Upload
lamanh
View
214
Download
1
Embed Size (px)
Citation preview
INDUSTRY LEADING SOFTWAREYour total solution for simulatingvehicle manoeuvres
>> Create a 3D vehicle using custom roofline and ground clearance values for thefront, rear, and wheelbase of a vehicle.
AutoTURN Pro 3D is state-of-the-art CAD software that simulates 3D vehicle turning manoeuvre onsurface and mesh object terrains. Incorporating the trusted AutoTURN engine together with the patentpending process of generating a three-dimensional vehicle swept path envelope – engineers can design and
analyze in 3D while accounting for the effects of different terrain, obstacles, and vehicle parameters.
MODEL 3D VEHICLE SWEPT PATHS
Generate 3D swept path envelopes with vehicle height and ground clearancesto analyze designs in a three-dimensional space. Users also have the options todisplay the 3D swept path of the vehicle body or body clearance.Assess the cross-section of the 3D swept path at any instance along a 3Dsimulation. A punch through report can also be created showing the 3D sweptpath cross-sectional, the terrain surface, and the punch through line.
GENERATE 3D VEHICLE ARC PATHS
Analyze, and visualize in three dimensions by generating a 3D arc path directlyon a selected terrain (Civil 3D® surface, polygon and polyface mesh inAutoCAD® and MicroStation®). You can also convert a 2D simulation into 3Dby selecting a terrain. Boost your efficiency by completing a conceptualdesign in a 2D plan view while allowing for further analysis in a 3D mode.
»
»
EVALUATE VERTICAL AND GROUND CLEARANCES
Create a report displaying the terrain, vehicle, and clearance profile to check forspatial requirements between overhead obstacles and the design vehicle. Verticalclearance is not restricted to a straight line but can be analyzed at any point alongthe path of the simulation.
»
>> AutoTURN Pro 3D gives engineers the ability to respond to changes faster andoptimize designs with even better analysis and visualization techniques.
www.transoftsolutions.com
MODEL, ANALYZE, AND VISUALIZE IN 3D
>> By incorporating terrain elevation, overhead obstacle, and vehicle clearancedata together, issues are now detected and can be resolved using a 3D space.
DYNAMIC 3D VEHICLE CONFLICT ANALYSIS
Carry out a conflict analysis to detect where geometric objects in a designdrawing can interfere with the vehicle’s 3D swept path. The section of a 3D sweptpath will display in a different color indicating collisions with objects or terrain.
»
82
NEWVERSIONRELEASE
MODEL REAL WORLD SITUATIONS
You’re in the driver’s seat when managing design challenges. Use the combinedfunctionality of the SmartPath tools in a single simulation to model vehiclemovements for site planning. Negotiate tight turns for entrances and aisle ways.Use the Select Sweep tool to set vehicle alignment to existing CAD geometryfor carrying reverse manoeuvre for vehicles to a maximum of 3 parts.
>> Evaluate different vehicle turning scenarios for complex roadway geometry.
>> Powerful features make vehicle reverse manoeuvre easier than ever.Hatch vehicle body envelopes and swept paths to check for clearances.
THE WORLD’S MOST WIDELY USEDVEHICLE TURN SIMULATION SOFTWARE
26.4
30.9
29.3
::: 6.0
26.470.0
55
#6 #7
Angle Legend
Steering
1st Artic
2nd Artic
26.4
30.9
29.3
30.9
29.3
30.9
29.3
5.1%
NA
Sing
leU
nitT
ruck
TRA
NSO
FT
Sing
leU
nitT
ruck
TRA
NSO
FT
Single Unit TruckTRANSOFT
>> Check the drive path of large, complex vehicles carrying cargo to preventdamage to the load or surrounding structures.
29.8
49.4
ADVANCED DESIGN CAPABILITIES
Adaptive vehicle simulations are now linked directly to CAD geometry and can beplaced offset from or centered on user-drawn paths made from lines, arcs,polylines, complex chains, and even AutoCAD® Civil 3D® alignments. Vehiclepath simulations are automatically updated based on changes to the linked designgeometry meaning fewer iterations in the design process.
CONFLICT DETECTION FEATURES
Get real-time visual feedback when AutoTURN detects conflicts between avehicle simulation and objects such as curbs, median islands, sign posts, andstreet lights in the drawing. AutoTURN also includes the ability to recreate anexisting simulation accounting for any changes to the obstacles that interact withthe vehicle’s envelope.
»
»
>> AutoTURN improves the user experience by creating a direct relationship betweensimulations and CAD geometry enhancing the quality of your overall design.
ASSESS VEHICLE MANOEUVRES EASILY
Carry out multiple turning simulations using different vehicles andconfigurations to see if they can be accommodated by your designs. Evencomplex turning situations (roundabouts) are quickly and easily evaluated usingpowerful features like the Generate Oversteer Corner tool.
