(20

19

)

UP

76

3C

96

3C

_US_A

-Impe

rial

The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding.Venieri reserves the right of carrying out possible changes at any time and without previous notice because of its policy of steady developement and improvement of the products.

Via Piratello, 106 - 48022 Lugo (RA) ITALY Tel. +39 0545 904411 - Fax +39 0545 30389

e-mail: info@vf-venieri.com www.vf-venieri.com

WHEEL LOADERS

9.63C7.63C

SILENCE, PLEASE.By using new soundabsorving materi-als and special “anti vibration” rubber shocks, the noise inside cabin is rad-ically reduced guaranteeing maxi-mum comfort to the operator.

BE COOL. The brand new ventilation system guarantees operator comfort.You can choose between automatic climate control or the air condi-tioner, thus obtaining the perfect temperature in the cabin.

SAFETY ISOUR PRIORITY.The negative parking brake is inte-grated into the front axle for maxi-mum safety in all operating situa-tions.

4K LINKAGE.New completely redesigned linkage to the latest state of the art for maximum breakout force.

100% VENIERI DESIGN.In the new machines our Venieri Design Center follows the “family feelings” but introduces significant stylistic innovations.

BREATHTAKING VIEW.The new ROPS/FOPS Level II cabin design guarantee a 360 ° visibility, for maximum work place control and highest level of safety.

7.63C9.63C

BUILT FOR POWER, DESIGNED FOR AGILITY.The special design of the counterweight guarantees perfect maneuverability, maximum drive angle and protects the rear light system

DOUBLE ATTENTIONFOR SAVING.The new elecctrically controlled dual speed cooling fan, adjusting the rotation speed according to working conditions, reducing fuel consumption and noise.

TOTAL STABILITY.Oscillating rear axle fixed to the frame with maintenance-free sup-ports.

NEW DEUTZTIER 4i ENGINEThe new Deutz engine complies with the latest emission standards and delivers high torque at low rpm.

ALWAYS CLEAN AIR.With the new air cleaner system, offering a two stage filtration, high efficiencies pre-cleaner plus primary filters and safety filters, we are improving engine protection to a maximum.

DIESEL ENGINE4 cylinder in line engine, turbocharged with intercooler, com-mon-rail injection with electronic control, exhaust gas recirculation, water cooled, dry filtration, oxidation catalyst (DOC). Emissioned according to CE 97/68 - Tier 4i.

Type Deutz TCD 3.6 L4Max. Power 78 kW - 106 HPRated rpm 2,300Power ISO/TR 14396 74,4 kW - 101 HPPower EEC 80/1269 74,4 kW - 101 HPEconomic working range rpm 1,200 - 1,800Max. torque ft-lbf 302.4Bore in 3.86Stroke in 4.72Displacement in3 221

ELECTRIC SYSTEMBattery 12 VoltCapacity EN 60095-1 110 Ah - 850 AAlternator rating 95 AReverse warning StandardWiring according to IP 67 DIN 40050

TRANSMISSION Hydrostatic transmission with automatic power regulation and closed circuit with pumps and variable displacement engine. Gearbox with 2 mechanical selections: 2 work speeds (FWD/REV) and 2 road speeds (FWD/REV)Work speed Forward Reverse1st gear mph 0 ÷ 3 0 ÷ 32nd gear mph 0 ÷ 7 0 ÷ 7

Road speed Forward Reverse1st gear mph 0 ÷ 11 0 ÷ 112nd gear mph 0 ÷ 25* 0 ÷ 25*

* Self limited max speed

AXLESTwo heavy duty equal size axles with planetary final drives in each wheel. Fixed rigid drive axle. Oscillation rear axle on rear chassis section up to a total angle of 25°. Transfer gearbox transferring movement directly to the rear and to the front axle via a trans-mission shaft. Self locking limited slip differential on front axle. Self locking limited slip differential on rear axle (optional).

BRAKESService: hydraulic multi-disc oil brake on front and rear axles. Parking brake: negative hydraulic on front axle, electrically applied.

TYRESStandard 15.5 x 25Option 405/70 R24 | 455/70 R24 | 15.5 R25

STEERINGServo-assisted steering LOAD SENSING system.

