 CRed: Pantone 485 C

sm

ok

even

tilation

24vWall or Roof mountableAluminium or

Polycarbonate Blades

1 Overlaybasewithoutthermalinsulation2 Upstand-Nowiderthan65mm3 Thermalinsulationoftheupstand4 Upstandandroofwaterinsulation

1 Ventbasewiththermalinsulation2 WaterInsulation3 Ventthermalinsulation4 Roofthermalinsulation5 Trapezoidalsheetmetal6 Roofload-bearingstructure

1

2

3

4

5

6

1

30mm

65mm

150mm

min height

2

3

4

upstand guide trapezoidal guide

BLUES: Pantone 280 CRed: Pantone 485 C

BLUES: Pantone 280 CRed: Pantone 485 C

the Ventec louvre with wind deflectors is a Fully tested and certified low profile, roof or wall mounted louvre which is designed to provide heat and smoke exhaust ventilation in protected stairwells, smoke shafts and corridors within residential apartments, hotels, warehouses, sports centres, shopping mall shops and offices. its principle application is to protect the buildings occupants escape routes from smoke and also to create a safe means of access for fire fighters.

installation of a base with thermal insulation on a steel structire.

installation of an overlay base without thermal insulation on an upstand.

VE0005 - Louvre Data Sheet

Page 2: ventilationsmoke - Vent Engineering · the Ventec louvre with wind deflectors is a Fully tested and certified low profile, roof or wall mounted louvre which is designed to provide

ventec louvRe

BLUES: Pantone 280 CRed: Pantone 485 C

No oNe opeNs more veNtstel 01202 744958, fax 01202 733026 email [email protected] website www.vent.co.ukUnits 16c & 16f, Chalwyn Industrial estate, poole BH12 4pe

sm

ok

even

tilation

24vWall or Roof mountable

Ventfittedwithwinddeflectors

Aluminium orPolycarbonate Blades

product codes

BLUES: Pantone 280 CRed: Pantone 485 C

• aluminum blades as standard• optional opal Polycarbonate blades

available, allowing light to enter interiors• a range of sizes are available to meet

the 1.0 and 1.5m2 minimum free area requirements.

• High efficiency – aerodynamically tested to en12101-2

• Special blade construction ensures that our louvres are completely waterproof.

• Reliability – life cycle tested to class Re300 under en12101-2

• Durability – tested to withstand wind loads of class Wl1500 and snow loads of class Sl550 under en12101-2

• installation – can be fitted into any roof or glazed construction.

product summary

BLUES: Pantone 280 CRed: Pantone 485 C

available in clear and solid louvre blades, the insulated double skin aluminium Ventec louvre natural extract ventilator is suitable for installation at any angle from vertical to horizontal. opening by means of an electric actuator for smoke exhaust and daily ventilation purposes. the ventilator operates in conjunction with a Ventec control panel. it is operated by a manual break glass switch or fireman’s override switch.

louvre lengthlouvre Width

rooF light and daylight sizes

BLUES: Pantone 280 CRed: Pantone 485 C

internal external Free air

WidthxLength WidthxLength1400mm x 1800mm 1540mm x 1940mm 1.59m2

1200mm x 1400mm 1340mm x 1540mm 1,08m2

Bespokesizesavailableonrequest

rV-Vl-7-180-15-e1-so ventec louvre aluminium Blades 1,59m2 Free airrV-Vl-7-180-15-e1-pco ventec louvre Polycarbonate Blades 1,59m2 Free airrV-Vl-7-120-1-e1-so ventec louvre aluminium Blades 1,08m2 Free airrV-Vl-7-120-1-e1-pco ventec louvre Polycarbonate Blades 1,08m2 Free air

UPGRADEava i l ab le• Paint finish to any

Ral colour• Burglar guard• Break glass switch• Battery back-up unit• Bird or insect guard• Fireman’s switch• alternative base details