Other advanced options, like the ability to set steering linkage ratios betweenthe front and rear axle groups of multi-part vehicles, provide a more realisticrepresentation of how a vehicle would handle tight turning situations -very useful when generating articulated bus and truck movements.
»
SPECIALIZED TRANSPORTATION SYSTEMS
Large scaled construction and sustainability (e.g. wind farms) projects areincreasing meaning a growing number of oversized and more complex vehiclesnavigating roadways. AutoTURN now supports these specialized transportationsystems with new vehicle types including wind tower trailer, wind blade trailer,beam transporters, booster trailer, and 19-axle heavy haul.
»
»
» »
»
»
»
»
DESIGNS AHEAD OF THE CURVE
3D VEHICLES AND CUSTOM VEHICLE CREATION
• All national standard design vehicle libraries(AASHTO, TAC, Austroads, etc) includes 3D parameters
• Create or import your own 3D drawings for custom vehicles• Specify three different ground clearances (front, wheelbase, rear)
and the front and rear chamfer for a custom 3D vehicle• Ability to enter customized roofline when creating a 3D vehicle• Realistic 3D vehicle drawings supplied for the vehicles in the
TRANSOFT/TRANSOFTM librarieslibrary database
TURN SIMULATIONS AND SWEPT PATH ANALYSIS
• Place adaptive vehicle simulations on either centered or offset left/rightwith a smooth transitions option on user-drawn paths made from lines,arcs, polylines, complex chains and even AutoCAD® Civil 3D® alignments
• Link adaptive simulation to path geometry allowing for grip-edits• Conflict analysis feature provides feedback on vehicle path obstructions• Use the Regenerate Simulation feature on simulations to account for
conflicts that occur after obstacles have been added, removed, or modified• SmartPath tools for forward and reverse vehicle turn simulations in one
continuous motion• Perform 3-part vehicle reverse manoeuvre to any vector• Generate arc, oversteer, offset, and reverse corner simulations• Generate vehicle swept path envelopes from user-defined vehicle shapes
with chamfered corners or filleted radii• Define and hatch either the vehicle body or the vehicle’s outer swept path
envelope during a turn simulation
SPECIALIZED TRANSPORTATION SYSTEMS
• Override Angle for Special Transport is now independent of directionalchange in the articulating point for the trailer
• Create and simulate vehicles with independent rear steering systems(including crab steering for supported types)
• Ability to numerically input or use the mouse wheel to dynamicallycontrol the independent rear steering angle for specialized vehicles
• Create and simulate vehicles with telescoping trailers• Draw cargo for a vehicle simulation and combine the cargo envelope
with the vehicle body envelope• Define cargo size and set limiting factors for vehicle configuration
AutoTURN is the latest technology for vehicle swept path analysis and modeling. Simulating forward and reverse vehicle turn manoeuvre is now quick andeasy due to the four SmartPath Tools interactive drive modes that incorporate speed, superelevation, lateral friction, and turn radius algorithms.
>> GENERATE ARC PATHQuickly and easily create turn simulations, such as through roundabouts,by dragging your mouse and clicking from point to point.
>> GENERATE CORNER PATHProduce simulations using an entrance and exit tangent with the optionof setting a vehicle's speed and radius – ideal for designing intersections.
>> GENERATE OVERSTEER CORNEROffers a realistic representation of how a vehicle negotiates tight turningconditions; particularly useful for multi-part, articulated vehicles.
>> STEER A PATHFor areas with limited maneuvering space, you can freely drive a vehicleat speed by moving the mouse in the desired direction.