Total steering angle 80°Inner tyres turning radius ft in 8’10.42”External tyres turning radius ft in 15’7.24”External bucket turning radius* ft in 17’3.48”

* Bucket on traveling condition

HYDRAULIC SYSTEMTwo gear pump, the first for loader and steering circuit with LOAD SENSING valve, the second for the fan circuit with two rotating speed. Modular two-element control valve with main relief valve. Double acting hydraulic cylinders.Hydraulic oil cooling radiator. Full flow oil filter on the drain pipe. Joystick control with 4 position lifting system and with 3 posi-tion bucket system.

Max. flow gpm 27.74Max. flow with high flow (optional) gpm 34.34Loader relief valve pressure psi 3,626Steering relief valve pressure psi 2,538Lift cylinder in 3.35x32.56Bucket cylinder in 3.94x14.96Lifting time (full) sec. 5.1Lowering time (empty) sec. 3.1Unloading time sec. sec. 1.2Total time of cyclus sec. sec. 9.4

SERVICES CAPACITIESEngine gal 2.11Front axle gal 2.43Rear axle gal 2.4Gear box gal 0.48Hydraulic circuit gal 36.19Brake circuit gal 0.24Fuel gal 36.98Water cooling gal 5.28

TECHNICAL FEATURESStandard bucket capacity yd3 1.83Bucket width ft in 7’4.58”Straight static tipping load lbs 12,346Full turned tipping load 40° lbs 11,023Lifting capacity at max. height lbs 12,346Hinge pin height ft in 11’10.32” (11’8.35”)*Dump height at 40° ft in 9’5.78” (9’3.81)*Reach at 40° ft in 2’9.27” (2’11.24”)*Breakout force lbs 20,062

DIMENSIONS AND WEIGHTMax. lenght in transfer position ft in 19’4.28”Max. width in transfer position ft in 7’4.58”Tyre external width ft in 6’11.35”Track width ft in 5’7.32”Wheel base ft in 8’4.79”Ground clearance in 11.02 (9.06)*Max height ft in 9’5.7” (9’3.73”)*Standard operating weight lbs 17,328 (16,755)*Max. permissible weight lbs 8.350

NOISE LEVEL Noise level inside cabin ISO 6396 - LpA dB(A) 70Exterior noise level ISO 6395 - LwA dB(A) 101

*(...) With optional wheels 405/70 R24

*(...) With optional wheels 405/70 R24

The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding.Venieri reserves the right of carrying out possible changes at any time and without previous notice because of its policy of steady developement and improvement of the products.

WHEEL LOADER - “Z” LINKAGE 7.63B

7.63C9.63C

*(...) With optional wheels 405/70 R24

*(...) With optional wheels 405/70 R24 [•] Loading center 19.69 in

8’4.79” 6’7.92” 1.9

7”

42°

2’9.27”(2’11.24”)*

(9’3.8

1”)*

(3.9

4”)*

(11’8.3

5”)*

(15’0.9

1”)*

(9’7.6

7”)*

(9’3.7

3”)*40°

9’5.7

8”

11’10.3

2”

15’2.8

7”

9’9.6

4”

9’5.7

”31°

4’4.36” 8’4.79” 6’11.07”

50°

Full load bucket capacity (SAE)

Bucket width

Bucket weight

Overall operating height, fully raised

Forks lenghth (standard)

Forks lenghth (optional)

Hinge pin height

Dump clearance

Dump height

Dump distance

Max. dump distance

Bucket static tipping load, straight

Bucket static tipping load, full turn

Forks static tipping load, full turn

Payload EN 474-3 (80%) [•]

Payload EN 474-3 (60%) [•]

Breakout force

Total displacement lenght

External bucket turning radius

Standard operating weight

yd3

ft in

lbs

ft in

ft in

ft in

ft in

°

ft in

ft in

ft in

lbs

lbs

lbs

lbs

lbs

lbs

ft in

ft in

lbs

1.83

7’4.58”

1,102

15’2.87”(15’0.91”)*

11’10.32” (11’8.35”)*

40°

9’5.78” (9’3.81”)*

2’9.27” (2’11.24”)*

3’9.28” (3’11.24”)*

12,346

11,023

20,062

19’4.28”

17’3.48”

17,328 (17,108)*

1.44

7’4.58”

1,323

14’11.53”(14’9.56”)*

11’10.32” (11’8.35”)*

40°

9’7.75” (9’5.78”)*

2’7.3” (2’4.15”)*

3’7.31” (3’9.28”)*

12,566

11,244

22,267

19’2.12”

17’2.5”

17,108 (16,535)*

2.62

8’2.43”

1,323

15’4.45” (15’2.48”)*

11’10.32” (11’8.35”)*

40°

9’3.81” (9’1.84”)*

2’10.84” (2’7.69”)*

3’11.24” (4’1.21”)*

11,905

10,582

18,960

19’8.02”

17’8.8”

17,549 (16,976)*

/

/

/

/

3’3.37”

3’11.24”

/

/

/

/

/

/

/

8,267

6,614

4,960

/

/

/

/

PERFORMANCE DATA BUCKET BUCKET OVERSIZE FORKS

POWER TORQUE FUEL CONSUMPTION

UNIVERSAL MULTI PURPOSE

150

200

250

300

350

400

450

Md

[Nm

]

900 1100 1300 1500 1700 1900 2100 2300 2500Speed [rpm]

900 1100 1300 1500 1700 1900 2100 2300 2500210

220

230

240

250

260

270

be [g

/kW

h]

Speed [rpm]

0

20

40

60

80

900 1100 1300 1500 1700 1900 2100 2300 2500

P [k

W]

Speed [rpm]

DIESEL ENGINE4 cylinder in line engine, turbocharged with intercooler, com-mon-rail injection with electronic control, exhaust gas recircula-tion, water cooled, dry filtration, oxidation catalyst (DOC). Emis-sioned according to CE 97/68 - Tier 4i.

Type Deutz TCD 3.6 L4 Max. power 94,5 kW - 128 HP Rated rpm 2.300Power ISO/TR 14396 90 kW - 122 HPPower EEC 80/1269 90 kW - 122 HPEconomic working range rpm 1200 - 1800Max. torque ft-lbf 354Bore in 3.86Stroke in 4.72Displacement in3 221

ELECTRIC SYSTEMBattery 12 VoltCapacity EN 60095-1 110 Ah - 850 AAlternator rating 95 AReverse warning StandardWiring according to IP 67 - DIN 40050

TRANSMISSION Hydrostatic transmission with automatic power regulation and closed circuit with pumps and variable displacement en-gine. Gearbox with 2 mechanical selections: 2 work speeds (FWD/REV) and 2 road speeds (FWD/REV).

Work speed Forward Reverse1st gear mph 0 ÷ 3 0 ÷ 32nd gear mph 0 ÷ 8 0 ÷ 8

Road speed Forward Reverse1st gear mph 0 ÷ 11 0 ÷ 112nd gear mph 0 ÷ 25* 0 ÷ 25*

* Self limited max speed

AXLESTwo heavy duty equal size axles with planetary final drives in each wheel. Fixed rigid drive axle. Oscillation rear axle on rear chassis section up to a total angle of 25°. Transfer gearbox transferring movement directly to the rear and to the front axle via a transmission shaft. Self locking limited slip differential on front axle. Self locking limited slip differential on rear axle (optional).

BRAKESService: hydraulic multi-disc oil brake on front and rear axles. Parking: negative hydraulic on front axle, electrically applied.

TYRESStandard 17.5 x 25Option 17.5 R25 | 480/70 R24

STEERING Servo-assisted steering LOAD SENSING system.

Total steering angle 80°Inner tyres turning radius ft in 8’11.6”External tyres turning radius ft in 16’1.23”External bucket turning radius* ft in 17’8.83”

* Bucket on traveling condition

HYDRAULIC SYSTEM Two gear pump, the first for loader and steering circuit with LOAD SENSING valve, the second for the fan circuit with two rotating speed. Modular two-element control valve with main relief valve. Double acting hydraulic cylinders.Hydraulic oil cooling radiator. Full flow oil filter on the drain pipe. Joystick control with 4 position lifting system and with 3 position bucket system.