3D VEHICLE PATH SIMULATIONS
• Place a 3D vehicle simulation on a terrain using geometry for lines, arcs,polylines, and alignments (simulations are reactive and are updated whenchanges are made to the source geometry)
• Ability to generate a 3D vehicle simulation based on a pre-defined path• Ability to delete the last section of a 3D simulation for minor editing purposes• Input the 3D vehicle’s starting angle and speed associated with the simulation• Ability to display radius type and radius value for a 3D vehicle path movement
3D DESIGN AND ANALYSIS ABILITIES
• Perform 3D design and analysis by generating a 3D arc path directlyon a selected terrain
• Convert 2D turn simulations created with the 2D SmartPath Tools and PlaceAdaptive Simulation into equivalent 3D turn simulations
• Work with selected terrain generated from: TORUS and NEXUS gradingmodels; AutoCAD® Civil 3D® surface; AutoCAD® polygon or polyface mesh;MicroStation® mesh
• Ability to work on multiple terrain by choosing the current active terrain• Analyze a cross-section through the 3D swept path at any selected user point
for evaluating tunneling, spatial requirements near buildings or overheadclearance to structures
• Analyze both vehicle bottom and overhead clearance requirements on eithera straight line path section or paths with curves
• Section of the 3D swept path will display a different color indicating collisionwith an object or terrain
• Dynamic visual display of 3D articulation along the axis in a vehiclemovement simulation
3D PRESENTATION AND REPORTING FEATURES
• Use a sample library of 3D realistic vehicles or user imported realistic3D models for presentations
• Generate reports including ground profile, body profile, punch through slice,and punch through line
• Create a 2D report indicating the top of the vehicle body; lowest point alongthe path (i.e. ground clearance); obstacles (indicating locationsof intersections between the drive path and obstacles)
• Analyze Punch Through – draw a cross section of a selected 3D turnsimulation at a cutting plane line and create an annotated section detail
• Analyze Vehicle Clearance – create a graph showing the longitudinalprofile of a 3D turn simulation and crossing elements
For more information on AutoTURN Pro 3D visit our website at www.transoftsolutions.com
»
NORTH AMERICA - HEAD OFFICE
1.888.244.8387 (Toll Free US and Canada only)
Telephone 1.604.244.8387
Fax 1.604.244.1770
LATIN AMERICA
Telephone 1.604.244.8387
Fax 1.604.244.1770
EUROPE | MIDDLE EAST | AFRICA
NETHERLANDS OFFICE
Telephone +31 10 258 78 78
Fax +31 10 258 78 77
To download our software demos or to find out moreinformation about our products, please visit ourwebsite at www.transoftsolutions.com
Please note that some products are only available inspecific regions and languages.
ASIA PACIFIC | AUSTRALIA | NEW ZEALAND
1.800.107.106 (Toll Free Australia only)
Telephone +61 2 9387 7115
Fax +61 2 8905 9574
0800 449 662 (New Zealand only)
ATPRO82_PB_letter_0413
HOW TO CONTACT US
TAKE ENGINEERING INTO ANOTHER DIMENSION
VEHICLE LIBRARIES
• Includes national design vehicle libraries for: US (AASHTO, Caltrans),Canada (TAC),Australia (Austroads), UK, France, Germany, Italy,Netherlands,Austria, Norway, Sweden, Switzerland, Czech, Iceland,Denmark, New Zealand, Brazil, Israel, and South Africa
• Use specialized vehicle types including:Wind Tower Trailer;Wind BladeTrailer; Beam Transporter I and II; Booster Trailer; 19-axel Heavy Hauler
• Other vehicle libraries: Architectural and Transoft Solutions’ Realistic Type
REPORTING FEATURES
• Generate turn simulation reports showing vehicle speed, path lengths,and start conditions at each section of the simulation
• View graph report of a vehicle’s steering angle and multi-part vehicle’sarticulation angles when generating or placing a simulation
• View override/path angle for independent rear steering vehicles• Data can be exported to spreadsheets and standard document formats
COMPATIBILITY
• Autodesk® AutoCAD® 2007 – 2014 series of products(except AutoCAD LT)
• Autodesk® AutoCAD® Civil 3D® 2010 – 2014 alignments• Bentley® MicroStation® V8 XM, V8i• Bentley® PowerDraft (XM, V8i), PowerCivil (V8i)• Bentley® Power GEOPAK (V8i), Power InRoads (V8i)• Bricys® BricsCAD® (Pro and Platinum) V13 – V14• ZWSOFT® ZWCAD+TM 2014• Full support for 32 and 64-bit operating systems• System requirements:
Workstation:Windows® XP, Vista,Windows® 7,Windows® 8Network:Windows® Server 2000, 2003, 2008, 2012
PRESENTATION CAPABILITIES
• Control simulation playback (play, pause, high-speed scrubbing)through the Run Animation Dialog Box
• Use realistic vehicles plan profiles for simulations and animations• Manage vehicle animations with Transoft Solutions’ presentation
software, InVision, to create timed and sequenced events.Export files to video formats for PC viewing
VEHICLE CUSTOMIZATION
• Apply user-defined vehicle dimensions and profiles• Create vehicles or types for specialized transportation (e.g. rear steering)• Commonly-used types include: fire trucks, fire engine pumpers,
ambulances, garbage collection, semi-trailers, buses(articulated and double articulated), sport utility, pickup, and forklifts
• Add user-defined vehicles and types to the library database• Work with AutoTURN Extended Vehicle Libraries add-on content
POWERFUL DESIGN ABILITIES
• Set steering linkage ratios for ranges of steering angles between frontand back wheels for multi-axle semi-trailers, trucks and articulated buses
• Specify tire sizing (width and diameter) and space between the tires onthe same axle for a vehicle
• Choose track width for axle groups independently within a given part• Place, remove, or recall vehicles, active simulations, and active pathways• Modify and edit drawn simulations using Path Control• Add conical lines of sight to check mirror views, blind spots
and headlight paths• Create standard or custom turning templates using template generator
»
»
»
»
»