Max. flow gpm ...... 40.95Loader relief valve pressure psi 3,336Steering relief valve pressure psi 2,538Lift cylinder in 3.94x32.09Bucket cylinder in 4.72x14.96Lifting time (full) sec 4.6Lowering time (empty) sec 3.5Unloading time sec 1.8Total time of cyclus sec 9.9

SERVICES CAPACITIES Engine gal 2.11Front axle gal 4.65Rear axle gal 3.14Gear box gal 0,48Hydraulic circuit gal 36.19Brake circuit gal 0.29Fuel gal 42.27Water cooling gal 5.28

TECHNICAL FEATURESStandard bucket capacity yd3 2.35Bucket width ft in 7’8.52”Straight static tipping load lbs 13,669Full turned tipping load lbs 12,125Lifting capacity at max. height lbs 15,212Dump clearance ft in 12’1.67”Dump height at 40° ft in 9’6.17”Reach at 40° ft in 2’8.09”Breakout force lbs 18,960

DIMENSIONS AND WEIGHT Max. lenght in transfer position ft in 20’0.16”Max. width in transfer position ft in 7’8.52”Tyre external width ft in 7’2.42”Track width ft in 5’8.9”Wheel base ft in 8’7.74”Ground clearance in 15Max. height ft in 9’9.32”Standard operating weight lbs 19,842Max. permissible weight lbs 21,319

NOISE LEVELNoise level inside cabin ISO 6396 - LpA dB(A) 70Exterior noise level ISO 6395 - LwA dB(A) 101

WHEEL LOADER - “Z” LINKAGE 9.63C

The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding.Venieri reserves the right of carrying out possible changes at any time and without previous notice because of its policy of steady developement and improvement of the products.

7.63C9.63C

8’7.74” 7’0.65” 2.7

6”

9’6.1

7”

12’1.6

7”

15’5.0

4”40°

2’8.009”

10’1.2

6”

9’9.3

2”

37°

4’4.36” 8’7.74” 7’0.06”

43°

55°

[•] Loading center 500mm

Full load bucket capacity (SAE)

Bucket width

Bucket weight

Overall operating height, fully raised

Forks lenghth (standard)

Forks lenghth (optional)

Hinge pin height

Dump clearance

Dump height

Dump distance

Max. dump distance

Bucket static tipping load, straight

Bucket static tipping load, full turn

Forks static tipping load, full turn

Payload EN 474-3 (80%) [•]

Payload EN 474-3 (60%) [•]

Breakout force

Total displacement lenght

External bucket turning radius

Standard operating weight

yd3

ft in

lbs

ft in

ft in

ft in

ft in

°

ft in

ft in

ft in

lbs

lbs

lbs

lbs

lbs

lbs

ft in

ft in

lbs

/

/

/

/

3’7.31”

4’3.18”

/

/

/

/

/

/

/

10,141

8,113

6,085

/

/

/

/

2.35

7’8.52”

1,433

15’5.04”

12’1.67”

40°

9’6.17”

2’8.09”

3’9.08”

13,669

12,125

18,960

20’0.16”

17’8.83”

19,842

1.7

7’8.52”

1,653

15’2.91”

12’1.67”

40°

9’8.14”

2’7.5”

3’7.11”

13,889

12,346

21,164

19’9.99”

17’7.85”

20,062

2,88

8’2.43”

1,653

15’8.82”

12’1.67”

40°

9’3.54”

3’0.38”

3’11.99”

13,228

11,684

17,196

20’3.11”

18’1.76”

20,062

POWER TORQUE

PERFORMANCE DATA BUCKET BUCKET OVERSIZE FORKS

UNIVERSAL MULTI PURPOSE

FUEL CONSUMPTION

210

220

230

240

250

260

270

be [g

/kW

h]

900 1100 1300 1500 1700 1900 2100 2300 2500Speed [rpm]

200

250

300

350

400

450

500

Md

[Nm

]

900 1100 1300 1500 1700 1900 2100 2300 2500Speed [rpm]

0

20

40

60

80

100

900 1100 1300 1500 1700 1900 2100 2300 2500Speed [rpm]

P [k

W]

THENEW CABINA BREATHTAKING VIEW.

Take a seat in your customized control room. Create your ideal work space by adjusting the pneumatic seat and the steering wheel to suit your specific needs. Select the commands, all at your fingertips. Excellent visibility to 360° gives you the best view to work with maximum efficiency. The combination of breathtaking cabin and the latest state of the art of 4K linkage allows the maximum control of your attachments.

7.63C9.63C

OPEN SESAME!

The door with double opening allows the operator to work with the entrance door closed, with top glass opened, ensuring maximum ventilation even with the A/C off and without protruding parts out of shape.

In the new VF 7.63Cand 9.63C cabin

we minimized “blind spots” for superb visibility inall working conditions.

ARTIFICIALINTELLIGENCE.

Advanced man/machine interface, which constantly monitors the perfor-mance of the machine and communi-cates each diagnosis to the operator via a large and detailed LCD screen in the dashboard.

BEAUTY FINALLY MEETS FUNCTIONALITY.

The Venieri Design Centre,with the VF 7.63C and VF 9.63C new cab tried to merge function and style with the aim of become the best in the mar-ket. The new interior design has also allowed us to create different compartments useful for storing small tools, mobile phone, beverage, and more.

ENGINE ERRORSETTINGSLAYOUT BLAYOUT A

EASY CLEANF L O O R

EQUIPMENT

EQUIPMENT

FORWARD/REVERSE

7.63C9.63C

THE BLACK BOX.

For the first time on a Venieri cabin, all electronical control are positioned in a waterproof position accessible only from inside the cabin, easy to access and complete all diagnostics.

BE COOL.

The entire ventilation system has been rede-signed according to ISO10263 also ensuring easy maintenance to the heating and A/C unit.Using a single dashboard, the operator can choose the ideal temperature, ensuring maximum working comfort. (The VF 7.63C and VF 9.63C can be equipped with Venieri Climatronic).

EXT21°CAUTO 13:40

10° C

ENJOY THE SHOW.

The driver’s seat is equipped with the mostadvanced solutions in terms of comfort

for maximum operational efficiency.

CLASSEVOLUTIONCLEAN POWER,ZERO CONSUMPTION.NEW DEUTZ TIER 4i ENGINES

The VF 7.63C and VF 9.63C is powered by the new Deutz TCD 3.6 L4, a 221 in3 four cylinder unit awarded as best engine in his class. The impressive performance, reliability and durability distinguishing this engine have been made possible by adopting the most advanced technology, such as: electronical-ly controlled Common Rail injection, a turbocharger with intercooler and wastegate valve, and a proportional speed viscostatic fan, to mention but a few. The result is a minimum specific fuel consumption of just 0.46 lbs/kWh - an outstand-ing figure for an engine of this size - which, through the use of an external gas recirculation system and the diesel oxidatition catalyst (DOC) compliance with the Tier 4i emissions regulations and achieved.

› COMMON RAIL

In Deutz engines, injection pressures of 23,206.04 psi ensure that the fuel is atomised perfectly for maximised combustion efficiency, which not only reduces fuel consumption but also increased torque and power.

› THE DOC CATALYST

The DOC (Diesel Oxidation Catalyst) installed above the engine is a catalytic converter which transforms the most undesirable components of the exhaust gas into substances that are harmless for the environment. Unlike a conventional DPF (Diesel Particulate Filter), the DOC does not require energy-costly active regeneration cycles works with no additive reagents, they are also maintenance-free.

› ENGINE MANAGEMENT

To avoid unnecessary and unproductive fuel consumption, the engine is managed entirely electronically, to deliver only the power effectively needed for the job in hand.

Speed [rpm]

Md

[Nm

]

be [g

/kW

h]

be [g/kWh]

Md [Nm]

P [k

W]

0

20

40

60

80

100

200

250

300

350

400

450

500

210

220

230

240

250

260

270

900 1100 1300 1500 1700 1900 2100 2300 2500

Md

[Nm

]

be [g

/kW

h]

be [g/kWh]

P [k

W]

0

20

40

60

80

150

200

250

300

350

400

450

900 1100 1300 1500 1700 1900 2100 2300 2500210

220

230

240

250

260

270

Speed [rpm]

Md [Nm]

9.63C

7.63C Deutz TCD 3.6 L478 kW - 106 HP

Deutz TCD 3.6 L494,5 kW - 128 HP

7.63C9.63C

VROOOOOOOOM!

A top driving speed of 25 mph self-limited. We are in the Motor Valley and the speed is not an otpion. [limited to specific country regulation -TUV-].

MAXIMUM POWEREXACTLY WHERE YOU NEED IT.

A lot of power for the hydraulic system and, at the same time, a reduction of the travel speed. For theese reasons VF 7.63C and 9.63C wheel loaders need a single pedal. The brake pedal with inching function can control both the mechanical brake both the hydraulic (inching). Real advantages are less wear of the service brake and optimum distribution of engine power.

No pressureon the inching/brake pedal:maximum power for traction.

Normal pressure on the inching/brake pedal:

the speed reduction, the more power the hydraulic system service.

Maximum pressureon the inching/brake pedal:

the wheel loader stops,maximum strength to the plumbing.

SILENCE, PLEASE.

The noise inside the new cab is simply extraordinary: 70 dB only!

70dB INSIDE

O

OO

O

Venieri GLOBAL™ is our brand-new satellite monitoring system, which guarantees an increase in productivity by providing detailed information about the fleet and attachments, as well as an incredible amount of data to ensure the highest performance levels and greater economic efficiency.

Machine localisation Alerts history Maintenance planMaintenance history Load information Working hours Security control (engine block) Fuel consumption (total and partial)Fuel consumption while working Machine efficiency (while working)Detailed working hours Motion sensor alarm Curfew alarm setting

Standad O Optional X Not available

REAL-TIME LOCALISATION

PRODUCTIVITY REPORT

APP FOR SMARTPHONEiOS™ AND ANDROID™

FLEET CONTROL

Work shifts alarm Standard operating procedure history Energy-saving guidelines history Location log(map with locations and operating procedures) Information about diesel particulate filter Geo-fencingLocalisation and managment fleetMultiuser control with specific access policies List of “sleeping” machines Sms/e-mail notification Anti-theft alarm Parameters setting upon request

CABIN

SPECIALEQUIPMENT

BASIC

EQUIPMENT

MACHINE

• Standard O Optional –-- Not available

Battery main switchTool boxFuel preheating (cold climates)Plugs with keys for fuel and hydraulic tanksProportional self lock front differentialProportional self lock rear differentialDifferential lock 100 % engageable in front axleTrailer couplingWarning beaconSoundproofingSpare parts calatogueUser manualType-approval for road trafficSafety clamp for bucket and lifting cylindersAutolevelling ground level for bucketSpeed reduction kit„Venieri GLOBAL“ systemDouble-speed hydraulic fanReversible fan (for radiator cleaning)Hydraulic negative parking brakeService brake on both axles with separate circuitsInch pedal integrated in brake pedalGreasing points grouped on the frameAutomatic centralized greasing systemRide controlEngine preheating systemEnviromentally-friendly hydraulic oilHydraulic oil ISO 46 (cold climates)Cyclone dust separator

ROPS/FOPS 2nd Level, pressurized and soundproofedFront and rear windscreen wiper with washerHalogen work lights (4 front + 2 rear)LED work lights (4 front + 2 rear)Mobile phone compartmentBottle holderDocument compartmentSeat with mechanical suspensionSeat with pneumatic suspensionSeat with pneumatic suspension and heatingSeat armrestsBuzzerCabin carpetClothes hangersRadio preparationSupplementary socket 12VManual Air Conditioning„Climatronic Venieri“ systemCeiling lampSun visorRear view mirrorsHeatable rear view mirrorsFirst-aid kitFire extinguisher 4.41 lbsSeat beltInstrumentation and dashboard with LCD displaySafety glass breaker

Hydraulic or mechanical quick couplerCement mixing bucketMultipurpose bucket (4 in 1)Lifting forksAsphalt and cement planerSnow blowerSnow blade and “V” type snow bladeAngle-tilt dozer bladeHand operating hammerPolishing brushTrencherHigh tip buckethigh flow kitUnpressurized return pipeDouble auxiliary lineRear hydraulic line (single effect)

••O••OO••••••••OO•O••••OOOOO•

•••O••••OO••••••OO•••OOO•••

OOOOOOOOOOOOOOOO

••O••OO••••••••OO•O••••OOOOO•

•••O••••OO•••••••O•••OOO•••

OOOOOOOOOOOO-OOO

7.63C 9.63C